spec sheet industry 1000hp tot 2200hp

8/3/2019 Spec Sheet Industry 1000HP Tot 2200HP

http://slidepdf.com/reader/full/spec-sheet-industry-1000hp-tot-2200hp 1/29

® 3508 B 746 bkW / 1000 bhp

1800 rpm

Industrial

Image shown may not reflectactual engine

CATERPILLAR ENGINE

SPECIFICATIONSV-8, 4-Stroke-Cycle Diesel

Bore......................................................170.0 mm (6.69 in)Stroke...................................................190.0 mm (7.48 in)Displacement................................... 34.53 L (2,107.15 in3)Aspiration.......................................Turbocharged / SCACCompression Ratio...................................................14.0:1Rotation (from flywheel end).............. CounterclockwiseCapacity for Liquids

Cooling System.................................. 102.7 L (27.1 gal)Lube Oil System (refill)...................... 102.0 L (26.9 gal)

Engine Weight, Net Dry (approximate)..4,309 kg (9,500lb)

FEATURES

EMISSIONS

Meets Tier 1 emission requirements. Tier 1 refers toEPA (U.S.) non-road standards.

SINGLE SOURCE SUPPLIER

Caterpillar:- Casts engine blocks, heads, cylinder liners, andflywheel housings

- Machines critical components- Assembles complete engineOwnership of these manufacturing processesenables Caterpillar to produce high quality,dependable product.

Factory-designed systems built at Caterpillar ISO9001:2000 certified facilities

TESTING

Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model

Every Caterpillar engine is dynamometer testedunder full load to ensure proper engine performance

FULL RANGE OF ATTACHMENTS

Wide range of bolt-on system expansionattachments, factory designed and tested

UNMATCHED PRODUCT SUPPORT OFFEREDTHROUGH WORLDWIDE CATERPILLAR DEALERNETWORK

More than 1,500 dealer outlets.

Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hoursworldwide.Caterpillar parts and labor warrantyPreventive maintenance agreements available forrepair before failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards todetermine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE

For all your industrial power requirements, visitwww.cat-industrial.com.

Out of Production 9 July 2008 1:15 AM



®

3508 B INDUSTRIAL ENGINE

746 bkW (1000 bhp)

STANDARD ENGINE EQUIPMENT

Air Inlet System

Separate circuit aftercooler core, corrosion resistant

coated (air side), air cleaner (dual element withservice indicator), Dual rear mounted turbochargers

Control System

Caterpillar ADEM™ II Electronic Engine Control, RH,with electronic unit injector fuel system (10 amp DCpower required to drive electronic engine controlmodule)

Cooling System

Thermostats and housing, Jacket water pump, geardriven, centrifugal, Connections for radiator cooling

Exhaust System

Exhaust manifold, dry,Dual turbochargers with watercooled bearings,Exhaust outlet 203 mm (8 in) round flange

Flywheels & Flywheel Housings

Flywheel, SAE No. 0, 151 teeth, Flywheel housing,SAE No. 0, SAE standard rotation

Fuel System

Fuel filter, LH spin-on type,Fuel transfer pump,Electronically controlled unit injectors

Instrumentation

No standard instrumentation, Optional, remoteinstrumentation available

Lube System

Crankcase breather, top mounted.

Oil cooler, Oil filler and dipstick,RH.Oil pump, Oil filter, LH, spin-on type.Front sump oil pan, 250 hour change interval.

Mounting System

Trunnion front support

Power Take-Offs

Accessory drive, lower LH, Front housing, two sided

Protection System

ADEM™ II monitoring system to provide customerprogrammable engine.

De-rate strategies to protect against adverseoperating condition.Emergency stop logic inputs provided at 40-pincustomer interface connection.

General

Paint, Caterpillar Yellow,Vibration damper and guard,Lifting eyes

Note

These engines are not configured properly forapplication in hydraulic excavators or front shovels.To obtain proper rating and configuration for

excavators and shovels, please contact yourArea/District Industrial Sales Representative or the3500 Product Group.

