specified fittings · 2018. 6. 5. · material: hdpe requirements of astm d3261 and are compatible...
TRANSCRIPT
N
W E
S
N
W E
SSpecified Fittings
Mailing AddressSpeci�ed Fittings
PO Box 28157Bellingham, WA 98228-0157
Washington LocationSpeci�ed Fittings
164 W. Smith Rd. | Bellingham, WA 98226-9616
360-398-7700 | 360-398-7051 Fax
Montana LocationSpeci�ed Fittings
483 Airport Rd. | Stevensville, MT 59870-6363
406-777-3466 | 406-777-7181 Fax
Mexico800-429-1705 Toll Free
800-574-1075 Fax
www.speci�ed�ttings.com sales@spec�t.com
HD
PE FM APPRO
VED D
IMEN
SION
SCLA
SS 150 - CLASS 200
Specified Fittings was established in 1997 and is one of the major manufacturers of plastic pipe fittings in
North America. We produce a full line of PVC and HDPE fittings, from adapters to wyes and everything in between
in a range of sizes to meet every need. End configurations are solvent weld, gasket, butt fusion, socket fusion,
compression and flange to name just a few. Sample fittings are available on request.
We use the Rieber gasket almost exclusively in our gasketed fittings because it offers a positive seal that is
both pressure and vacuum tight, thus preventing rolling or dislocation of the gasket during installation. Composition
of the standard gasket is SBR but we also offer EPDM (EP), Viton, nitrile and neoprene—to name a few—for those
applications where SBR may be unsuitable because of the characteristics of the fluid to be contained or the
properties of the surrounding environment.
Because we are a manufacturing company, we have extraordinary flexibility in what we can produce,
whether it is a "one-off" fitting or 10,000 fittings. We can also custom-build a fitting to your individual specifications.
Just give us a drawing and/or dimensions and we are confident that we will be able to fabricate a fitting that will
meet your exact requirements. Prior to shipment, all our products are inspected to insure the highest standards of
quality control and all items are clearly marked with special labels that are waterproof and will not bleed or wash off
under adverse weather or ground conditions.
In addition to our own products, we offer a broad-based commodity line including injection-molded HDPE,
electro fusion couplings, transition pieces, injection-molded sewer, C907, SDR21 gasketed and PVC DWV that
provides you with the convenience of a one-stop purchasing resource.
We have a comprehensive set of illustrated catalogs that are available to our customers and may be
ordered in entire sets or individually. The catalogs have been designed to provide the estimator/buyer with detailed
information on sizes, availability and technical information to complete an order and answer those frequently asked
question. Information that is not available in the catalog may be obtained from any member of our customer service
staff who are here to help you from Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST/PDT.
Sincerely,
Your Partners at Specified Fittings
SUBMITTAL DATA
Unit of Measure in inches
Dimensions may vary slightly
Version 1.3
Copyright 2013
This catalog represents FM Approved fittings 2” – 26”.
Iron Pipe Size and Ductile Iron Pipe Size
Every effort has been made to provide accurate information.
Please ask for an individual CAD drawing for critical fitting / structure issues.
Due to process and equipment upgrades, our dimensions may change.
SFI reserves the right to change any information contained in print or internet without notice.
These dimensions match our primary suppliers dimensions.
SFI accepts no responsibility for inaccurate information.
DISCLAIMER
1) All dimensions approximate, subject to change without notice
--Angle tolerance is +/- 2 degrees
--All other dimensions to +/- 1"
2) The drawings only applicable if a copy is referenced at time of order.
--Without a copy of drawing, fitting construction may differ from that shown.
3) Subject to Specified Fittings Standard Terms and Conditions.
Montana- 855-550-7659
406-777-3466
Washington- 888-734-8846
360-398-7700
Fax- 888-734-82585
www.specifiedfittings.com
Main Size Outlet Size H W A CL/150 PART # CL/200 PART #
3"-20" 2" 6 2.875 1.5 HD701SIZEFM150 HD701SIZEFM200
4"-20" 3" 6 4 1.5 HD701SIZEFM150 HD701SIZEFM200
5"-20" 4" 6.5 4.9 1.5 HD701SIZEFM150 HD701SIZEFM200
6"-20" 5" 8.5 6.25 1.5 HD701SIZEFM150 HD701SIZEFM200
8"-20" 6" 8.5 6.9 1.5 HD701SIZEFM150 HD701SIZEFM200
10"-20" 8" 9 9.1 1.5 HD701SIZEFM150 HD701SIZEFM200
12"-20" 10" 9 12 1.5 HD701SIZEFM150 HD701SIZEFM200
14"-20" 12" 10.5 14 1.5 HD701SIZEFM150 HD701SIZEFM200
16"-20" 14" 10.5 16 1.5 HD701SIZEFM150 HD701SIZEFM200
18"-20" 16" 10.5 18 1.5 HD701SIZEFM150 HD701SIZEFM200
20"-24" 18" 11.5 20 1.5 HD701SIZEFM150 HD701SIZEFM200
PART # EXAMPLE 12X4 BRANCH SADDLE CL 150 = HD701124FM150
(WHEN PART NUMBERING OUTLET SIZE ALWAYS FOLLOWS MAIN SIZE)
NOTE:
Description: IPS HDPE BRANCH SADDLES Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3"-24" X 2"-18" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #1
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
PRESSURE
SIZE OD L CLASS PART #
2" 2.375 4.25 150 MHD1902FM150
2" 2.375 4.25 200 MHD1902FM200
3" 3.5 3.94 150 MHD1903FM150
3" 3.5 4.8 200 MHD1903FM200
4" 4.5 4.25 150 MHD1904FM150
4" 4.5 8.5 200 MHD1904FM200
6" 6.625 5.2 150 MHD1906FM150
6" 6.625 9.88 200 MHD1906FM200
8" 8.625 5 150 MHD1908FM150
8" 8.625 5 200 MHD1908FM200
NOTE:
Description: IPS HDPE MOLDED CAPS Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #2
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
PRESSURE
SIZE OD A CLASS PART #
6" 6.625 9.25 150 HD1916FM150
6" 6.625 9.25 200 HD1916FM200
8" 8.625 9.25 150 HD1918FM150
8" 8.625 9.75 200 HD1918FM200
10" 10.75 9.5 150 HD19110FM150
10" 10.75 10.5 200 HD19110FM200
12" 12.75 11 150 HD19112FM150
12" 12.75 12 200 HD19112FM200
14 14 12 150 HD19114FM150
14" 14 12 200 HD19114FM200
16" 16 12 150 HD19116FM150
16" 16 12 200 HD19116FM200
18" 18 13 150 HD19118FM150
18" 18 13 200 HD19118FM200
20" 20 13 150 HD19120FM150
20" 20 13 200 HD19120FM200
24" 24 13 150 HD19124FM150
24" 24 20 200 HD19124FM200
26" 26 25.75 150 HD19126FM150
26" 26 25.75 200 HD19126FM200
NOTE:
Description: IPS HDPE FABRICATED CAP WITH PUP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6" -26" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #3
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
NOTE:
Description: IPS HDPE CROSS Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM CATALOG PAGE #4
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE A CLASS
2" 6.75 150
2" 6.75 200
3" 6.75 150
3" 6.75 200
4" 7.75 150
4" 7.75 200
5" 8.5 150
5" 8.5 200
6" 10.5 150
6" 10.5 200
8" 11.75 150
8" 11.75 200
10' 13.25 150
10" 13.25 200
12" 15.75 150
12" 15.75 200
14" 16.25 150
14" 16.25 200
16" 17.25 150
16" 17.25 200
18" 18.25 150
18" 18.25 200
20" 19.25 150
20" 19.25 200
22" 20.75 150
22" 20.75 200
24" 22 150
PAGE #5
HD26012FM200
HD26014FM150
HD26016FM200
HD26022FM200
HD26022FM150
HD26020FM200
HD26018FM200
HD2608FM200
HD26010FM150
HD26010FM200
HD26012FM150
HD26018FM150
HD26020FM150
HD26014FM200
HD26024FM150
HD26016FM150
HD2604FM200
HD2605FM150
HD2605FM200
HD2608FM150
406-777-7181 (F)
HD2606FM150
HD2606FM200
www.specfit.com
PART #
HD2602FM150
HD2602FM200
HD2603FM150
HD2603FM200
HD2604FM150
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F)
NOTE:
Description: IPS HDPE FABRICATED REDUCING Fittings are manufactured and tested to the requirements of ASTM D3035,
CROSS TEE (PLAIN-ENDS) D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #6
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)888-734-8258 (F)
SIZE 3X2 3X2 4X2 4X2 4X3 4X3 5X2 5X2 5X3 5X3 5X4 5X4
A 13.5 13.5 11 11 15.5 15.5 15 15 16 16 17 17
B 13 12 7.75 7.75 13.25 12.5 8.25 8.25 8.25 8.25 15.75 15.75
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD26032FM150 HD26032FM200 HD26042FM150 HD26042FM200 HD26043FM150 HD26043FM200 HD26052FM150 HD26052FM200 HD26053FM150 HD26053FM200 HD26054FM150 HD26054FM200
SIZE 6X2 6X2 6X3 6X3 6X4 6X4 6X5 6X5 8X2 8X2 8X3 8X3
A 15 15 16 16 17 17 21 21 16 16 17 17
B 8.75 8.75 8.75 8.75 9.25 9.25 18.25 18.25 9.75 9.75 9.75 9.75
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD26062FM150 HD26062FM200 HD26063FM150 HD26063FM200 HD26064FM150 HD26064FM200 HD26065FM150 HD26065FM200 HD26082FM150 HD26082FM200 HD26083FM150 HD26083FM200
SIZE 8X4 8X4 8X5 8X5 8X6 8X6 10X2 10X2 10X3 10X3 10X4 10X4
A 18 18 19 19 23.5 23.5 16 16 17 17 18 18
B 10.25 10.25 12.25 12.25 17.75 17.75 10.75 10.75 11 11 11.5 11.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD26084FM150 HD26084FM200 HD26085FM150 HD26085FM200 HD26086FM150 HD26086FM200 HD260102FM150 HD260102FM200 HD260103FM150 HD260103FM200 HD260104FM150 HD260104FM200
SIZE 10X5 10X5 10X6 10X6 10X8 10X8 12X2 12X2 12X3 12X3 12X4 12X4
A 19 19 20 20 26.75 26.75 19 19 20 20 21 21
B 13.5 13.5 13.5 13.5 25.5 25.5 12 12 12 12 12.5 12.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260105FM150 HD260105FM200 HD260106FM150 HD260106FM200 HD260108FM150 HD260108FM200 HD260122FM150 HD260122FM200 HD260123FM150 HD260123FM200 HD260124FM150 HD260124FM200
SIZE 12X5 12X5 12X6 12X6 12X8 12X8 12X10 12X10 14X2 14X2 14X3 14X3
A 22 22 23 23 25 25 31.75 31.75 19 19 20 20
B 14.5 14.5 14.5 14.5 15 15 26 26 12.5 12.5 12.5 12.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260125FM150 HD260125FM200 HD260126FM150 HD260126FM200 HD260128FM150 HD260128FM200 HD2601210FM150 HD2601210FM200 HD260142FM150 HD260142FM200 HD260143FM150 HD260143FM200
PAGE #7
888-734-8846 (T) 406-777-3466 (T)
IPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
[email protected] [email protected]
www.specfit.com
888-734-8258 (F) 406-777-7181 (F)
SIZE 14X4 14X4 14X5 14X5 14X6 14X6 14X8 14X8 14X10 14X10 14X12 14X12
A 21 21 22 22 23 23 25 25 33 33 33 33
B 13 13 15 15 15 15 15.5 15.5 38 38 38.5 38.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260144FM150 HD260144FM200 HD260145FM150 HD260145FM200 HD260146FM150 HD260146FM200 HD260148FM150 HD260148FM200 HD2601410FM150 HD2601410FM200 HD2601412FM150 HD2601412FM200
SIZE 16X2 16X2 16X3 16X3 16X4 16X4 16X5 16X5 16X6 16X6 16X8 16X8
A 19 19 20 20 21 21 22 22 23 23 25 25
B 13.5 13.5 13.5 13.5 14 14 16 16 16 16 16.5 16.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260162FM150 HD260162FM200 HD260163FM150 HD260163FM200 HD260164FM150 HD260164FM200 HD260165FM150 HD260165FM200 HD260166FM150 HD260166FM200 HD260168FM150 HD260168FM200
SIZE 16X10 16X10 16X12 16X12 16X14 16X14 18X2 18X2 18X3 18X3 18X4 18X4
A 28.75 28.75 35 35 35 35 19 19 20 20 21 21
B 16.5 16.5 32.25 32.25 31.25 31.25 14.5 14.5 14.5 14.5 15 15
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD2601610FM150 HD2601610FM200 HD2601612FM150 HD2601612FM200 HD2601614FM150 HD2601614FM200 HD260182FM150 HD260182FM200 HD260183FM150 HD260183FM200 HD260184FM150 HD260184FM200
SIZE 18X5 18X5 18X6 18X6 18X8 18X8 18X10 18X10 18X12 18X12 18X14 18X14
A 22 22 23 23 25 25 30.75 30.75 32.75 32.75 37 37
B 17 17 17 17 17.5 17.5 17.5 17.5 19 19 32 32
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260185FM150 HD260185FM200 HD260186FM150 HD260186FM200 HD260188FM150 HD260188FM200 HD2601810FM150 HD2601810FM200 HD2601812FM150 HD2601812FM200 HD2601814FM150 HD2601814FM200
SIZE 18X16 18X16 20X2 20X2 20X3 20X3 20X4 20X4 20X5 20X5 20X6 20X6
A 37 37 26 26 27.5 27.5 29 29 30 30 31 31
B 32.25 32.25 15.5 15.5 15.5 15.5 16 16 18 18 18 18
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD2601816FM150 HD2601816FM200 HD260202FM150 HD260202FM200 HD260203FM150 HD260203FM200 HD260204FM150 HD260204FM200 HD260205FM150 HD260205FM200 HD260206FM150 HD260206FM200
PAGE #8
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
IPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
SIZE 20X8 20X8 20X10 20X10 20X12 20X12 20X14 20X14 20X16 20X16 20X18 20X18
A 33.5 33.5 36 36 38 38 38.5 38.5 38.5 38.5 38.5 38.5
B 18.5 18.5 18.5 18.5 20 20 37.75 37.75 36 36 35.25 35.25
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260208FM150 HD260208FM200 HD2602010FM150 HD2602010FM200 HD2602012FM150 HD2602012FM200 HD2602014FM150 HD2602014FM200 HD2602016FM150 HD2602016FM200 HD2602018FM150 HD2602018FM200
SIZE 22X2 22X2 22X3 22X3 22X4 22X4 22X5 22X5 22X6 22X6 22X8 22X8
A 26 26 27.5 27.5 29 29 30 30 31 31 33.5 33.5
B 16.5 16.5 16.5 16.5 17 17 19 19 19 19 19.5 19.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260222FM150 HD260222FM200 HD260223FM150 HD260223FM200 HD260224FM150 HD260224FM200 HD260225FM150 HD260225FM200 HD260226FM150 HD260226FM200 HD260228FM150 HD260228FM200
SIZE 22X10 22X10 22X12 22X12 22X14 22X14 22X16 22X16 22X18 22X18 22X20 22X20
A 36 36 38 38 42 42 42 42 42 42 42 42
B 19.5 19.5 21 21 42.5 42.5 38.75 38.75 38 38 36.25 36.25
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD2602210FM150 HD2602210FM200 HD2602212FM150 HD2602212FM200 HD2602214FM150 HD2602214FM200 HD2602216FM150 HD2602216FM150 HD2602218FM150 HD2602218FM200 HD2602220FM150 HD2602220FM200
SIZE 24X2 24X2 24X3 24X3 24X4 24X4 24X5 24X5 24X6 24X6 24X8 24X8
A 26 26 27.5 27.5 29 29 30 30 31 31 33.5 33.5
B 17.5 17.5 17.5 17.5 18 18 20 20 20 20 20.5 20.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD260242FM150 HD260242FM200 HD260243FM150 HD260243FM200 HD260244FM150 HD260244FM200 HD260245FM150 HD260245FM200 HD260246FM150 HD260246FM200 HD260248FM150 HD260248FM200
SIZE 24X10 24X10 24X12 24X12 24X14 24X16 24X18 24X20 24X22
A 36 36 38 38 44 44 44 44 44
B 20.5 20.5 22 22 45.25 43.5 40.75 39 37.25
PRESSURE CLASS 150 200 150 200 150 150 150 150 150
PART # HD2602410FM150 HD2602410FM200 HD2602412FM150 HD2602412FM200 HD2602414FM150 HD2602416FM150 HD2602418FM150 HD2602420FM150 HD2602422FM150
PAGE #9
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
406-777-3466 (T)888-734-8846 (T)
