spec 10g us cylinder multi-point sets
DESCRIPTION
ÂTRANSCRIPT
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-1
US CYLINDER MULTI-POINT RETROFIT SETS
Revised 02/01/16
CONTENTSThis section contains bronze trim sets that retrofit onto US cylinder type multi-point doors. Complete multi-point sets include bronze trim, cylinder(s), spindle, fasteners and installation instructions. No locks or strike plates are included. Solid brass strike plates included on door can be refinished. All complete multi-point retrofit set part numbers begin with CMP. Please include the name of the door manufacturer at time of ordering. Hand Peened and Inlay orders do NOT qualify for return and are non-refundable.
TABLE OF CONTENTS:
US Cylinder Multi-Point Handing Check List Page 10-2
US Cylinder/Dummy Cremone Sets Page 10-3
Bevel Edge US Cylinder Sets Pages 10-4 – 10-11
Arch US Cylinder Sets Pages 10-12 – 10-18
Oval US Cylinder Sets Pages 10-19 – 10-20
Contemporary US Cylinder Sets Pages 10-21 – 10-26
Fleur de Lis US Cylinder Sets Pages 10-27 – 10-30
Ridge US Cylinder Sets Pages 10-31 – 10-34
Corrugated w/Band US Cylinder Sets Pages 10-35 – 10-36
Trellis US Cylinder Sets Pages 10-37 – 10-40
Deco US Cylinder Sets Pages 10-41 – 10-42
Hampton US Cylinder Sets Pages 10-43 – 10-44
Corrugated US Cylinder Sets Pages 10-45 – 10-50
Bandbox US Cylinder Sets Pages 10-51 – 10-52
Hand Peened US Cylinder Sets Pages 10-53 – 10-54
Horizontal Inlay US Cylinder Sets Pages 10-55 – 10-56
Vertical Inlay US Cylinder Sets Pages 10-57 – 10-58
Corduroy US Cylinder Sets Pages 10-59 – 10-62
Mesa US Cylinder Sets Pages 10-63 – 10-66
Burlap US Cylinder Sets Pages 10-67 – 10-68
Novus US Cylinder Sets Pages 10-69 – 10-74
Ridge Burlap US Cylinder Sets Pages 10-75 – 10-76
ORDERING INSTRUCTIONS:
Complete Sets and Trim Sets: See Ordering Instructions in Binder 1/ Dealer Information. Custom Sets: See Custom Ordering Instructions in Binder 1/ Dealer Information.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-2
Revised 02/01/16
US CYLINDER MULTI-POINT HANDING GUIDE CHECK LIST
1. Specify the door manufacturer.
___________________________
2. Specify the thickness of the door.
___________________________
3. Is the lever above or below the cylinder?
___________________________
4. Lock body manufacturer?
___________________________
5. Spindle size. (circle one)
7mm - 8mm - 10mm
___________________________
6. TPC orientation. (circle one)
Horizontal slot - Vertical slot - Cross Pattern
A. Spindle center to cylinder center. (circle one)
85mm - 92mm - 6" - 104.5mm
___________________________
7. Exterior gasket upcharges apply. (circle one)
yes - no
PLEASE INDICATE DOOR CONFIGURATION
ACTIVE(INSWING)
Interior
Exterior
PATIO OR ACTIVE DUMMY OR DUMMY(INSWING)
Exterior
Interior
ACTIVE(OUTSWING)
PATIO OR ACTIVE DUMMY OR DUMMY(OUTSWING)
Interior
Exterior Exterior
Interior
Active Inactive
Active Active Dummy or Full Dummy
LHR LHR RHR
LH LH RH
Active Dummy or Full Dummy
Patio
Patio
US CYLINDER MULTIPOINT CHECK LIST
Spindle Lever
USCylinder
Hole
A
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-3
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
US CYLINDER/DUMMY CREMONE MULTI-POINT SETS
Cremone bolts.
CMP-832EXT w/CMP-CB1000INT – Complete set with keyed US cylinder,
SVB turn piece and spindle. – 92mm spacing. – Interior dummy cremone bolt active
lever for multi-point. – Specify length of dummy cremone bolt. – Single cylinder.
CMP-832EXT w/CMP-CB1000INT-PF – Complete set with SVB turn piece
and spindle. – 92mm spacing. – Interior dummy cremone bolt active
lever for multi-point. – Specify length of dummy cremone bolt. – Patio function.
CMP-832EXT w/CMP-CB1000INT-AD – Complete set with spindle. – 92mm spacing. – Interior dummy cremone bolt active
lever for multi-point. – Specify length of dummy cremone bolt. – Active dummy.
2 1/
8"
2"
10 1
/2"
2 1/8"
1"
7/8"
6 1/
2"
6 1/
2"
2 1/8"
2 1/
8"
2"
10 1
/2"
2 1/8"
1"
7/8"
6 1/
2"
6 1/
2"
2 1/8"
2 1/
8"
2"
10 1
/2"
2 1/8"
1"
7/8"
6 1/
2"
6 1/
2"
2 1/8"
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Above pricing is for 6’-8” door. For additional door heights please add per 6” for door height over 6’-8”.*Specify length of dummy cremone (upcharges may apply).**Specify dimension from center of lever to bottom of the door. 36” is standard.
CMP-US-832 EXT w/CMP-CB1000INT Single cylinder. US cylinder multi-point retrofit set w/DUMMY cremone bolt interior.
CMP-US-832 EXT w/CMP-CB1000INT-PF Patio function. US cylinder multi-point retrofit set w/DUMMY cremone bolt interior.
CMP-US-832 EXT w/CMP-CB1000INT-AD-PF
Active dummy turn piece. US cylinder multi-point retrofit set w/DUMMY cremone bolt interior. (Not shown)
CMP-US-832 EXT w/CMP-CB1000INT-AD Active dummy. US cylinder multi-point retrofit set w/DUMMY cremone bolt interior
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-4
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
811 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-811 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-811PF – Complete set with SVB turn piece
and spindle. – Patio function.
CMP-US-811AD – Complete set with spindle. – Active dummy.
CMP-US-811FD – Trim set only. – Full dummy.
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-811 Keyed US cylinder entry set. MP-US-811EXT (ext) MP-US-811TPC (int)
CMP-US-811PF Patio function US cylinder entry set. MP-US-811EXT-PF (ext) MP-US-811TPC (int)
CMP-US-811AD-PF Active dummy turn piece set. MP-US-811EXT-D (ext) MP-US-811TPC (int) (Not shown)
CMP-US-811AD Active dummy set. MP-US-811EXT-D (ext) MP-US-811P (int)
CMP-US-811FD Full dummy set. MP-US-811EXT-D (ext) MP-US-811D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-5
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
812 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-812 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-812PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-812AD – Complete set with spindle. – Active dummy.
CMP-US-812FD – Trim set only. – Full dummy.
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-812 Keyed US cylinder entry set. MP-US-812EXT (ext) MP-US-812TPC (int)
CMP-US-812PF Patio function US cylinder entry set. MP-US-812EXT-PF (ext) MP-US-812TPC (int)
CMP-US-812AD-PF Active dummy turn piece set. MP-US-812EXT-D (ext) MP-US-812TPC (int) (Not shown)
CMP-US-812AD Active dummy set. MP-US-812EXT-D (ext) MP-US-812P (int)
CMP-US-812FD Full dummy set. MP-812EXT-D (ext) MP-US-812D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-6
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
814 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-814 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-814PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-814AD – Complete set with spindle. – Active dummy.
CMP-US-814FD – Trim set only. – Full dummy.
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
4"4" 4"4"4" 4"4"4"
CMP-US-814 Keyed US cylinder entry set. MP-US-814EXT (ext) MP-US-814TPC (int)
CMP-US-814PF Patio function US cylinder entry set. MP-US-814EXT-PF (ext) MP-US-814TPC (int)
CMP-US-814AD-PF Active dummy turn piece set. MP-US-814EXT-D (ext) MP-US-814TPC (int) (Not shown)
CMP-US-814AD Active dummy set. MP-US-814EXT-D (ext) MP-US-814P (int)
CMP-US-814FD Full dummy set. MP-US-814EXT-D (ext) MP-US-814D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-7
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multipoint retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
815 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-815 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-815PF – Complete set with SVB turn piece
and spindle. – Patio function.
CMP-US-815AD – Complete set with spindle. – Active dummy.
CMP-US-815FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
CMP-US-815 Keyed US cylinder entry set. MP-US-815EXT (ext) MP-US-815TPC (int)
CMP-US-815PF Patio function US cylinder entry set. MP-US-815EXT-PF (ext) MP-US-815TPC (int)
CMP-US-815AD-PF Active dummy turn piece set. MP-US-815EXT-D (ext) MP-US-815TPC (int) (Not shown)
CMP-US-815AD Active dummy set. MP-US-815EXT-D (ext) MP-US-815P (int)
CMP-US-815FD Full dummy set. MP-US-815EXT-D (ext) MP-US-815D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-8
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
832 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-832 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-832PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-832AD – Complete set with spindle. – Active dummy.