2 9 July 2008 1:15 AM



®


746 bkW (1000 bhp)

PERFORMANCE CURVES

IND - A (Continuous) - DM4634-01

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW

Torque N•m BSFC g/kW-hr Fuel Rate L/hr

1800 746 3958 205.1 182.4

1700 733 4120 204.5 178.7

1600 712 4249 206.9 175.6

1500 681 4338 212.5 172.6

1450 661 4353 216 170.2

1400 636 4337 219.3 166.2

1350 608 4302 221.8 160.8

3 9 July 2008 1:15 AM



®


746 bkW (1000 bhp)

PERFORMANCE CURVES


EngineTorque

lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp

Engine Torquelb•ft

BSFC lb/bhp-hr Fuel Rategal/hr

1800 1000 2919 .337 48.2

1700 984 3039 .336 47.2

1600 955 3134 .340 46.4

1500 914 3200 .349 45.6

1450 886 3211 .355 45.0

1400 853 3199 .361 43.9

1350 815 3173 .365 42.5

4 9 July 2008 1:15 AM



®


746 bkW (1000 bhp)

RATINGS AND CONDITIONS

IND - A (Continuous) Continuous heavy duty servicewhere the engine is operated at maximum power

and speed up to 100% of the time withoutinterruption or load cycling. Time at full load can beup to 100% of the duty cycle. Typical serviceexamples are: pumping, ventilation, customer specs.

Engine Performance Engine performance iscorrected to inlet air standard conditions of 99 KPA

(29.31 IN HG) dry barometer and 25 deg C (77 deg F)temperature. These values correspond to thestandard atmospheric pressure and temperature asshown in SAE J1995.

Performance measured using a standard fuel withfuel gravity of 35 degrees API having a lowerheating value of 42,780 KJ/KG (18,390 BTU/LB) whenused at 29 DEG (84.2 DEG F) where the density is838.9 G/L (7.001 LB/US GAL).

The corrected performance values shown forCaterpillar engines will approximate the valuesobtained when the observed performance data iscorrected to SAE J1995, ISO 3046-2 and 8665 and2288 and 9249 and 1585, EEC 80/1269 and DIN 70020

standard reference conditions.

Engine Dimensions

(1) Length 2136.5 mm (84.11 in)

(2) Width 1703.0 mm (67.05 in)

(3) Height 1858.4 mm (73.17 in)

Note: Do not use for installation design.See general dimension drawings fordetail (Drawing # 2002730 ).

Performance Number: DM4634-01

Feature Code: 508DO02 Arr. Number: 1918408

Materials and specifications are subject to change without notice.

12762775

© 2008 Caterpillar

All rights reserved.

The International System of Units (SI) is used in this publication.

CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,"Caterpillar Yellow," and the POWER EDGE trade dress, as well as

corporate and product identity used herein, are trademarks ofCaterpillar and may not be used without permission.



® 3508 B 820 bkW / 1100 bhp

1800 rpm

Industrial


CATERPILLAR ENGINE


Bore......................................................170.0 mm (6.69 in)Stroke...................................................190.0 mm (7.48 in)Displacement................................... 34.53 L (2,107.15 in3)Aspiration.......................................Turbocharged / SCACCompression Ratio...................................................14.0:1Rotation (from flywheel end).............. CounterclockwiseCapacity for Liquids


Engine Weight, Net Dry (approximate)..4,309 kg (9,500lb)

FEATURES

EMISSIONS






TESTING







Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hoursworldwide.Caterpillar parts and labor warrantyPreventive maintenance agreements available forrepair before failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards todetermine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE





®


820 bkW (1100 bhp)


Air Inlet System



Control System


Cooling System


Exhaust System

Exhaust manifold, dry,Dual turbochargers with watercooled bearings,Exhaust outlet 203 mm (8 in) round flange

Flywheels & Flywheel Housings

Flywheel, SAE No. 0, 151 teeth, Flywheel housing,SAE No. 0, SAE standard rotation

Fuel System

Fuel filter, LH spin-on type,Fuel transfer pump,Electronically controlled unit injectors

Instrumentation


Lube System

Crankcase breather, top mounted.

Oil cooler, Oil filler and dipstick,RH.Oil pump, Oil filter, LH, spin-on type.Front sump oil pan, 250 hour change interval.

Mounting System


Power Take-Offs


Protection System

ADEM™ II monitoring system to provide customerprogrammable engine.

De-rate strategies to protect against adverseoperating condition.Emergency stop logic inputs provided at 40-pincustomer interface connection.

General


Note

These engines are not configured properly forapplication in hydraulic excavators or front shovels.To obtain proper rating and configuration for

excavators and shovels, please contact yourArea/District Industrial Sales Representative or the3500 Product Group.

