spec #422-1017 state of minnesota october, … 24 x x 235tl 550941102 730892026 x x 54" x x x...
TRANSCRIPT
SPEC #422-1017
T-628(5)
Tractors, Ag Type Factory Attach.
STATE OF MINNESOTA
PRICE PAGE
(Typed Response Required)
October, 2017
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip
Phone #:
Toll Free #:
Fax #:
Email Address: [email protected]
Spec # Information Requested Answer
1.0 Tractor Catalog Section Price List Title: New Holland Compact
Loaders
Date & I.D. of Price List 1/1/2018 U.S. NO. 17-46A
Percentage Discount to be applied to Price List 20%
1.1 Price for manuals, (service, parts, repair, and operations) NO BID
1.2 Price for set of fluid and air filters N/A
2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONS
Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc.
(Specify years, miles or hours extended term covers.)
2.1 ______________________________________________ NO BID
2.2 ______________________________________________ NO BID
3.0 INSTALLATION - PER HOUR 105.00$
Installation services may be requested on an "as needed" basis.
See Special Terms and Conditions
4.0 NEW EQUIPMENT RENTAL PROGRAM
If rental programs are available on the new equipment offered, with the option to
purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee
paid by the purchaser that will be applied to the purchase price. See Solicitation Special
Terms & Conditions.
Hourly Rental Rate: N/A
Weekly Rental Rate: N/A
Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance
charges are applicable for the actual rental term only,
state the actual interest rate here: ________________
5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM
See Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
6.0 PERCENT DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES
See Special Terms and Conditions 0%
7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo, MN 55313
Delivery price per loaded mile. $2.50
See Special Terms and Conditions - DELIVERY CHARGES (No flat rate allowed)
Trueman Welters
Seth Strehler
763-682-6141
Version of Excel used:
1600 Highway 55 East
Buffalo, MN 55313
763-682-2200
IMPLEMENTS - "COMPACT LOADERS" INDEX
EQUIPMENT DESCRIPTION
LATEST
REVISION
PAGE
NUMBER
Index 01/01/18 1
Compact Loader Ordering Chart 01/01/18 2
NEW
Loaders
100LC for WORKMASTER 25S Sub Compact
01/01/18
3
NEW 200LC for WORKMASTER 25 (Tier 4B) 01/01/18 4
140TLA2 for WORKMASTER 35/40 (Tier 4B)
140TL for WORKMASTER 33/37 (Tier 4B)
01/01/18 5
235TLA for Boomer 24 01/01/18 11
250TLA2 for Boomer 35/40 Rops & 40 Cab (Tier 4B)
250TLA1 for Boomer 33/37 (Tier 4B)
250TLA1 for Boomer 37 Cab (Tier 4B)
01/01/18 14
260TLA2 for Boomer 45/50/55 Rops & Cab (Tier 4B)
260TLA1 for Boomer 41/47 (Tier 4B)
260TLA1 for Boomer 41/47 Cab (Tier 4B)
01/01/18 20
250TLA for Boomer 3000 Series (Tier 3)
250TLA for Boomer 45D/50D (Tier 3)
250TLA for Boomer 46D/54D (Tier 4B)
01/01/18 26
Page 1 of 27
Loader Ordering and Pricing Information
Models Used On
Slim Mounts
ROPS
Cab
2wd
4WD
Model
Technical
Type
Reference
Number
Loader Arms
Face Plate
Bucket
Loader
Mount
Grill Guard
Valve
Factory Data
US Price List
Quick
Attach
Pin
On
NEW
WORKMASTER 25S Subcompact X X 100LC 550990005 713778016 X X 50" X X 9002272P22 $2,771.00
WORKMASTER 33/37 (Tier 4B) X X 140TL 550941111 713740016 X X 68" X 9004212P34 $5,137.00
WORKMASTER 33 Fast Pick (Tier 4B) X X 140TL 550941111 X0279XX X X 68" X 9004127P88 $5,034.00
WORKMASTER 37 Fast Pick (Tier 4B) X X 140TL 550941111 X0280XX X X 68" X 9004127P88 $5,034.00
NEW
WORKMASTER 25 (Tier 4B) X X 200LC 550990004 713778006 X X 66" X X X 9003306P24 $4,032.00
WORKMASTER 35/40 (Tier 4B) X X 140TLA2 550941119 713740026 X X 68" X 9004212P34 $5,137.00
