specialty heat exchangers every employee an owner, every ...corrosion product sampler locate and...
TRANSCRIPT
Since 1924...
Serving theProcess and Power
Generation Industries
Sentry Equipment Corp.
Courtesy of Cleaver-Brooks
Courtesy of Commonwealth Edison
Water & Steam Sampling Process Sampling Specialty Heat Exchangers
MarketingSentry maintains a professionalmarketing organization staffed bytechnical specialists at itsheadquarters. Our personnelsupport a worldwide network ofover 85 manufacturers’representatives serving a varietyof industries.
For further information contact:
SENTRY Equipment Corp.P.O. Box 127 • 856 E. Armour Road • Oconomowoc, WI 53066-0127 USA • Phone 262-567-7256 • Fax 262-567-4523Website: www.sentry-equip.com • E-mail: [email protected]
Bulletin 10.1.1 Rev. 3 ©1/01
PharmaceuticalOverflow top reactor sampler designed foraccurate/representative samples from reactorvessels. These samplers are marketedthrough our partners, ProSys Sampling, Ltd.and ProSys Sampling USA. (Top left)Bulletin 16.1.1
ChemicalExotic material spiral tube heat exchangerused to cool a highly corrosive chemical. (Topright)Bulletin 12.1.1
Hydrocarbon ProcessingExplosion proof liquid sampler provided withvacuum blower and activated carbon recoveryunit. (Bottom left)Bulletin 1.5.2
Power GenerationCustom fume hood specially designed forcollection of water/steam samples in a boilingwater reactor (BWR) nuclear power plant.This fume hood allows the operator to collectsamples without concern for airborne aerosolsleaving the cabinet. (Bottom right)Bulletin 1.41.2
Every Employee An Owner,Every Customer A Commitment....
Spiral Tube Heat ExchangersSentry spiral tube heat exchangers consist of two manifolds joined by avariable number of parallel tubes based on duty requirements. The assemblyis then coiled into a spiral or scroll. When the tube bundle is inserted into theshell, two fluid paths are created for full counter flow heat transfer.
Up to 40% more efficient than a Shell & TubePressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockLeast expensive construction for exotic materialsHeat transfer areas up to 150 ft2 (14 m2)Optional ASME "U" stamp
Bulletin 12.1.1
Helical Coil Heat ExchangersSentry makes a variety of single tube helically wound (single and double)compact heat exchangers for a broad pressure and application range with orwithout shells. These heat exchangers are well suited for OEM applicationsincluding oil coolers, sump coolers, sample coolers and other high pressure,high temperature, low flow applications.
Pressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockStandard 316SS construction with other exotic materials availableHeating transfer areas up to 5 ft2 (0.46 m2)Optional ASME "U" stamp
Bulletin 12.3.1
Plate Heat ExchangersSentry provides both a brazed and gasketed plate design for plate heatexchangers to serve a variety of OEM applications.
Copper brazed stainless steel plate unit sizes up to 825 ft2 (76 m2) at430 psi (30 bar)Gasketed plate units up to 2000 ft2 (186 m2) at 100 psi (7 bar) in 304SS, 316SS, Titanium or Hastelloy®
Optional ASME "U" stamp on gasketed unitsBulletin 7.1.1
For All Types of Process Heating and Cooling
Boiler Blowdown Heat Recovery SystemsThe unique Sentry proportional control system iswidely used throughout the world for boilersoperating at pressures below 250 psi (17 bar), andSentry offers the only system available for lowpressure (15 psi / 1 bar) heating boilers. Sentryalso offers flash tank/heat exchanger systems forboiler pressure up to 900 psi (52 bar). Sentry is theonly supplier to offer all three types of blowdownheat recovery systems.Bulletin 3.1.8
Specialty Heat Exchangers
SENTRY – Over 75 years of experience!Sentry is a worldwide supplier and technology leader in sampling components/systems and specialtyheat exchangers. We supply our products and services to most process industries including powergeneration, hydrocarbon processing, chemical, and pharmaceutical as well as the OEM manufacturersthat serve these industries. Our products provide our customers with simple and efficient ways toimprove performance, reduce maintenance, and expand capabilities.
