spacial s3d, sf and sm variable speed drive flush...
TRANSCRIPT
438
PB
5029
41-7
1P
B50
2942
-39
PB
5029
43-7
3P
B50
2944
-42
PB
5029
38-2
7
PB
5029
40-9
PB
5029
74-4
2
PB
5029
39-1
2
PB
5029
37-2
7
PB
5029
73-4
3Spacial S3D, SF and SM Variable speed drive
flush-mounting kits Introduction
The variable speed drive flush-mounting kits have been designed to isolate the power part, which is an important source of heat. They are mounted in the Spacial range of steel enclosures (floor-standing and wall-mounting enclosures) and have been approved for Altivar Process variable speed drives in the ATV630 and ATV930 ranges (power range: 0.75 to 45 kW at 200/240 V, 0.75 to 90 kW at 380/480 V).
The kits are available in five sizes and offer two methods of mounting variable speed drives: - slide-rail mounting for sizes 1, 2
and 3- bracket mounting for sizes 4 and 5.
The kits can be installed: - at the back of the enclosure.
This installation provides full thermal insulation
- inside the enclosure on a mounting plate. This installation may require the addition of a thermal control.
TightnessIP55 to IEC 60529 with polyurethane seal provided.
Ease of installationSet of slide-rails allowing the variable speed drive to be mounted quickly and efficiently.
StrengthThe rigidity of the kit allows it to be installed on Spacial S3D, SF and SM enclosures.
Maintenance of the variable speed drive fan (kit sizes 4 and 5)Easy front-panel maintenance for fan servicing.
Earth continuityEarth continuity is ensured by tightening the M6 nuts associated with pin washers.
ServicesPossibility of cutouts (enclosure and frame) by Schneider Electric: no risk of corrosion and cuts (cutout made before painting).
Configured offer
New
439
PB
5029
36-3
2
PB
5029
35-2
5
Spacial S3D, SF and SM Variable speed drive flush-mounting kits Characteristics
Characteristics Mounting kitsVariable speed drive installation kits allowing the hot part to be isolated.
Material Steel Finish b Painted with epoxy-polyester resin
b Salt spray resistance: 336 hColour RAL 7035 greyIngress protection rating IP55Mechanical protection rating -Certifications IEC 62208, UL 508A under developmentSupply Sizes 1, 2 and 3:
b Painted steel plate with cutout fitted with two slide-rails + adhesive seal + 7 to 9 M6 studs for kit mounting b Protection seal profile supplied for frame cutout b Enclosure drilling template
Sizes 4 and 5: b Painted steel plates with cutout fitted with painted mounting brackets + screws and nuts for fixing the brackets and the kit b Protection seal supplied for frame cutout b Enclosure drilling template b Fan support for ease of maintenance b Protective cover
Dimensions (mm) Sizes Compatibilities ReferencesH L P Enclosures Variable speed drives Kits
ATV630 ATV930200/240 V 380/480 V 200/240 V 380/480 V
360 235 22 1 S3D, SF, SM ATV630U07M3ATV630U15M3ATV630U22M3ATV630U30M3ATV630U40M3
ATV630U07N4ATV630U15N4ATV630U22N4ATV630U30N4ATV630U40N4ATV630U55N4
ATV930U07M3ATV930U15M3ATV930U22M3ATV930U30M3ATV930U40M3
ATV930U07N4ATV930U15N4ATV930U22N4ATV930U30N4ATV930U40N4ATV930U55N4
NSYPTDS1
420 265 22 2 S3D, SF, SM ATV630U55M3 ATV630U75N4ATV630D11N4
ATV930U55M3 ATV930U75N4ATV930D11N4
NSYPTDS2
555 295 22 3 S3D, SF, SM ATV630U75M3ATV630D11M3
ATV630D15N4ATV630D18N4ATV630D22N4
ATV930U75M3ATV930D11M3
ATV930D15N4ATV930D18N4ATV930D22N4
NSYPTDS3
800 385 151,5 4 SF, SM ATV630D15M3ATV630D18M3ATV630D22M3
ATV630D30N4ATV630D37N4ATV630D45N4
ATV930D15M3ATV930D18M3ATV930D22M3
ATV930D30N4ATV930D37N4ATV930D45N4
NSYPTDS4
975 427 205,5 5 SF, SM ATV630D30M3ATV630D37M3ATV630D45M3
ATV630D55N4ATV630D75N4 ATV630D90N4
ATV930D30M3ATV930D37M3ATV930D45M3
ATV930D55N4ATV930D75N4ATV930D90N4
NSYPTDS5
Sizes 1, 2 and 3. Sizes 4 and 5.
New
440
265
420
22
RL
DB
3008
75
NSYPTDS2235
360
22
RL
DB
3008
74
NSYPTDS1
295
555
22
RL
DB
3008
76
NSYPTDS3
385
800
150.5
DB
3008
77
NSYPTDS4
975
435 206
DB
3008
78
NSYPTDS5
Spacial S3D, SF and SM Variable speed drive flush-mounting kits Dimensions
New
441
PB
5029
45-5
7
Spacial S3D, SF and SM Variable speed drive flush-mounting kits Mounting accessory
Characteristics Wall-mounting enclosure fixing lugMaximum load 105 kgMaterial Painted steel RAL 7035Supply Set of 4 lugs and brackets + fastenersWall-mounting enclosure Dimensions (mm)
References
Height Width Variable speed drive flush-mounting kits
Fixing lug
≥ 400 ≥ 300 NSYPTDS1 NSYAEFPFPTD≥ 500 ≥ 300 NSYPTDS2≥ 600 ≥ 400 NSYPTDS3
DB
3008
80
DB
3008
79
New