SPECIFIED FITTINGS, INC164 W. SMITH RD
IPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
483 STEVENSVILLE AIRPORT RD.
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
www.specfit.com
TYPE A TYPE B
NOTE:
Description: IPS HDPE MOLDED Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELECTROFUSION COUPLINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #10
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T) 406-777-3466 (T)
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)
PRESSURE
PIPE SIZE d & d/2 D L TYPE CLASS PART #
2" IPS 2.375 3.15 4.21 A 150 MHD2452FM150
2" IPS 2.375 3.15 4.21 A 200 MHD2452FM200
3" IPS 3.5 4.53 5.91 A 150 MHD2453FM150
3" IPS 3.5 4.53 5.91 A 200 MHD2453FM200
4" IPS 4.5 5.59 6.69 A 150 MHD2454FM150
4" IPS 4.5 5.59 6.69 A 200 MHD2454FM200
5" IPS 5.563 7.09 6.73 A 150 MHD2455FM150
5" IPS 5.563 7.09 6.73 A 200 MHD2455FM200
6" IPS 6.625 8.07 7.28 B 150 MHD2456FM150
6" IPS 6.625 8.07 7.28 B 200 MHD2456FM200
8" IPS 8.625 10.83 8.03 B 150 MHD2458FM150
8" IPS 8.625 10.83 8.03 B 200 MHD2458FM200
10" IPS 10.75 13.58 8.66 B 150 MHD24510FM150
10" IPS 10.75 13.58 8.66 B 200 MHD24510FM200
12" IPS 12.75 17.52 9.06 B 150 MHD24512FM150
12" IPS 12.75 17.52 9.06 B 200 MHD24512FM200
14" IPS 14 19.49 10 B 150 MHD24514FM150
14" IPS 14 19.49 10 B 200 MHD24514FM200
16" IPS 16 21.81 11.81 B 150 MHD24516FM150
16" IPS 16 21.81 11.81 B 200 MHD24516FM200
18" IPS 18 24.21 12.6 B 150 MHD24518FM150
18" IPS 18 24.21 12.6 B 200 MHD24518FM200
20" IPS 20 27.17 14.41 B 150 MHD24520FM150
20" IPS 20 27.17 14.41 B 200 MHD24520FM200
22" IPS 22 29.72 15.75 B 150 MHD24522FM150
22" IPS 22 29.72 15.75 B 200 MHD24522FM200
24" IPS 24 29.72 15.75 B 150 MHD24524FM150
24" IPS 24 29.72 15.75 B 200 MHD24524FM200
PAGE #11
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
ELECTROFUSION COUPLINGS DIMENSION CHART
[email protected] [email protected]
www.specfit.com
406-777-7181 (F)
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F)
SPECIFIED FITTINGS, INC
PRESSURE
SIZE A B CLASS PART #
2" 2.45 3.2 150 MHD3502FM150
2" 2.45 3.2 200 MHD3502FM200
3" 3.1 5.38 150 MHD3503FM150
3" 3.1 5.38 200 MHD3503FM200
4" 3 4.93 150 MHD3504FM150
4" 3 5.38 200 MHD3504FM200
6" 4 6.38 150 MHD3506FM150
6" 4.25 7.12 200 MHD3506FM200
8" 6 10 150 MHD3508FM150
8" 6 10 200 MHD3508FM200
NOTE:
Description: IPS HDPE MOLDED 45 DEGREE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #12
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
PRESSURE
SIZE A B CLASS PART #
2" 2.88 5.06 150 MHD3702FM150
2" 2.88 5.06 200 MHD3702FM200
3" 3 5.63 150 MHD3703FM150
3" 3 6 200 MHD3703FM200
4" 3 6.75 150 MHD3704FM150
4" 3 6 200 MHD3704FM200
6" 4 8.25 150 MHD3706FM150
6' 4.25 8.63 200 MHD3706FM200
8' 6 11.81 150 MHD3708FM150
8' 6 11.81 200 MHD3708FM200
NOTE:
Description: IPS HDPE MOLDED 90 DEGREE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #13
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 5 HD3102FM150 HD3102FM200
3" 3.5 5 5.25 HD3103FM150 HD3103FM200
4" 4.5 6 6 HD3104FM150 HD3104FM200
5" 5.563 6 6.25 HD3105FM150 HD3105FM200
6" 6.625 6.75 7 HD3106FM150 HD3106FM200
8" 8.625 7.5 7.75 HD3108FM150 HD3108FM200
10" 10.75 7.5 8 HD31010FM150 HD31010FM200
12" 12.75 8 8.75 HD31012FM150 HD31012FM200
14" 14 9.25 10 HD31014FM150 HD31014FM200
16" 16 9.75 10.5 HD31016FM150 HD31016FM200
18" 18 10.5 11.5 HD31018FM150 HD31018FM200
20" 20 9.75 11.75 HD31020FM150 HD31020FM200
24" 24 11.25 12.5 HD31024FM150 HD31024FM200
NOTE:
Description: IPS HDPE 2 PC 11.25 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #14
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 5 HD3302FM150 HD3302FM200
3" 3.5 5 5.25 HD3303FM150 HD3303FM200
4" 4.5 5.75 6 HD3304FM150 HD3304FM200
5" 5.563 5.75 6.25 HD3305FM150 HD3305FM200
6" 6.625 6.5 7 HD3306FM150 HD3306FM200
8" 8.625 7 7.75 HD3308FM150 HD3308FM200
10" 10.75 7 8 HD33010FM150 HD33010FM200
12" 12.75 7.5 8.75 HD33012FM150 HD33012FM200
14" 14 8.5 10 HD33014FM150 HD33014FM200
16" 16 9 10.5 HD33016FM150 HD33016FM200
18" 18 9.75 11.5 HD33018FM150 HD33018FM200
20" 20 9.75 11.75 HD33020FM150 HD33020FM200
24" 24 10 12.5 HD33024FM150 HD33024FM200
NOTE:
Description: IPS HDPE 2 PC 22.5 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #15
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 5.25 HD3402FM150 HD3402FM200
3" 3.5 5 5.5 HD3403FM150 HD3403FM200
4" 4.5 5.75 6.25 HD3404FM150 HD3404FM200
5" 5.563 5.75 6.5 HD3405FM150 HD3405FM200
6" 6.625 6.5 7.5 HD3406FM150 HD3406FM200
8" 8.625 7.25 8.25 HD3408FM150 HD3408FM200
10" 10.75 7.25 8.75 HD34010FM150 HD34010FM200
12" 12.75 8 9.5 HD34012FM150 HD34012FM200
14" 14 9 10.75 HD34014FM150 HD34014FM200
16' 16 9.5 11.5 HD34016FM150 HD34016FM200
18' 18 9.5 11.75 HD34018FM150 HD34018FM200
20" 20 10.25 13 HD34020FM150 HD34020FM200
24" 20 10.75 14 HD34024FM150 HD34024FM200
NOTE:
Description: IPS HDPE 2 PC 30 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #16
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
SIZE OD A B CL/150 PART # CL/200 PART#
2" 2.375 4.75 5.25 HD3492FM150 HD3492FM200
3" 3.5 5 5.75 HD3493FM150 HD3493FM200
4" 4.5 5.75 6.5 HD3494FM150 HD3494FM200
5" 5.563 5.75 6.75 HD3495FM150 HD3495FM200
6" 6.625 6.5 7.75 HD3496FM150 HD3496FM200
8" 8.625 7 8.75 HD3498FM150 HD3498FM200
10" 10.75 7.25 9.5 HD34910FM150 HD34910FM200
12" 12.75 7.75 10.5 HD34912FM150 HD34912FM200
14" 14 8.75 11.75 HD34914FM150 HD34914FM200
16" 16 9.25 12.5 HD34916FM150 HD34916FM200
18" 18 10 13.75 HD34918FM150 HD34918FM200
20" 20 10 14.25 HD34920FM150 HD34920FM200
24" 24 10.5 15.5 HD34924FM150 HD34924FM200
NOTE:
Description: IPS HDPE 2 PC 45 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #17
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 4.75 5.5 HD3592FM150 HD3592FM200
3" 3.5 5 6 HD3593FM150 HD3593FM200
4" 4.5 5.75 7 HD3594FM150 HD3594FM200
5" 5.563 5.75 7.25 HD3595FM150 HD3595FM200
6" 6.625 6.5 8.5 HD3596FM150 HD3596FM200
8" 8.625 7 9.5 HD3598FM150 HD3598FM200
10" 10.75 7.25 10.25 HD35910FM150 HD35910FM200
12" 12.75 7.75 11.5 HD35912FM150 HD35912FM200
14" 14 8.75 12.75 HD35914FM150 HD35914FM200
16" 16 9.25 14 HD35916FM150 HD35916FM200
18" 18 10 15 HD35918FM150 HD35918FM200
20" 20 10 15.75 HD35920FM150 HD35920FM200
22" 22 10.5 16.75 HD35922FM150 HD35922FM200
24' 24 10.5 17.5 HD35924FM150 HD35924FM200
NOTE:
Description: IPS HDPE 2 PC. 60 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM CATALOG PAGE #18
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 12.75 HD3502FM150 HD3502FM200
3" 3.5 5 13.25 HD3503FM150 HD3503FM200
4" 4.5 5.75 14.75 HD3504FM150 HD3504FM200
5" 5.563 5.75 15.25 HD3505FM150 HD3505FM200
6" 6.625 6.5 16.75 HD3506FM150 HD3506FM200
8" 8.625 7 20.25 HD3508FM150 HD3508FM200
10" 10.75 7 21.5 HD35010FM150 HD35010FM200
12" 12.75 7.5 23.25 HD35012FM150 HD35012FM200
14" 14 8.5 26 HD35014FM150 HD35014FM200
16" 16 9 28 HD35016FM150 HD35016FM200
18" 18 9.75 30.75 HD35018FM150 HD35018FM200
20" 20 9.75 32 HD35020FM150 HD35020FM200
24" 24 10 36 HD35024FM150 HD35024FM200
NOTE:
Description: IPS HDPE 3 PC 45 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #19
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 11.75 HD3602FM150 HD3602FM200
3" 3.5 5 12.25 HD3603FM150 HD3603FM200
4" 4.5 5.75 13.75 HD3604FM150 HD3604FM200
5" 5.563 5.75 14.25 HD3605FM150 HD3605FM200
6" 6.625 6.5 16 HD3606FM150 HD3606FM200
8" 8.625 7.25 19.5 HD3608FM150 HD3608FM200
10" 10.75 7.25 21 HD36010FM150 HD36010FM200
12" 12.75 8 23 HD36012FM150 HD36012FM200
14" 14 9 25.5 HD36014FM150 HD36014FM200
16" 16 9.5 27.5 HD36016FM150 HD36016FM200
18" 18 9.5 29.25 HD36018FM150 HD36018FM200
20" 20 10.25 32.75 HD36020FM150 HD36020FM200
24" 24 10.75 36 HD36024FM150 HD36024FM200
NOTE:
Description: IPS HDPE 3 PC 60 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #20
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 4.75 8.75 HD3692FM150 HD3692FM200
3" 3.5 5 9.5 HD3693FM150 HD3693FM200
4" 4.5 5.75 10.5 HD3694FM150 HD3694FM200
5" 5.563 5.75 11.25 HD3695FM150 HD3695FM200
6" 6.625 6.5 12.5 HD3696FM150 HD3696FM200
8" 8.625 7 15.5 HD3698FM150 HD3698FM200
10" 10.75 7.25 17 HD36910FM150 HD36910FM200
12" 12.75 7.75 18.75 HD36912FM150 HD36912FM200
14" 14 8.75 20.75 HD36914FM150 HD36914FM200
16" 16 9.25 22.5 HD36916FM150 HD36916FM200
18" 18 10 25 HD36918FM150 HD36918FM200
20' 20 10 26.5 HD36920FM150 HD36920FM200
24" 24 10.5 30.25 HD36924FM150 HD36924FM200
NOTE:
Description: IPS HDPE 3 PC 90 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #21
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
SIZE OD A B CL/150 PART # CL/200 PART #
2" 2.375 5 13.5 HD3702FM150 HD3702FM200
3" 3.5 5 14.25 HD3703FM150 HD3703FM200
4" 4.5 5.75 15.5 HD3704FM150 HD3704FM200
5" 5.563 5.75 16 HD3705FM150 HD3705FM200
6" 6.625 6.5 17.25 HD3706FM150 HD3706FM200
8" 8.625 7 23 HD3708FM150 HD3708FM200
10" 10.75 7 25 HD37010FM150 HD37010FM200
12" 12.75 7.5 27 HD37012FM150 HD37012FM200
14" 14 8.5 29.75 HD37014FM150 HD37014FM200
16" 16 9 32.25 HD37016FM150 HD37016FM200
18" 18 9.75 35.75 HD37018FM150 HD37018FM200
20" 20 9.75 37.75 HD37020FM150 HD37020FM200
24" 24 10 44.25 HD37024FM150 HD37024FM200
NOTE:
Description: IPS HDPE 5 PC 90 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #22
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
2" 6.125 0.3 3.75 150 MHD5202FM150 12" 9.125 2.1 15.125 200 MHD52012FM200
2" 6 0.4 3.75 200 MHD5202FM200 14" 11.5 1.5 17.375 150 MHD52014FM150
3" 6.125 0.4 4.625 150 MHD5203FM150 14" 12 2.3 17.375 200 MHD52014FM200
3" 6 0.6 4.75 200 MHD5203FM200 16" 11.5 1.7 20 150 MHD52016FM150
4" 7.125 0.5 6.125 150 MHD5204FM150 16" 12 2.6 20 200 MHD52016FM200
4" 6 0.8 6.625 200 MHD5204FM200 18" 11.5 1.9 20.625 150 MHD52018FM150
6" 8 0.7 8.125 150 MHD5206FM150 18" 12 2.5 21.12 200 MHD52018FM200
6" 8.125 1.1 8.625 200 MHD5206FM200 20" 12 2.3 23.5 150 MHD52020FM150
8" 11 0.9 10.75 150 MHD5208FM150 20" 12 2.78 23.5 200 MHD52020FM200
8" 8.625 1.4 10.75 200 MHD5208FM200 22" 12 2.5 25.6 150 MHD52022FM150
10" 12 1.1 13 150 MHD52010FM150 22" 12 3.06 25.6 200 MHD52022FM200
