STORAGE SYSTEMS DES IGNED TO MAKE

BUS INESS MORE PRODUCT IVE AND PROF ITABLE.

STORAGE SOLUTIONS TAILOREDTO YOUR NEEDS.

As the demands on business continue to escalate, so too the need

for fast, accurate storage, handling and distribution becomes

increasingly critical to business performance.

Dexion specialises in designing storage systems that make industry

function more productively and profitably. From binning and shelving to

pallet racking and carton storage with fully integrated control systems,

Dexion tailors storage solutions to meet any - and every - need.

NEED MORE INFORMATION?

Contact your authorised Dexion supplier and ask for a copy of

The Dexion Guide To Pallet Handling Systems and a copy of our

Lifetime Warranty brochure.

Dexion (Australia) Pty Limited ABN 83 000 083 956Head Office: Tattersall Road, Blacktown NSW 2148 Ph +61 2 9830 5000 Fax +61 2 9830 5001

www.dexion.biz

Dexion is a member of the Dexion Group. The following are registered trademarks: DEXION, Keylock,

Speedlock and Compactus. Whilst the utmost care is taken to ensure the accuracy of the information

contained herein it is provided in the understanding that the company shall under no circumstances be

liable for any injuries, expenses or other losses which may in any way be attributable to the use or adoption

of such data and/or design details. All dimensions indicated are nominal only. Dexion (Australia) Pty

Limited reserves the right to alter or amend without prior notice data and design details specified herein.

IND/12/02

DESIGNED TO BE THE BEST

Dexion is Australia’s largest single designer, manufacturer and

supplier of product storage equipment. It is also the only Australian

manufacturer that is part of an international company that

specialises in product storage.

Local knowledge. International strength.

Dexion operates in over 50 countries around the world. Its global

operations bring unrivalled design, technology, expertise and

manufacturing resources to the Australian marketplace together

with access to a range of highly sophisticated products that can only

be produced for international markets.

Setting the standards.

For over 50 years, Dexion has set the standards that others have

followed. Today, nothing has changed. Dexion is committed to

producing the best industrial storage products on earth in every

major category from pallet racking to shelving, dynamic storage

systems and binning.

An unparalleled commitment to research and development combines

with highly sophisticated manufacturing facilities, both in Australia

and around the world, keeping Dexion at the forefront of storage

system technology, performance and cost effectiveness.

Systems tailored to your needs.

From shelves and binning to pallet racking suited to everything from

small storage facilities with a few bays of racking to large scale

warehouses measuring in the millions of cubic metres, Dexion tailors

storage solutions to your needs.

When it comes to supply chain knowledge and storage that makes

business function productively and profitably, get the best in the

world – from Dexion.

2 3

Precision robotic welding ensures fail-safe

performance of all Dexion components.

THE MOST TECHNOLOGICALLY ADVANCEDPALLET STORAGE SYSTEM EVER CREATED.

Dexion Keylock has led the world in pallet storage for many years.

But to stay at the forefront of storage and handling technology (and

even further ahead of the competition), we made it even better.

We took the best pallet racking system in the world – and made it better.

Today’s Keylock was developed by an international team that saw an

elite group of Australian engineers work with Dexion’s Global Design

Department to create a system that married international technology

and manufacturing techniques with Australian design requirements.

The result is a triumph of technology and design that lifts pallet

racking to a new level of engineering sophistication and performance

excellence. Keylock has been designed to be the best in the world –

and it lives up to every expectation.

- Uprights and beams feature revolutionary new profiles. The unique

contours and new technologies such as tox stitching provide a load

bearing capacity that far exceeds conventional designs.

- There’s an extensive range of beams available from conventional

boxed and channel beams through to a revolutionary new I -Beam.

- Keylock remains compatible with preceding designs.

- Frame and beam sections come in a variety of sizes to

accommodate light and heavy duty needs.

- The symmetrically stiffened upright and beam

profiles maximise load bearing strength and

improve damage resistance.

4 5

The clearway between the connector and

upright enables easy adjustment of beams.

A typical installation in the

largest installed base of

pallet racking in Australia.

DESIGNED FROM THE GROUND UP TO BESTRONGER, LIGHTER AND MORE VERSATILE.

