std 000 s11 safety in design contractual
TRANSCRIPT
SAFETY IN DESIGN ANNEXES to Safety Requirement for Design Engineering
REVISION Rev A B C D Date Comments 01/07/2008 First issue 01/10/2008 Update 28/11/2008 Update 27/07/2009 Update Prepared by Checked by F. BELLEMAIN F. BELLEMAIN F. BELLEMAIN F. BELLEMAIN Approved by
SAFETY IN DESIGN ANNEXES
STD.000.S11
Version D
Page 1/3
Engineering Standard STD 000 W 11
STD.000.W11 D_Engineering Std. Metalwork
Engineering Standard STD 000 W 12
STD.000.W12 C_Engineering Std. Metal Fittings
CKHC guideline Safe inching drive arrangement for kiln, ball mill and dryer.
Guideline Inching Drive
Safety in coal grinding shops
Safety in Coal Grinding Shops
Lafarge Industrial Standard for Electrical Rooms
Fire protection & Loss prevention for electrical rooms and cable tunnels - V2.5
SAFETY IN DESIGN ANNEXES
STD.000.S11
Version D
Page 2/3
Appendix to Lafarge Industrial Standard for Electrical Rooms
Appendix to Fire protection & Loss prevention for electrical rooms and cable tunnels - V2.5
Lafarge Industrial Standard for Water supply design
Fire protection & Loss prevention Water supply design V1.2
Appendix to Lafarge Industrial Standard for Water supply design
Appendix to Fire protection & Loss prevention Water supply design V1.2
SAFETY IN DESIGN ANNEXES
STD.000.S11
Version D
Page 3/3