10" 8.75 1.7 13 200 MHD52010FM200 24" 14 2.9 27.9 150 MHD52024FM150
12" 12 1.3 15.5 150 MHD52012FM150 24" 14 3.33 28 200 MHD52024FM200
Description: IPS HDPE MOLDED FLANGE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ADAPTER PLAIN-END D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #23
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
NOTE:
Description: IPS 316 STAINLESS STEEL Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: 316 STAINLESS STEEL requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS: 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #24
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
IPS 316 STAINLESS STEEL FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS PART #
2" 6 0.75 2.46 4 0.75 4.75 0.27 150/200 BR2FM2006SS
3" 7.5 0.94 3.6 4 0.75 6 0.33 150/200 BR3FM2006SS
4" 9 0.94 4.6 8 0.75 7.5 0.39 150/200 BR4FM2006SS
6" 11 1 6.75 8 0.875 9.5 0.44 150/200 BR6FM2006SS
8" 13.5 1.12 8.75 8 0.875 11.75 0.44 150/200 BR8FM2006SS
10" 16 1.27 10.92 12 1 14.25 0.5 150/200 BR10FM2006SS
12" 19 1.77 12.92 12 1 17 0.5 150/200 BR12FM2006SS
14" 21 1.61 14.18 12 1.125 18.75 0.43 150 BR14FM1506SS
14" 21 1.78 14.18 12 1.125 18.75 0.41 200 BR14FM2006SS
16" 23.5 1.89 16.19 16 1.125 21.25 0.43 150 BR16FM1506SS
16" 23.5 2.17 16.19 16 1.125 21.25 0.4 200 BR16FM2006SS
18" 25 1.56 18.2 16 1.25 22.75 0.5 150 BR18FM1506SS
18" 25 2.06 18.2 16 1.25 22.75 0.4 200 BR18FM2006SS
20" 27.5 2.15 20.25 20 1.25 25 0.43 150 BR20FM2006SS
20" 27.5 2.27 20.25 20 1.25 25 0.31 200 BR20FM2006SS
22" 29.5 2.25 22.25 20 1.375 27.25 0.43 150 BR22FM1506SS
22" 29.5 2.43 22.25 20 1.375 27.25 0.31 200 BR22FM2006SS
24" 32 2.5 24.25 20 1.375 29.5 0.43 150 BR24FM1506SS
24" 32 2.6 24.25 20 1.375 29.5 0.31 200 BR24FM2006SS
PAGE #25
[email protected] [email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8258 (F) 406-777-7181 (F)
888-734-8846 (T) 406-777-3466 (T)
NOTE:
Description: IPS EPOXY COATED DUCTILE IRON Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: DUCTILE IRON requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #26
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
IPS EPOXY COATED DUCTILE IRON FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS PART #
2" 6 0.75 2.46 4 0.75 4.75 0.31 150/200 BR2FM200
3" 7.5 0.94 3.6 4 0.75 6 0.4 150/200 BR3FM200
4" 9 0.94 4.6 8 0.75 7.5 0.4 150/200 BR4FM200
5" 10 0.94 5.69 8 0.875 8.5 0.44 150/200 BR5FM200
6" 11 1 6.75 8 0.875 9.5 0.4 150/200 BR6FM200
8" 13.5 1.12 8.75 8 0.875 11.75 0.4 150/200 BR8FM200
10" 16 1.19 10.92 12 1 14.25 0.4 150/200 BR10FM200
12" 19 1.5 12.92 12 1 17 0.4 150/200 BR12FM200
14" 21 1.38 14.38 12 1.125 18.75 0.31 150 BR14FM150
14" 21 1.63 14.18 12 1.125 18.75 0.4 200 BR14FM200
16" 23.5 1.65 16.38 16 1.125 21.25 0.35 150 BR16FM150
16" 23.5 1.88 16.19 16 1.125 21.25 0.4 200 BR16FM200
18" 25 1.67 18.38 16 1.25 22.75 0.35 150 BR18FM150
18" 25 1.75 18.2 16 1.25 22.75 0.4 200 BR18FM200
20" 27.5 1.81 20.375 20 1.25 25 0.4 150 BR20FM150
20" 27.5 2.125 20.375 20 1.25 25 0.31 200 BR20FM200
22" 29.5 2 22.375 20 1.375 27.25 0.37 150 BR22FM150
22" 29.5 2.3 22.3.75 20 1.375 27.25 0.31 200 BR22FM200
24" 32 2.17 24.375 20 1.375 29.5 0.4 150 BR24FM150
24" 32 2.5 24.375 20 1.375 29.5 0.31 200 BR24FM200
PAGE #27
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
NOTE:
Description: IPS PRIMER COATED DUCTILE IRON Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: DUCTILE IRON requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #28
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)888-734-8258 (F)
IPS PRIMER COATED DUCTILE IRON FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS PART #
2" 6 0.75 2.46 4 0.75 4.75 0.31 150/200 BR2FM200P
3" 7.5 0.94 3.6 4 0.75 6 0.4 150/200 BR3FM200P
4" 9 0.94 4.6 8 0.75 7.5 0.4 150/200 BR4FM200P
5" 10 0.94 5.69 8 0.875 8.5 0.44 150/200 BR5FM200P
6" 11 1 6.75 8 0.875 9.5 0.4 150/200 BR6FM200P
8" 13.5 1.12 8.75 8 0.875 11.75 0.4 150/200 BR8FM200P
10" 16 1.19 10.92 12 1 14.25 0.4 150/200 BR10FM200P
12" 19 1.5 12.92 12 1 17 0.4 150/200 BR12FM200P
14" 21 1.38 14.38 12 1.125 18.75 0.31 150 BR14FM150P
14" 21 1.63 14.18 12 1.125 18.75 0.4 200 BR14FM200P
16" 23.5 1.65 16.38 16 1.125 21.25 0.35 150 BR16FM150P
16" 23.5 1.88 16.19 16 1.125 21.25 0.4 200 BR16FM200P
18" 25 1.67 18.38 16 1.25 22.75 0.35 150 BR18FM150P
18" 25 1.75 18.2 16 1.25 22.75 0.4 200 BR18FM200P
20" 27.5 1.81 20.375 20 1.25 25 0.4 150 BR20FM150P
20" 27.5 2.125 20.375 20 1.25 25 0.31 200 BR20FM200P
22" 29.5 2 22.375 20 1.375 27.25 0.37 150 BR22FM150P
22" 29.5 2.3 22.375 20 1.375 27.25 0.31 200 BR22FM200P
24" 32 2.17 24.375 20 1.375 29.5 0.4 150 BR24FM150P
24" 32 2.5 24.375 20 1.375 29.5 0.31 200 BR24FM200P
PAGE #29
483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
PRESSURE
SIZE OD L CLASS PART #
3" 3.5" 10.25 150 MHD5483FM150
3" 3.5" 10.25 200 MHD5483FM200
4" 4.5" 10.25 150 MHD5484FM150
4" 4.5" 10.25 200 MHD5484FM200
6" 6.625" 11.25 150 MHD5486FM150
6" 6.625" 11.25 200 MHD5486FM200
8" 8.625" 12.75 150 MHD5488FM150
8" 8.625" 12.75 200 MHD5488FM200
10" 10.75" 13.75 150 MHD54810FM150
10" 10.75" 13.75 200 MHD54810FM200
12" 12.75" 14.75 150 MHD54812FM150
12" 12.75" 14.75 200 MHD54812FM200
14" 14" 13.5 150 MHD54814FM150
14" 14" 13.5 200 MHD54814FM200
16" 16" 14.5 150 MHD54816FM150
16" 16" 14.5 200 MHD54816FM200
18" 18" 16 150 MHD54818FM150
18" 18" 16 200 MHD54818FM200
20" 20" 16.5 150 MHD54820FM150
20" 20" 16.5 200 MHD54820FM200
24" 24" 18 150 MHD54824FM150
24" 24" 18 200 MHD54824FM200
NOTE:
Description: IPS HDPE MJ ADAPTER Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #30
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
PRESSURE
SIZE A B L CLASS PART #
8X6 4.37 4.5 11.62 150 MHD60086FM150
8X6 4.37 4.5 11.62 200 MHD60086FM200
6X4 4.12 4.12 11.5 150 MHD60064FM150
6X4 3 3 8 200 MHD60064FM200
4X3 3.12 3 7.88 150 MHD60043FM150
4X3 3 3 6.88 200 MHD60043FM200
4X2 3.06 2.81 7.75 150 MHD60042FM150
4X2 3 2.88 7.38 200 MHD60042FM200
3X2 3.12 2.81 8 150 MHD60032FM150
3X2 2.94 3 6.88 200 MHD60032FM200
Description: IPS HDPE MOLDED NOTE:
CONCENTRIC REDUCERS Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #31
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
NOTE:
Description: IPS HDPE FABRICATED CONCENTRIC Fittings are manufactured and tested to the requirements of ASTM D3035,
REDUCERS (PLAIN-ENDS) D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3" - 26" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #32
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
IPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
3X2 2.75 3 8 150 HDS60032FM150 8X6 4.5 4.25 11.5 150 HDS60086FM150
3X2 3 3 7 200 HDS60032FM200 8X6 4.5 4.25 11.5 200 HDS60086FM200
4X2 2.75 3 7.75 150 HDS60042FM150 10X2 2.75 7.5 23.75 150 HDS600102FM150
4X2 3 3 7.5 200 HDS60042FM200 10X2 3 7.5 22 200 HDS600102FM200
4X3 3 3 8 150 HDS60043FM150 10X3 3 7.5 23.75 150 HDS600103FM150
4X3 3 3 7 200 HDS60043FM200 10X3 3 7.5 21.5 200 HDS600103FM200
5X2 4.25 6.75 13 150 HDS60052FM150 10X4 4 7.5 20.5 150 HDS600104FM150
5X2 4.25 6.75 13 200 HDS60052FM200 10X4 3 7.5 20.5 200 HDS600104FM200
5X3 4.25 6.75 13 150 HDS60053FM150 10X5 6.75 7.5 21.75 150 HDS600105FM150
5X3 4.25 6.75 13 200 HDS60053FM200 10X5 6.75 7.5 21.75 200 HDS600105FM200
5X4 4.75 7 13.75 150 HDS60054FM150 10X6 6.75 7.5 18.75 150 HDS600106FM150
5X4 4.75 7 13.75 200 HDS60054FM200 10X6 6.75 7.5 18.75 200 HDS600106FM200
6X2 2.75 4 14 150 HDS60062FM150 10X8 7.25 7.5 17.5 150 HDS600108FM150
6X2 3 3 11.5 200 HDS60062FM200 10X8 7.25 7.5 17.5 200 HDS600108FM200
6X3 3 4 14.25 150 HDS60063FM150 12X2 2.75 11 32.5 150 HDS600122FM150
6X3 3 3 11 200 HDS60063FM200 12X2 3 11 31 200 HDS600122FM200
6X4 4 4 11.5 150 HDS60064FM150 12X3 3 11 32.5 150 HDS600123FM150
6X4 3 3 8 200 HDS60064FM200 12X3 3 11 30.5 200 HDS600123FM200
6X5 6.75 7 15.75 150 HDS60065FM150 12X4 4 11 28.25 150 HDS600124FM150
6X5 6.75 7 15.75 200 HDS60065FM200 12X4 3 11 26 200 HDS600124FM200
8X2 2.75 7.5 21.75 150 HDS60082FM150 12X5 6.75 11 27 150 HDS600125FM150
8X2 3 7.5 21.75 200 HDS60082FM200 12X5 6.75 11 27 200 HDS600125FM200
8X3 3 7.5 22 150 HDS60083FM150 12X6 6.75 11 26 150 HDS600126FM150
8X3 3 7.5 19.75 200 HDS60083FM200 12X6 6.75 11 26 200 HDS600126FM200
8X4 4 7.5 18.5 150 HDS60084FM150 12X8 7.25 11 22.75 150 HDS600128FM150
8X4 3 7.5 16.25 200 HDS60084FM200 12X8 7.25 11 22.75 200 HDS600128FM200
8X5 6.75 7.5 18 150 HDS60085FM150 12X10 7 11 20.75 150 HDS6001210FM150
8X5 6.75 7.5 18 200 HDS60085FM200 12X10 7 11 20.75 200 HDS6001210FM200
PAGE #33
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
www.specfit.com
IPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
14X2 2.75 11 35.5 150 HDS600142FM150 16X10 7 11 23.5 150 HDS6001610FM150
14X2 3 11 34 200 HDS600142FM200 16X10 7 11 23.5 200 HDS6001610FM200
14X3 3 11 35.5 150 HDS600143FM150 16X12 8.5 11 23.25 150 HDS6001612FM150
14X3 3 11 33.5 200 HDS600143FM200 16X12 8.5 11 23.25 200 HDS6001612FM200
14X4 4 11 31.25 150 HDS600144FM150 16X14 8.5 11 22.25 150 HDS6001614FM150
14X4 3 11 29 200 HDS600144FM200 16X14 8.5 11 22.25 200 HDS6001614FM200
14X5 6.75 11 32.5 150 HDS600145FM150 18X2 2.75 12 43.5 150 HDS600182FM150
14X5 6.75 11 32.5 200 HDS600145FM200 18X2 3 12 42 200 HDS600182FM200
14X6 6.75 11 27.25 150 HDS600146FM150 18X3 3 12 43.5 150 HDS600183FM150
14X6 6.75 11 27.25 200 HDS600146FM200 18X3 3 12 41.5 200 HDS600183FM200
14X8 7.25 11 26 150 HDS600148FM150 18X4 4 12 39.25 150 HDS600184FM150
14X8 7.25 11 26 200 HDS600148FM200 18X4 3 12 37 200 HDS600184FM200
14X10 7.5 11 21.75 150 HDS6001410FM150 18X5 6.75 12 37 150 HDS600185FM150
14X10 7.5 11 21.75 200 HDS6001410FM200 18X5 6.75 12 37 200 HDS600185FM200
14X12 8.5 11 21.5 150 HDS6001412FM150 18X6 6.75 12 36 150 HDS600186FM150
14X12 8.5 11 21.5 200 HDS6001412FM200 18X6 6.75 12 36 200 HDS600186FM200
16X2 2.75 11 37.25 150 HDS600162FM150 18X8 7.25 12 30.25 150 HDS600188FM150
16X2 3 11 35.5 200 HDS600162FM200 18X8 7.25 12 30.25 200 HDS600188FM200
16X3 3 11 37.25 150 HDS600163FM150 18X10 7 12 28.25 150 HDS6001810FM150
