sparkvue® windows /android user guide · ikes – inspiring knowledge education software –...
TRANSCRIPT
ikES – inspiring knowledge Education Software – SPARKvue® 1
SPARKvue®
Windows /Android
User guide
ikES – inspiring knowledge Education Software – SPARKvue® 2
Table of Contents
1. Limitation of Liability 3
2. Getting started with SPARKvue® 3
1.1 Benefits in education 3
1.2 Accessing the application 4
1.3 Main features 4
3. Home Screen 5
2.1 Main screen and elements 5
4. Show a SPARKlab 10
3.1 Main screen and elements 10
3.2 Show a SPARKlab 16
3.3 Calibrate a sensor 16
3.4 Tare a sensor 19
3.5 Set sampling mode 21
3.6 Set an automatic stop condition 22
3.7 Start recording a run of periodically sampled data 24
4. Open a SPARKlab 56
4.1 Open an experiment 56
4.2 Open saved work 57
5. Build a SPARKlab 59
5.1 Main screen and elements 59
5.2 Start a new SPARKlab page 64
5.3 Delete a SPARKlab page 65
5.4 Add a background image 66
5.5 Add elements to a SPARKlab page 67
5.6 Create a new line graph display 68
5.7 Create a new bar graph display 69
5.8 Add bars and bar names in bar graphs 72
5.9 Create a new table display 74
5.10 Create a new digits display 75
5.11 Create a new meter display 77
5.12 Add a text box 79
5.13 Add a media file 80
5.14 Remove or replace a media file 81
5.15 Create an assessment 82
5.16 Create a manual data set 84
ikES – inspiring knowledge Education Software – SPARKvue® 3
1. Limitation of Liability
Despite reasonable efforts made to ensure the accuracy of this manual, the
manufacturer and distributor assume no liability resulting from errors or omissions in
this manual or any software that may be provided in association with this document. or
the use of the information contained herein.
This document and the software described in it are furnished under license and may
only be used or copied in accordance with the terms of the license. The information in
this document is furnished for informational use only, is subject to change without
notice.
J P Sá Couto, SA is not responsible for the performance or support of third-party
products and does not make any representations or warranties whatsoever regarding
quality, reliability, functionality, or compatibility of these devices or products. Third party
names and brands may be claimed as the property of others.
2. Getting started with SPARKvue®
SPARKvue® is a tool for data analysis that facilitates experimentation through use of
sensors. It enhances the development of critical thinking skills and the generation of
new lines of research from data capture and its digitization for study and analysis.
1.1 Benefits in education
Allows data collection through sensors for the study of science and math concepts.
Simplifies data analysis through graphical and other functions.
Facilitates the comparison of data and results for study and understanding.
Reduces the amount of investment on expensive laboratory equipment.
Facilitates use of competitive tools for data analysis in various disciplines like biology, natural sciences, chemistry, physics, etc.
Establishes the relationship of phenomena from hypothetical scenarios.
Helps with monitoring and changing conditions of experiment approach from different perspectives.
ikES – inspiring knowledge Education Software – SPARKvue® 4
1.2 Accessing the application
1. Press the SPARKvue® icon to access the home screen.
2. Choose a measurement and press Show to start data collection.
1.3 Main features
On-board acceleration sensor | Registers acceleration in x, y, z axes when the
device is in motion.
On-board temperature sensor | Measures and records the temperature.
Back camera | Captures an image sequence using the back camera.
On-board microphone | Measures and records sound level.
On-board light sensor | Measures and records luminosity level.
Front camera | Capture an image sequence using the front camera.
MAIN
MAIN
ikES – inspiring knowledge Education Software – SPARKvue® 5
3. Home Screen
The SPARKvue®® home screen displays the internal and external sensors which are
correctly connected to the system to start data collection.
2.1 Main screen and elements
Windows Android
Device tools Shows information about software version as well as different
configuration options such as SPARKvue® language, available
sensor interfaces, and file management.
●
●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces via
Bluetooth.
●
●
Manage files
Contains commands to manage files, such as copy, move, and
delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue®
Shows information about software license, version, and support
contact.
●
●
Help
Shows a user’s guide.
●
●
Open
Opens a previously saved experiment or an embedded
SPARKlab.
●
●
Show
Starts data recording once a measurement has been selected.