Engineering excellence is the thread that runs through our history since our beginning in 1924 as TheHenszey Company. We began as a primary supplier to The Carnation Company for dairy power plantcomponents and milk evaporators. In 1959, we changed our name to Sentry Equipment Corp. andrefocused our efforts toward the power generation industry for sampling products and specialty heatexchangers. This effort not only expanded to other industries, but also into the supply of completesystems for power plant steam and water monitoring. We are a company of many firsts includingcompact helical coil sample coolers, adjustable ultra high pressure reducers, radiation shielded samplingstations, and non-coring needle samplers.
In 1986, the company ownership was transferred to the employees through an ESOP, and we are proudto be a 100% employee-owned company today. The employee owners of Sentry participate in makingimprovements to our products and processes at every level. We believe that value as defined by thecustomer will determine our future success. This is emphasized in our corporate vision statement.
Every Employee an Owner,Every Customer a Commitment
Sampling Products...
Single Line SamplePanel
Pre-engineered assembly for complete sampleconditioningEfficient temperature andpressure reduction for allsample typesProvides automatic constant flow controlAutomatic startup andshut down
Bulletin 1.37.1
Sample CoolerHigh efficiencyRated at 1000°F (538°C) and 5000 psi (345 bar) tubesideStainless steel, Inconel®, orother exotic materialsOne piece stainless steel shellDesigned to ASME standards – U Stamp available
Bulletin 4.10
VREL® Pressure ReducerVariable capillary designprovides adjustable pressure reductionCleanable in place withoutshutting off sample flowAll stainless steel – rated at5000 psi (345 bar) at 300°F (149°C)
Bulletin 1.10.1
Thermal Shut-Off ValveShuts down hightemperature samplein less than 5 secondsProtects analyzers andoperatorsStandard trip setting is120°F (49°C)
Bulletin 13.1.1
Back PressureRegulator/Relief Valve
Most effective way toprovide constant flowthrough on line analyzersLess prone to pluggingand sticking Fail safe relief valve
Bulletin 9.1.1
Temperature Control UnitPackaged refrigeration/heating system forclose temperature control of samplesMaintains final sampletemperature at 77°F(25°C), ±0.5°1 ton through 15 toncapacities
Bulletin 8.5.1
Sample Sequencer™ /Valve Manifold
Time-shareinstrumentation forlower equipment andmaintenance costsTrack and holdcapabilityValve assembly soldseparately
Bulletin 5.5.10
Corrosion Product SamplerLocate and identify causeof corrosionQuantify rate of corrosionMeasure effectiveness ofchemical treatment Identify sludge traps wherecorrosion products accumulate
Bulletin 11.1
• Sample Conditioning andAnalysis Panels
• Primary and Secondary Sampling Systems – Nuclear
• Post Accident SamplingSystems – Nuclear
• Process Sampling Systems• Chemical Feed Systems
Water/Steam SamplingIn the power generation area,increased emphasis on waterchemistry control requires that a welldesigned and high-quality sampleconditioning and analysis system beused to assure both representativeand accurate analysis. Sentry ledthe way in meeting theserequirements by combiningsignificant experience in sampleconditioning with state of the artanalysis instrumentation.
Cation Conductivity AccessoriesCation resin columns designedspecifically for power plantsComplete panels to measurespecific, cation, and degassedconductivity or any individualmeasurementCustom analysis panelsincluding degassed conductivity,DO, and corrosion productssampling
Bulletin 1.43.1 (degassed panel)Bulletin 6.1.1 (resin column)
For a complete listing of our brochures, visit the library page on our website or call us at 262-567-7256
Custom Systems... Process SamplingUsing our nuclear expertise,Sentry quickly evolved into aworld leader in the design andmanufacture of sampling systemsfor the process industries. Needlesamplers, tube stub samplers,and cylinder type samplers areused as building blocks for avariety of low emission processsampling systems to meet anycustomer requirement.