16X3 3 11 35 200 HDS600163FM200 18X10 7 12 28.25 200 HDS6001810FM200
16X4 4 11 33 150 HDS600164FM150 18X12 8.5 12 26 150 HDS6001812FM150
16X4 3 11 30.5 200 HDS600164FM200 18X12 8.5 12 26 200 HDS6001812FM200
16X5 6.75 11 34.25 150 HDS600165FM150 18X14 8.5 12 25 150 HDS6001814FM150
16X5 6.75 11 34.25 200 HDS600165FM200 18X14 8.5 12 25 200 HDS6001814FM200
16X6 6.625 11 32.25 150 HDS600166FM150 18x16 8.5 12 23.25 150 HDS6001816FM150
16X6 6.625 11 32.25 200 HDS600166FM200 18X16 8.5 12 23.25 200 HDS6001816FM200
16X8 7.25 11 31.25 150 HDS600168FM150 20X2 2.75 12 47.25 150 HDS600202FM150
16X8 7.25 11 31.25 200 HDS600168FM200 20X2 3 12 45.5 200 HDS600202FM200
PAGE #34
406-777-3466 (T)
SPECIFIED FITTINGS, INC
www.specfit.com
164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T)
888-734-8258 (F) 406-777-7181 (F)
IPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
20X3 3 12 47.25 150 HDS600203FM150 22X6 6.75 12 44 150 HDS600226FM150
20X3 3 12 45 200 HDS600203FM200 22X6 6.75 12 44 200 HDS600226FM200
20X4 4 12 43 150 HDS600204FM150 22X8 7.25 12 38.25 150 HDS600228FM150
20X4 3 12 40.5 200 HDS600204FM200 22X8 7.25 12 38.25 200 HDS600228FM200
20X5 6.75 12 44.25 150 HDS600205FM150 22X10 7.5 12 31.75 150 HDS6002210FM150
20X5 6.75 12 44.25 200 HDS600205FM200 22X10 7.5 12 31.75 200 HDS6002210FM200
20X6 6.75 12 38.75 150 HDS600206FM150 22X12 8.5 12 31.5 150 HDS6002212FM150
20X6 6.75 12 38.75 200 HDS600206FM200 22X12 8.5 12 31.5 200 HDS6002212FM200
20X8 7.25 12 36.5 150 HDS600208FM150 22X14 8.5 12 30.5 150 HDS6002214FM150
20X8 7.25 12 36.5 200 HDS600208FM200 22X14 8.5 12 30.5 200 HDS6002214FM200
20X10 7.5 12 30 150 HDS6002010FM150 22X16 8.5 12 26.75 150 HDS6002216FM150
20X10 7.5 12 30 200 HDS6002010FM200 22X16 8.5 12 26.75 200 HDS6002216FM200
20X12 8.5 12 29.75 150 HDS6002012FM150 22X18 9.5 12 26 150 HDS6002218FM150
20X12 8.5 12 29.75 200 HDS6002012FM200 22X18 9.5 12 26 200 HDS6002218FM200
20X14 8.5 12 26.75 150 HDS6002014FM150 22X20 9.5 12 24.25 150 HDS6002220FM150
20X14 8.5 12 26.75 200 HDS6002014FM200 22X20 9.5 12 24.25 200 HDS6002220FM200
20X16 8.5 12 25 150 HDS6002016FM150 24X2 2.75 12 54.25 150 HDS600242FM150
20X16 8.5 12 25 200 HDS6002016FM200 24X2 3 12 52.75 200 HDS600242FM200
20X18 9.5 12 24.25 150 HDS6002018FM150 24X3 3 12 54.25 150 HDS600243FM150
20X18 9.5 12 24.25 200 HDS6002018FM200 24X3 3 12 52.25 200 HDS600243FM200
22X2 2.75 12 49 150 HDS600222FM150 24X4 4 12 50 150 HDS600244FM150
22X2 3 12 47.25 200 HDS600222FM200 24X4 3 12 47.75 200 HDS600244FM200
22X3 3 12 49 150 HDS600223FM150 24X5 6.75 12 47.75 150 HDS600245FM150
22X3 3 12 46.75 200 HDS600223FM200 24X5 6.75 12 47.75 200 HDS600245FM200
22X4 4 12 44.75 150 HDS600224FM150 24X6 6.75 12 46.75 150 HDS600246FM150
22X4 3 12 42.25 200 HDS600224FM200 24X6 6.75 12 46.75 200 HDS600246FM200
22X5 6.75 12 46 150 HDS600225FM150 24X8 7.25 12 40 150 HDS600248FM150
22X5 6.75 12 46 200 HDS600225FM200 24X8 7.25 12 40 200 HDS600248FM200
PAGE #35
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
IPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
24X10 7.5 12 38 150 HDS6002410FM150 26X12 8.5 16 45.5 150 HDS6002612FM150
24X10 7.5 12 38 200 HDS6002410FM200 26X12 8.5 16 45.5 200 HDS6002612FM200
24X12 8.5 12 33.25 150 HDS6002412FM150 26X14 8.5 16 38 150 HDS6002614FM150
24X12 8.5 12 33.25 200 HDS6002412FM200 26X14 8.5 16 38 200 HDS6002614FM200
24X14 8.5 12 32.25 150 HDS6002414FM150 26X16 8.5 16 36.25 150 HDS6002616FM150
24X14 8.5 12 32.25 200 HDS6002414FM200 26X16 8.5 16 36.25 200 HDS6002616FM200
24X16 8.5 12 30.5 150 HDS6002416FM150 26X18 9.5 16 35.5 150 HDS6002618FM150
24X16 8.5 12 30.5 200 HDS6002416FM200 26X18 9.5 16 35.5 200 HDS6002618FM200
24X18 9.5 12 27.75 150 HDS6002418FM150 26X20 9.5 16 31.75 150 HDS6002620FM150
24X18 9.5 12 27.75 200 HDS6002418FM200 26X20 9.5 16 31.75 200 HDS6002620FM200
24X20 9.5 12 26 150 HDS6002420FM150 26X22 9.5 16 30 150 HDS6002622FM150
24X20 9.5 12 26 200 HDS6002420FM200 26X22 9.5 16 30 200 HDS6002622FM200
24X22 9.5 12 24.25 150 HDS6002422FM150 26X24 9.5 16 28.25 150 HDS6002624FM150
24X22 9.5 12 24.25 200 HDS6002422FM200 26X24 9.5 16 28.25 200 HDS6002624FM200
26X2 2.75 16 63.75 150 HDS600262FM150
26X2 3 16 63.5 200 HDS600262FM200
26X3 3 16 64 150 HDS600263FM150
26X3 3 16 64 200 HDS600263FM200
26X4 4 16 59.75 150 HDS600264FM150
26X4 3 16 57.25 200 HDS600264FM200
26X5 6.625 16 61 150 HDS600265FM150
26X5 6.625 16 61 200 HDS600265FM200
26X6 6.625 16 54.5 150 HDS600266FM150
26X6 6.625 16 54.5 200 HDS600266FM200
26X8 7.125 16 53.25 150 HDS600268FM150
26X8 7.125 16 53.25 200 HDS600268FM200
26X10 7 16 45.75 150 HDS6002610FM150
26X10 7 16 45.75 200 HDS6002610FM200
PAGE #36
www.specfit.com
164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
406-777-3466 (T)
SPECIFIED FITTINGS, INC
CL/150 CL/200
SIZE OD A B R PART # PART #
2" 2.375 6 7.9 7.13 HD7832FM150 HD7832FM200
3" 3.5 6 8.8 10.5 HD7833FM150 HD7833FM200
4" 4.5 6 9.6 13.5 HD7834FM150 HD7834FM200
6" 6.625 7 12.3 19.9 HD7836FM150 HD7836FM200
8" 8.625 10 16.6 24.5 HD7838FM150 HD7838FM200
10" 10.75 11 19.6 32.25 HD78310FM150 HD78310FM200
12" 12.75 13 23.3 38.3 HD78312FM150 HD78312FM200
14" 14 13 23.4 38.9 HD78314FM150 HD78314FM200
NOTE:
Description: IPS HDPE 30 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #37
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
CL/150 CL/200
SIZE OD A B R PART # PART #
2" 2.375 6 9 7.13 HD7842FM150 HD7842FM200
3" 3.5 6 10.3 10.5 HD7843FM150 HD7843FM200
4" 4.5 6 11.6 13.5 HD7844FM150 HD7844FM200
6" 6.625 7 15.2 19.9 HD7846FM150 HD7846FM200
8" 8.625 10 20.1 24.5 HD7848FM150 HD7848FM200
10" 10.75 11 24.4 32.25 HD78410FM150 HD78410FM200
12" 12.75 13 28.9 38.3 HD78412FM150 HD78412FM200
14" 14 13 29.1 38.9 HD78414FM150 HD78414FM200
NOTE:
Description: IPS HDPE 45 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #38
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
CL/150 CL/200
SIZE OD A B R PART # PART #
2" 2.375 6 10.1 7.13 HD7852FM150 HD7852FM200
3" 3.5 6 12.1 10.5 HD7853FM150 HD7853FM200
4" 4.5 6 13.8 13.5 HD7854FM150 HD7854FM200
6" 6.625 7 18.5 19.9 HD7856FM150 HD7856FM200
8" 8.625 10 24.1 24.5 HD7858FM150 HD7858FM200
10" 10.75 11 29.6 32.25 HD78510FM150 HD78510FM200
12" 12.75 13 35.1 38.3 HD78512FM150 HD78512FM200
14" 14 13 35.5 38.9 HD78514FM150 HD78514FM200
NOTE:
Description: IPS HDPE 60 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #39
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
CL/150 CL/200
SIZE OD A B R PART # PART #
2" 2.375 4.5 14 9.5 HD7862FM150 HD7862FM200
3" 3.5 4.5 18.5 14 HD7863FM150 HD7863FM200
4" 4.5 5 23 18 HD7864FM150 HD7864FM200
6" 6.625 7 26.9 19.9 HD7866FM150 HD7866FM200
8" 8.625 10 34.5 24.5 HD7868FM150 HD7868FM200
10" 10.75 11 43.25 32.25 HD78610FM150 HD78610FM200
12" 12.75 13 51.3 38.3 HD78612FM150 HD78612FM200
14" 14 13 51.9 38.9 HD78614FM150 HD78614FM200
NOTE:
Description: IPS HDPE 90 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #40
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
PRESSURE
SIZE A B L CLASS PART #
2" 2.88 5.13 10.25 150 MHD8202FM150
2" 2.88 5.13 10.25 200 MHD8202FM200
3" 3 5.72 11.44 150 MHD8203FM150
3" 3 6.06 12.13 200 MHD8203FM200
4" 3 6.75 13.5 150 MHD8204FM150
4" 3 6.22 12.44 200 MHD8204FM200
6" 4.06 8.31 16.62 150 MHD8206FM150
6" 4.25 8.63 17.25 200 MHD8206FM200
8" 6 12.09 24.18 150 MHD8208FM150
8' 6 12.09 24.18 200 MHD8208FM200
NOTE:
Description: IPS HDPE MOLDED TEES Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #41
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
CL/150 CL/200
SIZE OD A B PART # PART #
3" 3.5 13.5 6.75 HD8203FM150 HD8203FM200
4" 4.5 15.5 7.75 HD8204FM150 HD8204FM200
5" 5.563 17 8.5 HD8205FM150 HD8205FM200
6" 6.625 21 10.5 HD8206FM150 HD8206FM200
8" 8.625 23.5 11.75 HD8208FM150 HD8208FM200
10" 10.75 26.25 13.25 HD82010FM150 HD82010FM200
12" 12.75 31.25 15.75 HD82012FM150 HD82012FM200
14" 14 32.5 16.25 HD82014FM150 HD82014FM200
16" 16 34.5 17.25 HD82016FM150 HD82016FM200
18" 18 36.5 18.25 HD82018FM150 HD82018FM200
20" 20 38.5 19.25 HD82020FM150 HD82020FM200
24" 24 44 22 HD82024FM150
24" 24 56 28 HD82024FM200
NOTE:
Description: IPS HDPE FABRICATED TEE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #42
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
NOTE:
Description: IPS HDPE FABRICATED REDUCING TEE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 3"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #43
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
IPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
SIZE 3X2 3X2 4X2 4X2 4X3 4X3 5X2 5X2 5X3 5X3 5X4 5X4
A 13.5 13.5 11 11 15.5 15.5 15 15 16 16 17 17
B 13 12 7.75 7.75 13.25 12.5 8.25 8.25 8.25 8.25 15.75 15.75
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD82032FM150 HD82032FM200 HD82042FM150 HD82042FM200 HD82043FM150 HD82043FM200 HD82052FM150 HD82052FM200 HD82053FM150 HD82053FM200 HD82054FM150 HD82054FM200
SIZE 6X2 6X2 6X3 6X3 6X4 6X4 6X5 6X5 8X2 8X2 8X3 8X3
A 15 15 16 16 17 17 21 21 16 16 17 17
B 8.75 8.75 8.75 8.75 9.25 9.25 18.25 18.25 9.75 9.75 9.75 9.75
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD82062FM150 HD82062FM200 HD82063FM150 HD82063FM200 HD82064FM150 HD82064FM200 HD82065FM150 HD82065FM200 HD82082FM150 HD82082FM200 HD82083FM150 HD82083FM200
SIZE 8X4 8X4 8X5 8X5 8X6 8X6 10X2 10X2 10X3 10X3 10X4 10X4
A 18 18 19 19 23.5 23.5 16 16 17 17 18 18
B 10.25 10.25 12.25 12.25 17.75 17.75 10.75 10.75 11 11 11.5 11.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD82084FM150 HD82084FM200 HD82085FM150 HD82085FM200 HD82086FM150 HD82086FM200 HD820102FM150 HD820102FM200 HD820103FM150 HD820103FM200 HD820104FM150 HD820104FM200
SIZE 10X5 10X5 10X6 10X6 10X8 10X8 12X2 12X2 12X3 12X3 12X4 12X4
A 19 19 20 20 26.75 26.75 19 19 20 20 21 21
B 13.5 13.5 13.5 13.5 25.5 25.5 12 12 12 12 12.5 12.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820105FM150 HD820105FM200 HD820106FM150 HD820106FM200 HD820108FM150 HD820108FM200 HD820122FM150 HD820122FM200 HD820123FM150 HD820123FM200 HD820124FM150 HD820124FM200
