www.carre.fr

STRIP - TILL

The fuTure is in The row !

inro

Deep soil preparation . surface soil preparation . sowing, fertilising

front coMpacting rollers . crops anD grasslanDs Maintenance

Strip-till is a technology that was developed in the 80s in the United States with the purpose of simplifying tillage and limiting costs

This method consists in only working the row destined to accom-modate row crops (Maize, Beet, Sunflower, Rapeseed, Soya, etc.)

It’s an excellent compromise between working the soil with classic ploughing to prepare and warm the soil before plan-ting, and the direct sowing technique

The aim is to create a clean seedbed which encourages the development of microorganisms and thus a favourable growing environment for your crops

Strip-till was developed in order to achieve better results than in ploughing with less nitrogen, less water, less herbi-cides and less fuel

Using the INRO your agronomic results will:

- Create conditions conducive to better growing, due to warming and good crumbling of the soil

- Conserve better the water in the inter-row

- Facilitate seeding by conserving moisture

- Enhance good root development

- Ensure a healthier soil for the plot when it is reused for a new crop

- Improve the organic matter content and increase its available reserve in the soil and its resistance to drought. sTriP-TiLL is A MeThoD of eArninG

More BY worKinG Less!

The sTriP-TiLL: An econoMic ProGress

BenefiT froM cArre’s 75 YeArs of eXPerience AnD innoVATions

Over 75 years, Carré has become the undisputed specialist of the inter-row thanks in particular to its hoeing machines. Thus it comes naturally to us to develop avant-garde working tools designed for working on rows.

Located in the heart of an agricultural region, Carré develops the entire range of its products in partnerships with well-known cereal farmers. By buying Carré equipment you will therefore benefit from their know-how and their experience with their tools.

In 75 years, the company has received several innovation prizes and would like to accompany you in a sustainable management of your crops and to ensure you optimal performance.

BenefiT froM cArre’s 75 YeArs of eXPerience AnD innoVATions

sTriP-TiLL ADVAnTAGes

The INRO has been developed to optimize yields and reduce your costs.

You reduce your costs as you only work one-fourth to one-third of the actual surface, the residues left on site create a cover.

With this method you may:

- Reduce your fuel costs : you reduce the number of passes

- Apply fertiliser where the plant needs it most. Thus you reduce the losses caused by runoff or volatilization

- Be faster in your interventions

- Facilitate the management of your coverage, your crops benefit from what they can bring.

- Optimize the potential of your plot by shifting your rows by half a row from year to year

- Limit erosion and preserve the structure of the soils

sTriP-TiLL is A weLL-Known AnD efficienT MeThoD DeVeLoPeD To iMProVe Your YieLDs

Testimony of Mr. Drapeau, Strip-till user « I work in a semi-direct or TCS way for my fall sowings, and I wanted to go further for my spring sowings.My goal was to turn upside down the soil as less as possible and to encou-rage a good development of the maize. Secondarily, I knew that this tech-nique would allow me to gain time but this is not what I was looking for, my goal was above all things agronomics.Acknowledgement : The strip-till is a very good tool for line drawing. We keep the advantages of the semi-direct sowing with an inter-row mulching, which limits evaporation and weed banks. In the end, I got a nice levee for most of the different varieties I had made. They are regular. I have sowed 3 weeks after the strip-till pass and I didn’t have to make any modification on the CUMA seed drill.The moving off was equivalent to a TCS moving off, this is a good tool.My goal: I intend to do more next year by exploring the technique!”

