www.hubata-seals.com

Static SealS

Contents

2 O-rings

3 Dimensions and Tolerances

4 Materials

5 Standard elastomers

7 Special elastomers

9 Installation housings and design recommendations

25 General installation instructions

26 Back-up rings

27 Dimensions

62 X-rings

64 Bonded seals

StatiC SealS

The purpose of this catalogue is to present standard seals dimensions.

For information about stock availabilities, please contact our sales department.

We are able to supply other dimensions required.

2

О-rings are closed circular sealing elements. The way they work is based on deformation of the cross section. They are made through vulcanization from form tools as a complete ring.

The simplicity of the shape of an О-ring and the reliability of its function is ingenious, and that is why they are the most frequently used type of seal. They are also economical to manu facture and easy to fit, which makes them unbeatable.

The О-ring designation is given from the dimension of its inner diameter and the cross section thickness in mm, the name of the material and its hardness (elasticity)

e.g. 25 x 1.5 NBR 70

Mode of operation

The sealing function of the installed О-ring is achieved by compression between two or more elements in the sealing gland groove.

When ready to operate, the medium pressure promotes the deformation and increases the sealing effectivity. If the pressure drops to “zero”, the deformation reverts almost to the fitted state.

applications

We differentiate between the static sealing of non-moving or dynamic sealing in moving machine elements. You will find further details in the chapter entitled “Installation housings and design recommendations” on page 9.

O-ringS

3

d 1 Tol d 1 Tol d 1 Tol

≤ 2.5 ± 0.13 75 ± 0.66 272 ± 2.02

4.5 ± 0.14 77.5 ± 0.67 280 ± 2.08

6.3 ± 0.15 80 ± 0.69 290 ± 2.14

8.5 ± 0.16 82.5 ± 0.71 300 ± 2.21

10.0 ± 0.17 85 ± 0.73 307 ± 2.25

11.2 ± 0.18 87.5 ± 0.75 315 ± 2.3

14 ± 0.19 90 ± 0.77 325 ± 2.37

16 ± 0.2 92.5 ± 0.79 335 ± 2.43

18 ± 0.21 95 ± 0.81 345 ± 2.49

20 ± 0.22 97.5 ± 0.83 355 ± 2.56

21.2 ± 0.23 100 ± 0.84 365 ± 2.62

23.6 ± 0.24 103 ± 0.87 375 ± 2.68

25 ± 0.25 106 + 0.89 387 ± 2.76

26.5 ± 0.26 109 ± 0.91 400 ± 2.84

28 ± 0.28 112 ± 0.93 412 ± 2.91

30 ± 0.29 115 ± 0.95 425 ± 2.99

31.5 ± 0.31 118 ± 0.97 437 ± 3.07

33.5 ± 0.32 122 ± 1 450 ± 3.15

34.5 ± 0.33 125 ± 1.03 462 ± 3.22

35.5 ± 0.34 128 ± 1.05 475 ± 3.3

36.5 ± 0.35 132 ± 1.08 487 ± 3.37

37.5 ± 0.36 136 ± 1.1 500 ± 3.45

38.7 ± 0.37 140 ± 1.13 515 ± 3.54

40 ± 0.38 145 ± 1.17 530 ± 3.63

41.2 ± 0.39 150 ± 1.2 545 ± 3.72

42.5 ± 0.4 155 ± 1.24 560 ± 3.81

43.7 ± 0.41 160 ± 1.27 580 ± 3.93

45 ± 0.42 165 ± 1.31 600 ± 4.05

46.2 ± 0.43 170 ± 1.34 615 ± 4.13

47.5 ± 0.44 175 ± 1.38 630 ± 4.22

48.7 ± 0.45 180 ± 1.41 650 ± 4.34

50 ± 0.46 185 ± 1.44 670 ± 4.46

51.5 ± 0.47 190 ± 1.48 >670 ± 0.7%

53 ± 0.48 195 ± 1.51

54.5 ± 0.5 200 ± 1.55 d 2 Tol

56 ± 0.51 206 ± 1.59 ≤ 1.8 ± 0.08

58 ± 0.52 212 ± 1.63 ≤ 2.65 ± 0.09

60 ± 0.54 218 ± 1.67 ≤ 3.55 ± 0.1

61.5 ± 0.55 224 ± 1.71 ≤ 5.3 ± 0.13

63 ± 0.56 230 ± 1.75 ≤ 7 ± 0.15

65 ± 0.58 236 ± 1.79 ≤ 8 ± 0.16

67 ± 0.59 243 ± 1.83 ≤10 ± 0.18

69 ± 0.61 250 ± 1.88

71 ± 0.63 258 ± 1.93

73 ± 0.64 265 ± 1.98

Dimensions and tolerancesBasic tolerances for O-rings DIN ISO 3601 and DIN 3771

For intermediate sizes, the next tolerance up is chosen.

The dimensional tolerances of the finished О-ring are achieved by using appropriately designed form tools and allowing for the shrinkage factor of the elastomer. It is often

possible to use moulds and elastomers with similar shrinkage; in these cases the tolerances in the above chart do not apply.

The quoted tolerances can be reduced even further by modifying the elastomer and using special manufacturing procedures.

4

Hubata Seals offers O-rings in four standard and a wide range of special materials, most of which are elastomers. The starting material for elastomer is caoutchouc, which can be obtained in the form of natural rubber but is nowadays usually used in a synthetic form manufactured by the chemical industry.

Elastomers differ in the basic polymer from which they are made. The following table contains the nomenclature used for elastomers according to DIN ISO 1629 and ASTM D 1418.

Nomenclature for basic polymers

Chemical description Abbreviation

DIN ISO 1629 ASTMD 1418

acrylonitrile-butadiene rubber NBR NBR

hydrogenated acrylonitrile-butadiene rubber (HNBR) HNBR

fluoro rubber FKM FKM

perfluoro rubber (FFKM) FFKM

ethylene propylene diene rubber EPDM EPDM

silicone rubber VMQ VMQ

fluorosilicone rubber FVMQ FVMQ

chloroprene rubber CR CR

polyester urethane AU AU

polyether urethane EU EU

natural rubber NR NR

acrylate rubber ACM ACM

styrene-butadiene rubber SBR SBR

ethylene oxide epichlorhydrine rubber ECO ECO

chlorosulfonated polyethylene CSM CSM

butadiene rubber BR BR

isoprene rubber IR IR

butyl rubber MR IIR

( ) = not listed in the standard

The finished material is created by mixing the basic polymer with the appropriate fillers, softeners, processing aids, curing agents, accelerators and other additives. This process enables us to achieve the specified material properties and offer standard compounds for a wide range of applications as well as special mixtures for highly specialised applications.

The O-ring ultimately achieves its stable shape by the vulcanisation process, in which the plastic rubber mixture changes into a rubber-elastic state and the O-ring acquires its final mechanical properties (hardness, tensile strength, ultimate elongation, compression set etc.).

Materials

5

Hubata Seals has a wide range of O-ring sizes in four standard materials in stock:

Hubata Seals standard compounds

Basic elastomer Abbreviation DIN ISO 1629

Hardness [Shore A]

Colour Temp. range [°C] low high

Acrylonitrile Butadiene Rubber

NBR 7080 + 90

black - 30- 25

100100

120*120**short term

Fluororubber FKM 80 black - 15 200

Ethylene Propylene Diene Rubber

EPDM 70 black - 45 130

Silicone Rubber(Methyl Vinyl Polysiloxane)

VMQ 70 red-brown - 55 200

Temperature range and media resistance are primary criteria when choosing a material. Nevertheless, sufficient consideration must be given to the mechanical-technological values of an elastomer mixture as these are decisive for a seal’s service life. Hubata Seals resistance guide provides details of the different elastomer compounds’ media resistance.

Standard elastomers

nBr—acrylonitrile-butadiene rubber / trade name e.g. Perbunan®—(Bayer)NBR is the most common standard material for О-rings because of its good mechanical properties and resistance to mineral oil-based lubricants and greases. These properties are usually determined by the acrylonitrile content (ACN between 1 8% and 50%). A low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels; as the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves.

The Hubata Seals standard NBR material for О-rings offers an average ACN content to suit a wide range of applications with balanced properties. It has good mechanical-technological values such as high abrasion resistance, as well as low gas permeability and good resistance to mineral oil-based lubricants and greases, hydraulic oils H, H-L, H-LP, non-inflammable pressure liquids HFA, HFB, HFC, aliphatic hydrocarbons, silicone oil and greases, and water to approx. 80°C.

NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol-based brake fluids and non-inflammable hydraulic fluids HFD. It also has a low resistance to ozone, weathering and ageing, but in most applications this has no negative effect.

FKM—fluoro rubber / trade name e.g Viton® (Du Pont-Dow elastomers)

FKM materials are noted for their very high resistance to temperatures and chemicals. Other key benefits are its excellent resistance to ageing and ozone, very low gas permeability (excellent for vacuum application) and the fact that it is self-extinguishing.

The standard FKM material for O-rings has excellent resistance to mineral oils and greases, aliphatic, aromatic and chlorinated hydrocarbons, fuels, non-inflammable hydraulic pressure fluids HFD and many organic solvents and chemicals.

In addition to the standard FKM materials, a number of special compounds with different compositions of polymer chains and varying fluoro-contents (65% to 71%) are developed for special applications.

FKM is generally not resistant to hot water, steam, polar solvents, glycol-based brake fluids and low-molecular organic acids.

6

Comparison of several elastomer properties

Properties Materials

NBR FKM EPDM sulphur

EPDM

peroxide

VMQ HNBR FFKM FVMQ CR AU / EU

Compression set 1 1 3 1 2 1 3 2 2 3

Tear strength 2 2 3 2 4 1 2 3 2 1

Abrasion resistance 2 2-3 2 2 4 2 3 3 2 1

Ageing resistance 4 1 2 2 1 2 1 1 2 1

Ozone resistance 4 1 2 2 1 2 1 1 2 1

Resistance to oil and grease 2 1 5 5 3 2 1 2 3 2

Fuel resistance 4** 2 * * 5 5 4 3 1 2 3 3

Resistance to hot water [°C] 80** 80** 130 150 100 100** * * * 100 80 50

Resistance to steam [°C] - - 130 175 120* - * * * 120* - -

Heat resistance standard materials [°C] 100 200 130 150 200 150 260 175 100 100

Heat resistance special materials [°C] 120 - - - 250 - 330 _ _

Low temperature resistance standard materials [°C]

-30 -15 -45 -50 -55 -30 -15 -55 -40 -40

Low temperature resistance special materials [°C]

-50 -35 -40 -35 -50

1 = very good / 2 = good / 3 = average / 4 = low / 5 = weak * =short term / * * = better result only with special compound / * * * = depends on compound

ePDM—ethylene propylene diene rubber / trade name e.g. nordel®, (Du Pont-Dow elastomers)

EPDM materials generally have a high resistance to hot water, steam, ageing and chemicals, and are suitable for a wide range of temperature applica tions. They are divided into sulphur-and peroxide-cured types. Peroxide-cured compounds are suitable for higher temperature ranges and have a much lower compression set.

EPDM has a good resistance to hot water and steam, detergents, caustic potash solutions, sodium hydroxide solutions, silicone oil and greases, many polar solvents, many diluted acids and chemicals. Special qualities are recommended for glycol-based brake fluids. EPDM materials are totally unsuitable for use with all mineral oil products (lubricants, fuels). They can be used between -45°C and +1 30°C (peroxide-cured -50°C to +150°C).

VMQ—silicone rubber / trade name e.g. Silopren® (Bayer)Silicone rubbers are noted for its wide thermal range and excellent resistance to ozone, weathering and ageing. Compared with other elastomers, silicone’s mechanical properties are on the low side. Generally, silicone materials are physiologically harmless; they are also used by the food and medical industries.

The standard silicone material can be applied at temperatures from -55°C to +200°C and is resistant to water (up to 100°C), alphatic engine and transmission oils, animal and plant oils and fats.

Silicone is generally not resistant to fuels, aromatic mineral oils, steam (short term up to 1 20°C possible), silicone oils and greases, acids and alkalis.

7

HnBr—hydrogenated acryloni-trile-butadiene rubber / trade name e.g. therban® (Bayer)

HNBR is obtained by fully or partly hydrogenating NBR. It leads to considerable improvement of the resistance to heat, ozone and ageing, and gives it very good mechanical properties. The media resistance com pares to that of NBR.

FFKM—perfluoro rubber /trade name Kalrez® (Du Pont-Dowelastomers)The chemical and heat resistance of perfluoro elastomers are similar to those of PTFE. They combine the positive properties of PTFE with the elastic behaviour of FKM. Because this material group is considerably more expensive, perfluoro elastomers are only used if other materials cannot meet the specifications and if safety requirements justify the higher expenditure.

Typical applications for perfluoro elastomers include the chemical, oil and semi-conductor industries, high-vacuum technology, and the aerospace industry.

FVMQ—fluorosilicone rubber / trade name e.g. Silastic lS® (Dow Corning)

Although fluorosilicone elastomers have the same mechanical properties as silicone, they are far more resistant to oils and fuels. The temperature range of applications is somewhat more restricted than that of silicone.

Cr—chloroprene rubber / trade name e.g. neoprene® (Du Pont-Dow elastomers)

Chloroprenes have excellent resistance to ozone, ageing and weathering and also good mechanical properties. They have average resistance to mineral oils, and are suitable for use with many refrigerants.

aU—polyester urethane eU—polyether urethane Polyurethane /trade name e.g Desmopan® (Bayer)

Polyurethanes differ from classic elastomers in that they have much higher mechanical properties for example a high resistance to abrasion, wear and extrusion, a high tensile strength and tear resistance. The material is resistant to ageing and ozone, and can be used with mineral oils and greases, silicone oils and greases, non-inflammeble fluids HFA and HFB and water up to of 50°C, as well as pure aliphatic hydrocarbons.

SBr—styrene-butadiene rubber / trade name e.g. Buna Hüls® (Hüls)SBR is used in glycol-based brake fluids, water, alcohols, glycols, silicone oils and greases. The temperature application range is from -50°C to +100°C.

TFE/P—tetrafluoroethylene-propylene rubber /trade name e.g. Aflas® (3M)

TFE/P is a relatively new addition to the group of fluoroelastomers and is noted for its excellent thermal (0°C to +200°C) and chemical resistance. It is particularly suitable for use in hot water, steam, acids, alkaline solutions, ammonia, amines, alloyed engine and transmission oils, brake fluids (based on glycol, mineral oil and silicone oil), crude oil, and sour gas.

aCM—acrylate rubberACM is used mainly by the automotive industry as it is resistant to engine, transmission and ATF oils even at high temperatures. The temperature application range is from -20°C to + 150°C.

Special elastomers

8

nr—natural rubberNatural rubber is still obtained from the latex of certain plants. Vulcanized natural rubber has good low-temperature and mechanical properties and a high elasticity. NR vulcanized materials are resistant to water, glycols, alcohols, glycol-based brake fluids, silicone oils and greases and diluted acids and bases. The temperature application range is from approx. -50°C to +80°C.

PtFe O-rings, PtFe-encapsulated O-rings, PtFe - polytetrafluoroethylene

PTFE is a fluorinated plastic material. It is noted for its almost universal resistance to chemicals, wide temperature range (-100°C to +250°C), extremely low coefficient of friction, physiological suitability and almost unlimited resistance to ozone, weathering and ageing.

Solid PTFE O-rings are far less elastic than elastomer O-rings, which means they are difficult to install (the installation space usually has to be split), and they tend to “flow”, especially at high temperatures. This is why slotted PTFE O-rings and PTFE-encapsulated elastomer O-rings are used. The position of the gap (pure PTFE O-rings) or of the joint or overlap (PTFE-encapsulated O-rings) is determined here, depending on the particular application.

FeP-encapsulated O-rings FeP—fluorinated ethylene-propylene

FEP is a thermoplastic material with similar properties to PTFE. Seamless FEP-encapsulated O-rings have an elastic core in FKM or VMQ. They are used at very high thermal and chemical loads. The extremely high chemical resistance of the cover protects the elastic core material against the chosen medium. Another advantage of the cover is its very low coefficient of friction.

This results in a combination of very high chemical and thermal load-bearing ability and the elastic properties of standard commercial elastomers. The core material is chosen to suit the temperature range and medium.

Because of its limited flexibility, great care is required during installation. Warming the material in water or oil to between approx. 80°C and 100°C in creases flexibility and supports the installation.

Depending on the core material, the temperature application range is from -55°C to +200°C.

9

Static sealing, internal sealing, rectangular groove by radial deformation

The installation housings (grooves) for О-rings should if possible be produced with right angles. The dimensions for the required depth and width depend on the particular application and cross-section. The dimensions are recommendations for the particular type of installation, and refer to the nominal sizes. They should be observed because the sealing function depends on the precise execution of the grooves.

О-rings are ideal for sealing resting machine elements. We speak of a static or resting seal when the machine elements that are to be sealed do not move in relation to each other. If the groove is executed correctly, the items used as intended and the right material chosen, О-rings can seal pressures of up to 1000 bar. (Back-rings may also be required.)

Rectangular groove by radial deformationThis type of sealing is the preferred choice for sealing pins, bolts, tube connections or cylindrical tubes. The О-ring section is deformed radially on installation, i.e. in the direction of the centre of the bolt/pipe. The position of the groove, whether on the inside or the outside, does not play a functional part on solid components, but depends on the processing and installation possibilities. On thin walled parts where elastic deformation could occur such as with a cylindrical pipe, the groove should be on the fixed outer part (cylinder bottom) so that the groove on the side that is not subject to pressure does not increase as the item opens out.

installation housings and design recommendations

Static Sealing

10

d2 Groovedeptht +0.05

Groovewidthb + 0.25

Lead-inchamferC

d2 Groovedeptht +0.05

Groovewidthb + 0.25

Lead-inchamferC

1 0.75 1.3 1.2 4 3.2 5.2 31.2 0.9 1.6 1.2 4.3 3.4 5.6 31.25 0.9 1.7 1.2 4.5 3.6 5.8 31.3 1 1.7 1.2 5 4 6.5 31.5 1.1 2 1.5 5.3 4.3 7 3

1.6 1.2 2.1 1.5 5.33 4.3 7.1 3.51.78 1.3 2.4 1.5 5.5 4.5 7.2 3.51.8 1.3 2.4 1.5 5.7 4.6 7.6 3.51.9 1.4 2.5 1.5 6 4.9 7.9 3.52 1.5 2.6 2 6.5 5.4 8.4 4

2.2 1.7 3 2 6.99 5.8 9.2 42.4 1.8 3.2 2 7 5.8 9.3 42.5 1.9 3.3 2 7.5 6.3 9.8 42.6 2 3.4 2 8 6.7 10.5 42.62 2 3.5 2 8.4 7.1 10.9 4.5

2.65 2 3.6 2 8.5 7.2 1 1 4.52.7 2.1 3.6 2 9 7.7 1 1.7 4.52.8 2.2 3.7 2 9.5 8.2 12.3 4.53 2.3 3.9 2.5 10 8.6 13 53.1 2.4 4 2.5 10.5 9 13.8 5

3.5 2.7 4.6 2.5 1 1 9.5 14.3 53.53 2.7 4.7 2.5 12 10.5 15.6 53.55 2.8 4.7 2.5 15 13.2 19.2 53.6 2.8 4.8 2.53.7 2.9 4.9 2.5

groove dimensions

Static sealing, external sealing, rectangular groove by radial deformation

11

Static sealing, pressure from inside, rectangular groove by axial deformation

Rectangular groove by axial deformation

This type of installation is used primarily for flange and cover sealing. The О-ring cross section is deformed axially.

Note that the О-ring should be placed against the non-pressure side of the groove on installation in order to prevent it from moving in the groove when pressure is applied or increases.

If the О-ring moves in the groove, it will be stretched and compressed, which causes material fatigue and premature wear. Observing the pressure direction will prevent the surface of the О-ring from possibly rolling, and thus being destroyed.

■ If pressure is applied from the inside, the outer diameter of the О-ring should be placed against the outer diameter of the groove, or else be up to max. 3% bigger (the О-ring will be compressed).

■ If pressure is applied from the outside, the inner diameter of the О-ring should be placed against the inner diameter of the groove or else be up to max. 6% smaller (the О-ring will be stretched).

When the item is intended for axial installation, the cover screwing should be very strongly designed to ensure that the gap between the sealed surfaces never exceeds the permitted size. The pressure could otherwise squeeze out the O-ring.

12

d2 Groovedeptht +0.05

Groovewidthb + 0.25

d2 Groovedeptht +0.05

Groovewidthb + 0.25

1 0.7 1.4 4 3.1 5.51.2 0.9 1.6 4.3 3.3 5.91.25 0.9 1.7 4.5 3.5 6.11.3 1 1.7 5 4 6.71.5 1.1 2.1 5.3 4.2 7.2

1.6 1.2 2.2 5.33 4.2 7.31.78 1.3 2.5 5.5 4.5 7.41.8 1.3 2.6 5.7 4.6 7.61.9 1.4 2.7 6 4.8 8.12 1.5 2.8 6.5 5.3 8.6

2.2 1.6 3.1 6.99 5.7 9.72.4 1.8 3.3 7 5.7 9.72.5 1.9 3.5 7.5 6.2 10.12.6 2 3.6 8 6.6 10.72.62 2 3.7 8.4 7.1 11.1

2.65 2 3.8 8.5 7.2 1 1.32.7 2.1 3.8 9 7.6 122.8 2.1 4 9.5 8.1 12.53 2.3 4.1 10 8.5 13.63.1 2.4 4.2 10.5 8.9 14

3.5 2.7 4.8 1 1 9.4 14.73.53 2.7 4.9 12 10.4 15.73.55 2.7 5 15 13.2 19.43.6 2.8 5.13.7 2.9 5.2

groove dimensions

Static sealing, pressure from outside, rectangular groove by axial deformation

13

Trapezoidal grooveTrapezoidal grooves are difficult and expensive to manufacture. This groove geometry is only worthwhile if the О-ring needs to be held in the groove during assembly, for the application and removal of compression moulding tools, or for overhead installations.

A trapezoidal groove is really only advisable for cross sections of 2 mm and more. The average groove diame ter equates to the inner diameter plus the cord thickness of the O-ring.

Static sealing, trapezoidal groove

14

d2 Groovedeptht ±0.05

Groovewidthb±0.05

r2 r1

2 1.5 1.6 0.4 0.252.2 1.6 1.7 0.4 0.252.4 1.8 1.9 0.4 0.252.5 2 2 0.4 0.252.6 2.1 2.1 0.4 0.25

2.62 2.1 2.1 0.4 0.252.65 2.1 2.1 0.4 0.252.7 2.2 2.1 0.4 0.252.8 2.3 2.2 0.4 0.253 2.4 2.4 0.4 0.25

3.1 2.5 2.5 0.4 0.253.5 2.8 2.9 0.8 0.253.53 2.8 2.9 0.8 0.253.55 2.8 2.9 0.8 0.253.6 2.9 3 0.8 0.25

3.7 3 3.1 0.8 0.254 3.2 3.3 0.8 0.254.3 3.3 3.6 0.8 0.254.5 3.7 3.7 0.8 0.255 4.2 4 0.8 0.25

5.3 4.6 4.2 0.8 0.45.33 4.6 4.2 0.8 0.45.5 4.7 4.4 0.8 0.45.7 4.9 4.5 0.8 0.46 5.1 4.7 0.8 0.4

6.5 5.6 5.1 0.8 0.46.99 6 5.6 1.6 0.47 6 5.6 1.6 0.47.5 6.4 6.1 1.6 0.48 6.9 6.3 1.6 0.4

8.4 7.3 6.7 1.6 0.58.5 7.4 6.8 1.6 0.59 7.8 7.2 1.6 0.59.5 8.2 7.7 1.6 0.510 8.7 8 1.6 0.5

15

Conical grooveIn individual cases involving screwed flange and cover sealing design, requirements may call for a conical groove. However, with this particular groove geometry it can be difficult to ensure a defined deformation of the О-ring. Furthermore, the restricted space of a conical groove can be disadvantageous if the surrounding media then cause the О-ring to swell.

Static sealing, conical groove

16

d2 Side length b Tolerance (+) r1

1 1.45 0.1 0.251.2 1.7 0.1 0.251.25 1.75 0.1 0.251.3 1.8 0.1 0.31.5 2.1 0.1 0.3

1.6 2.15 0.1 0.31.78 2.4 0.1 0.31.8 2.45 0.1 0.31.9 2.6 0.1 0.42 2.75 0.1 0.4

2.2 3 0.1 0.42.4 3.25 0.15 0.42.5 3.4 0.15 0.52.6 3.55 0.15 0.52.62 3.6 0.15 0.5

2.65 3.6 0.15 0.52.7 3.7 0.15 0.62.8 3.8 0.15 0.63 4.1 0.2 0.63.1 4.25 0.2 0.6

3.5 4.8 0.2 0.83.53 4.8 0.2 0.83.55 4.85 0.2 0.83.6 4.9 0.2 0.93.7 5.05 0.2 0.9

4 5.5 0.2 1.24.3 5.9 0.2 1.24.5 6.15 0.2 1.25 6.85 0.25 1.25.3 7.25 0.25 1.4

5.33 7.3 0.25 1.45.5 7.55 0.25 1.55.7 7.8 0.25 1.56 8.2 0.3 1.56.5 8.9 0.3 1.7

6.99 9.6 0.3 27 9.6 0.3 27.5 10.3 0.3 28 11 0.4 28.4 11.55 0.4 2

8.5 11.7 0.4 29 12.4 0.4 2.59.5 13.05 0.4 2.510 13.7 0.4 2.510.5 14.4 0.4 2.5

10 15.1 0.4 2.512 16.5 0.5 315 20.6 0.5 3

groove dimensions

17

Static sealing, vacuum sealing

Vacuum sealingVacuum sealing is a special kind of static О-ring sealing. In this type, the system pressure that is to be sealed is less than the atmospheric pressure (patm= 1.01325 bar).

Contrary to the general installation guidelines for static О-ring sealing, the following recommendations apply for vacuum sealing:

■ The groove should be almost 100% filled by the deformed O-ring. This creates greater contact surfaces and increases the diffusion time through the elastomer material.

■ The deformation of the O-ring section should be about 30%.

■ A vacuum grease should be used (reduces leakage).

■ The surface quality (roughness depth) of the groove and sealed surfaces should be considerably better than of standard static sealing, and the percentage contact area should be tp > 50%.

■ The chosen elastomer should be gas compatible, have low permeability and a low compression set. We recommend fluoro rubber for standard applications.

18

d2 Groove depth t -0..05

Groove width b±0.05

r 1 r2

1.5 1.05 1.8 0.1 0.21.78 1.25 2.1 0.1 0.21.8 1.25 2.1 0.1 0.22 1.4 2.3 0.1 0.32.5 1.75 2.9 0.1 0.3

2.6 1.8 3 0.1 0.42.62 1.85 3.1 0.1 0.42.65 1.85 3.1 0.1 0.42.7 1.9 3.15 0.1 0.42.8 1.95 3.2 0.1 0.4

3 2.1 3.5 0.1 0.63.1 2.2 3.6 0.1 0.63.5 2.45 4.1 0.2 0.63.53 2.5 4.1 0.2 0.63.55 2.5 4.15 0.2 0.6

3.6 2.5 4.2 0.2 0.63.7 2.6 4.3 0.2 0.64 2.8 4.7 0.2 0.64.5 3.15 5.3 0.2 0.85 3.5 5.9 0.2 0.8

5.3 3.7 6.3 0.2 15.33 3.7 6.3 0.2 15.5 3.8 6.6 0.2 15.7 4 6.7 0.2 16 4.2 7.1 0.2 1

6.5 4.6 7.6 0.2 16.99 4.9 8.2 0.3 17 4.9 8.2 0.3 17.5 5.3 8.7 0.3 18 5.6 9.4 0.3 1

8.4 5.9 9.9 0.3 18.5 6 10 0.3 19 6.4 10.5 0.3 19.5 6.7 1 1.2 0.3 110 7.1 1 1.7 0.3 1

groove dimensions

19

HydraulicsО-rings should only be used to seal hydraulic pistons and rods if there is little space for the installation, or if the rod stroke is relatively short with a low frequency, and the seal does not have to be completely leak-proof. In fact, a tiny amount of leakage is desirable as it provides a lubricant film that reduces friction and wear.

Dynamic sealing, internal sealing, rectangular groove by radial deformation

О-rings are used successfully as sealing elements in dynamic applications. However, their use is limited to lower pressures and speeds, or to use in small installation housings.

Because of the friction resistance in movement, e.g. in hydraulic or pneumatic components, a smaller О-ring deformation is chosen than for static sealing. The item should always be well lubricated in order to prevent a loss of power due to friction and premature wear of the О-ring if it runs dry.

The installation housings are the same for the reciprocating movement, and for the movement with simultaneous rotating (helical) movement. There are differences between the housings of hydraulic and pneumatic applications, because of the differences in pressure and lubrication.

Dynamic sealing

20

d2 Groove depth t+0.05

Groove Width b+0.25

Lead-in chamfer С

d2 Groove depth t+0.05

Groove Width b+0.25

Lead-in chamfer С

1 0.9 1.3 1 3.7 3.2 4.8 21.2 1 1.6 1 4 3.5 5.1 21.25 1.1 1.6 1 4.3 3.8 5.5 2.51.3 1.1 1.7 1.2 4.5 4 5.7 2.51.5 1.3 1.9 1.2 5 4.4 6.4 2.7

1.6 1.4 2 1.2 5.3 4.7 6.8 2.91.78 1.5 2.3 1.3 5.33 4.7 6.9 2.91.8 1.5 2.4 1.3 5.5 4.9 7.1 31.9 1.6 2.5 1.3 5.7 5.1 7.2 32 1.7 2.6 1.3 6 5.4 7.5 3.6

2.2 1.9 2.8 1.3 6.5 5.8 8.1 3.62.4 2.1 3 1.4 6.99 6.2 8.8 3.62.5 2.2 3.1 1.4 7 6.2 8.9 3.62.6 2.2 3.3 1.5 7.5 6.7 9.4 3.82.62 2.2 3.4 1.5 8 7.1 10.2 4

2.65 2.3 3.4 1.5 8.4 7.5 10.6 4.22.7 2.4 3.4 1.5 8.5 7.6 10.8 4.22.8 2.4 3.6 1.6 9 8.1 11.4 4.53 2.6 3.8 1.8 9.5 8.5 12 4.53.1 2.7 3.9 1.8 10 9 12.6 4.5

3.5 3.1 4.4 2 10.5 9.5 13.2 53.53 3.1 4.5 2 11 9.9 13.9 53.55 3.1 4.5 2 12 10.9 15.1 53.6 3.1 4.6 2 15 13.7 18.8 5

groove dimensions

Dynamic sealing, external sealing, rectangular groove by radial deformation

21

PneumaticsIn pneumatics, O-rings are used primarily to seal reciprocating movements. The deformation of the O-ring should be less than in hydraulic applications in order t keep the loss of power due to friction down, even with inadequate lubrication, in order to achieve the maximum possible lifetimes.

Dynamic sealing, internal sealing, rectangular groove by radial deformation

22

d2 Groove depth t+0.05

Groove Width b+0.25

Lead-in chamfer С

d2 Groove depth t+0.05

Groove Width b+0.25

Lead-in chamfer С

1 0.95 1.2 0.9 4 3.7 4.8 21.2 1.05 1.5 1 4.3 4 5.1 21.25 1.15 1.5 1 4.5 4.2 5.4 2.31.3 1.15 1.6 1.1 5 4.65 5.9 2.31.5 1.35 1.8 1.1 5.3 4.95 6.4 2.7

1.6 1.45 1.9 1.2 5.33 4.95 6.4 2.71.78 1.55 2.2 1.2 5.5 5.15 6.5 2.81.8 1.55 2.3 1.2 5.7 5.35 6.8 31.9 1.7 2.3 1.2 6 5.6 7.2 3.12 1.8 2.4 1.2 6.5 6.1 7.8 3.3

2.2 2 2.6 1.4 6.99 6.55 8.4 3.62.4 2.15 2.9 1.4 7 6.6 8.4 3.62.5 2.25 3 1.4 7.5 7.1 8.9 3.82.6 2.35 3.1 1.4 8 7.6 9.5 42.62 2.35 3.1 1.5 8.4 7.9 10.1 4.2

2.65 2.35 3.2 1.5 8.5 8 10.2 4.22.7 2.45 3.3 1.5 9 8.5 10.8 4.32.8 2.55 3.4 1.5 9.5 9 11.4 4.33 2.7 3.6 1.5 10 9.5 12 4.53.1 2.8 3.7 1.5

3.5 3.15 4.2 1.83.53 3.2 4.3 1.83.55 3.2 4.3 1.83.6 3.3 4.3 1.83.7 3.4 4.4 1.8

groove dimensions

Dynamic sealing, external sealing, rectangular groove by radial deformation

23

Surface qualities

Type of sealing application

Surface Pressure Ra [µm] Rz [µm] Rmax [µm]

dynamic counter surface a ≤ 0.4 ≤ 1.2 ≤ 1.6radial groove base b ≤ 1.6 ≤ 3.2 ≤ 6.3

groove flanks с ≤ 3.2 ≤ 6.3 ≤ 10

static sealing surface a not ≤ 1.6 ≤ 6.3 ≤ 10radial / axial groove base b pulsating ≤ 3.2 ≤ 10 ≤ 12.5

groove flanks с ≤ 6.3 ≤ 12.5 ≤ 16

sealed surface a pulsating ≤ 0.8 ≤ 1.6 ≤ 3.2groove base b ≤ 1.6 ≤ 3.2 ≤ 6.3groove flanks с ≤ 3.2 ≤ 6.3 ≤ 10

Once the dimensions and geometric shape of the installation housing have been determined, the following details must be observed for a correct function.

■ Any component edges and transition points that come into contact with the О-ring should be burr-free, rounded and polished if necessary.

■ The transition point between the groove flank and groove base r2, and the transition between the groove flank and component surface rl, must be slightly rounded.

The radii relating to the cross section are given in the following table:

d2 r1 r2

1 – 2 0.1 0.32 – 3 0.2 0.33 – 4 0.2 0.54 – 5 0.2 0.65 – 6 0.2 0.6

6 – 7 0.2 0.88 – 10 0.2 110 – 12 0.2 112 - 15 0.2 1.2

■ The surface quality is to be designed for the particular application. For dynamic applications, the surface must be finer than for a static one the same also applies for pulsating pressures.

■ Avoid marks, holes and scratches on the surface.

■ Roughness values are classified to DIN 4768 with various parameters. In many cases, simply stating the average roughness value Ra is not sufficient for classifying the surface quality, and so the average roughness depth Rz, maximum roughness depth Rmax and the contact area percentage tp are also quoted. The contact area percentage should be more than 50% if at all possible.

Design guidelines

24

Maximum permitted values for radial sealing gap g [mm]The permitted values for the sealing gap are determined by the pressure, material hardness and diameter.

Type of sealing application

Pressure [bar] Material hardness [Shore A]70 80 90

static ≤ 60 0.2 0.25 0.3> 60–100 0.1 0.2 0.25> 100–160 0.05 0.1 0.2> 160–250 – 0.05 0.1> 250–350 – – 0.05

dynamic ≤ 30 0.2 0.25 0.3> 30–60 0.1 0.17 0.2> 60–80 – 0.1 0.15> 80–100 – – 0.1

The gap dimensions given in the chart apply for all elastomer materials with the exception of silicone.

Back-up rings are to be used with bigger gap dimensions.

lead-in chamfersLead-in chamfers should be used to prevent damage to the О-ring and ensure correct installation.

The angles between the lead-in chamfers and the level should be between 15° and 20°. Chamfer lengths С are given in the groove dimension tables.

Sealing gapThe gap that is to be sealed should be as small as possible, so the fits and tolerances shown on installation tables and drawings should be observed.

However, do not forget that working loads, such as those exerted on a cylindrical tube under high pressure, will cause the gap to expand. If the gap is too big, there is a strong risk of gap extrusion. This means that the О-ring migrates into the gap as pressure is applied, where it will soon be destroyed.

In cases of dynamic sealing, the O-ring is destroyed by ripping and peeling. We recommend the use of back-up rings to protect the О-ring against gap extrusion.

25

Avoid damaging the O-ring during installation as this will cause leakage. Observe the following:

■ The O-ring must not be expanded to its elongation limit.

■ Edges must be burr-free; radii and angles applied smoothly.

■ Dust, dirt, metal chips and other particles are to be removed

■ Tips of screws and installation housings for other sealing and guiding elements should be covered by an assembly sleeve.

■ A suitable grease is to be applied to the assembly surfaces and O-rings.

■ Elastomer materials are made smoother if they are heated in oil or hot water to approx. 80°C. This makes it easier to stretch the O-ring for assembly.

■ Any assembly tools used, such as expansion mandrels or sleeves, should be made of a soft material (e.g. POM) and not have any sharp edges.

■ The O-ring should not be rolled over assembly surfaces. Ensure the O-ring is not twisted as it slots into the groove.

general installation instructions

26

Back-up rings are used to prevent O-rings from gap extrusion. In the case of the combination of rising pressures and large sealing gaps there is the risk, that the O-ring material will be pressed into the sealing gap on the low pressure side. If this is repeated several times and the pressure continues rising, the O-ring can be damaged irreversible and finally get completely destroyed.

Back-up rings do not provide any sealing function. Through reduction of the sealing gap on the low pressure side they take care, that the O-ring can fulfill it’s sealing function without being damaged.

MaterialsThe selection of materials for back-up rings is primarily based upon the pressure and the appropriate extrusion resistance resp. hardness. Additionally parameters like hight of the extrusion gap, media resistance and temperature range have to be taken into consideration. In practice there are various plastics and elastomers like for example PTFE, PA, POM, polyurethane, polyesterelastomer as well as NBR, FKM and EPDM available.

installation housingsBack-up rings are normally installed in wider designed housings on the low pressure side. Because of the plurality of O-ring housings which are common in the market, the back-up ring dimensions normally have to be adapted to the existing housing geometry. To layout back-up rings the following parameters are required:

– housing dimensions, including tolerances

– type of application: static / dynamic sealing internal / external sealing

– O-ring dimensions pressure, medium, temperature

If back-up rings from existing dimension ranges are used e.g. like NBR 90 the installation housing has to be designed according to the producers guidelines.

Please contact us for any further assistance.

Back-up rings

27

DiMenSiOnS

28

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

0.7 1.50.73 1.020.75 10.75 1.020.78 1.020.8 0.50.8 1.250.8 20.9 1.520.9 1.61 11 1.51 21.02 1.781.06 1.251.07 1.211.07 1.251.07 1.271.1 21.15 11.2 11.2 1.11.2 1.251.2 21.22 1.071.24 2.621.25 11.25 1.51.27 1.021.3 11.3 1.11.35 1.631.4 1.251.4 1.271.4 1.651.42 1.521.42 1.781.44 1.011.5 0.851.5 11.5 1.021.5 1.071.5 1.21.5 1.251.5 1.31.5 1.51.5 1.751.5 21.6 11.6 1.11.6 1.21.6 1.31.6 1.351.6 1.41.6 1.61.6 1.781.65 1.61.7 1.51.7 2.41.75 0.81.77 1.011.78 0.911.78 1.021.78 1.191.78 1.781.8 0.81.8 11.8 1.02

1.8 1.21.8 1.41.8 1.51.8 1.81.85 1.51.9 1.351.9 1.781.9 2.62 0.52 0.652 0.72 12 1.12 1.252 1.32 1.52 1.62 1.72 1.752 1.82 22 2.252 2.52 32.01 1.62.06 2.622.13 1.72.13 3.22.15 1.42.2 0.52.2 12.2 1.32.2 1.62.2 1.82.2 2.22.24 1.782.24 1.82.3 0.652.3 0.82.3 1.22.3 1.32.3 1.52.3 2.42.31 1.52.35 12.37 2.622.4 1.052.4 1.92.4 2.82.49 0.662.5 0.652.5 12.5 1.22.5 1.32.5 1.52.5 1.62.5 1.752.5 1.782.5 1.82.5 22.5 2.252.5 32.54 1.022.57 1.782.59 0.992.6 12.6 1.22.6 1.25

2.6 1.32.6 1.42.6 1.72.6 1.82.6 1.92.6 22.6 2.252.66 1.972.68 1.782.69 0.632.69 1.372.7 12.7 1.22.7 1.52.7 1.62.7 1.82.7 1.92.73 1.72.75 1.252.75 1.62.79 1.022.79 1.242.8 0.82.8 12.8 1.12.8 1.32.8 1.52.8 1.62.8 1.82.8 1.92.8 3.12.82 1.522.84 1.782.84 2.622.85 2.322.87 1.092.9 0.52.9 0.852.9 12.9 1.052.9 1.752.9 1.782.9 2.622.95 0.792.95 0.973 0.93 13 1.13 1.23 1.253 1.53 1.63 1.753 1.83 1.853 23 2.43 2.73 33 3.53 3.93 43 4.53.05 1.273.1 1.253.1 1.63.15 1.253.15 1.8

3.17 1.783.2 13.2 1.053.2 1.13.2 1.23.2 1.53.2 1.63.2 1.783.2 1.83.2 2.53.2 33.25 0.633.3 0.63.3 13.3 1.33.3 1.53.3 1.73.3 2.43.3 2.53.34 0.53.35 1.783.4 0.53.4 0.93.4 13.4 1.33.4 1.73.4 1.83.4 1.93.4 2.83.45 2.023.5 0.93.5 13.5 1.13.5 1.23.5 1.33.5 1.53.5 1.63.5 1.83.5 23.5 2.53.5 2.63.5 33.5 3.93.53 1.023.55 1.63.55 1.83.56 1.273.6 1.33.6 23.6 2.43.6 2.73.62 1.643.63 2.623.65 1.783.66 1.193.66 1.93.68 1.253.68 1.783.7 13.7 1.23.7 1.63.7 1.83.7 1.93.7 2.83.72 1.023.75 1.83.8 13.8 1.1

3.8 1.253.8 1.273.8 1.353.8 1.53.8 1.73.8 1.753.8 1.93.8 2.43.8 2.83.81 0.613.89 1.553.9 1.83.95 1.783.96 1.64 14 1.24 1.34 1.54 1.64 1.754 1.84 1.94 24 2.24 2.54 2.64 2.624 34 3.54 44 4.54 54 5.54.1 1.64.2 0.54.2 1.44.2 1.54.2 1.64.2 1.84.2 1.94.25 24.25 2.254.3 14.3 1.34.3 1.44.3 1.54.3 1.84.3 2.44.34 3.534.4 1.14.4 1.64.4 1.84.42 2.624.47 1.024.47 1.274.47 1.874.48 1.784.5 0.754.5 0.84.5 14.5 1.24.5 1.324.5 1.54.5 1.74.5 1.754.5 1.84.5 1.94.5 2

4.5 2.254.5 2.44.5 2.54.5 2.654.5 34.5 3.54.5 54.57 1.024.6 1.24.6 1.84.6 1.854.6 24.6 2.34.6 2.44.6 2.54.6 3.24.7 0.794.7 0.94.7 14.7 1.24.7 1.424.7 1.54.7 1.64.7 1.784.7 1.94.7 2.74.7 34.75 14.75 1.244.75 1.274.75 1.54.75 2.624.76 1.784.8 0.814.8 1.34.8 1.354.8 1.54.8 1.84.8 1.94.87 1.784.87 1.84.87 3.534.9 1.34.9 1.54.9 1.94.9 1.954.9 2.624.93 1.54.95 1.285 0.85 15 1.25 1.255 1.355 1.45 1.55 1.65 1.755 1.85 1.95 25 2.25 2.35 2.55 2.655 35 3.55 4

29

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

5 55 5.55 65 85.1 15.1 1.15.1 1.65.1 1.85.15 1.85.2 0.65.2 1.75.23 2.625.28 1.785.3 1.275.3 1.55.3 1.75.3 1.755.3 1.85.3 25.3 2.25.3 2.45.3 2.55.3 2.655.3 4.35.3 55.37 1.75.37 1.785.41 1.025.49 1.355.5 15.5 1.255.5 1.35.5 1.55.5 1.65.5 1.85.5 25.5 2.35.5 2.45.5 2.55.5 35.5 3.55.51 1.245.56 1.595.59 3.055.6 15.6 1.25.6 1.75.6 1.85.6 25.6 2.35.6 2.45.6 2.55.64 2.625.67 1.785.69 2.185.7 15.7 1.25.7 1.45.7 1.785.7 1.95.7 2.155.74 1.025.75 15.75 2.155.79 1.025.8 1.55.8 1.65.8 1.78

5.8 1.95.8 2.65.82 1.25.88 2.625.9 0.95.9 1.85.9 2.055.9 2.555.94 3.536 0.756 16 1.16 1.26 1.36 1.46 1.56 1.66 1.76 1.756 1.86 1.96 26 2.16 2.26 2.36 2.46 2.56 2.66 2.656 2.76 2.756 2.86 36 3.26 3.56 3.756 46 4.56 56 5.26 5.56 66 6.56 76.02 2.626.03 1.886.07 0.766.07 1.026.07 1.36.07 1.636.07 1.786.07 1.886.1 1.66.1 1.86.14 1.786.15 16.17 1.726.2 16.2 1.746.2 1.86.2 1.836.2 1.96.2 26.2 36.2 4.16.3 0.66.3 1.56.3 1.6

6.3 1.86.3 26.3 2.396.3 2.46.3 2.66.3 4.86.35 0.816.35 0.896.35 16.35 1.66.35 1.786.35 2.036.35 3.286.36 1.586.4 1.36.4 1.86.4 1.96.4 2.56.5 16.5 1.16.5 1.256.5 1.56.5 1.556.5 1.66.5 1.96.5 26.5 2.086.5 2.26.5 2.56.5 36.5 3.26.5 3.56.5 46.5 4.756.5 56.55 16.55 1.16.55 1.556.55 3.76.6 2.46.7 1.46.7 1.56.7 1.86.7 1.96.7 26.71 2.016.75 1.786.8 1.36.8 1.66.8 1.856.8 1.96.8 26.8 2.26.8 2.46.8 2.626.85 1.16.86 1.786.9 1.86.9 2.656.9 3.56.97 3.536.97 3.577 0.67 17 1.27 1.37 1.357 1.4

7 1.57 1.587 1.67 1.77 1.87 27 2.27 2.37 2.57 2.77 37 3.57 47 4.57 57 5.57 67 127.01 1.197.06 1.177.1 1.57.1 1.67.1 1.87.14 3.577.2 17.2 1.37.2 1.787.2 1.97.2 2.27.2 2.47.2 4.97.24 2.447.28 1.787.3 1.27.3 1.787.3 2.27.3 2.47.3 2.77.3 3.27.37 1.147.4 27.4 37.44 0.997.5 0.87.5 17.5 1.27.5 1.277.5 1.37.5 1.57.5 1.67.5 1.77.5 1.787.5 1.87.5 1.857.5 1.97.5 27.5 2.27.5 2.37.5 2.47.5 2.57.5 2.87.5 37.5 3.57.5 57.52 3.537.59 2.627.6 1.27.6 1.3

7.6 1.57.6 1.67.6 1.87.6 1.97.6 27.6 2.47.6 2.627.6 37.6 47.62 1.277.64 1.637.65 1.637.65 1.687.65 2.627.65 2.657.66 1.787.66 2.47.7 0.87.7 1.57.7 1.97.7 27.75 2.627.8 1.257.8 1.67.8 1.757.8 1.87.8 1.97.8 27.8 2.57.8 57.87 1.377.9 0.517.9 0.797.9 0.87.9 1.257.9 1.67.9 1.87.9 2.17.9 2.37.9 2.57.9 4.77.92 2.627.94 1.787.94 4.768 0.68 18 1.18 1.28 1.258 1.58 1.68 1.648 1.78 1.758 1.88 1.98 28 2.028 2.18 2.28 2.48 2.58 2.68 2.628 2.88 38 3.38 3.5

8 3.78 48 4.28 4.58 58 68 88.04 18.1 1.68.1 2.18.13 1.788.2 1.658.2 1.98.2 28.28 1.38.3 18.3 2.48.32 1.788.38 1.278.4 1.88.4 2.58.43 0.798.45 2.158.48 1.788.5 18.5 1.278.5 1.358.5 1.58.5 1.68.5 1.88.5 1.98.5 28.5 2.58.5 38.5 3.58.5 48.51 0.98.51 1.788.55 2.18.56 2.628.6 1.68.6 2.48.6 38.6 3.38.64 2.038.65 1.788.66 1.058.7 1.658.7 28.7 2.98.73 1.788.76 1.88.8 1.48.8 1.98.8 2.48.8 2.78.8 3.28.9 1.58.9 1.68.9 1.88.9 1.98.9 2.68.9 2.78.92 1.839 0.89 19 1.29 1.4

30

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

9 1.59 1.69 1.659 1.89 1.859 29 2.29 2.259 2.39 2.59 2.69 2.659 2.759 2.99 39 3.29 3.59 49 4.59 59 5.59 69 109.02 1.789.1 1.69.1 1.659.12 1.79.12 3.539.13 2.629.19 1.789.19 2.629.2 19.2 1.19.2 1.69.2 1.99.2 29.2 2.659.2 3.59.24 1.529.25 1.789.25 1.839.25 1.869.25 2.629.3 1.59.3 29.3 2.29.3 2.49.3 39.4 19.4 1.029.4 1.99.4 2.19.4 2.39.5 0.89.5 19.5 1.39.5 1.49.5 1.59.5 1.69.5 1.79.5 1.89.5 1.99.5 29.5 2.19.5 2.29.5 2.49.5 2.59.5 2.62

9.5 2.759.5 2.89.5 2.99.5 39.5 3.29.5 3.59.5 4.59.5 59.5 69.5 6.79.52 1.789.52 2.619.53 1.149.6 1.69.6 29.6 2.39.6 2.49.6 2.59.6 2.959.6 4.89.65 0.669.66 1.789.7 19.7 1.279.7 1.39.75 1.789.75 2.359.75 2.59.8 0.569.8 19.8 1.59.8 1.69.8 1.79.8 1.99.8 2.49.8 2.79.8 2.89.8 39.83 1.859.88 0.569.9 1.89.9 1.99.9 2.49.9 2.69.92 1.839.92 1.99.92 2.6210 0.610 110 1.2510 1.310 1.410 1.510 1.610 1.7810 1.810 1.910 210 2.110 2.210 2.410 2.510 2.610 2.6510 2.710 2.810 310 3.1

10 3.310 3.510 410 4.510 510 610 6.510 710 810 1010.1 110.1 1.610.1 1.710.1 1.7510.1 1.810.15 2.3410.16 1.5710.2 2.410.2 2.510.28 2.6610.3 1.210.3 1.710.3 2.0510.3 2.410.3 310.32 1.7810.35 1.9210.4 110.4 2.210.4 2.510.4 2.810.4 410.45 210.46 5.3310.5 110.5 1.510.5 1.7510.5 1.810.5 1.8310.5 1.910.5 210.5 2.2510.5 2.310.5 2.410.5 2.510.5 2.610.5 2.710.5 310.5 3.2510.5 3.510.5 4.510.5 5.910.52 1.8310.57 1.510.6 110.6 1.310.6 1.810.6 210.6 2.310.6 2.410.6 2.610.6 2.6510.6 4.510.6 6.710.64 1.1210.69 3.5310.7 1.110.77 2.95

10.78 2.6210.8 1.210.8 1.310.8 1.510.8 1.610.8 1.710.8 1.7510.8 1.810.8 1.910.8 210.8 2.210.8 2.410.8 2.610.8 2.6510.8 2.7510.8 2.810.8 310.82 1.2810.82 1.7810.85 2.7510.9 1.2510.9 2.0311 0.711 111 1.211 1.2511 1.311 1.511 1.611 1.7511 1.811 1.8511 1.911 211 2.211 2.2511 2.311 2.411 2.511 2.7511 2.811 311 3.211 3.511 411 4.511 511 5.211 5.311 5.511 611 711 811.08 1.811.1 1.211.1 1.611.1 2.311.1 5.511.11 1.5911.11 1.7811.11 2.3811.18 1.2711.2 1.311.2 1.811.2 1.911.2 2.211.2 2.311.2 2.5