SIZE 12X5 12X5 12X6 12X6 12X8 12X8 12X10 12X10 14X2 14X2 14X3 14X3
A 22 22 23 23 25 25 31.75 31.75 19 19 20 20
B 14.5 14.5 14.5 14.5 15 15 26 26 12.5 12.5 12.5 12.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820125FM150 HD820125FM200 HD820126FM150 HD820126FM200 HD820128FM150 HD820128FM200 HD8201210FM150 HD8201210FM200 HD820142FM150 HD820142FM200 HD820143FM150 HD820143FM200
PAGE #44
[email protected] [email protected]
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
IPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
SIZE 14X4 14X4 14X5 14X5 14X6 14X6 14X8 14X8 14X10 14X10 14X12 14X12
A 21 21 22 22 23 23 25 25 33 33 33 33
B 13 13 15 15 15 15 15.5 15.5 38 38 38.5 38.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820144FM150 HD820144FM200 HD820145FM150 HD820145FM200 HD820146FM150 HD820146FM200 HD820148FM150 HD820148FM200 HD8201410FM150 HD8201410FM200 HD8201412FM150 HD8201412FM200
SIZE 16X2 16X2 16X3 16X3 16X4 16X4 16X5 16X5 16X6 16X6 16X8 16X8
A 19 19 20 20 21 21 22 22 23 23 25 25
B 13.5 13.5 13.5 13.5 14 14 16 16 16 16 16.5 16.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820162FM150 HD820162FM200 HD820163FM150 HD820163FM200 HD820164FM150 HD820164FM200 HD820165FM150 HD820165FM200 HD820166FM150 HD820166FM200 HD820168FM150 HD820168FM200
SIZE 16X10 16X10 16X12 16X12 16X14 16X14 18X2 18X2 18X3 18X3 18X4 18X4
A 28.75 28.75 35 35 35 35 19 19 20 20 21 21
B 16.5 16.5 32.25 32.25 31.25 31.25 14.5 14.5 14.5 14.5 15 15
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD8201610FM150 HD8201610FM200 HD8201612FM150 HD8201612FM200 HD8201614FM150 HD8201614FM200 HD820182FM150 HD820182FM200 HD820183FM150 HD820183FM200 HD820184FM150 HD820184FM200
SIZE 18X5 18X5 18X6 18X6 18X8 18X8 18X10 18X10 18X12 18X12 18X14 18X14
A 22 22 23 23 25 25 30.75 30.75 32.75 32.75 37 37
B 17 17 17 17 17.5 17.5 17.5 17.5 19 19 32 32
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820185FM150 HD820185FM200 HD820186FM150 HD820186FM200 HD820188FM150 HD820188FM200 HD8201810FM150 HD8201810FM200 HD8201812FM150 HD8201812FM200 HD8201814FM150 HD8201814FM200
SIZE 18X16 18X16 20X2 20X2 20X3 20X3 20X4 20X4 20X5 20X5 20X6 20X6
A 37 37 26 26 27.5 27.5 29 29 30 30 31 31
B 32.25 32.25 15.5 15.5 15.5 15.5 16 16 18 18 18 18
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD8201816FM150 HD8201816FM200 HD820202FM150 HD820202FM200 HD820203FM150 HD820203FM200 HD820204FM150 HD820204FM200 HD820205FM150 HD820205FM200 HD820206FM150 HD820206FM200
PAGE #45
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
IPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
SIZE 20X8 20X8 20X10 20X10 20X12 20X12 20X14 20X14 20X16 20X16 20X18 20X18
A 33.5 33.5 36 36 38 38 38.5 38.5 38.5 38.5 38.5 38.5
B 18.5 18.5 18.5 18.5 20 20 37.75 37.75 36 36 35.25 35.25
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820208FM150 HD820208FM200 HD8202010FM150 HD8202010FM200 HD8202012FM150 HD8202012FM200 HD8202014FM150 HD8202014FM200 HD8202016FM150 HD8202016FM200 HD8202018FM150 HD8202018FM200
SIZE 22X2 22X2 22X3 22X3 22X4 22X4 22X5 22X5 22X6 22X6 22X8 22X8
A 26 26 27.5 27.5 29 29 30 30 31 31 33.5 33.5
B 16.5 16.5 16.5 16.5 17 17 19 19 19 19 19.5 19.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820222FM150 HD820222FM200 HD820223FM150 HD820223FM200 HD820224FM150 HD820224FM200 HD820225FM150 HD820225FM200 HD820226FM150 HD820226FM200 HD820228FM150 HD820228FM200
SIZE 22X10 22X10 22X12 22X12 22X14 22X14 22X16 22X16 22X18 22X18 22X20 22X20
A 36 36 38 38 42 42 42 42 42 42 42 42
B 19.5 19.5 21 21 42.5 42.5 38.75 38.75 38 38 36.25 36.25
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD8202210FM150 HD8202210FM200 HD8202212FM150 HD8202212FM200 HD8202214FM150 HD8202214FM200 HD8202216FM150 HD8202216FM150 HD8202218FM150 HD8202218FM200 HD8202220FM150 HD8202220FM200
SIZE 24X2 24X2 24X3 24X3 24X4 24X4 24X5 24X5 24X6 24X6 24X8 24X8
A 26 26 27.5 27.5 29 29 30 30 31 31 33.5 33.5
B 17.5 17.5 17.5 17.5 18 18 20 20 20 20 20.5 20.5
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD820242FM150 HD820242FM200 HD820243FM150 HD820243FM200 HD820244FM150 HD820244FM200 HD820245FM150 HD820245FM200 HD820246FM150 HD820246FM200 HD820248FM150 HD820248FM200
SIZE 24X10 24X10 24X12 24X12 24X14 24X14 24X16 24X16 24X18 24X18 24X20 24X20
A 36 36 38 38 44 56 44 56 44 56 44 56
B 20.5 20.5 22 22 45.25 51 43.5 49.5 40.75 46.75 39 45
PRESSURE CLASS 150 200 150 200 150 200 150 200 150 200 150 200
PART # HD8202410FM150 HD8202410FM200 HD8202412FM150 HD8202412FM200 HD8202414FM150 HD8202414FM200 HD8202416FM150 HD8202416FM200 HD8202418FM150 HD8202418FM200 HD8202420FM150 HD8202420FM200
PAGE #46
888-734-8846 (T)
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
IPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
SIZE 24X22 24X22
A 44 56
B 37.25 43.25
PRESSURE CLASS 150 200
PART # HD8202422FM150 HD8202422FM200
PAGE #47
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
888-734-8846 (T) 406-777-3466 (T)
SIZE A B C CLASS SIZE A B C CLASS
2" 5.5 11.375 3.94 150 24" 11 24.5 28 150
2" 5.5 11.375 3.94 200 24" 10.75 24 28 200
3" 5.5 11.25 5 150
3" 5.5 11.25 5 200
4" 5.25 11 6.61 150
4" 5.25 11 6.61 200
6" 7 14.75 8.5 150
6" 7 14.75 8.5 200
8" 9.75 20 10.63 150
8" 9.75 20 10.63 200
10" 10.25 21.25 12.99 150
10" 10.25 21.25 12.99 200
12" 9.5 19.75 15.75 150
12" 9.5 19.75 15.75 200
14" 9.25 19.75 17.5 150
14" 9 19.5 17.5 200
16" 10 21.5 20 150
16" 9.75 21.25 20 200
18" 10 21.5 21.1 150
18" 9.5 21 21.12 200
20" 9.75 21.25 23.5 150
20" 9.25 20.75 23.5 200
22" 9.5 21 25.5 150
22" 9 20.25 25.5 200
NOTE:
Description: IPS HDPE WALL ANCHOR Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #48
HD69122FM150
HD69122FM200
HD69124FM150
HD69124FM200
HD69116FM150
HD69116FM200
HD69118FM150
HD69118FM200
HD69120FM150
HD6916FM200
HD6918FM150
HD69120FM200
HD69110FM150
HD69110FM200
HD69112FM150
HD69112FM200
HD69114FM150
HD69114FM200
HD6914FM200
HD6916FM150
HD6913FM150
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)
HD6918FM200
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
PART #
HD6913FM200
HD6914FM150
HD6912FM150
HD6912FM200
PART #
CL/150 CL/200
SIZE OD A B C PART # PART #
2" 2.375 23 17 5.75 HD9202FM150 HD9202FM200
3" 3.5 24.5 18.25 5.5 HD9203FM150 HD9203FM200
4" 4.5 29 21.5 6.75 HD9204FM150 HD9204FM200
5" 5.563 34.5 26.75 6.75 HD9205FM150 HD9205FM200
6" 6.625 36 28 6.75 HD9206FM150 HD9206FM200
8" 8.625 39 30.5 6.75 HD9208FM150 HD9208FM200
10" 10.75 41.75 32.75 6.75 HD92010FM150 HD92010FM200
12" 12.75 46.25 35 8.5 HD92012FM150 HD92012FM200
14" 14 48.25 36.5 8.75 HD92014FM150 HD92014FM200
16" 16 57.25 43 11 HD92016FM150 HD92016FM200
18" 18 63 48.5 10.75 HD92018FM150 HD92018FM200
20" 20 74.25 58.75 11.25 HD92020FM150 HD92020FM200
24" 24 80 63.75 11.5 HD92024FM150 HD92024FM200
NOTE:
Description: IPS HDPE FABRICATED WYE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 2"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #49
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
Main Size Outlet Size H W A CL/150 PART # CL/200 PART #
6"-20" 4" 6.5 5.5 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
8"-20" 6" 8.5 7.5 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
10"-20" 8" 9 9.5 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
12"-20" 10" 9 12.75 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
14"-20" 12" 10.5 14 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
16"-20" 14" 10.5 16 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
18"-20" 16" 10.5 18 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
20"-24" 18" 11.5 20 1.5 HD701SIZEFM150DIPS HD701SIZEFM200DIPS
PART # EXAMPLE 12X4 DIPS BRANCH SADDLE CL 150 = HD701124FM150DIPS
(WHEN PART NUMBERING OUTLET SIZE ALWAYS FOLLOWS MAIN SIZE)
NOTE:
Description: DIPS HDPE BRANCH SADDLES Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6"-24" X 4"-18" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #50
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
PRESSURE
SIZE OD A CLASS PART #
6" 6.9 9.25 150 HD1916FM150DIPS
6" 6.9 9.25 200 HD1916FM200DIPS
8" 9.05 9.25 150 HD1918FM150DIPS
8" 9.05 9.75 200 HD1918FM200DIPS
10" 11.1 9.5 150 HD19110FM150DIPS
10" 11.1 10.5 200 HD19110FM200DIPS
12" 13.2 11 150 HD19112FM150DIPS
12" 13.2 12 200 HD19112FM200DIPS
14 15.3 12 150 HD19114FM150DIPS
14" 15.3 12 200 HD19114FM200DIPS
16" 17.4 12 150 HD19116FM150DIPS
16" 17.4 12 200 HD19116FM200DIPS
18" 19.5 13 150 HD19118FM150DIPS
18" 19.5 13 200 HD19118FM200DIPS
20" 21.6 13 150 HD19120FM150DIPS
20" 21.6 13 200 HD19120FM200DIPS
24" 25.8 13 150 HD19124FM150DIPS
24" 25.8 19.25 200 HD19124FM200DIPS
NOTE:
Description: DIPS HDPE FABRICATED CAP WITH Fittings are manufactured and tested to the requirements of ASTM D3035,
PUP (PLAIN END) D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6" -24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #51
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE A CLASS
4" 7.75 150
4" 7.75 200
6" 10.5 150
6" 10.5 200
8" 11.75 150
8" 11.75 200
10" 13.25 150
10" 13.25 200
12" 15.75 150
12" 15.75 200
14" 16.25 150
14" 16.25 200
16" 17.25 150
16" 17.25 200
18" 18.25 150
18" 18.25 200
20" 19.25 150
20" 19.25 200
24" 22 150
NOTE:
Description: DIPS HDPE CROSS Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM CATALOG PAGE #52
406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
PART #
HD2604FM150DIPS
HD2604FM200DIPS
HD2606FM150DIPS
www.specfit.com
HD2606FM200DIPS
HD2608FM150DIPS
HD2608FM200DIPS
HD26020FM150DIPS
HD26010FM150DIPS
HD26010FM200DIPS
HD26012FM150DIPS
HD26012FM200DIPS
HD26020FM200DIPS
HD26024FM150DIPS
HD26014FM150DIPS
HD26014FM200DIPS
HD26016FM150DIPS
HD26016FM200DIPS
HD26018FM150DIPS
HD26018FM200DIPS
NOTE:
Description: DIPS HDPE FABRICATED REDUCING Fittings are manufactured and tested to the requirements of ASTM D3035,
CROSS TEE (PLAIN-ENDS) D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #53
STEVENSVILLE, MT 59870406-777-3466 (T)
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.