CMP-US-832FD – Trim set only. – Full dummy.
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-832 Keyed US cylinder entry set. MP-US-832EXT (ext) MP-US-832TPC (int)
CMP-US-832PF Patio function US cylinder entry set. MP-US-832EXT-PF (ext) MP-US-832TPC (int)
CMP-US-832AD-PF Active dummy turn piece set. MP-US-832EXT-D (ext) MP-US-832TPC (int) (Not shown)
CMP-US-832AD Active dummy set. MP-US-832EXT-D (ext) MP-US-832P (int)
CMP-US-832FD Full dummy set. MP-US-832EXT-D (ext) MP-US-832D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-9
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
833 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-833 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-833PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-833AD – Complete set with spindle. – Active dummy.
CMP-US-833FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
CMP-US-833 Keyed US cylinder entry set. MP-US-833EXT (ext) MP-US-833TPC (int)
CMP-US-833PF Patio function US cylinder entry set. MP-US-833EXT-PF (ext) MP-US-833TPC (int)
CMP-US-833AD-PF Active dummy turn piece set. MP-US-833EXT-D (ext) MP-US-833TPC (int) (Not shown)
CMP-US-833AD Active dummy set. MP-US-833EXT-D (ext) MP-US-833P (int)
CMP-US-833FD Full dummy set. MP-US-833EXT-D (ext) MP-US-833D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-10
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
835 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-835 – Complete set with keyed US cylinder,
SVB turn piece and spindle. – Single cylinder.
CMP-US-835PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-835PF-D – Trim set with active SVB
turn piece and dummy levers.
CMP-US-835FD – Trim set only. – Full dummy.
12"
2"2"
2 3/
4"
2 3/
4"
12"
2"2"
2 3/
4"
2 3/
4"
12"
2"2"
2 3/
4"
2 3/
4"
12"
2"2"
2 3/
4"
2 3/
4"
6" 6" 6"6"
CMP-US-835 Keyed US cylinder entry set. MP-US-835EXT (ext) MP-US-835TPC (int)
CMP-US-835PF Patio function US cylinder entry set. MP-US-835EXT-PF (ext) MP-US-835TPC (int)
CMP-US-835PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-835EXT-D (ext) MP-US-835TPC-D (int)
CMP-US-835FD Full dummy set. MP-US-835EXT-D (ext) MP-US-835D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-11
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
836 BEVEL EDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-836 – Complete set with keyed US cylinder,
SVB turn piece and spindle. – Single cylinder.
CMP-US-836PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-836PF-D – Trim set with active SVB
turn piece and dummy levers.
CMP-US-836FD – Trim set only. – Full dummy.
12"
2 1/2"2 1/2"
2 3/
4"
2 3/
4"
12"
2 1/2"2 1/2"
2 3/
4"
2 3/
4"
12"
2 1/2"2 1/2"
2 3/
4"
2 3/
4"
12"
2 1/2"2 1/2"
2 3/
4"
2 3/
4"
6" 6" 6" 6"
CMP-US-836 Keyed US cylinder entry set. MP-US-836EXT (ext) MP-US-836TPC (int)
CMP-US-836PF Patio function US cylinder entry set. MP-US-836EXT-PF (ext) MP-US-836TPC (int)
CMP-US-836PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-836EXT-D (ext) MP-US-836TPC-D (int)
CMP-US-836FD Full dummy set. MP-US-836EXT-D (ext) MP-US-836D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-12
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
A811 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A811 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A811PF – Complete set with SVB turn piece
and spindle. – Patio function.
CMP-US-A811AD – Complete set with spindle. – Active dummy.
CMP-US-A811FD – Trim set only. – Full dummy.
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-A811 Keyed US cylinder entry set. MP-US-A811EXT (ext) MP-US-A811TPC (int)
CMP-US-A811PF Patio function US cylinder entry set. MP-US-A811EXT-PF (ext) MP-US-A811TPC (int)
CMP-US-A811AD-PF Active dummy turn piece set. MP-US-A811EXT-D (ext) MP-US-A811TPC (int) (Not shown)
CMP-US-A811AD Active dummy set. MP-US-A811EXT-D (ext) MP-US-A811P (int)
CMP-US-A811FD Full dummy set. MP-US-A811EXT-D (ext) MP-US-A811D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-13
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
A812 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A812 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A812PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-A812AD – Complete set with spindle. – Active dummy.
CMP-US-A812FD – Trim set only. – Full dummy.
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
10 1
/2"
2 1/2"2 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-A812 Keyed US cylinder entry set. MP-US-A812EXT (ext) MP-US-A812TPC (int)
CMP-US-A812PF Patio function US cylinder entry set. MP-US-A812EXT-PF (ext) MP-US-A812TPC (int)
CMP-US-A812AD-PF Active dummy turn piece set. MP-US-A812EXT-D (ext) MP-US-A812TPC (int) (Not shown)
CMP-US-A812AD Active dummy set. MP-US-A812EXT-D (ext) MP-US-A812P (int)
CMP-US-A812FD Full dummy set. MP-US-A812EXT-D (ext) MP-US-A812D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-14
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
A814 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A814 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A814PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-A814AD – Complete set with spindle. – Active dummy.
CMP-US-A814FD – Trim set only. – Full dummy.
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
4" 4" 4"4"4"4"4"4"
CMP-US-A814 Keyed US cylinder entry set. MP-US-A814EXT (ext) MP-US-A814TPC (int)
CMP-US-A814PF Patio function US cylinder entry set. MP-US-A814EXT-PF (ext) MP-US-A814TPC (int)
CMP-US-A814AD-PF Active dummy turn piece set. MP-US-A814EXT-D (ext) MP-US-A814TPC (int) (Not shown)
CMP-US-A814AD Active dummy set. MP-US-A814EXT-D (ext) MP-US-A814P (int)
CMP-US-A814FD Full dummy set. MP-US-A814EXT-D (ext) MP-US-A814D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-15
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
A815 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A815 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A815PF – Complete set with SVB turn piece
and spindle. – Patio function.
CMP-US-A815AD – Complete set with spindle. – Active dummy.
CMP-US-A815FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
11 1
/2"
1 1/2"1 1/2"
4"4"
CMP-US-A815 Keyed US cylinder entry set. MP-US-A815EXT (ext) MP-US-A815TPC (int)
CMP-US-A815PF Patio function US cylinder entry set. MP-US-A815EXT-PF (ext) MP-US-A815TPC (int)
CMP-US-A815AD-PF Active dummy turn piece set. MP-US-A815EXT-D (ext) MP-US-A815TPC (int) (Not shown)
CMP-US-A815AD Active dummy set. MP-US-A815EXT-D (ext) MP-US-A815P (int)
CMP-US-A815FD Full dummy set. MP-US-A815EXT-D (ext) MP-A815D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-16
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
A832 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A832 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A832PF – Complete set with SVB turn piece and spindle. – Patio function.
CMP-US-A832AD – Complete set with spindle. – Active dummy.
CMP-US-A832FD – Trim set only. – Full dummy.
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-A832 Keyed US cylinder entry set. MP-US-A832EXT (ext) MP-US-A832TPC (int)
CMP-US-A832PF Patio function US cylinder entry set. MP-US-A832EXT-PF (ext) MP-US-A832TPC (int)
CMP-US-A832AD-PF Active dummy turn piece set. MP-US-A832EXT-D (ext) MP-US-A832TPC (int) (Not shown)
CMP-US-A832AD Active dummy set. MP-US-A832EXT-D (ext) MP-US-A832P (int)
CMP-US-A832FD Full dummy set. MP-US-A832EXT-D (ext) MP-US-A832D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-17
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
A833 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-A833 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-A833PF – Complete set with SVB turn piece and spindle. – Patio function.
CMP-US-A833AD – Complete set with spindle. – Active dummy.
CMP-US-A833FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
CMP-US-A833 Keyed US cylinder entry set. MP-US-A833EXT (ext) MP-US-A833TPC (int)
CMP-US-A833PF Patio function US cylinder entry set. MP-US-A833EXT-PF (ext) MP-US-A833TPC (int)
CMP-US-A833AD-PF Active dummy turn piece set. MP-US-A833EXT-D (ext) MP-US-A833TPC (int) (Not shown)
CMP-US-A833AD Active dummy set. MP-US-A833EXT-D (ext) MP-US-A833P (int)
CMP-US-A833FD Full dummy set. MP-US-A833EXT-D (ext) MP-US-A833D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-18
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
A836 ARCH US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
CMP-US-A836 – Complete set with keyed US cylinder,
SVB turn piece and spindle. – Single cylinder.
CMP-US-A836PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-A836PF-D – Trim set with active SVB
turn piece and dummy levers.
CMP-US-A836FD – Trim set only. – Full dummy.
