steinel home catalogue en

HOME

D Efficient Lighting for the Home.

Motion Detectors

SensorLights for Outdoors

SensorLights for Indoors

LN 1

IS 360 D

IS 130-2 IS 140-2 IS NM 360 IS 180-2 IS 240 IS 1

IS LED 2in1

L 330 S L 331 S L 306 S L 309 S L 262 S L 11 L 12

GL 60 S L 260 S

L 265-5 L 265 S L 270 S L 271 S

L 860 S L 867 S L 876 S L 170 S L 190 S

GL 16 S

Nightmatic Nightmatic2000 3000 Vario

SensorLight SensorLight SensorLightplus 11 W plus 15 W plus 18 W

Stainless-Steel SensorLights for the Wall

Page 48 – 51

Photoelectric Lighting Controllers

Page 30

Low-Energy Light with Integrated Photoelectric Lighting Controller

Page 31

Infrared Sensors for Wall Mounting

Page 18 – 23, 25

Sensor Systems for Outdoors

Motion Detectors Page 14 onwards

Infrared Sensor for Ceiling Mounting

4

Infrared Sensor with LED Light

Page 26 – 27

Low-Energy Lamps with Integrated Photoelectric Lighting Controller

Page 32 – 33

Photoelectric Lighting Controllers Page 30 onwards

SensorLights Page 34 onwards

Stainless-Steel SensorLights for Gardens and Walls

Page 52 – 53

SensorLight for the Garden

Page 54 – 55

SensorLights with Effect LED

Page 36 – 39

SensorLights for the Wall

Page 40 – 47

DL 750 S DL 850 S

XLed HS 150 HS 300 HS 500 HS 5140Home 1

RS 10-1 L RS 100 L RS 16 L RS 16-2 L RS 16-3 L RS 13 L RS 10-3 L RS 21 L

FRS 20 FRS 30

BRS 60 L BRS 61 L BRS 65 L BRS 66 L

IR 180 AP HF 360 AP IR 180 UP HF 360 UP NF 50 UP

L 706 S L 726 S L 746 S L 15 L 560 S L 562 S L 115 S L 535 S L 1

LED Halogen

Face- Power Universal Dimmerplate socket switch

Sensor Technology at a Glance

Page 96 – 97

High-Frequency SensorLights for Garages, Corridors and Basements

Page 88 – 89

Classic SensorLights for the WallPage 56 – 65

High-Frequency SensorLights for Bathrooms and Hallways

Page 86 – 87

Sensor Systems for Indoors

SensorLights for Ceiling Mounting

Page 66 – 69

Sensor-Switched Floodlights

Page 70 – 75

SensorLights Page 76 onwards

SensorSwitches for Surface/Concealed Installation

Page 92 – 95

Motion Detectors Page 90 onwards

Installation Components

Page 95

High-Frequency SensorLights for Wall and Ceiling Mounting

Page 82 – 85

Overviews Page 96 onwards

Presentation Systems

Page 98 – 103

4

Highlights for People of Today

5

Steinel. The original.Products for People and the Environment

Intelligent energy saving. It was with this visionthat STEINEL invented the world's first SensorLightover 20 years ago. A milestone in convenience, safe-ty, security and saving energy. As a result, everyonetoday can help reduce CO2 emissions and slow downclimate change. Yet with intelligent lighting controlfrom STEINEL, you're not only doing the environmenta favour: Using less energy saves you money andlight that switches 'ON' automatically brings signifi-cantly more convenience to everyday life. This way,people and the environment benefit from our idea.Treat yourself to the original! Because "made bySTEINEL" is synonymous with practical functionality,quality and long life.

As brand and technology leader, we develop andmanufacture products of world renown at five locations in Europe. In German Quality.

Our strength – the benefits to you:

� In-house research and development with

toolmaking and prototype construction.� In-house production of electronics, plastics

and injection mouldings.� Quality management system certified to

DIN EN ISO 9001 and products that carry all of the relevant test marks.

66

Technology for lifeWe develop products that benefit people. This mission statement alsoincludes our ecological responsibility. For instance, intelligent STEINELsensor technology ensures maximum energy efficiency in lighting appli-cations, significantly easing the strain on the environment. And we alsopay strict attention to ecological compatibility in developing and manu-facturing our products. To this end, we have established a uniform standard at all STEINEL sites across the globe incorporating all relevantnational and international guidelines. Among other aspects, this alsoimplements the comprehensive RoHS guideline on the restriction of theuse of certain hazardous substances in electrical and electronic equip-ment. As part of its product responsibility, STEINEL is also involved inimplementing the German Electrical and Electronic Equipment Act(ElektroG).

Brand with responsibility

To us, responsibility is a commitmentthat covers all parts of our company andeverything it does: product quality, inno-vation, service and sustainability.

7

Quality

For Steinel, German quality is a challenge and a commitment. We meet this commitment with expertise from over 50 years of manufacturing practice and our own factories in Europe. With every day that passes – with every item weproduce. Quality made in Europe. This is why it goes without saying that ourproducts carry a 36-month guarantee on proper working order. And, of course, STEINEL has been awarded certification under the current standard on quality management.

Innovation

Our strength is innovation. We not only invented the sensor light but continue toplay a key part in constantly improving its technology. Watt-o-matic, mini-sensor,the HF-sensor system and the use of highly efficient LED technology are just someof the forward-pointing innovations that distinguish STEINEL as a pace-setter inenergy-saving lighting concepts.In-house development and design ensure that we will remain technology and brandleader in energy-efficient lighting concepts in the future too.

Service

As a quality-focused brand manufacturer, we attach importance to first-classservice. We will be pleased to provide you with help and advice on any matterconcerning sensor technology. Also typical STEINEL is the guaranteed availabili-ty of replacement glass shades over a period of 5 years.Our own merchandisers and trained sales representatives provide optimum sup-port at the point of sale, for an effective replacement-part and repair service thatguarantees maximum customer satisfaction. A hot line is available for urgentmatters (+49 (0)5245 448 188).

Sustainability

We take our responsibility seriously. For STEINEL, adhering to European legisla-tion and work regulations at all of our factories for the well-being and protectionof staff and the environment goes without saying. On top of this, we keep trans-port distances short to reduce CO2 emissions and ensure that on reaching theend of their useful life products are disposed of in a way that is kind on the envi-ronment. Plastics are recycled wherever possible.Not least, we use plastics and components that last for a long product life toease the strain on the environment.

Quality managementsystem

DQS-certified to DIN EN ISO 9001: 2008

8

Light only when it's needed.

About 19% of the energy used world-wide goes on light-ing. This equates to an annual demand of about 2,650 terrawatt-hours. Much of this gigantic amount is wasted – partly by leaving lights switched 'ON' unnecessarily.

With sensor technology from STEINEL, wasting this resourceis a thing of the past: Light comes 'ON' automatically whenyou enter a room. And switches 'OFF' again when youleave. What's more, using low-energy lamps with our sen-sor lights is not a problem either. This way, lighting fromSTEINEL helps to save huge quantities of energy, CO2emission and costs. Besides this: Lights that switch 'ON' automatically enhance everyday convenience, safety and security.That's "intelligent energy saving".

Light 'ON'. Light 'OFF'. Controlled by sensor. You will also find a program on our website that can calculate energy savings exactly.

Intelligent Energy Saving

www.energieclevernutzen.de

9

Mission to Save Energy

The optimum solution for any situation

Energy-saving sensor technology fromSTEINEL can be used wherever light isneeded.Whether indoors or out, spot lighting orilluminating large spaces: Using the sen-sor products from the brand and technol-ogy leader, environment-friendly lighting isachievable here and now. This way, every-one can help to make a better future.

1010

23 °C 35 °C

Sensor Systems for Outdoors

Light 'ON'. Light 'OFF'.Sensor-controlled

Heat radiation as a remote controller

The heart of a PIR sensor system iswhat's called a pyro-sensor. Thiselectronic component responds toany fluctuation in incident infraredheat radiation with a change in volt-age.

As all individuals give off infraredradiation through body heat, theyautomatically change the thermalimage detected by the sensor onentering the system's field of vision.The sudden rise in voltage thiscauses is processed by the elec-tronics for switching 'ON' light.

For sensor systems to respond tomovements within the detectionzone, they are equipped with a seg-ment lens. This divides the pyro-detector's field of vision into activeand passive zones (zones not visibleto the sensor). When a heat sourcecrosses a zone boundary, the IRradiation received changes for thesensor which then emits a signal.

Multi-sensor technology

STEINEL has developed the multi-sensor system for applications plac-ing particularly exacting demandson the size of the detection zone.Within the system, two or even threepyro-sensors are positioned at aspecific angle to each other thatadds their detection zones together.

Automatic lights are created byusing motion sensors. This is wheretwo different technologies areemployed: HF-sensors (see page76) are the ideal solution for indoors.Outdoors, only passive infrared (PIR)sensors are used.

Segment lens

Active area

Passive area

Pyro-sensorDetection angle

Heat radiated from the humanbody

Any object with a temperatureabove absolute zero (-273° C) gives off electromagnetic radiation.Given the temperature range of thehuman body, this radiation lies inthe infrared portion of the spectrum.It is used by infrared sensors todetect people moving.

The segment lensfocuses IR radiation from its sur-roundings onto the sensor anddivides the areas covered in activeand passive zones (zones maskedout for the sensor). The boundarybetween these zones forms whatis called a switching zone as thesensor registers any person or

object crossing this boundary as afluctuation in radiation and emits asignal.

The segment lenses used are sim-ple Fresnel lenses or STEINEL'shigh-performance multi-lens.

Multi-sensor technology

increases the size of the detectionzone by means of two (illustrated)

or three identical pyro-sensorswithin the system.

11

L 262

L 562

Principle

Fresnel lenses

Fresnel lenses provide the simplestmeans of segmenting the detectionzone of an infrared detector. A sys-tem of individual lenses is arrangedhere in the form of an arc. With amaximum coverage angle of 180°,they can watch over an area of up to225 m2. A second optical windowbelow the main detection zonemakes it virtually impossible tocreep past underneath the sensorswithout being detected.

Reach

STEINEL sensors generally providea max. reach of 12 m that may beshorter when walking in a radialdirection (towards the sensor).

STEINEL multi-lens technology

Multi-lens technology (MLT) pro-vides uninterrupted coverage of asemi-spherical detection zone. Thismakes it the ideal lens system formotion detectors with double ortriple sensors.

Segment lenses

Multi-lenses

STEINEL sensors with multi-lens-es provide a coverage angle of180°, 240° or 360°.

180° / 2 sensors

approx. 5 m

radial movement tangential movement

12 m max.

360° / 3 sensors

Reach in relation to the direction of movement

240° / 2 sensors

Fresnel lenses

STEINEL sensors with Fresnellenses provide a coverage angleof 130°, 140° or 180°.

180° / 2 sensors130° / 1 sensor 140° / 1 sensor

12

L 265-5

Innovative and efficient

The mini-sensor's outstandingproperties are achieved by thespherical segmented mirrorand the state-of-the-artquadruple pyro-sensor.

Plug and save

The mini-sensor module plugs in andcan be removed for conveniently set-ting the light's functions.

Time setting

Twilightsetting

Programme selectorswitch

Mini-sensor:Elegant, efficient andintelligent

Developing the mini-sensor, STEINELhas adopted a whole new approachto creating PIR sensor systems. Aspherical segmented mirror guidesambient IR radiation onto a state-of-the-art and extremely efficient IRsensor chip. This configuration notonly makes it possible to keep thesystem extremely small, it also per-mits the reliable detection of move-ment in a full 360° circle.

The new operating concept

To permit rapid, intuitive adjustabili-ty of the sensor electronics to indi-vidual user needs, the entire sensormodule can be taken out of thelight, set in your own time, pluggedback in again and securely locked inplace.

While settings are being made, thelight switches itself 'ON' as soon asthe sensor is removed. This is prac-tical at twilight or during the night.All of the information you need toknow is printed in the sensor mod-ule itself, obviating the need for anyoperating instructions.

Mini-sensor

The function programmes

Standard programme (pre-set) for lightbulbs: Light soft start/soft end, nobasic brightness at dusk.

Comfort programme for light bulbs:Light soft start/soft end, 25% basic brightness at dusk.

Comfort economy programme for lightbulbs: Light soft start/soft end, 25% basic brightness up to midnight(the middle of the night is determinedby the solar cycle measured).

Low-energy lamp programme:Light 'ON' in response to movement,light 'OFF' again after time set. No softstart, no basic brightness.

13

0– 50%

Soft

4 Std./h

2–2000 Lux

5 Sek.–15 Min.

Adjustment range

STEINEL sensors with a coverageangle of less than 180° are equippedwith lenses that can be tilted andturned for exact adjustment to thesituation at the point of installation.

Shrouds

All sensors come with shrouds that can be cut to size for limitingdetection zones (e.g. next to neighbouring property / roads).

Twilight setting

A control dial can be used for infi-nitely varying brightness thresholdfrom 2 lux (night) to 2000 lux (day).This prevents light from coming'ON' unnecessarily during the day.

Time setting

Adjustable to any period from 5 sec.to 15 min. to suit specific needs.After detecting movement, the lightstays 'ON' for the period selected.

Watt-o-matic (brightness control)

Provides the capability of adjustingbasic brightness from 0 – 50% ofSensorLight output. When move-ment is detected, the SensorLightswitches to full power. Shows theway from a distance and frightensoff uninvited guests.

Soft light start and soft end

Elegantly increases output from thelamp in the SensorLight to 100%power. That's kind on the eye andhelps to prolong lamp life!

Manual override

Many of STEINEL's SensorLightscan be set to stay 'ON' perma-nently for 4 hours by operating aswitch twice. Afterwards, the lightautomatically returns to sensormode.

Setting capabilities

Functions

14

Motion Detectors for Outdoors

15

Switches that can see

Steinel Infrared sensors respond to heat radiated from moving persons and use thisability, for example, to switch a light 'ON'and, after a selectable period of time, 'OFF'again.

