spiro / air ducts - heinenhopman.com · spiro duct uninsulated spiro duct pre-insulated type Ød l...

>

Ventilation Air Conditioning RefrigerationHeating

22ºCInside

OUTSIDEHUMIDITY

PROVIDED BYHEINEN & HOPMAN

35 C

90%

productsspiro / Air ducts

Ducting

Proper distribution of air is of great importance on the performance of the entire HVAC system and so your comfort. Heinen & Hopman offers a complete range of products to overcome various technical challenges. Together with our design software we can design and offer a complete air duct system in order to ensure optimal comfort. The air ducts systems will be designed for each individual situation and can consist of various solutions and specifications, like the type of material, circular air ducts, rectangular air ducts, thermal insulation, fittings, and flow control. Range and MaterialSpiro air ducts, including related fittings and components, are available in a range from Ø80 till Ø1000mm, with a thickness varying from 0,4mm till 2,5mm. Custom solutions can be designed if required, based on the specific situation onboard.The following types of material are available:- Sendzimir galvanized steel;- Stainless steel (AISI-316 and AISI-304);- Aluminum (ISO 209-1).

classificationThe dimensions are according to Eurovent. Airtightness class according to DIN-24147 “B-class” (on request it is possible to supply in “C-class”). Pre-insulatedPre-insulated spiro ducts and components are used for the distribution of conditioned air. Pre-insulated ducts exist of a double steel sheet with a layer of thermal insulation in between. The thermal insultation has a thickness of 16mm, however other sizes are available upon request. The nominal size Ø100–500 always refers to the inner diameter, irrespective of the type in question. There are two types to choose from, type 30 and type 50.

The inner sheath is made from standard units from the Safeprogramme. This means that adequate properties are the same as for the corresponding Safe-units.

The outer sheath is supplied as standard with hot dip galvanised steel sheet Z 275. It can also be made in plastic coated galvanised steel sheet, stainless steel or alu-zink to special order.The benefits of pre-insulated ducting and components are:- No chance for condensation on the ducting;- Sound reduction;- Increased efficiency, since temperature rise of conditioned air (caused by transmission through the ducts) is reduced to a minimum.

un-insulated Un-insulated spiro ducts and components are used for distribution of not conditioned air. The un-insulated spiro is available with the following special designs:• Dimensions Intermediate internal diameter dimensions between 63 mm to 1600 mm.• Extra tight, with seam seal (Air ducts with low leakage rate) When extremely low leakage rate is required, the ducts can also be supplied with a special rubber seal in the seam. This seal is very effective (efficient) at reducing leakage air.• Reinforcement corrugations Ducts of Ø250 mm and above are provided with corrugations to increase radial stiffness.

Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Spiro duct uninsulated

Spiro duct pre-insulated

Type Ød L t Kg/m

R-80 80 3000 6000 0,4 0,86

R-100 100 3000 6000 0,4 1,08

R-125 125 3000 6000 0,4 1,35

R-160 160 3000 6000 0,4 2,17

R-200 200 3000 6000 0,5 2,71

R-225 224 3000 6000 0,5 3,03

R-250 250 3000 6000 0,5 3,39

Type Ød ØD L Kg/m

PR-80 80 112 3000 2,9

PR-100 100 132 3000 3,6

PR-125 125 157 3000 4,3

PR-160 160 192 3000 5,3

PR-200 200 232 3000 6,5

PR-225 224 260 3000 7,33

PR-250 250 280 3000 8

PR-315 315 355 3000 14


Bend uninsulated 15

Rm = 1 x Ød1

Bend insulated 15

Rm = 1 x Ød1

Type Ød Kg/m

B-80-15 80 0,11

B-100-15 100 0,15

B-125-15 125 0,18

B-160-15 160 0,25

B-200-15 200 0,37

B-225-15 224 0,47

B-250-15 250 0,65

Type Ød ØD L Kg/m

PB-80-15 80 112 13 0,25

PB-100-15 100 132 13 0,35

PB-125-15 125 157 16 0,50

PB-160-15 160 192 21 0,65

PB-200-15 200 232 24 0,70

PB-225-15 224 260 26 0,90

PB-250-15 250 280 30 1,35

PB-315-15 315 355 33 1,75

O O


Bend uninsulated 30

Rm = 1 x Ød1

Bend insulated 30

Rm = 1 x Ød1

Type Ød Kg/m

B-80-30 80 0,15

B-100-30 100 0,18

B-125-30 125 0,20

B-160-30 160 0,32

B-200-30 200 0,62

B-225-30 224 0,72

B-250-30 250 0,91

Type Ød ØD L Kg/m

PB-80-30 80 112 27 0,35

PB-100-30 100 132 27 0,45

PB-125-30 125 157 33 0,60

PB-160-30 160 192 43 0,90

PB-200-30 200 232 54 1,30

PB-225-30 224 260 60 1,55

PB-250-30 250 280 67 2,10

O O


Bend uninsulated 45

Rm = 1 x Ød1

Bend insulated 45

Rm = 1 x Ød1

Type Ød Kg/m

B-80-45 80 0,17

B-100-45 100 0,21

B-125-45 125 0,29

B-160-45 160 0,48

B-200-45 200 0,80

B-225-45 224 0,82

B-250-45 250 1,05

Type Ød ØD L Kg/m

PB-80-45 80 112 41 0,45

PB-100-45 100 132 41 0,55

PB-125-45 125 157 52 0,75

PB-160-45 160 192 66 1,25

PB-200-45 200 232 83 1,65

PB-225-45 224 260 93 2,15

PB-250-45 250 280 103 2,60

O O


Bend uninsulated 90

Rm = 1 x Ød1

Bend insulated 90

Rm = 1 x Ød1

Type Ød Kg/m

B-80-90 80 0,26

B-100-90 100 0,31

B-125-90 125 0,48

B-160-90 160 0,62

B-200-90 200 1,12

B-225-90 224 1,33

B-250-90 250 1,77

Type Ød ØD L Kg/m

PB-80-90 80 112 105 0,70

PB-100-90 100 132 100 0,85

PB-125-90 125 157 125 1,20

PB-160-90 160 192 160 2,05

PB-200-90 200 232 200 2,95

PB-225-90 224 260 225 3,60

PB-250-90 250 280 250 4,45

O O


couplers uninsulated

couplers insulated

Type Ød L Kg/m

M-80 80 90 0,1

M-100 100 90 0,2

M-125 125 90 0,2

M-160 160 90 0,3

M-200 200 90 0,3

M-225 224 90 0,4

M-250 250 90 0,6

Type Ød ØD L Kg/m

PM-80 80 112 100 0,3

PM-100 100 132 100 0,4

