state of art equipments purchased in teqip-ii · pdf file · 2016-08-02radiation...
TRANSCRIPT
Equipment Name: ABAQUS Simulia 6.12.3
software
Cost of the Equipment : Rs. 9.99206 (in lakhs )
Department: CIVIL Engineering ( Structural)
Purpose : Used for Finite element modeling and
simulating the behaviour of various
structural elements
*4 PG projects carried out
GOVERNMENT COLLEGE OF TECHNOLOGY, COIMBATORE
Equipment Name: TOC Analyser
Cost of the Equipment : Rs. 22.31250 (in lakhs )
Department: Civil Engineering (Public Health lab)
Purpose : To find total organic carbon and total nitrogen
concentration in solid & liquid samples
* Experiments were carried out in the following areas.
1. To find out Nitrogen, Carbon & Organic Carbon with
Sugarcane Baggase Hydrolysate.
2. To analyse total organic & inorganic carbon & total
nitrogen in tannery waste water.
Equipment Name: FTIR Spectrophotometer
Cost of the Equipment : Rs. 14.66054(in lakhs )
Department: Civil Engineering (Public Health lab)
Purpose : To identify unknown compounds
*utilised for PG project and Research work
Experiments are carried out in the following areas.
1. Analysis of Aluminium oxide + Carbon composites.
Sample 1 – Activated carbon + Aluminium acetate.
Sample 2 – Activated carbon + Alumina composite.
2.Molecular analysis of Hydrazinium pyromellitate &
Gadolinium hydrazine pyromellitate compounds.
Equipment Name: Light Weight Deflectometer
Cost of the Equipment : Rs. 20.17985 (in lakhs )
Department: CIVIL Engineering ( SOILS)
Purpose : To used for construction quality control, material
investigation for earthworks, road
construction and design of pavements
worldwide
*For consultancy work
- used in the analysis and design of pavement for Sarkar
Samakulam Bus stand near Coimbatore. The revenue
generated so far is Rs. 30,000/-
Equipment Name: Oasys
Cost of the Equipment : Rs. 10.50372 (in lakhs )
Department: CIVIL Engineering ( SOILS)
Purpose : - geotechnical engineering software used for
the analysis and
- design of various foundation elements and
soil structures.
* UG/ PG Project, Research and Consultancy work
Equipment Name: Pin on Disc Wear Measuring Machine
Cost of the Equipment : Rs. 6.36828 (in lakhs )
Department: Mechanical Engineering
Purpose : To test the wear rate of different materials and
dynamic frictional force between the wear
materials
*ongoing Research work
wear and friction properties of bulk materials and
composites.(faculty)
*PG project
Equipment Name: Magnesium stir casting furnace with
automatic pouring arrangements
Cost of the Equipment : Rs. 9.51075 (in lakhs )
Department: Mechanical Engineering
Purpose : To produce metal matrix composites
-*PG project and Research work
Equipment Name: vacuum and squeeze casting setup
Cost of the Equipment : Rs. 6.34500(in lakhs )
Department: Mechanical Engineering
Purpose : - To eliminate porosity and shrinkages caused
by the gases
*PG project and Research work
Equipment Name: Ansys 14.5 software
Cost of the Equipment : Rs. 9.85000 (in lakhs)
Department: Mechanical Engineering
Purpose : To simulate structural, fluid flow, heat
transfer and weld assembly
*PG project and Research work
* Utilised in the current semester laboratory
Equipment Name: CNC Turning Machine
Cost of the Equipment : Rs. 12.61774 (in lakhs )
Department: Mechanical Engineering
Purpose : Carry out machining operations such as
facing, boring, turning, grooving, knurling
and threading of Mechanical components.
