s.o.r 2020(1) pdf · unit rate in rs. materials pwd spec. no. schedule item no. 12-fine sand fm...

1 - INDEX 1

2 - OFFICE ORDER 2

3 - IMPORTANT INSTRUCTIONS 3-6

4 - EXTRA CONDITIONS FOR LABOUR WORK ONLY 7

5 1 MATERIALS 8-16

6 2 LABOUR 17-18

7 3 CARTAGE 19-22

8 4 EARTH WORK 23

9 5 CONCRETE WORK 24-25

10 6 BRICK WORK 26

11 7 DAMP PROOF COARSE 27

12 8 ANTI TERMITE TREATMENT 28

13 9 DOORS & WINDOWS 29-33

14 10 MILD STEEL & IRON WORK 34-36

15 11 ROOF WORK 37-40

16 12 CEILING AND LINING 41-45

17 13 PLASTER & POINTING 46-48

18 14 FLOORING 49-52

19 15 PAINTING & DISTEMPERING 53-56

20 16 WHITE WASHING & COLOUR WASHING 57

21 17 DEMOLITION & DISMANTLING 58-59

22 18 MARBLE WORK IN WALL LINING ETC. 60

23 19 MISCELLANEOUS 61-62

24 20 ROAD WORK 63-66

25 21 WATER SUPPLY MATERIALS 67-69

26 22 SANITARY MATERIALS 70-71

27 23 WATER SUPPLY WORKS 72-80

28 24 SANITARY FITTINGS 81-84

29 25 DRAINAGE 85-87

30 26 ANNUAL REPAIRS 88

31 27 TRAFFIC SIGN 89-90

32 - CONSUMPTION OF BUILDING MATERIALS 91-92

mÙkj izns'k yksd fuekZ.k foHkkxINDEX

Sl. No.

Chapter Description Page No.

Page 1

1- BRICK(a) Class 150 1.1.1 1000 Nos 5800.00(b) Class 100 1.1.2 1000 Nos 5600.00(c ) Straight over brunt Class-275 1.1.4 1000 Nos 5400.00(d) Tiles, Bull Nose Drip Course Brick 1.1.4 1000 Nos 5700.00

2- BRICK BALLAST(a) Overburnt brick ballast 40mm gauge 1.2 Cum 1200.00(b) Class-150 brick ballast 25mm gauge 1.2 Cum 1300.00(c ) Brick Bats of O.B.B./Class150 1.2 Cum 900.00

2(A) Fly ash Brick (Specification/Strengh should not be less than bricks 150) (Size-230mmx110mmx75mm)

1000 Nos 6100.00

2(B)Autoclaved Aerated Concrete (AAC) Block conforming to IS-2185-2005(part-III) including loading, cartage upto site, unloading, stacking including all levies and octroi, royalities if any

cum 3000.00

STONE BALLAST (From Khera Thakur Quarry)45-90 mm guage stone ballast. Cum 550.00CRUSHED STONE BALLAST /GRIT (From Ghatri Quarry)45-63 mm guage stone ballast. Cum 650.0022.4-53 mm guage stone ballast. Cum 750.0040mm guage stone ballast Cum 875.0020mm guage stone ballast Cum 875.00Crushed stone Dust 2.36mm & below Cum 625.0013.20mm guage Cum 900.00

CHAPTER-1MATERIAL

Unit Rate in Rs.

Rates as per S.E.

Agra Circle, PWD, Agra Letter No.-

14/ 2m-Agra

3(B)

MATERIALS

3(A)

PWD Spec. No.

Schedule Item No.

11.20mm guage Cum 900.006.7mm guage and below Cum 850.00STONE BOULDER (From Khera Thakur Quarry) (A) 25-40 Kg Cum 500.00(B) 40-60 Kg Cum 525.00(C) Stone Bricks Dressed (Size 22- 25 × 10-12 ×10-12 cm) Each 5.00GRIT : District Gwalior MP Quarry (Berja, chandrapura, Turak Pura, Parsen & Sumerpada) District Bhind M.P (Pali Dirman & Plparsana)(A) 20-40 mm Gauge Cum 850.00(B) 20 mm Gauge Cum 950.00(C) 19 mm Gauge Cum 950.00(D) 16 mm Gauge Cum 950.00(E) 13.2 mm Gauge Cum 765.00(F) 11.2mm Gauge Cum 765.00(G) 10mm Gauge Cum 765.00(H) 5.6mm/6.7mm Gauge Cum 615.00(I) 2.36mm Gauge/ Stone Dust Cum 615.00

4 (A) I Shaped Precast Interlocking Tiles(strength of 30MPA) at site(i) 60 mm thick(A) Grey Each 15.00(B) Coloured Each 16.00(C) Rubber Moulded Each 15.50(D) Coloured Rubber moulded Each 16.50(ii) 80 mm thick(A) Grey Each 17.00(B) Coloured Each 20.00(C) Rubber Moulded Each 19.00(D) Coloured Rubber moulded Each 21.00

3(D)

3(C)

Agra Circle/2020 Dt. 01-01-

2020

Rates as per SE

Agra Circle, PWD, Agra Letter No.-

14/ 2m-Agra

Circle/2020 Dt. 01-01-

2020

Page 8

Unit Rate in Rs.MATERIALS PWD

Spec. No.Schedule Item No.

(iii) 100 mm thick(A) Grey Each 21.00(B) Coloured Each 23.00(C) Rubber Moulded Each 22.00(D) Coloured Rubber moulded Each 24.00Rubber Moulded Cement concrete Kerb stone M-20Size 12"×12" ×6" Each 85.00Size 12"×16" ×6" (Plain) Each 110.00Size 12"×16" ×6" (Designer) Each 120.00Size 12"×18" ×6" Each 125.00

4- (C) PLAIN GLASS (Best Quality, Cut to Size)5mm thick 19.11 Sqm 600.004mm thick 19.11 Sqm 500.003mm thick 19.11 Sqm 450.00Note:- For Pinhead glass the rates will be 10% less than the above rates.

5- GLASS STRIPS(A) 22mm wide- 2.8 to 3.7 mm thick RM 5.50(B) 32mm wide 2.8 to 3.7 mm thick RM 6.50(C ) 32mm wide, 5mm thick RM 8.60

6- LIME(A) From Maihyer 1.2.1 Quintal 650.00(B ) Katni IS 712.1964 Quintal 700.00

7- REINFORCEMENT & STRUCTURAL STEEL(A) TMT Bar Fe 500- 8mm dia Quintal

(B) TMT Bar Fe 500- 10mm to 12mm dia Quintal

(C)TMT Bar Fe 500 16mm to 32mm dia

4(B)

As per current price

list from SAIL

(Excluding (C)TMT Bar Fe 500 16mm to 32mm dia Quintal

(D) MS Angle 226,KST,45-5 Quintal 4300.00(E) MS Tee IS1977KST32-0 Quintal 4300.00(F) MS Channel - 75x40MM (IS 2062 E 250 BR) Quintal 4300.00(G) MS Channel - 100x50MM (IS 2062 E 250 BR) Quintal 3800.00(H) M.S.Flat Iron 10.2.2.21S Quintal 4300.00(I) M.S.Iron plate Quintal 5200.00(J) M.S. Square Bar Quintal 4300.00(K) MS Round /D/ Square/Rectangular HolIow Pipes/Tubes Quintal 5200.00(L) RS Joist/ISMB Quintal 4800.00

8- MARBLE CHIPS(A) White- Snow white Quintal 350.00(B) White- Commercial White Quintal 250.00(C ) Red Blood Colour Quintal 300.00(D) Black and other Colour Quintal 300.00

9- MARBLE DUSTMarble dust (200 mesh) Quintal 250.00

10- GLAZED TILES (I.S.I. Marked or equivalent) Thickness 6 mm(A) 300mm x 450mm size - White Piece 65.00(B) 300mm x 450mm size- Coloured Piece 70.00(C ) 250mm x 375mm size - White Piece 40.00(D) 250mm x 375mm size- Coloured Piece 45.00(E) For floor 300mm x 300mm size- White Piece 45.00(F) For wall 200mm x 300mm size- Coloured Piece 30.00

11- COARSE SAND (Excluding actual Bulkage) 1.9For Distt Firozabad Cum 2700.00For Distt Mainpuri Cum 2800.00

(Excluding GST)

Page 9



12- FINE SAND FM 1.25 (Excluding Actual Bulkage) Dholpur 1.9For Distt Firozabad Cum 1900.00For Distt Mainpuri Cum 2000.00 Local Sand Cum 1000.00

13- CEMENT (A) Ordinary Portland Cement (J.P., A.C.C., Birla, J.K. or equivalent) O.P.C. 1.8 Bag(50kg) 275.00(B) Pozzolona Portland Cement (P.P.C.) J.P., ACC Birla, JK,equivalent) Bag(50kg) 250.00(C) White Cement (J.K. or Birla Brand) I.S. 8042-1978 Bag(50kg) 700.00

14- Surkhi 1.13 Cum 600.0015- MARBLE/STONE TILES

(A) Marble white Alebeta 20mm (60cm x 60cm Size) Sqm 1800.00(B) Marble white Dhungri 20mm (60cm x 60cm Size) Sqm 1550.00(C ) Marble white Adanga 20mm (60cm x 60cm Size) Sqm 1200.00(D) Black granite (Polished) in big slab 20mm thick Sqm 3000.00(E) Black granite (Polished) in big slab 10mm thick Sqm 1600.00(F) Granite (Polished) upto 0.50 Sq.M. slab 18mm thick Sqm 1750.00(G) Granite (Polished) above 0.50 Sq.M. slab 18mm thick Sqm 1950.00(H) Kotastone of ASI (K) 16 to 24mm thick, 60cm x 60cm Sqm 500.00(I) Kotastone of ASI (K) 25 to 40mm thick, 60cm x 60cm Sqm 625.00(J) Baroda green 20mm thick, (60cm x 60cm Size) Sqm 1100.00

16- PRECAST TILES(i) Precast Terrazzo Tiles 20mm thick with gray cement (250mm x 250mm size) Sqm 250.00 (125mm x 250mm size) Sqm 150.00(II) Precast Terrazzo Tiles 20mm thick white cement

(250 mm x 250mm size) Sqm 260.00 (125mm x 250mm size) Sqm 160.00(III) Chequered Terrazzo Tiles with grey cement(300x300mm) Sqm 260.00

17- BELL/KAJARIA , ROMANO, SOMANY, ORIENT, ASIAN, JOHNSON TILES.(White Cloudy - ordinary colours)(I) For Floor size 300 x 300mm- White I.S. 777-1970 Sqm 525.00(II) For Wall-size 200 x 300mm - Coloured I.S. 13755-89 Sqm 500.00(III) For Wall-size 300 x 600mm - Coloured I.S. 13755-89 Sqm 600.00(IV) Vitrified Tiles 600 x 600mm 10MM Thick I.S. 13755-89 Sqm 650.00(V) For Floor size 300 x 300mm- White(Anti skid tiles) I.S. 777-1970 Sqm 550.00(VI) Vitrified Tiles 600 x 600mm 10MM Thick (Anti Skid Tiles) Sqm 700.00

18- Aluminum, DOOR FITTINGS(A) I.S.I. Marked Aluminum Tower Bolt (With Fixers) (I) 10mm dia 80mm long Dozen 400.00 (II) 10mm dia 100mm long Dozen 450.00 (III) 10mm dia 150mm long Dozen 550.00 (IV) 10mm dia 200mm long Dozen 680.00 (V) 10mm dia 300mm long Dozen 980.00(B) I.S.I. Marked Aluminum Sliding Bolt with nuts & bolts. (I) Bolt 16mm dia 20mm long Each 160.00 (II) Bolt 16mm dia 250mm long Each 180.00 (III) Bolt 16mm dia 300mm long Each 210.00(C) I.S.I. Marked Aluminum door Handle (I) 100 mm long Each 50.00 (II) 125mm long Each 65.00(D) Aluminum Door Stoppers Each 65.00

Page 10



19- STEEL 304 GAUGE FITTINGS (I.S.I. MARKED ONLY)(A) Steel Tower Bolt with 10mm dia rod & screw 100mm long Each 30.00(B) Steel Tower Bolt with 10mm dia rod & screw 150mm long Each 50.00(C ) Steel Tower Bolt with 10mm dia rod & screw 200mm long Each 60.00(D) Steel Tower Bolt with 10mm dia rod & screw 250mm long Each 80.00(E) Steel Tower Bolt with 10mm dia rod & screw 300mm long Each 95.00(F) Steel Sliding Bolt with 16mm dia rod & screw 200mm long Each 75.00(G) Steel Sliding Bolt with 16mm dia rod & screw 250mm long Each 100.00(H) Steel Sliding Bolt with 16mm dia rod & screw 300mm long Each 105.00(I) Steel door Handles with screw 100mm long Each 60.00(J) Steel door Handles with screw 125mm long Each 70.00(K) SS door Handles with screw 300mm long For Fully Glaszed Door Each 1200.00

Note:- For other quality less 30% on above rate.20- MISCELLANEOUS. FITTINGS

(a) I.S.I Marked Iron Hinges50mm long Dozen 75.0063mm long Dozen 90.0075mm long Dozen 95.00100mm long Dozen 180.00125mm long Dozen 280.00150mm long Dozen 350.00Male & Female hinges for M.S. Gate kg 80.00M.S Hingage for Gate kg 75.00(b) I.S.I Marked Steel Hinges50mm long Dozen 120.0063mm long Dozen 144.0075mm long Dozen 180.00100mm long Dozen 300.00125mm long Dozen 420.00150mm long Dozen 540.00(a) Oxidized window catcher Right & Left Each 20.00(b) Oxidized Iron Stay Each 30.00(c) Iron Screw (Needle fold) 12mm 200 Nos 55.00(d) Iron Screws 15mm 200 Nos 65.00(e) Iron Screws 20mm 200 Nos 70.00(f) Iron Screws 25mm 200 Nos 95.00(g) Iron Screws 30mm 100 Nos 65.00(h) Iron Screws 35mm 100 Nos 70.00(i) Iron Screws 40mm 100 Nos 75.00(j) Iron Screws 50mm 100 Nos 95.00(k) Bolts & nuts upto 13mm dia Kg 80.00(l) Above 6mm dia but upto 13mm dia Kg 85.00(m) Above 13mm dia but upto 18mm dia Kg 95.00(n) Bolt Type Fastener 50 mm long Each 5.00(o) Bolt Type Fastener 75 mm long Each 7.00(p) Pin Type Fastener 100 mm long Each 12.00(q) Pin Type Fastener 150 mm long Each 15.00

21- PAINT & DISTEMPERSOil Bound Distemper (Oil paste of best quality viz, Asian, Burger, J&N)(a) White 5 kg pack 450.00(b) Coloured 5 kg pack 500.00Lead White (Safeda) Per kg 130.00Paints Synthethic Enamel Superior Quality (Asian, Burger or Equivalent) Per Litre 265.00

Page 11



PrimerFor Wood Per Litre 165.00For Metal (Red Oxide) Per Litre 150.00Cement primer for interior (Asian, Burger or Equivalent) Per 20 Kg Pack 2100.00Cement primer for Exterior (Asian, Burger or Equivalent) Per 20 Kg Pack 2400.00Water Proof Cement Paint Per kg 60.00Putty (Birla White/Nerolac/J.K or Equivalent) Per 20 Kg Pack 450.00Royal shine paint or Equivalent (Plastic Paint) Per Litre 450.00Exterior Emulsion Paint (Apex) or Equivalent Per 20 Kg Pack 4400.00Epoxy paint ( superior quality) Per Litre 400.00Epoxy primer Per Litre 380.00

22- IRON SHEETS(a) Iron sheet Galvanized plain 10.22 (I.S.- 1987) Quintal -(i) 22 gauge (0.80mm) KST 440 Quintal 6300.00(ii) 24 gauge (0.63mm) KST 440 Quintal 6400.00(b) Iron Sheet Galvanized Corrugated 24gauge (0.63mm) I.S.- 1852-1977 Quintal 6300.00(c ) Iron Sheet Galvanized Corrugated 18gauge (1.25mm) 10.2.2IS1987 Quintal 6200.00(d) M.S. Iron Sheet Plain Quintal 6100.00(e) Galvanized Iron wire gauge (24x14) machine made Sqm 165.00(f) Expanded metal 2.0cm. 16/17 gauge Sqm 160.00(g) M.S. binding wire 20 gauge kg 60.00

23- MESHES(i) Welded mesh 1" x 2" size of 10gauge wire Sqm 240.00(ii) Welded mesh 1" x 3" size of 10 M.S. Wire Sqm 320.00(iii) Welded mesh 2" x 2" size of 10mm gauge Sqm 170.00(iv) Murga Jali 1/2" x 24 gauge Sqm 65.00(v) Mosquito/Fly Proof Stainless Steel grade 304 wire mesh gaugewith 0.50 mm dia wire and 1.40mm wide aperture. Sqm 480.00

24- BOARD & DOORS (I.S.I. Marked) with water Proof and Anti Termite Treated(1) Plywood 19mm Thick Sqm 950.00(2) Plywood 10mm Thick Sqm 830.00(3) Plywood 6mm Thick Sqm 650.00(4) Flush Door 30mm thick Commercial (I.S.I. Marked) Sqm 950.00(5) Flush Door 32mm thick Commercial (I.S.I. Marked) Sqm 1050.00(6) Flush Door 35mm thick Commercial(I.S.I. Marked) Sqm 1100.00(7) Flush Door 30mm thick Teak (I.S.I. Marked) Sqm 1650.00(8) Flush Door 32mm thick Teak (I.S.I. Marked) Sqm 1700.00(9) Flush Door 35mm thick Teak (I.S.I. Marked) Sqm 1750.00(10) Flush Door 40mm thick (I.S.I. Marked) Sqm 1300.00(11) Fiber wood particle board 12 mm thick Sqm 425.00(12) Veneered particle board 12mm thick Sqm 630.00(13) Veneered particle board 20mm thick Sqm 750.00(14) Veneered particle board (Deco.) 12mm thick Sqm 650.00(15) Teak wood particle board 19mm thick Sqm 800.00

(16) Teak wood particle board 19mm thick (Laminated on one side) Sqm 800.00

(17) Teak wood particle board 12mm thick Sqm 750.00

Page 12



25- MISCELLANEOUS(1) G.I. Barbed wire (Hot Dip) 10.7 (I.S. 278) Quintal 6400.00(2) Washer (Limpet) 100 Nos 50.00(3) Washer (Bitumen) 100 Nos 45.00(4) Washer G.I. 100 Nos 50.00(5) J. Hooks Kg 90.00(6) Rope (Moonj) Kg 75.00(7) Rope (Hemp) Kg 90.00(8) Rope (Cotton) Kg 85.00(9) Spun yarn 10.2.2. I.S. 1148 Kg 65.00(10) Rivets Kg 115.00(11) Nails (Country) Kg 125.00(12) Nails (wire) Galvanized Kg 100.00(13) Tarfelt Sqm 180.00(14) Pulley (For Rolling Shutter) Each 300.00(15) Rolling Shutter 80X0.90mm lath Sqm 1150.00(16) Rolling Shutter 80X1.25mm lath Sqm 1525.00(17) Hood Cover (For Rolling Shutter) RM 340.00(18) Top Cover (For Rolling Shutter) 0.90 mm thick RM 365.00(19) Top Cover (For Rolling Shutter) 1.25 mm thick RM 440.00(20) Coil Spring (For Rolling Shutter) Each 450.00(21) Ball Bearing (For Rolling Shutter) Each 300.00(22) R.C.C. Jali 2.0 x 0.75 x 50mm Sqm 170.00(23) R.C.C. Jali 1.25 x 0.60 x 40mm Sqm 165.00(24) R.C.C. Jali 0.75 x 0.50 x 32mm Sqm 155.00(25) Plaster of Paris 50 kg bag 300.00(26) Hessian Cloth Sqm 35.00(27) Perforated tiles 60cm x 60cm x 12mm thick for false celling Sqm 290.00(28) Perforated decorative tiles 60cm x 60cm x 12mm thick for false celling Sqm 500.00

(29) Aluminum Tee- Channel 2mm thick RM 100.00(30) Caustic Soda or Oxalic acid kg 70.00(31) A.C. Pipe 100mm Dia 6 ft. long Each 220.00(32) M.S. Clamp for A.C. Pipe Each 25.00(33) Shoe for A.C. Pipe Each 60.00(34) Holder label for A.C. Pipe Each 40.00(35) Head including Rose for A.C. Pipe Each 60.00(36) Bend Each 60.00(37) Z Section for steel windows.(38) F7-d Section @ 1.42 kg/RM 10.2.2 (I.S.227) kg 55.00(39) F4-B/T2/T6 Section @ 2.280 kg/RM 10.2.2 (I.S.228) Kg 55.00(40 ) F27-Section 10.2.2 (I.S.228) kg 55.00(41) EZ-7 Section @ 1.9 kg/RM 10.2.2 (I.S.228) kg 55.00(42) Ballies (100mm average dia) RM 60.00(43) Water Proofing Compound ( Dr. fiixit) Litre 150.00(44) Polish (Mainsion & Wax) 15.92 & IS 348-1968 Per kg 370.00(45) Wood Preservator in 5 litres Drum IS218-1961 Per Litre 75.00(46) Aldrin Concentrate Tow 0.3 ( Nosil Brand or Equivalent as per IS 1307) Per Litre 30.00(47) Traffic cones Nos. 500.00

Page 13



26- Anodized Aluminum Sections(a) 100 x 44.5 x 2mm thick kg 290.00(b) 83.5 x 44.65 x 2mm thick kg 290.00(c ) 114 x 44.5 x 2mm thick kg 290.00(d)Powder Coated aluminium ( minimum thickness of powder Coating 50 micron) kg 200.00

(e) Aluminum Channel Beading RM 130.00(f) Rubber Beading RM 75.00(i) Hydraulic Floor Spring ( ISI Marked) Each 8500.00

