spider and 1

R

GLASS FACADE FITTINGSSpider Fittings With FinSplice PlatesFin PlatesSpider Fittings Without FinPoint Fixed RoutelsTension Cable SystemGlass Canopy System

Catalogue 2009-10

IND

EX

SPIDER & CANOPY FITTINGS

Spider Fittings (With Fin)

Splice Plate

Fin Plate

Spider Fittings (Without Fin)

Point Fixed Routels

Tension Bar/Cable (Bracing Glass Curtain Wall)

Screw Cable Junction

Tension Cable/Rod Suspension Bar

Canopy Fittings

www.ozone-india.com

R

1

STRUCTURAL GLAZINGS-SPIDER FITTINGS: (SS 316)

Transparent glass is now being increasingly used to enhance visibility of the

interior elements of buildings from the outside. Transparent glass facades also

serve to create an concept of space and openness give the signature of modern

design.

With continuous advances in architectural technology. Glass Curtain Walls are

finding increased usage in more and more applications. Glass curtain walls have

evolved from to singular aluminium alloy frame to serialized frameless glass

curtain walls. These would include Fin type, Hanger Type, Hanger plus spider

fitting type and full spider fitting type.

Suspended frameless glass curtain walls is achieved by using spider fittings and

accessories, thus creating an open space feeling and providing clear vision.

UNIQUENESS OF A SPIDER FITTING LIES IN:

• Flexibility in forming structures which withstand wind pressure,

also allowing larger areas to be covered.

• Eliminate disadvantages of Aluminium Frame.

• Provide unobstructed, full, neat and bright outlook to the Architectural

Structure. Such systems also enhances the Artistic and Technical capabilities

of Designers and Architects.

CUSTOMISED FITTINGS FOR PROJECTS

Ozone also offers Customized Stainless Steel Spider Fittings for special applications

(These are however subjected to design, quantity and lead time limitations.)

DESIGNING AND INSTALLATION SERVICES

Ozone also provides Structural Design Solutions for Spider applications including

load calculations, wind pressure and deflection along with offering 2D and 3D

designs for actual facade.

Ozone, through its subsdiary (Ozone Matrix Infracon Private Limited) also provides

turnkey spider installation services.

ARCHITECTURAL SPIDER FITTINGS

www.ozone-india.com2

Spider Fittings (With Fin)

Spider Fittings (Without Fin)

R

SPIDER FITTINGS

www.ozone-india.com

R

SPIDER FITTINGS(With Fin)

Typical Installation Diagram

OSP-A22

OSP-A22

OSP-FP-200/300/400

OSP-FP-200/300/400

OSP-SP-250/300/350

OSP-SP-250300/350

/

3

www.ozone-india.com

R

Specification Text One way spider • Installed with articulated routels • Teflon washers prevent glass damage • For ceiling to glass installation • Flexibility in installation • Stainless steel grade 316

OSP-A22ApplicationTo Hold glass with ceiling (single point)

SPIDER FITTINGS

SINGLE POINT SPIDER FOR HOLDINGGLASS WITH CEILING.

94

4

www.ozone-india.com

R

Material:SS-316

Specification Text Two way spider • Installed with articulated routels • Teflon washers prevent glass damage • Firm holding with fin • Flexibility in installation • Stainless steel grade 316


2 WAY “Spider” Fitting with FIN for Structural Glazing to Suit 2 Panel Glass Assembly.

OSP-A2ApplicationTo Hold Two Glasses with Fin

94 9419

5

www.ozone-india.com

R

SPIDER FITTINGS

TWO POINT SPIDER FOR HOLDINGGLASS WITH WALL.

Specification Text Two way spider 90º • Installed with articulated routels • Teflon washers prevent glass damage • For wall to glass installation • Flexibility in installation • Stainless steel grade 316

OSP-A44ApplicationTo Hold glass with wall (Two point)

94

6

www.ozone-india.com

R

Material:SS-316

4 WAY “Spider” Fitting with FIN for Structural Glazing to Suit 2 or 4 Panel Glass Assembly.

OSP-A4ApplicationTo Hold Four Glasses with Fin

Specification Text Four way spider • Installed with articulated routels • Teflon washers prevent glass damage • Firm holding with fin • Flexibility in installation • Stainless steel grade 316


94 9419

7

www.ozone-india.com

R

OSP-SP-250 ApplicationTo Hold Two Pieces of Fin together

Specification Text Splice Plate • Three point holding with each fin part • Elongated holes allows installation flexibility • Teflon washers to prevent damage to glass

