STANDARD COMPOSITION

Heating plate and support

Milling cutterManual panel TrolleyDetach devicefor heater

Detachable machine body

Self-aligning hydraulic butt fusion machine, suitable for welding underpressure pipes for water, gas and other fluids up to Ø 250 mm (8” DIPS). Welds according to the International standards ISO 21307 HIGH PRESSURE and ASTM F2620.DELTA 250 TRAILER includes:

- A trailer-mounted machine body, easily removable from the trolley in order to perform also into the ditch, adapting to the conditions of the job site. It comes with the fast-locking adapters system SMARTLocK RITMO Patented, thanks to which is possible to change adapters in few seconds.- An on-board electric milling cutter that is equipped with a safety microswitch to prevent from accidental starts, a thermal circuit breaker to protect the engine and also features an ergonomic docking system and on/off switches. To allow the weld in ditches, the milling cutter is easily removable from the trolley/machine body in order to reduce the overall dimensions of the machine and ease the load/unload process.- An extractable heating plate Teflon-coated (PTFE) equipped with an independent thermometer to check the working temperature.- A heating plate support which comes with a high-temperature-proof bag, which also avoid the heating element from being scratched.

DELTA 250 TRAILER is able to weld fittings like elbows, tees, Y-branches and flanges necks.Available in the 110 V and 230 V versions.

DELTA 250 TRAILER MANUAL

Tool for flange necks

HS rollers 250Inserts Ø 75 ÷ 225 mmØ 2” ÷ 8” IPS Ø 3” ÷ 8” DIPS

Working range75 ÷ 250 mm;

2” IPS ÷ 8” DIPS

Materials HDPE, PP, PB, PVDF For other materials contact RITMO S.P.A.

Power supply*110 V Single Phase 50/60 Hz230 V Single Phase 50/60 Hz

Total absorbed power4600 W (110 V) 4600 W (230 V)

Working temperature 180° ÷ 260° C (356° ÷ 500° F)

Outside temperature range -10° ÷ 40° C (14° ÷ 104° F)

Time to reach welding temperature < 20’

Dimensions machine body (W x D x H)1100 x 1340 x 1300 mm

43.3” x 52.7” x 51,1”

Weight machine body 105 Kg (232 lb)

Weight standard composition 227 Kg (500 lb)

* Suggested power generator 5,5 ÷ 6kVA

ww

w.r

itm

o.it

PLUS 75 ÷ 250 mm water - gas - oil SMARTLOCKfast-locking adapters system Ritmo patented

ON REQUEST

ALL TERRAIN LINE - TRAILER LINE HIGH LEVEL PERFORMANCE

PLUS HIGHPERFORMANCE

ENHANCES PRODUCTIVITY

DIFFERENCES BETWEEN ALL TERRAIN LINE AND TRAILER LINE

ALL TERRAIN LINE TRAILER LINE

Working standards mm √ √

Working standards “IPS /“DIPS √ √

International standards ISO 21307 HIGH PRESSURE

√ √

Welds fittings √ √

Easy Life Welding System √ √

Data-logging √ √

Wi-Fi Ready √ √

PRE-SET 20 customized welding cycles

√ √

Intuitive control panel √ √

GPS traceability √ √

Report PDF √ √

Self-containedGenerator on-board

√ -

Heater/Facer on-board √ √

Insert - Fast-locking system √ √

Trolley with wheels √ √

Self-propelled √ -

Remotely wire-controlledup to 12 m (39 ft)

√ √

Carriage can beremoved for in-ditch use

√ √

Lateral rollers √ √

ww

w.r

itm

o.it

BUTT FUSION MACHINES REFERENCE

WORKING RANGE Ø mm 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630 710 800 900 1000 1200 1400 1600