Uprights bear the full load of the pallet racking system. The transfer

of rack loads from the beams through the uprights is therefore

critical to overall system strength, safety and performance.

Strength where you need it.

The Keylock upright is designed to carry the rack load on the front

face – without twisting, distorting or stressing metal.

Connecting slots are positioned 14mm from the edges and take less

than 9% of the load bearing section. Conventional uprights often

locate slots less than 10mm from the edge and remove up to 2.5

times the amount of steel from the face.

The profile of the slots transfers the load vertically down the upright

and allows beams to connect without being wedged in so that side

loads are not imposed on the upright by the beam end connector.

Keylock uprights have a significantly deeper flange (side face) than

other conventional racking systems, providing greater overall strength

and rigidity and greater resistance to lateral impact damage.

Additional holes have been added to the back of the upright so base

plates can be fitted lower down for improved strength and rigidity.

- Uprights feature a symmetrically stiffened profile to maximise load

bearing strength and structural robustness of the racking.

- Uprights are available in lengths up to 8 metres and fit

easily together to meet any height requirement – and

they are reversible.

- Should accidental damage occur, it is restricted to the

obvious areas, rather than being transmitted

throughout the racking structure.

- There is an extensive range of baseplates from 4mm to

12mm thick.

6

A SYSTEM IS ONLY AS GOODAS THE SUM OF ALL ITS PARTS.

Every component of the Keylock system has been designed

and engineered to fit the most stringent design criteria and

global standards.

We’ve added strength where necessary. Enhanced design features

for greater flexibility and versatility. Improved impact resistance.

Made it easier to construct – and dismantle. And made it safer to

build – and to use.

Beams, uprights, connectors, base plates and bracing have been recently

redesigned. Component versus component, they’re the best in the

world, but it’s how they come together that makes Keylock unique.

It is a system that comes together – perfectly. It’s engineered to

perform above it’s stated criteria. And more importantly, it’s

professionally tested time and time again to ensure it does.

A breakthrough in design, construction and materials.

- Advanced engineering technologies and destruction testing has

delivered unsurpassed strength, flexibility and functional efficiency.

7

The I-Beam is designed to meet the

requirements of Australian Standard

4084, SEMA, FEM and RMI.

Base plates connect low on the upright

adding strength to the structure.

Uprights are available in painted

or pre-galvanised finish.

The best boxed beam in the world.

Dexion created the first boxed beam, and the world followed. But

today’s Keylock boxed beam is again streets ahead of the

competition.

- The Keylock boxed beam is a robust design strengthened by unique

rolled flanges. The two sections that form the beam are joined

down its entire length.

- Conventional boxed beams are often little more than two channels

tack welded together. Even a slight lateral impact can cause these

channels to separate.

The world’s best beam is well connected.

The connector is the vital link between the pallet rack’s load bearing

beams and uprights. The Keylock connector creates a clearway

between the side flange of the upright and the beam, ensuring the

load is safely carried on the front face of the upright where it belongs

without ever touching or loading the side of the upright.

Unique Dexion safety lock system.

- An automatic safety lock engages the second the connector clicks

into place, so there’s no chance of beams and uprights

accidentally parting.

- The Dexion safety lock is designed to prevent inadvertent

dislodging of a beam through careless operation. It is also

designed to sheer when excessive load is applied, thus preventing

damage.

A COMPREHENSIVE RANGE OF BEAMS FOREVERY PURPOSE.

Keylock includes a full range of beams that includes the revolutionary

I-Beam, the world standard setting Dexion boxed beam and a range

of special application beams including open, channel, stepped and

RHS beams.

The revolutionary new I-Beam

At the heart of the new Keylock system is Dexion’s I-beam - a

revolutionary design that has enabled a significant reduction in

weight to improve handling and construction without compromising

resistance to damage or load capacity.

- The I-beam profile distributes weight evenly around the total

perimeter of the section, reducing areas of excessive stress, and

thus optimising load carrying capacity.

- The I-Beam is structurally more efficient than conventional box

beams of the same weight, so the same load can be carried by an

I-Beam that is lighter, easier to handle and quicker to construct.

- The I-Beam is designed to resist lateral loads and

accidental damage.

- Using a patented new system known as Tox

Stitching, we’ve created a strong, rigid beam that

actually strengthens the structure. Unlike a tack

welded box beam, the tox stitched I-Beam will not

part with lateral pressure.

