sp1000 ~sp5000 initial-p/-m sp initial series

MODEL SP1000 Initial-P SP2000 Initial-P SP3000 Initial-P SP5000 Initial-P SP1000 Initial-M SP2000 Initial-M SP3000 Initial-M SP3000 Initial-M II SP5000 Initial-MRated Power 1000VA/1000W 2000VA/2000W 3000VA/3000W 5000VA/5000W 1000VA/1000W 2000VA/2000W 3000VA/3000W 3000VA/3000W 5000VA/5000WINPUTVoltage 230 VAC

Selectable Voltage Range170-280 VAC (For Personal Computers)

90-280 VAC (For Home Appliances)Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%Surge Power 2000VA 4000VA 6000VA 10000VA 2000VA 4000VA 4000VA 6000VA 10000VA

93%

Transfer Time10 ms (For Personal Computers)

20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC 48 VDCFloating Charge Voltage 13.5 VDC 27 VDC 54 VDC 13.5 VDC 27 VDC 54 VDCOvercharge Protection 16 VDC 33 VDC 63 VDC 16 VDC 33 VDC 63 VDCSOLAR CHARGER & AC CHARGERMaximum PV Array Open Circuit Voltage 50VDC 80VDC 105VDC 102VDC 100VDC 145VDCPV Maximum Input power 600W 1200W 1200W 2400W 500W 1000W 1000W 1000W 3000WOperation Voltage Range 18~20VDC 30~32VDC 60~72VDC N/APV Array MPPT Voltage Range N/A N/A N/A 15~80VDC 30~80VDC 30~80VDC 60~115VDCMaximum Solar Charging Current 50A 40A 40A 60AMaximum AC Charging Current 20A 25A 60A 20A 25A 60AMaximum Charging Current 50A 70A 110A 60A 60A 120APHYSICALDimension (D×W×H) 88×225×315mm 100×285×334mm 100×300×440mm 88×225×315mm 100×285×334mm 100×300×440mmNet Weight 4.4kgs 5kgs 6.5kgs 9kgs 4.4kgs 5kgs 6.3kgs 9.5kgs 9.7kgsOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity (Non-condensing)Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C

SP1000 ~SP5000 Initial-P/-M

SP Initial SeriesSP Initial SeriesKeep high value with economy, SP Initial Series allow you easily to use solar energy.

User friendly, high-efficiency and reliable.

Enjoy the green life.

Features

• Pure sine wave inverter with PF1

• Selectable high power charging current

• Compatible to mains voltage or generator power

• Smart battery charger design for optimized battery performance

• Built-in solar charge controller

• Overload and short circuit protection


• Cold start function

• USB communication port

Specifications are subject to change without notice.

Specifications

SP1000~SP5000 Initial-PSP3000~SP5000 Initial-M SP1000~SP2000 Initial-M

I N V E R T E R P W E RI N V E R T E R P W E R

in fo@opt i -so lar.comwww.opt i -so lar.com Use recycled paper for a green future.

©2019 OPTI International Corporation. Names and trademarks herein are the property of their respective companies.

OPTI-Solar USA:Tel: +1-909-869-5700Fax: [email protected]

OPTI-Solar Middle East:Tel: +9714-8819-838Fax: [email protected]

OPTI-Solar Asia:Tel: +886-2-2246-7272Fax: [email protected]

OPTI-Solar Europe B.V.:Tel: +31-40-2628057Fax: [email protected]

SP Efecto/Brilliant SeriesSP Efecto/Brilliant Series

Specifications

Features• Pure sine wave inverter• Built-in solar charger: PWM/MPPT• Selectable input voltage range for home appliances

and personal computers• Selectable charging current based on applications• Configurable AC/Solar input priority• Compatible to mains voltage or generator power• Auto restart as AC recovers• Overload and short circuit protection• Smart battery charger design for optimized battery

performance• Cold start function• Parallel application (optional)• Operation without battery (Brilliant Ultra only)

SP Efecto/Brilliant Series provide the integration of friendly PV energy

The PV maximum charging current will reach up to 80A or 120A.

Enjoy more solar energy with a simply solution.

SP5000 Efecto/Brilliant Plus/Brilliant Ultra

Specifications are subject to change without notice.* All SP5000 Efecto/Brilliant Series can be installed in parallel with maximum up to 9 units, and total capacity can reach 45KVA (Transfer time is 30ms in parallel operation)

MODEL SP5000 Efecto SP5000 Brilliant Plus SP5000 Brilliant UltraRated Power 5000VA/5000WINPUTVoltage 230 VACSelectable Voltage Range

170-280 VAC (For Personal Computers)90-280 VAC (For Home Appliances)

Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%

Surge PowerPeak Efficiency

10000VA93% 90%


20 ms (For Home Appliances)Waveform Pure sine wave

Overload Capacity10s for 110%~150% load

5s for ≥150% loadBATTERYBattery Voltage 48 VDCFloating Charge Voltage 54 VDC (maximum 58Vdc)

Low Battery Alarm Voltage 42 VDC

Shutdown Voltage 40 VDCOvercharge Protection 60 VDC (maximum 66 VDC)Reverse Polarity Protection Yes

SOLAR CHARGER & AC CHARGERPV Maximum Input power 2500W 6000W 4500W

Maximum PV Array Open Circuit Voltage 100Vdc 145Vdc 450Vdc

Operation Voltage Range 60~90Vdc N/A

PV Array MPPT Voltage Range N/A 60~115Vdc 120~430Vdc

Maximum Solar Charging Current 50A 120A 80A

Maximum AC Charging Current 60 A 80 A

Maximum Charging Current 110A 180A 80A

PHYSICALDimension (D×W×H) 110 x 300 x 455mm 186 x 295 x 507mm 120 x 295 x 468mmNet Weight 8.5kgs 16kgs 11kgsOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity(Non-condensing)Operating Temperature 0°C - 55°C

Storage Temperature -15°C - 60°C








SP3000 ~ 5000 Handy

SP Handy SeriesSP Handy Series

Operation Diagram:

Mighty Solar Inverter with user-friendly, advanced & energy-exchange functions

Operation without battery & High PV input voltage

Installers are smiling !!