Equipment Name: CNC Vertical Machine
Cost of the Equipment : Rs. 20.05948 (in lakhs )
Department: Mechanical Engineering
Purpose : Carry out plunge cuts and drilling to precise
sizes and shapes
Equipment Name: PLC and its Application
Cost of the Equipment : Rs. 5.37509 (in lakhs )
Department: Electrical and Electronics Engineering
Purpose : - Programs to control machine operation,
automate electromechanically processes
*Projects and Research work
*6 UG projects carried out
Automatic sheet cutting machine –Layboy unit using PLC
Furnace Dual firing control by PLC
Autoset change system for winder machine using PLC
Cane feeding and Mill speed automation in sugar plant
Automation of de inking pulp receiving chest control using
PLC
Automation in Dye preparation using PLC
Equipment Name: Digital Signal Processing lab
solution
Cost of the Equipment : Rs. 9.60750(in lakhs )
Department: Electrical and Electronics Engineering
Purpose :- Processor for experimentation in power
electronics and drives
*Project and Research work
TMS320F2812 based control of five phase Induction
Motor.
Equipment Name: SCADA based Electrical power
Cost of the Equipment : Rs. 9.98093 (in lakhs )
Department: Electrical and Electronics Engineering
Purpose : - Performance analysis of tr. Line and to
study load management
*to be utilised for Power system lab
Equipment Name: Power System Protection set up
Cost of the Equipment : Rs. 9.94436 (in lakhs )
Department: Electrical and Electronics Engineering
Purpose : - To study various protection scheme of
power system components
*to be utilised for Power system lab
* PG project
Equipment Name: Multipurpose Lab Station
Cost of the Equipment : Rs. 9.39750(in lakhs )
Department: Electrical and Electronics Engineering
Purpose : - Measuring equipments for electrical and
electronics experimentation.
*One paper submitted to Elsevier Journal
Implementation of SVPWM based modified three
phase five level inverter with single DC source using
FPGA
*Project
Design and Implementation of smart PV tracker fed
PMBLM for Residential applications
Equipment Name: Embedded Development
Trainer Kit-PIC18F & ARM
11 Microcontrollers
Cost of the Equipment : Rs. 9.20010 (in lakhs)
Department: Electronics and Communication
Engineering
Purpose :- development board with various on
board I/O interfaces
*to work on embedded & ARM based project
Equipment Name: X-band Microstrip Antenna
Trainer Kit
Cost of the Equipment : Rs.4.96865 (in lakhs)
Department: Electronics and Communication
Engineering
Purpose : - To determine the ccharacteristics and
radiation pattern of Horn Antenna
*utilised for RF lab
*Project
Antenna Design using HFSS Simulator
Equipment Name: Advanced FPGA Development
Board
Cost of the Equipment : Rs. 9.05588 (in lakhs)
Department: Electronics and Communication
Engineering
Purpose : - To design Combinational and Sequential
circuit
* utilised for UG/PG labs and PG project
Low power BIST based Test Pattern Generation
Low Power Multiplier Design
*Research work
Reconfigurable FPGA based Memory System
Design of Digital Filter for signal processing
applications
Equipment Name: Cadence Software
Cost of the Equipment : Rs. 9.85000 (in lakhs)
Department: Electronics and Communication
Engineering
Purpose :- For designing integrated circuits,
systems on chip (or, SoCs) and
printed circuit boards.
*Utilised for PG project
*Research work
Design of low power arithmetic circuits
Design of Digital Filter for signal processing applications
Equipment Name: Robots and Accessories - E-yantra Lab
setup
Cost of the Equipment : Rs. 2.97279 (in lakhs)
Department: Electronics and Communication Engineering
Purpose : carry out Robotics based projects and participate
in contests organised by IITB
Two more projects have been implemented by the UG
Students batches in e-yantra Robotics lab
1. Robots Aided Self Parking System
2. Audio Assisted Robotics Navigator for Visually Impaired
People
Equipment Name: Wireless Sensor Network System
Cost of the Equipment : Rs. 6.50013 (in lakhs)
Department: Electronics and Communication Engineering
Purpose :
1. Used test electronic components and sensors
2. Used in the projects of wireless sensors
Equipment Name: Hybrid tank Setup
Cost of the Equipment : Rs. 7.97659 (in lakhs)
Department: Electronics and Instrumentation
Engineering
Purpose : To control linear liquid level, flow and
temperature process variables
* utilised for UG labs and project
Equipment Name: Three tank conical system
with necessary Interfaces
Cost of the Equipment : Rs. 9.99180 (in lakhs)
Department: Electronics and Instrumentation
Engineering
Purpose : To control non linear liquid level, flow
and process variables
* utilised for UG labs and project
Equipment Name: DCS with PLC and SCADA
Cost of the Equipment : Rs. 9.42480 (in lakhs)
Department: Electronics and Instrumentation
Engineering
Purpose : To implement distributed and sequential
control for various process control
system