12"
2 1/2"2 1/2"
3"3"
12"
2 1/2"2 1/2"
3"3"
12"
2 1/2"2 1/2"
3"3"
12"
2 1/2"2 1/2"
3"3"
CMP-US-A836 Keyed US cylinder entry set. MP-US-A836EXT (ext) MP-US-A836TPC (int)
CMP-US-A836PF Patio function US cylinder entry set. MP-US-A836EXT-PF (ext) MP-US-A836TPC (int)
CMP-US-A836PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-A836EXT-D (ext) MP-US-A836TPC-D (int)
CMP-US-A836FD Full dummy set. MP-US-A836EXT-D (ext) MP-US-A836D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-19
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
OP812 OVAL US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-OP812 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-OP812PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-OP812AD – Complete set with spindle. – Active dummy.
CMP-US-OP812FD – Trim set only. – Full dummy.
11"
2 5/8"2 5/8"
7"7"
11"
2 5/8"2 5/8"
7"7"
11"
2 5/8"2 5/8"
7"7"
11"
2 5/8"2 5/8"
7"7"
CMP-US-OP812 Keyed US cylinder entry set. MP-US-OP812EXT (ext) MP-US-OP812TPC (int)
CMP-US-OP812PF Patio function US cylinder entry set. MP-US-OP812EXT-PF (ext) MP-US-OP812TPC (int)
CMP-US-OP812AD-PF Active dummy turn piece set. MP-US-OP812EXT-D (ext) MP-US-OP812TPC (int) (Not shown)
CMP-US-OP812AD Active dummy set. MP-US-OP812EXT-D (ext) MP-US-OP812P (int)
CMP-US-OP812FD Full dummy set. MP-US-OP812EXT-D (ext) MP-US-OP812D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-20
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
OP813 OVAL US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-OP813 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-OP813PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-OP813AD – Complete set with spindle. – Active dummy.
CMP-US-OP813FD – Trim set only. – Full dummy.
11"
2 5/8"2 5/8"
4"4"
11"
2 5/8"2 5/8"
4"4"
11"
2 5/8"2 5/8"
4"4"
11"
2 5/8"2 5/8"
4"4"
CMP-US-OP813 Keyed US cylinder entry set. MP-US-OP813EXT (ext) MP-US-OP813TPC (int)
CMP-US-OP813PF Patio function US cylinder entry set. MP-US-OP813EXT-PF (ext) MP-US-OP813TPC (int)
CMP-US-OP813AD-PF Active dummy turn piece set. MP-US-OP813EXT-D (ext) MP-US-OP813TPC (int) (Not shown)
CMP-US-OP813AD Active dummy set. MP-US-OP813EXT-D (ext) MP-US-OP813P (int)
CMP-US-OP813FD Full dummy set. MP-US-OP813EXT-D (ext) MP-US-OP813D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-21
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
980 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-980 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-980PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-980AD – Complete set with spindle. – Active dummy.
CMP-US-980FD – Trim set only. – Full dummy.
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-980 Keyed US cylinder entry set. MP-US-980EXT (ext) MP-US-980TPC (int)
CMP-US-980PF Patio function US cylinder entry set. MP-US-980EXT-PF (ext) MP-US-980TPC (int)
CMP-US-980AD-PF Active dummy turn piece set. MP-US-980EXT-D (ext) MP-US-980TPC (int) (Not shown)
CMP-US-980AD Active dummy set. MP-US-980EXT-D (ext) MP-US-980P (int)
CMP-US-980FD Full dummy set. MP-US-980EXT-D (ext) MP-US-980D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-22
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
981 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-981 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-981PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-981AD – Complete set with spindle. – Active dummy.
CMP-US-981FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
4"4" 4"4"4" 4"4"4"
CMP-US-981 Keyed US cylinder entry set. MP-US-981EXT (ext) MP-US-981TPC (int)
CMP-US-981PF Patio function US cylinder entry set. MP-US-981EXT-PF (ext) MP-US-981TPC (int)
CMP-US-981AD-PF Active dummy turn piece set. MP-US-981EXT-D (ext) MP-US-981TPC (int) (Not shown)
CMP-US-981AD Active dummy set. MP-US-981EXT-D (ext) MP-US-981P (int)
CMP-US-981FD Full dummy set. MP-US-981EXT-D (ext) MP-US-981D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-23
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
982 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-982 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-982PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-982AD – Complete set with spindle. – Active dummy.
CMP-US-982FD – Trim set only. – Full dummy.
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-982 Keyed US cylinder entry set. MP-US-982EXT (ext) MP-US-982TPC (int)
CMP-US-982PF Patio function US cylinder entry set. MP-US-982EXT-PF (ext) MP-US-982TPC (int)
CMP-US-982AD-PF Active dummy turn piece set. MP-US-982EXT-D (ext) MP-US-982TPC (int) (Not shown)
CMP-US-982AD Active dummy set. MP-US-982EXT-D (ext) MP-US-982P (int)
CMP-US-982FD Full dummy set. MP-US-982EXT-D (ext) MP-US-982D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-24
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
983 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-983 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-983PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-983AD – Complete set with spindle. – Active dummy.
CMP-US-983FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4"4" 4"4"4" 4"4"4"
CMP-US-983 Keyed US cylinder entry set. MP-US-983EXT (ext) MP-US-983TPC (int)
CMP-US-983PF Patio function US cylinder entry set. MP-US-983EXT-PF (ext) MP-US-983TPC (int)
CMP-US-983AD-PF Active dummy turn piece set. MP-US-983EXT-D (ext) MP-US-983TPC (int) (Not shown)
CMP-US-983AD Active dummy set. MP-US-983EXT-D (ext) MP-US-983P (int)
CMP-US-983FD Full dummy set. MP-US-983EXT-D (ext) MP-US-983D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-25
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
984 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-984 – Complete set with keyed US
cylinder, SVB turn piece and spindle.
– Single cylinder.
CMP-US-984PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-984PF-D – Trim set with active SVB turn piece and dummy levers.
CMP-US-984FD – Trim set only. – Full dummy.
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"6" 6" 6" 6"
CMP-US-984 Keyed US cylinder entry set. MP-US-984EXT (ext) MP-US-984TPC (int)
CMP-US-984PF Patio function US cylinder entry set. MP-US-984EXT-PF (ext) MP-US-984TPC (int)
CMP-US-984PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-984EXT-D (ext) MP-US-984TPC-D (int)
CMP-US-984FD Full dummy set. MP-US-984EXT-D (ext) MP-US-984D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-26
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
985 CONTEMPORARY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-985 – Complete set with keyed US
cylinder, SVB turn piece and spindle.
– Single cylinder.
CMP-US-985PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-985PF-D – Trim set with active SVB turn piece and dummy levers.
CMP-US-985FD – Trim set only. – Full dummy.
12"
2"2"
12"
2"2"
12"
2"2"
12"
2"2"
3"3" 3"3"3" 3"3"3"6" 6" 6" 6"
CMP-US-985 Keyed US cylinder entry set. MP-US-985EXT (ext) MP-US-985TPC (int)
CMP-US-985PF Patio function US cylinder entry set. MP-US-985EXT-PF (ext) MP-US-985TPC (int)
CMP-US-985PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-985EXT-D (ext) MP-US-985TPC-D (int)
CMP-US-985FD Full dummy set. MP-US-985EXT-D (ext) MP-US-985D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-27
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1240 FLEUR DE LIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1240 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1240PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1240AD – Complete set with spindle. – Active dummy.
CMP-US-1240FD – Trim set only. – Full dummy.
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
CMP-US-1240 Keyed US cylinder entry set. MP-US-1240EXT (ext) MP-US-1240TPC (int)
CMP-US-1240PF Patio function US cylinder entry set. MP-US-1240EXT-PF (ext) MP-US-1240TPC (int)
CMP-US-1240AD-PF Active dummy turn piece set. MP-US-1240EXT-D (ext) MP-US-1240TPC (int) (Not shown)
CMP-US-1240AD Active dummy set. MP-US-1240EXT-D (ext) MP-US-1240P (int)
CMP-US-1240FD Full dummy set. MP-US-1240EXT-D (ext) MP-US-1240D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-28
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1241 FLEUR DE LIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1241 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1241PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1241AD – Complete set with spindle. – Active dummy.
CMP-US-1241FD – Trim set only. – Full dummy.
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
15 5
/8"
1 3/4"1 3/4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
CMP-US-1241 Keyed US cylinder entry set. MP-US-1241EXT (ext) MP-US-1241TPC (int)
CMP-US-1241PF Patio function US cylinder entry set. MP-US-1241EXT-PF (ext) MP-US-1241TPC (int)
CMP-US-1241AD-PF Active dummy turn piece set. MP-US-1241EXT-D (ext) MP-US-1241TPC (int) (Not shown)
CMP-US-1241AD Active dummy set. MP-US-1241EXT-D (ext) MP-US-1241P (int)
CMP-US-1241FD Full dummy set. MP-US-1241EXT-D (ext) MP-US-1241D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-29
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
1245 FLEUR DE LIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1245 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1245PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1245AD – Complete set with spindle. – Active dummy.
CMP-US-1245FD – Trim set only. – Full dummy.