The Anti-Dust-Filter design can realistically raise the life-span.

Features• Pure sine wave inverter with PF1• High PV input range• Feasible for without-battery operation• Selectable high power charging current• Compatible to mains voltage or generator power• Smart battery charger design for optimized battery performance• Built-in solar charge controller• Overload and short circuit protection• Smart battery charger design for optimized battery performance• Cold start function• The Anti-Dust-Filter design can realistically raise the life-span

Specifications

Specifications are subject to change without notices.

MODEL SP 3000Handy SP 5000HandyRated Power 3000VA/3000W 5000VA/5000WINPUTVoltage 230 VAC


90-280 VAC (For Home Appliances)Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%


6000VA 10000VA93%


20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 24 VDC 48 VDCFloating Charge Voltage 27 VDC 54 VDCOvercharge Protection 33 VDC 63 VDCSOLAR CHARGER & AC CHARGERPV Maximum Input power 4000W 5000WMaximum PV Array Open Circuit Voltage 500Vdc

PV Array MPPT Voltage Range 120~450Vdc

Maximum Solar Charging Current 80A

Maximum AC Charging Current 60A

Maximum Charging Current 80A

PHYSICALDimension (D×W×H) 100 x 300 x 440mmNet Weight 9kgs 10kgsOPERATING ENVIRONMENT

Humidity 5% to 95% Relative Humidity (Non-condensing)

Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C








gray

刪劃線

SP3000 Handy Plus ~ 5000 Handy Plus

SP Handy Plus SeriesSP Handy Plus Series


Features• High PV input range• Pure sine wave inverter• Selectable high power charging current• Compatible to mains voltage or generator power• Smart battery charger design for optimized battery

performance• Built-in solar charge controller• Overload and short circuit protection• Smart battery charger design for optimized battery

performance• Cold start function• Bluetooth function• Detachable LCD display

Unique design detachable LCD display with comprehensive information

Easily accessible DATA via Bluetooth interface

User-friendly for the beginners

Specifications

Operation Diagram:

MODEL SP3000 Handy Plus SP5000 Handy PlusRated Power 3000VA/3000W 5000VA/5000WINPUTVoltage 230 VAC


90-280 VAC (For Home Appliances)Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%


6000VA 10000VA93%


20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 24 VDC 48 VDCFloating Charge Voltage 27 VDC 54 VDCOvercharge Protection 33 VDC 63 VDCSOLAR CHARGER & AC CHARGERMaximum PV Array Power 4000W 5000WMaximum PV Array Open Circuit Voltage 500Vdc

PV Array MPPT Voltage Range 120~450Vdc

Maximum Solar Charging Current 80A

Maximum AC Charging Current 60A

Maximum Charging Current 80APHYSICALDimension (D×W×H) 115×300×400mmNet Weight 9kgs 10kgsCommunication Port RS232 / USB / Dry-contact / BluetoothOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity (Non-condensing)Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C




OPTI-Solar USA:Tel: +1-909-869-5700Fax: +1-909-869-5730

OPTI-Solar Europe B.V.:Tel: +31-40-2628057Fax: +31-402546006

OPTI-Solar Middle East:Tel: +9714-8819-838Fax: +9714-8819-938

OPTI-Solar Asia:Tel: +886-2-2246-7272Fax: +886-2-2246-7312

SP6000 ~ 8000 Handy Ultra

Features

• High PV input range

• Feasible for without-battery operation

• Built-in anti-dust kit



• Replaceable fan design for ease of maintenance




• WiFi function

• Detachable LCD display

• Parallel operation up to 6 units

High output capacity perfectly for the inductive loads.

Unique function of easy replaceable Fan effectively extend the life span.

Operation Diagram:

SP Handy Ultra SeriesSP Handy Ultra Series

Solar inverter could simultaneously connect to the city power and solar panels and operate without interference from one another. The inverters are able to operate normally.



MODEL SP6000 Handy Ultra SP8000 Handy UltraRated Power 6000VA/6000W 8000VA/8000WINPUTVoltage 120 VAC 230 VAC

Selectable Voltage Range90-140 VAC (For Personal Computers) 170-280 VAC (For Personal Computers)

80-140 VAC (For Home Appliances) 90-280 VAC (For Home Appliances)Frequency Range 50 Hz/ 60 Hz (Auto sensing) 50 Hz/ 60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 120VAC ± 5% 230VAC ± 5%Surge Power 12000VA 16000VA

93%


20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 48 VDCFloating Charge Voltage 54 VDCOvercharge Protection 66 VDCSOLAR CHARGER & AC CHARGERMaximum PV Array Power 8000W (4000W MPPT×2)Maximum PV Array Open Circuit Voltage 250Vdc 500VdcPV Array MPPT Voltage Range 90~230Vdc 90~430VdcMaximum Solar Charging Current 120A 120AMaximum AC Charging Current 120A 120AMaximum Charging Current 120A 120APHYSICALDimension (D×W×H) 147.5×432.5×553.5mmNet Weight 18.4kgsCommunication Port RS232/USB/Dry-contact/BluetoothOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity(Non-condensing)Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C


Specifications

SP6000 ~ 8000 Handy Ultra

SP Handy Ultra SeriesSP Handy Ultra SeriesParallel Operation

Maximum 6 units in parallel








SP8000 Steel

SP Steel SeriesSP Steel Series


Features

• Pure sine wave inverter with 0 ms transfer time of genuinely online designed

• Built-in solar charger: MPPT

• Advanced SPWM technology, high-speed power MOS

• Configurable: PV/AC priority

• AC Input with effective online double conversion technology

• Green function (Optional)

Specifications

SP Steel is the hybrid solar inverter designed with the structure of pure ON-LINE UPS.