WORKMASTER 35 Fast Pick (Tier 4B) X X 140TLA2 550941119 X0337XX X X 68" X 9004127P88 $5,034.00
WORKMASTER 40 Fast Pick (Tier 4B) X X 140TLA2 550941119 X0338XX X X 68" X 9004127P88 $5,034.00
Boomer 24 X X 235TL 550941102 730892026 X X 54" X X X 9003357P90 $4,095.00
Boomer 24 Fast Pick X X 235TL 550941102 X0283XX X X 54" X X X 9003290P66 $4,013.00
Boomer 33/37 ROPS (Tier 4B) X X
X 250TLA1 550941103 727099016 X X
68" X
9004983P96 $6,078.00
Boomer 37 CAB (Tier 4B)
X
X
X
250TLA1
Cab Non‐ CVT
550941115
727099026
X
X
68"
X
9004983P96
$6,078.00
Boomer 37 CAB Fast Pick (Tier 4B)
X
X
X
250TLA1
Cab Non‐
CVT
550941115
X0275XX
X
X
68"
X
9004883P92
$5,956.00
Boomer 41/47 ROPS (Tier 4B) X X
X 260TLA1 550941104 727100006 X X
72" X
9005179P94 $6,317.00
Boomer 47 ROPS Fast Pick (Tier 4B) X X
X 260TLA1 550941104 X0282XX X X
72" X
9005076P62 $6,191.00
Boomer 41/47 CAB (Tier 4B)
X
X
X
260TLA1
Cab Non‐ CVT
550941116
727100026
X
X
72"
X
9005179P94
$6,317.00
Boomer 47 CAB Fast Pick (Tier 4B)
X
X
X
260TLA1
Cab Non‐ CVT
550941116
X0276XX
X
X
72"
X
9005076P62
$6,191.00
Boomer 35/40 ROPS & 40 Cab (Tier 4B) X X X
X 250TLA2 550941121 727099036 X X
68" X
9004983P96 $6,078.00
Boomer 40 CAB Fast Pick (Tier 4B)
X
X
X
250TLA2
550941121
X0331XX
X
X
68"
X
9004883P92
$5,956.00
Boomer 45/50/55 ROPS & Cab (Tier 4B) X X X
X 260TLA2 550941122 727100036 X X
72" X
9005179P94 $6,317.00
Boomer 50 ROPS Fast Pick (Tier 4B) X X
X 260TLA2 550941122 X0332XX X X
72" X
9005076P62 $6,191.00
Boomer 50 CAB Fast Pick (Tier 4B)
X
X
X
260TLA2
550941122
X0333XX
X
X
72"
X
9005076P62
$6,191.00
Boomer CVT 3040/3045/3050 Serial ZDMB11925 & above
(MMV under Cab)
Boomer 46D/54D
Boomer 45D/50D
X
X
X
X
250TLA
550941098
449324026
X
X
72"
9004387P00
$5,350.00
Boomer 54D Fast Pick
X
X
X
X
250TLA
550941098
X0281XX
X
X
72"
9004299P26
$5,243.00
Boomer CVT 3040/3045/3050 Serial ZDMB11925 & above
(MMV under Cab)
Boomer 46D/54D
Boomer 45D/50D
X
X
X
X
250TLA1
CVT
Tier IV
550941114
449324326
X
X
72"
X
9005179P94
$6,317.00
Page 2 of 27
Order Number
Descriptio n Factory Data
U.S.A List Price
717746006 BALLAST BOX 500 LB MAX 9000231P07 $281.79
717747006 BALLAST BOX 1000 LB MAX 9000311P60 $380.00
717748006 BALLAST BOX 1500 LB MAX 9000400P16 $488.00
47464281 Conversion Kit for 110Tl Loader to fit WORKMASTER 35/40
Order through service parts
LDR10418914 MMV relocation kit ‐ 235TL (Serial YEWLY0117 & below) to fit Boomer 24
Order through service parts
Note: Ballast box or rear implement are recommended for optimum loader
performance
-CP9V 1
Standard Equipment
TRACTOR APPLICATIONS: Max Lift Height @ Pivot Pin (in.): 72
Current New Holland Compact Models: Clearance w/Bucket Dumped (in.): 51
- WORKMASTER™ 25S (ONLY) Reach at Maximum Height (in.): 23.4
Maximum Dump Angle (deg.): 46
NOTE: Maximum Rollback Angle (deg.): 28
Important Compatibility Information Digging Depth (in.): 4.6
- A configured model 100LC is ONLY Height in Carry Position (in.): 41.5
compatible with the WORKMASTER
25S Subcompact tractor Bucket Size and Capacity
- To assure proper performance, see - Width: 50 Inch
Operator's Manual for recommended - Capacity (cu. ft.)
counterweighting Struck: 5.3
Heaped: 7.4
Loader Specifications:
Cycle Times (sec)
Lift Capacity to Maximum Height - Raise: 3.6
- @ Bucket Pivot Pins (lbs.): 1005 - Lower: 2.1
- @ 500mm forward (lbs.): 693 - Bucket Dump: 2.3
Lift Capacity to 1500 mm Height - Bucket Rollback: 1.5
- @ Bucket Pivot Pins (lbs.): 1142
- @ 500mm forward (lbs.): 823 Approx. Weight w/ Bucket (lbs.): 363
Breakout Force Loader specifications may vary based
- @ Bucket Pivot Pins (lbs.): 2078 on tractor model, hydraulic system, tire
- @ 500mm forward (lbs.): 1426 size, etc.