� STEINEL infrared sensors also bring modern-day convenience to lights that are already installed.

� Generous reach and coverage angles of 130° to 360° for a whole range of applications.

� Sneak-by guard for complete surveillance.

� Reliable operation, even in adverse weather conditions.

� Twilight threshold and light 'ON' durationcan be set to meet individual needs.

� Easy installation, even on internal andexternal corners.

� Ideal too for indoor areas, such as corridors and basement rooms.

16

IS 130-2 IS 140-2

IS 180-2 IS NM 360

all r

ound

Designation IS 130-2 IS 140-2

Angle of coverage 130° 140°

Reach 12 m max. 14 m max.

For areas as large as 150 m2 239 m2

Designation IS 180-2 IS NM 360

Angle of coverage 180° 360°

Reach 12 m max. 8 m all round

For areas as large as 200 m2 240 m2

Page 18 Page 19

Page 22 Page 20/21

For walls


17

IS 360 D

IS 240

Designation IS 360 D

Angle of coverage: 360°

Reach 12 m max.

For areas as large as 350 m2

The Right Sensor for my Home

Designation IS 240

Angle of coverage: 240°

Reach 12 m max.

For areas as large as 230 m2

Page 24

Page 23

For ceilings

For house corners

50° 90°

Milieu

S.5 Flyer

IS 130-2

18

2m

2-12 m

IS 130-2

130° / 1 sensor 12 m max.

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class

660215 660314 660116

130 x 78 x 84 mm

600 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive,cos ϕ = 0.5, e.g. fluorescent lamp)600 W max. (electronic ballasts, capacitive,e.g. low-energy lamp, 6 each max.)

230 – 240 V/50 Hz

130° with sneak-by guard

50° horizontally, 90° vertically

12 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 54

II

black white silver

Perfect detection with sneak-byguard

Detection zone Detectionangle


approx.150 m2

Main features at a glance

Facelift for the top-selling sensor.Infrared sensor, ideal for watching over areasin front of the home and in driveways.

The IS 130-2 is the attractively priced gateway to theworld of motion-activated switching that offers triedand proven technology for outstanding detection quality in a new design. It reliably watches over areasof up to 150 m2.

Setting options

� The tilting and swivelling multi-lens permits exact adjustment of the detection zone to suit individual requirements.

� Simple adjustment of light 'ON' time and twilightthreshold by control dial.

Installation advantages

� Clearly designed terminal compartment for fast, easy wiring.

90° vertically 50° horizontallyInfinitely variable adjustment of light 'ON' time and twilightthreshold

19

IS 140-2

2 m

2-14 m

IS 140-2

14 m max. 140° / 1 sensor

Infrared Sensors for Wall Mounting

The classic sensor – all new.

Offering even more horizontal and vertical adjust-ment angles, more reach and more detection precision, the IS 140-2 reliably watches over anyarea you want it to. Better than ever, its optical system with precision, spherical lenses detectspeople with even greater accuracy and provides a uniquely constant reach.

Setting options� Swivelling and tilting optical system for exact

adjustment of the detection zone.

� Simple adjustment of light 'ON' time and twilight threshold by control dial.

Installation advantages� Clearly designed terminal compartment for fast,

easy wiring.

� Corner wall mount available (outside corners).

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class

Optional accessories

EAN 4007841...

608811 608910

70 x 86 x 95 mm

1000 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5,e.g. fluorescent lamp)600 W max. (electronic ballasts, capacitive,e.g. low-energy lamp, 6 each max.)

230 – 240 V/50 Hz



14 m max. (temperature-stabilised)

2 – 2000 lux

8 sec. – 35 min.

IP 54

II

Corner wall mount 07 for installation on external corners 631864 black 631765 white

black white

Detection zone Perfect detection with sneak-byguard


Detectionangle

90° vertically 180° horizontally Detecting move-ment along out-side walls

Function setting

approx. 239 m2

2020


21

IS NM 360

1

2

3

4

ca.2 h Sensor

Sensor

P

P

P

P1/2 Sensor

Sensorca.2 h ca.2 h

IS NM 360


Outstanding functionality in a unique, new design.There's no better way to describe this visually dis-creet yet inspiringly different sensor. Its concealedcontrols permit an almost new kind of functionalflexibility. There are 4 sensor and NightMatic com-binations to chose from for controlling light just asyou please.

Setting options� Detection zone of motion detector can be

limited using the shrouds provided.

� Easy, convenient selection of light 'ON' time,twilight threshold and programmes on remov-able sensor module.

� 4 function programmes geared to practicalrequirements.

Intelligence and aestheticsperfectly combined

Infrared Designer Sensor for Wall Mounting

EAN 4007841...

Dimensions (HxWxD)

External switching capacity

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

IP rating

Safety class

black white

Angle of cover-age: 360°

1. Sensor mode only

2. Approx. 2 hours of constant light in the evening –light only comes 'ON' after then in response tomovement

3. Approx. 2 hours of constant light in the evening and morning, with light only coming 'ON' betweenthen in response to movement

4. Constant light up to midnight – light only comes'ON' after then in response to movement

Perfect coveragewith sneak-byguard

Coverage anglereduction

Setting functions Manual override2 x OFF/ON

609214 609313

114 x 100 x 58 mm

1000 W max. (resistive load, e.g. filament bulb) 500 W max. (uncorrected, inductive, cos ϕ = 0.5, e.g. fluorescent lamp) 600 W max. (electronic ballasts, capacitive, e.g. low-energy lamp, 8 each max.)

230 – 240 V/50 Hz


8 m all round (mounted at a height of 1.75 – 2 m)

2 – 2000 lux

5 sec. – 15 min.

selectable 4 h

IP 54

II

IS 180-2

2m

5m

12m

IS 180-2

22

2SensorenSystem

12m max.12m max.

Multi-lens technology for perfectdetection

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

Accessories

603113 603212 603618

120 x 76 x 56 mm

1000 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5, e.g. fluorescent lamp)600 W max. (electronic ballasts, capacitive, e.g. low-energy lamp, 8 each max.)

230 – 240 V/50 Hz

180° with 90° angle of aperture

2 basic settings: 12 m or 5 m max.

2 – 2000 lux

10 sec. – 15 min.

IP 54

II

Including corner wall mount for mounting on external and internal corners

black white stainless steel effect

2 basic reach settings possible

Detection zone Setting functionsReducing cover-age angle

180° / 2 sensorsapprox. 200 m2/40 m2

Arranged in segments, the sensor lens is visiblydivided into two detectionzones. Two basic reachsettings of 12 m or 5 mmax. can be preselectedsimply by turning themulti-lens.

Infrared wall sensor in slimline stylish design,ideal for watching over the fronts of largehomes.

The IS 180-2 combines modern, sleek design withstate-of-the-art sensor technology. Two highly sensitive infrared detectors positioned at a specificangle to each other to provide reliable, uninter-rupted coverage of areas as large as 200 m2.

Setting options

� Reach can be set to a maximum of 12 m or 5 m by turning the multi-lens.

� Detection zone can be limited by fitting the shrouds supplied.





2SensorenSystem

23

IS 240 DUO

2m

IS 240 DUO

230m2 12 m max.12m max.

Motion Detectors for Wall Mounting

Infrared wall sensor, ideal for watchingover large areas as well as external corners.

The IS 240 DUO is equipped with two highlysensitive infrared detectors positioned at aspecific angle to each other and reliablywatches over every inch of areas as large as230 m2. Mounted on external corners, itwatches over two house walls, saving theneed for a second sensor.

Setting options

� Detection zone can be limited by fittingthe shrouds supplied.

� Simple adjustment of light 'ON' time andtwilight threshold by control dial.



Detection zone Coverage angle Multi-lens technology for perfectdetection

Setting functions

240° / 2 sensors


EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class


EAN 4007841...

602710 602819

90 x 60 x 100 mm


230 – 240 V/50 Hz


± 80° precision adjustment of sensor housing


2 – 2000 lux

10 sec. – 15 min.

IP 54

II

Corner wall mount 01 for installation on external corners630119 black 630218 white

black white

IS 240 DUO


IS 360 D TRIO

24

350m2

24

IS 360 D TRIO

12 m max. 12 m max.

3SensorsSystem

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class

602512 602611

100 x 120 x 120 mm


230 – 240 V/50 Hz


± 10° precision adjustment of lens


2 – 2000 lux

10 sec. – 15 min.

IP 54

II

Detection zone Coverage angle Multi-lens technology for perfectdetection

Setting functionsCoverage anglereduction


360° / 3 sensors

Infrared ceiling sensor, ideal for uninter-rupted, all-round detection under ceil-ings, porches, carports, overhangingroofs or balconies.

The IS 360 D TRIO is equipped with threehighly sensitive infrared detectors posi-tioned a specific angle to each other to pro-vide reliable, uninterrupted all-round protec-tion of areas as large as 350 m2 beneath it.

Setting options






black white

25

IS 1

120°

902m

90�

IS 1

Infrared Sensors for Wall and Ceiling Mounting

Costs less than most people think.

wall ceiling

Setting functions


Perfect detectionAngle of coverage120°

180° vertically ± 30° horizontally

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

white black600310 600419

50 x 80 x 120 mm

500 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5)500 W max. ( electronic ballasts, capacitive,e.g. low-energy lamp, 4 each max.)

230 – 240 V/50 Hz

120°

10 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 54

II

Reducing theangle of coverage

Perfected technology and upmarket design needn'tcost a fortune. The latest case in point: The IS 1provides outstanding value for money that morethan meets the challenges in this segment.

Setting options

� The tilting and swivelling sensor lens permitsexact adjustment of the detection zone to suitindividual requirements.

� Simple adjustment of light 'ON' time and twilightthreshold by control dial.


� Clearly designed terminal compartment for fast,easy wiring.

� Can be mounted to walls and ceilings.

� Tilts and turns.

10 m max.

26


27

IS LED 2in1

IS LED


Low energy consumption and long life

Infrared Sensor with LED Light

The world has never seen anything like this before.

The IS LED combines timeless, aesthetic designwith practical benefits. Just like any other motiondetector, for instance, it switches an external light'ON' and 'OFF' again. At the same time, though,the IS LED is also a house number illuminated byLEDs. This unique, practical and stylish combina-tion can be used for all sorts of applications.

This is how they work� Three LED function programmes geared to

practical needs:1. 'ON' at twilight threshold, all night 2. 'ON' at twilight threshold to the middle

of the night. 3. 'ON' when movement is detected

� When movement is detected, the light connected switches 'ON' and 'OFF' again independently of the programme.

� Manual override (4h) can be selected at a mains power switch connected to the light.

Setting options

� Detection zone of motion detector can be limited using the shrouds provided.

� Easy, convenient selection of light 'ON' time,twilight threshold and programmes on remov-able sensor module.

EAN 4007841...

Dimensions (HxWxD)

Output

LED output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

IP rating

Safety class

silver




Setting functions Manual override2 x OFF/ON


� Comes complete withself-adhesive numbersfor use as a housenumber light.

600112

155 x 155 x 65 mm

1000 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5, e.g. fluorescent lamp)600 W max. ( electronic ballasts, capacitive, e.g. low-energy lamp, 8 each max.)

approx. 1 W

230 – 240 V/50 Hz


8 m all round (mounted at a height of 1.75 – 2 m)

2 – 2000 lux

5 sec. – 15 min.

selectable

IP 54

II

28


29

Switched-on lighting technology

Photoelectric lighting controllers switch'ON' light in relation to ambient brightness.An integrated light sensor automaticallyswitches the connected light 'ON' at duskand 'OFF' again at dawn. This makes themthe ideal solution for any lighting system:

� Photosensor switches light 'ON' and'OFF' in relation to ambient brightness.

� Lights of any type are switched 'ON' and 'OFF' automatically.

� Can also be used for controlling commercial lighting systems or shopwindow illuminations.

� Also available as low-energy lamp with integrated photoelectric lightingcontroller.

� Ideal for permanently illuminated housenumbers.

Day = 'OFF' Night = 'ON' chosen night-time setting = 'OFF' (Vario night economy mode)

30

NightMatic 2000NightMatic NightMatic 3000 Vario

NightMatic 3000 Vario NightMatic 2000


EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Twilight setting

Night economy mode

Power consumption

IP rating

Safety class

550516 550615

99 x 74 x 37 mm

1000 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5, e.g. fluorescent lamps)

230 – 240 V/50 Hz

approx. 0.5 – 10 lux / at press of button

variable night 'OFF' time

< 0.8 W

IP 54

II

550318 550417

99 x 74 x 37 mm

1000 W max. (resistive load, e.g. filament bulb)500 W max. (uncorrected, inductive, cos ϕ = 0.5, e.g. fluorescent lamps)

230 – 240 V/50 Hz

approx. 2 - 10 lux

–

< 0.8 W

IP 54

II

black white black white

Ideal for controlling lighting systemsused for illuminating building fronts,premises, shop windows or otherareas.

This is how they work

� The NightMatic 2000 registers ambi-ent brightness, automatically switch-ing 'ON' connected lights when thetwilight threshold is reached at duskand 'OFF' again at daybreak.

�The microprocessor controlledNightMatic 3000 Vario even goes astep further. With its Vario night econo-my mode, it also helps to save elec-tricity. If you wish, it will automaticallyswitch a light 'OFF' during the nightafter a programmable period of timeand then back 'ON' again in the morn-ing at about 5 a.m. – if it's still dark.

Setting options NightMatic 3000 Vario

�Chosen response threshold easily selectedat the press of a button (2).

�A control dial (4) permits infinitely variableadjustment of how long you want connect-ed loads to switch 'OFF' automatically during the night (night economy mode).

(1) Light sensor

(2) Button for setting chosen twilight threshold

(3) LED

(4) Setting length ofnight economy mode

� Twilight setting approx. 0.5 – 10 lux.

