speciality doors & tilt fittings - b&d garage doors ... · speciality doors & tilt...

speciality doors & tilt fittings

Flex-A-Door®

Design-A-Door®

Tilt-A-Dor®

Track fittings

Jamb fittings

Natural Timber DoorsTimberpanel™

Craftpanel™

June 2016SECTION 03/1RETURN TO INDEX

sliding overhead garage door

descriptionThe B&D Flex-A-Door® offers an alternative to the tilting door in situations with minimal headroom clearance.

Flex-A-Door doors revolutionary, patented design comprises the durable, attractive Roll-A-Door® curtain, fitted on a curving track, to lift from a vertical position up into a horizontal position, close to the ceiling.

profile

size rangeAvailable in sizes to suit up to 2790mm door height and 1200mm to 3150mm opening width.

features• Flex-A-Doorismucheasiertouse,asitislightto

lift, and does not require the out / up action of traditional tilt doors.

• Thespringsareenclosedandaboveheadheight- well out of the reach of children, and there are no moving brackets or door supports which could act as finger or arm entrapments.

• Flex-A-Doorhasanoptionalpatentedretractablehead infill panel for use in low headroom situations.

• Nylofelt® running strips and nylon rollers with bearings ensure smooth, quiet, greaseless operation.

• Plasticinsertinhorizontaltrackprovidessmooth,quiet operation.

• Steeltrack/braceanddoorstops,withbuffersforadded safety and quietness.

• Weathersealwithdeepcushioning,helpsrestrictentry of water and leaves.

• Waistheightcentreliftlockwithdoublebarlocking action for extra security.

• Flex-A-DoorutilisestheRoll-A-Doorcurtain,providing a clean, neat appearance of the door on both the outside and the inside.

• Centreliftlockhasadeepfingerrecessexternally and turn knob internally for easier operation.

• Doorcanbeleftopenatanyheight,unlikethe traditional tilt door, giving the added convenience of allowing the door to be partially opened for ventilation, while still providing privacy in the garage, and the door won’t blow shut in the wind.

• Flex-A-Doorfitsbehindtheopening,restrictingthe wind from blowing through the entry way, as happens with jamb tilt doors, which fit within the opening and therefore have a gap on each side.

• Flex-A-Doorissuitableforinstallationwithsectional automatic garage door openers providing added convenience and security.

•Tailormade-eachdooristailormadetoorder.Available in 5mm width increments to perfectly suit the application.

•SpringsdesignedtocomplywithrequirementsofAustralianStandards- 20,000 cycles.

PANEL PROFILE

MODEL Flex-A-Door

MODEL CODE R1X

COIL THICKNESS 0.4mm

COIL TyPE G300COLORBOND®

MAX DOOR HEIGHT 2790mm

MAX DOOR WIDTH 3150mm

LOCKING Centreliftlock

TAPER OPTION No

HIGH WIND OPTION No

ProductCode

R1X


ProductCode

R1X

colours/finishesAvAILABLE IN

• ExtensiverangeofCOLORBOND® colours plus Zincalume® finish (see colour chart for details).

options• Perforationsforventilation.

• Retractableheadinfillpanel.

NOTES / INFORMATIONA) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal

products.ConsultB&DDoorsoryourB&DDealerforadvice.B) Flex-A-Doorgaragedoors,innormalresidentialusearecoveredbyaoneyearwarrantyforallcomponentsandlabourconditionaloncareandservicingas

recommendedinthedoor’shandbook.Fulldetailsofthewarrantyareavailable,onrequest,fromyournearestB&Doffice.C)Thecompanyreservestherighttomakechangesorimprovementstotheproductsoraccessorieswithoutnoticeandwithoutincurringanyobligationtomake

similar changes or improvements to goods previously ordered.D) PrefixedTrademarksaretrademarksofB&DAustraliaPty.Ltd.Abuseofthesetrademarksmayresultinlegalaction.E) B&Dproductshavemanypatentsandregistereddesignsapplicable.F)Flex-A-Doorhas“PATENTAPPLIEDFOR,ProvisionalPatentApplicationNo2004901986”G) COLORBOND® and Zincalume®areregisteredtrademarksofBlueScopeSteelLimited.H) WhileBlueScopeSteelisourpreferredsupplier,steelproductsfromothersourcesmayalsobeused.I) Detailscorrectatdateofpublication.Specificationssubjecttochangewithoutnotice.