Service & TrainingSentry maintains a fully trainedstaff of expert engineers availableto provide on-site service, start-upand training for any sampleconditioning and analysis system.Preventative or contractmaintenance can also besupplied.
Tube Stub SamplerIdeal for sampling lowvolatility and viscousliquidsEasily interchangeable with needle samplerVariety of materials and bottle sizes available
Bulletin 1.5.4
Needle SamplerMeets MACT requirements for closed loop samplingNon-coring needle design forassured septum integrityDouble block valve and deadmanspring handle for safetyClosed loop purge for mostrepresentative sampleVariety of options including fixedvolume, carbon canisters, etc.
Bulletin 1.5.2
Back Purge SamplerSimplified closed loopsampling with purge backfeatureAssures a representativesample each timeGood application forrepresentative samplingwhen long sample linesexist
Bulletin 1.5.7
Cylinder SamplerVariety of designs tocollect gaseous and twophase samplesFlow through, purge, andvent optionsSample cylinder quickconnects and isolationvalves for easy removaland transportStandard construction316SS, exotic materialsavailable
Bulletin 1.5.5
Visit our website @ www.sentry-equip.com
SENTRY – Over 75 years of experience!Sentry is a worldwide supplier and technology leader in sampling components/systems and specialtyheat exchangers. We supply our products and services to most process industries including powergeneration, hydrocarbon processing, chemical, and pharmaceutical as well as the OEM manufacturersthat serve these industries. Our products provide our customers with simple and efficient ways toimprove performance, reduce maintenance, and expand capabilities.
Engineering excellence is the thread that runs through our history since our beginning in 1924 as TheHenszey Company. We began as a primary supplier to The Carnation Company for dairy power plantcomponents and milk evaporators. In 1959, we changed our name to Sentry Equipment Corp. andrefocused our efforts toward the power generation industry for sampling products and specialty heatexchangers. This effort not only expanded to other industries, but also into the supply of completesystems for power plant steam and water monitoring. We are a company of many firsts includingcompact helical coil sample coolers, adjustable ultra high pressure reducers, radiation shielded samplingstations, and non-coring needle samplers.
In 1986, the company ownership was transferred to the employees through an ESOP, and we are proudto be a 100% employee-owned company today. The employee owners of Sentry participate in makingimprovements to our products and processes at every level. We believe that value as defined by thecustomer will determine our future success. This is emphasized in our corporate vision statement.
Every Employee an Owner,Every Customer a Commitment
Sampling Products...
Single Line SamplePanel
Pre-engineered assembly for complete sampleconditioningEfficient temperature andpressure reduction for allsample typesProvides automatic constant flow controlAutomatic startup andshut down
Bulletin 1.37.1
Sample CoolerHigh efficiencyRated at 1000°F (538°C) and 5000 psi (345 bar) tubesideStainless steel, Inconel®, orother exotic materialsOne piece stainless steel shellDesigned to ASME standards – U Stamp available
Bulletin 4.10
VREL® Pressure ReducerVariable capillary designprovides adjustable pressure reductionCleanable in place withoutshutting off sample flowAll stainless steel – rated at5000 psi (345 bar) at 300°F (149°C)
Bulletin 1.10.1
Thermal Shut-Off ValveShuts down hightemperature samplein less than 5 secondsProtects analyzers andoperatorsStandard trip setting is120°F (49°C)
Bulletin 13.1.1
Back PressureRegulator/Relief Valve
Most effective way toprovide constant flowthrough on line analyzersLess prone to pluggingand sticking Fail safe relief valve
Bulletin 9.1.1
Temperature Control UnitPackaged refrigeration/heating system forclose temperature control of samplesMaintains final sampletemperature at 77°F(25°C), ±0.5°1 ton through 15 toncapacities
Bulletin 8.5.1
Sample Sequencer™ /Valve Manifold
Time-shareinstrumentation forlower equipment andmaintenance costsTrack and holdcapabilityValve assembly soldseparately
Bulletin 5.5.10
Corrosion Product SamplerLocate and identify causeof corrosionQuantify rate of corrosionMeasure effectiveness ofchemical treatment Identify sludge traps wherecorrosion products accumulate
Bulletin 11.1
• Sample Conditioning andAnalysis Panels
• Primary and Secondary Sampling Systems – Nuclear
• Post Accident SamplingSystems – Nuclear
• Process Sampling Systems• Chemical Feed Systems
Water/Steam SamplingIn the power generation area,increased emphasis on waterchemistry control requires that a welldesigned and high-quality sampleconditioning and analysis system beused to assure both representativeand accurate analysis. Sentry ledthe way in meeting theserequirements by combiningsignificant experience in sampleconditioning with state of the artanalysis instrumentation.