* utilised for UG labs and project
Equipment Name: LabVIEW software and
hardware
Cost of the Equipment : Rs. 9.93699 (in lakhs)
Department: Electronics and Instrumentation
Engineering
Purpose : To test, measure and control real time
applications
* utilised for UG labs and project
Equipment Name: Server, Nodes and High speed
switches, router, Firewall
Cost of the Equipment : Rs. 36.56178(in lakhs)
Department: Computer Science Engineering
Purpose : Campus networking
* utilised for campus wide networking by all the
departments
Equipment Name: Data Centre with SAN Infrastructure for
high performance computing
Cost of the Equipment : Rs. 40.90867 (in lakhs)
Department: Computer Science Engineering
Purpose : Live lectures, MOOCs, online courses
* utilised for campus wide networking by all the departments
Equipment Name: Mirror server and Network Infrastructure
for remote classroom simulation
Cost of the Equipment : Rs. 26.75048 (in lakhs)
Department: Computer Science Engineering
Purpose : QEEE live lectures storage, backup server, online
courses
* utilised for campus wide networking by all the departments
Equipment Name: Biohazard safety Cabinet
Cost of the Equipment : Rs. 1.98975 (in lakhs)
Department: Industrial Bio Technology
Purpose : To handle animal cell cultures in a Sterile
Environment
* utilised for Genetic Engineering ,Molecular Biology
lab and U
Equipment Name: Gel documentation System
Cost of the Equipment : Rs. 6.30000 (in lakhs)
Department: Industrial Bio Technology
Purpose : To visualize and capture images of DNA,RNA
Protein bands in Agarose and SDS PAGE gels
after electrophoresis under both UV and
White light
* utilised for Genetic Engineering ,Molecular Biology
lab and UG projects
Equipment Name: Ice maker
Cost of the Equipment : Rs. 2.26800 (in lakhs)
Department: Industrial Bio Technology
Purpose : To prepare Ice flakes for different experiments
which require lower temperature
* utilised for Genetic Engineering ,Molecular Biology
lab and UG projects
Equipment Name: Atomic absorption spectroscopy
Cost of the Equipment : Rs. 33.80829 (in lakhs)
Department: Industrial Bio Technology
Purpose : To measure the Concentrations of elements.
It is sensitive that it can measure down to
parts per billion in a sample
* utilised for Genetic Engineering ,Molecular Biology
lab and UG projects
Equipment Name: Inverted Phase Contrast Microscope
with fluorescence Attachment
Cost of the Equipment : Rs. 10.43750 (in lakhs)
Department: Industrial Bio Technology
Purpose : To visualize colorless and transparent specimen
and view live cells. It is essential in handling
animal cell cultures to study cell morphology
•utilised for Genetic Engineering ,Molecular Biology lab
and UG projects
Equipment Name: Impedance Measurement Meter
Cost of the Equipment : Rs. 12.24000 (in lakhs)
Department : Physics
Purpose : Measuring electrical characteristics like
impedance, dielectric constant for solid
samples
*One Publication in Elsevier Journal Effect of pH a d a eali g te peratures o structural,
magnetic, electrical, dielectric and adsorption properties of
manganese ferrite nano particles , Material “cie ce i Semiconductor Processing, 27,(2014) 672-681
* Consultancy Revenue generated Rs. 200
Equipment Name: Gaussian Software
Cost of the Equipment : Rs. 1.58423 (in lakhs)
Department : Physics
Purpose : software for molecular structural
analysis
*One Publication in Elsevier Journal Vibrational Spectra (FT-IR and FT-Raman), Molecular
structure,
natural bond orbital and TD-DFT analysis of L-Asparagine
Monohydrate by Density functional theory approach
Spectrochemica Acta Part A: Molecular and Biomolecular
Spectroscopy 133(2014) 190-200
Equipment Name: Simultaneous DTA-TGA System ,
Thermal Analysis System Software
and Interface
Cost of the Equipment : Rs. 25.72500 (in lakhs)
Department : Chemistry
Purpose : - Phase changes can be identified for polymer,
inorganic materials and refractory materials
* utilised for Research work
Equipment Name: Binary HPLC System with Chromatography
Work Station
Cost of the Equipment : Rs. 84.0000 (in lakhs)
Department : Chemistry
Purpose : - used for separation of chemical and biological
compounds that are non-volatile
ANNA EDUSAT FACILITY
(Rupees in Lakhs : 5.0 )
It is used to enhance teaching learning
facility through web courses offered by
Anna university.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
DIGITAL LIBRARY SOFTWARE
(Rupees in Lakhs : 5.197 )
It improves Library data base
management, administration and
automation through digital library
software.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
E- BOOK COLLECTION
(Rupees in Lakhs : 1.695 )
It enhances teaching learning and research
facility through e- books.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
CPU 2000 PCB
(Rupees in Lakhs : 6.235 )
It is Installed in XRD Machine by
replacing worn-out PCB. The XRD
machine used for the research of material
properties .