SPIDER ACCESSORIESSPLICE PLATES

170

350

60 6011582

44

44

115







170

400

50 50100 100 10082

44

44

300

9090

43

43

846060

8

www.ozone-india.com

R

200

93

50 50100

45

OSP-FP-400ApplicationTo Hold Fin with Ceiling or Floor

Specification Text Fin Plate • Three point holding of fin • Elongated holes allows installation flexibility • Teflon washers to prevent damage to glass • Flat base to hold strongly with floor or ceiling


Specification Text Fin plate • Two point holding of fin • Elongated holes allows installation flexibility • Teflon washers to prevent damage to glass • Flat base to hold strongly with floor or ceiling


Specification Text Fin plate • Three point holding of fin • Elongated holes allows installation flexibility • Teflon washers to prevent damage to glass • Flat base to hold strongly with floor or ceiling

Hole diameter- 20mm

Hole diameter- 20mm

Hole diameter- 20mm

SPIDER ACCESSORIESFIN PLATES

9

www.ozone-india.com

R

OSP-B-222ApplicationTo Hold Two Glasses without Fin at 180º

Specification Text Two Way Spider-180º • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

OSP-B-221ApplicationTo Hold Glass at one point without fin

Specification Text One Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

SPIDER FITTINGS(Without Fin)

10

www.ozone-india.com

R

OSP-B-223ApplicationTo Hold three Glasses without Fin

220 220

310

Specification Text Three Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

OSP-B-224ApplicationTo Hold Four Glasses without Fin

Specification Text Four Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

OSP-B-222AApplicationTo hold Two Glasses without fin at 90º



11

www.ozone-india.com

R

OSP-B-302ApplicationTo Hold Two Glasses without Fin at 180º


OSP-B-301ApplicationTo Hold Glass at one point without fin

Specification Text One Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316


OSP-B-302AApplicationTo hold Two Glasses without fin at 90º


12

www.ozone-india.com

R

OSP-B-303ApplicationTo Hold three Glasses without Fin

220 220

Specification Text Three Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

OSP-B-SH-01ApplicationTo hold without fin spiders to structure


OSP-B-304ApplicationTo Hold Four Glasses without Fin

Specification Text Four Way Spider • Attached to a fixed structure • Installed with articulated routels • Designed for holding with a fixed structure • Flexibility in installation • Stainless steel grade 316

13

www.ozone-india.com

R

POINT FIXED ROUTELS

OSP-AFB-36-FLApplicationTo use along with Spiders

Specification Text Articulated Routel • Flat head bolt • Teflon washers to prevent damage to glass • Adjustable up to 15 mm thickness of glass • Stainless steel grade 316

ARTICULATED FLAT HEAD

OSP-AFB-36-CSApplicationTo use along with spiders

Specification Text Articulated Routel • Countersunk head bolt • Teflon washers to prevent damage to glass • Adjustable up to 15 mm thickness of glass • Stainless steel grade 316

ARTICULATED COUNTER SUNK HEAD

OSP-FB-CSApplicationTo use along with spiders

Specification Text Fixed Routel • Countersunk head bolt • Teflon washers to prevent damage to glass • Adjustable up to 15 mm thickness of glass • Smaller in size

FIXED COUNTER SUNK HEAD

OSP-FB-FLApplicationTo use along with spiders

Specification Text Fixed Routel • Flat head bolt • Teflon washers to prevent damage to glass • Adjustable up to 15 mm thickness of glass • Smaller in size

FIXED FLAT HEAD

14

www.ozone-india.com

R

TENSION CABLETYPICAL DESCRIPTION

15

www.ozone-india.com

R

OSP-TCSB-1 OSP-TCSB-2 OSP-TCSB-3

Tension Cable Suspension Bar OSP-TCSB Series Fluoride Carbon Spray Coating

Tension Bar Type Suspension Bar Pivot

Tension Rod Suspension Bar OSP-TRSB Series

OSP-TRSB-2 - Φ16 OSP-TRSB-2 - Φ18

OSP-TRSB-1

OSP-TRSB-1

OSP-TRSB-2 Φ18OSP-TRSB-2 Φ16

TENSION CABLE / RODSUSPENSION BAR

16

www.ozone-india.com

R

TENSION BAR LOAD RATINGAxial load for tension bar assembly to be selected according to table below:Table 1. Designed value for tension bar pulling force

TENSION BARBRACING GLASS CURTAIN WALL

17

www.ozone-india.com

R

Simplified Diagram

A TYPE TENSION BAR HEAD

B TYPE TENSION BAR HEAD

Simplified DiagramDatasheet

OSP-TBH X XX

Tension bar diameter

Tension bar serial number

Tension bar

Datasheet

TENSION BARBRACING GLASS CURTAIN WALL

18

www.ozone-india.com

R

Technical Parameters For Frequently Used Stainless

Steel Tension Cable

TENSION CABLEBRACING GLASS CURTAIN WALL

Technical Parameters For Frequently Used Stainless Steel Tension Cable

19

www.ozone-india.com

R

SERIES 1 - A TYPE TENSION CABLE HEAD

Simplified Diagram

Datasheet


1B.: MATERIALS FOR STEEL STRANDS Steel strands or steel cables to match sleeve pipe connectors should be steel strands or steel cables specified in GB/T9944 and GB/T8918. Meanwhile, quality certificate for material should be provided. Materials for steel strands in this