� Variable night 'OFF' time (night economy mode) approx. 10 p.m. – 5 a.m.

� Compensates for its own light, i. e. operation is not impaired byanother light in the vicinity.

� Twilight setting approx. 2 – 10 lux.

31

LN 1

AN/ON

AUS/OFF

Night-AUTOMATIC

53 mm

LN 1

The LN 1 combines exceptional designwith a high level of functionality. An extremely slim-line profile makes it a real looker wherever it'sinstalled. Needless to say, the 11 W low-energylamp is included and provides perfect illuminationin the evening when light levels fall to the twilightsetting selected. The light then switches 'OFF'again automatically at dawn.

Setting options

� Easy adjustment of twilight threshold by control dial.



� Includes house numbers and low-energy lamp.

� Can be mounted horizontally or vertically, on wall or ceiling, indoors or outdoors.

648916

300 x 195 x 53 mm

11 W max./ 2G7 (bi-tube low-energy lamp),

230 – 240 V/50 Hz

5 – 200 lux

IP 54

II

IK 07

-20° C to 40° C

11 W/2G7

000981 warm white

001261 cold white

whiteEAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Twilight setting

IP rating

Safety class

Impact-resistance

Ambient temperature

Replacement lamp

EAN 4007841...

Main uses at a glance

� Twilight setting5 – 200 lux

IMPACT-RESISTANT MATERIAL

Low-energy Lamp with integrated Photoelectric Lighting Controller

32

LDR

SensorLight plus

Night-AUTOMATIC


The successor to the tried and provenSensorLight that has sold in its millions.Similar in shape to an ordinary light bulb,its 3 photometric measurement fieldsguarantee reliable operation in anyscrew-in position.Never before has itbeen easier to upgrade existing outdoorand indoor lights to sensor-monitoredlighting technology. Old bulb out,SensorLight plus in. That's all it takes tobenefit from a new feeling of securityoffering state-of-the-art energy-savingpotential.

The ideal and simple way of bringingsensor-controlled technology to existing lights. Simply screw into thelampholder (E 27) – done.

� Twilight setting2 – 2000 lux

� Either 11, 15 or 18 W

33

75 W

15 W

60 W

11 W

100 W

18 W

This is how it works

� An integrated photosensor registers ambientbrightness and automatically switches thelow-energy lamp 'ON' in the evening and'OFF' again at dawn.

� The automatic sensor switching systemsaves more energy and provides more convenience than conventional low-energylamps.

� Warm light, long life (15,000 hrs. on average).

� Suitable for indoor and outside use.

Setting options

� Chosen response threshold is easy to set.

� Easy to replace with E 27 base.

621810

145 x 58 x 58 mm

230 – 240 V

2 – 2000 lux

E 27

50/60 Hz

1 photos. with 3 photo-metric measurem. fields

15,000 hrs. on average

900

IP 30

II

621711

145 x 58 x 58 mm

230 – 240 V

2 – 2000 lux

E 27

50/60 Hz



600

IP 30

II

EAN 4007841...

Dimensions (HxWxD)

Voltage

Twilight setting

Lampholder

Frequency

Number of photosensors(Light dependent resistor)

Long life

Lumens

IP rating

Safety class

15 W white11 W white

Low-energy Lamp with integrated Photoelectric Lighting Controller

621919

153 x 58 x 58 mm

230 – 240 V

2 – 2000 lux

E 27

50/60 Hz



1100

IP 30

II

18 W white

SensorLight plus

34


35

AluminiumQuality

TIP

GENUINE

CRYSTAL GLASS

hand blown

Light comes 'ON' – automatically

STEINEL SensorLights provide the easi-est way of bringing contemporary light-ing to your home and garden. Cutting-edge sensor technology automaticallyswitches light 'ON' at dusk as soon as a moving heat source is detected. When it stops detecting movement, itswitches the light 'OFF' again after aprogrammed time. And the best partabout it: they are as easy to install as a conventional light.

STEINEL SensorLights are available inmany different shapes and designs. Aswall, ceiling or free-standing lights. Fromclassic to modern, in stainless steel oraluminium or purely as function lights.

� Security, convenience and energysaving because light comes 'ON'automatically.

� 36-month functional guarantee.

� Glass shade availability guaranteedfor 5 years.

High-quality aluminiumenclosure for long life

Special dirt-repellentcoating for maximumcleaning convenience

Forward-pointing, no-maintenance LEDtechnology for maximumenergy efficiency

All Steinel lights are suitable foruse with low-energy lamps.

36

L 265-5

AluminiumQuality


These high-quality lights bring together thevery latest technologies in energy-efficientlighting in a highly attractive enclosure.

The STEINEL processor-controlled mini-sensorautomatically switches light 'ON' and 'OFF' inrelation to whether or not a person is present. The control system has also been optimisedspecifically for the use of low-energy lamps.An LED light corona in the base of the unit addsan attractive lighting feature. The L 265 S also features a 1-W power LED thatshines on the wall below the light when it's dark.This attractive light effect can also illuminate thehouse number, family name or other informationdisplayed there.These designer-style lights come with a high-quality die-cast aluminium enclosure finished in a dirt-repellent NANO Clean coating.

Energy-saving andLED technology in top-quality design

37

L 265 S

AluminiumQuality

860 Lumen14 Watt

12.000 h

Effect

1 W Power+

L 265-5 / L 265 SESL 14 W

L 265-5 L 265 S

Sensor Wall Lights with an LED Light Corona and Power LED Effect Light




Setting functions Manual override 2 x OFF/ON

622022 622015

48 mm dia. x 125 mm

230 – 240 V

E27

ON/OFF up to 50,000 times

EAN 4007841...

Dimensions

Voltage

Lampholder

Long life/ large numberof switching cycles

cool-white warm-white 6000K 2700K

Bulb

Tip!Low-energy lampspecifically forSTEINELSensorLights

Setting options� Detection zone 360° over a reach of

up to 8 m.

� Light threshold and 'ON' time adjustable to suit needs.

� 4 programmes geared to practical needs can be selected on the removable sensor module.

EAN 4007841...

Dimensions (HxWxD)

658311

320 x 223 x 260 mm

654313

295 x 72 x 105 mm

aluminium-silver aluminium-silver

Output

LED output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

IP rating

Safety class

Optional accessories EAN 4007841...

Low-energy lamp with a max. dia. of 48 mm / E 27

approx. 1 W

230 – 240 V/50 Hz

360° with sneak-by guard, adjustable

8 m all-round

2 – 2000 lux

5 sec. – 15 min.

selectable 4 h

IP 44

II

Adapter for surface wiring000448

38

L 270 S

AluminiumQuality

SensorLights,DesignSelection


SensorLight with LED back-lit glass panel.

Featuring a high-quality aluminiumbody and cutting-edge STEINEL mini-sensor technology, you can't help butbe impressed by the perfect marriageof design and function of the 270-Series.

The attractive highlight of the L 270 Sis the flat glass panel illuminated byLED's.

Matching the L 270 S house numberlight, wall light L 271 S gives a match-ing look to entrances and the front ofbuildings.

39

L 271 S

Serie 270

AluminiumQuality

L 270 S L 271 S

House Number SensorLights


� LED back-lit house number at dusk,night and dawn (L 270 S).

� Extremely long LED life

� Low energy consumption by LED's

� These SensorLights are provided withtwo G9 halogen bulbs for even glassshade illumination.

� Four function programmes geared topractical needs with soft light start aswell as 25% basic brightness (Watt-o-matic) leave you wanting for nothing.

� Manual override (4h) at power switch.

Setting options

� Detection zone can be limited by fittingthe shrouds supplied

� Easy, convenient selection of light 'ON'time, twilight threshold and programmeon removable sensor module.

EAN 4007841...

Dimensions (HxWxD)

647810

270 x 328 x 141 mm

647919

270 x 100 x 141 mm

aluminium aluminium

Output / light bulb

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating

Safety class

2 x 40 W max. / G9 LED, back-lit glass panel, approx. 1 W

230 – 240 V/50 Hz


8 m all-round

2 – 2000 lux

5 sec. – 15 min.

0 % or 25 % (Watt-o-matic)

selectable 4 h

IP 44

I


� Illuminated panel can be fitted on theleft or right depending on whetherthe light is installed to the left or tothe right of the front door (L 270 S).

� Complete with self-adhesive numbers (L 270 S).




Setting functions


Soft light start Manual override2 x OFF/ON

40


Timelessly elegant, intelligent and interconnectable. Also the perfectchoice for energy- efficient multiple-light applications

Our L 330 S and L 331 S lights are clas-sic beauties presented in a new design.What's more, we have given these lightsour mini-sensor, the most modern con-trol system there is. If you wish, you canalso create synchronised groups oflights by using the sensor in one light tocontrol the others. This is done simplyby replacing the sensors with the covercap provided.

A version is available with glass-shadegrills for applications demanding a high-er degree of protection.


� Three programmes geared to practical needs1. Light permanently 'ON' all night (automatic night mode)2. Light permanently 'ON' until the middle of the night, then sensor mode3. Sensor mode

Setting options

� Detection zone can be limited asrequired using shrouds provided.

� Easy, convenient adjustment of light'ON' time, twilight threshold andprogramme selection on removablesensor module.

Well-rounded solution for modern buildings

41

L 330 S L 331 S

L 330 / L 331

L 330 S L 331 S

Sensor Wall Lights

EAN 4007841...

Dimensions (HxWxD)

670115 670214

275 x 255 x 110 mm

670313 670412

275 x 255 x 125 mm

white silver white silver




Setting functions


Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

IP rating

Safety class

60 W max. / E 27additional switching capacity at L’:300 W max. (resistive load, e.g. filament bulbs), as many as 5 lights operating in parallel

230 – 240 V/50 Hz


8 m all-round

2 – 2000 lux

5 sec. – 15 min.

selectable: all of half the night

IP 44

II

Removable sensors forcontrolling up to 5 lights

42

L 306 S


Timeless perfection

Modern design and trendsetting function-ality for the front of your home.

Modern materials and timeless elegance onthe outside, uncompromising sensor technolo-gy of the finest on the inside. These micro-processor-controlled lights come with anadjustable basic-brightness function that canbe set to provide constant dimmed lightingwhen it's dark. When approached, the sensorelectronics then automatically turn the light upto full output.

The L 309 S makes the perfect house numberlight. Supplied complete with a sheet of self-adhesive numbers, you can use it to stick thenumber of your house on. The basic-bright-ness function quickly helps visitors, couriersand taxi drivers to find the right address. Thestylish overall impression of these lights iscomplemented by the aluminium base andhand-blown matt-finish opal glass shade.

43

L 309 S

L 306 S / L 309 S

L 306 S L 309 S

incl.

EAN 4007841...

Dimensions (HxWxD)

655112

326 x 230 x 104 mm

658410

326 x 218 x 104 mm

aluminium effect aluminium effect


� Four function programmes geared topractical needs with soft light start aswell as 25% basic brightness (Watt-o-matic) leave you wanting for nothing.

� Manual override (4h) at power switch.

Setting options

� Detection zone can be limited asrequired using shrouds provided.

� Easy, convenient adjustment of light'ON' time, twilight threshold and pro-gramme selection on removable sensormodule.




Setting functions


Sensor Wall Lights


Output / lamp

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating

Safety class

100 W max. / E 27 (with programme for standard low-energy lamps)

230 – 240 V/50 Hz


8 m all-round

2 – 2000 lux

5 sec. – 15 min.


selectable 4 h

IP 44

I

44


45

L 262 S

AluminiumQuality

0– 50%

L 262 S

Detection zone

240° / 2 sensors

approx. 230 m2

Setting functions Reach reduction Coverage anglereduction


Basic brightness can be infinitely varied from 0 to 50 % (Watt-o-matic)

Sensor Wall Lights

Modern; yet timeless. In superb quality.

The accomplished composition of hand-blownopal glass shade and aluminium light arm cuts animpressive figure with a surface finish that leavesno margin of doubt. But that's not all: powder-coated aluminium with dirt-repelling nano-surfaceforms an envelope around the high-quality materi-al. Added to this is STEINEL's perfected sensortechnology to guarantee years of reliable opera-tion.

Setting options

� Detection zone can be limited by fitting theshrouds supplied.

� Light 'ON' time and twilight threshold are easyto set by dial under removable decorative ring.

EAN 4007841...

Dimensions (HxWxD)

Output / lamp

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating

Safety class

alum.-silver alum.-anthracite646417 646516

300 x 200 x 200 mm

100 W max. / E 27

230 – 240 V/50 Hz

240°, 180° aperture angle


2 – 2000 lux

15 sec. – 15 min.

0 – 50 % (Watt-o-matic)

selectable 4 h

IP 44

II

Main features of the L 262 S:

46

L 11

AluminiumQuality


Convenience, safety, peace of mind andenergy efficiency in German qualityneedn't be expensive: Sensationallypriced, these SensorLights feature high-quality aluminium fascias, moderndesign and sensor technology that'sbeen tried and tested in millions of appli-cations.

They come with a detection angle of 180°and max. reach of 10 m. The sensor's gen-erous tilting range (90°) and the ability toclose off individual segments permit opti-mum adjustment of the detection range tothe given situation. The tough polycarbon-ate diffuser evenly disperses the light.

Compact, modernwall lights

47

L 12

180° max. 10 m

2m

L 11 / L 12

AluminiumQuality

L 11 L 12

Setting options

� The tilting sensor lens permits exactadjustment of the detection zone to suit individual requirements.



� Clearly designed terminal compartmentfor fast, easy wiring.

Sensor Wall Lights

Setting functionsPerfect detectionAngle of cover-age: 180°

90° vertically Reducing theangle of coverage

EAN 4007841...

Dimensions (HxWxD)

657710

280 x 214 x 114 mm

657918

279 x 155 x 120 mm

aluminium aluminium

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

60 W max./ E 27

230 – 240 V/50 Hz

180°

10 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 44

II


48

Stainless steel edition


The sensor wall lights from the stain-less steel edition combine modern,sleek design with cutting-edge sen-sor technology for maximum conven-ience, security and economy. Ideal forhome and garden.