27- Fuel wood Quintal 800.0028- Wood

(a) U.P.Teak Wood (Cut to Size) Cum 110000.00(b ) Sal wood (Cut to Size) Cum 80000.00(c) Sheesham (Cut to Size) Cum 75000.00(d) Country wood (Mango, Neem etc.) (Cut to Size) Cum 30000.00(e) Chir/Kail wood (battens & planks) Cum 55000.00(f) Salwood Chaukhat 100 x 65 single rebate including joint treatedwith fevicol properly nailed with one coat of primer, black japanpaints on wall side excluding cost of holdfast complete 100 x 65mmSingle revetted (Tolerance 3mm)

RM 550.00

(g) Salwood Chaukhat 120 x 65 single rebate including joint treatedwith fevicol properly nailed with one coat of primer, black japanpaints on wall side excluding cost of holdfast complete 120 x 65mmDouble revetted (Tolerance 3mm)

RM 700.00

29- Extra Item(1) A.C. Sheet 6mm Corrugated Sqm 250.00(1) A.C. Sheet 6mm Corrugated Sqm 250.00(2) A.C. Sheet Plain 4mm thick Sqm 170.00(3) Steel curtain rod 20mm dia R.M. 65.00(4) Steel curtain rod 25mm dia R.M. 85.00(5) Steel Curtain rod Bracket for 20mm dia Pair 90.00(6) Steel Curtain rod Bracket for 25mm dia Pair 120.00(7) Fevicol SH Kg 185.00(8) Fevicol SR Kg 310.00(9) Hetax Kg 380.00(10) Metal Putty 250gm packet Pkt 70.00(11) Dori cotton average 6mm dia Kg 105.00(12) Nails koka Kg 110.00(13) Nails Kg 80.00(14) Aluminium Sheet 26 gauge (0.5 mm Thick) Sqm 290.00(15) Aluminium Sheet 24 gauge (0.63 mm Thick) Sqm 400.00(16) Aluminium Sheet 18 gauge (1.25 mm Thick) Sqm 500.00(17) Aluminium Sheet 16 gauge (1.5 mm Thick) Sqm 550.00(18) Aluminium Sheet 14 gauge ( 2mm Thick) Sqm 650.00(19) Translucent Roofing sheet (1.2 mm Thick) Sqm 600.00(20) Sand Paper Each 11.00(21) M-Seal 100 gm Pkt 40.00(22) Teak wood beading size 20 x 45mm R.M. 65.00(23) Teak wood beading size 20 x 25mm R.M. 50.00(24) Teak wood beading size 20 x 15mm R.M. 40.00(25) White china glazed low level cistern's 10 litre capacity with allinternal fitting of P.V.C. (Parry ware, Hindware etc.) Each 2500.00

Page 14



(26) P.V.C. Low level Cistern's 10 litre capacity with all internalfitting perryware, cert, dip last, etc. Each 1300.00

(27) Internal fittings for china low level cistern's (Brass) Set 950.00(28) Internal fitting for P.V.C. low level cistern's Set 425.00(29) Anti termite treatment oil Litre 330.00(30) Bleaching powder Kg 45.00(31) White glazed china pedestal for wash basin Each 880.00(32) China white glazed automatic flushing cistern's Each 1200.00(33) C.P. Spreader for Urinals Each 450.00(34) P.V.C. pipe 110mm dia I.S.I. Marked (working presure4kg/sqcm) R.M. 275.00

(35) P.V.C. pipe 90mm dia I.S.I. Marked (working presure4kg/sqcm) R.M. 170.00



(38) P.V.C. Bend 110mm dia I.S.I. Marked Each 70.00(39) P.V.C. Bend 90mm dia I.S.I. Marked Each 60.00(40) P.V.C. Bend 75mm dia I.S.I. Marked Each 55.00(41) P.V.C. Bend 63mm dia I.S.I. Marked Each 50.00(42) P.V.C. Reducing Bend 110/90 mm dia I.S.I. Marked Each 65.00(43) P.V.C. Reducing Bend 90/63 mm dia I.S.I. Marked Each 60.00(44) P.V.C. T 110 mm dia I.S.I. Marked Each 175.00(45) P.V.C. T 90 mm dia I.S.I. Marked Each 150.00(46) P.V.C. Reducing T 110/90 mm dia I.S.I. Marked Each 125.00(47) P.V.C. Reducing T 90/63 mm dia I.S.I. Marked Each 100.00(48) P.V.C. Socket 110mm dia I.S.I. Marked Each 45.00(49) P.V.C. Socket 90mm dia I.S.I. Marked Each 35.00(50) P.V.C. Socket 63mm dia I.S.I. Marked Each 30.00(51) P.V.C. Socket 50mm dia I.S.I. Marked Each 25.00(52) P.V.C. Reducing Socket 110/90 mm dia I.S.I. Marked Each 40.00(53) P.V.C. Reducing Socket 90/63 mm dia I.S.I. Marked Each 35.00(54) P.V.C. Y Type 110 mm dia I.S.I. Marked Each 175.00(55) P.V.C. Pipe's jointing solution (Tube) 100 gm Each 25.00(56) P Trap Each 110.00(57) S Trap Each 120.00(58) Steel sink 600 x 450 x 200mm (ISI Mark) (a) Without Drainage board Each 2800.00 (b) With Drainage Board Each 3200.00(59) Stainless Steel sink with drainage Board 610x450x250mm 1mm thick (salem steel, ISO 9002) Each 4000.00

(60) Marble sink 24" x 18" x 18" Each 1500.00(61) P.V.C. Water Storage Tank Syntex or Equivalent Litre 8.00(62) Brass Spindle for C.P. Pillar Cock Each 105.00(63) Steel Pipe 20mm dia ( 304 Grade) kg 220.00(64) Steel Pipe 25mm dia ( 304 Grade) kg 220.00(65) Steel Pipe 50mm dia (304 Grade) kg 220.00(a) 125 Micron plastic sheet. Sqm 25.00(b) 125 Micron plastic sheet for bowel bars Sqm 30.00

31- Cost of Water KL 60.0032- Pre-moulded Joint filler, 25 mm thick for expansion joint Sqm 430.00

30-

Page 15



33- Joint sealant kg 180.0034- Sealant primer kg 120.0035- Curing Compound Litre 65.0036- Debonding Strip black, white RM 4.75

37-Super plasticizer admixture IS marked as per SI.9103-1999/2003

kg 65.00

38- Waste Plastic Material (IRC: SP-98-2013) kg 22.0039- Supply of RCC hume pipe NP-3 (Socket Hume Pipe)

350mm Pipe RM 1100.00450mm Pipe RM 1500.00600mm Pipe RM 1910.00900mm Pipe RM 4160.001000mm Pipe RM 4775.001200mm Pipe RM 6455.001400 mm Pipe RM 8500.00

40- Indigo kg 150.00

Note:-1

2

34

Rates of all Material as above are Inclusive of Contractor Profit except Item No. 1,2,3,9,11,12 & 135% Contractor profit on Item No. 1,2,3,9,11,12 & 13 may be given while taking the supply through some agency other than direct supplier. G.S.T is not Included in the given rates. The above rates are inclusive of octori, royality Zila parishad, Toll Tax and all other Taxes etc Complete But Excluding Forest Transit Fees.

5

67

8

9

The rates for stone ballast,grit,Cut Stone,Boulder etc. are fixed Quarries Loaded in to Trucks.The material should be peurchased from nearest approved Quarries.

Latest Cartage rates for material shall be applicable, as approved by S.E, Lucknow circle, P.W.D Lucknow.Transpotation Charges for Item No. 39 @15% Upto distance 100 km and beyond 100 km 18 % of the cost of goods.

Taxes etc Complete But Excluding Forest Transit Fees.The rates for item are No.-1,2 (Bricks & Brick Ballast) are at kiln including cartage upto 8th km. Loading unloading stacking, royality, Zila parishad,Toll Tax and all other Taxes but Excluding GST.R.M.R must be approved by competent authority.

Page 16

Sl. No. Description of Labour Unit Rate in Rs.

1- Mistri/Mason (First Class) Per Day 500.002(a)- Mason (for floor & Tiles Work) Per Day 475.002(b)- Mason (for other works) Per Day 425.003(a)- Carpenter (for skilled/furniture work) Per Day 450.003(b)- Carpenter (for other work) Per Day 425.004- Black Smith Per Day 450.005- Hammer Man Per Day 350.006- Fitter Per Day 425.007- Welder Per Day 450.008(a)- Painter (for Polishing Work) Per Day 450.008(b)- Painter (for Painting work) Per Day 420.009- Plumber (Licensed with kit) Per Day 475.0010- Helper to Plumber Per Day 330.0011- Mate/Agent/Bandhani Per Day 330.0012- Mazdoor (skilled) / Beldar / Chawkidar / Helper / Cleaner Per Day 320.0012(a)- Mazdoor (Semi Skilled) Per Day 310.0013- Coolies/Mazdoor( unskilled) Per Day 300.0014- Bhisti with Mashak Per Day 340.0015- White Washer Per Day 325.0016- Beldar for bitumen/tar work Per Day 325.0017- Two donkey with driver Per Day 800.00

CHAPTER-2Labour Rate

18- Glazier Per Day 400.0019- Floor cutting machine with operator but without grinding stone Per Day 800.0020- Tractor with trolley including P.O.L. & Driver Per Day 1600.0020(a)- Road Roller Without P.O.L. & Driver Per Day 1400.0020(b)- Road Roller With P.O.L. & Driver etc Per Day 2500.0021- Rivetter Per Day 400.00

22-Driver for Jeep / Car / Truck / Tipper / Roller , Operator for Pump / Mixol /Generator , Electrician / Wire man.

Per Day 450.00

23- Mallah Per Day 320.0024(a)- Sweeper (Full Time) Per Day 350.0024(b)- Sweeper (Part Time) Per Day 250.0025- Ameen/Tracer Per Day 400.0026- Surveyor/Draftman Per Day 550.0027- Tractor with Water Tanker with cost of water Per Day 1600.0028- Mixol Machine Complete in all respect (without P.O.L.) Per Day 1800.00

29-C.C. Mixer with Hopper, One Cement bag Capacity, with POL and OperatorComplete in all respect

Per Day 2100.00

30-Water Tanker with Sprinkler 6000 Litre or above cap.With POL/Driverincluding filling of water etc. complete. Per Day 1900.00

31- J.C.B. (Joint Cutter Bucket) Including P.O.L. and Driver Per Hour 1000.0032- Vibrator (Surface/Pin with Operator and POL Per Day 800.0033- Armed Guard from security agency. Per Day 400.0034- Cook Per Day 400.0035- Gardener Per Day 325.0036- Farras Per Day 325.0037- Waiter Per Day 325.00

Page 17

Sl. No. Description of Labour Unit Rate in Rs.

38-(a)Five door commercial vehicle with driver having taxi permit without fuel. (Jeep/Bolero)

Per Day 950.00

38- (b)Five door commercial vehicle with driver having taxi permit without fuel. (TUV/Scorpio/Innova)

Per Day 1000.00

39- Data entry Operator (without C.P) Per Month 20500.00For Bridge Work Only ;-

40- Masson (very skilled) Per Day 600.0041- Blacksmith (very skilled) Per Day 650.0042- Welder (very skilled) Per Day 600.0043- Sinker (very skilled) Per Day 600.0044- Sinking Helper (skilled) Per Day 500.0045- Labour (very skilled) Per Day 360.0046- Mate (very skilled) Per Day 600.0047- For heavy machines Per Day 750.0048- Driver for heavy machines like cranes Per Day 1050.00

mijksDr Jfed njsa dsoy vkx.ku gsrq ekU; gSA

Page 18

CHAPTER-3

CARTAGE

v/kh{k.k vfHk;Urk] y[kuÅ o`Ùk] ykss0fu0fo0] y[kuÅ ds dk;kZy; Kki la[;k4492@2,e0&,y0o`Rr@ 2018 fnukad 26-06-2018 ds vuqlkj vFkok muds }kjk le;≤ij tkjh dkVsZt dh njsa bl o`r esa Hkh ekU; gksaxhA

Page 19

Page 20

Page 21

Page 22

Sl. No.

Schedule Item

No.

Description of the Work PWD Specification

No.

Unit Over all Rate

1 251 Excavation in foundation in ordinary soil (Loam, Clay or Sand)including lift upto 1.50 m and lead upto 30m and including fillingwatering and ramming of excavated earth into the trenches or intothe space between the building and the sides of foundationtrenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer In-charge upto a distance of 30mfrom the foundation trenches.

4.1.1

Cum 135.002 252 As in Item 251 above, but excavation in soil mixed with moorum

shingle kankar requiring the use of special tools and Plants suchas pick axes subbals etc.

4.1.3

Cum 140.003 253 Earth work in cutting or in embankment in ordinary soil

excavation to be in the form of a regular pits not exceeding 0.50min depth and earth work in embankment to be in 20cm layersincluding ramming and dressing the surface to required levels andslopes and also including 1.5 m lift and 30m lead. The earth inform of cutting to be used as spoil banks within 50m distance asdirected by the Engineer-in-Charge.

-

Cum 120.004 253(a) Extra cost for Earth work in embankment mechanically compacted

to 95% proctor density In ordinary soil, excavation to be done formof regular pits not exceeding 0.5mtr in depth and work inembankment to be in 20cm layer including ramming and dressingpulverization surfacing including Supply of Labour, T&P, Rollerand water sprinkler etc.

-

Cum 30.00

CHAPTER-4EARTH WORK

Cum 30.005 253(b) Extra for Earth work in embankment mechanically compacted to

100% proctor density In ordinary soil, excavation to be done formof regular pits not exceeding 0.5mtr in depth and work inembankment to be in 20cm layer including ramming and dressingpulverization surfacing including Supply of Labour, T&P, Rollerand water sprinkler

-

Cum 35.006 253(c) Add Extra on Item No. 253 above for 1 km cartage Earth - Cum 40.007 253(d) Add Extra on Item No. 253 above for 3 km cartage Earth - Cum 75.008 253(e) Add Extra on Item No. 253 above for 5 km cartage Earth - Cum 105.009 254 Add to Item (251-252) to every additional 30m lead or part of 30m

(100ft) or for every additional 1.5m (5ft) lift or part of 1.5m (5ft)-

Cum 20.0010 255 Sand filling in plinth including supply of necessary quantity of

local sand from a distance not exceeding 8 Kms from the site ofwork and including watering dressing etc. required for propercompletion of work

4.4

Cum 1300.0011 259 Cleaning Jungles including uprooting of rank vegetation grass,

bushes, wood trees and sapling of girth upto 30cm measured at aheight of 1 meter above ground level and removal of rubbish upto adistance of 50 meters out side the periphery of area cleared.

-

Sqm 5.50

Notes-1

For new construction of widening and strengthening & Bridge works analyised Rates(MORTH/MORD) shall be applicable

Page 23

Sl. No.

DSR/ PWD SI

NoDescription of the Work

PWD/CPWD Spec. No.

Unit LABOUR RATE

Over all Rate

273 Providing and laying cement concrete in 1:6:12 (1 cement : 6Coarse sand : 12 graded stone aggregate 40mm nominalsize) including supply of all materials, labour and T&P etc.required for completion of work and curing complete,including cost of form work. In Foundation and floors.

5.4.1

Cum 1000.00 4050.00273(a) Same as above but in 40mm Brick Ballast Cum 1000.00 3550.00

274 Providing and laying cement concrete in 1:5:10 (1 Cement :5 Coarse sand : 10 graded stone aggregate 40 mm nominalsize) including supply of all materials, labour and T&P etc.required for completion of work and curing complete,including cost of form work. In Foundation and floors.

Cum 1000.00 4850.00274 (a) Same as above but in 40mm Brick Ballast Cum 1000.00 4350.00

4.1 Providing and laying cement concrete in 1:4:8 (1 Cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size)and curing complete, Including cost of form work. inFoundation and floors.

4.1.8

Cum 1000.00 5300.00

Same as above but in 40mm Brick Ballast Cum 1000.00 4450.00

CHAPTER-5

CONCRETE WORK

1-

2

3

4 4.1 Providing and laying cement concrete in 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominalsize) and curing complete, Including cost of form work. inFoundation and floors.

4.1.6

Cum 1000.00 5650.005 4.1 Providing and laying cement concrete in 1:3:6 (1 Cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)and curing complete, Including cost of form work. inFoundation and floors.

4.1.5


coarse sand : 4 graded stone aggregate 40 mm nominal size)and curing complete, Including cost of form work. InFoundation and floors.

4.1.4


coarse sand : 4 graded stone aggregate 20 mm nominal size)and curing complete, Including cost of form work.

4.1.3

Cum 1000.00 6350.008 4.1 Providing and laying cement concrete in 1:1.5:3 (1 Cement :

1.5 coarse sand : 3 graded stone aggregate 20 mm nominalsize) and curing complete, Including cost of form work.

4.1.2

Cum 1000.00 6700.009 5.1 RCC work Providing and laying in position specified grade of

reinforced cement concrete , including the cost of centering,shuttering, finishing and excluding reinforcement - All workup to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size)

5.1.3

Cum 1150.00 7600.00

Page 24

Sl. No.

DSR/ PWD SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over all Rate

10 5.1 RCC work Providing and laying in position specified grade ofreinforced cement concrete in Raft foundation, including thecost of centering, shuttering, finishing and excludingreinforcement - All work up to plinth level in :1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size)

5.1.2

Cum 1150.00 7950.0011 5.1 RCC work Providing and laying in position specified grade of

reinforced cement concrete,Slab including the cost ofcentering, shuttering, finishing and excluding reinforcement -Above plinth level upto fifth floor level in :1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominalsize)

5.1.2

Cum 1150.00 8450.00

Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers,abutments, posts andstruts etc. including cost of centering, shuttering, finishingand excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 20 mm nominal size)

5.2.2

i) upto plinth level Cum 1150.00 8150.00

ii) Above plinth level upto fifth floor lable Cum 1350.00 8800.0013 5.3 Reinforced cement concrete work in beams,lintels

suspended floors, roofs having balconies, shelves, chajjas,5.3

12 5.2

bands, staircases and spiral stair cases above plinth level upto floor five level, including the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stoneaggregate 20 mm nominal size)

Cum 1350.00 8600.00

Page 25

Sl. No.

DSR Sl.No. Description of the Work CPWD Spec.

No. Unit LABOUR RATE

Over all Rate

1 6.1 Class-150 (Non Modular) brick work in 1:6 cementand Coarse sand mortar in foundation and plinthincluding supply of all materials, labour and T&P etc.required for proper completion of the work.

6.1.2

Cum 920.00 4850.002 6.1 Class-150 (Non Modular) brick work in 1:4 cement

and Coarse sand mortar in foundation and plinthincluding supply of all materials, labour and T&P etc.required for proper completion of the work.

6.1.1

Cum 920.00 5050.003 6.1 A Class-150 (Non Modular) brick work in 1:4 cement

and Fine sand mortar including supply of allmaterials, labour and T&P etc. (Fine sand not lessthan in 1.25 FM)

6.1.1 A

Cum 920.00 4750.004 6.8 Class-150 (Non Modular) brick work in 1:3 cement

and Coarse sand mortar in foundation and plinthincluding supply of all materials, labour and T&P etc.required for proper completion of the work.

6.8

Cum 920.00 5250.005 6.8 A Add extra to Item No. 1 to 4 above for super

structure above plinth level upto floor five levelincluding necessary cutting and moulding of brickwork as required and also including honey combedbrick work in thickness of wall more than12cm.

6.8A

CHAPTER-6BRICK WORK

Cum - 400.006 6.13 Add extra to Item No. 1 to 4 above for super structure

above plinth level upto floor five level includingnecessary cutting and moulding of brick work asrequired and also including honeycombed brick workin thickness of wall 12cm and less.

6.13.1

Cum - 530.007 - Add extra to Item No. 1 to 4 above but in super

structure above plinth level upto floor five levelincluding necessary cutting and moulding of brickwork as required and also including honey combedbrick work in thickness of wall 8cm and below.

-

Cum - 570.00

Page 26

Sl. No.

DSR/PWD Sl.No. Description of the Work

PWD Spec. No.

Unit LABOUR RATE

Over all Rate

1 360 2 Cm thick D,.P.C with Cement and approvedcoarse sand 1:2 and including water proofingmaterials as approved by the Engineer in Charge inthe proprortion as specified but the manufactureincluding supply of all material, labore T&P forproper completion of he work. Including propercuring and shuttering as necessary.

-

Sqm 55.00 300.002 361 Providing and laying D.P.C 2.50 cm thick with

Cement concrete Consisting of One Part Cement1.5 part of Coarse Sand and three part of approved10 mm graded Stone grit and including waterproofing martreial as approved by the Engineer-In-Charge in the proportion as specified bymanufacturer.

-

Sqm 80.00 375.003 362 Painting on D.P.C. or Roof slab with two coats of

air blown bitumen 60/70 or 80/100 1.7Kg/Sqmapproximate including cost of fuel if any.

-

Sqm 35.00 150.004 4.10 Providing and laying damp-proof course 40 mm

thick with cement concrete 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 12.5 mmnominal size). Including supply of all materials,water proofing compound, labour T&P etc.complete.

4.1

CHAPTER-7DAMP PROOF COARSE

complete.Sqm 85.00 325.00

5 4.1.3 Providing and laying damp-proof course 25 mmthick with cement concrete 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 12.5 mmnominal size) including supply of all materials,water proofing compound, labour T&P etc.complete.

4.1.3

Sqm 80.00 220.006 4.13 Providing & applying a coat of residual petroleum

bitumen of grade VG-10 of approved quality using1.7kg per square metre on damp proof course aftercleaning the surface with brushes and finallywith piece of cloth lightly soaked in kerosene oil.

4.13

Sqm 40.00 140.00Laying of 0.50cm thick compacted layer of cut backwith approved fine sand & maxphalt 40% byweight under foundation concrete and brick workand under floor including supply of all materials,labour, shuttering and T&P etc. required for propercompletion of work as per direction of Engineer-In-Charge.

-

Sqm - 260.00(a)Same as item above but 6.25 cm. thick. - Sqm - 375.00

7 New

Page 27

Sl. No.