●
●
Build
Allows users to build a custom SPARKlab.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 6
1. SPARKlabs
2. Sensors
3. Vice tools
4. Help
5. Open
6. Show
7. Build
2.2 Select language
1
5 4
1 2
3
4
5 6 7
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 7
1. Press Device Tools
2. Press Languages
3. Select a Language.
4. Press OK.
1
3
4
PFigure 1
Selection of language in SPARKvue®. The selected language will be available the next time SPARKvue® is restarted.
ikES – inspiring knowledge Education Software – SPARKvue® 10
4. Show a SPARKlab
The Show function is the fastest way to record data and display it in a graph, table,
digits display, and meter.
3.1 Main screen and elements
Windows Android
Home
Returns to home page.
●
●
New page
Adds a new page within a SPARKlab.
●
●
Delete Page
Deletes the selected page. This action cannot be undone.
●
●
Device tools
Shows information about software version as well as different configuration options such as SPARKvue® language, available sensor interfaces, and file management.
●
●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces
via Bluetooth.
●
●
Manage files
Contains commands to manage files, such as copy,
move, and delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue®
Shows information about software license, version,
and support contact.
●
●
Sharing
Shows different options to save or export data collection as a
SPARKlab page, journal or image.
●
●
Save file
Saves a SPARKlab. ● ●
Save File as
Saves a SPARKlab allowing users to select name and
location.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 11
Windows Android
Online Storage services
Saves a SPARKlab in an online service. ● ●
Export data
Saves a SPARKlab as a tab-delimited text file. ● ●
Export Journal
Saves the journal in a format that can be viewed in a web browser.
●
●
Print Journal
Allows users to print out the journal. ●
Export images
Saves a snapshot as an image. ● ●
Journal
Keeps a record of an experiment in a series of pictures and
captions.
●
●
Snapshot
Takes a snapshot of a SPARKlab page.
●
●
Help
Shows a user’s guide.
●
●
Legend
Shows observed data in a time sequence, identifying each run
by a different color.
●
●
Linear Graph tools
Opens the tool palette.
●
●
Select
Selects a point or range in a graph.
●
●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a graph such as
minimum, maximum, mean, standard deviation, count,
and area.
●
●
Curve fits Applies a linear, quadratic, power, inverse, inverse
square, or sine fit to a run.
●
●
Scale to fit Adjusts the scale and position of a selected range or
point to fit it on the screen.
●
●
Prediction Draws a prediction tracing a continuous curve on the
graph, or touching several points to connect them into
a series.
●
●
Coordinates Shows an annotation with x- and y-values of a
selected point.
●
●
Slope Displays the slope at a selected point.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 12
Windows Android
Lock Adjusts the axes to start from zero origin in a multiple y- axes graph.
●
●
Properties Allows users to configure the measurement units of each axis.
●
●
Digits tools
Opens the tool palette.
●
●
Show statistics Provides statistics functions to show in a graph such as
minimum, maximum, mean, standard deviation and
count.
●
●
Properties
Allows users to configure the measurement units.
●
●
Table tools
Opens the tool palette.
●
●
Select
Selects a cell, row, or column.
●
●
Enter text
Adds text. ● ●
New column
Adds a new column to the left of the selected one. ● ●
Remove column
Deletes the selected column. ● ●
Show statistics
Provides statistics functions to show in a graph such as minimum, maximum, mean, standard deviation and count.
●
●
Properties
Allows users to configure the measurement units of each column.
●
●
Meter tools
Opens the tool palette.
●
●
Show statistics
Provides statistics functions to show in a graph such as minimum, maximum, and mean.
●
●
Scale to fit Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Properties
Allows users to configure the measurement units and sweep range.
●
●
Bar Graph tools
Opens the tool palette.
●
●
Add a bar Adds a new bar.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 13
Windows Android
Scale to fit Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Annotate
Adds text. ● ●
Show statistics Provides statistics functions to show in a graph such as
minimum, maximum, mean, and standard deviation.
●
●
Show value Displays data labels outside the end of data points. ● ●
Add a new run Adds a new run.
● ●
Properties Allows users to configure the measurement units of
each axis.
●
●
Camera tools
Opens the tool palette.
●
●
Preview Shows a real-time camera image.
●
●
Capture
Captures a live image from the camera. ● ●
Zoom in
Adjusts the scale and position of an image. ● ●
Zoom out
Adjusts the scale and position of an image. ● ●
Scale to fit
Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Measurements
Measures the distance between two points. ● ●
Eraser
Allows users to erase a measurement. ● ●
Measurement
Allows users to place a measurement on an image.