A wiDe choice of chAssis To ADAPT To Your PrAcTices From 4 to 12 rows

fixed single beam chassisIt’s the best compromise in terms of lightness and strength, thanks to its single beamIdeal for a small variety of crops and conditions• Work from 4 to 5 rows from 0.45 to 0.8m• Choose the length and the number of rows that suits you• Short overhang

folding double beam chassis

The most versatile chassis of the range, it allows you to drive in complete safety• Highly modular, you adapt the spacing of your elements according to the crops desired• Work from 5 to 12 rows from 0.45 to 0.8m• Locking of the folded position (double valve, locking bar)

folding single beam chassisIdeal chassis for travelling on public roads. Folded, the INRO complies with the road standards (under 3m)• Work from 5 to 8 rows from 0.45 to 0.8m• Locking of the folded position (double valve, locking bar)• Reduced overhang and light weight to couple it to your medium power tractors

fixed double beam chassisIdeal chassis to use your strip-till in various plots and various cropsThe 2 beams ensure high strength and a wide variety of configurations• Work from 4 to 8 rows from 0.45 to 0.8m• Adapt the length and the number to your needs and your practices

sTAnDArD on our MAchines• Committed to providing you with a premium machine, you will find as standard the following elements.

Active safety to allow you to work with complete peace of mind. In the event of hitting a rock you don’t need to get down from the tractor, the tine

resumes its initial position alone, automatically and quickly.

non-stop hydraulic Adjustment without keysYou have 5 points to accurately adjust your INRO. Tine height, debris fender disc height, row width, disc inclination and roller depth. Your adjustments will thus be made quickly

and effortlessly !

sTronG PoinT => The parallelogramTo ensure optimum work, our research department has developed as support of the element a parallelogram which provides a good upkeep and facilitates correct setting. Its role is to guarantee a perfect follow up of the relief for an identical depth of work on all rows. The parallelogram may be adjusted manually or hydraulically, at your discretion, the setting is then made from the cab.

sTAnDArD on our MAchines

The inro eLeMenT: The fuTure is in The row!

Our aim: encourage a rapid development of the plant, avoiding development slowdowns across the entire surface and the entire row depth

Depth control wheelThe wheels mounted in pairs, guarantee a good working depth, they control the level

The debris fender discIt eliminates the debris to avoid pathogen risks, its depth adapts to obtain the cleanest line possible

The opening discIt opens the pass line of the tine and cuts the plant debris

Adapt your tools to your requirements

• Embossed disc Ø 500mmFacilitates cutting and

crumbling, on heavy soils

• Smooth disc Ø 500mmPreferable for light soils

The tineIt loosens the soil over a depth of between 50 and 300mmAdapt your ploughshare to your future crops

The deflector discIt maintains the soil on the row to accelerate warming and increase air circulation. Protects the inter-row from soil projections, and limits emerging weedsAdapt your disc to your practices

The rollersThey close the line and finish the reapplicationAdapt your roller to your needs

• Chain roller: better working solution, to break up the soil and encourage warming

• 20 mm point for crops in tight spaces (rapeseed )

• 50 mm point for working in greater depths, suitable for wide crops

• Corrugated deflector disc Ø 460mm

• Vortex disc Ø 460mmEncourages a clearer separation between the row and the inter-row, reduces pathogen risks

• Tyre rollers, they contribute to keeping moisture

• 2 gears for a better reapplication in dry conditions

sTronG PoinT => The parallelogram

• Disc Ø 350mm

eQuiPMenT PossiBiLiTies for oPTiMuM worK wiTh inroOur fertilizing tools may be mounted directly on your INRO. Our aim is to bring fertilizing as close as possible to the plant to encourage its development and its growth under the best possible conditions. This limits the losses due to

runoff or volatilization of the fertilisers.

iZifLo liquid fertiliser: choose a premium fertilizing tool• Large capacity tank with a choice from 600 to 800L.The adjustment of the application rate is made :Either under constant pressure, without variation linked to changes in the engine speed orin DPAE version which adjusts the pressure depending on your forward speed.

Fully control your fertilisers

• Our tank has a series of rotary nozzles for a perfect rinsing of the walls with its 80L fresh water tank.

• For your safety, you have an integrated 15L wash basin. The access ramp allows you to work at the right height and it has a toolbox and an integrated washing soap.

• Our tank is fitted with a manometer, whichs forwards informations to the cabin and an alarm when the tank is empty or a minimum quantity, which you parame-trize

• Our fertiliser adapts to a spacing between the rows between 0.45 and 0.8m. Tank placed on the chassis of the INRO, or on the front lift of the tractor. If you want to place it on the front lift, the rear-view mirrors are auto-matically included.