PM-125 125 157 100 0,5

PM-160 160 192 100 0,6

PM-200 200 232 100 0,7

PM-225 224 260 100 0,85

PM-250 250 280 100 1,05

PM-315 315 355 135 1,25


Flexible duct uninsulated

Flexible duct insulated

Type Ød L Kg/m

S-80 80 1000 0,23

S-100 100 1000 0,31

S-125 125 1000 0,39

S-160 160 1000 0,50

S-200 200 1000 0,62

S-250 250 1000 0,78

S-315 315 1000 0,98

S-355 355 1000 1,58

S-400 400 1000 1,78

S-450 450 1000 2,00

S-500 500 1000 2,22

Type Ød ØD L Kg/m

PS-80 80 130 1000 0,84

PS-100 100 150 1000 1,06

PS_125 125 175 1000 1,44

PS-160 160 210 1000 1,72

PS-200 200 250 1000 2,20

PS-250 250 300 1000 2,64

PS-315 315 365 1000 3,66


nipple

Hanger

For un-insulated pipe For insulated pipeType Ød W L Kg/m

N-80 80 40 7-14 0,09

N-100 100 40 7-14 0,12

N-125 125 40 7-14 0,15

N-160 160 40 7-14 0,19

N-200 200 40 7-14 0,30

N-225 224 40 7-14 0,30

N-250 250 60 7-14 0,52

Type ØD Kg/m

U-80 80 0,13

U-100 100 0,15

U-125 125 0,18

U-160 160 0,22

U-200 200 0,27

U-225 225 0,3

U-250 250 0,33

Type ØD Kg/m

UV-80 112 0,2

UV-100 132 0,2

UV-125 157 0,2

UV-160 192 0,3

UV-200 232 0,5

UV-225 260 0,6

UV-250 280 0,7


Hanger

For un-insulated pipe For insulated pipe

Hanger

For un-insulated pipe For insulated pipe

Type Ød Kg/m

HU-80 80 0,2

HU-100 100 0,2

HU-125 125 0,2

HU-160 160 0,2

HU-200 200 0,3

HU-225 225 0,3

HU-250 250 0,3

Type Ød Kg/m

HUV-80 112 0,2

HUV-100 132 0,2

HUV-125 157 0,2

HUV-160 192 0,3

HUV-200 232 0,3

HUV-225 260 0,4

HUV-250 280 0,4

Type Ød Kg/m

GU-80 80 0,2

GU-100 100 0,2

GU-125 125 0,2

GU-160 160 0,2

GU-200 200 0,3

GU-225 225 0,3

GU-250 250 0,4

Type Ød Kg/m

GUV-80 112 0,2

GUV-100 132 0,2

GUV-125 157 0,2

GUV-160 192 0,3

GUV-200 232 0,3

GUV-225 260 0,4

GUV-250 280 0,4


Reducer insulated

Reducer uninsulated

Type Ød ØD1 Ød2 ØD2 L Kg

PR-100/80 100 132 80 112 68 0,4

PR-125/80 125 157 80 112 85 0,5

PR-125/100 125 157 100 132 75 0,5

PR-160/80 160 192 80 112 105 0,7

PR-160/100 160 192 100 132 95 0,7

PR-160/125 160 192 125 157 80 0,7

PR-200/100 200 232 100 132 120 1,1

PR-200/125 200 232 125 157 105 0,9

PR-200/160 200 232 160 192 85 0,9

PR-225/100 225 260 100 132 160 1,5

PR-225/125 225 260 125 157 126 1,5

PR-225/160 225 260 160 192 78 1,3

PR-225/200 225 260 200 232 23 1,1

PR-250/100 250 280 100 132 98 2,0

PR-250/125 250 280 125 157 150 1,6

PR-250/160 250 280 160 192 135 1,5

PR-250/200 250 280 200 232 115 1,5

PR-250/225 250 280 225 260 130 1,6

PR-315/200 315 355 200 232 149 t.b.d.

PR-315/250 315 355 250 280 128 t.b.d.