SCH PWD No

Description of the Work Unit LABOUR RATE Over all Rate

Antitermite treatment of along externalwall where the apron is not provided usingchemical emulsion @ 7.5 litres / sqm ofthe vertical surface of the substructureto a depth of 300 mm including excavationchannel along the wall & rodding etc.complete:

With Chlorpyriphos / Lindane E.C. 20%with 1 % concentration As per IS6313:2001

Sqm - 150.00Antitermite treatment of soil underfloors using chemical emulsion @ one litreper hole, 300 mm apart @ 100 Nos Holesper 9.00 Sqm. including drilling 12 mmdiameter holes and plugging also to matchthe floor properly :

NEW1

NEW2

CHAPTER-8ANTI TERMITE TREATMENT

With Chlorpyriphos / Lindane E.C. 20%with 1 % concentration

Sqm - 175.00

Page 28

Sl. No.

PWD/DSR SI

NoDescription of the Item

PWD/ CPWDSpeci-

fication No.

UnitLABOUR

RATE(Rs)

Over All Rate(Rs)

1 2 4 3 5 6 71 401 C.P. teak wood wrought framed and fixed including simple

mouldings, straight works as in Chaukhats, includingsupply of all materials, labour and T&P etc. required forproper completion of work. Cum 120000.00

2 402 As in Item no.-401 but for Sheesam wood Cum 90000.003 403 As in Item no.-401 but for Indian Sal wood Cum 85000.004 409 Supply and fixing of 4.5cm (1.3/4") thick C.P. Teak wood

part panelled & part glazed door and window shuttersincluding supply of wooden cleats and stops and includingfixing and adjustment of hinses, bolts, locks, handles,springs and/or other fitting but excluding their supply andincluding painting with two coats of Black Japan on alliron fittings if necessary & including fixing the glass paneswith putty & brad. Glass to be 4mm thick. Fitting withnecessary screws to be supplied departmently.

Sqm 6000.005 410 Additional cost for fixing glass panes with C.P. Teak wood

beading and felt as directed by Engineer-in-charge insteadof putty and brad including cost of all materials, labourand T&P etc. required for proper completion of work.

CHAPTER-9DOORS & WINDOWS

and T&P etc. required for proper completion of work.

Sqm 425.006 411 As in Item no.-409 above but fully panelled Sqm 6800.007 412 As in Item no.-409 above but fully glazed Sqm 5500.008 413 As in Item no.-409 above but 3.8cm thick Sqm 5000.009 414 As in Item no.-411 above but 3.8cm thick Sqm 5300.0010 415 As in Item no.-412 above but 3.8cm thick Sqm 5000.0011 422 As in Item no.-409 above but 3.8cm thick Sheesam wood

Sqm 4400.0012 423 As in Item no.-411 above but 3.8cm thick Sheesam wood

Sqm 4800.0013 424 As in Item no.-412 above but 3.8cm thick Sheesam wood

Sqm 4400.0014 New Provinding and fixing glass panes with putty and glazing

clips in steel doors, windows,clerestory windows allcomplete with : 4.0 mm thick panes.

Sqm 600.0015 450 Supply and fixing of 4cm (3/2") thick C.P. Teak wood door

and window shutters with panels of heavy qualitygalvanized iron wire gauge 2.5mm or 2mm or 1.5mm(1/10 or 1/12 or 1/6 inch) mesh or any other size withnecessary beading including supply and fixing of woodencleats and stops and including fixing and adjustment ofhinses, bolts, locks, handles, springs and/or other fittingbut excluding their supply and including painting with twocoats of Black Japan on all iron fittings if necessary.Fitting with necessary screws to be supplied departmently.

Sqm 4000.0016 451 As in Item no.-450 above but in Sheesam wood Sqm 2000.00

Page 29

Sl. No.

PWD/DSR SI


PWD/ CPWDSpeci-

fication No.

UnitLABOUR

RATE(Rs)

Over All Rate(Rs)

1 2 4 3 5 6 717 455 Supply and fixing galvanized mosquitos proof heavy

quality iron wire gauge or expended metal heavy qualityover windows and including supply of C.P. Teakwoodbatten 8cmX1cm (3"X3/8")/flat iron 25mmX4mm andincluding supply of necessary screws all materials, labour,T&P etc. required for proper completion of work.

Sqm 400.0018 455 (a) As Item No. 455 above but with fly and mosquito proof

stainless steel grade 304 wire mesh gauge with 0.50mmdia wire and 1.40mm wide aperture.

9.7.8

Sqm - 600.00

19 456 As in Item no.-455 above but with Sheesam wood battensSqm 410.00

20 456 (b) As Item No. 456 above but with fly and mosquito proofstainless steel grade 304 wire mesh gauge with 0.50mmdia wire and 1.40mm wide aperture. Sqm 510.00

21 457 As in Item no.-455 above but with Indian Sal wood battensSqm 425.00

22 457 (a) As Item No. 457 above but with fly and mosquito proofstainless steel grade 304 wire mesh gauge with 0.50mmdia wire and 1.40mm wide aperture. Sqm 535.00

23 10.29.2 Provinding and fixing fly proof wire gauze towindows,Clerestory wondows & doors with M.S flat 15x3mm and nuts & bolts complete. Stainless steel (grade 304)mm and nuts & bolts complete. Stainless steel (grade 304)wire gauze of 0.5 mm dia wire and 1.4 mm aperture inboth sides. Sqm 428.00

Supply and fixing of flush doors, commercial qualityconforming of I.S. 2202 part-1 (1983) including ISImarked oxidized iron fitting with screws, BoltHinges,Handles,Siliding bolt, Door Stopper and tower boltetc.

(A) 30mm thick Sqm 430.00 1500.00(B) 32mm thick Sqm 430.00 1550.00(C) 35mm thick Sqm 430.00 1600.00

25 473 Approximate cost of ISI marked oxidized iron fitting withscrews for doors & windows etc. (for estimating purposeonly) Sqm 500.00

26 474 As in Item no.-473 but Aluminium fittings ISI markedSqm 650.00

Providing and fixing ISI marked flush door shuttersconforming to IS : 2202 (Part I) decorative type, core ofblock board construction with frame of 1 st class hardwood and well matched teak 3 ply veneering with verticalgrains or cross bands and face veneers on both faces ofshutters.including ISI marked Stainless Steel butt hingeswith necessary screws, Steel Handels, Siliding bolt, DoorStopper and tower bolt.

(A) 35 mm thick 9.21.2 Sqm 430.00 1750.00

(b) 32 mm thick Sqm 430.00 1650.00

(c) 30 mm thick 9.21.1 Sqm 430.00 1600.00

9.2127

47024

Page 30

Sl. No.

PWD/DSR SI


PWD/ CPWDSpeci-

fication No.

UnitLABOUR

RATE(Rs)

Over All Rate(Rs)

1 2 4 3 5 6 728 9.23 Same as Itme No-22 & 25 add Extra for providing lipping

with 2nd class teak wood battens 25 mm minimum depthon all edges of flush door shutters (over all area of doorshutter to be measured).

Sqm 330.00

29 9.24 Same as Itme No-22 & 25 add Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (costof glass excluded) (overall area of door shutter to bemeasured) :Rectangular or square

9.24.1

Sqm 140.00

9.120 9.120.130 Providing and fixing factory made panel PVC door shutterconsisting of frame made out of M.S. tubes of 19 gaugethickness and size of 19 mm x 19 mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat ofsteel primers of approved make and manufacture . M.S.frame covered with 5 mm thick heat moulded PVC 'C'channel of size 30 mm thickness, 70 mm width out ofwhich 50 mm shall be flat and 20 mm shall be tapered in45 degree angle on both side forming styles and 5 mmthick, 95 mm wide PVC sheet out of which 75 mm shall beflat and 20 mm shall be tapered in 45 degree on the innerside to form top and bottom rail and 115 mm wide PVC

Sqm 1900.00

side to form top and bottom rail and 115 mm wide PVCsheet out of which 75 mm shall be flat and 20 mm shall betapered on both sides to form lock rail. and lock rails shallbe provided both side of the panel. 10 mm (5 mm x 2 )thick, 20 mm wide cross PVC sheet be provided as gapinsert for top rail & bottom rail. paneling of 5 mm thickboth side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thickx 15 mm wide PVC sheet beading on inner side, and joinedtogether with solvent cement adhesive. Top, bottom andlock rails shall be provided both sides of the panel. 10 mm(5 mm x 2 ) thick, 20 mm wide cross PVC sheet beprovided as gap insert for top rail & bottom rail. panelingof 5 mm thick both side PVC sheet to be fitted in the M.S.frame welded/ sealed to the styles & rails with 7 mm (5mm+2 mm) thick x 15 mm wide PVC sheet beading oninner side, and joined together with solvent cementadhesive. An additional 5 mm thick PVC strip of 20 mmwidth is to be stuck on the interior side of the 'C' Channelusing PVC solvent adhesive etc. complete as per directionof Engineer-in-charge, manufacturer’s specification &drawing.

Page 31

Sl. No.

PWD/DSR SI


PWD/ CPWDSpeci-

fication No.

UnitLABOUR

RATE(Rs)

Over All Rate(Rs)

1 2 4 3 5 6 731 9.127 Providing & Fixing 1.00mm thick decorative high

pressure laminated sheet of plain / wood grain in gloss /matt / suede finish with high density protective surfacelayer and reverse side of adhesive bonding quantityconforming to IS : 2046 Type S, including cost of adhesiveof approved quality.

9.127.2

Sqm 190.00 530.00

32 21.1 Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/ appropriate Z sections and othersections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. attop, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snapbeading for glazing / paneling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing, paneling anddash fasteners to be paid for separately) :For shutters ofdoors, windows & ventilators including providing andfixing hinges / pivots and making provision for fixing offittings wherever required including the cost of EPDMrubber / neoprene gasket required (Fittings shall be paidfor separately).

33 21.1.2 Anodised aluminium (anodised transparent or dyed torequired shade accordingto IS: 1868, Minimum anodic coating of grade AC 15)

21.1.2.1

Kg 370.00

34 21.1.2 Powder coated aluminium (minimum thickness of powdercoating 50 micron)

21.1.2.2Kg 400.00

Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc. withEPDM rubber / neoprene gasket etc. complete as per (Costof aluminium snap beading shall be paid in basic item):

i) With float glass panes of 4.0 mm thickness 21.3.1 Sqm 700.00

ii) With float glass panes of 5.5 mm thickness 21.3.2 Sqm 900.00

iii) With float glass panes of 8.0 mm thickness 21.3.3 Sqm 1100.00

36 21.4 Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body/ plate withdouble spring mechanism and door weight upto 125 kg,for doors including cost of cutting floors ,embeding infloors as required and making good the same matching tothe existing floor finishing and cover plates with brasspivot and single piece M.S. sheet outer box with slide plateetc. complete as per the direction of Engineer-in-Charge.With stainless steel cover plate minimum 1.25 mmthickness

21.4.1

Each 9500.00

35 21.3

Page 32

Sl. No.

PWD/DSR SI


PWD/ CPWDSpeci-

fication No.

UnitLABOUR

RATE(Rs)

Over All Rate(Rs)

1 2 4 3 5 6 737 21.18 Providing and fixing 12 mm thick frameless toughened

glass door shutter of approved brand and manufacture,including providing and fixing top & bottom pivot & springtype fixing arrangement and making necessary holes etc.for fixing required door fittings, all complete as perdirection of Engineer-in-charge (Door handle, lock andstopper etc.to be paid separately).

21.18

Sqm 3400.00

Supply and fixing of anodized aluminium door having2mm thick aluminium section excluding coating andaverage coating of 20 microns fully glazed made ofaluminium door tube size 83.5x44.65 m as verticalmember and 1140x44.45 mm size tube in bottom andhorizontal member door chaukhat should be of aluminiumtublar vertical with two openable shutter, the rate willinclude cost of material fixtures 4mm glass handles locksscrew necessary bending and excluding cost of floor springif required for proper completion of the work as perdirection of Engineer-In-Charge.

Sqm 4500.00(A) Same as above but with 5mm thick plain glass Sqm 4600.00(B) Same as above but for fixed glazing Sqm 4200.00

38 New

Page 33

Sl. No.

DSR/PWD SI No Description of the Work

PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

Mild steel and iron work of small size and section suchas holding down woods, hold fasts tierods, grating, etc.(When not included in and over all rates) brought torequired form including supply of steel and its wastageincluding cost of bolts, nuts if required for propercompletion of work including fabrication of holes indoor chaukhats and nosing.

10.21

Kg 25.00 65.00

2 503 Mild steel or iron work in heavy sizes such as built upgates record rack, roof work, gates etc. brought torequired form including drilling holes revitting orwelding where necessary, and also including supply ofsteel bolts, nuts, wastage etc. and their fixing requirefor proper completion of the work.

10.22

Kg 25.00 65.00

Mild steel or iron work in plain work such as reinforcedconcrete or reinforced brick work (When not includedin and an over all rates) brought to required shape asnecessary including bending for proper completion ofthe work and excluding the supply of steel and itswastage Bend, hooks and authorized over lapping shallbe measured upto floor to level.

CHAPTER- 10MILD STEEL AND IRON WORK

5021

3 504

(1) 6mm Qtl. 1800.00

(2) 10mm to 12mm torQtl. 1800.00

(3) 15mm to 32mm torQtl. 1800.00

NOTE:- An increase of Rs. 7.00 per floor will beallowed after floor two levels. Labour rate does notinclude cost of binding wire and other materials

4 520 Supplying and fixing rolling shutters of approved makemade of 8.25mm (3"x18 gauge) cold rolled M.S. pathinter locked through out their entire length and joinedtogether at the end by end locks and mounted onspecially designed pipe shaft with brick etc. side guidesand arrangement for inside and out side locking withpush and pull operation complete with excluding thecost of top cover and spring.

10.121

Sq.M. 2500.00

5 521 Providing and fixing 27.52 cm long wire spring grade 2for rolling shutters.

10.121Each 600.00

6 522 Providing and fixing top cover for rolling shutters madeof 18 gauge M.S. sheet.

10.16RM 650.00

7 523 Providing and fixing ball bearing for rolling shutters. 10.17Each 400.00

As per current price list from

SAIL (Excluding

GST)

Page 34

Sl. No.


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

Extra add pf S.I. No. 520 for providing mechanicaldevice, chain and crank operation for rolling shutters.

(A) Shutter above 11.2 Sq.M. (120 sft) but upto 16.8Sq.M. (180 sft) area. Sqm 1000.00

(B) Shutter above 16.80 Sq.M. (180sft) area. Sqm 1100.00

Fixing to steel or wooden chaukhats in position.(A) Door chaukhats/window chaukhats above 1.5Sq.m. and upto 5 Sq.M. Each 125.00 135.00

(B) Window chaukhats above 1.5 Sq.M. Each 90.00 100.00

(C) Ventilator chaukhats Each 55.00 75.00

(D) Staircase nosing. Each 50.00 55.00

10 513 Providing GI barbed Wire (Hot Dip) iron wire fencing inthree rows including fixing it to post after stretching itincluding labour and tools and plants etc. required forproper completion of the work also including supply ofwires (14X14 SWG) with 100mm Barb Spacing (@11.66m per Kg Wt) and excluding supply of posts.

10.7

RM 10 29.00Pressed steel chaukhatSupply of M.S. Steel 18 gauge (1.25mm) pressed steeldoor chaukhat including S/F of iron hinges of 100x3mm I.S.I. Mark with drilling holes for L-drop and pipes15x12mm cleats for tower bolt and 40x6 mm hold fast230mm long including supply of all materials labour

11

9 11.14

8 524

long including supplyT&P carriage upto site required for proper completionof work as per direction of E/IC.

(a) Section 120x50mm for double revet door chaukhatwith 12 hinges. RM 350.00

(b) Same as Item (a) above but with 6 hinges. RM 300.00

(c) Section 100x50mm for single revet door chaukhatwith 6 hinges. RM 275.00

(d) Same as Item (c) above but with 3 hinges. RM 250.00

12 10.16.1 Steel wok in built up tubular (round,square orrectangular hollow tubes etc.) truses etc. includingcutting. Hoisting fixing in position and applying apriming coat of approved steel primer, includingwelding and bolted with special shaped washers etc.complete. (Hot finised welded type tubes.

10.16.1

kg 99.00

13 10.1 Structural steel work in single section, fixed with orwithout connecting plate, including cutting, hoisting,fixing in position and applying a priming coat ofapproved steel primer all complete.

10.1

kg 65.00

14 10.1.9 Providing and fixing mild steel round holding downbolts with nuts and washer plates complete.

10.19kg 66.00

15

Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or Lhooks, bolts and nuts 8 mm dia G.I. limpet andbitumen washers complete. (0.63 mm thick with zinccoating not less than 275 gm/m²).

12.4.2

RM 508.00

Page 35

Sl. No.


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

16 New Providing and fixing stainless steel ( Grade 304)railing made of Hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing andmaking curvature (wherever required) and fitting thesame with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the flooror the side of waist slab with suitable arrangement asper approval of Engineer in-charge, ( for paymentpurpose only weight of stainless steel members shallbe considered excluding fixing accessories such asnuts, bolts, fasteners etc.).

10.28

kg 75.00 290.00

17 New Providing and fixing stainless steel ( Grade 202)railing made of Hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing andmaking curvature (wherever required) and fitting thesame with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the flooror the side of waist slab with suitable arrangement asper approval of Engineer in-charge, ( for paymentpurpose only weight of stainless steel members shallbe considered excluding fixing accessories such asnuts, bolts, fasteners etc.).

kg 75.00 190.00kg 75.00 190.00

18 New Mild Steel Iron 'Z' section windows and ventilatorsexcluding cost of glass panes of but including supply ofall materials,its fabrication, nuts and bolts, holdfast,labour and T&P required for proper completion ofwork as per direction of Engineer-in-charge and alsoincluding cost of handles,stays etc, in all respect at siteof work.

kg 25.00 75.00

19 New Mild Steel Iron 'Z' section windows and ventilatorsexcluding cost of glass panes of but including supply ofall materials,its fabrication, nuts and bolts, holdfast,labour and T&P required for proper completion ofwork as per direction of Engineer-in-charge and alsoincluding cost of handles,stays etc, in all respect at siteof work.

kg 25.00 65.00

20 New Mild Steel Iron Grill & Staircase railing of a approvedqualitiy and drawing including supply of all materials,fabrication, labour, T&P in all respect as per directionof Engineer-in-charge for proper completion of work atsite. kg 25.00 65.00

21 New Supply and fixiing ward robe shutters made of 18gauge (1.25 mm) M.S sheets including cold rolling ofrequired shape and including supply & fixing ofapproved qualitiy locks handle etc. Complete includingsupply of all material labour and T&P spray paintingetc. complete Sqm - 3000.00

Page 36

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 538 Supply and laying complete 4cm (1-1/2") thick insulation layer ofsand and clay over jack arch, reinforced brick or reinforcedcement concrete roof.

11.9

Sqm - 35.002 539 Making expansion and contraction joint in terraced roof lip type,

including supply of necessary quantity of filler, tarfelt, brick tileall material labour, tool and plants etc required for propercompletion of the work.

11.10

RM - 140.003 540 As in Item (539) above but parapet type. 11.11 RM 75.00 525.004 543 Screening overleaky roof with bitumen @ 1/2 kg per Sq.M.

including sweating, cleaning the roof with brush, heating of thepaint upto the required temperature pouring it on the surfacespreading necessary qty. of approved coarse sand @ 0.30 Cu.M.per 100 Sq.M. (1 cft per 100 sft) and including supply of allmaterial, labour, tool and plants etc. required proper completionof work.

11.12

Sqm 15.00 70.005 544 Supplying and laying one layer of tarfelt or any other equivalent

approved material at the junction of wall and roof or at any placeas per direction of E/I including necessary over lap giving onecoat of approved mastic paint below the tarfelt and includingsupply of all material labour and tools and plants etc. required forproper completion of work fixed as per standard.

11.13

CHAPTER- 11ROOF WORK

proper completion of work fixed as per standard.

Sqm 35.00 275.006 5.7.16 Providing and filling in position bitumen mixfiller of proportion

80kg of hot bitumen, 1kg of cement and 0.25 Cu.M. of coarsesand in expansion joints in width upto 2.5 cm, depth upto 15cmexcluding cost of materials but including cost of fuel.

RM 7.00 35.007 New Providing and laying "brick coba" 12mm thick laid with M-150

class brick bat coba 7.50cm thick with gap of 15mm to eachother, over 20mm thick base of cement mortar 1:4 cement andcoarse sand mixed with water proofing compound spredingcement slurry mixed with acrelic cement concrete water proofingcompound filled gaps of coba & top of coba mortar mixed withwater proofing compound in 1:4 cement and coarse sand mortarfinished smooth & top mashed false square 30cmX30cm and sidewall parapet shall be mono tythic plaster wall upto 30cm higherand junction and corner shall be rounded by brick ballast cementand coarse sand masonary coba with top finished plaster mixedwith acetic water proofing compound @ 2% by weight & includingsupply of all material, labour, T&P etc complete for propercompletion of work.

Sqm 210.00 1050.00

Page 37

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

8 12.15 Painting top of roofs with bitumen of approved quality @17kg per 10 sqm impregnated with a coat of coarse sand at 60cudm per 10 sqm, including cleaning the slab surface withbrushes and finally with a piece of cloth lightly soaked inkerosene oil complete with residual type petroleum bitumen ofgrade VG -10

12.15.1

Sqm 25.00 110.009 22.7 Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: (a) Applyinga slurry coat of neat cement using 2.75 kg/sqm of cement admixedwith water proofing compound conforming to IS. 2645 andapproved by Engineer-in-charge over the RCC slab includingadjoining walls upto 300 mm height including cleaning the surfacebefore treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5coarse sand) admixed with water proofing compound conformingto IS : 2645 and approved by Engineer-in-charge over 20 mmthick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge to required slope and treatingsimilarly the adjoining walls upto 300 mm height including roundingof junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cementslurry using 2.75 kg/ sqm of cement admixed with waterproofing compound conforming to IS : 2645 and approved byEngineer-in-charge.