Tox Stitching

Tox Stitching

8 9

Fully welded box beam.

Strip welded I-Beam

SELECTIVE PALLET RACKING

Selective Pallet Racking is a cost effective storage system providing

direct access to all pallets. It provides high capacity storage, is easily

installed and adjusted, and has low equipment and capital costs.

- Pallets can be located, accessed and moved individually.

- Rapid handling of almost all types of palletised goods.

- Infinitely adjustable and offering a wide range of options and

components to accommodate specialised needs.

- Maximises space use in any warehouse configuration while

retaining optimum product accessibility.

- Strength and rigidity prevents compression damage to goods.

- Bottom level of pallets can be stored on the floor, lowering

structure costs.

% Average locations used 90%

% Immediate accessibility 100%

Stock rotation Good

% Floor utilisation 40%

10 11

The wide selection of beam

sections and lengths provides for

tailor made heavy duty shelving.

DOUBLE DEEP RACKING

Double Deep Racking stores two pallets deep, or four pallets deep in

a double entry rack. The system requires the use of a special reach

truck with either dual pantograph or sliding fork attachments.

- Can be protected against fork truck operator error and accidental

impact damage.

- Features frame and beam sections for light and heavy duty needs.

- Upper levels can be fitted with guide rails to assist in locating pallets.

% Average locations used 90%

% Immediate accessibility 50%

Stock rotation Average

% Floor utilisation 60%

NARROW AISLE RACKING

- Makes optimum use of floor area and roof height.

- High density storage with direct access to all pallets.

- The system is served by forklift machines with the mast

or fork head rotating to left or right as required.

- Operator cabins may be elevating or static.

% Average locations used 90%

% Immediate accessibility 100%

Stock rotation Good

% Floor utilisation 45%

12 13

DEEPSTOR HIGH DENSITY DRIVE-IN RACKING

Most high density drive-in pallet racking systems are little more than

conventional pallet racks, adapted and reinforced to meet the

stringent demands of drive-in applications.

Dexion’s Deepstor is a revolutionary drive-in racking system purpose

designed to provide the space efficiency and high volume storage of

block stacking, with easy access to pallets.

Unique self centreing rails automatically position pallets quickly and

safely, eliminating time consuming realignment.

There are no aisles and no cross beams, providing maximum space

efficiency. And because each pallet sits on its own support rails,

pallets are no longer stacked on top of each other.

Stable and highly space efficient, Deepstor provides maximum use of

storage volume together with fast input and retrieval of pallets.

- Available up to 12 metres high, Deepstor is tailored to pallet and

load size and handling equipment.

- Can be used with standard handling equipment.

- Rails adjust in 50mm increments to optimise space utilisation.

- Low profile cantilever arms maximise storage capacity.

Deepstor has a range of standard

damage protection systems

Unique self centring rails

position pallets quickly and easily

155 SUPPORT ARM

104562.5

92.5 CLEAR

1355 BAY CLEAR ENTRY

200 SUPPORT ARM

104562.5

OH=50

87.5 CLEAR

1445 BAY CLEAR ENTRY

Pallets without load overhang

Pallets with load overhang

14 15

DYNAMIC PALLET STORAGE SYSTEMSDexion gravity fed and powered mobile pallet storage systems offer

the flexibility to tailor installations to your exact requirements,

maximising both operating efficiency and storage capacity.

Pallet Flow ThroughPallets are placed on rollers that slope slightly downward. They are

fed in from one side, and retrieved from the opposite side.

- Very high density storage with up to 12 pallets in each bay.

- Eliminate double handling from receiving area.

- Gravity feed automatically replenishes the pick face.

- Automatic Braking System controls pallet speed ensuring pallets

are maintained end to end.

- Fork trucks never enter the rack.

Pallet Push BackPallet Push Back operates on Last In, First Out. Pallets are gravity

fed to the front and are stored and retrieved from the same aisle.

- Highly efficient use of space

- Reduces handling

- Fork trucks never enter the rack

Movo Mobile Pallet RackingCreates a single aisle between a block of racks when and where you

need it, by rolling power driven racks along the track system.

- Movo can be installed using existing racking structures.

