ss/268xd 3 2600t series pressure transmitters · data sheet ss/268xd_3 abb 2600t series engineered...
TRANSCRIPT
Data SheetSS/268XD_3
ABB 2600T SeriesEngineered solutions
for all applications
TÜV SIL2 certified to IEC 61508/ISA S84.01– the smart solution in Safety loop application
Base accuracy : ±0.075%
Span limits– 0.54 to 16000kPa; 2.14inH2O to 2320psi– 1.1 to 16000kPa abs; 8mmHg to 2320psia
Reliable sensing system coupled with very latestdigital technologies
Hardware and software redundancy with MTBFof over 100 years
Comprehensive sensor choice– optimize in-use total performance and stability
5–year stability
Flexible configuration facilities– provided locally via local keys combined with LCD
indicator or via hand held terminal orPC configuration platform
HART® communication– provides integration with HART® platforms
Broad selection of variants, options, fill fluidsand wetted materials– allows total flexibility maximizing cost-effective
aspect, also providing applications with criticalprocess media at extended temperature range
PED compliance to sound engineering practice(SEP)
FieldIT
2600T Series Pressure Transmitters
Model 268DD Differential/Gauge Model 268HD Gauge
Model 268ND Absolutewith flanged direct mount seal
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
2
Functional SpecificationsRange and span limits
General DescriptionModel 268DD, 268HD and 268ND detailed in this data sheet apply forthose transmitters which include on high pressure measuring side, a directmount seal which is integral to the transducer by a short capillaryconnection inside a protective rigid tube.This construction forms a standalone single assembly suitable to bemounted to the process by the seal mounting facilities.By properly selecting the high and low pressure side variant in the orderingcodes model 268DD can be in the following versions :a) one direct mount seal and one flange for process connection, direct
1/4 – 18 NPT or 1/2 – 14 NPT through adapter; this allows also to connectthe other leg (wet or dry) for differential measurement.A proper filter is supplied as standard when 1/4 – 18 NPT connectionis selected, in order to plug the unused entry, leaving it vented for gaugemeasurement with reference to atmosphere.
b) one direct mount seal and one remote seal with capillary; the two sealsallow again a differential measurement and must be selected of sametype/size.
Model 268HD and 268ND have the direct mount seal on the positive side,respectively with the reference at atmospheric or vacuum pressure, forgauge or absolute measurements.
Allowed types of direct mount seal are mainly used for chemical application:- flush diaphragm flange mounted seal- extended diaphragm flange mounted seal- off-line threaded connection seal- off-line flanged connection sealThese are suitable also for other process applications including food andsanitary, using FDA approved filling, which are defined as food fills and areGenerally Recognized As Safe (GRAS) by the US Food and DrugAdministration (FDA).Refer to seal data sheet for all data and details relevant to seal element.The following table list the types of standard seal which can be mountedwith 268DD, 268HD and 268ND transmitters (the mnemonic is used asreference in the compatibility table).
All following specification data apply for identical characteristics of the two seals when the transmitter has the remote seal in addition to the direct mount one.
epytlaeS eziS cinomenM
hsulfdegnalFmgarhpaid
)ylnoJREMSA(ni2/1-105ND/ni2
001-08ND/ni4-3
5.1P2P3P
dednetxedegnalFmgarhpaid
05ND/ni208ND/ni3001ND/ni4
2E3E3P
dnadedaerhtenil-ffOlaesnoitcennocdegnalf
ni2/1-2 5.2T
The combinations sensor code/seal type marked (•) modify the base accuracy rating and static pressure effect; refer to performance specifications.
ALL AVAILABLE SEALS FOR DIRECT MOUNT ARE SUITABLE FOR LISTED RANGES OF MODELS 268HD/ND WITHOUT LIMITATION.
(§) Lower Range Limit is 0.135kPa abs, 1.35mbar abs, 1mmHg for inert Galden or 0.4kPa abs, 4mbar abs, 3mmHg for inert Halocarbon.
rosneSedoC
egnaRreppU)LRU(timiL
)LRL(timiLegnaRrewoLmuminiM
naps
ytilibitapmoC)DD862roflaesdewolla(
DD862tnuomtceriD
laitnereffid
DD862tnuomtceriD
eguag
DN862/DH862tnuomtceriDetulosba/eguag
tnuomtceriDylnolaes
dnatnuomtceriDlaesetomereno).mnihtgnelxam(
EaPk61
rabm061Hni46 2O
aPk61–rabm061–
Hni46– 2O
aPk61–rabm061–
Hni46– 2O
aPk45.0rabm4.5
Hni41.2 2O
3P,)•(2P)•(3E
5.2T
)3(3P)•()2(3E
FaPk04
rabm004Hni061 2O
aPk04–rabm004–
Hni061– 2O
aPk04–rabm004–
Hni061– 2O
aPk76.0rabm7.6
Hni76.2 2O
3P,2P3E,)•(2E
5.2T
)5(3P,)•()2(2P)3(3E
)2(5.2T
GaPk56
rabm056Hni062 2O
aPk56–rabm056–
Hni062– 2O
aPk56–rabm056–
Hni062– 2O
)§(sbaaPk70.0/aPk56–)§(sbarabm7.0/rabm056–
Hni062– 2 )§(gHmm5.0/O
aPk1.1rabm11
Hni53.4 2O
3P,2P3E,)•(2E
5.2T
)5(3P,)•()2(2P)3(3E
)2(5.2T
HaPk061
rabm0061Hni246 2O
aPk061–rabm0061–
Hni246– 2O
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk76.2rabm7.62
Hni7.01 2O
5.1P3P,2P3E,2E
5.2T
)2(5.1P)8(3P,)5(2P)6(3E,)4(2E
)6(5.2T
MaPk006
rab6isp78
aPk006–rab6–isp78–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk01rab1.0isp54.1
5.1P3P,2P3E,2E
5.2T
)3(5.1P)8(3P,)8(2P)8(3E,)6(2E
)6(5.2T
PaPk0042
rab42isp843
aPk0042–rab42–isp843–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk04rab4.0isp8.5
5.1P3P,2P3E,2E
5.2T
)5(5.1P)8(3P,)8(2P)8(3E,)6(2E
)6(5.2T
QaPk0008
rab08isp0611
aPk0008–rab08–
isp0611–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk431rab43.1isp4.91
5.1P3P,2P3E,2E
5.2T
)5(5.1P)8(3P,)8(2P)8(3E,)6(2E
)6(5.2T
SaPk00061
rab061isp0232
aPk00061–rab061–isp0232–
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
)§(sbaaPk70.0)§(sbarabm7.0
)§(gHmm5.0
aPk762rab76.2isp7.83
5.1P3P,2P3E,2E
5.2T
)5(5.1P)8(3P,)8(2P)8(3E,)6(2E
)6(5.2T
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
3
Process
Lower limit (side without seal for 268DD only)
– refer to lower ambient limits; –20°C (–4°F) for Viton gasket
Upper limit (side without seal for 268DD only)
– Silicone oil: 121°C (250°F) (1)
– Inert fluid: 100°C (212°F) (2)
(1) 100°C (212°F) for application below atmospheric pressure
(2) 65°C (150°F) for application below atmospheric pressure
The following table show characteristics of fill fluids when used intransmitters with direct mount seal on high pressure side.
Fill fluids with FDA are defined as food fills and are Generally RecognizedAs Safe (GRAS) by the US Food and Drug Administration (FDA).
Limits for gaskets (flange to seal) of S264M and S264T
- Viton: –20°C (–4°F) to 200°C (392°F)
Limits for gaskets of flushing rings
Storage
Lower limit: –50°C (–58°F); –40°C (–40°F) for LCD indicators
Upper limit: +85°C (+185°F)
Span limits
Maximum span = URL(can be further adjusted up to ± URL (TD = 0.5) for differentialmodels, within the range limits)
IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSORCODE PROVIDING THE TURNDOWN VALUE AS LOWEST ASPOSSIBLE TO OPTIMIZE PERFORMANCE CHARACTERISTICS.
Zero suppression and elevation
Zero and span can be adjusted to any value within the range limitsdetailed in the table as long as:
– calibrated span ≥ minimum span
DampingSelectable time constant : 0, 0.25, 0.5, 1, 2, 4, 8 or 16s.This is in addition to sensor response time
Turn on time
Operation within specification in less than 1s with minimumdamping.