11.2 2.7511.2 4.311.2 7.611.3 1.211.3 1.311.3 1.611.3 1.7511.3 211.3 2.211.3 2.411.3 2.511.3 2.711.4 1.711.4 2.111.4 4.411.5 111.5 1.2511.5 1.311.5 1.511.5 1.611.5 1.7811.5 1.911.5 211.5 2.111.5 2.211.5 2.411.5 2.511.5 2.711.5 2.811.5 311.5 3.511.5 411.6 1.211.6 1.611.6 1.711.6 1.7811.6 2.311.6 2.411.6 2.511.6 2.811.6 2.911.6 2.9511.6 6.3511.64 1.7811.7 2.311.7 2.6211.7 2.711.7 3.511.7 5.811.77 3.1511.8 1.511.8 1.811.8 1.911.8 2.111.8 2.311.8 2.411.8 2.511.8 2.6511.8 2.811.8 311.8 3.5311.8 1011.84 2.411.89 1.9811.9 1.7811.9 2.6311.91 2.6211.99 0.81

12 112 1.212 1.512 1.612 1.712 1.7512 1.812 1.8512 1.912 212 2.2512 2.412 2.512 2.712 2.7512 2.812 312 3.0512 3.212 3.2512 3.312 3.512 3.812 412 4.512 512 5.512 612 712 812 912 1012.07 5.3312.1 1.312.1 1.612.1 1.712.1 1.812.1 1.912.1 2.112.1 2.212.1 2.3512.1 2.412.1 2.712.17 1.2712.2 1.312.2 1.712.2 1.912.2 2.512.2 2.812.2 3.212.2 4.412.25 2.812.29 3.5312.3 112.3 2.412.3 2.512.37 2.6212.37 2.7612.4 112.4 1.912.4 212.4 2.1812.4 2.612.4 2.712.42 1.7812.45 1.0212.47 1.7812.5 1

31

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

12.5 1.112.5 1.512.5 1.712.5 1.7512.5 1.812.5 212.5 2.212.5 2.2512.5 2.512.5 2.612.5 2.6512.5 2.7512.5 312.5 3.212.5 3.512.5 4.212.5 812.6 2.412.6 2.512.6 2.712.6 3.2512.6 3.512.6 3.612.64 1.7812.65 2.7712.7 1.612.7 1.712.7 1.812.7 212.7 2.6212.7 2.812.7 3.1812.7 3.212.7 4.9612.72 2.6212.73 1.5712.73 1.6312.78 6.0512.8 1.612.8 1.812.8 2.412.8 2.812.8 3.212.8 4.512.9 1.2412.9 9.912.95 0.8613 113 1.213 1.2513 1.313 1.413 1.513 1.613 1.713 213 2.1513 2.3513 2.413 2.513 2.613 2.713 2.7513 2.813 313 3.213 3.2813 3.5

13 3.613 3.813 413 4.513 513 5.513 613 813.1 1.613.1 2.6213.1 3.1813.2 1.613.2 1.7813.2 1.813.2 1.913.2 2.513.2 2.6513.23 1.7813.3 1.813.3 2.213.3 2.413.3 3.813.34 1.3213.34 1.3413.34 1.813.4 1.913.4 2.113.4 2.713.4 2.813.44 2.113.44 2.513.44 2.6213.46 2.0813.5 113.5 1.313.5 1.513.5 1.613.5 1.8713.5 213.5 2.113.5 2.413.5 2.513.5 2.613.5 2.713.5 2.7513.5 313.5 3.513.5 4.2513.5 513.54 3.613.6 1.613.6 213.6 2.213.6 2.313.6 2.413.6 2.513.6 2.713.6 2.7513.6 2.813.6 313.6 3.613.64 5.3313.65 2.6213.7 2.913.7 4.1513.8 1.913.8 213.8 2.4

13.8 2.5413.8 313.8 613.85 1.5213.87 1.713.87 3.5313.9 2.313.9 2.413.94 3.613.95 2.6213.95 2.6513.95 2.7214 0.4114 0.5514 114 1.114 1.214 1.2514 1.314 1.414 1.514 1.614 1.7814 1.814 1.914 214 2.0814 2.114 2.214 2.314 2.414 2.514 2.614 2.6514 2.714 2.7514 2.814 2.914 314 3.1514 3.214 3.514 3.5514 3.914 414 4.514 514 5.314 614 6.514 714 7.514 814 1014.01 2.6214.1 114.1 1.614.1 2.214.1 2.514.12 2.6214.2 1.214.2 1.914.2 2.814.2 314.2 5.514.27 1.5914.27 6.3514.3 0.76

14.3 1.7514.3 214.3 2.414.3 3.514.3 414.4 114.4 1.814.4 214.43 1.7814.5 114.5 1.514.5 1.614.5 1.6514.5 1.814.5 214.5 2.414.5 2.514.5 314.5 3.514.5 414.5 4.514.5 514.5 5.714.5 5.814.6 2.414.6 2.4814.6 2.614.6 2.9514.6 3.214.61 2.5214.61 3.2814.63 3.5314.65 214.68 1.0214.7 1.414.7 1.5714.8 1.514.8 2.414.81 1.0214.82 1.7814.85 1.514.87 3.5314.9 2.4514.94 2.9215 115 1.215 1.2515 1.315 1.515 1.615 1.7815 1.815 1.8215 215 2.1515 2.2515 2.415 2.515 2.615 2.6515 2.715 2.915 315 3.215 3.515 3.5515 3.815 4

15 4.2515 4.515 515 5.515 5.615 615 715 815 915 1015 12.515.08 1.7815.08 2.6215.1 1.615.1 2.615.1 2.715.2 1.7815.2 1.815.2 2.815.2 415.22 2.6215.24 1.3315.24 5.3315.3 1.7815.3 215.3 2.315.3 2.415.3 4.315.39 0.7615.4 115.4 1.515.4 2.115.4 315.47 3.5315.5 115.5 1.2515.5 1.515.5 1.5515.5 1.7515.5 1.915.5 215.5 2.315.5 2.415.5 2.515.5 315.5 3.115.5 3.2515.5 3.515.5 3.815.5 415.5 4.215.5 4.315.5 4.515.5 5.315.54 2.6215.54 2.8215.55 2.6515.6 1.7815.6 1.9615.6 215.6 2.315.6 2.415.6 2.515.6 2.615.6 2.9515.6 315.6 3.2515.6 3.4

15.7 1.315.7 2.715.7 2.915.8 1.815.8 2.415.8 4.115.85 2.415.88 1.7815.88 2.3615.88 2.6215.88 3.9615.9 2.315.9 2.415.9 2.5515.9 2.716 0.916 116 1.216 1.2516 1.516 1.616 1.716 1.7816 1.816 1.916 216 2.116 2.216 2.2516 2.316 2.416 2.516 2.616 2.6516 2.716 2.816 316 3.1516 3.516 3.5516 416 4.2516 4.516 4.7516 516 5.516 5.616 616 716 816 1016 1216.03 1.5716.1 1.616.1 1.816.1 2.2516.1 2.316.1 2.6216.1 316.1 3.516.2 1.1516.2 2.2516.3 2.416.3 2.516.3 2.616.33 0.7916.36 2.216.36 2.21

32

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

16.4 1.316.4 1.7816.4 2.216.5 116.5 1.516.5 216.5 2.2516.5 2.516.5 316.5 3.516.5 916.55 2.1316.56 1.7816.6 116.6 1.7816.6 2.416.66 3.5316.7 1.4516.7 2.516.75 1.7816.79 116.8 2.216.8 2.416.8 2.816.81 5.3316.9 2.716.9 2.7517 117 1.117 1.217 1.317 1.517 1.617 1.7817 1.817 217 2.217 2.417 2.517 2.6517 2.717 2.817 2.917 317 3.217 3.2517 3.3517 3.517 3.5517 3.817 417 4.217 4.517 517 5.3317 5.517 617 6.517 717 817 1017 1217.04 3.5317.1 1.317.1 1.5817.1 1.617.12 1.1417.12 2.62

17.13 2.6217.13 2.7917.16 1.7817.2 117.2 1.517.2 1.617.2 1.917.2 2.6217.2 317.2 5.717.25 1.217.25 317.27 4.0117.3 117.3 1.7517.3 2.217.3 2.417.3 417.35 1.517.37 4.3417.4 1.617.4 2.117.4 2.517.4 2.5517.4 2.817.4 3.5317.46 1.5917.46 2.6217.5 117.5 1.317.5 1.517.5 1.617.5 1.817.5 217.5 2.417.5 2.517.5 2.617.5 2.717.5 317.5 3.1517.5 3.2517.5 3.517.5 417.5 4.217.5 6.2517.5 917.6 117.6 1.8317.6 2.417.61 2.6217.69 2.6217.7 117.7 1.317.74 1.7817.8 1.517.8 1.817.8 2.417.8 2.617.8 317.8 1017.86 2.6217.86 2.7617.86 3.617.9 1.317.9 2.617.9 2.817.93 1.7817.93 1.8

17.93 2.4617.96 2.6218 118 1.1518 1.318 1.518 1.6518 1.818 218 2.218 2.318 2.518 2.6518 2.7518 2.818 318 3.1518 3.518 3.5518 3.718 418 4.218 4.518 518 5.218 5.7518 618 6.518 718 818 8.518 918 9.518 1118.1 1.618.2 1.618.2 1.718.2 1.918.2 2.618.2 2.718.2 318.2 3.518.2 3.818.27 2.618.3 1.0218.3 2.418.3 2.618.3 318.3 3.618.4 1.7818.4 2.718.4 2.818.42 1.0218.42 5.3318.45 4.4518.5 118.5 1.218.5 1.518.5 1.618.5 1.718.5 1.818.5 218.5 2.218.5 2.518.5 318.5 3.518.5 3.718.5 4.5

18.5 5.318.52 3.7518.6 1.318.6 1.818.6 2.318.6 2.418.6 2.718.64 3.5318.7 1.318.7 1.918.7 318.72 2.6218.72 2.8218.72 3.1518.77 1.7818.77 1.8518.8 1.8518.8 218.8 2.418.8 318.9 1.718.9 319 119 1.319 1.519 1.619 1.719 1.7519 1.7819 1.819 219 2.219 2.319 2.419 2.519 2.619 2.6519 2.719 2.7519 319 3.1519 3.219 3.3519 3.419 3.519 3.5519 3.619 419 4.519 519 5.519 619 6.519 6.819 719 819 919 1019.05 0.8919.05 1.7819.05 2.6219.05 2.6919.05 6.3519.1 1.619.1 1.7819.1 2.419.17 1.7819.18 2.46

19.2 219.2 2.319.2 2.419.2 2.519.2 2.6219.2 319.2 3.419.2 419.25 1.7819.3 1.519.3 1.7819.3 2.219.3 2.419.3 3.519.3 4.519.3 4.619.4 1.319.4 2.119.4 2.419.4 2.619.4 4.6519.4 1419.45 819.46 2.0319.5 119.5 1.519.5 1.7819.5 1.819.5 219.5 2.419.5 2.519.5 2.819.5 319.5 3.2519.5 3.519.5 419.5 5.319.5 619.5 819.5 8.419.51 2.0319.6 2.319.6 2.419.6 319.6 3.5319.6 419.6 4.819.7 1.519.7 1.719.7 219.7 2.5519.7 3.519.7 3.619.75 819.8 1.319.8 1.7819.8 1.9819.8 2.319.8 2.419.8 3.219.8 3.619.84 2.3919.9 2.619.99 5.3320 120 1.220 1.320 1.4

20 1.520 1.620 1.720 1.7820 1.820 220 2.220 2.420 2.4220 2.520 2.6220 2.6520 2.720 2.820 320 3.1520 3.2520 3.320 3.520 3.5520 3.620 420 4.1520 4.320 4.420 4.520 520 5.2520 5.3320 5.520 5.720 620 6.520 720 7.520 820 1020 1220.07 0.920.1 1.620.12 220.15 2.4520.2 1.7820.2 2.520.2 2.720.2 320.2 5.320.2 620.22 3.5320.22 4.0420.24 1.7820.29 2.6220.3 2.420.3 320.35 1.7820.4 2.520.5 120.5 1.520.5 1.820.5 220.5 2.420.5 2.520.5 2.620.5 320.5 3.220.5 420.5 520.5 5.75

33

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

20.5 7.520.6 1.520.6 1.920.6 2.320.6 2.420.63 2.6220.65 5.3320.72 2.6220.75 3.5320.8 1.520.8 1.7820.8 1.920.8 2.420.8 2.720.8 2.820.8 420.9 1.520.9 5.720.96 3.2821 121 1.521 1.7521 221 2.221 2.421 2.521 2.7521 321 3.1721 3.521 421 4.521 521 621 6.521 721 821 8.521 1021 1221.1 1.8521.1 1.921.1 2.521.2 1.421.2 1.7821.2 1.821.2 1.921.2 2.221.2 2.421.2 2.521.2 2.6521.2 321.2 3.221.2 3.321.2 3.5521.2 3.621.2 421.2 4.921.25 2.0521.3 121.3 1.621.3 1.821.3 2.421.3 3.521.3 3.5321.3 3.621.3 3.9521.35 3

21.4 1.621.4 2.421.49 2.0121.5 121.5 1.221.5 1.521.5 1.721.5 221.5 2.221.5 2.421.5 2.521.5 2.7521.5 321.5 3.521.5 3.921.5 421.5 4.521.5 521.5 7.221.59 5.3321.6 1.7821.6 221.6 2.421.65 3.6521.7 121.7 3.521.75 3.921.8 1.521.8 2.421.8 321.8 3.521.82 3.1521.82 3.5321.82 3.7121.82 4.221.89 2.6221.92 2.9521.95 1.7821.95 222 122 1.122 1.222 1.322 1.422 1.522 1.722 1.7822 1.822 222 2.1522 2.222 2.322 2.422 2.522 2.6222 2.722 322 3.222 3.522 3.622 3.722 422 4.522 522 5.522 622 6.522 6.75

22 722 7.522 7.822 822 922 1022 1122 11.522.05 1.522.05 1.622.08 0.822.1 1.622.1 222.1 3.522.16 5.3522.2 1.822.2 222.2 322.2 3.122.2 3.222.2 3.622.2 4.722.22 2.6222.22 3.522.22 4.3222.23 3.9622.23 6.3522.26 6.3322.3 2.422.3 2.4822.3 2.522.3 322.33 1.0222.4 1.522.4 1.822.4 2.522.4 2.6522.4 3.1522.4 3.222.4 3.5522.4 522.42 1.7822.5 122.5 1.4 22.5 1.522.5 222.5 2.422.5 2.522.5 2.7522.5 2.822.5 322.5 3.122.5 3.2522.5 3.522.5 3.722.5 422.5 4.522.5 522.5 722.53 3.2822.6 1.122.6 1.822.6 3.222.67 1.7822.7 1.522.7 1.7822.7 2.3

22.7 2.622.7 2.822.8 0.822.8 1.522.8 3.1522.8 5.322.89 123 123 1.223 1.523 1.7523 223 2.323 2.423 2.523 2.723 2.923 323 3.223 3.2323 3.523 3.623 423 4.3323 4.523 523 5.323 5.523 623 6.523 723 8 23 923 1023 1123 12.523 1323 1623.17 5.3323.2 3.5323.3 223.3 2.423.3 2.923.3 323.3 5.323.35 1.7823.4 1.623.4 2.323.4 2.723.4 3.5323.4 4.2723.4 5.823.4 5.9923.47 2.6223.47 2.9523.47 2.9623.5 123.5 1.523.5 1.7823.5 223.5 2.323.5 2.423.5 2.523.5 2.5523.5 2.723.5 323.5 3.5

23.5 3.7223.5 423.5 523.5 5.2523.5 623.5 6.523.5 7.2523.5 8.423.52 1.8323.53 1.7823.55 0.7123.59 123.6 1.0223.6 1.723.6 1.823.6 223.6 2.523.6 2.6523.6 3.1523.6 3.2 23.6 3.523.6 3.5523.7 1.5823.7 1.7823.7 1.923.7 2.3823.7 3.523.74 0.6123.75 3.5323.75 523.79 6.3523.8 1.323.8 1.623.8 3.523.81 1.7823.81 2.6223.9 523.95 3.5323.99 2.6224 124 1.124 1.224 1.324 1.524 1.624 1.724 1.7824 224 2.124 2.224 2.2524 2.324 2.424 2.524 2.724 2.824 324 3.1524 3.524 3.624 3.824 424 4.524 4.824 524 5.524 6

24 6.524 724 824 924 1024 12.524 1324.1 1.624.18 1.724.2 1.7824.2 2.424.2 2.524.2 324.2 3.324.2 3.524.2 4.124.2 5.724.28 1.8524.3 2.424.4 324.4 3.124.4 3.224.4 3.524.45 1.224.5 124.5 1.524.5 1.824.5 224.5 2.424.5 2.524.5 2.724.5 2.824.5 324.5 3.624.5 3.6524.5 424.5 4.524.5 5.2524.5 5.524.5 624.6 1.824.6 2.424.6 2.924.6 324.6 3.1524.6 3.424.6 3.524.6 3.624.64 2.6224.66 1.7824.7 1.724.7 2.6724.7 324.7 3.524.76 2.6224.77 524.77 5.3324.8 124.8 1.524.8 1.924.8 2.224.8 3.424.8 5.524.8 624.8 724.9 3.624.9 3.824.99 1.27

34

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

24.99 3.5325 125 1.225 1.325 1.525 1.625 1.725 1.7625 1.825 225 2.225 2.325 2.425 2.525 2.625 2.6525 325 3.1525 3.225 3.325 3.525 3.5525 3.625 3.725 425 4.1525 4.325 4.525 525 5.3325 5.525 5.725 625 6.525 725 7.525 825 925 1025 1225 1325 1425 1525 15.525.04 2.9525.07 2.6225.1 1.625.12 1.7825.12 225.12 2.0325.2 1.225.2 1.725.2 1.825.2 2.325.2 2.525.2 2.925.2 325.2 3.225.2 3.525.25 2.825.3 1.625.3 2.425.3 2.625.3 325.4 1.525.4 1.5825.4 2.525.4 3.17

25.4 3.1825.4 3.525.4 3.5325.4 425.4 6.3525.5 125.5 1.225.5 1.625.5 1.7825.5 1.825.5 225.5 2.525.5 325.5 3.225.5 3.525.5 3.725.5 4.525.5 525.5 5.525.6 1.7825.6 5.4925.67 1.7825.7 1.525.7 1.925.7 3.525.8 1.825.8 2.6525.8 3.225.8 3.5325.8 3.5525.8 6.925.9 4.826 126 1.226 1.326 1.3726 1.526 1.626 1.7826 226 2.126 2.1526 2.226 2.326 2.426 2.526 2.626 326 3.226 3.526 3.626 3.6726 3.726 426 4.526 526 5.526 626 6.526 726 826 8.7526 926 1026 1226.07 2.6226.2 2.326.2 3

26.2 3.626.25 2.3526.3 226.3 2.426.33 226.34 5.3326.4 5.226.5 126.5 1.226.5 1.526.5 1.726.5 1.826.5 226.5 2.326.5 2.526.5 2.6526.5 326.5 3.1526.5 3.2526.5 3.526.5 3.5526.5 426.5 826.57 326.58 3.5326.59 2.9526.6 2.226.6 2.426.6 3.526.64 2.6226.7 1.7826.7 2.526.77 2.126.8 1.626.8 2.526.8 326.8 426.9 1.526.9 227 127 1.1527 1.327 1.527 1.7827 227 2.227 2.527 2.727 327 3.227 3.527 427 4.527 527 5.2527 5.3327 5.527 627 6.527 727 827 1227 1327 1627.1 127.1 1.627.2 5.727.28 3.53

27.3 2.427.3 2.527.3 2.727.3 3.227.31 3.2827.38 0.7627.4 2.527.4 2.727.4 327.4 3.5327.4 427.43 4.5727.5 127.5 1.127.5 1.2527.5 1.527.5 227.5 2.327.5 2.427.5 2.527.5 2.727.5 327.5 3.227.5 427.5 4.527.5 627.5 6.827.5 7.527.56 3.1727.58 1.727.6 1.7827.6 2.227.6 2.427.6 627.7 2.427.7 2.727.7 3.427.7 3.527.8 1.527.8 1.7827.8 227.8 2.6227.8 327.8 3.227.8 3.527.8 3.5327.8 3.627.8 527.8 827.93 5.3328 128 1.328 1.528 1.628 1.728 1.828 1.928 228 2.228 2.328 2.528 2.6228 2.6528 2.828 328 3.1528 3.228 3.25

28 3.428 3.528 3.5528 3.6528 3.728 428 4.128 4.328 4.428 4.528 4.7528 528 5.328 5.528 628 6.528 728 828 8.528 8.7528 1028 1128 1228.1 2.6228.1 4.328.15 3.228.17 3.5328.17 3.7328.2 128.2 328.2 5.328.25 2.6228.3 128.3 1.628.3 1.7828.3 1.828.3 228.3 2.428.3 2.728.3 3.128.3 3.5528.4 328.42 2.6228.45 3.1828.5 128.5 1.528.5 1.828.5 228.5 2.528.5 328.5 3.328.5 3.528.5 428.5 4.2528.5 4.528.56 2.3828.6 1.628.6 2.228.6 3.528.7 3.528.75 3.5328.8 2.528.8 3.228.8 3.5328.87 1.7828.88 3.2828.9 328.9 3.1

28.9 3.629 129 1.529 1.7829 1.829 229 2.529 329 3.1529 3.329 3.529 429 4.529 529 629 829 8.329 8.529 1029 1629.1 1.629.1 2.5529.1 329.2 2.6229.2 329.2 3.329.2 3.529.2 4.729.25 1.629.28 2.829.3 129.3 1.7829.3 2.6229.3 3.629.4 129.4 329.4 3.129.45 4.3929.5 129.5 1.229.5 1.529.5 229.5 2.329.5 2.529.5 2.729.5 329.5 3.1529.5 3.529.5 3.629.5 4.529.5 529.5 5.729.5 8.529.51 5.3329.6 2.429.69 1.1429.7 129.7 2.729.7 2.829.7 329.7 3.529.74 2.9529.75 129.75 3.5329.8 129.8 3.229.8 4.529.82 2.62

35

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

29.87 1.5229.87 1.7829.9 129.9 3.5329.92 2.6230 130 1.230 1.530 1.830 1.8230 230 2.230 2.330 2.430 2.530 2.6530 2.730 2.830 330 3.130 3.1530 3.230 3.530 3.5530 3.630 3.730 430 4.330 4.430 4.530 4.830 530 5.3330 5.530 5.730 5.830 630 6.530 730 7.530 830 930 1030 1130 1230 1330 17.530.1 2.6230.16 2.3830.2 130.2 330.2 3.630.23 1.2730.3 2.430.3 5.730.35 3.630.43 1.7830.5 130.5 1.530.5 230.5 2.530.5 330.5 530.5 730.5 1530.6 130.7 3.530.75 1

30.8 1.7830.8 2.530.8 3.5330.8 3.630.8 3.730.8 4.530.81 3.7830.95 2.6431 1.531 1.731 231 2.131 2.231 2.531 331 3.531 3.731 3.831 431 4.531 4.731 531 5.331 5.531 631 6.431 6.531 831 931 9.531 1031 1231 1431 1531 18.531.1 0.831.1 1.431.12 5.3331.14 0.7931.2 2.431.2 331.2 3.531.2 4.731.3 231.3 3.531.34 1.9831.34 3.5331.4 531.42 1.531.42 1.7831.42 2.631.42 2.6231.42 2.831.47 1.7831.5 1.231.5 1.531.5 1.7531.5 1.831.5 1.9531.5 231.5 2.531.5 2.6531.5 331.5 3.1531.5 3.331.5 3.531.5 3.5531.5 3.65

31.5 431.5 4.531.5 531.5 5.331.5 631.5 6.531.6 1.3231.6 1.631.6 2.431.63 231.7 3.231.7 3.531.74 1.7831.75 1.5731.75 1.631.75 2.0331.75 3.1731.75 6.3531.8 131.8 1.431.8 1.531.8 1.631.8 3.231.8 3.532 132 1.132 1.2532 1.332 1.532 1.632 1.7832 1.832 232 2.232 2.332 2.432 2.532 2.632 2.732 2.832 332 3.232 3.532 3.5332 3.632 432 4.232 4.532 532 5.532 5.732 632 6.232 6.532 732 832 932 1032 1232 13.532 1432 1632.05 1.5532.1 1.632.11 3.4532.15 3.5332.2 1.432.2 2.5

32.2 332.2 432.21 1.7832.3 232.3 5.732.4 2.132.4 332.5 1.532.5 1.732.5 1.832.5 232.5 2.232.5 2.432.5 2.532.5 2.632.5 2.6532.5 2.8532.5 332.5 3.532.5 3.5532.5 3.632.5 432.5 532.5 5.732.6 1.232.6 1.832.6 2.432.69 5.3332.7 1.332.7 1.532.7 332.7 5.3332.7 6.532.9 5.332.92 3.5332.92 5.3332.92 5.5333 133 1.233 1.533 1.7833 233 2.533 2.6233 2.833 333 3.533 433 4.533 533 5.233 5.733 633 6.533 733 7.533 833 933 1033 1233 1433.05 1.7833.12 1.5233.12 3.5333.2 1.333.2 2.433.2 3.533.21 3.53

33.27 1.5833.27 1.7833.3 1.333.3 233.3 2.433.3 2.633.3 433.32 3.5333.34 2.3833.4 233.4 333.5 133.5 1.533.5 1.633.5 1.833.5 233.5 2.533.5 2.6533.5 2.833.5 333.5 3.1533.5 3.533.5 3.5533.5 433.5 4.633.5 533.5 5.233.5 633.5 733.5 1333.55 3.7133.6 1.7833.6 2.733.6 433.6 633.7 233.7 2.233.7 333.7 3.533.7 3.733.71 3.5333.77 2.6533.99 2.3434 134 1.134 1.234 1.434 1.534 1.634 1.734 1.7534 1.934 234 2.134 2.1634 2.334 2.434 2.534 2.634 334 3.234 3.2534 3.534 3.634 3.7534 3.834 434 4.1

