PERFORMANCE UNDER PRESSUREAGAIN. AND AGAIN. AND AGAIN.

STAINLESS STEEL VALVESHigh quality range of Fine Metering, Flow Control, Needle, Check, Shuttle & Quick Exhaust Valves

To meet the requirements of operators in oil, gas, marine, food processing and chemical industries, the basic material of this range of valves is 316L/S12 low carbon stainless steel. The mechanical condition of the stainless steel conforms with NACE specification MR-01-75. Viton Seals are used throughout to cover sour gas applications and temperature ranges from -15ºC to +200ºC.

Special seals are also available for specific applications and temperature ranges upon request.

Flow, needle and check valves are suitable for 35 bar pressure normal pneumatic operations, with a 7 bar maximum pressure limitation when a resilient check ball is fitted for bubble tight sealing. On hydraulic applications the maximum working pressure is 350 bar.

helipebs-controls.co.uk sales@helipebs.co.uk

With over 45 years’ experience you can trust our high quality, reliable Stainless Steel Valves.

Fine Metering Flow Control

Fine Metering Needle Valves

Flow Control Valves

Phone: +44 (0)1452 423201

PERFORMANCE UNDER PRESSUREAGAIN. AND AGAIN. AND AGAIN.

Needle Valves

Check Valves

Quick Exhaust Valves

Shuttle Valves

Bleed Valves

Helipebs Controls Limited, Sisson Road,

Gloucester, GL2 0RE, United Kingdom

Phone: +44 (0)1452 423201 Email: sales@helipebs.co.uk

helipebs-controls.co.uk

CYLINDERS · VALVES · SYSTEMS SPARES · SERVICING · REPAIRS

DID YOU KNOW WE ALSO DO?As well as our stainless steel valves, we can also provide a wide variety of tie rod hydraulic and

pneumatic cylinders, welded hydraulic cylinders and hydraulic systems.

We are also able to offer a full range of services, from bespoke cylinder design through to spares,

as well as overhaul of our manufactured valves and cylinders or similar competitors’ product.

Registered No. 947282 England Rev:10/9

FM 14317 EMS 69317 OHS 531173