Insulation resistance
> 100MΩ at 1000VDC (terminals to earth)
Operative limitsREFER ALSO TO S264 DATA SHEET FOR POSSIBLE FURTHERLIMITATION DUE TO SEAL VARIANTS AND FOR DATA RELEVANT TOTHE POSSIBLE REMOTE SEAL (IF SELECTED ON NEGATIVE SIDE)
Temperature limits °C (°F) :
Ambient (is the operating temperature)
Lower ambient limit for LCD indicators: –20°C (–4°F)
Upper ambient limit for LCD indicators: +70°C (+158°F)
Note : For Hazardous Atmosphere applications see the temperaturerange specified on the certificate/approval relevant to theaimed type of protection
SDIULFLLIF)NOITACILPPA(
SNOITIDNOCGNITAREPO
xamTfo>sbaP@
nimPsbarabm
)aisp(
xamTnimP@
nimT
002CD-lioenociliS)esopruplareneG(
)093(002rabm53@
7.0)10.0(
061)023(
04–)04–(
041NA-lioenociliS)erutarepmethgiH(
)084(052rabm7.0@
7.0)10.0(
052)084(
5–)32+(
TLXmrehtlyS–remyloPenociliS)erutarepmetwoL(
)212(001rabm011@
2)30.0(
02)86(
001–)841–(
02-MeeboeN-lioelbategeVADF)yratinaS-dooF(
)093(002rab1@
031)9.1(
051)003(
81-)0(
)%07(retaWnirecylGADF)yratinaS-dooF(
)002(39rab1@
0001)5.41(
39)002(
7–)02+(
28LOCRAM-liolareniMADF)yratinaS-dooF(
)093(002rabm002@
33)5.0(
04)401(
04–)04–(
nedlaG–trenI)ecivreSnegyxO(
)023(061rab1@
7.0)10.0(
56)051(
81–)0(
2.4nobracolaH–trenI)ecivreSnegyxO(
)653(081rabm004@
4)60.0(
07)851(
02–)4–(
llifBBA)slaicepsdnastniaP(
)084(052rabm53@
7.0)10.0(
061)023(
01–)41+(
gnilliFDD862ledoM DN/DH862sledoM
srosneSSotF
ErosneSsrosneS
SotGlioenociliS
002CD58+dna04–
)581+dna04–(58+dna52–
)581+dna31–(58+dna04–
)581+dna04–(trenI
nedlaG58+dna02–)581+dna4–(
58+dna01–)581+dna41+(
58+dna02–)581+dna4–(
trenInobracolaH
58+dna02–)581+dna4–(
58+dna01–)581+dna41+(
58+dna02–)581+dna4–(
lairetaM erusserP).xam(
erutarepmeT).nim().xam(
timilTxP
kcolraG,rab96,aPM9.6
isp0001C°402
)F°004(C°37–
)F°001–(000052
)ispxF°(
etihparG,rab52,aPM5.2
isp263C°083
)F°617(C°001–
)F°841–(
EFTP,rab06,aPM6
isp078C°052
)F°284(C°001–
)F°841–(
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
4
Pressure limits
Overpressure limits (without damage to the transmitter)
0.07kPa abs, 0.7mbar abs, 0.01psia (0.135kPa abs, 1.35mbar abs,1mmHg for inert Galden or 0.4kPa abs, 4mbar abs, 3mmHg for inertHalocarbon) to transmitter sensor limit or flange rating of seal,whichever is less:
– 16MPa, 160bar, 2320psi for sensor code E of model 268DD
– 14MPa, 140bar, 2030psi for sensor codes G,H,M of model 268HD/ND
– 21MPa, 210bar, 3045psi for sensor codes F to S of model 268DD andfor sensor codes P,Q,S of models 268HD and 268ND.
– maximum flange pressure rating (see tables below)
For model S264E flanged seal:
For model S264A (RF) and S264R (RJ) flanged seal:
For model S264M off-line flanged seal:
– Class 150 to ASME B16.5: 230psi @100°F (38°C)
– Class 300 to ASME B16.5: 600psi @100°F (38°C)
– PN16-40 to EN 1092-1: 34bar @20°C
For model S264T off-line threaded connection seal:
– 16MPa, 160bar, 2320psi @20°C (68°F)
The pressure limit decreases with increasing temperature above tothe specified values as defined for the material, respectively forASME B16.5 or EN 1092-1 standards.
Static pressure
Transmitters for differential pressure model 268DD operates withinspecifications between the following limits:
– 1.3kPa abs,13mbar abs, 0.2psia and 21MPa, 210bar, 3045psi(16MPa, 160bar, 2320psi for sensor code E)or flange rating of seal as above, whichever is less
– 0.07kPa abs, 0.7mbar abs, 0.01psia and 21MPa, 210bar,3045psi (16MPa, 160bar, 2320psi for sensor code E)or flange rating of seal as above, whichever is less,using a second seal remote on negative pressure side.
Proof pressure
The transmitter can be exposed without leaking to line pressure of up to:
– 28MPa, 280bar, 4000psi for model 268DD and for sensor codesG,H,M of models 268HD and 268ND
– 40MPa, 400bar, 5900psi for sensor codes P,Q,S of models 268HDand 268ND
or two times the flange rating of seal, whichever is less.
Meet ANSI/ISA–S 82.03 hydrostatic test requirements and SAMA PMC 27.1.
ssalC/gnitaR1-2901NEot
leetSnobraCC°021@
leetSsselniatS613ISIAC°02@
61NP rab61 rab61
04NP rab04 rab04
36NP rab36 rab36
001NP rab001 rab001
ssalC/gnitaR5.61BEMSAot
leetSnobraC)C°83(F°001@
leetSsselniatS613ISIA)C°83(F°001@
051ssalC isp582 isp572
003ssalC isp047 isp027
006ssalC isp0841 isp0441
009ssalC isp0222 isp0612
0051ssalC isp5073 isp0063
)JRylno(0052ssalC isp0716 isp0006
Environmental limits
Electromagnetic compatibility (EMC)
Comply with EN 61000–6–3 for emission and EN 61000–6–2 forimmunity requirements and test;
Radiated electromagnetic immunity level: 30V/m(according to IEC 1000–4–3, EN61000–4–3)
Conducted electromagnetic immunity level : 30V(according to IEC 1000–4-6, EN 61000–4–6)
Surge immunity level (with surge protector): 4kV(according to IEC 1000-4–5 EN 61000–4–5)
Fast transient (Burst) immunity level: 4kV(according to IEC 1000–4–4 EN 61000–4–4)
Pressure equipment directive (PED)
Comply with 97/23/EEC following sound engineering practice (SEP).
Humidity
Relative humidity: up to 100% annual average
Condensing, icing: admissible
Vibration resistance
Accelerations up to 2g at frequency up to 1000Hz(according to IEC 60068–2–6)
Shock resistance (according to IEC 60068-2-27)
Acceleration: 50g
Duration: 11ms
Wet and dust-laden atmospheres
The transmitter is dust and sand tight and protected against immersioneffects as defined by EN 60529 (1989) to IP 67 (IP 68 on request) or byNEMA to 4X or by JIS to C0920. IP65 with Harting Han connector.
Hazardous atmospheres
With or without output meter– INTRINSIC SAFETY/EUROPE:
ATEX/TÜV approvalII 1 G T50°C, EEx ia IIC T5 (–40°C ≤ Ta ≤+40°C)T95°C, EEx ia IIC T4 (–40°C ≤ Ta ≤+85°C)
– FLAMEPROOF/EUROPE:ATEX/CESI approvalII 1/2 GD T85°C, EEx d IIC T6 (–40°C ≤ Ta ≤ +75°C)
– CANADIAN STANDARD ASSOCIATION and FACTORY MUTUAL:– Explosionproof: Class I, Div. 1, Groups A, B, C, D– Dust ignitionproof : Class II, Div. 1, Groups E, F, G– Suitable for : Class II, Div. 2, Groups F, G; Class III, Div. 1, 2– Nonincendive: Class I, Div. 2, Groups A, B, C, D– Intrinsically safe: Class I, II, III, Div. 1, Groups A, B, C, D, E, F, G
AEx ia IIC T6/T4, Zone 0 (FM)– GOST (Russia), GOST (Kazakistan), Inmetro (Brazil)
based on ATEX
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
5
Optional surge protection
Up to 4kV
– voltage 1.2 µs rise time / 50 µs delay time to half value
– current 8 µs rise time / 20 µs delay time to half value
Output signal
Two–wire 4 to 20mA, user-selectable for linear or square root output,power of 3/2 or 5/2, 5th order or two 2nd order switching point selectableprogrammable polynomial output.
HART® communication provides digital process variable (%, mA orengineering units) superimposed on 4 to 20mA signal, with protocolbased on Bell 202 FSK standard.
Output current limits (to NAMUR standard)
Overload condition
- Lower limit: 3.8mA
- Upper limit: 20.5mA
Transmitter failure mode (to NAMUR standard)
The output signal can be user-selected to a value of 3.7 or 22mA ongross transmitter failure condition, detected by self-diagnostics.
In case of CPU failure the output is driven <3.7mA or >22mA.
Electrical Characteristics and Options
HART digital communication and 4 to 20mA output
Power Supply
The transmitter operates from 10.5 to 42VDC with no load and isprotected against reverse polarity connection (additional load allowsoperations over 42VDC).
For EEx ia and other intrinsically safe approval power supply mustnot exceed 30VDC.
Ripple
20mV max on a 250Ω load as per HART specifications
Load limitations
4 to 20mA and HART total loop resistance :
A minimum of 250Ω is required for HART communication.
Optional indicators
Output meter
CoMeter and Prometer LCD:
5-digit (±99999 counts) programmable with 7.6mm. high (3in),7-segment numeric characters plus sign and digital point for digitalindication of output value in percentage, current or engineer unit;
10-segment bargraph display (10% per segment) for analogindication of output in percentage;
7-digit with 6mm. high (2.3in), 14-segment alphanumericcharacters, for engineer units and configuration display
Analog : 36mm (1.4in) scale on 90°.
R(kΩ) =Supply voltage – min. operating voltage (VDC)–––––––––––––––––––––––––––––––––––––––
22.5
(volts)
MINIMUM OPERATING VOLTAGES
with optional output analog indicator
with optional surge protection
with ProMeter output indicator
10.7 12.3 12.5
no link on output indicator plugs
15.3
with CoMeter indicator and HART communication
13.3
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
6
per 20K (36°F) process temperature change on seal diaphragmbetween the process operating temperature limits
Optional CoMeter and ProMeter ambient temperature
Total reading error per 20K (36°F) change between the ambient limitsof –20 and +70°C (-4 and +158°F) :
±0.15% of max span (16mA).
Static pressure (zero errors can be calibrated out at line pressure)
seal effect additional to transmitter sensor effect applicable fordifferential measurement per 2MPa, 20bar or 290psi.
Model 268DD direct mount seal only– zero error: ±0.15% of URL– span error: ±0.15% of readingModel 268DD direct mount plus remote seal– zero error: ±0.20% of URL– span error: ±0.20% of readingMultiply by 1.5 the errors for sensor seal combinations marked (•).
Supply voltage
Within voltage/load specified limits the total effect is less than0.005% of URL per volt.
Load
Within load/voltage specified limits the total effect is negligible.
Electromagnetic field
Total effect : less than 0.10% of span from 20 to 1000MHz and forfield strengths up to 30V/m when tested with shielded conduit andgrounding, with or without meter.
