specifications book - cloud object storage | store ...€¦ · base cabinets e1-e34 base cabinets...
TRANSCRIPT
©2015 Masco Cabinetry LLC. Printed in the USA R 11/15
KraftM
aidON
E® S
pecifications Book
SPECIFICATIONS BOOK2016
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
KM1-TMSC1115
20
16
KraftMaidONE® Cabinetry 25 Year Limited Warranty.
KraftMaid® Cabinetry is proud to have earned the KCMA Certification Seal for all door styles.
KraftMaid cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86.
KraftMaid cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA.
All KraftMaid facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
KraftMaid® Cabinetry took on 13 tough KCMA tests and passed them all...Beautifully!
• Shelves and bottoms are loaded at 15 pounds per square foot to ensure no excessive deflection or visible sign of joint separation or failure.
• Mounted wall cabinets are loaded to ensure that the cabinet will accept net loading in compliance with ANSI A161.1–2000 requirements.
• A load of up to 250 pounds is applied against the inside of cabinet fronts to ensure reliable front joints.
• A 3 pound steel ball is “drop tested” against shelves, cabinet bottoms and drawer bottoms to ensure cabinets will withstand dropping of cans and other items.
• Cabinets are impact tested by striking the center of a closed and open door with a 10 pound sand bag.
• Cabinet doors are weighted with 65 pounds and operated 10 times to test the ability of the door and hinges to withstand loading.
• Doors are opened and closed for 25,000 cycles to ensure durability under the stress of normal usage.
• Drawers and drawer mechanisms are tested at 15 pounds per square foot and operated through 25,000 opening and closing cycles to assure durability.
• A 3 pound weight is dropped 10 times against drawer assembly to ensure that drawer front assembly will withstand the impact of closing.
• Cabinets are hot box tested at temperatures up to 120˚F to ensure finish will withstand high heat.
• Cabinets are cycle tested at temperatures ranging from -5˚F to + 120˚F to ensure finish will withstand temperature changes.
• A 24–hour soap and water solution test checks finish ability to withstand exposure to detergents and moisture.
• Finish is exposed to vinegar, grape juice, olive oil, lemon juice, 100 proof alcohol and more to ensure no appreciable discoloration, stain or whitening of the finish.
WARNING: KraftMaid cabinetry product contains chemicals known to the State of California to cause cancer.
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
Masco Cabinetry LLC warrants to the original consumer purchaser that our KraftMaidONE® cabinetry will be free from defects in material and workmanship under normal use for a period of TWENTY-FIVE (25) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.
Masco Cabinetry LLC may elect to repair or replace any defective KraftMaidONE® product covered by our warranty.
THIS WARRANTY DOES NOT COVER:
• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation, storage or handling.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.
Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Limited Lifetime Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.
From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is only valid in the United States of America. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain performance under this warranty, you must contact your KraftMaidONE® supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Masco Cabinetry LLC, Warranty Department, P.O. Box 1055, Middlefield, Ohio 44062
What’s N
ew
Table of Contents
Table of Contents
Index 1-4
Door Styles A1-A10
Finishes B1-B2
Construction Specifications and Options C1-C14 Cabinet Specifications C1-C6 Construction Options C7-C14
Wall Cabinets D1-D26 Wall Cabinets D1-D5 Peninsula Wall Cabinets D6-D7 Wall Corner Cabinets D8-D11 Peninsula Wall Corner Cabinets D12 Wall End Run Cabinets D13 Wall Open Cabinets D14-D15 Wall Microwave Cabinets D16-D17 Wall Hoods D18-D19 Wall Specialty Cabinets D20-D21 Wall Accessories D22-D26
Base Cabinets E1-E34 Base Cabinets E1-E15 Base Appliance Cabinets E16-E17 Base Corner Cabinets E18-E22 Base End Run Cabinets E23 Base Specialty Cabinets E24-E25 Base Accessories E26-E34
Tall Cabinets F1-F6 Tall Cabinets F1-F2 Tall Appliance Cabinets F3 Tall Accessories F4-F6
Vanity Cabinets G1-G12 Vanity Cabinets G1-G9 Vanity Accessories G10-G12
Office Cabinets H1-H4 Office Cabinets H1-H2 Office Accessories H3-H4
Furniture Accessories I1-I4
Universal Cabinets J1-J8
Panels-Shelving-Trays K1-K10 Paneling K1-K2 Shelving K3-K5 Roll-out Trays K6-K7 Roll-out Tray Availabilty Charts K8-K10
Decorative Enhancements L1-L20 Supports and Valances L1 Moldings L2-L10 Molding Accents L11-L14 Decorative Hardware L15-L20
Replacement Parts M1-M26 Hardware M1 Touch-Up M2-M5 Replacement Parts M6-M26
Nomenclature Index N1-N2
Wha
t’s N
ew
i Welcome
New ProductFinishes Page
Truffle Painted Finish B2
Construction Options PagePrepared for Bistro Glass Inserts C10Prepared for Savannah Glass Inserts C10Prepared for Traditional Mullion Glass Inserts C10What’s ChangedThickness on select End Panels, Matching End Panels and Panel Backers has been changed from 3/16” to 5/32” Wall Refrigerator Cabinets with Glass Door option on select sizesFull Depth Shelves now offered with Modified Depth OptionsOverlays (OL) orderable separately for all Full Overlay door styles except Flaxton Replacement PartsThickness on Plywood Ends option (PE) has been changed from 3/8” to 1/2”
What’s DiscontinuedWall CabinetsTambour Storage 36”Fluted Filler Extension 3” Wide- Discontinued in 48”, 54” and 60”Wall Fluted Filler 3” Wide- Discontinued in 21”Wire Stem Glass HolderBase CabinetsBase Blind Corner Lazy Susan Kit (White available)
New
Gray color coding indicates new product, size or code
Watch for this icon highlighting new items
Watch for gray codes and this note highlighting new models or codesBPPS27-2D
What’s New for the KraftMaidONE®product line in 2016
A1A1A1
ITEM PAGE ITEM PAGE
1
ITEM PAGE
11 Full-Width Tray C12
1 Roll-out Tray C11
170 Degree Hinge M7
22 Deep Full-Width Roll-out Trays C13
2 Deep Roll-out Trays C12
2 Full-Width Trays C12
2 Roll-out Trays C11
33 Roll-out Trays C11
3/4 Extension Side Mount Roller Guide Kit M5
3/4 Extension Side Mount Roller Guide
Peninsula Base Kit M5
3/4” Shelf Clip with Stop M9
31 1/2” Vanity Frame Dimensions C4
34 1/2” Vanity Frame Dimensions C5
44 Deep Roll-out Trays C13
4 Roll-out Trays C11
66 Deep Roll-out Trays C13
6 Roll-out Trays C12
AAdjustable Door Buffer Kit M1
Aerosol Can M2
All Plywood Construction – APC C8
Ambridge A2
Angle Crown Molding L3
Angled Outside Corner Molding L4
Antique Iron Knob L17
Antique Pewter Braided Knob L17
Antique Pewter Braided Pull L17
BBase Blind Corner E19
Base Blind Corner Cabinet Information E18
Base Blind Corner Lazy Susan Kit E26
Base Box E32
Base Column E32
Base Combination Drawer (4) E8
Base Combination Drawer (4) w/Two Deep
Full-Width Trays E9
Base Combination Drawer (4) w/Two
Full-Width Trays E9
Base Corner Angle E23
Base Corner Fixed Shelf E22
Base Double Door E1
Base Double Door w/Four Deep Trays E4
Base Double Door w/Four Trays E3
Base Double Door w/Two Deep
Full-Width Trays E3
Base Double Door w/Two Deep
Full-Width Trays – Full Extension E3
Base Double Door w/Two Full-Width Trays E2
Base Double Door w/Two Full-Width
Trays – Full Extension E3
Base End Angle E23
Base End Corner E23
Base End Panel w/Stile E33
Base Filler G11
Base Filler E31
Base Filler Overlay E32
Base Filler Pull-Out E24
Base Fluted Column E33
Base Fluted Filler E32, G11
Base Four Drawer E10
Base Full-Height Double Door E5
Base Full-Height Double Door 12” Deep E5
Base Full-Height Double Door w/
Four Deep Trays E7
Base Full-Height Double Door w/
Four Trays E6
Base Full-Height Double Door w/
Two Deep Full-Width Trays E6
Base Full-Height Double Door w/
Two Full-Width Trays E6
Base Full-Height Single Door E4
Base Full-Height Single Door 12” Deep E5
Base Full-Height Single Door w/Two Deep
Full-Width Trays E6
Base Full-Height Single Door w/Two
Full-Width Trays E5
Base Microwave Cabinet 34” H w/
Deep Bottom Drawer E17
Base Oven Cabinet Universal E16
Base Pantry Pull-Out E24
Base Pots and Pans Storage Two Drawer E9
Base Single Door E1
Base Single Door w/Two Deep Full-Width Trays E2
Base Single Door w/Two Full-Width Trays E2
Base Three Door E2
Base Three Door w/Six Deep Trays E4
Base Three Door w/Six Trays E4
Base Three Drawer E9
Base Top Mount Wastebasket – Double E25
Base Top Mount Wastebasket – Single E24
Base Wastebasket Floor Mount Kit E26
Base Wastebasket ROT Floor Mount Kit E26
Beaded Paneling K2
Bellwether A3
Bi-Fold Hinge M7
Bistro Glass C10
Black Ceramic Insert Pull L20
Black Ceramic Insert Round Knob L19
Bright Chrome Knob L16
Brushed Satin Pewter French Tassel Pull L19
Brushed Satin Pewter French Tassel
Round Knob L19
CCabinet Care Kit M2
Cabinet Front Only C9
Cabinet Specifications C2
Chair Rail L5
Chesterhill A4
Classic Crown Molding L3
Contemporary Base Board L8
Contemporary Crown Molding L3
Copper-Pewter Knob L18
CoreGuard® Panel Backer K2
CoreGuard® Sink Base E10
CoreGuard® Sink Base w/Utensil Tray E11
Countertop Support L1
Countertop Wood Edge L5
Crown Molding L3
Cutlery Divider E29
DDeep Roll-out Trays - Field Installation K7, K10
Deep Roll-out Trays - Full Extension
Field Installation K11
Deep Roll-out Trays – Full Extension Field Installation K7
Deep Sink Base E13
Deluxe Recessed Panel Drawer Front C9
Dentil Molding L9
Depth Modification C9
Desk Door Cabinet – Single H1
Desk Drawer Cabinet H1
Desk End Panel H3
Desk File Drawer Cabinet H2
Index
Index
ITEM PAGE
2
ITEM PAGE ITEM PAGE
Desk Knee Drawer Cabinet H2
Desk Knee Drawer Cabinet – Trimmable H2
Dishwasher Panel E17
Dishwasher Raised Panel E17
Door Mount Towel Bar E28
Door Pantry Rack F5
Door Storage D21
Door Style Information A1
Drawer Organizer Kit E29
Drawer Partition E28
Drop-In Range Panel E16
EEdge Banding M2
Estero Corbel L11
Estero Foot L11
Estero Leg L11
FFace Mount Hinge M7
Fill Stick M4
Filler Extension D24
Finish Terminology B1
Flaxton A5
Flower Knob L18
Fluted Filled Extension D25
Foil Box Rack E27
Fox Pointe A6
Full Extension Heavy Duty Under Mount
Guide Set M6
Full Extension Side Mount Ball Bearing
Guide Kit M5
Full Extension Under Mount Guide Kit M6
Full Extension Under Mount Peninsula
Base Guide Kit M6
Full Overlay – Concealed Hinges C1
Full Overlay 4 Way Hinge M8
Full Overlay 6 Way Hinge M8
Furniture Component Design Idea I1
Furniture End Panel – Center Drilled I2
Furniture End Panels I1
Furniture Shelves I2
Furniture Shelves – Heavy-Duty I2
Furniture Shelves – Top and Bottom I3
Furniture Toeboard Valance I3
Fusilli Pull L19
GGalley Rail L9
Glass Retainer M10
Glenmoor A7
HHardware Template Kit M1
Heat Shield E31
IInset Light Rail L5
Inside Corner Molding L4
Installation Screws M10
LLarge Starter Molding L4
Lattice Wall D15
Lazy Susan E21
Lazy Susan Angle E22
Library Molding L6
Locking Device - Full Extension Heavy
Duty Under Mount Guides M6
MMatching Base End Panel E33
Matching Desk End Panel H3
Matching Interior C8
Matching Tall End Panel F7
Matching Vanity End Panel G11
Medicine Cabinet Pack Hinge M9
Mirror Cabinet G9
Mirror Molding L6
Modern Satin Nickel Knob L18
Molding Stack Information L2
NNarrow Batten Molding L5
Nickel Knob L16
OOchre Finished Ceramic Totem Knob L21
Ochre Finished Ceramic Totem Pull L21
Office Frame Dimensions C6
Oil Rubbed Bronze Cup Pull L20
Oil Rubbed Bronze Round Knob L20
Open Cube Organizer D23
Organizer H3
Outside Corner Molding L4
Oven Cabinet – Single w/3” Stiles F3
Oven Cabinet – Universal F3
Oven Cabinet Frame Dimensions C3
Oven Cabinet Support Platform F6
Oven Drawer Kit F4
PPantry Cabinet F2
Pantry Cabinet Shelf Kit F5
Partial Overlay – Concealed Hinges C1
Pegged Deep Drawer Organizer E30
Peninsula Base Blind Corner Double Door E20
Peninsula Base Blind Corner Single Door E19
Peninsula Base Blind Corner w/Two Deep
Full-Width Trays E20
Peninsula Base Blind Corner w/Two
Full-Width Trays E20
Peninsula Base Double Door E8
Peninsula Base Double Door w/Two Deep
Full-Width Trays E8
Peninsula Base Double Door w/Two
Full-Width Trays E8
Peninsula Base Single Door E7
Peninsula Base Single Door w/Two Deep
Full-Width Trays E7
Peninsula Base Single Door w/Two
Full-Width Trays E7
Plain Square Posts L14
Plywood Ends – PE C7
Premium Paint w/Glaze Finishes B2
Premium Painted Finishes B2
Premium Stain w/Glaze Finishes B3
QQuarter Round Molding L7
RRadius Cabinet Molding L5
Rear Adjustment Adapter - Full Extension
Heavy Duty Under Mount Soft Action+™
Guides M7
Removable Sink Front E15
Replacement Shelving–Base K4
Replacement Shelving–Tall K5
Replacement Shelving–Vanity K5
Replacement Shelving–Walls K4
Rexton A8
Roll-out Trays - Field Installation K6, K8
Inde
x
Index
A3A3A33
ITEM PAGE ITEM PAGE ITEM PAGE
Roll-out Trays Double Faced -
Field Installation K6, K10
Roll-out Trays Solid Wood -
Field Installation K7, K9
Roman Spindles L14
Rope Molding L9
SSatin Aluminum Boat Cleat Transitional Pull L16
Satin Aluminum Knob L16
Satin Nickel Canoe Pull L18
Satin Nickel Diminishing Knob L21
Satin Nickel Football Shaped Knob L19
Satin Nickel Rope Knob L15
Satin Nickel Rope Pull L15
Satin Nickel Round Knob L17
Satin Nickel Suitcase Pull L15
Satin Nickel Traditional Pull L17
Satin Nickel Wavy Pull L21
Satin Nickel Wire Cable Pull L18
Savannah Mullion Glass C10
Scribe Cove Molding L7
Scribe Molding L7
Shelf Kits K3
Shelf Support Center M9
Shoe Molding L8
Single Bead Pilaster L8
Single Bead Round Edge L6
Sink Base Angle E13
Sink Front E14
Sink Front Angle E14
Sink Front Angle Floor E31
Sink Front Angle Full-Height E14
Sink Front Floor E31
Sink Front Full-Height E14
Sliding Towel Bar E28
Small Starter Molding L4
Soffit Crown Molding L3
Solid Bright Brass Knob L16
Solid Wood Stock L10
Solid Wood Wall End Open Shelf D13
Spice Drawer Cabinet D20
Spice Drawer Insert Kit E29
Spindles L14
Standard Stain Finishes B1
Swing-Out Pantry Rack F5
TTall End Panel F7
Tall End Panel w/Stile F7
Tall Filler F6
Tall Filler Overlay F6
Tall Fluted Filler F6
Tall Frame Dimensions C4
Talmadge A9
Tambour Storage D20
Tapered Leg L13
Tapestry Corbel L12
Tapestry Foot L12
Tapestry Insert Molding L9
Tapestry Leg L12
Toe Kick E30
Toe Kick Backer E30
Touch-Up Kit M3
Touch-Up Pen M4
Touch-Up Quart M3
Traditional Base Board L8
Traditional Mullion Glass C10
Traditional Overlay 2 Way Hinge M8
Traditional Overlay 6 Way Hinge M8
Traditional Pull L22
Tri-View Mirror G9
Triple Bead Edging L6
Triple Bead Pilaster L8
Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull L20
Tumbled Dark Gunmetal Round Knob L20
UUnder Cabinet Molding L6
Under Sink Tote E27
Universal Access Panel E15
Universal Base Double Door J1
Universal Base Double Door w/Four Deep Trays J3
Universal Base Double Door w/Four Trays J3
Universal Base Double Door w/Two Deep
Full-Width Trays J2
Universal Base Double Door w/Two
Full-Width Trays J2
Universal Base Full-Height Double Door J5
Universal Base Full-Height Double Door w/
Four Deep Trays J6
Universal Base Full-Height Double Door w/
Four Trays J5
Universal Base Full-Height Double Door w/
Two Deep Full-Width Trays J5
Universal Base Full-Height Double Door w/
Two Full-Width Trays J5
Universal Base Full-Height Single Door J4
Universal Base Full-Height Single Door w/
Two Deep Full-Width Trays J4
Universal Base Full-Height Single Door w/
Two Full-Width Trays J4
Universal Base Pull-out Table J3
Universal Base Pull-Out Table w/
Two Deep Full-Width Trays J4
Universal Base Pull-Out Table w/
Two Full-Width Trays J3
Universal Base Single Door J1
Universal Base Single Door w/Two Deep
Full-Width Trays J2
Universal Base Single Door w/Two
Full-Width Trays J2
Universal Base Three Drawer J6
Universal Design Frame Dimensions C6
Universal Lazy Susan J6
Universal Removable Sink Front J7
Universal Sink Front Doors J6
Universal Sink Front Kit J7
Universal Toe Kick J7
Utensil Tray Kit E30
Utility Cabinets 12” Deep F1
Utility Cabinets 24” Deep F2
Utility Tray Hinge M9
VValance Raised Panel L1
Valance Shaker L1
Valance Traditional L1
Vanity Base Double Door G5
Vanity Base Drawer G7
Vanity Base Four Drawer G7
Vanity Base Full-Height Double Door G6
Vanity Base Full-Height Four Door G6
Vanity Base Full-Height Single Door G5
Vanity Base Full-Height Three Door G6
Vanity Base Single Door G5
Vanity Combination Drawer (2) G3
Vanity Combination Drawer (3) G3
Vanity Combination Drawer (6) G4
Vanity Combination Drawer (8) G4
Vanity Filler G10
Vanity Fluted Filler G10
Vanity Hamper Roll-Out G10
Vanity Linen Cabinet G7
Vanity Linen Cabinet Short G8
Vanity Sink Base Double Door G1
Vanity Sink Base Four Door G2
Vanity Sink Base Four Drawer G3
Vanity Sink Base Three Door G2
Vanity Sink Base Three Drawer G2
Vanity Sink Base Two Drawer G2
Vanity Tall Dimensions C5
Index
Index
ITEM PAGE
4
ITEM PAGE ITEM PAGE
Vanity Wall Boutique G8
Vanity Wall Boutique w/Towel Bar G8
Vanity Wall Cabinet G8
Venetian Bronze Copper French Lace Knob L21
Vent Clip Pack M10
WWall and Base Frame Dimensions C3
Wall Corner Angle D13
Wall China Display D15
Wall End Corner D13
Wall Filler D24
Wall Hood Classic Chimney D18
Wall Hood Cove Chimney D19
Wall Hood Front D18
Wall Microwave Cabinet D16
Wall Microwave Shelf D17
Wall Microwave Shelf Cabinet D17
Wall Open Cabinet D14
White Ceramic Knob L15
Wide Scribe Molding L7
Windmere Corbel L13
Windmere Foot L13
Windmere Leg L13
Windmere Rope Molding L9
Wall Wine Rack Scalloped D15
Wire Tray Divider Kit E27
Wire Tray Divider Roll-out E27
Wood Lazy Susan E21
Wood Sink Base E11
Wood Sink Base 27” Deep E12
Wood Sink Base 27” Deep w/Utensil Tray E12
Wood Sink Base Full-Height E12
Wood Sink Base w/Utensil Tray E12
Wood Veneer Paneling K1
Woodgrain Laminate Paneling K1
Inde
x
Index
A1Finish and Door Styles Information A1
Door Styles
Door Styles
Wood Species Cherry is a rich multi-colored hardwood, often used in fine furniture. In its raw state, cherry has pinkish-brown hues with occasional shades of
white, green, pink or grey. It may also contain small knots, pin holes and cherry fissures. A cherry fissure is a small crack that occurs naturally in the wood; it will not get bigger over time. Natural or light stains accent the color variations and characteristics in cherry, while dark stains soften its complexity. All cherry wood naturally darkens or “mellows” with age.
Maple is a strong wood that is primarily off-white in its raw state. However, maple sometimes contains light hues of yellow-brown and pink as well as light tan or reddish-tinged streaks that darken with stain. Typically straight-grained, maple can be wavy or even curly. Hard maple offers more uniformity than other wood types, making it ideal for living spaces that feature a clean, streamlined appearance.
Oak is a strong, open-grained wood that ranges in color from white to yellow to reddish brown. Oak is sometimes streaked with green, yellow or black mineral deposits.
Cherry Maple Oak
A2
Doo
r Sty
les
A2A2
Ambridge • Solid wood door frame with 2 3/16” stiles and rails • Square design has veneer v-groove recessed panel on
wall and base doors • 5-piece drawer front with veneer v-groove recessed
panel • Grooves are 1 1/2” on center • Concealed hinge • Decorative hardware is required • Savannah Mullion Glass (SV) and Prepared for
Savanah Mullion Glass (_SV.PREP_) option available on select cabinets. See specific cabinet for availability
Full Overlay
AF6C1 Cherry AF6M1 Maple
Door Styles
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Stain w/Glaze Finishes*Allspice w/Ebony Glaze (C54M)Natural w/Java Glaze (C62M)Toasted Sesame w/Java Glaze (C69M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Painted w/Traditional Glaze Finishes*Brie w/Pumpkin Glaze (C56M)Brie w/Tuscan Glaze (C57M) Meringue w/Tuscan Glaze (C60M)
Stain w/TraditionalGlaze Finishes*Strudel w/Java Glaze (C67C)
*All available with an upcharge
°
°
A3Door Styles
Door Styles
A3 Door Styles
Bellwether • Solid wood mitered door frame with 2 3/16” stiles and rails • Square design has veneer recessed panel on wall and base
doors • 5-piece mitered drawer front with solid wood recessed panel • Solid wood drawer frame with 2 3/16” stiles and rails, except
drawer fronts 4 1/8” tall or less, which have 1 1/2” stiles and rails
• Concealed hinge • Decorative hardware is required • Bistro Glass (BIS) and Prepared for Bistro Glass option (_DRS.PREP_) available on select cabinets. See specific
cabinet for availability
Full Overlay
AF5C1 Cherry AF5M1 Maple
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Stain w/Glaze Finishes*Allspice w/Ebony Glaze (C54M)Natural w/Java Glaze (C62M)Toasted Sesame w/Java Glaze (C69M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Painted w/Traditional Glaze Finishes*Brie w/Pumpkin Glaze (C56M)Brie w/Tuscan Glaze (C57M) Meringue w/Tuscan Glaze (C60M)
Stain w/TraditionalGlaze Finishes*Strudel w/Java Glaze (C67C)
*All available with an upcharge
°
A4 A4Door Styles
Full Overlay
AF7C1 Cherry AF7M1 Maple
Chesterhill • Solid wood door frame with 2 7/8” stiles and rails • Square design has veneer recessed center panel with solid
wood applied molding on wall and base doors • 5-piece drawer front with solid wood panel and solid wood
applied molding • Solid wood drawer frame with 2 7/8” stiles and 1 1/2” rails,
except drawer fronts 4 1/8” tall or less are slab; 9 3/4” tall or greater have 2 7/8” stiles and rails
• Concealed hinge • Decorative hardware is required • Bistro Glass (BIS) and Prepared for Bistro Glass option (_DRS.PREP_) available on select cabinets. See specific
cabinet for availability
Doo
r Sty
les
Door Styles
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Stain w/Glaze Finishes*Allspice w/Ebony Glaze (C54M)Natural w/Java Glaze (C62M)Toasted Sesame w/Java Glaze (C69M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Painted w/Traditional Glaze Finishes*Brie w/Pumpkin Glaze (C56M)Brie w/Tuscan Glaze (C57M) Meringue w/Tuscan Glaze (C60M)
Stain w/TraditionalGlaze Finishes*Strudel w/Java Glaze (C67C)
*All available with an upcharge
°
A5
Door Styles
Door Styles
Flaxton • Square design has veneer slab on wall and base doors • Slab drawer front is veneer • Doors have vertical grain; drawer fronts have horizontal
grain • Concealed hinge • Decorative hardware is required • Wall glass doors feature solid wood stiles and rails • Bistro Glass (BIS) and Prepared for Bistro Glass option (_DRS.PREP_) available on select cabinets. See specific
cabinet for availability
Full Overlay
AF3C1 Cherry AF3M1 Maple
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
*All available with an upcharge
A6
Doo
r Sty
les
Door Styles
Fox Pointe • Solid wood door frame with 2 3/16” stiles and rails • Square design has veneer raised panel on wall and base doors • Slab drawer front is solid wood • Concealed hinge • Decorative hardware is required • Bistro Glass (BIS), Traditional Mullion Glass (MD), Prepared
for Bistro Glass (_DRS.PREP_) and Prepared for Traditional Mullion (_MD.PREP_) options available on select cabinets. See specific cabinet for availability
Full Overlay
AE7C1 Cherry AE7M1 Maple
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Stain w/Glaze Finishes*Allspice w/Ebony Glaze (C54M)Natural w/Java Glaze (C62M)Toasted Sesame w/Java Glaze (C69M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Painted w/Traditional Glaze Finishes*Brie w/Pumpkin Glaze (C56M)Brie w/Tuscan Glaze (C57M) Meringue w/Tuscan Glaze (C60M)
Stain w/TraditionalGlaze Finishes*Strudel w/Java Glaze (C67C)
*All available with an upcharge
°
A7
Door Styles
Glenmoor • Solid wood mitered door frame with 2 3/16” stiles and rails • Square design veneer recessed panel on wall and base doors • Slab drawer front is solid wood • Concealed hinge • Decorative hardware is optional • Bistro Glass (BIS), Traditional Mullion Glass (MD), Prepared
for Bistro Glass (_DRS.PREP_) and Prepared for Traditional Mullion (_MD.PREP_) options available on select cabinets. See specific cabinet for availability
Partial Overlay
AF1C1 Cherry AF1M1 Maple AF1O1 Red Oak
Door Styles
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Red Oak
Standard StainsNatural (C61O)Pepper (C63O)Pumpernickel (C65O)Strudel (C66O)
*All available with an upcharge
°
A8
Doo
r Sty
les
Rexton • Solid wood door frame with 3˝ stiles and rails • Square design has veneer recessed panel on wall and base
doors • Slab drawer front is solid wood • Deluxe Recessed Panel Drawer (DRPD) front available • DRPD drawer front with solid wood 3” stiles and 1 1/2”
rails and solid wood center panel except for 9 3/4” tall or taller which have 3” rails
• Concealed hinge • Decorative hardware is required • Bistro Glass (BIS), Traditional Mullion Glass (MD), Prepared
for Bistro Glass (_DRS.PREP_) and Prepared for Traditional Mullion (_MD.PREP_) options available on select cabinets. See specific cabinet for availability
Full Overlay
AF2C1 Cherry AF2M1 Maple
Door Styles
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Stain w/Glaze Finishes*Allspice w/Ebony Glaze (C54M)Natural w/Java Glaze (C62M)Toasted Sesame w/Java Glaze (C69M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Painted w/Traditional Glaze Finishes*Brie w/Pumpkin Glaze (C56M)Brie w/Tuscan Glaze (C57M) Meringue w/Tuscan Glaze (C60M)
Stain w/TraditionalGlaze Finishes*Strudel w/Java Glaze (C67C)
*All available with an upcharge
°
Optional DRPD
A9
Door Styles
Talmadge • Solid wood door frame with 2 7/8” stiles and rails • Square design has veneer recessed panel on wall and
base doors • Slab drawer front is solid wood • Full overlay door design • Concealed hinge • Decorative hardware is required • Bistro Glass (BIS), Savannah (SV), Prepared for Bistro
Glass (_DRS.PREP_) and Prepared for Savannah (_SV.PREP_) options available on select cabinets. See specific cabinet for availability
Full Overlay
AE6C1 Cherry AE6M1 Maple AE6O1 Red Oak
Door Styles
Cherry
Standard StainsPumpernickel (C65C)Strudel (C66C)
Maple
Standard StainsAllspice (C53M)Chutney (C58M)Natural (C61M)Pepper (C63M)Poppy Seed (C64M)Pumpernickel (C65M)Toasted Sesame (C68M)
Maple (cont.)
Painted Finishes*Brie (C55M)Meringue (C59M)Truffle (D76M)
Red Oak
Standard StainsNatural (C61O)Pepper (C63O)Pumpernickel (C65O)Strudel (C66O)
*All available with an upcharge
°
A10
Doo
r Sty
les
Notes
Door Styles
Finishes
B1Finishes
Finish Terminology - End Grain End grain surfaces and softer areas of the wood may accept more stain and
often appear darker than other surfaces. This is a natural reaction when finishing wood products and potential variances cannot be controlled.
- Joint Lines Since wood is in a constant state of expansion and contraction, visible lines
are normal at the joints on the cabinet face frames and doors. This does not weaken the finish or the strength of the joint.
- Telegraphing All wood species show some wood grain. The amount of grain will vary
by species and finish. Oak is an open or coarse grain wood. The grain will “telegraph” or visibly show through the stain. Maple is a closed or fine grain wood. Some “telegraphing” will occur, though the effect will be subtle.
- Semi-Opaque Color Finishes Semi-opaque finishes feature a heavily pigmented stain utilizing a hand-
applied process. They are semi-opaque, which may telegraph some of the natural beauty of wood. Joint lines and telegraphing may occur with any semi-opaque finish.
Wood products, including cabinet doors and face frames, are typically affected by environmental conditions. Color variation over time, as well as normal movement due to wood’s expansion and contraction is part of the natural beauty of wood. This normal movement may cause hairline cracks in the finish surface at the joints and is considered a normal characteristic of semi-opaque or painted finishes. This will not be considered a reason for product replacement.
Note: Based on independent testing, discoloration will occur to doors, drawers and cabinet parts after prolonged exposure to tobacco smoke. This is especially noticeable on white and other lighter finishes. However, KraftMaid Cabinetry does not warranty any of its finishes against discoloration due to exposure to smoke.
Standard Stains(Available as Standard) - Stain Finish Process Stained finishes truly showcase the natural beauty and characteristics
inherent in each individual wood species. Based on the stain color chosen, a toner may be applied to the wood to equalize natural sap levels. The stain color is applied and hand-rubbed to ensure full and equal color coverage for doors and drawer fronts.
Finish availability may vary by door style. See Finish Availability Chart - Allspice Rich medium brown Available on Maple door styles - Chutney A deep dark burgundy finish Available on Maple door styles - Natural Two coats of clear, colorless topcoat on unstained wood Available on Maple and Oak door styles - Pepper Deep semi-transparent dark brown Available on Maple and Oak door styles - Poppy Seed A sheer, rich grey stain that enhances the beauty of the woodgrain Available on Maple door styles - Pumpernickel A warm, rich brown finish with deep brown undertones and black overtones Available on Cherry, Maple and Oak door styles - Strudel A rich golden brown finish Available on Cherry and Oak door styles - Toasted Sesame A golden finish with yellow overtones Available on Maple door styles
Cher
ry
Map
le
Oak
Allspice ●
Allspice w/Ebony Glaze ✩
Brie ✛
Brie w/Pumpkin Glaze ✩
Brie w/Tuscan Glaze ✩
Chutney ●
Meringue ✛
Meringue w/Tuscan Glaze ✩
Natural ● ●
Natural w/Java Glaze ✩
Pepper ● ●
Poppy Seed ●
Pumpernickel ● ● ●
Strudel ● ●
Strudel w/Java Glaze ✩
Toasted Sesame ●
Toasted Sesame w/Java Glaze ✩
Truffle ✛
● Available as standard
✛ Available at a premium upcharge
✩ Available on select door styles at a premium upcharge
Wood Species and Finish Availability Chart
Fini
shes
B2 Finishes
Premium Painted Finishes(Available at a Premium Upcharge) - Painted Finish Process Painted finishes feature rich, beautiful color while allowing some of the
natural beauty of the wood to show. Several coats of rich, semi-opaque paint coat the wood using an automated
application process. Natural wood characteristics such as gum pockets, streaks and pin knots may
be visible, particularly with some of our lighter paints. These characteristics tend to be more pronounced on the backs of our doors and drawers.
Since wood naturally expands and contracts, you may see hairline separation in the finish surface at the joints. Joint lines are normal and do not affect the strength of the door’s construction.
Painted finishes are available only on maple due to the more uniform appearance and smooth, clean characteristics of this wood.
- Brie Creamy white painted finish Available on Maple door styles - Meringue White painted finish Available on Maple door styles - Truffle Grey painted finish Available on Maple door styles
Gray color coding indicates new product, size or code.
Premium Stain w/Glaze Finishes (Available at a Premium Upcharge) - Stain w/Glaze Finish Process The base stain is applied followed by the application of a glaze finish to the
entire door or drawer front to add richness and warmth to wood surfaces. The glaze is hand-applied to detail the recesses of applicable door and drawer
designs. As a final step, a heat activated topcoat is applied to provide a beautiful and
durable furniture finish. Each door design, wood species and glaze finish has its own charming
character and will create a unique one-of-a-kind look. Finish availability may vary by door style. See Finish Availability Chart. - Allspice w/Ebony Glaze Rich medium brown with charcoal (black) glaze Available on select Maple door styles - Natural w/Java Glaze Clear sealer and topcoat with dark brown glaze Available on select Maple door styles - Strudel w/Java Glaze A rich golden brown finish with dark brown glaze Available on select Cherry door styles - Toasted Sesame w/Java Glaze A golden finish with yellow undertones and dark brown glaze Available on select Maple door styles
Premium Paint w/Glaze Finishes(Available at a Premium Upcharge) - Painted w/Glaze Finish Process Several coats of rich, semi-opaque paint are applied and allowed to saturate
the hardwood developing richness. Natural wood characteristics such as gum pockets, streaks and pin knots may be visible, particularly with some of the lighter paints. These characteristics tend to be more pronounced on the backs of doors and drawers.
After the painting process is performed, a glaze finish is applied to the entire surface to add warmth. The glaze is then hand-wiped to create soft, light “hang up” in profiles and recesses of the wood
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish.
Each door design, wood species and glaze finish has its own charming character and will create a unique one-of-a-kind look.
Finish availability may vary by door style. See Finish Availability Chart. - Brie w/Pumpkin Glaze Creamy white painted finish with brown glaze Available on select Maple door styles - Brie w/Tuscan Glaze Creamy white painted finish with light grey glaze Available on select Maple door styles - Meringue w/Tuscan Glaze Painted white painted finish with light grey glaze Available on select Maple door styles
C1Cabinet Specifications
Specifications and Options
Cabinet Specifications
Full Overlay – Concealed Hinges
• Full Overlay doors leave 3/16˝ of the cabinet’s face frame exposed on either side of the doors and 3/8” exposed between doors
• Butt door cabinets have 1/8” reveal between doors • Nickel-finished, self-closing hinges, 6-way adjustable to allow
for perfect alignment • The reveals shown here may vary slightly on some cabinets
due to actual door/drawer front sizes used. Refer to the replacement part section of the book for actual door/drawer sizes for specific cabinets
⁄" reveal
⅜" reveal
top view
side view
⁄" ⁄"
⅜"
⅜" ⅜"
⅜"
⅜"
Partial Overlay – Concealed Hinges
• Partial overlay doors leave 7/8” of the cabinet’s face frame exposed on either side of the doors and 1 3/4” exposed between doors
• Butt door cabinets have 1/8” reveal between doors • Nickel-finished, self-closing hinges, 6-way adjustable to allow
for perfect alignment • The reveals shown here may vary slightly on some cabinets
due to actual door/drawer front sizes used. Refer to the replacement part section of the book for actual door/drawer sizes for specific cabinets
⅞" reveal
1¾" reveal
⅞"⅞"
top view
side view
1"
1"
1"
1"
1"
C2 Cabinet Specifications
Spec
ifica
tion
s and
Opt
ions
Cabinet Specifications
• (1) 3/8” (Wall) or 1/4” (Tall) engineered wood with natural woodgrain laminate clad back panel unless otherwise noted
• (2) 3/8” (Wall) or 1/4” (Tall) engineered wood hanging rail • (3) 1/2” thick engineered wood ceiling with natural
woodgrain laminate • (4) 3/4” thick solid hardwood front frame constructed
using industrial grade glue and hardened steel fasteners. Front frame species complements selected door style.
• (5) Extensive and unique door style and wood species selection in Cherry, Maple and Oak. Solid and wood veneer construction available.
• (6) Clear Polycarbonate shelf rests for all cabinets. Easily adjustable positive locking shelf clips for all cabinets. Double door wall cabinets use non-locking clips on the frame center stile.
• (7) Natural woodgrain laminate interior. • (8) 3/4” fully adjustable woodgrain laminate shelving is a
standard feature in wall, base and tall cabinets. • (9) 1/2” thick engineered wood floor with natural
woodgrain laminate. • (10) 3” solid hardwood center stile except on BUTT door
cabinets. Exterior is finished to match door; interior is unfinished.
• (11) 1/2” engineered wood corner gussets dadoed and glued to cabinet corners.
• (12) 1/4” thick engineered wood Base and Vanity back panel with natural woodgrain laminate on interior side
• (13) 11/16” thick x 2 1/4” wide solid Pine or Douglas Fir installation rail on Base and Vanity Cabinets.
• (14) Standard drawer runners with adjustable front corners and a 75 pound load capacity feature full extension, concealed under-mount slide system with SoftAction+* closing mechanism that allows the drawer to gently close.