*NOTE: The 100LC DOES NOT come
with mid mount valve, couplers or
joystick as these items are
standard on the WORKMASTER™ 25S
WARRANTY
New Holland Standard Warranty Applies
Page 3 of 27
-CP9V 01 0030 000 01-JAN-18
100LC LOADER FOR WM25S SUBCOMPACT (ONLY)
US PRICE LIST
-CP9V 2
Standard Equipment
TRACTOR APPLICATIONS: Max Lift Height @ Pivot Pin (in.): 94.3
Current New Holland Compact Models: Clearance w/Bucket Dumped (in.): 64.3
- WORKMASTER™ 25 (ONLY) Reach at Maximum Height (in.): 18.2
Maximum Dump Angle (deg.): 52
NOTE: Maximum Rollback Angle (deg.): 41
Important Compatibility Information Digging Depth (in.): 4.3
- A configured model 200LC is ONLY Height in Carry Position (in.): 51.3
compatible with the WORKMASTER
25 compact tractor. It is NOT Bucket, Type Size and Capacity
compatible with WORKMASTER 33/37 - Quick Attach Design
(T4B) or WORKMASTER 35/40 (T4B) - Width: 66 Inch
compact tractors - Capacity (cu. ft.)
- To assure proper performance, see Struck: 9.5
Operator's Manual for recommended Heaped: 14.5
counterweighting
Cycle Times (sec)
Loader Specifications: - Raise: 3.1
- Lower: 2.0
Lift Capacity to Maximum Height - Bucket Dump: 1.7
- @ Bucket Pivot Pins (lbs.): 1600 - Bucket Rollback: 2.7
- @ 500mm forward (lbs.): 1214
Lift Capacity to 1500 mm Height Approx. Weight w/ Bucket (lbs.): 1819
- @ Bucket Pivot Pins (lbs.): 1955
- @ 500mm forward (lbs.): 1508 Loader specifications may vary based
on tractor model, hydraulic system, tire
Breakout Force size, etc.
- @ Bucket Pivot Pins (lbs.): 2637
- @ 500mm forward (lbs.): 1926 *NOTE: The 200LC comes
with a mid mount valve and couplers.
WARRANTY
New Holland Standard Warranty Applies
-CP9V 02 0030 000 01-JAN-18
Page 4 of 27
200LC LOADER FOR WM25 (ONLY)
US PRICE LIST
-CP9J 07
140TLA2 FARM LOADER WM35/40 (T4B ONLY)
US PRICE LIST
Page 5 of 27 -CP9J 07 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS: Cycle times:
Current New Holland Compact Models: Raising: 3.8 sec
- WORKMASTER™ 35 (T4B ONLY) Lowering: 1.7 sec
- WORKMASTER™ 40 (T4B ONLY) Lowering (float): 2.2 sec
Bucket dumping: 2.2 sec
NOTE: Bucket roll back: 1.7 sec
Important Compatibility Information
- A configured model 140TLA2 is NOT Bucket Dimensions:
compatible with the WORKMASTER Width: 68.4 in / 1736.7 mm
35/40 T3 or WM33/37 T4B Tractors Depth: 22.0 in / 558.8 mm
- To assure proper performance, see Height: 21.4 in / 542.9 mm
Operator's Manual for recommended Length: 31.0 in / 787.4 mm
counterweighting Weight: 260 (lbs.) / 118 (kg)
Loader Specifications: (PRELIMINARY) Bucket Capacities:
Max lift height (under level bucket): Struck:
- 91.5 in / 2324 mm 68" Bucket = .43 cu yd.
Clearance with bucket dumped: Heaped:
- 64 in / 1626 mm 68" Bucket = .53 cu yd.
Max dump angle: 48 °
Reach with bucket on ground: Loader specifications may vary based
- 74.0 in / 1879.6 mm on tractor model, hydraulic system, tire
Bucket roll back angle: 30.4 ° size, etc.