Common mode interference
No effect from 100Vrms @ 50Hz, or 50VDC
Vibration effect
±0.10% of URL (according to IEC 61298–3)
URLSpan
URLSpan
URLSpan
Performance specificationsStated at reference condition to IEC 60770 ambient temperature of 20°C(68°F), relative humidity of 65%, atmospheric pressure of 1013hPa(1013mbar), mounting position with vertical diaphragm and zero basedrange for transmitter with isolating diaphragms in AISI 316 L ss or Hastelloyand silicone oil fill and HART digital trim values equal to 4–20mA span endpoints, in linear mode.
Unless otherwise specified, errors are quoted as % of span.
Some performance data are affected by the actual turndown (TD) as ratiobetween Upper Range Limit (URL) and calibrated span.
IT IS RECOMMENDED TO SELECT THE TRANSMITTER SENSOR CODEPROVIDING THE TURNDOWN VALUE AS LOWEST AS POSSIBLE TOOPTIMIZE PERFORMANCE CHARACTERISTICS.
Accuracy rating% of calibrated span, including combined effects of terminal basedlinearity, hysteresis and repeatability.
For fieldbus versions SPAN refer to analog input function block outscalerange
Using direct mount seal sizes <DN 80/3in– ±0.075% for TD from 1:1 to 10:1
(±0.10% for sensor code F ±0.10% for sensor code E for TD from 1:1 to 5:1)
– ±0.0075% x for TD from 10:1 to 20:1
(±0.01% x for sensor code F
±0.02% x for sensor code E for TD from 5:1 to 10:1)
Using direct mount seal sizes ≥DN 80/3in– ±0.075% for TD from 1:1 to 10:1
(±0.10% for sensor code E for TD from 1:1 to 5:1)
– ±0.0075% x for TD from 10:1 to 20:1
(±0.02% x for sensor code E for TD from 5:1 to 10:1)
Multiply the values by 1.5 for sensor/seal combination marked (•) and fortransmitter with direct mount seal plus one remote seal.
Operating influences
Temperature effects
per 20K (36°F) ambient temperature change on transmitter sensorbetween the limits of –20°C to +65°C (–4 to +150°F) :
Transmitter effect:
– ±(0.04% URL + 0.065% span)
Direct mount seal additional effect:
URLSpan
URLSpan
ezisepytlaeSrorrE
aPk rabm Hni 20
)ylnoJR(ni2/1-1hsulF 25.0 2.5 90.2
05ND/ni2hsulF 21.0 2.1 84.0
001–08ND/ni4–3hsulF 20.0 2.0 80.0
05ND/ni2dednetxE 2.0 2 8.0
08ND/ni3dednetxE 60.0 6.0 42.0
001ND/ni4dednetxE 20.0 2.0 80.0
ni2/1-2enil-ffO 01.0 1 4.0
ezisepytlaeSrorrE
aPk rabm Hni 20
)ylnoJR(ni2/1-1hsulF 58.0 5.8 4.3
05ND/ni2hsulF 23.0 2.3 82.1
001–08ND/ni4–3hsulF 1.0 1 4.0
05ND/ni2dednetxE 53.0 5.3 4.1
08ND/ni3dednetxE 71.0 7.1 86.0
001ND/ni4dednetxE 1.0 1 4.0
ni2/1-2enil-ffO 52.0 5.2 1
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
7
Physical Specification(Refer to ordering information sheets of transmitter and seal(s) for variantavailability related to specific model or versions code)
Materials
Model 268DD only
Low pressure side process isolating diaphragms (*)
AISI 316 L ss; Hastelloy C276™; Monel 400™; Tantalum;Hastelloy C276™ on AISI 316 L ss gasket seat.
A remote seal can be selected with required diaphragm material(refer to high pressure side).
Low pressure side process flanges, adapters, plugs and drain/ventvalves (*)
AISI 316 L ss; Hastelloy C276™; Monel 400™.
Bolts and nuts
AISI 316 ss bolts Class A4–80 and nuts Class A4-70 per UNI 7323(ISO 3506);
AISI 316 ss bolts and nuts Class A4–50 per UNI 7323 (ISO 3506), incompliance with NACE MR0175 Class II.
Gaskets (*)
Viton™; PTFE.
Model 268DD/HD/ND
High pressure side process diaphragm (direct mount seal) (*)
AISI 316 L ss; Hastelloy C276™; Hastelloy C2000™; Inconel 625;Tantalum; AISI 316 L ss or Hastelloy C276™ with anti-stick coating;AISI 316 L ss with anti-corrosion coating; AISI 316 L ss gold plated;Superduplex ss (UNS S32750 to ASTM SA479);Diaflex (AISI with anti-abrasion treatment).
Extension material
AISI 316 L ss (also for Diaflex and gold plated diaphragms);Hastelloy C276™;AISI 316 L ss or Hastelloy C276™ with coating same as diaphragm
High pressure side fill fluid (direct mount seal)
Silicone oil-DC200™, Silicone oil-AN 140™, Inert-Galden™,Inert-Halocarbon™ 4.2, Silicone Polymer-Syltherm XLT™,Vegetable oil-Neobee M-20™, Glycerin Water,Mineral oil-MARCOL 82™, ABB fill.
Sensor fill fluid
Silicone oil (DC200™); inert fill (Halocarbon ™ 4.2 or Galden™);
Sensor housing
AISI 316 L ss.
Electronic housing and covers
Barrel version
– Aluminium alloy with baked epoxy finish;
– Copper-free content aluminium alloy with baked epoxy finish;
– AISI 316 L ss.
DIN version
– Aluminium alloy with baked epoxy finish.
Covers O-ring
Buna N.
Local zero and span adjustments:
Glass filled polycarbonate plastic (removable).
Tagging
AISI 316ss data plate attached to the electronics housing.
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
8
CalibrationStandard: at maximum span, zero based range, ambient temperatureand pressure;
Optional: at specified range and ambient conditions.
Optional extras
Output indicator
plug-in rotatable type, LCD or analog.
Supplemental customer tag
AISI 316 ss tag screwed/fastened to the transmitter for customer's tagdata up to a maximum of 20 characters and spaces on one line for tagnumber and tag name, and up to a maximum of 3 spaced strings of 10characters each for calibration details (lower and upper values plusunit). Special typing evaluated on request for charges.
Surge protection
Test Certificates (test, design, calibration, material traceability)
Tag and manual language
Communication connectors
Seal flushing ring (with relevant plugs and gasket)
Process connectionson conventional flanges : 1/4 – 18 NPT on process axis
on adapters : 1/2 – 14 NPT on process axis
fixing threads: 7/16 – 20 UNF at 41.3mm centre distance
on seal side (refer to drawings for details)
Flush diaphragm flanged seal (**):2in or 3in ASME 150 to 1500 RF; 4in ASME 150-300 RF.1-1/2in, 2in or 3in ASME 150 to 2500 RJ.DN50 or DN80 DIN PN16–40, PN63–100;DN100 PN16–40.
Extended diaphragm flanged seal (**):2in, 3in, 4in ASME 150 - 300 RF.DN50, DN80, DN100 PN16 – 40.
Off-line flanged connection seal (***)1/2in, 1in or 1-1/2in hole connection, ASME CL150-300.DN25 or DN40, EN PN16-40.
Off-line threaded connection seal 1/4in, 1/2in, 3/4in, 1in, 1-1/2in NPT thread.
Gasket seat finishsmooth (ASME or EN): 0.8µm (Ra)serrated (ASME): 3.2 to 6.3µm (Ra)serrated (EN 1092-1 Type B1; up to PN40): 3.2 to 12.5µm (Ra)serrated (EN 1092-1 Type B2; PN63-100): 0.8 to 3.2µm (Ra)
Electrical connectionsTwo 1/2 – 14 NPT or M20x1.5 or PG 13.5 or 1/2 GK threadedconduit entries, direct on housing.
Special communication connector (on request)
– HART : straight or angle Harting Han connector and one plug.
Terminal block
HART version: three terminals for signal/external meter wiring up to2.5mm2 (14AWG) and three connection points for test andcommunication purposes.
Grounding
Internal and external 6mm2 (10AWG) ground termination points areprovided.
Mounting positionTransmitter can be mounted in any position.Electronics housing may be rotated to any position. A positive stopprevents over travel.
Mass (without options)7kg to 80kg approx (15 to 65lb) according to specified seal(s)options; add 1.5kg (3.4lb) for AISI housing.Add 650g (1.5lb) for packing.
PackingCarton
(*) Wetted parts of the transmitter.
(**) Bolts and nuts, gasket and mating flange supplied by customer.
(***) Gasket to process supplied by customer.
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
9
ConfigurationTransmitter with HART communication and 4 to 20 mA
Standard configuration
Transmitters are factory calibrated to customer's specified range.Calibrated range and tag number are stamped on the tag plate. If acalibration range and tag data are not specified, the transmitter will besupplied with the plate left blank and configured as follows:
Engineering Unit kPa4 mA Zero20 mA Upper Range Limit (URL)Output LinearDamping 1 sec.Transmitter failure mode UpscaleSoftware tag (8 characters max) BlankOptional LCD indicator/display 0 to 100.0% linear
Any or all the above configurable parameters, including Lower range–valueand Upper range-value which must be the same unit of measure, can beeasily changed using the HART hand–held communicator or by a PCrunning the configuration software SMART VISION with DTM for 2600T.The transmitter database is customized with specified flange type andmaterial, O–ring and drain/vent materials and meter code option.Custom configuration (option)The following data may be specified in addition to the standardconfiguration parameters:
Descriptor 16 alphanumeric charactersMessage 32 alphanumeric charactersDate Day, month, year
For any protocol available engineering units of pressure measure are :Pa, kPa, MPainH2O@4°C, mmH2O@4°C, psiinH2O@20°C, ftH2O@20°C, mmH2O@20°CinHg, mmHg, Torrg/cm2, kg/cm2, atmmbar, bar
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
10
71 (2.80) 144 (5.67)
135
(5.3
1)
+
127 (5.00)17 (0.67)
17 (0.67)
36 (1.42)
B
F G
A D
268DD with DIN housing and direct mount seal S264A/S264E flanged Raised Face extended diaphragm
Harting Hanconnector
Electronic side
Output meterhousing
268DD with barrel housing and direct mount seal S264A/S264E flanged Raised Face flush diaphragm
Certification label
Identification tagAdjustments
Terminal side
Electronicside
Min. clearanceto removethe cover
Output meterhousing
Drain/ventValve
Processconnection
Electricalconnections
MOUNTING DIMENSIONS (not for construction unless certified) - dimensions in mm (in)NOTE: For 268DD, low pressure side opposite to direct mount seal can be a conventional flange or suitable for capillary to remote seal.