• (15) 3/4” thick, solid wood, full-depth, dovetailed drawer featuring four sided construction and 5.2mm plywood bottom. Drawers 30” and wider have 3/8” plywood cleat underneath for additional support.
• (16) Self-closing, concealed, 6-way adjustable hinges on most doors.
• (17) 3/4” thick, full-depth, fully adjustable engineered wood shelving with natural woodgrain laminate.
• (18) Drawer heads are solid hardwood or wood veneer to complement each door style.
• (19) Fully closed toe space area: Standard Toespace: 4 1/2” tall x 2 25/32” deep. Universal Toespace: 5 1/2” tall x 2 25/32” deep. • (20) 3/8” thick (Wall, Base and Vanity) or 1/2˝ thick (Tall)
engineered wood side panels with natural woodgrain laminate to match door and frame.
• * See inside cover for warranty details
8
7
3
2
1
4
10
9
5
6
12
14
20
13
15
19
17
18
6
16
Concealed Hinge
11
C3Cabinet Specifications
Specifications and Options
B
3"
*5"
30"*20 1⁄2"
4 1⁄2"
+3"
+3"
BD•3
*5"
*9 3⁄8"
*9 5⁄8"
B•FH
*27"
BMC
*17 1⁄2"
*15 7⁄8"
*9 1⁄8"
DSB BD•4
*5"
*5"
*5"
*8"
1 1⁄2" Countertop
12" 39" 36" 30" 27" 23 1⁄2" 20 1⁄2" 18" 15"
*36"*33"*27"*24"*20 1⁄2"*17 1⁄2"*15"*12"*9"
Wall Cabinet Heights 42"
*39"
11"
2"
B•2
*12"
*12"
2 1⁄2"
1 3⁄4"
34 1⁄2"
DOS
*15 ½˝
1 3⁄4"
1 1⁄4"
Wall and Base Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates
stiles are removed on butt door cabinets
Oven Cabinet Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates
stiles are removed on butt door cabinets • OC cabinets with stain have 1 1/2” face frame stiles. Brie and
Meringue will have 3” face frame stiles
* 20 1 ⁄2"* 20 1 ⁄2"
3"* 20 1 ⁄2"
90"
* 15"
84"
OC_S
* 21" min. width * 25" max. width
* 24" * 27"
93"
3"* 20 1⁄2"
90"
* 15"
84"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
OC_S
Oven Cabinet Single Heights
* 21" min. height * 38" max. height
* 24" min. width * 28" max. width
* 21" min. width * 25" max. width
* 27" min. width * 31" max. width * 21" min. width
* 25" max. width* 24" min. width * 28" max. width
* 27" min. width * 31" max. width
* 21" min. width * 25" max. width
* 211 ⁄2" min. height * 381 ⁄2" max. height
* 21" min. height * 38" max. height
* 21" min. height * 38" max. height
* 233 ⁄4" min. height* max height dependentupon desired shelf count
* 233 ⁄4" min. height
* max height dependent
upon desired shelf count
* 233 ⁄4" min. height* max height dependentupon desired shelf count
* 241 ⁄4" min. height* max height dependentupon desired shelf count
OC_U OC_U OC_U
Oven Cabinet Universal Heights
13⁄4"13⁄4"
* 24"
* 20 1 ⁄2"
93"
OC_S
* 27"
* 20 1 ⁄2"
96"
OC_S
96"
OC_U
13⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
13⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
41⁄2"
791⁄2"851⁄2"881⁄2"911⁄2"
3"
C4 Cabinet Specifications
Spec
ifica
tion
s and
Opt
ions
Tall Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2”
wide • 3” wide vertical stiles divide double door cabinets
3"
2"
*24"
*59 1⁄2"
93"
3"
*59 1⁄2"
*20 1/2"
90"
3"
2"
*59 1⁄2"
*15"
84"
2"
*27"
96"
2 1⁄2"
*20 1/2"
90"
2"
*15"
84"
Tall Cabinet Heights
3"
2"
*27"
*59 1⁄2"
96"
2"
*24"
93"
4 1⁄2"
79 1⁄2"85 1⁄2"88 1⁄2"91 1⁄2"
*59 1⁄2"*59 1⁄2"*59 1⁄2"*59 1⁄2"
2 1⁄2"
U152484 U152490 U152493 U152496 U302484BUTT U302490BUTT U302493BUTT U302496BUTT
31 1/2” Vanity Frame Dimensions
30"
VSB
*5"
*17 1⁄2"
4 1⁄2"
27"
VD•3
*5"
*8"
*8"
*20 1⁄2"
*5"
1 1⁄2" Countertop
48"*45"
VSB•2
*5"
*17 1⁄2"
*5"
3" 3" 3"
4 1⁄2" 4 1⁄2"
VSB•2
*5"
*17 1⁄2"
*8"
*8"
VCD•2
*5"
*17 1⁄2" 3"
*5"
VWB2430 VLC1848
+ 311⁄2˝
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2”
wide • 3” wide vertical stiles divide double door cabinets
C5Cabinet Specifications
Specifications and Options
34 1/2” Vanity Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, +
indicates stiles are removed on butt door cabinets
*8"
*5"
*20 ½˝ *20 ½˝ *20 ½˝ *20 ½˝*5"3"
*5"
*45"
*20 ½˝
*5"
30"
4 ½˝
*5" *5"
*5"
*5"
1 ½˝ Countertop
*5" *5"
3" 3" 3"
4 ½˝ 4 ½˝ *5" *5"
*8"
30" 48"
VWB2430BUTT VLC1848
VCD•3 VSB•2 VSB•2 VSB VD•4
+ 34 ½˝
1 1⁄4"1 1⁄4"
Vanity Tall Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide
2"
*27"
*59 1⁄2"
96"
21/2"
*20 1/2"
*59 1⁄2"
90"
2"
*15"
*59 1⁄2"
84"
Vanity Linen Cabinet Heights
4 1⁄2"
79 1⁄2"85 1⁄2"91 1⁄2"
VLC151884 VLC151896VLC151890
C6 Cabinet Specifications
Spec
ifica
tion
s and
Opt
ions
Office Frame Dimensions
DDRDKDT
*5"
*5"
*8"
DFD
*5"
*15"
5 ⁄˝
4 ½˝
24 ½˝
*18"
*39"
WOC
1 ½˝ Countertop
2"
4 ½˝ 4 ½˝
⁄˝
*3"
29˝
60˝
Universal Design Frame Dimensions
UBD•3
*8"
*8"
UBT
*4 ½˝
UB•FH
27"
UB•FH
*24" *24"
1 1⁄2" Countertop
UB
+3"
+3"
*5" *5"
*17 ½˝ *17 ½˝
5 ½˝
2" 32 ½˝
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2”
wide • 3” wide vertical stiles divide double door cabinets
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2”
wide • 3” wide vertical stiles divide double door cabinets
C7Construction Options
Specifications and Options
Construction Options
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Use the option availability chart at the right of each item to determine which construction options are available for your desired cabinet.
Material dimensions may vary slightly based on lumber industry standards.
Specification subject to change without notice.
PE - - - - - - - Plywood Ends APC - - - - - - All Plywood Construction RD9 - - - - - - Reduce Depth 9” RD12 - - - - - Reduce Depth 12” RD15 - - - - - Reduce Depth 15” RD18 - - - - - Reduce Depth 18” RD21 - - - - - Reduce Depth 21” ID15- - - - - - Increase Depth 15” ID18- - - - - - Increase Depth 18” ID21- - - - - - Increase Depth 21” ID24- - - - - - Increase Depth 24” BIS - - - - - - - Bistro Glass MD - - - - - - Traditional Mullion Glass SV - - - - - - - Savannah Mullion Glass 1ROT - - - - - 1 Roll-out Tray 2ROT - - - - - 2 Roll-out Trays 3ROT - - - - - 3 Roll-out Trays 4ROT - - - - - 4 Roll-out Trays 6ROT - - - - - 6 Roll-out Trays 1FWROT - - 1 Full Width Tray 2FWROT - - 2 Full Width Trays 2DROT- - - - 2 Deep Roll-out Trays 4DROT- - - - 4 Deep Roll-out Trays 6DROT- - - - 6 Deep Roll-out Trays 2DFWROT - 2 Deep Full Width Roll-out Trays MI - - - - - - - Matching Interior CFO - - - - - - Cabinet Front Only
Plywood Ends – PE
PE Full Kitchens
PEB Individual Cabinets
• This construction option affects end panels only
• Available for full or partial kitchen orders
• To order a full kitchen with Plywood Ends, use PE in the header of your order
• To order individual line items with Plywood Ends, dash each line item with PEB; Example: W3030 BUTT-PEB
• 1/2” plywood end panels are available for most cabinets and have a wood veneer exterior and woodgrain interior
• Consult the Plywood Ends (PE) option box for your desired cabinet
• Shelves, ceilings and floors are engineered wood with a natural woodgrain laminate
• Plywood End Panels do not receive glaze detailing
• Note: Standard Construction will be produced for product not identified as available with PE when ordered under PE construction
l PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Natural woodgrainlaminate
Wall, Base, Tall and Vanity
Solid hardwood face frame
Plywood
Stain or paint to match door
and frame
¾˝
½˝
C8 Construction Options
Spec
ifica
tion
s and
Opt
ions
All Plywood Construction – APC
APC Full Kitchens
AP Individual Cabinets
• This construction option affects the entire cabinet
• Available for full or partial kitchen orders
• To order a full kitchen with All Plywood Construction use APC in the header of your order
• To order individual line items with All Plywood Construction, dash each line item with AP; Example: W3030 BUTT-AP, B12L-AP
• All Plywood Construction (APC) is available for most cabinets
• Consult All Plywood Construction (APC) option box for your desired cabinet construction
• This All Plywood option features: - 1/2” plywood base, vanity and tall end panels - 1/2” plywood wall and tall floors and ceilings,
corner gussets and toe kick backer - 1/2” plywood base and vanity floors - 3/8” plywood wall backs - 1/4” plywood base and vanity backs - 1/4” plywood tall backs except for PC and U36
which is 3/8” plywood - 5.2 mm plywood drawer bottoms - 11/16” plywood wall, tall, base and vanity shelves - 3/8” plywood wall hang rails - 1/4” plywood tall hang rails • Plywood End Panels do not receive glaze detailing • Note: Standard Construction will be produced for
product not identified as available with APC when ordered under APC construction
PE
l APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Natural woodgrainlaminate
Wall, Base, Tall and Vanity
Solid hardwood face frame
Plywood
Stain or paint to match door
and frame
¾˝
½˝
Matching Interior
MI • Matching interior option affects:
-End Panels -Shelves -Ceilings and Floors -Back Panel • Interior surfaces are easy clean
laminate • Consult Matching Interior (MI) option
box for availability for your desired cabinet
I Note: Matching Interior (MI) option is only available in cabinets with Glass Door (BIS_, MD_, SV_) or Prepared for Glass Door (DRS.PREP_, MD.PREP_, SV.PREP_) options
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
I MI
CFO
End Panel
MatchingInterior
Solid hardwood face frame
C9Construction Options
Specifications and Options
Depth Modification
Reduced Depth
RD9
RD12
RD15
RD18
RD21 Increased Depth
ID15
ID18
ID21
ID24
• Some cabinets can be reduced or increased in depth to fit design requirements. See specific cabinet information for availability
• When this option is selected, Cabinet Front Only (CFO) is no longer available
• Select trays are not available with this option. See individual cabinets for specific availability
• Cabinets that normally have drawers ordered less than 18” deep will be replaced with a false drawer front only
Note: Additional support is required for wall cabinets increased to 15” deep or deeper
PE
APC
l RD9
l RD12
l RD15
l RD18
l RD21
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Cabinet Front Only
CFO • Front frame and appropriate doors and drawer fronts only
• Does not include toe kick • Note: Cannot be combined
with any depth modifications or tray options
We recommend using this option on cabinetry containing
no factory installed accessories, since all cabinet components will be eliminated except face frame, doors and drawer fonts. For example, order BCFS36L-CFO instead of LS36L-CFO
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
l CFO
Deluxe Recessed Panel Drawer Front
DRPD • 5-piece drawer front (DRPD) option is only available in Rexton door style; comes standard in Ambridge, Bellwether and Chesterhill door styles
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
DRPD
24” wide Butt door options
With Glass
Prepared for Glass
C10 Construction Options
Spec
ifica
tion
s and
Opt
ions
Bistro Glass
With Glass 18” - 30” H
1BIS1
2BIS1
4BIS1 Prepared for Glass
18” - 30” H
1DRS.PREP1
2DRS.PREP1
4DRS.PREP1
With Glass 36” - 42” H
1BIS2
2BIS2
Prepared for Glass 36” - 42” H
1DRS.PREP2
2DRS.PREP2
• 1/8” removable tempered glass with BIS option. No glass with DRS.PREP option
• Available for select wall cabinets
• Example: W1830R-1BIS1 (1 Qty, Code, Size), W3636-2BIS2 (2 Qty, Code, Size)
• Note: Available for the following door styles: Bellwether, Chesterhill, Flaxton, Fox Pointe, Glenmoor, Rexton and Talmadge
• Note: Mitered door styles cannot be field modified for glass
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
l BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
With Glass Prepared for Glass Gray color coding indicates new product, size or code.
Savannah Mullion Glass
With Glass 18” - 30” H
1SV1
2SV1
4SV1 Prepared for Glass
18” - 30” H
1SV.PREP1
2SV.PREP1
4SV.PREP1
With Glass 36” - 42” H
1SV2
2SV2
Prepared for Glass 36” - 42” H
1SV.PREP2
2SV.PREP2
• 1/8” removable tempered glass with SV option. No glass with SV.PREP option
• Available for select wall cabinets
• All doors have two vertical and two horizontal mullions, except Talmadge 24” wide Butt door cabinets, which have only one vertical mullion
• Example: W1830R-1SV1 (1 Qty, Code, Size), W3636-2SV2 (2 Qty, Code, Size)
• Note: Available for the following door styles: Ambridge and Talmadge
• Note: Mitered door styles cannot be field modified for glass
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
l SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFOGray color coding indicates new product, size or code.
Traditional Mullion Glass
With Glass 18” - 30”H
1MD1
2MD1
4MD1 Prepared for Glass
18” - 30”H
1MD.PREP1
2MD.PREP1
4MD.PREP1
With Glass 36” - 42” H
1MD2
2MD2
Prepared for Glass 36” - 42” H
1MD.PREP2
2MD.PREP2
• 1/8” removable tempered glass with MD option. No glass with MD.PREP option
• Mullions are equally divided • Available for select wall
cabinets • For 15” and 18” wide
cabinets: 36” and 42” high cabinets have 2x4 lites, 30” high cabinets have 2x3 lites and 18” and 24” high cabinets have 2x2 lites
• For 21” and 24” wide cabinets: 36” and 42” high cabinets have 3x4 lites, 30” high cabinets have 3x3 lites and 24” high cabinets have 3x2 lites
• Example: W1830R-1MD1 (1 Qty, Code, Size), W3636-2MD2 (2 Qty, Code, Size)
• Note: Available for the following door styles: Fox Pointe, Glenmoor and Rexton
• Note: Mitered door styles cannot be field modified for glass
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
l MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
With Glass
Prepared for Glass
Gray color coding indicates new product, size or code.
C11Construction Options
Specifications and Options
1 Roll-out Tray
1ROT • Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets • Natural woodgrain laminate • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-
Out Tray (ROT) options are selected • All Plywood Construction (APC) have solid
wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
l 1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Roll-out Trays
2ROT • Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets • Natural woodgrain laminate • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-
Out Tray (ROT) options are selected • All Plywood Construction (APC) have solid
wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
3 Roll-out Trays
3ROT • Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 3 door Base cabinets • Natural woodgrain laminate • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-
Out Tray (ROT) options are selected • All Plywood Construction (APC) have solid
wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
l 3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
4 Roll-out Trays
4ROT • Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 2 door Base and Universal cabinets with center stile
• Natural woodgrain laminate • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-
Out Tray (ROT) options are selected • All Plywood Construction (APC) have solid
wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
l 4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
C12 Construction Options
Spec
ifica
tion
s and
Opt
ions
6 Roll-out Trays
6ROT • Sides and back are 1/2” inch engineered wood
with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 3 door Base and Universal cabinets • Natural woodgrain laminate • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out Tray
(ROT) options are selected • All Plywood Construction (APC) have solid wood roll-
out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15”
deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
l 6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
1 Full-Width Tray
1FWROT
• Full-width standard tray spans the full width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Butt door (cabinets with a B suffix) Base and Universal cabinets
• Natural woodgrain laminate • Trays 30” and wider will have a 3/8” thick engineered
wood bottom • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out Tray (ROT) options
are selected • All Plywood Construction (APC) have solid wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
l 1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Full-Width Trays
2FWROT
• Full-width standard tray spans the full width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Butt door (cabinets with a B suffix) Base and Universal cabinets
• Natural woodgrain laminate • Trays 30” and wider will have a 3/8” thick engineered
wood bottom • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out Tray (ROT) options
are selected • All Plywood Construction (APC) have solid wood roll-out trays (ROT) • Note: Not available on cabinets reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
l 2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Deep Roll-out Trays
2DROT • Sides, front and back, are 1/2” solid hardwood with
3-ply 5.2mm thick plywood bottom panel • 1 15/16” deep scalloped finger pull cut out • Available for most Base and Universal cabinets • Natural finish • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out Tray
(ROT) options are selected • Note: Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
l 2DROT
4DROT
6DROT
2DFWROT
MI
CFO
C13Construction Options
Specifications and Options
4 Deep Roll-out Trays
4DROT • Sides, front and back, are 1/2” solid hardwood with
3-ply 5.2mm thick plywood bottom panel • 1 15/16” deep scalloped finger pull cut out • Available for most 2 door Base and Universal
cabinets with center stile • Natural finish • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out
Tray (ROT) options are selected • Note: Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
l 4DROT
6DROT
2DFWROT
MI
CFO
6 Deep Roll-out Trays
6DROT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out • Available for most 3 door Base and Universal
cabinets • Natural finish • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out
Tray (ROT) options are selected • Note: Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
l 6DROT
2DFWROT
MI
CFO
2 Deep Full-Width Roll-out Trays
2DFWROT
• Full-width deep tray spans the full width of cabinet • Sides, front and back, are 1/2” solid hardwood with
3-ply 5.2mm thick plywood bottom panel • 1 15/16” deep scalloped finger pull cut out • Available for most Butt door (cabinets with a B
suffix) Base and Universal cabinets • Natural finish • 3/4 extension side mount glide • 75 lb. capacity • Shelves are omitted from cabinets when Roll-Out
Tray (ROT) options are selected • Note: Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
l 2DFWROT
MI
CFO
C14 Notes
Notes
Spec
ifica
tion
s and
Opt
ions
D1Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Cabinets
Wall Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard wall cabinet box depth is 12˝ unless stated otherwise. Add door thickness with bumpers for total depth.
Caution: Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below. Failure to provide additional support could result in collapse of the cabinet, serious personal injury, or property damage. Damage relating to failure to provide additional support is not covered by the limited warranty. See inside cover for warranty details.
Any wall cabinet over 24” wide or 30” high with a depth greater than 12” and/or butt doors, in addition to Wine Cabinets and Plate Racks, must be installed between two cabinets, a cabinet and a wall, or supported from below.
PE - - - Plywood EndsAPC - - - All Plywood ConstructionRD9 - - - Reduce Depth 9”ID15 - - - Increase Depth 15”ID18 - - - Increase Depth 18”ID21 - - - Increase Depth 21”ID24 - - - Increase Depth 24”BIS - - - Bistro GlassMD - - - Traditional Mullion GlassSV - - - Savannah Mullion GlassMI - - - Matching InteriorCFO - - - Cabinet Front Only
W 30 12
code width height
Wall Double Door 12” H
W2712 (Butt)
W3012 BUTT
W3312 BUTT
W3612 BUTT
W3912
W4212
W4512
W4812
• No shelf • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word
BUTT in all capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
12˝
12˝
Wall Refrigerator 24” Deep 12” H
WR3012 BUTT
WR3312 BUTT
WR3612 BUTT
WR3912
WR4212
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support is required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO24˝
12˝
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
D2 Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wal
l Cab
inet
s
Wall Double Door 15” H
W2715 (Butt)
W3015 BUTT
W3315 BUTT
W3615 BUTT
W3915
W4215
W4515
W4815
• No shelf • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO12˝
15˝
Wall Refrigerator 24” Deep 15” H
WR3015 BUTT
WR3315 BUTT
WR3615 BUTT
WR3915
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support is required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO24˝
15˝
Wall Single Door 18” H
Specify R or L
W2418 R or L
• No shelf
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
18˝
12˝
Wall Double Door 18” H
W2418 BUTT
W2718 (Butt)
n W3018 BUTT
W3318 BUTT
n W3618 BUTT
W3918
W4218
W4518
W4818
• No shelf • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
18˝ n Available with glass options (BIS, DRS.PREP,
MD, MD.PREP, SV, SV.PREP)
D3Wall Cabinets
Wall Cabinets
Wall Refrigerator 24” Deep 18” H
n WR3018 BUTT
WR3318 BUTT
n WR3618 BUTT
WR3918
WR4218
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support is requiredI Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO
24˝
18˝
n Available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Wall Single Door 23 1/2” H
Specify R or L
n W1224 R or L
W1524 R or L
W1824 R or L
Specify R or L
W2124 R or L
W2424 R or L
• One adjustable shelf I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
23 ½˝ n Not available with glass options (BIS, DRS.
PREP, MD, MD.PREP, SV, SV.PREP)
Wall Double Door 20 1/2” and 23 1/2” H
No shelf 20 1/2” High
W3021 BUTT
W3321 BUTT
W3621 BUTT
W3921
W4221
One shelf 23 1/2” High
n W2424 BUTT
W2724 (Butt)
n W3024 BUTT
W3324 BUTT
n W3624 BUTT
W3924
W4224
W4524
W4824
• One adjustable shelf in 23 1/2” high cabinet
• Any wall cabinet over 24˝ wide or 30˝ high or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
20 ½˝23 ½˝
Wall Refrigerator 24” Deep 23 1/2” H
n WR3624 BUTT
WR3924
WR4224
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support is required I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO24˝
23 ½˝ n Available with glass options (BIS, DRS.PREP,
MD, MD.PREP, SV, SV.PREP)
n Available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Caution! Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below.
D4 Wall Cabinets
Wal
l Cab
inet
s
Wall Double Door 27” H
W3027 BUTT
W3327 BUTT
W3627 BUTT
W3927
W4227
• One adjustable shelf • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
12˝
27˝
Wall Refrigerator 24” Deep 27” H
WR3627 BUTT
WR3927 • One adjustable shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support is required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO
27˝
24˝
Wall Single Door 30” H
Specify R or L
n W930 R or L
n W1230 R or L
W1530 R or L
W1830 R or L
W2130 R or L
W2430 R or L
• Two adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
30˝
12˝
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Wall Double Door 30” H
n W2430 BUTT
W2730 (Butt)
n W3030 BUTT
n W3330 BUTT
n W3630 BUTT
W3930
W4230
W4530
W4830
• Two adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
30˝
12˝
n Available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Caution! Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below.
D5Wall Cabinets
Wall Cabinets
Wall Single Door 36” H
Specify R or L
n W936 R or L
n W1236 R or L
W1536 R or L
W1836 R or L
W2136 R or L
W2436 R or L
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
36˝
12˝
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Wall Double Door 36” H
W2436 BUTT
n W2736 (Butt)
W3036 BUTT
W3336 BUTT
W3636 BUTT
n W3936
n W4236 • Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
36˝
12˝
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Wall Single Door 39” and 42” H
Specify R or L 39” High
n W939 R or L
n W1239 R or L
W1539 R or L
W1839 R or L
W2139 R or L
W2439 R or L
Specify R or L 42” High
n W942 R or L
n W1242 R or L
W1542 R or L
W1842 R or L
W2142 R or L
W2442 R or L
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
39˝42˝
12˝ n Not available with glass options (BIS, DRS.
PREP, MD, MD.PREP, SV, SV.PREP)
Wall Double Door 39” and 42” H
39” High
W2439 BUTT
n W2739 (Butt)
W3039 BUTT
W3339 BUTT
W3639 BUTT
n W3939
n W4239
42” High
W2442 BUTT
n W2742 (Butt)
W3042 BUTT
W3342 BUTT
W3642 BUTT
n W3942
n W4242
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
39˝42˝
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Caution! Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below.
D6 Peninsula Wall CabinetsNote: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.
Wal
l Cab
inet
s
Peninsula Wall Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction BIS - - Bistro Glass MD - - Traditional Mullion Glass SV - - Savannah Mullion Glass MI - - Matching Interior
PW 30 18
code width height
Peninsula Wall Single Door 18” H
PW2418 • No shelf • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
BIS
MD
SV
MI
18˝
12 /˝(excluding doors)
Peninsula Wall Double Door 18” H
n PW2418 BUTT
PW3018 BUTT
PW3618 BUTT
• No shelf • Each side has two doors I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
18˝
12/˝(excluding doors)
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Peninsula Wall Single Door 23 1/2” H
n PW1824
PW2124
PW2424
• One adjustable shelf • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
23 ½˝
12 /˝(excluding doors)
n Available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
D7Peninsula Wall CabinetsNote: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.
Wall Cabinets
Peninsula Wall Double Door 23 1/2” H
n PW2424 BUTT
PW3024 BUTT
PW3624 BUTT
• One adjustable shelf • Each side has two doors I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
I BIS
I MD
I SV
I MI
23 ½˝
12/˝(excluding doors)
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Peninsula Wall Single Door 30” H
n PW1830
PW2130
PW2430
• Two adjustable shelves • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
30˝
12/˝(excluding doors)
n Available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
Peninsula Wall Double Door 30” H
n PW2430 BUTT
PW3030 BUTT
PW3630 BUTT
• Two adjustable shelves • Each side has two doors I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
30˝
12/˝(excluding doors)
n Not available with glass options (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP)
D8 Wall Corner Cabinets
Wal
l Cab
inet
s
Wall Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - Plywood EndsAPC - - - All Plywood ConstructionRD9 - - - Reduce Depth 9”ID15 - - - Increase Depth 15”ID18 - - - Increase Depth 18”ID21 - - - Increase Depth 21”ID24 - - - Increase Depth 24”BIS - - - Bistro GlassMD - - - Traditional Mullion GlassSV - - - Savannah Mullion GlassMI - - - Matching InteriorCFO - - - Cabinet Front Only
WBC 24 30
code width height
Wall Blind Corner Cabinet Information
• Wall blind corner cabinets provide access to corner space and permits adjustability of up to 2 7/8” maximum to aid in kitchen cabinet layout. Consult chart for “pull” dimensions and minimum wall space requirements.
• “Pulling” the cabinet away from the corner (2 7/8” maximum), and using the supplied filler and panel provides clearance for opening doors when decorative hardware is used.
• R or L indicates blind end of cabinet. Please specify • Door hinged on same side as blind. • Square design door cabinets may be changed from right to left by inverting cabinet. • Arch design door cabinets cannot be inverted and must be ordered blind right or blind left. • Wall Filler Overlay (WFOL) is available separately for all Full Overlay door styles except Flaxton. Overlays are
used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below.
• Note: A 3” Wall Filler and Blind Panel is included with each WBC cabinet ordered, shipped unattached.
Wall Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
WBCDoor
Adjoining Cabinet Door
Overlay
3˝ Filler
12 /˝
Adjoining Cabinet
Peninsula Wall Blind Corner
A
B
C
D
WallBlind
Corner
(C)Frame
Opening
Partial Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
MaxPull
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
(A)Wall Space
(D) Door Hardware Clearance
(C)Frame
Opening
Full Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
/"
/"
/"
/"
/"
/"
/"
/"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 1 2 "
13 ½", 1 5 "
7 ½"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 1 2 "
13 ½", 1 5 "
7 ½"
WBC27
WBC30
WBC33
WBC36
WBC39
WBC45
WBC51
PWBC27 1 /" 4 ½"
Wall Blind Corner
AB
D
C
WBC Cabinet (Blind Right)
Filler and Panel
AdjoiningCabinet
Frame Opening
0˝ to
2 /˝
Right blind shown
D9Wall Corner Cabinets
Wall Cabinets
Wall Blind Corner Single Door 23 1/2” H and 30” H
Specify R or L One shelf 23 1/2” High
WBC3024 R or L
WBC3924 R or L
Specify R or L Two shelves 30” High
WBC2730 R or L
WBC3030 R or L
WBC3330 R or L
WBC3630 R or L
WBC3930 R or L
• R or L indicates blind • Adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
23 ½˝30˝
12˝
Wall Blind Corner Double Door 30” H
Specify R or L
WBC4530 R or L
WBC5130 R or L
• R or L indicates blind • Two adjustable shelves • Two different width doors; the narrower is
located next to the blind panel • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
30˝
12˝
Wall Blind Corner Single Door 36” H
Specify R or L
WBC2736 R or L
WBC3036 R or L
WBC3336 R or L
WBC3936 R or L
• R or L indicates blind • Three adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
36˝
12˝
Wall Blind Corner Single Door 39” and 42” H
Specify R or L 39” High
WBC2739 R or L
WBC3039 R or L
WBC3339 R or L
WBC3939 R or L
Specify R or L 42” High
WBC2742 R or L
WBC3042 R or L
WBC3342 R or L
WBC3942 R or L
• R or L indicates blind • Three adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝ high
or higher with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
39˝42˝
12˝
D10 Wall Corner Cabinets
Wal
l Cab
inet
s
Peninsula Wall Blind Corner 30” H
Specify R or L
PWBC2730 R or L
• R or L indicates blind • Two adjustable shelves • Door hinged to frame center stile • Single door on kitchen side; double doors
on peninsula side • Do not pull cabinet more than 2 7/8” from
corner • Blind Panel with 3” filler included, shipped
unattached
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
CFO
12 /˝
30˝
(excluding doors)
Wall Angle 12” Deep
Specify R or L Two shelves
WA2430 R or L Three shelves
WA2436 R or L
WA2439 R or L
WA2442 R or L
• Adjustable shelves • Back corner removed for easy installation • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the
corner cabinet may not function properly.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO30˝36˝39˝42˝
17"
24"
24"12"
12"
Wall Angle 15” Deep
Specify R or L Two shelves
WA2730 R or L Three shelves
WA2736 R or L
WA2739 R or L
WA2742 R or L
• Adjustable shelves • Back corner removed for easy installation • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
I Glass doors (BIS, DRS.PREP, MD, MD.PREP, SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO
30˝36˝39˝42˝
17"
27"
27"15"
15"
D11Wall Corner Cabinets
Wall Cabinets
Wall Easy Reach
Specify R or L Two shelves
WEZR2430 R or L Three shelves
WEZR2436 R or L
WEZR2439 R or L
WEZR2442 R or L
• Adjustable shelves • Two piece bi -fold door with independent
adjustment • 168º hinge opening • Back corner removed for easy installation
Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of
the corner cabinet may not function properly.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO
30˝36˝39˝42˝
12˝
24"
24"
12"
12"
12"
D12 Peninsula Wall Corner Cabinets
Wal
l Cab
inet
s
Peninsula Wall Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction
PWA 24 30 L
code width height
rear door
place-ment
Peninsula Wall Angle
PWA2430 R or L • Two adjustable shelves • R or L designates dining room side door
hinging • Stile on dining room frame is extra wide to
clear window or door molding • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
• Requires 24 1/16” of wall space excluding dining room side cabinet door
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
30˝
Left hand shown
Left Hand shown
17˝
12˝
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Left -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
17˝
12˝
Right Hand shown
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Right -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
D13Wall End Run Cabinets
Wall Cabinets
Wall End Run Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction BIS - - Bistro Glass MD - - Traditional Mullion Glass SV - - Savannah Mullion Glass MI - - Matching Interior CFO - - Cabinet Front Only
WCA 12 30
code width height
Wall Corner Angle
Specify R or L Two shelves
WCA1230 R or L Three shelves
WCA1236 R or L
WCA1239 R or L
WCA1242 R or L
• Adjustable shelves • For use at end of cabinet run or in a corner I Glass doors (BIS, DRS.PREP, MD, MD.PREP,
SV, SV.PREP) with Matching Interior (MI) are available on select door styles. See Construction Options for specifics
PE
l APC
I BIS
I MD
I SV
I MI
l CFO
12˝
12˝
45°
30˝36˝39˝42˝
12˝ 12˝
Wall End Corner
Two shelves
WEC1230 Three shelves
WEC1236
WEC1239
WEC1242
• Adjustable shelves • Two doors • Can be installed on either right or left end
of run or in a corner
PE
l APC
BIS
MD
SV
MI
l CFO
12"
8 /˝
8 /˝12"143°
63½°
11 /˝
30˝36˝39˝42˝
Solid Wood Wall End Open Shelf
Three shelves
SWEOS30 Four shelves
SWEOS36
SWEOS42
• Solid wood shelves and top • 5/8” thick fixed shelves and top • 30” high has three shelves with equal
spacing of 9 1/8” high • 36” high has four shelves with equal
spacing of 8 3/16” high • 42” high has four shelves with equal spacing of
9 11/16” high • Invertible for right or left hand use • Trimmable to 5 7/8” wide • Back not finished • End and back panels are 3/16” with veneered
plywood finish on exposed surfaces
PE
APC
BIS
MD
SV
MI
CFO
30˝36˝42˝
6 /˝ 12 ˝
6 /˝5 ¾˝
12 ˝
D14 Wall Open CabinetsCaution! Installation of a wall cabinet 30” or wider requires additional support, such as attachment to
a soffit, or support from below.
Wal
l Cab
inet
s
Wall Open Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Installation notes: Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support, such as attachment to a soffit or support from below.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction RD9 - - Reduce Depth 9” ID15 - - Increase Depth 15” ID18 - - Increase Depth 18” ID21 - - Increase Depth 21” ID24 - - Increase Depth 24”
WOC 15 30
code width height
Wall Open Cabinet
No shelf 12” High
WOC3012
WOC3612 One shelf
23 1/2” H
WOC1524
WOC1824
WOC2124
WOC2424 Two shelves
30” High
WOC1530
WOC1830
WOC2130
WOC2430 Three shelves
36” High
WOC1536
WOC1836
WOC2136
WOC2436 39” High
WOC1539
WOC1839
WOC2139
WOC2439 42” High
WOC1542
WOC1842
WOC2142
WOC2442
48” High
WOC1848
WOC2148
WOC2448 Three adjustable shelves,
one fixed shelf 54” High
WOC1854
WOC2154
WOC2454 60” High
WOC1860
WOC2160
WOC2460
• Adjustable shelves • No door • Matching laminate interior • Includes low profile clear polycarbonate
shelf supports in addition to hold -down style supports used for shipping
• 54” and 60” high are designed for countertop mount
Additional support is required. Wall hung applications must be limited to 15 lbs. per square foot of shelf
area; not to exceed 50 lbs. per shelf.
v PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
12˝23 1/˝
30˝36˝39˝42˝48˝
54˝60˝
12˝
Shown with two adjustable shelves
Shown with three adjustable shelves, one fixed shelf
12˝
18˝
D15Wall Open CabinetsCaution! Installation of a wall cabinet 30” or wider requires additional support, such as attachment to
a soffit, or support from below.
Wall Cabinets
Wall China Display 12” Deep 15” H
WCD3015 13 Plates
WCD3615 16 Plates
• Each plate opening is 1 5/8” wide x 11 1/4” deep x 11 1/2” high
• Matching laminate interior • Plate spindles finished to match • Plate spindles are not removable • Vertical wood grain back panel; except for
painted door styles
l PE
l APC
RD9
ID15
ID18
ID21
ID24
15˝
12˝ 30˝, 36˝
Lattice Wall
30” High
LW1530 11 Bottles 15” High
LW3015 11 Bottles
• 4” x 4” bottle openings • Matching laminate interior • Lattice finished to match • Lattice is not removable • Vertical wood grain back panel; except for
painted door styles
l PE
l APC
RD9
ID15
ID18
ID21
ID24
30˝
12˝
12˝
30˝
15˝
15˝
LW3015
LW1530
Wall Wine Rack Scalloped
15” High
WWRS3015 14 Bottles
WWRS3615 16 Bottles 18” High
WWRS3018 14 Bottles
WWRS3618 16 Bottles 30” High
WWRS1530 12 Bottles
WWRS1830 16 Bottles
WWRS2430 20 Bottles
• Scalloped rails are 3/4” wide x 1 5/8” solid wood
• Matching laminate interior • Shelves and cabinet bottom are finished to
match cabinet exterior • Scalloped rails finished to match • Shelves are not removable • Bottle scallops are on 4” centers • Vertical wood grain back panel; except for
painted door styles • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
RD9
ID15
ID18
ID21
ID24
15˝18˝
12˝
30˝
12˝
WWRS3018
WWRS1830
D16 Wall Microwave CabinetsCaution: Additional support is required.
Wal
l Cab
inet
s
Wall Microwave Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Installation notes: Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support, such as attachment to a soffit or support from below.
Any wall cabinet over 24” wide or 30” high with a depth greater than 12” or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction ID21 - - Increase Depth 21” ID24 - - Increase Depth 24” CFO - - Cabinet Front Only
WMC 30 18 36
code width depth height
Wall Microwave Cabinet 36” H
WMC271836 (Butt)
WMC301836 BUTT • No shelf in upper section • Matching laminate interior • 4 1/2” wide trimmable face frame stiles • Doors are attached with face -mounted
concealed hinges • Designed for “built -in” style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support,
such as attachment to a soffit or support from below
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word BUTT in all
capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form
l PE
l APC
l ID21
l ID24
l CFO
Cabinet Opening Size Trimmable to
WMC271836
WMC301836
13˝ high x 18˝ wide
13˝ high x 21˝ wide
19 ½˝ high x 24˝ wide
19 ½˝ high x 27˝ wide
15˝
36˝
18˝
Wall Microwave Cabinet 45” H
WMC271845 (Butt)
WMC301845 BUTT • No shelf in upper section • Matching laminate interior • 4 1/2” wide trimmable face frame stiles • Doors are attached with face -mounted
concealed hinges • Designed for “built -in” style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
l ID21
l ID24
l CFO
Cabinet Opening Size Trimmable to
WMC271845 13½˝ high x 18˝ wide 20˝ high x 24˝ wide
WMC301845 13½˝ high x 21˝ wide 20˝ high x 27˝ wide
23 ½˝
45˝
18˝
D17Wall Microwave CabinetsCaution: Additional support is required.