Built-in ISO transformer & multiple circuit breakers.

Enjoy solar energy & protection all the time !!

MODEL SP8000 SteelRated Power 8000WINPUTAC Voltage 165~275 VAC

Frequency Range 40-70 Hz (overclocking: auto transfer to DC power supply)

OUTPUTAC Voltage Regulation (Batt. Mode) 220VAC ± 5%

Output FrequencyPeak Efficiency

50 / 60 Hz ± 1Hz (settable)92%

Transfer Time 0ms Waveform Pure sine wave

Overload Capacity 110% for 255s; 125% for 60s; 150% for 10s

BATTERYBattery Voltage 192 VDCLow Battery Alarm Voltage 192 VDCShutdown Voltage 168 VDCSOLAR CHARGER & AC CHARGERPV Maximum Input Power 11520WMaximum PV Array Open Circuit Voltage 450Vdc

PV Array MPPT Voltage Range 192~400VdcMaximum Solar Charging Current 60AMaximum AC Charging Current 12 AMaximum Charging CurrentMax. Conversion Efficiency

10~60A (Selectable)98%

PHYSICALDimension (D×W×H) 560×265×725 mmPackage Dimension (D×W×H) 662×360×905 mmNet Weight 85 kgsGross Weight 94 kgsOPERATING ENVIRONMENT


Operating Temperature 0°C - 40°C








SP5000 IP


Features

• High PV input range

• Feasible for without-battery operation

• Built-in anti-dust kit



• Replaceable fan design for ease of maintenance




• IP41 design

IP41 unique design, suitable for harsh environmental conditions.

Specifications

Operation Diagram:

SP IP SeriesSP IP Series

MODEL SP5000 IPRated Power 5000VA/5000WINPUTVoltage 230 VAC


90-280 VAC (For Home Appliances)Frequency Range 50 Hz/ 60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%Surge PowerPeak Efficiency

10000VA93%


20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 48 VDCFloating Charge Voltage 54 VDCOvercharge Protection 63 VDCSOLAR CHARGER & AC CHARGERMaximum PV Array Power 4500WMaximum PV Array Open Circuit Voltage 450VdcPV Array MPPT Voltage Range 120~450VdcMaximum Solar Charging Current 80AMaximum AC Charging Current 80AMaximum Charging Current 80APHYSICALDimension (D×W×H) 125×378×516mmNet Weight 16kgsCommunication Port RS232/USB/Dry-contact/BluetoothOPERATING ENVIRONMENT


Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C








SP7000 / SP10000 Revival

SP Revival SeriesSP Revival SeriesWater Pumps installation has been a challenge in areas lacking AC utility power. Thus hindering irrigation and water supply project in remote regions.

Opti inverters supply AC power to any conventional pump directly from Solar Panels.

Zero operating cost and maintenance free operation makes it the best solar option for Irrigation for orchards, gardens and farms.

Features• Built-in MPPT solar controller• Design for three-phase motors• Multiple protections and self Diagnosis• Soft start Function prevent water hammer effect• Comprehensive LCD Display & LED indicators• Remote Monitioring by RS-485 communication interface

Specifications


MODEL SP7000 Revival SP10000 Revival

Rated Power 7500W 11000W

Recommended Pump Capacity 3~9HP 10~14HP

AC OUTPUT

AC Voltage Regulation 3 ×380/400/415/440vac

Efficiency > 97%

Maximum Output Current 15A 22A

Motor Type Three-phase asynchronous motor

Frequency Accuracy ± 0.2%

PV INPUT

Maximum PV Array Power 12000W 17600W

Maximum DC Voltage 800 VDC

Start-up Voltage 250 VDC

MPPT Voltage Range 250 ~ 780 VDC

Number of MPPT Controller 1

Maximum Input Current 14.5 A 22A

PROTECTION

Protection Over-voltage / under-voltage / over-current / surge / over - Temperature /

short circuit protection

PHYSICAL

Dimension (D×W×H) 110×230×330mm

Net Weight 6kg 6.5kg

Ingress Protection Rating IP20

INTERFACE

Communication Port RS232 / RS485

OPERATING ENVIRONMENT

Humidity < 95% Relative Humidity (Non-condensing)

Operating Temperature Full load: - 20°C - 45°C Power derating: 46°C - 60°C








SP4000 Premium ~ SP15000 Premium

SP Premium SeriesSP Premium SeriesTrue Hybrid Solar Inverter with Energy Storage

Features• 4/10/15KW on-grid inverter with energy storage• Pure sine wave output• Microprocessor controlled to guarantee stable charging system• Multiple operations: Grid tie, Off grid, and grid-tie with backup• Built-in MPPT solar charger• LCD display panel for comprehensive information• Multiple communication• Green substitution for generators• User-adjustable battery charging current• Parallel connection capability (Maximum up to 6pcs)

SP Premium Series are a universal power supply tool for houses. It utilizes solar power at day time feeding it to your appliances like illumination lamps, TV, stereo and PC equipment, saving the power to the batteries for the night time usage, and selling the power surplus unused by the connected appliances to the grid.