Conventional process flange connection (1/4 – 18 NPT direct or 1/2 – 14 NPT through adapter), gasket groove and gaskets are in accordancewith DIN 19213. Bolting threads or fixing adapter for other devices on process flange is 7/16 – 20 UNF.
S
NOSSTIUCRIC
SEL
NOI
NETS
OST U
RREV
UOCE
LRE
DRAG
TNE' M
EF NE BELCI
QUAT
E
ALSTIU
CRIC
IVE
H
COPE
EK
VERTIGT
E
H
WN
!
86 (3.39)
AC
D
E
S
NOSSTIUCRIC
SEL
NOI
NETS
OST U
RREV
UOCE
LRE
DRAG
TNE' M
EF NE BELCI
QUAT
E
ALSTIU
CRIC
IVE
H
COPE
EK
VERTIGT
E
H
WN
!
A
DC
E
17 (0.67)
17 (0
.67)
36
(1.4
2)14
6 (5
.75)
B
50, 100 or 150
(1.97, 3.94 or 5.91)
A
144 (5.67)FG 27
(1.06)
+
25 (0.98) for 1/4 NPT33 (1.30) for 1/2 NPT
flushing thread(s)
flushing ring(OPTION)
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
11
Electricalconnections
(*) Flush, 50, 100 or 150mm (1.97, 3.94 or 5.91in) extension
S
NOSSTIUCRIC
SEL
NOI
NETS
OST U
RREV
UOCE
LRE
DRAG
TNE' M
EF NE BELCI
QUAT
E
ALSTIU
CRIC
IVE
H
COPE
EK
VERTIGT
E
H
WN
!
86 (3.39)
268HD/268ND with barrel housing and direct mount seal S264A/S264E flanged Raised Face extended diaphragmF
G
B
(*)
A
78 (3
.07)
AC
D
E
18 (0
.71)
16
(0.6
3)
100
(3.9
4)
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS
)ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiDfo°N fo°N fo°N fo°N fo°Nseloh seloh seloh seloh seloh)aid(A )aid(A )aid(A )aid(A )aid(A
)aid(B )aid(B )aid(B )aid(B )aid(B )aid(C )aid(C )aid(C )aid(C )aid(C )aid(D )aid(D )aid(D )aid(D )aid(D )aid(E )aid(E )aid(E )aid(E )aid(E FFFFF GGGGGdednetxe dednetxe dednetxe dednetxe dednetxemgarhpaid mgarhpaid mgarhpaid mgarhpaid mgarhpaid
hsulf hsulf hsulf hsulf hsulfmgarhpaid mgarhpaid mgarhpaid mgarhpaid mgarhpaid
gnirgnihsulf gnirgnihsulf gnirgnihsulf gnirgnihsulf gnirgnihsulfaidlanretni aidlanretni aidlanretni aidlanretni aidlanretni
051LCEMSAni2003LCEMSAni2006LCEMSAni2009LCEMSAni20051LCEMSAni2
051LCEMSAni3003LCEMSAni3006LCEMSAni3009LCEMSAni30051LCEMSAni3051LCEMSAni4003LCEMSAni4
)9.1(84)9.1(84
ANANAN
)38.2(27)38.2(27
ANANAN
)7.3(49)7.3(49
)63.2(06)63.2(06)63.2(06)63.2(06)63.2(06
)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98
)44.2(26)44.2(26)44.2(26)44.2(26)44.2(26)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29
)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29
)5(721)5(721)5(721)5(721)5(721
)2.6(2.751)2.6(2.751
)57.4(56.021)5(721)5(721)5.6(561)5.6(561)6(4.251
)26.6(51.861)26.6(51.861
)5.7(5.091)8(2.302)5.7(5.091)88.7(2.002
)6(4.251)5.6(1.561)5.6(1.561)5.8(9.512)5.8(9.512)5.7(5.091)52.8(55.902)52.8(55.902
)84.9(142)5.01(7.662
)9(6.822)01(452
)97.0(02)97.0(02)97.0(02)20.1(62)20.1(62)97.0(02)68.0(22)68.0(22)20.1(62
)52.1(57.13)97.0(02)68.0(22
)57.0(50.91)88.0(53.22
)1(4.52)5.1(1.83)5.1(1.83)49.0(78.32)21.1(44.82)52.1(57.13
)05.1(1.83)88.1(8.74
)49.0(42)62.1(23
)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9
488884888888
gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS
)ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiDfo°N fo°N fo°N fo°N fo°Nseloh seloh seloh seloh seloh)aid(A )aid(A )aid(A )aid(A )aid(A
)aid(B )aid(B )aid(B )aid(B )aid(B )aid(C )aid(C )aid(C )aid(C )aid(C )aid(D )aid(D )aid(D )aid(D )aid(D )aid(E )aid(E )aid(E )aid(E )aid(E FFFFF GGGGGdednetxe dednetxe dednetxe dednetxe dednetxemgarhpaid mgarhpaid mgarhpaid mgarhpaid mgarhpaid
hsulf hsulf hsulf hsulf hsulfmgarhpaid mgarhpaid mgarhpaid mgarhpaid mgarhpaid
gnirgnihsulf gnirgnihsulf gnirgnihsulf gnirgnihsulf gnirgnihsulfaidlanretni aidlanretni aidlanretni aidlanretni aidlanretni
61NPNE05ND04NPNE05ND36NPNE05ND001NPNE05ND
61NPNE08ND04NPNE08ND36NPNE08ND001NPNE08ND61NPNE001ND04NPNE001ND
)9.1(84)9.1(84
ANAN
)38.2(27)38.2(27
ANAN
)7.3(49)7.3(49
)63.2(06)63.2(06)63.2(06)63.2(06
)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98
)44.2(26)44.2(26)44.2(26)44.2(26)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29)26.3(29
)20.4(201)20.4(201)20.4(201)20.4(201)34.5(831)34.5(831)34.5(831)34.5(831)22.6(851)83.6(261
)29.4(521)29.4(521)13.5(531)17.5(541
)3.6(061)3.6(061)7.6(071)80.7(081)80.7(081)84.7(091
)5.6(561)5.6(561)80.7(081)76.7(591)78.7(002)78.7(002)64.8(512)50.9(032)66.8(022)52.9(532
)17.0(81)17.0(81)68.0(22)20.1(62)17.0(81)17.0(81)68.0(22)20.1(62)17.0(81)68.0(22
)97.0(02)97.0(02)20.1(62
)1.1(82)97.0(02)49.0(42
)1.1(82)62.1(23)97.0(02)49.0(42
)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9)73.0(5.9
4444888888
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
12
268DD with barrel housing and direct mount seal S264R flanged Ring Joint flush diaphragm
S
NOSSTIUCRIC
SEL
NOI
NETS
OST U
RREV
UOCE
LRE
DRAG
TNE' M
EF NE BELCI
QUAT
E
ALSTIU
CRIC
IVE
H
COPE
EK
VERTIGT
E
H
WN
!86 (3.39)
AC
D
E
R (groove)
gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS gnitaR/eziS
)ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD )ni(mmsnoisnemiD
RRRRRfo°N fo°N fo°N fo°N fo°Nseloh seloh seloh seloh seloh
)aid(A )aid(A )aid(A )aid(A )aid(A )aid(B )aid(B )aid(B )aid(B )aid(B )aid(C )aid(C )aid(C )aid(C )aid(C )aid(D )aid(D )aid(D )aid(D )aid(D )aid(E )aid(E )aid(E )aid(E )aid(E FFFFF GGGGG )aid(H )aid(H )aid(H )aid(H )aid(H
051LCEMSAni2/1-1003LCEMSAni2/1-1006LCEMSAni2/1-1
0051/009LCEMSAni2/1-10052LCEMSAni2/1-1
051LCEMSAni2003LCEMSAni2006LCEMSAni2
0051/009LCEMSAni20052LCEMSAni2
051LCEMSAni3003LCEMSAni3006LCEMSAni3009LCEMSAni30051LCEMSAni30052LCEMSAni3
)98.1(84)98.1(84)98.1(84)98.1(84)98.1(84)63.2(06)63.2(06)63.2(06)63.2(06)63.2(06
)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98)5.3(98
)72.3(38)45.3(09)45.3(09)26.3(29)94.4(411)20.4(201)52.4(801)52.4(801)88.4(421)42.5(331)42.5(331)57.5(641)57.5(641)01.6(551)16.6(861)16.6(861
)88.3(6.89)5.4(3.411)5.4(3.411
)88.4(421)57.5(1.641)57.4(56.021
)5(721)5(721
)5.6(561)57.6(5.171
)6(4.251)26.6(51.861)26.6(51.861
)5.7(5.091)8(2.302)9(6.822
)5(721)21.6(5.551)21.6(5.551
)7(8.771)8(2.302)6(4.251
)5.6(1.561)5.6(1.561)5.8(9.512
)52.9(532)5.7(5.091
)52.8(55.902)52.8(55.902
)5.9(3.142)5.01(7.662
)21(8.403
)26.0(57.51)88.0(53.22)88.0(53.22)21.1(54.82)52.1(57.13)57.0(50.91)57.0(50.91)57.0(50.91
)1(4.52)21.1(54.82)57.0(50.91)88.0(53.22)88.0(53.22
)1(4.52)52.1(57.13)83.1(50.53
)96.0(5.71)18.0(6.02)88.0(4.22)52.1(8.13)57.1(5.44)57.0(50.91)88.0(53.22
)1(4.52)5.1(1.83
)2(8.05)49.0(78.32)21.1(44.82)52.1(57.13
)05.1(1.83)88.1(8.74)26.2(5.66
)86.0(3.71)86.0(3.71)86.0(3.71)28.0(8.02)28.0(8.02)86.0(3.71)86.0(3.71)86.0(3.71)28.0(8.02)28.0(8.02)86.0(3.71)86.0(3.71)86.0(3.71)28.0(8.02)28.0(8.02)28.0(8.02
)65.2(1.56)96.2(3.86)96.2(3.86)96.2(3.86)52.3(6.28)52.3(6.28)52.3(6.28)52.3(6.28)57.3(3.59
)4(6.101)5.4(3.411)78.4(8.321)78.4(8.321)78.4(8.321)73.5(5.631
)5(721
91R02R02R02R32R22R32R32R42R62R92R13R13R13R53R23R
4444448888488888
F GBA
144 (5.67)
135
(5.3
1)
+
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
H
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
13
268DD with barrel housing and direct mount seal S264M off-line flanged
268HD/268ND with barrel housing and direct mount seal S264M off-line flanged
noitcennoC )ni(mmsnoisnemiD
eziS dradnatS )aid(A )aid(B)sduts4(C
)aid(D )aid(E FhtgneL daerhT
1/2 ni051LCEMSA )33.4(011 )83.2(5.06 )35.1(93 CNU31–ni2/1
)83.1(1.53 )26.0(8.51 )60.0(6.1003LCEMSA )33.4(011 )26.2(5.66 )35.1(93 CNU31–ni2/1
ni1051LCEMSA )33.4(011 )21.3(4.97 )35.1(93 CNU31–ni2/1
)2(8.05 )50.1(7.62 )60.0(6.1003LCEMSA )88.4(421 )5.3(9.88 )2(15 CNU11–ni8/5
1 1/2 ni051LCEMSA )5(721 )78.3(4.89 )35.1(93 CNU31–ni2/1