22.7

Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar ofmix 1:4 (1 cement :4 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in toplayer of plaster and finally finishing the surface with trowel with neatcement slurry and making pattern of 300x300 mm square 3 mmdeep.(e) The whole terrace so finished shall be flooded with water for aminimum period of two weeks for curing and for final test.“All aboveoperations to be done in order and as directed and specified by theEngineer-in-Charge : With average thickness of 120 mm andminimum thickness at khurra as 65mm. Sqm 200.00 1000.00

Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead, including a coat of approvedsteel primer and two coats of approved paint on overlapping ofsheets complete (up to any pitch in horizontal/ vertical or curvedsurfaces), excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.

1.00 mm thick with zinc coating not less than 275 gm/m² 12.1.1 Sqm 130 1000.000.80 mm thick with zinc coating not less than 275 gm/m² 12.1.2 Sqm 130 860.000.63 mm thick with zinc coating not less than 275 gm/m² 12.1.3 Sqm 130 745.00

11 12.4 Providing ridges or hips of width 60 cm overall width plain G.S.sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. (0.63 mmthick with zinc coating not less than 275 gm/m²).

12.4.2

RM 508.00

10 12.1

Page 38

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

12 22.90 Providing and laying six courses water proofing treatment withbitumen felt over roofs consisting of first, third and fifth course ofblown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot@ 1.45, 1.20 and 1.45 Kg per square metre of area respectively,second and fourth courses of roofing felt type 3 grade Iconforming to IS : 1322 (Hessian based self finished bitumen felt), sixth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per sqm includingpreparation of surface but excluding grading, complete.

22.9

Sqm 100.00 495.0013 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane,black finished reinforced with non- woven polyester mattconsisting of a coat of bitumen primer for bitumen membrane @0.40 litre/sqm by the same membrane manufacture of density at25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over theprimer coat the layer of membrane shall be laid using ButaneTorch and sealing all joints etc, and preparing the surfacecomplete. The vital physical and chemical parameters of themembrane shall be as under : Joint strength in longitudinal andtransverse direction at 23°C as 650/ 450N/ 5cm. Tear strength inlongitudinal and transverse direction as 300/250N. Softeningpoint of membrane not less than 150°C. Cold flexibility shall beupto -2°C when tested in accordance with ASTM, D - 5147. Thelaying of membrane shall be got done through the authorisedapplicator of the manufacturer of membrane : 3 mm thick

14.91.1

Sqm 90.00 400.0014 12.22 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1m x 400 micron, finished with 12 mm cement plaster 1:3 (1cement : 3 coarse sand) and a coat of neat cement, rounding theedges and making and finishing the outlet complete.

12.22

Each 65.00 195.0015 5.28 Providing and fixing in position 12mm thick bitumen

impregnated fiber board conforming to IS: 1838, including costof primer, sealing compound Grade-A in expansion joints.

5.28

Sqm 55.00 430.0016 5.29.2 Providing and fixing sheet covering over expansion joints with iron

screws as per design. Aluminium fitted strips 3.15 mm thick. 150mm wide

5.29.2.1

RM 50.00 400.0017 12.16 10 cm thick (average) mud phaska of damped brick earth on roofs

laid to slope consolidated and plastered with 25 mm thick mudmortar mixed with bhusa @ 35 kg per cum of earth and gobrileaping with mix 1:1 (1 clay : 1 cow dung) and covered with flattile bricks, grouted with cement mortar 1:3 (1 cement : 3 finesand) mixed with 2% of integral water proofing compound byweight of cement and finished neat: With common burnt clayF.P.S.(non modular) brick tile of class designation 10

12.16.1

Sqm 200.00 550.00

Page 39

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

18 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge),including finishing with cement mortar 1:3 (1 cement : 3 finesand) as per standard design : In 75x75 mm deep chase.

12.21.1

RM 75.00 135.0019 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap forthermal expansion, (i) Single socketed pipes.110 mm diameter.

12.41.2

RM 55.00 375.00

Page 40

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 New Providing and fixing 6mm thick fiber hard board sheet liningwith but jointing and nails (Frame work and cover fillets to bemeasured and paid for separately) Sqm 65 530.00(a) Providing and fixing vineered particle board 12mm thicklining with but jointing and nails (Frame work and cover filets tobe measured and paid for separately) Sqm 115 625.00(b) 20mm thick particle board. Sqm 115 675.00

3 New Providing and decorative type veneered particle board 12mmthick lining with but jointing and nails (Frame work be paidseparately)

Sqm 115 650.004 New Providing and fixing 12mm thick plywood lining with but

jointing and nails (Frame work and cover fillets to be measuredand paid for separately) Sqm 115 990.00

5 12.31 Providing and fixing 10mm thick plaster of Paris (Gypsumanhydrous) ceiling tiles upto height of 5 meters above floor levelover fest class keil wood strips 25x6 mm with 10 mm gap inbetween and reinforce with rabbets wir mis fix to woodes freme(Frame work to be paid separetely)

Sqm 115 575.00Perforated ceiling tiles : Providing and fixing in position teakwood perforated particle board ceiling tiles bonded with B.W.P.type Phenol formaldehyde synthetic rains tile in size

CHAPTER- 12CEILING AND LINING

New2

6 New

type formaldehyde synthetic60x60x12mm over kali wood timber frame of 50x30mm sectionand suspended from the roof with the help of flat iron hangers ofsize 20x44mm on under side leaving and expansion gap of 6mmand with provision for providing necessary fighting fixturesincluding three coats of flat oil paint of approved quality andshade and a coat of pink primer/copal varnish of the side facingthe roof as per direction given by Engineer-In-Charge.

Sqm 1200.00Same as above but with decorative ceiling tiles. Sqm 1350.00Wooden Partition: Providing and fixing in position 38mm thicksingle skin partition with fibre of particle board frame of 900x400mm section of 75x38m mind fixing (Panelled type) 19mmthick teak wood particle board bounded with phenolformaldehyde synthetic resin both face commercial confirmingto ISI specification no. 3097-1980 as per drawing complete withpainting/French polish/wax polish or as per direction given byEngineer In Charge.

Sqm 1450.00Same as in Item No. 7(a) above but with 19mm thick teak woodparticle board laminated on both faces. Sqm 2750.00Providing and fixing in position double skin wooden partitionwith fiber or particle board frame of 900 x 1200mm rectangularof section 50 x 38mm covered with 12mm thick teak woodparticle board commercial quality of both face duly painted twocoats of high gloss synthetic enamel paint over on primingcomplete.

Sqm 2500.00Same as in Item No. 8(a) above but covering with 12mm thickteak wood particle board laminated on both faces. Sqm 2650.00

8

7 New

New

Page 41

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

Wall Paneling : Providing and fixing in position wall panels ofplain teak wood particle board 12mm thick bonded with B.W.P.type Phenol formaldehyde synthetic resin tiles kali wood frameand provision for providing switch board fixtures etc. as perdrawing complete with polishing and fining with Fremg waxpolish as per direction given by Engineer-In-Charge.

Sqm 1550.00Same as in Item No. 9(a) above but with one side laminatedinstead of plain board. Sqm 2050.00

551 Supply and fixing of 2.5Cm. Thick deodar wood plains, ceilingIncluding supply of beading 2.5Cm. X 4Cm. (1" x 1 ½") of deodarwood over joints but excluding cost of ceiling joints if and whennecessary but Including cost of material, labour & T&P etc.required for proper completion of the work.

Sqm 1600.00552 Same as Item No. 551 above but of C.P. teak wood. Sqm 3075.00553 As per Item No. 551 above but kail or cheer wood. Sqm 700.00

11 554 Supply and fixing A.C. Plain sheet ceiling includng beading2.5cm x 4cm (1"x1½") of deodar wood, screws, bold and allmaterial, labour, T&P etc. complete, excluding cost of ceilingjoints if any required for proper completion of work.

Sqm 90 385.0012 New Providing and fixing 12mm thick fiber hard board sheet lining

with but jointing and nails (Frame work and cover fillets to bemeasured and paid for separately)

10

New9

measured and paid for separately)Sqm 75.00 600.00

13 21.2 Providing and fixing 12 mm thick prelaminated particle boardflat pressed threelayer or graded wood particle board conformingto IS: 12823 Grade l Type ll, in panelling fixed in aluminumdoors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architecturaldrawings and directions of engineer-in-charge.Pre-laminatedparticle board with decorative lamination on one side andbalancing lamination on other side

21.2.1

Sqm 110.00 690.0014 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap forthermal expansion, (i) Single socketed pipes. 75 mm diameter.

12.41.1

Sqm - 185.00

Page 42

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

15 12.45 Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS : 277 and consisting of angle cleats of size 25 mmwide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mmcentre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed tothe angle hangers of 25x10x0.50 mm of required length with nuts &bolts of required size and other end of angle hanger fixed withintermediate G.I. channels 45x15x0.9 mm running at the spacing of1200 mm centre to centre, to which the ceiling section 0.5 mm thickbottom wedge of 80 mm with tapered flanges of 26 mm each having lipsof 10.5 mm, at 450 mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clips madeout of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partitionwith the help of rawl plugs at 450 mm centre, with 25mm long dry wallscrews @ 230 mm interval, including fixing of gypsum board to ceilingsection and perimeter channel with the help of dry wall screws of size3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flushfinish of tapered and square edges of the board with recommendedjointing compound , jointing tapes , finishing with jointing compoundin 3 layers covering upto 150 mm on both sides of joint and two coatsof primer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of theEngineer in Charge but excluding the cost of painting with :12.5 mmthick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

12.45.1

tapered edge gypsum plain conforming (Part I): 2011 (Board with BIS Certification marks)

Sqm 220.00 725.0016 12.47 Providing & fixing UV stabilised fiberglass reinforced plastic

sheet roofing up to any pitch, including fixing with polymercoated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumenwashers complete but excluding the cost of purlins, rafters,trusses etc. The sheets shall be manufactured out of 2400 TEXpanel rovigs incorporating minimum 0.3% ultra-violet stabiliserin resin system under approximately 2400 psi and hot cured.They shall be of uniform pigmentation and thickness without airpockets and shall conform to IS 10192 and IS 12866.The sheetsshall be opaque or translucent, clear or pigmented, textured orsmooth as specified.2 mm thick corrugated (2.5" or 4.2" or 6") orstep-down (2" or 3" or 6" ) as specified.

12.47.1

Sqm 70.00 880.00

Page 43

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

17 12.52 Providing and fixing tiled false ceiling of specified materials ofsize 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting ofmain "T" runner with suitably spaced joints to get requiredlength and of size 24x38 mm made from 0.30 mm thick(minimum) sheet, spaced at 1200 mm center to center and cross"T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet,1200 mm long spaced between main "T" at 600 mm center tocenter to form a grid of 1200x600 mm and secondary cross "T"of length 600 mm and size 24x25 mm made of 0.30 mm thick(minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening forservices like diffusers, grills, light fittings, fixtures, smokedetectors etc. Main "T" runners to be suspended from ceilingusing GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed toceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mmGI adjustable rods with galvanised butterfly level clips of size 85x 30 x 0.8 mm spaced at 1200 mm center to center along mainT, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as perspecifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white colortiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop;made of G I sheet having galvanizing of 100 gms/sqm (both

12.52.1

sides inclusive) and electro statically polyester powder coated ofthickness 60 microns (minimum), including factory painted afterbending.

Sqm - 1130.00Providing and fixing in wall lining medium density fibre boardIS: 14587:1998 marked, Pre-laminated one side decorativelamination and other side balancing lamination, withnecessary fixing arrangement and screws etc. complete.

12 mm thick. 9.158.1 Sqm 160.00 820.0018 mm thick. 9.158.2 Sqm 160.00 990.0025 mm thick. 9.158.3 Sqm 160.00 1350.00Providing and fixing Stainless steel curtain rod with two SSdecorative brackets fixed with SS screws and PVC sleeves etc.,wherever necessary complete :

20 mm dia - RM - 120.0025 mm dia - RM - 160.00

18 9.158

19 New

Page 44

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

20 9.105 Providing and fixing partition upto ceiling height consisting of G.I.frame and required board, including providing and fixing of frame workmade of special section power pressed/ roll form G.I. sheet with zinccoating of 120 gms/sqm(both side inclusive), consisting of floor andceiling channel 50mm wide having equal flanges of 32 mm and 0.50mm thick, fixed to the floor and ceiling at the spacing of 610 mm centreto centre with dash fastener of 12.5 mm dia meter 50 mm length orsuitable anchor fastener or metal screws with nylon plugs and thestuds 48 mm wide having one flange of 34 mm and other flange 36 mmand 0.50 mm thick fixed vertically within flanges of floor and ceilingchannel and placed at a spacing of 610 mm centre to centre by 6 mmdia bolts and nuts, including fixing of studs along both ends ofpartition fixed flush to wall with suitable anchor fastener or metalscrews with nylon plugs at spacing of 450 mm centre to centre, andfixing of boards to both side of frame work by 25 mm long dry wallscrews on studs, floor and ceiling channels at the spacing of 300 mmcentre to centre. The boards are to be fixed to the frame work withjoints staggered to avoid through cracks, Galvanised M.S. fixingchannel of 99 mm width (0.9 mm thick having two flanges of 9.5 mmeach with zinc coating of 120 gms/sqm(both side inclusive)) to beprovided at the horizontal joints of two boards, fixed to the studs usingmetal to metal flat head screws, including jointing and finishing to aflush finish with recommended jointing compound, jointing tape, anglebeads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and twocoats of primer suitable for board as per manufacture's specificationand direction of engineer in charge all complete. 75 mm overallthickness partition with 12.5 mm thick double skin fire rated GlassReinforced Gypsum (GRG), plaster board conforming to IS: 2095: (part3) 1996 (Board with BIS Certification marks)

9.105.1

Sqm 350.00 1240.0021 9.126 Providing and fixing 12 mm thick panelling or panelling and

glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (area of opening for panelinserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick. Marine plywood conforming toIS: 710

9.126.1

Sqm 400.00 1410.00

Page 45

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 13.9 12mm Cement plaster with cement mortar in proportion of1:3 cement & coarse sand of single coat for interiorplastering upto floor two level including internal roundedangles chamfers, and rounded angles not exceeding 80mmin girth and finished even and smooth.

13.9.1

Sqm 80.00 190.002 13.4 12mm Cement plaster with cement mortar in proportion of

1:4 cement & coarse sand of single coat for interiorplastering upto floor two level including internal roundedangles chamfers, and rounded angles not exceeding 80mmin girth and finished even and smooth.

13.4.1



13.4.2


1:4 cement & fine sand ( Dholpur sand) (Not less than in1.25 FM) of single coat for interior plastering upto floor twolevel including internal rounded angles chamfers, androunded angles not exceeding 80mm in girth and finished

13.1.1

PLASTER & POINTINGCHAPTER- 13

angles exceeding girtheven and smooth.


1:6 cement & fine sand ( Dholpur sand) (Not less than in1.25 FM) of single coat for interior plastering upto floor twolevel including internal rounded angles chamfers, androunded angles not exceeding 80mm in girth and finishedeven and smooth.

13.1.2



13.5


1:4 cement & coarse sand of single coat for interiorplastering upto floor two level including internal roundedangles chamfers, and rounded angles not exceeding 80mm.In girth and finished even and smooth.

13.5.1



13.5.2

Sqm 90.00 180.00

Page 46

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

9 13.2 15mm Cement plaster with cement mortar in proportion of1:4 cement & fine sand ( Dholpur sand) (Not less than in1.25 FM) of single coat for interior plastering upto floor twolevel including internal rounded angles chamfers, androunded angles not exceeding 80mm in girth and finishedeven and smooth.

13.2.1


1:6 cement & fine sand ( Dholpur sand) (Not less than in1.25 FM) of single coat for interior plastering upto floor twolevel including internal rounded angles chamfers, androunded angles not exceeding 80mm in girth and finishedeven and smooth.

13.2.2

Sqm 90.00 175.0011 13.9 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)

finished with 3mm thick floating coat of neat cement. 13.9.2



13.6.1

Sqm 100.00 260.0013 13.16 6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement &

fine sand in F.M. not less than 1.25, 1:3 including chiping ofRCC surface before ceiling plaster. The cost of including allmaterial, labour T&P and scafolding etc. complete.

13.16

material, labour T&P and scafolding etc. complete.

Sqm 90.00 145.0014 598 (1) Making grooves 10 to 12mm wide x 8mm deep in plaster of

the wall or in ceiling vertically or horizontally as required.

RM - 30.0015 598 (2) Making drip course in sunshade or FACIA as per direction

as Engineer-In-Charge including supply of all material,labour etc. required for proper completion of work.

RM - 12.00Pointing on brick work with cement mortar 1:3 (1Cement :3 Fine Sand)

(A) Flush pointing Sqm 80.00 120.00(B) Ruled pointing Sqm 85.00 130.00Pointing on brick work on eadge floor with cement mortar1:2 (1cement :2 Fine sand)

(A) Flush pointing Sqm 80.00 145.00(B) Ruled pointing Sqm 85.00 155.00Repairs to plaster of thickness 12 mm to 20 mm in patchesof area 2.5 sq. meters and under, including cutting thepatch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, includingdisposal of rubbish to the dumping ground within 50 metreslead :

(a) With cement mortar 1:4 (1 cement : 4 fine sand) (not lessthan in 1.25 FM)

14.1.1Sqm 130.00 210.00

(b) With cement mortar 1:4 (1cement: 4 coarse sand) 14.1.2 Sqm 130.00 220.00

16 571

17 578

18 14.1

Page 47

Sl. No.

PWD/DSR SI


PWD/CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

19 New Washed stone grit plaster on exterior walls height upto 10metre above ground level, in two layers, under layer 12 mmcement plaster 1:4 (1 cement : 4 coarse sand ), furrowing theunder layer with scratching tool, applying cement slurry onthe under layer @ 2 Kg of cement per square metre, toplayer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarsesand : 2 stone chipping 10 mm nominal size), in panels withgroove all around as per approved pattern, includingscrubbing and washing the top layer with brushes andwater to expose the stone chippings ,complete as perspecification and direction of Engineer-in- charge (paymentfor providing grooves shall be made separately).

Sqm 160.00 430.00

Page 48

Sl. No.

PWD/DSR SI


PWD/CPWD

Spec. No.Unit LABOUR

RATE

Over All Rate(Rs)

40mm thick marble chips flooring rubbed and polishedto granolithic finish, under layer 32mm thick cementconcrete 1:2:4 (1cement :2coarse sand: 4 12.5 gradedstone aggregates) 12.5mm top layer 8mm thick whiteor black marble chips of required size from 1mm to4mm nominal sizes laid in cement marbles powdermixed 3:1 (3cement :1marble powder by weight) inproportion of 4:7 (4 cement marble powder mix:7marble chip by volume) including fixing if glassstrips, including cost of pigments & polish excludingcost of glass strip.

A- With ordinary cement in top layer Sqm 350.00 725.00B- With white cement on top layer Sqm 350.00 750.00Same in as Item 14.1 above but under layer 25mmthick

A- With ordinary cement in top layer Sqm 340.00 700.00B- With white cement in top layer Sqm 340.00 710.0020mm thick marble chips skirting or dado rubbed andpolished to granolithic finish, under layer 14mm thickcement concrete 1:3 (1cement : 3coarse) and top layer6mm thick white black or white and black or gray or

6253

CHAPTER- 14FLOORING

1 14.1

2

6mm thick white black or white and black or gray ormixed marble chips of size from smallest to 4mmnominal size laid in cement marble powder mix 3:2(3cement portlant) : 1 marble power mixed 3:1(3cement (Portland) : 1 marble powder by weight inproportion of 4:7 (4 cement marble power mix : 7marble chops by volume) as specified or directed byEngineer-In-Charge and polished with French masonpolished for other approved polish in including curing,hire charges of cutting machine cost of all material forproper completion of work.

(A) With ordinary Portland cement 14.9.1 Sqm 360.00 525.00(B) With white cement Sqm 360.00 550.00

4 14.69 Cement concrete flooring 1:2:4 (1 cement : 2 coarsesand : 4 graded stone of size 12.5mm nominal size) laidin one layer finished with floating coat of neat cement(25mm thick floor) Sqm 130.00 300.00

5 665 Cement concrete flooring 1:2:4 (1 cement : 2 coarsesand : 4 graded stone of size 20mm nominal size) laidin one layer finished with floating coat of neat cement(40mm thick floor)

Sqm 150.00 400.00

Page 49

Sl. No.

PWD/DSR SI


PWD/CPWD


RATE

Over All Rate(Rs)

6 612 Brick on an edge floor with class-150 brick laid incement mortar consisting of one part of cement and 6part fine sand of fineness modules 1.25 and pointedwith cement mortar 1:2 over 8cm thick base concrete(pointing and base concrete to be paid separately)including supply of all material, labour and tools andplants etc. required for completion of the work.

Sqm 90.00 575.007 617 Same as Item No. 612 but bricks laid flat Sqm 80.00 445.008 615 Brick on edge floor with Class- 150 brick laid dry joints

sand fillied Including preparation of base to properslope and its ramming supply of all material, labour,T&P etc. required for proper completion of work.

Sqm 90.00 515.009 619 Same as Item No. 615 but brick laid flat Sqm 80.00 425.00

Precast terrazzo tiles 20mm thick with white, black orwhite and black marble chip of sizes upto 6mm laid infloors, treads of steps and landing on bed of 25mmaverage thickness of cement mortar 1:3 (cement :coarse sand) joined with neat cement slurry mixed withpigment to match the shade of tile including rubbingan polishing complete with precast tiles of

(a) Grey Sqm 210.00 800.00

10 14.18

(a) Grey Sqm 210.00 800.00(b) Coloured with white cement. Sqm 220.00 860.00

11 11.23 Providing and fixing 18 mm thick Granite (gang sawcut), mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters,window sills, facias and similar locations, of requiredsize, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarsesand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, includingrubbing, curing, moulding and polishing to edges togive high gloss finish etc. complete at all levels. (Slabarea upto 0.50 Sq.M.)

Sqm 3200.0012 11.23A Providing and fixing 18 mm thick Granite (gang saw

cut) mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters,window sills, facias and similar locations, of requiredsize, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarsesand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, includingrubbing, curing, moulding and polishing to edges togive high gloss finish etc. complete at all levels. (Slabarea above 0.50 Sq.M.)

