specification guide serpentine 60 - lightforms.com · serpentine 60 spt60 | suspended, surface lens...
TRANSCRIPT
FEATURES
Photometry and additional documentation at: LightForms.com/SPT60
Serpentine 60 – SPT60 LED — 62 x 73 mm
Individual Fixture, Continuous Run or Custom Configuration
Direct/Indirect, Direct or Indirect Distribution
Up to 6044 lm/Mand 117 lm/W
Four Standard Output Options
Tunable White and RGB+W Options
Integral DALI, DMX, 10V or Phase Driver
Dimming Down to 0%
Integral Downlight Spot Options
Integral Sensor Options
White, Black, Bronze or Custom RAL Finish
Custom shapes available, contact factory
SUSPENDED
SPECIFICATION GUIDE
Exceptions may apply. Enquire for more details.
SURFACE
© 2019 Light Forms Ltd.
1. BASE MODEL / MOUNTING Select ONE
SPT60SSPT60SM
SuspendedSurface (direct only)
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice. 2
INSTRUCTIONS Digital users: Check selection boxes and fill in fields directly in fillable,interactive PDF, save file, submit to Light Forms. Manual users: Check selection boxes and fill in fields with pen, scan and save ALL pages as PDF document, submit to Light Forms.
Serpentine 60SPT60 | Suspended, Surface
2. SIZE* Select length / radius and enter required quantity
*All sizes shown are in millimetres.
STRAIGHT SECTIONS
1/8 CIRCLE
R300
R QTY
R400R475R575R650R750R825R925
239
L
309377477518588659729
R1000R1100R1200
800870940
R1300
R QTY
R1375R1450R1550R1650R1750R1825R1900
1010
L
1081115112221291136314321503
R2000R2100R2175
157216431713
R2275
R QTY
R2350R2450R2550R2625R2700R2800R2900
1784
L
1854192419942065213522052275
R3000R3075
23462416
L QTY
141212281352422493561632702773842
913
L QTY
983105411221193126313341403147415441615
1683
L QTY
1754182418951964203521052176224423152385
L
R
L
45°
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice. 3
INSTRUCTIONS Digital users: Check selection boxes and fill in fields directly in fillable,interactive PDF, save file, submit to Light Forms. Manual users: Check selection boxes and fill in fields with pen, scan and save ALL pages as PDF document, submit to Light Forms.
Serpentine 60SPT60 | Suspended, Surface
*All sizes shown are in millimetres.
1/4 CIRCLE
R
L
90°
R300
R QTY
R400R475R575R650R750
478
L
61975489410351175
R825
R QTY
R925R1000R1100R1200R1300
1318
L
14581599173918002020
R1375
R QTY
R1450R1550R1650
2161
L
230124442582
R
L
180°
1/2 CIRCLE
R300
R QTY
R400R475R575
955
L
123815081788
R650
R QTY
R750R825R925
2070
L
235026362915
R1000
R QTY
R1100R1200
3198
L
34783760
A
B
120°
CROSSING
243
A QTY
281
B
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice. 4
Select when specifying a DIRECT-ONLY fixture; indirect not available for surface mount
8090
CRI
Diffuse (std.)DIFFPRS
LENS
*For TUNE/LOW and TUNE/MED, CRI and CCT do not apply (leave unchecked).^For RGBW, CRI does not apply (leave unchecked) and select 3000K or 4000K CCT only. White LEDs can remain uncommissioned for RGB-only output.
4. INDIRECT LINEAR LAMPING & LENS Select NONE or ONE from each category (note exceptions below)
NONE
MINLOWMED#
TUNE/LOW*TUNE/MED*RGBW^
OUTPUT CCT
2700K3000K3500K4000K 5000K6500K
Select when specifying an INDIRECT-ONLY fixture
8090
CRI
Diffuse (std.) DIFFPRS
LENS
#UGR19 is a low glare, UGR<19 optics package with low output and prismatic lens. LENS does not apply (leave unchecked). *For TUNE/LOW and TUNE/MED, CRI and CCT do not apply (leave unchecked).^For RGBW, CRI does not apply (leave unchecked) and select 3000K or 4000K CCT only. White LEDs can remain uncommissioned for RGB-only output.
3. DIRECT LINEAR LAMPING & LENS Select NONE or ONE from each category (note exceptions below)
NONE
MINLOWMED#
TUNE/LOW*TUNE/MED*RGBW^
OUTPUT CCT
2700K3000K4000K 5000K6500K
Serpentine 60SPT60 | Suspended, Surface
Clear Prismatic
Clear Prismatic
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice.
