specifications - edge 300 series - karrankarransinks.com/images/pdf/specifications - edge 300...
TRANSCRIPT
ED
GE
SE
RIE
S
Model: E-360R
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Large/small bowl kitchen sink. 32-3/8” x 21-1/8” x 8-3/8” / 6-1/4”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Lowered bowl divider [height - 6-3/4”]. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink.
21-1/8” 18-1/2”
14-3/4” 13-5/8”
16”
32-3/8”
8-3/8”8-3/8”
6-1/4”
6-3/4”
4-1/2”
4-1/2”
7-3/8”
ED
GE
SE
RIE
S
Model: E-350
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Double equal bowl kitchen sink. 32-3/8” x 19” x 8-1/2”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Lowered bowl divider [height - 6-3/4”]. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer baskets shown not included with sink.
19”
14-1/8”
16-1/2” 16-1/2”
14-1/8”
32-3/8”
8-1/2”8-1/2”8-1/2”
6”
7”
ED
GE
SE
RIE
S
Model: E-340
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Extra large single bowl kitchen sink. 30-3/4” x 18-7/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.
16-3/8”18-7/8”
28-3/8”
30-3/4”
9”9”
14-1/8”
5”
ED
GE
SE
RIE
S
Model: E-330
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: D-shaped single bowl kitchen sink. 23-3/8” x 21-1/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.
21-1/8”
21-1/8” 18-3/4”
23-3/8”
9”9”
5”
10-1/2”
ED
GE
SE
RIE
S
Model: E-320
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Single bowl kitchen sink. 24-1/8” x 18-1/8” x 9”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.
21-3/4”
18-1/8” 15-3/4”
24-1/8”
9”9”
4-1/2”
10-7/8”
ED
GE
SE
RIE
S
Model: E-315
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Bar/prep sink. 15-7/8” x 17-7/8” x 8”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.
13-5/8”
17-7/8” 15-5/8”
15-7/8”
8”8”
5-1/2”
6-3/4”
ED
GE
SE
RIE
S
Model: E-310
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Bar/prep sink. 12-7/8” x 14-7/8” x 6-1/2”. Manufactured from Type 304 stainless steel. 18 Gauge. Underside affixed with multiple aluminum coated, high density rubber pads for sound absorption. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 3-1/2”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink.
14-7/8”
12-7/8”
12-3/8”
10-3/8”
6-1/2”6-1/2”
6-1/4”
5-1/4”
ED
GE
SE
RIE
S
Model: E-305
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Vanity sink 15-1/4” x 15-1/4” x 5-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. 1-1/4” x 3/4” machined, resin matrix rim. Waste opening: 1-3/4”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. This sink does not have an overflow.
ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks. 15-1/4”
6-1/2”
13”
6-1/2” 15-1/4”13”
5-3/4”5-3/4”
ED
GE
SE
RIE
S
Model: E-303
Edge Series Sink Installed in Laminate Edge Series Sink Installed in Solid Surface
Karran USA ● 1291 East Ramsey Rd, Vincennes, Indiana 47591 ● T: 866.452.7726 F: 812.885.2440 ● www.karran.com
Shown in LaminateInstallation: Seamless
Shown in Solid SurfaceInstallation: Seamless
Shown in StoneInstallation: 1/8” Overhang
ALL DIMENSIONS ACCURATE TO 1/4”
TOP ELEVATION
FRONT ELEVATION SIDE ELEVATION
Karran, your source for seamless integration
Recommended edge profiles in solid surface
Features and Specifications: Vanity sink 17-1/2” x 14-3/8” x 5-3/4”. Manufactured from Type 304 stainless steel. 18 Gauge. 1-1/4” x 3/4” machined, resin matrix rim.
Waste opening: 1-3/4”. Sink surface has a brushed soft satin finish. Can only be installed in new countertops, not existing countertops with existing sink cutout. Undermount installation required. May not be top mounted. This sink may be bonded seamlessly in solid surface and laminate. This sink may be undermounted to all stone products. 1/8” overhang recommended. Supplied without mounting adhesive, clips or template. Digital templates for CNC machines are available at www.karran.com. Strainer basket shown not included with sink. This sink does not have an overflow.
ADA Compliant when installed per Americans with DisabilitiesAct Accessibility Guidelines, Section 606 Sinks.
17-1/2”
14-3/8”
12-1/4”
15-1/2”
5-3/4”5-3/4”
7-3/4”
3-1/2”