1A.: MATERIALS FOR SLEEVE PIPE CONNECTOR Materials for sleeve pipe connector should have tensile strength σ ь≥520 MPa , shrinkage rate ψ ≥ 40% and elongation rate δ ѕ≥ 25% as specified in GB/T1220, GB/T699, GB/T3077 and GB/T1591; the ratio of tensile strength σ ь and yeild strength σ ѕ should be greater than 1.4. Meanwhile, quality certificate for material should be provided. Materials for sleeve pipe connector should be austenite stainless steel OCr18Ni9 (304) or OCr17Ni12Mo2 (316).

standard chart are austenite stainless steel OCr18Ni9 (304) or OCr17Ni12Mo2 (316) where nominal diameter range is 6mm-28mm, tensile strength range is 1000MPa ~1400MPa and actual value is 1300MPa.

2.0: CONDITIONS FOR USE2.a Ambient operating temperature for tension bars is -20 °C-+320 °C. It is strictly prohibited to use over 320 °C.2.b Tension bars should not be bent or cut while in use.2.c Anticorrosive measures should be taken when tension bars are used in corrosive environment.

20

www.ozone-india.com

R

SERIES 1 - B TYPE TENSION CABLE HEAD

Simplified DiagramDatasheet


1 series A type: one end is fixed, another end is adjustable ; 1 series B type: both ends can be adjustable ; F = Length of the tension sling head + pressing part + bolt head (center to center) G = Range of the adjustable length L = Total length of the tension cable / bar

ABCD are the specification of the tension cable head, which is used as the data of producing the cable ring.

A = size of the slot in the tension cable head, and this is the thickness of the cable / bar ring (max. length ) B = diameter of the tension cable head C = upper size of the cable ring (max. size ) D = underside size of the cable ring (min. size) G+- = that the adjustable length range can be reduce or increase L-F = bolt + steel cable+ fixed end -----this is to evaluate the steel cable length when they produce the tension cable E = the diameter of the forelock 2 G--- = as the B type tension sling is two ends can be adjustable, so the total length can be adjusted 2G range

21

www.ozone-india.com

R

SERIES II -

A TYPE TENSION CABLE HEAD

Datasheet

SERIES II -

B TYPE TENSION CABLE HEAD

Simplified Diagram

Datasheet


ABCD are the specification of the tension cable head, which is used as the data of producing the cable ring.

A = size of the slot in the tension cable head, and this is the thickness of the cable / bar ring (max. length ) B = diameter of the tension cable head C = upper size of the cable ring (max. size ) D = underside size of the cable ring (min. size) G+- = that the adjustable length range can be reduce or increase L-F = bolt + steel cable+ fixed end -----this is to evaluate the steel cable length when they produce the tension cable E = the diameter of the forelock 2 G--- = as the B type tension sling is two ends can be adjustable, so the total length can be adjusted 2G range

Simplified Diagram

2 series A type : one end is fixed, another end is adjustable ; 2 series B type : both ends can be adjustable ; F = Length of the tension sling head + pressing part + bolt head (center to center) G = Range of the adjustable length L = Total length of the tension cable / bar

22

www.ozone-india.com

R

Simplified Diagram

Datasheet

SCREW CABLE JUNCTION

23

www.ozone-india.com

R

CANOPY FITTINGS

Concept-6

Concept-1

OCF-01

OSP-B-222

OCF-03

OC-316

OC-316

OSP-AFB-36-FL

OCF-01

OCF-02

OC-316

Concept-4OCF-03

OCF-01

OCF-02OSP-AFB-36-FL

Concept-5

OCF-03

OCF-01

OSP-B-222 OCF-02

Concept-7

Concept-8

OCF-03

OCF-01 OSP-B-224

OCF-02

OSP-AFB-36-FL

Concept-3

OCF-01

OSP-AFB-36-FL

OCF-02

Concept-2

Suggestive Product Installation & Concept

24

www.ozone-india.com

R

CANOPY FITTINGS

Suggestive Product Installation & Concept

OCF-01 OCF-02

OCF-03

OCF-316

OCF-ROD

25

www.ozone-india.com

R

26

CANOPY FITTINGS

16010

95 +

10

120 22

≤

8026

17

120

OCF-01ApplicationTo Hold Glass with the Wall at 90 degrees

Specification Text Glass to Wall Connector for Canopy • Threaded portion to adjust the height • Suitable for small sized canopy • Stainless steel grade 316