Featuring trim panels in high-qualitystainless steel and hand-blown opalglass shades for soft light distribution,they are sure to provide effective lightingoutside your home. Select one of theattractive design options to suit yourparticular style of living. There are threehand-blown glass shades and five dif-ferently designed stainless steel trimpanels to choose from.

The innovative microprocessor controlsystem provides superb operating con-venience and functions that leave youwanting for nothing.

Setting options



� Comfort function buttons for accu-rately setting light 'ON' duration andtwilight threshold as well as for con-trolling brightness.


� Screwless shade attachment by means of eccentric fitting.

� No tools required for changing bulb.

� Easy to install.

� Electronic overload protection.

49

L 860 S L 867 S

12m5m

12m

Serie 860

L 876 S

L 867 SL 860 S L 876 S

STAINL.STEEL

Main features of the 860-Series at a glance

EAN 4007841...

Dimensions (HxWxD)

642518

330 x 208 x 107 mm

642112

330 x 222 x 105 mm

2 basic reach set-tings possible

Detection zone Turning multi-lens Coverage anglereduction

Reach reduction

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating

Safety class

100 W max./ E 27

230 – 240 V/50 Hz


2 basic settings: 12 m max. or 5 m (temperature-stabilised)

2 – 2000 lux

5 sec. – 15 min.


selectable 4 h

IP 44

II

Comfort functionbuttons

180° / 2 sensors12 m max.

stainless steel trim panelstainless steel trim panel

� With stainless-steel trim panel

� Hand-blown Triopalglass shade


� Hand-blown Triopalglass shade

647513

330 x 141 x 161 mm

stainless steel trim panel


� Hand-blown, matt opalglass shade


approx. 200 m2/40 m2

50

L 170 S / L 190 S

L 170 S

L 170 S

Classic SensorLights

EAN 4007841...

Dimensions (HxWxD)

IP rating

645311

340 x 220 x 150 mm

IP 43

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

Safety class

100 W max. / E 27

230 – 240 V/50 Hz


12 m max. or 5 m (temperature-stabilised)

2 – 2000 lux

5 sec. – 15 min.


selectable 4 h

II


� High-quality stainlesssteel

stainless steel

STAINL.STEEL

Exclusive SensorLights in classiclantern design for prestigious exteriors.

High-quality stainless steel (L 170 S) or long-life, intricately ornamented die-cast aluminium (L 190 S-series) combined with uncompromisingSTEINEL multi-sensor technology.


� Integrated soft light start.

� Basic brightness can be adjustedfrom 0– 50% (Watt-o-matic). Whenmovement is detected, the lightswitches to full power for the timeselected.

� Manual override (4h) at powerswitch.

Setting options



� Comfort function buttons for accurately setting light 'ON' duration, twilight threshold as well as for controlling brightness.

51

5m

12m 12m

L 190 S

AluminiumQuality

L 190 S


EAN 4007841...

Dimensions (HxWxD)

IP rating

644413 644512

335 x 217 x 147 mm

IP 44

Sensor Wall Lights

Detection zone2 basic reach set-tings possible


� Long-life, intricatelyornamented die-castaluminium

black white

Turning multi-lens Coverage anglereduction

Reach reduction


Comfort functionbuttons

approx. 200 m2/40 m2

GL 60 S

GL 60 S

52

647018

1038 x 102 dia. (glass shade)220 mm dia. (foot)

3 x 40 W max. / G9 includedor 100 W max. / E 27

included for3 x 40 W / G9(without lamp)

230-240 V/50 Hz


12 m max. (temp.-stabilised)

2 – 2000 lux

5 sec. – 15 min.

selectable 4 h


IP 44

II

Exquisite lights in a modern, sleek look,made of stainless steel and hand-blownopal glass to give bright, even illumina-tion. Ideal as wall, free-standing or bollardlights for gardens, drives or pathways.

The integrated soft-start feature is kind onthe eyes and prolongs the life of the bulbs byslowly increasing brightness to full outputover a period of one second. The electronicsare equally as gentle on the light when it isswitched 'OFF'. The built-in infrared sensortechnology is economical and easy to use.Manual override at power switch allows youto set the light to stay 'ON' for up to fourhours.

Setting options



Watt-o-matic (GL 60 S only)

Capability of setting a basic brightness of0 – 50%. The light switches to full bright-ness as soon as someone enters thedetection zone.

stainless steel

Detection zone

360° / 3 sensors

approx. 450 m2

Main features of the GL 60 S:

Setting functions Reach reduction



SensorLights in stainless steel

EAN 4007841...

Dimensions (H x Ø):

Output

Lamp adapter

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

Brightness control

IP rating

Safety class


STAINL.STEEL


� GL 60 S models comewith a two-part foot.The lower part is easilyremoved or shortenedfor use as a bollardlight.

53

L 260 S

L 260 S

SensorLights for Gardens and Walls

647315

426 x dia. 102 x 177 mm

2 x 40 W max./ G9or 100 W max./ E 27

included for2 x 40 W / G9(without lamp)

230 – 240 V/50 Hz



2 – 2000 lux

5 sec. – 15 min.

selectable 4 h

IP 44

I

Detection zone

240° / 2 sensors

approx. 230 m2

stainless steel

Main features of the L 260 S:

Setting functions Reach reduction



STAINL.STEEL

The G9 adapter modules,exclusively from STEINEL!

In order to achieve a long, evenlyilluminated glass shade, theseSensorLights are supplied withthe innovative G9 modules.

EAN 4007841...

Dimensions (HxWxD)

Output

Lamp adapter

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

IP rating

Safety class

54


55

GL 16 S

GL 16 S

AluminiumQuality

SensorLights for the Garden

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

Brightness control

IP rating

Safety class

� Three-switch function onthe light: Manual override /'OFF' / sensor mode

� Hand-blown, bubble-effectcrystal glass

617011 617110

1000 x 260 x 260 mm

100 W max. / E 27

230 – 240 V/50 Hz


35°

12 m max.

2 – 2000 lux

10 sec. – 15 min.

–

IP 44

II

Swivel adjustment Coverage anglereduction

Setting functionsDetection zone

180° / 2 sensors

approx. 225 m2

12 m max.

GL 16 S

black white


� The height of the lamp can be reduced by shortening the aluminium tube.

� Can also be used on top of walls with the tube shortened to 10 cm.

Period-style SensorLights in die-castaluminium. Ideal as free-standing or bollard lights for gardens, drives or pathways.

Their stylish, elegant design is just as remi-niscent of the good old days as the hand-blown crystal shade and use of high-qualitymaterial: This light is crafted from highlyresistant, coated die-cast aluminium. Theelectronics are anything but old-fashioned.

Setting options

� The detection zone can be adjustedexactly to protection requirements at the site of installation by means of tilting, turning lenses and can also limited usingthe shrouds provided.

� Exact time and twilight setting optionsby means of control dial.

SensorLight in traditional design

56

AluminiumQuality


Diversity in timeless design

The lights from the 706-Series com-bine attractive, timeless design – from classic to modern – with the latest,groundbreaking sensor technologyfrom STEINEL.

The high-quality, die-cast aluminium lightarm conceals STEINEL's new, high-per-formance mini-sensor! Hardly visible, thesensor is perfectly integrated in thedesign of the light.

Boasting a 4-segment sensor systemand mirror optics for a long focal length,the sensor provides unprecedentedlyeven, high-resolution 360° all-round coverage in a radius of 8 m.

57

L 726 S

L 726 S

L 746 S

L 746 S

L 706 S

L 706 S

Time setting

Programmeselector switch

Twilightsetting

653613 653712

285 x 191 x 276 mm

black white

� Hand-blown opal glassshade, polished finish

EAN 4007841...

Dimensions (HxWxD)

654214 654115

285 x 182 x 272 mm

black white

� Hand-blown, bubble-effect crystal glass shade




Setting functions



Output / lamp

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating / Safety class


100 W max. / E 27 (L 726 S 75 W max.)(with programme for standard low-energy lamps)

230 – 240 V/50 Hz


8 m all-round

2 – 2000 lux

5 sec. – 15 min.


selectable 4 h

IP 44 / I

Corner wall mount 631666 black, 631567 white

706-Series

653217 653316

285 x 210 x 285 mm

black white



� Four function programmes geared to practical needs with soft lightstart as well as 25% basic bright-ness (Watt-o-matic) leave you wanting for nothing.

� Manual override (4h) at powerswitch.

Classic Sensor Wall Lights

58


59

L 15

180°

2m

90

L 15


EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

black white617813 617912

410 x 190 x 240 mm

60 W max./ E 27

230 – 240 V/50 Hz

180°

10 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 44

II

Setting functions


Perfect detection

10 m max.


90° vertically Reducing theangle of coverage

A spot of old-fashioned elegance at anastounding price. The new L 15 now givesanyone with a preference for a classic lookthe opportunity to benefit from cutting-edge sensor technology for very littlemoney.

The traditional design and quality of this intelligent light is underscored by the hint of bevelled glass. The light is equipped with thebrand leader's sensor technology that's beentried and tested in millions of applications.They come with a detection angle of 180° andmax. reach of 10 m. The sensor's generoustilting range (90°) and the ability to close offindividual segments permit good adjustabilityof the detection range to the given situation.

Classic in Design and Quality

60

Sensor wall lights of unadorned, classicdesign with tried and proven technologyfor home and garden.

Each of these lights is available either inblack or white. Hand-blown by craftsmen,the glass shades lend each of these lightstheir own particular identity. In addition tothe globe option, there's also the classiclantern style to choose from.

Setting options

� The detection zone can be adjustedexactly to protection requirements at thesite of installation by means of tilting,turning Fresnel lens and can also limitedusing the shrouds provided.

� Easy adjustment of light 'ON' durationand twilight threshold by control dial.

560-Series


61

L 560 S L 562 S

L 560 S L 562 S

Detection zone Reducing coverage angle Setting functions

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Angle of coverage

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class

634216 634315

368 x 215 x 243 mm

60 W max./ E 27

230 – 240 V/50 Hz

140° horizontallywith sneak-by guard


12 m max.

2 – 2000 lux

10 sec. – 15 min.

IP 44

II

634612 634711

410 x 200 x 260 mm

60 W max./ E 27

230 – 240 V/50 Hz

140° horizontallywith sneak-by guard


12 m max.

2 – 2000 lux

10 sec. – 15 min.

IP 44

II

140° / 1 sensor

approx. 150 m2



� Hand-blown and hand-painted glass shade

� Hand-blown, bubble-effect crystal glass

6262


6363

L 115 S

0– 50%

L 115 S

The design element that gives this SensorLightits unique look is the interesting effect of thecrystal clear glass shade. The multi lens visibleat the base blends harmoniously into the designand is the external mark of a highly sensitiveinterior.

Setting options� Watt-o-matic allows basic brightness to be

adjusted from 0 to 50%. When movement isdetected, the light switches from the courtesymode of basic brightness to full output.

� The use of shrouds permit exact adjustment to the specific situation.


All-round perfection:Simple elegance withclever, practical functions.


EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

IP rating

Safety class

white silver


657413 657512

330 x 215 x 257 mm

60 W max./ E 27

230 – 240 V/50 Hz


12 m max.

2 – 2000 lux

5 sec. – 15 min.


IP 44

II

Setting functions Adjustment usingshrouds

Basic brightness can be infinitely varied from 0 to 50 % (Watt-o-matic)

Twilight setting Time settingDetection zone

360° / 1 sensor

approx. 150 m2

12 m max.

� Hand-blown crystalglass shade

64

N E U

L 535 S

L 535 S Best Price

L 535 S


Sensor wall light of unadorned, classicdesign with tried and proven technologyfor home and garden.

Harmoniously integrated in the design, a lensprovides a maximum coverage angle of180°. Hand-blown by craftsmen, the glassshades lend each of these lights their ownparticular identity.

Setting options

� The tilting sensor lens permits exactadjustment of the detection zone to suitindividual requirements.



� Clearly designed terminal compartmentfor fast, easy wiring.

Detection zone Reducing coverage angle

180° / 1 sensor

approx. 200 m2

12 m max.

644017 644116

307 x 215 x 228 mm

100 W max. / E 27

230 – 240 V/50 Hz

180°with sneak-by protection

70° vertical

12 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 44

II

black white

Setting functions

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Angle of coverage

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class

� Attractively priced entry-level model


10

65

L 1

180°

2m

L 1


� Attractively priced entry-level model

� Impact-resistant plastic cover

The quality and experience of the market leader ina simple but stylish SensorLight. This is the mark of an effective way to watch overareas as large as 105 m2. The practical part aboutit: In its lowermost position, the sensor can beused for detecting movement along the wall of abuilding.

Setting options

� The tilting sensor lens permits exact adjust-ment of the detection zone to suit individualrequirements.




� Complete with self adhesive numbers for use as illuminated house number.

Simply stylish and practical in many ways.

Setting functionsPerfect detection

10 m max.


90° vertically

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

Impact-resistance

Accessories

white black650513 650612

255 x 110 x 120 mm

60 W max. / E 27

230 – 240 V/50 Hz

180°

10 m max.

2 – 2000 lux

8 sec. – 35 min.

IP 44

II

IK 7

Including sheet of self-adhesive house numbers


Reducing theangle of coverage


66


High-quality ceiling SensorLight fea-turing state-of-the-art multi-lenstechnology from STEINEL for all-round coverage of areas under porch-es, overhanging roofs, wall projec-tions, garages or carports.

Featuring a housing base in high-quality,long-life die-cast aluminium and hand-blown opal glass shades or impact-resistant acrylic glass shades, the DL750 S provides soft light distribution andenergy-saving illumination.


� Basic brightness can be adjustedfrom 0– 50% (Watt-o-matic). Whenmovement is detected, the lightswitches to full power for the timeselected.