Wall Cabinets
Wall Microwave Shelf Cabinet
30” High
WMSC271230 (Butt) 36” High
WMSC241236 (Butt)
WMSC271236 (Butt) 42” High
WMSC271242 (Butt)
• 3/4” thick shelf extends 6 25/32” beyond face frame
• Matching laminate interior • No shelf in upper section • Shelf shipped unattached for easier
installation; mounting hardware included • Designed for countertop style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
ID21
ID24
l CFO
Opening SizesCabinet
WMSC241236
WMSC271230
WMSC271236
18 ¾˝ high x 21˝ wide x 18˝ deep (shelf)
15 ¾˝ high x 24˝ wide x 18˝ deep (shelf)
18 ¾˝ high x 24˝ wide x 18˝ deep (shelf)
21 ¾˝ high x 24˝ wide x 18˝ deep (shelf)WMSC271242
12˝
18˝
30˝36˝42˝
12˝15˝18˝
Wall Microwave Shelf
12” Deep
WMS271218
WMS301218 15” Deep
WMS271518
WMS301518
• 3/4” thick shelf extends 3 25/32” beyond face frame of cabinet
• Grain direction runs lengthwise (when applicable)
• Shelf shipped unattached for easier installation; mounting hardware included
• Designed for countertop style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
ID21
ID24
CFO
Opening SizesCabinet
WMS271218
WMS301218
WMS271518
24˝ wide x14 ¼˝ high x 15˝ deep
27˝ wide x14 ¼˝ high x 15˝ deep
24˝ wide x14 ¼˝ high x 18˝ deep
27˝ wide x14 ¼˝ high x 18˝ deepWMS301518
12˝, 15˝
18˝
D18 Wall Hoods
Wal
l Cab
inet
s
Wall Hoods Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Consult your local building code for rules and regulations that may apply to the installation of this product.
Specifications subject to change without notice.
APC - - All Plywood Construction
WHCC 36 24 42
code width depth height
Wall Hood Front
RHF3024SP
RHF3624SP
• Decorative slanted range hood with batten strips
• For installations with exterior ductwork • Hood extends 7 1/4” from face frame of
adjacent wall cabinets, 19 1/4” from wall • Galley rail included, shipped unattached • Almond colored painted metal liner included • Wall Hood Front Blower (RHB) required;
ordered separately • Note: Must be installed between two cabinets
or between cabinet and side wall
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to
installation. Hood must be securely anchored to wall
v APC
23 ½˝
30˝ or 36˝
Wall Hood Classic Chimney
WHCC362442P • Solid wood/wood veneer construction • For installations with exterior ductwork • A 3” space is recommended on both sides of
hood for adjacent cabinet runs • Can accommodate ceilings up to 9’ high with
installation of the chimney or 8’ without the chimney
• Not designed to be used with a soffit • 12” tall chimney is shipped unattached for
easier installation • Requires a metal liner and blower. See Wall
Hood Liner (WHL36) and Wall Hood Blower (WHB36)
• Note: Cabinetry and appliances located below these Wall Hoods must be pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to
installation. Hood must be securely anchored to wall
v APC
21˝38 ¾˝
12 ½˝
12˝
17 ½˝42˝
20˝11 ¾˝
D19Wall Hoods
Wall Cabinets
Wall Hood Cove
WHCV362442
• Solid wood/wood veneer construction • For installations with exterior ductwork • A 3” space is recommended on both sides of hood for adjacent
cabinet runs • Can accommodate ceilings up to 9’ high • Not designed to be used with a soffit • Requires a metal liner and blower. See Wall Hood Liner
(WHL36) and Wall Hood Blower (WHB36) • Note: Cabinetry and appliances located below these Wall
Hoods must be pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to installation. Hood must be securely anchored to wall
v APC
21˝38˝
35 ½˝ 12˝
42˝
12˝ 20˝
Wall Hood Front Blower
RHB
• Double squirrel cage blower unit (360 CFM maximum) with a solid state, variable speed control, on/off switch, and two 40 watt tubular light fixtures with lens diffuser and dimming switch. Tubular bulbs not included
• For installations with exterior ductwork • 3 1/4” x 10” top exhaust with built -in back draft damper unit;
duct not included • Pre -wired for electrical connection • AC 120 volt required • Washable aluminum mesh grease filter included • Charcoal filter laminated within replaceable grease filter • UL and CSA approved • For use with Wall Hood Front (RHF) • Almond colored painted finish
APC
Wall Hood Blower
WHB36•620
• 620 CFM/7.5 Sones; three -speed motor with push button electronic control
• For installations with exterior ductwork • Constructed of heavy gauge steel • Pre -wired for electrical connection • AC 120 volt required • 8” diameter duct vents on top • Dual bulb halogen lighting (PAR 20) included • UL and HVI approved • For use with Wall Hood Cove (WHCV) and Wall Hood
Classic Chimney (WHCC) • For use with Wall Hood Liner (WHL36) • Metallic medium gray painted finish on cover plate is
corrosion and rust resistant. Blowerbox has galvanized finish
APC
8" diameter
10 ½˝
11 ½˝
17 /˝
12" 21 /˝
Wall Hood Liner
WHL36
• Constructed of heavy gauge steel • For installations with exterior ductwork • For use with Wall Hood Cove (WHCV) and Wall Hood
Classic Chimney (WHCC) • For use with Wall Hood Blower (WHB) • Metallic medium gray painted finish on cover plate is
corrosion and rust resistant
APC
34 /˝18 /˝
4˝
11 ¼˝
17 /˝
D20 Wall Specialty Cabinets
Wal
l Cab
inet
s
Wall Specialty Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction
TSA 24 18
code width height
Tambour Storage
TS18
TS24
TS30
• Provides countertop out -of -sight storage for small appliances
• Designed to set back 1/4” from wall cabinet frame for easier installation
• Fits under 18”, 24” and 30” wide wall cabinets • Features a torsion spring activated roll -up tambour door • “No back” design allows easy access to electrical outlets and
notching for backsplash • Bottom edges may be trimmed a maximum of 1” before
interfering with tambour track stop. Width cannot be trimmed
• End panels are 1/2” thick and have matching exterior surface. End panels shipped unattached
• Matching laminate interior • Holes for knobs are pre -drilled. One antique brass knob is
included with TS18 and TS24; two with TS30 • Installation instructions and mounting hardware included
PE
APC
18 ¼˝
Tambour Storage Angle
TSA2418
TSA2718
• Provides countertop out -of -sight storage for small appliances • Designed to set back 1/4” from wall angle cabinet frame
for easier installation • TSA24 for use under Wall Angle (WA24); TSA27 for use
under Wall Angle (WA27) • Features a torsion spring activated roll -up tambour door • “No back” design allows easy access to electrical outlets and
notching for backsplash • Bottom edges may be trimmed a maximum of 1” before
interfering with tambour track stop • End panels are 1/2” thick and have matching exterior surface.
End panels shipped unattached • Hole for knob is pre -drilled and one antique brass knob
included • Matching laminate interior • Installation instructions and mounting hardware included • Installation Note: Requires field fabricated back on one side
when used with PWA
PE
APC
18 ¼˝
Spice Drawer Cabinet
SDC18 3 drawers
SDC24 4 drawers
SDC30 5 drawers
SDC36 6 drawers
• Solid half blind, 1/2” thick, dovetail drawers • Drawer fronts are solid wood • Matching wood veneer interior and exterior surfaces • Includes a matching solid wood strip at each end to align
with cabinet when installed horizontally • Interior drawer is 10” deep, 4 1/8” wide and 4 7/16” tall • Units may be stacked horizontally or mounted vertically • Decorative hardware may be required
PE
APC
6˝
12˝
Reveals
5½˝
5½˝ 5½˝½˝ /˝ /˝
¼˝
¼˝
SDC30
D21Wall Specialty Cabinets
Wall Cabinets
Door Storage
Specify R or L
DOS18 R or L
DOS24 BUTT
• Provides countertop out -of -sight storage for small appliances
• Designed to be flush mounted with 12” deep wall cabinets
• Frame and end panels oversized for custom fit • End panels are shipped unattached • “No back” design allows easy access to
electrical outlets and notching for backsplash
l PE
l APC
18 /˝
18 /˝
12˝
12˝
DOS18
DOS24 BUTT
Wall Filler Pull-out
WFP3.30
2 3/4” shelf width; 1 3/4” usable space between chrome rails; 3 1/16” required between adjacent cabinets
WFP6.30
5 3/4” shelf width; 4 3/4” usable space between chrome rails; 6 1/16” required between adjacent cabinets
• Three adjustable natural finished hardwood shelves
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Unit slides on full extension runners; one on the top and two at the bottom
• Must be installed between two cabinets that are at least 30” high and 12” deep
• Natural finish hardwood interior
Do not use filler pullouts at the end of cabinet runs or next to appliances. They must be installed
between two cabinets or a cabinet and an end panel
PE
APC
30˝
12˝ 3˝, 6˝
D22 Wall Accessories
Wal
l Cab
inet
s
Wall Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
WFOL 3 •12
code width height
Under Cabinet Shelf
UCS36 • Solid wood ends and wood veneered shelf • 4 3/4” deep shelves with groove for displaying
plates up to 6 1/8” diameter • For use under 36” wide wall cabinets • Back and top panels included for strength and
ease of installation • Ends can be removed so that the assembly can
be cut down in 3” increments to only 12” wide for narrower cabinet applications
• Shipped assembled
v C
v M
v O
8 ¼”
9 ¾”
Under Cabinet Shelf Corner
UCSC2424 • Solid wood ends and wood veneered shelves
• 4 3/4” deep shelves with groove for displaying plates up to 6 1/8” diameter
• Extends 24” from corner in both directions • Fits under WA24 and WEZR24 • Back and top panels included for strength and
ease of installation • Shipped assembled
v C
v M
v O
8 ¼”
9 ¾”
1 Shelf Lazy Susan Kit
LS18.1 • One 18” diameter wide impact white plastic shelf
• Distance from top of shelf rim to top of cabinet surface is 2 7/8”
• Attaches to cabinet shelf or bottom, 1 1/2” clearance gap between bottom of shelf and cabinet shelf or bottom
• Installation instructions and mounting hardware included
• Fits 30”, 36”, 39” and 42” high Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets
C
M
O
18˝
2 /˝
Top of cabinet f loor
Shelf rim
D23Wall Accessories
Wall Cabinets
3 Shelf Lazy Susan Kit
LS18.3 • Three 18” diameter wide impact white plastic shelves that rotate together
• Fits 24” wide Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets
• Replaces adjustable shelves shipped with cabinet
• Includes center post and installation hardware • Adjust 22” to 33” in height
C
M
O
18˝
Stem Glass Holder
SGH30 6 sections
SGH36 8 sections
• Solid wood • Fits under standard 12” deep wall cabinet • Rack may be cut down for narrower cabinet
application • Installation instructions and mounting
hardware included
v C
v M
v O
1 /˝
Open Cube Organizer
OCO18 3 compartments
OCO24 4 compartments
OCO30 5 compartments
OCO36 6 compartments
• Units may be stacked horizontally or mounted vertically
• 5 1/4” x 5 1/4” square compartments • Matching wood veneer interior and exterior
surfaces • Includes a matching solid wood strip at each
end to align with cabinet when installed horizontally
• Note: This cabinet features “frameless” type construction
When using an Organizer (O—) Cabinet under a wall cabinet at the end of a run, order Wood Veneer
Paneling (WSK) for the wall cabinet to flush the ends. (There will be a seam)
v C
v M
v O
6˝
12˝
Door Spice Rack
DSR12 8” Wide
DSR15 11” Wide
DSR18 14” Wide
• Solid wood rack with natural finish • Installs on backside of cabinet door • Installation instructions and mounting
hardware included • Not available on Ambridge or Bellwether door
styles • Not for use on any BUTT door cabinets,
except Flaxton • For Fox Pointe door style, the rack installs
onto the backside of the door center panel. DSR12 installs on 15” and 30” wide cabinets. DSR15 installs on 18” and 36” wide cabinets. DSR18 installs on 21” and 42” wide cabinets
C
M
O
3˝
4 ¾˝8˝, 11˝, 14˝
D24 Wall Accessories
Wal
l Cab
inet
s
Wall Filler
30” High
WF1•30
WF2•30
WF3•30
WF6•30 36” High
WF3•36
WF6•36 39” High
WF3•39
WF6•39
42” High
WF3•42
WF6•42 30” High
WF3X3•30 42” High
WF3X3•42
• 3/4” thick solid wood • Backside of filler not finished
v C
v M
v O
1" 2" 3" 3" 3"6"
30"42"
30"36"39"42"
30"
WF WF WF3X3
Wall Filler Overlay
3” Wide
WFOL3•12
WFOL3•15
WFOL3•18
WFOL3•21
WFOL3•24
WFOL3•27
WFOL3•30
WFOL3•36
WFOL3•39
WFOL3•42
6” Wide
WFOL6•21
WFOL6•24
WFOL6•30
WFOL6•36
WFOL6•39
WFOL6•42
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included • Available for all full overlay door styles except
Flaxton
v C
v M
v O
2 /˝5 /˝
11 ¼˝14 ¼˝17 ¼˝19 ¾˝22 ¾˝26 ¼˝29 ¼˝35 ¼˝38 ¼˝41 ¼˝
Wall Fluted Filler
WFF3•12
WFF3•15
WFF3•18
WFF3•24
WFF3•30
WFF3•36
WFF3•39
WFF3•42
• 3/4” thick solid wood • Four flutes • Backside of filler not finished
v C
v M
v O
1 1/˝
3˝
¾˝
1 1/˝
12˝15˝18˝23 1/˝30˝36˝39˝42˝
3˝
¾˝
/˝
Filler Extension
FE3 •30
FE3 •42
FE3 •60
• 3/4” thick solid wood • Fills 3” space between cabinets that are offset 3” • For right or left hand use • Backside of filler not finished
v C
v M
v O
3˝¾˝
30˝42˝60˝
3˝
3˝
Filler ExtensionApplicationFiller Extension
D25Wall Accessories
Wall Cabinets
Fluted Filler Extension
FFE3 •30
FFE3 •36
FFE3 •39
FFE3 •42
• 3/4” thick solid wood • Five flutes • Fills 3” space between cabinets that are offset 3” • For right or left hand use • Backside of filler not finished
v C
v M
v O
¾˝
30˝36˝39˝42˝
1 1/˝
1 1/˝
Filler ExtensionApplicationFiller Extension
3˝
3˝
Wall Box
30” High
WB3 •30
WB6 •30 42” High
WB3 •42
WB6 •42
• Front is 3/4˝ solid wood • End panels recessed 1/4” • Finished front and both sides • Vertical wood grain • May be used on either right or left end • Not available in All Plywood Construction (APC)
v C
v M
v O
12˝
3˝, 6˝30˝42˝
¾˝¼˝
Wall Fluted Column
WFC61530
WFC61536
WFC61542
• Fluted front is 3/4” solid wood • Six flutes • Finished front and sides • Flush end panels • Vertical wood grain • May be used on either right or left end • Available in All Plywood Construction (APC)
v C
v M
v O¾˝
15˝ 6˝
30˝36˝42˝
1 ½˝
1 ½˝
D26 Wall Accessories
Wal
l Cab
inet
s
Matching Wall End Panel
MWEP1230
MWEP1236
MWEP1239
MWEP1242
• Provides a finished furniture look to 12” deep wall cabinet ends
• 5/32” thick veneered plywood panel • Full overlay door styles shipped unattached to
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• For right or left hand use • Field installation only
v C
v M
v O
Item
MWEP1230
MWEP1236
MWEP1239
MWEP1242
11 ¼˝
11 ¼˝
11 ¼˝
11 ¼˝
Width
30˝
36˝
39˝
42˝
Height
29 ¼˝
35 ¼˝
38 ¼˝
41 ¼˝
Height
11 /˝
11 /˝
11 /˝
11 /˝
Width
28˝
34˝
37˝
40˝
Height
10 ¼˝
10 ¼˝
10 ¼˝
10 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Grain Direction
30˝36˝39˝42˝
E1Base Cabinets
Base Cabinets
Base Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard base cabinet box depth is 24” unless stated otherwise. Add door thickness with bumpers for total depth.
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - - Plywood Ends APC - - - - - - All Plywood Construction RD12 - - - - - Reduce Depth 12” RD15 - - - - - Reduce Depth 15” RD18 - - - - - Reduce Depth 18” RD21 - - - - - Reduce Depth 21” 1ROT - - - - - 1 Roll -out Tray 2ROT - - - - - 2 Roll -out Trays 3ROT - - - - - 3 Roll -out Trays 4ROT - - - - - 4 Roll -out Trays 6ROT - - - - - 6 Roll -out Trays 1FWROT - - 1 Full Width Tray 2FWROT - - 2 Full Width Trays 2DROT - - - 2 Deep Roll -out Trays 4DROT - - - 4 Deep Roll -out Trays 6DROT - - - 6 Deep Roll -out Trays 2DFWROT - 2 Deep Full Width Roll -out Trays CFO - - - - - - Cabinet Front Only
B 15 12 R •FH
code width depth hinge suffix
Base Single Door
Specify R or L
B12 R or L
B15 R or L
B18 R or L
B21 R or L
B24 R or L
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are not available with reduced depth options
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
Base Double Door
One drawer
n B24 BUTT
n B27 (Butt)
n B30 BUTT
n B33 BUTT
n B36 BUTT
u B39
Two drawers
u B42
u B45
u B48
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
• Note: When depth is reduced to 12” or 15”, drawers become a false front
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word
BUTT in all capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
3ROT
I 4ROT
6ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
6DROT
I 2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝
B24B-B39
B42-B48
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
E2 Base Cabinets
Base
Cab
inet
s
Base Three Door
B54 • Three drawers • Three equal sized doors; center door
hinged right • One adjustable shelf • 3 3/16” wide full -width support cross rail
across top front of cabinet I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are not available with reduced depth options
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
I 3ROT
4ROT
I 6ROT
1FWROT
2FWROT
2DROT
4DROT
I 6DROT
2DFWROT
l CFO
34 ½˝
24˝18˝
18˝18˝
Base Single Door w/Two Full-Width Trays
Specify R or L
B12 R or L•2FWT
B15 R or L•2FWT
B18 R or L•2FWT
B21 R or L•2FWT
B24 R or L•2FWT
• One drawer • Two standard Full -width Roll -out Trays
(FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Single Door w/Two Deep Full-Width Trays
Specify R or L
B12 R or L•2DFWT
B15 R or L•2DFWT
B18 R or L•2DFWT
B21 R or L•2DFWT
B24 R or L•2DFWT
• One drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Full-Width Trays
B24 BUTT•2FWT
B27 (Butt)•2FWT
B30 BUTT•2FWT
B33 BUTT•2FWT
B36 BUTT•2FWT
• One full -width drawer • Two standard Full -width Roll -out Trays
(FWROT)
Remember, when designing a space for storing heavy items, avoid using 30–36” wide Roll -Out
Trays (ROT). These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
E3Base Cabinets
Base Cabinets
Base Double Door w/Two Deep Full-Width Trays
B24 BUTT•2DFWT
B27 (Butt)•2DFWT
B30 BUTT•2DFWT
B33 BUTT•2DFWT
B36 BUTT•2DFWT
• One full -width drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Full-Width Trays – Full Extension
B30 BUTT•2FWTFX
B36 BUTT•2FWTFX • One full -width drawer • Two Full -width Roll -out Trays (FWROT)
with full extension, ball bearing runners
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Deep Full-Width Trays – Full Extension
B30 BUTT•2DFWTFX
B36 BUTT•2DFWTFX • One full -width drawer • Two Deep Full -width Roll -out Trays
(DFWROT) with full extension, ball bearing runners
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Four Trays
One Drawer
B39 •4T
Two Drawers
B42 •4T
B45 •4T
B48 •4T
• Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
B39
34 ½˝
24˝
34 ½˝
24˝ B42-B48
34 ½˝
24˝
34 ½˝
24˝
E4 Base Cabinets
Base
Cab
inet
s
Base Double Door w/Four Deep Trays
One Drawer
B39 •4DT
Two Drawers
B42 •4DT
B45 •4DT
B48 •4DT
• Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
B39
B42-B48
34 ½˝
24˝
Base Three Door w/Six Trays
B54 •6T • Three drawers • Six standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Base Three Door w/Six Deep Trays
B54 •6DT • Three drawers • Six Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Base Full-Height Single Door
Specify R or L No Shelf
u B9 R or L•FH
Specify R or L One Shelf
B12 R or L•FH
B15 R or L•FH
B18 R or L•FH
B21 R or L•FH
B24 R or L•FH
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
u Roll -out Trays (ROT) and Deep Roll -out Trays (DROT) are not available
E5Base Cabinets
Base Cabinets
Base Full-Height Double Door
n B24 BUTT•FH
n B27 (Butt)•FH
n B30 BUTT•FH
n B33 BUTT•FH
n B36 BUTT•FH
u B39 •FH
u B42 •FH
u B45 •FH
u B48 •FH
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
3ROT
I 4ROT
6ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
6DROT
I 2DFWROT
l CFO
34 ½˝
24˝
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Base Full-Height Single Door 12” Deep
Specify R or L
B1212 R or L•FH
B1512 R or L•FH
B1812 R or L•FH
B2112 R or L•FH
B2412 R or L•FH
• Two adjustable shelves
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
12˝
Base Full-Height Double Door 12” Deep
B2412 BUTT•FH
B2712 (Butt)•FH
B3012 BUTT•FH
• Two adjustable shelves
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
12˝
Base Full-Height Single Door w/Two Full-Width Trays
Specify R or L
B12 R or L•FH•2FWT
B15 R or L•FH•2FWT
B18 R or L•FH•2FWT
B21 R or L•FH•2FWT
B24 R or L•FH•2FWT
• Two standard Full -width Roll -out Trays (FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
1234 / ˝
E6 Base Cabinets
Base
Cab
inet
s
Base Full-Height Single Door w/Two Deep Full-Width Trays
Specify R or L
B12 R or L•FH•2DFWT
B15 R or L•FH•2DFWT
B18 R or L•FH•2DFWT
B21 R or L•FH•2DFWT
B24 R or L•FH•2DFWT
• Two Deep Full -width Roll -out Trays (DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Double Door w/Two Full-Width Trays
B24 BUTT•FH•2FWT
B27 (Butt)•FH•2FWT
B30 BUTT•FH•2FWT
B33 BUTT•FH•2FWT
B36 BUTT•FH•2FWT
• Two standard Full -width Roll -out Trays (FWROT)
Remember, when designing a space for storing heavy items, avoid using 30–36” wide Roll -Out
Trays (ROT). These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Double Door w/Two Deep Full-Width Trays
B24 BUTT•FH•2DFWT
B27 (Butt)•FH•2DFWT
B30 BUTT•FH•2DFWT
B33 BUTT•FH•2DFWT
B36 BUTT•FH•2DFWT
• Two Deep Full -width Roll -out Trays (DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Double Door w/Four Trays
B39 •FH•4T
B42 •FH•4T
B45 •FH•4T
B48 •FH•4T
• Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
E7Base Cabinets
Base Cabinets
Base Full-Height Double Door w/Four Deep Trays
B39 •FH•4DT
B42 •FH•4DT
B45 •FH•4DT
B48 •FH•4DT
• Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Peninsula Base Single Door
PB18
PB21
PB24
• Peninsula side has false drawer front • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
l PE
l APC
RD12
RD15
RD18
RD21
l 1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
l 2DROT
4DROT
6DROT
2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Peninsula Base Single Door w/Two Full-Width Trays
PB18 •2FWT
PB21 •2FWT
PB24 •2FWT
• Peninsula side has false drawer front • Door hinged left on kitchen side • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Peninsula Base Single Door w/Two Deep Full-Width Trays
PB18 •2DFWT
PB21 •2DFWT
PB24 •2DFWT
• Peninsula side has false drawer front • Door hinged left on kitchen side • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
E8 Base Cabinets
Base
Cab
inet
s
Peninsula Base Double Door
PB24 BUTT
PB27 (Butt)
PB30 BUTT
PB36 BUTT
• One adjustable shelf • Peninsula side has false drawer front
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
l 1FWROT
l 2FWROT
2DROT
4DROT
6DROT
l 2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Peninsula Base Double Door w/Two Full-Width Trays
PB24 BUTT•2FWT
PB27 (Butt)•2FWT
PB30 BUTT•2FWT
PB36 BUTT•2FWT
• Peninsula side has false drawer front • Two standard Full -width Roll -out Trays
(FWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Peninsula Base Double Door w/Two Deep Full-Width Trays
PB24 BUTT•2DFWT
PB27 (Butt)•2DFWT
PB30 BUTT•2DFWT
PB36 BUTT•2DFWT
• Peninsula side has false drawer front • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Base Combination Drawer (4)
Specify DR or DL
BCD24 DR or DL•4D
BCD30 DR or DL•4D
BCD36 DR or DL•4D
• Three standard height drawers; top drawer is full -width
• One deep drawer • One fixed shelf • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers I Deep Roll -out Trays (DROT) are not
available with reduced depth options
l PE
l APC
RD12
RD15
l RD18
l RD21
l 1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
E9Base Cabinets
Base Cabinets
Base Combination Drawer (4) w/Two Full-Width Trays
Specify DR or DL
BCD24 DR or DL•4D•2FWT
BCD30 DR or DL•4D•2FWT
BCD36 DR or DL•4D•2FWT
• Three standard height drawers; top drawer is full -width
• One deep drawer • Two standard Full -width Roll -out Trays
(FWROT) • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 ½˝
Base Combination Drawer (4) w/Two Deep Full-Width Trays
Specify DR or DL
BCD24 DR or DL•4D•2DFWT
BCD30 DR or DL•4D•2DFWT
BCD36 DR or DL•4D•2DFWT
• Three standard height drawers; top drawer is full -width
• One deep drawer • Two Deep Full -width Roll -out Trays
(DFWROT) • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 ½˝
Base Pots and Pans Storage Two Drawer
BPPS27 •2
BPPS30 •2
BPPS33 •2
BPPS36 •2
• Two 11” tall plywood drawers • 3 3/16” wide full -width support cross rail
across top front of cabinet • Note: Solid wood drawers not available
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
Base Three Drawer
BD12 •3
BD15 •3
BD18 •3
BD21 •3
BD24 •3
BD27 •3
BD30 •3
BD33 •3
BD36 •3
• One standard height drawer • Two deep drawers • Full -extension undermount soft -close
slides on all three drawers
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
E10 Base Cabinets
Base
Cab
inet
s
Base Four Drawer
BD12
BD15
BD18
BD21
BD24
BD27
• Three standard height drawers • One deep drawer
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
CoreGuard® Sink Base
SB30 BUTT•CG
SB33 BUTT•CG
SB36 BUTT•CG
• No shelf • Easy to clean and durable sink base helps
protect the cabinetry from everyday leaks and spills
• Back, end and bottom panels are made of an engineered polymer material
• Bottom panel slants 1º toward front of cabinet and has raised ribs to slightly elevate stored items
• Decorative end panel required for end of peninsula or island. Not Included, order separately
• One full -width false drawer front above doors
Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of
one (1) 15” cabinet or larger installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Opening Sizes
Cabinet Top Width Top Depth
SB30BUTT-CG 27 ⁄˝ 22 ⅜ ˝
SB33BUTT-CG 30 ⁄˝ 22 ⅜ ˝
SB36BUTT-GC 33 ⁄˝ 22 ⅜ ˝
E11Base Cabinets
Base Cabinets
CoreGuard® Sink Base w/Utensil Tray
SB30 BUTT•CG•UT
SB33 BUTT•CG•UT
SB36 BUTT•CG•UT
• No shelf • Easy to clean and durable sink base helps
protect the cabinetry from everyday leaks and spills
• Removable high -impact, tilt down, white plastic storage tray installed on backside of drawer front
• Concealed self -closing hinges allow drawer front to tilt down 51º for tray access
• Hinge detent holds drawer front in full open position
• Back, end and bottom panels are made of an engineered polymer material
• Bottom panel slants 1º toward front of cabinet and has raised ribs to slightly elevate stored items
• Decorative end panel required for end of peninsula or island. Not Included, order separately
Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of
one (1) 15” cabinet or larger installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Opening Sizes
Cabinet Top Width Top Depth
SB30BUTT•CG•UT 27 ⁄˝ 22 ⅜ ˝
SB33BUTT•CG•UT 30 ⁄˝ 22 ⅜ ˝
SB36BUTT•CG•UT 33 ⁄˝ 22 ⅜ ˝
Wood Sink Base
Specify R or L Single Door One Drawer
SB12 R or L•W
SB15 R or L•W
SB18 R or L•W
SB21 R or L•W
SB24 R or L•W
Double Door One Drawer
SB24 BUTT•W
SB27 (Butt)•W
SB30 BUTT•W
SB33 BUTT•W
SB36 BUTT•W
SB39 •W Double Door
Two Drawers
SB42 •W
SB48 •W
• No shelf • False drawer front(s)
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝
SB12-SB24
SB24B-SB39
SB42-SB48
34 ½˝
24˝
34 ½˝
24˝SB24
34 ½˝
SB42-SB48
34 ½˝
24˝SB24 BUTT-SB39
24˝
E12 Base Cabinets
Base
Cab
inet
s
Wood Sink Base w/Utensil Tray
Specify R or L Single Door One Utensil Tray
SB24 R or L•W•UT
Double Door One Utensil Tray
SB24 BUTT•W•UT
SB27 (Butt)•W•UT
SB30 BUTT•W•UT
SB33 BUTT•W•UT
SB36 BUTT•W•UT
SB39 •W•UT Double Door
Two Utensil Trays
SB42 •W•UT
SB48 •W•UT
• No shelf • Removable high -impact, tilt down, white
plastic storage tray installed on backside of drawer front
• Hinge detent holds drawer front in full open position
• Concealed self -closing hinges allow drawer front to tilt down 51º for tray access
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Wood Sink Base 27” Deep
One Drawer Front
SB2727 (Butt)•W
SB3027 BUTT•W
SB3327 BUTT•W
SB3627 BUTT•W
Two Drawer Fronts
SB4227 •W
• No shelf • False drawer front(s)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
27˝
34 ½˝
27˝ SB2727-SB3627 BUTT
SB4227
Wood Sink Base 27” Deep w/Utensil Tray
One Utensil Tray
SB2727 (Butt)•W•UT
SB3027 BUTT•W•UT
SB3327 BUTT•W•UT
SB3627 BUTT•W•UT
Two Utensil Trays
SB4227 •W•UT
• No shelf • Removable high -impact, tilt down, white
plastic storage tray installed on backside of drawer front
• Hinge detent holds drawer front in full open position
• Concealed self -enclosing hinging allows drawer front to tilt down 51° for tray access
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
27˝
34 ½˝
27˝
SB2727-SB3627 BUTT
SB4227
Wood Sink Base Full-Height
Specify R or L Single Door
SB24 R or L•W•FH
Double Door
SB24 BUTT•W•FH
SB27 (Butt)•W•FH
SB30 BUTT•W•FH
SB33 BUTT•W•FH
SB36 BUTT•W•FH
SB39 •W•FH
SB42 •W•FH
SB48 •W•FH
• No shelf
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝ SB24
SB24 BUTT-SB48
E13Base Cabinets
Base Cabinets
Deep Sink Base
DSB30
DSB33
DSB36
• No shelf • Designed for use with “farm/farm house”
style sinks • Trimmable face frame rail across top • Face frame center stile included on all
widths to provide extra sink support
Be sure to follow sink manufacturer specifications and instructions to ensure proper fit.