DSPACE SOFTWARE
(Rupees in Lakhs : 5.628)
It facilitates the design and testing of
triggering units for power electronic
convector. it is used by UG& PG Students
for Research work and Projects.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Erbium Dopped Fiber Amplifier
(Rupees in Lakhs :6.999 )
To enhance research and project work
for UG& PG students of ECE
department.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Impact Testing Machine
(Rupees in Lakhs : 15.745 )
It is used to study the impact strength of
polymer based composed martial with
maximum 25 joule. It most useful for
Research activities and PG project
work .it is proposed to providing
consultancy.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Laser Equipments
(Rupees in Lakhs : 23.531 )
Helium Neon laser experimental setup is
very much required for doing projects by
the ME – OC students.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Pin on Disc Tribometer
(Rupees in Lakhs : 4.866 )
It is used to characterize the tribological
properties of thin films an composite
materials. The equipment equipped with
special to find wear in eccentric
position of the sample.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
POWER ANANYZER
(Rupees in Lakhs :10.29 )
It enhances research facility in power
quality. The power quality analyzer is
used to analyze power parameter like
RMS, average, real and reactive powers,
power harmonics, voltage sag ,swell and
THD.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Pulsed Laser Deposition
(Rupees in Lakhs : 21.988 )
This equipment is used to coat thin films
soft and hard coatings. This equipment is
compatible for both D/C magnetron and
R/F sputtering and also used for
TIN,TIC,ITO,CrM coating. It facilitates
research works in coating.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Software Defined Radio
(Rupees in Lakhs : 4.963 )
This can be used for both research and
teaching. Researchers can establish a
wireless network coding test bed using
the SDRs and also can use the radios for
spectrum sensing and eventually
developing cognitive radio networks.
Thus can be used for doing project work
and research to perform various signal
processing tasks such as filtering and
noise reduction also.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Triaxial Test Apparatus
(Rupees in Lakhs : 4.061 )
Soil mechanics lab can use of this
equipment for practical classes and
project works.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Wireless Sensor Networks
(Rupees in Lakhs : 2.453 )
This laboratory on Wireless Sensor Networks
offers students a theoretical and practical
introduction to the concepts of wireless networks,
focusing on sensor network aspects. Practical
knowledge of wireless sensor nodes and
networks, MAC layer protocols and routing
algorithms and programming of sensor network
nodes. The students will first have the
opportunity to familiarize with the sensor
hardware and then with the acquired knowledge
can do individual project using the available
sensor hardware.
Electronic work station
(Rupees in Lakhs : 8.452 )
It provides the advanced work bench
facilities for doing regular laboratory
experiment and research work.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
It is an basic vibration model testing of
single degree of freedom system. The
master engineering students can easily
understand the experimental method of
dynamic problems, application of free
vibration, mode shapes etc. It can be
included in structural engineering
laboratory classes.
Basic Vibration Test Rig
(Rupees in Lakhs : 14.30)
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
To enhance awareness of robotics and
Encourage research activities and projects
for UG& PG students.