7. FINISH* Select ONE
White powdercoat (standard) Black powdercoat Metallic bronze powdercoatCustom RAL# colour powdercoat, ex: RAL/3000
WH BLKBZ RAL/ _ _ _ _
*Contact factory for additional finish options including Interpon, Farrow & Ball and silver and gold plating # See RAL colour options and codes at lightforms.com/RAL
6. INTEGRAL DRIVER* Select ONE
Non-dimming DALI driver, dimming down to 1% 1-10V, dimming down to 1% 0-10V, dimming down to 0%DMX driver, dimming down to 1%For use with phase-cut triac, IGBT or sine wave dimmer switches
NONDIMDALI#
1/10V0/10VDMX^
PHASE
*Driver selection applies to direct, indirect and/or downlight spots. Contact Light Forms if separate driver types for each are required. #DALI is required for use with TUNE/LOW and TUNE/MED; DALI (or DMX) is required for RGBW^DMX (or DALI) is required for use with RGBW
Serpentine 60 SPT60 | Suspended, Surface
CCT
2700K3000K4000K
MIN/SLOW/STUNE/S# RGB/S#
8090
CRI
15 15˚ spread25 25˚ spread40 40˚ spread
BEAM DEGREE
5. DOWNLIGHT SPOTS* Select NONE or ONE from EVERY category (note exceptions below)
Select when specifying linear lamping only
*Contact Light Forms for desired spacing of spots within the fixture #For TUNE/S and RGB/S, CRI and CCT do not apply (leave unchecked)
NONE
OUTPUTQUANTITY*
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice. 6
10. OPTIONAL ADD-ONS Select as many as apply
EMEM/DALIEC
A. EMERGENCY
B. SENSOR
PRESDALI/PRESPHOTO
Integral, 3-hour emergency battery, manual testing Integral, 3-hour emergency battery with DALI interface, automatic testingEmergency circuit
Integral, PIR presence detectorIntegral, DALI-compatible PIR presence detectorIntegral, photocell/daylight detector
C. WIRELESS CONTROL
OLP* Integral, Osram Lightify Pro wireless control module
*Must choose DALI option in DRIVER section.
8. POWERFEED COLOUR Select ONE
Grey (standard for suspended, default for other mountings) White BlackTransparent Custom colour (contact Light Forms for options)
GP WPBP TP XP
9. CANOPY Select ONE
Select NONE when specifying wall or surface mount 115mm canopy for each separate powerfeed and suspension point (standard)82mm canopy for each separate powerfeed and suspension point115mm combo canopy for locations with both a powerfeed and suspension point
NONE STD SMALLCOMBO
Serpentine 60SPT60 | Suspended, Surface
DIMENSIONS
DISTRIBUTION
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice. 7
80mm
62mm
180° 165°150°
135°
120°
105°
90°
75°
60°
45°
30°15°0°15°
30°
45°
60°
75°
90°
105°
120°
135°
150°165° 180° 165°
150°
135°
120°
105°
90°
75°
60°
45°
30°15°0°15°
30°
45°
60°
75°
90°
105°
120°
135°
150°165° 180° 165°
150°
135°
120°
105°
90°
75°
60°
45°
30°15°0°15°
30°
45°
60°
75°
90°
105°
120°
135°
150°165°
Serpentine 60SPT60 | Suspended, Surface
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice.
OUTPUTOPTIONS
DELIVERED LUMENS*
LM/M
WATTS*
W/M
EFFICACY*
LM/W
CRIOPTIONS
CCTOPTIONS
LENS OPTIONS
MIN# 1145 11.4 100
8090
2700K3000K4000K5000K6500K
DIFFPRS
LOW# 1443 13.8 105
MED# 2879 25.9 111
TUNE/LOW#^Tunable White Low
117714 84 80 2700K-6500K
TUNE/MED#^Tunable White Medium
166822 76 80 2700K-6500K
RGBW
Colour-Changing RGB+White
N/A
(entire system)
346(white only)
19.2(entire system)
9(white only)
N/A(entire system)
38(white only)
N/A(entire system)
80(white only)
3000K4000K
(white only)
DIRECT LINEAR LAMPING – OPTIONS & PERFORMANCE DATA*
8
Serpentine 60SPT60 | Suspended, Surface
L80 > 50,000 hoursLuminous flux +/- 5% *Data provided is for one direct OR one indirect channel. Add and divide output numbers to calculate direct/indirect performance values. #Performance data is based on a connected-load photometric test of MED output with 80 CRI at 4000K using a DALI driver and DIFF/F lens. Data values for all other outputs are extrapolations.^Performance data is extrapolated based on a 4000K setting. Cooler and warmer CCT settings will provide a slight decrease in performance – lower lm/m, higher W/m, and lower lm/W.
LENS OPTIONS DIFF is a white satin diffuser lens that produces smooth, even light across the lens surface. PRS is a satin prismatic lens covered with microprisms, that produces even ligh and lower UGR levels.
Diffuse DIFF
PrismaticPRS
[email protected] ‧ [email protected] ‧ [email protected]
© 2019 Light Forms Ltd. Specifications subject to change without notice.