●
●
Color
Allows users to change the measurement color.
● ●
Drawings
Adds a drawing on an image. ● ●
Eraser
Allows users to erase a drawing. ● ●
Draw
Allows users to draw on an image. ● ●
Color
Allows users to change the drawing color. ● ●
Annotate
Adds text. ● ●
ikES – inspiring knowledge Education Software – SPARKvue® 14
Windows Android
Eraser
Allows users to erase an annotation. ● ●
Color
Allows users to change the annotation color. ● ●
Properties
Allows users to configure the camera source. ● ●
Start
Starts data recording.
●
●
Time
Displays data recording time.
●
●
Sampling mode
Shows the sampling mode: Manual or Periodic. In periodic
mode also displays sample rate and sample rate unit.
●
●
Sampling options
Shows options to configure sampling mode and set the
automatic stop conditions.
●
●
Experiment tools
Contains options to manage runs, configure their properties,
and add calculations. Also shows sensor configuration and
calibration options.
●
●
Manage data
Manages runs and images. ● ●
Calibrate sensor
Allows users to calibrate the onboard sensors or the external ones connected to system.
●
●
Configure sensor
Edits sensor properties such as zero origin. ● ●
Calculated data
Opens a calculator to create expressions using data measurements. Results can be displayed in any data display.
●
●
Data properties
Allows users to set the units of each measurement, define number formats, and display minimum / maximum values, among others.
●
●
Measurement map
Allows users to modify the measurements assigned to the display.
●
●
Table of contents
Allows users to change between different displays to monitor
data.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 15
1. Home
2. New page
3. Delete page
4. Device tools
5. Sharing
6. Journal
7. Snapshot
8. Help
9. Legend
10. Graph tools
11. Start
12. Sampling options
13. Experiment tools
14. Table of contents
1
21
3 4
5 7
6 8
9
10
11 12
13
14
ikES – inspiring knowledge Education Software – SPARKvue® 16
3.2 Show a SPARKlab
1. Connect to an external sensor if required. On the Home screen select a
Measurement.
2. Press Show.
3.3 Calibrate a sensor
1. On the SPARKlab page press Experiment tools.
2. Press Calibrate sensor.
3. Press OK.
4. Select a Sensor.
5. Select a Measurement.
6. Select the Calibration Type.
a. 2 point (Adjust Slope and Offset).
b. 1 point (Adjust Offset only).
c. 1 point (Adjust Slope only).
7. Select the Calibration Type.
8. In the Standard Value box, enter the known value.
Figure 2
Showing SPARKlab in SPARKvue®.
1
2
2
ikES – inspiring knowledge Education Software – SPARKvue® 17
9. Press Read from Sensor to transfer the value measured by the sensor to the
Sensor Value box.
10. For 2 point calibration the values for Calibration point 2 are required.
11. Press OK.
1
2
3
ikES – inspiring knowledge Education Software – SPARKvue® 18
4
7
6
5
8
9
10
11
Figure 3
Calibration of sensor in SPARKvue®. Sensor calibration is an optional step that can help make measurements more accurate.
ikES – inspiring knowledge Education Software – SPARKvue® 19
3.4 Tare a sensor
1. On the SPARKlab page press Experiment tools.
2. Press Configure sensor.
3. Press OK.
4. Press Edit sensor properties.
5. Select a sensor.
6. Press Zero sensor now.
7. Press OK.
1
2
3
ikES – inspiring knowledge Education Software – SPARKvue® 20
6
7
Figure 4
Zero adjustment of sensor in SPARKvue®. The tare function sets sensor value to zero. To set the sensor value to zero automatically on every start, leave the Tare Sensor function on.
4
5
ikES – inspiring knowledge Education Software – SPARKvue® 21
3.5 Set sampling mode
1. On the SPARKlab page press Sampling options.
2. Choose a sampling mode:
a. Periodic sampling mode is the default mode, also known as “continuous”
mode. If you choose the Periodic sampling mode, follow the steps 3 to 5;
b. In Manual sampling mode, a single value from each measurement is
recorded each time you manually trigger SPARKvue®®. A series of values is
recorded in a data set. If you choose this mode, jump to step 5.
3. Select a value for Sample rate.
4. Choose the Sample Rate unit.
5. Press OK.
1
ikES – inspiring knowledge Education Software – SPARKvue® 22
3.6 Set an automatic stop condition
This feature can only be set up when Periodic sampling mode is used.