On cloudy days when the solar power is weak, SP Premium Series take the lacking power from the grid. At night, the power stored in the batteries are being used for your equipment. With this true hybrid design, we give you the confidence that 100% of your solar power is fully utilized.

Operation Diagram:

SP4000 PremiumSP10000 Premium

SP15000 Premium



MODEL SP4000 Premium SP10000 Premium SP15000 PremiumRATED POWER 4000 W 10000 W 15000 WPV INPUT (DC)Maximum DC Power 5000 W 14850 W 22500 WNominal DC Voltage 360 VDC 720 VDC 720 VDCMaximum DC Voltage 580 VDC 900 VDC 900 VDCStart-up Voltage / Initial Feeding Voltage 116 VDC / 150 VDC 320 VDC / 350 VDC 320 VDC / 350 VDCMPP Voltage Range 120 VDC ~ 500 VDC 400 VDC ~ 800 VDC 400 VDC ~ 800 VDCMaximum Input Current 18 A 2×18.6 A PV1: 37.2A; PV2: 18.6AIsc PV (absolute maximum) 25 A 25 A 50 AMax. inverter back feed current to the array 0 A 0 A 0 AGRID OUTPUT (AC)Nominal Output Voltage 230 VAC 230 VAC (P-N) / 400 VAC (P-P) 230 VAC (P-N) / 400 VAC (P-P)Output Voltage Range 184 - 265 VAC 184 - 265 VAC per phase 184 - 265 VAC per phaseOutput Frequency Range 47.5 ~ 51.5 Hz or 59.3~ 60.5HzNominal Output Current 17.4 A 13 A per phase 21.7 A per phaseInrush Current/Duration 17.4 A / 20ms 17 A per phase / 20ms 28 A per phase / 20msMaximum Output Fault Current/Duration 52 A / 1ms 51 A per phase / 1ms 65 A per phase / 1msMaximum output Overcurrent Protection 52A 51 A per phase 65 A per phasePower Factor Range 0.9 lead – 0.9 lagAC INPUTAC Start-up Voltage 120-140 VAC 120-140 VAC per phase 120-140 VAC per phase Auto Restart Voltage 180 VAC 180 VAC per phase 180 VAC per phaseAcceptable Input Voltage Range 170 - 280 VAC 170 - 280 VAC per phase 170 - 280 VAC per phaseNominal Frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 HzAC Input Power 4000VA/4000W 10000VA/10000W 15000VA/15000WMaximum AC Input Current 40 A 25 A 40 AInrush Input Current 40 A 25 A 40 ABATTERY MODE OUTPUT (AC)Nominal Output Voltage 230 VAC 230 VAC (P-N) / 400 VAC (P-P) 230 VAC (P-N) / 400 VAC (P-P)Output Frequency 50 Hz / 60 Hz (auto sensing)Output Waveform Pure sine waveOutput Power 4000VA/4000W 10000VA/10000W 15000VA/15000WOutput Current 13 A per phase 21.7 A per phase

96%17.4A

91%BATTERY & CHARGERNominal DC Voltage 48 VDCMaximum Battery Discharging Current 110 A 250 A 375 AMaximum Charging Current 80 A 200 A 300 APHYSICALDimension (D×W×H) 117 × 438 × 535 mm 167.2 × 500 × 622mm 210 × 650 × 820 mmNet Weight 16.2 kgs 45 kgs 62 kgsINTERACECommunication Port RS-232/USBIntelligent Slot Optional SNMP, Modbus and AS-400 cards availableENVIRONMENTProtective Class IIngress Protection Rating IP20Humidity 0 ~ 90% RH (No condensing)Operating Temperature -10 to 55°CAltitude 0 ~ 1000 m*

Specifications

Product specifications are subject to change without further notice.*Power derating 1% every 100 m when altitude is over 1000m.








SP20000 Premium / SP30000 Premium

SP Premium SeriesSP Premium Series

Specifications are subject to change without notices.*These figures are based on VDE-4105 standard. All figures may very depending on different AC voltage and country requirements.**Power derating 1% every 100m when altitude is over 1000m.

Specifications

Features• Pure sine wave output 3-phase inverter• Programmable supply priority for PV, battery, or grid• True galvanic isolation transformation design• Programmable multiple operation modes: Grid-tie, off-grid and

grid-tie with backup• Monitoring software for real-time status display and control• Parallel operation up to 4 units (SP30000 Premium only)

True Hybrid Solar Inverter with Energy Storage

MODEL SP20000 Premium SP30000 PremiumRated Output Power 20KW 30KWMaximum Charging Power 20KW 30KWPV INPUT (DC)Maximum DC Power 30KW 45KWNominal DC Voltage/ Maximum DC Voltage 720VDC / 950VDCStart-up Voltage / Initial Feeding Voltage 500VDC / 550VDCMPP Voltage Range 500VDC ~ 900VDCNumber of MPP Trackers / Maximum Input Current 1 / 48A 1 / 72AGRID OUTPUT (AC)Nominal Output Voltage 230VAC* (P/N) / 400VAC (P-P)Output Voltage Range 184-265VAC per phaseOutput Frequency Range 47.5 ~ 51.5Hz or 59.3 ~ 60.5HzNominal Output Current 29A per phase 43.5A per phasePower Factor > 0.99EFFICIENCY

