sr series product introduction · screen. high brightness does not mean a huge increase of energy...
TRANSCRIPT
SR Series Product Introduction
Engineering Department
Content
01
• Market background & positioning
Background
02
• Product highlight point & unique selling proposition
USP
03
• Product characteristic introduction
Characteristic
04
• Product specification sheet
Specification
Application Scenario - Outdoor Advertising
Product USP02
Product USP
USP
12000 level brightness
Ten years focus on one kind of
diode keep the stability of LED
Independent LED sealing
Monitoring the status of screen and working
information of modules
Intelligent monitor & module
High light, low energy consumption,
reducing operation cost
Energy saving
Front and rear service available, fast and
convenient.
Front & rear service
Completely sealed module, front
and rear protection rating IP65
Independent waterproof module
SMD product 10000nit,DIP product 12000nit
Product USP
Brightness up to 12000nit
◆ Use independent sealed LED to increase
the brightness from thousands to 10000
bits level, which gives you a “shining”
screen.
◆ High brightness does not mean a huge
increase of energy consumption, because
of the technology breakthrough of
independent LED sealing.
◆ 10000 level high brightness. SMD product
has a brightness of 10000nit, while DIP
has a brightness of 12000 nits
◆ High brightness create a bright-color view,
which attract more audience and create
more business value.
Product USP
BrightnessComparison
LED Type Pixel Pitch Absen U company L company S company
DIP
P10 12000 10000 7000 8000
P16 12000 10000 8000 8000
SMD
P10 10000 10000(USFIII)
6000 6000
P6 10000 7000 6500 7000
High brightness means our screen has enough margin. Its brightness
can be manually increased year by year, thus keeping the display gorgeous!
Excellent!
Product USP
Independent LED sealing
Ten years focusing:Professional brings up high quality
• Top level sealing technology,
ensuring the stability of LED.
• Advanced manufacturing and
standard product, ensuring the
stability of mass production
• Strict outdoor testing condition,
ensuring the stability of product
quality.
Product USP
Red light curve Green light curve Blue light curve
High Temp. Life Test (65℃ @20mA)
Independent sealing quality
1000 hours light damping test, no significant difference comparing to famous global brand.
Product USP
• No additional monitoring card and cable required. A simple
system means less failure;
• Real-time monitoring of sending card, receiving card,
temperature, voltage and module status;
SendingCard
ReceivingCard
Temperature
Voltage
ModuleStatus
Hardware status monitoring
• Automatically email the user when failure occurs, which
could greatly increase the response time and decrease
the cost of troubleshooting;
• Support connection with PC, laptop or smart phone to
enable user to monitor the screen remotely;
Product USP
Intelligent module
SR series is an “alive” product. Every module has its identification information, makes it easy to view and track its status.
Module ID Order Number Producing Date Working Hours
Module Current Color coordinate Module Voltage Module Temperature
Product USP
⚫ Completely glue potting, independent water proof;
⚫ Rear/Front IP67/IP65 rating;
⚫ Industry level waterproof cable and plug;
⚫ High level protection, insurance of stable quality;
Independent waterproof module
Waterproof is a main concern for outdoor fixed product. But our SR
module has the protection rate of IP67, both front and rear, which
will protect the module from vapor and water spray!
Product USP
• Independent waterproof module;
• Front and rear glue potting;• IP65 Industry level
waterproof cable and plug
Module waterproof comparison
• Waterproof module• Water leakage at the
position of cable connection
• Waterproof module• Waterproof design is
too simple, which only depends on 2 buckles and a thin rubber gasket
• Not waterproof module• Depends on the rubber gasket.• PCB board can be directly seen,
which means it is likely to affected by vapor and dust.
Absen U**lumen L**tronics S**si
Product USP
• Comparing to earlier Absen product, SR
series increases the brightness of red diode
by 125% while adding no extra energy
consumption;
• Natural convention design without the
power taken by the fans. Average power
consumption is as low as 108W/m2, 50%
lower than original product.
Energy saving HIGH BRIGHTNESS, but ENERGY EFFICIENT: mostly valuable for customers!
Product USP
Power consumption comparison
Absen U company L company S company
P16(W/㎡) 364 470 660 430
The bigger your screen is, the more cost SR saves for you!
Product USP
Fast maintenance: faster, and not only “a little bit”!
Module with knobs, 4 seconds to fasten and loose.
2 in 1 aviation plug, rotate & lock8 buckles on the power supply cover, 8 seconds to open
Product USP
Front & rear serviceable
All SR products are front and rear serviceable, thus meeting the requirement of different application.
Rear service uses knob to unlock the module. It is Fast(lock within only 10 seconds) and EASY(no additional tools required).
Front Service Rear Service
1、Insert the Allen wrench in the knob holes
and rotate. The knob in the back will be
unlocked at the same time
2、Take out the module
1、Rotate to unlock the knob 2、Rotate the module and take it out
Product USP
• Fast install & uninstall with knob;• Power & Data 2 in 1 cable, press
to lock and rotate to unlock;• Change a module in 30 second
Module service comparison
• Fixed by the buckles, which are easy to loose and decrease the module flatness;
• Need to take off the cable slot and screwsfirst, which is complex
• Fixed by the buckles, which are easy to loose and decrease the module flatness;
• Fixed with screws. It takes a long time to take them off.
• The panel has a door structure, making the installation and uninstallation of the screws on the corner very difficult.
Absen U**lumen L**tronics S**si
Product Characteristic03
Product Characteristic
High Refresh rate
Low refresh rate High refresh rate
Slow dynamic response, image get blurred Fast dynamic response, image is clear
The higher refresh rate, the more stable and natural the image. On the contrary, lower refresh rate will cause flicker and jitter of the image.
Product Characteristic
Refresh Rate
TypePixel Pitch
Absen U company L company S company
DIP
P10 3840 1920 1920 960
P16 3840 1920 1920 2340
SMD
P10 3840 1920 1920 2400
P6 3840 1920 1920 1200
Product Characteristic
Varies kind of standard panel size
* All sizes of panels above is standard and will go into mass production to satisfy users' demand of creating
different size of screen.
Standard panel size:
1280*960*150mm、960*960*150mm;
1280*640*150mm、960*640*150mm;
Product Characteristic
Mask with waterproof roof
Prevent water from accumulating
Step roof
Increasing viewing angle & contrast ratio
Product Characteristic
Package
Standard: transportation rack Option: wood box
Product Characteristic
Connector & Screws
Product Specification04
Product Specification
Product SR16D SR10D SR10S SR6S
LED Type DIP DIP SMD SMD
Pixel Pitch/mm 16 10.66 10 6.66
Panel Dimension/mm 1280*960/960*960/1280*640/960*640 *150mm
Module Dimension/mm 320*320mm
Panel Weight/kg 53 55 50 50
Material Aluminum
Brightness/nit 12000 12000 10000 10000
Refresh Rate/Hz 3840 3840 3840 3840
Grey Scale/bit 16 16 16 16
Power Consumption 322/108 330/110 690/230 690/230
Driver Type Static 1/5 Static 1/4
Protection Rating IP67/IP65
Certification No certification/CE-TUV/UL48
Service Completely Front & Rear
Control System NOVA