You are using solid fertilisers, we offer you a solution adapted to your needs !

• You are using solid fertilisers, we offer you a solution adapted to your needs

• Work with a spacing between the rows between 0.45 and 0.8m

• This equipment consists of a distribution head with 6, 8 or 12 outlets, a column of Ø 150mm, 2 metres of Ø 150mm tubes, Ø 63mm descent tubes, the air vent and Ø 35mm linking pipes

• Diffusers adjustable in height for a perfect distribution of your fertilisers

Permanently control the correct distribution of your fertilizers from the cab !

Control screen in cab

Liter / hectare

Circuit pressure

Remaining volume

Liter / Min or remaining distance

Hectare / Hour or remaining surface to treat

Speed

iZifLo liquid fertiliser: choose a premium fertilizing tool

You are using solid fertilisers, we offer you a solution adapted to your needs !

A wiDe choice of oPTions To ADAPT Your MAchine To Your neeDs

control wheel

• To help you maintain a constant height for the chassis’ beam, you may choose a pair of control wheels in order to avoid requesting the raising of your tractor

Lateral markers

• Let yourself be guided with precision thanks to the lateral markers! You will achieve greater driving comfort for the future semi

DO yOu wANT TO SOw AT ThE SAME TIME?

The INRO may be fitted with a 3-point coupling at the rear. You can therefore couple your precision seed drill.This option allows you to limit the number of passes on your plot, and to reduce your costs.

cArré ThinKs of eVerYThinG!

2 oPTions of reAr couPLinG:

• Mechanical rear coupling • Hydraulic rear lift

With the hydraulic lift you reduce the seed drill’s overhang on the tractor

• Standard transmission main bearing

This main bearing allows you to connect the trac-tor’s power take-off to that of your seed drill !

Control screen in cab

website dedicated to mechanical weeding: atoutbiner.fr

CARRÉ sas - CONSTRUCTIONS MÉCANIQUESZ.A. Les Fours • BP 6 • F • 85140 SAINT-MARTIN-DES-NOYERSTéléphone : +33 (0)2 51 07 82 35 • Fax : +33 (0)2 51 07 80 75Internet : http://www.carre.fr • E-mail : carre@carre.fr

Demonstration and sales contactYou are interested by this equipment, don’t hesitate to ask for a demonstration!A team of demonstrators is at your disposal to present you the equipment at your site un-der your conditions! Carré benefits from an international network of sale points in order to provide you with the best possible service in partnership with our trained and authorised resellers. Our technicians are at your disposal to ensure the good start-up and the correct setting of your machine, to help you start working with complete peace of mind!

Trust in 75 years of experienceCarré is a family company based in the Vendée. Since 1938 our mission is to design, manu-facture and distribute equipment dedicated to soil preparation, sowing and fertilizing, but also a complete range for crop maintenance. In order to do so, we dispose of a covered area of 8000² and we have the ISO 9001 certifications for our quality charter and ISO 14001 for our environmental charter.

Power TABLe AnD MAin PossiBLe confiGurATion

ClassiC inro versionsDesignation Element with opening discs Ø 500, serrated debris deflector Ø 350,

hydraulic non-stop tine, deflector discs, Ø 460 corrugated, chain rear roller

Example :Maïs

4 rangsINRO 4 rangs à 75 cmINRO 4 rangs à 80 cm

6 rangsINRO 6 rangs à 75 cmINRO 6 rangs à 80 cm

8 rangsINRO 8 rangs à 75 cmINRO 8 rangs à 80 cm

12 rangsINRO 12 rangs à 45 cmINRO 12 rangs à 50 cm

sè v r e

n149

n13 7

n16 0

n1 48

D9 4 9

D38

D9 48

D937

a8 3

a8 3

cHolet

pertuis Breto n

la roche-sur-Yon

les essarts

nante

les sablesd’olonne

sangers

niort

sortie n°5 de a83 les essarts

ST-MARTIN-des-NOYERS

nantes

Bordeaux

6551

3289

-FR-

INRO