2 9 July 2008 1:16 AM



®


820 bkW (1100 bhp)

PERFORMANCE CURVES

IND - C (Intermittent) - DM4636-01

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


1800 820 4350 203.2 198.6

1700 806 4528 202.5 194.6

1600 783 4670 205.2 191.4

1500 749 4769 211.2 188.5

1450 727 4785 215 186.2

1400 699 4767 218.7 182.2

1350 669 4729 221.6 176.6

3 9 July 2008 1:16 AM



®


820 bkW (1100 bhp)

PERFORMANCE CURVES


EngineTorque

lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp



1800 1100 3208 .334 52.5

1700 1081 3340 .333 51.4

1600 1049 3444 .337 50.6

1500 1004 3517 .347 49.8

1450 974 3529 .353 49.2

1400 937 3516 .360 48.1

1350 896 3488 .364 46.7

4 9 July 2008 1:16 AM



®


820 bkW (1100 bhp)


IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic. The

power and speed capability of the engine can beutilized for one uninterrupted hour followed by onehour of operation at or below IND - A. Time at fullload is not to exceed 50% of the duty cycle. Typicalservice examples are: agricultural tractors,harvesters and combines, off highway trucks, firepump application power, blast hole drills, rockcrushers and wood chippers with high torque rise,and oil field hosting.






Engine Dimensions

(1) Length 2136.5 mm (84.11 in)

(2) Width 1703.0 mm (67.05 in)

(3) Height 1858.4 mm (73.17 in)





12762778

© 2008 Caterpillar







® 3512 B 1231 bkW / 1650 bhp

1800 rpm

Industrial


CATERPILLAR ENGINE


Aspiration.......................................Turbocharged / SCACCompression Ratio...................................................14.0:1Rotation (from flywheel end).............. CounterclockwiseCapacity for Liquids

Cooling SystemLube Oil Capacity (refill).....................151.0 L (39.9 gal)

Engine Weight, Net Dry (approximate)6,078 kg (13,400lb)Bore......................................................170.0 mm (6.69 in)Stroke...................................................190.0 mm (7.48 in)Displacement..................................... 51.8 L (3,161.03 in3)

FEATURES

EMISSIONS






TESTING







Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hoursworldwide.Caterpillar parts and labor warranty.Preventive maintenance agreements available forrepair before failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards todetermine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE





®


1231 bkW (1650 bhp)


Air Inlet System



Control System

Caterpillar ADEM II Electronic Engine Control, RH,with electronic unit injector fuel system (10 amp DCpower required to drive electronic engine controlmodule)

Cooling System


Exhaust System

Exhaust manifold, dry, Dual turbochargers withwatercooled bearings, Exhaust outlet 292 mm (12 in)round flange

Flywheels and Flywheel Housings

Flywheel , SAE No. 0, 151 teeth, Flywheel housing,SAE No. 0, SAE standard rotation

General

Paint, Caterpillar Yellow,Vibration damper,Lifting eyes

Fuel System

Fuel filter, LH spin-on type, Fuel transfer pump,Electronically controlled unit injectors

Instrumentation


Lube System

Crankcase breather, top mounted, Oil cooler, Oil

filler and dipstick, RH, Oil pump, Oil filter, LH,spin-on type, Front sump oil pan, 250 hour changeinterval

Mounting System


Power Take-Offs


Protection System

ADEM II monitoring system to provide customerprogrammable engine, De-rate strategies to protect

against adverse operating condition, Emergencystop logic inputs provided at 40-pin customerinterface connection

Starting System

Dual 24V electric starting motor, LH, unwired

Note

These engines are not configured properly forapplication in hydraulic excavators or front shovels.To obtain proper rating and configuration forexcavators and shovels, please contact yourArea/District Industrial Sales Representative or the3500 Product Group.

2 9 July 2008 1:23 AM



®


1231 bkW (1650 bhp)

PERFORMANCE CURVES


TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


1800 1231 6528 207.3 304.0

1700 1210 6795 204.4 294.7

1600 1174 7008 203.6 285.0

1500 1124 7155 204.9 274.5

1450 1090 7180 206 267.7

1400 1049 7153 207 258.8

1350 1003 7095 207.8 248.4

3 9 July 2008 1:23 AM



®


1231 bkW (1650 bhp)

PERFORMANCE CURVES


EngineTorque

lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp



1800 1650 4815 .341 80.3

1700 1622 5012 .336 77.9

1600 1575 5169 .335 75.3

1500 1507 5277 .337 72.5

1450 1462 5296 .339 70.7

1400 1406 5276 .340 68.4

1350 1345 5233 .342 65.6

4 9 July 2008 1:23 AM



®


1231 bkW (1650 bhp)