Make sure to choose a cabinet that is at least 4 1/2” wider than the outside sink dimensions
l PE
l APC
RD12
RD15
RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
Cabinet Max Width
DSB30 25 ½˝
DSB33 28 ½˝
DSB36 31 ½˝
9 ½˝
9 ½˝
9 ½˝
Max Height
Maximum Trimmable Opening Sizes
34 ½˝
24˝
Sink Base Angle
Specify R or L
SBA36 R or L
SBA42 R or L
• One full -width false drawer front • Top panel must be cut in field to receive
sink • 29 1/4” minimum doorway clearance
required for delivery with cabinet door removed
• Adjacent cabinets can be installed directly without fillers
• Full overlay sink front door and false drawer front are similar in width to partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
36" or 42"
17" or 25 ½"
24˝
24˝
36" or 42"
18 /˝29 /˝
14 /˝ Ror 25 /˝ R
17˝, 25 ½˝24˝ 24˝
34 ½˝
E14 Base Cabinets
Base
Cab
inet
s
Sink Front
Specify R or L Single Door
SF24 R or L
Double Door
SF24 BUTT
SF30 BUTT
SF36 BUTT
• One full -width false drawer front • Not trimmable • Toe Kick Backer included, shipped
unattached • Bottom panel not supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
• Optional Utensil Tray Kit (UTK) is available in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
34 ½˝
SF24
SF24BUTT-SF36BUTT
Sink Front Full-Height
SF24 BUTT•FH
SF30 BUTT•FH
SF36 BUTT•FH
• Toe Kick Backer included, shipped unattached
• Not trimmable • Bottom panel not supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Sink Front Angle
Specify R or L
SFA36 R or L
SFA39 R or L
SFA42 R or L
• One full -width false drawer front • Full overlay sink front door and false
drawer front are similar in width to partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Toe Kick Backer included, shipped unattached
• Bottom panel not supplied, order separately. See Sink Front Angle Floor (SFAF) in Base Accessories
• Optional Utensil Tray Kit (UTK) is available in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
24˝
36˝, 39˝, 42˝
36˝39˝42˝
17˝ 21 ¼˝ 25 ½˝
Sink Front Angle Full-Height
SFA36 •FH • Invertible for right or left hand use • Full overlay sink front door is similar in
width to partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Toe Kick Backer included, shipped unattached
• Bottom panel not supplied, order separately. See Sink Front Angle Floor (SFAF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
24˝
36˝
36˝
17˝
E15Base Cabinets
Base Cabinets
Removable Sink Front
One Drawer Front
RSF30 BUTT
RSF33 BUTT
RSF36 BUTT Two Drawer Fronts
RSF42
• Designed for easy field conversion from a standard sink base functionality to universal access open space
• Permanently installed countertop support rail is 6 -1/2” high x 3/4” thick solid wood with a factory installed standard height matching false drawer front(s) providing a seamless sink base appearance. (1) full -width drawer front on 30”, 33” and 36” widths; (2) false drawer fronts on 42” wide
• If a shorter countertop support is required when used for universal access as additional vertical clearance, a 3” filler can be used in place of the 6 1/2” high support rail. Order separately
• 3/4” thick removable plywood bottom panel with support hardware / leveling legs and a removable clipped -on toeboard provided
• Matching solid wood baseboard provided for bottom panel support along the kitchen wall
• Frame, doors, floor bottom and toeboard can be flat packed for easy storage in a minimum amount of space
• Frame attached to bottom panel using quick connect (cam -locks) fasteners providing a solid tight joint
• Some field assembly required; instructions and hardware included
• A Universal Access Panel (UAP) can be purchased separately to conceal/protect the water and drain lines. See “Panels” section. Please specify specie and finish
• Doors and frame are shipped pre -assembled
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Universal Access Panel
UAP30
UAP33
UAP36
UAP42
• Designed for optional use with Removable Sink Front (RSF) and Universal Removable Sink Front (URSF)
• Conceals/protects drain and water lines • Includes one 9” and one 15” high, 3/4”
thick laminate plywood panel • Panels are held with hidden spring clips,
removable without tools for easy access to plumbing
• Must be trimmed when Wood Veneer Paneling (WSK) is used on adjacent cabinets
• Installation instructions and mounting hardware included
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
E16 Base Appliance Cabinets
Base
Cab
inet
s
Base Appliance Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - Plywood Ends APC - - - All Plywood Construction RD21 - - Reduce Depth 21” CFO - - - Cabinet Front Only
BMC 30 24 34
code width depth height
Base Oven Cabinet Universal
BOCU30
BOCU33 • Designed for under counter mounting of
single built -in ovens • No back panel allowing full access to electrical
connections • Includes an adjustable oven platform
supported with heavy -duty metal mounting brackets and screws which install into pre -drilled end panel holes at the four corners
• 1/2” end panels • 3” wide trimmable vertical stiles provide oven
opening width adjustment • 10” high trimmable horizontal rail along the
bottom provides opening height adjustment. May be trimmed to 1 1/2”
l PE
l APC
RD21
CFO
Opening Sizes
Cabinet Minimum Opening *Maximum Opening
BOCU30
BOCU33
* Bottom rail trimmed to 1 ½˝ high and top rail removed
24˝ wide x 18 ½˝ high
27˝ wide x 18 ½˝ high 31˝ wide x 28½˝ high
28˝ wide x 28 ½˝ high
34 ½˝
24˝
Drop-In Range Panel
DIP30 • 3/4” thick solid wood panel • Matching front panel may be trimmed to
fit drop -in range • Must be installed between two base cabinets • Toe Kick Backer included, shipped unattached • Matching Toe Kick cover (MTK) is required • Field trim as needed
PE
APC
RD21
CFO
30˝
10˝
¾˝
E17Base Appliance Cabinets
Base Cabinets
Base Microwave Cabinet 34” H w/Deep Bottom Drawer
BMC242434
BMC272434
BMC302434
• Matching interior • 1/2” thick fixed shelf • Deep bottom drawer with full extension slides • Designed for countertop style microwaves • Shelf top surface is 3/16” below face frame rail
top edge • Cabinet opening cannot be trimmed
l PE
l APC
l RD21
l CFO
Opening SizesCabinet
BMC242434
BMC272434
BMC302434
15 /˝ high x 21˝ wide x 23 /˝ deep
15 /˝ high x 24˝ wide x 23 /˝ deep
15 /˝ high x 27˝ wide x 23 /˝ deep
24˝
34 ½˝
Dishwasher Panel
DWP • 5/32” thick veneered plywood panel • 23 3/4” x 26” high panel • Provides finished look to dishwasher • Trimmed to fit installation • Finished one side only
PE
APC
RD21
CFO
GrainDirection
/˝
Dishwasher Raised Panel
DWP •RP • 5/32” thick veneered plywood panel • 23 3/4” x 26” high panel • 22 1/8” wide x 16” high door (both partial and
full overlay) • Provides finished look to dishwasher • Panel trimmed to fit installation • May weigh up to 10 lbs. depending on door
style • Hardware to mount door to panel included • Check with dishwasher manufacturers
instructions prior to installing panel
PE
APC
RD21
CFO
GrainDirection
E18 Base Corner Cabinets
Base
Cab
inet
s
Base Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - - -Plywood Ends APC - - - - - -All Plywood Construction RD12 - - - - -Reduce Depth 12” RD15 - - - - -Reduce Depth 15” RD18 - - - - -Reduce Depth 18” RD21 - - - - -Reduce Depth 21” 1ROT - - - - -1 Roll -out Tray 2ROT - - - - -2 Roll -out Trays 1FWROT - -1 Full Width Tray 2FWROT - -2 Full Width Trays 2DROT - - - -2 Deep Roll -out Trays 2DFWROT -2 Deep Full Width Roll -out Trays CFO - - - - - -Cabinet Front Only
PBBC 27 R •2FWT
code width hinge suffix
Base Blind Corner Cabinet Information
• Base blind corner cabinets provide access to corner space and permit adjustability of up to 2 7/8” maximum to aid in kitchen layout. Consult chart for “pull” dimensions and minimum wall space requirements
• “Pulling” the cabinet away from the corner (adding up to 2 7/8” maximum to the void area), and using the supplied filler and panel, provides clearance for opening doors and drawers when decorative hardware is used
• R or L indicates blind end of cabinet. Please specify • Door hinged on same side as blind • Full overlay products must be pulled the maximum 2 7/8” for proper hardware clearance • Base Filler Overlays (BFOL) available separately for all Full Overlay door styles except Flaxton. Overlays are used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below. • Note: A 3” Base Filler and Blind Panel is included with each BBC cabinet ordered, shipped unattached
BBC39
BBC42
BBC45
BBC48
BBC51
Base Blind
Corner
(C) Frame Opening
Full Overlay
(B) Cabinet
Width
24"
30"
36"
42"
48"
39"
NoPull
MaxPull
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 2 0 ½" h10 ½" w x 2 0 ½" h13 ½" w x 2 0 ½" h16 ½" w x 2 0 ½" h19 ½" w x 2 0 ½" h
DrawerOpening
Door Opening
NoPull
/"
/"
/"
/"
/"
MaxPull
3 /"
3 /"
3 /"
3 /"
3 /"
(A)Wall Space
(D) Door Hardware Clearance
36"
42"
45"
48"
BBC39
BBC42
BBC45
BBC48
BBC51
Base Blind
Corner
(C) Frame Opening
Partial Overlay
(B) Cabinet
Width
24"
30"
36"
42"
48"
39"
NoPull
MaxPull
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 2 0 ½" h10 ½" w x 2 0 ½" h13 ½" w x 2 0 ½" h16 ½" w x 2 0 ½" h19 ½" w x 2 0 ½" h
DrawerOpening
Door Opening
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
36"
42"
45"
48"
1 /"
1 /"
1 /"
1 /"
1 /"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
Blind Right (BR)
Base Blind Corner
AB
D
C
Filler and Panel
Frame Opening
BBC Cabinet (Blind Right)
AdjoiningCabinet
Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
BBCDoor
Adjoining Cabinet Door
Overlay
3˝3˝
34 ½˝
24 /˝
Sink PBBC
PB
Illustration is Right Hand hinging
Kitchen Side
Kitchen Side
Peninsula Side
Peninsula Side
Blind panelw/3” filler
24 /˝
3” Fillerw/toekick
backer
E19Base Corner Cabinets
Base Cabinets
Base Blind Corner
Specify R or L
BBC39 R or L
BBC42 R or L
BBC45 R or L
BBC48 R or L
BBC51 R or L
• R or L indicates blind • One drawer • Blind Panel with 3” filler included, shipped
unattached I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝ Blind Right shown
Peninsula Base Blind Corner Single Door
Specify R or L
PBBC27 R or L
• One adjustable shelf • Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
l 1ROT
l 2ROT
1FWROT
2FWROT
l 2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝
Sink PBBC
PB
Kitchen Side Peninsula Side
Blind panelw/3” filler
24 /˝
3” Fillerw/toekick
backer
Kitchen Side
Peninsula Side
E20 Base Corner Cabinets
Base
Cab
inet
s
Peninsula Base Blind Corner Double Door
PBBC27 BUTT • One adjustable shelf • Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
l 1FWROT
l 2FWROT
2DROT
l 2DFWROT
CFO
Peninsula Base Blind Corner w/Two Full-Width Trays
Specify R or L
PBBC27 R or L•2FWT
PBBC27 BUTT•2FWT
• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Two standard Full -width Roll -out Trays (FWROT)
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝Kitchen Side
Peninsula Side
Peninsula Base Blind Corner w/Two Deep Full-Width Trays
Specify R or L
PBBC27 R or L•2DFWT
PBBC27 BUTT•2DFWT
• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Two Deep Full -width Roll -out Trays (DFWROT)
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝Kitchen Side
Peninsula Side
34 ½˝
24˝ 24˝
14 /˝
9˝
24˝
9˝24˝
33˝
33˝
6˝
6˝
28˝ shelf
diameter
LS33
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
LS36
E21Base Corner Cabinets
Base Cabinets
Lazy Susan
Specify R or L
LS33 R or L
LS36 R or L
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Two piece bi -fold door with independent adjustment
• 168° opening hinges on face frame door • Full Overlay door style face frame stiles
are notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
Wood Lazy Susan
Specify R or L
LS36 R or L•WLS
• Two 32” diameter pie -cut revolving wood shelves
• Shelves rotate independently of doors and each other
• Shelf height cannot be adjusted • Shelf load rating of 15 lbs. per square foot,
not to exceed 50 lbs. • Two piece bi -fold door with independent
adjustment • 33” minimum doorway clearance
suggested for delivery • 168° opening hinges on face frame door • Full Overlay door style face frame stiles are
notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝ 24˝
9 /˝
12˝
24˝
12˝24˝
36˝
36˝
2 /˝
32˝ shelf
diameter
2 /˝
E22 Base Corner Cabinets
Base
Cab
inet
s
Base Corner Fixed Shelf
Specify R or L
BCFS36 R or L
• One fixed, pie -cut shelf in center position • Two piece bi -fold door with independent
adjustment • 168° opening hinges on face frame door • Full Overlay door style face frame stiles
are notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet
door opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝24˝
36˝
24˝ 12˝
14 /˝
36˝
24˝
12˝
6˝
6˝
Lazy Susan Angle
Specify R or L
LSA36 R or L
• Two 28” diameter high impact white plastic rotating shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Adjacent cabinets can be installed directly without fillers
• Requires 36” of wall space in each direction • 29 1/4” minimum doorway clearance
required for delivery with cabinet door removed
• Full and Partial Overlay door widths are similar to avoid interference with adjacent cabinet doors
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
24˝24˝17˝
34 ½˝
17˝
24˝
24˝
36˝
36˝18 /˝
29 /˝
14 /˝ R
E23Base End Run Cabinets
Base Cabinets
Base End Run Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
APC - - All Plywood Construction CFO - - Cabinet Front Only
BEA 12 R
code depth hinge
Base Corner Angle
BCA24 BUTT • One adjustable shelf • For use at the right or left end of cabinet run
or in a corner
l APC
l CFO
24˝
24˝
45
34 ½˝
24˝ 24˝
Base End Corner
BEC24 • One adjustable shelf • Two full -height doors • For use at the right or left end of cabinet run
or in a corner
l APC
l CFO
34 ½˝
24˝ 24˝
22 ½˝
24˝
24˝
17 /˝
17 /˝63.5°
143˝
Base End Angle
Specify R or L
BEA12 R or L
• Two adjustable shelves • Specify right or left hand to designate 12”
deep orientation • Designed to transition from 24” deep base
cabinet to 12” deep base cabinet • 24” deep end not designed to be exposed • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
l APC
l CFO
12˝ 12 /˝
34 ½˝
24˝
/˝
12˝
24˝12 /˝
17˝
45°
E24 Base Specialty Cabinets
Base
Cab
inet
s
Base Specialty Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction
BWBT 18 •2
code width suffix
Base Filler Pull-Out
BFP3
2 3/4” shelf width; 1 3/4” usable space between chrome rails; 3 1/16” required between adjacent cabinets
BFP6
5 3/4” shelf width; 4 3/4” usable space between chrome rails; 6 1/16” required between adjacent cabinets
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Three adjustable hardwood shelves • Full extension runners; one on top, two on
bottom • Must be installed between two base cabinets • Natural finish hardwood interior
Do not use filler pullouts at the end of cabinet runs or next to appliances. They must be installed
between two cabinets or a cabinet and an end panel
PE
APC
3˝, 6˝
29 /˝34½˝
Base Pantry Pull-Out
BPP9 • Four -tier (three adjustable fixed shelves) maple base organizer with clear coat finish
• Full -height door attached to pull -out • Tiers are 3 3/4” wide • 1/4” diameter chrome plated steel rail side
extensions help prevent stored items from falling out, yet still viewable
• White epoxy coated full -extension ball bearing slides
l PE
l APC
34 ½˝
24˝
Base Top Mount Wastebasket – Single
BWBT15 • One standard height full -width drawer • Includes one 35 qt. white plastic basket and
one 5 1/2” deep white plastic tray for garbage bag storage
• Basket is easily removable for emptying or cleaning
• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides
l PE
l APC
34 ½˝
24˝
E25Base Specialty Cabinets
Base Cabinets
Base Top Mount Wastebasket – Double
BWBT18 •2 • One standard height full -width drawer • Includes two 35 qt. capacity white baskets • Basket are easily removable for emptying or
cleaning • Top mounted wastebasket assembly rolls out
on full -extension ball -bearing slides
l PE
l APC
34 ½˝
24˝
E26 Base Accessories
Base
Cab
inet
s
Base Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
BFOL 3 •30
code width suffix
Base Wastebasket ROT Floor Mount Kit
BWBFMK .ROT • Requires base cabinet roll -out tray in the bottom position, not included
• Fits base cabinets 15” or wider • White epoxy coated wire • Includes 30 -qt. white plastic bin • Installation instructions and mounting
hardware included
C
M
O
9 ½˝
18˝
15 ½˝
Base Wastebasket Floor Mount Kit
BWBFMK .2 • Bins mounted on white laminated platform with full extension slides
• 11 1/2” wide pull out, fits minimum 15” single door cabinet or 27” double door cabinet unless cabinet is butt door
• White epoxy coated wire • Includes two 27 -qt. white plastic bins • Load rated at 40 lbs. • Does not fit 9” or 12” wide base or 27” wide
base with center stile • Installation instructions and mounting
hardware included
C
M
O
22˝ 11 ½˝
19 ½˝
Base Blind Corner Lazy Susan Kit
LSK45
LSK48 • Two high -impact plastic half -moon swing -
out shelves in white • LSK45 shelves supports up to 45 lbs. and is
31 9/16” x 12 1/2”; requires 13 1/4” minimum cabinet opening (BBC45)
• LSK48 shelves supports up to 45 lbs. and is 33” x 15 1/2”; requires 16 1/16” minimum cabinet opening (BBC48 and BBC51)
• Bottom shelf pulls out for easy access • Fixed height shelves attach to center post
(included) and rotate independently to 90° • Installation instructions and mounting
hardware included
C
M
O
33˝
BSOS48 shown
15 ½˝
E27Base Accessories
Base Cabinets
Wire Tray Divider Roll-out
WTDRO9 2 partitions
WTDRO12 3 partitions
• White epoxy coated wire • 3/4 extension sides • For 9” or 12” wide base cabinets • Load rated at 20 lbs. • Installation instructions and mounting
hardware included
C
M
O
6 /˝ 9 /˝
13 ¾˝
22˝
WTDR09 shown
Wire Tray Divider Kit
WTDK16 • White epoxy coated wire • Installation instructions and mounting
hardware included
C
M
O
11˝
16˝
Under Sink Tote
UST12
UST15 • White epoxy coated wire • Designed for under sink storage; maximizes
space around plumbing fixtures • 3/4 extension roll -out assembly mounts to
floor of cabinet • Load rated at 20 lbs. • Installation instructions and mounting
hardware included
C
M
O
18 /˝
15 ¼˝
12˝ 15˝
Foil Box Rack
FBRK18 • White epoxy coated wire • Installation instructions and mounting
hardware included • Designed to fit a Sink Base 36 (SB36)
C
M
O
8˝
6 ¼˝11 ¼˝
E28 Base Accessories
Base
Cab
inet
s
Door Mount Towel Bar
DMTB • White epoxy coated wire • Three 10” long towel bars • Designed to fit SB33 cabinets or wider • Installation instructions and mounting
hardware included
C
M
O
12 /˝
Sliding Towel Bar
STB • Three -prong chrome -plated 17” long wire towel bars
• Mounts to interior of cabinet side panel • Slides on ball bearing slides • Designed for sink base or 21” deep vanity
bowl cabinets • Installation instructions and mounting
hardware included
C
M
O
17 /˝(unextended)
Drawer Partition
DPK • Natural finish hardwood • Kit contains two self -adhesive end brackets
and one natural finished hardwood divider • Brackets are clear plastic and include two
holes for optional screw attachment to drawer side (screws not included)
• For use in all drawers and Deep Roll -out Trays (DROT)
• Field trim divider to fit • Installation instructions and mounting
hardware included
C
M
O
Partition
BracketDrawer Side
or Front/Back
½˝
3 /˝20 ½˝
2 /˝
19 /˝9 /˝
2 /˝
19 /˝ 15 /˝
(including dividers)
DOKWSuggested layouts are shown
(including dividers)
DOKNSuggested layouts are shown
E29Base Accessories
Base Cabinets
Drawer Organizer Kit
DOKN
DOKW • Natural finish hardwood • Adjustable drawer organizing system • DOKN fits B15 and wider drawers • DOKW fits B21 and wider drawers • DOKN includes: two dividers 14 17/32” long x 2 1/4” high x 3/8” thick; three dividers 2 11/16” long x 2 1/4” high x 3/8” thick; four dividers 4 1/4” long x 2 1/4” high x 3/8” thick • DOKW includes: three dividers 14 17/32” long x 2 1/4” high x 3/8” thick; four dividers 2 17/32” long x 2 1/4” high x 3/8” thick; two dividers 5 17/32” long x 2 1/4” high x 3/8” thick; four dividers 8 17/32” long x 2 1/4” high x 3/8” thick • Installation instructions and mounting hardware included
C
M
O
Cutlery Divider
CDK18 • Five compartment cutlery organizer for 18” wide cabinets; can be cut down for 15” wide cabinets
• Natural woodgrain laminate • 1 7/16” must be field cut off back edge • Note: Field install only
C
v M
O
2 ½˝
12 /˝20 /˝
Spice Drawer Insert Kit
Height Width
SDIK15 1 5/8” 10”
SDIK18 1 5/8” 13”
SDIK21 1 5/8” 16”
SDIK24 1 5/8” 19”
• Textured white polymer plastic • Trimmed to fit installation
C
M
O
1 /˝19 /˝
10˝ 13˝ 16˝ 19˝
E30 Base Accessories
Base
Cab
inet
s
Pegged Deep Drawer Organizer
Width
PDO30 27 1/2”
PDO36 30 7/8”
• Natural finish hardwood • For securing pots, pans, plates and other bulky items in deep
drawers of cabinets • Kit includes eight 6” long triangular shaped natural finished
solid hardwood pegs with a metal locating pin extended out of one end
• Additional triangular hardwood pegs are available in quantity of 4; order SKU: PDOPK/4CT
C
M
O
19 /˝
6 ½˝
Utensil Tray Kit
UTK12
UTK22
• Removable high -impact white plastic tray installs on backside of drawer front for convenient out -of -sight storage of small items, soap, scouring pads, etc.
• Installation instructions and mounting hardware included
• UTK22 fits sink base cabinets 27” through 39” wide • UTK12 fits sink base cabinets 30” or wider • Concealed self -closing hinges allow drawer front to tilt down
51º for tray access • Hinge detent holds drawer front in full open position • Order decorative hardware separately
If installing one UTK12 on a 24” or 27” wide sink base, consider utilizing the second tray on the backside for storage
C
M
O
2˝
UTK22
3 /˝11˝
3 /˝ 22˝
UTK12
2 /˝
Toe Kick
Laminate - 1/8” thick MDF
MTK8
MTK8 •4 Wood Veneer - 5/32” thick plywood
WMTK8
WMTK8 •4
• Edges are unfinished • Field installation only • Offered individually or four per carton (32 ft.) • Note: Matching toe kick is not automatically supplied with
cabinets. It must be ordered as a separate item
v C
v M
v O
96˝
4 /˝
Toe Kick Backer
TKBK6
TKBK36 • Plywood construction • Provides support for matching toe kick cover • Shipped assembled • Field trim as needed • TKBK6 for use with Base Fillers (BF3 and BF6) • TKBK36 for use with Sink Fronts (SF and SFA) and Drop -in
Range Panel (DIP30)
v C
v M
v O
6˝
36˝
E31Base Accessories
Base Cabinets
Sink Front Floor
SFF2336 • 3/8” thick engineered wood with easy clean natural woodgrain laminate on one side; backside unfinished
• Natural woodgrain laminate • Grain direction runs lengthwise • Field trim as needed • Installation screws included • Available in All Plywood Construction (APC)
C
M
O
23 /˝ 36 /˝
/˝
Sink Front Angle Floor
SFAF4242 • 3/8” thick engineered wood with easy clean natural woodgrain laminate on one side; backside unfinished
• Natural woodgrain laminate • Field trim as needed • Installation screws included • Available in All Plywood Construction (APC)
C
M
O
42 /˝42 /˝
/˝
Base Filler
BF3
BF6
BF3X3
• 3/4” thick solid wood • BF3 and BF6 Toe Kick included, shipped
unattached • LBF3X3 shipped assembled • Backside of filler not finished
v C
v M
v O
3˝, 6˝
34 ½˝
¾˝
3˝x 3˝
34 ½˝
¾˝
BF3BF6
BF3x3
Base Filler Overlay
BFOL3•30
BFOL6•30
BFOL3X3
• BFOL3 or BFOL6 attaches to 3” or 6” wide filler, not included. Order separately
• BFOL3x3 includes filler and toe kick, shipped assembled
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included • Available for all full overlay door styles except
Flaxton
v C
v M
v O
29 ¼˝
2 /˝ 5 /˝ 3˝ x 3˝
34 ½˝29 ¼˝
BFOL3BFOL6
BFOL3x3
E32 Base Accessories
Base
Cab
inet
s
Base Fluted Filler
BFF3 • 3/4” thick solid wood • Use between cabinets or to create a column
effect. Can be combined with other moldings and panels for decorative effects
• Four flutes • Backside of filler not finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
34 ½˝
3˝
¾˝
/˝
Base Box
BB3
BB6 • Front is 3/4˝ solid wood • End panels are recessed 1/4” • Finished front and both sides • Vertical wood grain • May be used on either right or left end • Not available in All Plywood Construction
(APC) • Available with Plywood Ends (PE)
v C
v M
v O
24˝ 3˝, 6˝
34 ½˝
¾˝¼˝
Base Column
3” Wide
BC315
BC327
6” Wide
BC615
BC627
• Front is 3/4˝ solid wood • Finished front and both sides • No toe kick • Vertical wood grain • Flush end panels • Not available in All Plywood Construction
(APC) • Available with Plywood Ends (PE)
v C
v M
v O¾˝
15˝, 27˝ 3˝, 6˝
34 ½˝
Base Fluted Column
BFC615
BFC627 • Fluted front is 3/4” solid wood • Six flutes • Finished front and both sides • No toe kick • Flush end panels • Vertical wood grain • May be used on either right or left end • Not available in All Plywood Construction
(APC) • Available with Plywood Ends (PE)
v C
v M
v O¾˝
15˝, 27˝ 6˝
34 ½˝
6˝
1 ½˝
E33Base Accessories
Base Cabinets
Base End Panel w/Stile
BEP3
BEP6 • For right or left hand use • The mounting cleat is finished but is not a
matching wood species to the face • Toespace notch must be field cut • Available with Plywood Ends (PE) • Available in All Plywood Construction (APC)
v C
v M
v O
24˝
34 ½˝
3˝, 6˝Field cutToespace
Stile
Matching Base End Panel
MBEP2434 • Provides a finished furniture look to 34 1/2” base cabinets
• Includes end panel with decorative door • For right or left hand use • 5/32” thick veneered plywood panel • Full overlay door styles shipped unattached to
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• Field installation only • Toespace notch must be field cut
v C
v M
v O
Field cutToespace
/˝
34 ½˝
23 ¼˝
Item
MBEP2434 23 ¼˝
Width
34 ½˝
Height
29 ¼˝
Height
23 /˝
Width
28˝
Height
22 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
E34 Notes
Notes
Base
Cab
inet
s
F1Tall Cabinets
Tall Cabinets
Tall Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction RD9 - - Reduce Depth 9” RD12 - Reduce Depth 12” RD15 - Reduce Depth 15” RD18 - Reduce Depth 18” RD21 - Reduce Depth 21” CFO - - Cabinet Front Only
U 15 12 84 R
code width depth height hinge
Utility Cabinets 12” Deep
Specify R or L 84” High
U151284 R or L
U181284 R or L
U241284 R or L
U241284 BUTT
U301284 BUTT
U361284 BUTT 90” High
U151290 R or L
U181290 R or L
U241290 R or L
U241290 BUTT
U301290 BUTT
U361290 BUTT
Specify R or L 93” High
U151293 R or L
U181293 R or L
U241293 R or L
U241293 BUTT
U301293 BUTT
U361293 BUTT 96” High
U151296 R or L
U181296 R or L
U241296 R or L
U241296 BUTT
U301296 BUTT
U361296 BUTT
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• If arch configuration is required for upper door(s), please specify
• Bottom, Tall doors are two -piece panel construction except Flaxton which have a single raised panel
• 30” and 36” wide cabinets have 3” wide center stile in upper section only
• Interior height of tall section on 84”, 93” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• End panels of bottom section are pre -drilled for optional shelves
• Note: Shelf Kit (SK) for lower section must be ordered separately; see Shelving section of this book
If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
l PE
l APC
l RD9
RD12
RD15
RD18
RD21
l CFO
12˝
84˝90˝93˝96˝
12˝
84˝90˝93˝96˝
U15-U24
U24BUTT-U36BUTT
F2 Tall Cabinets
Tall
Cabi
nets
Utility Cabinets 24” Deep
Specify R or L 84” H
U152484 R or L
U182484 R or L
U242484 R or L
U242484 BUTT
U302484 BUTT
U362484 BUTT 90” High
U152490 R or L
U182490 R or L
U242490 R or L
U242490 BUTT
U302490 BUTT
U362490 BUTT
Specify R or L 93” High
U152493 R or L
U182493 R or L
U242493 R or L
U242493 BUTT
U302493 BUTT
U362493 BUTT 96” High
U152496 R or L
U182496 R or L
U242496 R or L
U242496 BUTT
U302496 BUTT
U362496 BUTT
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• If arch configuration is required for upper door(s), please specify
• Bottom, Tall doors are two -piece panel construction except Flaxton which have a single raised panel
• 30” and 36” wide cabinets have 3” wide center stile in upper section only
• Interior height of tall section on 84”, 93” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• End panels of bottom section are pre -drilled for optional shelves
• Note: Shelf Kit (SK) for lower section must be ordered separately; see Shelving section of this book
If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
l PE
l APC
l RD9
l RD12
l RD15
l RD18
l RD21
l CFO
24˝
84˝90˝93˝96˝
24˝
84˝90˝93˝96˝
U15-U24
U24BUTT-U36BUTT
Pantry Cabinet
PC362484 BUTT
PC362490 BUTT
PC362493 BUTT
PC362496 BUTT
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• 3” wide center stile in upper section only • 93” and 96” tall cabinets include toe kick
platform, shipped unattached • Toe Kick cover required on exposed sides of
toe kick platform • If arch configuration is required for upper
door(s), please specify • Tall doors are pre -drilled for mounting Door
Pantry Rack (DPR), • Full overlay doors require special hardware for
Door Pantry Rack (DPR) installation; included with kit
• Bottom, Tall doors are two -piece panel construction except Flaxton which have a single raised panel
• 1” thick center partition runs full height in bottom section
• End panels and center partition in bottom section are pre -drilled for half -depth adjustable shelves (not included)
• Will not accept Roll -out Trays (ROT) • Pantry Cabinet can be installed next to a wall
or refrigerator. Optional interior racks will function if door opening is restricted to no less than 90°
• Reinforced cabinet bottom
l PE
l APC
RD9
RD12
RD15
RD18
RD21
l CFO
84˝90˝93˝96˝
24˝
PCSK3612 PCSK3612
SPRSPR
DPR18 DPR18
36˝
24˝
Pantry Cabinet Accessory Configuration
F3Tall Appliance Cabinets
Tall Cabinets
Tall Appliance Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - Plywood Ends APC - - All Plywood Construction RD9 - - Reduce Depth 9” RD12 - Reduce Depth 12” RD15 - Reduce Depth 15” RD18 - Reduce Depth 18” RD21 - Reduce Depth 21” CFO - - Cabinet Front Only
OC 33 24 90
code width depth height
Oven Cabinet – Single w/3” Stiles
84” High
OC272484 (Butt)S
OC302484 BUTTS
OC332484 BUTTS 90” High
OC272490 (Butt)S
OC302490 BUTTS
OC332490 BUTTS
93” High
OC272493 (Butt)S
OC302493 BUTTS
OC332493 BUTTS 96” High
OC272496 (Butt)S
OC302496 BUTTS
OC332496 BUTTS
• Fixed shelf between top and middle section. Adjustable shelves in top section: 84” high–no shelves; 90” high and 93” high–1 shelf; 96” high–2 shelves
• One adjustable shelf in bottom section • Cabinet doors are: 5 1/2” shorter on top than the
bottom for 84” high cabinets, are equal height on 90” high cabinets, 3 1/2” taller on top than the bottom for 93” high cabinets and are 6 1/2” taller on top than the bottom for 96” high cabinets
• Center section accommodates single ovens • 93” and 96” tall cabinets include toe kick platform, shipped
unattached • 3” wide, trimmable stiles provide opening width adjustment for
painted finishes. All other finishes have 1 1/2” wide removable, trimmable vertical stiles for easy adjustment
• Toe Kick cover required on exposed sides of toe kick platform • See Cabinet Specifications and Options for oven cutout dimensions
l PE
l APC
RD9
RD12
RD15
RD18
RD21
l CFO
84˝90˝93˝96˝
24˝
Oven Cabinet – Universal
84” High
OC272484 (Butt)U
OC302484 BUTTU
OC332484 BUTTU 90” High
OC272490 (Butt)U
OC302490 BUTTU
OC332490 BUTTU
93” High
OC272493 (Butt)U
OC302493 BUTTU
OC332493 BUTTU 96” High
OC272496 (Butt)U
OC302496 BUTTU
OC332496 BUTTU
• Fixed shelf between top and middle section. Adjustable shelves in top section: 84” high–no shelves; 90” high and 93” high–1 shelf; 96” high–2 shelves
• Three full -width drawer openings at bottom • Includes one full -width drawer. Order additional
drawer(s) as needed. See Oven Drawer Kit (ODK) • Face -mounted door hinges provide matching frame
reveals • Center section accommodates single and double
ovens by trimming or removing horizontal cross rails • Face frame rails are attached to stiles with screws on the back
side for easy removal • 93” and 96” tall cabinets include toe kick platform, shipped
unattached • 3” wide, trimmable stiles provide opening width adjustment
for painted finishes. All stain finishes have 1 1/2” wide removable, trimmable vertical stiles for easy adjustment
• Toe Kick cover required on exposed sides of toe kick platform • See Cabinet Specifications and Options for oven cutout
dimensions
l PE
l APC
RD9
RD12
RD15
RD18
RD21
l CFO
84˝90˝93˝96˝
24˝
Oven Drawer Kit
ODK27
ODK30
ODK33
• Available in all door styles • Kit includes; 1 drawer front, 1 drawer core, slides and
all mounting hardware
PE
APC
RD9
RD12
RD15
RD18
RD21
CFO
F4 Tall Accessories
Tall
Cabi
nets
Tall Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
MTEP 21 96
code width height
Door Pantry Rack
DPR18 • Solid, natural finished, hardwood unit, adjustable shelves and fences
• Includes: six adjustable shelves, 12 wire supports and seven 2” high fences
• Rack is designed to support up to 50 lbs (3 1/2 lbs. per shelf)
• Mounts to backsides of tall doors on all pantry and 18” or 36” wide utility cabinets,
• Full Overlay door styles require drilling at the bottom end of rack and special hardware that is included for Door Pantry Rack installation
C
M
O58 ¼˝
11˝
4 /˝
Swing-Out Pantry Rack
SPR • Solid, natural finished, hardwood unit, adjustable shelves, fences and wire shelf supports
• Includes: 12 adjustable shelves, 24 wire shelf supports and 14 - 2” high fences
• Rack is designed to support up to 50 lbs., (3 1/2 lbs. per shelf)
• Pantry cabinet is pre -drilled for installation • Mounting hardware included
C
M
O
11˝
58 ¼˝
8˝
Pantry Cabinet Shelf Kit
10 19/32” Deep x 16 1/2” Wide
PCSK3612
• For use in bottom section of 36” wide pantry cabinets
• 3/4” thick engineered wood • Shelves are laminated on both sides with
matching edge banding on front edge • Natural woodgrain laminate • Kit includes five shelves and 20 clear
polycarbonate shelf supports per carton • Order two kits to add five shelves to both
halves of a pantry cabinet • Available in All Plywood Construction (APC)
v C
v M
v O
F5Tall Accessories
Tall Cabinets
Oven Cabinet Support Platform
OCSP27
OCSP30
OCSP33
• For installing second appliance in Oven Cabinet Universal (OC_U)
• Same shelf platform and hardware as included with Oven Cabinet Universal (OC_U)
• Available in All Plywood Construction (APC) • Includes four heavy -duty metal mounting
brackets and eight screws which install into pre -drilled holes in cabinet end panels
C
M
O
Tall Filler
TF3•84
TF3•90
TF3•93
TF3•96
• 3/4” thick solid wood • Toe Kick included, shipped unattached • Backside of filler not finished
v C
v M
v O
84˝90˝93˝96˝
3˝
¾˝
Tall Filler Overlay
TFOL3•84
TFOL3•90
TFOL3•93
TFOL3•96
• Attaches to 3” wide fillers, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included • Available for all full overlay door styles except
Flaxton • Specify door style, specie and finish
v C
v M
v O
2 /˝
78 ¾˝84 ¾˝87 ¾˝90 ¾˝
Tall Fluted Filler
TFF3•84
TFF3•90
TFF3•93
TFF3•96
• Use between cabinets or to create a column effect. Can be combined with other moldings and panels for decorative effects
• 3/4” thick solid wood • Four flutes • Backside of filler not finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
84˝90˝93˝96˝
3˝
¾˝/˝
F6 Tall Accessories
Tall
Cabi
nets
Tall End Panel
Engineered Wood Finished both sides
DWTEP96 96”x32”x3/4”
• Use next to refrigerator to conceal side, also supports 24” deep wall cabinet over refrigerator
• 3/4” thick engineered wood core with vertical grain on both sides for Cherry, Maple and Oak
• Available in All Plywood Construction (APC)
v C
v M
v O32˝
96˝
Grain Direction
One long edge
finished
¾˝
Tall End Panel w/Stile
TEP 1 1/2•84
TEP 1 1/2•96 • Use next to refrigerator to conceal side,
also supports 24” deep wall cabinet over refrigerator
• 1/2” thick plywood finished to match • Toespace notch must be field cut
v C
v M
v O24˝
84˝or
96˝
1 ½˝Wide Filler
Field cutToespace
Matching Tall End Panel
84” High
MTEP1284
MTEP2184
MTEP2484 90” High
MTEP1290
MTEP2190
MTEP2490
93” High
MTEP1293
MTEP2193
MTEP2493 96” High
MTEP1296
MTEP2196
MTEP2496
• Provides a finished furniture look to Oven Cabinet Single (OC_S), Oven
Cabinet Universal (OC_U), Pantry Cabinet (PC_), Utility Cabinet (UC_) and Vanity
Linen Tall (VLC_) cabinet ends • For right or left hand use • 5/32” thick panel with matching decorative door • If arch configuration is required for upper door(s),
please specify • Full Overlay door styles (both square and arch style
doors) overlap cabinet frame to match reveals • Toespace notch must be field cut • Doors and panel are shipped separately; field assembly
required
v C
v M
v O
FieldcutToespace
11 ¼˝, 20 ¼˝, 23 ¼˝
Grain Direction
84˝90˝93˝96˝
Panel
Panel
Item
MTEP1284
MTEP1290
MTEP1293
MTEP1296
MTEP2184
MTEP2190
MTEP2193
MTEP2196
MTEP2484
MTEP2490
MTEP2493
MTEP2496
11 ¼˝
11 ¼˝
11 ¼˝
11 ¼˝
20 ¼˝
20 ¼˝
20 ¼˝
20 ¼˝
23 ¼˝
23 ¼˝
23 ¼˝
23 ¼˝
Width
84˝
90˝
93˝
96˝
84˝
90˝
93˝
96˝
84˝
90˝
93˝
96˝
Height
Panel Size
G1Vanity Cabinets
Vanity Cabinets
Vanity Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard vanity cabinet box depth is 18” or 21” unless stated otherwise. Add door thickness for total depth. Standard vanity cabinet height is 34 1/2” unless stated otherwise.
All double door cabinets will have butt doors unless stated otherwise. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - - All Plywood Construction RD9 - - - - Reduce Depth 9” RD12 - - - Reduce Depth 12” RD15 - - - Reduce Depth 15” RD18 - - - Reduce Depth 18” CFO - - - - Cabinet Front Only
VCD 42 18 34 •8
code width depth height suffix
Vanity Sink Base Double Door
31 1/2” High, 18” Deep One Drawer Front
sVSB241831 BUTT
sVSB271831 (Butt)
sVSB301831 BUTT
sVSB331831 BUTT
sVSB361831 BUTT
sVSB391831 Two Drawer Fronts
sVSB421831 34 1/2” High, 18” Deep
One Drawer Front
sVSB241834 BUTT
sVSB271834 (Butt)
sVSB301834 BUTT
sVSB331834 BUTT
sVSB361834 BUTT
sVSB391834 Two Drawer Fronts
sVSB421834
31 1/2” High, 21” Deep One Drawer Front
VSB242131 BUTT
VSB272131 (Butt)
VSB302131 BUTT
VSB332131 BUTT
VSB362131 BUTT
VSB392131 Two Drawer Fronts
VSB422131 34 1/2” High, 21” Deep
One Drawer Front
VSB242134 BUTT
VSB272134 (Butt)
VSB302134 BUTT
VSB332134 BUTT
VSB362134 BUTT
VSB392134 Two Drawer Fronts
VSB422134
• False drawer front(s) • No shelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝
31 ½˝34 ½˝
18˝, 21˝
VSB24 BUTT-VSB39
VSB42
s Reduce to 18” depth not available
G2 Vanity Cabinets
Van
ity
Cabi
nets
Vanity Sink Base Three Door
31 1/2” High, 18” Deep
sVSB421831 •2
sVSB481831 •2
sVSB541831 •2 34 1/2” High, 18” Deep
sVSB421834 •2
sVSB481834 •2
sVSB541834 •2
31 1/2” High, 21” Deep
VSB422131 •2
VSB482131 •2
VSB542131 •2 34 1/2” High, 21” Deep
VSB422134 •2
VSB482134 •2
VSB542134 •2
• False front only between drawers • Two standard drawers • Center door is hinged right • Space between drawers for sink installation
is 21” • 54” wide cabinets have a 3 3/16” wide full -
width support cross rail across top front of cabinet
• Back panel is pre -drilled for Roll -Out Trays (ROT) behind center door on VSB54
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
12˝15˝18˝
12˝15˝18˝
18˝18˝18˝
s Reduce to 18” depth not available
Vanity Sink Base Four Door
18” Deep
sVSB601831 •2
sVSB601834 •2 21” Deep
VSB602131 •2
VSB602134 •2
• False front only between drawers • Two standard height top drawers • Door left of center hinged left, door right
of center hinged right • Actual cabinet width is 59 1/2”, frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Space between drawers for sink installation is 31 3/4”
• 3 3/16” wide full -width support crossrail across top front of cabinet
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
s Reduce to 18” depth not available
Vanity Sink Base Two Drawer
18” Deep
sVSB361831 •2
sVSB361834 •2
21” Deep
VSB362131 •2
VSB362134 •2
• False front only between drawers • Space between drawers for sink installation
is 18” • Note: When depth is reduced to 12” or
15”, drawers become a false front • Note: Two standard height top drawers.
Drawer fronts are offset from drawer core. This limits the sizes of pulls that can be positioned in the middle of the drawer front to pulls with 6” centers or 3” and narrower centers. See details.