installation requirements

Retractable HeadInfill

Panel

➝Headroom

Flex-A-Door® curtain in closed position

Flex-A-Door® curtain in open position

All measurements are in millimetres and are minimum unless otherwise shown.

sliding overhead garage door

INSTALLATION CLEARANCES

Product Heights

Headroom without Retractable Head Infill

Panel Option A

Retractable Head Infill Panel Option

B Sideroom

Minimum Garage Depth

E (manual

operation)Manual Opener Manual Opener

R1XUp to 2130 180 210 90 120 100 2950

2131 to 2790 180 210 90 120 100 3610


ProductCode

P7D

descriptionThe B&D Design-A-Door® features an aluminium powder coated door frame which has a high strength to weight ratio. Customer has the flexibility to select from a range of different insert options, to design a door that suits the look of their home.

Thesectionalgaragedoorismadeupofanumberof rigid sections that are hinged together and move vertically in the opening, then horizontally along the ceiling, guided by tracks and counterbalanced with springs.

profile

size rangeAvailable in sizes from 1370mm to 3420mm height and1800mmto6600mminwidth(slatprofile5900mm max).

Insertsmeasureupto525mmhigh,andupto1428mmwide.Theinsertsizecannotbechanged.Widthislimitedto1200mmforsomeinserts,checkwithyourB&Drepresentativeforfurtherdetails.

YourB&DDesign-A-Doorwillsuityourgarageopening with equal sized panels and evenly spaced inserts.

features• Framesavailableinnaturalaluminiumfinishor

choose from over 100 Dulux standard powder coat colours.

• Choosefromarangeofinsertoptionsorcombinedifferent inserts to suit your requirements.

• Galvanisedhingesandhangersareused,providing the door with:

- Additional strength. - Durability. - Resistance to corrosion.

• Thealuminiumframeisconstructedfrom1.5mmthick, box shaped extrusion with tongue and groove top and bottom edges for weather protection. For wide doors addition web extrusions are included for additional strength.

• Insertsfittedusingsnap-onextrusionsandglazingseals.

• Eachdooristailormadetosuitthesizerequired.

• Wheelshaveballbearingsforsmoother,moredurable operation.

• SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.

• Reinforcingforwidedoors-allpanelsreinforcedfordoorwidthsof3800mmandover.

• CanbemanuallyorelectricallydrivenwitheitherdomesticControll-A-Doororindustrialcommercial Axess opener.

PANEL PROFILE

INSERT PROFILE Varies for each insert

MODEL Design-A-Door

MODEL CODE P7D

EXTRUSION THICKNESS 1.5mm


MAX DOOR WIDTH 6600mm (slat profile 5900mm max)

TAPER OPTION Hinged and fixed option

HIGH WIND OPTION No

residential sectional garage door


ProductCode

P7D

Design-A-Door® assorted panel insertscolours/finishesFrame available in aluminium finish or in over 100 powder coating colour options from the standard Dulux range.

INSERTS AvAILABLE IN

1. Alumpanel™ inserts - aluminium stucco available in natural aluminium or powder coated in a choice of over 100 colours.

2. Alumpanel™ with air inserts - in natural aluminium or powder coated in a choice of over 100 colours.PerforationMaterial:1mmthickaluminiumgrade5005-H34.Perforations:3.25mmdiameter @ 6.1mm staggered pitch. OpenArea:25.74%.size3.18mmroundholes.

3. Aluminium plate inserts - in natural aluminium finish or powder coated in a choice of over 100 colours,in:a.Checkerplatepattern

4. Acrylic panel inserts - 4.5mm acrylic inserts available in clear, smoke or opaque finish.

5. Minicorrugatedsteelinserts-powdercoatedina choice of over 100 colours.

6. Vertipanel™ inserts - available in aluminium or powder coated in a choice of over 100 colours.

7. Airpanel™inserts-attractiveAmplimesh68Agrilldesignoffering80%airflow.Availableinaluminium or powder coated in a choice of over 100 colours.

8. Aluminiumslatted-PowdercoatedorKnotwood™TimberLook-50mmx10mmwithalargerangeofcolours.Maximumwidthforslatprofileis5900mm-uptoapprox.40%airflowcan be achieved by adjusting the slat spacing. AcrylicorColorbondsteelcanbeaddedtoslatted doors for additional weather protection (door size restrictions apply).

9. Flat steel inserts in a choice of smooth or wood look embossed. Available in a range of ColorbondcoloursincludingTimbagrain.

