HAZARDOUS AND KleenSweep BettaClean Oil-Only Pads Universal PadsNON-HAZARDOUS LIQUIDS Socks & Pillows Socks & PillowsFuels and Lubes ✓✓ ✓Hydraulic Fluids ✓✓ ✓Coolants ✓✓ ✓Common Acids & Alkalis (photo & pool chemicals, etc.) ✓✓Concentrated Acids & Alkalis (lab strength chemicals, etc.)

Solvents (ketones, halocarbons, alcohols, etc.) ✓✓ ✓ ✓Paints (oil based) ✓✓ ✓Paints (water based) ✓✓Drying Oils (linseed, pine oil, cod liver oil, etc.) (1) ✓✓ ✓Pesticides (solvent based) ✓✓ ✓Pesticides (water based) ✓✓ ✓Vegetable Oils or Animal Fats (liquid) ✓✓ ✓Water-based compounds (ie: detergents, food, etc.) ✓✓ ✓Pharmaceuticals/Drugs ✓✓ ✓Body Fluids (blood, urine, vomit, etc.) (2) ✓✓ ✓

Health, safety & environmental risks from Dangerous Goods Liquids can vary considerably. In general, Enretech sorbents can be used for many DG Liquids, however seek help for all spills involving Packing Group I DG Liquids. Contact Enretech Australasia (0425 232 741) for furthertechnical assistance, as required.

Notes: (1) Drying oils can have high risk of spontaneous combustion. Take appropriate precautions. (2) Body fluid spills have potential health risks associated with them. Take appropriate precautions.(3) Compounds classed as Oxidisers by ADG and GHS systems should not come into contact with organic materials of any kind. When used for liquid spill clean-up, sorbents tend to take on the characteristics of the liquid they have absorbed. Thus, always consult the MSDS of the spilled liquid prior to absorption withEnretech sorbents.

DANGEROUS GOODS LIQUIDSClass 3 - Flammable Liquids

OIL SPILLS ON LAND, OR SHORELINES

Use Enretech-1 to bioremediate the contamination in-situ, or excavate the contaminated soil and treat via ex-situ biofarm.Refer to the Enretech-1 bioremediation section of this webpage for more information.

OIL SPILLS ON WATER

Absorb floating oil using Cellusorb as a loose particulate, or in the form of “Oil Only” absorbent socks, pillows or booms.For larger spill areas, use “Oil Only” cotton pads instead of loose particulate Cellusorb.

✓✓ ✓ ✓Class 5 - Oxidising Substances (3)

Class 6 - Toxic and Infectious Substances ✓✓ ✓Class 8 - Corrosive Substances (acid or alkali) ✓✓ ✓Class 9 - Miscellaneous Dangerous Goods ✓✓ ✓

Know Your Risks and How to Deal with a Spill SafelyYou must conduct a risk assessment of your operations to determine the types and volumes of liquids you will most likely spill, and what type ofsorbents you’ll need to clean them up. Use the following chart to determine the best Enretech sorbent for your particular workplace.

Spills on Hard Surfaces (sealed or unsealed)

SORBENT SAFETY GUIDE

Use HazChem products ONLY

Use HazChem products ONLY

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 300 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (U.S. Web Coated \050SWOP\051 v2) /PDFXOutputConditionIdentifier (CGATS TR 001) /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /Unknown

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /UseName /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ] /SyntheticBoldness 1.000000>> setdistillerparams> setpagedevice