34 4.534 4.734 534 5.534 5.7534 634 734 7.534 834 1034 1134 1234.1 334.1 3.634.2 234.2 2.334.2 2.834.2 334.2 3.334.29 1.1934.29 5.3334.3 2.534.3 4.634.3 534.4 3.134.42 2.9534.5 134.5 1.534.5 1.734.5 1.834.5 234.5 2.3534.5 2.434.5 2.534.5 2.6534.5 334.5 3.534.5 3.5534.5 3.6534.5 3.734.5 434.5 4.534.5 534.5 5.534.5 734.52 3.5334.57 1.2534.59 2.6234.6 1.7834.6 2.434.6 2.634.6 434.62 234.65 1.7834.7 2.834.7 3.534.7 4.334.8 335 135 1.235 1.2535 1.535 1.935 235 2.135 2.1535 2.235 2.5

36

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

35 2.635 2.835 335 3.135 3.235 3.335 3.535 3.635 435 4.2535 4.535 535 5.335 5.3335 635 735 835 935 1035 1235 1535 2135.1 135.1 1.635.2 135.2 2.435.2 2.535.2 2.6235.2 335.2 3.535.2 435.2 535.2 5.735.3 2.435.3 2.535.3 4.535.3 4.935.31 2.6235.4 2.235.4 335.4 3.135.4 3.235.4 3.2535.5 135.5 1.535.5 1.7835.5 1.835.5 235.5 2.535.5 2.6535.5 335.5 3.1535.5 3.5535.5 435.5 4.535.5 6.435.5 11.535.5 16.535.52 2.5335.6 3.635.7 2.6235.7 3.535.76 1.0235.8 135.97 1.7836 136 1.336 1.5

36 1.7836 1.836 236 2.236 2.336 2.536 2.736 336 3.236 3.536 3.5336 3.836 436 4.536 4.636 536 5.3736 5.536 5.736 636 6.536 736 836 936 1036 1136.07 1.7836.1 3.5336.17 1.0236.17 1.7836.17 2.3836.17 2.6236.2 1.5236.2 1.5736.2 1.836.2 236.2 2.436.2 2.636.2 2.6536.2 336.2 3.736.2 5.736.25 1.1436.27 1.7836.36 2.6236.4 3.836.5 136.5 1.536.5 1.836.5 236.5 2.536.5 2.6536.5 336.5 3.536.5 3.5536.5 3.7536.5 636.51 6.9936.6 1.636.6 2.236.6 2.536.6 336.7 236.8 136.8 1.236.8 336.83 3.2836.9 1.2

36.9 5.336.91 1.1937 137 1.237 1.537 1.837 237 2.437 2.537 2.637 337 3.537 3.637 437 4.537 537 5.337 5.537 637 837 1037.1 137.1 1.637.1 1.837.1 2.137.1 2.6237.2 2.537.2 337.2 3.5337.2 3.637.2 4.137.2 5.737.21 2.6237.3 1.537.3 3.537.3 3.637.4 4.537.42 337.46 337.47 337.47 5.3337.5 1.2537.5 1.537.5 237.5 2.537.5 2.6537.5 337.5 3.1537.5 3.537.5 3.5537.5 437.5 4.537.5 5.337.6 1.237.6 2.437.6 4.537.69 3.5337.7 337.7 3.537.7 437.7 5.337.7 5.5337.77 2.6237.8 237.8 2.3837.82 1.637.82 1.7837.82 2

37.9 3.5138 138 1.238 1.538 1.738 1.838 238 2.438 2.538 2.638 2.738 338 3.538 3.638 438 4.538 538 5.238 5.338 5.538 638 6.538 738 7.138 838 938 1038 1238 2038.1 1.3538.1 1.5938.1 3.1838.1 6.3538.1 11.138.12 2.3938.2 238.2 3.638.2 4.738.2 538.35 1.2738.4 1.638.4 238.5 1.538.5 1.9338.5 238.5 2.338.5 2.538.5 338.5 3.538.5 6.338.5 8.538.7 2.6538.7 2.838.7 3.538.7 3.5538.7 5.338.86 1.1938.9 1.4539 139 1.239 1.539 1.639 1.7839 239 2.239 2.539 339 3.2

39 3.539 439 4.339 4.539 539 5.339 5.539 639 6.239 6.339 6.539 7.239 839 1039.1 1.339.2 1.939.2 239.2 2.539.2 339.2 3.739.2 3.939.2 539.2 5.739.2 639.34 2.6239.37 2.3439.4 1.639.4 3.139.4 6.639.4 1039.45 1.7839.49 3.5339.5 1.239.5 1.539.5 239.5 2.439.5 2.539.5 339.5 3.239.5 3.2539.5 3.539.5 5.539.5 639.5 8.539.5 1039.6 2.439.6 3.739.69 2.3839.69 3.5339.7 3.539.7 3.639.7 4.3539.76 339.8 2.239.9 3.5340 140 1.240 1.2540 1.540 1.640 1.840 240 2.240 2.440 2.540 2.6540 2.840 3

40 3.1540 3.240 3.340 3.540 3.5540 3.7540 3.940 440 4.540 540 5.240 5.2540 5.340 5.3540 5.540 5.7240 5.940 640 6.440 6.540 740 7.540 840 940 1040 1140 1240 1340 1540 1640 1840.04 2.6240.06 2.740.2 1.7540.2 340.2 5.340.3 2.440.5 240.5 2.440.5 2.540.5 340.5 3.440.5 3.540.5 4.540.5 540.5 5.540.5 640.59 2.6240.6 3.240.6 3.5340.65 5.3340.7 340.7 3.540.8 3.540.8 3.840.8 4.740.87 3.5340.95 2.6240.99 5.3341 141 1.241 1.441 1.541 1.641 1.7541 1.7841 1.841 2

37

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

41 2.541 341 3.541 441 4.541 4.641 541 5.541 641 6.541 741 7.541 841 1541 2141.1 5.841.2 1.641.2 1.841.2 2.6541.2 341.2 3.5541.2 4.741.2 5.341.2 5.741.28 1.5941.28 3.5341.3 1.641.3 1.841.3 2.6241.3 2.741.3 3.1741.3 3.241.3 441.37 1.7841.4 5.341.5 1.541.5 1.641.5 2.941.5 341.5 3.1541.5 3.541.5 441.5 4.541.5 641.6 1.641.6 1.7841.6 2.441.7 3.541.7 4.0541.7 4.1341.8 2.641.82 3.5341.83 2.7941.9 341.91 6.3542 142 1.242 1.542 1.642 1.7842 242 2.2542 2.342 2.542 2.642 2.742 342 3.15

42 3.242 3.542 3.842 442 4.242 4.542 542 5.242 5.442 5.542 5.642 642 6.442 742 7.542 842 942 1042 1142 11.742 1242 1342 1442 1642 2042.2 1.542.2 1.842.2 342.2 5.742.4 1.242.4 4.1342.4 5.3342.42 1.7842.5 1.7842.5 1.842.5 2.6542.5 342.5 3.1542.5 3.242.5 3.542.5 3.5542.5 442.5 4.342.5 5.342.5 842.5 8.342.52 2.6242.57 3.5342.6 442.8 3.5342.8 3.742.8 5.3342.86 3.5342.86 4.3642.86 6.3542.9 4.8242.96 3.5343 143 1.343 1.543 1.643 1.843 243 2.243 2.543 2.843 343 3.2

43 3.543 443 4.543 543 5.243 5.543 643 6.543 843 943 1043 1143 1243 1643 2043.2 243.2 343.4 1.843.4 3.643.5 343.5 443.5 5.343.5 5.443.55 3.5543.69 2.6243.69 343.69 3.543.7 1.843.7 2.843.7 343.7 3.543.7 3.5543.7 5.343.8 1.7843.8 4.143.82 5.3343.92 2.943.99 1.543.99 2.0144 144 1.344 1.544 244 2.544 2.644 2.844 344 3.1544 3.1744 3.544 3.6544 3.744 444 4.244 4.544 544 5.2544 5.3444 5.544 644 6.544 744 844 944 1144 1244.04 3.5344.1 1.6

44.1 2.644.12 2.544.12 2.6244.17 1.7844.2 244.2 2.544.2 344.2 3.344.2 3.744.2 5.144.2 5.744.2 6.744.2 7.544.3 5.744.4 3.144.4 3.1744.4 4.844.4 5.3344.45 2.6244.45 3.5344.5 1.644.5 244.5 2.1544.5 2.444.5 2.544.5 344.5 3.1844.5 3.544.5 4.844.5 5.544.5 644.5 6.2544.5 8.544.6 2.444.7 2.944.7 344.7 3.544.8 3.544.99 1.7845 145 1.245 1.545 1.645 245 2.545 2.6245 2.7545 2.845 345 3.1545 3.545 3.5545 3.7545 445 4.545 4.845 545 5.345 5.545 645 6.445 6.545 745 7.545 845 8.545 945 10

45 1245 1545 2545.2 2.445.2 2.845.2 345.2 5.745.3 5.745.36 3.5345.4 6.545.5 1.245.5 1.545.5 5.545.5 6.845.6 1.245.6 1.545.62 3.5345.69 2.6245.69 3.5345.7 1.545.7 3.545.72 1.7845.84 1.7846 146 1.146 1.246 1.546 246 2.246 2.446 2.546 2.646 346 3.246 3.546 446 4.546 546 5.3446 5.546 646 746 846 1046 1146 2246.04 3.5346.1 2.446.2 246.2 346.2 3.546.2 3.5546.2 5.346.2 5.3346.4 4.646.4 5.346.4 5.446.5 1.846.5 2.546.5 3.546.5 446.5 546.5 5.3346.5 5.746.5 646.5 7.246.69 2.6246.7 1.78

46.7 2.546.8 4.146.99 1.1446.99 3.6746.99 5.3346.99 5.9747 147 1.547 1.647 247 2.1347 2.547 2.647 2.747 347 3.247 3.547 3.747 447 4.547 547 5.3347 5.547 647 6.547 6.747 747 7.547 847 947 1047 1247 16.547.11 147.2 1.547.2 2.447.2 3.347.2 3.547.2 5.747.22 3.5347.22 5.5347.24 4.2747.29 2.6247.35 1.2747.37 1.7847.4 447.4 4.847.5 1.547.5 1.847.5 2.547.5 2.6547.5 2.747.5 347.5 3.1547.5 3.1847.5 3.247.5 3.5547.5 447.5 4.547.5 5.347.5 5.3347.5 5.547.5 5.7547.5 647.5 6.547.55 1.7847.55 3.5547.6 2.4

38

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

47.6 3.5347.6 3.647.6 447.6 5.747.6 9.547.63 3.1847.63 3.5347.63 6.9947.65 1.5747.7 1.547.7 2.6247.7 3.547.7 4.7547.8 347.96 2.3648 148 1.248 1.548 1.5548 1.748 1.7848 1.848 248 2.548 2.648 2.6248 2.7548 348 3.548 3.6548 448 4.248 4.548 548 5.348 5.548 648 6.148 6.548 748 848 948 1048 1148 1248 1348 1648 2248.1 1.248.2 1.248.25 448.3 3.248.32 5.3348.38 2.6248.4 3.548.5 1.548.5 3.548.5 448.5 5.848.5 748.7 2.6548.7 3.548.7 3.5348.7 3.5548.7 5.348.8 448.9 2.6249 1

49 1.549 1.649 1.749 249 2.549 349 3.549 449 4.549 549 5.349 5.549 649 6.2549 749 949 1249.1 5.849.15 1.7849.2 1.849.2 2.449.2 349.2 449.2 4.549.2 5.749.2 6.349.21 3.5349.22 3.9649.3 5.749.4 2.849.4 3.149.44 3.5349.5 2.549.5 349.5 3.549.5 4.549.5 549.5 5.549.5 6.2549.6 2.449.6 3.549.6 5.749.65 1.7849.7 3.549.7 5.349.7 5.749.8 1.850 150 1.250 1.550 250 2.3550 2.450 2.550 2.750 2.850 350 3.2550 3.550 3.5550 3.650 3.8550 450 4.550 4.750 4.850 550 5.2

50 5.350 5.3350 5.550 5.750 650 6.550 750 7.550 850 8.550 950 1050 1150 1250 13.550 1550 1650.1 3.250.1 3.350.16 5.3350.17 1.7850.17 6.9950.2 2.550.2 350.3 2.450.4 2.6250.4 3.5350.47 2.6250.5 2.450.5 350.5 6.350.52 1.7850.8 1.650.8 1.7850.8 3.1850.8 3.250.8 3.5350.8 5.150.8 6.3550.9 2.451 1.551 251 2.551 351 3.251 3.551 3.651 3.851 451 4.351 4.551 551 5.251 5.551 651 951 9.551 1051 1251 12.551.05 1.7851.1 1.651.2 3.651.2 5.351.2 5.751.5 1.551.5 251.5 2.1

51.5 3.5551.5 4.551.5 5.351.6 2.451.6 4.651.6 5.751.7 5.351.8 351.94 3.5351.99 2.7752 152 1.552 252 2.452 2.552 2.752 2.852 352 3.352 3.552 3.952 452 4.552 552 5.3352 5.552 652 6.552 7.552 852 952 1052 1252.07 2.6252.1 152.2 352.2 5.752.3 1.752.3 5.752.39 3.5352.4 5.352.5 1.7852.5 1.852.5 2.252.5 352.5 3.552.5 4.552.5 5.252.5 5.752.5 6.952.54 5.3352.6 1.7552.6 2.452.6 2.852.6 3.552.6 5.752.75 1.7852.9 5.3353 153 1.253 1.553 253 2.553 353 3.553 3.5553 3.653 4

53 4.553 553 5.353 5.553 5.753 5.853 653 753 1053 1253 1453 1653.09 353.1 353.19 3.5353.25 453.28 0.9953.3 3.5353.3 5.353.34 2.4453.34 5.3353.4 3.553.5 1.253.5 1.553.5 353.5 3.5353.5 453.5 5.853.5 953.52 2.6253.57 3.5353.6 2.653.6 3.1753.6 3.5353.6 5.6453.64 2.6553.65 2.6253.67 1.7853.8 453.97 4.7653.98 3.5353.98 6.3554 154 1.554 254 2.354 2.554 2.6554 354 3.1754 3.254 3.554 454 4.554 4.7554 554 5.5546 54 6.354 6.554 754 854 9.554 1254 2054.1 3.1854.1 3.754.2 1.65

54.2 2.354.2 354.2 5.354.2 5.754.3 354.3 5.754.4 3.154.4 4.1354.5 2.554.5 2.754.5 354.5 3.5554.5 5.554.5 754.6 2.454.6 5.754.7 1.454.75 255 155 1.255 1.555 1.7855 1.855 255 2.555 2.655 355 3.255 3.555 3.755 455 4.555 4.755 4.855 555 5.255 5.3355 5.555 655 6.555 755 7.555 855 1055 1355 13.555.2 255.2 355.2 5.755.25 1.7855.25 2.6255.3 5.755.35 2.6255.5 1.7855.5 355.52 2.6255.56 3.5355.6 5.755.7 2.555.7 3.7555.7 455.8 2.155.88 2.0355.9 2.456 156 1.456 1.556 1.78

39

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

56 1.856 256 2.356 2.456 2.556 356 3.1556 3.256 3.556 3.5556 456 4.356 4.556 556 5.256 5.356 5.556 656 6.356 6.556 6.856 756 7.556 856 1056 1256.16 5.3356.16 5.3456.2 356.2 3.456.4 2.556.5 1.756.5 2.456.5 2.4556.5 3.156.5 3.556.5 456.5 5.3356.5 756.5 1556.52 5.3356.6 2.456.7 2.856.74 3.5356.74 5.5356.79 2.9256.8 656.82 2.6256.87 1.7857 157 1.357 1.557 257 2.557 2.657 357 3.557 3.5357 457 4.557 557 5.557 5.757 657 6.557 757 857 9

57 9.557 1057 1557 1757.1 1.7857.1 3.257.14 3.2857.15 2.0357.15 2.2457.15 3.5357.2 1.657.2 357.2 5.757.3 1.557.3 5.257.5 557.5 1057.53 2.0857.53 3.3557.6 1.457.6 2.457.6 3.357.6 5.757.61 2.1657.65 3.5357.75 457.8 2.657.84 6.3558 158 1.558 258 2.558 2.6758 358 3.258 3.558 3.5558 458 4.258 4.558 558 5.358 5.558 5.858 658 6.558 758 7.558 858 958 1058 2058 2358.2 3.158.39 1.7858.4 1.358.42 2.6258.44 1.7858.5 1.2558.5 358.5 3.558.5 558.5 5.3358.5 5.758.5 6.258.5 6.558.6 358.6 7

58.7 5.558.72 6.3558.7 4 3.5358.75 6.3658.8 4.258.8 658.8 6.258.88 2.6259 159 1.559 259 2.459 2.559 2.759 359 3.559 459 559 5.559 659 6.559 759 1059 1159 1259.1 5.859.18 1.0259.2 5.3359.2 5.759.2 11.259.3 3.7359.3 559.3 5.759.36 359.4 2.859.4 3.159.44 2.0159.5 259.5 359.5 5.1759.5 659.5 6.559.52 2.6259.6 2.459.6 5.759.7 3.5359.7 5.3359.7 5.759.7 759.9 2.6259.9 5.259.92 3.5360 160 1.2560 1.560 1.860 260 2.260 2.360 2.560 2.6260 2.6560 2.860 360 3.1560 3.260 3.360 3.5

60 3.5560 3.6560 460 4.260 4.560 4.660 4.860 560 5.360 5.3460 5.460 5.560 5.760 660 760 7.560 860 8.560 960 1060 1160 1260 1360 1460 1560 1660 1860 2060.04 1.7860.1 1.660.1 5.760.2 2.560.2 2.860.2 360.2 5.3560.3 5.3360.3 1560.33 3.5360.4 3.260.5 260.5 2.2560.5 5.560.8 261 161 1.561 1.661 261 2.561 361 3.261 3.561 461 4.361 4.561 561 5.961 661 8.561 961 1061 12.561.01 2.4961.2 1.561.2 4.261.2 5.761.24 3.5361.3 1.7861.5 1.5

61.5 1.7861.5 261.5 2.561.5 2.6561.5 3.5561.5 5.361.5 761.5 7.561.6 2.461.6 2.6261.6 2.761.6 2.961.6 5.761.7 4.561.8 761.83 2.3661.9 3.5361.94 2.2462 1.562 1.7862 262 2.562 2.662 362 3.262 3.562 3.5362 462 4.562 562 5.262 5.562 5.762 662 6.562 762 862 8.562 962 1062 1162 1262 1462 1562 1862.1 2.6262.2 362.2 5.762.23 4.0662.3 3.262.3 5.762.33 1.7862.4 2.862.4 462.4 5.362.5 1.362.5 1.862.5 2.362.5 2.562.5 562.6 5.762.8 2.362.87 2.0362.87 5.3362.9 2.463 163 1.363 1.5

63 1.863 263 2.463 2.563 2.6563 2.763 2.863 363 3.263 3.563 3.5563 463 4.563 563 5.363 5.563 663 6.563 763 7.563 863 963 1063 1463 1563 1663.09 3.5363.09 3.863.1 2.263.1 2.463.12 3.6363.17 2.6263.22 1.563.22 1.7563.22 1.7863.3 10.7563.46 2.8963.49 9.5363.5 2.763.5 3.163.5 3.1563.5 3.263.5 3.5363.5 3.763.5 463.5 4.363.5 4.563.5 5.3363.5 5.563.5 5.763.5 6.3563.5 6.563.5 763.6 4.763.8 5.6663.8 6.263.88 5.563.9 263.9 2.464 164 1.464 1.564 1.664 264 2.564 2.664 2.6264 3

40

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

64 3.564 3.7564 464 4.564 4.864 564 5.3364 5.564 5.764 664 6.564 764 864 9.2764 9.564 1064 1164 1664.2 1.664.2 1.964.2 564.2 5.764.3 1.564.3 5.764.39 1.7864.4 364.4 3.164.4 3.1564.4 4.564.47 2.6264.5 1.564.5 1.864.5 264.5 2.564.5 2.764.5 364.5 3.264.5 3.564.5 5.564.6 2.464.6 3.564.6 5.764.7 364.7 5.364.77 1.0264.77 2.4964.77 2.6264.9 2.664.9 6.665 165 1.565 1.765 1.865 265 2.565 2.6565 2.7565 2.865 365 3.565 3.5565 465 4.565 4.865 565 5.365 5.565 5.7

65 5.865 665 765 7.565 865 965 9.565 1065 10.565 1165 11.265 1265 1365 1565.1 2.465.1 3.1565.1 3.5365.2 565.32 1.5665.35 1.5565.4 1.6765.5 1.565.5 1.5565.5 1.6865.5 265.5 365.5 3.565.5 465.5 565.5 1565.6 5.365.7 1.7865.8 1.6865.8 1.866 166 1.566 266 2.266 2.566 2.666 366 3.566 3.866 466 4.566 566 5.766 666 6.566 766 7.566 866 966 9.566 2766.04 1.7866.04 5.3366.2 5.766.27 2.566.27 2.6266.27 3.5366.3 2.3866.35 2.6266.39 1.966.4 1.7866.4 5.3366.5 166.5 1.5

66.5 266.5 2.566.6 4.7366.6 5.466.6 5.766.67 3.5366.67 4.7666.68 3.5266.68 6.3566.7 266.7 3.266.87 3.5367 167 1.567 267 2.167 2.567 2.767 2.867 367 3.467 3.567 3.5567 467 4.367 4.567 567 5.367 5.3367 5.567 667 767 7.567 867 1067 1367 1667 2067.05 2.0567.1 1.667.1 267.2 3.667.2 567.2 5.767.4 4.5567.49 2.2667.5 467.6 2.467.95 2.6268 168 1.268 1.568 1.768 1.868 268 2.468 2.568 2.768 2.868 368 3.268 3.568 3.5368 468 4.568 568 5.3368 5.5

68 668 6.568 768 868 8.568 1068 1268 1568.26 3.5368.3 2.468.5 168.5 1.868.5 5.968.5 6.868.5 7.568.5 12.568.52 2.6268.6 2.268.7 5.3368.8 3.5368.8 3.8568.8 5.568.84 3.6868.95 5.369 1.569 269 2.169 2.469 2.569 369 3.569 3.5569 469 4.569 569 5.369 5.569 5.769 669 869 1169.2 5.769.22 5.3369.22 769.3 2.469.3 5.769.4 2.869.4 3.169.4 5.269.44 3.5369.44 469.5 269.5 2.569.5 369.5 3.569.5 469.5 4.569.5 569.5 869.52 2.6269.57 1.7869.6 269.6 2.469.6 5.769.8 5.369.85 3.5369.85 5.769.9 3.17

70 0.670 170 1.470 1.570 1.670 1.7870 1.870 270 2.270 2.570 370 3.270 3.3770 3.570 470 4.570 4.670 570 5.570 5.770 5.870 670 6.570 770 7.570 870 9.570 1070 1170 1270 1570 17.570.2 4.270.2 5.770.44 370.5 2.470.5 2.570.5 370.5 4.570.5 7.270.6 5.770.6 770.6 870.8 5.370.8 6.271 1.571 1.6571 271 2.571 2.6571 371 3.571 3.5571 471 4.571 571 5.371 871 8.571 971 9.571 1071 1171.12 2.6271.2 271.2 2.271.2 5.771.44 3.53

71.5 1.271.5 1.571.5 1.671.5 271.88 3.4871.9 672 1.572 272 2.172 2.572 2.872 372 3.2572 3.572 472 4.272 4.572 4.7572 572 5.572 672 6.9972 772 7.572 872 8.572 972 1072 1172 1272 1872.19 5.3372.2 5.772.4 1.7872.4 5.3372.5 1.572.5 2.472.5 3.572.5 472.5 572.5 6.572.62 3.5372.62 5.3372.69 2.6272.76 1.7873 173 1.273 1.573 273 2.273 2.573 2.6573 373 3.273 3.573 3.5573 3.973 473 4.573 573 5.373 673 6.9973 873 1173 1273 1573.02 3.53

41

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

73.17 2.6273.18 373.28 5.3373.39 5.3373.5 273.5 373.5 573.7 3.673.8 4.574 174 1.574 274 2.574 374 3.1574 3.374 3.574 474 4.574 574 5.574 5.774 674 6.474 774 7.574 874 974 1074 1174 1474.1 3.374.1 8.474.14 2.6274.2 5.774.3 2.6274.3 5.774.4 3.174.5 374.5 3.174.5 3.274.5 674.5 6.774.6 374.6 3.5374.6 3.674.6 5.774.63 5.3375 175 1.575 1.7875 275 2.475 2.575 2.775 2.875 375 3.575 3.5575 475 4.575 4.875 575 5.375 5.475 5.575 5.675 5.8

75 675 775 7.575 875 975 1075 12.575 1375 1575 1675.5 275.5 9.575.56 6.9975.57 3.5375.57 5.3375.6 275.7 9.4575.8 3.5375.8 3.875.8 5.3375.87 2.6275.92 1.6875.92 1.7875.97 3.5376 176 1.276 1.576 276 2.276 2.576 376 3.276 3.576 476 4.176 4.2576 4.576 4.7676 576 5.276 5.576 5.676 676 7.6576 876 1076 1176 1276 1376 1576 2076.2 3.1776.2 3.276.2 5.3376.2 5.776.2 6.3576.2 6.876.3 2.476.5 5.576.5 5.776.7 4.576.9 3.5376.94 1.7876.99 2.4577 177 1.577 1.877 2

77 2.577 377 3.577 477 4.377 4.577 577 5.577 677 777 877 1077 1277.1 2.6277.2 1.2677.2 5.777.22 3.5377.3 2.6277.3 4.577.3 5.777.39 3.5377.4 6.677.5 1.7877.5 2.577.5 2.6277.5 3.5577.5 5.377.5 677.62 3.5377.69 3.5377.9 5.778 178 1.278 1.2578 1.578 1.7878 278 2.378 2.578 378 3.578 3.678 478 4.378 4.578 578 5.3378 5.578 678 6.578 878 1078 1378 1678.2 5.778.5 1.7878.5 2.578.5 578.5 5.778.5 678.6 178.74 2.6278.74 5.3378.8 5.178.8 6.8178.97 3.5379 1.579 1.78