� The integrated soft light start featurecreates a pleasant lighting effect andprolongs the life of the bulb by grad-ually increasing brightness to full out-put over a period of one secondwhen the light is switched 'ON'. Theelectronics are equally as gentle onthe light when it is switched 'OFF'.

Setting options

� Detection zone can be limited by fitting the shrouds supplied

� Control dials for easy adjustment oflight 'ON' time, twilight threshold andbrightness.


� Bulb can be changed without toolsthanks to glass shade with bayonetfitting.

Light from the top... automatically

67

DL 750 S DL 750 S

DL 750 S DL 750 S

DL 750 S


Ceiling SensorLights

EAN4007841... 650315

Twilight settingDetection zone Time setting Brightness control (Watt-o-matic)

Shrouds forreducing reach

…as well as thedetection zone

650414

360° / 3 sensors

approx. 350 m2

12 m max.

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Brightness control

Manual override

IP rating

Safety class

135 x 315 x 315 mm

100 W max. / E 27

230 – 240 V/50 Hz


12 m max. all round (temperature-stabilised)

2 – 2000 lux

5 sec. – 15 min.


selectable 4 h

IP 44

I

white/opal glass shade white/acrylic glass shade

� Unbreakable acrylic glass shade� Hand-blown opal glass shade



GLASS

68


69

DL 850 S

DL 850 S

2 x 9 W

7 m max.

Ceiling SensorLight


Straightforwardinstallation

Detection zone Twilight setting Time setting

360° / 3 sensors

approx. 154 m2

white/plastic silver/plasticEAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

IP rating

Safety class

Impact-resistance

760113 760212

258 mm dia. x 74 mm

includes 2 x 9 W / 2G7 (low-energy lamps)

230 – 240 V/50 Hz

360°, 160° aperture angle

7 m max. all around (temperature-stabilised)

2 – 2000 lux

1 min. – 15 min.

IP 44

II

IK 07


Maximum energy efficiency under porches

Light is required on a particularly frequentbasis at entrances to apartment buildings.This is where combining sensor technologyand low-energy lamps provides particularlyhigh savings.

The DL 850 S makes the perfect choice forbuildings where the entrance light is installedunder a canopy roof. The attractively styledceiling SensorLight is equipped with two 9-watt low-energy lamps. The ballast ensuresthe light comes 'ON' quickly and helps toprolong lamp life.

Efficiency highlight

70

XLed Home 114,8 W

Halogen150 W


Lighting sensation: The LED powerhouse

STEINEL brings tomorrow's technolo-gy to your home today. The XLedHome floodlight with its 170 LEDsensures perfect illumination with asensationally low energy requirement.

The new hi-tech floodlight requires lessthan 15 watts to immerse its surround-ings in dazzling light. Its incredibly highlevel of efficiency is made possible byusing 170 LEDs for light and an innova-tive control system. These modern com-ponents come with a further major advantage: compared with halogen orfilament bulbs, their life is virtually unlimited. Their life span is enhanced bySTEINEL's Active-Thermo-Control technology that protects the LEDs fromoverheating.

As the floodlight emits only a fraction of the heat conventional floodlight do, it can be installed without a problemunder porches. Adjusting in all direc-tions, the light panel can be aimed per-fectly at the area you wish to illuminate.

Intelligent lighting control is provided bySTEINEL's IR-Sensor technology thathas been tried and proven in millions ofapplications and also featured in the IS140-2 motion detector. The combinationof LED technology and sensor controlproduces a saving of 90% over conven-tional halogen floodlights.

71

Infrarot-Sensoren für den Außenbereich

XLed Home 1

XLed Home 1

2 m

2-14 m

90°270°

Sensor-Switched LED Floodlights

EAN 4007841...

Dimensions (HxWxD)

Output

Light colour

Voltage

Floodlight posit. range

Detection angle

Sensor positioning range

Detection reach

Twilight setting

Time setting

IP rating

Safety class

white silver002695 002688

210 x 175 x 180 mm

170 LEDs, approx. 14.8 WLifespan of LEDs: up to 50.000 hrs.

6700 Kelvin

230 – 240 V/50 Hz





2 – 2000 lux

8 sec. – 35 min.

IP 44

I

Perfect detection with sneak-byguard

140° / 1 sensor 14 m max.


Detectionangle

90° vertically 180° horizontally Detecting move-ment along out-side walls

Function setting

approx. 239 m2

� 14.8 W LED

� 90% energy saving

� Active Thermo-Control

Detection zone

72

Sensor-Switched Halogen Floodlights


STEINEL sensor-switched halogenfloodlights are the ideal solution whenit comes to illuminating the front ofbuildings, driveways and vulnerablespots with particularly bright light.

These vigilant floodlights are designedfor bulbs with output ratings of 150 to500 watts. This automatically picks outspecial features, welcomes guests andfrightens off unwanted visitors. Rangingfrom the low-price Fresnel lens light HS5140 to the microprocessor controlledhi-tech floodlight HS 500, the STEINELline-up offers just the right model forany application. Models HS 150 and HS 300 are equipped with a ceramicreflector.

Setting options

� The detection zone can be adjustedexactly to requirements at the site ofinstallation by means of the tilting,swivelling multi-lens (HS 150 DUO,HS 300 DUO, HS 500 DUO) orFresnel lens (HS 5140) and can belimited using the shrouds provided.

� Easy adjustment of light 'ON' dura-tion and twilight threshold by controldial.

73

HS 150/300/500

The halogen floodlight housing can betilted from +110° to -40° and swivelledthrough ±40°. This permits optimum illu-mination even in situations where instal-lation is awkward.


74

HS 150 DUO HS 300 DUO

300 m2

HS 150 DUO HS 300 DUO

HS 150 DUO / HS 300 DUO

incl. 240 Wincl. 125 W

� Attractive design

� High-quality, powerful ceramic reflector

� High-quality, powerful ceramic reflector

Detection zone Reducing coverage angle

Detach decorativering

Twilight, time setting

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class


EAN 4007841...

633011 633110 646318

215 x 155 x 170 mm

150 W max./R7s linear halogen lamp and an additional max. switching capacity of 800 W at L’125 W ECO linear lamp included.

230 – 240 V/50 Hz




2 – 2000 lux

10 sec. – 15 min.

IP 44

I

Corner wall mount 02 is available for installation on external corners630560 black 630669 white

633219 633318

240 x 210 x 180 mm

300 W max. / R7s linear halogen lamp240 W ECO linear lamp included

230 – 240 V/50 Hz




2 – 2000 lux

10 sec. – 15 min.

IP 44

I

–



black white platin. effect black white

CERAMICREFLECTOR

CERAMICREFLECTOR

2SensorSystem

75

HS 500 DUO HS 5140

HS 500 DUO HS 5140

HS 500 DUO HS 5140

800 m2 175 m2

20m

incl. 400 W incl. 400 W

Best Price

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Adjustment range

Reach

Twilight setting

Time setting

IP rating

Safety class


633417 633516

265 x 210 x 210 mm


230 – 240 V/50 Hz




2 – 2000 lux

10 sec. – 15 min.

IP 44

I

–

575212 577919

185 x 170 x 160 mm


230 – 240 V/50 Hz


180° vertically to front and rear


2 – 2000 lux

8 sec. – 35 min.

IP 54

I

–


Detach decorativering

� Long light and sensor reach of up to 20 m

� Attractively priced starter model


Reducing coverage angle

Twilight, time setting


Detection zone Function settings

140° / 1 sensor

2SensorSystem

Detection zone

7676


77

TIP

Welcome home

The future of lighting is automatic. Notonly outdoors where STEINEL's inventionis part of today's standard equipment forhome and garden. Developing state-of-the-art high-frequency sensors, STEINELhas made tomorrow's technology anattractive option for indoors too. As aresult, it is now possible to benefit frommaximum energy efficiency and optimumconvenience within the home as well – allpowered by STEINEL.

The innovation is concealed inside thelight. A high-frequency motion detectorthat switches light 'ON' to welcome youand your visitors on entering the roomand turns it 'OFF' again when it's nolonger needed. Welcome home. Welcometo the future.

� Response light level, light 'ON' timeand reach can be adjusted to suit individual requirements.

� Easy to install: Sensor and light = 1 connection

� Available as wall or ceiling lights in a choice of designs.

� 36-month functional guarantee.

� Glass shade availability guaranteed for 5 years

All Steinel lights are suitable foruse with low-energy lamps.

Intelligent Energy Saving

(2nd floor)

(1st floor)

(Ground floor)

78

Ø 1–8 m

Ø 1–8 m

1,75 m

2,50 m


Light 'ON' and 'OFF'… automatically

An innovation from STEINEL – the original.

STEINEL high-frequency (HF) sen-sors instantly identify movementswithout "sensitivity" being restrictedby ambient temperature and thedirection in which the object beingdetected is moving.

The hi-tech sensors emit signalsand receive the echo reflected offwalls and surrounding objects amoment later. Responding to thechanged echo image, the sensorregisters any movement in thedetection zone within fractions of asecond and immediately switchesthe light 'ON'! The light switches'OFF' automatically after a periodyou wish to select.

STEINEL high-frequency sensorsoperate at 5.8 GHz. As these sig-nals are not obstructed by glassand thin walls, the sensor can beinstalled inside the light where theyare hidden from view. This meansnothing spoils the design ofSTEINEL SensorLights.

At approx.1 mW, their power outputis about 1000 times less than that ofa mobile phone.

Detection zone

There's no way round HF-Sensor-Lights from STEINEL. They detecteven the tiniest movement any-where within a distance of up to 8 min a 360° circle. If required, reachcan be reduced electronically to anydistance as short as 1 m.

Elegant convenience

Intelligence is something you can't see but notice. Hidden out of viewon the inside, HF-technology from STEINEL switches the attractive light'ON' "just in time".

Watchful light

STEINEL's HF-SensorLights have a detection zone that's ideal for appli-cations indoors. Providing all-round, 360° coverage, they can beinstalled on walls or ceilings.

79

2–2000 Lux

Ø 1 – 8 m

5 sec. – 15 min.

Time setting

STEINEL HF-SensorLights areequipped with a timer that makessure the light stays 'ON' for theselected period of time. The timeyou want the light to stay 'ON' forcan be adjusted to any settingbetween 5 sec and 15 min.

Twilight setting

Setting the response threshold tobetween 2 and 2000 lux, you candetermine the level of ambientbrightness at which you want theSensorLight to come 'ON'. Whileit's still light, at dusk or when itgets dark.

Reach adjustment

STEINEL HF-SensorLights candetect movements within a radiusof 1 to 8 m. Reach is infinitely variable within this range.

Straightforward installation

STEINEL HF-SensorLights areinstalled just as quickly and easilyas conventional lights: Fix light towall or ceiling and connect phaseand neutral conductor to thescrew terminals – that's all there isto it. With the integrated sensorsystem, the only difference now isthat there's no switching 'ON' and'OFF' to do by hand any more.

Modernisation in seconds flat

STEINEL HF-SensorLights areinstalled in exactly the same way asconventional lights. They require noextra work and there are no addi-tional cables to connect either. Onthe contrary: There is no necessityfor complicated two-way doublepole reversing switches and thewiring runs they involve. Investing inthe future couldn't be easier or moreconvenient.

A matter of choice

STEINEL HF-SensorLights can beset exactly the way you want atthree infinitely adjustable controldials.

Connecting other loads

The HF-SensorLights are providedwith a separate terminal that canbe used for connecting other loads.On entering the guest toilet, forexample, an additional lamp orextractor fan then switches 'ON'together with the light. Maximumswitching capacity is 100 watts.

Principle

80

www.energieclevernutzen.de

Light comes 'ON' when someone'sthere. Wherever it's needed.


Light 'ON'. Light 'OFF'. Controlled by sensor.

81

FRS 30

FRS 20

RS 13 L

HF 360 AP

RS 10-1 LBRS 61 L

Applications

Bright rooms for bright individuals

Steinel has the right solution foradvanced lighting to suit any roomand any application. Here are a fewsuggestions of where to use whichproduct.

E.g. garage, boiler room, box-room...

FRS 30Page 89

E.g. corridors, storerooms…

E.g. guest's bathroom, closet…

FRS 20Page 88

E.g. entrances,stairwells…

RS 13 LPage 84

E. g. laundry rooms…

E.g. corridors in apartment buildings…

HF 360 APPage 95

RS 10-1 LPage 82

BRS 61 LPage 87

82

RS 100 L RS 16 LRS 10-1 L

RS 10-1 L

RS 16 L

RS 10-1 L / 100 L / 16 L

Best Price

Best Price


EAN 4007841...

Dimensions (HxWxD)

Output

Transmitter power

HF-system


Base

738013

275 mm dia. x 95 mm

60 W max./ E 27

approx. 1 mW

5.8 GHz

IP 44 / II

Plastic

730116

310 mm dia. x 125 mm

100 W max. / E 27+ 800 W max. / e.g. bathr./WC extr. fan

approx. 1 mW

5.8 GHz

IP 44 / II

Aluminium

white whitewhite

Twilight settingEasily mounted towalls or ceilings

Time setting Reach setting

Main features of SensorLights

731816


75 W max. / E 27+ 800 W max. / e.g. bathr./WC extr. fan

approx. 1 mW

5.8 GHz

IP 44 / II

Aluminium

Clean-cut design, ideal for corridors,halls or stairwells.

Whether as ceiling or wall light, elegant,hand-blown glass shades create a warm,even light.


� Invisibly concealed inside, cutting-edgehigh-frequency sensor technologyresponds to the slightest movement irrespective of temperature, instantlyswitching the light 'ON' and then 'OFF'again after a selectable time.

Setting options

� Infinitely variable, electronic reach settingfrom 1 – 8 metres in all directions.

� Easy adjustment of light 'ON' durationand twilight threshold by control dial.