93% 95%AC INPUTAC Start-up Voltage / Auto Restart Voltage 120-140VAC per phase / 180VAC per phase 150-170VAC per phase / 180VAC per phaseAcceptable Input Voltage Range 170-280VAC per phaseMaximum AC Input Current 29A per phase 43.5A per phaseBATTERY MODE OUTPUT (AC)Nominal Output Voltage 230VAC* (P/N) / 400VAC (P-P)Output Waveform Pure Sinewave

>91%BATTERY & CHARGERNominal DC Voltage 384VDCMaximum Charging Current 50A 80APHYSICALDimension (D×W×H) 559×320×909mm 715×430×1021mmNet Weight 200kg 223kgINTERFACECommunication Port RS-232/USBIntelligence Slot Optional SNMP, GPRS, WIFI, Modbus cards availableENVIRONMENTHumidity 0 ~ 90% RH (Non-Condensing)Operating Temperature -10°C to 55°CAltitude 0 ~ 1000 m**

Maximum Conversion Efficiency (DC/AC)

Efficiency (DC to AC)




Operation Diagram:

SP20000 Premium / SP30000 Premium

SP Premium SeriesSP Premium SeriesTrue Hybrid Solar Inverter with Energy Storage








SP1600 AVR~ SP4000 AVR

SP AVR SeriesSP AVR Series

Features• Adjustable voltage-transfer points & charging voltage• Automatic restart of load after inverter shutdown• Smart AVR function (Two buck / boost modes)• Dual AC input for main & Generator• Wide input range 110V~360V• Dry contact signal to trigger auto-start generator• Cold-start capable• Battery Temperature Sensor• Full-functional of LCD display with Audible alarms• Intelligent double-stage charging control; Adjustable charging

current by DIP switches for different battery types• Thermal control cooling fan• DC/AC Isolation

Built-in AVR function.

Wide range of grid input for unstable electricity


Specifications

MODEL SP1600 AVR

SP2400 AVR

SP3200 AVR

SP4000 AVR

Rated Power 1600VA / 1200W

2400VA / 1800W

3200VA / 2400W

4000VA / 3200W

INPUT

Voltage 100V/110V/115V/120V or 200V/220V/230V/240V Selectable

200V/220V/ 230V/240V Selectable

Voltage Range 70V ~ 155V or 140V ~ 310V 140V ~ 310V

Regulation Range

Enhanced Buck +28% of selected nominal voltageBuck mode +10% of selected nominal voltageBoost mode -10% of selected nominal voltageEnhanced Boost -25% of selected nominal voltage

Frequency Range 50 Hz/ 60 Hz (Auto sensing)Surge Protection

1X0V 1824 Joules2X0V 1940 Joules

OUTPUTAC Voltage Regulation (Batt. Mode) ± 3% Crest FactorEfficiency (Normal mode)

3:197%

Transfer Time 3 msOver current protection YesWaveform Pure sine waveBATTERYBattery Voltage 24 VDC 36 VDC 48 VDCFloating Charge Voltage 27 VDC 40.5 VDC 54 VDC Low Battery Alarm Voltage 21 VDC 31.5 VDC 42 VDCShutdown Voltage 20 VDC 30 VDC 40 VDCOvercharge Protection 30 VDC 45 VDC 60 VDCMaximum Utility Charging Current 25 A 35 A 30 A SOLAR CHARGER (OPTIONAL)Maximum Power Rating 675W 1000WMaximum solar charge current 25A 20ASuuggested operating Voltage Range 30~40 VDC 40 ~ 63

VDC 60 ~ 84 VDC

Polarity Protection YesPHYSICALDimension (D×W×H) 510×200×180mm Net Weight 15kgs 26kgs 34kgs 41kgsOPERATING ENVIRONMENTOperating Altitude 0 ~ 3000 metersHumidity 5% to 95% Relative Humidity (Non-condensing)Operating Temperature 0°C - 40°CStorage Temperature -15°C - 55°C








Features

• High-Speed DSP digital control

• Full-bridge inverter control technology to secure 100% unbalanced loads

• Hot-swap modularized PV multi-chargers

• Built-in AC rectifier auto-regulated Grid power for charging battery & supplying the load

• Intelligent power supply function extends the battery life

• Multiple communication interface: RS232 / RS485 / Dry Contact

SP Giant SeriesSP Giant SeriesSP40000 Giant~ SP120000 Giant

SP Giant is a powerful three-phase Hybrid solar inverter with DSP digital control technology.

It is combined double-conversion, MPPT control & multi-level control technology.

Perfectly for medium-sized / large-scale residential, commercial and industrial PV applications.

SP80K Giant~SP120K Giant SP30K Giant~SP60K Giant

Operation Diagram:




Specifications

SP Giant SeriesSP Giant SeriesSP40000 Giant~ SP120000 Giant

MODEL SP40K Giant SP60K Giant SP80K Giant SP100K Giant SP120K GiantRated Power 40KVA / 36KW 60KVA / 54KW 80KVA / 72KW 100KVA / 90KW 120KVA / 108KWINPUTAC Voltage 380 VAC ± 20%Frequency Range Maximum Efficiency DC/AC

Peak Efficiency

50 / 60 Hz ± 5 Hz (settable)92% 93%

OUTPUTAC Voltage Regulation (Batt. Mode) 380 VAC ± 1%Output Frequency 50 / 60 Hz ± 1% (Auto sensing)

92% 93%Transfer Time (Inverter to Bypass) 0 ms Waveform Pure sine wavePeak Factor 1:3

Overload Capacity ≥ 105%~110% for 1 h, ≥ 110%~125% for 10 min, ≥ 125%~150% for 1min, ≥ 150% shut down in 10 s, ≥ 200% shut down immediately