Type Ød Ød2 L Kg

F-100/80 100 80 61 0,16

F-125/80 125 80 73 0,16

F-125/100 125 100 64 0,14

F-160/80 160 80 92 0,24

F-160/100 160 100 83 0,16

F-160/125 160 125 71 0,20

F-200/100 200 100 84 0,24

F-200/125 200 125 90 0,27

F-200/160 200 160 73 0,26

F-225/100 225 100 200 0,7

F-225/125 225 125 166 0,7

F-225/160 225 160 87 0,7

F-225/200 225 200 66 0,45

F-250/100 250 100 236 1,0

F-250/125 250 125 133 0,57

F-250/160 250 160 117 0,4

F-250/200 250 200 103 0,55

F-250/225 250 225 89 0,53


t-piece uninsulated

t-piece insulated

Type Ød1 Ød3 L H Kg

T-80/80 80 80 170 52 0,4

T-100/80 100 80 170 62 0,7

T-100/100 100 100 190 65 0,6

T-125/80 125 80 170 75 0,6

T-125/100 125 100 190 78 0,7

T-125/125 125 125 215 82 0,8

T-160/80 160 80 170 92 0,8

T-160/100 160 100 190 95 0,9

T-160/125 160 125 215 99 1,0

T-160/160 160 160 160 104 1,2

T-200/80 200 80 170 112 1,0

T-200/100 200 100 190 115 1,1

T-200/125 200 125 215 119 1,3

T-200/160 200 160 260 124 1,5

T-200/200 200 200 330 130 1,8

T-225/100 225 100 190 127 1,3

T-225/125 225 125 215 131 1,5

T-225/160 225 160 260 136 1,8

T-225/200 225 200 330 142 2,0

T-225/225 225 225 330 142 2,1

T-250/100 250 100 160 140 1,5

T-250/125 250 125 215 144 1,7

T-250/160 250 160 260 149 2,0

T-250/200 250 200 330 155 2,4

T-250/225 250 225 350 163 2,5

T-250/250 250 250 380 163 2,7

Type Ød1 ØD1 Ød3 ØD3 L H Kg

PT-80/80 80 112 80 112 155 54 0,7

PT-100/80 100 132 80 112 155 64 0,9

PT-100/100 100 132 100 132 180 67 1,0

PT-125/80 125 157 80 112 155 76 1,1

PT-125/100 125 157 100 132 180 79 1,2

PT-125/125 125 157 125 157 220 84 1,3

PT-160/80 160 192 80 112 165 94 1,2

PT-160/100 160 192 100 132 180 97 1,3

PT-160/125 160 192 125 157 220 102 1,6

PT-160/160 160 192 160 192 265 107 1,8

PT-200/80 200 232 80 112 150 114 1,5

PT-200/100 200 232 100 132 180 117 1,7

PT-200/125 200 232 125 157 220 115 2,0

PT-200/160 200 232 160 192 260 120 2,4

PT-200/200 200 232 200 232 360 120 3,0

PT-225/100 225 260 100 132 175 127 2,3

PT-225/125 225 260 125 157 215 132 2,3

PT-225/160 225 260 160 192 260 137 2,5

PT-225/200 225 260 200 232 346 137 2,9

PT-225/225 225 260 225 260 346 137 3,5

PT-250/100 250 280 100 132 225 140 2,8

PT-250/125 250 280 125 157 220 140 3,3

PT-250/160 250 280 160 192 256 150 3,7

PT-250/200 250 280 200 232 306 150 4,2

PT-250/225 250 280 225 260 350 150 4,4

PT-250/250 250 280 250 280 307 150 4,6


Flexible Aluminium sound attenuator

The flexible sound attenuator exist of a perforated ALUFLEX inside and outside hose with in between an 25mm (50mm optional) thick glass wool with a volume weight of 24kg/m3 what will cause a high sound attenuation. The sound attenuator is non-flammable according DIN4102 A1-class.

The maximum airflow is 30 m/s, with a standard length of 500, 750, 1000, 1500 and 2000 mm.

Available internal diameters with 25mm isolation: Sound reduction 25mm Length 1 meter

Ø In Ø Out Kg

80 131 0,83

100 156 0,96

125 186 1,15

150 206 1,59

160 216 1,65

180 236 1,87

200 256 2,1

224 286 2,25

250 306 2,36

280 336 2,62

300 356 3,0

315 362 3,2

355 406 3,5

400 456 4,1

450 506 4,5

Octave Center Frequency (Hz)

Diameter mm 125 250 500 1K 2K 4K

100 7.5 8.8 19.9 42.6 60.7 27.2

125 8.1 8.5 18.1 39.9 48.5 21.4

160 3.5 4.9 10.7 25.2 48.0 24.4

200 3.0 4.2 10.3 28.3 24.6 16.2

250 3.9 4.6 10.4 26.5 18.1 13.5

www.heinenhopman.com

Heinen & Hopman encourages a more

sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

the option of reducing energy consumption

and thus co2 emissions. Visit

greenmanifest.info for more information.

BrazilT: +5521 3587 4241/4244E: [email protected]

France - La ciotatT: +334 4204 8685E: [email protected]

France - grasseT: +336 3090 7786 E: [email protected]

GermanyT:+49 4073 1680E: [email protected]

indiaT: +9133 6499 1293E: [email protected]

ItalyT: +3901 8745 7970E: [email protected]

The Netherlands (HQ)T: +313 3299 2500E: [email protected]

The Netherlands (Rotterdam)T: +317 8890 8050E: [email protected]

NorwayT: +47 6919 0900E: [email protected]

Peoples Republic of ChinaT: +8621 3253 2896E: [email protected]

Peoples Republic of ChinaT: +86 510 8528 1763E: [email protected]

PolandT: +489 1433 1800E: [email protected]

RomaniaT: +402 3644 8222E: [email protected]

RussiaT: +7 (4012) 308 801E: [email protected]

SingaporeT: +65 6897 7879E: [email protected]

South KoreaT: +8270 4901 0000E: [email protected]

SpainT: +349 3225 9668E: [email protected]

SwedenT: +46 3121 7500E: [email protected]

TurkeyT: +9021 6493 8118E: [email protected]

UAE (Abu Dhabi) T:+971 2550 4147E: [email protected]

UAE (Dubai)T: +971 4263 5453E: [email protected]

USA - Fort Lauderdale, FloridaT: +195 4463 0110E: [email protected]

USA - Houma, Louisiana T: +198 5876 7989E: [email protected]

spiro / air ducts - heinenhopman.com · spiro duct uninsulated spiro duct pre-insulated type Ød l...

Documents