Cation Conductivity AccessoriesCation resin columns designedspecifically for power plantsComplete panels to measurespecific, cation, and degassedconductivity or any individualmeasurementCustom analysis panelsincluding degassed conductivity,DO, and corrosion productssampling
Bulletin 1.43.1 (degassed panel)Bulletin 6.1.1 (resin column)
For a complete listing of our brochures, visit the library page on our website or call us at 262-567-7256
Custom Systems... Process SamplingUsing our nuclear expertise,Sentry quickly evolved into aworld leader in the design andmanufacture of sampling systemsfor the process industries. Needlesamplers, tube stub samplers,and cylinder type samplers areused as building blocks for avariety of low emission processsampling systems to meet anycustomer requirement.
Service & TrainingSentry maintains a fully trainedstaff of expert engineers availableto provide on-site service, start-upand training for any sampleconditioning and analysis system.Preventative or contractmaintenance can also besupplied.
Tube Stub SamplerIdeal for sampling lowvolatility and viscousliquidsEasily interchangeable with needle samplerVariety of materials and bottle sizes available
Bulletin 1.5.4
Needle SamplerMeets MACT requirements for closed loop samplingNon-coring needle design forassured septum integrityDouble block valve and deadmanspring handle for safetyClosed loop purge for mostrepresentative sampleVariety of options including fixedvolume, carbon canisters, etc.
Bulletin 1.5.2
Back Purge SamplerSimplified closed loopsampling with purge backfeatureAssures a representativesample each timeGood application forrepresentative samplingwhen long sample linesexist
Bulletin 1.5.7
Cylinder SamplerVariety of designs tocollect gaseous and twophase samplesFlow through, purge, andvent optionsSample cylinder quickconnects and isolationvalves for easy removaland transportStandard construction316SS, exotic materialsavailable
Bulletin 1.5.5
Visit our website @ www.sentry-equip.com
SENTRY – Over 75 years of experience!Sentry is a worldwide supplier and technology leader in sampling components/systems and specialtyheat exchangers. We supply our products and services to most process industries including powergeneration, hydrocarbon processing, chemical, and pharmaceutical as well as the OEM manufacturersthat serve these industries. Our products provide our customers with simple and efficient ways toimprove performance, reduce maintenance, and expand capabilities.
Engineering excellence is the thread that runs through our history since our beginning in 1924 as TheHenszey Company. We began as a primary supplier to The Carnation Company for dairy power plantcomponents and milk evaporators. In 1959, we changed our name to Sentry Equipment Corp. andrefocused our efforts toward the power generation industry for sampling products and specialty heatexchangers. This effort not only expanded to other industries, but also into the supply of completesystems for power plant steam and water monitoring. We are a company of many firsts includingcompact helical coil sample coolers, adjustable ultra high pressure reducers, radiation shielded samplingstations, and non-coring needle samplers.