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
RIGHT HAND DRAWER SHOWN
3" centersor less
CL of drawer frontCL of drawer front
6" centers
18˝, 21˝
31 ½˝34 ½˝
s Reduce to 18” depth not available
Vanity Sink Base Three Drawer
18” Deep
sVSB541831 •3
sVSB601831 •3 21” Deep
VSB542131 •3
VSB602131 •3
• False drawer fronts above each door • One standard drawer • Two deep drawers • 3 3/16” wide full -width support crossrail
across top front of cabinet • Opening on each end for sink installation is
18 7/8” for 54” cabinet and 21 1/4” for 60” cabinet
• Actual cabinet width for VSB60 is 59 1/2”, frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Optional Accessory Roll -Out Trays (ROT) available for 54” wide cabinets only
• Back panel is not pre -drilled • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝
21˝20 ¾˝
12˝18˝
21˝20 ¾˝
18˝, 21˝
s Reduce to 18” depth not available
G3Vanity Cabinets
Vanity Cabinets
Vanity Sink Base Four Drawer
18” Deep
sVSB541834 •4
sVSB601834 •4 21” Deep
VSB542134 •4
VSB602134 •4
• False drawer fronts above each door • Three standard drawers • One deep drawer • 3 3/16” wide full -width support cross rail
across top front of cabinet • Actual cabinet width for VSB60 is 59 1/2”,
frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Optional Accessory Roll -Out Trays (ROT) available for 54” wide cabinets only
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
34 ½˝
21˝20 ¾˝
12˝18˝
21˝20 ¾˝
18˝, 21˝
s Reduce to 18” depth not available
Vanity Combination Drawer (2)
31 1/2” High, 18” Deep
sVCD241831 DL2
sVCD301831 DL2
sVCD361831 DL2 31 1/2” High, 21” Deep
VCD242131 DL2
VCD302131 DL2
VCD362131 DL2
31 1/2” High, 18” Deep
sVCD241831 DR2
sVCD301831 DR2
sVCD361831 DR2 31 1/2” High, 21” Deep
VCD242131 DR2
VCD302131 DR2
VCD362131 DR2
• One full -width false drawer front above door and drawers
• Two deep drawers • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝
s Reduce to 18” depth not available
Vanity Combination Drawer (3)
34 1/2” High, 18” Deep
sVCD241834 DL3
sVCD301834 DL3
sVCD361834 DL3 34 1/2” High, 21” Deep
VCD242134 DL3
VCD302134 DL3
VCD362134 DL3
34 1/2” High, 18” Deep
sVCD241834 DR3
sVCD301834 DR3
sVCD361834 DR3 34 1/2” High, 21” Deep
VCD242134 DR3
VCD302134 DR3
VCD362134 DR3
• One full -width false drawer front above door and drawers
• Two standard drawers • One deep drawer • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18”, 21˝
34 ½˝
s Reduce to 18” depth not available
G4 Vanity Cabinets
Van
ity
Cabi
nets
Vanity Combination Drawer (6)
31 1/2” High, 18” Deep
sVCD421831 •6
sVCD481831 •6
sVCD601831 •6 31 1/2” High, 21” Deep
VCD422131 •6
VCD482131 •6
VCD602131 •6
• Two standard height top drawers and four deep lower drawers
• Drawer front only between top drawers • VCD42 and VCD48 center door are hinged
right • VCD42 and VCD48 space between drawers for
sink installation is 21” • VCD60 space between drawers for sink
installation is 31 3/4” • VCD60 actual cabinet width is 59 1/2”, frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Accessory Roll -Out Trays (ROT) not available for VCD60 cabinets
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝
VCD42-48
VCD60
28
3 8
3 8
3 4
18˝, 21˝
31 ½˝
12˝15˝
12˝15˝18˝
18˝
s Reduce to 18” depth not available
Vanity Combination Drawer (8)
34 1/2” High, 18” Deep
sVCD421834 •8
sVCD481834 •8
sVCD601834 •8 34 1/2” High, 21” Deep
VCD422134 •8
VCD482134 •8
VCD602134 •8
• Six standard height and two deep drawers • Drawer front only between top drawers • VCD42 and VCD48 center door are hinged
right • VCD42 and VCD48 space between drawers
for sink installation is 21” • VCD60 space between drawers for sink
installation is 31 3/4” • VCD60 actual cabinet width is 59 1/2”, frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Accessory Roll -Out Trays (ROT) not available for VCD60 cabinets
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
21˝
34 ½˝
28
3 8
3 8
3 4
34 ½˝
18˝, 21˝ VCD42-48
VCD60
12˝15˝
12˝15˝18˝
18˝
s Reduce to 18” depth not available
G5Vanity Cabinets
Vanity Cabinets
Vanity Base Single Door
Specify R or L 31 1/2” High, 18” Deep
sVB121831 R or L
sVB151831 R or L
sVB181831 R or L
sVB211831 R or L
sVB241831 R or L 34 1/2” High, 18” Deep
sVB121834 R or L
sVB151834 R or L
sVB181834 R or L
sVB211834 R or L
sVB241834 R or L
Specify R or L 31 1/2” High, 21” Deep
VB122131 R or L
VB152131 R or L
VB182131 R or L
VB212131 R or L
VB242131 R or L 34 1/2” High, 21” Deep
VB122134 R or L
VB152134 R or L
VB182134 R or L
VB212134 R or L
VB242134 R or L
• One standard drawer • Note: When depth is reduced to
12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
s Reduce to 18” depth not available
Vanity Base Double Door
31 1/2” High
sVB241831 BUTT
VB242131 BUTT 34 1/2” High
sVB241834 BUTT
VB242134 BUTT
• One full -width drawer • Note: When depth is reduced to
12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
s Reduce to 18” depth not available
Vanity Base Full-Height Single Door
Specify R or L 31 1/2” High, 18” Deep
sVB181831 R or L•FH
sVB211831 R or L•FH
sVB241831 R or L•FH 34 1/2” High, 18” Deep
sVB181834 R or L•FH
sVB211834 R or L•FH
sVB241834 R or L•FH
Specify R or L 31 1/2” High, 21” Deep
VB182131 R or L•FH
VB212131 R or L•FH
VB242131 R or L•FH 34 1/2” High, 21” Deep
VB182134 R or L•FH
VB212134 R or L•FH
VB242134 R or L•FH
• Full -height door • No shelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝ s Reduce to 18” depth not available
G6 Vanity Cabinets
Van
ity
Cabi
nets
Vanity Base Full-Height Double Door
31 1/2” High, 18” Deep
sVB241831 BUTT•FH
sVB271831 (Butt)•FH
sVB301831 BUTT•FH
sVB331831 BUTT•FH
sVB361831 BUTT•FH
sVB391831 •FH
sVB421831 •FH 34 1/2” High, 18” Deep
sVB241834 BUTT•FH
sVB271834 (Butt)•FH
sVB301834 BUTT•FH
sVB331834 BUTT•FH
sVB361834 BUTT•FH
sVB391834 •FH
sVB421834 •FH
31 1/2” High, 21” Deep
VB242131 BUTT•FH
VB272131 (Butt)•FH
VB302131 BUTT•FH
VB332131 BUTT•FH
VB362131 BUTT•FH
VB392131 •FH
VB422131 •FH 34 1/2” High, 21” Deep
VB242134 BUTT•FH
VB272134 (Butt)•FH
VB302134 BUTT•FH
VB332134 BUTT•FH
VB362134 BUTT•FH
VB392134 •FH
VB422134 •FH
• Full -height doors • No shelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝ s Reduce to 18” depth not available
Vanity Base Full-Height Three Door
31 1/2” High, 18” Deep
sVB481831 •FH
sVB541831 •FH 34 1/2” High, 18” Deep
sVB481834 •FH
sVB541834 •FH
31 1/2” High, 21” Deep
VB482131 •FH
VB542131 •FH 34 1/2” High, 21” Deep
VB482134 •FH
VB542134 •FH
• Full -height doors • No shelf • Center door is hinged right
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝ 15˝18˝
18˝18˝
15˝18˝
s Reduce to 18” depth not available
Vanity Base Full-Height Four Door
31 1/2” High
sVB601831 •FH
VB602131 •FH 34 1/2” High
sVB601834 •FH
VB602134 •FH
• Full -height doors • No shelf • Actual cabinet width is 59 1/2”,
frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Door left of center hinged left, door right of center hinged right
• 3 3/16” wide full -width support crossrail across top front of cabinet
• Traditional overlay inner doors are 12 5/8” wide and outer doors are 13 1/4” wide. Full overlay inner doors are inner doors are 14” wide and outer doors are 14 5/8”
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝ 14 / ˝ 14 / ˝ 15 / ˝
15 / ˝
s Reduce to 18” depth not available
G7Vanity Cabinets
Vanity Cabinets
Vanity Base Drawer
31 1/2” High, 18” Deep
sVBD121831 •3
sVBD151831 •3
sVBD181831 •3
sVBD211831 •3
sVBD241831 •3 34 1/2” High, 18” Deep
sVBD121834 •3
sVBD151834 •3
sVBD181834 •3
sVBD211834 •3
sVBD241834 •3
31 1/2” High, 21” Deep
VBD122131 •3
VBD152131 •3
VBD182131 •3
VBD212131 •3
VBD242131 •3 34 1/2” High, 21” Deep
VBD122134 •3
VBD152134 •3
VBD182134 •3
VBD212134 •3
VBD242134 •3
• One standard height drawer • Two deep drawers
l PE
l APC
RD9
RD12
RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
s Reduce to 18” depth not available
Vanity Base Four Drawer
34 1/2” High, 18” Deep
sVBD121834 •4
sVBD151834 •4
sVBD181834 •4
sVBD211834 •4
sVBD241834 •4 34 1/2” High, 21” Deep
VBD122134 •4
VBD152134 •4
VBD182134 •4
VBD212134 •4
VBD242134 •4
• Three standard height drawers • One deep drawer
l PE
l APC
RD9
RD12
RD15
I RD18
l CFO
18˝, 21˝
34 ½˝
s Reduce to 18” depth not available
Vanity Linen Cabinet
Specify R or L 84” High, 18” Deep
sVLC151884 R or L
sVLC181884 R or L
sVLC241884 R or L
sVLC241884 BUTT 90” High, 18” Deep
sVLC151890 R or L
sVLC181890 R or L
sVLC241890 R or L
sVLC241890 BUTT 96” High, 18” Deep
sVLC151896 R or L
sVLC181896 R or L
sVLC241896 R or L
sVLC241896 BUTT
Specify R or L 84” High, 21” Deep
VLC152184 R or L
VLC182184 R or L
VLC242184 R or L
VLC242184 BUTT 90” High, 21” Deep
VLC152190 R or L
VLC182190 R or L
VLC242190 R or L
VLC242190 BUTT 96” High, 21” Deep
VLC152196 R or L
VLC182196 R or L
VLC242196 R or L
VLC242196 BUTT
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Interior height of tall section on 84” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 96” high cabinets include toe kick platform shipped unattached for easier handling and installation
• Bottom, Tall doors are two -piece panel construction, except Flaxton which has a single raised panel
l PE
l APC
l RD9
l RD12
l RD15
I RD18
l CFO
84˝90˝96˝
18˝, 21˝
18˝, 21˝
84˝90˝96˝
VLC15-VLC24
VLC24BUTT
s Reduce to 18” depth not available
G8 Vanity Cabinets
Van
ity
Cabi
nets
48˝
8˝
25˝
48˝
8˝
25˝Painted door styles
Stained door styles
Vanity Linen Cabinet Short
Specify R or L 18” Deep
sVLC181848 R or L 21” Deep
VLC182148 R or L
• Three adjustable shelves • Accessory Roll -out Trays not available • Door is two piece construction except
for Flaxton has have a single raised center panel
• Cabinet designed to stack directly on VBD18_ cabinets or sit directly on countertop
• Not intended as a stand alone, single wall mount cabinet
Caution: Additional support is required. See installation sheet provided with cabinet
l PE
l APC
l RD9
l RD12
l RD15
I RD18
l CFO
48˝
18˝, 21˝
s Reduce to 18” depth not available
Vanity Wall Cabinet
Specify R or L
VW1530 R or L
• Three adjustable shelves • Surface mount
l PE
l APC
RD9
RD12
RD15
RD18
CFO30˝
15˝4 ¾˝
Vanity Wall Boutique
VWB2430 BUTT • One adjustable shelf • Exposed full -depth fixed shelf in lower
section • Matching color laminate interior and
shelves • 5” high frame opening in lower section • Cabinet back extends through opening in
lower section • No towel bar
l PE
l APC
RD9
RD12
RD15
RD18
CFO30”
7” 24”
Vanity Wall Boutique w/Towel Bar
VWB2648 • Two adjustable shelves • Cabinet includes, 3/4” matching side solid
wood side panels, exposed fixed shelf and matching solid wood towel bar
• 6 7/8” high opening between fixed shelf and cabinet
PE
l APC
RD9
RD12
RD15
RD18
CFO
G9Vanity Cabinets
Vanity Cabinets
Mirror Cabinet
MC1627 •PC • Polished chrome finish • Three adjustable 5/8” thick no -tilt shelves
with clear shelf supports • Door is 3/16” thick plate glass mirror with
rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer
• Cabinet can be inverted, magnetic latch must be relocated
• Hinged right • For surface mount or recess installation • Cutout required for recessed installation;
14 1/2” wide, 25 3/4” high, 3 1/2” deep • Mirror door shipped unattached for easier
handling and installation • Mounting hardware included
PE
l APC
RD9
RD12
RD15
RD18
CFO
27˝
4 ¼˝
16˝
Tri-View Mirror
TV2430 •PC
TV3030 •PC
TV3630 •PC
• Polished chrome finish • Three adjustable 5/8” thick no -tilt shelves
with clear shelf supports • Doors are 3/16” thick plate glass mirror
with rounded edges, pivot hinges, magnetic touch latch and vinyl safety backer
• Left and center doors hinged right, right door hinged left to create a three -way reflection
• Vertical divider between center and left hand door in 30” and 36” cabinet
• For surface mount or recess installation • Mirror door shipped unattached for easier
handling and installation • Mounting hardware included
PE
l APC
RD9
RD12
RD15
RD18
CFO
TV2430TV3030TV3630
22 ¾˝28 ¾˝34 ¾˝
28 ¾˝28 ¾˝28 ¾˝
3 ½˝3 ½˝3 ½˝
Cutout dimensions for recessed installation
Item Width Height Depth
30˝
4 ¼˝
G10 Vanity Accessories
Van
ity
Cabi
nets
Vanity Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
MVEP 21 31
code width height
Vanity Hamper Roll-Out
VHRO18 • White epoxy coated wire frame rolls on full -extension slides, designed for easy removal of basket
• Fits 31 1/2” high vanities with full height doors 18” and wider or 34 1/2” high vanity cabinets 18” and wider with or without a top drawer
• Mounts to cabinet floor • 60 -qt. white plastic laundry basket included • Load rating of 30 lbs • Installation instructions and mounting
hardware included • Offered as individual kit • 19 1/2” high x 15” wide x 19” deep
C
M
O
19 ½˝
19˝
15˝
Vanity Filler
VF3•31 • 3/4” thick solid wood • Toe Kick included, shipped unattached • Backside of filler not finished
v C
v M
v O
3˝
31 ½˝
¾˝
Vanity Fluted Filler
VFF3•31 • 3/4” thick solid wood • Four flutes • Backside of filler not finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
31 ½˝
3˝
¾˝/˝
G11Vanity Accessories
Vanity Cabinets
Base Filler
BF3 • 3/4” thick solid wood • Toe Kick included, shipped unattached • BF3 is used with 3 1/2” Vanity cabinets • Backside of filler not finished
v C
v M
v O
3˝
34 1/˝
¾˝
Base Fluted Filler
BFF3 • 3/4” thick solid wood • Use between cabinets or to create a column
effect. Can be combined with other moldings and panels for decorative effects
• BFF3 is used with 34 1/2” Vanity cabinets • Four flutes • Backside of filler not finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
34 ½˝
3˝
¾˝
/˝
Matching Vanity End Panel
MVEP2131
MVEP2134 • Provides a finished furniture look to
31 1/2” and 34 1/2” Vanity cabinets • Includes end panel with decorative door • For right or left hand use • 5/32” thick veneered plywood panel • Full overlay door styles shipped unattached to
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• Field installation only • Toespace notch must be field cut
v C
v M
v O
Field cutToespace
31 ½˝, 34 ½˝
20 ¼˝
/˝
Item
MVEP2131
MVEP2134
20 ¼˝
20 ¼˝
Width
31 ½˝
34 ½˝
Height
26 ¼˝
29 ¼˝
Height
20 /˝
20 /˝
Width
25˝
28˝
Height
19 ¼˝
19 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
G12 Notes
Notes
Van
ity
Cabi
nets
H1Office Cabinets
Office Cabinets
Office Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Note: Standard office cabinet box depth is 18” or 21” unless stated otherwise. Add door thickness with bumpers for total depth. Standard base desk cabinet height is 29” unless stated otherwise.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - - All Plywood Construction RD12 - - - Reduce Depth 12” RD15 - - - Reduce Depth 15” RD18 - - - Reduce Depth 18” CFO - - - - Cabinet Front Only
DKD 30 18
code width depth
Desk Door Cabinet – Single
Specify R or L
DDO15 R or L
DDO18 R or L
DDO21 R or L
DDO24 R or L
• No shelf • Standard height top drawer I Note: When depth is reduced to 12” or
15”, drawers become a false front
l PE
l APC
I RD12
I RD15
l RD18
l CFO
21˝
29˝
Desk Drawer Cabinet
DDR12
DDR15
DDR18
DDR21
DDR24
• Two standard height top drawers on top • One deep bottom drawer • 3/4 extension on drawer(s) • Designed to be used in conjunction with
Desk Knee Drawer (DKD) units
l PE
l APC
RD12
RD15
l RD18
l CFO
21˝
29˝
21˝
29˝
Letter or Legal Letter only Letter or Legal Legal only
Letter or Legal Legal onlyLetter or Legal
DFD15
DFD18
DFD21
DFD24
H2 Office Cabinets
Offi
ce C
abin
ets
Desk File Drawer Cabinet
DFD15
DFD18
DFD21
DFD24
• Standard height top drawer • 3/4 extension on top drawer • Bottom file drawer has full extension side -
mount slides and hanging folder hardware to accommodate letter or legal size folders
• Drawer front on bottom drawer is styled as a door • DFD24 cabinet uses same hanging folder hardware
as DFD21 cabinet • Designed to be used in conjunction with Desk Knee
Drawer (DKD) units
l PE
l APC
RD12
RD15
RD18
CFO
Desk Knee Drawer Cabinet
18” Deep
DKD2418
DKD3018
DKD3618 21” Deep
DKD24
DKD30
DKD36
• Designed for use between base, desk, vanity, tall cabinets or with desk leg on one end
• Full -width top panel is recessed for easier installation
• Drawer front is profiled on all edges • Drawer fronts are solid slab; except Bellwether
and Rexton • Bellwether and Rexton drawer fronts are same
construction as standard fronts; except the stiles and rails are narrower (1 1/2” wide)
• Requires countertop or writing surface
PE
l APC
RD12
RD15
RD18
l CFO
4 ½˝
24˝ 30˝ 36˝
18˝ 21˝
Desk Knee Drawer Cabinet – Trimmable
18” Deep
DKDT2418
DKDT3018
DKDT3618 21” Deep
DKDT24
DKDT30
DKDT36
• Designed for use between base, desk, vanity, tall cabinets or with desk leg on one end
• Full -width top panel is recessed for easier installation
• Drawer front is profiled on all edges • Face frame includes 11/16” tall bottom rail for
added strength • 4 1/2” wide face frame stiles permit DKDT
to be trimmed up to 6” in overall width (3” each side)
• Drawer fronts are solid slab; except Bellwether and Rexton
• Bellwether and Rexton drawer fronts are same construction as standard fronts; except the stiles and rails are narrower (1 1/2” wide)
• Requires countertop or writing surface
PE
l APC
RD12
RD15
RD18
l CFO
5 /˝
18˝ 21˝
24˝ 30˝ 36˝
H3Office Accessories
Office Cabinets
Office Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
C - - - Cherry M - - - Maple O - - - Oak
DEP 24 31
code depth height
Organizer
O24
O30
O36
• For use beneath wall cabinets or open shelves
• Matching wood veneer interior and exterior surfaces
• Use a Wall End Panel (WEP) on exposed sides to cover end panel joints between wall cabinet and organizer
v C
v M
v O
12˝6˝
24˝
6˝
6˝
12˝ 30˝
12˝ 36˝
Desk End Panel
DEP2431 • Used to support end of Desk Knee Drawer (DKD) or Desk Knee Drawer Trimmable (DKDT). Fits behind extended frame stile
• Field cut to correct height where applicable • Available in All Plywood Construction (APC)
v C
v M
v O
5 /˝
31 ½˝
23 ¼˝
¾˝
Matching Desk End Panel
MDEP • Provides a finished furniture look to Desk Drawer (DDR) and Desk File Drawer (DFD) cabinet ends
• Includes end panel with decorative door • For right or left hand use • 5/32” thick veneered plywood panel • Full overlay door styles shipped unattached to
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• Toespace notch must be field cut • Field installation only
v C
v M
v O
Field cutToespace
20 ¹/˝
29˝/˝
Item
MDEP 20 ¼˝
Width
29˝
Height
23 ¾˝
Height
20 /˝
Width
22 ½˝
Height
19 ¼˝
Width
Full OverlayDoor
PanelSize
1/2” OverlayDoor
H4 Notes
Notes
Offi
ce C
abin
ets
I1Furniture Accessories
Furniture Cabinets
Furniture Accessories
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
FEP 21 53 •CE
code depth height suffix
Furniture Component Design Idea
FSTBFTBV
FEP
VB30B30
FS/FS.HD
FSTBFTBV
FEP
FS/FS.HD
FS
W3030
FSTBFTBV
FEP.CE
Sample Component Configuration
• �ese units are not to be used free-standing.• Units must be attached to a wall for proper support.
Furniture End Panels
53 1/2” High
FEP1353
FEP2153 84” High
FEP1384
FEP2184
• 3/4” thick engineered wood • Bored one side for adjustable shelves, tops,
bottoms, hanger rails and valances • 53 1/2” Furniture Panels are for mounting on
desk cabinets or panels and can be trimmed to 48” for mounting on kitchen base cabinets
• 84” Furniture Panels are for floor mounted installation
• Front and back edges finished • Cherry, Maple, and Oak door styles have
wood veneer surfaces, except Brie, Meringue and Truffle which will have matching laminate surfaces
• Not available in All Plywood Construction (APC)
v C
v M
v O
53 ½˝ 84˝
13˝ , 21˝
I2 Furniture Accessories
Furn
itur
e Ca
bine
ts
Furniture End Panel – Center Drilled
53 1/2” High
FEP1353 •CE
FEP2153 •CE 84” High
FEP1384 •CE
FEP2184 •CE
• 3/4” thick engineered wood • Bored on both sides for adjustable shelves,
tops, bottoms, hanger rails and valances • 53 1/2” Furniture Panels are for mounting on
desk cabinets or panels and can be trimmed to 48” for mounting on kitchen base cabinets
• 84” Furniture Panels are for floor mounted installation
• Front and back edges finished • Cherry, Maple, and Oak door styles have
wood veneer surfaces, except Brie, Meringue and Truffle which will have matching laminate surfaces
• Not available in All Plywood Construction (APC)
v C
v M
v O
53 ½˝ 84˝
13˝ , 21˝
Furniture Shelves
13” Deep
FS1813
FS3013
FS3613
FS1384 21” Deep
FS1821
FS3021
FS3621
FS2184
• 3/4” thick engineered wood • Shelf load rating of 15 lbs. per square foot, not
to exceed 50 lbs. • 13” deep for books and decorative accessories • 21” deep for electronics • Front and back edges finished • Trimmed to fit installation • Shelf supports not included • Cherry, Maple, and Oak door styles have
wood veneer surfaces, except Brie, Meringue and Truffle which will have matching laminate surfaces
• Not available in All Plywood Construction (APC)
For heavy -duty applications like supporting a television use heavy duty shelves
v C
v M
v O
13˝, 21˝ 18˝, 30˝, 36˝, 84˝
Furniture Shelves – Heavy-Duty
13” Deep
FS3013 •HD
FS3613 •HD 21” Deep
FS3021 •HD
FS3621 •HD
• 3/4” thick engineered wood • Additional support is required • Reinforced and will support 30 lbs. per square
foot • 13” deep for books and decorative accessories • 21” deep for electronics • Front and back edges finished • Trimmed to fit installation • Includes four shelf supports • Cherry, Maple, and Oak door styles have
wood veneer surfaces, except Brie, Meringue and Truffle which will have matching laminate surfaces
• Not available in All Plywood Construction (APC)
v C
v M
v O
13˝21˝
30˝, 36˝
¾˝ thick
I3Furniture Accessories
Furniture Cabinets
Furniture Shelves – Top and Bottom
18” Deep
FSTB1813
FSTB3013
FSTB3613 21” Deep
FSTB1821
FSTB3021
FSTB3621
• 3/4” thick engineered wood • Includes: shelf, hanger rail (to attach to wall)
and cam lock fastener • Front and back edges finished • Cherry, Maple, and Oak door styles have
wood veneer surfaces, except Brie, Meringue and Truffle which will have matching laminate surfaces
• Not available in All Plywood Construction (APC)
Furniture Top and Bottom Shelves are required for modular shelving system
v C
v M
v O
18˝, 30˝ 36˝13˝, 21˝
Furniture Toeboard Valance
FTBV18
FTBV30
FTBV36
• Attaches between uprights on the underside of Furniture Shelves Top and Bottom (FSTB) for decorative effect and to stabilize units
• Cherry, Maple and Oak are 3/4” solid wood and have a traditional furniture shape on bottom
• Brie, Meringue and Truffle are 3/4” engineered wood with matching laminate surfaces and straight bottom edge
• Not available in All Plywood Construction (APC)
v C
v M
v O
18˝ 30˝ 36˝4 ¼˝
I4 Notes
Notes
Furn
itur
e Ca
bine
ts
J1Universal Cabinets
Universal Cabinets
Universal Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
We manufacture cabinets that are readily used in floor plans that meet current ADA Accessibility Guidelines for Building and Facilities (ADAAG) guidelines. The primary responsibility to make a space comply with these guidelines is on the architect or space planner. Our products can be used to help satisfy the storage needs and accessibility requirements of disabled persons but depends on the knowledge, skill and creativity of the design professional and proper installation of these products. ADA Accessibility Guidelines for buildings and facilities can be visited online at: www.access -board.gov/.
All double door cabinets will have butt doors unless stated otherwise. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
PE - - - - - - - Plywood Ends APC - - - - - - All Plywood Construction RD12 - - - - - Reduce Depth 12” RD15 - - - - - Reduce Depth 15” RD18 - - - - - Reduce Depth 18” RD21 - - - - - Reduce Depth 21” 1ROT - - - - - 1 Roll -out Tray 2ROT - - - - - 2 Roll -out Trays 4ROT - - - - - 4 Roll -out Trays 1FWROT - - 1 Full Width Tray 2FWROT - - 2 Full Width Trays 2DROT - - - 2 Deep Roll -out Trays 4DROT - - - 4 Deep Roll -out Trays 2DFWROT 2 Deep Full Width Roll -out Trays CFO - - - - - - Cabinet Front Only
UB 12 R •FH
code width hinge suffix
Universal Base Single Door
Specify R or L
UB12 R or L
UB15 R or L
UB18 R or L
UB21 R or L
UB24 R or L
• One standard drawer I When depth is reduced to 12” drawer
becomes a false front I Deep Roll -out Trays (DROT) or Deep Full -
width Roll -out Trays (DFWROT) are not available with reduced depth options
I Roll -out Trays (ROT) cannot be included when a Reduced Depth (RD) option of less than 18” is selected
l PE
l APC
I RD12
I RD15
l RD18
l RD21
I 1ROT
I 2ROT
4ROT
1FWROT
2FWROT
I 2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
Universal Base Double Door
One Drawer
n UB24 BUTT
n UB27 (Butt)
n UB30 BUTT
n UB33 BUTT
n UB36 BUTT Two Drawers
u UB42
• When depth is reduced to 12” drawer becomes a false front
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
I Roll -out Trays (ROT) cannot be included when a Reduced Depth (RD) option of less than 18” is selected
I Note: When depth is reduced to 12” or 15”, drawers become a false drawer front
l PE
l APC
I RD12
I RD15
l RD18
l RD21
1ROT
I 2ROT
I 4ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
I 2DFWROT
l CFO
UB24 BUTT-UB36 BUTT
32 ½˝
24˝
32 ½˝
24˝ UB42
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
J2 Universal Cabinets
Uni
vers
al C
abin
ets
Universal Base Single Door w/Two Full-Width Trays
Specify R or L
UB12 R or L•2FWT
UB15 R or L•2FWT
UB18 R or L•2FWT
UB21 R or L•2FWT
UB24 R or L•2FWT
• One standard drawer • Two standard Full -width Roll -out Trays
(FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Single Door w/Two Deep Full-Width Trays
Specify R or L
UB12 R or L•2DFWT
UB15 R or L•2DFWT
UB18 R or L•2DFWT
UB21 R or L•2DFWT
UB24 R or L•2DFWT
• One standard drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Two Full-Width Trays
UB24 BUTT•2FWT
UB27 (Butt)•2FWT
UB30 BUTT•2FWT
UB33 BUTT•2FWT
UB36 BUTT•2FWT
• One standard drawer • Two standard Full -width Roll -out Trays
(FWROT)
Remember, when designing a space for storing heavy items, avoid using 30–36” wide Roll -Out
Trays (ROT). These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Two Deep Full-Width Trays
UB24 BUTT•2DFWT
UB27 (Butt)•2DFWT
UB30 BUTT•2DFWT
UB33 BUTT•2DFWT
UB36 BUTT•2DFWT
• One standard drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
J3Universal Cabinets
Universal Cabinets
Universal Base Double Door w/Four Trays
UB42 •4T • Two standard drawers • Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Four Deep Trays
UB42 •4DT • Two standard drawers • Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Pull-out Table
UBT24 BUTT • Top drawer is replaced with full -width 20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullout top has hardwood telescoping slides
• Pull -out table extends 30” from front of cabinet on telescoping hardwood slides
• Drawer front must be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
l 1FWROT
l 2FWROT
2DROT
4DROT
l 2DFWROT
CFO
32 ½˝
24˝
Universal Base Pull-Out Table w/Two Full-Width Trays
UBT24 BUTT•2FWT • Top drawer is replaced with full -width 20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullout top has hardwood telescoping slides
• Pull -out table extends 30” from front of cabinet on telescoping hardwood slides
• Drawer front must be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
• Two adjustable, Full -width Roll -out Trays (FWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
J4 Universal Cabinets
Uni
vers
al C
abin
ets
Universal Base Pull-Out Table w/Two Deep Full-Width Trays
UBT24 BUTT•2DFWT • Top drawer is replaced with full -width 20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullout top has hardwood telescoping slides
• Pull -out table extends 30” from front of cabinet on telescoping hardwood slides
• Drawer front must be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
• Two Deep Full -width Roll -out Trays (DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Single Door
Specify R or L
I UB9 R or L•FH
UB12 R or L•FH
UB15 R or L•FH
UB18 R or L•FH
UB24 R or L•FH
• Full -height door • One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
4ROT
1FWROT
2FWROT
I 2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
I Roll -out Trays (ROT) are not available
Universal Base Full-Height Single Door w/Two Full-Width Trays
Specify R or L
UB12 R or L•FH•2FWT
UB15 R or L•FH•2FWT
UB18 R or L•FH•2FWT
UB24 R or L•FH•2FWT
• Full -height door • Two standard Full -width Roll -out Trays
(FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Single Door w/Two Deep Full-Width Trays
Specify R or L
UB12 R or L•FH•2DFWT
UB15 R or L•FH•2DFWT
UB18 R or L•FH•2DFWT
UB24 R or L•FH•2DFWT
• Full -height door • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
J5Universal Cabinets
Universal Cabinets
Universal Base Full-Height Double Door
n UB24 BUTT•FH
n UB27 (Butt)•FH
n UB30 BUTT•FH
n UB33 BUTT•FH
n UB36 BUTT•FH
u UB39 •FH
u UB42 •FH
u UB45 •FH
u UB48 •FH
• Full -height doors I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are only available in cabinets 24” deep
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
I 4ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
I 2DFWROT
l CFO
32 ½˝
24˝ n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Universal Base Full-Height Double Door w/Two Full-Width Trays
UB24 BUTT•FH•2FWT
UB27 (Butt)•FH•2FWT
UB30 BUTT•FH•2FWT
UB33 BUTT•FH•2FWT
UB36 BUTT•FH•2FWT
• Full -height doors • Two standard Full -width Roll -out Trays
(FWROT)
Remember, when designing a space for storing heavy items, avoid using 30–36” wide Roll -Out
Trays (ROT). These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Double Door w/Two Deep Full-Width Trays
UB24 BUTT•FH•2DFWT
UB27 (Butt)•FH•2DFWT
UB30 BUTT•FH•2DFWT
UB33 BUTT•FH•2DFWT
UB36 BUTT•FH•2DFWT
• Full -height doors • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Double Door w/Four Trays
UB39 •FH•4T
UB42 •FH•4T
UB45 •FH•4T
UB48 •FH•4T
• Full -height doors • Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
J6 Universal Cabinets
Uni
vers
al C
abin
ets
Universal Base Full-Height Double Door w/Four Deep Trays
UB39 •FH•4DT
UB42 •FH•4DT
UB45 •FH•4DT
UB48 •FH•4DT
• Full -height doors • Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Three Drawer
UBD12 •3
UBD15 •3
UBD18 •3
UBD21 •3
UBD24 •3
• Standard height top drawer • Bottom drawers are deep
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
Universal Lazy Susan
Specify R or L
ULS36 R or L
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Shelf height cannot be adjusted • Two piece bi -fold door with independent
adjustment • 168° opening hinges on face frame door • Full Overlay door style face frame stiles
are notched to accept door hinges. Door hinging cannot be inverted in field
• Note: Back barrel will not be plywood when APC is ordered
PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
l CFO
32 ½˝
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
Universal Sink Front Doors
UBSF36 BUTT•FH • Full -height door • Includes front frame and appropriate
doors only • Not trimmable • No toe kick • Bottom panel not supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
27˝
36˝
J7Universal Cabinets
Universal Cabinets
Universal Sink Front Kit
USFCK30 BUTT•FH
USFCK33 BUTT•FH
USFCK36 BUTT•FH
USFCK42 •FH
• Full -height door • Toe Kick Backer assembly shipped
unassembled to floor • Includes floor • 3/8” thick engineered wood bottom panel
with easy clean laminate on one side; back side unfinished
• 1/2” thick engineered wood toeboard
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Removable Sink Front
URSF30 BUTT
URSF33 BUTT
URSF36 BUTT
URSF42
• Designed for easy field conversion from a standard sink base functionality to universal access open space
• Permanently installed countertop support rail is 3 -1/2” high x 3/4” thick solid wood
• Doors and frame are shipped pre -assembled
• 3/4” thick removable plywood bottom panel with support hardware / leveling legs and a removable clipped -on toe kick provided
• Matching solid wood baseboard provided for bottom panel support along the kitchen wall
• Frame attached to bottom panel using quick connect (cam -locks) fasteners providing a solid tight joint
• Some field assembly required; instructions and hardware included
• A Universal Access Panel (UAP) can be purchased separately to conceal/protect the water and drain lines. See “Panels” section. Please specify specie and finish
IRegardless of construction option, sink front is constructed and shipped the same
Complete flooring under Universal Access Removable Sink Front to prepare for the future when sink
front and plywood bottom is removed.