Lift capacity: *NOTE: The 140TLA2 DOES NOT come
@ bucket pivot pin, max height: with mid mount valve, couplers or
- 1250 (lbs.) / 567 (kg) joystick as these items are now
@ 500 mm forward, max height: standard on the WORKMASTER™
- 1100 (lbs.) / 499 (kg) 35/40 T4B tractors. If a mid mount
@ bucket pivot pin, 1500 mm height: valve, coupler or joystick is needed,
- 1500 (lbs.) / 680 (kg) these items must be ordered from
Breakout force: parts.
@ bucket pivot pin:
- 2700 (lbs.) / 1225 (kg) WARRANTY
@ 500 mm forward: New Holland Standard Warranty Applies
- 1900 (lbs.) / 862 (kg)
-CP9J 07
140TLA2 FARM LOADER WM35/40 (T4B ONLY)
US PRICE LIST
Page 6 of 27 -CP9J 07 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0341XX WM 35 Gear R1 Fast Pick
Fast Pick 140TLA2 Loader for WORKMASTER 35 ROPS (T4B)
Package Contains:
- Base 140TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900084P46) ($103.00)
X0337XX WM 35 Gear R4 Fast Pick
Fast Pick 140TL2 Loader for WORKMASTER 35 ROPS (T4B)
Package Contains:
- Base 140TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900084P46) ($103.00)
X0338XX WM 40 HST R4 Fast Pick
Fast Pick 140TLA2 Loader for WORKMASTER 40 ROPS (T4B)
Package Contains:
- Base 140TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900084P46) ($103.00)
-CP9J 07
140TLA2 FARM LOADER WM35/40 (T4B ONLY)
US PRICE LIST
Page 7 of 27 -CP9J 07 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762006 LOADER MOUNTS/HARDWARE, A
CONVERSION KIT.
This kit allows a 140TL loader (713740016) for
WORKMASTER 33/37 tractors to be used on
WORKMASTER 35/40 T4B tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
300 LB 9000615P00 $750.00
-CP9J 06
140TLA FARM LOADER WM33/37 (T4B ONLY)
US PRICE LIST
Page 8 of 27 -CP9J 06 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS: Cycle times:
Current New Holland Compact Models: Raising: 3.8 sec
- WORKMASTER™ 33 (T4B) Lowering: 1.7 sec
- WORKMASTER™ 37 (T4B) Lowering (float): 2.2 sec
Bucket dumping: 2.2 sec
NOTE: Bucket roll back: 1.7 sec
Important Compatibility Information
- A configured model 140TLA is NOT Bucket Dimensions:
compatible with the WORKMASTER Width: 68.4 in / 1736.7 mm
35/40 T3 or T4B Tractors Depth: 22.0 in / 558.8 mm
- To assure proper performance, see Height: 21.4 in / 542.9 mm
Operator's Manual for recommended Length: 31.0 in / 787.4 mm
counterweighting Weight: 260 (lbs.) / 118 (kg)
Loader Specifications: Bucket Capacities:
Max lift height (under level bucket): Struck:
- 91.5 in / 2324 mm 68" Bucket = .43 cu yd.
Clearance with bucket dumped: Heaped:
- 64 in / 1626 mm 68" Bucket = .53 cu yd.
Max dump angle: 48 °
Reach with bucket on ground: Loader specifications may vary based
- 74.0 in / 1879.6 mm on tractor model, hydraulic system, tire
Bucket roll back angle: 30.4 ° size, etc.
Lift capacity: *NOTE: The 140TLA DOES NOT come
@ bucket pivot pin, max height: with mid mount valve, couplers or
- 1250 (lbs.) / 567 (kg) joystick as these items are now
@ 500 mm forward, max height: standard on the WORKMASTER™
- 1100 (lbs.) / 499 (kg) 33/37 tractors. If a mid mount valve,
@ bucket pivot pin, 1500 mm height: coupler or joystick is needed, these
- 1500 (lbs.) / 680 (kg) items must be ordered from parts.
Breakout force:
@ bucket pivot pin: WARRANTY
- 2700 (lbs.) / 1225 (kg) New Holland Standard Warranty Applies
@ 500 mm forward:
- 1900 (lbs.) / 862 (kg)
-CP9J 06
140TLA FARM LOADER WM33/37 (T4B ONLY)
US PRICE LIST
Page 9 of 27 -CP9J 06 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0279XX WRKMSTR 33 Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 140TL Loader for WORKMASTER 33 ROPS
Package Contains:
- Base 140TL Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900083P64) ($102.00)
X0280XX WRKMSTR 37 Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 140TL Loader for WORKMASTER 33 ROPS
Package Contains:
- Base 140TL Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900083P64) ($102.00)
-CP9J 06
140TLA FARM LOADER WM33/37 (T4B ONLY)
US PRICE LIST
Page 10 of 27 -CP9J 06 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762006 LOADER MOUNTS/HARDWARE, A
CONVERSION KIT.