In 1986, the company ownership was transferred to the employees through an ESOP, and we are proudto be a 100% employee-owned company today. The employee owners of Sentry participate in makingimprovements to our products and processes at every level. We believe that value as defined by thecustomer will determine our future success. This is emphasized in our corporate vision statement.
Every Employee an Owner,Every Customer a Commitment
Sampling Products...
Single Line SamplePanel
Pre-engineered assembly for complete sampleconditioningEfficient temperature andpressure reduction for allsample typesProvides automatic constant flow controlAutomatic startup andshut down
Bulletin 1.37.1
Sample CoolerHigh efficiencyRated at 1000°F (538°C) and 5000 psi (345 bar) tubesideStainless steel, Inconel®, orother exotic materialsOne piece stainless steel shellDesigned to ASME standards – U Stamp available
Bulletin 4.10
VREL® Pressure ReducerVariable capillary designprovides adjustable pressure reductionCleanable in place withoutshutting off sample flowAll stainless steel – rated at5000 psi (345 bar) at 300°F (149°C)
Bulletin 1.10.1
Thermal Shut-Off ValveShuts down hightemperature samplein less than 5 secondsProtects analyzers andoperatorsStandard trip setting is120°F (49°C)
Bulletin 13.1.1
Back PressureRegulator/Relief Valve
Most effective way toprovide constant flowthrough on line analyzersLess prone to pluggingand sticking Fail safe relief valve
Bulletin 9.1.1
Temperature Control UnitPackaged refrigeration/heating system forclose temperature control of samplesMaintains final sampletemperature at 77°F(25°C), ±0.5°1 ton through 15 toncapacities
Bulletin 8.5.1
Sample Sequencer™ /Valve Manifold
Time-shareinstrumentation forlower equipment andmaintenance costsTrack and holdcapabilityValve assembly soldseparately
Bulletin 5.5.10
Corrosion Product SamplerLocate and identify causeof corrosionQuantify rate of corrosionMeasure effectiveness ofchemical treatment Identify sludge traps wherecorrosion products accumulate
Bulletin 11.1
• Sample Conditioning andAnalysis Panels
• Primary and Secondary Sampling Systems – Nuclear
• Post Accident SamplingSystems – Nuclear
• Process Sampling Systems• Chemical Feed Systems
Water/Steam SamplingIn the power generation area,increased emphasis on waterchemistry control requires that a welldesigned and high-quality sampleconditioning and analysis system beused to assure both representativeand accurate analysis. Sentry ledthe way in meeting theserequirements by combiningsignificant experience in sampleconditioning with state of the artanalysis instrumentation.
Cation Conductivity AccessoriesCation resin columns designedspecifically for power plantsComplete panels to measurespecific, cation, and degassedconductivity or any individualmeasurementCustom analysis panelsincluding degassed conductivity,DO, and corrosion productssampling
Bulletin 1.43.1 (degassed panel)Bulletin 6.1.1 (resin column)
For a complete listing of our brochures, visit the library page on our website or call us at 262-567-7256
Custom Systems... Process SamplingUsing our nuclear expertise,Sentry quickly evolved into aworld leader in the design andmanufacture of sampling systemsfor the process industries. Needlesamplers, tube stub samplers,and cylinder type samplers areused as building blocks for avariety of low emission processsampling systems to meet anycustomer requirement.
Service & TrainingSentry maintains a fully trainedstaff of expert engineers availableto provide on-site service, start-upand training for any sampleconditioning and analysis system.Preventative or contractmaintenance can also besupplied.
Tube Stub SamplerIdeal for sampling lowvolatility and viscousliquidsEasily interchangeable with needle samplerVariety of materials and bottle sizes available
Bulletin 1.5.4
Needle SamplerMeets MACT requirements for closed loop samplingNon-coring needle design forassured septum integrityDouble block valve and deadmanspring handle for safetyClosed loop purge for mostrepresentative sampleVariety of options including fixedvolume, carbon canisters, etc.