)78.2(37 )16.1(14 )60.0(6.1003LCEMSA )1.6(551 )5.4(3.411 )42.2(75 CNU01–ni4/3
52ND 04-61NPNE )25.4(511 )43.3(58 )56.1(24 21M )76.2(86 )21.1(5.82 )70.0(204ND 04-61NPNE )9.5(051 )33.4(011 )98.1(84 61M )64.3(88 )96.1(1.34 )21.0(3
71 (2.80) 135 (5.31)
135
(5.3
1)+
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
63.5 (2.5)
D
F
E B A
C
Gasket seat finish
16
(0.6
3)
100
(3.9
4)
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
70 (2
.76)
18 (0
.71)
18 (0
.71)
63.5
(2.5
)
D
FE
dia 110
(4.33)
BA
C Gasket seat finish
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
14
268DD with barrel housing and direct mount seal S264T off-line threaded
268HD/268ND with barrel housing and direct mount seal S264T off-line threaded
eziS)ni(mmsnoisnemiD
)aid(D Q
1/4 TPNni )3.4(2.901 )1.2(3.35
1/2 TPNni )3.4(2.901 )1.2(3.35
3/4 TPNni )3.4(2.901 )5.2(5.36
TPNni1 )3.4(2.901 )5.2(5.36
1 1/2 TPNni )3.4(2.901 )5.2(5.36
71 (2.80) 135 (5.31)
135
(5.3
1)
+
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
D
Q
16
(0.6
3)
100
(3.9
4)
127 (5.00)
17 (0.67) 17 (0.67)36 (1.42)
70 (2
.76)
D
Q
18 (0
.71)
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
15
Electrical connectionsHART Version
+
+
-
-
++
--691HT
A B C
1
D E F
2
G H I
3
J K L
4
M N O
5
P Q R
6
S T U
7
V W X
8
Y Z #
9
@ % & /
0
+-
PV
REVIEW SERIALLINK
TRIM
F1 F2 F3 F4
CONF
M
Kent-Taylor
0
43
56 7 8
9
1020
40
0
60
100%
2 80
M+
-
- 1
54 6
23 8
7
+
TEST COMM
Test points4 to 20mA
Hartingpin (male)
identification
Internal groundtermination point
External groundtermination point
Hand-heldcommunicator
GND
Line load
Remoteindicator
Powersource
250 ohm min
Receiver
HART hand-held communicator may be connected at any wiring termination point in the loop, providing the minimum resistanceis 250 ohm. If this is less than 250 ohm, additional resistance should be added to allow communications
Optional
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
16
BASIC ORDERING INFORMATION model 268DD Safety Differential Pressure Transmitterwith direct mount sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 8 D D X S X X X X X
%570.0YCARUCCAESAB–)s(laestnuomtceridhtiwrettimsnarTerusserPlaitnereffiDytefaS
–stimilnapS-ROSNES 6 ht retcarahcaPk61dna45.0aPk04dna76.0
aPk56dna1.1aPk061dna76.2
aPk006dna01aPk0042dna04
aPk0008dna431aPk00061dna762
rabm061dna4.5rabm004dna7.6rabm056dna11
rabm0061dna7.62rab6dna1.0
rab42dna4.0rab08dna43.1
rab061dna76.2
Hni46dna61.2 2OHni061dna76.2 2OHni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
EFGHMPQS
edocesU 7– ht retcarahc S
)strapdettew(diulflliF/lairetammgarhpaiD 8– ht retcarahc
ssL613ISIA)taesISIAno(™672CyolletsaH
™672CyolletsaH™004lenoM
mulatnaTssL613ISIA
)taesISIAno(™672CyolletsaH™672CyolletsaH
™004lenoMmulatnaT
ssL613ISIA)taesISIAno(™672CyolletsaH
™672CyolletsaH™004lenoM
mulatnaTssL613ISIAssL613ISIAssL613ISIA
lioenociliSlioenociliSlioenociliSlioenociliSlioenociliS
nedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenInedlaG-diulftrenI
nobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenInobracolaH-diulftrenI
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenI
)yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotlaeseno()yletarapesdetouqebotslaesowt()yletarapesdetouqebotslaesowt()yletarapesdetouqebotslaesowt(
)1etoN()1etoN()1etoN()1etoN()1etoN()1etoN()1etoN()1etoN()1etoN()1etoN(
)1etoN()1etoN(
ECANECANECANECAN
ECANECANECANECAN
ECANECANECANECAN
SHKMTABFCDLQP45R2W
)strapdettew(noitcennocdnalairetamsretpada/segnalfssecorP – 9 ht retcarahc
noitcurtsnocslaesowtrofssL613ISIA)noitcennoclatnoziroH(ssL613ISIA)noitcennoclatnoziroH(ssL613ISIA
1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–1/4 (tceridf-TPN81– 7/ 61 )gnillird.S.UFNU02–1/2 (retpadahguorhtf-TPN41– 7/ 61 )gnillird.S.UFNU02–
)2etoN()3etoN()3etoN(
)4,3setoN()4,3setoN()4,3setoN()4,3setoN(
ECANECANECANECANECANECANECAN
RAB
)noitcennoclatnoziroH(™672CyolletsaH)noitcennoclatnoziroH(™672CyolletsaH
DE
)noitcennoclatnoziroH(™004lenoM)noitcennoclatnoziroH(™004lenoM
GH
)strapdettew(teksaG/stloB 01– ht retcarahc
noitcurtsnocslaesowtrofsteksagtuohtiw)ECAN(ss613ISIAnoitcurtsnocslaesowtrofsteksagtuohtiwss613ISIA
ss613ISIAss613ISIA
)ECAN(ss613ISIA)ECAN(ss613ISIA
™notiVEFTP™notiV
EFTP
)2etoN()2etoN()3etoN(
)3,1setoN()3etoN(
)3,1setoN(
ECAN
ECANECAN
RS1234
noitcennoclacirtcelednalairetamgnisuoH 11– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA)noisrevNID(yollamuinimulA
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
rotcennocnaHgnitraH1/2 TPN41–
)02MC(5.1x02M5.31gP
1/2 KGrotcennocnaHgnitraH
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
)02MC(5.1x02M5.31gP
rotcennocnaHgnitraH
)ylnoesopruplareneg(
)ylnoesopruplareneg(
)ylnoesopruplareneg()ylnoesopruplareneg()ylnoesopruplareneg(
)5etoN(
)5etoN(
)5etoN(
ABDCEHLNMPSTVUJYK
snoitpolanoitiddA/tuptuO 21– ht retcarahc
)2LIS(Am02ot4dnanoitacinummoclatigidTRAH)2LIS(Am02ot4dnanoitacinummoclatigidTRAH
snoitpolanoitiddaoN)edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)6etoN( S4
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
17
ADDITIONAL ORDERING INFORMATION for model 268DDAdd one or more 2-digit code(s) after the basic ordering information to select all required options
XX XX XX XX XX XX XX XX XX XX XX
)strapdettew()noitisopdnalairetam(evlavtnev/niarDssL613ISIAssL613ISIAssL613ISIA
™672CyolletsaH™672CyolletsaH™672CyolletsaH
™004lenoM™004lenoM™004lenoM
sixassecorpnopotedisegnalfno
mottobedisegnalfnosixassecorpno
potedisegnalfnomottobedisegnalfno
sixassecorpnopotedisegnalfno
mottobedisegnalfno
)7etoN()7etoN()7etoN()8etoN()8etoN()8etoN()9etoN()9etoN()9etoN(
ECANECANECANECANECANECANECANECANECAN
1V2V3V4V5V6V7V8V9V
noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA
dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–
htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–aixEE)aissuR(TSOGdxEE)aissuR(TSOG
aixEE)natsikazaK(TSOGdxEE)natsikazaK(TSOG
aixEE)lizarB(ortemnIdxEE)lizarB(ortemnILnxEE)lizarB(ortemnI
1E2E4E6E1W2W3W4W5W6W7W
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanAelacs01–0toorerauqsrotacidnituptuogolanA
)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA)elacstoorerauqsrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
1D2D3D4D5D6D7D8D
egruSrotcetorPtneisnarT/egruS 1S
launamgnitarepOnamreG
nailatIhcnerF
1M2M4M
egaugnalgat&slebaLnamreG
nailatIhsinapS
hcnerF
1T2T3T4T
etalpgatlanoitiddAetalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoCHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
setacifitreC
)tniop-9(noitarbilacfo1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfo1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
yrtnethgiarts–naHgnitraHyrtneelgna–naHgnitraH
)01etoN()01etoN(
3U4U
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
18
Note 1: Suitable for oxygen service
Note 2: Not available with low side diaphragm code S, H, K, M, T, A, B, F, C, D, L, Q, P, 4, 5
Note 3: Not available with low side diaphragm code R, 2, W
Note 4: Not available with diaphragm material/fill fluid code S, H, A, B, L, Q
Nota 5: Select type in additional ordering code
Note 6: Not available with Electronic Housing code P, E, K
Note 7: Not available with Process flanges/adapters code D, E, G, H, R
Note 8: Not available with Process flanges/adapters code A, B, G, H, R
Note 9: Not available with Process flanges/adapters code A, B, D, E, R