Engine Dimensions

(1) Length 2830.2 mm (111.42 in)

(2) Width 1988.0 mm (78.27 in)

(3) Height 1847.7 mm (72.74 in)





12767524

© 2008 Caterpillar







® 3516 B 1492 bkW / 2000 bhp

1800 rpm

Mobile Equipment


CATERPILLAR ENGINE


Bore....................................................... 170.0 mm (6.69 in)Stroke.................................................... 190.0 mm (7.48 in)Displacement....................................... 69.0 L (4,210.64 in3)Aspiration..........................................Turbocharged / SCACCompression Ratio.................................................... 14.0:1Rotation (from flywheel end)....................CounterclockwiseCapacity for Liquids

Cooling System.....................................233.0 L (61.6 gal)Lube Oil System (refill)......................... 181.7 L (48.0 gal)

Engine Weight, Net Dry (approximate)

FEATURES

EMISSIONS



Caterpillar:- Casts engine blocks, heads, cylinder liners, and

flywheel housings

- Machines critical components- Assembles complete engineOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.


TESTING


Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.


Wide range of bolt-on system expansion attachments,factory designed and tested



Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hours worldwide.Caterpillar parts and labor warranty.Preventive maintenance agreements available for repairbefore failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE


30 September 2006 2:06 AMSS-003468.pdf



®


1492 bkW (2000 bhp)


Air Inlet System


coated (air side), Four turbochargers, center mounted

Control System


Cooling System

Thermostats and housingJacket water pump, gear driven, centrifugalConnections for radiator cooling

Exhaust System

Exhaust manifold, dry, Four turbochargers withwatercooled bearings, Two exhaust outlets 203 mm (8in) round flange


Flywheel, SAE No. 0, 151 teethFlywheel housing, SAE No. 0SAE standard rotation

Fuel System

Fuel filter, LH spin-on typeFuel transfer pumpElectronically controlled unit injectors

Instrumentation


Lube System

Crankcase breather, top mounted

Oil coolerOil filler and dipstick, RHOil pumpOil filter, LH, spin-on typeFront sump oil pan, 250 hour change interval

Mounting System


Power Take-Offs


Protection System

ADEM™ II monitoring system to provide customerprogrammable engine, De-rate strategies to protectagainst adverse operating condition, Emergency stoplogic inputs provided at 40-pin customer interfaceconnection

Starting System


General

Paint, Caterpillar YellowVibration damperLifting eyes

Note

These engines are not configured properly forapplication in hydraulic excavators or front shovels. Toobtain proper rating and configuration for excavatorsand shovels, please contact your Area/District IndustrialSales Representative or the 3500 Product Group.

2 30 September 2006 2:06 AMSS-003468.pdf



®


1492 bkW (2000 bhp)

PERFORMANCE CURVES


TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


1800 1492 7913 213.7 380.0

1700 1466 8237 207.7 363.0

1600 1423 8495 204.2 346.5

1500 1363 8674 203.3 330.2

1450 1322 8704 203.8 321.1

1400 1271 8671 205.1 310.8

1350 1216 8601 207 300.1




®


1492 bkW (2000 bhp)

PERFORMANCE CURVES


EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp



1800 2000 5836 .351 100.4

1700 1966 6075 .341 95.9

1600 1909 6266 .336 91.5

1500 1827 6398 .334 87.2

1450 1772 6420 .335 84.8

1400 1705 6395 .337 82.1

1350 1631 6344 .340 79.3




®


1492 bkW (2000 bhp)


IND - A (Continuous) Continuous heavy duty servicewhere the engine is operated at maximum power and

speed up to 100% of the time without interruption orload cycling. Time at full load can be up to 100% of theduty cycle. Typical service examples are: pumping,ventilation, customer specs.

Engine Performance Engine performance is correctedto inlet air standard conditions of 99 KPA (29.31 IN HG)

dry barometer and 25 deg C (77 deg F) temperature.These values correspond to the standard atmosphericpressure and temperature as shown in SAE J1995.

Performance measured using a standard fuel with fuelgravity of 35 degrees API having a lower heating valueof 42,780 KJ/KG (18,390 BTU/LB) when used at 29DEG (84.2 DEG F) where the density is 838.9 G/L(7.001 LB/US GAL).

The corrected performance values shown for Caterpillarengines will approximate the values obtained when theobserved performance data is corrected to SAE J1995,ISO 3046-2 and 8665 and 2288 and 9249 and 1585,EEC 80/1269 and DIN 70020 standard referenceconditions.