Bulletin 1.5.2
Back Purge SamplerSimplified closed loopsampling with purge backfeatureAssures a representativesample each timeGood application forrepresentative samplingwhen long sample linesexist
Bulletin 1.5.7
Cylinder SamplerVariety of designs tocollect gaseous and twophase samplesFlow through, purge, andvent optionsSample cylinder quickconnects and isolationvalves for easy removaland transportStandard construction316SS, exotic materialsavailable
Bulletin 1.5.5
Visit our website @ www.sentry-equip.com
Since 1924...
Serving theProcess and Power
Generation Industries
Sentry Equipment Corp.
Courtesy of Cleaver-Brooks
Courtesy of Commonwealth Edison
Water & Steam Sampling Process Sampling Specialty Heat Exchangers
MarketingSentry maintains a professionalmarketing organization staffed bytechnical specialists at itsheadquarters. Our personnelsupport a worldwide network ofover 85 manufacturers’representatives serving a varietyof industries.
For further information contact:
SENTRY Equipment Corp.P.O. Box 127 • 856 E. Armour Road • Oconomowoc, WI 53066-0127 USA • Phone 262-567-7256 • Fax 262-567-4523Website: www.sentry-equip.com • E-mail: [email protected]
Bulletin 10.1.1 Rev. 3 ©1/01
PharmaceuticalOverflow top reactor sampler designed foraccurate/representative samples from reactorvessels. These samplers are marketedthrough our partners, ProSys Sampling, Ltd.and ProSys Sampling USA. (Top left)Bulletin 16.1.1
ChemicalExotic material spiral tube heat exchangerused to cool a highly corrosive chemical. (Topright)Bulletin 12.1.1
Hydrocarbon ProcessingExplosion proof liquid sampler provided withvacuum blower and activated carbon recoveryunit. (Bottom left)Bulletin 1.5.2
Power GenerationCustom fume hood specially designed forcollection of water/steam samples in a boilingwater reactor (BWR) nuclear power plant.This fume hood allows the operator to collectsamples without concern for airborne aerosolsleaving the cabinet. (Bottom right)Bulletin 1.41.2
Every Employee An Owner,Every Customer A Commitment....
Spiral Tube Heat ExchangersSentry spiral tube heat exchangers consist of two manifolds joined by avariable number of parallel tubes based on duty requirements. The assemblyis then coiled into a spiral or scroll. When the tube bundle is inserted into theshell, two fluid paths are created for full counter flow heat transfer.
Up to 40% more efficient than a Shell & TubePressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockLeast expensive construction for exotic materialsHeat transfer areas up to 150 ft2 (14 m2)Optional ASME "U" stamp
Bulletin 12.1.1
Helical Coil Heat ExchangersSentry makes a variety of single tube helically wound (single and double)compact heat exchangers for a broad pressure and application range with orwithout shells. These heat exchangers are well suited for OEM applicationsincluding oil coolers, sump coolers, sample coolers and other high pressure,high temperature, low flow applications.
Pressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockStandard 316SS construction with other exotic materials availableHeating transfer areas up to 5 ft2 (0.46 m2)Optional ASME "U" stamp
Bulletin 12.3.1
Plate Heat ExchangersSentry provides both a brazed and gasketed plate design for plate heatexchangers to serve a variety of OEM applications.
Copper brazed stainless steel plate unit sizes up to 825 ft2 (76 m2) at430 psi (30 bar)Gasketed plate units up to 2000 ft2 (186 m2) at 100 psi (7 bar) in 304SS, 316SS, Titanium or Hastelloy®
Optional ASME "U" stamp on gasketed unitsBulletin 7.1.1
For All Types of Process Heating and Cooling
Boiler Blowdown Heat Recovery SystemsThe unique Sentry proportional control system iswidely used throughout the world for boilersoperating at pressures below 250 psi (17 bar), andSentry offers the only system available for lowpressure (15 psi / 1 bar) heating boilers. Sentryalso offers flash tank/heat exchanger systems forboiler pressure up to 900 psi (52 bar). Sentry is theonly supplier to offer all three types of blowdownheat recovery systems.Bulletin 3.1.8
Specialty Heat Exchangers
Since 1924...