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Toe Kick
Laminate
UMTK8
UMTK8 •4 Veneer
UWMTK8
UWMTK8 •4
• Laminate, 5 7/16” high x 96” long x 3/16” thick MDF (Medium Density Fiberboard)
• Veneer, 5 7/16” high x 96” long x 5/32” thick vennered plywood
• Matching easy clean laminate on one side • Grain direction runs lengthwise (when
applicable)
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
96˝
5 /˝
J8 Notes
Notes
Uni
vers
al C
abin
ets
K1Paneling
Panels-Shelving-Trays
Paneling Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
WSK 96 48
code width height
Wood Veneer Paneling
WSK1230 11 1/4” x 30” x 5/32”
WSK1530 14 1/4” x 30” x 5/32”
WSK2434 23 1/4” x 34 1/2” x 5/32”
WSK4834 48 x 34 1/2” x 5/32”
WSK1242 11 1/4” x 42” x 5/32”
WSK1542 14 1/4” x 42” x 5/32”
u WSK9648 96” x 48” x 5/32”
WSK2484 23 1/4” x 84” x 5/32”
WSK2496 23 1/4” x 96” x 5/32”
WSK4896 48” x 96” x 5/32”
WSK24108 108”x23 1/4”x 5/32” u Not available in painted finishes
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Veneered plywood panel finished on one side
v C
v M
v O
StandardGrain Panel
CrossGrain Panel
Woodgrain Laminate Paneling
I VSK4834 48” x 34 1/2” x 5/32”
VSK4896 48” x 96” x 3/16”
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Medium Density Fiberboard (MDF) panel with easy clean laminate on front side and unfinished backside
I C
v M
I O
I Only available in Maple
K2 Paneling
Pane
ls-S
helv
ing-
Tray
s
Beaded Paneling
BEPL4834 48” x 34 1/2” x 3/16”
BEPL4896 48” x 96” x 3/16”
• Can be used as wainscoting or to cover exposed backs of base and tall cabinets in peninsula and island configurations
• 3/16” thick veneered plywood panel • Finished one side only
v C
v M
v O
Grain Direction
48˝
34 ½˝or
96˝
/˝
CoreGuard® Panel Backer
CGPB36 • Light beige engineered polymer • Used to patch backs of CoreGuard® cabinets
C
M
O
34 /˝
26 /˝
/˝
K3Shelving
Panels-Shelving-Trays
Shelving Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
SK 18 12
code width depth
Shelf Kits
Engineered Wood
Utility Shelf Kit
12” Deep Cabinets
I SK1512
I SK1812
I SK2412 Vanity Linen Shelf Kit
21” Deep
I SK1521
I SK1821
I SK2421 Utility Shelf Kit
24” Deep
I SK1524
I SK1824
I SK2424
Plywood Utility Shelf Kit
12” Deep
SK3012
SK3612 Utility Shelf Kit
24” Deep
SK3024
SK3624
• 3/4” shelves laminated on both sides • Matching edgebandings applied on the front
edge • Kit includes: five shelves, 20 clear supports, 30”
and 36” wide shelf kits also include five clear back supports
C
M
O
I Available in All Plywood Construction (APC)
K4 Shelving
Pane
ls-S
helv
ing-
Tray
s
Replacement Shelving–Walls
12” Deep Wall Shelf
WS0912
WS1212
WS1512
WS1812
WS2112
WS2412
WS2712
WS3012
WS3312
WS3612
WS3912
WS4212
WS4512
WS4812 Wall Angle Shelf
WAS2424
WAS2727 Wall Corner Angle
Shelf
WCAS1212
Wall End Corner Shelf
WECS1212 Wall Easy Reach
Shelf
WEZR2424
15” Deep Wall Shelf
WS0915
WS1215
WS1515
WS1815
WS2115
WS2415
WS2715
WS3015
WS3315
WS3615
WS3915
WS4215
WS4515
WS4815 Wall Microwave
Shelf Cabinet Shelf
WMSCS2418
WMSCS2718 Wall Microwave
Shelf
WMSSS2715
WMSSS3015
WMSSS2718
WMSSS3018
24” Deep Wall Shelf
WS0924
WS1224
WS1524
WS1824
WS2124
WS2424
WS2724
WS3024
WS3324
WS3624
WS3924
WS4224
WS4524
WS4824 Peninsula Wall
Shelf
PWS1812
PWS2112
PWS2412
PWS3012
PWS3612 Peninsula Wall Angle
Shelf
PWAS2424
• 3/4” shelves laminated on both sides
• Size fits interior of cabinet listed • Includes one shelf
C
M
O
Replacement Shelving–Base
12” Deep Base Shelf
BS1212
BS1512
BS1812
BS2112
BS2412
BS2712
BS3012 Peninsula Base Shelf
PBS1824
PBS2424
PBS2724
PBS3024
PBS3624
24” Deep Base Shelf
BS1224
BS1524
BS1824
BS2124
BS2424
BS2724
BS3024
BS3324
BS3624
BS3924
BS4224
BS4524
BS4824
BS5424
Base Corner Fixed Shelf
BS3636 •BCFS
Base End Angle
BS1224 •BEA
Base Corner Angle Shelf
BS2424 •BCA
Base Combination Drawer Shelf
BS2424 •BCD
Base End Corner Shelf
BS2424 •BEC Base Corner
Diagonal Shelf
BS3024 •BCD
BS3624 •BCD
• 3/4” shelves laminated on both sides
• Size fits interior of cabinet listed • Includes one shelf
C
M
O
K5Shelving
Panels-Shelving-Trays
Replacement Shelving–Tall
12” Deep Tall
TS1512
TS1812
TS2412
TS3012
TS3612 21” Deep Tall
TS1521
TS1821
TS2421 24” Deep Tall
TS1524
TS1824
TS2424
TS2724
TS3024
TS3324
TS3624
• 3/4” shelves laminated on both sides • Size fits interior of cabinet listed • Includes one shelf
C
M
O
Replacement Shelving–Vanity
Vanity Shelf
VS1821 Vanity Wall Shelf
VS1505 •VW Vanity Mirror Shelf
VS1627 •MC Vanity Tri-View Mirror Cabinet Shelf
VS24/3630 •TVMC
VS3030 •TVMC•L
VS3030 •TVMC•R Vanity Wall Boutique Shelf
VS2407•VWB
• 3/4” shelves laminated on both sides • Size fits interior of cabinet listed • Includes one shelf
C
M
O
K6 Roll-out Trays
Pane
ls-S
helv
ing-
Tray
s
Roll-out Trays Construction Options and Modifications
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
ROT 15 •24
code width depth
Roll-out Trays - Field Installation
18” Deep TraysROT12 •18ROT15 •18ROT18 •18ROT24 •18ROT27 •18ROT30 •18ROT33 •18ROT36 •18
21” Deep Trays ROT12 •21ROT15 •21ROT18 •21ROT21 •21ROT24 •21ROT27 •21ROT30 •21ROT33 •21ROT36 •21
24” Deep TraysROT9 •24ROT12 •24ROT14 •24ROT15 •24ROT16 •24ROT18 •24ROT19 •24ROT21 •24ROT22 •24ROT24 •24ROT27 •24ROT30 •24ROT33 •24ROT36 •24
• Installs in base, vanity, and and utility cabinets only using pre -drilled holes in back panel
• 18”, 21” and 24” depths only • Mounting hardware and runners included • Natural finish • Example: For BBC39—order ROT9•24 For B12—order ROT12•24 For B18•FH—order ROT18•24 For U302496 BUTT—order ROT30•24
Determine the location of plumbing and other obstructions before ordering tray kits
Roll-out Trays Double Faced - Field Installation
Width
ROT18 •24•DF 14 3/4”
ROT21 •24•DF 17 3/4”
ROT24 •24•DF 20 3/4”
ROT27 •24•DF 23 3/4”
ROT30 •24•DF 26 3/4”
• Installs in Peninsula Base (PB) cabinets only using pre -drilled holes in face frames
• Tray front and back are made of solid hardwood; tray sides and bottom panel are made of engineered wood covered with a moistureand stain -resistant, easy clean laminate. Top edge of sides finished with matching edge banding
• Mounting hardware and runners included • 3/4 extension runners • Natural finish • Example: For PB21—order ROT21•24•DF For PB24 BUTT—order ROT24•24•DF For PB30 BUTT—order ROT30•24•DF
K7Roll-out Trays
Panels-Shelving-Trays
Roll-out Trays Solid Wood - Field Installation
18” Deep Trays
ROTW15 •18
ROTW18 •18
ROTW27 •18
ROTW30 •18
21” Deep Trays
ROTW12 •21
ROTW15 •21
ROTW18 •21
ROTW21 •21
ROTW27 •21
ROTW30 •21
ROTW33 •21
ROTW36 •21
24” Deep Trays
ROTW12 •24
ROTW15 •24
ROTW16 •24
ROTW18 •24
ROTW19 •24
ROTW21 •24
ROTW22 •24
ROTW24 •24
ROTW27 •24
ROTW30 •24
ROTW33 •24
ROTW36 •24
• Installs in base and vanity cabinets utilizing pre -drilled holes in the back panel and some face frames
• .205” thick plywood bottom panel finished on the top side with a moisture and stain resistant, easy clean laminate with printed matching wood grain
• Solid hardwood tray core with 3/4” thick front and 1/2” thick sides and back
• Mounting hardware and runners included • Determine location of plumbing before ordering
tray(s) • 3/4 extension runners • Natural finish • Example: For VB152131—order ROTW15•21 For VLC181884—order ROTW18•18 For B27 (Butt)—order ROTW27•24
Deep Roll-out Trays - Field Installation
DROT12 •24
DROT14 •24
DROT15 •24
DROT16 •24
DROT18 •24
DROT19 •24
DROT21 •24
DROT22 •24
DROT24 •24
DROT27 •24
DROT30 •24
DROT33 •24
DROT36 •24
• Installs in base, vanity, and and utility cabinets only using pre -drilled holes in back panel
• 24” depth only • Trays are made of 1/2” thick solid hardwood;
bottoms are .205” thick matching wood grain printed plywood
• Mounting hardware and runners included • Natural finish • 3/4 extension runners • Example: For B12•FH—order DROT12•24 For PB21—order DROT21•24 For BBC42—order DROT14•24
Deep Roll-out Trays – Full Extension Field Installation
Width
DROTFX30 •24 25 13/16”
DROTFX33 •24 28 13/16”
DROTFX36 •24 31 13/16”
• Installs in base cabinets with butt doors using pre -drilled holes in back panel and most face frames; rear mounting brackets included for installing in peninsula base cabinets
• 24˝ depth only • Trays are made of 1/2” thick solid hardwood;
bottoms are .205” thick matching wood grain printed plywood
• 3 3/16” interior height along sides • 1 15/16” deep finger pull at midpoint of tray
front • Unit slides on full extension side -mount ball
bearing runners • Mounting hardware and runners included • Natural finish • Example: For SB30 BUTT•W—order DROTFX30•24 For B33 BUTT—order DROTFX33•24 For UB36 BUTT—order DROTFX36•24
K8 Roll-Out Tray Charts
Pane
ls-S
helv
ing-
Tray
s
Roll-out Trays - Field Installation
ROTW22 •24 19 1/4" B45, B45•FH, BBC51, UB45•FH
Item (by depth) Tray Width For Use In: 18” depth
21” depth
24” depth
ROTW15 •18 11 3/4" VB151831, VB151834, VB481831•FH, VB481834•FH, VCD301831 DL2/DR2, VCD301834 DL3/DR3, VSB481831•2, VSB481834•2, VSB601831•2, VSB601834•2
ROTW18 •18 14 3/4" VB181831, VB181831•FH, VB181834, VB181834•FH, VB541831•FH, VB541834•FH, VCD361831 DL2/DR2, VCD361834 DL3/DR3, VCD421834•8, VCD481834•8, VSB361831•2, VSB361834•2, VSB541831•2, VSB541834•2VSB481834•2, VSB601831•2, VSB601834•2
ROTW27 •18 23 3/4" VB271831•FH, VB271834•FH, VSB271831, VSB271834
ROTW30 •18 26 3/4" VB301831 BUTT•FH, VB301834 BUTT•FH, VSB301831 BUTT, VSB301834BUTT
ROTW12 •21 8 3/4" VB122131, VB122134, VCD242131 DL/R2, VCD242134 DL/R3, VSB422131•2, VSB422134•2
ROTW15 •21 11 3/4" VB152131, VB152134, VB482131•FH, VB482134•FH, VB602131•FH, VB602134•FH, VCD302131 DL/R2, VCD302134 DL/R3, VLC152184, VLC152190, VLC152196, VSB482131•2, VSB482134•2, VSB602131•2, VSB602134•2
ROTW18 •21 14 3/4" VB182131, VB182131•FH, VB182134, VB182134•FH, VB542131•FH, VB542134•FH, VCD362131 DL/R2, VCD362134 DL/R3, VCD422134•8, VCD482134•8, VLC182184, VLC182190, VLC182196, VSB362131•2, VSB362134•2, VSB422131•2, VSB422134•2, VSB482131•2, VSB482134•2, VSB542131•2, VSB542134•2
ROTW21 •21 17 3/4" VB212131, VB212131•FH, VB212134, VB212134•FH, VB422131•FH, VB422134•FH, VSB422131, VSB422134
ROTW27 •21 23 3/4" VB272131•FH, VB272134•FH, VSB272131 BUTT, VSB272134
ROTW30 •21 26 3/4" VB302131 BUTT•FH, VB302134 BUTT•FH, VSB302131 BUTT, VSB302134 BUTT
ROTW33 •21 29 3/4" VB332131 BUTT•FH, VB332134 BUTT•FH, VSB332131 BUTT, VSB332134 BUTT
ROTW36 •21 32 3/4" VB362131 BUTT,•FH, VB362134 BUTT•FH, VSB362131 BUTT, VSB362134 BUTT
ROTW12 •24 8 3/4" B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FH
ROTW15 •24 11 3/4" B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FH
ROTW16 •24 13 1/4" BBC45, DSB33
ROTW18 •24 14 3/4" B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FH
ROTW19 •24 16 1/4" B39, B39•FH, BBC48, SB39, SB39•FH, UB39•FH
ROTW21 •24 17 3/4" B21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FH
ROTW24 •24 20 3/4" B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTT
ROTW27 •24 23 3/4" B27, B27•FH, SB27, SB27•FH, UB27, UB27•FH
ROTW30 •24 26 3/4" B30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FH
ROTW33 •24
ROTW36 •24
29 3/4"
32 3/4"
B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FH
B36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
Roll-out Trays Double Faced - Field Installation
ROT24 •24•DF 20 3/4" PB24, PB24 BUTT
Item Tray Width For Use In:
PB18ROT18 •24•DF 14 3/4"
ROT21 •24•DF 17 3/4" PB21
ROT27 •24•DF
ROT30 •24•DF
23 3/4"
26 3/4"
PB27
PB30 BUTT
K9Roll-Out Tray Charts
Panels-Shelving-Trays
Roll-out Trays Solid Wood - Field Installation
Item (by depth) Tray Width For Use In: 18” depth
21” depth
24” depth
ROT12 •18 8 3/4” VB121831, VB121834, VCD241831 DL2/DR2, VCD241834 DL3/DR3, VSB421831•2, VSB421834•2ROT15 •18 11 3/4" VB151831, VB151834, VB481831•FH, VB481834•FH, VCD301831 DL2/DR2, VCD301834 DL3/DR3, VSB481831•2, VSB481834•2, VSB601831•2, VSB601834•2ROT18 •18 14 3/4" VB181831, VB181831•FH, VB181834, VB181834•FH, VB541831•FH, VB541834•FH, VCD361831 DL2/DR2, VCD361834 DL3/DR3, VCD421834•8, VCD481834•8, VSB361831•2, VSB361834•2, VSB541831•2, VSB541834•2ROT24 •18 20 3/4" VB241831, VB241831 BUTT, VB241831 BUTT•FH, VB241831•FH, VB241834, VB241834 BUTT, VB241834BUTT•FH, VB241834•FH, VSB241831 BUTT, VSB241834 BUTTROT27 •1823 3/4" VB271831•FH, VB271834•FH, VSB271831, VSB271834ROT27 •18 23 3/4" VB271831•FH, VB271834•FHROT30 •18 26 3/4" VB301831 BUTT•FH, VB301834 BUTT•FH, VSB301831 BUTT, VSB301834 BUTTROT33 •18 29 3/4" VB331831 BUTT•FH, VB331834 BUTT•FH, VSB331831 BUTT, VSB331834 BUTTROT36 •18 32 3/4" VB361831 BUTT•FH, VB361834 BUTT•FH, VSB361831 BUTT, VSB361834
ROT12 •21 8 3/4" VB122131, VB122134, VCD242131 DL/R2, VCD242134 DL/R3, VSB422131•2, VSB422134•2ROT15 •21 11 3/4" VB152131, VB152134, VB482131•FH, VB482134•FH, VB602131•FH, VB602134•FH, VCD302131 DL/R2, VCD302134 DL/R3, VLC152184, VLC152190, VLC152196, VSB482131•2, VSB482134•2, VSB602131•2, VSB602134•2ROT18 •21 14 3/4" VB182131, VB182131•FH, VB182134, VB182134•FH, VB542131•FH, VB542134•FH, VCD362131 DL/R2, VCD362134 DL/R3, VCD422134•8, VCD482134•8, VLC182184, VLC182190, VLC182196, VSB362131•2, VSB362134•2, VSB422131•2, VSB422134•2, VSB482131•2, VSB482134•2, VSB542131•2, VSB542134•2ROT21 •21 17 3/4" VB212131, VB212131•FH, VB212134, VB212134•FH, VB422131•FH, VB422134•FH, VSB422131, VSB422134ROT24 •21 20 3/4" VB241831, VB241834, VB241831BUTT, VB242131BUTT•FH, VB241834BUTT, VB242134BUTT•FH, VB241831•FH, VB242134•FH, VLC241884, VLC241884BUTT, VLC241890, VLC241890BUTT, VLC241896, VLC241896BUTT, VSB241831BUTT, VSB241834BUTTROT27 •21 23 3/4" VB272131•FH, VB272134•FH, VSB272131 BUTT, VSB272134ROT30 •21 26 3/4" VB302131 BUTT•FH, VB302134 BUTT•FH, VSB302131 BUTT, VSB302134 BUTTROT33 •21 29 3/4" VB332131 BUTT•FH, VB332134 BUTT•FH, VSB332131 BUTT, VSB332134 BUTTROT36 •21 32 3/4" VB362131 BUTT,•FH, VB362134 BUTT•FH, VSB362131 BUTT, VSB362134 BUTT
ROT9 •24 7 1/4" BBC39ROT12 •24 8 3/4" B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FHROT14 •24 10 1/4" BBC42ROT15 •24 11 3/4" B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FHROT16 •24 13 1/4" BBC45, DSB33ROT18 •24 14 3/4" B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FHROT19 •24 16 1/4" B39, B39•FH, BBC48, SB39, SB39•FH, UB39•FHROT21 •24 17 3/4" B21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FHROT22 •24 19 1/4" B45, B45•FH, BBC51, UB45•FHROT24 •24 20 3/4" B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTTROT27 •24 23 3/4" B27, B27•FH, SB27, SB27•FH, UB27, UB27•FHROT30 •24 26 3/4" B30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FHROT33 •24 29 3/4" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHROT36 •24 32 3/4" B36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
K10 Roll-Out Tray Charts
Pane
ls-S
helv
ing-
Tray
s
Deep Roll-out Trays - Field Installation
Item Tray Width For Use In:
DROT12 •24
DROT14 •24DROT15 •24
DROT16 •24
DROT18 •24DROT19 •24DROT21 •24
DROT22 •24DROT24 •24
DROT27 •24DROT30 •24
DROT33 •24DROT36 •24
8" 9 1/2"
11"
12 1/2"14"
15 1/2"17"
18 1/2"20"
23"
26"
29"32"
B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FH
BBC42B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FHBBC45, DSB33
B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FHB39, B39•FH, BBC48, SB39, SB39•FH, UB39•FHB21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FHB45, B45•FH, BBC51, UB45•FH
B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTTB27, B27•FH, SB27, SB27•FH, UB27, UB27•FHB30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FH
B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHB36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
Deep Roll-out Trays - Full Extension Field Installation
Item Tray Width For Use In:
DROTFX30 •24 25 13/16" B30 BUTT, B30 BUTT•FH, PB30 BUTT, SB30 BUTT, SB30 BUTT•FH, UB30 BUTT, UB30 BUTT•FHDROTFX33 •24 28 13/16" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHDROTFX36 •24 31 13/16" B36 BUTT, B36 BUTT•FH, PB36 BUTT, SB36 BUTT, SB36 BUTT•FH, UB36 BUTT, UB36 BUTT•FH
L1Supports and Valances
Decorative Enhancem
ents
Supports and Valances
Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
C - - - Cherry M - - - Maple O - - - Oak
V 36 08
code width height
Countertop Support
CTS • For use when extra support for shelves or overhanging countertop is required
• Solid wood • Vertical wood grain • Includes 2 recessed metal keyhole brackets
installed on backside • Mounting hardware included • Available in all finishes • Sold in pairs
v C
v M
v O9"
9"
1"
Valance Raised Panel
V30 RP
V36 RP
V42 RP
V48 RP
• For use between wall cabinets over windows as a panel to conceal light fixtures
• Solid wood raised center panels with cove profile
• 3/4” thick solid wood stiles and rails • Finished on both sides • Can be trimmed in field 2” each end • Available in all finishes
v C
v M
v O
10˝
2 ½˝2 ¾˝
Valance Shaker 5 1/2” High
V18 SH
V24 SH
V30 SH
V36 SH
V42 SH
V48 SH
V60 SH
V72 SH
V84 SH
8” High
V1808 SH
V2408 SH
V3008 SH
V3608 SH
V4208 SH
V4808 SH
V6008 SH
V7208 SH
V8408 SH
• For use between wall cabinets over windows as a panel to conceal light fixtures
• 3/4” thick solid wood • Backside not intended to be viewed • Finished on both sides • No decorative profile along either long edge • Can be trimmed in field 1 1/2” each end • Available in all finishes
v C
v M
v O
5 ½˝8˝
1 ½˝
3 /˝
3˝5 ½
Valance Traditional
V48 T
V72 T
V96 T
• For use between wall cabinets over windows as a panel to conceal light fixtures
• Solid wood • Front and back sides are finished • Profiled edge • Backside not intended to be viewed • Available in all finishes • Note: White has no profiled edges for a more
contemporary look. Not shown
v C
v M
v O
48˝ 72˝ 96˝
4 ¼˝
90°
¾˝
L2 Moldings
Dec
orat
ive
Enha
ncem
ents
Moldings Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
C - - - Cherry M - - - Maple O - - - Oak
ACM 8 •UF
code length suffix
(Shown field cut abase to fit agains
Molding Stack Information
To add Molding Stacks in your 2020 Design, locate them in the Drag ‘N Drop list under: Moldings>Top Moldings>Pre-Stacked Moldings. To view the PDFs, right-click on a specific stack and go to specs.
Installation Tips: • Cover countertops and work area to ensure a clean, free from damage work situation.
• Use a nail gun with a 23 gauge pin for trim. Standard is typically 18 gauge, however the 23 gauge micro pin makes smallest holes to minimize fi ll work.
• Expect to lose up to 4”- 6 ½” per cut, so plan extra molding accordingly. Always order one or two extra pieces of molding to make up the cut loss which could be up to 3” per cut to ensure the moldings are at the job site for a timely installation. Ordering additional molding after the fact to complete the job means the molding is not pulled as a group or run at the same time of color application.
• Consider staining cut edges before installing them together. � is added step will visually conceal the installation joinery, especially if wall situation and molding cuts are not precise. Painted molding installation would be virtually the same recommendation as for stain.
• When starting with your molding setting, start from either side, pull from the wall and determine overhang to wall cabinetry and door overlay type. Setting a consistent pattern, such as right to left, or left to right provides a consistent plan. Apply this same strategy with the starter molding if this is a functional piece.
• We recommend using a starter molding, but wood blocking can assist installation. Any scrap can be used as blocking.
• Side return moldings: Decorative end panels should have same overhang as the front; Flush end panels, should have approximately ¼” overhang; Under cabinet moldings should also meet door profi le.
• You can shoot an 18 gauge pin from ½” to 2” in depth to shoot from the top if you don’t have room between the ceiling and the face frame. Drilling and screwing through the bottom of the upper top rail into the molding in a secure fashion. Glue all miters when accessible.
• Use your touch up kit crayon to fi ll all miters and pin holes during installation. Wipe away excess with a soft cotton white rag to ensure a successful blend. � e touch-up marker can be used to touch up any scratches and to help blend the crayon color.
• Using construction adhesive when appropriate to secure the crown to the starter strip.
Supplies for installation
• Miter saw and sharp blade • Screw gun, drill and bits • 23 and 18 gauge pins and pinners • Air compressor and hoses • Laser or level • Touch up kit and materials • White soft rag • Wood glue • Clamps • Hammer, nail set or spring loaded nail set • Tape measure • 4 ft. and 6 ft. ladder • #2 pencil, white pencil and sharpener • Cover for work area
L3Moldings
Decorative Enhancem
ents
Angle Crown Molding
Finished
ACM8 Unfinished
ACM8 •UF
• Solid wood • Allow sufficient space between top of cabinet
and soffit or ceiling to accommodate molding • Installs directly to top of cabinet • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
¾˝
3 /˝ 1 /˝
/˝
2 /˝ 33°
Classic Crown Molding
CCM8
CCM •SW10
• Solid wood • Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Backs not finished • Includes recess for the application of Dentil
Molding (DM8), Single Bead Round Edge (SBRE8), Rope Molding (RM8), Windmere Rope Molding (WRM8), or Tapestry Insert Molding (TIM8)
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ and 10’ lengths
v C
v M
v O
2 /˝
2 /˝
Contemporary Crown Molding
CTC8
CTC •SW10 • Solid wood • Allow sufficient space between top of cabinet
and soffit or ceiling to accommodate molding • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ and 10’ lengths
v C
v M
v O2 /˝
2 /˝
Crown Molding
CM8
CM •SW10 • Solid wood • Allow sufficient space between top of cabinet
and soffit or ceiling to accommodate molding • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ and 10’ lengths
v C
v M
v O
1 ½˝
2 ¼˝
Soffit Crown Molding
SCM8
SCM •SW10 • Solid wood • Allow sufficient space between top of cabinet
and soffit or ceiling to accommodate molding • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ and 10’ lengths
v C
v M
v O1 /˝
1 /˝
L4 Moldings
Dec
orat
ive
Enha
ncem
ents
Small Starter Molding
STR8 • Solid wood • Used at top of wall and tall cabinets to allow
attachment of crown molding or as a filler between cabinet and ceiling/soffit
• Shipped in one piece • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
¾˝
3˝
3˝
/˝ Radius
/˝ Radius
Large Starter Molding
LSTR8 • Solid wood • Used at top of wall and tall cabinets to allow
attachment of crown molding or as a filler between cabinet and ceiling/soffit
• Shipped in one piece • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
¾˝
3˝
6˝
/˝ Radius/˝ Radius
Angled Outside Corner Molding
AOSC8 • Solid wood • Used to cover joint when two panels meet at
135° • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
135°
¾˝ ¾˝
1 /˝ /˝ /˝
Inside Corner Molding
ICM8 • Solid wood • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
¾˝
Outside Corner Molding
OSC8 • Solid wood • Used to finish outside corner where two
panels meet at 90° • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
1˝
¼˝
¼˝
1˝
L5Moldings
Decorative Enhancem
ents
Chair Rail
CR8 • Solid wood • Can also be used as a countertop nosing • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O½˝
1 ½˝
Countertop Wood Edge
CTWE8 • Solid wood • Used as countertop nosing • Can be used under wall cabinets to conceal
light fixtures • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
/˝
/˝
1 ½˝
Inset Light Rail
ILR8 • Solid wood • Can be used under wall cabinets to conceal
light fixtures • Includes a 1 13/16” wide flat recess so that
it can be combined with other 3/4” wide decorative moldings such as Rope Molding (RM8) and Triple Beaded Edging (TBE8)
• All surfaces finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O¾˝
¾˝
/˝
1 /˝ 1/˝
/˝
/˝
/˝
¾˝
1 /˝
/˝
1 /˝
/˝
Narrow Batten Molding
NBM8 • Solid wood • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v ORadius /˝
Radius /˝
¼˝
¾˝
Radius Cabinet Molding
RCM8 • Solid wood • Used as decorative molding above or below
wall cabinets. Can also be used to conceal light fixtures
• Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
/˝ 1 ½˝
2 ½˝
L6 Moldings
Dec
orat
ive
Enha
ncem
ents
Single Bead Round Edge
SBRE8 • Solid wood • Backs not finished • Used to trim the front edge of panels. Can
also be combined with Classic Crown Molding (CCM8) and Inset Light Rail (ILR8)
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
½˝
Triple Bead Edging
TBE8 • Solid wood • Backs not finished • Used to trim front edge of panels. Can also
be combined with Classic Crown Molding (CCM8) or Inset Light Rail (ILR8)
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
½˝
¼˝
Library Molding
LM8 • Solid wood • Includes a 1 9/16” wide flat recess so that
it can be combined with other decorative moldings
• Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
¼˝
½˝
1 /˝
/ ̋
2 /˝
Mirror Molding
MM8 • Solid wood • Used to trim and support mirror glasses • Can be used with 1/8” or 1/4” thick mirror
glass or picture framing. 1/8” mirror glass requires 1/8” masonite backer
• Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
2 /˝
½˝
¼˝
Under Cabinet Molding
UCM8 • Solid wood • Can be used under wall cabinets to conceal
light fixtures • Profile complements most door styles • All surfaces finished • Can be combined with Wood Veneer Paneling
(WSK) to create a flush color -matched underside
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¼˝
2 /˝
¾˝
½˝
L7Moldings
Decorative Enhancem
ents
Quarter Round Molding
QR8 • Solid wood • Can be used to trim between toe kick and
floor • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
Radius /˝
/˝
/˝
Scribe Cove Molding
SCV8 • Solid wood • Allow sufficient space between top of cabinet
and soffit or ceiling to accommodate molding • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
/˝
½˝
Scribe Molding
Solid wood
SM8 Paper wrapped
r SPM8
• Solid wood • SM8 not finished on bottom or backside • SPM8 not finished on 23/32” backside • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
I O
¾˝
Radius ¼˝
¼˝ SM8
SPM8
/˝
Radius /˝
¼˝
r Only available in Oak
Wide Scribe Molding
WSM8 • Solid wood • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v ORadius /˝
¼˝
1 ½˝
L8 Moldings
Dec
orat
ive
Enha
ncem
ents
Shoe Molding
SHO8 • Solid wood • Used as inside corner molding or trim
between toekick and floor • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v ORadius ½˝
/˝
½˝
Contemporary Base Board
CBB8 • Solid wood • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O¾˝
Radius ½˝
4 /˝
¾˝
Traditional Base Board
TBB8 • Solid wood • Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O¾˝
Radius /˝
4 /˝
¾˝
Single Bead Pilaster
SBP8 • Solid wood • Finished on all sides • Used as decorative trim panel vertically
between Base, Vanity, Tall and Wall cabinets. Can also be used as a decorative valance
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
4 ¼˝
Triple Bead Pilaster
TBP8 • Solid wood • Finished on all sides • Used as decorative trim panel vertically
between Base, Vanity, Tall and Wall cabinets. Can also be used as a decorative valance
• Molding will be solid hardwood and match the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
4 ¼˝
¾˝¼˝
L9Moldings
Decorative Enhancem
ents
Dentil Molding
DM8 • Solid wood • Used to decorate/trim space between doors
and ceilings/soffit. Can be combined with Classic Crown Molding (CCM8) to create a cornice effect
• Backs not finished • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths • Note: Dentil Molding (DM8) shown used with
Classic Crown Molding (CCM8)
v C
v M
v O
/˝
½˝
Galley Rail
GR8 • Solid wood • Used to trim top of wall cabinets for
decorative effect • Spindles are on 3” centers • Finished on all surfaces • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O/˝
2 /˝1/˝
½˝ ¼˝
¾˝ /˝
1 /˝
Rope Molding
RM8 • Solid wood • Half round • Right twist • Backs not finished • Can be combined with Classic Crown Molding
(CCM8) and Inset Light Rail (ILR8) • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
¾˝
Tapestry Insert Molding
Finished
TIM8 Unfinished
TIM8 •UF
• Solid wood • Hand carved details provide a custom one -
of -a -kind look • Grain direction runs lengthwise • Design is 1 13/16” wide and repeats 53
times in 8’ • Flat on two sides • Can be combined with Classic Crown Molding
(CCM8) • Brie and Meringue finishes only available with
glaze • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
/˝1 /˝
/˝
½˝
Windmere Rope Molding
Finished
WRM8 Unfinished
WRM8 •UF
• Solid wood • Hand carved details provide a custom one -of -
a -kind look • Grain direction runs lengthwise • Flat on three sides • Right twist • Can be combined with Classic Crown Molding
(CCM8) • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 8’ lengths
v C
v M
v O
/˝
/˝
L10 Moldings
Dec
orat
ive
Enha
ncem
ents
Solid Wood Stock
SWS4
SWS6
SWS8
• 3/4” thick solid wood • Grain direction runs lengthwise • Can be used for valance, filler, shelf or other
matching finish, cut -to -size applications • Finished on both sides and both long edges • Molding will be solid hardwood and match
the colors of our maple, cherry and oak finishes
• Offered in individual 4’, 6’ or 8’ lengths
v C
v M
v O
6˝ 48˝ 72˝ 96˝¾˝
L11Molding Accents
Decorative Enhancem
ents
Molding Accents Construction Options and Modifications
I - - - Available with exceptions l - - - Available with an upcharge v - - - Included as standard (Blank) Not available
C - - - Cherry M - - - Maple O - - - Oak
ECB 3 12
code width height
Estero Corbel
Finished
ECB312
ECB49 Unfinished
ECB312 •UF
ECB49 •UF
• Solid wood • Hand carved details provide a custom, “one of
a kind” look • Vertical wood grain • Includes two recessed metal keyhole brackets • Does not include screws
v C
v M
O9˝ 3˝
12˝
2 /̋
6˝ 4˝
9˝
Estero Foot
Finished
EFT Unfinished
EFT •UF
• Solid wood • Hand carved details provide a custom, “one of
a kind” look • Vertical wood grain • Matches toespace of height of base, tall, and
vanity cabinets, except Universal Cabinets
v C
v M
O
3˝ square2 ½˝ square
4 ½˝
1 ½˝ square
Estero Leg
Finished
ELB34 Unfinished
ELB34 •UF
• Solid wood • Vertical wood grain • Matches height of base cabinets
v C
v M
O
3˝ square
5˝
34 ½˝
L12 Molding Accents
Dec
orat
ive
Enha
ncem
ents
Tapestry Corbel
Finished
TCB312
TCB49 Unfinished
TCB312 •UF
TCB49 •UF
• Solid wood • Hand carved details provide a custom, “one of
a kind” look • Vertical wood grain • Includes two recessed metal keyhole brackets • Does not include screws
v C
v M
O9˝ 3˝
12˝
6˝ 4˝
9˝
Tapestry Foot
Finished
TFT Unfinished
TFT •UF
• Solid wood • Vertical wood grain • Matches toespace of height of base, tall, and
vanity cabinets, except Universal Cabinets
v C
v M
O
2 ½˝ square
4 ½˝
2 /˝ diameter
/˝ dia.
Tapestry Leg
Finished
TLB34 Unfinished
TLB34 •UF
• Solid wood • Vertical wood grain • Matches height of base cabinets
v C
v M
O
3˝ square
5˝
34 ½˝
L13Molding Accents
Decorative Enhancem
ents
Windmere Corbel
Finished
WCB312
WCB49 Unfinished
WCB312 •UF
WCB49 •UF
• Solid wood • Hand carved details provide a custom, “one of
a kind” look • Vertical wood grain • Includes two recessed metal keyhole brackets • Does not include screws
v C
v M
O
9˝ 3˝
12˝
6˝ 4˝
9˝
Windmere Foot
Finished
WDFT Unfinished
WDFT •UF
• Solid wood • Vertical wood grain • Matches toespace of height of base, tall, and
vanity cabinets, except Universal Cabinets
v C
v M
O
4 ½"
2 ½" diameter
Windmere Leg
Finished
WDLB34 Unfinished
WDLB34 •UF
• Solid wood • Vertical wood grain • Matches height of base cabinets
v C
v M
O
3˝ square
5˝
34 ½˝
Tapered Leg
Finished
TPL
TPL34 Unfinished
TPL •UF
TPL34 •UF
• Solid wood • Vertical wood grain • Matches height of base cabinets • Trim to fit installation
v C
v M
v O
34 ½˝
3 ¾˝
2 ½˝
Top View
2 ½˝
Bottom View
1 /˝
L14 Molding Accents
Dec
orat
ive
Enha
ncem
ents
Plain Square Posts
PSP6X6 •30
PSP6X6 •34
PSP6X6 •36
PSP6X6 •42
• Solid wood • Vertical wood grain • 1/8” thick radius corners • Not available unfinished • Mitered corners provide the appearance of
one piece solid wood • 3/4” thick solid wood sides with 4 1/2” square
hollow center
v C
v M
v O
6˝ square
30˝34 ½˝36˝42˝
Spindles
Finished
SP536
SP542 Unfinished
I SP536 •UF
I SP542 •UF
• Solid wood • Vertical wood grain • 1/8” thick radius corners • For 34 1/2” tall applications, order a SP536 or
RSP5 and field cut
I C
v M
I O
7˝
36˝42˝
6 ½˝
4 ¾˝ square
I Only available in Maple
Roman Spindles
Finished
RSP536
RSP542 Unfinished
I RSP536 •UF
I RSP542 •UF
• Solid wood • Vertical wood grain • For 34 1/2” tall applications, order a RSP536
and field cut
I C
v M
I O
36˝42˝
6 /˝
6 /˝
4 ¾˝ square
I Only available in Maple
L15L15 L15Decorative Hardware
Decorative Enhancem
ents
White Ceramic Knob
HK02 27mm x 33mm
Satin Nickel Rope Knob
HK107 23mm x 30mm
Solid Bright Brass Knob
HK108 27mm x 30mm
Nickel Knob
HK109 Brushed Satin 27mm x 30mm HK110 Black 27mm x 30mm
Decorative Hardware
Construction Options and Modifications
Color variation may exist between decorative hardware designs that share same finish color name.HK02
code
Satin Nickel Suitcase Pull
HP103 3 25/32” center
Satin Nickel Rope Pull
HP106 3 25/32” center
• ADA compliant
L16
Dec
orat
ive
Enha
ncem
ents
Bright Chrome Knob
HK111 27mm x 30mm
Satin Aluminum Knob
HK117 27mm x 30mm
Antique Iron Knob
HK119 28mm x 36mm
Satin Nickel Round Knob
HK120 28mm x 36mm
Antique Pewter Braided Knob
HK123 37mm x 62mm
Satin Aluminum Boat Cleat Transitional Pull
HP112 3 25/32” center
Satin Nickel Traditional Pull
HP118 3” center
Antique Pewter Braided Pull
HP124 5 1/32” center
• ADA compliant
Decorative Hardware
L17L17
Decorative Enhancem
ents
Copper-Pewter Knob
HK125 25mm x 37mm
Flower Knob
HK126 Rusty 25mm x 37mm
HK127 Dusty Copper 25mm x 37mm
HK128 Antique Pewter 25mm x 37mm
Modern Satin Nickel Knob
HK137 25mm x 30mm
Satin Nickel Wire Cable Pull
HP131 5 1/32” center
Satin Nickel Canoe Pull
HP135 3 25/32” center
Satin Nickel Football Shaped Knob
HK138 37mm x 35mm
Fusilli Pull
HP139 Satin Nickel 3 25/32” center
HP140 White 3 25/32” center
• ADA compliant
Brushed Satin Pewter French Tassel Round Knob
HK150 31mm x 38mm
Decorative Hardware
L18
Dec
orat
ive
Enha
ncem
ents
Decorative Hardware
Brushed Satin Pewter French Tassel Pull
HP151 3” center
Black Ceramic Insert Round Knob
HK152 31mm x 35mm
Black Ceramic Insert Pull
HP153 3” center
2 /˝
Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull
HP154 2 33/64” center
Tumbled Dark Gunmetal Round Knob
HK155 29mm x 37mm
Oil Rubbed Bronze Cup Pull
HP156 2 33/64” or 3” center
Oil Rubbed Bronze Round Knob
HK157 28mm x 36mm
Satin Nickel Diminishing Knob
HK158 20mm x 50mm
32mm
• ADA compliant
L19L19
Decorative Enhancem
ents
Decorative Hardware
Satin Nickel Wavy Pull
HP159 5 1/32” center
Ochre Finished Ceramic Totem Pull
HP160 3 25/32” center
Ochre Finished Ceramic Totem Knob
HK161 32mm x 35mm
Venetian Bronze Copper French Lace Knob
HK162 32mm x 38mm
Traditional Pull
HP163 Chrome 32mm x 35mm HP164 Satin Nickel 32mm x 35mm HP165 Bright Brass 32mm x 35mm HP166 Black Nickel 32mm x 35mm
Notes
L20 Notes
Notes
Dec
orat
ive
Enha
ncem
ents
M1Hardware
Replacement Parts
Hardware Construction Options and Modifications
FADBK
code
Adjustable Door Buffer Kit
FADBK • Soft-closing technology provides smooth and silent closure of door
• One required per door; PC, U and VLC cabinets require two
• Mounting hardware included • One per carton • Note: Requires field installation
Hardware Template Kit
HTK • Handy drill jig for universal hardware drilling • High-impact grey polycarbonate template
with hardened steel drill bushings • Adjustable for use with all drawers and doors • One per carton
Partial overlay spacer and screws
M2 Touch-Up
Repl
acem
ent P
arts
Touch-Up Construction Options and Modifications
QST •C58M
code finish
Cabinet Care Kit
CCK • One 8 oz. squeeze bottle of concentrated wood cleaner
• One 8 oz. squeeze bottle of cabinet/furniture polish and restorer
• Two 13” x 12” cleaning and polishing cloths • One 17” x 13” dusting cloth
Cabinet Care Kit
Polish Cleaner
Edge Banding
EDB25 • Used for finishing edges of panels • Roll is 25’ long, 15/16” wide and 14 mil thick • Melamine edge banding with pre-applied hot
melt adhesive • Available in all finishes • For Natural w/Java Glaze, use Maple Natural • For Allspice w/Ebony Glaze, use Maple
Allspice • One roll per carton
Aerosol Can
Primer
ACPR •C55M Brie Maple
ACPR •C59M Meringue Maple
ACPR •D76M Truffle Maple Topcoat
ACTC •C55M Brie Maple
ACTC •C59M Meringue Maple
ACTC •D76M Truffle Maple
• 13 oz. aerosol spray can
Gray color coding indicates new product, size or code.
M3Touch-Up
Replacement Parts
Touch-Up Quart
Topcoat
QCTC Clear Sealer, Natural Stain
QST •C53M Allspice Maple
QST •C58M Chutney Maple
QST •C63M Pepper Maple
QST •C63O Pepper Oak
QST •C64M Poppy Seed Maple
QST •C65C Pumpernickel Cherry
QST •C65M Pumpernickel Maple
QST •C65O Pumpernickel Oak
QST •C66C Strudel Cherry
QST •C66O Strudel Oak
QST •C68M Toasted Sesame Maple Paint
QP •C55M Brie Maple
QP •C59M Meringue Maple
QP •D76M Truffle Maple Glaze
QSTGL •EBZ Ebony Glaze
QSTGL •JVZ Java Glaze
QSTGL •DSZ Pumpkin Glaze
QSTGL •TNZ Tuscan Glaze
• Matching stain, paint, glaze and clear sealer/topcoat
• Available in quarts only
Quart
Gray color coding indicates new product, size or code.
Touch-Up Kit Stain
TUK •C53M Allspice Maple
TUK •C58M Chutney Maple
TUK •C61M Natural Maple
TUK •C61O Natural Oak
TUK •C63M Pepper Maple
TUK •C63O Pepper Oak
TUK •C64M Poppy Seed Maple
TUK •C65C Pumpernickel Cherry
TUK •C65M Pumpernickel Maple
TUK •C65O Pumpernickel Oak
TUK •C66C Strudel Cherry
TUK •C66O Strudel Oak
TUK •C68M Toasted Sesame Maple Paint
TUK •C55M Brie Maple
TUK •C59M Meringue Maple
TUK •D76M Truffle Maple Stain w/Glaze
TUK •C54M Allspice w/Ebony Glaze Maple
TUK •C62M Natural w/Java Glaze Maple
TUK •C67C Strudel w/Java Glaze Cherry
TUK •C69M Toasted Sesame w/Java Glaze Maple Paint w/Glaze
TUK •C56M Brie w/Pumpkin Glaze Maple
TUK •C57M Brie w/Tuscan Glaze Maple
TUK •C60M Meringue w/Tuscan Glaze Maple
• Available in all finishes • Used for final touch up and detailing • Kit includes Touch Up Pen (TP), Fill Stick (FS),
a bottle of touch up topcoat and a plastic storage case
Gray color coding indicates new product, size or code.