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
CMP-US-1245 Keyed US cylinder entry set. MP-US-1245EXT (ext) MP-US-1245TPC (int)
CMP-US-1245PF Patio function US cylinder entry set. MP-US-1245EXT-PF (ext) MP-US-1245TPC (int)
CMP-US-1245AD-PF Active dummy turn piece set. MP-US-1245EXT-D (ext) MP-US-1245TPC (int) (Not shown)
CMP-US-1245AD Active dummy set. MP-US-1245EXT-D (ext) MP-US-1245P (int)
CMP-US-1245FD Full dummy set. MP-US-1245EXT-D (ext) MP-US-1245D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-30
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1247 FLEUR DE LIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1247 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1247PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1247AD – Complete set with spindle. – Active dummy.
CMP-US-1247FD – Trim set only. – Full dummy.
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
15 1
/2"
2 1/2"2 1/2"
6"6" 6"6"6" 6"6"6"
CMP-US-1247 Keyed US cylinder entry set. MP-US-1247EXT (ext) MP-US-1247TPC (int)
CMP-US-1247PF Patio function US cylinder entry set. MP-US-1247EXT-PF (ext) MP-US-1247TPC (int)
CMP-US-1247AD-PF Active dummy turn piece set. MP-US-1247EXT-D (ext) MP-US-1247TPC (int) (Not shown)
CMP-US-1247AD Active dummy set. MP-US-1247EXT-D (ext) MP-US-1247P (int)
CMP-US-1247FD Full dummy set. MP-US-1247EXT-D (ext) MP-US-1247D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-31
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
826 RIDGE US CYLINDER MULTI-POINT RETROFIT SETS
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-826 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-826PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-826AD – Complete set with spindle. – Active dummy.
CMP-US-826FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
CMP-US-826 Keyed US cylinder entry set. MP-US-826EXT (ext) MP-US-826TPC (int)
CMP-US-826PF Patio function US cylinder entry set. MP-US-826EXT-PF (ext) MP-US-826TPC (int)
CMP-US-826AD-PF Active dummy turn piece set. MP-US-826EXT-D (ext) MP-US-826TPC (int) (Not shown)
CMP-US-826AD Active dummy set. MP-US-826EXT-D (ext) MP-US-826P (int)
CMP-US-826FD Full dummy set. MP-US-826EXT-D (ext) MP-US-826D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-32
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
827 RIDGE US CYLINDER MULTI-POINT RETROFIT SETS
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-827 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-827PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-827AD – Complete set with spindle. – Active dummy.
CMP-US-827FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
4"4"4" 4" 4" 4" 4" 4"
CMP-US-827 Keyed US cylinder entry set. MP-US-827EXT (ext) MP-US-827TPC (int)
CMP-US-827PF Patio function US cylinder entry set. MP-US-827EXT-PF (ext) MP-US-827TPC (int)
CMP-US-827AD-PF Active dummy turn piece set. MP-US-827EXT-D (ext) MP-US-827TPC (int) (Not shown)
CMP-US-827AD Active dummy set. MP-US-827EXT-D (ext) MP-US-827P (int)
CMP-US-827FD Full dummy set. MP-US-827EXT-D (ext) MP-US-827D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-33
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
828 RIDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-828 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-828PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-828AD – Complete set with spindle. – Active dummy.
CMP-US-828FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
CMP-US-828 Keyed US cylinder entry set. MP-US-828EXT (ext) MP-US-828TPC (int)
CMP-US-828PF Patio function US cylinder entry set. MP-US-828EXT-PF (ext) MP-US-828TPC (int)
CMP-US-828AD-PF Active dummy turn piece set. MP-US-828EXT-D (ext) MP-US-828TPC (int) (Not shown)
CMP-US-828AD Active dummy set. MP-US-828EXT-D (ext) MP-US-828P (int)
CMP-US-828FD Full dummy set. MP-US-828EXT-D (ext) MP-US-828D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-34
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
829 RIDGE US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-829 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-829PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-829AD – Complete set with spindle. – Active dummy.
CMP-US-829FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
CMP-US-829 Keyed US cylinder entry set. MP-US-829EXT (ext) MP-US-829TPC (int)
CMP-US-829PF Patio function US cylinder entry set. MP-US-829EXT-PF (ext) MP-US-829TPC (int)
CMP-US-829AD-PF Active dummy turn piece set. MP-US-829EXT-D (ext) MP-US-829TPC (int) (Not shown)
CMP-US-829AD Active dummy set. MP-US-829EXT-D (ext) MP-US-829P (int)
CMP-US-829FD Full dummy set. MP-US-829EXT-D (ext) MP-US-829D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-35
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
4332 CORRUGATED W/ BAND US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4332 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4332PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4332AD – Complete set with spindle. – Active dummy.
CMP-US-4332FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
7 3/
4" 11 1
/2"
2"2"
7 3/
4" 11 1
/2"
2"2"
7 3/
4" 11 1
/2"
2"2"
7 3/
4"
7 3/
4"
7 3/
4"
7 3/
4"
7 3/
4"
1/4"
1/4"
1/4"
1/4"
CMP-US-4332 Keyed US cylinder entry set. MP-US-4332EXT (ext) MP-US-4332TPC (int)
CMP-US-4332PF Patio function US cylinder entry set. MP-US-4332EXT-PF (ext) MP-US-4332TPC (int)
CMP-US-4332AD-PF Active dummy turn piece set. MP-US-4332EXT-D (ext) MP-US-4332TPC (int) (Not shown)
CMP-US-4332AD Active dummy set. MP-US-4332EXT-D (ext) MP-US-4332P (int)
CMP-US-4332FD Full dummy set. MP-US-4332EXT-D (ext) MP-US-4332D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-36
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
4333 CORRUGATED W/ BAND US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4333 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4333PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4333AD – Complete set with spindle. – Active dummy.
CMP-US-4333FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
3 3/
4"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
1/4"
1/4"
1/4"
1/4"
CMP-US-4333 Keyed US cylinder entry set. MP-US-4333EXT (ext) MP-US-4333TPC (int)
CMP-US-4333PF Patio function US cylinder entry set. MP-US-4333EXT-PF (ext) MP-US-4333TPC (int)
CMP-US-4333AD-PF Active dummy turn piece set. MP-US-4333EXT-D (ext) MP-US-4333TPC (int) (Not shown)
CMP-US-4333AD Active dummy set. MP-US-4333EXT-D (ext) MP-US-4333P (int)
CMP-US-4333FD Full dummy set. MP-US-4333EXT-D (ext) MP-US-4333D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-37
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
4532 TRELLIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4532 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4532PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4532AD – Complete set with spindle. – Active dummy.
CMP-US-4532FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
1/4"
1/4"
1/4"
1/4"
CMP-US-4532 Keyed US cylinder entry set. MP-US-4532EXT (ext) MP-US-4532TPC (int)
CMP-US-4532PF Patio function US cylinder entry set. MP-US-4532EXT-PF (ext) MP-US-4532TPC (int)
CMP-US-4532AD-PF Active dummy turn piece set. MP-US-4532EXT-D (ext) MP-US-4532TPC (int) (Not shown)
CMP-US-4532AD Active dummy set. MP-US-4532EXT-D (ext) MP-US-4532P (int)
CMP-US-4532FD Full dummy set. MP-US-4532EXT-D (ext) MP-US-4532D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-38
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
4533 TRELLIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4533 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4533PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4533AD – Complete set with spindle. – Active dummy.
CMP-US-4533FD – Trim set only. – Full dummy.
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"1/
4"
1/4"
1/4"
1/4"
CMP-US-4533 Keyed US cylinder entry set. MP-US-4533EXT (ext) MP-US-4533TPC (int)
CMP-US-4533PF Patio function US cylinder entry set. MP-US-4533EXT-PF (ext) MP-US-4533TPC (int)
CMP-US-4533AD-PF Active dummy turn piece set. MP-US-4533EXT-D (ext) MP-US-4533TPC (int) (Not shown)
CMP-US-4533AD Active dummy set. MP-US-4533EXT-D (ext) MP-US-4533P (int)
CMP-US-4533FD Full dummy set. MP-US-4533EXT-D (ext) MP-US-4533D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-39
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
4535 TRELLIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4535 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4535PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4535AD – Complete set with spindle. – Active dummy.
CMP-US-4535FD – Trim set only. – Full dummy.
12"
2"2"
4 1/
8"
4 1/
8"
12"
2"2"
4 1/
8"
4 1/
8"
12"
2"2"
4 1/
8"
4 1/
8"
12"
2"2"
4 1/
8"
4 1/
8"
1/4"
1/4"
1/4"
1/4"
CMP-US-4535 Keyed US cylinder entry set. MP-US-4535EXT (ext) MP-US-4535TPC (int)
CMP-US-4535PF Patio function US cylinder entry set. MP-US-4535EXT-PF (ext) MP-US-4535TPC (int)
CMP-US-4535AD-PF Active dummy turn piece set. MP-US-4535EXT-D (ext) MP-US-4535TPC (int) (Not shown)
CMP-US-4535AD Active dummy set. MP-US-4535EXT-D (ext) MP-US-4535P (int)
CMP-US-4535FD Full dummy set. MP-US-4535EXT-D (ext) MP-US-4535D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-40
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
4537 TRELLIS US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4537 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4537PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4537AD – Complete set with spindle. – Active dummy.