This kit allows a 140TL loader (713740016) for
WORKMASTER 33/37 tractors to be used on
WORKMASTER 35/40 T4B tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
300 LB 9000615P00 $750.00
-CP9P 01
235TL FARM LOADER BOOMER 24
US PRICE LIST
Page 11 of 27 -CP9P 01 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS: Breakout force
Current New Holland Compact Models: @ bucket pivot pin:
- Boomer™ 24 - 1672 (lbs.) / 760 (kg)
@ 500 mm forward:
NOTE: - 1166 (lbs.) / 530 (kg)
Important Compatibility Information Bucket roll back force:
- 235TL is only compatible with Boomer @ ground level (500 mm forward):
24 compact tractors - 1298 (lbs.) / 590 (kg)
- To assure proper performance, see
Operator's Manual for recommended Cycle times:
counterweighting Raising: 2.4 sec
Lowering: 1.2 sec
Loader Specifications: Bucket dumping: 2.4 sec
Max lift height (to bucket pivot pin): Bucket roll back: 1.2 sec
- 80.7 in / 2050 mm
Max lift height (under level bucket): Bucket width:
- 75.6 in / 1920 mm 54.0 in / 1371 mm
Reach at max lift height:
- 25.2 in / 640 mm Bucket Capacities:
Max dump angle: 51.0° Struck:
Bucket roll back angle: 29.0° 54" Bucket = .20 cu yd.
Digging depth: Heaped:
- 3.9 in / 100.0 mm 54" Bucket = .24 cu yd.
Lift capacity: Loader includes Grill Guard
@ bucket pivot pin, max height:
- 1034 (lbs.) / 470 (kg) Loader specifications may vary based
@ 500 mm forward, max height: on tractor model, engine speed,
- 704 (lbs.) / 320 (kg) hydraulic system, tire type/ size, etc.
@ bucket pivot pin, 1500 mm height:
- 1298 (lbs.) / 590 (kg)
@ 500 mm forward, 1500 mm height WARRANTY
- 968 (lbs.) / 440 (kg) New Holland Standard Warranty Applies
-CP9P 01
235TL FARM LOADER BOOMER 24
US PRICE LIST
Page 12 of 27 -CP9P 01 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_T9981 CONFIGURATION
XT9981X Less Fast Pick Config No Charge
X0283XX BMR 24 Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 235TL Loader for Boomer 24
Package Contains:
- Base 235TL Loader
- Mounting Frame
- Valve and Joystick
- 54" Pin on bucket
- Grill Guard
(900067P24) ($82.00)
FAST PICK CONFIGURATION
-CP9P 01
235TL FARM LOADER BOOMER 24
US PRICE LIST
Page 13 of 27 -CP9P 01 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 710440186 MID MNT REM VLV AND JSTIC 45 LB 9000503P48 $614.00
-CP9J 01
250TLA2 FARM LOADER BOOMER 35/40 (T4B)
US PRICE LIST
Page 14 of 27 -CP9J 01 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS:
Current New Holland Compact Models: Breakout force:
- Boomer™ 35/40 ROPS (T4B ONLY) @ bucket pivot pin:
- Boomer™ 40 Cab (T4B ONLY) - 3257 (lbs.) / 1477 (kg)
@ 500 mm forward:
NOTE: - 2444 (lbs.) / 1109 (kg)
Important Compatibility Information
- A configured model 250TLA2 is NOT Cycle times:
compatible with other model tractors: Raising: 3.8 sec
Boomer™ 3040/3045/3050, 30/40 Lowering: 2.0 sec
Tier 3 or 33/37 Tier 4B Bucket dumping: 3.5 sec
- To assure proper performance, see Bucket roll back: 2.2 sec
Operator's Manual for recommended
counterweighting. Bucket width:
- 68 in / 1727 mm
Loader Specifications: (PRELIMINARY)
Max lift height (to bucket pivot pin): Bucket Capacities:
- 104 in / 2642 mm Struck:
Max lift height (under level bucket): 68" Bucket = .43 cu yd.
- 98 in / 2489 mm Heaped:
Clearance with bucket dumped: 68" Bucket = .53 cu yd.
- 77 in / 1956 mm
Reach at max lift height: Loader specifications may vary based
- 48 in/ 1219 mm on tractor model, hydraulic system, tire
Max dump angle: 48 ° size, etc.
Reach with bucket on ground:
- 78 in / 1981 mm *NOTE: The 250TLA2 do not come
Bucket roll back angle: 30 ° configured come with a mid mount
Digging depth: valve and joystick as these items
- 6.8 in / 173 mm are now standard on the Boomer™
35/40 T4B tractors. If a mid mount
Lift capacity: valve, joystick is needed, these items
@ bucket pivot pin, max height: must be ordered from parts.