- Powered aisle opening can be remote radio controlled, saving time

and improving efficiency.

- Storage capacity of ‘block’ racking without restricted access.

PALLET IN& OUT

PALLET INPALLET OUT

16 17

PALLET RACKING ACCESSORIES

Rack Protection

Any damage to racking will reduce its load carrying capacity. Dexion provides

a range of rack protection accessories designed to safeguard racks from

accidental damage. Rack protection accessories include: Column Guards,

Rack Sentry, Offset Racks, Upright Protectors and Step Back Racks.

Column Guards

The Column Guard is bolted to the floor in front of the uprights to a height of

360mm providing protection from forklifts to the bottom portion of the upright.

Rack Sentry

Rack Sentry is a revolution in rack protection. It’s moulded from a semi-

flexible, stress resistant plastic and uses a patented air cushion system.

It’s ultra light to handle, installed in seconds using velcro straps and brightly

coloured for greater visibility. It is also easily removed for relocation.

Storage accessories

A range of accessories are available to tailor pallet racking to specific needs

and applications. Standard accessories include:

Pallet Support Bars

Supported at each end by the beams, Pallet Support Beams provide a

secondary support member for pallet racking or shelving. The Pallet Support

Bar is designed to have its top surface approximately flush with the beams.

Fork Entry Bars

These are used when unsuitable pallets or unpalletised loads are to be

stored on beams and handled by forklift trucks. The Bars provide a gap of

approximately 75mm above the beam for forks.

Mesh Decks

Clip on Wire Mesh Decks minimise the build up of dust and increase light and

visibility in warehouses. Standard sizes are 1350mm x 840mm and 1250mm

x 840mm. Both are available as standard or heavy duty.

PALLET RACKING MAJOR COMPONENTS

The Keylock System

Dexion Keylock is one of the easiest pallet storage systems in the world to

design and construct. It can be configured as either a single entry or double

entry rack. The basic rack consists of:

Frames: Two upright members joined together by bolted bracing.

Beams: Horizontal load bearing members that slot into the uprights.

Uprights

A wide variety of upright grades can be used to provide rack heights up to

30 metres. Uprights are punched with symmetric hexagonal slots at 76mm

intervals for beam height adjustment and are reversible. Keylock uprights

are available in either a lead free painted finish or pre-galvanised finish.

Baseplates

Baseplates provide a smooth bearing surface for the upright, spread the

load of the upright over a larger area of the floor, provide a means of

securing the upright to the concrete floor and a means of levelling the rack.

Dexion has an extensive range of baseplates to satisfy virtually every need.

Beam End Connectors

All beams are factory welded to beam end connectors and fitted with safety

locks that are designed to resist accidental uplift from pallet handling equipment.

Beams

There are six beam types available as standard: I-Beam, boxed beam, open

beam, channel beam, stepped beam and RHS beam.

Boxed Beam

Open Beam

ChannelBeam

SteppedBeam

RHSBeam

Column Guard

Fork Entry Bars

Mesh Decks

Pallet Support Bars

Rack Sentry

I -Beam

18 19

SPANDEX SHELVING SYSTEMS

Spandex industrial shelving is a sturdy, versatile and easily assembled

storage system that provides heavy duty capacities at low duty

prices.

Spandex’s close tolerance high performance components make it

suitable for high rise and multi-tier applications.

Spandex Multi Tier utilises unused head room providing greater

storage efficiency.

Spandex Industrial is strong and durable, catering for bay loads of up

to 1500kg in bay widths of either 900mm or 1200mm.

From one or two bays to major installations, Dexion Spandex is quick

to install and extremely cost effective. And because Spandex is used

by so many companies and in so many applications right across

Australia, it is readily available.

Spandex meets the robust

requirements of machine shops, parts

stores and warehouses, yet looks

smart for office and point of sale use.

21

ULTIMA

Ultima is a revolutionary shelving system made in Dexion’s state-of-

the-art manufacturing facility in Europe.

Unparalleled quality, precision engineering and adaptability make

Ultima the best large scale shelving system in the world.

Ideally suited to large projects, Ultima combines the structural

strength required to form multiple tiers, bridges and walkways with

the flexibility necessary to accommodate a broad range of storage

and order fulfilment needs.

