stacks - die set manufacturer - superior die set · 2017-08-02 · 4140 as rolled 4340 forge-rite...
TRANSCRIPT
4140 As Rolled
4340 FoRge-Rite ™
4130 P20
4130 PRehARd
with
StackStheDeck
An ALSI 4130 Chrome moLy ALLoy SteeL SuppLIed At 28-32 rC (300 Bhn).thIS hoLder BLoCk quALIty type SteeL provIdeS optImum mAChIneABILty when CompAred wIth other prehArd ALLoyS. StoCked In nomInAL thICkneSSeS up to 9 1/8".
An ALSI 4130 Chrome moLy ALLoy SteeL SuppLIed At 28-32 rC (300 Bhn).whILe SImILAr to our 4130 prehArd, thIS premIum grAde ALLoy hAS reduCed SuLfur for LeSS poruSIty And exCeLLAnt poLIShABILIty. StoCked In nomInAL thICkneSSeS up to 6".
An ALSI 4140 Chrome moLy ALLoy SteeL SuppLIed At 22-26 rC (245 Bhn) typICAL.thIS hot-roLLed SteeL provIdeS vAStLy SuperIor meChAnICAL propertIeS In CompArISon to typICALLy uSed A36 pLAte wIth eConomICAL vALue AgAInSt prehArd ALLoyS. StoCked In 1/8" overSIzed thICkneSSeS up to 4.125".
An ALSI 4340 nICkeL Chrome moLy ALLoy SteeL SuppLIed At 22-26 rC (245 Bhn) typICAL.thIS proprIetAry hot-roLLed SteeL IS SpeCIALLy formuLAted for toughneSS And ShoCk reSIS-tAnCe, eSpeCIALLy At eLevAted temperAture. StoCked In 1/8" overSIzed thICkneSSeS up to 12.125".
Tensile sTrengTh161 kSI - 128 kSI
Yield sTrengTh138 kSI - 113 kSI
impacT sTrengTh30 ft-LB - 50 ft-L
hardness, TYpical28 - 32 roCkweLL C
Tensile sTrengTh150 kSI - 140 kSI
Yield sTrengTh125 kSI - 120 kSI
impacT sTrengTh30 ft-LB - 50 ft-LB
hardness, TYpical28 - 32 roCkweLL C
Tensile sTrengTh148 kSI - 95 kSI
Yield sTrengTh95 kSI - 60 kSI
impacT sTrengTh15 ft-LB - 25 ft-LB
hardness, TYpical26 roCkweLL C (mAx)
Tensile sTrengTh145 kSI - 125 kSI
Yield sTrengTh95 kSI - 90 kSI
impacT sTrengTh30 ft-LB - 50 ft-LB
hardness, TYpical26 roCkweLL C (mAx)
4130 P204130 prehard
4340 forge-rite ™4140 as rolled
Mechanical ProPerties Mechanical ProPerties
Mechanical ProPertiesMechanical ProPerties
900 W. Drexel Avenue • Oak Creek, WI 53154Phone (800) 558-6040 • FAX (800) 657-0855
* All Alloys AvAilAble in DCF
New!