� Straightforward installation (lamp and sensor = 1 connection)

� Facility for connecting additional loads(e.g. bathroom/WC extractor fan)

� Bulb can be changed without the needfor tools as screwless glass shade isheld in place by bayonet catch.

83

RS 16-2 L / RS 16-3 L

RS 16-2 L

RS 10-1 / 100 / 16 / 16-2 / 16-3 L

RS 16-2 L RS 16-3 L RS 16-3 L

RS 16-3 L

High-frequency SensorLights for Wall and Ceiling Mounting

EAN 4007841...

Dimensions (HxWxD)

Output

Transmitter power

HF-system


Base

Square, hand-blown, matt opal glass shade.Optionally with trims to suit any taste.

Anyone preferring a square shape will find the righthigh-frequency SensorLight among the modelsshown here. In exceptional designs and high-quality finish, theycan be used as wall or ceiling lights.

Particularly practical: Spring mechanism for aligningthe square glass shade with effortless ease.

Operation, setting options and installation advantages

� see p. 82

230-240 V/50 Hz

360° with 160° aperture angle also through glass, wood and stud walls

1 – 8 m dia., infinitely variable3 – 8 m dia. (RS 16/16-2/16-3 L)

2 – 2000 lux

5 sec. – 15 min.

Voltage

Angle of coverage

Reach

Twilight setting

Time setting

� High-quality finish

� White. hand-blownTriopal glass shade

� Base in high-quality die-castaluminium or high-quality plastic (RS 16/16-2/16-3 L)

738211

270 x 270 x 110 mm

60 W max. / E 27max. additional switching capacity 100 W / e.g. bathroom/WC extractor fan

approx. 1 mW

5.8 GHz

IP 44 / II

Plastic

738310 738419

295 x 295 x 110 mm

white white st.-steel effect

84

RS 13 L / RS 10-3 L

735715 731410

Ø 360 x 110 mm

max. 75 W / E 27 + max. 800 W / z.B. Bad-/WC-Lüfter

ca. 1 mW

5,8 GHz

IP 44

II

Aluminium

RS 10-3 L

RS 10-3 L

RS 13 L

EAN 4007841...

Abmessungen (Hx BxT)

Leistung

Sendeleistung

HF-Technik

Schutzart

Schutzklasse

Chassis

730819

Ø 340 x 110 mm

max. 75 W / E 27+ max. 800 W / z.B. Bad-/WC-Lüfter

ca. 1 mW

5,8 GHz

IP 44

II

Aluminium

RS 13 L


Stylish looks in a wide diameter, idealfor corridors, hallways or stairwells.

These lights cut a great figure whereverthey are installed – whether on the ceil-ing or on the wall. The hand-blown opalglass shades are surrounded with trimpanels in matt-finished crystal glass orcoloured plastic. Maximum bulb outputis 75 watts.


� see p. 82

735715 731410


75 W max. / E 27+ 800 W max. / e.g. bathroom/WC extractor fan

approx. 1 mW

5.8 GHz

IP 44

II

Aluminium

st.-steel effect whiteEAN 4007841...

Dimensions (HxWxD)

Output

Transmitter power

HF-system

IP rating

Safety class

Base

730819


75 W max. / E 27+ 800 W max. / e.g. bathr./WC extractor fan

approx. 1 mW

5.8 GHz

IP 44

II

Aluminium

white

� Hand-blown opal glass shade with matt-finished glass ring (RS 13 L)

� White, hand-blown Triopal glass shade with plastic trim panel (RS 10-3 L)

� Base in high-quality die-cast aluminium

85

230 – 240 V, 50 Hz

360° mit 160° Öffnungswinkel ggf. durch Glas, Holz und Leichtbauwände

Ø 1 – 8 m,stufenlos einstellbar

2 – 2000 Lux

5 sek. – 15 min.

Netzanschluss

Erfassungswinkel

Reichweite

Dämmerungs-einstellung

Zeiteinstellung

RS 13 / 10-3 / 21 L

731014

Ø 280 x 100 mm

max. 75 W / E 27+ max. 800 W / z.B. Bad-/WC-Lüfter

ca. 1 mW

5,8 GHz

IP 20

II

Aluminium

RS 21 L

Ø 1–8m

Ø 1–8m

1,75m

2,50m

RS 21 L

230 – 240 V/50 Hz


1 – 8 m dia., infinitely variable

2 – 2000 lux

5 sec. – 15 min.

Twilight settingStraightforwardinstallation

Time setting Reach setting

Voltage

Angle of coverage

Reach

Twilight setting

Time setting


731014


75 W max. / E 27+ 800 W max. / e.g. bathr./WC extractor fan

approx. 1 mW

5.8 GHz

IP 20

II

Aluminium

silver, opal matt glass shade

Main features of SensorLights

Exquisite design, ideal for rooms inliving areas.

Anyone with a preference for exception-al design is sure to find the right hi-techSensorLight for their home in this series.Three visible clips not only hold thewhite glass shades securely in place,they also add to the overall design.


� see p. 82

� Three retaining clips create a striking look

� Domed, matt opal glass shade

� Base in high-quality,silver-lacquered die-cast aluminium

Detection zones for wall and ceiling mounting

86

HF-SensorLights for Indoors

87

BRS 60 L / BRS 61 LBRS 65 L / BRS 66 L

EAN 4007841...

Abmessungen (HxBxT)

Leistung

Netzanschluss

Erfassungs winkel

Sendeleistung

HF-Technik

Reichweite

Dämmerungs einstellung

Zeiteinstellung

Schutzart

Schutzklasse

BRS 66 LBRS 61 LBRS 60 L

740115500 x 90 x 60 mm

3 x 40 W / G9

230 – 240 V, 50 Hz

360° mit 160° Öffnungswinkel ggf. durch Glas, Holz und Leichtbauwände

ca. 1 mW

5,80 GHz (reagiert temperaturunabhängig auf kleinste Bewegungen)

Ø 0,5 - 5 m, stufenlos einstellbar

2 – 2000 Lux

5 sek. – 15 min.

IP 44

I

740214500 x 90 x 60 mm

3 x 40 W / G9

BRS 65 L

740610350 x 90 x 60 mm

2 x 40 W / G9

740719350 x 90 x 60 mm

2 x 40 W / G9

360°

This range makes a stylish appearance in anybathroom, corridor and hallway. Sleek design,high-quality materials and trendsetting technology.Innovative HF-technology does its job out of sight,almost instantly and always most efficiently.

Setting options� Infinitely variable, electronic reach setting from

1 – 5 metres in all directions.

� Easy adjustment of light 'ON' duration and twilight threshold by control dial.

Exquisite wall and mirrorlights for bathrooms andhallways.


Detection zonewhen wall-mounted


Twilight setting

High-frequency SensorLights for Bathrooms, Stairwells, Hallways …

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Coverage angle

Transmitter power

HF-system

Reach

Twilight setting

Time setting

IP rating

Safety class

Opal gl. sh./white cap Opal gl. shade/chr. cap740115

500 x 90 x 60 mm

3 x 40 W / G9

230 – 240 V/50 Hz


approx. 1 mW

5.80 GHz (responds to the smallest of movements regardless of temperature)

0.5 – 5 m dia., infinitely variable

2 – 2000 lux

5 sec. – 15 min.

IP 44

I

740214

500 x 90 x 60 mm

3 x 40 W / G9

Time setting Minimum distances inbathrooms

BRS 65 L opal glass shade / white (plastic) cap

BRS 66 L opal glass shade / chrome cap

BRS 60 L opal glass shade / white (plastic) cap

BRS 61 L opal glass shade / chrome cap

BRS-Series

Opal gl. shade/chr. capOpal gl. sh./white cap

740610

350 x 90 x 60 mm

2 x 40 W / G9

740719

350 x 90 x 60 mm

2 x 40 W / G9

88

FRS 20

743512300 x 195 x 63 mm

2 x 11 W / 2G7 (2-röhriges Energiesparleuchtmittel)zusätzl. Schaltleistung max. 200 W / z. B. Bad-/WC-Lüfter

230 – 240 V, 50 Hz

360° mit 160° Öffnungswinkelggf. durch Glas, Holz und Leichtbauwände

ca. 1 mW

5,8 GHz

Ø 1 – 5 m, stufenlos einstellbar

2 – 2000 Lux

1 min. – 15 min.

IP 54

II

IK 07

FRS 20

EAN 4007841...

Abmessungen (HxBxT)

Leistung

Netzanschluss

Erfassungs winkel

Sendeleistung

HF-Technik

Reichweite


Zeiteinstellung

Schutzart

Schutzklasse

Schlagfestigkeit

63 mm

1 m

2,50 m5 m 1 m

1,75 m

5 m

360°


743512

300 x 195 x 63 mm

2 x 11 W max./ 2G7 (bi-tube low-energy lamp), additionalswitch. capac. 200 W max. / e.g. bathr. / WC extractor fan

230 – 240 V/50 Hz


approx. 1 mW

5.8 GHz


2 – 2000 lux

1 min. – 15 min.

IP 54

II

IK 07

white

FRS 20

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Angle of coverage

Transmitter power

HF-system

Reach

Twilight setting

Time setting

IP rating

Safety class

Impact-resistance

Energy-saving marvels formany different places.The FRS 20 light combines sensor technology,low-energy light source and ultra slimline design.The result: a clever all-round-energy-saving light for a wide range of applications.

Setting options� Infinitely variable, electronic reach setting

from 1 – 5 metres in all directions.


Operational reliability� Bulbs work independently of each other

(so light stays 'ON' even if one of the bulbs is faulty).




Detection zonewhen ceiling-mounted

Detection zonewhen wall-mounted

Twilight setting Time setting

89

FRS 30

EAN 4007841...

Abmessungen (HxBxT)

Leistung

Netzanschluss

Erfassungs winkel

Sendeleistung

HF-Technik

Reichweite


Zeiteinstellung

Schutzart

Schutzklasse

Schlagfestigkeit

FRS 30

743413165 x 658 x 110 mm

2 x 18 W / G13, zusätzliche Schaltleistung max. 200 W / z. B. Bad-/WC-Lüfter

230 – 240 V, 50 Hz

360° mit 160° Öffnungswinkelggf. durch Glas, Holz und Leichtbauwände

ca. 1 mW

5,8 GHz

Ø 1 – 8 m, stufenlos einstellbar

2 – 2000 Lux

1 min. – 15 min.

IP 65

II

IK 07

18 W/G13

1 m

2,50 m

8 m

360°

Detection zonewhen ceiling-mounted


Practical ceiling-mountedsolution for basements,boiler rooms and garages.

For the first time, the FRS 30 light provides triedand tested sensor technology from STEINEL in afurther practical form of light. The electronicsinstantly turn the light 'ON' without frequency ofoperation affecting service life.

Setting options� Infinitely variable reach setting from

1 – 8 metres in all directions.


EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Angle of coverage

Transmitter power

HF-system

Reach

Twilight setting

Time setting

IP rating

Safety class

Impact-resistance

white

743413

165 x 658 x 110 mm

2 x 18 W / G13, additional switch. capac. 200 W max. /e.g. bathr. / WC extractor fan

230 – 240 V/50 Hz


approx. 1 mW

5.8 GHz


2 – 2000 lux

1 min. – 15 min.

IP 65

II

IK 07




Twilight setting Time setting Setting control

90

Motion Detectors for Indoors

91

LL´N

Intelligent Light Switches

Light switches of today work automatically with-out having to touch them. The intelligent hi-techswitches from STEINEL are the ideal solution forall rooms in which practical lighting is important:corridors, stairwells, bathrooms, WC's, kitchens,basements, laundries as well as any room inwhich the need for light is only temporary.

� Security, convenience and energy savingbecause light comes 'ON' automatically.

� Suitable for retrofitting in standard backboxesas well as for installation in new build and contract work.

� Conventional switches easily replaced withSensorSwitches.

� Useful additional functions, such as permanentlight 'ON' (4 h.) or permanent light 'OFF'.

� Available either in surface-mounted or con-cealed version.

� Attractive range of faceplates for combinationwith other switches and sockets.

IR 180 UP/AP HF 360 UP/AP

92

Setting options

� Control dials for easy adjustment of reach,light 'ON' time and twilight threshold are pro-tected from accidental maladjustment behindthe screw-down trim panel.

� Integrated pushbutton for switching to per-manent light 'ON' (4 hours max.) or perma-nent light 'OFF'. A red LED indicates thefunction selected.

Setting options

� Control dials for easy adjustment of light 'ON' time and twilight threshold are protectedfrom accidental maladjustment behind the lift-up trim panel.

� Integrated pushbutton for switching to per-manent light 'ON' (4 hours max.) or perma-nent light 'OFF'. A red LED indicates thefunction selected.


Sturdy, tried and proven, long-reach sensorswitch using infrared technology. In the con-cealed version, ideal for corridors, kitchensand guest WC's, in the surface-mounted ver-sion for basements, garages, carports andoutside areas.

The SensorSwitch responds to the heat radiatedfrom moving persons. With a reach of 8 meters,they make the ideal choice even for large rooms. The IR 180 AP splashproof surface-mountedversion with IP 54 enclosure protection rating isalso suitable for installation outdoors or in roomsexposed to moisture.

Rapid-response, long-reach and versatilesensor switch using high-frequency tech-nology. In the concealed version, ideal forstairwells, hallways and bathrooms, in thesurface-mounted version for stairwells, basements and laundries.

High-frequency detectors emit a non perceivablesignal and respond to changes in the echo pat-tern caused by movement irrespective of tem-perature. With its generous detection range, virtually instant response behaviour and a reachthat can be infinitely varied between 1 m and 8 m, it is suitable even for difficult spaces.

93

NF 50 UP

This is how it works

� Light is switched 'ON' and 'OFF' withouttouching switch

� A light-emitting diode allows you to locate the sensor surface even in the dark.

SensorSwitches for Concealed and Surface Mounting

The NF 50 UP close-range sensor switcheslight 'ON' or 'OFF' without touching. Ideal forkitchens, bathrooms, workshops, practicesand all rooms where the emphasis is onhygiene, cleanliness and electrical safety.