BATTERYRated Battery Voltage 360 VDCFloating Charging Voltage 410 VDC (Default)Equalization Charging Voltage 415 VDC (Default)Shutdown Voltage 315 VDCMaximum Solar Charging Current 120A 180A 240A 300A 360AMaximum AC Charging Current 50 A 75 A 160 A 200 A 250 ASOLAR CHARGER & AC CHARGERPV Maximum Input Power 25KW×2 25KW×3 25KW×4 25KW×5 25KW×6PV Module Slot 3 4 6 8Maximum PV Array Open Circuit Voltage 750VDCPV Array MPPT Voltage Range 400~450VDCPV Array Input CurrentMax. Conversion Efficiency

120A 180A 240A 300A 360A98%

PHYSICALDimension (W×D×H) 600×700×1750mm 960×800×1700mmPackageDimension (W×D×H) 690×790×1850mm 1040×890×1750mmWeight 430kg 515kg 760kg 800kg 860kgCOMMUNICATION Interface RS232 / RS485 / SNMP (Option)Dry contact Overload / Low battery Voltage / Bypass / FaultOPERATING ENVIRONMENT & OTHERSHumidity 10% to 90% Relative Humidity(Non-condensing)Operating Temperature 0°C - 40°CAltitude 1% reduced of rated power per 100m, maximum 4000mIP Level IP20Noise 65dB








SP3000 Power-P/M ~ 5000 Power-M

SP Power SeriesSP Power Series

Features• Pure sine wave inverter• Built-in PWM or MPPT solar charge controller• Selectable input voltage range for home appliances and

personal computers• Selectable charging current based on applications• Configurable AC/Solar input priority via LCD setting• Compatible to mains voltage or generator power• Auto restart while AC is recovering• Overload and short circuit protection• Smart battery charger design for optimized battery

performance• Cold start function• Parallel operation up to 6pcs(SP3000 Power-P/M only) &

3pcs (SP5000 Power-M only)• Dual L phase design for 208V/120V input/output (SP5000

Power-M only)

Specifications


The system is designed for 120V voltage system.

Friendly solutions that shall help reduce on the electricity expense.

Built-in AC charger and PV solar charger controllers.

MODEL SP3000 Power-P SP3000 Power-M SP5000 Power-MRated Power 3000VA/2400W 3000VA/2400W 5000VA/5000WINPUT

Voltage 110/120VAC 110/120VAC(L-N) & 208/240VAC(L-N-L)


60-140 VAC (For Home Appliances)Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 110/120VAC ± 3% 110/120VAC(L-N) ± 3% &

208/240VAC (L-N-L) ± 3%Surge PowerPeak Efficiency

6000VA 10000VA90%

Transfer Time 10 ms (For Personal Computers) 20 ms (For Home Appliances)

10 ms (For Personal Computers) (L-N-L) 20 ms (For Home

Appliances) (L-N-L) 30ms (L-N)

Waveform Pure sine waveBATTERYBattery Voltage 24 VDC 48VDCFloating Charge Voltage 27 VDC 54VDCOvercharge Protection 33 VDC 60VDCSOLAR CHARGER & AC CHARGERMaximum PV Array Power 1250W 2000W 8000WMaximum PV Array Open Circuit Voltage 105Vdc 145Vdc

PV Array MPPT Voltage Range 30~80Vdc N/A

PV Array MPPT Voltage Range N/A 60~115Vdc

Maximum Solar Charging Current 50A 80A 80A×2

Maximum AC Charging Current 60A 60A 60A

Maximum Charging Current 110A 140A 220A

PHYSICALDimension (D×W×H) 120×295×468mm 130×623×610mmNet Weight 11kgs 11.5kgs 30kgsOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity (Non-condensing)Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C








SP1000 Senior

SP SeniorSP Senior

Specifications


MODEL SP1000 SeniorRated Battery Voltage 12V 24V Rated Power 800W 1000WSurge Protection 2000W 2400WOUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%

Frequency 50 / 60HzUSB Port 5Vdc @ 2100mAOutlet Socket 1pcs

> 85%Waveform Circuit Protection YesBATTERYBattery Voltage (Auto-detect) 12V 24V Low Battery Alarm Voltage 10.5V ± 0.5V 21V ± 0.5VShutdown Voltage 9.5V ± 0.5V 20V ± 0.5VOverload Protection 900W 1200WBattery Polarity Reverse By FusePHYSICALDimension (D×W×H) 345×137×79mm Net Weight 2.2KgOPERATING ENVIRONMENT


Operating Temperature 0°C - 55°CStorage Temperature -15°C - 60°C

Peak Efficiency

Modified Sine Wave

Small, light and flexible solution.

Simple life, simple inverter

Features• Dual output for 1pcs AC socket & 1pcs 5V 2.1A USB

• Green energy saving

• LED indicator design

• 12Vdc and 24Vdc Auto-Detect

• Reverse-polarity protection

• Output short circuit protection








SP300 Junior~ SP600 Junior

SP Junior SeriesSP Junior Series

Specifications


Model SP300 Junior SP600 JuniorDC System DC 12V DC 24V DC 12V DC 24VOutput Power Continuous Power 300W Continuous Power 600WSurge Power 900W 1500WStandby Current < 0.5A < 0.4A < 0.5A < 0.3AInput Voltage 10VDC~15VDC 20VDC~30VDC 10VDC~15VDC 20VDC~30VDCOutput Voltage AC 100V, 110V, 120V, 220V, 230V, 240V AC 100V, 110V, 120V, 220V, 230V, 240VOutput WaveformEfficiency