11.23.4

Sqm 3550.00

Page 50

Sl. No.

PWD/DSR SI


PWD/CPWD


RATE

Over All Rate(Rs)

13 _ Providing edge maulding to 18mm thick Granite stone,including machine polishing to edge to give hige glossfinish etc. complete as per design approved byEngineer-in-Charge. RM 245.00

14 11.37 Providing and laying Ceramic glazed floor tiles of size300x300 mm (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing withgrey cement slurry @ 3.3 kg/sqm including pointingthe joints with white cement and matching pigmentetc., complete.

11.37

Sqm 230.00 675.00Marble stone flooring with 20 mm thick marble stone,as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cementmortar 1:4 (1 cement : 4 coarse sand) laid and jointedwith grey cement slurry, including rubbing andpolishing complete with :

Sqm(A) For Marble white Dhungri quality 11.23.1 Sqm - 2300.00(B) For white Alebeta White stone 11.23.1A Sqm - 2600.00

16 11.26 Kota stone slab flooring over 20 mm (average) thickbase laid over and jointed with grey cement slurry

11.26.1

11.2315

mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base ofcement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mmthick

Sqm 500.00 1250.0017 11.27 Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average) thickcement mortar 1:3 (1 cement: 3 coarse sand) andjointed with grey cement slurry mixed with pigment tomatch the shade of the slabs, including rubbing andpolishing complete.

11.27

Sqm 450.00 750.0018 11.28 40 mm thick fine dressed stone flooring over 20 mm

(average) thick base of cement mortar 1:5 (1 cement : 5coarse sand) with joints finished flush.Red sand stone

11.28.1

Sqm 225.00 610.0019 11.27 Marble Tiles stone slabs 18 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average) thickcement mortar 1:3 (1 cement: 3 coarse sand) andjointed with grey cement slurry mixed with pigment tomatch the shade of the slabs, including rubbing andpolishing complete.

11.27A

Sqm 500.00 1500.00

Page 51

Sl. No.

PWD/DSR SI


PWD/CPWD


RATE

Over All Rate(Rs)

20 11.27A Providing and laying Vitrified tiles in floor with leanconcrete of 500x 500mm sizes (thickness 10mm), witha water absorption less than 0.08% and conforming toIS:15622, of approved brand & manufacturer, indesired colours and shades, laid with cement basedhigh polymer modified quick set tile adhesive (waterbased) conforming to IS : 15477, including grouting ofjoints. including preparation of 75mm thick base withconcrete 1:4:8 Cement, Coarse sand and 40 mm B/Bcomplete as per Engineer -In -Charge.

11.41.1

Sqm 450.00 1700.0021 Same as above but for 600X600mm size. 11.41.2 Sqm 450.00 1800.0022 11.41A Providing and laying Vitrified tiles in floor without

lean concrete of 500x 500mm sizes (thickness 10mm),with water absorption less than 0.08% and conformingto IS:15622, of approved brand & manufacturer, indesired colours and shades, laid with cement basedhigh polymer modified quick set tile adhesive (waterbased) conforming to IS : 15477, including grouting ofjoints.

11.41.1 A

Sqm 380.00 1400.0023 (A) Same as above but for 600X600mm size. 11.41.2 A Sqm 380.00 1500.00

Providing and fixing glass strips of 4mm thick in jointsof floor and skirting at the time fo laying Includinglabour, T&P etc. complete in all respect.

(a) 2.2 Cm depth RM 4.00 16.00(b) 3.5 Cm depth RM 4.00 17.00

24 631

(b) 3.5 Cm depth RM 4.00 17.00(c) 2.2 Cm depth & 5mm thickness RM 4.00 17.00(d) 3.5 Cm depth & 5mm thickness RM 4.00 21.00

25 14.66 15mm cement concrete topping 1:2 (1 cement : 2aggregate of size 4.75mm and below by volume) laidover and finished monolithic with structure slab. Sqm 90.00 180.00

26 14.67 Same as item No.40 above but by monolithic with baseconcrete including fixing of glass strip as direction byEngineer-In-Charge. Sqm 100.00 190.00

27 11.2 S/F Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neatcement slurry mixed with pigment to match the shadeof tiles, including rubbing and cleaning etc. complete,on 20 mm thick bed of cement mortar 1:4 (1 cement: 4coarse sand). including preparation of 50mm thickbase with concrete 1:4:8 Cement, Coarse sand and 40mm B/B complete as per E/I

11.20.1

Sqm 210.00 1075.0028 11.2 (a) S/F Chequerred precast cement concrete tiles 22

mm thick in footpath & courtyard, jointed with neatcement slurry mixed with pigment to match the shadeof tiles, including rubbing and cleaning etc. complete,on 20 mm thick bed of cement mortar 1:4 (1 cement: 4coarse sand).

11.20.1

Sqm 190.00 790.00

Page 52

Sl. No.

PWD/DSR SI No

Description of the WorkPWD/CPWD


RATE

Over All

Rate(Rs)

New 641

Applying priming coat over new steel and other metalsurface upto 10cm. In width or girth or small notexceeding 0.10 Sq.M. area after and including preparingthe surface by thoroughly clearing oil, grease, dirt andother foreign matter and scoured with wire brushed, finesteel/wood. Scrapper, sand papering and knottingincluding cost of all materials, labour T&P etc. required forproper completion of work.

Sqm 14.00 32.0019.61 (a) Same as in item 1 above but on new wood surfaces. Sqm 14.00 35.00

2 19.29 Painting 1st coat over priming coat (but excluding cost ofpriming coat) on steel and other metal surfaces upto 10cmwidth or girth or small articles not exceeding 0.10 Sq.M. inarea with superior synthetic enamel such as Luxol 3, Higloss Apcolite, Superlac, Dulux specified brushing to giveand even shade and including the cleaning the surface ofall dirt, dust and other foreign matter sand papering andscrapping including cost of all materials, labour, tools andplants etc. required for proper completion of work.

Sqm 14.00 37.002(a) 19.73 Same as in item 2 above but on new wood surfaces. Sqm 14.00 40.00

CHAPTER- 15PAINTING & DISTEMPERING

1

3 642 Extra over item 2 and 2(a) above but for every coat ofpaint after first coat.

15.1.2Sqm 13.00 34.00

4 643 Extra over item 2 and 2(a) above but for every coat onpreviously painted old surface.

15.1.3Sqm 14.00 38.00

5 644 Same as above item 4 but with ready mixed paintconfirming to I.S. 103-1950 Sqm 14.00 45.00

6 19.2 Applying priming coat as in Item 1 above but surface over10cm. Width or girth. Sqm 14.00 37.00

7 19.5 Same as in item 5 above but on new wood surfaces Sqm 14.00 40.008 19.51 Painting first coat as in item 2(a) above surface over 10cm.

Width or girth. Sqm 14.00 40.009 19.73 Same as above in item 8 but on wood surfaces. Sqm 14.00 37.0010 283 Extra over item 8 & 9 above for every coat of paint after

first coatSqm 14.00 32.00

11 645 Same as item 10 but with ready mixed paint as per I.S.103-1950 Sqm 14.00 28.00

12 646 Same as item 8 & 9 but every coat on previously paintedold surface. Sqm 14.00 33.00

13 649 Distempering (first coat) with oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an even shade over &including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface freefrom mortar droppings and other foreign matter and alsoincluding preparing the surface even with plaster ofapproved synthetic material and sand papered smoothincluding cost of all materials.

Sqm 20.00 50.00

Page 53

Sl. No.

PWD/DSR SI No



RATE

Over All

Rate(Rs)

14 650 As in item No. 649 above but for every coat after first coatof subsequent coat. Sqm 13.00 24.00

15 652 First coat hot bitumen on new wood and wood basedsurfaces using 0.16 kg of bitumen per Sq.M. to give aneven shade including cleaning of all dirt, dust and otherforeign matter including cost of all material.

15.5.1

Sqm 9.00 17.0016 653 As in item no. 652 above but for every coat after first coat

using 0.12kg of coaltar per Sq.M.15.5.2

Sqm 8.00 13.0017 654 Applying first coat of any approved preservative on new

wood work and wood based surfaces including preparingthe surface by thoroughly cleaning oil, grease, dirt andforeign matter sand preparing and knotting including costof all materials.

Sqm 12.00 30.0018 655 As in Item no. 654 above but for every coat after first coat

or on previously treated surface. Sqm 12.00 25.0019 656 Oiling wood work with double boiled linseed oil to give an

even surface including cleaning the surface of all dirt dustand sand papered so as to produce a smooth dry and mattsurface including cost of all materials.

Sqm 7.00 13.0020 657 Removing oil paint or varnish from steel and other metal

surface of from wood based surface with paint remover ofapproved brand and manufacturer or with caustic sodaand making the surface even including cost of allmaterials.materials.

Sqm 9.00 16.0021 658 Polishing with French polish (in proportion 2 bees wax :

1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) onnew wood based surface including cleaning the surface ofall dirt dust and same papered smooth and a coat of woodfiller including cost of all material

Sqm 20.00 62.0022 659 As in item no. 658 above but polishing on previously

polished wood and wood based surface (wax polish inproportion 2 turpentine oil : 0.5 varnish by weight) Sqm 10.00 32.00

23 660 Finishing walls with water proofing cement paint ofapproved make such as Super snowcem, Durocem,Robiance, Guttucem, Supercem quality and of requiredshade on under coated wall surface (One coat) over andincluding one coat white cement primer to give and evenshade after thoroughly after brushing the surface .

Sqm 15.00 58.0024 661 Same as item no. 660 above but for each coat of

waterproof cement paint after the first coat to give an evenshade. Sqm 7.00 27.00

25 New Finishing walls with sandlex matt. Coat over a primingcoat of water proof cement paint of approved quality suchas super "Snowcem Durocem" super quality of requiredshade on undecorated wall surface to give an even shadeafter thoroughly brushing the surface to remove all dirtand remains of loose powdered material including curingthe cost of all material, labour, T&P etc. complete.

Sqm 30.00 105.00

Page 54

Sl. No.

PWD/DSR SI No



RATE

Over All

Rate(Rs)

26 662 Finishing walls with one coat of waterproof cementpaint of approved quality on previously old treated surfacewith this paint to give an even shade after thoroughlybrushing the surface to remove all dirt and remains ofloose powder material including curing and cost of allmaterials.

Sqm 12.00 37.0027 18.58 Wall painting (one coat) with plastic emulsion paint of

approved brand and manufacture on decorative wallsurface to give an even shade including thoroughlybrushing the surface clean all of dirt, grease loose piecesand prepare smooth. Sqm 20.00 100.00

28 New Extra over item no. 18.58 above and for every subsequentcoat of wall painting with plastic emulsion paint ofapproved brand and manufacturer. Sqm 13.00 68.00Sprit polish including sand paperings cleaning thesurface properly and then applying the sprit polish colourwith shining finishing supply of all labour material andT&P required for proper completion of work.

(a) New Surface Sqm 27.00 410.00(b) Old Surface Sqm 22.00 160.00

30 New Finishing walls with POP approved brand andmanufacture and of required shade on undacorated wallsurface to give even shade over including curing and cost

29 13.68

surface to give even shade over including curing and costof all material, labour, T&P etc. required for propercompletion of work.

Sqm 45.00 125.0031 New Finishing walls with Putty approved brand and

manufacture and of required shade on undacorated wallsurface to give even shade over including curing and costof all material, labour, T&P etc. required for propercompletion of work.

Sqm 48.00 135.0032 New Finishing walls with Textured exterior paint @ 3.28 Ltr.

per 10Sqm of approved brand and manufacture and ofrequired shade on undacorated wall surface to give evenshade over including curing and cost of all material,labour, T&P etc. required for proper completion of work.fortwo coat.over one coat of primer applied 2.20Ltr 10 Sqm.

Sqm 48.00 135.0033 13.48.1 Finishing walls with deluxe mulitsurface paint @ 1.25

Ltr. per 10 Sqm of approved brand and manufacture andof required shade on undacorated wall surface to give evenshade over including curing and cost of all material,labour, T&P etc. required for proper completion of work.fortwo coat.over one coat of primer applied 0.75Ltr per 10Sqm.

Sqm 32.00 90.00

Page 55

Sl. No.

PWD/DSR SI No



RATE

Over All

Rate(Rs)

34 13.60.1 Finishing walls with acrylic emulsion paint of approved brand and manufacture and of required shadeon undacorated wall surface to give even shade overincluding curing and cost of all material, labour, T&P etc.required for proper completion of work.for two coat.

Sqm 27.00 70.0035 New Finishing walls with exterior emulsion paint (Apex) of

approved brand and manufacture and of required shadeon undacorated wall surface to give even shade over @1.25 Ltr/10sqm including one coat of primer applid @0.75Ltr/10sqm coat curing and cost of all material,labour, T&P etc. required for proper completion of work.fortwo coat.

Sqm 48.00 132.00

NOTE :- If ISI mark approved brand paint is not used then the rate be deducted by minimum 10%. The consumption of material will be taken as per manufacturer recommendation. It should not be calculated from UP P.W.D. skeleton of analysis of rate.

Page 56

Sl. No.

PWD No Description of the Work

PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 671 White washing with lime on under coated wall surfaces(Two coat) to give an even shade including thoroughlybrooming the surface to remove all dirt, dust mortardrop and loose scales of lime wash and other foreignmatter.

13.38

Sqm 6.00 9.002 672 White washing with lime on undecorated wall surface

(one coat) to give an even shade including thoroughlybrooming the surface to remove all dirt, dust mortardrop and loose scales of lime wash and other foreignmatter.

13.37

Sqm 5.00 8.003 673 Extra over SI No. 672 above for every subsequent coat

of white washing Sqm 3.00 4.504 New

674Colour washing with Portland cement slurry onundercoated wall surface (one coat) to give a smoothsurface to remove all dirt, mortar drop an other foreignmatter. Sqm 5.00 10.00

5 675 Colour washing with lime on under coated wall surfaces(two coat) over & including a primary coat of whitewashing to give an even shade after thoroughlybrooming the surface to remove all dirt, dust mortardrop and other foreign matter.

13.39

Sqm 9.00 17.00

CHAPTER- 16WHITE WASHING & COLOUR WASHING

6 675 A Extra over SI No. 675 for every subsequent coat ofcolour wash on decorated surface. Sqm 3.50 7.50

7 Distempering with dry distemper of approved brand (twocoats) and of required shade on undecorated wallsurface to give an even shade over and includingpriming coat of whiting after thoroughly brushing thesurface free from dropping & other foreign matterincluding preparing the surface even and sand paperedsmooth.

Sqm 18.00 47.008 Extra over item No. 8 for every subsequent coat of

distempering with dry distemper of approved andmanufacturer. Sqm 5.00 25.00

9 682 One Coat Priming & One Coat Distempering with drydistemper of approved brand and required shade onundecorated wall surface to give an even surfaceincluding supply of all materials, labour and T&P etc.complete

Sqm 19.00 46.0010 Extra over item 11 for every subsequent coat of

distempering with dry distemper of approved andmanufacturer. Sqm 5.00 27.00

NOTE:- The rates include cost of all materials such as Plaster of Paris, whiting, glue, brushes, sand paper and other sandries etc., but exclusive as cost of specified material as mentioned in respective items in labour rates.

Page 57

Sl. No.

PWD SI No.

Description of the WorkC.P.W.D/P

.W.D. Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 691 Dismantling sundries brick work including stacking ofdismantled materials as directed by Engineer-In-Chargewithin a distance of 60 meters (200 feet).

17.3

Cum - 90.002 692 Dismantling brick work or stone work in lime or cement

mortar and including stacking of materials as directed byEngineer-In-Charge within a distance of 60 meters (200feet). Cum - 450.00

3 693 As in item (692) above but in mud mortar. 17.2.1 Cum - 240.004 694 Dismantling reinforced cement concrete or reinforced

brick work including stacking of dismantled materials asdirected by Engineer-In-Charge within a distance of 60meters (200 feet).

17.3

Cum - 950.005 695 Dismantling jack arched or wooden beam and bajra roofs

including beam and roof concrete and including stackingof dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).

17.5.1

Sqm - 125.006 696 As in item (695) above but only roof concrete. 17.4.2 Sqm - 350.007 697 Dismantling cement concrete or brick or granolithic floors

including stacking of dismantled materials as directed byEngineer-In-Charge within a distance of 60 meters (200

17.5.1

CHAPTER- 17DEMOLITION & DISMANTLING

feet). Sqm - 55.008 698 As in item (697) above but floor to be stone flagged or tiled

floor.17.5.2 Sqm - 70.00

9 699 Dismantling single tiled roof, any kind including purlinand batterns and including stacking of dismantledmaterials as directed by Engineer-In-Charge within adistance of 60 meters (20 feet). Sqm - 75.00

10 700 As in item (699) above but double tiled roof. Sqm - 115.0011 701 Dismantling corrugated iron floors wall or partition

including purlin battens and vertical support andincluding stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet)

17.7

Sqm - 45.0012 702 Dismantling of girders, trusses and other steel work

including stacking of dismantled materials as directed byEngineer-In-Charge within a distance of 60 meters (200feet).

17.8

Qtl. - 1275.0013 703 Dismantling doors and windows including stacking of

materials as directed by Engineer-In-Charge with adistance of 60 meters (200 feet).

17.9.3

Sqm - 65.0014 704 Dismantling doors and windows leaves including stacking

of materials as directed by Engineer-In-charge within adistance of 60 meters (200 feet).

19.9.1

Sqm - 30.0015 705 Dismantling doors and windows leaves including

chaukhats but excluding hold fasts and includingstacking of materials as directed by Engineer-In-Chargewithin a distance of 60 meters (200 feet)

17.9.2

Sqm - 65.00

Page 58

Sl. No.

PWD SI No.

Description of the WorkC.P.W.D/P

.W.D. Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

16 706 Dismantling existing plaster including disposal of refuseas directed by Engineer-In-Charge within a distance of 60

17.10Sqm - 35.00

17 707 Racking out joints of brick work in cement or lime mortarto depth of 1cm (3/8") including disposal of refuse asdirected by the distance of 60 meters (200 feet)

17.11

Sqm - 25.0018 708 Scrapping old white or colour wash including disposal of

refuse as directed by Engineer-In-charge within adistance of 60 meters (200 feet)

17.12

Sqm - 12.0019 New Dismentalling of B.O.E soling/Inter locking tiles Including

Stacking of servicable material and disposal ofunservicable material within a lead of 50m as perdirection of EI/C (Labour only)

-

Sqm - 10.00

Page 59

Sl. No.

PWD/DSR SI No

Description of the Work PWD/CPWD Spec. No. Unit LABOUR

RATE

Over All Rate(Rs)

1 Dholpur Stone work for wall lining etc. (Veneerwork) 40mm thick in cement mortar 1:3 (1 cement: 3 coarse sand) including camping jointing inwhite cement mortar 1:2 (1 white cement : 2 stonedust) with an admixture of pigment matching thestone shade.

-

Sqm 525.000 1150.0002 Finishing walls with sandlex matt. Coat over a

priming coat of water proof cement paint ofapproved quality such as super "SnowcemDurocem" super quality of required shade onundercoated wall surface to give an even shadeafter thoroughly brushing the surface to removeall dirt and remains of loose powdered materialincluding curing the cost of all material, labour,T&P etc. complete.

-

Sqm 28.000 100.0003 7.23 Red sand stone work for wall lining etc. (Veneer

work) 30mm thick in cement mortar 1:3 (1 cement: 3 coarse sand) including camping jointing inwhite cement mortar 1:2 (1 white cement : 2 stonedust) with an admixture of pigment matching thestone shade.

-

Sqm - 1600.000

CHAPTER- 18MARBLE WORK IN WALL LINING etc.

Sqm - 1600.000

4 7.3 30 mm red sand stone sun-shade (chisel-dressed)supported on red sand stone brackets, fixed inwalls with cement mortar 1:4 (1 cement : 4 coarsesand),including finishing complete.

-

Sqm 500.000 800.000

5 7.33 Providing and fixing Red Sand stone jali 40 mmthick throughout in cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cementmortar 1:2 (1 white cement : 2 stone dust) with anadmixture of pigment, matching the stone shade,jali slab without any chamfers etc.

-

Sqm 800.000 6100.000

6 7.6 Coursed rubble masonry (first sort) with hardstone in foundation and plinth with Cementmortar 1:4 (1 cement : 4 coarse sand)

-

Cum 1250.000 5000.000

7 7.6 Coursed rubble masonry (first sort) with hardstone in foundation and plinth with Cementmortar 1:3 (1 cement : 3 coarse sand)

-

Cum 1250.000 5100.000

8 7.8 Coursed rubble masonry (first sort) with hardstone in superstructure with Cement mortar 1:4 (1cement : 4 coarse sand)

-

Cum 1300.000 5300.000

9 7.8 Coursed rubble masonry (first sort) with hardstone in superstructure with Cement mortar 1:3 (1cement : 3 coarse sand)

-

Cum 1300.000 5500.000

Page 60

Sl. No.

SCH PWD No

Description of the WorkPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 730 Supply and fixing of 10cm. Internal dia A.C. down pipescomplete with roseheads, bends M.S. clamps 2.5cm x3mm. Fixed to wall by 15cm. Long 6mm dia nails andincluding repairs of plaster pointing etc. if damagedduring fixing of the pipes including cost of all materials,labours, tools and plant etc. required for propercompletion of work.

21.5

RM 38.00 195.00Supply and hoisting of Sintex or equivalent high densitypolyethylene seamless of piece moulded tanks and placingthe same in proper position including all taxes, labourand T&P etc. for proper completion of work. Tank shouldbe ISI marked, Sintex or equivalent.