CMP-US-4537FD – Trim set only. – Full dummy.
12"
2 1/2"2 1/2"
4 1/
8"
4 1/
8"
12"
2 1/2"2 1/2"
4 1/
8"
4 1/
8"
12"
2 1/2"2 1/2"
4 1/
8"
4 1/
8"
12"
2 1/2"2 1/2"
4 1/
8"
4 1/
8"
1/4"
1/4"
1/4"
1/4"
CMP-US-4537 Keyed US cylinder entry set. MP-US-4537EXT (ext) MP-US-4537TPC (int)
CMP-US-4537PF Patio function US cylinder entry set. MP-US-4537EXT-PF (ext) MP-US-4537TPC (int)
CMP-US-4537AD-PF Active dummy turn piece set. MP-US-4537EXT-D (ext) MP-US-4537TPC (int) (Not shown)
CMP-US-4537AD Active dummy set. MP-US-4537EXT-D (ext) MP-US-4537P (int)
CMP-US-4537FD Full dummy set. MP-US-4537EXT-D (ext) MP-US-4537D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-41
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
4632 DECO US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4632 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4632PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4632AD – Complete set with spindle. – Active dummy.
CMP-US-4632FD – Trim set only. – Full dummy.
13 1
/2"
2"2"
13 1
/2"
2"2"
13 1
/2"
2"2"
13 1
/2"
2"2"
8 5/
8"
8 5/
8"
8 5/
8"
8 5/
8"
8 5/
8"
8 5/
8"
8 5/
8"
8 5/
8"
CMP-US-4632 Keyed US cylinder entry set. MP-US-4632EXT (ext) MP-US-4632TPC (int)
CMP-US-4632PF Patio function US cylinder entry set. MP-US-4632EXT-PF (ext) MP-US-4632TPC (int)
CMP-US-4632AD-PF Active dummy turn piece set. MP-US-4632EXT-D (ext) MP-US-4632TPC (int) (Not shown)
CMP-US-4632AD Active dummy set. MP-US-4632EXT-D (ext) MP-US-4632P (int)
CMP-US-4632FD Full dummy set. MP-US-4632EXT-D (ext) MP-US-4632D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-42
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
4633 DECO US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4633 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4633PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4633AD – Complete set with spindle. – Active dummy.
CMP-US-4633FD – Trim set only. – Full dummy.
13 1
/2"
2"2"
4 7/
8"
4 7/
8"
13 1
/2"
2"2"
4 7/
8"
4 7/
8"
13 1
/2"
2"2"
4 7/
8"
4 7/
8"
13 1
/2"
2"2"
4 7/
8"
4 7/
8"
CMP-US-4633 Keyed US cylinder entry set. MP-US-4633EXT (ext) MP-US-4633TPC (int)
CMP-US-4633PF Patio function US cylinder entry set. MP-US-4633EXT-PF (ext) MP-US-4633TPC (int)
CMP-US-4633AD-PF Active dummy turn piece set. MP-US-4633EXT-D (ext) MP-US-4633TPC (int) (Not shown)
CMP-US-4633AD Active dummy set. MP-US-4633EXT-D (ext) MP-US-4633P (int)
CMP-US-4633FD Full dummy set. MP-US-4633EXT-D (ext) MP-US-4633D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-43
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
4732 HAMPTON US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4732 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4732PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4732AD – Complete set with spindle. – Active dummy.
CMP-US-4732FD – Trim set only. – Full dummy.
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
CMP-US-4732 Keyed US cylinder entry set. MP-US-4732EXT (ext) MP-US-4732TPC (int)
CMP-US-4732PF Patio function US cylinder entry set. MP-US-4732EXT-PF (ext) MP-US-4732TPC (int)
CMP-US-4732AD-PF Active dummy turn piece set. MP-US-4732EXT-D (ext) MP-US-4732TPC (int) (Not shown)
CMP-US-4732AD Active dummy set. MP-US-4732EXT-D (ext) MP-US-4732P (int)
CMP-US-4732FD Full dummy set. MP-US-4732EXT-D (ext) MP-US-4732D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-44
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
4733 HAMPTON US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-4733 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-4733PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-4733AD – Complete set with spindle. – Active dummy.
CMP-US-4733FD – Trim set only. – Full dummy.
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
13 1
/2"
2 3/8"2 3/8"
5"5" 5"5"5" 5"5"5"
CMP-US-4733 Keyed US cylinder entry set. MP-US-4733EXT (ext) MP-US-4733TPC (int)
CMP-US-4733PF Patio function US cylinder entry set. MP-US-4733EXT-PF (ext) MP-US-4733TPC (int)
CMP-US-4733AD-PF Active dummy turn piece set. MP-US-4733EXT-D (ext) MP-US-4733TPC (int) (Not shown)
CMP-US-4733AD Active dummy set. MP-US-4733EXT-D (ext) MP-US-4733P (int)
CMP-US-4733FD Full dummy set. MP-US-4733EXT-D (ext) MP-US-4733D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-45
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
1430 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-1430 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1430PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1430AD – Complete set with spindle. – Active dummy.
CMP-US-1430FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
CMP-US-1430 Keyed US cylinder entry set. MP-US-1430 (ext) MP-US-1430TPC (int)
CMP-US-1430PF Patio function US cylinder entry set. MP-US-1430EXT-PF (ext) MP-US-1430TPC (int)
CMP-US-1430AD-PF Active dummy turn piece set. MP-US-1430EXT-D (ext) MP-US-1430TPC (int) (Not shown)
CMP-US-1430AD Active dummy set. MP-US-1430EXT-D (ext) MP-US-1430P (int)
CMP-US-1430FD Full dummy set. MP-US-1430EXT-D (ext) MP-US-1430D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-46
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
1431 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-1431 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1431PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1431AD – Complete set with spindle. – Active dummy.
CMP-US-1431FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
4"4" 4"4"4" 4"4"4"
CMP-US-1431 Keyed US cylinder entry set. MP-US-1431 (ext) MP-US-1431TPC (int)
CMP-US-1431PF Patio function US cylinder entry set. MP-US-1431EXT-PF (ext) MP-US-1431TPC (int)
CMP-US-1431AD-PF Active dummy turn piece set. MP-US-1431EXT-D (ext) MP-US-1431TPC (int) (Not shown)
CMP-US-1431AD Active dummy set. MP-US-1431EXT-D (ext) MP-US-1431P (int)
CMP-US-1431FD Full dummy set. MP-US-1431EXT-D (ext) MP-US-1431D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-47
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
1432 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1432 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1432PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1432AD – Complete set with spindle. – Active dummy.
CMP-US-1432FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
CMP-US-1432 Keyed US cylinder entry set. MP-US-1432 (ext) MP-US-1432TPC (int)
CMP-US-1432PF Patio function US cylinder entry set. MP-US-1432EXT-PF (ext) MP-US-1432TPC (int)
CMP-US-1432AD-PF Active dummy turn piece set. MP-US-1432EXT-D (ext) MP-US-1432TPC (int) (Not shown)
CMP-US-1432AD Active dummy set. MP-US-1432EXT-D (ext) MP-US-1432P (int)
CMP-US-1432FD Full dummy set. MP-US-1432EXT-D (ext) MP-US-1432D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-48
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
1433 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1433 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1433PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1433AD – Complete set with spindle. – Active dummy.
CMP-US-1433FD – Trim set only. – Full dummy.
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
CMP-US-1433 Keyed US cylinder entry set. MP-US-1433EXT (ext) MP-US-1433TPC (int)
CMP-US-1433PF Patio function US cylinder entry set. MP-US-1433EXT-PF (ext) MP-US-1433TPC (int)
CMP-US-1433AD-PF Active dummy turn piece set. MP-US-1433EXT-D (ext) MP-US-1433TPC (int) (Not shown)
CMP-US-1433AD Active dummy set. MP-US-1433EXT-D (ext) MP-US-1433P (int)
CMP-US-1433FD Full dummy set. MP-US-1433EXT-D (ext) MP-US-1433D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-49
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1435 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1435 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1435PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1435AD – Complete set with spindle. – Active dummy.
CMP-US-1435FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4" 4" 4" 4" 4" 4" 4" 4"
CMP-US-1435 Keyed US cylinder entry set. MP-US-1435EXT (ext) MP-US-1435TPC (int)
CMP-US-1435PF Patio function US cylinder entry set. MP-US-1435EXT-PF (ext) MP-US-1435TPC (int)
CMP-US-1435AD-PF Active dummy turn piece set. MP-US-1435EXT-D (ext) MP-US-1435TPC (int) (Not shown)
CMP-US-1435AD Active dummy set. MP-US-1435EXT-D (ext) MP-US-1435P (int)
CMP-US-1435FD Full dummy set. MP-US-1435EXT-D (ext) MP-US-1435D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-50
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1437 CORRUGATED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1437 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1437PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1437AD – Complete set with spindle. – Active dummy.