- 1822 (lbs.) / 826 (kg)
@ 500 mm forward, max height: *Couplers are included with loader
- 1354 (lbs.) / 614 (kg)
@ bucket pivot pin, 1500 mm height: WARRANTY
- 2176 (lbs.) / 987 (kg) New Holland Standard Warranty Applies
@ 500 mm forward, 1500 mm height
- 1686 (lbs.) / 765 (kg)
-CP9J 01
250TLA2 FARM LOADER BOOMER 35/40 (T4B)
US PRICE LIST
Page 15 of 27 -CP9J 01 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_T9981 CONFIGURATION
XT9981X Less Fast Pick Config No Charge
X0331XX BMR 40 Cab Fast Pick
Fast Pick 250TLA2 Loader for Boomer 40 Cab (T4B)
Package Contains:
- Base 250TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900100P04) ($122.00)
FAST PICK CONFIGURATION
-CP9J 01
250TLA2 FARM LOADER BOOMER 35/40 (T4B)
US PRICE LIST
Page 16 of 27 -CP9J 01 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762016 Cls 2 Mounting & Hardware Kit
CONVERSION KIT.
This kit allows a 250TLA1 loader (727099016 Rops /
727099026 Cab) for BOOMER 33/37 tractors to be used on
BOOMER 35/40 T4B Rops and Cab tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
265 LB 9000615P00 $750.00
-CP9J 03
250TLA1 FARM LOADER BOOMER 33/37 (T4B)
US PRICE LIST
Page 17 of 27 -CP9J 03 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS:
Current New Holland Compact Models: Breakout force:
- Boomer™ 33/37 ROPS (T4B) @ bucket pivot pin:
- Boomer™ 37 Cab (T4B) - 3257 (lbs.) / 1477 (kg)
@ 500 mm forward:
NOTE: - 2444 (lbs.) / 1109 (kg)
Important Compatibility Information
- A configured model 250TLA1 is NOT Cycle times:
compatible with other model tractors: Raising: 3.8 sec
Boomer™ 3040/3045/3050,30/40 T3 Lowering: 2.0 sec
- To assure proper performance, see Bucket dumping: 3.5 sec
Operator's Manual for recommended Bucket roll back: 2.2 sec
counterweighting.
Bucket width:
Loader Specifications: - 68 in / 1727 mm
Max lift height (to bucket pivot pin):
- 104 in / 2642 mm Bucket Capacities:
Max lift height (under level bucket): Struck:
- 98 in / 2489 mm 68" Bucket = .43 cu yd.
Clearance with bucket dumped: Heaped:
- 77 in / 1956 mm 68" Bucket = .53 cu yd.
Reach at max lift height:
- 48 in/ 1219 mm Loader specifications may vary based
Max dump angle: 48 ° on tractor model, hydraulic system, tire
Reach with bucket on ground: size, etc.
- 78 in / 1981 mm
Bucket roll back angle: 30 ° *NOTE: The 250TLA1 do not come
Digging depth: configured come with a mid mount
- 6.8 in / 173 mm valve and joystick as these items
are now standard on the Boomer™
Lift capacity: 33/37 T4B tractors. If a mid mount
@ bucket pivot pin, max height: valve, joystick is needed, these items
- 1822 (lbs.) / 826 (kg) must be ordered from parts.
@ 500 mm forward, max height:
- 1354 (lbs.) / 614 (kg) *Couplers are included with loader
@ bucket pivot pin, 1500 mm height:
- 2176 (lbs.) / 987 (kg) WARRANTY
@ 500 mm forward, 1500 mm height New Holland Standard Warranty Applies
- 1686 (lbs.) / 765 (kg)
-CP9J 03
250TLA1 FARM LOADER BOOMER 33/37 (T4B)
US PRICE LIST
Page 18 of 27 -CP9J 03 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0275XX BMR 37 Cab Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 250TLA1 Loader for Boomer 37 Cab
Package Contains:
- Base 250TLA1 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 68" Quick Attach bucket
(900099P22) ($121.00)
-CP9J 03
250TLA1 FARM LOADER BOOMER 33/37 (T4B)
US PRICE LIST
Page 19 of 27 -CP9J 03 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762016 Cls 2 Mounting & Hardware Kit
CONVERSION KIT.