1. On the SPARKlab page press Sampling options.
2. In Automatic Stop condition press No Condition.
3. Choose Stop after duration.
4. Set a Value.
5. Select Units.
6. Press OK.
2
3
4
5
Figure 5
Setting of sampling mode in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 23
1
2
3
ikES – inspiring knowledge Education Software – SPARKvue® 24
3.7 Start recording a run of periodically sampled data
1. On the SPARKlab page press Start.
2. To stop data recording press Stop condition.
Repeat these steps to record another run.
Figure 6
Setting of automatic stop condition in periodic sampling mode in SPARKvue®.
44
5
6
1
ikES – inspiring knowledge Education Software – SPARKvue® 25
3.8 Start recording a set of manually sampled data
1. On the SPARKlab page press Table of contents to change to Table display.
2. Press Start. SPARKvue®® creates a new data set.
3. To record a data point, press Keep. SPARKvue® records a single value from each
measurement.
4. Repeat the previous step to record all the values of the data set. When the entire
set has been recorded, press Stop.
2 Figure 7
Recording of periodically sampled data run in SPARKvue®.
1 2
ikES – inspiring knowledge Education Software – SPARKvue® 26
3.9 Change data display in SPARKlab page
1. On the SPARKlab page press Table of contents.
Figure 8
Recording of manually sampled data run in SPARKvue®.
3 4
1
ikES – inspiring knowledge Education Software – SPARKvue® 27
ikES – inspiring knowledge Education Software – SPARKvue® 28
3.10 Hide / show runs in data display
1. On the SPARKlab page press Legend.
2. Check the boxes to show / hide a specific run.
Figure 9
Changing of data display on SPARKvue® Graph, (2) Digits, (3) Table, (4) Meter.
1
2
Figure 10
Selection of runs for data display in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 29
3.11 Delete a run
1. On the SPARKlab page press Experiment tools.
2. Press Manage Data.
3. Press Manage Runs.
4. Choose an option:
a. Delete Last Run.
b. Delete All Runs.
c. Delete Run. Select the specific run you want to delete.
5. Press OK.
1
ikES – inspiring knowledge Education Software – SPARKvue® 30
2
1
3
ikES – inspiring knowledge Education Software – SPARKvue® 31
4
5
Figure 11
Managing runs in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 32
3.12 Add a calculation
1. On the SPARKlab page press Experiment tools.
2. Press Calculated data.
3. Press Insert.
4. To insert a measurement into an expression press Measurements.
5. Select a Measurement.
6. To exit the calculator screen press Done.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 33
3
4
5
ikES – inspiring knowledge Education Software – SPARKvue® 34
3.13 Display a calculation
1. On the SPARKlab page press Graph tools.
2. Press Properties.
3. Choose the axis where you want to display the calculation. Press Measurement.
4. Press User-entered.
5. In Calculated data press Create / Edit calculation.
6
Figure 12
Addition of data calculation in SPARKvue®. The calculator screen allows a user to create an expression using collected data; it contains trigonometry, statistics, math, and special functions such as integral, derivative, avgfilter, among others.
1 2
ikES – inspiring knowledge Education Software – SPARKvue® 35
3.14 Select data statistics
1. On the SPARKlab page press Graph tools.
2. Press Graph statistics.
3. Select graph statistics.
4. Press OK.
3
4
5
Figure 13
Display of data calculation in SPARKvue®.
1 2
ikES – inspiring knowledge Education Software – SPARKvue® 36
3.15 Apply a curve fit
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Curve fit.
4. Select the desired curve fit:
a. Linear fit.
b. Quadratic fit.
c. Power fit.
d. Inverse fit.
e. Inverse Square fit.
f. Sine fit.
5. Press OK.
3
4
Figure 14
Displaying of data statistics in SPARKvue®. In any display data statistics can be shown, including minimum value, maximum value, mean value, standard deviation, and count (number of points). In a graph, the area statistic is also available.
ikES – inspiring knowledge Education Software – SPARKvue® 37
Figure 15
Applying of curve fit in SPARKvue® Curve fitting is the process of constructing a curve, nor mathematical function, which has the best fit to a series of data points, possibly subject to constraints. Curve fitting can involve either interpolation, where an exact fit to the data is required, or smoothing, in which a “smooth” function that approximately fits the data is constructed.