(a) For 200 litres. - Litre 1.50 10.00(b) For 300 litres. - Litre 1.50 10.00(c ) For 500 litres. - Litre 1.50 10.00

3 Filling Bulk Bitumen from road side pits includingcleaning of pits, excavation/cutting cold bitumen, fillingthe same into empty drum, pulling out from pits toloading place and also including all labour, T&P etc.required for proper completion of work as per Direction of

-

CHAPTER- 19MISCELLANEOUS

2

required proper completion perEngineer-In-Charge. Per

Tonne - 450.00Making the opening in brick masonry includingdismantling in floor or walls by cutting masonry andmaking good the damages to walls, flooring and jambscomplete, to match existing surface i/c disposal ofmulba/ rubbish to the nearest municipal dumpingground

(a) For door/ window/ clerestory window - RM 425.005 Providing and fixing 16 mm M.S. Fan clamps of standard

shape and size in existing R.C.C. slab, including cuttingchase, anchoring clamp to reinforcement bar, includingcleaning, refilling, making good the chase with matchingconcrete, plastering and painting the exposed portion ofthe clamps complete.

-

Each - 240.006 Supply and fixing hexagonal/ Round G.P Fan Box of

approved make made up of 1.0 mm thick I.S.I marked G.PSheet spot welded four to eight holes of 25.4 mm for pipeentry of the Box. Holes Should be semi- Shuttered typewidh 0.5 mm G.P Sheet made uper and lower cover dulyScrewed Fitted widh 300 mm round zink coated M.S bar x12 mm & brand name should be embossed . Fixing withwiring conduit laid in the R.C.C Roof be four concretingalong wuth supply of all matereal, labour, T&P etc.required for proper completion of the work. As per SI No.1149

-

Each 30.00 150.00

4

Page 61

Sl. No.

SCH PWD No

Description of the WorkPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

7 Supply and laying of 25 mm dia heavey duty 2 mm thickP.V.C conduit complete with bends and other acessores asrequired in slab along with reinforcement, beforeconcreting etc complete in all respect. As per SI No. 282A

-

RM 16.00 50.008 Breking of B/B 40 mm Gauge (20 to 40mm) - Cum 120.00 -9 Breking of B/B 25 mm Gauge (20 to 25mm) - Cum 150.00 -10 Filling empty cement bag sewing and palcing in position

upto 60 mitre lead -

No. 6.0011 Surface dewatering of foundation including all

arrangement in KWH by diesel pump set. -

KWH - 40.00

Page 62

Sl. No.

SCH PWD No

ITEM No

NBODescription of the Work

PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 New Construction of Granular sub-base(GSB) by providing coarsegraded material, spreading in uniform layers with motorgrader on prepared surface, mixing by mix in place methodwith rotavator at OMC, and compacting with vibratory rollerto achieve the desired density, complete as per clause 401 ofMorth

-

Cum2 755(a) Consolidation of 45-63 mm gauge stone ballast 10cm thick

(loose) coat including reparing of patches picking up to oldsurface spreading, ballast making medhies to retain waterand carriage of metal upto 30m carriage of water upto 200mmaintenance of barriers and all labour T&P etc. required forproper completion of work The stone ballast is to be suppliedto the contractor free of cost at site.

-

Cum3 755(b) Consolidation of 22.4-53mm gauge stone ballast 10cm thick

(loose) coat including reparing of patches picking up to oldsurface spreading, ballast making medhies to retain waterand carriage of metal upto 30m carriage of water upto 200mmaintenance of barriers and all labour T&P etc. required forproper completion of work The stone ballast is to be supplied

-

CHAPTER- 20ROAD WORK

As per Morth Standard Data Book

Analysis


Analysis

As per Morth Standard Data Book to the contractor free of cost at site.

Cum4 762(a) Brick soling with straight over burnt brick laid flat and dry

brick edging on both side including preparation of subgradeto required camber and including supply of bricks, fillingjoints with local earth spreading a blind coat of 1cm(3/8")depth of local earth P.I. 5 to 7 or sand over the entire surfaceand including labour & T&P etc. required for propercompletion of work.

-

Sqm 80.00 335.005 762(b) Same as above in Item 762(a) but with laid on edge

complete.-

Sqm 90.00 435.006 763 Brick on edge pavement on patries with brick laid dry joint

filled with local sand including preparation of base to properslope & its ramming, spreading a layer of 1cm (3/8") depthof local sand over the subgrade and including supply of allmaterial, labour & T&P etc.required for proper completion ofwork with M-150 bricks.

-

Sqm 90.00 485.007 765 Brick edging on both side of the road of class M-150 bricks

8cm. (3") wide and 12cm (4½") deep laid with mud mortarincluding all labour and supply of brick finished to requiredtemplate & ramming the excavated earth as directed by theEngineer-In-Charge.

-

Km. 15000.00 70000.008 766 Stacking of road metal to the required template after

screening at road side including dressing of side berms asrequired where metal is to be stacked & including lead upto60m (200 ft) complete.

-

Cum - 55.00

Standard Data Book Analysis

Page 63

Sl. No.

SCH PWD No

ITEM No


PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

9 772(a) Scrapping old painted surface including disposal of allscrapped material to distance of 30 mts (100 ft) as directedby Engineer-In-Charge.

-

Cum10 780 Patch repair of painted Kms with tar or Bitumen (labour

only) including heating the paint to the requiredtemperature pouring it on the surface spreading ofnecessary quantity of grit and ramming hard the same withhand rammer/roller & also including cleaning with brushesetc the existing surface after scrapping it to the water boundsurface in rectangular shape and spreading the dismantledmaterial on the patries as directed by Engineer-In-charge.

-

Cum11 Cleaning Of existing painted surface and laying SDBC/

Premix over tack coat with graded approved grit andbitumen Including heating the paint to the requiredtemperature and mixing including cartage of materialmaintenance of side partries and watering them duringoperation for proper complation of work. take a length of 1/2furlong 330×12=3960sft. or 368sqm (For DeparmentalPlant Labour Rate Only).

-

Sqm12 Cleaning of Premix Surface and laying Seal Coat with

approved grit and bitumen Including heating of paint to therequired tempareture maintenance of patries and wateringthem during operation for proper completion of work. Take a

-


Analysis


Analysis


Analysis

length of 1/2 area covered 330×12=3960sft. (For Deparmental Plant Labour Rate Only)

SqmLaying and fixing of N.P.-3 Hume pipe in proper position asdirected by E/I including cartage of pipes/collars upto 30mdistance (labour only) excluding cost of pipes/collars.

(a) 30 to 45cm dia - Rm 200.00 -(b) 60 cm dia - Rm 250.00 -(c) 90 cm dia - Rm 320.00 -(d) 100 cm dia - Rm 350.00 -(e) 120 cm dia - Rm 500.00 -(f) 140 cm dia - Rm 600.00 -

14 New Consolidation of Stone Ballast in patch Repair by handrammer including patch rectangular shape Includingblinding the entire consolidated surface with local earth asdirected by EI/C.

-

Cum 150.00 -15 790(a) Supply and collection of SWG. GI Wire crate of required size

having 15cm Square mesh including all materials andlabour required for proper completion of work.

-Sqm - 120.00

16 790(b) Filling of wire-crate with boulder including loading,unloading and stacking etc. for proper completion of workIncluding lead upto 100m and lift upto 3 meter (Labour only) -

Cum 100.00 -17 790(c) Laying of Stone boulders over slopes in pitching including its

cartage to site of work from stacking site and also includinga lead upto 100m and lift upto 3m loading and unloadingetc. (Labour only)

-

Cum 250.00 -

New13


Analysis

Page 64

Sl. No.

SCH PWD No

ITEM No


PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

18 790(d) As in Item 790(b) but in apron at the toe of slope in river bed(Labour only) -

Cum 300.00 -19 790(e) Laying 40mm gauge stone/brick ballast for fiter over slopes

including dressing, leveling and ramming etc. and a leadupto 100m and lift upto 3m (labour Only)

-Cum 200.00 -

20 790(f) Providing and laying of 40 mm gauge B/B under Humepipe culvert foundation & road work including all materials,labour and T&P etc. required for completion of work. -

Cum 95.00 1300.0021 New

ItemLaying brick bats in pot holes including spreading, ramming,watering and T&P etc. required for proper completion ofwork. (Including cost of brick bats.)

-Cum 90.00 940.00

Supply & Laying of I shaped precast Interlocking tiles ofthickness 60 to 100mm (Compressive strength not lessthen 30Mpa and weight 4.50kg) Including 25mm thicklocal sand base levelling and dressing of surface to requiredlevel and slope, filling joints with local sand all completework.60 mm (Ordinary Grey) - Sqm 75.00 670.00

60 mm (Ordinary Coloured) - Sqm 75.00 715.00

60 mm (Rubber molded) - Sqm 75.00 695.00

80 mm (Ordinary Grey) - Sqm 80.00 775.00



New Item

22

100 mm (Ordinary Grey) - Sqm 85.00 935.00



23 New Item

CEMENT CONCRETE PAVEMENT(C.C ROAD) constructionof un-reinforced plain cement concrete pavement thicknessas per design, over a prepared sub base with 43 gradecement or any other type as per clause 1501.2.2 M 30(grade) (1:1.5:3) coarse and fine aggregates conforming to IS383 maximun size of coarse aggregate not exceeding 25mmmixed in a concrete mixer of not less then 0.2 cum capacityand appropriate weight batcher using approved mix design,laid in approved fixed side from work (steel channel layingand fixing of 125 micron thick plastic sheet, wedges steelplates including levelling the form work as per drawing)spreading the concrete with shovels, rakes compacted usingneedle, screed and plate vibrators and finished incontinuous opration including provision of contraction andexpansion construction joints applying debonding stripsprimer, sealant admixtures as approved curing concreteslabs for 14 days, curing compound (where specified) andwater finishing to lines and grade as per drawing andtechnical specification (approved Quarri grit)

-

cum - 7000.00

Page 65

Sl. No.

SCH PWD No

ITEM No


PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

24 New Item

Providing and laying of hot applied thermoplastic compound2.5mm thick including reflectrorising glass beeds @ 250gmsper sqm. Area, thiclness of 2.5mm is exclusive of surfaceapplied glass beeds as per IRC:35. The finish surface to belavel, uniform and free from streaks and holes. compositionof thermoplastic meterial shall be as per table 800-3 ofclause 803 of MORTH including cost of all meterial, labour,T&P etc. require for proper completion of work as directionby engineer-in-charge.

-

Sqm

-

515.0025 New

ItemProviding and laying of hot applied thermoplastic compound5mm thick including reflectrorising glass beeds @ 500gmsper sqm. Area, thiclness of 5mm is exclusive of surfaceapplied glass beeds as per IRC:35. The finish surface to belevel, uniform and free from streaks and holes. compositionof thermoplastic meterial shall be as per table 800-3 ofclause 803 of MORTH including cost of all meterial, labour,T&P etc. require for proper completion of work as directionby engineer-in-charge.

-

Sqm

-

1000.0026 Providing, laying and rolling of open-graded premix carpet of

20 mm thickness composed of 13.2 mm to 5.6 mmaggregates and using (VG-30) bitumen to required line,grade and level to serve as wearing course on a previously

-

grade and level to serve as wearing course on a previouslyprepared base, including mixing in a Mixoll, laying androlling with a three wheel 80-100 kN static roller capacity,finished to required level and grades to be followed by sealcoat as per Technical specification clauses 508.

27 Providing, laying seal coat by means with VG-10 Bitumensealing the void in a bituminous surface laid to the specifiedlevels grade cross fall using Type C as per Technicalspecification clauses 510.By Mixoll

-

28 Dismantling of flexible pavment and disposal of dismantlematerial upto a lead of 1000meters, stacking seviceable andunseviceable materials separately.

-

Cum 300.0029 Filling Bulk Bitumen from road side pits including cleaning

of pits, excavation/cutting cold bitumen, filling the sameinto empty drum, pulling out from pits to loading place andalso including all labour, T&P etc. required for propercompletion of work as per Direction of Engineer-In-Charge.

-

Per Tonne

- 400.00


Analysis

Page 66

Note : The items should be of I.S.I. Marked conforming to respective IS codes and supplied at site.

Sl. No. MATERIAL WITH CLASS SIZE UNIT

Over All Rate(Rs)

1 G.I. Pipe Class-B 15mm dia RM 90.002 G.I. Pipe Class-B 20mm dia RM 115.003 G.I. Pipe Class-B 25mm dia RM 170.004 G.I. Pipe Class-B 32mm dia RM 205.005 G.I. Pipe Class-B 40m dia RM 240.006 G.I. Pipe Class-B 50mm dia RM 290.007 G.I. Tee 15mm dia Dozen 280.008 G.I. Tee 20mm dia Dozen 440.009 G.I. Tee 25mm dia Dozen 620.0010 G.I. Tee 40mm dia Dozen 900.0011 G.I. Jamnut 15mm dia Dozen 85.0012 G.I. Jamnut 20mm dia Dozen 90.0013 G.I. Jamnut 25mm dia Dozen 145.0014 G.I. Jamnut 40mm dia Dozen 190.0015 G.I. Jamnut 50mm dia Dozen 270.0016 G.I. Elbow 15mm dia Dozen 170.0017 G.I. Elbow 20mm dia Dozen 280.0018 G.I. Elbow 25mm dia Dozen 450.0019 G.I. Elbow 40mm dia Dozen 1000.0020 G.I. Elbow 50mm dia Dozen 1500.00

WATER SUPPLY MATERIALCHAPTER- 21

21 G.I. Socket 15mm dia Dozen 170.0022 G.I. Socket 20mm dia Dozen 250.0023 G.I. Socket 25mm dia Dozen 340.0024 G.I. Socket 40mm dia Dozen 650.0025 G.I. Socket 50mm dia Dozen 1000.0026 G.I. Reducing Socket 25mm to

15mm dia Dozen300.00

27 G.I. Reducing Socket 25mm to 20mm dia Dozen

300.0028 G.I. Reducing Socket 40mm to


29 G.I. Cross Tee 15mm dia Dozen 400.0030 G.I. Cross Tee 20mm dia Dozen 550.00

G.I. Cross Tee 25 mm dia Dozen 580.0028 G.I. Reducing Socket 40mm to


29 G.I. Cross Tee 15mm dia Dozen 400.0030 G.I. Cross Tee 20mm dia Dozen 550.0031 G.I. Cross Tee 25mm dia Dozen 925.0032 G.I. Reducing Tee 25x25x15mm

dia Dozen700.00

33 G.I. Reducing Tee 20x20x15mm dia Dozen

425.0034 G.I. Reducing Tee 30x30x15mm

dia Dozen980.00

Page 67


Over All Rate(Rs)

35 G.I. Reducing Tee Class B 40x40x15mm dia Dozen

1375.0036 PVC ball float valve with brass and union complete. 15mm dia

Each180.00

37 PVC ball float valve with brass and union complete. 20mm diaEach

210.0038 PVC ball float valve with brass and union complete. 25mm dia

Each280.00

39 PVC ball float valve with brass and union complete. 30mm diaEach

360.0040 PVC ball float valve 150mm dia Each 110.0041 PVC ball float valve 200mm dia Each 115.0042 PVC ball float valve 250mm dia Each 125.0043 Brass bib cock heavy quality 15mm dia 400

gms Each210.00

43(a) Brass bib cock heavy quality 15mm dia 200 gms. Each

125.0044 Brass bib cock heavy quality 15mm dia 200

gms. Each500.00

45 Brass Stop Cock 15mm dia 200 gms. Each

130.0046 Brass Stop Cock 15mm dia 400

gms. Each200.00

47 Brass Stop Cock 20mm dia 400 Eachgms Each

285.0048 Brass bib cock heavy quality 15mm dia 200

gms. Each475.00

49 Brass Ferrule 15mm. Dia Each 120.0050 Brass Ferrule 20mm dia Each 160.0051 Brass Ferrule 25mm dia Each 180.0052 Fullway Gate Valve 15mm dia Each 360.0053 Fullway Gate Valve 20mm dia Each 460.0054 Fullway Gate Valve 25mm dia Each 650.0055 C.P. brass shower heavy quality 100mm dia Each 410.0056 B.G.I. Union 15mm dia. Each 55.0057 B.G.I. Union 20mm dia Each 90.0058 B.G.I. Union 25mm dia Each 110.0059 B.G.I. Union 32mm dia Each 135.0060 B.G.I. Union 40mm dia Each 160.0061 B.G.I. Union 50mm dia Each 215.0062 G.I. Long Screw 15 mm dia Each 60.0063 G.I. Long Screw 20 mm dia Each 75.0064 G.I. Long Screw 25 mm dia Each 95.0065 G.I. Long Screw 32 mm dia Each 110.0066 G.I. Long Screw 40 mm dia Each 120.0067 G.I. Long Screw 50 mm dia Each 150.0068 (a) G.I. Nipple 50mm Long 15 mm dia Each 11.00

(b) G.I. Nipple 50mm Long 20 mm dia Each 13.0069 (a) G.I. Nipple 75mm Long 15 mm dia Each 16.00

(b) G.I. Nipple 75mm Long 20 mm dia Each 16.00

Page 68


Over All Rate(Rs)

70 (a) G.I. Nipple 100mm Long 15 mm dia Each 25.00(b) G.I. Nipple 100mm Long 20 mm dia Each 35.00

71 Brass Ball cock complete with Ball and Brass rod 15 mm diaEach 235.00

72 Brass Ball cock complete with Ball and Brass rod 20 mm dia Each 265.0073 Brass Ball cock complete with Ball and Brass rod 25 mm dia Each 375.0074 (a) C.I. Bib cock with Brass rod heavy quality 200gms. 15 mm dia

Each85.00

(b) C.I. Bib cock with Brass rod heavy quality 200gms.

20 mm diaEach

95.0075 (a) C.I. Bib cock with Brass rod heavy quality 25 mm dia Each 105.0076 C.I. Nozzle C.I. Stop cock heavy quality 200 gm. 15 mm dia Each 50.0077 (a) C.I. Jali 100 x 100 mm

Each35.00

(b) C.I. Jali 125 x 125 mmEach

40.00(c) C.I. Jali 150 x 150 mm

Each45.00

78 (a) C.I. Jali Round 100mm dia Each 45.00(b) C.I. Jali Round 125mm dia Each 50.00(c) C.I. Jali Round 150mm dia Each 55.00

79 C.P. stop cock with Brass rod 400 gm Each 430.0080 C.P. Pillar cock with Brass spindle. 15mm dia Each 400.0081 (a) C.P. Brass waste jali for Sink Each 160.0081 (a) C.P. Brass waste jali for Sink Each 160.00

(b) C.P. Brass waste jali for Wash Basin Each 80.0082 P.V.C. waste pipe for W.H.B./Sink Each 45.0083 P.V.C. connection 450mm long with two brass units 15mm dia

Each65.00

84 P.V.C. Pipe 600mm dia long with two brass units 15mm dia Each 85.00

Page 69

Note : The items should be of I.S.I. Marked conforming to respective IS codes.

Sl. No. MATERIAL WITH CLASS UNIT

Over All Rate(Rs)

1 White glazed earthen ware (Indian type), Neycer W.C. Pan 580mm dia. Each 500.002 White glazed earthen ware Pan 580mm dia (Orissa Pan) Each 1150.003 White glazed earthen ware (Indian type) W.C. Pan510mm dia. Each 1000.004 White glazed earthen wate (European type) W.C. Pan 580mm dia. Each 2500.005 Anglo Indian W.C. Pan 450mm Each 2800.006 (a) (10 Litre) C.I. Flushing cistern complete with G.I. Pull chain but without

brackets. Each1000.00

(b) (10 Litre) C.I. Low level flushing cistern but without brackets. Each 1100.007 1 Gallon (4.5 Litre) C.I. Flushing cistern Taj or equi. Quality but with bracket and

pull chain. Each510.00

8 R.S. bracket for flushing cistern/sink and wash hand basin. Each 70.009 30mm. Telescopic flushing pipe PVC for WC with brass union. Each 180.0010 105mm dia HCI Trap HEP/equivalent. Each 275.0011 Bakelite seat covers for commode ESSLO make white. Each 600.0012 Flat back or angular front lipper urinal basin of white glazed earthen ware 465 x

355 x 265mm Each525.00

13 Squatting type urinal seats for standard size 450x350 mm Each 700.0014 Wash hand basin 550x400mm size of white glazed earthen ware

(22"X16") Each750.00

15 As above but 500 x 400mm size. Each 600.00

CHAPTER- 22SANITARY MATERIAL

16 As above but 450 x 300mm size. Each 575.0017 White glazed fire clay sink 600 x 450 x 250mm of Parry of eqviv make

(24"X18"X10") Each2350.00

18 As in item above but for 600 x 450x 200mm size (24"x18"x8") Each 2250.0019 As in item above but for 500 x 400x 150mm size (20"x16"x7") Each 1625.0020 As in item above but for 450 x 300x 150mm size (18"x12"x6") Each 920.0021 White or coloured Mossaic sink duly polished 600x450x250mm Size. Each 455.0022 As in Item above but for 500 x 350 x 150 mm size. Each 470.0023 As in Item above but for 450 x 300mm size. Each 340.0024 C.P. Brass pillar tap 15mm dia Each 60.0025 C.P. Brass chain with rubber plug Each 55.0026 C.P. waste coupling, Jamnut complete 30mm dia Each 175.0027 G.I. Chain alone for W.C. Each 40.0028 White glazed earthen ware footrest. Each 250.0029 Mirror of Atul make Indian polish of 600x450mm Size bevelled edge. Each 600.0030 Hard board sheet with clips for mirror 600x450x5mm Each 55.0031 Glass shelf 7/32" thick 600x130mm size with C.P. guard rail of standard size of

bracket Each600.00

32 C.P. brass towel rail 750x20mm together with pair of C.P. brass brackets to fit thetowel rail. Each

370.0033 C.P. brass towel rail 800x20mm together with pair of C.P. brass brackets to fit the

rowel rail Each400.00

34 C.P. brass towel rail 450x20mm together with pair of C.P. brass brackets to fit thetowel rail. Each

320.0035 HEP make HCI pipe in 1.8 metre length 150mm dia with one sod wt. 22kg. Each 1650.0036 HEP make HCI pipe with socket in 1.8 metre length 100mm dia kg. Each 1000.00

Page 70

Sl. No. MATERIAL WITH CLASS UNIT

Over All Rate(Rs)

37 As in Item above 50mm dia Each 625.0038 As in Item above 75mm dia Each 820.0039 M.S. Holder bat clamp for HCI pips 100mm dia. Each 75.0040 As in Item above but 50mm dia Each 55.0041 As in Item above but 75mm dia Each 65.0042 HCI heel rost bend 75mm dia. Each 210.0043 As in Item above but 100mm dia Each 295.0044 As in Item above but 50mm dia Each 155.0045 HCI cross with access door nuts and washer complete 100x100x100mm Each 550.0046 HEP make HCI bend with door complete 100mm dia. Each 300.0047 HEP make HCI bend with door complete 75mm dia. Each 275.0048 HEP make HCI terminal guard 150mm dia. Each 170.0049 HEP make HCI terminal guard 100mm dia. Each 155.0050 HEP make HCI terminal guard 75mm dia. Each 145.0051 HEP make HCI terminal guard 50mm dia. Each 135.0052 HEP make HCI collar socket 150mm dia. Each 310.0053 HEP make HCI collar socket 100mm dia. Each 155.0054 HEP make HCI collar socket 75mm dia. Each 135.0055 HEP make HCI terminal collar socket 50mm dia Each 110.0056 Pig lead Each 150.0057 HEP/Equi. Make HCI plain bend 100mm dia Each 275.0058 HEP/Equi. Make HCI plain bend 75mm dia Each 230.0059 HEP/Equi. Make HCI plain bend 50mm dia Each 175.0060 HEP/Equi. Make HCI plain bend door complete 50mm dia Each 450.00HEP/Equi. Make HCI plain bend door complete 50mm dia61 S.W. pipe in 600mm length prefect made 100mm dia. Each 70.0062 As in Item above 150mm dia. Each 105.0063 S.W. gully trap 150x100 mm dia. Each 300.0064 S.W. gully trap 130x100mm size Each 135.0065 HCI grating 100mm dia Each 40.0066 C.I. Cover 300x300mm. With frame complete. Kg 65.0067 HEP Nahani trap of Indian make HCI 100x75mm Each 320.00

C.I. Cover with frame 400mm. Internal dia Kg 65.00(a) C.I. Cover with frame 400mm Internal dia with weight not less 11 kgs. Kg 65.00

69 A.C. cowel 50mm dia. Each 75.00A.C. cowel 100mm dia. Each 120.00A.C. cowel 75mm dia. Each 90.00S/O C.I. Pipe 1800mm long I.S.I. Mark I.S. 1729(a) Kolkata Make Bic/Hepco 2" dia Each 610.00(b) Kolkata Make Bic/Hepco 3" dia Each 800.00(c) Kolkata Make Bic/Hepco 4" dia Each 1000.00(d) Kolkata Make Bic/Hepco 6" dia Each 1750.00(e) Neco Make C.I. Pipe 2" Dia Each 710.00(f) Neco Make C.I. Pipe 3" Dia Each 925.00(g) Neco Make C.I. Pipe 4" Dia Each 1000.00(h) Neco Make C.I. Pipe 6" Dia Each 2000.00

72 MS clamp made with 32x5mm flat iron with out nut and bold complete for CI pipe Kg 65.00

71

70

68

Page 71

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 23.1 Fixing of the following sizes of G.I. Pipe-B, classJindal/J.C.T. m with G.I. Fittings I.S.I. Marked andclamped including making good ceiling and floorincluding supply of all material, labour, T&P etcrequired for proper completion of the work.