406-777-7181 (F)
6X4 8X4 8X4 8X6 10X4 10X4
17 18 18 23.5 18 18
9.5 10.5 10.5 21 11.5 11.5
200 150 200 200 150 200
HD26064FM200DIPS HD26084FM150DIPS HD26084FM200DIPS HD26086FM200DIPS HD260104FM150DIPS HD260104FM200DIPS
10X6 10X8 10X8 12X4 12X6 12X6
20 26.25 26.25 21 23 23
13.5 26 26 12.5 14.5 14.5
200 150 200 200 150 200
HD260106FM200DIPS HD260108FM150DIPS HD260108FM200DIPS HD260124FM200DIPS HD260126FM150DIPS HD260126FM200DIPS
12X8 12X10 12X10 14X4 14X6 14X6
25 31.25 31.25 21 23 23
15 25.5 25.5 13 15 15
200 150 200 200 150 200
HD260128200DIPS HD2601210FM150DIPS HD2601210FM200DIPS HD260144FM200DIPS HD260146FM150DIPS HD260146FM200DIPS
14X8 14X10 14X10 14X12 16X4 16X4
25 32.5 32.5 32.5 21 21
15.5 28.25 28.25 29.25 15 14
200 150 200 200 150 200
HD260148FM200DIPS HD2601410FM150DIPS HD2601410FM200DIPS HD2601412FM200DIPS HD260164FM150DIPS HD260164FM200DIPS
16X6 16X8 16X8 16X10 16X12
23 25 25 28.75 34.5
16 16.5 16.5 16.5 34
200 150 200 200 150
HD260166FM200DIPS HD260168FM150DIPS HD260168FM200DIPS HD2601610FM200DIPS HD2601612FM150DIPS
PAGE #54
16X12
34.5
34
200
PRESSURE CLASS
B
SIZE 14X8
A
SIZE
PART #
A
SIZE
A
SIZE
B
SIZE
PART #
B
A
21
PRESSURE CLASS
PART #
15.5
14X12
25 32.5
PART #
PRESSURE CLASS
PART #
PRESSURE CLASS
B
A
PRESSURE CLASS
B
23
HD260128FM150DIPS
25
15
150
150
10X6
20
13.5
150
HD260106FM150DIPS
12X8
13
16
150
HD260166FM150DIPS HD2601612FM200DIPS
HD260148FM150DIPS HD2601412FM150DIPS
16X6 16X10
HD260124FM150DIPS
150
150
HD826144FM150DIPS
28.75
16.5
29.25
888-734-8258 (F) 406-777-7181 (F)
150
HD2601610FM150DIPS
www.specfit.com
12X4
21
12.5
150
14X4
DIPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
888-734-8846 (T) 406-777-3466 (T)
HD26064FM150DIPS
STEVENSVILLE, MT 59870BELLINGHAM, WA 98226
8X6
23.5
21
150
HD26086FM150DIPS
6X4
17
9.5
150
16X14 18X4 18X4 18X6 18X8 18X8
34.5 21 21 23 25 25
32 15 15 17 17.5 17.5
200 150 200 200 150 200
HD2601614FM200DIPS HD260184FM150DIPS HD260184FM200DIPS HD260186FM200DIPS HD260188FM150DIPS HD260188FM200DIPS
18X10 18X12 18X12 18X14 18X16
30.75 32.75 32.75 36.5 36.5 36.5
17.5 19 19 32 30 30
200 150 200 200 150 200
HD2601810FM200DIPS HD2601812FM150DIPS HD2601812FM200DIPS HD2601814FM200DIPS HD2601816FM150DIPS HD2601816FM200DIPS
20x4 20x6 20x6 20x8 20x10 20x10
29 31 31 33.5 36 36
16.75 18.75 18.75 19.25 19.25 19.25
200 150 200 200 150 200
HD260204FM200DIPS HD260206FM150DIPS HD260206FM200DIPS HD260208FM200DIPS HD2602010FM150DIPS HD2602010FM200DIPS
20x12 20x14 20x14 20x16 20x18 20x18
38 38.5 38.5 38.5 38.5 38.5
20.75 37.75 37.75 36 35 35
200 150 200 200 150 200
HD2602012FM200DIPS HD2602014FM150DIPS HD2602014FM200DIPS HD2602016FM200DIPS HD2602018FM150DIPS HD2602018FM200DIPS
24x4 24x6 24x6 24x8 24x10 24x10
29 31 31 33.5 36 36
19 21 21 21.5 21.5 21.5
200 150 200 200 150 200
HD260244FM200DIPS HD260246FM150DIPS HD260246FM200DIPS HD260248FM200DIPS HD2602410FM150DIPS HD2602410FM200DIPS
PAGE #55
DIPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
18x16
21.5
150
150
19.25
20x16
36
HD260248FM150DIPS
PART #
PRESSURE CLASS
B
A
SIZE
SIZE
B
SIZE
A
B
PART #
PRESSURE CLASS
B
A
B
24x4
29
19
150
HD260244FM150DIPS
A
PRESSURE CLASS
PART #
HD2602016FM150DIPS
150
HD2601810FM150DIPS
150
HD2602012FM150DIPS
29
16.75
20x4
150
HD260204FM150DIPSPART #
150
HD260208FM150DIPS
38.5
PRESSURE CLASS
SIZE
A
20x12
17
150
HD260186FM150DIPS
33.5
18X14
36.5
32
150
HD2601814FM150DIPS
20x8
17.5
16X14
34.5
32
150
HD2601614FM150DIPS
18X6
23
[email protected] [email protected]
406-777-7181 (F)
406-777-3466 (T)
888-734-8258 (F)
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
18X10
30.75
www.specfit.com
888-734-8846 (T)
24x8
33.5
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
38
20.75
SIZE
PART #
PRESSURE CLASS
24x12 24x14 24x14 24x16 24x18 24x18
38 44 56 56 44 56
23 44.5 50.5 48.75 40.75 47
200 150 200 200 150 200
HD2602412FM200DIPS HD2602414FM150DIPS HD2602414FM200DIPS HD2602416FM200DIPS HD2602418FM150DIPS HD2602418FM200DIPS
24x20
56
45.25
200
HD2602420FM200DIPS
PAGE #56
DIPS HDPE FABRICATED REDUCING CROSS TEE DIMENSION CHART
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
SIZE 24x12
PRESSURE CLASS 150 150
B 23 42.75
24x16
A 38 44
A 44
PART # HD2602412FM150DIPS HD2602416FM150DIPS
SIZE 24x20
B 39
PRESSURE CLASS 150
PART # HD2602420FM150DIPS
NOTE:
Description: DIPS HDPE MOLDED Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELECTROFUSION COUPLINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #57
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)888-734-8258 (F)
TYPE B
DIPS ELECTROFUSION COUPLINGS DIMENSION CHART
PRESSURE
PIPE SIZE d & d/2 D L TYPE CLASS PART #
4" IPS 4.8 6.3 6.6 B 150 MHD2454FM150DIPS
4" IPS 4.8 6.3 6.6 B 200 MHD2454FM200DIPS
6" IPS 6.9 8.46 7.87 B 150 MHD2456FM150DIPS
6" IPS 6.9 8.46 7.87 B 200 MHD2456FM200DIPS
8" IPS 9.05 10.6 8.05 B 150 MHD2458FM150DIPS
8" IPS 9.05 10.6 8.05 B 200 MHD2458FM200DIPS
10" IPS 11.1 13 8.66 B 150 MHD24510FM150DIPS
10" IPS 11.1 13 8.66 B 200 MHD24510FM200DIPS
12" IPS 13.2 15.35 9.06 B 150 MHD24512FM150DIPS
12" IPS 13.2 15.35 9.06 B 200 MHD24512FM200DIPS
14" IPS 15.3 18.3 11.8 B 150 MHD24514FM150DIPS
14" IPS 15.3 18.3 11.8 B 200 MHD24514FM200DIPS
16" IPS 17.4 20.86 12.6 B 150 MHD24516FM150DIPS
16" IPS 17.4 20.86 12.6 B 200 MHD24516FM200DIPS
18" IPS 19.5 23.2 14.4 B 150 MHD24518FM150DIPS
18" IPS 19.5 23.2 14.4 B 200 MHD24518FM200DIPS
20" IPS 21.6 26.5 15.7 B 150 MHD24520FM150DIPS
20" IPS 21.6 26.5 15.7 B 200 MHD24520FM200DIPS
24" IPS 25.8 30.5 16.5 B 150 MHD24524FM150DIPS
24" IPS 25.8 30.5 16.5 B 200 MHD24524FM200DIPS
PAGE #58
[email protected] [email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
888-734-8846 (T)
PRESSURE
SIZE A B CLASS PART #
4" 4.1 6.05 150 MHD3504FM150DIPS
4" 4.1 6.05 200 MHD3504FM200DIPS
6" 5.1 7.16 150 MHD3506FM150DIPS
6" 5.1 7.16 200 MHD3506FM200DIPS
8" 5.17 8.32 150 MHD3508FM150DIPS
8" 5.17 8.32 200 MHD3508FM200DIPS
NOTE:
Description: DIPS HDPE MOLDED 45 DEGREE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #59
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
PRESSURE
SIZE A B CLASS PART #
4" 4.1 7.82 150 MHD3704FM150DIPS
4" 4.1 7.82 200 MHD3704FM200DIPS
6" 5.1 9.67 150 MHD3706FM150DIPS
6' 5.1 9.67 200 MHD3706FM200DIPS
8' 5.17 11.58 150 MHD3708FM150DIPS
8' 5.17 11.58 200 MHD3708FM200DIPS
NOTE:
Description: DIPS HDPE MOLDED 90 DEGREE Molded fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #60
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.5 6 6 HD3104FM150DIPS HD3104FM200DIPS
6" 6.625 6.75 7 HD3106FM150DIPS HD3106FM200DIPS
8" 8.625 7.5 7.75 HD3108FM150DIPS HD3108FM200DIPS
10" 10.75 7.5 8 HD31010FM150DIPS HD31010FM200DIPS
12" 12.75 8 8.75 HD31012FM150DIPS HD31012FM200DIPS
14" 14 9.25 10 HD31014FM150DIPS HD31014FM200DIPS
16" 16 9.75 10.5 HD31016FM150DIPS HD31016FM200DIPS
18" 18 10.5 11.5 HD31018FM150DIPS HD31018FM200DIPS
20" 20 10.75 11.75 HD31020FM150DIPS HD31020FM200DIPS
24" 24 11.25 12.5 HD31024FM150DIPS HD31024FM200DIPS
NOTE:
Description: DIPS HDPE 2 PC 11.25 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG PAGE #61
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.75 6 HD3304FM150DIPS HD3304FM200DIPS
6" 6.9 6.5 7 HD3306FM150DIPS HD3306FM200DIPS
8" 9.05 7 7.75 HD3308FM150DIPS HD3308FM200DIPS
10" 11.1 7 8 HD33010FM150DIPS HD33010FM200DIPS
12" 13.2 7.5 8.75 HD33012FM150DIPS HD33012FM200DIPS
14" 15.3 8.5 10 HD33014FM150DIPS HD33014FM200DIPS
16" 17.4 9 10.5 HD33016FM150DIPS HD33016FM200DIPS
18" 19.5 9.5 11.5 HD33018FM150DIPS HD33018FM200DIPS
20" 21.6 10.75 11.75 HD33020FM150DIPS HD33020FM200DIPS
24" 25.8 10 12.5 HD33024FM150DIPS HD33024FM200DIPS
NOTE:
Description: DIPS HDPE 2 PC 22.5 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #62
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.75 6.25 HD3404FM150DIPS HD3404FM200DIPS
6" 6.9 6.5 7.5 HD3406FM150DIPS HD3406FM200DIPS
8" 9.05 7.25 8.25 HD3408FM150DIPS HD3408FM200DIPS
10" 11.1 7.25 8.75 HD34010FM150DIPS HD34010FM200DIPS
12" 13.2 7.75 9.5 HD34012FM150DIPS HD34012FM200DIPS
14" 15.3 8.75 10.75 HD34014FM150DIPS HD34014FM200DIPS
16' 17.4 9.25 11.5 HD34016FM150DIPS HD34016FM200DIPS
18' 19.5 10 12.5 HD34018FM150DIPS HD34018FM200DIPS
20" 21.6 10 13 HD34020FM150DIPS HD34020FM200DIPS
24" 25.8 10.5 14 HD34024FM150DIPS HD34024FM200DIPS
NOTE:
Description: DIPS HDPE 2 PC 30 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #63
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART#
4" 4.8 5.5 6.5 HD3494FM150DIPS HD3494FM200DIPS
6" 6.9 6.5 7.75 HD3496FM150DIPS HD3496FM200DIPS
8" 9.05 7 8.75 HD3498FM150DIPS HD3498FM200DIPS
10" 11.1 7.25 9.5 HD34910FM150DIPS HD34910FM200DIPS
12" 13.2 7.75 10.5 HD34912FM150DIPS HD34912FM200DIPS
14" 15.3 8.5 11.75 HD34914FM150DIPS HD34914FM200DIPS
16" 17.4 9 12.5 HD34916FM150DIPS HD34916FM200DIPS
18" 19.5 9.75 13.75 HD34918FM150DIPS HD34918FM200DIPS
20" 21.6 9.75 14.25 HD34920FM150DIPS HD34920FM200DIPS
24" 25.8 9.75 15.25 HD34924FM150DIPS HD34924FM200DIPS
NOTE:
Description: DIPS HDPE 2 PC 45 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #64
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.5 7 HD2594FM150DIPS HD2594FM200DIPS
6" 6.9 6.5 8.5 HD2596FM150DIPS HD2596FM200DIPS
8" 9.05 7 9.5 HD2598FM150DIPS HD2598FM200DIPS
10" 11.1 7 10.25 HD25910FM150DIPS HD25910FM200DIPS
12" 13.2 7.75 11.5 HD25912FM150DIPS HD25912FM200DIPS
14" 15.3 8.5 12.75 HD25914FM150DIPS HD25914FM200DIPS
16" 17.4 9 14 HD25916FM150DIPS HD25916FM200DIPS
18" 19.5 9.5 15 HD25918FM150DIPS HD25918FM200DIPS
20" 21.6 9.75 15.75 HD25920FM150DIPS HD25920FM200DIPS
24' 25.8 10 17.5 HD25924FM150DIPS HD25924FM200DIPS
NOTE:
Description: DIPS HDPE 2 PC. 60 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM CATALOG PAGE #65
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.75 14.75 HD3504FM150DIPS HD3504FM200DIPS
6" 6.9 6.5 17 HD3506FM150DIPS HD3506FM200DIPS
8" 9.05 7 20.5 HD3508FM150DIPS HD3508FM200DIPS
10" 11.1 7 21.5 HD35010FM150DIPS HD35010FM200DIPS
12" 13.2 7.5 23.25 HD35012FM150DIPS HD35012FM200DIPS
14" 15.3 8.5 26.25 HD35014FM150DIPS HD35014FM200DIPS
16" 17.4 9 28.25 HD35016FM150DIPS HD35016FM200DIPS
18" 19.5 9.5 31 HD35018FM150DIPS HD35018FM200DIPS
20" 21.6 9.5 32.25 HD35020FM150DIPS HD35020FM200DIPS
24" 25.8 10 36.25 HD35024FM150DIPS HD35024FM200DIPS
NOTE:
Description: DIPS HDPE 3 PC 45 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
ELBOW PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #66
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.75 14 HD3604FM150DIPS HD3604FM200DIPS
6" 6.9 6.5 16 HD3606FM150DIPS HD3606FM200DIPS
8" 9.05 7.25 19.5 HD3608FM150DIPS HD3608FM200DIPS
10" 11.1 7.25 21 HD36010FM150DIPS HD36010FM200DIPS
12" 13.2 7.75 23 HD36012FM150DIPS HD36012FM200DIPS
14" 15.3 8.75 26 HD36014FM150DIPS HD36014FM200DIPS
16" 17.4 9.25 28 HD36016FM150DIPS HD36016FM200DIPS
18" 19.5 10 30.75 HD36018FM150DIPS HD36018FM200DIPS
20" 21.6 10 32.25 HD36020FM150DIPS HD36020FM200DIPS
24" 25.8 10.5 36.5 HD36024 FM150DIPS HD36024FM200DIPS
NOTE:
Description: DIPS HDPE 3 PC 60 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.2, Copyright 2012Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #67
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.5 10.75 HD3694FM150DIPS HD3694FM200DIPS