79 279 2.179 2.479 2.579 2.679 379 3.1779 3.279 3.579 479 4.579 579 5.779 679 6.379 779 879.05 2.6279.2 2.779.2 479.2 5.779.2 7.579.3 2.579.3 3.5379.3 5.379.3 5.779.4 279.4 3.179.4 4.7579.4 6.179.5 279.5 2.579.5 2.6279.5 379.5 479.5 5.279.5 779.6 5.779.62 3.5379.77 5.3379.79 3.5380 180 1.280 1.2580 1.380 1.580 1.7580 280 2.480 2.580 2.880 380 3.280 3.3380 3.580 3.5580 3.680 3.880 480 4.380 4.580 4.880 580 5.380 5.580 5.780 5.880 6

80 6.380 6.580 780 7.580 880 8.580 980 1080 1180 1280 1380 1580 16.580.42 2.6280.44 1.7880.5 1.7580.5 280.5 2.480.5 480.5 780.6 2.6280.7 3.680.8 2.380.8 2.680.8 5.3380.85 3.5381 181 1.581 281 2.481 2.581 381 3.581 481 4.581 581 5.181 5.3481 5.581 681 781 1481.15 4.5281.2 5.781.4 381.5 1.2581.5 1.581.5 2.581.5 2.881.5 481.5 681.51 2.581.52 3.5381.6 2.281.7 1.7881.7 781.75 1.881.9 1.7881.9 5.381.92 5.3381.92 6.9982 1.582 282 2.482 2.582 382 3.482 3.5

82 482 4.582 582 5.382 5.582 682 6.582 782 7.582 882 1082 1282.14 3.5382.16 4.6382.2 5.782.22 2.6282.27 5.3382.28 1.7882.34 2.6282.5 2.282.5 2.482.5 3.282.5 3.5582.5 482.5 5.382.5 982.55 3.1882.6 2.282.6 482.7 5.782.8 582.8 5.982.87 5.3382.9 283 183 1.583 283 2.583 383 3.283 3.2583 3.583 3.7583 483 4.583 583 5.583 683 6.583 783 983 1083 1283.05 3.5183.2 283.2 5.783.4 3.583.5 1.283.5 1.2583.5 383.5 3.383.5 583.7 4.583.8 2.6284 1.584 1.7884 284 2.5

42

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

84 384 3.584 484 4.584 584 5.384 5.484 5.784 684 6.584 784 884 984 1084 1284.1 3.584.1 5.784.2 384.2 5.784.3 2.684.3 5.784.3 6.484.4 3.184.4 484.5 284.5 384.5 3.584.5 4.584.5 584.5 9.4584.52 2.6284.6 384.6 5.784.68 2.6284.7 1.285 185 1.585 1.7885 1.885 285 2.485 2.585 2.6285 385 3.185 3.585 3.5585 3.7585 485 4.585 4.985 585 5.2585 5.385 5.585 5.885 685 6.385 6.585 6.9985 785 7.585 885 985 1085 1285 12.585 13

85 1485 1585 1685.09 5.3385.09 6.9985.32 3.5385.34 1.7885.4 385.4 785.5 2.485.5 2.585.5 3.285.5 3.585.5 4.385.5 5.785.5 685.55 3.1885.6 3.285.62 3.5385.7 4.7685.8 1.2585.9 5.3386 1.2586 1.586 1.686 1.786 286 2.486 2.586 2.786 386 3.586 3.9886 486 4.186 4.586 586 5.486 5.586 686 6.486 6.586 786 7.586 886 1086 1286 12.586.2 5.786.3 2.686.36 2.6286.5 286.5 2.586.5 386.5 4.7586.5 586.69 5.3386.7 386.7 3.586.9 3.687 1.587 287 2.587 2.687 387 3.587 487 4.4

87 4.587 587 5.3387 5.8987 687 787 887 8.587 1087 1287 1587 1887 2087.1 2.487.2 2.587.2 5.787.2 887.3 6.9987.43 787.45 6.9887.5 1.587.5 1.787.5 3.587.5 3.5587.5 3.687.5 5.387.5 6.287.6 3.587.63 4.1987.9 5.388 1.588 288 2.288 2.588 2.6288 2.888 388 3.288 3.588 3.688 3.788 3.7588 3.888 488 4.588 588 5.388 5.588 5.788 688 7.588 888 1088 1288 1588 2088 2188.1 3.688.24 2.3888.26 6.9888.27 5.3388.27 6.9988.3 2.6288.3 788.49 5.5788.5 2.588.5 3.5388.5 5.7

88.57 2.6288.57 3.1588.59 5.3288.62 1.7888.8 388.86 6.9988.9 2.488.9 2.588.9 3.588.9 3.9688.9 5.8488.9 6.3589 1.589 1.7889 1.989 289 2.389 2.489 2.589 389 3.589 489 4.589 589 5.589 5.789 689 789 7.589 889 1189 1289 1389.1 5.789.1 5.889.2 389.2 5.789.3 5.789.4 3.189.4 5.389.41 3.1889.5 2.589.5 389.5 3.589.6 3.1589.6 5.789.69 5.3390 190 1.590 290 2.290 2.590 2.890 2.990 390 3.190 3.590 3.5590 3.990 490 4.290 4.590 4.690 4.890 590 5.190 5.2590 5.3

90 5.590 5.790 5.7290 5.890 690 6.390 6.590 790 7.590 890 8.390 8.590 990 1090 1190 1290 1490 1590 1690 2090 2590.3 490.35 1.7890.47 3.1890.49 5.3390.5 1.590.7 3.690.77 491 1.591 291 2.591 2.6591 391 3.591 491 591 791 891.2 5.791.44 5.3391.5 391.5 3.291.5 791.6 3.691.67 3.5391.67 3.891.7 1.7892 1.592 1.7392 292 2.592 392 3.292 3.592 3.5392 492 4.592 592 5.392 5.592 692 792 7.592 892 8.592 992 9.592 10

92 1392 1492.2 5.792.33 1.7892.38 3.5392.5 292.5 2.292.5 3.592.5 3.5592.5 5.392.62 5.3392.71 2.6292.76 2.6292.92 2.6292.99 2.0393 1.593 293 2.593 2.893 393 3.593 493 593 5.3393 693 6.593 1293 12.793 2093.2 3.693.2 9.593.34 12.7 93.5 293.5 4.593.73 1.8593.75 294 194 1.594 294 2.394 2.594 2.6294 2.9594 394 3.594 494 594 5.594 5.794 694 794 894 994 9.594 10.594.1 5.794.1 694.2 5.594.2 5.794.3 5.794.4 3.194.5 294.5 2.594.5 394.6 5.394.6 5.794.62 5.3394.84 3.53

43

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

94.84 4.7594.93 2.6294.97 1.7895 195 1.595 1.7895 1.895 295 2.295 2.395 2.595 2.6595 395 3.595 3.5595 495 4.595 595 5.395 5.595 5.695 5.795 695 6.395 6.595 795 7.595 895 1095 1195 11.295 1295 1595 2095.09 5.3495.2 2.495.25 4.7695.5 395.5 495.5 4.3295.5 696 1.596 1.796 296 2.596 396 3.596 496 4.396 4.596 596 5.3396 696 796 896 1096 1496 1596.1 5.796.11 2.6296.3 3.696.5 2.6296.5 496.5 6.596.6 1.696.6 1096.7 7.396.76 1.86

97 197 1.597 1.697 297 2.597 2.7597 397 3.597 3.897 497 4.597 597 5.297 5.597 697 797 897 997 1697.2 5.797.29 5.3397.4 5.397.5 397.5 3.5597.5 4.597.5 597.5 5.397.5 5.597.76 2.6297.79 6.3397.79 6.3597.8 3.5397.8 5.3398 198 1.598 298 2.298 2.598 398 3.598 498 4.298 4.598 598 5.298 5.598 698 6.898 798 7.598 898 998 1098.02 3.5398.05 1.7898.42 4.7798.5 1.598.5 3.598.5 5.399 1.599 299 2.599 399 3.299 3.599 499 599 5.5

99 5.799 699 6.599 799 7.799 899 999.1 2.499.1 5.799.2 5.799.3 399.3 5.799.4 3.199.4 4.199.4 6.399.5 1.899.5 399.5 4.599.6 5.7100 1100 1.4100 1.5100 1.6100 2100 2.2100 2.5100 2.75100 3100 3.4100 3.5100 3.55100 4100 4.5100 4.7100 5100 5.2100 5.3100 5.33100 5.5100 5.7100 6100 6.3100 6.5100 7100 7.5100 8100 9.5100 10100 12100 12.5100 13.5100 15100 16100 20100.2 4.35100.5 2.4100.5 3.5100.5 4.5100.5 5.3100.5 7100.9 7.6100.95 1.6100.97 5.33100.97 6.99101 2101 2.5101 3101 3.5

101 4101 4.3101 4.5101 5101 5.33101 5.5101 6101 7101 12101.2 3.53101.2 4.2101.2 5.7101.27 2.62101.3 7.2101.34 1.78101.4 4.8101.5 2101.5 3101.5 3.5101.6 3.2101.6 5.7101.6 6.35101.6 6.99101.6 9.5102 1.5102 2102 2.5102 3102 3.5102 4102 4.5102 4.75102 5102 5.5102 5.7102 6102 6.5102 7102 8102 9.5102 12102 14102.2 3.53102.3 9102.3 9.2102.5 1.6102.5 2.4102.5 2.5102.5 5.5102.5 6.99102.6 4.5102.8 3.3102.8 9.5103 1.5103 2103 2.5103 3103 3.2103 3.5103 3.55103 4103 4.5103 5103 5.2103 5.3103 6103 7103 8

103 10103 12103 14103.5 1.5103.5 3103.5 3.2103.5 4103.5 4.2103.5 4.5103.51 3.18104 1.78104 2.5104 2.62104 3104 3.5104 4104 4.5104 5104 5.5104 5.7104 6104 6.13104 7104 8104 9104 10.5104 13104 14104 16104.1 3.18104.1 5.7104.14 5.33104.14 6.99104.2 3104.2 5.7104.3 5.7104.3 6104.37 3.53104.37 3.8104.4 1.78104.4 3.1104.4 5.3104.5 2104.5 2.6104.5 3104.5 4104.5 5104.5 6104.6 5.7104.77 4.76104.78 9.53104.8 5.33105 1.5105 1.78105 2105 2.5105 2.75105 3105 3.1105 3.5105 4105 4.3105 4.4105 4.5105 4.6105 5105 5.3105 5.5

105 5.8105 5.9105 6105 6.4105 6.5105 7105 7.25105 7.5105 8105 8.4105 8.5105 9.5105 10105 10.3105 12105 14105 15105 17.5105.1 2105.1 4.5105.2 5.7105.28 5.33105.5 1.5105.5 2.4105.5 3105.5 4105.8 5.4106 1106 1.8106 2106 2.4106 2.5106 2.62106 3106 3.5106 3.55106 4106 4.5106 5106 5.3106 5.5106 6106 6.3106 6.5106 6.8106 7106 8106 8.5106 10106 12106.3 3.34106.5 2.4106.5 4.75106.5 4.8107 1.5107 2107 2.5107 2.7107 3107 3.5107 4107 4.3107 4.5107 5107 5.5107 6107 7107 7.5

44

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

107 8107 9107 10107 14107 15107.2 5.33107.32 5.33107.32 6.99107.5 3.4107.54 3.53107.54 4107.6 3.6107.63 2.62107.7 1.78108 2108 2.5108 3108 3.2108 3.5108 4108 4.2108 4.5108 4.75108 5108 5.2108 5.3108 5.5108 6108 7108 8108 9108 9.5108 10108 11108 15108 16108 18108.3 3.8108.5 2108.5 11.5108.8 6109 2109 2.5109 3109 3.4109 3.5109 3.55109 4109 4.5109 5109 5.3109 5.5109 5.7109 5.8109 6109 7109 8.5109.1 5.7109.14 3.53109.2 5.7109.3 5.7109.4 3.1109.5 3109.5 4.75109.5 5109.5 8.4109.52 3.53109.54 5.33

109.6 5.7109.75 4.8109.78 4.83109.78 4.85110 1.5110 1.6110 1.78110 2110 2.25110 2.5110 3110 3.2110 3.5110 4110 4.5110 4.6110 4.75110 5110 5.3110 5.5110 5.6110 5.7110 5.8110 6110 6.5110 7110 7.5110 7.7110 8110 8.5110 9110 9.5110 10110 11110 12110 14110 15110 20110.3 2.4110.4 5.8110.49 3.53110.49 5.33110.49 6.99110.5 2.4110.5 3110.5 6110.72 3.53110.74 1.78110.8 4111 2111 2.5111 3111 3.3111 3.5111 4111 5111 6111 7.7111 9111.1 1.6111.13 4.76111.2 5.7111.5 2.4111.5 2.5111.5 2.6111.5 3111.5 5111.6 5.7

111.8 3.53112 1.5112 2112 2.5112 3112 3.5112 3.55112 4112 4.5112 4.6112 5112 5.3112 6112 6.3112 7112 8112 11112 14112.1 5.3112.3 5.7112.5 1.78112.5 5112.5 5.5113 1.5113 2113 2.5113 3113 3.5113 3.53113 4113 5113 5.5113 6113.41 6.35113.5 2113.5 5.33113.5 6.8113.66 8.5113.67 5.33113.67 6.99113.7 5.5113.7 7113.8 8.4113.9 3.53113.98 2.62114 1.3114 1.6114 1.78114 2114 2.5114 3114 3.5114 4114 4.6114 5114 5.3114 5.5114 5.7114 6114 6.5114 7114 8114 9114 10114 10.5114 14114 17114.19 3.53

114.19 5.43114.2 5.7114.3 3.15114.3 4.2114.3 4.7114.3 5.7114.3 15114.4 3.1114.4 3.8114.5 2.5114.5 3114.5 3.3114.5 4114.5 6114.5 12114.6 5.7114.7 6.99114.81 5.34114.9 5.43115 1.5115 2115 2.5115 3115 3.3115 3.5115 3.55115 3.6115 4115 4.1115 4.5115 5115 5.07115 5.1115 5.3115 5.5115 5.6115 6115 7115 7.5115 8115 8.4115 8.5115 9115 9.1115 10115 14115 15115 20115.7 5.7115.75 3116 1.5116 1.75116 2116 2.5116 3116 3.5116 4116 4.5116 5116 5.3116 5.5116 6116 7116 7.5116 10116 15116.4 6.99116.5 2

116.5 4.1116.5 4.5116.7 4.4116.84 5.33116.84 6.99117 1.5117 2117 2.5117 2.75117 3117 3.5117 4117 4.2117 4.4117 5117 5.3117 6117 6.5117 7117 8117 9117 19117.06 3.81117.07 3.53117.1 1.78117.2 5.7117.48 3.18117.48 5.33117.5 2.5117.5 3.2117.5 3.53117.5 4117.5 5117.5 5.33117.5 5.7117.8 6.35118 2118 2.5118 2.62118 2.65118 3118 3.25118 3.5118 3.55118 4118 4.5118 5118 5.3118 6118 6.3118 7118 8118 9118 10118 13118.4 4118.47 9.27118.5 3118.5 5118.5 6.5118.65 4.45118.72 2.62118.8 8.4119 2119 2.5119 3119 3.5119 4

119 5119 5.2119 5.7119 6119 6.2119 7119 8119 10119.2 5.2119.2 5.7119.3 5.7119.4 3.1119.5 2119.5 3119.5 3.3119.5 5.5119.5 7119.6 5.7119.8 1.5119.8 3119.85 4.45119.89 3.53120 1.5120 1.6120 2120 2.1120 2.2120 2.5120 2.7120 3120 3.2120 3.26120 3.5120 3.6120 3.7120 4120 4.5120 5120 5.6120 5.8120 6120 6.5120 7120 8120 8.5120 9.1120 10120 11.5120 12120 14120 15120 16120 25120 30120.02 5.16120.02 5.33120.02 6.99120.25 3.53120.32 3.15120.33 2.62120.34 3.53120.4 1.78120.4 3.8120.5 6.8120.5 12120.62 2.62120.65 9.53120.7 5.33

45

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

120.82 2.62121 1.4121 1.5121 1.6121 2.5121 3121 3.5121 4121 5121.4 7.8121.5 1.2121.5 2121.5 2.2121.5 3121.5 4121.5 5.7122 1122 1.25122 1.3122 1.8122 1.9122 2122 2.5122 3122 3.5122 3.55122 4122 4.2122 4.5122 4.7122 5122 5.3122 5.34122 5.5122 6122 7122 8122 8.5122 9122 9.5122 10122 12122 18122 20122.42 3.53122.5 2122.5 2.5122.5 4122.8 3.5123 2123 2.5123 3123 3.3123 3.5123 4123 4.5123 5123 6123 6.3123 6.5123 7123 7.5123 8123 9123 12123 13123.03 3.68123.19 4.85

123.2 5.33123.2 6.99123.26 3.68123.42 3.53123.44 1.78123.5 3123.5 3.5123.5 4123.75 4.25123.8 3.2123.8 4.76123.8 5.33124 2.5124 3124 3.2124 3.5124 4124 4.15124 4.5124 5124 5.4124 5.7124 6124 6.5124 7124 8124 8.5124 9124 13124 18124.2 1.78124.2 2.62124.2 5.7124.2 6.99124.3 5.7124.4 2.62124.4 3.1124.5 2124.5 3124.5 4124.5 5124.6 3.5124.6 5.7124.6 6.99124.8 2.5124.8 9124.82 1.78125 1.5125 1.8125 2125 2.4125 2.5125 2.65125 3125 3.5125 3.55125 4125 4.2125 4.5125 5125 5.3125 6125 6.5125 7125 7.5125 8125 8.5125 9.1

125 10125 12125 12.5125 15125.1 6.6125.2 5.7125.5 5126 2126 2.2126 2.4126 2.5126 3126 3.2126 3.5126 4126 4.5126 5126 5.33126 5.5126 5.7126 6126 7126 7.5126 8126 9126 10126 13126 14126 18126.37 5.33126.37 6.99126.5 3126.5 3.2126.57 5.33126.6 3.53126.67 2.62126.76 1.78126.9 6.4127 1.5127 2127 2.5127 3127 3.5127 4127 4.5127 5127 5.33127 5.5127 6.75127 8127 10127.5 2127.5 3127.5 4127.5 5.7127.5 6.8127.7 1.5127.7 4128 1.5128 2128 2.5128 2.6128 3128 3.5128 3.55128 4128 4.5128 5

128 5.3128 6128 6.6128 7128 7.5128 8.5128 9128 10128 12128.5 2.5128.5 2.6128.5 3.5128.5 4128.5 12129 2129 2.5129 3129 3.5129 4129 4.3129 4.5129 5129 5.5129 8129 10129 11129.04 5.33129.1 3.3129.14 3.1129.2 5.7129.3 5.4129.3 5.7129.4 1.78129.4 3.1129.5 3129.5 5129.5 5.33129.54 1.65129.54 5.33129.54 6.99129.6 5.7129.77 3.53129.77 3.8130 1.5130 2130 2.4130 2.5130 3130 3.15130 3.5130 4130 4.2130 4.3130 4.5130 5130 5.5130 5.8130 6130 6.35130 6.5130 6.65130 7130 7.5130 8130 9130 9.6130 10130 10.8

130 11130 12130 15130 25130.18 5.33130.5 2.5130.5 3130.5 3.5130.5 4130.7 6130.85 7131 1.7131 2.4131 2.5131 3131 3.5131 4131 4.5131 5131 5.3131 7131 10131.2 2.4131.2 5.7131.3 5.7131.5 3.55131.5 4131.5 4.5131.57 1.78131.6 5.7131.74 1.78131.8 1.78132 1.5132 1.7132 1.8132 2132 2.4132 2.5132 3132 3.5132 3.55132 3.9132 4132 4.5132 5132 5.3132 5.65132 6132 7132 8132 10132.2 2.3132.2 5.7132.4 2.62132.5 1.6132.5 2.4132.7 5.7132.72 2.62132.72 5.33132.72 6.99132.9 2.5132.94 3.53133 1.5133 2133 2.5133 2.62133 3133 3.2

133 3.25133 3.5133 4133 4.4133 4.5133 5133 6133 7133 8133 10133 12133 13133 16133.07 1.78133.2 5.7133.3 6.4133.35 3.17133.35 5.33133.35 12.7 133.5 4133.5 7133.6 2.2133.8 8.4134 1.5134 1.6134 2134 2.5134 3134 3.1134 3.2134 3.5134 4134 4.2134 4.5134 5134 6134 6.8134 8134 11134.1 8.4134.2 4134.2 5.7134.3 5.7134.3 6134.4 3.1134.5 1.78134.5 2134.5 3134.5 4134.5 4.5134.5 5134.5 6.99134.6 5.7135 1.5135 1.9135 2135 2.2135 2.5135 2.65135 2.75135 3135 3.1135 3.2135 3.38135 3.5135 4135 4.1135 4.5

46

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

135 5135 5.5135 5.7135 5.8135 6135 6.5135 7135 7.5135 7.7135 8135 9135 9.1135 10135 11135 12135 13135 15135 17135 17.5135 18135.4 4.2135.5 4135.5 9.2135.6 4.12135.7 3.53135.76 1.78135.9 5.33135.9 6.99136 2.5136 3136 3.5136 3.55136 4136 4.25136 5136 5.3136 6136 7136 8136 10136 12136 13136 17136.12 3.53136.5 4136.5 4.5136.5 6136.53 5.33137 2.5137 2.62137 3137 3.4137 3.5137 4137 4.5137 4.7137 5137 6137 6.5137 7137 8137.37 2.62137.5 2.5137.5 3137.8 20138 2138 2.1138 2.5

138 3138 3.5138 4138 4.4138 4.5138 5138 5.3138 6138 6.5138 7138 8138 10138 16138.5 6.55138.94 1.78139 2.5139 3139 3.5139 4139 4.5139 5139 6139 7139.07 1.78139.07 5.33139.07 6.99139.2 2.4139.2 2.8139.2 5139.2 5.7139.2 6139.3 2.4139.3 3.53139.3 5.7139.38 2.62139.4 3.1139.5 3139.5 4.5139.6 5.7139.7 4.75139.7 5.33139.7 6.99139.7 7.92139.7 15140 1.5140 1.78140 2140 2.3140 2.4140 2.5140 2.65140 3140 3.15140 3.2140 3.5140 3.55140 3.75140 3.8140 4140 4.3140 4.5140 5140 5.3140 5.5140 5.8140 6140 6.3140 6.35

140 7140 7.5140 8140 8.6140 10140 11140 12140 15140 16140.37 3.53140.5 4.5140.64 5.34141 2.4141 2.5141 3141 3.5141 4141 4.5141 5141 6.25141 7141 9.8141.5 2.5141.5 3141.5 7141.5 10141.5 12142 2142 2.5142 3142 3.5142 4142 5142 5.33142 6142 6.3142 6.5142 7142 7.5142 8142 10142 12142 18142.11 1.78142.24 5.33142.24 6.99142.47 3.53142.5 3142.5 5142.7 5.7142.8 5.8142.88 5.33143 1.78143 2143 2.5143 3143 3.5143 3.7143 3.97143 4143 5143 5.7143 6143 6.35143 6.5143 8143 10143 12

143.4 3143.5 1.6143.5 1.78144 2.5144 3144 3.5144 3.7144 3.8144 4144 4.5144 5144 5.25144 5.5144 6144 6.5144 8144 10144 10.7144.02 1.78144.1 8.4144.2 3144.2 5.7144.27 4.06144.3 5.7144.4 3.1144.5 3144.5 3.7144.5 4144.6 5.7144.7 3145 1.5145 2.5145 3145 3.5145 3.55145 4145 4.2145 5145 5.25145 5.3145 5.5145 6145 6.5145 7145 7.5145 8145 8.6145 10145 15145.29 1.78145.41 3.3145.42 5.16145.42 5.33145.42 6.99145.42 7.92145.45 6.55145.5 6.35145.5 6.5145.65 3.53145.72 2.62145.77 1.78146 2146 2.5146 3146 3.5146 4146 4.5146 4.57

146 5146 5.5146 6146 7146 8146 12146.05 5.33146.07 4.7146.1 3.2146.3 5.7146.5 4147 1.78147 2.5147 3147 3.5147 4147 4.33147 5147 6.5147 8147 14147 15147.3 3147.5 3147.5 4.5147.55 2.62148 1.78148 2148 2.5148 3148 3.5148 3.75148 4148 4.5148 5148 5.5148 6148 7148 8148 10148 12148.2 5.7148.46 1.78148.5 2148.5 4148.5 5148.5 7.5148.5 8.4148.59 5.33148.6 5.33148.6 6.99148.82 3.53149 2.5149 3149 3.5149 4149 5149 6149 6.5149 7149 8149 12149.1 8.4149.2 4.76149.2 5.7149.2 6.2149.23 5.33149.3 5.7

149.5 2149.5 3149.5 8.4149.5 9.5149.6 5.7150 1.2150 2150 2.38150 2.5150 2.62150 3150 3.1150 3.5150 3.55150 4150 4.5150 5150 5.3150 5.4150 5.5150 5.8150 6150 6.35150 6.5150 6.7150 7150 7.5150 8150 9150 10150 11150 12150 15150 20150.88 3.53151 2.6151 3151 3.5151 4151 5151 7151 8151.4 4151.5 2.5151.5 8.5151.59 1.78151.64 1.78151.69 3.2151.77 3151.77 5.33151.77 6.99151.78 1151.8 4151.99 2.4151.99 3.53152 1.5152 1.6152 2152 2.5152 2.6152 3152 3.5152 4152 5152 5.1152 5.5152 6152 7

47

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

152 7.5152 8152 8.5152 10152 12152.07 2.62152.09 5.12152.2 5.5152.5 1.5152.5 2.5152.5 7152.62 2.62153 2153 2.5153 3153 3.5153 4153 4.5153 5153 6153 10153 14153 15153.5 1.6153.5 3153.5 5153.5 6.8153.52 6.99154 3154 3.5154 4154 5154 6154 7154 8154 10154 12154.1 8.4154.2 5.33154.2 5.7154.3 5.7154.3 6.4154.4 3.1154.4 4154.5 3154.5 4154.5 5154.5 8.4154.5 10154.81 1.78155 1.5155 1.7155 2155 2.5155 2.6155 3155 3.1155 3.2155 3.5155 3.55155 4155 4.2155 4.5155 5155 5.3155 5.33155 5.5155 5.7