OUTPUTOPTIONS
DELIVERED LUMENS*
LM/M
WATTS*
W/M
EFFICACY*
LM/W
CRIOPTIONS
CCTOPTIONS
LENS OPTIONS
MIN# 1259 11.4 87
8090
2700K3000K4000K5000K6500K
DIFFPRS
LOW# 1587 13.8 112
MED# 3165 25.9 104
TUNE/LOW#^Tunable White Low
1294(at 4000K)
14 93 80 2700K-6500K
TUNE/MED#^Tunable White Medium
1834(at 4000K)
22 83 80 2700K-6500K
RGBW
Colour-Changing RGB+White
N/A
(entire system)
380(white only)
19.2(entire system)
9(white only)
N/A(entire system)
42(white only)
N/A(entire system)
80(white only)
3000K4000K
(white only)
INDIRECT LINEAR LAMPING – OPTIONS & PERFORMANCE DATA*
9
L80 > 50,000 hoursLuminous flux +/- 5% *Data provided is for the indirect channel. Add and divide output numbers as necessary from both direct and indirect charts to calculate direct/indirect performance values.#Performance data is based on a connected-load photometric test of MED output with 80 CRI at 4000K using a DALI driver and DIFF lens. Data values for all other outputs are extrapolations.^Performance data is extrapolated based on a 4000K setting. Cooler and warmer CCT setttings will provide a slight decrease in performance – lower lm/m, higher W/m, and lower lm/W.
Serpentine 60 SPT60 | Suspended, Surface
LENS OPTIONS DIFF is a white satin diffuser lens that produces smooth, even light across the lens surface. PRS is a satin prismatic lens covered with microprisms, that produces even ligh and lower UGR levels.
Diffuse DIFF
PrismaticPRS
Serpentine 60 SPT60 | Suspended, Surface
© 2019 Light Forms Ltd. Specifications subject to change without notice.
[email protected] ‧ [email protected] ‧ [email protected] 10
OUTPUTOPTIONS
DELIVERED LUMENS
LM/M
WATTS
W/M
EFFICACY
LM/W
CRIOPTIONS
CCTOPTIONS
BEAM DEGREEOPTIONS
MIN/S# 1101 11.6 95 8090
2700K3000K4000K
152540
LOW/S# 1430 15.9 90
TUNE/S Contact Light Forms for Options & Details
RGB/S Contact Light Forms for Options & Details
DOWNLIGHT SPOTS – OPTIONS & PERFORMANCE DATA*
L80 > 50,000 hoursLuminous flux +/- 5%#Performance calculations are based on connected-load photometric tests with 80 CRI at 4000K and 40˚ beam spread.
SPOTS
Minimum MIN/S
Tunable White TUNE/S
RGB RGB/S
Low LOW/S
Contact Light Forms for Optionsand Details
Contact Light Forms for Optionsand Details
SPECIFICATION DETAILS
HOUSING 100% recyclable, extruded architectural grade aluminium with minimum 2mm thickness.
FINISH OPTIONSStandard finish is textured White powdercoat. Black, Bronze or custom RAL powdercoat options are also specifiable. Contact Light Forms for other finish options (Interpon, Farrow & Ball and silver and gold plating).
SUSPENSION MOUNT CANOPY OPTIONSStandard (STD) comprises separate 115 mm powerfeed canopy and cable bullet at powerfeed locations. SMALL comprises separate 85 mm powerfeed canopy and cable bullet at powerfeed locations. COMBO comprises combined 115mm canopy (canopy and cable bullet) at powerfeed locations. All options include cable bullets for non-powerfeed locations.
Black BLK
Standard STD
Small SMALL
Combo COMBO
Custom RAL RAL
Bronze BZ
View all RAL colour options at: https://lightforms.com/RAL
[email protected] ‧ [email protected] ‧ [email protected] 11© 2019 Light Forms Ltd.
Specifications subject to change without notice.
WEIGHTApproximately 2380 grams per linear metre. Weight will increase with the addition of integral downlights, sensors, and emergency batteries and may vary further depending on mounting and other options.
WARRANTY5-year limited warranty. Details: lightforms.com/warranty
OPERATING TEMPERATURELuminaire MUST be installed and operated ONLY in dry or damp environments where the ambient temperature ranges from -20°C to 50°C. Luminaire operation in environments outside this temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and colour consistency.
INTEGRAL SENSORS Optional, presence (PRES), DALI-compatible PIR presence (DALI/PRES) and daylight harvesting (PHOTO) sensors available. Contact Light Forms for further information.
MANUFACTURING & CERTIFICATIONProducts are manufactured in and comply with the health, safety and environmental protection standards of the respective region in which they are sold as indicated below.
Europe Asia Greater India + Middle East
Serpentine 60SPT60 | Suspended, Surface
White WH
INTEGRAL DOWNLIGHTSOptional, aimable accent downlight spots deliver up to 1430 lumens with beam spreads from 15 ̊ to 40˚. Limitations apply. See Downlight Spots chart for further information.
PHOTOS
Serpentine 60SPT60 | Suspended, Surface
[email protected] ‧ [email protected] ‧ [email protected] 12© 2019 Light Forms Ltd.
Specifications subject to change without notice.