(a) 15mm dia RM 37.00 -(b) 20mm dia RM 42.00 -(c ) 25mm dia RM 47.00 -(d) 32mm dia RM 50.00 -(e) 40mm dia RM 55.00 -(f) 50mm dia RM 60.00 -

23.7(a) S/F brass bib cock/stop cock 15mm dia I.S.I. Markedof 400gm weight including supply of all material,labour, T&P etc. and including threading the pipe ifrequired for proper completion of the work.

Each 35.00 -

23.7(b) Same as Item 2(a) above but 20mm dia. Each 37.00 -23.7(c ) Same as Item 2(a) above but 25mm dia. Each 40.00 -

3 23.99 Fixing gun metal check or non return value of all

CHAPTER- 23WATER SUPPLY

2

nominal base.

(a) 20mm dia Each 45.00 -(b) 25mm dia Each 50.00 -

4 23.01 Fixing 15mm PVC connection Heavy quality withbrass union Including supply of all material, labour,T&P etc. and for proper completion of the work.

(a) 30 cms. Length Each 25.00 -(b) 45 cms. Length Each 30.00 -

5 23.141 Fixing C.P. brass shower rose with 15mm or 20mmIntel.

(a) 100mm dia Each 45.00 -6 23.143 Fixing 600 mm x 400mm beveled edge mirror of

superior glass mounted on 6mm thick A.C. Sheet orplywood sheet and fixed it plastic sleeves withC.P.brass screw and washers.

Each 125.00 -

7 23.148 Fixing C.P. brass towel rail with C.P. brass bracketsfixed to plastic sleeves with C.P. brass screws.

(a) 610mm x 20mm Each 60.00 -(b) 750mm x 20mm Each 65.00 -

8 Fixing C.P. brass towel rail with C.P. brass bracketsfixed to wood plugs, Plastic sleeves with CP. Brassscrews.

Each 50.00 -

9 33.3 Fixing 600mm x 120mm glass shelf and guard railcomplete fix wooden flat with C.P. iron screws. Each 55.00 -

Page 72

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

10 225 Fixing 15mm dia brass ferrule including supply of allmaterials, labour and T&P and including boring andtaping the main.

Each 120.00 -

11 Same as Item (1) but for external work including earthin excavation upto required depth and filling wateringand remaining of the same the trenches after layingpipes in position for completion of the work.

(a) 15mm dia RM 35.00 -(b) 20mm dia RM 35.00 -(c ) 25mm dia RM 40.00 -(d) 32mm dia RM 45.00 -(e) 40mm dia RM 45.00 -(f) 50mm dia RM 55.00 -

12 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipesconforming to IS - 15450, U.V. stabilized with carbonblack having thermal stability for hot & cold watersupply, capable to withstand temperature up to 800C, including all special fittings of composite material(engineering plastic blend and brass inserts whereverrequired) e.g. elbows, tees, reducers, couplers &connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as perdirection of the Engineer in charge

Internal work - Exposed on wallA 1216 (16 mm OD) pipe 18.1.1 RM 55.00 205.00B 1620 (20 mm OD) pipe 18.1.2 RM 60.00 230.00C 2025 (25 mm OD) pipe 18.1.3 RM 65.00 280.00D 2532 (32 mm OD) pipe 18.1.4 RM 75.00 360.00E 3240 (40 mm OD) pipe 18.1.5 RM 90.00 555.00F 4050 (50 mm OD) pipe 18.1.6 RM 90.00 595.0013 Providing and fixing Polyethelene-Aluminium-

Polyethelene (PE-ALPE) Composite Pressure Pipesconforming to IS - 15450, U.V.stabilized with carbonblack having thermal stability for hot & cold watersupply, capable to withstand temperature up to 800C, including all special fittings of composite material(engineering plastic blend and brass inserts whereverrequired) e.g. elbows, tees, reducers, couplers &connectors etc., with clamps at 1.00 metre spacing.This includes the costs of cutting chases andincluding testing of joints complete as per direction ofthe engineer in charge.

Concealed work, including cutting chases andmaking good the wall etc.

1216 (16 mm OD) pipe 18.2.1 RM 65.00 305.001620 (20 mm OD) pipe 18.2.2 RM 65.00 340.002025 (25 mm OD) pipe 18.2.3 RM 65.00 415.002532 (32 mm OD) pipe 18.2.4 RM 65.00 505.00

Page 73

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

3 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipesconforming to IS - 15450, U.V. stabilized with carbonblack having thermal stability for hot & cold watersupply, capable to withstand temperature up to 800C, including all special fittings of composite material(engineering plastic blend and brass inserts whereverrequired) e.g. elbows, tees, reducers, couplers &connectors etc., with trenching, refilling and testing ofjoints complete as per direction of the engineer incharge.

External workA 1216 (16 mm OD) 18.3.1 RM 50.00 180.00B 1620 (20 mm OD ) 18.3.2 RM 50.00 220.00C 2025 (25 mm OD ) 18.3.3 RM 50.00 260.00D 2532 (32 mm OD ) 18.3.4 RM 50.00 335.00E 3240 (40 mm OD ) 18.3.5 RM 55.00 510.00F 4050 (50 mm OD ) 18.3.6 RM 55.00 550.0014 Providing and fixing 3 layer PP-R (Poly propylene

Random copolymer) pipes SDR 7.4, U V stabilized &anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP – R plain& brass threaded polypropylene random fittings, i/cfixing the pipe with clamps 1.00 spacing. Thisfixing the pipe with clamps at 1.00 m spacing. Thisincludes testing of joints complete as per direction ofEngineer in Charge.

Internal work - Exposed on wallA PN - 16 Pipe, 16 mm OD 18.4.1 RM 55.00 120.00B PN - 16 Pipe, 20 mm OD 18.4.2 RM 60.00 150.00C PN - 16 Pipe, 25 mm OD 18.4.3 RM 60.00 205.00D PN - 16 Pipe, 32 mm OD 18.4.4 RM 75.00 285.00E PN - 16 Pipe, 40 mm OD 18.4.5 RM 90.00 420.00F PN - 16 Pipe, 50 mm OD 18.4.6 RM 90.00 550.0015 Providing and fixing 3 layer PP-R (Poly propylene

Random copolymer) pipes SDR 7.4, U V stabilized &anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP – R plain& brass threaded polypropylene random fittings, i/cfixing the pipe with clamps at 1.00 m spacing. Thisincludes the cost of cutting chases and making goodthe same including testing of joints complete as perdirection of Engineer in Charge.

Concealed work, including cutting chases andmaking good the walls etc.,

A PN - 16 Pipe, 16 mm OD 18.5.1 RM 65.00 195.00B PN - 16 Pipe, 20 mm OD 18.5.2 RM 65.00 225.00C PN - 16 Pipe, 25 mm OD 18.5.3 RM 65.00 280.00D PN - 16 Pipe, 32 mm OD 18.5.4 RM 65.00 370.00

Page 74

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

16 Providing and fixing 3 layer PP-R (Poly propyleneRandom copolymer) pipes, U V stabilized & antimicrobial fusion welded, having thermal stability forhot & cold water supply, including all PP - R plain &brass threaded polypropylene random fittings,including trenching, refilling & testing of jointscomplete as per direction of Engineer in Charge.

External workA PN - 16 Pipe, 16 mm OD (SDR - 7.4) 18.6.1 RM 50.00 100.00B PN - 16 Pipe, 20 mm OD (SDR - 7.4) 18.6.2 RM 50.00 130.00C PN - 16 Pipe, 25 mm OD (SDR - 7.4) 18.6.3 RM 50.00 170.00D PN - 16 Pipe, 32 mm OD (SDR - 7.4) 18.6.4 RM 50.00 240.00E PN - 16 Pipe, 40 mm OD (SDR - 7.4) 18.6.5 RM 55.00 350.00F PN - 16 Pipe, 50 mm OD (SDR - 7.4) 18.6.6 RM 55.00 470.00G PN - 16 Pipe, 63 mm OD (SDR - 7.4) 18.6.7 RM 65.00 705.00H PN - 16 Pipe, 75 mm OD (SDR - 7.4) 18.6.8 RM 65.00 980.00I PN - 16 Pipe, 90 mm OD (SDR - 7.4) 18.6.9 RM 85.00 1565.00J PN - 10 Pipe, 110 mm OD (SDR - 11) 18.6.10 RM 85.00 1695.00K PN - 10 Pipe, 160 mm OD (SDR - 11) 18.6.11 RM 135.00 3465.0017 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brassthreaded fittings, including fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes &at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer inCharge.

Internal work - Exposed on wallA 16 mm nominal outer dia Pipes 18.7.1 RM 60.00 135.00B 20 mm nominal outer dia Pipes 18.7.2 RM 65.00 160.00C 25 mm nominal outer dia Pipes 18.7.3 RM 65.00 200.00D 32 mm nominal outer dia Pipes 18.7.4 RM 75.00 255.00E 40 mm nominal outer dia Pipes 18.7.5 RM 90.00 355.00F 50 mm nominal outer dia Pipes 18.7.6 RM 90.00 515.0018 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes &fittings, with one step CPVC solvent cement and thecost of cutting chases and making good the sameincluding testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, includingcutting chases and making good the wall etc.

A 16 mm nominal outer dia pipes 18.8.1 RM 55.00 230.00B 20 mm nominal outer dia pipes 18.8.2 RM 55.00 260.00C 25 mm nominal outer dia pipes 18.8.3 RM 55.00 315.00D 32 mm nominal outer dia pipes 18.8.4 RM 55.00 380.00

Page 75

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

19 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brassthreaded fittings. This includes jointing of pipes &fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction ofEngineerin-Charge. External work.

A 16 mm nominal outer dia pipes 18.9.1 RM 40.00 140.00B 20 mm nominal outer dia pipes 18.9.2 RM 45.00 155.00C 25 mm nominal outer dia pipes 18.9.3 RM 50.00 225.00D 32 mm nominal outer dia pipes 18.9.4 RM 50.00 245.00E 40 mm nominal outer dia pipes 18.9.5 RM 55.00 320.00F 50 mm nominal outer dia pipes 18.9.6 RM 55.00 495.00G 62.50 mm nominal inner dia pipes 18.9.7 RM 65.00 1365.00H 75 mm nominal inner dia pipes 18.9.8 RM 65.00 205.00I 100 mm nominal inner dia pipes 18.9.9 RM 80.00 215.00J 150 mm nominal inner dia pipes 18.9.10 RM 90.00 4815.0020 Providing and fixing G.I. pipes complete with G.I.

fittings and clamps, i/c cutting and making good thewalls etc.Internal work - Exposed on wall

A 15 mm dia nominal bore 18.10.1 RM 55.00 170.00B 20 mm dia nominal bore 18.10.2 RM 60.00 190.00C 25 mm dia nominal bore 18.10.3 RM 65.00 245.00D 32 mm dia nominal bore 18.10.4 RM 75.00 305.00E 40 mm dia nominal bore 18.10.5 RM 90.00 370.00F 50 mm dia nominal bore 18.10.6 RM 90.00 465.0021 Providing & Fixing GI pipes complete with GI fittings

and clamps including making good the walls etc.concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good thewall:

A 15 mm dia nominal bore 18.11.1 RM 50.00 260.00B 20 mm dia nominal bore 18.11.2 RM 55.00 280.0022 Providing and fixing G.I. pipes complete with G.I.

fittings including trenching and refilling etc. Externalwork.

A 15 mm dia nominal bore 18.12.1 RM 45.00 160.00B 20 mm dia nominal bore 18.12.2 RM 45.00 180.00C 25 mm dia nominal bore 18.12.3 RM 50.00 230.00D 32 mm dia nominal bore 18.12.4 RM 50.00 270.00E 40 mm dia nominal bore 18.12.5 RM 55.00 320.00F 50 mm dia nominal bore 18.12.6 RM 55.00 380.00G 65 mm dia nominal bore 18.12.7 RM 60.00 485.00H 80 mm dia nominal bore 18.12.8 RM 60.00 605.00

Page 76

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

23 Painting G.I. pipes and fittings with synthetic enamelwhite paint with two coats over a ready mixed primingcoat, both of approved quality for new work:

A 15 mm diameter pipe 18.38.1 RM 1.20 7.50B 20 mm diameter pipe 18.38.2 RM 1.20 8.50C 25 mm diameter pipe 18.38.3 RM 1.70 11.50D 32 mm diameter pipe 18.38.4 RM 1.70 12.50E 40 mm diameter pipe 18.38.5 RM 2.30 15.50F 50 mm diameter pipe 18.38.6 RM 2.30 18.5024 Providing and fixing G.I. Union in G.I. pipe including

cutting and threading the pipe and making longscrews etc. complete (New work):

A 15 mm nominal bore 18.46.1 Each 28.00 130.00B 20 mm nominal bore 18.46.2 Each 35.00 160.00C 25 mm nominal bore 18.46.3 Each 40.00 170.00D 32 mm nominal bore 18.46.4 Each 40.00 205.00E 40 mm nominal bore 18.46.5 Each 40.00 240.00F 50 mm nominal bore 18.46.6 Each 45.00 325.00G 65 mm nominal bore 18.46.7 Each 50.00 575.00H 80 mm nominal bore 18.46.8 Each 50.00 675.0025 Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :wheel of approved quality (screwed end) :

A 25 mm nominal bore 18.17.1 Each 25.00 390.00B 32 mm nominal bore 18.17.2 Each 27.00 470.00C 40 mm nominal bore 18.17.3 Each 30.00 575.00D 50 mm nominal bore 18.17.4 Each 35.00 745.00E 65 mm nominal bore 18.17.5 Each 35.00 1115.00F 80 mm nominal bore 18.17.6 Each 40.00 1920.0026 Providing and fixing ball valve (brass) of approved

quality, High or low pressure, with plastic floatscomplete :

A 15 mm nominal bore 18.18.1 Each 40.00 280.00B 20 mm nominal bore 18.18.2 Each 47.00 380.00C 25 mm nominal bore 18.18.3 Each 55.00 440.0027 Providing and fixing brass ferrule with C.I. mouth

cover including boring and tapping the main :A 15 mm nominal bore 18.20.1 Each 70.00 225.00B 20 mm nominal bore 18.20.2 Each 80.00 275.00C 25 mm nominal bore 18.20.3 Each 90.00 355.00

Page 77

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

28 Constructing masonry Chamber brick work withcommon burnt clay F.P.S.(non modular) bricks ofclass designation 150 in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I. surface box100mm top diameter, 160 mm bottom diameter and180 mm deep ( inside) with chained lid and RCC topslab 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20mm nominal size ) , i/c necessaryexcavation, foundation concrete 1:5:10 (1 cement : 5fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar :3 (1cement : 3 coarse sand) 12 mm thick, finished with afloating coat of neat cement complete as per standarddesign.

A 60x60x75 cm Inside 18.33 Each 2250.00 6300.00B 90x90x100 cm Inside 18.34 Each 3900.00 10500.00C 120x120x100 cm Inside 18.35 Each 5100.00 14000.0029 Providing and fixing G.I. Union in existing G.I. pipe

line, cutting and threading the pipe and making longscrews, including excavation, refilling the earth orcutting of wall and making good the same completewherever required :

A 15 mm nominal bore 18.47.1 Each 210.00 280.00B 20 mm nominal bore 18.47.2 Each 210.00 310.00C 25 mm nominal bore 18.47.3 Each 210.00 330.00D 32 mm nominal bore 18.47.4 Each 210.00 370.00E 40 mm nominal bore 18.47.5 Each 220.00 410.00F 50 mm nominal bore 18.47.6 Each 220.00 535.00G 65 mm nominal bore 18.47.7 Each 220.00 780.00H 80 mm nominal bore 18.47.8 Each 220.00 900.0030 Providing and fixing C.I. sluice valves (with cap)

complete with bolts, nuts, rubber insertions etc. (thetail pieces if required will be paid separately) :

A 100 mm diameterClass I 18.31.1.1 Each 240.00 3180.00Class II 18.31.1.2 Each 240.00 3570.00

B 125 mm diameterClass I 18.31.1.1 Each 240.00 3370.00Class II 18.31.1.2 Each 240.00 4100.00

C 150 mm diameterClass I 18.31.1.1 Each 240.00 4300.00Class II 18.31.1.2 Each 240.00 5000.00

D 200 mm diameterClass I 18.31.1.1 Each 280.00 7950.00Class II 18.31.1.2 Each 280.00 10700.00

Page 78

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

E 250 mm diameterClass I 18.31.1.1 Each 340.00 11200.00Class II 18.31.1.2 Each 340.00 11700.00

F 300 mm diameterClass I 18.31.1.1 Each 390.00 15250.00Class II 18.31.1.2 Each 390.00 19300.00

31 Providing and fixing uplasticised PVC connection pipewith brass unions:

A 30 cm lengthi) 15 mm nominal bore 18.21.1.1 Each 30.00 65.00ii) 20 mm nominal bore 18.21.1.2 Each 30.00 70.00

B 45 cm lengthi) 15 mm nominal bore 18.21.2.1 Each 30.00 75.00ii) 20 mm nominal bore 18.21.2.2 Each 30.00 85.00

32 Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931.

15 mm nominal bore 18.49.1 Each 45.00 440.0033 Providing and fixing C.P. brass long nose bib cock of

approved quality conforming to IS standards andweighing not less than 810 gms.

15 mm nominal bore 18.50.1 Each 45.00 455.0034 Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards andweighing not less than 690 gms.

15 mm nominal bore 18.51.1 Each 45.00 485.0035 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of

approved make conforming to IS:8931.15 mm nominal bore 18.52.1 Each 45.00 480.00

36 Providing and fixing C.P. brass angle valve for basinmixer and geyser points of

approved quality conforming to IS:893115 mm nominal bore 18.53.1 Each 50.00 505.00

37 Providing and fixing C.P. brass shower rose with 15 or20 mm inlet:

i) 100 mm diameter 18.22.1 Each 35.00 70.00ii) 50 mm diameter 18.22.2 1 Each 35.00 90.00

38 Providing and fixing G.I. pipes complete with G.I.fittings and clamps, i/c cutting and making good thewalls etc.

39 Providing and fixing brass stop cock of approvedquality:

15 mm nominal bore 18.16.1 Each 25.00 230.0020 mm nominal bore 18.16.2 Each 30.00 280.00

40 Providing and fixing Stainless Steel grating ofapproved quality and colour.

100 mm dia Each 6.50 27.00125 mm dia Each 6.50 32.00

Page 79

Sl. No.

DSR/PWD SI


PWD/CPWD

Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

41 Providing and fixing on wall face unplasticised RigidPVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.

110 mm diameter 12.41.2 RM 60.00 260.0042 Providing and fixing PVC pipe conforming to IS make

working pressure 4 Kg/SqCm incuding testing labourT&P and all complete fittings

75 mm diameter RM 50.00 210.0090 mm diameter RM 50.00 260.00110 mm diameter RM 60.00 360.00140 mm diameter RM 80.00 460.00

Page 80

Sl. No.