10. Ribbed steel inserts in a choice of smooth or wood look embossed. Available in a range of ColorbondcoloursincludingTimbagrain.

11.Omnipanel™ inserts - allows you to combine different inserts to suit your design requirements. ThisgreatversatilitymeanstheP7doorcanbeused in an extensive range of applications.

options• Tapers-forgaragefloorsthatslopeacrossthe

opening.

1. Alumpanel™ 2. Alumpanel™ with Air

10. Ribbed steel

4. Acrylic

7. Airpanel™

6. Vertipanel™

9. Flat steel

3. Aluminium checker plate

5.Minicorrugatedsteel

8.Aluminiumslatted



NOTES / INFORMATIONA) For areas within one kilometre of a corrosive environment eg. salt air or

industrial fallout, special care and maintenance are generally required formetalproducts.ConsultB&DDoorsoryourB&DDealerforadvice.

B) Design-A-Doorgaragedoors,innormalresidentialusearecoveredbya one year warranty for all components and labour conditional on care and servicing as recommended in the door’s handbook. Full details of thewarrantyareavailable,onrequest,fromyournearestB&Doffice.

C)Thecompanyreservestherighttomakechangesorimprovementstothe products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered.

D) PrefixedTrademarksaretrademarksofB&DAustraliaPty.Ltd.Abuseofthese trademarks may result in legal action.

E) B&Dproductshavemanypatentsandregistereddesignsapplicable.F) Detailscorrectatdateofpublication.Specificationssubjecttochange

without notice.


ProductCode

P7D

NOTE:Sideroomdimensionsincludedooroverlap,ofopening, of 30mm on each side. All measurements are in millimetres and are minimum unless otherwise shown.


INSTALLATION CLEARANCES - standard headroom

Headroom (mm) Sideroom (mm)

Recommended With Opener Recommended each side

From (incl.) Height

To (incl.) Height

Up to 4705W

4710 to 5285W

Over 5285W

Up to 4705W

4710 to 5285W

Over 5285W

1825 2275 340 340 340 390 390 390 120

2280 2850 340 340 390 390 390 440 120

2855 3420 340 390 390 390 440 440 120

INSTALLATION CLEARANCES - low headroom


Recommended With Opener Recommended each side

From (incl.) Height

To (incl.) Height

Up to 4705W

4710 to 5285W

Over 5285W

Up to 4705W

4710 to 5285W

Over 5285W

Up to 15m2

Over 15m2

1825 2275 190 190 190 240 240 240 155 195

2280 2850 190 190 200 240 240 250 155 195

2855 3420 190 200 200 240 250 250 155 195


ProductCode

P7D

notes



descriptionThe B&D range of Tilt-A-Dor® fittings offer the opportunity to create a door that is in harmony with its surroundings, giving the building a truly tailored and unique appearance.

Withdurabilityandsafetyprimaryconcerns,B&DTilt-A-DorfittingsofferthequalitythatisexpectedwithallB&DDoors,andprovideyouwiththeopportunity to design a door that is only limited by your imagination.

Tilt-A-DorfittingsareavailableinTrackconfigurations.Trackfittingsfitalongsidethedoorand raise and support the door so that it rests on a track that hangs horizontally just below the height of the ceiling.

features•Springsdesignedtocomplywithrequirementsof

AustralianStandards-20,000cycles.

• Newpatentedspringrestraintfeaturetoensurethat spring movement is contained, and eliminates the possibility of spring separation from the fitting.

• Enclosedspringendsrestrictspringmovementand consequently decrease the chance of spring escape.

• Springsprovideoptimumperformancethroughout the working life of the fittings.

• Minimalinstallationclearancesrequiredgivingthe fittings the ability to fit where some other styles of garage doors will not.

• Suppliedwithweatherstripforfittingtothedoorpanel, to help restrict entry of water and leaves.

• Strengthenedbearingdesignforgreaterdurability over the life cycle of the fittings.

• Robustanti-swaybrackettolimitthedegreeoflateral movement.

• Availableinanumberofconfigurationstosuitboth single and double width openings.

• CanbefittedwithaControll-A-Door®SectionalDoorOpenertoensureeffortlessoperation.

colours/finishesTheB&Dtiltfittingrangeisavailableinapowdercoatfinish.Thisoffersgreaterdurabilityandresistance to corrosion.

track fittings


selection charts xyz distance on installationThistableisonlyfordoorthicknessupto50mm(50mm door thickness used in this calculation).