Note 10: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B, J, Y
Standard delivery items (can be differently specified by additional ordering code)– Adapters supplied loose
– Plug on axis (no drain/vent valves)
– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
19
BASIC ORDERING INFORMATION model 268HD Safety Gauge Pressure Transmitterwith direct mount sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 8 H D X X X X X
%570.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPeguaGytefaS
–stimilnapS-ROSNES 6 ht retcarahcaPk56dna1.1
aPk061dna76.2aPk006dna01
aPk0042dna04aPk0008dna431
aPk00061dna762
rabm056dna11rabm0061dna7.62
rab6dna1.0rab42dna4.0
rab08dna43.1rab061dna76.2
Hni062dna53.4 2OHni246dna7.01 2Oisp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
GHMPQS
diulflliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenI)1etoN()1etoN(
R2W
noitcennocssecorP – 8 ht retcarahc
laestnuomtceriD )yletarapesdetouqebot( M
noitcennoclacirtcelednalairetamgnisuoH 9– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
rotcennocnaHgnitraH1/2 TPN41–
)02MC(5.1x02M5.31gP
1/2 KGrotcennocnaHgnitraH
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
)ylnoesopruplareneg(
)ylnoesopruplareneg(
)2etoN(
)2etoN(
ABDCEHLNMPSTVU
snoitpolanoitiddA/tuptuO 01– ht retcarahc
)2LIS(Am02ot4dnanoitacinummoclatigidTRAH)2LIS(Am02ot4dnanoitacinummoclatigidTRAH
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)3etoN( S4
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
20
ADDITIONAL ORDERING INFORMATION for model 268HDAdd one or more 2-digit code(s) after the basic ordering information to select all required options
Note 1: Suitable for oxygen service
Note 2: Select type in additional ordering code
Note 3: Not available with Electronic Housing code P, E
Note 4: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B
Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
XX XX XX XX XX XX XX XX XX XX
noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA
dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–
htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–aixEE)aissuR(TSOGdxEE)aissuR(TSOG
aixEE)natsikazaK(TSOGdxEE)natsikazaK(TSOG
aixEE)lizarB(ortemnIdxEE)lizarB(ortemnILnxEE)lizarB(ortemnI
1E2E4E6E1W2W3W4W5W6W7W
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
1D2D3D5D7D8D
egruS
rotcetorPtneisnarT/egruS 1S
launamgnitarepO
namreGnailatIhcnerF
1M2M4M
egaugnalgat&slebaL
namreGnailatI
hsinapShcnerF
1T2T3T4T
etalpgatlanoitiddA
etalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoC
Hni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
setacifitreC
)tniop-9(noitarbilacfo1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfo1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
yrtnethgiarts–naHgnitraHyrtneelgna–naHgnitraH
)4etoN()4etoN(
3U4U
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
21
BASIC ORDERING INFORMATION model 268ND Safety Absolute Pressure Transmitterwith direct mount sealSelect one character or set of characters from each category and specify complete catalog number.Refer to additional ordering information code and specify one or more codes for each transmitter if additional options are required.
LEDOMESAB 1– ts 5ot ht sretcarahc 2 6 8 N D X X X X X
%570.0YCARUCCAESAB–laestnuomtceridhtiwrettimsnarTerusserPetulosbAytefaS
–stimilnapS-ROSNES 6 ht retcarahcaPk56dna1.1
aPk061dna76.2aPk006dna01
aPk0042dna04aPk0008dna431
aPk00061dna762
rabm056dna11rabm0061dna7.62
rab6dna1.0rab42dna4.0
rab08dna43.1rab061dna76.2
gHmm084dna8gHmm0021dna02
isp78dna54.1isp843dna8.5
isp0611dna4.91isp0232dna7.83
GHMPQS
diulflliF/lairetammgarhpaiD 7– ht retcarahcssL613ISIAssL613ISIAssL613ISIA
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenI)1etoN()1etoN(
R2W
noitcennocssecorP – 8 ht retcarahc
laestnuomtceriD )yletarapesdetouqebot( M
noitcennoclacirtcelednalairetamgnisuoH 9– ht retcarahc
)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA)noisrevlerraB(yollamuinimulA
)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA)noisrevlerraB(eerf-reppocyollamuinimulA
)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA)noisrevlerraB(ssL613ISIA
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
rotcennocnaHgnitraH1/2 TPN41–
)02MC(5.1x02M5.31gP
1/2 KGrotcennocnaHgnitraH
1/2 TPN41–)02MC(5.1x02M
5.31gP1/2 KG
)ylnoesopruplareneg(
)ylnoesopruplareneg(
)2etoN(
)2etoN(
ABDCEHLNMPSTVU
snoitpolanoitiddA/tuptuO 01– ht retcarahc
)2LIS(Am02ot4dnanoitacinummoclatigidTRAH)2LIS(Am02ot4dnanoitacinummoclatigidTRAH
snoitpolanoitiddaoN)"edocgniredrolanoitiddA"ybderedroebot(detseuqersnoitpO
)3etoN( S4
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
22
Note 1: Suitable for oxygen service
Note 2: Select type in additional ordering code
Note 3: Not available with Electronic Housing code P, E
Note 4: Not available with Electronic housing code U, S, T, V, H, M, L, N, D, C, A, B
Standard delivery items (can be differently specified by additional ordering code)– General purpose (no electrical certification)
– No meter/display, no mounting bracket, no surge protection
– English manual and labels
– Configuration with kPa and deg. C units
– No test, inspection or material traceability certificates
THE SELECTION OF SUITABLE WETTED PARTS AND FILLING FLUID FOR COMPATIBILITY WITH THE PROCESS MEDIA IS A CUSTOMER'SRESPONSIBILITY, IF NOT OTHERWISE NOTIFIED BEFORE MANUFACTURING.
ADDITIONAL ORDERING INFORMATION for model 268NDAdd one or more 2-digit code(s) after the basic ordering information to select all required options
XX XX XX XX XX XX XX XX XX XX
noitacifitreclacirtcelEaixEEytefaScisnirtnI–DG1yrogetaCIIpuorGXETA
dxEEfoorpemalF–DG2/1yrogetaCIIpuorGXETAylno()ASC(noitaicossAdradnatSnaidanaC 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–
htiwylno(lavorppa)MF(lautuMyrotcaF 1/2 )noitcennoclacirtcele5.31gPdna02M,TPN41–aixEE)aissuR(TSOGdxEE)aissuR(TSOG
aixEE)natsikazaK(TSOGdxEE)natsikazaK(TSOG
aixEE)lizarB(ortemnIdxEE)lizarB(ortemnILnxEE)lizarB(ortemnI
1E2E4E6E1W2W3W4W5W6W7W
retemtuptuO
noitarbilacdradnatS,reteMorPnoitarbilaclaicepS,reteMorP
elacs%001–0raenilrotacidnituptuogolanA)elacsraenilrofdeificepsebot(noitaudarglaiceps,rotacidnituptuogolanA
)reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP)noitarugifnocremotsuc–reteMoC(rotarugifnocTRAHdnaretemlangiselbammargorP
1D2D3D5D7D8D
egruS
rotcetorPtneisnarT/egruS 1S
launamgnitarepO
namreGnailatIhcnerF
1M2M4M
egaugnalgat&slebaL
namreGnailatI
hsinapShcnerF
1T2T3T4T
etalpgatlanoitiddA
etalpleetssselniatsnogatfognitnirpresaL 2I
noitarugifnoC
Hni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 F.ged=erutarepmeT;C°4taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°02taisp/OHni=erusserP–dradnatS 2 C.ged=erutarepmeT;C°4taisp/O
motsuC
2N3N4N5N6N
setacifitreC
)tniop-9(noitarbilacfo1.3–40201NEetacifitrecnoitcepsnIngisedtnemurtsnifo1.2–40201NEredroehthtiwecnailpmocfoetacifitreC
1C6C
ytilibaecartlairetaM
strapdettewssecorpfo1.2–40201NEredroehthtiwecnailpmocfoetacifitreCstrapdettewssecorpfo1.3–40201NEetacifitrecnoitcepsnI
1H3H
rotcennoC
yrtnethgiarts–naHgnitraHyrtneelgna–naHgnitraH
)4etoN()4etoN(
3U4U
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
23
BASIC ORDERING INFORMATION model S264T Off-line threaded sealSelect one character or set of characters from each category and specify complete catalog number.