CMP-US-1437FD – Trim set only. – Full dummy.
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
11 1
/2"
2 1/2"2 1/2"
4"4" 4"4"4" 4"4"4"
CMP-US-1437 Keyed US cylinder entry set. MP-US-1437EXT (ext) MP-US-1437TPC (int)
CMP-US-1437PF Patio function US cylinder entry set. MP-US-1437EXT-PF (ext) MP-US-1437TPC (int)
CMP-US-1437AD-PF Active dummy turn piece set. MP-US-1437EXT-D (ext) MP-US-1437TPC (int) (Not shown)
CMP-US-1437AD Active dummy set. MP-US-1437EXT-D (ext) MP-US-1437P (int)
CMP-US-1437FD Full dummy set. MP-US-1437EXT-D (ext) MP-US-1437D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-51
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
1532 BANDBOX US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1532 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1532PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1532AD – Complete set with spindle. – Active dummy.
CMP-US-1532FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"1/
4"
1/4"
1/4"
1/4"
CMP-US-1532 Keyed US cylinder entry set. MP-US-1532EXT (ext) MP-US-1532TPC (int)
CMP-US-1532PF Patio function US cylinder entry set. MP-US-1532EXT-PF (ext) MP-US-1532TPC (int)
CMP-US-1532AD-PF Active dummy turn piece set. MP-US-1532EXT-D (ext) MP-US-1532TPC (int) (Not shown)
CMP-US-1532AD Active dummy set. MP-US-1532EXT-D (ext) MP-US-1532P (int)
CMP-US-1532FD Full dummy set. MP-US-1532EXT-D (ext) MP-US-1532D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-52
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1533 BANDBOX US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1533 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1533PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1533AD – Complete set with spindle. – Active dummy.
CMP-US-1533FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4"4" 4"4"4" 4"4"4"1/
4"
1/4"
1/4"
1/4"
CMP-US-1533 Keyed US cylinder entry set. MP-US-1533EXT (ext) MP-US-1533TPC (int)
CMP-US-1533PF Patio function US cylinder entry set. MP-US-1533EXT-PF (ext) MP-US-1533TPC (int)
CMP-US-1533AD-PF Active dummy turn piece set. MP-US-1533EXT-D (ext) MP-US-1533TPC (int) (Not shown)
CMP-US-1533AD Active dummy set. MP-US-1533EXT-D (ext) MP-US-1533P (int)
CMP-US-1533FD Full dummy set. MP-US-1533EXT-D (ext) MP-US-1533D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-53
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
HP1532 HAND PEENED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-HP1532 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-HP1532PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-HP1532AD – Complete set with spindle. – Active dummy.
CMP-US-HP1532FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
1/4"
1/4"
1/4"
1/4"
CMP-US-HP1532 Keyed US cylinder entry set. MP-US-HP1532EXT (ext) MP-US-HP1532TPC (int)
CMP-US-HP1532PF Patio function US cylinder entry set. MP-US-HP1532EXT-PF (ext) MP-US-HP1532TPC (int)
CMP-US-HP1532AD-PF Active dummy turn piece set. MP-US-HP1532EXT-D (ext) MP-US-HP1532TPC (int) (Not shown)
CMP-US-HP1532AD Active dummy set. MP-US-HP1532EXT-D (ext) MP-US-HP1532P (int)
CMP-US-HP1532FD Full dummy set. MP-US-HP1532EXT-D (ext) MP-US-HP1532D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-54
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
HP1533 HAND PEENED US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-HP1533 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-HP1533PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-HP1533AD – Complete set with spindle. – Active dummy.
CMP-US-HP1533FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4"4" 4"4"4"4"4" 4"
1/4"
1/4"
1/4"
1/4"
CMP-US-HP1533 Keyed US cylinder entry set. MP-US-HP1533EXT (ext) MP-US-HP1533TPC (int)
CMP-US-HP1533PF Patio function US cylinder entry set. MP-US-HP1533EXT-PF (ext) MP-US-HP1533TPC (int)
CMP-US-HP1533AD-PF Active dummy turn piece set. MP-US-HP1533EXT-D (ext) MP-US-HP1533TPC (int) (Not shown)
CMP-US-HP1533AD Active dummy set. MP-US-HP1533EXT-D (ext) MP-US-HP1533P (int)
CMP-US-HP1533FD Full dummy set. MP-US-HP1533EXT-D (ext) MP-US-HP1533D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-55
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
WH1632 HORIZONTAL WOOD INLAY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CMP-US-WH1632 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-W1600. – Single cylinder.
CMP-US-WH1632PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-W1600. – Patio function.
CMP-US-WH1632AD – Complete set with spindle. – Active dummy.
CMP-US-WH1632FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
CMP-US-WH1632 Keyed US cylinder entry set. MP-US-WH1632EXT (ext) MP-US-WH1632TPC (int)
CMP-US-WH1632PF Patio function US cylinder entry set. MP-US-WH1632EXT-PF (ext) MP-US-WH1632TPC (int)
CMP-US-WH1632AD-PF Active dummy turn piece set. MP-US-WH1632EXT-D (ext) MP-US-WH1632TPC (int) (Not shown)
CMP-US-WH1632AD Active dummy set. MP-US-WH1632EXT-D (ext) MP-US-WH1632P (int)
CMP-US-WH1632FD Full dummy set. MP-US-WH1632EXT-D (ext) MP-US-WH1632D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-56
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
WH1633 HORIZONTAL WOOD INLAY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CMP-US-WH1633 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-W1600. – Single cylinder.
CMP-US-WH1633PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-W1600. – Patio function.
CMP-US-WH1633AD – Complete set with spindle. – Active dummy.
CMP-US-WH1633FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4" 4" 4" 4" 4"4"4"4"
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
CMP-US-WH1633 Keyed US cylinder entry set. MP-US-WH1633EXT (ext) MP-US-WH1633TPC (int)
CMP-US-WH1633PF Patio function US cylinder entry set. MP-US-WH1633EXT-PF (ext) MP-US-WH1633TPC (int)
CMP-US-WH1633AD-PF Active dummy turn piece set. MP-US-WH1633EXT-D (ext) MP-US-WH1633TPC (int) (Not shown)
CMP-US-WH1633AD Active dummy set. MP-US-WH1633EXT-D (ext) MP-US-WH1633P (int)
CMP-US-WH1633FD Full dummy set. MP-US-WH1633EXT-D (ext) MP-US-WH1633D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-57
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
WV1632 VERTICAL WOOD INLAY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CMP-US-WV1632 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-W1600. – Single cylinder.
CMP-US-WV1632PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-W1600. – Patio function.
CMP-US-WV1632AD – Complete set with spindle. – Active dummy.
CMP-US-WV1632FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
CMP-US-WV1632 Keyed US cylinder entry set. MP-US-WV1632EXT (ext) MP-US-WV1632TPC (int)
CMP-US-WV1632PF Patio function US cylinder entry set. MP-US-WV1632EXT-PF (ext) MP-US-WV1632TPC (int)
CMP-US-WV1632AD-PF Active dummy turn piece set. MP-US-WV1632EXT-D (ext) MP-US-WV1632TPC (int) (Not shown)
CMP-US-WV1632AD Active dummy set. MP-US-WV1632EXT-D (ext) MP-US-WV1632P (int)
CMP-US-WV1632FD Full dummy set. MP-US-WV1632EXT-D (ext) MP-US-WV1632D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-58
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
WV1633 VERTICAL WOOD INLAY US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CMP-US-WV1633 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-W1600. – Single cylinder.
CMP-US-WV1633PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-W1600. – Patio function.
CMP-US-WV1633AD – Complete set with spindle. – Active dummy.
CMP-US-WV1633FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4" 4" 4" 4" 4"4"4"4"
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
CMP-US-WV1633 Keyed US cylinder entry set. MP-US-WV1633EXT (ext) MP-US-WV1633TPC (int)
CMP-US-WV1633PF Patio function US cylinder entry set. MP-US-WV1633EXT-PF (ext) MP-US-WV1633TPC (int)
CMP-US-WV1633AD-PF Active dummy turn piece set. MP-US-WV1633EXT-D (ext) MP-US-WV1633TPC (int) (Not shown)
CMP-US-WV1633AD Active dummy set. MP-US-WV1633EXT-D (ext) MP-US-WV1633P (int)
CMP-US-WV1633FD Full dummy set. MP-US-WV1633EXT-D (ext) MP-US-WV1633D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-59
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
1932 CORDUROY US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-1932 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1932PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1932AD – Complete set with spindle. – Active dummy.
CMP-US-1932FD – Trim set only. – Full dummy.