Serving theProcess and Power
Generation Industries
Sentry Equipment Corp.
Courtesy of Cleaver-Brooks
Courtesy of Commonwealth Edison
Water & Steam Sampling Process Sampling Specialty Heat Exchangers
MarketingSentry maintains a professionalmarketing organization staffed bytechnical specialists at itsheadquarters. Our personnelsupport a worldwide network ofover 85 manufacturers’representatives serving a varietyof industries.
For further information contact:
SENTRY Equipment Corp.P.O. Box 127 • 856 E. Armour Road • Oconomowoc, WI 53066-0127 USA • Phone 262-567-7256 • Fax 262-567-4523Website: www.sentry-equip.com • E-mail: [email protected]
Bulletin 10.1.1 Rev. 3 ©1/01
PharmaceuticalOverflow top reactor sampler designed foraccurate/representative samples from reactorvessels. These samplers are marketedthrough our partners, ProSys Sampling, Ltd.and ProSys Sampling USA. (Top left)Bulletin 16.1.1
ChemicalExotic material spiral tube heat exchangerused to cool a highly corrosive chemical. (Topright)Bulletin 12.1.1
Hydrocarbon ProcessingExplosion proof liquid sampler provided withvacuum blower and activated carbon recoveryunit. (Bottom left)Bulletin 1.5.2
Power GenerationCustom fume hood specially designed forcollection of water/steam samples in a boilingwater reactor (BWR) nuclear power plant.This fume hood allows the operator to collectsamples without concern for airborne aerosolsleaving the cabinet. (Bottom right)Bulletin 1.41.2
Every Employee An Owner,Every Customer A Commitment....
Spiral Tube Heat ExchangersSentry spiral tube heat exchangers consist of two manifolds joined by avariable number of parallel tubes based on duty requirements. The assemblyis then coiled into a spiral or scroll. When the tube bundle is inserted into theshell, two fluid paths are created for full counter flow heat transfer.
Up to 40% more efficient than a Shell & TubePressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockLeast expensive construction for exotic materialsHeat transfer areas up to 150 ft2 (14 m2)Optional ASME "U" stamp
Bulletin 12.1.1
Helical Coil Heat ExchangersSentry makes a variety of single tube helically wound (single and double)compact heat exchangers for a broad pressure and application range with orwithout shells. These heat exchangers are well suited for OEM applicationsincluding oil coolers, sump coolers, sample coolers and other high pressure,high temperature, low flow applications.
Pressure ratings exceeding 10,000 psi (690 bar)Compact and lightweightHighly resistant to thermal and pulsation shockStandard 316SS construction with other exotic materials availableHeating transfer areas up to 5 ft2 (0.46 m2)Optional ASME "U" stamp
Bulletin 12.3.1
Plate Heat ExchangersSentry provides both a brazed and gasketed plate design for plate heatexchangers to serve a variety of OEM applications.
Copper brazed stainless steel plate unit sizes up to 825 ft2 (76 m2) at430 psi (30 bar)Gasketed plate units up to 2000 ft2 (186 m2) at 100 psi (7 bar) in 304SS, 316SS, Titanium or Hastelloy®
Optional ASME "U" stamp on gasketed unitsBulletin 7.1.1
For All Types of Process Heating and Cooling
Boiler Blowdown Heat Recovery SystemsThe unique Sentry proportional control system iswidely used throughout the world for boilersoperating at pressures below 250 psi (17 bar), andSentry offers the only system available for lowpressure (15 psi / 1 bar) heating boilers. Sentryalso offers flash tank/heat exchanger systems forboiler pressure up to 900 psi (52 bar). Sentry is theonly supplier to offer all three types of blowdownheat recovery systems.Bulletin 3.1.8
Specialty Heat Exchangers