The NF 50 SensorSwitch is equipped with aclose-range sensor that responds to hand move-ments close up to the sensor (within a distanceof 5 cm). This makes it possible to operate lightssafely and hygienically, even with wet or dirtyhands.

IR 180 UP HF 360 UP NF 50 UP

94

EAN 4007841...

Abmessungen (HxBxT)

Leistung

Netzanschluss

Erfassungswinkel

Reichweite


Zeiteinstellung

Dauerlicht

Dauer-Aus

LED

Schutzart

Schutzklasse

Zubehör

750114

81 x 81 x 58 mm

max. 1000 W(z.B. Glühlampe) max. 500 W(z.B. Leuchtstofflampe)

230 – 240 V, 50 Hz3-Drahtanschluss (L,L’,N)Parallelschaltung möglich

751111

81 x 81 x 55 mm



752118

81 x 81 x 55 mm


230 – 240 V, 50 Hz3-Drahtanschluss (L,L’,N)nicht wechselschaltungsfähig

IR 180 UP HF 360 UP NF 50 UP

180° 360°

IR 180 UP / HF 360 UP

5 cm max.

Lift-up trim panelLight permanently ON/OFF IR 180 UP: Twilight and timer setting

HF 360 UP: Reach, twilight and time settings

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

Permanently 'OFF'

LED

IP rating

Safety class

Accessories

750114

81 x 81 x 58 mm

1000 W max.(e.g. filament bulb) 500 W max.(e.g. fluorescent lamp)

230 – 240 V, 50 Hz3-wire connection (L,L’,N)parallel connection possible


8 m max.

2 – 2000 lux

10 sec. – 30 min.

selectable 4 h

selectable

yes, manual override, perm. 'OFF'

IP 20

II

incl. faceplate

751111

81 x 81 x 55 mm




1 – 8 m max., infinitely variable

2 – 2000 lux

10 sec. – 30 min.

selectable 4 h

selectable


IP 20

II

incl. faceplate

752118

81 x 81 x 55 mm


230 – 240 V, 50 Hz, 3-wire connection (L,L’,N), notsuitable for use in 2-way circuits

at close range

5 cm max.

–

–

–

–

Orientation light

IP 20

II

incl. faceplate


pure white pure white pure white

� Concealed infrared sen-sor, ideal for corridors,kitchens and guest toilets

� Concealed high-frequency sensor, idealfor stairwells, hallwaysand bathrooms

� Concealed, close-rangesensor, ideal for kitchens,bathrooms, workshopsand practices

IR sensor 180° angle ofcoverage

HF-sensor Coverage angle Close-range sensor

Reach

IR 180 AP HF 360 AP

95

EAN 4007841...

Abmessungen (HxBxT)

Leistung

Netzanschluss

Erfassungswinkel

Reichweite


Zeiteinstellung

Dauerlicht

Dauer-Aus

LED

Schutzart

Schutzklasse

750213

82 x 72 x 66 mm

max. 1000 W(z.B. Glühlampen) max. 500 W(z.B. Leuchtstofflampen


751210

82 x 72 x 64 mm

max. 1000 W(z.B. Glühlampen) max. 500 W(z.B. Leuchtstofflampen


IR 180 AP HF 360 AP

017316

10/16 A, 250 V

2-polig,mit Kinderschutz

016913

10 A, 230 V

Aus-/Wechsel schalter

017613

60 – 400 W, 230 V

mit Druck-Aus/Wechsel schalter

Art.-Nr.

Anschluss

Ausführung

016319

1-fach

016418

2-fach

SensorSwitches for Concealed and Surface Mounting / Installation Components

EAN 4007841...

Dimensions (HxWxD)

Output

Voltage

Detection angle

Reach

Twilight setting

Time setting

Manual override

Permanently 'OFF'

LED

IP rating

Safety class

750213

82 x 72 x 66 mm

1000 W max.(e.g. filament bulbs) 500 W max.,(e.g. fluorescent lamps)



8 m max.

2 – 2000 lux

10 sec. – 30 min.

selectable 4 h

selectable


IP 54

II

751210

82 x 72 x 64 mm

1000 W max.(e.g. filament bulbs) 500 W max.,(e.g. fluorescent lamps)



1 – 8 m max., infinitely variable

2 – 2000 lux

10 sec. – 30 min.

selectable 4 h

selectable


IP 54

II

grey grey

� Splashproof, surface-mounted infrared sensor,ideal for basements,garages, carports and out-door areas

� Splashproof surface-mountinghigh-frequency sensor, ideal for stairwells, basementstairs and indoor use

Range of faceplatesfor SensorSwitchesSTEINEL offers an attractive rangeof faceplates for SensorSwitches toensure that the switches of tomor-row fit in well with any home today:

A stylish selection of socket outletsand switches gives a matching lookto intelligent sensors and conven-tional mounting components.

The trims are made of plastic andavailable in pure white.

017316

10/16 A, 250 V

2-pole, with childguard

Earthed socket

016913

10 A, 230 V

OFF/two-way switch

Universal switch

017613

60 – 400 W, 230 V

with push-OFF/ two-way switch

Dimmer for filam.bulbs/conv. transf.

Prod. No.

Power

Model

pure white pure white pure white016319

1-gang

Faceplate

016418

2-gang

Faceplate

pure white pure white

96

7

2

3

6

4

5

1

7

3

IS 130-2

IS 140-2

IS 180-2

IS 240 DUO

IS 360 D TRIO

IS 1

600 W

1000 W

1000 W

1000 W

1000 W

500 W

130° mitUnterkriechschutz140° mitUnterkriechschutz180° mit90° Öffnungswikel240° mit180° Öffnungswinkel360° mit180° Öffnungswinkel

120°

max. 12 m

max. 14 m

max. 12 moder 5 m

max. 12 m

max. 12 m

max. 10 m

8 sec.– 35 min.

8 sec.– 35 min.10 sec.

– 15 min.10 sec.

– 15 min.10 sec.

– 15 min.

8 sec.- 35 min.

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

4Std./h

IS NM 360

IS LED 2in1

1000 W

1000 W

360° mitUnterkriechschutz360° mitUnterkriechschutz

8 mrundum

8 mrundum

5 sec. –15 min.5 sec. –15 min.

2 – 2000 Lux

2 – 2000 Lux

–

–

max. 4 Std.

max. 4 Std.

–

–

Ja

Ja

NightMatic 2000Vario

NightMatic 3000VarioLN 1

SensorLight plus

1000 W

1000 W

11 W/2G7incl.

18 W=100 W15 W= 75 W11 W= 60 W

–

–

–

–

–

–

–

–

–

mit Nacht-sparmodus

–

–

2 – 10 Lux

0,5 – 10 Lux

5 – 200 Lux

2 – 2000 Lux2 – 2000 Lux2 – 2000 Lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

1 Infrarot-Sensoren

2 Dämmerungsschalter

3 AußenSensorLeuchten

4 GartenSensorLeuchten

5 Hausnummern-Leuchten

6 HalogenSensorLeuchten

7 I

Sensor Technology at a Glance

1 Infrared sensors

2 Photoelectric lighting controller

3 OutdoorSensorLights

4 Garden SensorLights

5 House number lights

6 Sensor-switched halogen floodlights

7 IndoorSensorLights

IS 130-2

IS 140-2

IS 180-2

IS 240 DUO

IS 360 D TRIO

IS 1

600 W

1000 W

1000 W

1000 W

1000 W

500 W

130° withsneak-by guard140° withsneak-by guard180° with 90° angle of aperture240° with 180° angle of aperture360° with 180° angle of aperture

120°

12 m max.

14 m max.

12 m or 5 m max.12 m max.

12 m max.

10 m max.

8 sec. – 35 min.8 sec. – 35 min.

10 sec. – 15 min.

10 sec. – 15 min.

10 sec. – 15 min.

8 sec. –35 min.

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

Tech. specs.

Product

Max. output

Detection zone Sensorreach

Time setting

Twilight setting

Watt-o-matic

Manualoverride

Softlight start

Mini-sensor

Motion detectors

IS NM 360

IS LED 2in1

1000 W

1000 W

360° withsneak-by guard360° withsneak-by guard

8 mall-round8 m all-round

5 sec. –15 min.5 sec. –15 min.

2 – 2000 lux

2 – 2000 lux

–

–

4 hrs max.

4 hrs max.

–

–

Yes

Yes

Motion detectors with LED light

NightMatic 2000Vario

NightMatic 3000VarioLN 1

SensorLight plus

1000 W

1000 W

11 W/2G7included

18 W=100 W15 W= 75 W11 W= 60 W

–

–

–

–

–

–

–

–

–

with night-time

econ. mode

–

–

2 – 10 lux

0.5 – 10 lux

5 – 200 lux

2 – 2000 lux 2 – 2000 lux 2 – 2000 lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

Photoelectric lighting controller

97

IR 180 UP/AP

HF 360 UP/AP

NF 50 UP

1000 W

1000 W

1000 W

180° mit90° Öffnungswinkel360° rundum

–

max. 8 m

1 – 8 m

max. 5 cm

10 sec.– 30 min.10 sec.

– 30 min.–

2 – 2000 Lux

2 – 2000 Lux

–

–

–

–

max.4 Std.

max.4 Std.

–

–

–

–

–

–

–

RS 10-1/10-3 LRS 13/21 LRS 16 /16-2/16-3 LRS 100 LFRS 20

FRS 30

BRS 60 L / 61 LBRS 65 L / 66 L

75 W

60 W100 W

2 x 11 W/2G7 inkl.2 x 18 W/G13 inkl.3x40 W/G92x40 W/G9

360° mit160° Öffnungswinkel360° mit160° Öffnungswinkel 360° mit160° Öffnungswinkel 360° mit160° Öffnungswinkel 360° mit160° Öffnungswinkel

Ø 1 – 8 mstufenlos

Ø 1 – 8 m*stufenlosØ 1 – 5 mstufenlos Ø 1 – 8 mstufenlos

Ø 0,5 – 5 mstufenlos

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

4Std./h

ESL Ø 48mm / E 272x40 W/G9

60 W

100 W

100 W

60 W

100 W

100 W

100 W

3x40 W/G9

2x40 W/G9

100 W

100 W

60 W

60 W

60 W

100 W

60 W

100 W

2x9 W/2G7incl.14,8 W

150 W300 W500 W

500 W

L 265-5L 265 SL 270 S/L 271 SL 330 SL 331 SL 306 S/ L 309 SL 262 S

L 11 / L 12

Serie 860

L 870 S

L 170 S / L 190 S

GL 60 S

L 260 S

GL 16 S

Serie 706

L 15

L 560 S/L 562 SL 115 S

L 535 S

L 1

DL 750 S

DL 850 S

XLED Home 1

HS150/HS 300HS 500

HS 5140

max. 8 m

max. 12 m

8 mrundum

max. 8 m

max. 12 m

max. 10 m

max. 12 m

max. 12 m

max. 12 m

max. 12 m

max. 12 m

max. 12 m

max. 8 m

max. 10 m

max. 12 m

max. 12 m

max. 10 m

max. 10 m

max. 12 m

max. 8 m

max. 14 m

max. 12 m

max. 20 m

max. 12 m

5 sec.– 15 min.

5 sec.– 15 min.

5 sec. – 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

8 sec.– 35 min.

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.

5 sec.– 15 min.10 sec.

– 15 min. 5 sec.

– 15 min.8 sec.

– 35 min.10 sec.

– 15 min.10 sec.

– 15 min.8 sec.

– 35 min.8 sec.

– 35 min.5 sec. –15 min.

15 min. –15 min.8 sec.

– 35 min.10 sec.

– 15 min.10 sec.

– 15 min.8 sec.

– 35 min.

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

2 – 2000 Lux

0 oder25 %0 oder25 %

–

0 oder25 %

0 – 50 %

–

0 – 50 %

0 – 50 %

0 – 50 %

0 – 50 %

–

–

0 oder 25 %

–

–

0 – 50 %

–

–

0 – 50 %

0 – 50 %

–

–

–

–

max. 4 Std.

max. 4 Std.

max. 4 Std.

max. 4 Std.

max. 4 Std.

–

max. 4 Std.

max.4 Std.

max.4 Std.

max. 4 Std.

max.4 Std.

–

max. 4 Std.

–

–

–

–

–

max. 4 Std.

max. 4 Std.

–

–

–

–

–

Ja

–

Ja

Ja

–

Ja

Ja

Ja

Ja

Ja

–

Ja

–

–

–

–

–

Ja

–

–

–

–

–

Ja

Ja

Ja

Ja

–

–

–

–

–

–

–

–

Ja

–

–

–

–

–

–

–

–

–

–

–

360° mitUnterkriechschutz

360° mitUnterkriechschutz

360° mitUnterkriechschutz360° mitUnterkriechschutz240° mit180° Öffnungswinkel180 °

180° mit90° Öffnungswinkel180° mit90° Öffnungswinkel180° mit90° Öffnungswinkel360° mit20° Öffnungswinkel240° mit180° Öffnungswinkel180° mit90° Öffnungswinkel360° mitUnterkriechschutz180°

140° mitUnterkriechschutz360° mit120° Öffnungswinkel180° mitUnterkriechschutz180°

360° mit120° Öffnungswinkel360°180° Öffnungswinkel140° mitUnterkriechschutz240° mit180° Öffnungswinkel240° mit180° Öffnungswinkel140° mitUnterkriechschutz

IR 180 UP / AP

IR 360 UP / AP

NF 50 UP

180° with 90° angle of aperture360° all-round detection

–

8 m max.

1 – 8 m

5 cm max.

10 sec. –30 min.

10 sec. –30 min.

–

2 – 2000 lux

2 – 2000 lux

–

–

–

–

4 hoursmax.

4 hoursmax.

–

–

–

–

–

–

–

Tech. specs.