This kit allows a 250TLA1 loader (727099016 Rops /
727099026 Cab) for BOOMER 33/37 tractors to be used on
BOOMER 35/40 T4B Rops and Cab tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
265 LB 9000615P00 $750.00
-CP9J 02
260TLA2 FARM LOADER BOOMER 45/50/55 T4B
US PRICE LIST
Page 20 of 27 -CP9J 02 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS:
Current New Holland Compact Models:
- Boomer™ 45/50/55 ROPS(T4B ONLY)
- Boomer™ 45/50/55 Cab (T4B ONLY)
NOTE:
Important Compatibility Information
- A configured model 260TLA2 is NOT
compatible with other model tractors: Breakout force:
Boomer™ 40/50 Tier 3 or 41/47 T4B @ bucket pivot pin:
- To assure proper performance, see - 4081 (lbs.) / 1851 (kg)
Operator's Manual for recommended @ 500 mm forward:
counterweighting. - 3191 (lbs.) / 1447 (kg)
Loader Specifications: (PRELIMINARY) Cylce times:
Max lift height (to bucket pivot pin): Raising: 3.8 sec
- 109 in / 2769 mm Lowering: 2.0 sec
Max lift height (under level bucket): Bucket dumping: 3.5 sec
- 103 in / 2616 mm Bucket roll back: 2.2 sec
Clearance with bucket dumped:
- 80 in / 2032 mm Bucket width:
Reach at max lift height: - 72 in / 1829 mm
- 58 in/ 1473 mm
Max dump angle: 56 ° Loader specifications may vary based
Reach with bucket on ground: on tractor model, hydraulic system, tire
- 86 in / 2184 mm size, etc.
Bucket roll back angle: 28 °
Digging depth: *NOTE: The 260TLA2 do not come
- 6.3 in / 160 mm configured come with a mid mount
valve and joystick as these items
Lift capacity: are now standard on the Boomer™
@ bucket pivot pin, max height: 45/50/55 tractors. If a mid mount
- 2371 (lbs.) / 1076 (kg) valve, joystick is needed, these items
@ 500 mm forward, max height: must be ordered from parts.
- 1849 (lbs.) / 839 (kg)
@ bucket pivot pin, 1500 mm height: *Couplers are included with loader
- 2828 (lbs.) / 1283 (kg)
@ 500 mm forward, 1500 mm height WARRANTY
- 2256 (lbs.) / 1023 (kg) New Holland Standard Warranty Applies
-CP9J 02
260TLA2 FARM LOADER BOOMER 45/50/55 T4B
US PRICE LIST
Page 21 of 27 -CP9J 02 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0333XX BMR 50 Cab Fast Pick
Fast Pick 260TLA2 Loader for Boomer 50 Cab (T4B)
Package Contains:
- Base 260TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 72" Quick Attach bucket
(900103P32) ($126.00)
X0332XX BMR 50 ROPS Fast Pick
Fast Pick 260TLA2 Loader for Boomer 50 ROPS (T4B)
Package Contains:
- Base 260TLA2 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 72" Quick Attach bucket
(900103P32) ($126.00)
-CP9J 02
260TLA2 FARM LOADER BOOMER 45/50/55 T4B
US PRICE LIST
Page 22 of 27 -CP9J 02 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762026 LOADER MOUNTS/HARDWARE, A
CONVERSION KIT.
This kit allows a 260TLA1 loader (727100006 Rops/
727100026 Cab) for BOOMER 41/47 tractors to be used on
BOOMER 45/50/55 T4B Rops and Cab tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
231 LB 9000615P00 $750.00
-CP9J 04
260TLA1 FARM LOADER BOOMER 41/47 (T4B)
US PRICE LIST
Page 23 of 27 -CP9J 04 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS:
Current New Holland Compact Models:
- Boomer™ 41/47 ROPS (T4B)
- Boomer™ 41/47 Cab (T4B)
NOTE:
Important Compatibility Information
- A configured model 260TLA1 is NOT
compatible with other model tractors: Breakout force:
Boomer™ 40/50 T3 or 45/50/55 T4B @ bucket pivot pin:
- To assure proper performance, see - 4081 (lbs.) / 1851 (kg)
Operator's Manual for recommended @ 500 mm forward:
counterweighting. - 3191 (lbs.) / 1447 (kg)
Loader Specifications: Cylce times:
Max lift height (to bucket pivot pin): Raising: 3.8 sec
- 109 in / 2769 mm Lowering: 2.0 sec
Max lift height (under level bucket): Bucket dumping: 3.5 sec
- 103 in / 2616 mm Bucket roll back: 2.2 sec
Clearance with bucket dumped:
- 80 in / 2032 mm Bucket width:
Reach at max lift height: - 72 in / 1829 mm
- 58 in/ 1473 mm
Max dump angle: 56 ° Loader specifications may vary based
Reach with bucket on ground: on tractor model, hydraulic system, tire
- 86 in / 2184 mm size, etc.