An extensive range of purpose designed accessories form an integral

part of the Ultima system. Each one is tailored to specific needs, fits

perfectly, and functions flawlessly.

Components slot together forming a rigid, durable structure that’s

quick and easy to assemble, rearrange or dismantle for relocation.

Ultima is a versatile, heavy duty shelving system with:

- Infinite flexibility with heights from 1 to 15 metres, depths from

300 to 1000mm and shelf widths from 765 to 2500mm.

- Load capacity up to 400kgs per shelf and over 5 tonnes per bay.

- Can be constructed in single tier or

multi-tier with suspended walkways,

mobile shelving or over-rack platforms.

- Product can be accessed from either

side as there are no support braces.

- Adapts to future needs including fully

automated product picking.

Accessories

Ultima’s accessories include drawers,

lockable doors, plastic bins, tyre racks,

shelf dividers and retractable desks.

22 23

Ultima is suitable for large scale

and multi-tier designs.

LONGSPAN

Longspan is a strong, durable, versatile – and economical – shelving

system that looks good and minimises lost space from uprights

making it ideal for a wide variety of applications from archives to

automotive, factories, warehouses, retail, wholesale and commercial.

- High density storage of small items

- Storage of large, heavy and bulky items

- Storage of long, odd-shaped or awkward items

Long and strong yet easy to install

Longspan has fully adjustable shelf heights, spans of up to

2710∑mm, shelf loads up to 700kg and a bay load capacity in excess

of 5 tonnes, so it’s suitable for everything from small parts through

to long, heavy or bulky goods. And because it uses a modular design

and bolt-free lock-in system requiring no special tools, it’s installed in

minutes.

Single tier, multi-tier, high rise, mobile and more

Longspan’s versatility gives one system for a diversity of needs:

- Multi-Tier maximises storage capacity of small to medium items

- High-Rise configurations meet the demands of high density narrow-

aisle and automated stock picking systems

- Mounted on mobile bases, Longspan provides high density storage

for less frequently accessed small to medium size items

- Carton Live Storage configurations suit order picking applications

Bolted frames for strength and reliability

Longspan incorporates a wide range of beams and frames making it

easy to customise to precise storage needs. Different bay lengths

can be combined to store a wide range of items while purpose

designed accessories extend versatility even further.

- The range of beams and frames make it easy to customise

structures to specific requirements and building dimensions.

- Combines high density storage with the flexibility to adapt to

changing needs and changing product lines.

- Steel, timber or wire shelves that can be loaded from both sides.

24 25

Longspan’s versatile modular design makes it suitable for a wide

variety of applications

Multi-tier installations providehigh capacity with cost effective use

of available height

Beams clip quickly and easily intouprights without bolting and are secured

with a safety lock

Two beam styles are available -One-Piece and Heavy Duty. Both rotate

giving a choice of step or flat top.

MARLBRO SHELVING

Marlbro is strong, easily adjusted and simple to build. Its beams clip

easily into the pre-punched frames and the wire shelves drop into

position. Marlbro can also be readily relocated once constructed.

Although designed as an all purpose shelving system, Marlbro’s non-

porous, corrosion resistant finish make it particularly suitable for

cold storage.

- Electroplated zinc finish with a special lacquer dip to decrease the

risk of food contamination.

- Suitable for linen storage in hotels, merchandising and cold

storage. Also suitable for home, office and archive storage.

- Marlbro can be incorporated into a Compactus Freetrack system

to maximise use of valuable floor space.

Attractive and corrosion

resistant, Marlbro is well suited

to retail operations

The Marlbro system consists

of end frames, beams and

shelves which clip together easily

Like all Dexion shelving, Marlbro converts to mobile storage for higher capacity

26 27

SLOTTED ANGLE

Slotted Angle provides simple, cost-efficient solutions for virtually any

storage requirement. The unique pre-punched hole pattern allows

multiple steel sections to be bolted together to form sturdy shelving

and storage systems.

Combining steel shelves with Slotted Angle uprights provides one of

the most versatile and economical shelving systems available.

Shelves range in depth from 300mm to 900mm. Standard width is

900mm and an option of 1200mm is also available.

With a wide range of heights, depths and lengths, Slotted Angle is a

quick and easy storage solution for stores, workshops, warehouses

and wherever a cost effective and easily assembled shelving unit

makes a difference.