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-1932 Keyed US cylinder entry set. MP-US-1932EXT (ext) MP-US-1932TPC (int)
CMP-US-1932PF Patio function US cylinder entry set. MP-US-1932EXT-PF (ext) MP-US-1932TPC (int)
CMP-US-1932AD-PF Active dummy turn piece set. MP-US-1932EXT-D (ext) MP-US-1932TPC (int) (Not shown)
CMP-US-1932AD Active dummy set. MP-US-1932EXT-D (ext) MP-US-1932P (int)
CMP-US-1932FD Full dummy set. MP-US-1932EXT-D (ext) MP-US-1932D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-60
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
1933 CORDUROY US CYLINDER MULTI-POINT RETROFIT SETS
11 1
/2"
11 1
/2"
11 1
/2"
11 1
/2"
CMP-US-1933 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1933PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1933AD – Complete set with spindle. – Active dummy.
CMP-US-1933FD – Trim set only. – Full dummy.
1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"
4" 4" 4" 4" 4"4"4"4"
CMP-US-1933 Keyed US cylinder entry set. MP-US-1933EXT (ext) MP-US-1933TPC (int)
CMP-US-1933PF Patio function US cylinder entry set. MP-US-1933EXT-PF (ext) MP-US-1933TPC (int)
CMP-US-1933AD-PF Active dummy turn piece set. MP-US-1933EXT-D (ext) MP-US-1933TPC (int) (Not shown)
CMP-US-1933AD Active dummy set. MP-US-1933EXT-D (ext) MP-US-1933P (int)
CMP-US-1933FD Full dummy set. MP-US-1933EXT-D (ext) MP-US-1933D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-61
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
CMP-US-1934 Keyed US cylinder entry set. MP-US-1934EXT (ext) MP-US-1934TPC (int)
CMP-US-1934PF Patio function US cylinder entry set. MP-US-1934EXT-PF (ext) MP-US-1934TPC (int)
CMP-US-1934AD-PF Active dummy turn piece set. MP-US-1934EXT-D (ext) MP-US-1934TPC (int) (Not shown)
CMP-US-1934AD Active dummy set. MP-US-1934EXT-D (ext) MP-US-1934P (int)
CMP-US-1934FD Full dummy set. MP-US-1934EXT-D (ext) MP-US-1934D (int)
1934 CORDUROY US CYLINDER MULTI-POINT RETROFIT SETS
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
11 1
/2"
CMP-US-1934 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1934PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1934AD – Complete set with spindle. – Active dummy.
CMP-US-1934FD – Trim set only. – Full dummy.
2"2"
7 1/
2"
7 1/
2" 11 1
/2"
2"2"
7 1/
2"
7 1/
2" 11 1
/2"
2"2"
7 1/
2"
7 1/
2" 11 1
/2"
2"2"
7 1/
2"
7 1/
2"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-62
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
CMP-US-1935 Keyed US cylinder entry set. MP-US-1935EXT (ext) MP-US-1935TPC (int)
CMP-US-1935PF Patio function US cylinder entry set. MP-US-1935EXT-PF (ext) MP-US-1935TPC (int)
CMP-US-1935AD-PF Active dummy turn piece set. MP-US-1935EXT-D (ext) MP-US-1935TPC (int) (Not shown)
CMP-US-1935AD Active dummy set. MP-US-1935EXT-D (ext) MP-US-1935P (int)
CMP-US-1935FD Full dummy set. MP-US-1935EXT-D (ext) MP-US-1935D (int)
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
1935 CORDUROY US CYLINDER MULTI-POINT RETROFIT SETS
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
11 1
/2"
CMP-US-1935 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-1935PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-1935AD – Complete set with spindle. – Active dummy.
CMP-US-1935FD – Trim set only. – Full dummy.
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
11 1
/2"
2"2"
4"4"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-63
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-2130 Keyed US cylinder entry set. MP-US-2130EXT (ext) MP-US-2130TPC (int)
CMP-US-2130PF Patio function US cylinder entry set. MP-US-2130EXT-PF (ext) MP-US-2130TPC (int)
CMP-US-2130AD-PF Active dummy turn piece set. MP-US-2130EXT-D (ext) MP-US-2130TPC (int) (Not shown)
CMP-US-2130AD Active dummy set. MP-US-2130EXT-D (ext) MP-US-2130P (int)
CMP-US-2130FD Full dummy set. MP-US-2130EXT-D (ext) MP-US-2130D (int)
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
2130 MESA US CYLINDER MULTI-POINT RETROFIT SETS
1 1/2"
CMP-US-2130 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2130PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2130AD – Complete set with spindle. – Active dummy.
CMP-US-2130FD – Trim set only. – Full dummy.
1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"
11 1
/2"
11 1
/2"
11 1
/2"
11 1
/2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-64
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
CMP-US-2131 Keyed US cylinder entry set. MP-US-2131EXT (ext) MP-US-2131TPC (int)
CMP-US-2131PF Patio function US cylinder entry set. MP-US-2131EXT-PF (ext) MP-US-2131TPC (int)
CMP-US-2131AD-PF Active dummy turn piece set. MP-US-2131EXT-D (ext) MP-US-2131TPC (int) (Not shown)
CMP-US-2131AD Active dummy set. MP-US-2131EXT-D (ext) MP-US-2131P (int)
CMP-US-2131FD Full dummy set. MP-US-2131EXT-D (ext) MP-US-2131D (int)
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
2131 MESA US CYLINDER MULTI-POINT RETROFIT SETS
1 1/2"
CMP-US-2131 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2131PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2131AD – Complete set with spindle. – Active dummy.
CMP-US-2131FD – Trim set only. – Full dummy.
1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"
11 1
/2"
11 1
/2"
11 1
/2"
11 1
/2"
4"4" 4"4"4" 4"4"4"
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-65
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
2132 MESA US CYLINDER MULTI-POINT RETROFIT SETS
1 3/4"
CMP-US-2132 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2132PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2132AD – Complete set with spindle. – Active dummy.
CMP-US-2132FD – Trim set only. – Full dummy.
1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"1 3/4" 1 3/4"1 3/4" 1 3/4"1 3/4" 1 3/4"1 3/4"
11 1
/2"
11 1
/2"
11 1
/2"
11 1
/2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
CMP-US-2132 Keyed US cylinder entry set. MP-US-2132EXT (ext) MP-US-2132TPC (int)
CMP-US-2132PF Patio function US cylinder entry set. MP-US-2132EXT-PF (ext) MP-US-2132TPC (int)
CMP-US-2132AD-PF Active dummy turn piece set. MP-US-2132EXT-D (ext) MP-US-2132TPC (int) (Not shown)
CMP-US-2132AD Active dummy set. MP-US-2132EXT-D (ext) MP-US-2132P (int)
CMP-US-2132FD Full dummy set. MP-US-2132EXT-D (ext) MP-US-2132D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-66
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
2133 MESA US CYLINDER MULTI-POINT RETROFIT SETS
1 3/4"
CMP-US-2133 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2133PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2133AD – Complete set with spindle. – Active dummy.
CMP-US-2133FD – Trim set only. – Full dummy.
1 1/2"1 1/2" 1 1/2"1 1/2" 1 1/2"1 1/2"
1 3/4" 1 3/4"1 3/4" 1 3/4"1 3/4" 1 3/4"1 3/4"11
1/2
"
11 1
/2"
11 1
/2"
11 1
/2"
4"4" 4"4"4" 4"4"4"
CMP-US-2133 Keyed US cylinder entry set. MP-US-2133EXT (ext) MP-US-2133TPC (int)
CMP-US-2133PF Patio function US cylinder entry set. MP-US-2133EXT-PF (ext) MP-US-2133TPC (int)
CMP-US-2133AD-PF Active dummy turn piece set. MP-US-2133EXT-D (ext) MP-US-2133TPC (int) (Not shown)
CMP-US-2133AD Active dummy set. MP-US-2133EXT-D (ext) MP-US-2133P (int)
CMP-US-2133FD Full dummy set. MP-US-2133EXT-D (ext) MP-US-2133D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-67
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-2236 Keyed US cylinder entry set. MP-US-2236EXT (ext) MP-US-2236TPC (int)
CMP-US-2236PF Patio function US cylinder entry set. MP-US-2236EXT-PF (ext) MP-US-2236TPC (int)
CMP-US-2236AD-PF Active dummy turn piece set. MP-US-2236EXT-D (ext) MP-US-2236TPC (int) (Not shown)
CMP-US-2236AD Active dummy set. MP-US-2236EXT-D (ext) MP-US-2236P (int)
CMP-US-2236FD Full dummy set. MP-US-2236EXT-D (ext) MP-US-2236D (int)
2236 BURLAP US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-2236 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2236PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2236AD – Complete set with spindle. – Active dummy.
CMP-US-2236FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-68
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.Multi-point retrofit sets for Andersen Doors NOT available in keyed function.