FOR DOOR WITH THICKNESS MORE THAN 50MM.

For example:

ReoPlateDimensions300x180x2.0mm120x180x1.0mm

Door thickness 70mm X = 1673 + (70 - 50mm) = 1693mm

MODEL:70-T-1950

LINTEL

FLOOR

Steel REO-Plate (300x180x2)2 off suppliedCut any excessive material here

USE M4 (6 off)TEK Screw

Z

Z

X

track fittings

SINGLE SPRING/SIDE

2851 min

2850 max2451 min

2450 max2251 min

70-T-2450BrownSpring


2250 max1951 min



1950 max1800 min

70-T1950BrownSpring


Door Weight (kg) 30 70 71 100

Do

or H

eig

ht (

mm

)

DOUBLE SPRING/SIDE

3050 max2701 min

120-T-3050OrangeSpring


2700 max2401 min



2400 max2101 min



2100 max1900 min



Door Weight (kg) 101 120 121 175

Do

or H

eig

ht (

mm

)

SPRING SPECIFICATIONS

Colour Wire Dia.

Spring OD

Active Length

Brown 5.6 41 542

Orange 5.6 41 695

NEW MODEL

REO-PLATE POS. "X"

P/ARM PIvOT-

PIvOT "y"

MAIN PIvOT POS.

"Z"

70-T-1950 OT1804 1673 775 913

70-T-2250 OT1805 1843 870 988

70-T-2450 OT1806 2138 1020 1133

100-T-1950 OT1807 1673 775 913

100-T-2250 OT1808 1843 870 988

100-T-2450 OT1809 2138 1020 1133

120-T-2100 OT1812 1673 775 913

120-T-2400 OT1813 1843 870 988

120-T-2700 OT1814 2138 1020 1133

120-T-3050 OT1815 2448 1170 1293

175-T-2100 OT1816 1673 775 913

175-T-2400 OT1817 1843 870 988

175-T-2700 OT1818 2138 1020 1133

175-T-3050 OT1819 2463 1170 1308


Y

X

AB

TIL

T T

RA

CK

TR

AC

K T

YP

ELE

NG

TH

70-1

00-T

-195

017

1070

-100

-T-2

250

1890

70-1

00-T

-245

019

3512

0-T

-210

017

1012

0-T

-240

018

9012

0-T

-270

021

90

120-

T-3

050

2515

175-

T-2

100

1765

17

5-T

-240

019

3517

5-T

-270

022

3017

5-T

-305

025

55

PO

WE

R A

RM

RE

O P

LAT

E P

OS

.T

O T

OP

OF

DO

OR

MO

DE

L"Y

""A

""B

""X

"70

-T-1

950

775

413

1673

70-T

-225

087

041

318

4370

-T-2

450

1020

413

2138

100-

T-1

950,

120

-T-2

100

775

474

1673

100-

T-2

150,

120

-T-2

400

870

474

1843

100-

T-2

450,

120

-T-2

700

1020

47

421

3812

0-T

-305

011

70

474

2448

175-

T-2

100

775

52

416

7317

5-T

-240

087

052

418

4317

5-T

-270

010

2052

421

3817

5-T

-305

011

7052

424

63

SIN

GLE

SP

RIN

G IN

ST

ALL

AT

ION

SH

OW

N L

EF

T S

IDE

ON

LY70

-100

-T (

All

Mod

els)

2 x

Bro

wn

Spr

ings

DO

UB

LE S

PR

ING

INS

TA

LLA

TIO

NS

HO

WN

RIG

HT

SID

E O

NLY

120-

175-

T-2

100-

2400

4 x

Bro

wn

Spr

ings

120-

175-

T-2

700-

3050

4 x

Ora

nge

Spr

ings

BO

TT

OM

WE

AT

HE

R S

TR

IPM

OD

EL

LEN

GT

H70

-100

-T-1

950

1480

70-1

00-T

-225

017

0512

0-17

5-T

-210

014

8012

0-17

5-T

-240

017

0512

0-17

5-T

-270

019

8012

0-17

5-T

-305

025

55

TO

P W

EA

TH

ER

ST

RIP

MO

DE

L"L

EN

GT

H"