- Slotted Angle is used in a wide variety of applications including

shelving, benches, trolleys and light construction work.

- It is sturdy, tough, adaptable, rigid when assembled, easy to

relocate and ideal for special purpose designs.

160 ANGLESize: 40mm x 40mm X 1.8mm.3810mm lengths.2286mm lengths.(Cut to size lengths also available).

225 ANGLESize: 62mm x 41mm X 1.8mm.3810mm lengths.(Cut to size lengths also available).

260 ANGLESize: 66mm x 44.4mm X 2.5mm.3810mm lengths.(Cut to size lengths also available).

PUNCHED STRAPSize: 38mm x 1.8mm.3048mm lengths.

NUTS AND BOLTSStandard: Hexagon head.8mm x 16mm long.Zinc plated. Packs of 100.

CORNER PLATESUsed for bracing Slotted Angle structures.

BASE PLATESUsed to spread load.

Components are

available in enamel finish

for lasting protection

28 29

30 31

BULK AND ARCHIVE MOBILE STORAGE SYSTEMS

Compactus Multi-Bay

Compactus Multi-Bay achieves maximum space saving in the office

or small archival environment. Its fixed floor track caters for uneven

floor surfaces.

- Base lengths up to 6.6 metres.

- Crank-Driven to move block-loads up to 20 tonnes.

Application Guide:

Ideal for the bulk storage of any regularly accessed item in the

office, retail storage area, library, warehouse or small archive.

Compactus Archive

Compactus Archive is a state-of-the-art, high volume storage unit. Its

variable gearing enables the operator to move very heavy loads of up

to 40 tonnes with absolute ease.

- Base lengths up to 17 metres.

- Crank-driven to move loads up to 40.5 tonnes.

Application Guide:

Exacting standards to stand the test-of-time. Is the

leading system for the long-term storage of items

in archives, museums, libraries and galleries.

Compactus Power3

Compactus Power3 offers high capacity storage with a wide range of

intelligent operating functions controlled through a ‘one-touch’ pad.

- Soft start and stop ensures vibration-free, safe movement.

Stopping distance can be adjusted.

- Programmable using transponder keys or via your PC. Has easily

set access authorisations.

- Can be linked to climate control, lighting or fire alarms. It also has

a night time setting option.

Application Guide:

Ideal for the bulk storage of documents or items that are

frequently accessed, or where long-term security is a priority.

Multi-Bay’s design

lines complement today’s

office décor

SELECTA-FLO

Dexion Selecta-Flo is a gravity fed order picking system designed to

increase order picking efficiency while saving on valuable floor-space.

- Selecta-Flo delivers efficient full-carton and split carton order

picking with low capital outlay and low operational costs.

- Saves on labour by providing a more orderly picking system. Order

pickers work in the front aisle while replenishers work in the back

aisle, completely separated from the pickers.

By presenting the widest range of products within easy reach of

order pickers, Selecta-Flo eliminates much of the walking and

searching time. The ‘items picked per hour’ is dramatically increased.

- Selecta-Flo reduces labour costs and increases efficiency.

- It is strong, modular and uses gravity, so has no running cost.

- Provides automatic stock rotation and allows instant stock checks.

- Dexion Selecta-Flo is your answer to live storage order picking.

With Selecta-Flo, first-in first-out

stock rotation in any given storage

lane is assured, which is essential

when handling perishable goods

32 33

Standard bed

with same length

Standard bed with variable

length for a lane jutting out

Shallow drop-out tray for

picking out of carton

Deep drop-out tray for

picking out of carton

P5

P10

P20

P30

P60

P40

P45

MAXI BINS

Maxi Bins are is a flexible small parts storage system with seven bin

sizes, five colours and louvred panels that enable you to design your

own system.

The Dexion Maxi range has bins that stack and bins that divide.

There are accessories from hooks, hangers and trolleys and

demountable panels as well as large scale binning systems.

Louvred Panels form the Backbone of theMaxi Small Parts Storage System.

The steel panels allow all sizes of Maxi Bins to hang in a high density

configuration. Panels are finished in Grey.

Panels are 457mm wide and can support 68kg of stock for

each 305mm height of panel. Single sided panels available in

three heights.