Simulated Sine Wave Simulated Sine Wave> 90% > 85%

Initial Checking Auto-Detecting Wrong Battery Cont. ex. 12V / 24VOutput Regulation +5/-8% Intelligent AVR ± 5% Intelligent AVROutput Frequency 50Hz , 55Hz , 60Hz Crystal ControlledCooling Control AUTO-OPERATION FANOutput Short Output Short Circuit Protection

Low Battery < 10.5V ± 0.5V PRE-ALARM, < 9.5V ± 0.5V Shut Down & Alarm

< 21V ± 1V PRE-ALARM, < 20V ± 1V Shut Down & Alarm

< 10.5V ± 0.5V PRE-ALARM, < 9.5V ± 0.5V Shut Down & Alarm

< 21V ± 0.5V PRE-ALARM, < 20V ± 0.5V Shut Down & Alarm

Over Heating > 60°C Pre-Alarm, > 65°C Shut Down & AlarmOver Load >330W Pre-Alarm, >360W Shut Down & Alarm >630W Pre-Alarm >660W Shut Down & Alarm

FuseBy FuseBattery Polarity Reverse

35A×1PC 20A×1PC 25A×3PCS 15A×3PCSAC Outlet 2 AC Outlets, EUROPEAN TYPE: 1 AC Outlet 2 AC Outlets, EUROPEAN TYPE: 1 AC OutletDimension (L×W×H) 120×73×73mm 215×113×62mmNet Weight 0.6Kg 1.5Kg








MODEL SC-3KW MPPTPV INPUTMPPT Range 60VDC~115VDCMaximum PV Array Open Circuit Voltage 145VDCMaximum PV Array Power 800W 1600W 3200WMaximum Input Current 50ABATTERYNominal Battery Voltage 12V 24V 48VConnected Battery Type Sealed lead acid, AGM or GelMaximum Charge Current 60AMaximum Efficiency 98%Charging Method Three stages: bulk, absorption, floatingPHYSICALDimension (D×W×H) 315×165×128 mmNet Weight 4.5kgsType of Mechanical Protection IP 31COMMUNICATION Humidity 5 ~ 95% RH (No condensing)Operating Temperature 0ºC to 55ºCStorage Temperature -15ºC to 60ºC

SC-3KW MPPT

Solar Charger MPPTSolar Charger MPPTFeatures• Intelligent Maximum Power Point Tracking technology increases

efficiency 25%~30%• Compatible for PV systems in 12V, 24V or 48V• Three-stage charging optimizes battery performance• Equalization charging for extension of battery life span• Maximum charging current up to 60A• Maximum efficiency up to 98%• Battery temperature sensor (BTS) automatically provides tempe rature compensation• Automatic battery voltage detection• Support wide range of lead-acid batteries including wet, AGM and gel batteries• Integrated intelligent slot compatible with SNMP/MODBUS commu nication • parallel charging function

Specifications









SC-20 MPPT ~ SC-40 MPPT

Solar Charger MPPTSolar Charger MPPT


Features• Innovative MPPT technology, tracking effciency 99.9%, conversion

efficiency up to 90%• Real-time display the operation data and working status of the

controller in digital, graphic and textual forms by a large LCD• AGM, Liquid and Gel battery for the selection• Two navigation buttons, easy to implement various operation• 12V/24V automatic recognition, temperature compensation, perfect

EMC design• Four stage charge way: MPPT, boost, equalization, float• Full automatic electronic protect function

Specifications

SC-20 MPPT & SC-40 MPPT solar charger controller improves the tracking efficiency up to 99.9%.

It provided RS485 interface that user can simply monitor the operation. BTS function is perfectly for temperature compensation.

Model name SC-20MPPT SC-40MPPTSystem voltage 12V/24V automatic recognition 24V/48V automatic recognitionMax solar current or load current 20A 40A(charging)/30(output)Max MPPT efficiency >99.9% >99.9%Max PV input power 260/520W 1000/2000WFloat voltage (25°C) 13.7V/27.4V 27.4V/54.8VBoost voltage (25°C) 14.5V/29.0V 29.0V/58.0VEqual voltage 14.8V/29.6V (Liquid,AGM) 29.6V/59.2V (Liquid,AGM)Day/Night threshold 8.0V/16.0V 16.0V/32.0VLoad disconnect voltage 10.8~11.8V/21.6~23.6V 21.6~23.6V/43.2~47.2VLoad reconnect voltage 11.6~12.8V/23.2~25.6V 23.2~25.6V/46.4~51.2VBattery type Liquid, GelWork mode Standard, D2D(DUSK to Dawn),Street lamp , User mode

Temperature compensation -4.17 mV / K per cell (Boost and Equal charge) -3.33 mV / K per cell (Float charge)

Max solar voltage 100V 150VMax battery voltage 40V 65VDimension 189×182×64mm 189×255×89mmWeight 1.3Kg 2.5KgMax power consumption 8mA(12V);12mA(24V) 8mATemp. Range during operation - 20°C ~ + 55°CStorage temperature - 25°C ~ + 80°CAmbient humidity 0%~100% RHCase protection IP32








SC-10 MPPT ~ SC-20 MPPT

Solar Charger MPPTSolar Charger MPPT

Features• Innovative MPPT technology, conversion effciency up to 98%• Many choices of battery type and working mode• Clear readable display of charge/discharge, battery and error description • 12V/24V automatic recognition• Temperature compensation • Perfect EMC design• Four stage charge way: MPPT, boost, equalization, float• Full automatic electronic protect function