Note 1: Not available with capillary protection code A, B
Note 2: Not available with capillary protection code N
Note 3: Suitable for oxygen service
Note 4: Suitable for food application
Note 5: Not available with size code 4
LEDOMESAB 1– ts 5ot ht sretcarahc S 2 6 4 T X X X X X X X X X X
laesdedaerhtenil-ffO
–noitcennocfoedisrettimsnarT 6 ht retcarahcedishgiHediswoL
HL
eziS 7– ht retcarahc1/4 f-TPNni1/2 f-TPNni3/4 f-TPNni
f-TPNni1-1 1/2 f-TPNni
12534
stloB – 8 ht retcarahc
ssL613ISIAleetsnobraC
leetsyollA ECAN
123
lairetamegnalF 9– ht retcarahc
ss613ISIA™672CyolletsaH
ECANECAN
12
lairetammgarhpaiD 01– ht retcarahc
ssL613ISIA™672CyolletsaH™0002CyolletsaH
526lenocnImulatnaT
detalpdlogssL613ISIA
ECANECANECANECAN
SHMLTN
noitcetorpyrallipaC 11– ht retcarahc
ruomrassL613ISIArevocevitcetorpCVPhtiwruomrassL613ISIA
laestnuomtceridrofebutnoisnetxE
)ERUTAREPMETHGIHROFDEDNEMMOCER( ABN
)teef(mhtgnelyrallipaC 21– ht retcarahc
noitcurtsnoctnuomtceridroftrohslanretnI)3(1
)5(5.1)7(2
)8(5.2)01(3
)21(5.3)31(4
)51(5.4)71(5
)81(5.5)02(6
)22(5.6)32(7
)52(5.7)72(8)03(9
)1etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN(
1ABCDEFGHJKLMNPQR
diulflliF 31– ht retcarahc
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenIllifBBA
erutarepmethgihroflioenocilISerutarepmetwolrofremylopenociliS
)devorppaADF(liolareniM)devorppaADF(lioelbategeV
)devorppaADF(retaw-nirecylG
)3etoN()3etoN(
)4etoN()4etoN()4etoN(
SNDKHCWAB
snoitcennocgnihsulF 41– ht retcarahc
deriuqertoNdedivorP )5etoN(
1Q
teksaG 51– ht retcarahc
EFTP™notiV
etihparG
237
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
24
BASIC ORDERING INFORMATION model S264A Flanged seal (flush and extended) - Raised Face
Select one character or set of characters from each category and specify complete catalog number.
LEDOMESAB 1– ts 5ot ht sretcarahc S 2 6 4 A X X X X X X X X X X d'tnoC
5.61BEMSAot)dednetxednahsulf(laesdegnalF
–noitcennocfoedisrettimsnarT 6 ht retcarahc
edishgiHediswoL
HL
egnalfgnitnuoM 7– ht retcarahc
gnitatoR R
eziS – 8 ht retcarahc
ni2ni3ni4
CDE
gnitaR – 9 ht retcarahc
051LCEMSA003LCEMSA006LCEMSA009LCEMSA
0051LCEMSA
)ezisni4htiwelbaliavatoN()ezisni4htiwelbaliavatoN()ezisni4htiwelbaliavatoN(
)1etoN()1etoN()1etoN(
12345
lairetamegnalfgnitnuoM 01– ht retcarahc
leetsnobraCss613ISIA
AB
lairetamdnahtgnelsnoisnetxE 11– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051
ssL613ISIA™672yolletsaH
ssL613ISIA™672yolletsaH
ssL613ISIA™672yolletsaH
)2etoN()2etoN()2etoN()2etoN()2etoN()2etoN(
F123456
)laes(lairetammgarhpaiD 21– ht retcarahc
ssL613ISIA™672CyolletsaH
)mgarhpaiddednetxerofton(-™0002CyolletsaH)mgarhpaiddednetxerofton(-526lenocnI
)mgarhpaiddednetxerofton(-mulatnaT)mgarhpaiddednetxerofton(-detalpdlogssL613ISIA
gnitaockcits–itnahtiwssL613ISIAgnitaockcits–itnahtiw™672CyolletsaH
gnitaockcits-itnadnanoisorroc-itnahtiwssL613ISIA)tnemtaertnoisarbAitnAhtiwISIA(xelfaiD
)mgarhpaiddednetxerofton(-)974ASMTSAot05723SSNU(ssxelpudrepuS
)3etoN(
)4etoN()4etoN()4etoN()4etoN()3etoN(
)3etoN()3etoN()4etoN(
ECANECANECANECAN
ECANECANECAN
SHMLTNKYWFE
hsinifecafruslaeS 31– ht retcarahc
detarreShtoomS
)5,3setoN( 12
noitcetorpyrallipaC 41– ht retcarahc
ruomrassL613ISIArevocevitcetorpCVPhtiwruomrassL613ISIA
laestnuomtceridrofebutnoisnetxE
)ERUTAREPMETHGIHROFDEDNEMMOCER( ABN
)teef(mhtgnelyrallipaC 51– ht retcarahc
noitcurtsnoctnuomtceridroftrohslanretnI)3(1
)5(5.1)7(2
)8(5.2)01(3
)21(5.3)31(4
)51(5.4)71(5
)81(5.5)02(6
)22(5.6)32(7
)52(5.7)72(8)03(9)33(01)04(21)74(41)35(61
)6etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN()7etoN(
1ABCDEFGHJKLMNPQRSTUV
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
25
Note 1: Not available with size code E
Note 2: Not available with mounting flange rating code 3, 4, 5
Note 3: Not available with extensions length and material code 2, 4, 6
Note 4: Not available with extensions length and material code 1, 2, 3, 4, 5, 6
Note 5: Not available with mounting flange size code C
Note 6: Not available with diaphragm material code H, T, N, K, Y, W
Note 7: Not available with capillary protection code A, B
Note 8: Not available with capillary protection code N
Note 9: Suitable for oxygen service
Note 10: Suitable for food application
Note 11: Not available with Flushing ring: hole and thread code 2, 3, 4, 5
Note 12: Not available with Flushing ring: hole and thread code N
Note 13: Not available with Seal surface finish code 1
A462SNOITAMROFNIGNIREDROCISAB X X X X X
diulflliF 61– ht retcarahc
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenIllifBBA
erutarepmethgihroflioenocilISerutarepmetwolrofremylopenociliS
)devorppaADF(liolareniM)devorppaADF(lioelbategeV
)devorppaADF(retaw-nirecylG
)8etoN()8etoN(
)9etoN()9etoN()9etoN(
SNDKHCWAB
noitacifitreC 71– ht retcarahc
enoN 1
daerhtdnaeloh:gnirgnihsulF 81– ht retcarahc
enoNTPNni2/1-eloh1TPNni2/1-seloh2
TPNni4/1-eloh1TPNni4/1-seloh2
N2345
lairetamgnirgnihsulF 91– ht retcarahc
enoNssL613ISIA
672CyolletsaH
)01etoN()11etoN(
)21,11setoN(
NAH
teksagdnagulp:gnirgnihsulF 02– ht retcarahc
teksagon-gulpoNkcolrag-gulpoN
EFTP-gulpoNetihparg-gulpoN
teksagon-ssL613ISIAkcolrag-ssL613ISIA
EFTP-ssL613ISIAetihparg-ssL613ISIA
teksagon-672CyolletsaHkcolrag-672CyolletsaH
EFTP-672CyolletsaHetihparg-672CyolletsaH
)11etoN()11etoN()11etoN(
)31,11setoN()31,11setoN()31,11setoN()31,11setoN()41,11setoN()41,11setoN()41,11setoN()41,11setoN(
NABCDEFGHLMP
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
26
BASIC ORDERING INFORMATION model S264E Flanged seal (flush and extended)Select one character or set of characters from each category and specify complete catalog number.