1
2 3
4
5
ikES – inspiring knowledge Education Software – SPARKvue® 38
3.16 Find the x- and y- values of a point
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Select.
4. Tap a point on the graph.
3.17 Find the x- and y- difference between two points
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Select.
4. Tap and drag to select data points.
5. Press Done.
6. Press Coordinates.
1 4
3 2
Figure 16
Finding of x- and y- values of a point in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 39
1 4
5
2 3
6
Figure 17
Finding of x- and y- difference between two points in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 40
3.18 Find the slope on a data point
1. On the SPARKlab page, press Legend and select a specific run.
2. Press Graph tools.
3. Press Slope.
4. Press the arrows of the Point selector to move the slope tool to nearby points.
3.19 Use the built-in camera as an exploration tool
1. On the Home screen, select Camera and press Image.
2. Press Show.
3. Press Camera tools.
4. Press Preview.
5. To capture an image, press Capture.
1 4
3 2
Figure 18
Finding of the slope on a data point in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 41
1
2
3
4
5
Figure 19
Use of the built-in camera as an exploration tool in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 42
3.20 Zoom in / zoom out of a camera image
1. Press Camera tools.
2. Press Zoom in or Zoom out.
3. To show the entire image, press Scale to fit.
3.21 Calibrate the camera image measurements
1. Press Camera tools.
2. Press Measurements.
3. Tap the first point on the image at one end of the known-length object. Drag the box
to the second point at the other end of the known-length object.
4. Tap the box at one end of the measurement arrow.
5. In the Image Measurement Properties screen enter the Known length.
6. Select the number of Digits.
7. Type the Units.
8. Press OK.
Figure 20
Zoom in / zoom out a camera image in SPARKvue®.
1 2 3
ikES – inspiring knowledge Education Software – SPARKvue® 43
1 2 3
4
5
6
7
8
Figure 21
Calibration of image measurements in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 44
3.22 Measure distance on a camera image
1. Press Camera tools.
2. Press Measurements.
3. Choose a Color in the palette.
4. Tap the first point on the image.
5. Drag the box to the second point.
3.23 Add annotations on a camera image
If there is more than one image, first select the image that the annotation will be
attached to.
1. Press Camera tools.
2. Press Annotate.
3. Choose a Color in the palette.
4. Tap the area where you want to add the annotation.
5. Type the text in the Add Note box.
6. Press OK.
1 2
5
4
3
Figure 22
Distance measured on an image in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 45
1 2
3
4
6
7
Figure 23
Addition of annotations on a camera image in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 46
3.24 Manage camera images
1. On the SPARKlab page, press Experiment tools.
2. Press Manage Data.
3. Press Manage Images.
4. Choose an option:
a. Delete all images.
b. Delete Image.
c. Rename image.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 47
3
4
Figure 24
Managing camera images in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 48
3.25 Take a snapshot
1. On the SPARKlab page, press Snapshot.
2. In the Snapshot quick view choose an action:
a. Open the journal.
b. Delete the snapshot.
3.26 Start a journal
To start working a journal, first you need to take some snapshots.
1. On the SPARKlab page, press Journal.
2. Select a thumbnail.
3. To add or edit a caption, tap the Name box and enter text.
4. To add or edit the notes, tape the Notes box and enter text.
5. To rearrange journal entries, press Move Journal Entry Up / Move Journal
Entry Down.
6. To delete a journal entry, press Delete.
7. To close the journal press OK.
1
2.a
2.b
Figure 25
Taking of snapshots in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 49
Figure 26
Recording of a journal in SPARKvue®. The journal keeps a record of your work in a series of pictures and captions as your science investigation progresses.
1
2 6
5
3
4
7
ikES – inspiring knowledge Education Software – SPARKvue® 50
3.27 Print a journal
1. On the SPARKlab page, press Sharing.
2. Press Print journal.
1
2
Figure 27
Printing of a journal in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 51
3.28 Export a journal
1. On the SPARKlab page, press Sharing.
2. Press Export journal.
3. Enter a File name.
4. Press Save.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 52
3.29 Save a SPARKlab
1. On the SPARKlab page, press Sharing.
2. Press Save file as.
3. Enter a File name.
4. Press Save.
perform any kind of measurement when a reference value is available (ie. the moon’s
diameter). Web cameras are able to capture extremely close shots, so even
3
4
Figure 28
Exporting of the journal in SPARKvue®. This function saves the journal in a format that can be viewed in a web browser.