M4 Touch-Up
Repl
acem
ent P
arts
Touch-Up Pen
Stain
TP •C53M Allspice Maple
TP •C58M Chutney Maple
TP •C61M Natural Maple
TP •C61O Natural Oak
TP •C63M Pepper Maple
TP •C63O Pepper Oak
TP •C64M Poppy Seed Maple
TP •C65C Pumpernickel Cherry
TP •C65M Pumpernickel Maple
TP •C65O Pumpernickel Oak
TP •C66C Strudel Cherry
TP •C66O Strudel Oak
TP •C68M Toasted Sesame Maple Paint
TP •C55M Brie Maple
TP •C59M Meringue Maple
TP •D76M Truffle Maple Stain w/Glaze
TP •C54M Allspice w/Ebony Glaze Maple
TP •C62M Natural w/Java Glaze Maple
TP •C67C Strudel w/Java Glaze Cherry
TP •C69M Toasted Sesame w/Java Glaze Maple Paint w/Glaze
TP •C56M Brie w/Pumpkin Glaze Maple
TP •C57M Brie w/Tuscan Glaze Maple
TP •C60M Meringue w/Tuscan Glaze Maple
• Felt tip marker with matching stain • Available in all finishes
Gray color coding indicates new product, size or code.
Fill Stick
Stain
FS •C53M Allspice Maple
FS •C58M Chutney Maple
FS •C61M Natural Maple
FS •C61O Natural Oak
FS •C63M Pepper Maple
FS •C63O Pepper Oak
FS •C64M Poppy Seed Maple
FS •C65C Pumpernickel Cherry
FS •C65M Pumpernickel Maple
FS •C65O Pumpernickel Oak
FS •C66C Strudel Cherry
FS •C66O Strudel Oak
FS •C68M Toasted Sesame Maple Paint
FS •C55M Brie Maple
FS •C59M Meringue Maple
FS •D76M Truffle Maple Stain w/Glaze
FS •C54M Allspice w/Ebony Glaze Maple
FS •C62M Natural w/Java Glaze Maple
FS •C67C Strudel w/Java Glaze Cherry
FS •C69M Toasted Sesame w/Java Glaze Paint w/Glaze
FS •C56M Brie w/Pumpkin Glaze Maple
FS •C57M Brie w/Tuscan Glaze Maple
FS •C60M Meringue w/Tuscan Glaze Maple
• Matching putty crayon • Available in all finishes
Gray color coding indicates new product, size or code.
M5Touch-Up
Replacement Parts
�is listing represents the matching stain, paint and glaze, as well as clear sealer/topcoat needed to reproduce our finishes.
Available in quarts only. �e stains are a “two-step” process, requiring first the application of the hand-wipe stain, followed by the application of the clear sealer/topcoat. Instructions and safety data sheets are packaged with each can of stain or clear sealer/topcoat.
Each stain has been developed for a specific wood specie, and is listed within the stain name, i.e., Toasted Seseame Maple. If a stain is applied to a wood specie other than it was originally formulated for the color can be expected to have a different appearance. For the color “Natural”, the sealer/topcoat provides the same results as our facilities.
For optimum in-field color matches, it is recommended that the clear sealer/topcoat be applied following stain application.
�ere is no warranty on stains or items stained outside our facilities.
Important Notes:�e clear sealer/topcoat includes UV inhibitors. Not all sealers/topcoats are clear, and using a formula from another source could alter the appearance and color of the wood.
Items (material) on this page will not ship with your cabinet order but will ship directly from our supplier.
Items Needed to Reproduce Glaze Finishes
Allspice with Ebony Glaze - Allspice Maple Stain (QST •C53M) - Ebony Glaze (QSTGL •EBZ) - Clear Sealer/Topcoat (QCTC) Brie with Pumpkin Glaze - Brie Paint (QP •C59M) - Pumpkin Glaze (QSTGL •DSZ) - Clear Sealer/Topcoat (QCTC) Brie with Tuscan Glaze - Brie Paint (QST •C55M) - Tuscan Glaze (QSTGL •TNZ) - Clear Sealer/Topcoat (QCTC) Meringue with Tuscan Glaze - Meringue Paint (QP •C59M) - Tuscan Glaze (QSTGL •TNZ) - Clear Sealer/Topcoat (QCTC) *Natural with Ebony Glaze - Ebony Glaze (QSTGL •EBZ) - Clear Sealer/Topcoat (QCTC) *Natural with Java Glaze - Java Glaze (QSTGL •JVZ) - Clear Sealer/Topcoat (QCTC) Strudel with Java Glaze - Strudel Cherry Stain (QST •C66C) - Java Glaze (QSTGL •JVZ) - Clear Sealer/Topcoat (QCTC) Toasted Sesame with Java Glaze - Toasted Sesame Maple Stain (QST •C68M) - Java Glaze (QSTGL •JVZ) - Clear Sealer/Topcoat (QCTC)
*No stain is needed for Natural �nish
Glaze Finish Replication Process
M6 Notes
Notes
Repl
acem
ent P
arts
M7Replacement Parts
Replacement Parts
Replacement Parts Construction Options and Modifications
GDESM18KIT
code
3/4 Extension Side Mount Roller Guide Kit
PSMROTR18
PSMROTR21
PSMROTR24
• 75 lb. capacity • White epoxy coated steel • Kit includes left and right guides and
mounting hardware • 18 deep used on 18” deep cabinets • 21 deep used on 21” deep cabinets • 24 deep used on 24” deep cabinets • One kit per carton
3/4 Extension Side Mount Roller Guide Peninsula Base Kit
PSMROTRPB24 • 75 lb. capacity • White epoxy coated steel • Kit includes left and right guides and
mounting hardware • Used on Peninsula Base (PB) cabinets • One kit per carton
Full Extension Side Mount Ball Bearing Guide Kit
21” Deep For DFD Cabinets
PFXSMBBK21 24” Deep
For B_Butt•2FWTFX and
B_Butt•2DFWTFX Cabinets
PFXSMBBK24
• 75 lb. capacity • Full extension guide, pulls out past the face
frame • Kit includes left and right guides and
mounting hardware • One kit per carton
M8 Replacement Parts
Repl
acem
ent P
arts
Full Extension Under Mount Guide Kit
PFXSCDR18
PFXSCDR21
PFXSCDR24
• 75 lb. capacity • Full extension guide, pulls out past the face
frame • Kit includes left and right guides and
mounting hardware • 18 deep used on 18” deep cabinets • 21 deep used on 21” deep cabinets • 24 deep used on 24” deep cabinets • One kit per carton
Full Extension Under Mount Peninsula Base Guide Kit
PFXSCDRPB24 • 75 lb. capacity • Full extension guide, pulls out past the face
frame • 24 deep used on 24” deep cabinets • One kit per carton
Full Extension Heavy Duty Under Mount Guide Set
PHDFXSCDR24 • 75 lb. capacity • Full extension guide, pulls out past the face
frame • Set includes left and right guides • Used on Base Pots and Pans Storage (BPPS)
cabinets • One set per carton
Locking Device - Full Extension Heavy Duty Under Mount Guides
Left
HDFXSCDC •L Right
HDFXSCDC •R
• Used on Base Pots and Pans Storage (BPPS) cabinets
• One per carton
left shown
right shown
M9Replacement Parts
Replacement Parts
Rear Adjustment Adapter - Full Extension Heavy Duty Under Mount Soft Action+™ Guides
PHDFXSCRMB • Attaches using the guide holes in the back of the cabinet
• Used on Base Pots and Pans Storage (BPPS) cabinets
• Includes a left and right rear adjustment adapter
• One set per carton
170 Degree Hinge
RH170EZ • Nickel plated finish • Includes hinge and mounting plate • Used on Traditional and Full Overlay Lazy
Susan (LS), Base Corner Fixed Shelf (BCFS) and Wall Easy Reach (WEZR) cabinets
• Offered individually
Bi-Fold Hinge
RHBF • Nickel plated finish • Includes hinge and mounting plate • Used on Traditional and Full Overlay Base
Corner Revolving (BCR) and Lazy Susan (LS) • Offered individually
Face Mount Hinge
PHFM • Nickel plated finish • Used on Traditional and Full Overlay Wall
Microwave Cabinet (WMC) and Oven Cabinet Universal (O_U) cabinets
• Offered as a pair
M10 Replacement Parts
Repl
acem
ent P
arts
Full Overlay 4 Way Hinge
PH4FO • Nickel plated finish • 4 way door adjustment • Includes hinges and mounting screws • Used on Full Overlay 39” and 42” high Wall
Cabinets with glass/prepared for glass • Offered as a pair
Full Overlay 6 Way Hinge
PH6FO • Nickel plated finish • 6 way door adjustment • Includes hinges and mounting screws • Used on Full Overlay cabinets • Offered as a pair
Traditional Overlay 2 Way Hinge
PH2PO • Nickel plated finish • 2 way door adjustment • Includes hinges and mounting screws • Used on Traditional Overlay 39” and 42” high
Wall Cabinets glass/prepared for glass • Offered as a pair
Traditional Overlay 6 Way Hinge
PH6PO • Nickel plated finish • 6 way door adjustment • Includes hinges and mounting screws • Used on Traditional Overlay cabinets • Offered as a pair
M11Replacement Parts
Replacement Parts
Medicine Cabinet Pack Hinge
RHP •TVMC • Nickel plated finish • Includes upper and lower hinge, bushings and
mounting screws • Used on Mirror Cabinet (MC) and Tri-View
Medicine Cabinet (TV) cabinets • Offered individually
Utility Tray Hinge
PHUTK • Nickel plated finish • Includes left/right hinges and mounting
screws • Used on Sink Base (SB) w/Utility Tray cabinets
and Utility Tray Kits (UTK) • Offered as a pair
3/4” Shelf Clip with Stop
Left
BOX •SC34•L Right
BOX •SC34•R
• Clear plastic locking clip with front edge restraint
• Used for base cabinets with Half Depth Shelf Option
• Offered individually
Left Clip Shown
Shelf Support Center
BOX •CSC • Clear plastic center shelf support • Used to support the front edge of shelf, insert
into hole in back of frame center stile • Offered individually
M12 Replacement Parts
Repl
acem
ent P
arts
Vent Clip Pack
BOX •VC • Used to attach false drawer fronts on Sink Base and select Vanity Cabinets
• Includes 2 clips, 2 post and mounting screws per pack
• Offered individually
Installation Screws
BOX •INSC • Screws are 2 1/2” long • Offered in quantities of 100
Glass Retainer
GDRS • For use Prepared for Bistro Glass (_DRS.PREP_), Prepared for Savanah Mullion Glass (_SV.PREP_) and Prepared for Traditional Mullion (_MD.PREP_)
• Available in rolls of 10 feet
Replacement Parts
Door & Drawer Fronts - How to use L13
This guide allows you to choose from a complete line of doors and drawer fronts for replacement as well as special applications such as appliance fronts, whirlpool skirts, wainscoting, etc.
This section is divided into three parts
I. Part Index This part lists all cabinets alphabetically by their nomenclature and tells you the corresponding replacement doors and drawer fronts used on that cabinet. Find your door style in the index on the following pages to determine the configuration to use.
II. Sizes This part lists all replacement doors and drawer fronts by their nomenclature. They are sorted by their nominal height (last two numbers of the nomenclature) from largest to smallest.
To choose doors and drawer fronts for replacement, use the Part Index section to look up the cabinet and deter-mine which doors and drawer fronts are needed. Then look up the door(s) and drawer front(s) in the Price List catalog under the price column number appropriate to your door style.
To choose doors and drawer fronts for special decorative applications, use the Sizes section and look in the ap-propriate overlay column to determine which doors and drawer fronts are needed. Then look up the door(s) and drawer front(s) in the Price List catalog under the price column number appropriate to your door style.
III. Drawer Boxes This part lists all replacement drawer boxes by their nomenclature. They are sorted by their nominal height (last two numbers of the nomenclature) from smallest to largest.
How to Use This Section
Replacement Door & Drawer Front Information
Replacement doors may be ordered for wall or base application. When ordering, specify door style, hinging and •W (wall) or •B (base). Any arch doors ordered as •B will be shipped in a square design.
Example: You need a replacement door for a wall 1830, hinged left.
Order: RD1830L•W
Replacement doors are prepared for hinges. Replacement doors and drawer fronts are shipped with pliable bumpers attached.
Replacement doors with Bistro Glass, Savanna Glass, or Traditional Mullion Glass installed are available on select cabinets. To order, determine the replacement door(s) required and add desired glass insert.
Example: You need a Bistro Glass insert for a wall 1830, hinged left.
Order: RD1830L•W–1BIS1 Pricing: RD1830L•W + 1 Bistro Insert for 12”-30”high = Total for replacement door with insert installed
Example: You need a Traditional Mullion Glass insert for a wall 1836, hinged left.
Order: RD1836L•W–1MD2 Pricing: RD1836L•W + 1 Traditional Mullion Insert for 36”-42” high = Total for mullion door with insert installed
Replacement doors and drawer fronts are coded for easy refer-ence. The prefix codes indicate door or drawer and usage. The first two digits indicate nominal width and the second two digits indicate nominal height.
RD 18 30
Prefix Nominal Nominal code Width Height
Prefix codes are as follows: RD replacement door RDB replacement door butt RDBBC replacement door base blind corner RDBCA replacement door blind corner angle RDEZR* replacement door easy reach (two doors hinged together) RDBPP replacement door base pots and pans RDBWBT replacement door base waste basket top mount RDDFD replacement door desk file drawer RDWBC replacement door wall blind corner RDW replacement drawer front RDWSFA replacement drawer sink front angle RDWVSB replacement drawer vanity sink base
Replacement Parts
Door & Drawer Fronts - How to use M13
How to Use This Section
Replacement Door & Drawer Front Information
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexM14
B12 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206B12•FH 1 RD1230 1 RD1230B15 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506B15•FH 1 RD1530 1 RD1530B18 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806B18•FH 1 RD1830 1 RD1830B21 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106B21•FH 1 RD2130 1 RD2130B24 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406B24•FH 1 RD2430 1 RD2430B24BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406B24BUTT•FH 2 RDB2430 2 RDB2430B27(Butt) 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706B27(Butt)•FH 2 RD2730 2 RD2730B27•FH 2 RD2730 2 RD2730B30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006B30BUTT•FH 2 RD3030 2 RD3030B33BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306B33BUTT•FH 2 RDB3330 2 RDB3330B36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606B36BUTT•FH 2 RD3630 2 RD3630B39 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906B39•FH 2 RD3930 2 RD3930B42 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106B42•FH 2 RD2130 2 RD2130B45 2 RD4524 2 RD4524 2 RDW4506 2 RDW4506B45•FH 2 RD4530 2 RD4530B48 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406B48•FH 2 RD2430 2 RD2430B54 3 RD1824 3 RD1824 3 RDW1806 3 RDW1806B9•FH 1 RD0930 1 RD0930BBC39 1 RDBBC3624 1 RDBBC3624 1 RDWBBC3606 1 RDWBBC3606BBC42 1 RDBBC3924 1 RDBBC3924 1 RDWBBC3906 1 RDWBBC3906BBC45 1 RD3324 1 RD3324 1 RDWBBC4206 1 RDWBBC4206BBC48 1 RD3924 1 RD3924 1 RDWBBC4506 1 RDWBBC4506BBC51 1 RD4524 1 RD4524 1 RDWBBC4806 1 RDW4506BCA24BUTT 2 RDBCA2430 2 RDBCA2430BCD24•4D 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406BCD30•4D 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006BCD36•4D 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606BCFS36 1 RDEZR36 1 RDEZR36BD12 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211BD12•3 1 RDW1206 1 RDW1206 2 RDW1215 2 RDW1215BD15 3 RDW1506 3 RDW1506 1 RDW1511 1 RDW1511
BD15•3 1 RDW1506 1 RDW1506 2 RDW1515 2 RDW1515BD18 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811BD18•3 1 RDW1806 1 RDW1806 2 RDW1815 2 RDW1815BD21 3 RDW2106 3 RDW2106 1 RDW2111 1 RDW2111BD21•3 1 RDW2106 1 RDW2106 2 RDW2115 2 RDW2115BD24 3 RDW2406 3 RDW2406 1 RDW2411 1 RDW2411BD24•3 1 RDW2406 1 RDW2406 2 RDW2415 2 RDW2415BD27 3 RDW2706 3 RDW2706 1 RDW2711 1 RDW2711BD27•3 1 RDW2706 1 RDW2706 2 RDW2715 2 RDW2715BD30•3 1 RDW3006 1 RDW3006 2 RDW3015 2 RDW3015BD33•3 1 RDW3306 1 RDW3306 2 RDW3315 2 RDW3315BD36•3 1 RDW3606 1 RDW3606 2 RDW3615 2 RDW3615BEA12 1 RD1530 1 RD3330BEC24 2 RD1830 2 RD1830BMC2434 1 RDW2415 1 RDW2415BMC2734 1 RDW2715 1 RDW2715BMC3034 1 RDW3015 1 RDW3015BPP9 1 RDBPP0930 1 RDBPP0930BPPS27•2 2 RDW2716 2 RDW2716BPPS30•2 2 RDW3016 2 RDW3016BPPS33•2 2 RDW3316 2 RDW3316BPPS36•2 2 RDW3616 2 RDW3616BWBT15 1 RDBWBT1524 1 RDBWBT1524 1 RDW1506 1 RDW1506BWBT18•2 1 RDBWBT1824 1 RDBWBT1824 1 RDW1806 1 RDW1806DDO15 1 RD1518 1 RD1518 1 RDW1506 1 RDW1506DDO18 1 RD1818 1 RD1818 1 RDW1806 1 RDW1806DDO21 1 RD2118 1 RD2118 1 RDW2106 1 RDW2106DDO24 1 RD2418 1 RD2418 1 RDW2406 1 RDW2406DDR12 2 RDW1206 2 RDW1206 1 RDW1213 1 RDW1213DDR15 2 RDW1506 2 RDW1506 1 RDW1513 1 RDW1513DDR18 2 RDW1806 2 RDW1806 1 RDW1813 1 RDW1813DDR21 2 RDW2106 2 RDW2106 1 RDW2113 1 RDW2113DDR24 2 RDW2406 2 RDW2406 1 RDW2413 1 RDW2413DFD15 1 RDDFD15 1 RDDFD15 1 RDW1506 1 RDW1506DFD18 1 RDDFD18 1 RDDFD18 1 RDW1806 1 RDW1806DFD21 1 RDDFD21 1 RDDFD21 1 RDW2106 1 RDW2106DFD24 1 RDDFD24 1 RDDFD24 1 RDW2406 1 RDW2406DKD24 1 RDW2404 1 RDW2404DKD30 1 RDW3004 1 RDW3004DKD36 1 RDW3604 1 RDW3604DKDT24 1 RDW1804 1 RDW1804DKDT30 1 RDW2404 1 RDW2404DKDT36 1 RDW3004 1 RDW3004DOS18 1 RD1818 1 RD1818DOS24BUTT 2 RDB2418 2 RDB2418DSB30 2 RD1521 2 RD1521DSB33 2 RD3321 2 RD3321DSB36 2 RD1821 2 RD1821
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index M15
LS33 1 RDEZR33 1 RDEZR33LS36 1 RDEZR36 1 RDEZR36LSA36 1 RD1530 1 RD3330OC27_90S 4 RD2724 4 RD2724OC27_93S 2 RD2724 2 RD2724 2 RD2727 2 RD2727OC2784(Butt)S 2 RD2718 2 RD2718 2 RD2724 2 RD2724OC2784(Butt)U 2 RD2718 2 RD2718 1 RDW2706 1 RDW2706OC2790(Butt)U 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706OC2793(Butt)U 2 RD2727 2 RD2727 1 RDW2706 1 RDW2706OC2796(Butt)S 2 RD2724 2 RD2724 2 RD2730 2 RD2730OC2796(Butt)U 2 RD2730 2 RD2730 1 RDW2706 1 RDW2706OC30_84BUTTS 2 RD3018 2 RD3018 2 RD3024 2 RD3024OC30_84BUTTU 2 RD3018 2 RD3018 1 RDW3006 1 RDW3006OC30_90BUTTS 4 RD3024 4 RD3024OC30_90BUTTU 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006OC30_93BUTTS 2 RD3024 2 RD3024 2 RD3027 2 RD3027OC30_93BUTTU 2 RD3027 2 RD3027 1 RDW3006 1 RDW3006OC30_96BUTTS 2 RD3024 2 RD3024 2 RD3030 2 RD3030OC30_96BUTTU 2 RD3030 2 RD3030 1 RDW3006 1 RDW3006OC33_84BUTTS 2 RDB3318 2 RDB3318 2 RDB3324 2 RDB3324OC33_84BUTTU 2 RDB3318 2 RDB3318 1 RDW3306 1 RDW3306OC33_90BUTTS 4 RDB3324 4 RDB3324OC33_90BUTTU 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306OC33_93BUTTS 2 RDB3324 2 RDB3324 2 RDB3327 2 RDB3327OC33_93BUTTU 2 RDB3327 2 RDB3327 1 RDW3306 1 RDW3306OC33_96BUTTS 2 RDB3324 2 RDB3324 2 RDB3330 2 RDB3330OC33_96BUTTU 2 RDB3330 2 RDB3330 1 RDW3306 1 RDW3306ODK27 1 RDW2706 1 RDW2706ODK30 1 RDW3006 1 RDW3006ODK33 1 RDW3306 1 RDW3306PB18 2 RD1824 2 RD1824 2 RDW1806 2 RDW1806PB21 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106PB24 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406PB24BUTT 4 RDB2424 4 RDB2424 2 RDW2406 2 RDW2406PB27(Butt) 4 RD2724 4 RD2724 2 RDW2706 2 RDW2706PB30BUTT 4 RD3024 4 RD3024 2 RDW3006 2 RDW3006PB36BUTT 4 RD3624 4 RD3624 2 RDW3606 2 RDW3606PBBC27 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406PC36_84BUTT 2 RD3618 2 RD3618 2 RD3663 2 RD3663PC36_90BUTT 2 RD3624 2 RD3624 2 RD3663 2 RD3663PC36_93BUTT 2 RD3627 2 RD3627 2 RD3663 2 RD3663PC36_96BUTT 2 RD3630 2 RD3630 2 RD3663 2 RD3663PW1824 2 RD1824 2 RD1824
PW1830 2 RD1830 2 RD1830PW2124 2 RD2124 2 RD2124PW2130 2 RD2130 2 RD2130PW2418 2 RD2418 2 RD2418PW2418BUTT 4 RDB2418 4 RDB2418PW2424 2 RD2424 2 RD2424PW2424BUTT 4 RDB2424 4 RDB2424PW2430 2 RD2430 2 RD2430PW2430BUTT 4 RDB2430 4 RDB2430PW3018BUTT 4 RD3018 4 RD3018PW3024BUTT 4 RD3024 4 RD3024PW3030BUTT 4 RD3030 4 RD3030PW3618BUTT 4 RD3618 4 RD3618PW3624BUTT 4 RD3624 4 RD3624PW3630BUTT 4 RD3630 4 RD3630PWA2430 LR or L 1 RD1530 1 RD3330 1 RD4530 1 RD4530PWA2430 RR or L 1 RD4530 1 RD4530 1 RD1530 1 RD1530PWBC2730 2 RD1230 2 RD1230 1 RDWBC2430 1 RDWBC2430RSF30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006RSF33BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306RSF36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606RSF42 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106SB12•W 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206SB15•W 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506SB18•W 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806SB21•W 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106SB24•W 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406SB24•W•FH 1 RD2430 1 RD2430SB24BUTT•W 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406SB24BUTT•W•FH 2 RDB2430 2 RDB2430SB27(Butt)•W 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706SB27(Butt)•W•FH 2 RD2730 2 RD2730SB27•W 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706SB30BUTT•CG 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SB30BUTT•CG•UT 2 RD3024 2 RD3024 1 RDW3006.UT 1 RDW3006.UTSB30BUTT•W 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SB30BUTT•W•FH 2 RD3030 2 RD3030SB33BUTT•CG 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306SB33BUTT•CG•UT 2 RDB3324 2 RDB3324 1 RDW3306.UT 1 RDW3306.UTSB33BUTT•W 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306SB33BUTT•W•FH 2 RDB3330 2 RDB3330SB33BUTT•W•UT 2 RDB3324 2 RDB3324 1 RDW3306.UT 1 RDW3306.UTSB36BUTT•CG 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SB36BUTT•CG•UT 2 RD3624 2 RD3624 1 RDW3606.UT 1 RDW3606.UTSB36BUTT•W 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SB36BUTT•W•FH 2 RD3630 2 RD3630SB36BUTT•W•UT 2 RD3624 2 RD3624 1 RDW3606.UT 1 RDW3606.UTSB39•W 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index M15
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexM16
SB39•W•FH 2 RD3930 2 RD3930SB42•W 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106SB42•W•FH 2 RD2130 2 RD2130SB48•W 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406SB48•W•FH 2 RD2430 2 RD2430SBA36 1 RD1524 1 RD1524 1 RDWBBC4206 1 RDWBBC4206SBA42 1 RDSFA4224 1 RDSFA4224 1 RDWSFA4206 1 RDWSFA4206SF24 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406SF24BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406SF24BUTT•FH 2 RDB2430 2 RDB2430SF30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SF30BUTT•FH 2 RD3030 2 RD3030SF36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SF36BUTT•FH 2 RD3630 2 RD3630SFA36 1 RD1524 1 RD3324 1 RDW1506 1 RDW1706SFA36•FH 1 RD3330 1 RD3330SFA39 1 RDSFA3924 1 RDSFA3924 1 RDWSFA3906 1 RDWSFA3906SFA42 1 RDSFA4224 1 RDSFA4224 1 RDWSFA4206 1 RDWSFA4206U15_84 1 RD1518 1 RD1518 1 RD1563 1 RD1563U15_90 1 RD1524 1 RD1524 1 RD1563 1 RD1563U15_93 1 RD1527 1 RD1527 1 RD1563 1 RD1563U15_96 1 RD1530 1 RD1530 1 RD1563 1 RD1563U18_84 1 RD1818 1 RD1818 1 RD1863 1 RD1863U18_90 1 RD1824 1 RD1824 1 RD1863 1 RD1863U18_93 1 RD1827 1 RD1827 1 RD1863 1 RD1863U18_96 1 RD1830 1 RD1830 1 RD1863 1 RD1863U24_84 1 RD2418 1 RD2418 1 RD2463 1 RD2463U24_84BUTT 2 RDB2463 2 RDB2418 2 RDB2418 2 RDB2463U24_90 1 RD2424 1 RD2424 1 RD2463 1 RD2463U24_90BUTT 2 RDB2424 2 RDB2424 2 RDB2463 2 RDB2463U24_93 1 RD2427 1 RD2427 1 RD2463 1 RD2463U24_93BUTT 2 RDB2427 2 RDB2427 2 RDB2463 2 RDB2463U24_96 1 RD2430 1 RD2430 1 RD2463 1 RD2463U24_96BUTT 2 RDB2430 2 RDB2430 2 RDB2463 2 RDB2463U30_84BUTT 2 RD3018 2 RD3018 2 RD3063 2 RD3063U30_90BUTT 2 RD3024 2 RD3024 2 RD3063 2 RD3063U30_93BUTT 2 RD3027 2 RD3027 2 RD3063 2 RD3063U30_96BUTT 2 RD3030 2 RD3030 2 RD3063 2 RD3063U36_84BUTT 2 RD3618 2 RD3618 2 RD3663 2 RD3663U36_90BUTT 2 RD3624 2 RD3624 2 RD3663 2 RD3663U36_93BUTT 2 RD3627 2 RD3627 2 RD3663 2 RD3663
U36_96BUTT 2 RD3630 2 RD3630 2 RD3663 2 RD3663UB12 1 RD1221 1 RD1221 1 RDW1206 1 RDW1206UB12•FH 1 RD1227 1 RD1227UB15 1 RD1521 1 RD1521 1 RDW1506 1 RDW1506UB15•FH 1 RD1527 1 RD1527UB18 1 RD1821 1 RD1821 1 RDW1806 1 RDW1806UB18•FH 1 RD1827 1 RD1827UB21 1 RD2121 1 RD2121 1 RDW2106 1 RDW2106UB24 1 RD2421 1 RD2421 1 RDW2406 1 RDW2406UB24•FH 1 RD2427 1 RD2427UB24BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406UB24BUTT•FH 2 RDB2427 2 RDB2427UB27(Butt) 2 RD2721 2 RD2721 1 RDW2706 1 RDW2706UB27(Butt)•FH 2 RD2727 2 RD2727UB30BUTT 2 RD3021 2 RD3021 1 RDW3006 1 RDW3006UB30BUTT•FH 2 RD3027 2 RD3027UB33BUTT 2 RDB3321 2 RDB3321 1 RDW3306 1 RDW3306UB33BUTT•FH 2 RDB3327 2 RDB3327UB36BUTT 2 RD3621 2 RD3621 1 RDW3606 1 RDW3606UB36BUTT•FH 2 RD3627 2 RD3627UB39•FH 2 RD3927 2 RD3927UB42 2 RD2121 2 RD2121 2 RDW2106 2 RDW2106UB42•FH 2 RD2127 2 RD2127UB45•FH 2 RD4527 2 RD4527UB48•FH 2 RD2427 2 RD2427UB9•FH 1 RD0927 1 RD0927UBD12•3 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211UBD15•3 1 RDW1506 1 RDW1506 2 RDW1511 2 RDW1511UBD18•3 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811UBD21•3 1 RDW2106 1 RDW2106 2 RDW2111 2 RDW2111UBD24•3 1 RDW2406 1 RDW2406 2 RDW2412 2 RDW2412UBSF36BUTT•FH 2 RD3627 2 RD3627UBT24BUTT 2 RDB2421 2 RDB2421 1 RDW2406.UBT 1 RDW2406.UBTULS36 1 RDEZR3627 1 RDEZR3627URSF30BUTT 2 RD3024 2 RD3024URSF33BUTT 2 RDB3324 2 RDB3324URSF36BUTT 2 RD3624 2 RD3624URSF42 2 RD2124 2 RD2124USFCK30BUTT•FH 2 RD3027 2 RD3027USFCK33BUTT•FH 2 RDB3327 2 RDB3327USFCK36BUTT•FH 2 RD3627 2 RD3627USFCK42•FH 2 RD2127 2 RD2127VB12_31 1 RD1221 1 RD1221 1 RDW1206 1 RDW1206VB12_34 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206VB15_31 1 RD1521 1 RD1521 1 RDW1506 1 RDW1506VB15_34 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506VB18_31 1 RD1821 1 RD1821 1 RDW1806 1 RDW1806VB18_31•FH 1 RD1827 1 RD1827VB18_34 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806VB18_34•FH 1 RD1830 1 RD1830
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index M17
VB21_31 1 RD2121 1 RD2121 1 RDW2106 1 RDW2106VB21_31•FH 1 RD2127 1 RD2127VB21_34 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106VB21_34•FH 1 RD2130 1 RD2130VB24_31 1 RD2421 1 RD2421 1 RDW2406 1 RDW2406VB24_31•FH 1 RD2427 1 RD2427VB24_31BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406VB24_31BUTT•FH 2 RDB2427 2 RDB2427VB24_34 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406VB24_34•FH 1 RD2430 1 RD2430VB24_34BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406VB24_34BUTT•FH 2 RDB2430 2 RDB2430VB27_31•FH 2 RD2727 2 RD2727VB27_34•FH 2 RD2730 2 RD2730VB30_31BUTT•FH 2 RD3027 2 RD3027VB30_34BUTT•FH 2 RD3030 2 RD3030VB33_31BUTT•FH 2 RDB3327 2 RDB3327VB33_34BUTT•FH 2 RDB3330 2 RDB3330VB36_31BUTT•FH 2 RD3627 2 RD3627VB36_34BUTT•FH 2 RD3630 2 RD3630VB39_31•FH 2 RD3927 2 RD3927VB39_34•FH 2 RD3930 2 RD3930VB42_31•FH 2 RD2127 2 RD2127VB42_34•FH 2 RD2130 2 RD2130VB48_31•FH 2 RD1527 2 RD1527 1 RD1827 1 RD1827VB48_34•FH 2 RD1530 2 RD1530 1 RD1830 1 RD1830VB54_31•FH 3 RD1827 3 RD1827VB54_34•FH 3 RD1830 3 RD1830VB60_31•FH 2 RD1427 2 RD1427 2 RD1527 2 RD1527VB60_34•FH 2 RD1430 2 RD1430 2 RD1530 2 RD1530VBD12_31•3 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211VBD12_34•3 1 RDW1206 1 RDW1206 2 RDW1215 2 RDW1215VBD12_34•4 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211VBD15_31•3 1 RDW1506 1 RDW1506 2 RDW1511 2 RDW1511VBD15_34•3 1 RDW1506 1 RDW1506 2 RDW1515 2 RDW1515VBD15_34•4 3 RDW1506 3 RDW1506 1 RDW1511 1 RDW1511VBD18_31•3 2 RDW1815 2 RDW1815 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811VBD18_34•4 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811VBD21_31•3 1 RDW2106 1 RDW2106 2 RDW2111 2 RDW2111VBD21_34•3 1 RDW2106 1 RDW2106 2 RDW2115 2 RDW2115VBD21_34•4 3 RDW2106 3 RDW2106 1 RDW2111 1 RDW2111VBD24_31•3 1 RDW2406 1 RDW2406 2 RDW2411 2 RDW2411VBD24_34•3 1 RDW2406 1 RDW2406 2 RDW2415 2 RDW2415VBD24_34•4 3 RDW2406 3 RDW2406 1 RDW2414 1 RDW2414VCD24_31DL2 1 RD1221 1 RD1221 2 RDW1211 2 RDW1211 1 RDW2406 1 RDW2406VCD24_31DR2 1 RD1221 1 RD1221 2 RDW1211 2 RDW1211 1 RDW2406 1 RDW2406