155 6155 6.75155 7155 7.5155 8155 9155 9.5155 10155 15155.5 6155.5 7155.6 5.33155.6 6.99156 2156 2.5156 3156 3.5156 4156 4.8156 5156 5.5156 6156 6.5156 7156 8156 10156 12156 16156.3 5.7156.5 2.5156.5 5.7156.5 7157 1.5157 2157 3157 3.5157 4157 4.5157 5157 6157 6.5157 6.55157 7.5157 8157 8.3157 15157 20157.5 7158 1.78158 2158 2.5158 3158 3.5158 4158 4.5158 5158 6158 6.5158 6.7158 6.9158 7158 8158 12158 16158 18158.12 2.62158.12 5.33158.12 6.99

158.35 3.53158.4 3.2158.41 2.62158.44 3.53158.59 5.33158.75 6.35158.75 12.7158.8 6.4158.88 2.62159 2.5159 3159 3.5159 4159 5159 6159 6.3159 6.8159 7159 11159.1 8.4159.2 5.7159.2 7159.3 2.4159.3 5.7159.5 2.5159.5 3159.5 6.99159.5 8.4159.5 9.5159.7 3160 1.5160 2160 2.3160 2.4160 2.5160 3160 3.5160 3.55160 4160 4.2160 4.5160 4.75160 5160 5.25160 5.3160 5.5160 5.8160 6160 7160 7.2160 7.5160 8160 8.5160 9160 10160 12160 14160 14.3160 15160 16160 20160.3 2.5161 2.4161 3161 3.5161 4161 5161 10

161.1 10161.16 1.78161.3 5.33161.3 10161.6 2.4161.9 6.99162 2.3162 2.5162 3162 3.15162 3.5162 3.53162 4162 4.5162 5162 6162 7162 8162 10162 12162.1 5.2162.3 2.5162.3 6.35162.5 2.5162.5 3.5162.5 4162.6 7162.76 2.38163 1.5163 1.78163 2163 3163 3.5163 4163 4.5163 5163 6163 6.35163 7163 9163.1 2.5163.3 2.5163.6 2.2163.7 8.6163.8 7164 2164 3164 3.5164 4164 4.1164 4.7164 5164 6164 7164 7.2164 8164 8.3164 8.4164 8.5164 10164 12164 12.7164.1 8.4164.2 5.7164.2 6.99164.3 3164.3 5.7164.34 1.78

164.47 5.33164.47 6.99164.5 2164.5 3164.5 3.53164.5 7164.5 8.4164.5 13164.67 5.33164.7 3.53164.78 2.62165 1.5165 2165 2.4165 2.5165 3165 3.5165 3.55165 4165 4.5165 5165 5.3165 5.5165 6165 6.2165 6.5165 7165 7.5165 8165 10165 12165 14165 16165 20165.4 5.33165.5 4165.5 5.5166 1.78166 2.5166 3166 3.5166 4166 5166 6166 6.2166 10166 13166 15166 19166.1 2.5166.2 14166.2 20166.7 6.99166.75 2166.8 5.3167 2.5167 3167 3.5167 4167 5167 6.5167 7167 8167 10167.28 8167.4 3.3167.5 2.62167.5 3.5

167.5 5.7167.5 8167.51 1.78167.7 5.33167.8 2.62168 2168 3168 3.5168 4168 4.5168 5168 6168 7168 8168 10168 11168 12168 16168.3 5.7168.3 6.99168.5 3168.5 6.25169 2.4169 2.5169 3169 3.5169 4169 5169 6169 15169.1 8.4169.2 5.7169.2 6.2169.2 7169.3 5.7169.5 3169.5 8.4170 1.78170 2170 2.4170 2.48170 2.5170 2.62170 3170 3.1170 3.2170 3.5170 3.55170 4170 4.5170 5170 5.3170 5.5170 5.8170 6170 6.4170 6.5170 7170 7.5170 8170 8.5170 9170 9.5170 10170 12170 12.5170 13170 14

48

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

170 15170.3 4.7170.39 3.53170.4 4170.69 1.78170.82 5.33170.82 5.83170.82 6.99171 2.7171 3171 3.5171 3.53171 4171 5171 7171 9171 10171 11171 12171.05 3.53171.13 2.62171.4 3.2171.45 6.35172 1.78172 2172 2.5172 3172 3.5172 4172 4.2172 4.5172 4.8172 5172 5.5172 6172 6.3172 7172 8172.5 2.5172.5 3.5173 2173 2.4173 2.5173 3173 3.1173 3.5173 3.6173 4173 5173 5.33173 8173 9173 10173.37 5.7173.5 3173.5 5173.87 1.78174 2.5174 2.62174 3174 3.2174 3.3174 3.5174 4174 5174 5.25174 5.33174 6

174.1 8.4174.2 3.6174.2 5.7174.3 5.33174.3 5.7174.4 3.2174.5 3174.5 8.4174.6 6.99175 2175 2.4175 2.5175 2.62175 2.7175 3175 3.5175 3.55175 4175 4.5175 5175 5.2175 5.3175 5.5175 6175 7175 7.5175 8175 10175 12175 13175 15175.13 5.33175.3 2.4175.5 3175.6 14175.6 20176 2.4176 2.5176 2.7176 3176 3.5176 3.6176 4176 5176 6176 7176.2 7176.26 2.38176.8 3.53176.8 3.6177 1.5177 1.78177 2177 2.62177 3177 3.5177 4177 4.4177 5177 7177.17 5.33177.17 6.99177.4 3.53177.4 5177.4 5.5177.47 2.62177.5 4.2177.5 10

177.5 12177.8 6.35177.8 6.6177.9 8178 2178 3178 3.5178 4178 4.5178 5178 6178 7178 8178 10178 12178 15178 20179 2.5179 3179 3.2179 3.5179 4179 5179 5.5179 8179 10179 12179.1 8.4179.2 5.7179.3 5.7179.4 3.1179.5 2179.5 3179.5 5179.5 8.4180 1.5180 2180 3180 3.1180 3.5180 3.55180 4180 4.2180 4.5180 4.76180 5180 5.3180 5.4180 5.5180 5.7180 5.8180 6180 7180 7.5180 8180 9180 10180 10.2180 14180 15180 16180 17180 20180.34 1.78180.37 2.39181 2181 3181 3.5

181 4181 5181 6.99181 7181.4 4.3181.48 5.33181.5 2.5181.5 16181.8 2.4182 1.78182 2182 3182 3.5182 4182 5182 6182 7182 8182 8.3182.3 7182.5 4183 3183 3.5183 4183 5183 6183 7183 9183 10183.33 2.62183.5 3183.52 5.33183.52 6.99183.74 5.33183.75 3.53183.83 2.62184 1.5184 1.78184 2184 2.5184 3184 3.5184 4184 5184 5.7184 6184 6.4184 6.5184 7184 8184 8.4184 10184 12.7184 15184.1 8.4184.15 6.35184.2 5.7184.3 5.7184.5 3184.5 8.4185 1.5185 2185 2.5185 2.62185 3185 3.1185 3.2185 3.25

185 3.5185 3.55185 4185 4.2185 4.5185 5185 5.3185 6185 6.5185 7185 7.5185 8185 8.5185 9185 10185 15185.34 3.5185.4 5.33185.5 8.5186 3186 3.5186 4186 4.5186 5186 6186 7186 8186 9.5186.5 3.53186.5 8.5187 3187 3.5187 3.53187 4187 5187 5.33187 7187.3 6.99187.5 4187.5 6187.5 15187.62 2.62187.7 1.7187.7 4 3.53188 1.5188 2188 3188 3.5188 4188 5188 6188 6.5188 7188 8188 10188 12188 15188.1 2.5188.5 9189 2.6189 3189 3.5189 4189 4.5189 5189 6189 8.4189.1 8.4

189.2 5.7189.3 5.33189.3 5.5189.3 5.7189.5 2.5189.5 3189.5 4.5189.5 8.4189.6 5189.8 2.5189.86 7.06189.87 5.33189.87 6.99190 2190 2.5190 2.6190 2.65190 2.7190 3190 3.1190 3.2190 3.5190 3.55190 4190 4.5190 5190 5.3190 5.5190 5.8190 6190 6.3190 6.5190 7190 7.5190 8190 8.5190 9190 10190 12190 13190 14190 15190 20190 25190.1 3.53190.18 2.62190.5 3.17191 3191 3.5191 4191 5191 5.5191 6191 7191 7.5191 8191 14191.1 6191.2 6192 2192 2.5192 3192 3.5192 4192 4.5192 5192 6192 6.1

49

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

192 7192 8192 14192.22 6.99193 1.5193 2193 2.62193 3193 3.5193 4193 5193 6193 6.5193 7193 16193.5 4193.5 5193.5 5.33193.7 6.99194 2194 2.2194 2.5194 3194 3.5194 4194 5194 5.33194 6.1194 7194.1 8194.1 8.4194.2 5.7194.3 3.1194.3 5.7194.44 2.53194.5 2194.5 3194.5 8.4194.7 5.3195 2195 2.5195 3195 3.5195 3.55195 3.75195 4195 5195 5.3195 5.5195 5.9195 6195 7195 7.5195 8195 8.6195 9195 10195 15195 16195.5 5196 3196 3.5196 4196 4.5196 5196 6196 7196 8

196 10196.22 1.78196.22 5.33196.22 6.99196.22 8196.44 3.53196.44 6.35196.53 2.62196.9 3.2197 3197 3.5197 4197 5197 8197.15 3.53198 3198 3.5198 3.8198 4198 5198 6198 6.5198 7198 7.5198 8198 9.5198 10198.5 3198.7 10199 3199 3.5199 4199 5199 7199 11199.1 8.4199.2 5.7199.2 7199.3 3199.3 5.7199.5 3199.5 8.4199.8 6.99200 1.5200 1.6200 1.78200 2200 2.5200 2.62200 2.8200 3200 3.2200 3.5200 3.55200 4200 4.2200 4.5200 5200 5.3200 5.5200 5.6200 6200 6.3200 6.5200 7200 8200 8.35200 8.6

200 10200 10.2200 11200 12200 15200.5 8.4200.7 6.99201 3201 3.5201 4201 5201 6201 8201 9201 10201 11201 12202 2202 3202 3.5202 3.6202 4202 5202 5.5202 6202 7202 8202 12.5202 12.7202 18202.57 5.33202.57 6.99202.79 3.53202.87 2.62203 3203 3.5203 4203 5203 6203 6.35203 7203 12203 15203.5 4203.5 6204 2.5204 3204 3.5204 4204 4.5204 5204 6204 7204 8204 8.4204 15204.1 8.4204.2 5.2204.2 5.7204.4 14204.5 3204.5 8.4204.7 3.5205 1.5205 2205 2.5205 3205 3.5

205 3.6205 4205 4.5205 5205 5.33205 5.5205 6205 7205 7.5205 8205 9205 11205 15205 20205.3 6205.87 11.1206 3206 3.5206 4206 5206 5.3206 5.7206 6.99206 7206 8206 10206 12206 14206 15206.5 3.53207 3207 3.5207 4207 4.5207 5207 5.7207 7207 9207.5 5.5207.5 7.5208 3208 3.3208 3.5208 3.6208 4208 4.5208 5208 5.5208 6208 6.65208 7208 8208 8.5208 9208.5 3.5208.5 8.4208.92 5.33208.92 6.99209 1.78209 3209 3.5209 4209 5209 5.3209 7209.1 8.4209.14 3.53209.2 5.7

209.23 2.62209.3 5.7209.5 3209.5 6209.5 8.4209.55 6.35210 1.5210 1.8210 2210 2.5210 3210 3.1210 3.5210 4210 4.5210 5210 5.5210 6210 6.4210 6.5210 7210 7.5210 8210 8.6210 9.5210 10210 11210 12210 13210 20211 3211 3.5211 4211 5211 5.7211 12211.5 5.7212 1.78212 2.5212 2.75212 3212 3.15212 3.5212 3.55212 4212 5212 5.3212 5.7212 6212 6.3212 6.5212 7212 8212 10212 12212.4 7.3212.5 4.5212.5 15212.6 2.18213 2.4213 3213 3.5213 4213 5213 5.4213 8.5213.91 6.35214 2

214 2.5214 3214 3.5214 4214 4.5214 5214 5.5214 6214 7214 12214 20214.1 8.4214.3 5.7214.5 3214.5 7214.5 8.4215 2.2215 2.5215 3215 3.5215 4215 4.5215 5215 5.3215 5.5215 5.7215 6215 6.4215 6.5215 7215 7.5215 8215 10215 13.5215 20215.17 2.62215.27 2.62215.27 5.33215.27 6.99215.49 1.78215.49 3.53215.58 2.62215.65 1.59215.67 5.33215.9 1.78215.9 6.35216 2216 3216 3.5216 4216 5216 6216 6.99216 8216.5 2.5216.65 1.9216.65 2.7217 1.78217 3217 3.5217 4217 5217 5.2217 6217 7217 7.5217 8217.5 2.5

50

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

218 2218 2.2218 3218 3.5218 3.55218 3.6218 4218 4.2218 4.5218 5218 5.3218 5.33218 5.8218 6218 6.35218 7218 7.2218 8218 10218 12218 19218.19 3.53218.4 4.18218.5 4.5218.5 5.8218.7 2219 3219 3.4219 3.5219 4219 4.5219 5219 8.4219 16219.1 8.4219.2 5.7219.3 5.7219.49 3.53219.5 3219.5 5.33219.5 8.4220 2220 3220 3.5220 4220 4.5220 5220 5.33220 5.7220 6220 6.5220 6.8220 7220 7.5220 8220 8.2220 8.4220 8.6220 10220 10.11220 14220 15220 16220 20221 3221 3.5221 4221 4.5

221 5221 6221 8221.5 5.7221.62 5.33221.62 6.99221.84 3.53221.93 2.62222 1.78222 2222 2.5222 2.62222 3222 3.2222 3.5222 4222 5222 5.5222 6222 6.5222 6.53222 7222 12222 12.7222.4 5222.5 3222.5 6222.94 2.6223 2223 3223 3.5223 4223 5223 6223 12223.3 5.7223.9 8.2224 3224 3.5224 3.55224 3.8224 4224 5224 5.3224 6.3224 7224 8.4224 10224.2 2.5224.3 3.1224.5 6.4224.5 8.4225 2225 2.5225 2.8225 3225 3.5225 3.53225 4225 4.5225 5225 5.2225 5.7225 6225 6.3225 6.5225 7225 8

225 10225 12225 15225 20225.2 5.7225.5 5226 2226 2.5226 3226 3.5226 4226 5226 6226 8226 10226 11226 12.7227 2227 2.5227 3227 3.3227 3.5227 4227 4.5227 5227 6.5227 7227 9227 10227 20227.97 5.33227.97 6.99228 2.5228 2.6228 3228 3.5228 4228 5228 5.7228 6228 7228 7.5228 8228 10228 20228.19 3.53228.28 2.62228.47 7.66228.6 6.35228.8 2.5229 3229 3.5229 4229 5229 6229 9229 12229.1 8.4229.2 5.7229.3 5.7229.5 3229.5 5229.5 8.4230 1.78230 2230 2.5230 3230 3.5

230 3.55230 3.8230 4230 4.5230 5230 5.3230 5.33230 5.5230 5.7230 6230 7230 7.5230 8230 8.72230 9230 10230 11230 15230 18230 20230.84 3.5231 3231 3.5231 4231 5231 8.4231 15231.78 11.11232 2.5232 3232 3.5232 4232 5232 6232 7232 8232 9.5232 9.52232 17232.2 3.6232.55 3.53233 3233 3.2233 3.5233 4233 5233 6.5233 7233 8234 2.5234 3234 3.5234 4234 5234 6234 6.5234 8234 8.4234 8.5234 10234 15234 16234.1 8.4234.22 5.33234.3 5.7234.32 5.33234.32 6.99234.5 3.3

234.5 5.33234.5 8.4234.54 3.53234.63 2.62234.82 2.62235 2235 2.3235 2.5235 3235 3.5235 4235 5235 5.33235 5.5235 6235 6.99235 7235 8235 8.5235 9235 10235 12235 15235 15.9236 3236 3.5236 3.55236 4236 5236 5.3236 6236 7236 12236 14236.55 4.33237 3237 3.15237 3.5237 3.53237 4237 4.2237 5237 5.5237 6237 7237 7.5237.2 2.2237.5 6238 2238 3238 3.2238 3.5238 3.6238 4238 5238 5.5238 5.7238 6238 6.3238 7238 8238 10238 12239 3239 3.5239 4239 5239 6

239 6.5239 7239 7.5239 8239 10239.1 8239.1 8.4239.1 10239.2 5.7239.3 5.7239.3 6.5239.3 7239.5 2.75239.5 3239.5 7.5239.5 8.4240 2240 2.5240 3240 3.5240 3.53240 4240 4.2240 4.5240 4.8240 5240 5.7240 6240 6.5240 7240 7.5240 8240 8.4240 8.6240 9240 10240 11240 12240 14240 15240 20240.1 3.9240.67 5.33240.67 6.99240.89 3.53240.98 2.62241 2.5241 3241 3.5241 4241 5241 5.3241 6241 6.4241 7242 3242 3.5242 4242 4.5242 5242 6242 6.5242 8242.02 5.33242.5 8242.5 10242.6 6243 2.93

51

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

243 3243 3.3243 3.5243 4243 4.5243 5243 7243 8.5243 17243.5 1.78243.5 6244 2244 3244 3.5244 4244 5244 5.5244 6244 7244 8244 9244 11244.1 8.4244.3 5.7244.5 8.4245 2245 2.5245 2.62245 3245 3.5245 4245 5245 5.34245 6245 6.5245 6.7245 7245 7.5245 8245 10245 11245 12245 15245.2 5.7246 2246 2.5246 3246 3.5246 4246 5246 6246 8246 9.5246 15247 2247 3247 3.5247 4247 5247 5.33247 6247 6.99247 7247 8247 10247 12247.02 5.33247.24 3.53

247.33 2.62248 2248 3248 3.2248 3.5248 4248 5248 6248 7248 8248 9248 10248 11248 12248 13248 15248.2 7.2248.5 7249 3249 3.5249 4249 5249 6249 7249 8249 8.4249.1 8.4249.1 8.5249.2 5.7249.3 5.7249.5 3249.5 8.4250 2250 2.5250 2.62250 3250 3.5250 3.53250 3.55250 4250 4.5250 4.6250 5250 5.3250 5.33250 5.5250 5.7250 6250 6.3250 6.5250 7250 8250 9250 10250 12250 15250 18250 20250.5 9.5250.9 9.1251 3251 3.5251 4251 5251 7251 8251 12251.14 6.99

251.3 7252 2252 2.5252 3.5252 3.53252 3.6252 4252 5252 5.7252 6252 10252 15252.8 3.6253 3.5253 4253 5253 5.34253 7253 8253 12253.3 6.99253.37 5.33253.4 7253.5 3.53253.57 5.33253.57 6.99253.59 1.78253.59 3.53253.77 7253.8 14253.97 6.99254 3254 3.5254 4254 5254 6.35254 8254 10254.1 1.9254.3 5.7254.5 3254.5 4.52254.5 8.4254.7 8255 2255 2.5255 3255 3.5255 3.53255 4255 4.2255 5255 5.7255 6255 7255 8255 10255 20255.5 10.2256 2256 2.5256 3.5256 4256 5256 7.2256 7.3256 7.5256 8

256 10256 12256.5 8.5257 3257 3.5257 4257 4.5257 5257.5 3257.8 2.62258 3258 3.5258 3.55258 4258 5258 6258 6.3258 7258 8258 9258 10258 12258 15258.5 3.5258.5 9259 2.62259 3259 3.5259 4259 5259 6259 8259 10259 18259.1 8.4259.2 5.7259.24 3.53259.26 2.62259.3 3259.3 5.7259.5 5259.5 8.4259.7 6.99260 2260 2.5260 3260 3.5260 3.53260 4260 4.1260 4.5260 5260 5.5260 6260 6.5260 6.99260 7260 8260 8.6260 10260 20260.5 3.3260.5 5.3261 3.5261 4261 5261 5.33261.5 8

262 2262 3.5262 4262 5262 5.25262 5.5262 6262 7262 8262 9262 10262 13262 14262.34 3.53262.5 5.5263 3.5263 4263 5263 6.5263.4 5263.5 7263.52 9.5263.7 8.6264 2.8264 3264 3.5264 4264 4.5264 4.6264 4.8264 5264 8264 8.2264 8.4264 18264.1 8.4264.2 5.7264.5 2.62264.5 8.4264.8 6.6265 2265 2.5265 3265 3.2265 3.5265 3.55265 4265 4.4265 5265 5.3265 5.33265 5.5265 5.7265 6265 6.5265 7265 8265 10265.5 2.5266 3.5266 4266 5266 5.7266 6266 7266 10266 19266.07 5.33

266.07 6.99266.1 10266.3 3.53266.5 3266.7 4.76266.7 6.35266.7 6.99267 2267 2.5267 2.7267 3267 3.5267 4267 4.5267 5267 6267 6.5267 7267 14267.5 5.5268 2.5268 3268 3.5268 4268 5268 6.8268 7268 8268 8.4268 10268.5 8.4268.8 8.4269 2269 2.5269 3269 3.5269 3.53269 4269 5269 5.5269 6269 6.9269 8269 9269.2 5.7269.24 5.33269.3 5.5269.3 5.7269.5 6269.5 8269.5 8.4270 2.2270 2.5270 3270 3.5270 4270 5270 5.3270 5.5270 6270 6.3270 6.5270 7270 7.5270 7.6270 8270 9270 10

52

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

270 12270 13270 14271 3271 3.5271 4271 5271 5.33272 2.5272 3272 3.5272 3.53272 4272 4.3272 5272 5.3272 7272.4 6.99272.4 7272.64 3.53272.97 5.55273 3.5273 4273 4.5273 5273 6273 7273 8273 12273 16274 2274 3274 3.5274 4274 5274 6.5274 8274 8.4274 8.6274.2 5.7274.3 3.1274.5 4274.5 8.4275 2.5275 3275 3.5275 4275 5275 5.15275 6275 7275 7.4275 7.5275 7.6275 8275 8.4275 10275 13275 14275.6 3.53275.8 8276 2276 2.15276 3276 3.5276 4276 5276 5.34

276 6276 6.4276 7276 8276 12276.43 2.62277 3277 3.3277 3.5277 4277 5277 6277 7.5277.8 2.62278 3278 3.15278 3.2278 3.5278 4278 5278 6278 8278 10278 12278.7 3.53278.7 5.7278.7 7.4278.77 5.33278.77 6.99278.89 3.53279 3279 3.5279 3.53279 4279 5279 6279 6.9279 7279 8.4279.1 8.4279.2 5.7279.3 3.17279.3 5.7279.4 6.35279.5 8.4280 2.5280 3280 3.5280 3.55280 4280 4.5280 5280 5.3280 5.33280 6280 6.3280 7280 8280 8.6280 9280 10280 12280 15280 16280 17280 20281 3.5281 4

281 4.5281 5282 3.5282 4282 5282 6282 8282 14282.17 3.53283 2283 3.5283 4283 5283 5.33283.18 6.99283.18 12.7283.5 9284 2.62284 3.5284 4284 5284 6284 8284 8.4284 9284 10284 12284 14284.2 5.7284.3 5.7284.3 6284.5 4284.5 8.4284.75 3.53285 2.4285 3285 3.5285 4285 5285 5.33285 6285 7285 8.4285 9.53285 10285 10.7285 15285 17285.1 6.99285.75 7.94285.87 3.53286 2.4286 2.43286 3.5286 4286 5286 5.5286 6286 6.2286 7286 8286 10286.8 8287 3.5287 4287 4.2287 5287 10

287 15287 20287.7 5.3288 2.62288 3.5288 3.53288 4288 5288 6288 7288 14288 18288.2 6289 3.5289 4289 5289 8.4289.2 5.7289.3 5.7289.5 8.4290 2290 2.5290 3290 3.5290 3.55290 3.75290 4290 5290 5.3290 5.33290 6290 6.5290 7290 7.5290 8290 9290 9.6290 10290 12290 15291 3291 3.5291 4291 5291 6.2291.4 3.53291.47 5.33291.47 6.99291.47 7.82291.7 3.53292 1.5292 2.65292 3292 3.17292 3.5292 4292 5292 5.7292 6292 7292 8292 9292 10292 20292.1 3.18292.1 6.35292.6 8.4292.79 3.53

293 2.5293 3293 3.5293 4293 5293 5.5293 6293 7294 2.7294 3294 3.5294 4294 5294 6294 11.5294 14294 17294 20294.2 5.7294.48 7294.5 6294.5 8.4295 2295 2.6295 2.9295 3295 3.5295 4295 5295 6295 7295 8295 10295 12295 15295 17295 20295.5 5295.5 8.4295.8 12.7296 2.5296 3296 3.5296 4296 5296 5.33296 8.4296 12297 2.4297 3297 3.5297 4297 5297 7297 8.8297.5 5297.57 5.7297.8 6.99298 2.4298 2.5298 2.53298 2.62298 3.5298 4298 5298 6298 7298 7.2

298 10298 11298 12298 15298.5 6.35298.5 9298.7 8.6299 2.62299 3.5299 4299 5299 8.6299.1 8.4299.2 5.7299.3 5.7299.5 8.4300 1300 2300 2.3300 2.5300 2.62300 3300 3.2300 3.5300 3.53300 3.55300 4300 4.5300 5300 5.3300 5.7300 6300 6.5300 7300 7.5300 8300 8.4300 8.6300 9300 10300 12300 12.5300 12.7300 15301 1.78301 3.5301 4301 4.5301 5301 6301.5 2.62302 3.5302 3.53302 4302 4.3302 5302 8302 8.4302 12.5303 3.5303 4303 5303 6303 9.5303.5 9304 3304 3.5304 4

