southtex modular approach gas treatment jlh (2)
TRANSCRIPT
A Different Kind of Energy Company
SouthTex Treaters Fabrication FacilityModular and Skid Design of
Treating Equipment
• Largest provider of treating and processing equipment in U.S.• Leasing business
– Over 350 skid mounted units Co2 and H2S removal Mechanical Refrigeration Units
• Fabrication business – 80 acre fabrication facility in Odessa, TX
Amine Plants for Co2 and H2S removal Propane Refrigeration Units Stabilizers Dehydration Units
• Client List– Small independents to majors– Midstream companies– EPC’s
Presence throughout the United States
Fabrication FacilitiesKMT EquipmentHeadquartersKM Pipelines
Fabrication Capabilities
Manufacturing
Facility Features• 84 acre yard• 80,000 sq. ft. covered fabrication area• 19 overhead cranes from 5‐50 ton• 380 tons maximum lift capacity• 11 vessel fabrication stations• 5 forklifts and 4 manlifts• 3 rough terrain cranes
Piping and Skid Fabrication • Carbon Steel and Stainless Steel• ASME B31.3• Fabricate up to 14’W x 50’L skidsVessel Capability‐ ASME Code • 24” – 120” OD carbon Steel• .375” – 4” thick
Vessel Materials Stocked On Site• 36" ‐ 120" shells and heads
− Rated for 150# service − 1/16 " corrosion allowance
• 54" ‐ 78" shells and heads − Rated for 1440# service− 1/16" corrosion allowance
• 2" ‐ 24" vessel nozzles ANSI 150# Class• 2" ‐ 20" vessel nozzles ANSI 600# Class
Storage Area Administration Building
Material Laydown and Fabrication
Odessa, TX
Modular Approach to EquipmentAdditional Stabilizer Information:• Designs for 10,15,25 MBbl/D• Lead time of 24 weeks• Currently have 2 5,000 bbl in stock
Engineering and Drafting Capabilities
Engineering
Mechanical, chemical, electrical and process engineeringOver 60 years of combined experience
Drafting
Piping and Instrumentation, Electrical and ControlsIsometric 2 and 3D Modeling
Software
Vessel calculationProcess simulationEquipment sizing
Quality System
Pressure Vessel Quality Control ManualSince 1996 ‐ 5th edition in use, 6th edition to be effective Jan. 6, 2015Jointly audited by State of Texas Licensing Authority and by Inspection Agency (authorized inspector)Quality manager authorityProduction manager authorityEngineering responsibility
design and calculations / specifications signature control enforced
Applied to pressure vessels
ISO 9001 Quality SystemISO 9001 Certified Applied to the entire facilityAudited internally and externally by Registrar
What SouthTex Does for better service
• Build and stock inventory for most popular units (amine, stabilizers, vessels)
• Customizes process design for each customer• Offers customized origin of materials and supplier of equipment
(pumps, filters, heat exchangers etc.)• Offers customized I&E equipment (valves, transducers) and
PLC logic of operation• FAT on controls equipment