Specifications


Model name SC-10 MPPT SC-15 MPPT SC-20 MPPTSystem voltage 12V/24V automatic recognitionMax solar current or load current 10A 15A 20A

98%Max PV input powerMax MPPT efficiency

12V: 150W, 24V: 300W 12V: 225W, 24V: 450W 12V: 300W, 24V: 600WFloat voltage 13.7V/27.4V(25ºC) Boost voltage 14.5V/29.0V(25ºC)Equal voltage 14.8V/29.6V(25ºC) (Liquid)Day/Night threshold 5.0V/10.0VLoad disconnect voltage 11.2~11.8V/22.4~23.6VLoad reconnect voltage 12.5V/25.0VBattery type Liquid, GelWork mode Standard, D2D(DUSK to Dawn)

Temperature compensation -4.17 mV / K per cell (Boost and Equal charge) -3.33 mV / K per cell (Float charge)

Max solar voltage 100VMax battery voltage 40VDimension/Weight 164×189×73mm / 800g 164×189×73mm / 900gMax power consumption 10mATemp. Range during operation - 35ºC~ + 55ºCStorage temperature - 40ºC ~ + 80ºCRelative humidity 10%~90% Non-condensationCase protection IP22








SC-30MAX ~ SC-60MAX

Solar Charge ControllerSolar Charge ControllerBrand new SC MAX series with state-of-the-art technology bring you unprecedented experence in solar power utilization.

Features

• LCD display for status and settings

• One-year data memory

• 12V/24V automatic recognition

• Automatic temperature compensation

• Multiple battery choices

• Four-stage charge method

• Electronic protections

Specifications


Model SC-30MAX 48VDC SC-30MAX SC-40MAX SC-50MAX SC-60MAX

Nominal voltage 48V 12V / 24V automatic recognition

Max solar current or load current 30A 30A 40A 50A 60A

Max solar voltage 100V 55V

Max battery voltage 64V 40V

Dimensions / Weight 127 × 189 × 47 mm / 550g 127 × 189 × 47 mm / 550g 127 × 164 × 47 mm / 690g

Max. wire size 25 mm2 50 mm2

Typical power consumption 7 mA 13.8 mA 15 mA

Working temperature -10°C ~ 60°C

Storage temperature -25°C ~ 80°C

Relative humidity 10%~90% Non-condensation

Case protection IP32








SC-10SM-D ~ SC-20SM-D

Features• Output constant current • Four stages PWM charge way: fast, boost, equal, float• Many modes for solar street light system• 12/24V automatic recognition• Full automatic electronic protect function• IP67, strong and durable aluminum case

Three time periods, Dimming function: 0~100% of rated power adjustable

Specifications

Solar ChargerSolar Charger

Model SC-10SM-D SC-20SM-DMax solar current 10A 20ASystem voltage 12V/24V automatic recognitionOutput power (W) 12V: 25~50W / 24V: 50~100W 12V: 30~60W / 24V: 60~120WOutput current (A) 12V: 0.6~3.5A / 24V: 0.9~4.0AOutput voltage (V) 12V: 16~40V / 24V: 32~55V Precision of Constant currentRepresentative efficiency

±2%95%

Dimming 0~100%Fast voltage 14.0V/28.0V (25°C)Boost voltage 14.5V/29.0V(25°C)Equalization voltage 14.8V/29.6V (25°C) (Liquid)Float voltage 13.7V/27.4V (25°C)Load disconnect voltage 10.8~11.8V/21.6~23.6V; SOC1~5 (Programmable)Load reconnect voltage 12.5V/25.0VOver voltage protection 15.5V/ 31.0VDay / Night threshold 3.0~8.0V/6.0~16.0V (Programmable)Battery type Liquid / GelMax solar voltage 55VMax battery voltage 40VTemperature Compensation -4.17mV/K per cell (Boost / Equalization); -3.33mV/K per cell (Float)Working time during night Time1: 0~14 Hours / Time2: 0~14 Hours / Time3: 0~15 Hours (Programmable)Dimensions / Weight 114x85x25.1mm / 360gWire size 2.5mm² 4mm²Typical power consumption 10mAAmbient temp. -40°C ~ +60 °CCase protection IP67Max altitude 4000m









SC-10~20SM/SM-Z

Solar ChargerSolar ChargerFor a variety of load applications, SC-SM and SC-SM-Z series offer you options.

SC-SM series with a PV sensor can output or not depending on PV power of levels, whereas SC-SM-Z series can continuously output whatever PV power exists or not.

Features

• 12V/24V automatic recognition

• Automatic temperature compensation

• Three-stage charge method

• Electronic protections

• IP68 enclosure

Specifications


Model SC-10SM/SM-Z SC-20SM/SM-ZNominal voltage 12 V / 24 V automatic recognition

Max solar current or load current 10A 20A

Boost voltage 14.5 / 29 V (25ºC)

Equalization voltage 14.8 / 29.6 V (25ºC)

Float voltage 13.7 / 27.4 V (25ºC)

Battery type Flooded, Sealed

Max solar voltage 55V

Max battery voltage 40V

Cable length 120mm / 80mm

Over voltage protection 15.5 V / 31.0 V

Dimensions / Weight 85 × 70 × 20 mm / 200g 85 × 85 × 20mm / 210g

Wire cross-section SC-10SM/SM-Z: 2.5 mm2; SC-20SM/SM-Z: 4 mm2

Typical power consumption Lower than 13mA / 15mA

Working temperature -40°C ~ 60°C

Case protection IP67

Max altitude 4000 m








sp1000 ~sp5000 initial-p/-m sp initial series

Documents