Free Standing Racks

Double sided panels with rack feet (rack feet sold separately)

– available in two heights – 1375mm and 1840mm.

Bench Unit

A small free standing louvred panel for bench top and workstation

use. Size: 457mm square. Finish: Grey.

STACK-A-BINS

Available in a variety of shapes sizes and configurations to suit

individual storage needs, Stack-A-Bins can be stacked, mounted on

walls or mounted on Dexion Maxi louvred panels.

Stack-A-Bins are light in weight, easy to handle and non-porous. The

range includes: Visi-Paks, Spare Parts Trays and Drawer Organisers.

SELF STACKED BINS

The interlocking design of Maxi Bins ensures secure stacking and

prevents the bin from splaying under load. The P5 bins slot together

for easy carrying. The P30 and P40 have recessed handholds. The

P60 has a removable zinc plated bar, which facilitates easy stacking

of full bins.

Ref. Width Depth Height Dividers Maximum Panel*(Optional Extra) Loading Density

mm mm mm kg

P5 100 120 60 N/C 2 52.5

P10 100 178 85 N/C 5 35.0

P20 135 225 125 N/C 9 19.7

P30 205 280 165 ONE 14 10.5

P40 410 280 165 TWO 18 5.3

P45 160 425 130 SEVEN 13 6.5

P60 410 457 216 THREE 27 4.4* Panel density is the approximate number of bins that will

fit into a linear metre of standard 457mm wide panel.

LP72 – 1829mm.

LP36 – 914mm.

LP18 – 457mm.

Chrome plated hangers enable P5 and

P10 Maxi bins to be hung on peg-board.

Peg Board Hanger

Hooks are available to hang awkward items.

Louvred Panel Hooks

35

Made from highimpact styrene,

Drawer Organisersare a convenient,

free standingdrawer unit for

small parts storage

RAISED STORAGE AREAS

A raised storage system is the fast way to add extra floor space

within the shell of an existing building. In fact, you can virtually double

your floor space without changing premises - or increasing your rent.

Raised storage areas provide the means to create separate zones

within one centralised facility, so you can separate areas for bulky

items, fragile items, warehousing and despatch, fast-moving and

slow-moving stock, and so on.

Each installation is tailored to the site and the load-bearing

performance required – maximising economy and safety.

Racking Application

- Raised storage areas made from Dexion racking are quick to install

and are compatible with most existing warehouse storage systems.

- Longspan shelves are readily added above or below floor.

Shelving Application

- Low on cost, high on versatility, Dexion shelving is the fast,

economical way to add a raised storage area.

- Open or closed framework for security or air circulation.

Double your storage space with a raised storagearea. Raised areas can be added to either part or

all of most existing single level storage systems.

36 37

CLEARSPAN

Dexion Clearspan is a cost efficient adjustable light duty cantilever

racking system designed to accommodate long and awkward loads.

It provides easy accessability together with support along the full

length of the item being stored.

Clearspan is available in both single sided and double sided

configurations. The double sided rack provides maximum storage

capacity on a single central column while the single sided rack is

designed to fit flush against a wall.

Compatibility with other storage equipment

Dexion’s proven Keylock pallet racking components are used to

construct Clearspan, so different options can be easily and

economically designed and built to meet specific requirements.

- Suitable for storage of extra long or awkwardly shaped items.

- Allows for optimal use of horizontal space when storing bulky items

like furniture and white goods or long items like timber and steel.

- Storage arms are connected to the upright frame allowing easy

adjustment of the arms at 76mm increments.

- Arms can be placed at desired levels to fully utilise available space.

Storage arm height is adjustable in76mm increments to accommodateloads of almost any size.

ROLLRACK

Dexion Rollrack is purpose designed for storing long and easily

damaged materials such as rods, piping and beams.

The rack contains a number of cradles, each fitted with ball-bearing

wheels running on rails. Products to be stored are placed in the

cradles and then easily moved in and out of the storage position.

Ideally suited to high volume movements of long loads, Rollrack can

achieve time savings of up to 80% over static rack

Rollrack makes light work of an otherwise difficult, cumbersome and

often dangerous task.

Rollrack’s ball-bearing mounted travelling cradle

has revolutionised the handling and storage of

rods, piping, beams and other long materials.

Low initial costs, reduced handling

costs and effective use of space

38 39