E-YANTRA LAB
(Rupees in Lakhs : 5.86)
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Modern Electric Drives Systems
(Rupees in Lakhs : 43.665 )
It enhances the research activities in
solid-state drives and their characteristics
for conventional and special electric
machines for both UG(EEE)& PG (M.E
Power electronic and Drives).
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Servo Hydraulic UTM
(Rupees in Lakhs : 57.609 )
Computerized UTM was not present
in Civil department earlier. And this
equipment has versatile usage of
testing like impact, cyclic, fatigue,
compression testing and tensile
testing of reinforcement. It is useful
for project work of students and
research work.
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
Wi-Fi Device
(Rupees in Lakhs : 70.619 )
It improves internet facilities in and
around campus for enhancing knowledge
sharing through web .
A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.
CNC TURNING CENTER
Cost in Lakhs : Rs.16.85619
Department in which purchased: MECHANICAL ENGINEERING
Purpose : i) For UG students lab work
: ii) PG students project work
: iii) Research & Development
: iv) Consultancy work
: v) Internal Revenue Generation
CNC MILLING
MACHINE Cost in Lakhs : Rs.21.57298
Department in which purchased:
MECHANICAL ENGINEERING
Purpose : i) For UG students lab work
: ii) PG students project work
: iii) Research & Development
: iv) Consultancy work
: v) Internal Revenue Generation
Beneficiaries : 200 Nos.
RAPID PROTOTYPING
MACHINE Cost in Lakhs : Rs.39.30000
Department in which purchased:
MECHANICAL ENGINEERING
Purpose : i) For UG students project work
ii) PG students project work
iii) Research & Development
iv) Consultancy work
v) Internal Revenue Generation
Beneficiaries : 300 Nos.
FIELD EMISSION SCANNING ELECTRON MICROSCOPE
FIELD EMISSION SCANNING ELECTRON MICROSCOPE
Cost : Rs.1,92,00,000/-
(Rupees One Crore and Ninety Two Lakh only)
Department : Mechanical Engineering
Installed at : FESEM Lab
Purpose : Research and Consultancy :
(To Characterize Materials as well as to perform
Elemental Analysis.)
COMPUTER SYSTEMS
COMPUTER SYSTEMS
Cost : Rs.9,92,000/-
(Rupees Nine Lakh and Ninety Two Thousand only)
Department : Institution Level
Installed at : QEEE Centre
Purpose : To Conduct QEEE Live Classes, Live Labs , Pedagogy
Training, Bridge Course, MOOC and E- Learning.
GEAR HOBBING MACHINE
Cost : Rs.9,73,350/-
(Rupees Nine Lakh Seventy Three Thousand
Three Hundred and Fifty only)
Department : Mechanical Engineering
Installed at : Central Workshop
Purpose : Research Works for Ph.D Scholars, PG and UG
Students.
GEAR HOBBING MACHINE
VIDEO CONFERENCING KIT
Cost : Rs.4,84,571/-
(Rupees Four Lakh Eighty Four Thousand
Five Hundred and Seventy One only)
Department : Institution Level
Installed at : QEEE Centre
Purpose : Video Conference for conducting Bridge
Courses and Online Courses .`
VIDEO CONFERENCING KIT
Photo of the Equipment purchased under TEQIP-II
Silver Schmidt – Rs. 2.40750 Lakhs
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Pandit Lab – Rs. 3.30750 Lakh Rupees
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Profometer – Rs 3.51 Lakh Rupees
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Electronic Weighing Machine 20Kg – 0.28035 Lakh
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Motorised Sieve Shaker – 0.86448 Lakh Rupees
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Sample Extractor – 1.78620 Lakh
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Electronic Weighing Balance – 0.62475Lakh
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Direct Sheave Apparatus – Rs 1. 77030 Lakh
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Fully Automatic Compressing Tester – 9.99013Lakh
Installed in Civil Department .
For Testing & Consultancy
Photo of the Equipment purchased under TEQIP-II
Exhaust Gas Analyzer – 5.66775 Lakh Rupees
Installed in Mechanical Department.
For Students practical knowledge and Research
project
Beneficiaries : Faculties who are doing Ph.D and
students