Spi

t:M

echa

nica

l Anc

hors

152 www.itwcp.co.ukTechnical Helpline UK: 0800 731 4924Technical Helpline ROI: 1 800 882 388

Spit FIX Z Through Bolt Anchor

Features and Advantages• ETA Option 1 approved anchor - For cracked and non-cracked concrete

• Load assisted through fixing

• Anti-rotation expansion sleeve

• Drill bit required is same as anchor diameter

• Chamfered head - To protect the threads during installation

• Expansion sleeve design - Ensures maximum expansion

• Nut of Class 8 European Standard

• Rolled thread - To increase strength

• Stainless steel expansion sleeve - High quality

• Sleeve with three legs - To distribute the expansion stress on the whole cone

• Six lugs - To avoid rotation of the sleeve during tightening

• Spit FIX Z A4 has a stainless steel body - For better corrosion resistance and improved performance in cracked concrete

Technical Specification

FIX Z A4Bolt: A4 - 70 grade X2 Cr Ni Mo 17-12-2 NF ISO / DIS 3506-1Expansion sleeve: A4 grade X2 Cr Ni Mo 17-12-2 NF EN 10088 - 2Washer: A4 grade X5 Cr Ni Mo 17-12-2Nut: A4 - 80 grade X5 Cr Ni Mo 17-12-2 F ISO / DIS 3506 - 2 100 134

FIX Z BZPBolt: cold formed steel, DIN 1654 part 2 or 4 / zinc electroplated Zn5C/Fe (5µm), NFA 91102 Expansion sleeve: cold-rolled stainless steel, 1.4404, finish 2B, EN 10088Washer: steel, NFE 25514Nut: strength grade 8, EN 20898-2 / zinc electroplated (5µm), NFE 25009

Installation

Spit FIX Z self expanding stud anchor range. Torque controlled mechanical through fixing, for speed and efficiency on site. Conforms to ETA option 1, approved for an assured fix into cracked and non-cracked concrete.

Applications

• All steel constructions• Facades• Curtain wall• Staircases• Ladders• Guide railings• Stadium seating

Substrates

• Concrete• Solid stone

European Technical Approval

1

2

3

4

Pre-assemble nut and washer

ETA OPTION 1

Torque controlled expansion anchor, installed by hammering the bolt through the fixture. Expansion clip profile ensures the anchor pre-grips the hole surface prior to setting. Tightening the anchor pulls into the expansion sleeve expanding the clip and securing the fixture against the substrate

FIRERATED

Transport for London Underground authorised for use.Refer to pages 10 - 11.

Spi

t:M

echa

nica

l Anc

hors

153www.itwcp.ie

Spit FIX Z BZP - Zinc Plated

Spit FIX Z - Stainless Steel Grade A4-316

Eurocode Thread Overall Drill Max Min Min Minimum Max Box Ø Anchor Ø Fixture Anchor Drilling Thickness of Tightening Qty Length Thickness Depth Depth Base Material Torque

056330 M8 70mm 8mm 9mm 46mm 65mm 100mm 20Nm 100 056340 M8 90mm 8mm 29mm 46mm 65mm 100mm 20Nm 50056350 M8 110mm 8mm 49mm 46mm 65mm 100mm 20Nm 50 056370 M10 85mm 10mm 9mm 58mm 80mm 120mm 35Nm 50056380 M10 96mm 10mm 20mm 58mm 80mm 120mm 35Nm 50 056390 M10 140mm 10mm 64mm 58mm 80mm 120mm 35Nm 25055337 M12 100mm 12mm 8mm 68mm 95mm 140mm 50Nm 25 055393 M12 115mm 12mm 23mm 68mm 95mm 140mm 50Nm 25056620 M12 140mm 12mm 48mm 68mm 95mm 140mm 50Nm 25 056630 M12 180mm 12mm 88mm 68mm 95mm 140mm 50Nm 25056640 M12 220mm 12mm 128mm 68mm 95mm 140mm 50Nm 25 056670 M16 135mm 16mm 22mm 82mm 115mm 160mm 100Nm 10056680 M16 170mm 16mm 57mm 82mm 115mm 160mm 100Nm 10056690 M16 210mm 16mm 97mm 82mm 115mm 160mm 100Nm 10

Eurocode Thread Overall Drill Max Min Min Minimum Max Box Ø Anchor Ø Fixture Anchor Drilling Thickness of Tightening Qty Length Thickness** Depth Depth Base Material Torque

054270* M6 55mm 6mm 5 - 15mm 25mm 35mm 100mm 10Nm 100 050441 M8 55mm 8mm 5mm 35mm 52mm 100mm 20Nm 100054610 M8 70mm 8mm 7 - 20mm 35mm 52mm 100mm 20Nm 100 055343 M8 90mm 8mm 27 - 40mm 35mm 52mm 100mm 20Nm 50050466 M10 65mm 10mm 5mm 42mm 62mm 100mm 35Nm 50 054630 M10 75mm 10mm 15mm 42mm 62mm 100mm 35Nm 50054640 M10 95mm 10mm 20 - 35mm 42mm 62mm 100mm 35Nm 50 050442 M10 120mm 10mm 45 - 60mm 42mm 62mm 100mm 35Nm 25055344 M12 80mm 12mm 5mm 50mm 75mm 140mm 50Nm 25 055345 M12 100mm 12mm 6 - 25mm 50mm 75mm 140mm 50Nm 25055394 M12 115mm 12mm 21 - 40mm 50mm 75mm 140mm 50Nm 25 054680 M12 140mm 12mm 46 - 65mm 50mm 75mm 140mm 50Nm 25050443 M16 125mm 16mm 8 - 30mm 64mm 95mm 172mm 100Nm 25 054700 M16 150mm 16mm 33 - 55mm 64mm 95mm 172mm 100Nm 10050444 M16 170mm 16mm 53 - 75mm 64mm 95mm 172mm 100Nm 10* Not ETA approved** Where there are two figures given, the second is maximum fixture thickness in case of deep embedment.

Heavy Duty Anchor