"WID

TH

"70

-100

-T-1

950

600

4770

-100

-T-2

250

675

4770

-100

-T-2

450

700

4712

0-T

-210

060

065

120-

T-2

400

675

6512

0-T

-270

070

065

120-

T-3

050

800

6517

5-T

-210

060

080

175-

T-2

400

675

8017

5-T

-270

070

080

175-

T-3

050

800

80

DR

AW

ING

LO

CA

TIO

N=

M:\B

iant

o S

\Pro

ject

s\T

AD

Rat

iona

lisat

ion\

TR

AC

K\C

AD

\TA

D\D

ES

IGN

DE

VE

LOP

ME

NT

NO

TE

: IN

TE

RIM

SP

RIN

GS

SP

EC

SS

ING

LE S

PR

ING

INT

ER

IM50

-T (

All

Mod

els)

2 x

Blu

e S

prin

gs70

-T (

All

Mod

els)

2 x

Yel

low

Spr

ings

120-

T (

All

Mod

els)

4 x

Yel

low

Spr

ings

PE

RF

OR

AT

ED

AN

GLE

TR

AC

K B

RA

CK

ET

TY

PIC

AL

TIL

T D

OO

R

KIC

KE

R A

SS

EM

BLY

DO

UB

LE S

PR

ING

HO

OK P

IG T

AIL

SP

RIN

G A

NC

HO

RB

RA

CK

ET

RE

INF

OR

CIN

GP

LAT

E

MA

INP

IVO

TB

RA

CK

ET

MA

INP

IVO

TS

HA

FT

FO

OT

BR

AC

KE

T

KIC

KE

RA

SS

EM

BLY

PO

WE

R A

RM

X-S

EC

TIO

N

track fittings




B) Tilt-A-Dorfittings,innormalresidentialuse,arecoveredbyatwoyearwarranty for all components and labour conditional on care and servicing as recommended in the door’s handbook. Full details of the warrantyareavailable,onrequest,fromyournearestB&Doffice.




without notice.


*Thisisaccurateforstandardinstallations.Alldoorsrequirediagonalmeasurements.Allmeasurementsareinmillimetersandareminimumunless otherwise shown.

Headroom x

DoorWidth

OpeningWidth

Do

or

He

igh

t

Op

en

ing

He

igh

t

Sid

ero

om

12mm10mm10mm

NOTE:MeasurementXwillvarydependingondoorthickness.

size rangeTheextensiverangeofB&Dtiltfittingssuitonepiecedoorsweighingbetween30and175kgandheightsof1800mmto3050mm.

track fittings

WEIGHT(kgs)

HEIGHT (mm)

1800to

1850

1851to

1900

1901to

1950

1951to

2100

2101to

2250

2251to

2400

2401to

2450

2451to

2700

2701 to

3050

30 to 70 70-T-1950 70-T-2250 70-T-2450

71 to 100 100-T-1950 100-T-2250 100-T-2450

101 to 120

120-T-2100 120-T-2400 120-T-2700 120-T-3050

121 to 175 175-T-2100 175-T-2400 175-T-2700 175-T-3050


Fitting TypeHeadroom

SideroomManual Opener

Track 50mm 100mm70mm(Model70-T,100-T,120-T)

90mm(Model175-T)

DOOR PANEL CLEARANCES

Fitting Type Manufactured Door Height Manufactured Door Width X

Track OpeningHeight-27mm OpeningWidth-20mm 15mm


descriptionThe B&D range of Tilt-A-Dor® fittings offer the opportunity to create a door that is in harmony with its surroundings, giving the building a truly tailored and unique appearance.

Withdurabilityandsafetyprimaryconcerns,B&DTilt-A-DorfittingsofferthequalitythatisexpectedwithallB&DDoors,andprovideyouwiththeopportunity to design a door that is only limited by your imagination.

Tilt-A-DorfittingsareavailableinJambconfigurations. Jamb fittings fit alongside the door and raise and support the door so that it rests horizontally just below the height of the ceiling.

Thisfittingisidealwherethereislimitedinternalbackroom as the panel does not fully retract.

features•Springsdesignedtocomplywithrequirementsof

AustralianStandards-20,000cycles.

• Newpatentedspringrestraintfeaturetoensurethat spring movement is contained, and eliminates the possibility of spring separation from the fitting.

• Enclosedspringendsrestrictspringmovementand consequently decrease the chance of spring escape.

• Springsprovideoptimumperformancethroughout the working life of the fittings.

• Minimalinstallationclearancesrequiredgivingthe fittings the ability to fit where some other styles of garage doors will not.