CMP-US-2237 Keyed US cylinder entry set. MP-US-2237EXT (ext) MP-US-2237TPC (int)
CMP-US-2237PF Patio function US cylinder entry set. MP-US-2237EXT-PF (ext) MP-US-2237TPC (int)
CMP-US-2237AD-PF Active dummy turn piece set. MP-US-2237EXT-D (ext) MP-US-2237TPC (int) (Not shown)
CMP-US-2237AD Active dummy set. MP-US-2237EXT-D (ext) MP-US-2237P (int)
CMP-US-2237FD Full dummy set. MP-US-2237EXT-D (ext) MP-US-2237D (int)
2237 BURLAP US CYLINDER MULTI-POINT RETROFIT SETS
CMP-US-2237 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-2237PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-2237AD – Complete set with spindle. – Active dummy.
CMP-US-2237FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4"4" 4"4"4" 4"4"4"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-69
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N980 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-N980 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-N980PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N980AD – Complete set with spindle. – Active dummy.
CMP-US-N980FD – Trim set only. – Full dummy.
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
10 1
/2"
1 1/2"1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-N980 Keyed US cylinder entry set. MP-US-N980EXT (ext) MP-US-N980TPC (int)
CMP-US-N980PF Patio function US cylinder entry set. MP-US-N980EXT-PF (ext) MP-US-N980TPC (int)
CMP-US-N980AD-PF Active dummy turn piece set. MP-US-N980EXT-D (ext) MP-US-N980TPC (int) (Not shown)
CMP-US-N980AD Active dummy set. MP-US-N980EXT-D (ext) MP-US-N980P (int)
CMP-US-N980FD Full dummy set. MP-US-N980EXT-D (ext) MP-US-N980D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-70
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N981 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
CMP-US-N981 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-N981PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N981AD – Complete set with spindle. – Active dummy.
CMP-US-N981FD – Trim set only. – Full dummy.
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
11 1
/2"
1 1/2"1 1/2"
4"4" 4"4"4" 4"4"4"
CMP-US-N981 Keyed US cylinder entry set. MP-US-N981EXT (ext) MP-US-N981TPC (int)
CMP-US-N981PF Patio function US cylinder entry set. MP-US-N981EXT-PF (ext) MP-US-N981TPC (int)
CMP-US-N981AD-PF Active dummy turn piece set. MP-US-N981EXT-D (ext) MP-US-N981TPC (int) (Not shown)
CMP-US-N981AD Active dummy set. MP-US-N981EXT-D (ext) MP-US-N981P (int)
CMP-US-N981FD Full dummy set. MP-US-N981EXT-D (ext) MP-US-N981D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-71
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N982 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-N982 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-N982PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N982AD – Complete set with spindle. – Active dummy.
CMP-US-N982FD – Trim set only. – Full dummy.
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
10 1
/2"
2"2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
CMP-US-N982 Keyed US cylinder entry set. MP-US-N982EXT (ext) MP-US-N982TPC (int)
CMP-US-N982PF Patio function US cylinder entry set. MP-US-N982EXT-PF (ext) MP-US-N982TPC (int)
CMP-US-N982AD-PF Active dummy turn piece set. MP-US-N982EXT-D (ext) MP-US-N982TPC (int) (Not shown)
CMP-US-N982AD Active dummy set. MP-US-N982EXT-D (ext) MP-US-N982P (int)
CMP-US-N982FD Full dummy set. MP-US-N982EXT-D (ext) MP-US-N982D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-72
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N983 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.** Multi-point retrofit sets for Andersen doors NOT available in keyed function.
CMP-US-N983 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Single cylinder.
CMP-US-N983PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N983AD – Complete set with spindle. – Active dummy.
CMP-US-N983FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
4"4" 4"4"4" 4"4"4"
CMP-US-N983 Keyed US cylinder entry set. MP-US-N983EXT (ext) MP-US-N983TPC (int)
CMP-US-N983PF Patio function US cylinder entry set. MP-US-N983EXT-PF (ext) MP-US-N983TPC (int)
CMP-US-N983AD-PF Active dummy turn piece set. MP-US-N983EXT-D (ext) MP-US-N983TPC (int) (Not shown)
CMP-US-N983AD Active dummy set. MP-US-N983EXT-D (ext) MP-US-N983P (int)
CMP-US-N983FD Full dummy set. MP-US-N983EXT-D (ext) MP-US-N983D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-73
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N984 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-N984 – Complete set with keyed US
cylinder, SVB turn piece and spindle.
– Single cylinder.
CMP-US-N984PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N984PF-D – Trim set with active SVB turn piece and dummy levers.
CMP-US-N984FD – Trim set only. – Full dummy.
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
12"
1 1/2"1 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"6" 6" 6" 6"
CMP-US-N984 Keyed US cylinder entry set. MP-US-N984EXT (ext) MP-US-N984TPC (int)
CMP-US-N984PF Patio function US cylinder entry set. MP-US-N984EXT-PF (ext) MP-US-N984TPC (int)
CMP-US-N984PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-N984EXT-D (ext) MP-US-N984TPC-D (int)
CMP-US-N984FD Full dummy set. MP-US-N984EXT-D (ext) MP-US-N984D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-74
Revised 02/01/16
Illustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
N985 NOVUS US CYLINDER MULTI-POINT RETROFIT SETS
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 6” center-to-center spacing.
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-N985 – Complete set with keyed US
cylinder, SVB turn piece and spindle.
– Single cylinder.
CMP-US-N985PF – Complete set with SVB turn
piece and spindle. – Patio function.
CMP-US-N985PF-D – Trim set with active SVB turn piece and dummy levers.
CMP-US-N985FD – Trim set only. – Full dummy.
12"
2"2"
12"
2"2"
12"
2"2"
12"
2"2"
3"3" 3"3"3" 3"3"3"6" 6" 6" 6"
CMP-US-N985 Keyed US cylinder entry set. MP-US-N985EXT (ext) MP-US-N985TPC (int)
CMP-US-N985PF Patio function US cylinder entry set. MP-US-N985EXT-PF (ext) MP-US-N985TPC (int)
CMP-US-N985PF-D Patio function TPC/dummy levers. Passive panel set. MP-US-N985EXT-D (ext) MP-US-N985TPC-D (int)
CMP-US-N985FD Full dummy set. MP-US-N985EXT-D (ext) MP-US-N985D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-75
Revised 02/01/16
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
2434 RIDGE BURLAP US CYLINDER MULTI-POINT RETROFIT SETSIllustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-2434 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-2434PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-2434AD – Complete set with spindle. – Active dummy.
CMP-US-2434FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
11 1
/2"
2"2"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
CMP-US-2434 Keyed US cylinder entry set. MP-US-2434EXT (ext) MP-US-2434TPC (int)
CMP-US-2434PF Patio function US cylinder entry set. MP-US-2434EXT-PF (ext) MP-US-2434TPC (int)
CMP-US-2434AD-PF Active dummy turn piece set. MP-US-2434EXT-D (ext) MP-US-2434TPC (int) (Not shown)
CMP-US-2434AD Active dummy set. MP-US-2434EXT-D (ext) MP-US-2434P (int)
CMP-US-2434FD Full dummy set. MP-US-2434EXT-D (ext) MP-US-2434D (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
10-76
Revised 02/01/16
ALL SUN VALLEY BRONZE US CYLINDER RETROFIT SETS REQUIRE THAT THE DOOR BE COUNTER BORED FOR SPRING ASSIST AND DRILLED FOR THRU-BOLTING ON SITE. SUN VALLEY BRONZE IS NOT RESPONSIBLE FOR DOORS BORED OR DRILLED IMPROPERLY.
2435 RIDGE BURLAP US CYLINDER MULTI-POINT RETROFIT SETSIllustrations are for demonstration purposes only. Available with any Sun Valley Bronze lever.
Complete multi-point sets with plates, levers, US cylinder and spindle. No lock included. 92mm center-to-center spacing.
All exterior multi-point trim is available with gasket (upcharge applies).UC-GASKETING
Door handing and thickness is required for all multi-point door retrofit sets.Always specify lever design.All cylinders are 5-pin Schlage C keyways.Re-keying to other cylinders is available.*Always specify door and lock manufacturer.
CMP-US-2435 – Complete set with keyed US
cylinder, SVB turn piece and spindle. – Shown with TPC-306. – Single cylinder.
CMP-US-2435PF – Complete set with SVB turn
piece and spindle. – Shown with TPC-306. – Patio function.
CMP-US-2435AD – Complete set with spindle. – Active dummy.
CMP-US-2435FD – Trim set only. – Full dummy.
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
11 1
/2"
2"2"
4 1/
8"
4 1/
8"
CMP-US-2435 Keyed US cylinder entry set. MP-US-2435EXT (ext) MP-US-2435TPC (int)
CMP-US-2435PF Patio function US cylinder entry set. MP-US-2435EXT-PF (ext) MP-US-2435TPC (int)
CMP-US-2435AD-PF Active dummy turn piece set. MP-US-2435EXT-D (ext) MP-US-2435TPC (int) (Not shown)
CMP-US-2435AD Active dummy set. MP-US-2435EXT-D (ext) MP-US-2435P (int)
CMP-US-2435FD Full dummy set. MP-US-2435EXT-D (ext) MP-US-2435D (int)