Product

Max. output

Detection zone Sensorreach

Time setting

Twilight setting

Watt-o-matic

Manualoverride

Softlight start

Mini-sensor

RS 10-1/10-3 LRS 13/21 LRS 16 /16-2/16-3 LRS 100 LFRS 20

FRS 30

BRS 60 L / 61 LBRS 65 L / 66 L

75 W

60 W 100 W

2 x 11 W/2G7 incl.2 x 18 W/G13 incl.3x40 W/G92x40 W/G9

360° with 160° angle of aperture360° with 160° angle of aperture 360° with 160° angle of aperture 360° with 160° angle of aperture 360° with 160° angle of aperture

1–8 m dia.infinit. var.1–8 m dia.infinit. var.1–5 m dia.infinit. var. 1–8 m dia.infinit. var.

0.5–5 m dia.infinit. var.

5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

SensorLights for indoors

SensorSwitches

* 3 – 8 m dia. (RS 16/16-2/16-3 L)

ESL 48 mmdia. / E 27 2x40 W/G9

60 W

100 W

100 W

60 W

100 W

100 W

100 W

3x40 W/G9

2x40 W/G9

100 W

100 W

60 W

60 W

60 W

100 W

60 W

100 W

2x9 W/2G7included

14,8 W

150 W300 W500 W

500 W

L 265–5L 265 SL 270 S/L 271 SL 330 SL 331 SL 306 S/ L 309 SL 262 S

L 11 / L 12

860-Series

L 870 S

L 170 S/ L 190 S

GL 60 S

L 260 S

GL 16 S

706–Series

L 15

L 560 S/L 562 SL 115 S

L 535 S

L 1

DL 750 S

DL 850 S

XLed Home 1

HS 150/HS 300HS 500

HS 5140

8 m max.

12 m max.

8 mall–round

8 m max.

12 m max.

10 m max.

12 m max.

12 m max.

12 m max.

12 m max.

12 m max.

12 m max.

8 m max.

10 m max.

12 m max.

12 m max.

10 m max.

10 m max.

12 m max.

7 m max.

14 m max.

12 m max.

20 max.

12 m max.

5 sec. –15 min.5 sec. – 15 min.5 sec. –15 min.5 sec. – 15 min.5 sec. – 15 min.8 sec. –35 min.5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.5 sec. – 15 min.

10 sec. – 15 min. 5 sec. – 15 min.8 sec. – 35 min.

10 sec. – 15 min.

10 sec. –15 min.8 sec. – 35 min.8 sec. – 35 min.5 sec. –15 min.1 min. –15 min.8 sec. –35 min.

10 sec. – 15 min.

10 sec. – 15 min.8 sec. – 35 min.

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

2 – 2000 lux

0 or25%0 or

25 %–

0 or25 %

0 – 50 %

–

0 – 50 %

0 – 50 %

0 – 50 %

0 – 50 %

–

–

0 or25 %

–

–

0 – 50 %

–

–

0 – 50 %

0 – 50 %

–

–

–

–

4 hoursmax.

4 hoursmax.

4 hoursmax.

4 hoursmax.

4 hoursmax.

–

4 hoursmax.

4 hoursmax.

4 hoursmax.

4 hoursmax.

4 hoursmax.

–

4 hoursmax.

–

–

–

–

–

4 hoursmax.

4 hoursmax.

–

–

–

–

–

Yes

–

Yes

Yes

–

Yes

Yes

Yes

Yes

Yes

–

Yes

–

–

–

–

–

Yes

–

–

–

–

–

Yes

Yes

Yes

Yes

–

–

–

–

–

–

–

–

Yes

–

–

–

–

–

–

–

–

–

–

–

SensorLights for outdoors360° withsneak-by guard

360° withsneak-by guard

360° withsneak-by guard360° withsneak-by guard240° with 180° angle of aperture180°

180° with 90° angle of aperture180° with 90° angle of aperture180° with 90° angle of aperture360° with 20° angle of aperture240° with 180° angle of aperture180° with 90° angle of aperture360° withsneak-by guard180°

140° withsneak-by guard360° with 120° angle of aperture180° with sneak-by guard180°

360° with 120° angle of aperture360° with 180° angle of aperture140° withsneak-by guard240° with 180° angle of aperture240° with 180° angle of aperture140° withsneak-by guard

98

Motion detectors and SensorLights for outdoors


STEINEL offers a variety of presentation displays that attractively showcase our products. The cleverly throught-through systems optimise the way products are presented and help to boost sales. STEINEL's brand identity is underscored by numerous sales-promoting details.

Brand presentation with boxed products on the shelf

Working display samples to feel and touch

Sensor centre – the rightsensor for your home

Consumer tips to take homefree of charge

Shelf stopper with informationon use and technical features

The STEINEL brand communi-cates: energy savings, conven-ience, safety and security

99

Shelf Concepts

Brand presentation with overhead sample products

100


SensorLights for indoorsSensorLights for indoors are quickly gaining popularity. With our presentation displays, you can offer your customers awide selection of innovative brand products and secure growth in turnover from a product group with a promising future.

Brand presentation with monitor and boxed products on shelves

Monitor showing film on functions and possible applications

Working display samples to touch



Images showing environmentslights can be used in

L 309 L 15 ws DL 750

L 11

L 12

HS 150pl

L 190 ws

L 560ws LN 1

L 1ws

1

1

2

2

3 4

4

5 6 7 8 9

10 11

11

12

12

13

13

14

14

15

15

16 17

16

17

18 19

19

20

20

10

L 262 L 876 L 170

L 265-5 L 271

L 260 L 867

GL 60

3

5

6

78

9

18

10

101

Infrarot-Sensoren für den AußenbereichShelf Concepts

We will be pleased to team up with you and create display shelvestailored to your specifications.

Shelves displaying the ideal range of products toboost your turnover and earnings.

Brand presentation with overhead sample products

102


Boost your sales –Take advantage of the many additional displays

1/1 euro-pallet: 118 x 107 cm (w x h)

1/1 euro-pallet: 78 x 107 cm (w x h)

103

Infrarot-Sensoren für den AußenbereichAdditional Displays

Countertop display: 62.5 x 51 x 36 cm (w x h x d)

Free-standing display: 166 x 51 x 38 cm (w x h x d)

Sensor column: 100 x 14 x 11 cm(w x h x d)

Space-optimising wire grid display: 15.3 x 100 cm (w x h)

104

0

1

2

3

4

5

6

0

1

2

3

4

5

6

7

8

2nd digit

Protection against contact/application

IP protection rating

The IP code classifies the level of protection provided by enclosures and covers used for protecting electrical equipment. The IP code is defined under IEC 529, EN 60529, DIN VDE 0470-1 and NF C 20-010.The protection ratings are defined by the letters IP (International Protection) followed by two digits. This means that the fullprotection rating consists of the two letters and the digits indicating the level of protection.

1st digitProtection of equipment against the ingress of solid, foreign objects and also protection of persons against contact withhazardous parts.

2nd digitProtection of equipment against the harmful ingress of water.

Where there is no protection rating - with regard to one of the criteria - the digit is replaced with the letter X, e.g. IP X4 or IP 6X.

1st digit

Protection against ingress of foreign objects

No particular personal protection against accidental contact with live and/or moving parts. In enclosures with no access.

Equipment provides no protection against ingressof solid, foreign objects.

0

Protection against accidental contact by large surfaces of the body (back of thehand) with live and/or moving parts. Closed areas only accessible to authorisedand trained personnel.

Protection against ingress of solid, foreign objects in a diameter > 50 mm.

1

Protection against finger contact with live and/or internal moving parts. Specific accessible areas.

Protection against ingress of solid, foreign objectsin a diameter > 12.5 mm.

2

Protection against contact between live and/or internal moving parts and tools,wires or similar objects in a thickness of > 2,5 mm. Generally accessible parts.

Protection against ingress of solid, foreign objectsin a diameter > 2.5 mm.

3

Protection against contact between live and/or internal moving parts andtools, wires or similar objects in a thickness of > 1 mm. Generally accessi-ble parts.

Protection against ingress of solid, foreign objectsin a diameter > 1 mm.

4

Complete protection against contact with live and/or internal moving parts. Areas exposed to short-term high dust deposits.

Protection against harmful, internal dust deposits.Ingress of dust is not entirely prevented. The quantityof dust entering must not interfere with operation(dust-protected).

5

Complete protection against contact with live and/or internal moving parts.Generally accessible areas.

Protection against ingress of dust (dust-tight).6

ApplicationProtection against ingress of waterIn dry areas.No particular protection.0

In areas exposed to moisture with component in predefined vertical position (e.g. condensation water).

Protection against vertically falling drops of water (protection against dripping water). Shall have noharmful effect.

1

In areas exposed to moisture with component not positioned exactly vertically (e.g. condensation water).

Protection against vertically falling drops of water (protection against dripping water). Dripping waterfalling at an angle shall have no harmful effect onequipment (enclosure) tilted at an angle of up to 15° from its normal position.

2

Areas exposed to rain and not splashing water.Protection against water falling at any angle up to 60° from the vertical. Shall have no harmful effect(protection against spraying water.)

3

Areas exposed to rain and splashing water (e.g. areas exposed to passing vehicles).

Protection against water splashing against equipment (enclosure) from any direction. Shall have no harmfuleffect (protection against spraying water).

4

Areas exposed to moderately powerful water jets.Protection against water projected by a nozzleagainst equipment (enclosure) from any direction.Shall have no harmful effect (protection againstwater jets).

5

Areas exposed to heavy wash and floodwater (e.g. jetties).Protection against heavy sea or powerful jets of water. Water in harmful quantities must not enter the equipment (enclosure) (protection against floodwater)

6

Areas washed over temporarily or covered with snow for a prolonged period.Protection against water when equipment (housing)is immersed in water under defined conditions ofpressure and time. Water must not enter in harmfulquantities (immersion).

7

In submerged function.Equipment (housing) is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer (submersion).However, the conditions must not be any more severe than those for digit 7.

8

IP Ratings and Protection Classes

105

IK 00

IK 01

IK 02

IK 03

IK 04

IK 05

IK 06

IK 07

IK 08

IK 09

IK 10

0

0,15

0,2

0,35

0,5

0,7

1

2

5

10

20

0,2 kg

75 mm

0,2 kg

100 mm

0,2 kg

175 mm

0,2 kg

250 mm

0,2 kg

350 mm

0,5 kg

200 mm

0,5 kg

400 mm

1,7 kg

295 mm

5 kg

200 mm

5 kg

400 mm

Test

IK protection code as defined in EN 501 02

The degree of protection provided by enclosures for electrical equipment against external mechanical impacts isdefined by the IK code under standard EN 50102 - VDE 0470 Part 100 and EN 62262.

IK 0X

IK = Code letters (international mechanical protection)0X = IK class of impact protection (from 00 to 10)

IK 00

IK 01

IK 02

IK 03

IK 04

IK 05

IK 06

IK 07

IK 08

IK 09

IK 10

0

0.15

0.2

0.35

0.5

0.7

1

2

5

10

20

IK Energy in joules

0,2 kg

75 mm

0,2 kg

100 mm

0,2 kg

175 mm

0,2 kg

250 mm

0,2 kg

350 mm

0,5 kg

200 mm

0,5 kg

400 mm

1,7 kg

295 mm

5 kg

200 mm

5 kg

400 mm

106

Safety class IIn the case of lights provided with class I protection, the protection aim is achieved by insulating live parts and connecting contactable metal parts to the protective-earth conductor. The protective-earth conductor connectionterminal is marked .

Safety class IIIn the case of lights provided with class II protection, electrical safety is ensured by means of double insulation.

Safety class IIIIn the case of light provided with class III protection, protection is based on safety extra-low voltage (SELV).

Protection classes

Marks of conformity:

VDE labelFor electrotechnical products, including products within the meaning of the German Act on Equipment andProduct Safety (GPSG) and medical products within the meaning of the German Medical Products Act (MPG).The VDE label indicates conformity to VDE provisions or European or internationally harmonised standardsand provides confirmation that the protection requirements of the pertinent guidelines are met. The VDE labelshows that the product is safe in terms of electrical, mechanical, thermal, toxic, radiological and other risk.

VDE-GS labelFor technical work equipment and ready-to-use items of daily use within the meaning of the GPSG (option-ally instead of VDE label for these products)If products are technical work equipment or ready-to-use items of daily use within the meaning of theGerman Act on Equipment and Product Safety, you can also use the VDE-GS label.

VDE-EMC labelFor equipment conforming to the standards on electromagnetic compatibility.The VDE-EMC label expresses a product's conformity with the applicable standards on the electromagneticcompatibility of products. However, this mark also signalises the reliable operation of your product in an electro-magnetic environment. As the requirements on issuing the label automatically and unreservedly cover satisfac-tion of the relevant standards.

ENEC label from VDE For products meeting harmonised certification procedures.The European standards specified in the ENEC Agreement provide the basis for testing. Products (these current-ly being lights, light components, low-energy lamps, IT equipment, transformers, appliance switches, electricalregulators and control devices, terminals, appliance couplers, some types of capacitor and radio interferencesuppression components) tested on this basis are allowed to carry VDE's ENEC label. Approval from anotherbody involved in the European certification procedure is not necessary.

VDE cable markingVDE cable marking applies to cables, leads and wiring conduits and trunkings.

CE label The manufacturer documents and declares in its sole responsibility that the product marked satisfies thebasic requirements of EU directives. This label is not a mark of tested safety and quality but is directedtowards the authority supervising the market.

F labelInformation showing that lights may be mounted on normally flammable surfaces.

Tested safety

HOME

1100

1250

5 04

/201

0 Te

chni

sche

Änd

erun

gen

vorb

ehal

ten

STEINEL Vertrieb GmbHDieselstrasse 80–84D-33442 Herzebrock-ClarholzGermany

Telephone +49 (0)5245 448 - 0Fax +49 (0)5245 448 - 197

www.steinel.de

steinel home catalogue en

Documents