Engine Dimensions

(1) Length 2982.6 mm (117.42 in)

(2) Width 1522.2 mm (59.93 in)

(3) Height 1937.9 mm (76.3 in)

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2002738 ).


Feature Code: 516DO02


7992735

© 2006 Caterpillar



CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE™ trade dress, as well as corporate and product identityused herein, are trademarks of Caterpillar and may not be used without

permission.SS-003468.pdf



® 3516 B 1641 bkW / 2200 bhp

1800 rpm

Mobile Equipment


CATERPILLAR ENGINE


Bore....................................................... 170.0 mm (6.69 in)Stroke.................................................... 190.0 mm (7.48 in)Displacement....................................... 69.0 L (4,210.64 in3)Aspiration..........................................Turbocharged / SCACCompression Ratio.................................................... 14.0:1Rotation (from flywheel end)....................CounterclockwiseCapacity for Liquids

Cooling System.....................................233.0 L (61.6 gal)Lube Oil System (refill)......................... 181.7 L (48.0 gal)

Engine Weight, Net Dry (approximate)

FEATURES

EMISSIONS



Caterpillar:- Casts engine blocks, heads, cylinder liners, and

flywheel housings

- Machines critical components- Assembles complete engineOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.


TESTING


Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.


Wide range of bolt-on system expansion attachments,factory designed and tested



Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hours worldwide.Caterpillar parts and labor warranty.Preventive maintenance agreements available for repairbefore failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE


30 September 2006 2:06 AMSS-003469.pdf



®


1641 bkW (2200 bhp)


Air Inlet System


coated (air side), Four turbochargers, center mounted

Control System


Cooling System

Thermostats and housingJacket water pump, gear driven, centrifugalConnections for radiator cooling

Exhaust System

Exhaust manifold, dry, Four turbochargers withwatercooled bearings, Two exhaust outlets 203 mm (8in) round flange


Flywheel, SAE No. 0, 151 teethFlywheel housing, SAE No. 0SAE standard rotation

Fuel System

Fuel filter, LH spin-on typeFuel transfer pumpElectronically controlled unit injectors

Instrumentation


Lube System

Crankcase breather, top mounted

Oil coolerOil filler and dipstick, RHOil pumpOil filter, LH, spin-on typeFront sump oil pan, 250 hour change interval

Mounting System


Power Take-Offs


Protection System

ADEM™ II monitoring system to provide customerprogrammable engine, De-rate strategies to protectagainst adverse operating condition, Emergency stoplogic inputs provided at 40-pin customer interfaceconnection

Starting System


General

Paint, Caterpillar YellowVibration damperLifting eyes

Note

These engines are not configured properly forapplication in hydraulic excavators or front shovels. Toobtain proper rating and configuration for excavatorsand shovels, please contact your Area/District IndustrialSales Representative or the 3500 Product Group.




®


1641 bkW (2200 bhp)

PERFORMANCE CURVES


TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


1800 1641 8703 213 416.6

1700 1613 9060 206.7 397.5

1600 1566 9343 203.3 379.4

1500 1499 9540 202.8 362.2

1450 1454 9573 203.5 352.7

1400 1398 9537 204.8 341.3

1350 1337 9460 206.4 329.0




®


1641 bkW (2200 bhp)

PERFORMANCE CURVES


EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp



1800 2200 6419 .350 110.1

1700 2163 6682 .340 105.0

1600 2099 6891 .334 100.2

1500 2010 7036 .333 95.7

1450 1949 7061 .335 93.2

1400 1875 7034 .337 90.2

1350 1793 6977 .339 86.9




®


1641 bkW (2200 bhp)


IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic. The power

and speed capability of the engine can be utilized forone uninterrupted hour followed by one hour ofoperation at or below IND - A. Time at full load is not toexceed 50% of the duty cycle. Typical serviceexamples are: agricultural tractors, harvesters andcombines, off highway trucks, fire pump applicationpower, blast hole drills, rock crushers and woodchippers with high torque rise, and oil field hosting.

Engine Performance Engine performance is correctedto inlet air standard conditions of 99 KPA (29.31 IN HG)

dry barometer and 25 deg C (77 deg F) temperature.These values correspond to the standard atmosphericpressure and temperature as shown in SAE J1995.