• Strengthenedbearingdesignforgreaterdurability over the life cycle of the fittings.

• Availableinanumberofconfigurationstosuitboth single and double width openings.

• CanbefittedwithaControll-A-Door®SectionalDoorOpenertoensureeffortlessoperation.

colours/finishesTheB&Dtiltfittingrangeisavailableinapowdercoatfinish.Thisoffersgreaterdurabilityandresistance to corrosion.

jamb fittings


selection charts

SPRING

2250 max1800 min

70J&70JS/Fix

GreenSpring

90J BlackSpring

Door Weight (kg) 30 70 71 90D

oo

r He

ight

(m

m)



B) Tilt-A-Dorfittings,innormalresidentialuse,arecoveredbyatwoyearwarranty for all components and labour conditional on care and servicing as recommended in the door’s handbook. Full details of the warrantyareavailable,onrequest,fromyournearestB&Doffice.




without notice.


*Thisisaccurateforstandardinstallations.Alldoorsrequirediagonalmeasurements.Allmeasurementsareinmillimetersandareminimumunless otherwise shown.

NOTE:Openersareonlyrecommendedtobefittedinposition1or2.

jamb fittings

SPRING SPECIFICATIONS

Colour Wire Dia.

Spring OD

Active Length

Green 5 38 695

Black 6 43.6 740


Fitting TypeHeadroom

SideroomManual Opener

Jamb 25mm - 125mm 100mm - 175mm70mm(Model50-T,120-T)

50mm

DOOR PANEL CLEARANCES

Fitting Type Manufactured Door Height Manufactured Door Width X

Jamb OpeningHeight-27mm OpeningWidth-20mm 15mm

Headroom x

DoorWidth

OpeningWidth

Do

or

He

igh

t

Op

en

ing

He

igh

t

Sid

ero

om

12mm10mm10mm

NOTE:MeasurementXwillvarydependingondoorthickness.


D*

SIN

GLE

SP

RIN

G IN

ST

ALL

AT

ION

70J

& 7

0J S

/F2

x G

reen

Spr

ings

Doo

r W

eigh

t 30

- 70

kg

90J

2 x

Bla

ck S

prin

gsD

oor

Wei

gth

70 -

90

kg

HO

LE N

o.1

23

ME

AS

UR

E D

OW

N51

048

043

5

DR

AW

ING

LO

CA

TIO

N: M

:\Bia

nto

S\P

roje

cts\

TA

D R

atio

nalis

atio

n\JA

MB

\CA

D\B

earin

g w

ith b

ushi

ng

TY

PIC

AL

TIL

T D

OO

RH

EIG

HT

: 180

0 -

2250

mm

WE

IGH

T: 3

0 -

90 k

g

0

2

00

4

00

600

8

00

1

000

mm

125

100

75 50 25 0 -25

-50

-75

-100

-125

HEADROOM

DIS

TA

NC

E D

OO

R T

RA

VE

LS

1 2

3

D*

= M

EA

SU

RE

DO

WN

+ D

OO

R T

HIC

KN

ES

S

SE

E D

ET

AIL

A

SE

E D

ET

AIL

B

DE

TA

IL A

SC

ALE

1:5

KIC

KE

R A

SS

EM

BLY

DE

TA

IL B

SC

ALE

1:5

PIG

TA

IL

SP

RIN

G A

NC

HO

RB

RA

CK

ET

SE

E D

ET

AIL

C

LIN

TE

L

DO

OR

SC

ALE

1:5

DE

TA

IL C

HO

LE N

o.1

HO

LE N

o.2

HO

LE N

o.3

70J

SID

E F

IX S

PR

ING

AN

CH

OR

BR

AC

KE

T

70J

SID

E F

IX A

SS

EM

BLY

jamb fittings


notes

jamb fittings


ProductCode

P4W

descriptionThe Timberpanel™ door is a timber sectional overhead garage door with timber boards across each panel.

TheTimberpaneldoorfeaturesslimhorizontalboardsmadefromthehighestqualityWesternRedCedarandstrengthenedwithaluminiumextrusionfor extra support.


profile

size rangeAvailableinsizesfrom1870mmto2660mminheightand from 2020mm to 5500mm in width.

features• Tongue&grooveedgepanelprofile.

• Galvanisedhinges.

• Tailormade-eachdooristailormadetoorder.(Theyarenotmadeupfromamixofstandardsize panels).


•SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.