1
ikES – inspiring knowledge Education Software – SPARKvue® 53
2
3
4
Figure 29
Saving a SPARKlab in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 54
3.30 Export a SPARKlab
1. On the SPARKlab page, press Sharing.
2. Press Export data.
3. Enter a File name.
4. Press Save.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 55
3
4
Figure 30
Exporting a SPARKlab in SPARKvue®. This function saves a SPARKlab as a tab-delimited text file.
ikES – inspiring knowledge Education Software – SPARKvue® 56
4. Open a SPARKlab
The Open function allows users to open an embedded or previously saved SPARKlab.
4.1 Open an experiment
1. On the Home screen, press Experiments.
2. Select an experiment.
3. Press Open.
1
ikES – inspiring knowledge Education Software – SPARKvue® 57
4.2 Open saved work
1. On the Home screen, press Saved work.
2. Select a file.
3. Press Open.
2
3
Figure 31
Opening of an embedded SPARKlab in SPARKvue®.
1
ikES – inspiring knowledge Education Software – SPARKvue® 58
2
3
Figure 32
Opening of a saved SPARKlab in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 59
5. Build a SPARKlab
The Build function allows users to create their own SPARKlab pages; adding eements
such as displays for each measurement, textboxes, and images, among others.
5.1 Main screen and elements
Windows Android
Home
Returns to home page.
●
●
New page
Adds a new page within a SPARKlab.
●
●
Delete Page
Deletes the selected page. This action cannot be undone.
●
●
Device tools
Shows information about software version as well as different configuration options such as SPARKvue® language, available sensor interfaces, and file management.
●
●
Connect Sensors via Bluetooth
Allows users to connect multiple external interfaces
via Bluetooth.
●
●
Manage files
Contains commands to manage files, such as copy,
move, and delete.
●
Languages
Allows users to select a language. ● ●
About SPARKvue®
Shows information about software license, version,
and support contact.
●
●
Sharing
Shows different options to save or export data collection as a
SPARKlab page, journal or image.
●
●
Save file
Saves a SPARKlab. ● ●
Save File as
Saves a SPARKlab allowing users to select name and
location.
●
●
Online Storage services
Saves a SPARKlab in an online service. ● ●
Export data
Saves a SPARKlab as a tab-delimited text file. ● ●
Export Journal
Saves the journal in a format that can be viewed in a web browser.
●
●
Print Journal
Allows users to print out the journal. ●
Export images
Saves a snapshot as an image. ● ●
ikES – inspiring knowledge Education Software – SPARKvue® 60
Lock Adjusts the axes to start from zero origin in a multiple y- axes graph.
●
●
Properties Allows users to configure the measurement units of each axis.
●
●
Windows Android
Journal
Keeps a record of an experiment in a series of pictures and
captions.
●
●
Snapshot
Takes a snapshot of a SPARKlab page.
●
●
Help
Shows a user’s guide.
●
●
Select a background image
Places an image as a SPARKlab page background.
●
●
Templates
Shows the available page layouts.
●
●
Linear Graph
Adds a linear graph display.
●
●
Select
Selects a point or range in a graph.
●
●
Annotate
Adds text. ● ●
Show statistics
Provides statistics functions to show in a
graph such as minimum, maximum, mean,
standard deviation, count, and area.
●
●
Curve fits Applies a linear, quadratic, power, inverse,
inverse square, or sine fit to a run.
●
●
Scale to fit Adjusts the scale and position of a selected
range or point to fit it on the screen.
●
●
Prediction Draws a prediction tracing a continuous curve
on the graph, or touching several points
to connect them into a series.
●
●
Coordinates Shows an annotation with x- and y-values of a
selected point.
●
●
Slope Displays the slope at a selected point.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 61
Digits
Adds a digits display.
●
●
Show statistics Provides statistics functions to show in a graph
such as minimum, maximum, mean, standard
deviation and count.
●
●
Properties
Allows users to configure the measurement units.
●
●
Table
Adds a table display.
●
●
Select
Selects a cell, row, or column.
●
●
Enter text
Adds text. ● ●
New column
Adds a new column to the left of the selected one.
● ●
Remove column
Deletes the selected column. ● ●
Show statistics
Provides statistics functions to show in a graph such as minimum, maximum, mean, standard deviation and count.