6" 6.9 6.5 12.5 HD3696FM150DIPS HD3696FM200DIPS
8" 9.05 7 15.5 HD3698FM150DIPS HD3698FM200DIPS
10" 11.1 7.25 17 HD36910FM150DIPS HD36910FM200DIPS
12" 13.2 7.75 18.75 HD36912FM150DIPS HD36912FM200DIPS
14" 15.3 8.75 20.75 HD36914FM150DIPS HD36914FM200DIPS
16" 17.4 9.25 22.5 HD36916FM150DIPS HD36916FM200DIPS
18" 19.5 10 25 HD36918FM150DIPS HD36918FM200DIPS
20" 21.6 9.75 27 HD36920FM150DIPS HD36920FM200DIPS
24" 25.8 9.75 30.5 HD36924FM150DIPS HD36924FM200DIPS
NOTE:
Description: DIPS HDPE 3 PC 90 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #68-
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SIZE OD A B CL/150 PART # CL/200 PART #
4" 4.8 5.75 15.5 HD3704FM150DIPS HD3704FM200DIPS
6" 6.9 6.5 17.5 HD3706FM150DIPS HD3706FM200DIPS
8" 9.05 7 23 HD3708FM150DIPS HD3708FM200DIPS
10" 11.1 7 25 HD37010FM150DIPS HD37010FM200DIPS
12" 13.2 7.5 27 HD37012FM150DIPS HD37012FM200DIPS
14" 15.3 8.5 30.25 HD37014FM150DIPS HD37014FM200DIPS
16" 17.4 9 32.75 HD37016FM150DIPS HD37016FM200DIPS
18" 19.5 9.5 36.5 HD37018FM150DIPS HD37018FM200DIPS
20" 21.6 9.5 38.5 HD37020FM150DIPS HD37020FM200DIPS
24" 25.8 10 45 HD37024FM150DIPS HD37024FM200DIPS
NOTE:
Description: DIPS HDPE 5 PC 90 DEGREE ELBOW Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #69
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
PRESSURE
SIZE A B C CLASS
4" 6 0.68 6.56 150
4" 6 0.68 6.56 200
6" 8 1.08 8.6 150
6" 8 1.08 8.6 200
8" 9 1.38 10.72 150
8" 9 1.38 10.72 200
10" 9 1.88 13.17 150
10' 9 1.88 13.17 200
12" 11 2.13 15.97 150
12" 11 2.13 15.97 200
14" 12 2.25 17.4 150
14" 12 2.25 17.4 200 MHD52014FM200DIPS
16" 11.5 2.88 19.9 150
16" 11.5 2.88 19.9 200 MHD52016FM200DIPS
20" 11.5 3.63 23.66 150
20" 11.5 3.63 23.66 200 MHD52020FM200DIPS
24" 11.5 4.13 27.9 150
24" 11.5 4.13 27.9 200 MHD52024FM200DIPS
NOTE:
Description: DIPS HDPE MOLDED FLANGE ADAPTER Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-END D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #70
MHD5204FM150DIPS
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
MHD52016FM150DIPS
MHD52020FM150DIPS
MHD52024FM150DIPS
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
MHD52012FM200DIPS
MHD52014FM150DIPS
PART #
MHD52012FM150DIPS
MHD52010FM200DIPS
MHD52010FM150DIPS
MHD5204FM200DIPS
MHD5206FM150DIPS
MHD5206FM200DIPS
MHD5208FM150DIPS
MHD5208FM200DIPS
NOTE:
Description: DIPS 316 STAINLESS STEEL Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: 316 STAINLESS STEEL requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #71
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)888-734-8258 (F)
DIPS 316 STAINLESS STEEL FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS
4" 9 0.94 4.9 8 0.75 7.5 0.5 150/200
6" 11 1 7 8 0.875 9.5 0.5 150/200
8" 13.5 1.12 9.13 8 0.875 11.75 0.5 150/200
10" 16 1.27 11.25 12 1 14.25 0.5 150/200
12" 19 1.77 13.37 12 1 17 0.5 150/200
14" 21 1.61 15.48 12 1.125 18.75 0.5 150
14" 21 1.78 15.48 12 1.125 18.75 0.5 200
16" 23.5 1.89 17.59 16 1.125 21.25 0.5 150
16" 23.5 2.17 17.59 16 1.125 21.25 0.5 200
18" 25 1.56 19.7 16 1.25 22.75 0.5 150
18" 25 2.06 19.7 16 1.25 22.75 0.5 200
20" 27.5 2.15 21.85 20 1.25 25 0.5 150
20" 27.5 2.27 21.85 20 1.25 25 0.5 200
24" 32 2.5 29.05 20 1.375 29.5 0.5 150
24" 32 2.6 26.05 20 1.375 29.5 0.5 200
PAGE #72
BR18FM1506SSDIPS
BR18FM2006SSDIPS
BR20FM1506SSDIPS
BR20FM2006SSDIPS
BR24FM1506SSDIPS
BR24FM2006SSDIPS
PART #
BR4FM2006SSDIPS
BR16FM1506SSDIPS
BR16FM2006SSDIPS
BR6FM2006SSDIPS
BR8FM2006SSDIPS
BR10FM2006SSDIPS
BR12FM2006SSDIPS
888-734-8846 (T) 406-777-3466 (T)
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8258 (F) 406-777-7181 (F)
BR14FM1506SSDIPS
BR14FM2006SSDIPS
[email protected] [email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
NOTE:
Description: DIPS EPOXY COATED DUCTILE IRON Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: DUCTILE IRON requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #73
888-734-8258 (F)[email protected] [email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)
DIPS EPOXY COATED DUCTILE IRON FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS
4" 9 0.94 4.9 8 0.75 7.5 0.44 150/200
6" 11 1 7 8 0.875 9.5 0.5 150/200
8" 13.5 1.12 9.13 8 0.875 11.75 0.5 150/200
10" 16 1.19 11.25 12 1 14.25 0.5 150/200
12" 19 1.5 13.37 12 1 17 0.5 150/200
14" 21 1.63 15.48 12 1.125 18.75 0.5 150/200
16" 23.5 1.88 17.59 16 1.125 21.25 0.5 150/200
18" 25 1.75 19.7 16 1.25 22.75 0.5 150/200
20" 27.5 2.06 21.85 20 1.25 25 0.5 150/200
24" 32 2.13 26.05 20 1.375 29.5 0.5 150/200
PAGE #74
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
SPECIFIED FITTINGS, INC164 W. SMITH RD
BR18FM200DIPS
483 STEVENSVILLE AIRPORT RD.
BR20FM200DIPS
BR24FM200DIPS
PART #
BR4FM200DIPS
BR6FM200DIPS
BR8FM200DIPS
BR10FM200DIPS
BR12FM200DIPS
BR14FM200DIPS
BR16FM200DIPS
NOTE:
Description: DIPS PRIMER COATED DUCTILE IRON Fittings are manufactured and tested to the requirements of ASTM D3035,
FLANGE RINGS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: DUCTILE IRON requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #75
406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)
DIPS PRIMER COATED DUCTILE IRON FLANGE RING DIMENSION CHART
PRESSURE
SIZE O.D. T I.D. BOLTS H B.C. R CLASS
4" 9 0.94 4.9 8 0.75 7.5 0.44 150/200
6" 11 1 7 8 0.875 9.5 0.5 150/200
8" 13.5 1.12 9.13 8 0.875 11.75 0.5 150/200
10" 16 1.19 11.25 12 1 14.25 0.5 150/200
12" 19 1.5 13.37 12 1 17 0.5 150/200
14" 21 1.63 15.48 12 1.125 18.75 0.5 150/200
16" 23.5 1.88 17.59 16 1.125 21.25 0.5 150/200
18" 25 1.75 19.7 16 1.25 22.75 0.5 150/200
20" 27.5 2.06 21.85 20 1.25 25 0.5 150/200
24" 32 2.13 26.05 20 1.375 29.5 0.5 150/200
PAGE #76
BR18FM200PDIPS
BR20FM200PDIPS
BR24FM200PDIPS
PART #
BR4FM200PDIPS
BR6FM200PDIPS
BR8FM200PDIPS
BR10FM200PDIPS
BR12FM200PDIPS
BR14FM200PDIPS
BR16FM200PDIPS
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
PRESSURE
SIZE OD L CLASS
4" 4.8" 10.25 150
4" 4.8" 10.25 200
6" 6.9" 11.31 150
6" 6.9" 11.31 200
8" 9.05" 14 150
8" 9.05" 14 200
10" 11.1" 13.56 150
10" 11.1" 13.56 200
12" 13.2" 13 150
12" 13.2" 13 200
14" 15.3" 13 150
14" 15.3" 13 200
16" 17.4" 13 150
16" 17.4" 13 200
18" 19.5" 13 150
18" 19.5" 13 200
20" 21.6 16 150
20" 21.6 16 200
24" 25.8 18 150
24" 25.8 18 200
NOTE:
Description: DIPS HDPE MJ ADAPTER Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #77
MHD5486FM150DIPS
MHD5486FM200DIPS
PART #
MHD5484FM150DIPS
MHD5484FM200DIPS
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-7181 (F)406-777-3466 (T)
MHD54824FM200DIPS
MHD54820FM150DIPS
MHD54820FM200DIPS
888-734-8258 (F)[email protected]
MHD54818FM150DIPS
MHD5488FM200DIPS
MHD54812FM150DIPS
MHD5488FM150DIPS
MHD54812FM200DIPS
MHD54818FM200DIPS
MHD54810FM150DIPS
MHD54810FM200DIPS
MHD54824FM150DIPS
MHD54814FM150DIPS
MHD54814FM200DIPS
MHD54816FM150DIPS
MHD54816FM200DIPS
NOTE:
Description: DIPS HDPE FABRICATED CONCENTRIC Fittings are manufactured and tested to the requirements of ASTM D3035,
REDUCERS (PLAIN-ENDS) D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6" - 26" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #78
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
DIPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
6X4 4.75 7 15.25 150 HDS60064FM150DIPS 14X12 8.5 11 22.5 150 HDS6001412FM150DIPS
6X4 4.75 7 15.25 200 HDS60064FM200DIPS 14X12 8.5 11 22.5 200 HDS6001412FM200DIPS
8X4 4.75 7.5 20.25 150 HDS60084FM150DIPS 16X4 4.75 11 34.75 150 HDS600164FM150DIPS
8X4 4.75 7.5 20.25 200 HDS60084FM200DIPS 16X4 4.75 11 34.75 200 HDS600164FM200DIPS
8X6 6.75 7.5 17.75 150 HDS60086FM150DIPS 16X6 6.75 11 28.5 150 HDS600166FM150DIPS
8X6 6.75 7.5 17.75 200 HDS60086FM200DIPS 16X6 6.75 11 28.5 200 HDS600166FM200DIPS
10X4 4.75 7.5 22.25 150 HDS600104FM150DIPS 16X8 7.25 11 26.25 150 HDS600168FM150DIPS
10X4 4.75 7.5 22.25 200 HDS600104FM200DIPS 16X8 7.25 11 26.25 200 HDS600168FM200DIPS
10X6 6.75 7.5 18.5 150 HDS600106FM150DIPS 16X10 7 11 23.5 150 HDS6001610FM150DIPS
10X6 6.75 7.5 18.5 200 HDS600106FM200DIPS 16X10 7 11 23.5 200 HDS6001610FM200DIPS
10X8 7.25 7.5 18 150 HDS600108FM150DIPS 16X12 8.5 11 23.25 150 HDS6001612FM150DIPS
10X8 7.25 7.5 18 200 HDS600108FM200DIPS 16X12 8.5 11 23.25 200 HDS6001612FM200DIPS
12X4 4.75 11 29 150 HDS600124FM150DIPS 16X14 8.5 11 21.25 150 HDS6001614FM150DIPS
12X4 4.75 11 29 200 HDS600124FM200DIPS 16X14 8.5 11 21.25 200 HDS6001614FM200DIPS
12X6 6.75 11 26.75 150 HDS600126FM150DIPS 18X4 4.625 12 40 150 HDS600184FM150DIPS
12X6 6.75 11 26.75 200 HDS600126FM200DIPS 18X4 4.625 12 40 200 HDS600184FM200DIPS
12X8 7.25 11 21.5 150 HDS600128FM150DIPS 18X6 6.75 12 36.75 150 HDS600186FM150DIPS
12X8 7.25 11 21.5 200 HDS600128FM200DIPS 18X6 6.75 12 36.75 200 HDS600186FM200DIPS
12X10 7 11 19.75 150 HDS6001210FM150DIPS 18X8 7.25 12 29 150 HDS600188FM150DIPS
12X10 7 11 19.75 200 HDS6001210FM200DIPS 18X8 7.25 12 29 200 HDS600188FM200DIPS
14X4 4.75 11 33 150 HDS600144FM150DIPS 18X10 7 12 27.25 150 HDS6001810FM150DIPS
14X4 4.75 11 33 200 HDS600144FM200DIPS 18X10 7 12 27.25 200 HDS6001810FM200DIPS
14X6 6.75 11 26.75 150 HDS600146FM150DIPS 18X12 8.5 12 26 150 HDS6001812FM150DIPS
14X6 6.75 11 26.75 200 HDS600146FM200DIPS 18X12 8.5 12 26 200 HDS6001812FM200DIPS
14X8 7.25 11 26 150 HDS600148FM150DIPS 18X14 8.5 12 24.25 150 HDS6001814FM150DIPS
14X8 7.25 11 26 200 HDS600148FM200DIPS 18X14 8.5 12 24.25 200 HDS6001814FM200DIPS
14X10 7 11 21.75 150 HDS6001410FM150DIPS 18x16 8.5 12 22.25 150 HDS6001816FM150DIPS
14X10 7 11 21.75 200 HDS6001410FM200DIPS 18X16 8.5 12 22.25 200 HDS6001816FM200DIPS
PAGE #79
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
www.specfit.com
DIPS HDPE FABRICATED CONCENTRIC REDUCER DIMENSION CHART
PRESSURE PRESSURE
SIZE A B C CLASS PART # SIZE A B C CLASS PART #
20X4 4.75 12 43.75 150 HDS600204FM150DIPS 24X6 6.75 12 46.75 150 HDS600246FM150DIPS
20X4 4.75 12 43.75 200 HDS600204FM200DIPS 24X6 6.75 12 46.75 200 HDS600246FM200DIPS
20X6 6.75 12 37.5 150 HDS600206FM150DIPS 24X8 7.25 12 39 150 HDS600248FM150DIPS
20X6 6.75 12 37.5 200 HDS600206FM200DIPS 24X8 7.25 12 39 200 HDS600248FM200DIPS
20X8 7.25 12 37 150 HDS600208FM150DIPS 24X10 7 12 37.25 150 HDS6002410FM150DIPS
20X8 7.25 12 37 200 HDS600208FM200DIPS 24X10 7 12 37.25 200 HDS6002410FM200DIPS
20X10 7 12 29 150 HDS6002010FM150DIPS 24X12 8.5 12 32.5 150 HDS6002412FM150DIPS
20X10 7 12 29 200 HDS6002010FM200DIPS 24X12 8.5 12 32.5 200 HDS6002412FM200DIPS
20X12 8.5 12 30 150 HDS6002012FM150DIPS 24X14 8.5 12 30.5 150 HDS6002414FM150DIPS
20X12 8.5 12 30 200 HDS6002012FM200DIPS 24X14 8.5 12 30.5 200 HDS6002414FM200DIPS
20X14 8.5 12 26 150 HDS6002014FM150DIPS 24X16 8.5 12 28.75 150 HDS6002416FM150DIPS
20X14 8.5 12 26 200 HDS6002014FM200DIPS 24X16 8.5 12 28.75 200 HDS6002416FM200DIPS
20X16 8.5 12 24.25 150 HDS6002016FM150DIPS 24X18 9.5 12 27 150 HDS6002418FM150DIPS
20X16 8.5 12 24.25 200 HDS6002016FM200DIPS 24X18 9.5 12 27 200 HDS6002418FM200DIPS
20X18 9.5 12 23.25 150 HDS6002018FM150DIPS 24X20 9.5 12 25.25 150 HDS6002420FM150DIPS
20X18 9.5 12 23.25 200 HDS6002018FM200DIPS 24X20 9.5 12 25.25 200 HDS6002420FM200DIPS
24X4 4.75 12 50 150 HDS600244FM150DIPS
24X4 4.75 12 50 200 HDS600244FM200DIPS
.
