Product Standard Pre-Mixed Dry Concrete is a bagged product consisting of accurately weighed Portland admixtures and specially graded, coarse and fine aggregates. With the addition of water and thor-ough mixing, proper consolidation, finishing and curing, a quality concrete suitable for a variety of uses will be produced.

Quality Concrete aggregates conform to requirements of the ASTM C 33-90 standards. Cement conforms to the requirements of the ASTM C 150-89. Reg-ular quality control tests are carried out. Copies of quality control test certificates can be made avail-able on request.

Approximate Yields When mixed with water to a slump of approxi-mately 3 in (75 mm) 67 lb (30 kg), a bag of Standard Pre-Mixed gives the following approxi-mate yields: Bags per yd3 55 Bags per m3 72 ft3 per bag 0.49 Liters per bag 14.5

Note: Packaging available in up to 1 cubic yard Bulk Bags.

Winnipeg,MB Redlake,ON Thompson,MB Snowlake,MB Flin Flon,MB Saskatoon,SK Edmonton,AB Ph:204-262-5900 Ph:807-735-3011 Ph:204-677-5977 Ph:204-358-7992 Ph:204-687-6533 Ph:306-651-2727 Ph:780-960-6692

www.multicretesystems.com

Typical Properties When mixed to a slump of approximately 3 inch-es (75 mm) and adequately cured, Standard Pre-Mixed Dry Concrete will develop compressive strengths of 3000 PSI or more after 28 days.

Optional Properties Strengths up to 40 Mpa (6000 psi) Admixtures pre-blended into the product 1. Air Entrainment 2. Superplasticizers 3. Accelerators 4. Fiber Reinforcement Sulfate Resistant or Acid Resistant Cement

Type S Calcium Aluminate

STANDARD PRE-MIXED DRY CONCRETE A Quality Pre-bagged Product –(Betty Crocker)

www.multicretesystems.com