PANEL PROFILE

PATTERN OR RIB TyPE

MODEL Timberpanel

MODEL CODE P4W

DOOR SURFACE WesternRedCedar



TAPER OPTION Yes

HIGH WIND OPTION No

Timberpanelresidential sectional garage door


ProductCode

P4W

colours/finishesB&DTimberpaneldoorshavetwothickcoatsofSikkensTHB077,naturalcolour,overtheSikkensHLSbase sealer coat for weather protection.


opening.

• Externallock.



B) Timberpaneldoors,inresidentialuse,arecoveredbya12monthwarranty on the structual integrity of the door (excludes salt corrosion), conditional on proper care, as recommended in the door’s handbook. Due to timber being a natural product, we are not able to warrant the timber for the final quality of the look or finish. Full details of the warranty areavailablefromwww.bnd.com.au.WarrantyonlyappliestodoorspurchasedandinstalledinAustraliaorNewZealand.Warrantyonlyvalidif warranty conditions are met.



E) B&Dproductshavemanypatentsandregistereddesignsapplicable.F) Details correct at date of publication. Specifications subject to change

without notice.


RECOMMENDED BACKROOM CLEARANCE REqUIREMENTSRearTorsion-680mmplusdoorheight.StandardHeadroom-540mmplusdoorheight.StandardHeadroomwithOpener-1000mmplusdoor height.

NOTE: Sideroomdimensionsincludedooroverlap,ofopening, of 30mm on each side. All measurements are in millimetres and are minimum unless otherwise shown.

Timberpanelresidential sectional garage door


Height Width


Recommended Restricted With Opener Recommended each side

Standard Headroom

Low Headroom

Standard Headroom

Low Headroom

Standard Headroom

Low Headroom

Up to 5285W

Over 5285W

Up to 5285W

Over 5285W

Up to 13m2

Over 13m2

To2850 To5500 375 375 190 200 425 240/250 110 155 195


ProductCode

P4T

descriptionTimber sectional overhead garage door with raised patterns across each panel.

ThedoorismadefromsolidWesternRedCedarandis constructed in the traditional joinery fashion - with stiles, rails and raised pattern inserts.


profile

size rangeAvailableinsizesfrom1870mmto2830mminheightand from 2020mm to 5500mm in width.

features• Tongue&grooveedgepanelprofile.

• Galvanisedhinges.

• Custompatternpositioning-raisedpatternsare evenly spaced over area of door.

• Tailormade-eachdooristailormadetoorder.(Theyarenotmadeupfromamixofstandardsize panels).


•SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.

PANEL PROFILE

PATTERN OR RIB TyPE

MODEL Craftpanel

MODEL CODE P4T

DOOR SURFACE WesternRedCedar



TAPER OPTION Yes

HIGH WIND OPTION No

Craftpanelresidential sectional garage door


ProductCode

P4T

colours/finishesB&DCraftpaneldoorshavetwothickcoatsofSikkensTHB077,naturalcolour,overtheSikkensHLSbase sealer coat for weather protection.


opening.

• Externallock.



B) Craftpaneldoors,inresidentialuse,arecoveredbya12monthwarranty on the structual integrity of the door (excludes salt corrosion), conditional on proper care, as recommended in the door’s handbook. Due to timber being a natural product, we are not able to warrant the timber for the final quality of the look or finish. Full details of the warrantyareavailablefromwww.bnd.com.au.WarrantyonlyappliestodoorspurchasedandinstalledinAustraliaorNewZealand.Warrantyonly valid if warranty conditions are met.




without notice.


RECOMMENDED BACKROOM CLEARANCE REqUIREMENTSRearTorsion-680mmplusdoorheight.StandardHeadroom-540mmplusdoorheight.StandardHeadroomwithOpener-1000mmplusdoor height.

NOTE: Sideroomdimensionsincludedooroverlap,ofopening, of 30mm on each side. All measurements are in millimetres and are minimum unless otherwise shown.

Craftpanelresidential sectional garage door


Height Width


Recommended Restricted With Opener Recommended each side

Standard Headroom

Low Headroom

Standard Headroom

Low Headroom

Standard Headroom

Low Headroom

Up to 5285W

Over 5285W

Up to 5285W

Over 5285W

Up to 13m2

Over 13m2

To2850 To5500 375 375 190 200 425 240/250 110 155 195

speciality doors & tilt fittings - b&d garage doors ... · speciality doors & tilt...

Documents