●
●
Properties
Allows users to configure the measurement units of each column.
●
●
Bar Graph
Adds a bar graph display.
●
●
Add a bar Adds a new bar.
●
●
Scale to fit Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Annotate
Adds text.
●
●
Show statistics
Provides statistics functions to show in a graph such as minimum, maximum, mean, and standard deviation.
●
●
Show value Displays data labels outside the end of data points.
●
●
Add a new run
Adds a new run.
●
●
Properties Allows users to configure the measurement units of each axis.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 62
Meter
Adds a meter display.
●
●
Show statistics
Provides statistics functions to show in a graph such as minimum, maximum, and mean.
●
●
Scale to fit Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Properties
Allows users to configure the measurement units and sweep range.
●
●
Camera
Adds a camera display.
●
●
Preview Shows a real-time camera image.
●
●
Capture
Captures a live image from the camera. ● ●
Zoom in
Adjusts the scale and position of an image. ● ●
Zoom out
Adjusts the scale and position of an image. ● ●
Scale to fit
Adjusts the scale and position of a selected range or point to fit it on the screen.
●
●
Measurements
Measures the distance between two points. ● ●
Eraser
Allows users to erase a measurement. ● ●
Measurement
Allows users to place a measurement on an image.
●
●
Color
Allows users to change the measurement color.
● ●
Drawings
Adds a drawing on an image. ● ●
Eraser
Allows users to erase a drawing. ● ●
Draw
Allows users to draw on an image. ● ●
Color
Allows users to change the drawing color. ● ●
Annotate
Adds text. ● ●
Eraser
Allows users to erase an annotation. ● ●
Color
Allows users to change the annotation color.
● ●
Properties
Allows users to configure the camera source. ● ●
ikES – inspiring knowledge Education Software – SPARKvue® 63
Media
Adds a media element. ● ●
Open a file
Places a media file. ● ●
Delete
Deletes an object. ● ●
Lock
Keeps an object from being modified. ● ●
Text
Adds a text box. ● ●
Assessment
Allows users to design assessment questions and answers.
● ●
Edit
Edits assessment properties. ● ●
Delete
Allows users to change the annotation color.
● ●
Lock
Keeps an object from being modified. ● ●
Start
Starts data recording.
●
●
Time
Displays data recording time.
●
● Sampling mode
Shows the sampling mode: Manual or Periodic. In periodic
mode also displays sample rate and sample rate unit.
●
●
Sampling options
Shows options to configure sampling mode and set the
automatic stop conditions.
●
●
Experiment tools
Contains options to manage runs, configure their properties,
and add calculations. Also shows sensor configuration and
calibration options.
●
●
Manage data
Manages runs and images. ● ●
Calibrate sensor
Allows users to calibrate the onboard sensors or the external ones connected to system.
●
●
Configure sensor
Edits sensor properties such as zero origin. ● ●
Calculated data
Opens a calculator to create expressions using data measurements. Results can be displayed in any data display.
●
●
Data properties
Allows users to set the units of each measurement, define number formats, and display minimum / maximum values, among others.
●
●
Measurement map
Allows users to modify the measurements assigned to the display.
●
●
ikES – inspiring knowledge Education Software – SPARKvue® 64
Table of contents
Allows users to change between different displays to monitor
data.
●
●
5.2 Start a new SPARKlab page
From the home screen.
1. Press Build.
From within an existing SPARKlab.
1. Press New page.
Figure 33
Creation of a new SPARKlab page from the SPARKvue® home screen.
11
ikES – inspiring knowledge Education Software – SPARKvue® 65
5.3 Delete a SPARKlab page
1. Press Delete Page.
11
Figure 34
Creation of a new SPARKlab page from within an existing SPARKlab in SPARKvue®.
11
Figure 35
Removal of a SPARKlab page in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 66
5.4 Add a background image
1. Press Select a background image.
2. Choose an image.
3. Press Open.
11
2
31
Figure 36
Addition of a background image for SPARKlab page in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 67
5.5 Add elements to a SPARKlab page
1. Select a Template.
2. Select a display for each placeholder.
1
2
Figure 37
Addition of elements in a SPARKlab page in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 68
5.6 Create a new line graph display
1. After selecting a SPARKlab page template, press Line Graph in one placeholder.
2. Press Select Measurement.
3. Select Measurement and Units for horizontal axis (x).
4. Select Measurement and Units for vertical axis (y).
5. Press OK.
6. To configure more options press Graph tools.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 69
5.7 Create a new bar graph display
1. After selecting a SPARKlab page template, press Bar Graph in one placeholder.
2. To customize axes labels and units, press X-Axis Variable.
3. Press Measurement.
4. Press User-Entered.
5. Press Create Data Set.
6. Enter Measurement Name.
7. Press OK.
8. Configure Measurement and Units for Vertical Axis (y).
9. Press OK.
10. To configure more options press Graph tools.
Figure 38
Creation of a new line graph display in SPARKvue®.