Bucket roll back angle: 28 °
Digging depth: *NOTE: The 260TLA1 do not come
- 6.3 in / 160 mm configured come with a mid mount
valve and joystick as these items
Lift capacity: are now standard on the Boomer™
@ bucket pivot pin, max height: 41/47 tractors. If a mid mount valve,
- 2371 (lbs.) / 1076 (kg) joystick is needed, these items must
@ 500 mm forward, max height: be ordered from parts.
- 1849 (lbs.) / 839 (kg)
@ bucket pivot pin, 1500 mm height: *Couplers are included with loader
- 2828 (lbs.) / 1283 (kg)
@ 500 mm forward, 1500 mm height WARRANTY
- 2256 (lbs.) / 1023 (kg) New Holland Standard Warranty Applies
-CP9J 04
260TLA1 FARM LOADER BOOMER 41/47 (T4B)
US PRICE LIST
Page 24 of 27 -CP9J 04 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0282XX BMR 47 Rops Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 260TLA1 Loader for Boomer 47 ROPS
Package Contains:
- Base 260TLA1 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 72" Quick Attach bucket
(900103P32) ($126.00)
X0276XX BMR 47 Cab Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 260TLA1 Loader for Boomer 47 Cab
Package Contains:
- Base 260TLA1 Loader
- Mounting Frame
- SSL Quick Attach Face plate
- 72" Quick Attach bucket
(900103P32) ($126.00)
-CP9J 04
260TLA1 FARM LOADER BOOMER 41/47 (T4B)
US PRICE LIST
Page 25 of 27 -CP9J 04 0030 000 01-JAN-18
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
713762026 LOADER MOUNTS/HARDWARE, A
CONVERSION KIT.
This kit allows a 260TLA1 loader (727100006 Rops/
727100026 Cab) for BOOMER 41/47 tractors to be used on
BOOMER 45/50/55 T4B Rops and Cab tractors.
The kit contains new loader mounting brackets, hardware and
hydraulic coupler kit.
231 LB 9000615P00 $750.00
-CP9J 05
250TLA FARM LOADER BOOMER 45/50D 46/54D
US PRICE LIST
Page 26 of 27 -CP9J 05 0030 000 01-JAN-18
Standard Equipment
TRACTOR APPLICATIONS: Lift capacity:
Current New Holland Compact Models: @ bucket pivot pin, max height:
- Boomer™ CVT 45/50D - 1822 (lbs.) / 826 (kg)
- Boomer™ CVT 46/54D @ 500 mm forward, max height:
- 1354 (lbs.) / 614 (kg)
Prior New Holland Compact Models: @ bucket pivot pin, 1500 mm height:
- Boomer™ CVT 3040/3045/3050 - 2176 (lbs.) / 987 (kg)
Serial # ZDMB11925 & newer ONLY @ 500 mm forward, 1500 mm height
- 1686 (lbs.) / 765 (kg)
NOTE: Breakout force:
Important Compatibility Information @ bucket pivot pin:
- A configured model 250TLA IV is NOT - 3257 (lbs.) / 1477 (kg)
compatible with other model tractors @ 500 mm forward:
- To assure proper performance, see - 2444 (lbs.) / 1109 (kg)
Operator's Manual for recommended
counterweighting. Cycle times:
Raising: 3.8 sec
Loader Specifications: Lowering: 2.0 sec
Max lift height (to bucket pivot pin): Bucket dumping: 3.5 sec
- 104 in / 2642 mm Bucket roll back: 2.2 sec
Max lift height (under level bucket):
- 98 in / 2489 mm Bucket width:
Clearance with bucket dumped: - 68 in / 1727 mm
- 77 in / 1956 mm
Reach at max lift height: Bucket Capacities:
- 48 in/ 1219 mm Struck:
Max dump angle: 48 ° 68" Bucket = .43 cu yd.
Reach with bucket on ground: Heaped:
- 78 in / 1981 mm 68" Bucket = .53 cu yd.
Bucket roll back angle: 30 °
Digging depth: Loader specifications may vary based
- 6.8 in / 173 mm on tractor model, hydraulic system, tire
size, etc.
WARRANTY
New Holland Standard Warranty Applies
-CP9J 05
250TLA FARM LOADER BOOMER 45/50D 46/54D
US PRICE LIST
Page 27 of 27 -CP9J 05 0030 000 01-JAN-18
Factory Supplied Options
Order Code Description Weight Factory Data List Price
XT9981X Less Fast Pick Config No Charge
X0281XX BMR 54D Fast Pick
FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER
Fast Pick 250TLA1 Loader for Boomer 54D Cab
Package Contains:
- Base 250TLA1 Loader for Loader Ready Tractor
- SSL Quick Attach Face plate
- 72" Quick Attach bucket
(900087P74) ($107.00)