53

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

304 5304 5.7304 6304 7304 8304 8.4304 9.53304.1 5.7304.17 5.33304.17 6.99304.2 5.7304.36 5.7304.39 3.53304.8 3.2304.8 6.3305 3305 3.5305 4305 4.5305 5305 5.3305 6305 6.35305 6.7305 7305 7.25305 7.5305 8305 8.5305 10305 20305.5 8306 3.5306 4306 5306 6306 6.3306 8306.4 2.62306.5 2306.8 10307 3.5307 3.55307 4307 5307 5.3307 6.8307 7307 8.4307 9307 9.2307 12307.57 3.53308 3308 3.5308 4308 5308 6308 7308 8308 9308.86 5.33309 3309 3.5309 4309 4.5309 5309.1 8.4

309.2 5.7309.5 4.5310 2310 2.5310 3310 3.5310 4310 4.5310 5310 5.7310 6310 6.5310 6.6310 7310 8310 8.4310 8.5310 9310 10310 12310 15310 16310.13 5.33310.5 6.99311 3.5311 4311 5311 6312 2.62312 3312 3.5312 4312 5312 5.3312 5.5312 6.3312 8312 10312 18313 3313 3.5313 4313 5313 7313 10313.26 2.62313.5 7314 2.62314 3314 3.5314 4314 5314 6314 7314 7.5314 8314 8.4314 8.6314 12314.3 5.7314.5 5.7314.5 8.4315 2.5315 3315 3.5315 3.53315 3.55315 4

315 4.5315 5315 5.3315 5.33315 6315 6.99315 7315 8315 10315 12315 15315 20315.6 6.99315.8 3.53316 2.62316 3.5316 4316 5316 7316 8316 9316 12316.26 2.62316.7 5.33316.87 6.99316.9 12.5317 3.5317 4317 5317 7317 9317.5 2.62317.5 6.35317.5 9.5318 2318 3318 3.5318 4318 5318 6.3318 14318.5 5319 3.5319 4319 5319 5.7319 7319 8.4319 10319.1 8.4319.2 3.53319.2 5.7319.3 5.7319.5 5.7319.5 8.4320 2320 2.5320 3320 3.5320 4320 5320 5.33320 5.5320 6320 6.5320 7320 8320 8.6

320 10320 12320 20320.5 14321 3.5321 4321 5321 5.33321 12.7321 13322 3.5322 4322 5322 8322 9322 13322.5 4322.86 8.02323 2.62323 3.5323 4323 5323 5.7323 7323 10323.2 6.99323.3 5.7323.7 8.6323.8 5324 3.5324 4324 5324 5.34324 6324 7324 8324 8.4324 9.53324 17324.1 8.4324.3 5.7324.5 7.5325 2.5325 3325 3.5325 3.52325 4325 5325 5.2325 5.3325 5.5325 6325 6.5325 7325 7.5325 8325 10325 11325 12.7325 16325.6 3.2326 3326 3.5326 4326 5326 5.5326 5.7326 8

326 11327 3.5327 3.53327 3.6327 3.7327 4327 5327 8327 14327.56 5.33328 2.5328 2.98328 3328 3.5328 4328 5328 6328 7.5328 10328 12328.5 6328.5 6.5328.6 8329 3.5329 4329 5329 8329.2 5.7329.3 5.7329.5 8.4329.57 5.33329.57 6.99329.8 3.53329.8 3.75330 2330 3330 3.2330 3.5330 4330 4.5330 5330 5.5330 5.7330 6330 6.5330 7330 7.5330 8330 8.4330 8.5330 8.75330 9330 9.53330 10330 13330 14330 15330 16330 20330.2 6.3330.2 6.35330.2 12.7330.3 12.5331 3331 3.5331 3.53331 4331 5

332 3332 3.5332 4332 5332 5.33332 6332 16333 3.5333 4333 4.5333 5333 6333 7333 8333 10333 12333.2 3.6334 2.5334 3.5334 4334 5334 8334.2 12.3334.3 5.7334.5 8.4334.7 8.6335 2.4335 3335 3.5335 3.55335 4335 4.5335 5335 5.3335 5.34335 6335 7335 7.5335 8335 8.4335 10335 20335.9 6.99336 3.5336 4336 5336 6336 7336 7.4336 8336 9.35336 9.53336 12336.5 5.5336.6 3.18336.6 5.8336.6 8337 3.5337 4337 5337 6337 8337.5 7338 3338 3.5338 4338 5338 6

54

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

338 6.3338 7338 9338 12338 13338.4 1.5338.4 1.6338.4 3.53339 3.5339 4339 5339 7339 8.4339 15339.2 5.7339.3 5.7339.5 8.4339.57 5.33339.6 3340 3340 3.5340 4340 4.6340 5340 5.33340 5.5340 5.7340 6340 6.4340 7340 7.2340 7.5340 8340 8.6340 9.3340 10340 11340 12340 16340.4 3340.4 6340.6 7.2341 3.5341 4341 5342 3342 3.2342 3.5342 4342 5342 6342 7342 7.5342 8342.27 5.33342.27 6.99342.3 12.5342.5 7.4342.9 3.53342.9 5.33343 3.5343 4343 4.5343 5343 6343 7343 10344 2.5

344 2.62344 3344 3.5344 4344 5344 5.7344 6344 8344 8.4344 9344 16344 20345 2345 3345 3.15345 3.5345 4345 5345 5.3345 5.33345 5.6345 5.7345 6345 6.5345 7345 8345 10345 20346 2346 3346 3.5346 4346 5346 6346 8346 9.4346 9.5347 3.5347 4347 5347 6347 7347 9347 18348 3348 3.5348 3.53348 4348 5348 6348 7348 8348 8.5348 11348 12348.4 3.53348.5 6349 2.5349 3349 3.5349 4349 5349 5.33349 5.7349 7.5349.1 8.4349.2 5.33349.2 5.7

349.5 2.5350 2350 2.5350 3350 3.5350 4350 4.5350 5350 5.2350 5.5350 6350 6.5350 7350 8350 9350 10350 11350 12350 13350 17350 20351 3.5351 4351 5351 7351 10352 3352 3.5352 4352 4.5352 5352 6352 8352 10352 12352.5 5.7353 2.62353 3353 3.5353 4353 5353 6353 7353 10353.37 3.53353.37 6.99353.7 8.6354 3354 3.5354 4354 5354 5.33354 7.5354 8354.07 5.33354.3 5.7354.5 8.4354.97 5.33354.97 6.99355 3355 3.5355 3.55355 4355 5355 5.3355 6355 7355 7.5

355 12355 15355 20355.2 3.53355.6 6.5355.6 6.99356 3.5356 4356 5356 8356.5 10357 2.62357 3357 3.5357 4357 5357 5.7357 7.5357 8357 12357.4 5357.4 5.7358 3358 3.5358 4358 5358 5.7358 6358 6.3359 3.5359 4359 5359 5.33359 7359 8359 8.4359.1 8.4359.2 5.7359.3 5.7359.5 8.4360 3360 3.5360 4360 5360 5.5360 5.6360 6360 6.5360 7360 7.5360 8360 8.6360 9360 10360 11360 12360 15361 3.5361 4361 5361 6362 3362 3.5362 4362 5362 7362 8362 12

363 3363 3.5363 4363 5363 5.34363 6363 8364 3.5364 3.53364 4364 5364 8.4364.2 5.7365 2365 3365 3.5365 4365 4.5365 5365 5.3365 5.75365 6365 7365 8365 8.5365 10365.1 8.4365.5 12.5366 2.5366 3.5366 4366 5366 7366 8366 9366.1 3366.54 3.53367 3367 3.5367 4367 5367 7367 7.5367 8367 20367.67 6.99367.9 5.5368 2.5368 3.5368 4368 5368 5.33368 6368 7368 8368 10368.3 4.5369 3.5369 4369 5369 9369.1 8.4369.3 5.7370 2.5370 3370 3.5370 4370 5

370 5.3370 5.5370 5.7370 6370 7370 7.5370 8370 8.4370 10370 11370 12370 14370 15370.75 14371 3.5371 4371 5371 8371 8.5372 3.5372 4372 5372 6372 8372 10372 12373 2373 2.4373 3.5373 4373 5373 7373 8373.5 5374 3.5374 4374 5374 5.7374 8374 9.52374 10374 16374.2 6.35374.5 8.4374.5 9.52375 2.5375 3375 3.4375 3.5375 3.55375 4375 5375 5.3375 6375 6.4375 7375 7.5375 8375 8.4375 9375 10375 11375 13376 3376 3.5376 4376 5376 6

55

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

376 8376 9.5376 12376 14377 3.5377 4377 5377 8377 10377 15377.5 10377.7 5.7378 3378 3.5378 4378 5378 6378 8378 8.6378 12379 3.5379 4379 4.5379 5379 6379.1 8.4379.2 5.7379.3 5.7379.8 7380 3380 3.5380 3.53380 4380 5380 5.5380 6380 6.2380 6.5380 7380 7.5380 8380 8.4380 9380 10380 14380 17380 20380.37 5.33380.37 6.99380.6 3.53381 3.5381 4381 5381 6.35381 11.11381.87 5.7382 3382 3.5382 4382 5382 8382 10382 16383 3383 3.5383 4383 5383 7.5

383 8.1383 8.4384 3.5384 4384 5384 8384 8.4384 9.52384 14.09384.5 8.4384.55 14.09385 3385 3.5385 4385 5385 6385 6.3385 7385 8385 8.6385 10385 12.5385 12.7385.5 6386 3.5386 4386 5386 6386 7.5386 14386.3 5.7386.5 5386.87 6.99386.94 3.53387 3387 3.5387 4387 5387 5.3387 6.4387 7387 8387 20387.35 6.73388 3.5388 4388 4.5388 5388 6388 7388 10389 3.5389 4389 5389 5.33389 5.7389 6389 8389.3 5.7389.3 8.5390 3390 3.5390 4390 5390 5.5390 5.7390 6390 6.3

390 6.55390 6.7390 7390 7.2390 8390 9390 10390 16390 18390.5 3.5391 3.5391 4391 5391 6.99392 3.5392 3.53392 4392 5392 5.33392 5.7392 6392 6.3392 8392.8 3393 3393 3.5393 3.53393 4393 5393 7393.07 6.99393.1 12.5393.45 6.3393.7 2.9393.7 3.5394 2.62394 3.5394 4394 4.8394 5394 6394 8394 8.4394 9394 15394.72 3.53394.97 5.33395 2395 2.5395 3395 3.5395 4395 5395 6395 7395 8395 10395 12395 14396 3.5396 3.55396 4396 5396 5.5396 10397 3.5397 4397 5

397 7397 8397 10397 13397.1 8.4397.51 9.53397.66 3.53397.7 5.7398 2.62398 3398 3.5398 4398 5398 6398 8398 10398 12399 3.5399 4399 4.1399 5399 6399.1 8.4399.2 5.7399.3 5.7399.42 5.33399.5 8.4399.5 8.5399.6 8.4400 2400 2.5400 3400 3.5400 4400 4.5400 5400 5.3400 5.5400 5.6400 6400 6.3400 6.5400 6.7400 7400 7.5400 8400 8.4400 8.5400 9400 10400 12400 15400 16401 3.5401 4402 3.5402 4402 4.5402 5.33402 6402 6.3402 9403 3403 3.5403 4403 6403 7403.4 5

404 3404 3.5404 4404 6404 6.5404 8404 12404.1 8.4405 3405 3.5405 4405 5405 6405 6.5405 7405 7.5405 8405 9.5405 10405 12405 15405 17405 20405.26 3.53405.26 5.33405.26 6.99405.26 7.5405.26 8405.3 9.5406 2.62406 3406 3.5406 4406 5406 10406.26 5.33406.4 3.17406.4 6.35406.4 6.5406.4 15.8407 3.5407 4407 5407 5.7407 6.3407 6.35408 3.5408 4408 5408 6408 6.3408 7.5408 8408 12408.3 9.5408.41 8409 3.5409 4409 10410 3410 3.5410 4410 4.5410 5410 5.7410 6410 6.3410 6.5

410 7410 8410 8.4410 9410 10410 12410 15410 20410.5 7411 3.5411 4411.48 5.33412 3.5412 4412 5412 7412 8412 9412 10412.7 5.6413 3.5413 4413 12413.7 5.33414 3.5414 4414 5414 5.33414 6.3414 8.4414 10414 12414 13414 16414.1 8.4414.3 5.7415 3415 3.5415 4415 4.5415 5415 5.5415 5.7415 6415 7415 7.5415 8.4415 15416 3.5416 4416 6416 16417 3.5417 3.53417 4417 8417.5 5.33417.9 7417.96 4417.96 6.99418 3.5418 4418 5.7418 7418 8419 3.5419 4419 6

56

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

419 7419 8.4419 14419.1 6.35419.1 8.4419.2 5.7419.3 5.7419.5 8.4419.7 6.35420 2.5420 3420 3.5420 4420 5420 5.33420 5.5420 6420 6.5420 7420 8420 9420 10420 12.7421 3.5421 4421 5421 5.2421.5 2.65422 2422 3422 3.5422 4422 5.7422 6422 6.9422 7.5422.2 6.2422.2 6.9423 3.5423 3.53423 4423 6423 9423 10424 3424 3.5424 4424 5424 7424 8.5424 9.52425 3425 3.5425 4425 5425 5.33425 5.5425 6425 6.5425 7425 8425 8.4425 8.5425 16425.45 3.97425.45 9.52426 3.5426 3.53

426 4426 5.7426 6426 17427 3.5427 4427 5427 5.5427 10427 20428 2.62428 3.5428 4428 6428 8429 3.5429 4429 5.7429 6430 3430 3.5430 4430 5430 5.7430 7430 7.5430 8430 9430 10430 12430 13430 15430 17430 20430.5 5.33430.66 3.53430.66 5.33430.66 6.99431 3.5431 4431 8431 8.4431.3 8.4431.8 3.17431.8 6.35432 3.5432 4432 5432 10433 3433 3.5433 4433 4.5433 7433.36 6.99433.5 5.5434 3.5434 4434 5434 7434 8434 10434.5 8.4434.9 8.25435 3435 3.5435 4435 5

435 5.7435 6435 7435 8435 8.5435 12435 14435 15.2435 20436 3436 3.5436 4436 7437 3.5437 4437 6437 7438 3438 3.5438 4438 6438 7.5438 12438 12.7438 14438.1 3.5439 3439 3.5439 4439 5.7439 6439 7439.1 8.4439.2 5.7439.3 5.7439.34 5.33439.5 4439.5 5.7440 2440 2.5440 2.8440 3440 3.5440 4440 4.2440 4.5440 5440 5.6440 6440 6.3440 7440 8440 8.5440 9440 10440 14440 15440 16440 20440.69 2.62440.69 5.33441 2.5441 4441 5441 8442 4442 6442 12

443 4443 7443.36 6.99444 3444 4444 5444 6444 8444 8.4444.2 5.7445 3.53445 4445 5445 5.7445 6445 7445 8445 9445 12445 15446 4446 5.33446 6446 8446 10446 14447 4447 8448 3448 4448 5448 6448 8448 10448 14449 4449 6449 6.99449.1 8.4449.2 6.3449.3 5.7449.8 6449.8 6.2450 3450 4450 5450 6450 6.3450 6.5450 7450 8450 8.6450 10451 4451 7451 9451 10452 4452 5.33452 6452 8452 12452.4 9453 3.5453 4453 5.7453 6453 6.35

453 6.4453.3 5.7454 4454 5454 8454 9.5454 10455 3455 4455 5455 6455 6.2455 7455 8.4455 13456 4456 7456 7.5456.06 3.53456.06 5.33456.06 6.99457 3457 4457 6.35457 7457 8457 8.4457 9457 9.52457.2 7458 4458 6458 9458 10458 12458.5 10459 4459.2 5.7459.3 5.7460 3460 4460 5460 6460 6.5460 7460 7.4460 8460 8.2460 8.4460 8.5460 10460 12461 4461 5461 7461 8.4461 8.6461.4 8.6462 3462 4462 5.33462 7462 10462 13462 15462.1 8.4463 4463 8

463 9.5463.55 7463.55 12.7464 3.5464 4464 6464 7.5464 8464 9465 3465 4465 5465 6465 7465 8.4465 9465 10465.3 5.7466 4466 5466.72 6.35467 4467 5.7467 7.8467 8.4467 10468 3.53468 4468 6468 6.3468 7468 8468.76 6.99468.9 6.35469 3469 4469 4.77469 5.7469 6.35469 7469.3 5.7469.5 6.4469.9 6.35469.97 4.77470 2.5470 3470 3.5470 4470 4.5470 5470 5.2470 5.3470 5.33470 5.5470 5.7470 6470 7470 8470 9.5470 10470 12470.4 5.7470.4 6471 4471 9471 10472 3.53472 4

57

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

472 5472 5.7472 8472 10473 4473 6.5473 7.5473.6 5.7474 3474 3.53474 4474 12474.3 5.7474.5 8.4475 3475 4475 5475 6475 7475 8475 10475 15475.08 8.74475.4 5476 4476 4.5476 5476 5.5476 7477 4477 6.99477 8478 4478 5478 6478 8478 14478 17479 4479.2 5.7479.3 5.7479.42 4.75480 4480 5480 6480 7480 7.5480 8480 8.6480 9480 10480 12480 14480 16480 20481 3.55481 4481 5.33481 6481 7481 8481 8.4481.46 5.33481.46 6.99481.83 5.3482 3.53482 4482 5

482 5.34482 6482.6 6.35483 3483 4483 6483 7483 7.15483 8.4484 3484 4485 3485 4485 5485 8485 15485.3 4.8486 4486 6486 7486 12486 17486 20486.76 6.99487 4487 7487 8487 10488 4488 5488 6488 9488 10488.5 3489 3489 4489 6489.2 5.7489.87 6.99490 2490 4490 5490 5.33490 6490 6.35490 6.5490 6.7490 7490 7.5490 8490 8.4490 9490 10490 12490 12.7490 15490 16491 4491 5.33491.49 5.33491.5 4491.5 8.5492 4492 5.33492 6492 6.3492 8492 9

492 10492.13 5.33492.25 3.53493 4493 7493 12.7493.5 4494 4494 4.5494 5.34494 6494 7494 8494.1 5.7494.1 8.4494.16 6.5494.16 6.99494.5 8494.6 5.33494.67 7495 3495 4495 4.5495 5495 6.3495 7495 8495 8.4495 14495.3 6.35496 4496 6496 10496 12496.9 5.33497 4497 5.34498 4498 6.99498 8498.5 7.5499 4499 12499.2 5.7499.3 5499.3 5.7499.5 7499.5 8.4500 3500 3.53500 4500 5500 6500 6.3500 6.99500 7500 7.5500 8500 8.5500 9500 10500 12500 14500 15501 5501.65 3.53502 5.33502 8

502 8.2502 8.6502 16502.9 8.4503 6503 7.5503 10504 6504 8504.5 8505 2.62505 3505 4505 5.7505 6505 7505 8505 10506 3.5506 6506 7506 8506.81 5.33506.86 6.99506.86 8507 3507 4507 5507 8.5507 15507.5 5.3508 4508 6508 6.35508 8508 8.5508 10508 12508.74 4509 3.5509.1 8.4509.3 5.7509.4 6509.6 6510 3510 3.5510 4510 4.5510 5510 5.7510 6510 6.5510 7510 8510 8.5510 9510 10510 12510 16511.5 8512 3512 4512 6512 7512 7.6512 8512 10512 18

513 4513 5.66514 8514 8.4514 10514 14514.3 5.7514.6 5.33514.9 16515 3515 4515 5515 6515 7515 8515 10516 6516 8516 8.4516 12518 3518 6.4518 8518.5 3519 2.62519 6519 8519.3 5.7520 3.5520 3.53520 4520 5520 5.5520 6520 7520 8520 9520 10520 12520.06 6.99520.06 7520.5 9.98520.5 15520.7 6.35521 5.33522 3522 6522 7522 8522 8.4522 8.7522 9.5522 10523 5523 7524 3524.8 10525 2.62525 3525 4525 5525 5.7525 6525 7525 8525 9525 12525.9 13

526 3.5526 4526 20526.4 5.7527 4.7527 7528 3528 3.5528 8528 10528 10.82528 17528.5 10.82529 3529 5.34529.3 5.7530 3530 3.5530 4530 5530 5.33530 6530 6.5530 7530 8530 9530 9.5530 9.55530 10530 12531 7531 8532 4532 6.5532 7532 8.4532 10532.2 5.33532.26 6.99533 6533 7533 8533.4 9.5534 4534 5.7534 16534.1 8.4534.5 8.4535 4535 5535 5.7535 7535 8535 10537 7537 8538 3538 6538 7538 8538 8.4538 12538.5 8539 3.5539 7540 3540 4540 4.5

58

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

540 5540 5.7540 6540 6.5540 7540 8540 10540 12540 20541 14542 7542 8542 10542.9 8.4543 3.5544 6544 6.5544 8544 16544.3 5.7545 3545 4545 5545 5.7545 7545 8545 9545 12545 15545.47 6.99546 8546 14546 15546.1 6.35547 8547 14547.6 9.5548 3.5548 5.7548 6.5549 3549 6549 9.52550 3550 4550 5550 5.5550 6550 7550 8550 9550 10550 13550 14550 16552 2.62552 4552 5.33552 6552 6.3552 8553 8553 8.4553.34 6.99554 3.8554 4554 5554 5.33

554 7554 10554 12554.3 5.7555 3.53555 5555 6555 6.2555 6.35555 7555 9555 10555 11.5555 12556 8556 10556 18557 5.33557.61 5.33557.66 6.99558 3558 4558 5.7558 6.3558 7558 10558.5 8.5558.8 4559.1 6.35559.6 12560 3560 4560 4.35560 4.5560 5560 6560 6.3560 7560 8560 8.2560 8.4560 9.6560 10560 12561 5561 8561 8.5561.5 8.5561.5 9562 4562 7.5563 3563 7564 5.33564 6564 8565 5565 5.3565 5.7565 6565 7565 8565 8.4565 10565.9 7566 6.35566 9567 3

567 20567.4 5.33568 4568 4.4568 4.5568 5568 6568 7568 8568.5 10568.6 8.4569 6569 7569.27 6.99569.6 8.7570 3570 3.53570 4570 5570 5.7570 6570 7570 8570 8.4570 9.5570 10570 12570.65 8.4571 5571 6.35571 10571.5 5571.5 6.35572 4572 5.33572 10572.4 9574 5.34574 7574 10575 5575 6575 6.5575 7575 8576 6576 7576 8577 7577 20577 21577.85 6.99578 12578 17579 6579 8579.3 5.7580 3580 3.53580 4580 4.5580 5580 5.33580 5.7580 6580 7580 8580 9

580 10580 12580 18581 3.53581 16582 7582 8582 12582 12.7582 14582.68 5.33582.68 6.99583 6.7583 7583 12584 6.5584 7584 8.4584 20584.1 8.4584.2 9.52585 4585 5585 6585 6.3585 7585 7.5585 8585 9.55585 10585 16586 5.7586 6586 7586 7.5586 8586.5 10587 6587 10588 6588 6.3588 6.35588 7588 8.4589 3.53589 5589 10589 12590 3590 3.53590 4590 4.5590 5590 6590 7590 8.5590 9590 15590 15.88590 16591 8592 8592 8.6593 4594 5.7594 8594 15594.51 7.14

595 5595 6595 8595 10595 12595 14595 16596 7596 8596 9596.27 6.99596.6 16596.75 5597 4.48597 4.5597 7597.03 5.33598 5.5598 6598 8598 12599 7.3599.3 5.7599.4 7.3599.6 14.4600 3600 3.53600 4600 5600 5.7600 6600 6.5600 7600 8600 8.2600 9600 10600 11600 12600 16601 7.5601.5 9.5603 10604 7605 5605 5.7605 8.4605.9 6.35606 3606 3.53607 3607 5607 7608 6608 6.4608 7608 8.4608 9608 10608 11608.08 5.33608.08 6.99608.5 10608.8 5.33608.88 6.99608.9 9609 8609.5 8

609.6 12.7610 3.5610 4610 5610 5.33610 5.7610 6610 6.35610 6.4610 6.5610 7610 7.5610 8610 10610 12610 16612 4612 7612 8612 10613 5.33613 5.7613 6.35614 7615 5615 5.3615 5.8615 6615 7615 8.4615 10615 12616 6616 15.6617 7618 3618 7618 8618 12.7618 14618 18619 7620 4620 5620 6620 7620 8620 9620 10620 12620 15621 7621 8621 9622 5.33622 7622 8622 9622.3 5.7622.3 15.88623 8623 9624 5624 5.4624 6.99624 8624 17625 3

59

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

625 5625 5.33625 6625 6.35625 7625 8.4625 10626 7628 5628 7628 9.05628.5 7629 3629 5.7629 6629.3 5.7630 3.5630 4630 5630 6630 6.3630 7630 7.2630 8630 8.4630 10630.6 8.2631 9632 3632 8632 12633 6633 7633.48 5.33633.48 6.99634 6634 7635 5635 5.1635 5.7635 6635 6.35635 7635 7.3635 8635 8.4635 9.5635 10635 12.7636.9 3.53637 10638 4638 4.9638 6639 4640 3640 4640 5640 6640 6.3640 7640 8640 9641 8.6641.6 8.7642 3.53642 5.7642 8

643 5643 8.4643.9 8.4644 10644 11645 5645 6645 7645 8645 10646 8.4647.07 7647.7 5.33647.7 6.99648 5648 5.3648 6648 7648 8648 8.4648 15649 8.4650 3650 3.53650 4650 5650 5.7650 6650 6.7650 7650 8650 9.5650 10650 11650 12650 15650 20651 4651 7651.5 11.5652 6652 9.5653 4653 8654 6654 18655 4655.34 5.33656 6656 7.9656 8657 8.4658 5.7658 6658 7658 8.2658.54 5.33658.6 8.2658.88 5.33658.88 6.99658.9 7.3659 7659 9.52660 3660 3.5660 4660 5660 5.3