Performance measured using a standard fuel with fuelgravity of 35 degrees API having a lower heating valueof 42,780 KJ/KG (18,390 BTU/LB) when used at 29DEG (84.2 DEG F) where the density is 838.9 G/L(7.001 LB/US GAL).

The corrected performance values shown for Caterpillarengines will approximate the values obtained when theobserved performance data is corrected to SAE J1995,ISO 3046-2 and 8665 and 2288 and 9249 and 1585,EEC 80/1269 and DIN 70020 standard referenceconditions.

Engine Dimensions

(1) Length 2982.6 mm (117.42 in)

(2) Width 1522.2 mm (59.93 in)

(3) Height 1937.9 mm (76.3 in)

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2002738 ).


Feature Code: 516DO02


7992740

© 2006 Caterpillar



CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE™ trade dress, as well as corporate and product identityused herein, are trademarks of Caterpillar and may not be used without

permission.SS-003469.pdf



®3512

Industrial Engine

1119 bkW/1500 bhp @ 1800 rpm


CATERPILLAR ENGINE


Bore......................................................170.0 mm (6.69 in)Stroke...................................................190.0 mm (7.48 in)Displacement..................................... 51.8 L (3,161.03 in3)Aspiration.............................Turbocharged / AftercooledCompression Ratio...................................................13.0:1Rotation (from flywheel end).............. CounterclockwiseCapacity for Liquids


Engine Weight, Net Dry (approximate)6,078 kg (13,400lb)

FEATURES

EMISSIONS

Non-certified rating.


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings



TESTING







Caterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine.99.7% of parts orders filled within 24 hoursworldwide.Caterpillar parts and labor warranty.Preventive maintenance agreements. available forrepair before failure options.Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards todetermine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

WEB SITE


12 February 2010 1:35 AM



® 3512Industrial Engine

1119 bkW/1500 bhp @ 1800 rpmSTANDARD ENGINE EQUIPMENT

Air Inlet System

Aftercooler core, corrosion resistant coated (air side)

Air cleaner, regular duty with service indicators,Turbocharger, rear mounted, jacket wateraftercooled

Control System

Governor, RH, 3161 with self contained synthetic oilsump.Air-fuel ratio control, mechanical speed control,without torque control, Governor control, positivelocking.

Cooling System

Thermostats and housing for conventional coreradiator, Jacket water pump, gear driven, centrifugal

Exhaust System

Exhaust manifold, dry


Flywheel, SAE No. 00, 183 teeth, Flywheel housing,SAE No. 00

Fuel System

Fuel filter, with service indicators, cartridge typewith RH service, Fuel transfer pump

Instrumentation

Instrument Panel, RH.

Engine oil pressure gauge, Fuel pressure gauge, Oilfilter differential gauge, Jacket water temperaturegauge. Service meter, electric, Tachometer.

Lube System

Crankcase breather, top mounted, Oil cooler, Oilfiller and dipstick, RH, Oil pump, Oil filter, cartridgetype with RH service, Shallow oil pan

Mounting System

Rails, mounting, engine length, 254 mm (10 in),industrial-type, C-channel.

Power Take-Offs

Accessory drive, upper RH, Front housing, singlesided

Protection System

Junction box, Manual shutoff, RH, Safety shutoffprotection, energized to shutdown, Low oil pressure,low idle 69 kPa (10 psi); high idle 207 kPa (30 psi),Water temperature, Overspeed, 3161 governorsolenoid energized to shutdown

Starting System

Starting switch

General


2 12 February 2010 1:35 AM




1119 bkW/1500 bhp @ 1800 rpmPERFORMANCE CURVES

IND - C (Intermittent) - TM3378-07

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


1800 1119 5934 212.6 283.5

1750 1100 6000 213.1 279.1

1700 1077 6048 213.5 274.0

1650 1052 6088 213.8 268.1

1600 1026 6125 213.9 261.8

1550 1000 6158 214 254.9

1500 971 6182 213.9 247.5

1450 942 6202 213.8 239.8

1400 911 6210 213.9 232.0

1350 876 6199 215.1 224.7

1300 841 6177 217.7 218.2

3 12 February 2010 1:35 AM




1119 bkW/1500 bhp @ 1800 rpmRATINGS AND CONDITIONS








Engine Dimensions

(1) Length 2675.8 mm

(2) Width 1703.0 mm

(3) Height 1719.6 mm


Performance Number: TM3378-07

Feature Code: 512DI01 Arr. Number: 4W0282


15476376

© 2010 Caterpillar



CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,

spec sheet industry 1000hp tot 2200hp

Documents