36

90+

10

16.5

4222

45

Specification Text Glass Connector for Canopy • To be used with OCF-03 with a cable or rod • Length adjustable • More gripping surface • Flat head bolt • Suitable for a canopy of 2mx2m with two pairs • Stainless steel grade 316

OCF-02ApplicationTo Hold Glass for Canopy with cable /rod with OCF-03

17

26 10

4310

Ø16.5

100

Specification Text Glass Connector for Canopy • To be used with OCF-02 with a cable or rod • More gripping surface • Firm base to have a secure seating • Suitable for a canopy of 2mx2m with two pairs • Stainless steel grade 316

OCF-03ApplicationTo Hold the Cable or Rod with the Wall.To be used as a pair with OCF-02

OC-316ApplicationTo couple OCF-02 and OCF-03 usingconnecting rod or cable

Specification Text Cable/Rod Connector for OCF-02 or OCF-03 • To be used with OCF-02/03 with a cable or rod • Supplied in pairs with clock wise and counter clock wise threads • Recommended with 16 mm connecting rod • Stainless steel grade 316

OCF-RODApplicationTo attach canopy fittings

Specification Text Connecting rod for canopy • Coupling element between OCF 2 and OCF 3 • Diameter of the rod 16 mm • Stainless steel grade 316

ø16mm

www.ozone-india.com

R

27

CANOPY FITTINGS

OCF-01-S

OCF-03-S

OCF-02-S

Suitable For Small Canopies In

Interiors/Exteriors Applications

OCF-01-SApplicationTo Hold Glass with the Wall at 90º

Specification Text Glass Connector for Canopies • Adjustable in angle and distance • Firm base to have a secure seating • Allows gradient for canopies

OCF-02-SApplicationTo Hold Canopy Glass with Cable or Rod along with OCF-03-S

Specification Text Glass Connector for Canopies • Adjustable in nature • To be used with OCF-03-S • Allows gradient for canopies • Teflon washers to prevent damage to the glass • Flat head bolt

OCF-03-SApplicationTo Hold the Cable or Rod with the Wall. To be used as a pair with OCF-02-S

Specification Clause Wall Connector for Canopy • To be used with OCF-02-S with a cable or rod • More gripping surface • Firm base to have a secure seating • Suitable for a canopy of 2mx2m with two pairs

www.ozone-india.com

R

Specification Text• Stainless Steel 304 Grade• Brushed Finish• Plate Thickness (Base And Fin) = 10 mm• Wall Mounted With Fastners• Max Glass Size (using 2 fittings)=1800 mm X 1100 mm• Slope = 5°• Available along with Laminated Safety Glass of 12.52 mm (Thickness)

OCF-11-DE


OCF-22-TR

28

GLASS CANOPY SYSTEM

OCF-11-DEDolphin eye design Wall mounted Canopy Fitting with Glass on Bottom.

OCF-22-TRTrio shaped Wall mounted Canopy Fitting with Glass on Top.

DESIGN PENDING

DESIGN PENDING

660

www.ozone-india.com

R


OCF-33-SWSword type Wall mounted Canopy Fitting with Glass slided in Center Slot.

29

GLASS CANOPY SYSTEMS

OCF-33-SW

DESIGN PENDING DESIGN PENDING

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

OZONE ARCHITECTURAL PRODUCTSFAX: 91-11-45576688/45576699

www.ozonehArdwAre.com

COPY

RIGH

T© 20

09 1S

T OCT

OBER

2009

EDIT

ION

OZON

E OVE

RSEA

S LTD

. (Ex

pORT

)

To know more about OZONE products please log on to

www.ozonehardware.comTrademark & Copyright Owner:Ozone Overseas Ltd.New Delhi -15

BangaloreTintoretto- Vg 102Purva VeneziaBangalore

Chennai18/59A, Montieth Road, Egmore, Chennai

Works:Trilokpur Road, Kheri, NahanDistrict - SirmourKala AmbHimachal Pradesh

Phone : + 61 (3) -98130748Mobile Number : +61 (0) 4 401 301 02E-mail : [email protected]

Melbourne, Australia

Toronto, CanadaOzone Resources Ltd.Phone : 1647-200-4244 E-mail: [email protected]

International Offices

MumbaiSagar Height, Sakinaka Andheri East Mumbai

Chandigarh 842, NACMani MajraChandigarh

Branch Offices :

India

Corporate Office:New DelhiH-40, Bali Nagar,New Delhi-110 015Ph: +91-11-45576677 (30 Lines)Fax: +91-11-45576651E-mail: [email protected]

AhmedabadShivalik Plaza, Upper level,Ambavadi,Ahmedabad

spider and 1

Documents