660 5.33660 5.7660 6660 7660 8660 9660 10660 12660 12.7660 13661 10661 14662 6.9662 8663 5.4663 6663 8.8664 10665 5665 5.33665 5.7665 6665 6.35665 7665 8.4665 12665 16665.18 5.33665.4 6666 9667 6667 7668 6668 7668 12669 13.2669 18669.5 5.6670 3670 4670 5670 6670 7670 8670 8.4670 10671 10671 15672 4672 10672 16673.1 3.53673.5 8.2674 5.7675 5.33675 7675 8675 15675.16 6.99676 8678 10.82679 5.33679.5 3.53679.5 5.33680 3680 4680 5680 5.33

680 6.3680 7680 7.3680 8680 8.2680 8.4680 9680 10680 11.5680 12680 15680.6 8.2681 7.5681 8.2682 6682 7.5682 8683 5683 8683 10684 6684 7685 3685 4685 5.34685 5.7685 6.3685 6.99685 7685 20686 3.5686 7686 8687 6.35687 7688 6690 3690 4690 5690 5.33690 6690 7690 7.5690 8690 8.4690 9690 10691 8692 5.34692 7694 6694 7694 10695 6695 8695 8.4695 10696 7697 4697 12698 7699 7700 3700 4700 4.15700 5700 5.3700 5.7

700 6700 6.3700 6.35700 7700 7.3700 8700 8.4700 9700 10700 12700 13700.4 14.8701.8 3.53701.8 7702 3702 8.6702 20702.66 5.33703 10704 10.8704.9 13.97705 5705 5.3705 5.33705 6705 7705 8705 14705.6 8.2707.54 6.99708 4708 6708 7710 3710 4710 5710 5.7710 6710 7710 8710 8.4710 9710 10710 12712 10712 11713 7714 8714.3 5715 5.7715 8715 8.4715 10716 5.3716 7717 10718 5.4718 6718 8718 9.5719 3719 6.9719 12719.3 5.7720 4720 5720 6720 6.3

720 6.5720 7720 8720 10720 12722 8722 16723 6723 7723.9 12.7724 5.7724 7724 12725 3.53725 4725 5725 5.33725 5.7725 6725 6.99725 7725 9725 10725 17726 7726 12726 13726.6 12727 8728.98 13.97729 7730 3.53730 4730 5730 5.7730 7730 8730 8.2730 8.4730 9730 10730 12730 16730.4 13.97730.5 7731 7731 10731.32 6.99731.52 7732 9732.4 8734 7735 5735 6735 6.35735 8736 5736 7736 9.5736.6 5.33736.6 6.99736.6 8736.6 9.52737 5.33737 7.3737 9.5738 10738 10.25

60

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

738.5 8.2739 3740 4740 5740 5.3740 6740 6.3740 6.35740 7740 8.4740 9740 10740 12740 20741.5 10742 7742 8.4742 10742 20742.9 6.99743 3.5743 7743 8743.3 5.7744 8745 6.35745 7745 8.4745 10748 3748 5.33749 3749 5.7750 3.53750 4750 5750 5.33750 6750 7750 7.5750 8750 8.4750 9750 10750 15751 7752 5752 6752 7752.5 8.4754 7754 8754.5 8.4755 5755 5.34755 7755 8.4756 7757 3757 7758 6758 8758 12758 12.7758.8 7758.83 13.97759 5.7760 5

760 5.33760 5.9760 6760 7760 8760 8.4760 10760 12760 14761 8762 5762 6.35762 15763 6.99763 7764.3 5.7765 7765 12766 5.33766 7767 10767 19768 8.4769.3 5.7770 4770 7770 8770 8.2770 8.3770 8.4770 10770.3 8.4771 8.5771.5 8.5774 8.4774 20774.1 8.4775 5.33775 8775 8.4775 16776 7778 3779 10779.46 5.33780 5780 5.7780 6780 7780 7.5780 8780 8.4780 9780 10780 11780 12780.47 5.34782 6.99782 9782 10783 10784 7784 8.5785 3785 5785 6.35785 7785 8

785 8.4785 10785 16785 20786 6786 7786 10787 7787 8.4788 6789 10.82790 5790 5.33790 5.7790 6.5790 8790 10790.3 8.4791 10792 8792 20793 12794 3.53794 7794 8.4795 5.33795 7797.3 5.7798 4.2798 5.7799 8.4799 12799.5 8.4800 3.53800 4800 5800 5.33800 5.7800 6800 7800 8800 8.4800 9800 10801 3802 15.6804 6.35804 8804.2 5.7805 5.33805 20806 6806 6.99806 10809 3.1809 5809.63 7810 6810 7810 8810 8.4810 9810 10813 12814 5.33815 5815 6815 8

815 10816 5817 8.4818 12819.3 5.7819.87 7820 3.53820 5820 5.33820 6820 6.3820 7820 8820 9820 10820 12820 20822 5822.5 8.4825 5.33825 8825 9825 10825 20826 6826 7828 6828 7829 8829 10830 4830 5830 5.33830 6830 7830 8.4830 9830 10831 3834 6.5834 10.5835 5.3835 5.34835 8835 10835 12836 5.7836 7837 9.5837 10838 5838 6838.2 9.52839 5.7840 4840 4.5840 5840 6.35840 7840 8840 9840 10840 12840 20840 25842 7843 7843 10

844 3844 7844.2 5.7845 2.5845 7845 8845 8.4845 10846 7846 8847 5.34850 3850 4850 5850 6850 7850 8850 8.4850 9850 10850 14.5850 15850 20853 5.33854 5.7854 7854 15.9855 6855 7855 8855 10858 16.5860 3860 5.34860 6.99860 7860 8860 10860 12860 20863 7864 3.2864 5864 10865 3865 6865 8865 8.4865 9865 10865 12865 14865.8 16.5867 7868 10869.3 5.7870 5870 6870 8870 10870 12872 5874 ! 3874.5 8.4875 4875 5.33875 6.99875 8

875 10876 7880 5880 7880 8880 8.4880 10881 7882 3882 6.35882 7882 10882.6 6.35883 3883 12885 4885 5.5885 8885 8.4886 7887 7888 8.4889 8889.2 5.7890 3.53890 5890 5.3890 5.34890 5.7890 6891 17892 8894 3.53894 12894 13894 14895 3.53895 4895 6895 8895 8.4895 12900 5900 5.33900 6.35900 7900 7.5900 8900 9900 10902 4902.6 3904 6.99904 7905 3.53905 10906 7907 5.33910 5910 6.5910 8910 8.4910 10910 12913 6914 3.2914 9.52914.4 6.35

61

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

914.4 9.52915 6915 8.4915 10916 7918 5.7918 6918 12920 4920 6920 7920 8920 8.5920 10920 12922 7925 5.33925 7925 8925 10926 5.34927 3927 6927 8930 5930 6930 7930 9930 10932 12932.54 6.99933 7934 8.4935 8935 10935 20936 9.52936 10938 7939.3 5.7940 5940 6940 6.35940 10940 12941 3944 7945 7945 10950 3950 5950 6950 7950 8950 10950 20952 7952.5 7953 7954 4955 9955 10956 3.53956 7957 3957 5.34957 7957 20

958 10959 8.4960 7960 8.4960 10961 12963 6.35963 10964.3 5.7965 5965 7965 7.14965 8965 10968 7968 12969 6970 5.33970 7970 10975 5975 5.33975 6975 6.99975 7975 8977 7980 5980 8980 9980 10980 12980 16.5981 11982 3983 7984 3985 8.4985 16987 8987 10988 5.33988 7990 6.35990 8990 9990 12992 8995 71000 31000 61000 71000 81000 8.41000 101000 121000 151002 3.531003 6.991003.6 8.41005 61005 9.521005.85 9.521006 5.331010 3.531010 51010 5.31010 6.99

1010 71010 81010 91010 101012 91013 61013 71014 5.341014 81014 8.41014 9.51015 81016 6.351016 71016.4 121017 51019 5.71020 41020 81020 101023 71023 151024 71025 5.331025 121026 31026 6.991027 121029 6.351030 5.71030 81030 91030 101030 131030 13.71030 141033 121035 101036 91038 101040 5.331040 71040 101044 81045 5.331045 5.71046 71046 121047 14.81050 71050 81050 91050 101051 5.341052 61054 101056 121057 51060 5.341060 81060 8.41060 101060 111062 5.51062 61065 8.41065 101066 5.33

1067 161068 81070 71070 121071 61071 71075 5.331075 5.71075 8.41075 201077 6.991080 5.331080 71080 81080 91080 101082 51082 5.341085 71085 121088 121090 61090 6.991090 81090 91090 101090 121094.3 5.71095 41095 81098 6.351100 51100 61100 71100 8.41100 91100 121100 201102 5.331108 101110 3.531110 6.991110 91112 71112 8.41113 71114 8.41116 121120 4.761120 6.351120 6.991120 8.41120 101122 51125 5.331125 81125 14.81125 151127.6 8.41129 5.71130 51130 5.71130 71130 81130 91130 101134 8.41135 5.34

1135 81139 5.371140 71140 121142 71142 81143 6.351145 8.41145 101145 19.81150 41150 71150 81150 8.41150 101150 161151 121155 6.351157 5.331160 5.71160 81160 91160 101164.5 5.331165 101170 5.51170 71170 101172 51172 5.71175 51175 151180 71180 81180 8.41185 71185 81185 121190 71192 101195 81209 6.351210 81220 51220 101225 81226 71230 71235 151240 8.41240 101246 81250 101260 51260 6.351260 101260 121265 71268 51270 61270 101280 101286 141290 71290 101295 151300 61300 10

1300 151305 81307.5 61320 71320 81320 101325 101340 81350 61350 101350 121368.42 6.991370 51370 101375 61380 7

62

X-rings are four lipped seals with especially developed sealing profile. They are characterized by their annular form with a fourlipped profile. Their dimensions are specified with the inside diameter and the cross-section

Standard materialNBR70 FKM70

The choice of a suitable material is determined by the temperature, pressure and media.

MediaDepending on material: different liquids, gases and chemicals.

Function X-rings are self energizing double-acting sealing elements. The forces acting in radial or axial direction due to the installation give them its initial squeeze.

area of applications X-rings can be used for a wide range of different applications. They are used predominantly for dynamic sealing functions.

Dynamic applications For sealing of reciprocating pistons, rods, plungers For sealing oscillating or rotating movements

Static applications As a radial-static seal As an axial-static seal As an energizer element for elastomer energized hydraulic seals

Operational application limits Working pressure, dynamic application Reciprocating up to 5 MPa ( 50 bar) without Back-up Ring up to 30 MPa (300 bar) with Back-up Ring

Rotating up to 15 MPa (150 bar) with Back-up Ring

Working pressure, static application up to 5 MPa (50 bar) without Back-up Ring up to 40 MPa (400 bar) with Back-up Ring

Speed Reciprocating: up to 0.5 m/s Rotating: briefly up to 2.0 m/s

Operating temperature range NBR: -30°C to + 100°C FKM: - 18°C to + 200°C

X-ringS

63

Dimensions

d1 d2 d1 d2 d1 d2 d1 d2 d1 d2 d1 d2

1.78 1.782.57 1.782.9 1.783.68 1.784.48 1.784.62 1.785.28 1.785.7 1.786.07 1.786.65 1.788.2 1.789.25 1.789.7 1.7810.82 1.7812.42 1.7814 1.7815.6 1.7817.16 1.7818.77 1.7820.35 1.7821.95 1.7823.53 1.7825.12 1.7826.7 1.7828.3 1.7829.87 1.7831.47 1.7833.05 1.7834.65 1.7837.82 1.7841 1.7844.17 1.7847.35 1.7850.52 1.7853.67 1.7856.87 1.7860.04 1.7863.22 1.7866.4 1.7869.57 1.7872.76 1.7875.92 1.7882.28 1.7888.62 1.7894.97 1.78101.34 1.78107.7 1.78114 1.78120.4 1.78126.76 1.78133.07 1.782.06 2.622.84 2.623.63 2.624.42 2.625.23 2.626.02 2.629.19 2.629.8 2.6210.2 2.6210.78 2.6211.7 2.6212.37 2.6212.8 2.6213.95 2.6214.7 2.6215.54 2.6216.2 2.62

17.13 2.6217.75 2.6218.72 2.6219.6 2.6220.29 2.6221.89 2.6223.47 2.6225.07 2.6226.64 2.6228.25 2.6229.82 2.6231.42 2.6234.59 2.6236.17 2.6237.77 2.6239.34 2.6240.95 2.6242.52 2.6244.12 2.6245.69 2.6247.29 2.6248.9 2.6250.47 2.6252.07 2.6253.65 2.6255.25 2.6256.82 2.6258.42 2.6260 2.6261.6 2.6263.17 2.6264.77 2.6266.35 2.6267.95 2.6269.52 2.6291.12 2.6272.69 2.6275.87 2.6282.22 2.6288.57 2.6294.93 2.62101.27 2.62107.63 2.62113.98 2.62120.33 2.62126.67 2.62133 2.62139.38 2.62145.72 2.62152.07 2.62158.41 2.62164.78 2.62171.13 2.62177.47 2.62183.83 2.62190.18 2.62196.53 2.62202.87 2.62209.23 2.62215.58 2.62221.93 2.62228.28 2.62234.63 2.62240.98 2.62247.33 2.625.94 3.539.12 3.5310.69 3.53

12.29 3.5313.87 3.5315.47 3.5317.04 3.5318.2 3.5318.64 3.5320.22 3.5320.9 3.5321.82 3.5323.4 3.5323.99 3.5324.99 3.5325.9 3.5326.58 3.5327.57 3.5328.17 3.5329.75 3.5331.34 3.5332.04 3.5332.06 3.5332.92 3.5333.8 3.5334.52 3.5336.1 3.5337.69 3.5340.87 3.5344.04 3.5347.22 3.5350.4 3.5353.57 3.5356.74 3.5359.92 3.5363.09 3.5369.44 3.5372.62 3.5375.8 3.5378.97 3.5382.14 3.5385.32 3.5388.5 3.5391.67 3.5394.84 3.5398.02 3.53101.2 3.53104.37 3.53107.54 3.53110.72 3.53113.9 3.53117.07 3.53120.25 3.53123.42 3.53126.6 3.53129.77 3.53132.94 3.53136.12 3.53139.3 3.53142.47 3.53145.65 3.53148.82 3.53151.99 3.53158.35 3.53164.7 3.53171.05 3.53177.4 3.53183.75 3.53190.1 3.53196.44 3.53202.79 3.53

209.14 3.53215.49 3.53221.84 3.53228.19 3.53234.54 3.53240.89 3.53247.24 3.53253.59 3.53266.3 3.53279 3.53291.7 3.53304.39 3.53329.8 3.53355.2 3.53380.6 3.53405.26 3.53430.66 3.53456.06 3.5310.46 5.3312.07 5.3313.64 5.3315.24 5.3316.81 5.3318.42 5.3319.99 5.3321.59 5.3323.17 5.3324.77 5.3326.34 5.3327.93 5.3329.51 5.3331.12 5.3332.69 5.3334.29 5.3337.47 5.3339.2 5.3339.64 5.3340.65 5.3341.8 5.3343.82 5.3345.04 5.3345.2 5.3347 5.3347.8 5.3349.2 5.3350.16 5.3352 5.3353.34 5.3354.5 5.3356.52 5.3357.52 5.3359.7 5.3361.54 5.3362.87 5.3364.59 5.3366.04 5.3367.64 5.3369.22 5.3370.64 5.3372.4 5.3373.84 5.3375.57 5.3378.74 5.3380.09 5.3381.92 5.3383.39 5.3385.09 5.3386.64 5.33

88.27 5.3389.59 5.3391.44 5.3394.62 5.3397.8 5.33100.97 5.33102.34 5.33104.14 5.33105.8 5.33107.32 5.33110.49 5.33113.67 5.33116.84 5.33120.02 5.33123.2 5.33126.37 5.33129.54 5.33132.72 5.33135.9 5.33139.07 5.33142.24 5.33145.42 5.33148.6 5.33151.77 5.33158.12 5.33164.47 5.33170.82 5.33177.17 5.33183.52 5.33189.87 5.33196.22 5.33202.57 5.33208.92 5.33215.27 5.33221.62 5.33227.97 5.33234.32 5.33240.67 5.33247.02 5.33253.37 5.33266.07 5.33278.77 5.33291.47 5.33304.17 5.33329.57 5.33354.97 5.33380.37 5.33405.26 5.33430.66 5.33456.06 5.33481.46 5.33506.81 5.33532.2 5.33557.61 5.33582.68 5.33608.08 5.33633.48 5.33658.88 5.33113.67 6.99115.84 6.99116.84 6.99120.02 6.99123.2 6.99126.37 6.99129.54 6.99132.72 6.99135.9 6.99139.07 6.99

142.24 6.99145.42 6.99148.6 6.99151.77 6.99155.02 6.99158.12 6.99161.02 6.99164.47 6.99167.02 6.99170.82 6.99177.17 6.99183.52 6.99189.87 6.99196.22 6.99202.57 6.99215.27 6.99227.97 6.99240.67 6.99253.57 6.99266.07 6.99278.77 6.99291.47 6.99304.17 6.99316.87 6.99329.57 6.99342.27 6.99354.97 6.99367.67 6.99380.37 6.99393.07 6.99405.26 6.99417.96 6.99430.66 6.99443.36 6.99456.06 6.99468.76 6.99481.46 6.99494.16 6.99506.89 6.99532.26 6.99557.66 6.99582.68 6.99608.08 6.99633.48 6.99658.88 6.99

64

Bonded seals represent a combination of metal washer and elastomer sealing lip. Vulcanised to the edge of the metal part and was originally designed to replace cooper type washers in pressure systems.

MaterialsNBR FKM Metal- anti-corrosion plated

FunctionWhen the bolted connection is tightened, the sealing lip is pressed against the flat surfaces. The thickness of the metal ring limits the deformation of the elastomer seal. The internal pressure increases the sealing force by energising the sealing lip.

MediaMineral oils, water, water–oil emulsion, gases

Operational application limitsTemperature NBR -30 °C to + 100 °C FKM -18 °C to + 200 °C

Pressure Max pressure is depends on design, material and dimensions. Up to 250 to 2000 bar max. pressure.

The key benefitsReliable high and low pressure sealing Metal washer prevents over-compression and extrusion Re usable

BOnDeD SealS

BS US

BS USS

65

BS US BOnDeD SealS

Thread size M Dimensions in mm

Metric Inch B.S.P. Dowty ref. No. d D S

6BA 001 3.05 6.35 1.22

M3 301 3.60 7.50 1.00

M3.5 201 4.10 7.20 1.00

4BA 002 4.12 7.26 1.22

M4 202 4.50 7.00 1.00

M4 302 4.60 9.00 1.00

2BA 003 5.21 8.38 1.22

M5 303 5.60 10.00 1.00

M5 203 5.70 9.00 1.00

M5 204 5.70 10.00 1.00

M5.5 205 6.20 9.20 1.00

M6 304 6.60 11.00 1.00

M6 206 6.70 10.00 1.00

M6 207 6.70 11.00 1.00

M6 208 6.70 11.00 2.50

M6 305 6.85 13.27 1.301 ∕4 004 6.86 13.21 1.221 ∕4 005 6.99 13.34 1.22

M6 306 7.00 11.40 1.00

M6.5 209 7.10 12.00 1.00

M6.7 210 7.30 10.20 1.001 ∕16 519 8.30 12.70 1.25

5 ∕16 006 8.31 13.34 1.22

M8 211 8.50 13.40 1.00

M8 307 8.60 13.00 1.005 ∕16 007 8.64 14.22 1.22

M8 212 8.70 13.00 1.00

M8 213 8.70 14.00 1.00

M8 214 8.70 16.00 1.00

M8.5 215 9.30 13.30 1.00

M10 216 10.35 16.00 2.003 ∕8 1 ∕8 020 10.37 15.88 2.03

1 ∕8 510 10.40 14.70 1.25

M10 217 10.70 16.00 1.50

M10 310 10.70 17.00 1.50

M10 218 10.70 18.00 1.50

40 008 11.26 18.36 2.03

M11 219 11.40 16.30 1.507 ∕16 009 11.69 19.05 2.03

M11 312 11.80 18.10 1.50

M11 220 11.80 18.50 1.50

M11 221 11.80 19.10 1.50

M12 222 12.70 18.00 1.50

M12 313 12.70 19.00 1.50

M12 223 12.70 20.00 1.50

M13 224 13.70 20.00 1.50

M13 225 13.70 22.00 1.50

66

Thread size M Dimensions in mm

Metric Inch B.S.P. Dowty ref. No. d D S

1 ∕2 1 ∕4 021 13.74 20.57 2.03

M13 315 13.80 20.10 1.501 ∕4 511 13.85 18.70 1.25

M13.5 226 14.00 18.70 1.50

M14 316 14.70 21.00 1.50

M14 227 14.70 22.00 1.509 ∕16 010 14.86 22.23 2.03

60 022 15.83 22.23 2.03

M15 228 16.00 22.70 1.505 ∕8 011 16.51 25.40 2.03

M16 317 16.70 23.00 1.50

M16 229 16.70 24.00 1.50

M16.5 319 17.20 23.90 2.103 ∕8 023 17.28 23.80 2.033 ∕8 512 17.35 22.70 1.25

M17 230 17.40 24.00 1.50

M17.5 231 18.00 24.70 1.5011 ∕16 012 18.16 25.40 2.34

M18 232 18.70 26.00 1.50

M18 320 18.70 27.00 2.003 ∕4 024 19.69 26.92 2.34

M20 233 20.70 28.00 1.50

M20 321 20.70 29.00 2.00

M21 234 21.50 28.70 2.5013 ∕16

1 ∕2 025 21.54 28.58 2.341 ∕2 513 21.65 26.70 1.25

M22 235 22.50 28.00 1.50

M22 236 22.70 30.00 2.00

M22 237 22.70 30.00 3.00

M22 324 22.70 31.00 2.007 ∕8 5 ∕8 026 23.49 31.75 2.34

M23 325 23.70 32.00 2.0015 ∕16 013 24.26 33.27 2.34

M24 238 24.70 32.00 2.00

M24 326 24.70 33.00 2.00

M26 239 26.70 35.00 2.00

M26 327 27.00 35.30 2.00

1 3 ∕4 027 27.05 34.93 2.34

M27 240 27.20 36.00 2.003 ∕4 514 27.30 32.50 1.25

M27 328 27.70 36.00 2.00

11 ∕16 028 27.82 38.61 2.34

M28 329 28.60 36.00 2.00

M28 241 28.70 37.00 2.00

M28.5 330 29.20 37.50 2.00

11 ∕8 014 29.33 36.58 2.34

M30 331 30.70 39.00 2.00

13 ∕167 ∕8 029 30.81 38.10 2.34

M30 242 31.00 39.00 2.00

11 ∕4 015 32.64 41.40 3.25

M33 243 33.70 42.00 2.00

67

Thread size M Dimensions in mm

Metric Inch B.S.P. Dowty ref. No. d D S

M33 332 33.70 42.00 2.00

15∕16 1 031 33.89 42.80 2.34

15∕16 1 030 33.89 42.80 3.25

1 515 34.20 39.50 2.00

M33 244 34.30 43.00 2.00

13 ∕8 016 35.94 44.45 3.25

M36 245 36.70 46.00 2.00

M36 333 37.00 48.00 2.50

11 ∕2 017 38.96 47.75 3.25

M39 246 40.00 51.00 2.50

M39 334 40.00 51.00 2.50

M42 247 42.70 53.00 3.00

11 ∕4 516 42.80 49.50 2.00

15∕8 11 ∕4 032 42.93 52.38 3.25

M42 335 43.00 54.00 2.50

13 ∕4 018 45.34 57.15 3.25

M45 336 46.00 57.00 2.50

17 ∕8 11 ∕2 033 48.44 58.60 3.25

11 ∕2 517 48.70 55.50 2.00

M48 248 48.70 59.00 3.00

M48 337 49.00 60.00 2.50

2 019 51.69 63.50 3.25

M51 249 52.00 60.00 3.00

M52 250 53.30 64.50 3.00

21 ∕8 13 ∕4 034 54.89 69.85 3.25

21 ∕4 035 58.04 70.36 3.25

2 518 60.50 68.50 2.00

2 036 60.58 73.03 3.25

M60 251 60.70 73.00 3.00

21 ∕2 037 64.39 77.22 3.25

21 ∕4 038 66.68 79.50 3.25

M68 252 68.60 79.50 3.50

21 ∕2 039 76.08 90.30 3.25

M75 253 76.08 90.30 3.28

M88 254 89.09 101.48 3.25

M125 255 127.00 143.67 5.00

68

BS USSSelF-Centering BOnDeD SealS

Thread size M Dimensions in mm

Metric Inch B.S.P. Dowty ref. No. d D S

M8 866 8.70 14.00 1.001 ∕8 820 10.37 15.88 2.00

M10 708 10.70 16.00 1.50

M12 867 12.70 19.00 1.501 ∕4 821 13.74 20.57 2.00

M14 868 14.70 22.00 1.505∕8 869 16.51 25.40 2.00

M16 870 16.70 24.00 1.503 ∕8 823 17.28 23.80 2.00

11 ∕16 871 18.16 25.40 2.40

M18 872 18.70 26.00 1.50

M20 873 20.70 28.00 1.501 ∕2 825 21.54 28.58 2.47

M22 874 22.70 30.00 2.005∕8 826 23.49 31.75 2.47

M24 875 24.70 32.00 2.003 ∕4 827 27.05 34.93 2.477 ∕8 829 30.81 38.10 2.47

1 830 33.89 42.80 3.40

11 ∕4 832 42.93 52.38 3.40

11 ∕2 833 48.44 58.60 3.40

13 ∕4 834 54.89 69.85 3.40

2 836 60.58 73.03 3.40

21 ∕4 838 66.68 79.50 3.40

21 ∕2 839 76.08 90.17 3.40

HeaD OFFice18, Rozhen blvd.; 1220 Sofia, Bulgaria tel.: +359 2 8378 499, 8378 599 fax: +359 2 8376 599 office.sofia@hubata-seals.com

OFFice PlOVDiV8, Peshtersko shouse blvd.; 4002 Plovdiv, Bulgaria tel.: +359 32 640 654 fax: +359 32 640 654 office.plovdiv@hubata-seals.com

www.hubata-seals.com

SS.2011.09-02