VCD24_34DL3 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406VCD24_34DR3 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406VCD30_31DL2 1 RD1521 1 RD1521 2 RDW1511 2 RDW1511 1 RDW3006 1 RDW3006VCD30_31DR2 1 RD1521 1 RD1521 2 RDW1511 2 RDW1511 1 RDW3006 1 RDW3006VCD30_34DL3 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006VCD30_34DR3 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006VCD36_31DL2 1 RD1821 1 RD1821 2 RDW1811 2 RDW1811 1 RDW3606 1 RDW3606VCD36_31DR2 1 RD1821 1 RD1821 2 RDW1811 2 RDW1811 1 RDW3606 1 RDW3606VCD36_34DL3 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606VCD36_34DR3 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606VCD42_31•6 1 RD1821 1 RD1821 2 RDW1206 2 RDW1206 4 RDW1211 4 RDW1211 1 RDW1806 1 RDW1806VCD42_34•8 1 RD1824 1 RD1824 6 RDW1206 6 RDW1206 2 RDW1211 2 RDW1211 1 RDW1806 1 RDW1806VCD48_31•6 1 RD1821 1 RD1821 2 RDW1506 2 RDW1506 4 RDW1511 4 RDW1511 1 RDW1806 1 RDW1806VCD48_34•8 1 RD1824 1 RD1824 6 RDW1506 6 RDW1506 2 RDW1511 2 RDW1511 1 RDW1806 1 RDW1806VCD60_31•6 2 RD1421 2 RD1421 2 RDW1506 2 RDW1506 4 RDW1511 4 RDW1511 1 RDWVSB6006 1 RDWVSB6006VCD60_34•8 2 RD1424 2 RD1424 6 RDW1506 6 RDW1506 2 RDW1511 2 RDW1511 1 RDWVSB6006 1 RDWVSB6006VHB18_31 1 RDVHB1827 1 RDVHB1827VLC15_84 1 RD1518 1 RD1518 1 RD1563 1 RD1563VLC15_90 1 RD1524 1 RD1524 1 RD1563 1 RD1563VLC15_96 1 RD1530 1 RD1530 1 RD1563 1 RD1563VLC18_48 1 RD1848 1 RD1848VLC18_84 1 RD1818 1 RD1818 1 RD1863 1 RD1863VLC18_90 1 RD1824 1 RD1824 1 RD1863 1 RD1863VLC18_96 1 RD1830 1 RD1830 1 RD1863 1 RD1863VLC24_84 1 RD2418 1 RD2418 1 RD2463 1 RD2463VLC24_84BUTT 2 RDB2418 2 RDB2418 2 RDB2463 2 RDB2463
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexM18
VLC24_90 1 RD2424 1 RD2424 1 RD2463 1 RD2463VLC24_90BUTT 2 RDB2424 2 RDB2424 2 RDB2463 2 RDB2463VLC24_96 1 RD2430 1 RD2430 1 RD2463 1 RD2463VLC24_96BUTT 2 RDB2430 2 RDB2430 2 RDB2463 2 RDB2463VSB24_31BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406VSB24_34BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406VSB27_31 2 RD2721 2 RD2721 1 RDW2706 1 RDW2706VSB27_34 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706VSB30_31BUTT 2 RD3021 2 RD3021 1 RDW3006 1 RDW3006VSB30_34BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006VSB33_31BUTT 2 RDB3321 2 RDB3321 1 RDW3306 1 RDW3306VSB33_34BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306VSB36_31•2 2 RD1821 2 RD1821 3 RDW1206 3 RDW1206VSB36_31BUTT 2 RD3621 2 RD3621 1 RDW3606 1 RDW3606VSB36_34•2 2 RD1824 2 RD1824 3 RDW1206 3 RDW1206VSB36_34BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606VSB39_31 2 RD3921 2 RD3921 1 RDW3906 1 RDW3906VSB39_34 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906VSB42_31 2 RD2121 2 RD2121 2 RDW2106 2 RDW2106VSB42_31•2 2 RD1221 2 RD1221 1 RD1821 1 RD1821 2 RDW1206 2 RDW1206 1 RDW1806 1 RDW1806VSB42_34 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106VSB42_34•2 2 RD1224 2 RD1224 1 RD1824 1 RD1824 2 RDW1206 2 RDW1206 1 RDW1806 1 RDW1806VSB48_31•2 2 RD1521 2 RD1521 1 RD1821 1 RD1821 2 RDW1506 2 RDW1506 1 RDW1806 1 RDW1806VSB48_34•2 2 RD1524 2 RD1524 1 RD1824 1 RD1824 2 RDW1506 2 RDW1506 1 RDW1806 1 RDW1806VSB54_31•2 3 RD1821 3 RD1821 3 RDW1806 3 RDW1806VSB54_31•3 2 RD2121 2 RD2121 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211 2 RDW2106 2 RDW2106VSB54_34•2 3 RD1824 3 RD1824 3 RDW1806 3 RDW1806VSB54_34•4 2 RD2124 2 RD2124 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211 2 RDW2106 2 RDW2106VSB60_31•3 2 RD1921 2 RD1921 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811 2 RDW2006 2 RDW2006VSB60_34•2 2 RD1424 2 RD1424 2 RD1524 2 RD1524 2 RDW1506 2 RDW1506 1 RDWVSB6006 1 RDWVSB6006
VSB60_34•4 2 RD1924 2 RD1924 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811 2 RDW2006 2 RDW2006VW1530 1 RD1530 1 RD1530VWB2430BUTT 2 RDB2424 2 RDB2424VWB2648 2 RD1227 2 RD1227W1224 1 RD1224 1 RD1224W1230 1 RD1230 1 RD1230W1236 1 RD1236 1 RD1236W1239 1 RD1239 1 RD1239W1242 1 RD1242 1 RD1242W1524 1 RD1524 1 RD1524W1530 1 RD1530 1 RD1530W1536 1 RD1536 1 RD1536W1539 1 RD1539 1 RD1539W1542 1 RD1542 1 RD1542W1824 1 RD1824 1 RD1824W1830 1 RD1830 1 RD1830W1836 1 RD1836 1 RD1836W1839 1 RD1839 1 RD1839W1842 1 RD1842 1 RD1842W2124 1 RD2124 1 RD2124W2130 1 RD2130 1 RD2130W2136 1 RD2136 1 RD2136W2139 1 RD2139 1 RD2139W2142 1 RD2142 1 RD2142W2418 1 RD2418 1 RD2418W2418BUTT 2 RDB2418 2 RDB2418W2424 1 RD2424 1 RD2424W2424BUTT 2 RDB2424 2 RDB2424W2430 1 RD2430 1 RD2430W2430BUTT 2 RDB2430 2 RDB2430W2436 1 RD2436 1 RD2436W2436BUTT 2 RDB2436 2 RDB2436W2439 1 RD2439 1 RD2439W2439BUTT 2 RDB2439 2 RDB2439W2442 1 RD2442 1 RD2442W2442BUTT 2 RDB2442 2 RDB2442W2712(Butt) 2 RD2712 2 RD2712W2715(Butt) 2 RD2715 2 RD2715W2718(Butt) 2 RD2718 2 RD2718W2724(Butt) 2 RD2724 2 RD2724W2730(Butt) 2 RD2730 2 RD2730W2736(Butt) 2 RD2736 2 RD2736W2739(Butt) 2 RD2739 2 RD2739W2742(Butt) 2 RD2742 2 RD2742W3012BUTT 2 RD3012 2 RD3012W3015BUTT 2 RD3015 2 RD3015W3018BUTT 2 RD3018 2 RD3018W3021BUTT 2 RD3021 2 RD3021W3024BUTT 2 RD3024 2 RD3024W3027BUTT 2 RD3027 2 RD3027W3030BUTT 2 RD3030 2 RD3030W3036BUTT 2 RD3036 2 RD3036W3039BUTT 2 RD3039 2 RD3039W3042BUTT 2 RD3042 2 RD3042W3312BUTT 2 RDB3312 2 RDB3312W3315BUTT 2 RDB3315 2 RDB3315W3318BUTT 2 RDB3318 2 RDB3318W3321BUTT 2 RDB3321 2 RDB3321W3324BUTT 2 RDB3324 2 RDB3324W3327BUTT 2 RDB3327 2 RDB3327W3330BUTT 2 RDB3330 2 RDB3330W3336BUTT 2 RDB3336 2 RDB3336W3339BUTT 2 RDB3339 2 RDB3339W3342BUTT 2 RDB3342 2 RDB3342W3612BUTT 2 RD3612 2 RD3612W3615BUTT 2 RD3615 2 RD3615W3618BUTT 2 RD3618 2 RD3618W3621BUTT 2 RD3621 2 RD3621W3624BUTT 2 RD3624 2 RD3624W3627BUTT 2 RD3627 2 RD3627
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index M19
W3630BUTT 2 RD3630 2 RD3630W3636BUTT 2 RD3636 2 RD3636W3639BUTT 2 RD3639 2 RD3639W3642BUTT 2 RD3642 2 RD3642W3912 2 RD3912 2 RD3912W3915 2 RD3915 2 RD3915W3918 2 RD3918 2 RD3918W3921 2 RD3921 2 RD3921W3924 2 RD3924 2 RD3924W3927 2 RD3927 2 RD3927W3930 2 RD3930 2 RD3930W3936 2 RD3936 2 RD3936W3939 2 RD3939 2 RD3939W3942 2 RD3942 2 RD3942W4212 2 RD2112 2 RD2112W4215 2 RD2115 2 RD2115W4218 2 RD2118 2 RD2118W4221 2 RD2121 2 RD2121W4224 2 RD2124 2 RD2124W4227 2 RD2127 2 RD2127W4230 2 RD2130 2 RD2130W4236 2 RD2136 2 RD2136W4239 2 RD2139 2 RD2139W4242 2 RD2142 2 RD2142W4512 2 RD4512 2 RD4512W4515 2 RD4515 2 RD4515W4518 2 RD4518 2 RD4518W4524 2 RD4524 2 RD4524W4530 2 RD4530 2 RD4530W4812 2 RD2412 2 RD2412W4815 2 RD2415 2 RD2415W4818 2 RD2418 2 RD2418W4824 2 RD2424 2 RD2424W4830 2 RD2430 2 RD2430W930 1 RD0930 1 RD0930W936 1 RD0936 1 RD0936W939 1 RD0939 1 RD0939W942 1 RD0942 1 RD0942WA2430 1 RD1530 1 RD3330WA2436 1 RD1536 1 RD3336WA2439 1 RD1539 1 RD3339WA2442 1 RD1542 1 RD3342WA2730 1 RD1530 1 RD3330WA2736 1 RD1536 1 RD3336WA2739 1 RD1539 1 RD3339WA2742 1 RD1542 1 RD3342WBC2730 1 RDWBC2430 1 RDWBC2430WBC2736 1 RDWBC2436 1 RDWBC2436WBC2739 1 RDWBC2439 1 RDWBC2439WBC2742 1 RDWBC2442 1 RDWBC2442WBC3024 1 RDWBC2724 1 RDWBC2724WBC3030 1 RDWBC2730 1 RDWBC2730WBC3036 1 RDWBC2736 1 RDWBC2736WBC3039 1 RDWBC2739 1 RDWBC2739WBC3042 1 RDWBC2742 1 RDWBC2742WBC3330 1 RD3330 1 RD3330WBC3336 1 RD3336 1 RD3336WBC3339 1 RD3339 1 RD3339WBC3342 1 RD3342 1 RD3342WBC3630 1 RD3930 1 RD3930WBC3924 1 RD4524 1 RD4524WBC3930 1 RD4530 1 RD4530WBC3936 1 RD4536 1 RD4536WBC3939 1 RD4539 1 RD4539WBC3942 1 RD4542 1 RD4542WBC4530 1 RD1530 1 RD1530 1 RDWBC2730 1 RDWBC2730WBC5130 1 RD1830 1 RD1830 1 RD3330 1 RD3330WCA1230 1 RD3330 1 RD3330WCA1236 1 RD3336 1 RD3336WCA1239 1 RD3339 1 RD3339WCA1242 1 RD3342 1 RD3342
WEC1230 2 RD0930 2 RD0930WEC1236 2 RD0936 2 RD0936WEC1239 2 RD0939 2 RD0939WEC1242 2 RD0942 2 RD0942WEZR2430 1 RDWEZR2430 1 RDWEZR2430WEZR2436 1 RDWEZR2436 1 RDWEZR2436WEZR2439 1 RDWEZR2439 1 RDWEZR2439WEZR2442 1 RDWEZR2442 1 RDWEZR2442WMC27_36 2 RD2715 2 RD2715WMC27_45 2 RD2724 2 RD2724WMC30_36 2 RD3015 2 RD3015WMC30_45 2 RD3024 2 RD3024WMSC24_36 2 RDB2415 2 RDB2415WMSC27_30 2 RD2712 2 RD2712WMSC27_36 2 RD2715 2 RD2715WMSC27_42 2 RD2718 2 RD2718WR3012BUTT 2 RD3012 2 RD3012WR3015BUTT 2 RD3015 2 RD3015WR3018BUTT 2 RD3018 2 RD3018WR3312BUTT 2 RDB3312 2 RDB3312WR3315BUTT 2 RDB3315 2 RDB3315WR3318BUTT 2 RDB3318 2 RDB3318WR3612BUTT 2 RD3612 2 RD3612WR3615BUTT 2 RD3615 2 RD3615WR3618BUTT 2 RD3618 2 RD3618WR3624BUTT 2 RD3624 2 RD3624WR3627BUTT 2 RD3627 2 RD3627WR3912 2 RD1812 2 RD1812WR3915 2 RD3915 2 RD3915WR3918 2 RD3918 2 RD3918WR3924 2 RD3924 2 RD3924WR3927 2 RD3927 2 RD3927WR4212 2 RD2112 2 RD2112WR4218 2 RD2118 2 RD2118WR4224 2 RD2124 2 RD2124
Repl
acem
ent P
arts
Door & Drawer FrontsM20
Door Style Index
Code Door Style Overlay
AF6C1 Ambridge Cherry FullAF6M1 Ambridge Maple FullAF5C1 Bellwether Cherry FullAF5M1 Bellwether Maple FullAF7C1 Chesterhill Cherry FullAF7M1 Chesterhill Maple FullAF3C1 Flaxton Cherry FullAF3M1 Flaxton Maple FullAE7C1 Fox Pointe Cherry FullAE7M1 Fox Pointe Maple FullAF1C1 Glenmoor Cherry PartialAF1M1 Glenmoor Maple PartialAF1O1 Glenmoor Oak PartialAF2C1 Rexton Cherry FullAF2M1 Rexton Maple FullAE6C1 Talmadge Cherry FullAE6M1 Talmadge Maple FullAE6O1 Talmadge Oak Full
Replacement Parts
Door & Drawer Fronts - Sizes M21
PART Full Overlay Partial Overlay
RDB2463•B 11 3/4 x 61 1/8 11 1/16 x 60 1/2
RD3663•B 17 3/4 x 61 1/8 17 1/16 x 60 1/2
RD3063•B 14 3/4 x 61 1/8 14 1/16 x 60 1/2
RD2463•B 23 5/8 x 61 1/8 22 1/4 x 60 1/2
RD1863•B 17 5/8 x 61 1/8 16 1/4 x 60 1/2
RD1563•B 14 5/8 x 61 1/8 13 1/4 x 60 1/2
RD0956•B N/A 8 5/8 x 55 5/8
RD1848•B or •W 17 5/8 x 47 1/4 16 1/4 x 46
RDWEZR2442S 10 15/16 x 41 1/4 10 1/4 x 40
RDWBC2742 13 1/8 x 41 1/4 11 3/4 x 40
RDWBC2442 10 1/8 x 41 1/4 8 3/4 x 40
RDB3342•B or •W 16 1/4 x 41 1/4 15 9/16 x 40
RDB2442•B or •W 11 3/4 x 41 1/4 11 1/16 x 40
RD4542•B or •W 22 1/8 x 41 1/4 20 3/4 x 40
RD3942•B or •W 19 1/8 x 41 1/4 17 3/4 x 40
RD3642•B or •W 17 3/4 x 41 1/4 17 1/16 x 40
RD3342•B or •W 16 1/8 x 41 1/4 14 3/4 x 40
RD3042•B or •W 14 3/4 x 41 1/4 14 1/16 x 40
RD2742•B or •W 13 1/4 x 41 1/4 12 9/16 x 40
RD2442•B or •W 23 5/8 x 41 1/4 22 1/4 x 40
RD2142•B or •W 20 5/8 x 41 1/4 19 1/4 x 40
RD1842•B or •W 17 5/8 x 41 1/4 16 1/4 x 40
RD1542•B or •W 14 5/8 x 41 1/4 13 1/4 x 40
RD1242•B or •W 11 5/8 x 41 1/4 10 1/4 x 40
RD0942•B or •W 8 5/8 x 41 1/4 7 1/4 x 40
SIncludes 2 doors hinged together — size listed is for one door
RDWEZR2439S 10 15/16 x 38 1/4 10 1/4 x 37
RDWBC2739 13 1/8 x 38 1/4 11 3/4 x 37
RDWBC2439 10 1/8 x 38 1/4 8 3/4 x 37
RDB3339•B or •W 16 1/4 x 38 1/4 15 9/16 x 37
RDB2439•B or •W 11 3/4 x 38 1/4 11 1/16 x 37
RD4539•B or •W 22 1/8 x 38 1/4 20 3/4 x 37
RD3939•B or •W 19 1/8 x 38 1/4 17 3/4 x 37
RD3639•B or •W 17 3/4 x 38 1/4 17 1/16 x 37
RD3339•B or •W 16 1/8 x 38 1/4 14 3/4 x 37
RD3039•B or •W 14 3/4 x 38 1/4 14 1/16 x 37
RD2739•B or •W 13 1/4 x 38 1/4 12 9/16 x 37
RD2439•B or •W 23 5/8 x 38 1/4 22 1/4 x 37
RD2139•B or •W 20 5/8 x 38 1/4 19 1/4 x 37
RD1839•B or •W 17 5/8 x 38 1/4 16 1/4 x 37
RD1539•B or •W 14 5/8 x 38 1/4 13 1/4 x 37
RD1239•B or •W 11 5/8 x 38 1/4 10 1/4 x 37
RD0939•B or •W 8 5/8 x 38 1/4 7 1/4 x 37
SIncludes 2 doors hinged together — size listed is for one door
RD3638•B or •W 17 3/4 x 17 1/4 N/A
RDWEZR2436S 10 15/16 x 35 1/4 10 1/4 x 34
RDWBC2736 13 1/8 x 35 1/4 11 3/4 x 34
RDWBC2436 10 1/8 x 35 1/4 8 3/4 x 34
RDB3336•B or •W 16 1/4 x 35 1/4 15 9/16 x 34
RDB2436•B or •W 11 3/4 x 35 1/4 11 1/16 x 34
RD4536•B or •W 22 1/8 x 35 1/4 20 3/4 x 34
RD3936•B or •W 19 1/8 x 35 1/4 17 3/4 x 34
RD3636•B or •W 17 3/4 x 35 1/4 17 1/16 x 34
Door & Drawer Fronts - SizesM22
Repl
acem
ent P
arts
Door & Drawer Fronts - Sizes
RD3336 16 1/8 x 35 1/4 14 3/4 x 34
RD3036•B or •W 14 3/4 x 35 1/4 14 1/16 x 34
RD2736•B or •W 13 1/4 x 35 1/4 12 9/16 x 34
RD2436•B or •W 23 5/8 x 35 1/4 22 1/4 x 34
RD2136•B or •W 20 5/8 x 35 1/4 19 1/4 x 34
RD1836•B or •W 17 5/8 x 35 1/4 16 1/4 x 34
RD1536•B or •W 14 5/8 x 35 1/4 13 1/4 x 34
RD1236•B or •W 11 5/8 x 35 1/4 10 1/4 x 34
RD0936•B or •W 8 5/8 x 35 1/4 7 1/4 x 34
SIncludes 2 doors hinged together — size listed is for one door
RDWEZR2430S 10 15/16 x 29 1/4 10 1/4 x 28
RDWBC2730 13 1/8 x 29 1/4 11 3/4 x 28
RDWBC2430 10 1/8 x 29 1/4 8 3/4 x 28
RDBPP0930•B 8 5/8 x 29 1/4 7 1/4 x 28
RDBCA2430•B or •W 16 15/32 x 29 1/4 15 25/32 x 28
RDB3330•B or •W 16 1/4 x 29 1/4 15 9/16 x 28
RDB2430•B or •W 11 3/4 x 29 1/4 11 1/16 x 28
RD4530•B or •W 22 1/8 x 29 1/4 20 3/4 x 28
RD3930•B or •W 19 1/8 x 29 1/4 17 3/4 x 28
RD3630•B or •W 17 3/4 x 29 1/4 17 1/16 x 28
RD3330•B or •W 16 1/8 x 29 1/4 14 3/4 x 28
RD3030•B or •W 14 3/4 x 29 1/4 14 1/16 x 28
RD2730•B or •W 13 1/4 x 29 1/4 12 9/16 x 28
RD2430•B or •W 23 5/8 x 29 1/4 22 1/4 x 28
RD2130•B or •W 20 5/8 x 29 1/4 19 1/4 x 28
RD1830•B or •W 17 5/8 x 29 1/4 16 1/4 x 28
RD1530•B or •W 14 5/8 x 29 1/4 13 1/4 x 28
RD1430•B or •W 14 x 29 1/4 12 5/8 x 28
RD1230•B or •W 11 5/8 x 29 1/4 10 1/4 x 28
RD0930•B or •W 8 5/8 x 29 1/4 7 1/4 x 28
SIncludes 2 doors hinged together — size listed is for one door
RDEZR3627•B 10 15/16 x 26 1/4 10 1/4 x 25
RDB3327•B or •W 16 1/4 x 26 1/4 15 9/16 x 25
RDB2427•B or •W 11 3/4 x 26 1/4 11 1/16 x 25
RD4527•B or •W 22 1/8 x 26 1/4 20 3/4 x 25
RD3927•B or •W 19 1/8 x 26 1/4 17 3/4 x 25
RD3627•B or •W 17 3/4 x 26 1/4 17 1/16 x 25
RD3027•B or •W 14 3/4 x 26 1/4 14 1/16 x 25
RD2727•B or •W 13 1/4 x 26 1/4 12 9/16 x 25
RD2427•B or •W 23 5/8 x 26 1/4 22 1/4 x 25
RD2127•B or •W 20 5/8 x 26 1/4 19 1/4 x 25
RD1827•B or •W 17 5/8 x 26 1/4 16 1/4 x 25
RD1527•B or •W 14 5/8 x 26 1/4 13 1/4 x 25
RD1427•B or •W 14 x 26 1/4 12 5/8 x 25
RD1227•B or •W 11 5/8 x 26 1/4 10 1/4 x 25
RD0927•B or •W 8 5/8 x 26 1/4 7 1/4 x 25
RDWBC2724 13 1/8 x 22 3/4 11 3/4 x 21 1/2
RDSFA4224•B 23 1/8 x 22 3/4 23 1/4 x 21 1/2
RDSFA3924•B 18 7/8 x 22 3/4 19 x 21 1/2
RDBWBT1824•B 17 5/8 x 22 3/4 16 1/4 x 21 1/2
RDBWBT1524•B 14 5/8 x 22 3/4 13 1/4 x 21 1/2
RDBBC3924•B 13 1/8 x 22 3/4 11 3/4 x 21 1/2
RDBBC3624•B 10 1/8 x 22 3/4 8 3/4 x 21 1/2
RDB3324•B or •W 16 1/4 x 22 3/4 15 9/16 x 21 1/2
RDB2424•B or •W 11 3/4 x 22 3/4 11 1/16 x 21 1/2
PART Full Overlay Partial Overlay
Replacement Parts
Door & Drawer Fronts - Sizes M23
RD4524•B or •W 22 1/8 x 22 3/4 20 3/4 x 21 1/2
RD3924•B or •W 19 1/8 x 22 3/4 17 3/4 x 21 1/2
RD3624•B or •W 17 3/4 x 22 3/4 17 1/16 x 21 1/2
RD3324•B or •W 16 1/8 x 22 3/4 14 3/4 x 21 1/2
RD3024•B or •W 14 3/4 x 22 3/4 14 1/16 x 21 1/2
RD2724•B or •W 13 1/4 x 22 3/4 12 9/16 x 21 1/2
RD2424•B or •W 23 5/8 x 22 3/4 22 1/4 x 21 1/2
RD2124•B or •W 20 5/8 x 22 3/4 19 1/4 x 21 1/2
RD1924•B or •W 20 x 22 3/4 18 5/8 x 21 1/2
RD1824•B or •W 17 5/8 x 22 3/4 16 1/4 x 21 1/2
RD1524•B or •W 14 5/8 x 22 3/4 13 1/4 x 21 1/2
RD1424•B or •W 14 x 22 3/4 12 5/8 x 21 1/2
RD1224•B or •W 11 5/8 x 22 3/4 10 1/4 x 21 1/2
RDB3321•B or •W 16 1/4 x 19 3/4 15 9/16 x 18 1/2
RDB2421•B or •W 11 3/4 x 19 3/4 11 1/16 x 18 1/2
RD3921•B or •W 19 1/8 x 19 3/4 17 3/4 x 18 1/2
RD3621•B or •W 17 3/4 x 19 3/4 17 1/16 x 18 1/2
RD3321•B or •W 16 1/8 x 19 3/4 14 3/4 x 18 1/2
RD3021•B or •W 14 3/4 x 19 3/4 14 1/16 x 18 1/2
RD2721•B or •W 13 1/4 x 19 3/4 12 9/16 x 18 1/2
RD2421•B or •W 23 5/8 x 19 3/4 22 1/4 x 18 1/2
RD2121•B or •W 20 5/8 x 19 3/4 19 1/4 x 18 1/2
RD1921•B or •W 20 x 19 3/4 18 5/8 x 18 1/2
RD1821•B or •W 17 5/8 x 19 3/4 16 1/4 x 18 1/2
RD1521•B or •W 14 5/8 x 19 3/4 13 1/4 x 18 1/2
RD1421•B or •W 14 x 19 3/4 12 5/8 x 18 1/2
RD1221•B or •W 11 5/8 x 19 3/4 10 1/4 x 18 1/2
RDB3318•B or •W 16 1/4 x 17 1/4 15 9/16 x 16
RDB2418•B or •W 11 3/4 x 17 1/4 11 1/16 x 16
RD4518•B or •W 22 1/8 x 17 1/4 20 3/4 x 16
RD3918•B or •W 19 1/8 x 17 1/4 17 3/4 x 16
RD3618•B or •W 17 3/4 x 17 1/4 17 1/16 x 16
RD3018•B or •W 14 3/4 x 17 1/4 14 1/16 x 16
RD2718•B or •W 13 1/4 x 17 1/4 12 9/16 x 16
RD2418•B or •W 23 5/8 x 17 1/4 22 1/4 x 16
RD2118•B or •W 20 5/8 x 17 1/4 19 1/4 x 16
RD1818•B or •W 17 5/8 x 17 1/4 16 1/4 x 16
RD1518•B or •W 14 5/8 x 17 1/4 13 1/4 x 16
RDW3616 14 1/2 x 35 5/8 13 1/4 x 34 1/4
RDW3316 14 1/2 x 32 5/8 13 1/4 x 31 1/4
RDW3016 14 1/2 x 29 5/8 13 1/4 x 28 1/4
RDW2716
14 1/2 x 26 5/8 13 1/4 x 25 1/4
RDB3315•B or •W 16 1/4 x 14 1/4 15 9/16 x 13
RDB2415•B or •W 11 3/4 x 14 1/4 11 1/16 x 13
RD4515•B or •W 22 1/8 x 14 1/4 20 3/4 x 13
RD3915•B or •W 19 1/8 x 14 1/4 17 3/4 x 13
RD3615•B or •W 17 3/4 x 14 1/4 N/A
RD3015•B or •W 14 3/4 x 14 1/4 14 1/16 x 13
RD2715•B or •W 13 1/4 x 14 1/4 12 9/16 x 13
RD2415•B or •W 23 5/8 x 14 1/4 22 1/4 x 13
RD2115•B or •W 20 5/8 x 14 1/4 19 1/4 x 13
RDW3615 11 3/16 x 35 5/8 10 3/8 x 34 1/4
RDW3315 11 3/16 x 32 5/8 10 3/8 x 31 1/4
RDW3015 11 3/16 x 29 5/8 10 3/8 x 28 1/4
PART Full Overlay Partial Overlay
Door & Drawer Fronts - SizesM24
Repl
acem
ent P
arts
RDW2715 11 3/16 x 26 5/8 10 3/8 x 25 1/4
RDW2415 11 3/16 x 23 5/8 10 3/8 x 22 1/4
RDW2115 11 3/16 x 20 5/8 10 3/8 x 19 1/4
RDW1815 11 3/16 x 17 5/8 10 3/8 x 16 1/4
RDW1515 11 3/16 x 14 5/8 10 3/8 x 13 1/4
RDW1215 11 3/16 x 11 5/8 10 3/8 x 10 1/4
RDW2414 9 3/4 x 23 5/8 9 x 22 1/4
RDW2413 10 3/4 x 23 5/8 9 x 22 1/4
RDW2113 10 3/4 x 20 5/8 9 x 19 1/4
RDW1813 10 3/4 x 17 5/8 9 x 16 1/4
RDW1513 10 3/4 x 14 5/8 9 x 13 1/4
RDW1213 10 3/4 x 11 5/8 9 x 10 1/4
RDW2412 9 3/4 x 23 5/8 9 x 22 1/4
RDB3312•B or •W 16 1/4 x 11 1/4 15 9/16 x 10
RD4512•B or •W 22 1/8 x 11 1/4 20 3/4 x 10
RD3912•B or •W 19 1/8 x 11 1/4 17 3/4 x 10
RD3612•B or •W 17 3/4 x 11 1/4 N/A
RD3012•B or •W 14 3/4 x 11 1/4 14 1/16 x 10
RD2712•B or •W 13 1/4 x 11 1/4 12 9/16 x 10
RD2412•B or •W 23 5/8 x 11 1/4 22 1/4 x 10
RD2112•B or •W 20 5/8 x 11 1/4 19 1/4 x 10
RD1812•B or •W 17 5/8 x 11 1/4 16 1/4 x 10
RDW2711 9 3/4 x 26 5/8 9 x 25 1/4
RDW2411 9 3/4 x 23 5/8 9 x 22 1/4
RDW2111 9 3/4 x 20 5/8 9 x 19 1/4
RDW1811 9 3/4 x 17 5/8 9 x 16 1/4
RDW1511 9 3/4 x 14 5/8 9 x 13 1/4
RDW1211 9 3/4 x 11 5/8 9 x 10 1/4
RDWVSB6006 6 1/8 x 28 3/8 5 1/2 x 27
RDWSFA4206 6 1/8 x 23 1/8 5 1/2 x 23 1/4
RDWSFA3906 6 1/8 x 18 7/8 5 1/2 x 19
RDWBBC4806 6 1/8 x 22 1/8 N/A
RDWBBC4506 6 1/8 x 19 1/8 5 1/2 x 17 3/4
RDWBBC4206 6 1/8 x 16 1/8 5 1/2 x 14 3/4
RDWBBC3906 6 1/8 x 13 1/8 5 1/2 x 11 3/4
RDWBBC3606 6 1/8 x 10 1/8 5 1/2 x 8 3/4
RDW3606.UT 6 1/8 x 35 5/8 5 1/2 x 34 1/4
RDW3306.UT 6 1/8 x 32 5/8 5 1/2 x 31 1/4
RDW3006.UT 6 1/8 x 29 5/8 5 1/2 x 28 1/4
RDW2406.UBT 6 1/8 x 23 5/8 5 1/2 x 22 1/4
RDW4506 6 1/8 x 22 1/8 5 1/2 x 20 3/4
RDW3906 6 1/8 x 38 5/8 5 1/2 x 37 1/4
RDW3606 6 1/8 x 35 5/8 5 1/2 x 34 1/4
RDW3306 6 1/8 x 32 5/8 5 1/2 x 31 1/4
RDW3006 6 1/8 x 29 5/8 5 1/2 x 28 1/4
RDW2706 6 1/8 x 26 5/8 5 1/2 x 25 1/4
RDW2406 6 1/8 x 23 5/8 5 1/2 x 22 1/4
RDW2106 6 1/8 x 20 5/8 5 1/2 x 19 1/4
RDW2006 6 1/8 x 20 5 1/2 x 18 5/8
RDW1806 6 1/8 x 17 5/8 5 1/2 x 16 1/4
RDW1706 N/A 5 1/2 x 14 3/4
RDW1506 6 1/8 x 14 5/8 5 1/2 x 13 1/4
RDW1206 6 1/8 x 11 5/8 5 1/2 x 10 1/4
PART Full Overlay Partial Overlay
Replacement Parts
Door & Drawer Fronts - Sizes M25
RDW3604 4 1/8 x 35 5/8 3 1/2 x 34 1/4
RDW3004 4 1/8 x 29 5/8 3 1/2 x 28 1/4
RDW2404 4 1/8 x 23 5/8 3 1/2 x 22 1/4
RDW1804 4 1/8 x 17 5/8 3 1/2 x 16 1/4
RDEZR36•BS 10 15/16 x 29 1/4 10 1/4 x 28
RDEZR33•BS 7 15/16 x 29 1/4 7 1/4 x 28
RDDFD24•B or •W 23 5/8 x 17 1/4 22 1/4 x 16
RDDFD21•B or •W 20 5/8 x 17 1/4 19 1/4 x 16
RDDFD18•B or •W 17 5/8 x 17 1/4 16 1/4 x 16
RDDFD15•B or •W 14 5/8 x 17 1/4 13 1/4 x 16
SIncludes 2 doors hinged together — size listed is for one door
PART Full Overlay Partial Overlay
Door & Drawer Fronts - SizesM26
Repl
acem
ent P
arts
Notes
Notes
A1A1A1
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE
N1
1 1BIS1 C10
1BIS2 C10
1DRS.PREP1 C10
1DRS.PREP2 C10
1FWROT C12
1MD.PREP1 C10
1MD.PREP2 C10
1MD1 C10
1MD2 C10
1ROT C11
1SV.PREP1 C10
1SV.PREP2 C10
1SV1 C10
1SV2 C10
2 2BIS1 C10
2BIS2 C10
2DFWROT C13
2DROT C12
2DRS.PREP1 C10
2FWROT C12
2MD.PREP1 C10
2MD.PREP2 C10
2MD1 C10
2MD2 C10
2ROT C11
2SV.PREP1 C10
2SV1 C10
2SV2 C10
3 3ROT C11
4 4BIS1 C10
4DROT C13
4MD1 C10
4ROT C11
4SV1 C10
6 6DROT C13
6ROT C12
A ACM L3
ACPR M2
ACTC M2
AE6C1 A9
AE6M1 A9
AE6O1 A9
AE7C1 A6
AE7M1 A6
AF1C1 A7
AF1M1 A7
AF1O1 A7
AF2C1 A8
AF2M1 A8
AF3C1 A5
AF3M1 A5
AF5C1 A3
AF5M1 A3
AF6C1 A2
AF6M1 A2
AF7C1 A4
AF7M1 A4
AOSC L4
AP C8
APC C8
B B E1, E2, E3, E4, E5, E6, E7
BB E32
BBC E19
BC E32
BCA E23
BCD E8, E9
BCFS E22
BD E9, E10
BEA E23
BEC E23
BEP E33
BEPL K2
BF E31, G11
BFC E33
BFF E32, G11
BFOL E32
BFP3 E24
BFP6 E24
BMC E17
BOCU E16
BOX M9, M10
BPP E24
BPPS E9
BS K4
BWBFMK E26
BWBT E24, E25
C CBB L8
CCK M2
CCM L3
CCM8 L3
CDK E29
CFO C9
CGPB K2
CM L3
CR L5
CTC L3
CTS L1
CTWE L5
D DDO H1
DDR H1
DEP H3
DFD H2
DIP E16
DKD H2
DKDT H2
DM L9
DMTB E28
DOKN E29
DOKW E29
DOS D21
DPK E28
DPR F5
DROT K7
DROTFX K7
DRPD C9
DSB E13
DWP E17
DWTEP F7
E ECB L11
EDB25 M2
EFT L11
ELB L11
F FADBK M1
FBRK18 E27
FE3 D24
FEP I1, I2
FS I2, M4
FSTB I3
FTBV I3
G GDRS M10
GR L9
H HDFXSCDC M6
HK02 L15
HK 110 L16
HK107 L15
HK108 L16
HK109 L16
HK111 L16
HK117 L16
HK119 L17
HK120 L17
HK123 L17
HK125 L18
HK126 L18
HK127 L18
HK128 L18
HK137 L18
HK138 L19
HK150 L19
HK152 L19
HK155 L20
HK157 L20
HK158 L21
HK161 L21
HK162 L21
HP103 L15
HP106 L15
HP112 L16
HP118 L17
HP124 L17
HP131 L18
HP135 L18
HP139 L19
HP140 L19
HP151 L19
HP153 L20
HP154 L20
HP156 L20
HP159 L21
HP160 L21
HP163 L22
HP164 L22
HP165 L22
HP166 L22
HSD E31
HTK M1
I ICM L4
ID C9
ILR L5
L LM L6
LS E21
LSA E22
LSK45 E26
LSK48 E26
LSTR L4
LW D15
M MBEP E33
MC G9
MDEP H3
MI C8
MM L6
MTEP F7
MTK E30
MVEP G11
N NBM L5
O O H3
OC F3
OCO D23
OCSP F6
ODK F4
OSC L4
P PB E7, E8
PBBC E19, E20
PBS K4
PC F2
PCSK F5
PDO E30
PE C7
PEB C7
PFXSCDR18 M6
PFXSCDR21 M6
PFXSCDR24 M6
PFXSCDRPB24 M6
PFXSMBBK21 M5
PFXSMBBK24 M5
PH2PO M8
PH4FO M8
PH6FO M8
PH6PO M8
PHDFXSCDR24 M6
Nom
enclature Index
Nomenclaure Index
N2
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE
PHDFXSCRMB M7
PHFM M7
PHUTK M9
PSMROTR18 M5
PSMROTR21 M5
PSMROTR24 M5
PSMROTRPB24 M5
PSP6X6 L14
PWAS K4
PWS K4
Q QCTC M3
QP M3
QR L7
QST M3
QSTGL M3
R RCM L5
RD C9
RH170EZ M7
RHF D18
RHBF M7
RHP M9
RM L9
ROT K6
ROTW K7
RSF E15
RSP L14
S SB E10, E11, E12
SBA E13
SBP L8
SBRE L6
SCM L3
SCV L7
SDC D20
SDIK15 E29
SDIK18 E29
SDIK21 E29
SDIK24 E29
SF E14
SFA E14
SFAF E31
SFF E31
SHO L8
SK K3
SM L7
SP L14
SPM L7
SPR F5
STB E28
STR8 L4
SWEOS D13
SWS4 L10
SWS6 L10
SWS8 L10
T TBB L8
TBE L6
TBP L8
TCB L12
TEP F7
TF F6
TFF F6
TFOL F6
TFT L12
TIM L9
TKBK E30
TLB L12
TP M4
TPL L13
TS D20
TUK M3
TV G9
U U F1, F2
UAP E15
UB J1, J2, J3, J4, J5, J6
UBD J6
UBSF J6
UBT J3, J4
UCM L6
ULS J6
UMTK J7
URSF J7
USFCK J7
UST E27
UTK12 E30
UTK22 E30
UWMTK J7
V V L1
VB G5, G6
VBD G7
VCD G3, G4
VF G10
VFF G10
VHRO18 G10
VLC G7, G8
VS K5
VS24/3630 K5
VS2407 K5
VSB G1, G2, G3
VSK K1
VW G8
VWB G8
W WAS K4
WCA D13
WCAS K4
WCB L13
WCD D15
WDFT L13
WDLB L13
WEC D13
WECS K4
WEZR K4
WF D24
WHCC362442P D18
WHCV362442 D19
WMC D16
WMS D17
WMSC D17
WMSCS K4
WMSSS K4
WMTK E30
WOC D14
WRM L9
WS K4
WSK K1
WSM L7
WTDK E27
WWRS D15
Nom
encl
atur
e In
dex
Nomenclature Index
KraftMaidONE® Cabinetry 25 Year Limited Warranty.
KraftMaid® Cabinetry is proud to have earned the KCMA Certification Seal for all door styles.
KraftMaid cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86.
KraftMaid cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA.
All KraftMaid facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
KraftMaid® Cabinetry took on 13 tough KCMA tests and passed them all...Beautifully!
• Shelves and bottoms are loaded at 15 pounds per square foot to ensure no excessive deflection or visible sign of joint separation or failure.
• Mounted wall cabinets are loaded to ensure that the cabinet will accept net loading in compliance with ANSI A161.1–2000 requirements.
• A load of up to 250 pounds is applied against the inside of cabinet fronts to ensure reliable front joints.
• A 3 pound steel ball is “drop tested” against shelves, cabinet bottoms and drawer bottoms to ensure cabinets will withstand dropping of cans and other items.
• Cabinets are impact tested by striking the center of a closed and open door with a 10 pound sand bag.
• Cabinet doors are weighted with 65 pounds and operated 10 times to test the ability of the door and hinges to withstand loading.
• Doors are opened and closed for 25,000 cycles to ensure durability under the stress of normal usage.
• Drawers and drawer mechanisms are tested at 15 pounds per square foot and operated through 25,000 opening and closing cycles to assure durability.
• A 3 pound weight is dropped 10 times against drawer assembly to ensure that drawer front assembly will withstand the impact of closing.
• Cabinets are hot box tested at temperatures up to 120˚F to ensure finish will withstand high heat.
• Cabinets are cycle tested at temperatures ranging from -5˚F to + 120˚F to ensure finish will withstand temperature changes.
• A 24–hour soap and water solution test checks finish ability to withstand exposure to detergents and moisture.
• Finish is exposed to vinegar, grape juice, olive oil, lemon juice, 100 proof alcohol and more to ensure no appreciable discoloration, stain or whitening of the finish.
WARNING: KraftMaid cabinetry product contains chemicals known to the State of California to cause cancer.
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
Masco Cabinetry LLC warrants to the original consumer purchaser that our KraftMaidONE® cabinetry will be free from defects in material and workmanship under normal use for a period of TWENTY-FIVE (25) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.
Masco Cabinetry LLC may elect to repair or replace any defective KraftMaidONE® product covered by our warranty.
THIS WARRANTY DOES NOT COVER:
• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation, storage or handling.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.
Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Limited Lifetime Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.
From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is only valid in the United States of America. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain performance under this warranty, you must contact your KraftMaidONE® supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Masco Cabinetry LLC, Warranty Department, P.O. Box 1055, Middlefield, Ohio 44062
©2015 Masco Cabinetry LLC. Printed in the USA R 11/15
KraftM
aidON
E® S
pecifications Book
SPECIFICATIONS BOOK2016
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12
KM1-TMSC1115
20
16