PAGE #80
406-777-3466 (T)
SPECIFIED FITTINGS, INC
www.specfit.com
164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
888-734-8846 (T)
888-734-8258 (F) 406-777-7181 (F)
CL/150 CL/200
SIZE OD A B R PART # PART #
4" 4.8 6 9.6 13.5 HD7834FM150DIPS HD7834FM200DIPS
6" 6.9 7 12.3 19.9 HD7836FM150DIPS HD7836FM200DIPS
8" 9.05 10 16.6 24.5 HD7838FM150DIPS HD7838FM200DIPS
10" 11.1 11 19.6 32.25 HD78310FM150DIPS HD78310FM200DIPS
12" 13.2 13 23.3 38.3 HD78312FM150DIPS HD78312FM200DIPS
14" 15.3 13 23.4 38.9 HD78314FM150DIPS HD78314FM200DIPS
NOTE:
Description: DIPS HDPE 30 DEGREE Fittings are manufactured and tested to the requirements of ASTM D3035,
SWEEP PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #81
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
CL/150 CL/200
SIZE OD A B R PART # PART #
4" 4.8 6 11.6 13.5 HD7844FM150DIPS HD7844FM200DIPS
6" 6.9 7 15.2 19.9 HD7846FM150DIPS HD7846FM200DIPS
8" 9.05 10 20.1 24.5 HD7848FM150DIPS HD7848FM200DIPS
10" 11.1 11 24.4 32.25 HD78410FM150DIPS HD78410FM200DIPS
12" 13.2 13 28.9 38.3 HD78412FM150DIPS HD78412FM200DIPS
14" 15.3 13 29.1 38.9 HD78414FM150DIPS HD78414FM200DIPS
NOTE:
Description: DIPS HDPE 45 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #82
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
CL/150 CL/200
SIZE OD A B R PART # PART #
4" 4.8 6 13.8 13.5 HD7854FM150DIPS HD7854FM200DIPS
6" 6.9 7 18.5 19.9 HD7856FM150DIPS HD7856FM200DIPS
8" 9.05 10 24.1 24.5 HD7858FM150DIPS HD7858FM200DIPS
10" 11.1 11 29.6 32.25 HD78510FM150DIPS HD78510FM200DIPS
12" 13.2 13 35.1 38.3 HD78512FM150DIPS HD78512FM200DIPS
14" 15.3 13 35.5 38.9 HD78514FM150DIPS HD78514FM200DIPS
NOTE:
Description: DIPS HDPE 60 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #83
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
CL/150 CL/200
SIZE OD A B R PART # PART #
4" 4.5 5 23 18 HD7864FM150DIPS HD7864FM200DIPS
6" 6.625 7 26.9 19.9 HD7866FM150DIPS HD7866FM200DIPS
8" 8.625 10 34.5 24.5 HD7868FM150DIPS HD7868FM200DIPS
10" 10.75 11 43.25 32.25 HD78610FM150DIPS HD78610FM200DIPS
12" 12.75 13 51.3 38.3 HD78612FM150DIPS HD78612FM200DIPS
14" 14 13 51.9 38.9 HD78614FM150DIPS HD78614FM200DIPS
NOTE:
Description: DIPS HDPE 90 DEGREE SWEEP Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-14" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #84
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
www.specfit.com
888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
PRESSURE
SIZE A B L CLASS PART #
4" 4.1 7.85 15.63 150 MHD8204FM150DIPS
4" 4.1 7.85 15.63 200 MHD8204FM200DIPS
6" 5.1 9.67 19.34 150 MHD8206FM150DIPS
6" 5.1 9.67 19.34 200 MHD8206FM200DIPS
8" 5.17 11.58 23.15 150 MHD8208FM150DIPS
8" 5.17 11.58 23.15 200 MHD8208FM200DIPS
NOTE:
Description: DIPS HDPE MOLDED TEES Molded fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-8" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #85
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
CL/150
SIZE OD A B PART #
4" 4.8 15.5 7.75 HD8204FM150DIPS
6" 6.9 21 10.5 HD8206FM150DIPS
8" 9.05 23.5 11.75 HD8208FM150DIPS
10" 11.1 26.25 13.25 HD82010FM150DIPS
12" 13.2 31.25 15.75 HD82012FM150DIPS
14" 15.3 32.5 16.25 HD82014FM150DIPS
16" 17.4 34.5 17.25 HD82016FM150DIPS
18" 19.5 36.5 18.25 HD82018FM150DIPS
20" 21.6 38.5 19.25 HD82020FM150DIPS
24" 25.8 44 22 HD82024FM150DIPS
CL/200
SIZE OD A B PART #
4" 4.8 15.5 7.75 HD8204FM200DIPS
6" 6.9 21 10.5 HD8206FM200DIPS
8" 9.05 23.5 11.75 HD8208FM200DIPS
10" 11.1 26.25 13.25 HD82010FM200DIPS
12" 13.2 31.25 15.75 HD82012FM200DIPS
14" 15.3 32.5 16.25 HD82014FM200DIPS
16" 17.4 34.5 17.25 HD82016FM200DIPS
18" 19.5 36.5 18.25 HD82018FM200DIPS
20" 21.6 38.5 19.25 HD82020FM200DIPS
24" 25.8 56 28 HD82024FM200DIPS
NOTE:
Description: DIPS HDPE FABRICATED TEE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #86
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]
NOTE:
Description: DIPS HDPE FABRICATED REDUCING TEE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 6"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #87
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)[email protected]
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
DIPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
6X4 8X4 8X4 8X6 10X4 10X4
17 18 18 23.5 18 18
9.5 10.5 10.5 21 11.5 11.5
200 150 200 200 150 200
HD82064FM200DIPS HD82084FM150DIPS HD82084FM200DIPS HD82086FM200DIPS HD820104FM150DIPS HD820104FM200DIPS
10X6 10X8 10X8 12X4 12X6 12X6
20 26.25 26.25 21 23 23
13.5 26 26 12.5 14.5 14.5
200 150 200 200 150 200
HD820106FM200DIPS HD820108FM150DIPS HD820108FM200DIPS HD820124FM200DIPS HD820126FM150DIPS HD820126FM200DIPS
12X8 12X10 12X10 14X4 14X6 14X6
25 31.25 31.25 21 23 23
15 25.5 25.5 13 15 15
200 150 200 200 150 200
HD820128200DIPS HD8201210FM150DIPS HD8201210FM200DIPS HD820144FM200DIPS HD820146FM150DIPS HD820146FM200DIPS
14X8 14X10 14X10 14X12 16X4 16X4
25 32.5 32.5 32.5 21 21
15.5 28.25 28.25 29.25 15 14
200 150 200 200 150 200
HD820148FM200DIPS HD8201410FM150DIPS HD8201410FM200DIPS HD8201412FM200DIPS HD820164FM150DIPS HD820164FM200DIPS
16X6 16X8 16X8 16X10 16X12
23 25 25 28.75 34.5
16 16.5 16.5 16.5 34
200 150 200 200 150
HD820166FM200DIPS HD820168FM150DIPS HD820168FM200DIPS HD8201610FM200DIPS HD8201612FM150DIPS
PAGE #88
HD82086FM150DIPSHD82064FM150DIPS
6X4
17
8X6
23.5
21
150
9.5
150
483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
12.5
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD
www.specfit.com
12X4
21
28.75
16.5
150
HD8201610FM150DIPS
150
HD820124FM150DIPS
HD820148FM150DIPS HD8201412FM150DIPS
16X6 16X10
16
150
HD820166FM150DIPS
10X6
20
13.5
150
HD820106FM150DIPS
12X8 14X4
2125
13
150
HD820144FM150DIPS
23
HD820128FM150DIPS
15
150
29.25
150 150
PRESSURE CLASS
B
PRESSURE CLASS
PART #
PART #
A
SIZE
PART #
PRESSURE CLASS
B
PART #
PRESSURE CLASS
PRESSURE CLASS
B
A
SIZE
A
SIZE
B
SIZE
PART #
B 15.5
A
SIZE 14X8 14X12
A 25 32.5
16X12
34.5
34
200
HD8201612FM200DIPS
DIPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
16X14 18X4 18X4 18X6 18X8 18X8
34.5 21 21 23 25 25
32 15 15 17 17.5 17.5
200 150 200 200 150 200
HD8201614FM200DIPS HD820184FM150DIPS HD820184FM200DIPS HD820186FM200DIPS HD820188FM150DIPS HD820188FM200DIPS
18X10 18X12 18X12 18X14 18X16
30.75 32.75 32.75 36.5 36.5 36.5
17.5 19 19 32 30 30
200 150 200 200 150 200
HD8201810FM200DIPS HD8201812FM150DIPS HD8201812FM200DIPS HD8201814FM200DIPS HD8201816FM150DIPS HD8201816FM200DIPS
20x4 20x6 20x6 20x8 20x10 20x10
29 31 31 33.5 36 36
16.75 18.75 18.75 19.25 19.25 19.25
200 150 200 200 150 200
HD820204FM200DIPS HD820206FM150DIPS HD820206FM200DIPS HD820208FM200DIPS HD8202010FM150DIPS HD8202010FM200DIPS
20x12 20x14 20x14 20x16 20x18 20x18
38 38.5 38.5 38.5 38.5 38.5
20.75 37.75 37.75 36 35 35
200 150 200 200 150 200
HD8202012FM200DIPS HD8202014FM150DIPS HD8202014FM200DIPS HD8202016FM200DIPS HD8202018FM150DIPS HD8202018FM200DIPS
24x4 24x6 24x6 24x8 24x10 24x10
29 31 31 33.5 36 36
19 21 21 21.5 21.5 21.5
200 150 200 200 150 200
HD820244FM200DIPS HD820246FM150DIPS HD820246FM200DIPS HD820248FM200DIPS HD8202410FM150DIPS HD8202410FM200DIPS
PAGE #89
B
HD8202016FM150DIPS
SIZE
A
SIZE
SIZE
A
20x12
38
[email protected] [email protected]
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
18X10
30.75
406-777-3466 (T)
888-734-8258 (F)
17.5
16X14
34.5
32
150
HD8201614FM150DIPS
18X6
23
17
150
HD820186FM150DIPS
33.5
18X14
36.5
32
150
HD8201814FM150DIPS
20x8
150
19.25
20x16
36
38.5
150
HD820208FM150DIPS
PART #
PRESSURE CLASS
PRESSURE CLASS
B
PART #
A
150
HD8201810FM150DIPS
150
HD8202012FM150DIPS
29
16.75
20x4
150
HD820204FM150DIPS
20.75
24x4
29
19
150
HD820244FM150DIPS
B
PRESSURE CLASS
PART #
21.5
SIZE
PART #
PRESSURE CLASS
B
A
PART #
24x8
33.5
PRESSURE CLASS
B
A
SIZE
150
HD820248FM150DIPS
18x16
406-777-7181 (F)
www.specfit.com
888-734-8846 (T)
DIPS HDPE FABRICATED REDUCING TEE DIMENSION CHART
24x12 24x14 24x14 24x16 24x18 24x18
38 44 56 56 44 56
23 44.5 50.5 48.75 40.75 47
200 150 200 200 150 200
HD8202412FM200DIPS HD8202414FM150DIPS HD8202414FM200DIPS HD8202416FM200DIPS HD8202418FM150DIPS HD8202418FM200DIPS
24x20
56
45.25
200
HD8202420FM200DIPS
PAGE #90
PRESSURE CLASS 150
PART # HD8202420FM150DIPS
A 44
B 39
PART # HD8202412FM150DIPS HD8202416FM150DIPS
SIZE 24x20
38 44
PRESSURE CLASS 150 150
23 42.75
SPECIFIED FITTINGS, INC164 W. SMITH RD 483 STEVENSVILLE AIRPORT RD.
BELLINGHAM, WA 98226 STEVENSVILLE, MT 59870
24x16
B
A
SIZE 24x12
www.specfit.com
888-734-8846 (T) 406-777-3466 (T)
888-734-8258 (F) 406-777-7181 (F)
SIZE A B C CLASS
4" 5.25 11 6.56 150
4" 5.25 11 6.56 200
6" 7 14.5 8.6 150
6" 7 14.5 8.6 200
8" 7.5 16.25 10.72 150
8" 7.5 16.25 10.72 200
10" 7 15.5 13.17 150
10" 7 15.5 13.17 200
12" 8.75 19.25 15.97 150
12" 8.75 19.25 15.97 200
14" 9.75 21.25 17.4 150
14" 9.75 21.25 17.4 200
16" 8.5 19.5 19.9 150
16" 8.5 19.5 19.9 200
20" 7.75 18.75 23.66 150
20" 7.75 18.75 23.66 200
24" 7.25 18.25 27.9 150
24" 7.25 18.25 27.9 200
NOTE:
Description: DIPS HDPE WALL ANCHORS Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4" - 24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS 150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #91
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)888-734-8258 (F)
HD6918FM200DIPS
483 STEVENSVILLE AIRPORT RD.
HD69114FM200DIPS
PART #
STEVENSVILLE, MT 59870406-777-3466 (T)406-777-7181 (F)
HD69124FM200DIPS
HD69110FM150DIPS
HD6916FM150DIPS
HD6918FM150DIPS
HD69116FM200DIPS
HD69120FM200DIPS
HD69120FM150DIPS
HD69112FM200DIPS
HD69110FM200DIPS
HD6914FM150DIPS
HD6916FM200DIPS
HD69124FM150DIPS
HD69112FM150DIPS
HD69114FM150DIPS
HD69116FM150DIPS
HD6914FM200DIPS
CL/150 CL/200
SIZE OD A B C PART # PART #
4" 4.8 29.5 21.75 6.5 HD9204FM150DIPS HD9204FM200DIPS
6" 6.9 36.5 28.25 6.75 HD9206FM150DIPS HD9206FM200DIPS
8" 9.05 39.5 31 6.75 HD9208FM150DIPS HD9208FM200DIPS
10" 11.1 42 33 6.75 HD92010FM150DIPS HD92010FM200DIPS
12" 13.2 46.75 35.75 8.25 HD92012FM150DIPS HD92012FM200DIPS
14" 15.3 49.75 38.25 8.5 HD92014FM150DIPS HD92014FM200DIPS
16" 17.4 59 44.75 10.5 HD92016FM150DIPS HD92016FM200DIPS
18" 19.5 64.75 50.25 10.5 HD92018FM150DIPS HD92018FM200DIPS
20" 21.6 76.25 60.75 11 HD92020FM150DIPS HD92020FM200DIPS
24" 25.8 82.25 65.75 11 HD92024FM150DIPS HD92024FM200DIPS
NOTE:
Description: DIPS HDPE FABRICATED WYE Fittings are manufactured and tested to the requirements of ASTM D3035,
PLAIN-ENDS D3261, AWWA C901 or C906, and FM 1613. These fittings are tested to the
Material: HDPE requirements of ASTM D3261 and are compatible for heat fusion with any pipe and
or fitting of compatible resin. Made from PE3408/3608 or
Size: 4"-24" PE4710 material. All raw material shall comply with NSF-61.
CLASS 150, CLASS 200 Other OD's, SDR's and Pressure Ratings available upon request.
PSI RATINGS150, 200 Per FM 1613 and AWWA C906, the working pressure rating equals the pressure class
with an allowance included in the WPR for pressure surge.
Version 1.3, Copyright 2013 FOR DISCLAIMER REFER TO FM DIMENSION CATALOG. PAGE #92
SPECIFIED FITTINGS, INC164 W. SMITH RD
BELLINGHAM, WA 98226888-734-8846 (T)
483 STEVENSVILLE AIRPORT RD.STEVENSVILLE, MT 59870
406-777-3466 (T)406-777-7181 (F)[email protected]
www.specfit.com
888-734-8258 (F)[email protected]