standalone drybox - with humidity sensor · 2019. 7. 29. · ondřej stříteský standalone drybox...
TRANSCRIPT
Ondřej Stříteský
Standalone Drybox -with humidity sensor
VIEW IN BROWSER
updated 29. 7. 2019 | published 29. 7. 2019
30 hrs
3 pcs
f
0.20 mm
k
0.40 mm
h
PLA
414 g
d
MK3/S
PRUSAPRINTERS
Summary
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor.
You can place five pieces of this drybox on the top of the Prusa PrinterEnclosure V2.
Build instructions are the same as described in the article: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/
3D Printers > Other Accessories
spoolholder mmu2s drybox
Print Files (.gcode) DOWNLOAD ALL FILES
7.1 MB
14.75 hrs f 0.20 mm k 0.40 mm h PLA 206.00 g d MK3/S
updated 29. 7. 2019
266.0 KB
1.17 hrs f 0.20 mm k 0.40 mm h PLA 13.00 g d MK3/S
updated 29. 7. 2019
14.2 MB
14.46 hrs f 0.20 mm k 0.40 mm h PLA 195.00 g d MK3/S
updated 29. 7. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
670.5 KBupdated 29. 7. 2019
179.6 KBupdated 29. 7. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
standalone_drybox_prusa-withsensor_02mm_pla_mk3.gcode
tray_drybox_prusa_enclosure_v2-withsensor_02mm_.gcode
top_drybox_prusa_enclosure_v2-withsensor_02mm_p.gcode
standalone_drybox_prusa_enclosure_v2-withsensor.stl
standalone_drybox_prusa-withsensor.3mf
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition