sri venkateswara collge of engineering 2018-2019.doc · web viewpivot variable location-based...
TRANSCRIPT
SRI VENKATESWARA COLLGE OF ENGINEERINGDean (Research), Office of Dean (Research)
List of Publications for the Academic year 2018-2019
Department of Applied Chemistry
S.No.Name of the Faculty and coauthors
Title of the paperName of the Journal
Vol. No, pages and IF
1.
T.Kamatchi, S.Stanly and Sundaram G.B.
NiO/C3N4: hybrid photocatalyst for the enhanced photodegradation of organic pollutant under visible light
Materials Research Express, Vol.5, pp. 1-11, 2018.Impact Factor : 1.151
2.
Venkateswarlu M, Balusamy T, Murthy KSN, Jagadish M, and Vijayanand S
Effect of magnesium sulfate on the electrochemical behavior of lead electrodes for lead acid batteries
Electrochem. Energy Technol. Vol.4, pp55-59 2018
Department of Biotechnology
S.No Name of the Faculty(all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. Nakkeeran E, Sunita JV, Vindhya D and Kalaiselvi A
Synthesis, characterization and application of zinc oxide nanocomposite for dye removal from textile industrial wastewater
Indian Journal of Experimental Biology, Vol. 56, pp. 498-503, 2018. Impact Factor: 1.475
2. Rathna R and Nakkeeran E
Assessment of factors influencing the concentration of betacyanin from Opuntiaficus-indica using forward osmosis
Journal of Food Science and Technology, Vol. 55, pp. 2361-2369, 2018.
Impact Factor: 1.797
3. Rathna R, SunitaVarjani and Nakkeeran E
Recent developments and prospects of dioxins and furans remediation
Journal of Environmental Management, Vol. 223, pp.793-806, 2018.
Impact Factor: 4.005
4. Shankaranarayanan B and Purification of anthocyanins from red Separation Science and
Nakkeeran E cabbage using semi-interpenetrating network hydrogel beads in a packed bed column
Technology, 2018
Impact Factor: 1.2
5. Kalaiselvi A, Aswin JJG, Roopan MS, Madhumitha G and Nakkeeran E
Chemical composition of Clove bud oil and development of Clove bud oil loaded niosomes against three larvae species
International Biodeterioration& Biodegradation, Vol.137, pp. 102-108, 2018.
Impact Factor: 3.562
6. Praveen Kumar PK andProf.SivanandhamM
In vitro studies to determine the effect of Boeravinone B on Human dendritic cells
Pharmacognosy Magazine, Vol.14, No.56, pp.465-470, 2018.ISSN:0976-4062Impact Factor: 1.525
7. Lakshminarayanan CP, Prabhu S
Antidiabetic effect of polyphenols of Tamarind Seed Coat Extracts and its experimental analysis on streptozotocin induced Diabetic mice
Global Journal of Bioscience and BiotechnologyVol. 7 (4),pp.516-524, 2018. ISSN 2278-9103Impact Factor: 0.52
8. Nanditha R., YaminiSwetha N., Lakshminarayanan C. P and Prabhu S
In-vitro evaluation of anti-inflammatory and anti-urolithiatic activity of Cichoriumintybus leaves extract
Academia Journal of Medicinal PlantsVol 6(6): 115-121, 2018ISSN 2315-7720Impact Factor: 0.1
9. Ms. V.Sumitha and Prof. M Sivanandham
Effect of major and minor nutrients on lactic acidproduction using biodiesel waste-derived crudeglycerol as a carbon source by Lactobacillus caseiNCIM 2125
Energy Sources, Part A: Recovery, Utilization, andEnvironmental Effects, Vol 40 (11), pp 1-10, 2018.ISSN: 1556-7036Impact Factor: 0.56
10. SenthilNagappan. A Co-production of biodiesel and alpha linolenic acid (omega-3 fatty acid) from microalgae, Desmodesmus sp. MCC34
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Vol: 40, No.24, pp. 2933-2940, 2018, Impact Factor : 0.55
11. Nagappan, S., Kumar, R.R., Balaji, J.R., Singh, S., Verma, S.K
Direct saponification of wet microalgae by methanolic potassium hydroxide using acetone as co-solvent
Bioresource Technology reports (In press). Elsevier/Scopus indexed
12. K.A.YasarArafathD.NilavunesanS.Sivanesan
Effects of Retting Pond Wastewater Pollution and Seasonal Variation
Int. J. Environment and Sustainable Development,
P.Baskaralingam Vol. 17, Nos. 2/3, 2018
13. PandiPrabha S, Johanna Rajkumar, Suresh S, Karthikeyan S
Antiosteoporoticeffect of Hydrillaverticillata against lead induced damage in bone samples of edible fish Labeorohita – an FTIR approach
Materials Science and Engineering C, vol. 90, pp. 657-663, 2018. (ISSN 0928-4931)
Impact Factor: 5.02
Department of Automobile Engineering
S.No. Name of the Faculty Title of the paper Name of the JournalVol. No, pages and IF
1.
Tamiloli N and Dr.J.Venkatesan
Optimization of end milling process usingTaguchi based regression modeling
International Journal of Scientific Research and Review ISSN NO: 2279-543XVol.7, No. 2, 2018, pp.263 – 267 Impact Factor : 1.536
2.
Tamiloli N Dr J Venkatesan andSampath Kumar T
A comparative study on microhardness and wear ofUncoated and coated end milling inserts
International Journal of Mechanical and Production, Engineering Research and Development, ISSN(P): 2249-6890; ISSN(E): 2249-8001Vol. 8, No.8, pp.287-291, Aug.2018.Impact Factor : 7.6197
3
Thiruselvam K andDr.V.Ganesh
Performance and emission analysis of diesel engine using thermal barrier coating and addition of cerium oxide nanoparticles to palm biodiesel
Journal of Oil Palm ResearchISSN : 1511-2780 pp-1 to 8Impact factor : 0.427
4
Dr.S.PremnathRavindar Rao and Vishnu K
Engine modifications for single cylinder four stroke diesel engine using jatropha methyl esters
International Journal of Mechanical and Production Engineering Research and Development, ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, Special Issue 8, Aug 2018, 97-102Impact Factor : 7.6197
5.
A.BalasubramanianVenkatesan JSuresh SMariappan V
Experimental analysis of triple fluid vapour absorption refrigeration system driven by electrical energy and engine waste heat
Thermal Science
ISSN 2334-7163 (online edition)ISSN 0354-9836 (printed edition)pp- 110 to 118https://doi.org/10.2298/TSCI171129110AImpact factor : 0.678
6.
A.BalasubramanianVenkatesan JNagarajan G and Gowtham B
Investigation of energy availability for vapour absorption refrigeration system from engine exhaust
Int. J. Heavy Vehicle Systems, Vol. 25, Nos. 3/4, 2018Impact factor : 0.265
7. Ramanjaneyulu kolaGanesh VBoopalanSenthilraj A K
Simulation of load transfer effect during braking in a two wheeler for various load conditions
International Journal of Mechanical and Production Engineering Research and Development, ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, No.8, pp.97-102, Aug 2018, 97-102Impact Factor: 7.6197
Department of Applied Mathematics
S.No Name of the Faculty Title of the paper Name of the Journal and details
1.R.Muthucumaraswamy
and S. Velmurugan
MHD Flow Past a Parabolic Started Isothermal Vertical Plate with First Order Chemical Reaction
Journal of Applied Science and Computations, Vol 5, No.10, pp.1255-1265, 2018.Impact Factor : 5.8
2.. Vijayalakshmi AR, Kanimozhi B
Hall, Magneto Hydrodynamic andRadiation Effects on Rotating Fluid Past a Moving Vertical Platewith Mass Diffusion
Journal of Computational and TheoreticalNanoscience, Vol. 14 No.12, pp.5761-5769, 2017Impact Factor : 1.666
3. Vijayalakshmi AR, SelvaJayanthi M
Implicit Scheme Solutionof Unsteady MHD Flow
Appl. Math and Information Science, Vol.
12, No.2,pp.379-388, 2018Impact Factor : 1.232
4. Ravikumar J and Vijayalakshmi A.R.
Effects of radiationon MHD in a rotating fluid past a vertical plate with variabletemperature and mass
International Journal of Pure and AppliedMathematics, Vol.119, No.13, pp. 317-325, 2018
Impact factor : 7.19
5. MohanaMurali S., Vijayalakshmi A.R
Effect of ThermalRadiation on a Linearly Accelerated Vertical Plate with Variable MassDiffusion and Uniform Temperature Distribution in a Rotating Medium
International Journal of Computer Sciences and Engineering Vol. 6, No.12, pp.563-569, 2018.
Impact Factor : 6.0127
6. S. Prabhu, T. Flora and M. Arulperumjothi
On independent resolving numberofTiO2[m, n] nanotubes
Journal of Intelligent & Fuzzy Systems, Vol. 35 pp.6421–6425, 2018.Impact factor : 1.426
7. S. Prabhu, G. Murugan and K. S. Sudhakhar
On the New Topological Index of Certain Nanostructures using Combinatorial Computation
Journal of Computer and Mathematical Sciences, Vol.9, No.9, pp. 1257-1265, September 2018Impact factor : 4.655
8. S. Prabhu, Y. SherlinNisha, K.S. Sudhakhar
Detour Distance Sequence of Grid and Grid DerivedNetworks
International Journal of Advanced Research in Basic Engineering Sciences and Technology, Vol.4, No.9, pp.62-67, September 2018Impact Factor : 5.023
9.MichealArockiaraj, Jia-Bao Liu, S. PrabhuM. Arulperumjothi
On the Zagreb and Wiener polarity indices ofC3-free chemical nanostructures
UtilitasMathematica,
In Press 2018.
Impact factor : 0.273
10.N. Ramalingam, S. Karthikeyan, V. SwaminathanS. Prabhu
Star Domination and Star Irredundance inGraphs
Utilitas Mathematica,
In Press 2018.
Impact factor : 0.273
Department of Applied Physics
S. No.
Name of the Faculty (all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. Ramesh Babu ADr. A. BhaskaranSudharashanam MPrabhu A
Performance, combustion and emission characteristics of a single-cylinder constant speed compression ignition engine using soybean methyl esters
International Journal of Ambient Energy https://doi.org/10.1080/01430750.2018.1472659
2. Kurubaran A, Varun Krishna S, Vignesh K, Bhaskaran A.
Air Pollution Monitoring System using Android Application
International Journal of Current Research and Review, Vol 10, No.21, Nov 2018, pp 112-115
3. Sharan P, A. Bhaskaran, Kalpana S, Ramesh Babu A.
Effect of Dimethyl Carbonate on Performance and Emission
Characteristics of a Diesel Engine
International Journal of Current Research and Review, Vol 10, No.21, pp.116-121, Nov.2018.
4. Dr. A. BhaskaranR. Hariharasuthan
Adsorption Studies on Reactive Black 5 by Varying the
Composition of Sorel Cement
International Journal of Current Research and Review, Vol 10, No.21, pp.122-125, Nov.2018
5. Ruba Rani P Gangadharan
Dr. S.Sampathkrishnan
Quantum Chemical Calculation on 4-[2(tert-Butylamino)-(1 hydroxyethyl) ] Phenol buy Density functional Theory
Spectroscopy and Spectral analysis, Vol 38, pp.3681-3637, Nov. 2018
6.
Saranya CDr. S.Sampathkrishnan
Balamurugan N
Natural Bond orbital, Natural population analysis of atomic charges of 4 amino- 3 phenylbutanoic acid
Spectroscopy and Spectral analysis,Vol 39,pp. 3 March. 2019
7. C. Charanya,
S. Sampathkrisshnan,
A. Bhaskaran, N. Balamurugan
Molecular Docking, Quantum Chemical Analyses of Molecular Structureand Spectroscopic Investigations of N-[1-(1-Benzothien-2-yl)ethyl]-N-hydroxyurea: A Combined Experimental and Theoretical Studies
International Journal of Current Research and Review, Vol 10, No.21, pp.106-111, Nov.2018.
8.
Kumari MVL, Kaviarasi A, Dr. A. AnandavadivelPrabhakaran AR
Characteristics studies on thin films of epoxy resin in Organic solvent
International Journal of Chemical Sciences, Vol.16, No.4, pp.1-7, Dec 2018.
9. Kumari MVL, Kaviarasi A, Dr. A. AnandavadivelPrabhakaran AR
Thermal Mechanical and Dielectric studies on thin films of Ethylene vinyl acetate copolymer with varying concentration of Vinyal acetate
International Journal of Chemical Sciences, Vol.16, No.4, pp.1-6, Dec 2018.
10. Dr. K. Raju Investigation on Novel Nonlinear Optical L-threonine Calcium Chloride Single Crystal Grown by Solution Growth Technique
International Journal of Applied Engineering Research ISSN 0973-4562 Vol. 13, No.18, pp. 13454-13459, 2018.
11. Raajaraman B R Sheela N R.,Muthu S.
Investigation of 1-Acetyl-4-(4-hydroxyphenyl) piperazine an antifungal drug by spectroscopic quantum chemical computations and molecular docking studies
Journal of Molecular Structure, Vol.1173, pp.583-595, 2018.
12. Ms. G. Bharathy, Johanan Christian Prasana, S. Muthu
Molecular Conformational Analysis, Vibrational Spectra, NBO,HOMO–LUMO and Molecular docking of Modafinil Based on DensityFunctional Theory
International Journal of Current Research and Review, Vol 10, No.21,pp.36-45, Nov.2018.
13 Ms. S. Kalpana Effect of chromium doping on structural, optical and photocatalytic properties of ZnO nanoparticles
Opto Electronics and Advanced Materials-Rapid Communications,Vol.12, No.5-6, pp.353 – 359, 2018.
Department of Chemical Engineering
S.No. Name of the Faculty(all coauthors)
Title of the paper Name of the Journal
Vol. No, pages and IF
1N. ArunPremAnand, Ananya, R.Gokul, Abirami
Enhanced corrosion protection by recycled Polyurethane
Asian Journal of Applied Science and Technology, pp 1085-1088, 2018.
2
N. ArunPremAnand, S. Bhavatharini
PID Controller Tuning using ASPEN HYSYS
International Journal of Research in Engineering and Advanced Technology, pp 72-75, 2018
3N. ArunPremAnand, S. Bhavatharini
Comparative Study of PID Controller tuning methods using ASPEN HYSYS
International Journal of Scientific Research and Review, pp 542-547, 2018.
4
SwaminathanDetchanamurthy&SuganyaBaskaran
Studies on the influence of various metabolic uncouplers on the biodegradation rate of toluene in a biofilm bio-filter reactor
Iranian Journal of Chemistry and Chemical Engineering(Published Online)
Department of Computer Science and Engineering
S. No.
Name of the Faculty (all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. S. Jancy,
C. Jayakumar(Prof./CS)
Sequence Statistical Code Based Data Compression Model Using Genetic Algorithm for Wireless Sensor Networks
Journal of Engineering and Applied Sciences, Vol.14, No.3, pp. 831-836. 2019.
2. S. Jancy,
C. Jayakumar(Prof./CS)
Pivot variable location-based clustering algorithm for reducing dead nodes in wireless sensor networks
Neural Computing and Applications, Springer June 2018.
3. SL JanyShabu,
C. Jayakumar(Prof./CS)
Intelligent Optimization Techniques based Multimodal Image Fusion for Brain Tumor Detection
Research Journal of Pharmaceutical, Biological and Chemical Sciences, ISSN: 0975-8585, pp. 2149-2154, Jan 2019.
4. R. Sugumar,A. Rengarajan,
C. Jayakumar
Trust based authentication technique for cluster based vehicular ad hoc networks (VANET)
Journal of Wireless Networks, Springer Publications, Vol 24, No.2, pp. 373-382, Feb 2018. Impact Factor : 1.584
5. L. Sujihelen,
C. Jayakumar
Inclusive Elliptical Curve Cryptography (IECC) for Wireless Sensor Network Efficient Operations
Wireless PersCommun , Vol.99, pp. 893–914, 2018.
6. V. Murugesh, V. Sivakumar,
P. Janarthanan
An Ingenious Segmentation Application for brain Lesion Detection in Multimodal MR Images
JCSE International Journal of Computer Science and Engineering, E-ISSN: 2347-2693, Vol 6, No.6, June 2018
7. M. Adimoolam
M. Sugumara, R.S. Rajesh
Efficient encryption algorithm for video data storage
International Journal of Information and Computing Science, Vol 5, No.10, pp. 41-49, 2018.Impact Factor: 5.2
8. M. Adimoolam
M. Sugumara, R.S. Rajesh
Novel Efficient Redundancy Free Data Communication Model for Intelligent Surveillance System in WSN
Jour of Adv Research in Dynamical & Control Systems, Vol. 10, No.3,pp. 743-754, 2018.Impact Factor : 0.114
9. S.Supraja
S. Poorani
Tracking and predicting studentperformance in graduation programusing time series forecasting
International Journal ofAdvanced Research Trendsin Engineering andTechnology, Vol.5, No.11,April 2018.
10. Ms.J.M.Kavitha,
T. Rajasekaran
A study of Vehicular AD-HOCNetwork Simulators
Journal of AdvancedResearch in Dynamical & Control Systems, Vol.10, No.14, pp.1041-1048, 2018.SJR: 0.114
Department of Electrical and Electronics Engineering
S. No Name of the Faculty (all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. Sundararaman K, An Improved Single-Inductor Triple- Journal of Electrical
(Venkatesan C and Suganthi K)
Output Converter with Predictive Control
Engineering, Vol.18, No.3, pp.164-172, Impact Factor:0.504
2. C.Gopinath(M.Rajvikram)
A Pathway to Explore the Hidden Specialty in the Design of Fifteen Level Inverter in Grid Connected PV System
Computer Modeling in Engineering & Sciences,Vol.115, No.3,pp.359-386, 2018.Impact Factor:0.581
3. Kamal C(Thyagarajan T, Kalpana D and Pragadheeshwaran T)
Multiobjective design optimization and analysis of magnetic flux distribution for slotless permanent magnet brushless DC motor using evolutionary algorithms
Journal of Magnetism and Magnetic Materials,Vol.476, pp.524-537,2019Impact Factor: 3.046
4. M.Rajvikram Role of dual Input Fuzzy Controller for the better production of real power in wind system.
Journal of Electrical Engineering, Accepted for PublicationImpact Factor:0.504
5. M.Rajvikram(Saravanan.M)
Efficient Sliding Mode PI Controller for fault recovery in grid connected wind energy conversion system.
Journal of Electrical Engineering, Accepted for PublicationImpact Factor:0.504
6. Rajvikram.M(Leoponraj.S)
A method to attain power optimality and efficiency in solar panel
Elsevier,Journal of basic and applied sciences,Vol. 7, No.4, pp.705-708,2018
7. Rajvikram.M The Motivation for Renewable energy and its comparison with other energy sources: A Review
European Journal of Sustainable Development Research, Published on December 2018
8. Rajvikram.M Solutions for voltage sag in a doubly fed induction generator based wind turbine.
Journal of Central Power Research Institute(Best papers recommended by IIT),Accepted for Publication
9. Rajvikram.M(Gopinath.C,Leoponraj.S, Ram Kumar.S)
A novel methodology of IoT implementation in energy management
Journal of Central Power Research Institute(Best papers recommended by IIT),Accepted for
Publication10. T.Annamalai,
(Dr.K.Udhayakumar) A new multi-level inverter with reduced number ofswitches based on modified H-bridge
International national of power Electronics, Vol. 10, Nos. 1/2, 2019,PP. 49-64
11. T.Annamalai,(BalaSubramanian.S,Barath.M.S,Deepak Kumaar. M,DilliBabu.K)
Analysis of a Cascaded Modified DevelopedH-Bridge multilevel Inverter with an OptimumStructure
International Journal of Advanced Research in Electrical,Electronics and Instrumentation Engineering,Vol. 7, No.5, pp-2200-2208, May 2018.
12. T.Annamalai, (Dr.K.Udhayakumar)
An Enhanced H-Bridge Multilevel Inverter withReduced THD, Conduction, and Switching LossesUsing Sinusoidal Tracking Algorithm
Energiesdoi: 10.3390/en12010081
13. (KavaskarSekar )and http: //www.sciencedirect.com/science/article/pii/S1876610217323871 - !Nalin Kant Mohanty
Detection of High Impedance Fault in Distribution Networks
Elsevier, Ain Shams Engineering Journal-In press. Anna University annexure I and SCI indexed,Impact Factor:1.52.
14. (KavaskarSekar) andhttp://www.sciencedirect.com/science/article/pii/S1876610217323871 - ! Nalin Kant Mohanty
A fuzzy rule base approach for High Impedance Fault detection in distribution system using Morphology Gradient filter
Elsevier, Journal of King Saud University – Engineering Sciences-Inpress.SCI indexed, Impact Factor:2
15. ( KavaskarSekar) and http://www.sciencedire ct.com/science/article/pii/S1876610217323871 - !Nalin Kant Mohanty
Data mining-based high impedance fault detection using mathematical morphology”
Elsevier, Computers and Electrical Engineering Vol 69 ,pp 129–141,2018.Impact Factor: 1.57.
16. ( SaraswatiBehera) and Nalinkant Mohanty
Social welfare maximization with thyristor-controlled series compensator using grey wolf optimization algorithm
International Journal of Electrical Engineering Education ,pp.1–14, DOI: 10.1177/0020720918822754, SCI indexedImpact Factor: 0.504
17. ( SaraswatiBehera) and Congestion management, using thyristor International Journal of
Nalinkant Mohanty controlled series compensator employing Improved Grey Wolf Optimization technique
Electrical Engineering Education, pp.1–21, DOI: 10.1177/0020720918822730, SCI indexed,Impact Factor: 0.504
18 Dr.KR.Santha, (Deepak Arumugam and PremalathaLogamani)
Electromagnetic and Thermal analysis of synchronous generator with different rotor structures for aircraft application
Alexandria Engineering Journal, Vol.57 , pp.1447 1457Elsevier Journal
19 Dr.KR.Santha and (Ganapathy Ram)-
Extended Non-Singular Terminal Sliding Mode Observer for Sensorless Control of Surface Mount Permanent Magnet Synchronous Motor
Journal of Electrical Engineering, (2018) Vol. 18 , Ed.2, 2018.Impact Factor:0.504
20 Dr.KR.Santha and (Ganapathy Ram)-
Design of an Adaptive Gain Variation sliding Mode Control Algorithm for Extended Non-Singular Terminal Sliding Mode Observer based Sensorless PMSM Drive
International Journal of Applied Engineering Research, Vol 14, No.1, pp. 62-68, 2019.
21 Dr.KR.Santha and (Ganapathy Ram)-
Review of sliding Mode Observers for sensorless control of Permanent Magnet Synchronous Motor Drives
International Journal of Power Electronics and Drive System, Vol.9,No.1 pp.46-54, March 2018 ,
Department of Electronics and Communication Engineering
S.No. Name of the Faculty(all coauthors)
Title of the paper Name of the Journal
Vol. No, pages and IF
1 Dr.S. Muthu Kumar IoT Based Remote Plethysmographic International journal of
and S. Lavanya, G.K. MuthuReshmaa, B. Nandha Kumar
imaging with thermal reading Advanced Research Trends in Engineering and Technology.Vol.5, No.11, pp.55-59, April 2018.Impact factor:4.753
2 Dr.S. Muthu Kumar, andP.Subha
Human Gesture Recognition For IoT Based Applications.
International journal of Advanced Research Trends in Engineering and Technology.Vol.5,No.11, pp.88-92, April 2018.Impact factor:4.753
3 Dr.S. Muthu Kumar, Vallimayil.SR, Sanjay.P, Sneha.R
Intelligent Debris Management System. International journal of Advanced Research Trends in Engineering and Technology.Vol.5, pp.97-102, April 2018.Impact factor:4.753
4 Dr.G.A.Sathishkumar,J.JencyRubia
A high speed fixed width floating point multiplier using residue logarithmic number system algorithm.
International journal of Electrical Engineering Education, pp.1-15Impact factor:0.593
5 Dr.UmmaHabiba.H,Banupriya.A
Design and analysis of full mode SIW bandpass filter for 5g applications
International Journal of Creative Research Thoughts,Vol.6, Iss.2,pp. 560-563, . April 2018.Impact factor:5.97
6. Dr.UmmaHabiba.H,Banupriya.A
Ka-band compact and high performance SIW bandpass filter based on Defected Ground Structure
Journal of Emerging Technologies and Innovative Research, Vol.5, No.9,pp.88-91,September 2018.
7. Dr.UmmaHabiba.H,Banupriya.A
Design of SIW bandpass filter using DGS-DMS technique for 5G applications
Journal of Analog and Digital communications, Vol.4, No.3, pp.1-6, 2018.
8. Dr.UmmaHabiba.H,Banupriya.A
A Novel Dual-band SIW Bandpass filter for Ku-band applications
International Journal of Research and Analytical Reviews,Vol.5,Iss.4, pp. 373-377, October 2018Impact factor:4.236
9. Dr.UmmaHabiba.H,Banupriya.A
Design and analysis of compact SIW Bandpass filter using DGS-DMS technique for satellite applications
Journal of Analog and Digital communications, Vol.3, Iss.3, pp.7-13, 2018
10. Dr.UmmaHabiba.H,S.Revathy, G.Ponmalar
Compact UWB rectenna based RF energy harvesterfor future IOT
International Journal of Creative Research
Thoughts,Vol.6, No.2,pp.560-563, ISSN: 2320-2882, April 2018.Impact factor:5.97
11. Dr.UmmaHabiba.H, R.Sandhya
Miniaturised ISM band HMSIW band-pass filter loaded with wide U slot
The Journal of Engineering, Vol.2, No.2, pp. 88–93, 2018Impact factor:1.07
12. Dr.UmmaHabiba.H, R.Sandhya
Compact Halfmode SIW Bandpass Filter For Super Wideband Application,
International Journal of Advanced Research in Computer Science, Vol.9, No. 3, June 2018.Impact factor:3.727
13. Dr.H.UmmaHabibaHarish kumaran.D, Aswanth.R, AbinashS,R.Sandhya
Novel Compact Bandpass Filter For UWB Application
International Journal of Research and Analytical Reviews,Vol.5,No.3, E-ISSN 2348-1269, P- ISSN 2349-5138 August 2018.Impact factor:4.236
14. Dr.H.UmmaHabiba and .Sandhya R
Design Of K-Band Full Mode SIW Bandpass Filter For Satellite Applications
International Journal of Research and Analytical Reviews, Vol.5,No.4, E-ISSN 2348-1269, P- ISSN 2349-5138 October 2018.Impact factor:4.236
15. Dr.H.UmmaHabiba andViwinsingh Y
Simple and High Directive Microstrip Single Terminal Antenna for Higher Band 5G Application
International Journal of Research and Analytical Reviews,Vol.5,No.4, E-ISSN 2348-1269, P- ISSN 2349-5138November 2018.Impact factor:4.236
16. Dr.H.UmmaHabiba andJ.Parimala
Novel Approach To Design A Compact Quad-Band Band Pass Filter By Analyzing Various Resonators
International Journal of Research and Analytical Reviews, Vol.5, No.4, E-ISSN 2348-1269, P- ISSN 2349-5138November 2018.Impact factor:4.236
17. Dr.H.UmmaHabibaand Mohamed Ibrahim K
Design And Analysis Of Coplanar Waveguide Resonators Using Short Ended And Open Ended Series Stub
IJRAR- International Journal Of Research And Analytical Reviews,
[ Vol.5 I Issue 3 I July– Sept 2018] E IISSN 2348 –1269, Print ISSN 2349-5138Impact factor:4.236
18. Dr.H.UmmaHabibaandMohamed Ibrahim K
Utilization of Electromagnetic Band Gap Cells for Performance Improvement of Co-Planar Waveguide Ultra Wide Band Filters
Journal of Radio and Television Broadcast, Vol,3 Issue 2, MAT Journals 2018.
19. P.Epsiba, N.KumaratharanG.Suresh
A novel discrete CURVELET transform and modified WHOG for video surveillance services
Concurrency and Computation: Practice and Experience, Special issue DOI: 10.1002/cpe.5046, pp.1-6, Impact Factor: 1.114
20. S.Vijayalakshmi, Dr.P.Jothilakshmi
Design And Implementation of Wideband Antenna Using Semi Elliptical Ground Plane For Ultra Wideband Application
International Journal of Pure and Applied Mathematics, Volume 117, No. 16, 2017, pp.417-425, ISSN: 1311-8080 (Print) ISSN: 1314-3395 (on-line)Impact factor : 0.25
21. S.Vijayalakshmi, Dr.P.Jothilakshmi
Design and Implementation of Wideband Antenna Using Defected Ground Structure (DGS) for Ultra-wide band Application.
International Journal of Innovative Research in Computer and Communication Engineering Vol. 5, Special Issue 3, April 2017, pp.178-183, ISSN(Online): 2320-9801ISSN (Print): 2320-9798
22. K.Jothilakshmi, Dr.P.Jothilakshmi
Design of Multilayer MicrostripPatchAntenna for Satellite Application.
International Journal of Innovative Research in Computer and Communication EngineeringVol. 5, Special Issue 3, April 2017, pp.178-183,ISSN(Online): 2320-9801ISSN (Print): 2320-9798
23. K.Jothilakshmi, Dr.P.Jothilakshmi
Design of Multilayer Microstrip Patch Antenna for WiMax Application
International Journal of Engineering Science and Technology (IJEST), Vol. 9 No.09S Sep 2017, pp.125-130, ISSN : 0975-5462.
24. D.Vidhya, Dr.P.Jothilakshmi
Design and Implementation of a Wideband Frequency Reconfigurable Antenna for Satellite Application
International Journal of Innovation in Engineering Research & Management, ISSN:2348-4918 UGC Approved Journals No.48708 Vol.5, No.2, pp.1-5,April 2018
25. D.Vidhya, Dr.P.Jothilakshmi
Design and Comparison of Slotted Patch Antenna with EBG Structure
International Journal of Science and Innovative Engineering & Technology, May 2018, Volume 3, ISBN No. 978-81-923607-3-7
26. Dr.R.Gayathri,M.Kavitha
Implications of Remote Sensing Data Analysis Using Deep Learning Techniques.
Journal of Computational and Theoretical Nanoscience Vol. 15, pp.2857–2862, 2018
27. Dr.R.Gayathri,BabithaLincy R
A Survey on Handwritten CharacterRecognition Techniques for Tamil Language
International Journal of Engineering & TechnologyVol:7, pp. 975-979
28. Ms.R.Kousalya, G.Pavithra
Design and Verification of High Performance VLSI Architecture for Reconfigurable FIR Filter Using Pipelined Distributed Arithmetic
International Journal of Pure and Applied Mathematics Vol.119 ,pp.1101-1107
29. Ms.M.Anushya,IndhujaVinayagam
Automatic Vision system Of a Bead checker Machine Implemented using PLC
International journal of Advanced Research Trends in Engineering and Technology.Vol.5, No.11 2018, pp.83-87, April 2018. Impact factor:4.753
30. Mr.M.H.Masood, Compact bandpass filter with reconfigurable X-band using stepped impedance resonator and folded structure
The journal of Engineering, Vol.8,No.3,pp162-165,2018.doi:10.1049/joe.2017.0796 .Impact factor:0.33
31. Ms.S.M.Mehzabeen,M.Mithun,M.Farhan,M.Rayyan Hussain
Implementation of Intelligent Traffic Light Scheduling Algorithm through Object detection.
International journal of Advanced Research Trends in Engineering and Technology, Vol.5, No.11,pp.37-43, April 2018. Impact factor:4.753
Department of Information Technology
S.No. Name Of The Faculty(All Coauthors)
Title Of The Paper Name Of The JournalVol. No, Pages And If
1. Dr.V.Vidhya Iot Based Drowsyness Detection System In Automobiles
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.246-253. IF :5.75
2. K.Nivethaashree,HarikambaYandamuri
Predicting The Pregnancy Outcome In Sle Affected Women Using Recurrent Neural Network
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.128-132, IF:5.75
3. K.Kiruthika Devi,B.Nithya,S.Yeswanth
Twitter Sentiment Analysis Usingword2vec And Tf-Idf Word Embedding
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.120-122, IF:5.75
4. G. Sangeetha,Ajay Kaarthic.J
A Survey On Cross Vm Side Channel Attack In Cloud Computing
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp. 123-127, IF:5.75
5. Kirubawesley,Yaaminee.M,Sivasri.P,Poornima.R
A Novel Technique For Fingure-Vein Feature Extraction And Authentication
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.77-81, IF:5.75
6. SharonRanjithaEsther.J,M.riammal.C,Yuvapriya.S
Decreasing Inter-Channel Interference For Zigbee Networks In 5g Environment
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.46-53. IF:5.75
7. SharonRanjithaEsther.J,Nandhini.R,Lourthushipa,Nandhini.R
Smart Surveillance International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.56-59, IF:5.75
8. SharonRanjithaEstherJJenifer.R,Kanimozhi.E,Monisha.P.S
Online Travel Pass System International Journal of Research And Analytical Reviews, Vol.5, No.3, pp 235-240, IF:5.75
9. Kala.A,Sharmila.P,Suganya.B
Prediction Of Precipitation Using Machine Learning Algorithms
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.22-26, IF:5.75
10. Kala.A,M.J.Sreenidhi,M.SubramanyaSujith,S.Surabi Sri Dhanya
Emotion Recognition Bot International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.27-33, IF:5.75
11. P.SharonFemi,S.AnadhKishan,J.Clinton David
Handwritten Character Recognition Using Cnn
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp. 241-245, IF:5.75
12. P.SharonFemi,A.Annapoorani,NeroshaSenthilKumar
Face Recognition Attendance System International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.13-15, IF : 5.75
13. V.M.Sivagami,SahanaNagarajan,TandraSupraja
Automating Societal Requirements Using Iot
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp. 100-106, IF:5.75
14. V.M.Sivagami,K.S.Easwarakumar
Interhost Communication Scheduling During Live Migration Of Virtual Machines In Cloud Computing
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.107-114, IF:5.75
15. V.M.Sivagami,M.Premkumar,M.Vishnukumar
Identifying The Best Virtual Machine For Virtual Machine Migration Using Particle Swarm Optimization
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.89-95 ,IF:5.75
16. V.M.Sivagami,K.S.Easwarakumar
Performance Analysis Of Load Balancing Algorithms Using Lbaas
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp. 140-150, IF:5.75
17. V.M.Sivagami,SahanaNagarajan,TandraSupraja
Societal Applications of IOT International Journal of Latest Trends In Engineering And
Technology, pp.118-124, 2018, IF:0.685
18. V.M.Sivagami,S.S.Sarumathi
Survey On Different Machine Learning Algorithms
International Journal of Latest Trends In Engineering And Technology , pp.16-23, 2018. IF:0.685
19. V.M.Megala,Padma Sneha,Prathyusha Reddy.
Artificial Intelligence For Vision Impaired People
International Journal of Latest Trends In Engineering And Technology, Special Issue,April-2018,pp.31-36.
IF :0.685
20. V.M.Megala,AakashRaj.G.K,Gowtham.K,Ishwaryan.K
Parking Fee Automation International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.151-156, IF:5.75
21. V.Ranjith,V.Rajaram
Mining User's Interest By Mining Interpersonal Interest Similarity And Polarity Identification
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.115-119, IF:5.75
22. S.UvarajArutkumaran
Network Based Cryptographic Techniques
International Journal of Research And Analytical Reviews, Vol.5, No.3, pp.96-99, IF:5.75
23. V.M.Sivagami,M.Premkumar,M.Vishnukumar
Virtual Machine Migration Using Particle Swarm Optimization Algorithm In Mobile Cloud Computing
International Journal of Research, Vol.5, No.10, pp.70-76. 2348-795x, IF:3.541
24. Dr.C.Yaashuwanth,B.Jegajothi
Embedded Controller Based Maximum Power Point Tracking For Photovoltaic System Using Adaptive Technique
Journal of Electrical Engineering(In Press)
25. Dr.C.Yaashuwanth,S.Ramesh
Qos And Qoe Enhanced Resource Allocation For Wireless Video Sensor
International Journal of Parallel Programming (In
Networks Using Hybrid Optimization Algorithm
Press)
26. Dr.C.Yaashuwanth,A.RajaBasha
Optimal Partial Aggregation Based Energy Delay Compromise Technique For Wireless Sensor Network
Iete Journal of Research (Yet To Be Published )
27. K.Suresh Automatic Railway Gate Level Control System
International Journal of Innovative Research Explorer,Volume5,Issue 5,May-2018, IF:5.2
Department of Mechanical Engineering
S. No.
Name of the Faculty (all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. N.Muthukrishnan
M. Nareshbabu
Experimental analysis in drilling of AA 5052 using copper nanofluids under minimum quantity lubrication
Australian journal of Mechanical Engineering
DOI: 10.1080/14484846.2018.1455267
2. N.Muthukrishnan
M. Nareshbabu
V.Anandan
M.Gajendran
Experimental process to evaluate the minimum quantity lubrication technique using copper nanofluids in turning process
International journal of Machining and machinability of materials
Vol:20, No:6, 2018
3. N.Muthukrishnan
S.Muniraj
Modelling and analysis of energy conservation in turning of lead free micro alloyed steel using D-optimal design
International journal- Progress in Industrial Ecology
Vol:11, No:3, 2017
4. N.Muthukrishnan
M. Nareshbabu
Santhanakumarmuthuvel
Copper nano fluids under minimum quantity lubrication during drilling of AISI 4140 STEEL
Australian journal of Mechanical Engineering
DOI: 10.1080/14484846.2018.1486694
5. N.Muthukrishnan
M. Nareshbabu
Experimental investigation of copper nanofluid based minimum quantity
Journal of the Brazilian society of Mechanical
Santhanakumar
K.Ganesan
lubrication in turning of H 11 steel sciences and Engineering
DOI: 10.1007/s40430-018-1093-9
Impact factor – 1.627
6. Gopinath S, Balan SK, Ramanathan, M &Narashiman K,
Measure of Utilisation of Government Schemes & Support by Small and Medium Enterprises (SME): Service Providers Perspective’
Applied Mechanics and Materials, vol. 867, pp. 283-289,2017 ISSN:1662- 7482, SJR Index:0.11,
7. Gopinath, S, Vikram, H ,Vaidya, GR &Narashiman, K
Human Resource Risk Management in Small and Medium Enterprises
World Applied Sciences Journal,vol.35,no.5,pp 718-722, 2017,
8. Gopinath, S, Sanjay Ram, S &Narashiman,
An Empirical Study of Operations Risk Management in Small and Medium Enterprises in India
Middle-East Journal of Scientific Research, vol. 25, no.5, pp. 960-965, 2017,.ISSN 1990-9233, SJR Index: 0.160
9. Gopinath, S, Sundaram, AVR, Sheshathri, R &Narashiman, K.
Framework of Conceptual Model for Quality Management in Small
and Medium Enterprises (SME)’,
International Journal of Enterprise Network Management, vol.9,no.2,pp 143-155, ISSN:17481260,
SJR Index:0.118
10 Nishal M, Ramprasad K, Arun Theja A J, Ajayy S , Saravanan S and Abhishek S
Need for total EED for total productive maintenance in SME AND Barriers in implementing TPM in SME
International Journal of Mechanical and Production Engineering, ISSN(p): 2320-2092, ISSN(e): 2321-2071
11 Nishal M
Ramprasad K
Arunram S P
Adithya M
Improving efficiency of
Wheel cylinder assembly
unit Value stream
Mapping (VSM)- A Case
Study
International Journal of Mechanical and Production
Engineering Research and Development (IJMPERD)
ISSN (P): 2249-6890; ISSN (E): 2249-8001
Vol. 8, No.8, pp.45-51, 2018.
12 Gurusamy V Optimization of LASER Texturing Process Parameters to Maximize the ultimate tensile
Journal of the Balkan Tribological Association Vol.
Pitchandi K,
Muthukrishnan N
strength of LASER Textured AZ31B Magnesium Alloy made by cold metal transfer welding using response surface Methodology
25, No 1, pp.83–98 , 2019
13 Govindaraj K and
Prem Ananth M
Effect of Dimple Geometry and Wear Performance of DLC Coating on uni-directional sliding contact conditions
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No.8, Aug 2018, pp.420-4252.
14 Senthil Kumar A, Sathya Sai
Prasath. R. N, Sandeep Raghavan T,
M. Prem Ananath
Tribological Analysis of Coated Aluminum Alloy Substrate with surface Texturing
International Journal of Mechanical and Production Engineering Research and Development ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No.8, Aug 2018, pp.120-127
15 Ponnuvel S and
Prem Anaanth M
Effect of specific surface area of MWCNTS on surface roughness and delamination in drilling Epoxy/Glass Fabric Composite
Materials Research Express
5 (2018) 035310 https://doi.org/10.1088/2053-1591/aab647 II
Rs.2000/-
Impact Factor :1.151
16 Ponnuval , S and Senthilkumar N
A study on machinability evaluation of Al-Gr-B4C MMC using response surface methodology-based desirability analysis and artificial neural network technique
International Journal of Rapid Manufacturing, Vol. 8, Nos. 1/2, 2019
DOI: 10.1504/IJRAPIDM.2019.097030
17 S.Saravanan
B. Rajesh Kumar
1-Hexanol as a sustainable biofuel in DI diesel engines and its effect
on combustion and emissions under the influence of injection timing
Applied Thermal Engineering 113 :pp.1505–1513
Impact factor :3.771
Melvin Victor De Poures, Sathiyagnanam A P and Rana D
and exhaust gas recirculation (EGR)
18 S.Saravanan S
Rajesh Kumar B
Damodharan D, Sathiyagnanam A P , Rana D
Sethuramasamyraj B
Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions
Energy Conversion and Management 166:pp.81–97Impact Factor: 5.589
19 Saravanan S
Rajesh Kumar B
Dhanasekaran, R and Ganesan S
Utilization of waste cooking oil in a light-duty DI diesel engine for cleaner emissions using bio-derived propanol
Fuel 235: pp.832–837Impact Factor :4.601
20 Saravanan S
Nandakumar, H
Simulation Of Various Engine Parameters Of PPCI Engine For Nox Control
IJCRT, 6(2)
21 Saravanan S
Kaliyanasunder R,
SujaiPandian S P
Experimental Investigatonson Of PPCI Engine Fuelled With
Diesel And Butanol Blends
International Journal of Mechanical and Production
Engineering Research andDevelopment Vol. 8,(8):pp.33-37
22 Saravanan S
Rajesh Kumar B
Melvin Victor De Poures, Sathiyagnanam A.P., RanaDipak
Balaji Sethuramasamyraja
Damodharan D
Using renewable n-octanol in a non-road diesel engine with some modifications
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
41:pp.1194–1208
Impact factor :0.555
23 A.Rajaram,VSubash, K.Surendar, P Raghu
Optimization of spray characteristics by response surface methodology,
24 P.Raghu, A.J ArunTheja, Study of Spray Breakup Regimes of International Journal of
G. Ashwin Raj, T.G AdithyaArvind
Preheated Biodiesel Fuel Engineering Research in Mechanical and Civil Engineering (IJERMCE)Vol 3, Issue 2,pp.150-154,
Impact Factor 3.8
25 M.Dyanesh, NishanthPaul.V, GirishEthiraj, P Raghu
Numerical Simulation for Spray Characteristics of Diesel and Biodiesel fuel
International Research Journal of Engineering and Technology Volume: 05 Issue: 03, pp.2812-2815, Impact Factor 6.171
26 P. Vengatesh, P. Raghu, N. Nallusamy,
Spray Characteristics of Diesel Fuel Using Numerical Simulation,
International Research Journal of Engineering and Technology, Vol.5, No.4, pp.2812-2815.
27 N.SankaraManikandan, P V Lakshman, Ramesh Rajesh,andP Raghu
Optimization Of Fuel In Diesel Engines, International Journal Of Science And Innovative Engineering &Technology, Vol.1, May 2018.
28 Raghu P,
Sundarrajan R, Rajaaraman R
M. Ramaswamy M and
Sathyanarayanan S
Heat Transfer investigation on a single Cylinder Diesel Engine using Diesel and Biodiesel
International Journal of Mechanical and Production Engineering Research and Development
ISSN (P): 2249-6890;
ISSN (E): 2249-8001 Vol. 8,No. 8, pp.120-127, Aug 2018.
29 Antony V,
Immanuel Akash, Ganesh raj M,Kumaresh V,
Bharath Kumar S and Raghu P
The Design and Fabrication of Crushing Machine using Double Toggle Mechanism
International Journal of Industrial Engineering and Technology
ISSN (P): 2277-4769
ISSN (E): 2278-9456
Vol. 8, No.2,pp.7-12, Dec 2018.
30 Arumugam S, ArunTheja A J , Dyanesh MAbishek S and
Nisanth Paul V
Optimization of spray characteristics using multi Response signal to noise ratio in high pressureChamber
International Journal of Mechanical and Production Engineering,
ISSN 2321-2071, Vol.6, No.7, pp 45-50, July 2018.
31 S.Arumugam, K.PitchandiT.N.S.Varadhachari
Spray analysis in a high pressure chamber with diesel and biodiesel
Asian Journal of Science and Technology, ISSN 0976-3376, Vol.9, No.9 pp: 8676-8679, Sep 2018.
32 C.Senthamaraikannan and Dr.R.Ramesh
Evaluation of mechanical and vibration behavior of hybrid epoxy carbon composite beam carrying micron-sized CTBN rubber and nanosilica particles
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
https://journals.sagepub.com/doi/abs/10.1177/1464420718784315.
Impact Factor : 1.28
33 R.Kumutha
S.Ilaiyavel
Study of Tribological behavior of conversion coated high Carbonhigh Chromium Steel
International Journal of Mechanical and ProductionEngineering Research and Development
Vol. 8,No.8,pp.214-220, Aug 2018.
Impact Factor : 1.28
34 S Arumugavel
S IlaiyavelStudy of erosion and corrosion behavior of Alumina and Zirconium coating on Stainless Steel
International Journal of Mechanical and Production-Engineering Research and Development
Vol. 8, No.8, pp.214-
220,2018
35 Karthee. K, chathur vel. R &yeshwant raj. S Identifying opportunity for improvement for
industries using multi-criteria decision making (mcdm) through internet of things (iot),
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018
36 Karthee. K, vishalsankar. S &yeshwant raj. S A review on rapid prototyping (rpt): recent
trends, future & influence of internet of things (iot)/ cloud manufacturing (cm)
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018
37 Yeshwant raj. S, karthee. K, arvind. D &ashwin. R Increasing the efficiency of regenerative air
preheater (raph) through leakage reduction by retrofitting the radial and axial seals
International journal of mechanical and production engineering research and development transstellar, Vol.8, No.8, pp.128-132, 2018
38 Karthee k, Vishal Sankaryeshwant raj. S. Improvement of overall performance of
Micro/Small Industries (MSSI) using Multi-Criteria decision making (MCDM)
IOPCON.SER Mat.Sci.Engg..402 012119
pp.1-11, 2018.
39 Anish A andAnanth Kumar M Characterization of aluminium matrix
reinforced with tungsten carbide and molybdenum disulphide hybrid composite
IOP Conf. Series: Materials Science and Engineering 402 (2018) 012006
doi:10.1088/1757-899X/402/1/012006
40 S.Natarajan,V.J.Samnivethan, and Pitchandi K
Optimization of Parameters on Direct Injection Compression Ignition Engine fuelled with Acacia Nilotica Biodiesel blends
International Journal of Mechanical and Production Engineering Research and Development
Vol.8,No.8, pp.77-85, Aug. 2018.
41 S.Natarajan , Arunram S P, Samnivethan V J and
Impact of Acacia nilotica on Performance Combustion And Emission Characteristics
International Journal of Mechanical and Production
Pitchandi K. in Compression Ignition Engine Engineering Research and Development
Vol. 8, No.8, ,pp.38-44 , 2018.
42 Alfred V , Franklin M. ChenthilJegan G B , . Bhaskar
Mohandass M and
Vasudevan N
Fracture Strength evaluation of composite lamination using modified WEK Model
International Journal of Mechanical and Production Engineering Research and Development
ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, No. 8, pp.345-351, Aug 2018,
43 ThirumalaiKannan K and Ramesh Babu S Tribological properties of modified jojoba
oil as probable base stoke ofengine lubricant
Journal of Mechanical Science and Technology, Vol.32, No.4 pp.1739-1747 , 2018.
Impact Factor 0.5544 Ramesh Babu S, Deepak
Kumar J K
Kavin Kumar K N and Badrinarayanan R
Mechanical Characterization of cold metal transfer Butt Welded AA 6061-T6 Aluminum Alloy
International Journal of Mechanical and ProductionEngineering Research and Development ISSN(P): 2249-6890;
ISSN(E): 2249-8001Vol. 8, No.8, pp.144-154, Aug 2018.
45 Thirumalai K
Kannan S and Ramesh Babu S
Effect of Nano particles in modified vegetable oil using response surface methodology
International Journal of Mechanical and Production Engineering Research and Development
Vol. 8, No.9, pp.439-444, Dec 2018.
46 Gopinath S, Ramanathan M ArunSankar N and
Narasimhan K
Supply Chain issues in Medium scale Auto component manufacturers: Case Study Approach
Middle East Journal of Scientific Research, Vol.24, pp. 245-249, 2016.
Department of Marine Engineering
S.No.Name of the Faculty and coauthors
Title of the paperName of the Journal
Vol. No, pages and IF
1.
KarnamDileep. Evaluation of Cutting forces and temperature during turning of AISI 4140 steel using MQL with CNT Nanofluid
International Journal of Mechanical and Production Engg. Res. And Development, Vol.8, No.8, pp. 238-243, 2018.Impact Factor : 1.151
Department of Humanities and Social Sciences
S. No.
Name of the Faculty (all coauthors)
Title of the paper Name of the JournalVol. No, pages and IF
1. Clement A andMurugavel T
English for the Workplace: The Importance of English Language skills for Effective Performance
The English Classroom, Vol.20, No.1, pp.41-50, 2018