LEDOMESAB 1– ts 5ot ht sretcarahc S 2 6 4 E X X X X X X X X X X d'tnoC
1-2901NEot)dednetxednahsulf(laesetomeRdegnalF
–noitcennocfoedisrettimsnarT 6 ht retcarahc
edishgiHediswoL
HL
egnalfgnitnuoM 7– ht retcarahc
gnitatoR R
eziS – 8 ht retcarahc
05ND08ND001ND
CDE
gnitaR – 9 ht retcarahc
61NP04NP36NP001NP
)ezis001NDroftoN()ezis001NDroftoN(
)1etoN()1etoN(
1234
lairetamegnalfgnitnuoM 01– ht retcarahc
leetsnobraCss613ISIA
AB
lairetamdnahtgnelsnoisnetxE 11– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF)ni2(mm05)ni2(mm05)ni4(mm001)ni4(mm001)ni6(mm051)ni6(mm051
ssL613ISIA™672yolletsaH
ssL613ISIA™672yolletsaH
ssL613ISIA™672yolletsaH
)2etoN()2etoN()2etoN()2etoN()2etoN()2etoN(
F123456
)laes(lairetammgarhpaiD 21– ht retcarahc
ssL613ISIA™672CyolletsaH
)mgarhpaiddednetxerofton(-™0002CyolletsaH)mgarhpaiddednetxerofton(-526lenocnI
)mgarhpaiddednetxerofton(-mulatnaT)mgarhpaiddednetxerofton(-detalpdlogssL613ISIA
gnitaockcits-itnahtiwssL613ISIAgnitaockcits-itnahtiw™672CyolletsaH
gnitaockcits-itnadnanoisorroc-itnahtiwssL613ISIA)tnemtaertnoisarbAitnAhtiwISIA(xelfaiD
)mgarhpaiddednetxerofton(-)974ASMTSAot05723SSNU(ssxelpudrepuS
)3etoN(
)4etoN()4etoN()4etoN()4etoN()3etoN(
)3etoN()3etoN()4etoN(
ECANECANECANECAN
ECANECANECAN
SHMLTNKYWFE
hsinifecafruslaeS 31– ht retcarahc
detarreShtoomS
)5,3setoN( 12
noitcetorpyrallipaC 41– ht retcarahc
ruomrassL613ISIArevocevitcetorpCVPhtiwruomrassL613ISIA
laestnuomtceridrofebutnoisnetxE
)ERUTAREPMETHGIHROFDEDNEMMOCER( ABN
)teef(mhtgnelyrallipaC 51– ht retcarahc
noitcurtsnoctnuomtceridroftrohslanretnI)3(1
)5(5.1)7(2
)8(5.2)01(3
)21(5.3)31(4
)51(5.4)71(5
)81(5.5)02(6
)22(5.6)32(7
)52(5.7)72(8)03(9)33(01)04(21)74(41)35(61
1ABCDEFGHJKLMNPQRSTUV
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
27
Note 1: Not available with size code E
Note 2: Not available with mounting flange rating code 3, 4
Note 3: Not available with extensions length and material code 2, 4, 6
Note 4: Not available with extensions length and material code 1, 2, 3, 4, 5, 6
Note 5: Not available with diaphragm material code H, T, N, W
Note 6: Not available with capillary protection code A, B
Note 7: Not available with capillary protection code N
Note 8: Suitable for oxygen service
Note 9: Suitable for food application
Note 10: Not available with Flushing ring: hole and thread code 2, 3, 4, 5
Note 11: Not available with Flushing ring: hole and thread code N
E462SNOITAMROFNIGNIREDROCISAB X X X X X
diulflliF 61– ht retcarahc
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenIllifBBA
erutarepmethgihroflioenocilISerutarepmetwolrofremylopenociliS
)devorppaADF(liolareniM)devorppaADF(lioelbategeV
)devorppaADF(retaw-nirecylG
)8etoN()8etoN(
)9etoN()9etoN()9etoN(
SNDKHCWAB
noitacifitreC 71– ht retcarahc
enoN 1
daerhtdnaeloh:gnirgnihsulF 81– ht retcarahc
enoNTPNni2/1-eloh1TPNni2/1-seloh2
TPNni4/1-eloh1TPNni4/1-seloh2
N2345
lairetamgnirgnihsulF 91– ht retcarahc
enoNssL613ISIA
672CyolletsaH
)01etoN()11etoN(
)21,11setoN(
NAH
teksagdnagulp:gnirgnihsulF 02– ht retcarahc
teksagon-gulpoNkcolrag-gulpoN
EFTP-gulpoNetihparg-gulpoN
teksagon-ssL613ISIAkcolrag-ssL613ISIA
EFTP-ssL613ISIAetihparg-ssL613ISIA
teksagon-672CyolletsaHkcolrag-672CyolletsaH
EFTP-672CyolletsaHetihparg-672CyolletsaH
)11etoN()11etoN()11etoN(
)31,11setoN()31,11setoN()31,11setoN()31,11setoN()41,11setoN()41,11setoN()41,11setoN()41,11setoN(
NABCDEFGHLMP
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
28
BASIC ORDERING INFORMATION model S264R Flanged seal - Ring JointSelect one character or set of characters from each category and specify complete catalog number.
LEDOMESAB 1– ts 5ot ht sretcarahc S 2 6 4 R X X X X X X X X X X d'tnoC
5.61BEMSAottniojgniRlaesdegnalF
–noitcennocfoedisrettimsnarT 6 ht retcarahc
edishgiHediswoL
HL
egnalfgnitnuoM 7– ht retcarahc
gnitatoR R
eziS – 8 ht retcarahc
ni2/1-1ni2ni3
BCD
gnitaR – 9 ht retcarahc
051LCEMSA003LCEMSA006LCEMSA009LCEMSA
0051LCEMSA0052LCEMSA
123456
lairetamegnalfgnitnuoM 01– ht retcarahc
leetsnobraCss613ISIA
AB
lairetamdnahtgnelsnoisnetxE 11– ht retcarahc
)lairetammgarhpaidroftxenees(hsulF F
lairetammgarhpaiD 21– ht retcarahc
ssL613ISIA™672CyolletsaH
526lenocnI
ECANECANECAN
SHL
hsinifecafruslaeS 31– ht retcarahc
tniojgniR 3
noitcetorpyrallipaC 41– ht retcarahc
ruomrassL613ISIArevocevitcetorpCVPhtiwruomrassL613ISIA
laestnuomtceridrofebutnoisnetxE
)ERUTAREPMETHGIHROFDEDNEMMOCER( ABN
)teef(mhtgnelyrallipaC 51– ht retcarahc
noitcurtsnoctnuomtceridroftrohslanretnI)3(1
)5(5.1)7(2
)8(5.2)01(3
)21(5.3)31(4
)51(5.4)71(5
)81(5.5)02(6
)22(5.6)32(7
)52(5.7)72(8)03(9)33(01)04(21)74(41)35(61
)1etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN()2etoN(
1ABCDEFGHJKLMNPQRSTUV
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
29
Note 1: Not available with capillary protection code A, B
Note 2: Not available with capillary protection code N
Note 3: Suitable for oxygen service
Note 4: Suitable for food application
R462SNOITAMROFNIGNIREDROCISAB X X X X X
diulflliF 61– ht retcarahc
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenIllifBBA
erutarepmethgihroflioenocilISerutarepmetwolrofremylopenociliS
)devorppaADF(liolareniM)devorppaADF(lioelbategeV
)devorppaADF(retaw-nirecylG
)3etoN()3etoN(
)4etoN()4etoN()4etoN(
SNDKHCWAB
noitacifitreC 71– ht retcarahc
enoN 1
daerhtdnaeloh:gnirgnihsulF 81– ht retcarahc
dettiftoN N
lairetamgnirgnihsulF 91– ht retcarahc
enoN N
teksagdnagulp:gnirgnihsulF 02– ht retcarahc
enoN N
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
30
BASIC ORDERING INFORMATION model S264M Off-line mini-flanged sealSelect one character or set of characters from each category and specify complete catalog number.
Note 1: Not available with size/mounting flange rating code M, N
Note 2: Not available with size/mounting flange rating code A, B, C, D, 6, 7
Note 3: Not available with capillary protection code A, B
Note 4: Not available with capillary protection code N
Note 5: Suitable for oxygen service
Note 6: Suitable for food application
LEDOMESAB 1– ts 5ot ht sretcarahc S 2 6 4 M X X X X X X X X X X
laesdegnalf-inimenil-ffO
–noitcennocfoedisrettimsnarT 6 ht retcarahcedishgiHediswoL
HL
egnalfgnitnuoM 7– ht retcarahclaeshtiwlargetnI P
gnitaregnalfgnitnuoM/eziS – 8 ht retcarahc
1/2 ni1/2 ni
ni1ni1
1 1/2 ni1 1/2 ni
52ND04ND
051LCEMSA003LCEMSA051LCEMSA003LCEMSA051LCEMSA003LCEMSA
04/61NPNE04/61NPNE
67ACBDMN
)laes(mroftaeS/egnalfgnitnuoM 9– ht retcarahc
ss613ISIAss613ISIA
™672CyolletsaH™672CyolletsaH
hsinifdetarres–)ecafdesiar(FRmroFhsinifdetarres–1BepyT1-2901NE
hsinifdetarres–)ecafdesiar(FRmroFhsinifdetarres–1BepyT1-2901NE
)1etoN()2etoN()1etoN()2etoN(
ECANECANECANECAN
DLUV
)laes(lairetammgarhpaiD 01– ht retcarahc
ssL613ISIA™672CyolletsaH™0002CyolletsaH
526lenocnImulatnaT
detalpdlogssL613ISIA
ECANECANECANECAN
SHMLTN
noitcetorpyrallipaC 11– ht retcarahc
ruomrassL613ISIArevocevitcetorpCVPhtiwruomrassL613ISIA
laestnuomtceridrofebutnoisnetxE
)ERUTAREPMETHGIHROFDEDNEMMOCER( ABN
)teef(mhtgnelyrallipaC 21– ht retcarahc
noitcurtsnoctnuomtceridroftrohslanretnI)3(1
)5(5.1)7(2
)8(5.2)01(3
)21(5.3)31(4
)51(5.4)71(5
)81(5.5)02(6
)22(5.6)32(7
)52(5.7)72(8)03(9
)3etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN()4etoN(
1ABCDEFGHJKLMNPQR
diulflliF 31– ht retcarahc
lioenociliSnedlaG-diulftrenI
nobracolaH-diulftrenIllifBBA
erutarepmethgihroflioenocilISerutarepmetwolrofremylopenociliS
)devorppaADF(liolareniM)devorppaADF(lioelbategeV
)devorppaADF(retaw-nirecylG
)5etoN()5etoN(
)6etoN()6etoN()6etoN(
SNDKHCWAB
snoitcennocgnihsulF 41– ht retcarahc
deriuqertoNdedivorP
1Q
teksaG 51– ht retcarahc
EFTP™notiV
etihparG
237
2600T Pressure TransmittersModel 268DD, 268HD, 268ND SS/268XD_3
31
™ Hastelloy C276 is a Cabot Corporation trademark
™ Hastelloy C2000 is an Haynes International trademark
™ Monel is an International Nickel Co. trademark
™ Viton is a Dupont de Nemour trademark
™ DC200 is a Dow Corning Corporation trademark
™ Galden is a Montefluos trademark
™ Halocarbon is a Halocarbon Products Co. trademark
™ AN140 is a Wacker-Chemie trademark
™ Neobee M20 is a Stepan Company trademark
™ Marcol is a Esso Italiana trademark
™ Syltherm is a Dow Chemical Company trademark
2600T Pressure TransmittersModel 268DD, 268HD, 268ND
ABB LtdHoward Road, St. NeotsCambridgeshire, PE19 8EUUKTel: +44(0)1480 475321Fax: +44(0)1480 217948
ABB Inc.125 E. County Line RoadWarminster, PA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183
ABB SACE spaBusiness Unit InstrumentationVia Statale 11322016 Lenno (CO) ItalyTel: +39 0344 58111Fax: +39 0344 56278
SS
/268
XD_3
ABB has Sales & Customer Supportexpertise in over 100 countries worldwide
www.abb.com/instrumentation
The Company’s policy is one of continuous productimprovement and the right is reserved to modify the
information contained herein without notice.
Printed in Italy (07.07)
© ABB 2007