DSR SI No Description of the Work

CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 Providing and fixing water closet squatting pan (Indiantype W.C. pan) with 100 mm Sand Cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, includingflush pipe, manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the wallsand floors wherever required: White Vitreous chinaOrissa pattern W.C. pan of size 580x440 mm withintegral type foot rests.

17.1.1

Each 385.00 3160.00

2 Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the wallsand floors wherever required: W.C. pan with ISI markedwhite solid plastic seat and lid.

Each 400.00 4550.00

3 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings and

CHAPTER- 24SANITARY FITTING

standard pattern, including painting of fittings andbrackets,cutting and making good the walls whereverrequire:

A White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C. P. brass pillar taps

17.7.1Each 335.00 1935.00

B White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar tap

17.7.2Each 335.00 1735.00

C White Vitreous China Wash basin size 550x400 mm with apair of 15 mm C.P. brass pillar taps

17.7.3Each 335.00 1785.00

D White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P. brass pillar tap

17.7.4Each 335.00 1585.00

4 Providing and fixing white vitreous china flat back halfstall urinal of size 580x380x350 mm with white PVCautomatic flushing cistern, with fittings, standard sizeC.P. brass flush pipe, spreaders with unions and clamps(all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P.brass, including painting of fittings and cutting andmaking good the walls and floors wherever required:

A Single half stall urinal with 5 litre PVC. automatic flushingcistern

17.5.1Each 665.00 5665.00

B Range of two half stall urinals with 5 litre PVC. automaticflushing cistern

17.5.2Each 765.00 8865.00

C Range of three half stall urinals with 10 litre PVC.automatic flushing cistern

17.5.3Each 865.00 11915.00

D Range of four half stall urinals with 10 litre PVC.automatic flushing cistern

17.5.4Each 865.00 13615.00

Page 81

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

5 Providing and fixing Stainless Steel A ISI 304 (18/8)kitchen sink as per IS 13983 with C.I. brackets andstainless steel plug 40 mm, including painting of fittingsand brackets, cutting and making good the wallswherever required:

A Kitchen sink with drain boardi) 510x1040 mm bowl depth 250 mm 17.10.1.1 Each 615.00 6765.00

ii) 510x1040 mm bowl depth 225 mm 17.10.1.2 Each 615.00 6515.00

iii) 510x1040 mm bowl depth 200 mm 17.10.1.3 Each 615.00 5715.00

B Kitchen sink without drain boardi) 610x510 mm bowl depth 200 mm 17.10.2.1 Each 615.00 4015.00

ii) 610x460 mm bowl depth 200 mm 17.10.2.2 Each 615.00 3765.00

iii) 470x420 mm bowl depth 178 mm 17.10.2.3 Each 615.00 3965.00

6 Providing and fixing white vitreous china laboratory sinkwith C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste and 40 mm C.P. brass trap withnecessary C.P. brass unions complete, including paintingof fittings and brackets, cutting and making good the wallwherever required:

A Size 450x300x150 mm 17.11.1 Each 615.00 2065.00

B Size 600x450x200 mm 17.11.2 Each 615.00 2765.00

7 Providing and fixing 600x450 mm beveled edge mirror of 17.317 Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

17.31

Each 285.00 1135.00

8 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete.

A Semi rigid pipei) 32 mm dia 17.28.1.1 Each 19.00 65.00

ii) 40 mm dia 17.28.1.2 Each 19.00 75.00

B Flexible pipei) 32 mm dia Each 19.00 70.00

ii) 40 mm dia Each 19.00 80.00

9 Providing and fixing soil, waiste and vent pipes:Centrifugally cast (spun) iron socket & spigot (S&S) pipeas per IS: 3989

100 mm dia 17.35.2 RM 75.00 915.00

75 mm dia 17.35.2 RM 75.00 795.00

10 Providing and fixing bend of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nutscomplete.Sand cast iron S&S as per IS - 3989

100 mm dia 17.38.1 Each 55.00 380.00

75 mm dia 17.38.1 Each 55.00 305.00

17.28.2.1

Page 82

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

11 Providing and fixing plain bend of required degree.

Sand cast iron S&S as per IS : 3989

100 mm dia 17.39.1 Each 40.00 330.00

75 mm dia 17.39.1 Each 35.00 245.00

12 Providing and fixing trap of self cleansing design withscrewed down or hinged grating with or without vent armcomplete, including cost of cutting and making good thewalls and floors:

Sand cast iron S&S as per IS: 3989100 mm inlet and 100 mm outlet 17.60.1 Each 60.00 830.00

100 mm inlet and 75 mm outlet 17.60.1 Each 65.00 870.00

13 Providing lead caulked joints to sand castiron/centrifugally cast (spun) iron pipes and fittings ofdiameter:

100 mm 17.58.1 Each 40.00 230.00

75 mm 17.58.1 Each 35.00 200.00

14 Providing and fixing collar:Sand cast iron S&S as per IS - 3989100 mm 17.57.1 Each 40.00 365.00

75 mm 17.57.1 Each 35.00 190.00

15 Providing and fixing terminal guard:Sand cast iron S&S as per IS - 3989Sand cast iron S&S as per IS - 3989100 mm 17.56.1 Each 40.00 270.00

75 mm 17.56.2 Each 40.00 245.00

16 Providing and fixing M.S. holder-bat clamps of approveddesign to Sand Cast Iron/Cast Iron (spun) pipeembedded in and including cement concrete blocks10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size), includingcost of cutting holes and making good the walls etc. :

100 mm dia pipe 17.37.1 Each 25.00 265.00

75 mm dia pipe 17.37.2 Each 25.00 250.00

17 Providing and fixing white vitreous china flat back or wallcorner type lipped front urinal basin of 30x260x350 mmand 340x410x265 mm sizes respectively with automaticflushing cistern with standard flush pipe and C.P. brassspreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automaticflushing cistern

17.4.1 Each 665.00 2665.00

Range of two urinal basins with 5 litre white P.V.C.automatic flushing cistern

17.4.2Each 765.00 4265.00

Range of three urinal basins with 10litre white P.V.C.automatic flushing cistern

17.4.3Each 865.00 5865.00

Range of four urinal basins with 10 litre white P.V.C.automatic flushing cistern

17.4.4Each 965.00 8665.00

Page 83

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

18 Providing and fixing one piece construction white vitreouschina squatting plate with an integral longitudinalflushing pipe, white P.V.C. automatic flushing cistern,with fittings, standard size G.I. / PVC flush pipe for backand front flush with standard spreader pipes withfittings, G.I clamps and C.P. brass coupling complete,including painting of fittings and cutting and makinggood the walls and floorsetc. wherever required :

Single squatting plate with 5 litre P.V.C. automaticflushing cistern

17.6.1 Each 665.00 3065.00

Range of two squatting plates with 5 litre P.V.C.automatic flushing cistern

17.6.2Each 765.00 4565.00

Range of three squatting plates with 10 litre P.V.C.automatic flushing cistern

17.6.3Each 865.00 6065.00

Range of four squatting plates with 10 litre P.V.C.automatic flushing cistern

17.6.4Each 965.00 7065.00

19 Providing and fixing white vitreous china flat back or wallcorner type lipped front urinal basin of 430x260x350 mmor 340x410x265 mm sizes respectively.

17.23

Each 235.00 810.00

20 Providing and fixing white vitreous china squatting plateurinal with integral rim longitudinal flush pipe.

17.24Each 335.00 1210.00

21 Providing and fixing white vitreous china wash basinProviding fixingincluding making all connections but excluding the costof fittings :

Flat back wash basin of size 630x450 mm 17.25.1 Each 90.00 900.00


Angle back wash basin of size 600x480 mm 17.25.3 Each 90.00 790.00

Angle back wash basin of size 400x400 mm 17.25.4 Each 90.00 590.00


Surgeon type wash basin of size 660x460 mm 17.25.6 Each 90.00 1280.00

22 Providing and fixing 100 mm sand cast Iron grating forgully trap.

17.29Each 9.00 30.00

23 Providing and fixing mirror of superior glass (of approvedquality) and of required shape and size with plasticmoulded frame of approved make and shade with 6 mmthick hard board backing :

Circular shape 450 mm dia 17.32.1 Each 190.00 740.00

Rectangular shape 453x357 mm 17.32.2 Each 190.00 610.00

Oval shape 450x350 mm (outer dimensions) 17.32.3 Each 190.00 660.00

Rectangular shape 1500x450 mm 17.32.4 Each 190.00 1090.00

Page 84

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 19.1 Providing, laying and jointing glazed stoneware pipesclass SP-1 with stiff mixture of cement mortar in theproportion of 1:1 (1 cement : 1 fine sand) includingtesting of joints etc. complete :

(a) 100 mm diameter 19.1.1 RM 60.00 170.00

(b) 150 mm diameter 19.1.2 RM 65.00 240.00

(c) 200 mm diameter 19.1.3 RM 75.00 350.00

2 19.2 Laying cement concrete 1:5:10 in haunching S.W. pipesincluding concrete for bedding necessary form work andcuring complete.

(a) 100mm dia. 19.2.1 RM 450.00

(b) 150mm dia 19.2.2 RM 750.00

(c) 200mm dia 19.2.3 RM 800.00

3 19.4 Fixing S.W. gully trap grade "A" complete with C.I.Grating, brick masonary chamber and water tight C.I.Cover frame of 300mm x 300mm size (inside) squaremouth traps or "P" or "S" type traps.

(a) 100X150mm dia. 19.4.1.2 Each 1400.00

(b) 100X100mm dia 19.4.1.1 Each 1350.00

(c) 180X150mm dia 19.4.1.3 Each 1450.00

DRAINAGECHAPTER- 25

(c) 180X150mm dia4 19.7 Constructing brick masonry manhole in cement mortar

1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with1:2:4 mix (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size), foundation concrete1:4:8 mix (1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size), inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3 coarse sand)finished with floating coat of neat cement and makingchannels in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size)Fisnihed with a floating coat of neat cement complete asper standard design :

(a) Inside size 900 x 800mm and 500mm deep includingC.I. Cover frame.

19.7.1Each 1550.00 8000.00

(b) Inside size 1200 x 1200mm and 1.0meter deepincluding C.I. Cover frame.

19.7.2Each 1850.00 16000.00

5 19.8 Extra over Item No. 24.27 for every additional depth of0.10 metre or part there of main hole.

(a) Size 900 x 800 mm 19.8.1 RM 4500.00

(b) Size 1200 x 900mm 19.8.1 RM 5200.00

Page 85

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

6 19.30 Constructing brick masonary chamber for undergroundC.I. inspection chamber and bends with bricks incement mortar 1:4 (1 cement : 4 coarse sand) C.I. coverwith frame (light duty) 455x610 mm internaldimensions, total weight of cover with frame to be notless than 38 kg (weight of cover 23 kg and weight offrame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mmnominal size), foundation concrete 1:5:10 (1 cement : 5fine sand : 10 graded stone aggregate 40 mm nominalsize), inside plastering 12 mm thick with cement mortar1:3 (1 cement : 3 coarse sand), finished smooth with afloating coat of neat cement on walls and bed concreteetc. complete as per standard design :

(a) Inside dimensions 455x610 mm and 45 cm deep forsingle pipe line : With common burnt clay F.P.S. (nonmodular) bricks of class designation M-150

19.30.1

Each 4000.00

(b) Inside dimensions 500x700 mm and 45 cm deep forpipe line with one or two inlets : With common burntclay F.P.S. (non modular) bricks of class designation M-150

19.30.2

Each 5000.00

(c) Inside dimensions 600x 850 mm and 45 cm deep forpipe line with three or more inlets : With common burntclay F.P.S. (non modular) bricks ofclass designation M-150

19.30.3

class designation M-150 Each 5500.00

8 19.8 Extra for depth beyond 45 cm of brick masonry chamber

(a) Size 455 x 610 mm 19.8.1 RM 1200.00

(b) Size 500 x 700mm 19.8.2 RM 1300.00

(b) Size 600 x 850mm 19.8.3 RM 1400.00

10 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786, havingminimum cross section as 23 mm x 25 mm and over allminimum length 263 mm and width as 165 mm withminimum 112 mm space between protruded legs having2 mm tread on top surface by ribbing or chequeringbesides necessary and adequate anchoring projectionson tail length on 138 mm as per standard drawing andsuitable to with stand the bend test and chemicalresistance test as per pecifications and havingmanufacture's permanent identification mark to bevisible even after fixing, including fixing in manholeswith 30x20x15 cm cement concrete block 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.

19.16

Each 70.00 275.00

11 19.7 Replacement of M.S. foot rests in manholes includingdismantling concrete blocks and fixing with 20x20x10cm cement concrete blocks 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) :

With 20x20 mm square bar 19.17.1 Each 320.00

Page 86

Sl. No.


CPWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

12 2.10.1 Excavating trenches of required width for pipes, cables,etc including excavation for sockets, and dressing ofsides, ramming of bottoms, depth up to 1.5 m, includinggetting out the excavated soil, and then returning thesoil as required, in layers not exceeding 20 cm in depth,including consolidating each deposited layer byramming, watering, etc. and disposing of surplusexcavated soil as directed, within a lead of 80 m :

All kinds of soilPipes, cables etc. exceeding 80 mm dia but notexceeding 300 mm dia

2.10.1.2 Rm 190.00

13 2.10.1 Providing and fixing S.W. intercepting trap in manholeswith stiff mixture of cement mortar 1:1 (1 cement : 1 finesand) including testing of joints etc. complete :

(a) 100 mm dia 2.10.1.1 Each 270.00

(b) 150 mm dia 2.10.1.2 Each 360.00

Page 87

Sl. No.

SCH PWD No.

ITEM No

NBODesrciption of the Work

PWD Spec. No.

Unit LABOUR RATE

Over All Rate(Rs)

1 817 Painting letters upto 2.5cm size complete including supplyof all items, labour and materials and T&P etc. Each - 7.00

2 818 As in Item No. 817 but size above 2.5cm but upto 8cm Each - 10.003 819 As in Item No. 817 but size above 8cm but upto 15cm Each - 12.004 820 Repainting letters upto 2.5cm size complete including

supply of all material, labour and T&P etc. Each - 8.005 821 As in Item No. 820 but Size above 2.5cm but upto 8 cm Each - 10.006 822 As in Item No. 820 but size above 8cm upto 15cm. Each - 10.007 NS Painting border line on sign boards etc 2.5cm thick

complete item including supply of labour materials andT&P etc. RM - 10.00

8 Same as above Item No. 7 but 1cm thick RM - 8.009 Lettering and Painting with enamel paint (renewal coat)

Including cost of material, labour and T&P etc Complete.

-(a) Hectometer Stone Each - 90.00(b) Km. Stone (Ordinary) Each - 250.00(c) Km. Stone (5th) Each - 350.00

ANNUAL REPAIRSCHAPTER- 26

(c) Km. Stone (5th) Each - 350.00(d) Boundry Stone Each - 75.00

10 Painting strips as to 8.00cm wide including shadeincluding supply of all materials, labour, T&P etc. requiredfor proper completion of work. R.M. - 25.00

11 Painting strips as to 23.00cm wide including shadeincluding supply of all materials, labour, T&P etc. requiredfor proper completion of work. R.M. - 50.00

Page 88

Sl. No.

PWD No. Desrciption of the Work PWD

Spec. No. Unit LABOUR RATE

Over All Rate(Rs)

1 Supplying and instalation of delinators (Road way indicators[hazard markers, object marker) 80-100 cm. High above groundlevel, painted black and white in 15 cm. wide strips, fitted with80x100 mm rectangular or 75 mm dia circular reflectorisedpanel at the top buried of pressed into the ground andconforming to IRC:79 and the drawing.

Nos. - 1375.002 Supply and Fixing of Liner Delineator System (LDS) Panels

made of Micro Prismatic Retro Reflective Sheeting dulylaminated of thin aluminium foil to a unique corrugated shapeto provide Retro Reflection across wide range of observationsand external angles. Eatch LDS panel should be of norminallength of 33 inch and each ridge shall be approximately 0.34inch high. Each LDS panel is to be firmly on existing MSrailing MS Sections welding as and when required.

Nos. - 1270.003 Supply & Fixing of Bollard made (Single Side) out of

aluminium sheet welded poly shaped to make it monolithicpillar size 1200 mm high Bollard is having a frame 900x600mm and 600 mm dia fo fixation made out of 35x35x5 mmangle iron and from side is fully cover.

Nos. - 5550.004 Supply & Fixing of Bollard made (Double Side) out of

CHAPTER- 27Traffic Sign

4 Supply & Fixing of Bollard made (Double Side) out ofaluminium sheet welded poly shaped to make it monolithicpillar size 1200 mm high Bollard is having a frame 900x600mm and 600 mm dia fo fixation made out of 35x35x5 mmangle iron and from side is fully Cover.

Nos. - 8600.005 Suppy & Fixing of pavment Makers (Cat Eye) Type X-ASTMD-

4956-04 Avery Dennison/3-M (USA Make) consisting of ASAplastic housing fitted with tightly aderent plotting compound.The housing shall contain prismatic two glass coverd prismaticreflective face to reflect light I/C all tax. Nos. - 325.00

6 Supply & Fixing of site road studs powerful mode extra brightAluminium die cast matt finisish conforming to IS 617:1994designation 4250 sparkle solar road studs manufactured byTATA BP solar india or equivalent having high intensity 3x2Nos. flashing thorugh out night with backup of atlest 4 nonsunlight days amber or red colour all weather resistant withsuperior poly corbonate solor cell & side reflectors.

Nos. - 3150.00Providing & erecting direction and place indentification retro-reflectorised sign as per IRC-67 made of high intensity gradesheeting vide clause 801.3 fixed over aluminium sheeting 2mmthick with area nit exceeding 0.9mm Sqm. Supported in amiled single angle iron post 75x75x6 mm firmly fixed to theground by means of property designed foundation with M-15grade cement concrete 45x45x60cm. below ground level as perapproved drawing Conplete (90x90cm).

Nos. - 7800.00Madian Marker (MM) Nos. - 750.00

7

Page 89

Sl. No.

PWD No. Desrciption of the Work PWD

Spec. No. Unit LABOUR RATE

Over All Rate(Rs)

8 painting Lines dashes, arrows, etc.on roads in two coats onnew work with ready mixed road marking paint conforming toIS:164 on bituminous surface including cleaning the surfaceall dirt, dust and other forein matter,demarcation at site andtraffic control.

Nos. - 80.0011 Traffic Cone-Providing of red fluorescent with white reflecticve

sleeve traffic cone made of low density polyethylene (LDPE)material with a square base of 390x390x35 mm and a heightof 770 mm, kg in weight,placed at 1.5 m interval all as perBS:873. of Mord item no.10.17

Each - 575.00

Page 90

Sl. No. ITEM Unit Cement

BagW.Lime Cu.M

Surkhi Cu.M

Fine San Cu.M

C.Sand Cum.

Ist. Class Brick

Grit Cu.M

B.Ball Cu.M

1 2 3 4 5 6 7 8 9 10 11

1M-150 B.W in 1:3 lime and surkhi Cum - 0.08 0.24 - - 460 - -

2Cement concrete 1:5:10

Cum 2.83 - - 0.5 - - - 1.00

32 Cm. thick D.P.C 1:2 Cement and coarse sand

Sqm 0.27 - - - 0.02 - - -

4

Same as item 3 above but 2.5 cm thick C.C 1:1.5 :3 cement & Coarse sand 10 mm grit.

Sqm 0.22 - - - 0.27 - 0.023 -

5R.B Lintel & Railling in 1:3 Cement and Coarse sand.

Cum 3.74 0.33 424 - -

Bricks Class-150 work in Cement and sand mortar. 1:3 Cum 2.48 - - 0.27 - 460 - -

1:4 Cum 1.86 - - 0.27 - 460 - -1:5 Cum 1.57 - - 0.27 - 460 - -1:6 Cum 1.26 - - 0.27 - 460 - -

7 12 mm thick cement Plastering

1:2 Sqm 0.228 - - 0.015 - - - -1:3 Sqm 0.152 - - 0.015 - - - -1:4 Sqm 0.114 - - 0.015 - - - -1:5 Sqm 0.091 - - 0.015 - - - -1:6 Sqm 0.076 - - 0.015 - - - -

820 mm thick plaster in poloshed dado or skirting 1:2

Sqm 0.242 - - - 0.018 - - -

9C.C Floor 1:2:4 Plain 4 cm thick without base concrete.

Sqm 0.296 - - - 0.02 - 0.04 -

10C.C Floor 1:2:4 Plain 2.5 cm thick without base concrete.

Sqm 0.219 - - - 0.011 - 0.023 -

11Lime concrete 2.5 cm gauge 100:18:36 in roof terrracing.

Cum - 0.18 0.36 - - - - 1.00

12White washing per coats Sqm - 0.11 - - - - - -

13Lime concrete foundation in 100:16:32

Cum - 0.15 0.3 - - - - 1.00

6

NORMS FOR CONSUMPTION OF MATERIALS FOR BUILDING WORKS

Page 91

Sl. No. ITEM Unit Cement

BagW.Lime Cu.M

Surkhi Cu.M

Fine San Cu.M

C.Sand Cum.

Ist. Class Brick

Grit Cu.M

B.Ball Cu.M

14Struck pointing with 1:2 Cement and finne sand.

Sqm 0.045 - - 0.003 - - - -

15 Cement Wash Sqm 0.013 - - - - - - -Plaster 1:6 Cement & fine sand :-

A. 12 mm thick Sqm 0.063 - - 0.013 - - - - B. 15 mm thick Sqm 0.095 - - 0.019 - - - -

17 C.C 1:3:6 Cum 4.49 - - - 0.465 0.92 -18 C.C 1:6:12 Cum 2.26 - - 0.48 - - 1.00 -19 C.C 1:4:8 Cum 3.44 - - 0.48 - - 0.94 -20 R.C.C 1:2:4 Cum 6.66 - - - 0.45 - 0.90 -21 R.C.C 1:1.5:3 Cum 8.66 - - - 0.425 - 0.85 -

16

Page 92

s.o.r 2020(1) pdf · unit rate in rs. materials pwd spec. no. schedule item no. 12-fine sand fm...

Documents