3
4
5
6
ikES – inspiring knowledge Education Software – SPARKvue® 70
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 71
3
4
5
6
7
ikES – inspiring knowledge Education Software – SPARKvue® 72
5.8 Add bars and bar names in bar graphs
1. To add a bar manually, press the bar with muted color.
2. Enter Bar Title and Value.
3. Press OK.
4. A new bar is automatically added. To name it, repeat the steps 3 and 4.
Figure 39
Creation of a new bar graph display in SPARKvue®.
8
10
9
1
ikES – inspiring knowledge Education Software – SPARKvue® 73
2
3
4
Figure 40
Addition of bars and bar names in bar graph display in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 74
5.9 Create a new table display
5. After selecting a SPARKlab page template, press Table in one placeholder.
6. Press Select Measurement.
1. Configure the number of Columns.
2. Select Measurement.
3. Select Units.
4. Press OK.
5. To configure more options press Table tools.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 75
5.10 Create a new digits display
1. After selecting a SPARKlab page template, press Digits in one placeholder.
2. Press Select Measurement.
3. Select Measurement.
4. Select Units.
5. Press OK.
6. To configure more options press Digits tools.
Figure 41
Creation of a new table display in SPARKvue®.
3
4
5
7
6
1
ikES – inspiring knowledge Education Software – SPARKvue® 76
Figure 42
Creation of a new digits display in SPARKvue®.
2
3
4
6
5
ikES – inspiring knowledge Education Software – SPARKvue® 77
5.11 Create a new meter display
1. After selecting a SPARKlab page template, press Meter in one placeholder.
2. Press Select Measurement.
3. Select Measurement.
4. Select Units.
5. Select Sweep Range.
6. Configure Meter Scale.
7. Press OK.
8. To configure more options press Meter tools.
singlecelled organisms can be observed as well.
1
ikES – inspiring knowledge Education Software – SPARKvue® 78
Figure 43
Creation of a new meter display in SPARKvue®.
2
3
4
5
6
8
7
ikES – inspiring knowledge Education Software – SPARKvue® 79
5.12 Add a text box
1. After selecting a SPARKlab page template, press Text in one placeholder.
2. Enter the text.
1
2
Figure 44
Creation of a new text box in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 80
5.13 Add a media file
1. After selecting a SPARKlab page template, press Media in one placeholder.
2. Press Select a Media File.
3. Select a file.
4. Press Open.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 81
5.14 Remove or replace a media file
1. Press Media tools.
2. To replace a media file press Open.
3. To remove a media file press Delete.
3
4
Figure 45
Addition of a media file in SPARKvue®.
1
2 3
Figure 46
Removal or replacement of a media file in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 82
5.15 Create an assessment
1. After selecting a SPARKlab page template, press Assessment in one placeholder.
2. Press Add an Assessment.
3. Select a Question Type.
4. Based on Question Type complete Question contents.
5. Press Correct Answer.
6. Mark the Correct Answer.
7. Press Save.
1
2
ikES – inspiring knowledge Education Software – SPARKvue® 83
3
4
5
ikES – inspiring knowledge Education Software – SPARKvue® 84
5.16 Create a manual data set
1. After selecting a display for one placeholder in the SPARKlab page template, press
Select Measurement.
2. Press Measurement.
3. Press User-Entered.
4. Press Create Data Set.
5. Enter Measurement Name.
6. Enter Unit Name.
7. On Data Properties press Edit.
8. Configure Number Format.
9. Configure Default display Properties.
10. Configure User-Entered Data Configuration.
11. Press OK.
6
7
Figure 47
Creation of an assessment in SPARKvue®.
ikES – inspiring knowledge Education Software – SPARKvue® 85
1 2
3
4
5
6
7
ikES – inspiring knowledge Education Software – SPARKvue® 86
Figure 47
Creation of a manual data set in SPARKvue®.
8
9
10
11