GAMMA 160 40 50 63 75 90 110 125 140 160

DELTA 160 M 32 40 50 63 75 90 110 125 140 160

DELTA 200 M 63 75 90 110 125 140 160 180 200

BASIC 160 40 50 63 75 90 110 125 140 160

BASIC 200 63 75 90 110 125 140 160 180 200

BASIC 250 75 90 110 125 140 160 180 200 225 250

BASIC 315 90 110 125 140 160 180 200 225 250 280 315

BASIC 355 125 140 160 180 200 225 250 280 315 355

COMPACT 355 125 140 160 180 200 225 250 280 315 355

BASIC 160 EASY LIFE 40 50 63 75 90 110 125 140 160

BASIC 200 EASY LIFE 63 75 90 110 125 140 160 180 200

BASIC 250 EASY LIFE 75 90 110 125 140 160 180 200 225 250

BASIC 315 EASY LIFE 90 110 125 140 160 180 200 225 250 280 315

BASIC 355 EASY LIFE 125 140 160 180 200 225 250 280 315 355

DELTA 500 EASY LIFE 200 225 250 280 315 355 400 450 500

DELTA 630 EASY LIFE 280 315 355 400 450 500 560 630

DELTA 500 200 225 250 280 315 355 400 450 500

DELTA 630 280 315 355 400 450 500 560 630

DELTA 800 500 560 630 710 800

DELTA 1000 630 710 800 900 1000

DELTA 1200 710 800 900 1000 1200

DELTA 1600 ECO / 1600 HDR 800 900 1000 1200 1400 1600

DELTA 250 TRAILER 75 90 110 125 140 160 180 200 225 250

DELTA 355 TRAILER 125 140 160 180 200 225 250 280 315 355

DELTA 355 ALL TERRAIN 125 140 160 180 200 225 250 280 315 355

DELTA 500 TRAILER 200 225 250 280 315 355 400 450 500

DELTA 500 ALL TERRAIN 200 225 250 280 315 355 400 450 500

DELTA 630 TRAILER 225 250 280 315 355 400 450 500 560 630

DELTA 630 ALL TERRAIN 225 250 280 315 355 400 450 500 560 630

DELTA 1000 TRAILER 315 355 400 450 500 560 630 710 800 900 1000

DELTA DRAGON 250 CNC 75 90 110 125 140 160 180 200 225 250

DELTA DRAGON 315 CNC 90 110 125 140 160 180 200 225 250 280 315

WORKING RANGE Ø mm 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630 710 800 900 1000 1200 1400 1600

RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish, French, German, Arab, Italian, Russian and Portuguese.

TRAININGFrom many years now, we have decided that the best way to grant a client/distributor a perfect knowledge of our products Is to invest in custom training, in our own premises. These courses are aimed to teach how to operate the products in the best way, and how to supply the “first aid” when necessary.

PRESALES TECHNICAL ASSISTANCEWhen a client or a potential client wants to buy us a product, it is our standard procedure to help find the best solution to its needs.

GLOBAL ADVICEIn such a technical field as ours, the customer requires the best assistance. Thanks to the experience developed along the years, and to the co-operation with several manufacturers, institutions, schools and training institutes, RITMO is able to give the most comprehensive advice to no matter which related issue. Our company is a long-time member of a UNIPLAST’s (UNI-Italian National Plastics Standards Body) working group dedicated to the study and draw up of new standards within our field. The importance of this group is linked to the fact that the expansion of the plastic welding field ought to be followed by a crescent sensitivity for safety issues, so to have a sustainable and continuous growth. The working group prepares draws, hence present them to the UNI to be discussed and eventually transformed into new standards.

AFTER SALES TECHNICAL ASSISTANCERitmo’s Service Centre can solve all kind of technical issues, as well as overhaul our machines. Ritmo has other Service Centres abroad, linked to its official distributors.

STARTING AND TESTINGRITMO’ technicians are prepared to make the starting and testing of workshop machines at the client’ own premises, so that the fittings production can start almost immediately.

DVANTAGEA RITMO

Ed. 5

/202

0