sony hcd-bx20i,bx50ti sm
TRANSCRIPT
SERVICE MANUAL
Sony CorporationAudio Business GroupPublished by Sony Techno Create Corporation
HCD-BX20i/BX50BTi
SPECIFICATIONS
COMPACT DISC RECEIVER9-889-020-022008C05-1© 2008.03
US ModelCanadian Model
HCD-BX20i/BX50BTi
Australian ModelSingapore Model
HCD-BX20i
Ver. 1.1 2008.03
Model Name Using Similar Mechanism HCD-BX5BT/EC68Base Unit Name BU-K6BD90-WODOptical Pick-up Block Name KSM-213DCP
• HCD-BX20i is the amplifi er, CD player, tuner and iPod section in CMT-BX20i.
• HCD-BX50BTi is the amplifi er, bluetooth, CD player, tuner and iPod section in CMT-BX50BTi. Photo: HCD-BX20i
– Continued on next page –
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.and any use of such marks by Sony Corporation is under license. Othertrademarks and trade names are those of their respective owners.
• MPEG Layer-3 audio coding technology and patents licensed fromFraunhofer IIS and Thomson.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
MainunitAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:(The United States model only)With 6 ohm loads, both channels driven, from 120 – 10,000Hz; rated 25 wattsper channel minimum RMS power, with no more than 10% total harmonicdistortion from 250 milliwatts to rated output.
DIN power output (rated):18 + 18 W (6 ohms at 1 kHz, DIN)Continuous RMS power output (reference): 25 + 25 W (6 ohms at 1 kHz,10% THD)
Inputs
Inputs
Amplifier section (BX20i)
Amplifier section (BX50BTi)
AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms
Outputs
Outputs
Bluetooth section (BX50BTi)
PHONES (stereo mini jack): accepts headphones of 8 ohms or moreSPEAKER: accepts impedance of 6 to 16 ohms
CD player sectionSystem: Compact disc and digital audio systemLaser Diode Properties
Emission Duration: ContinuousLaser Output*: Less than 44.6μW* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.Frequency response: 20 Hz – 20 kHzSignal-to-noise ratio: More than 90 dBDynamic range: More than 90 dB
Continuous RMS power output (reference): 25 + 25 watts (6 ohms at1 kHz, 10% THD)
AUDIO IN (stereo mini jack): voltage250mV, impedance 47 kilohms
PHONES (stereo mini jack): accepts headphones of 8 ohms or moreSPEAKER: accepts impedance of 6 ohms
Communication system: Bluetooth Standard version 2.0Output: Bluetooth Standard Power Class 2Maximum communication range: Line of sight approx. 10 m1)
Frequency band: 2.4 GHz band (2.4000 GHz – 2.4835GHz)Modulation method: FHSSCompatible Bluetooth profiles 2):
A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)
1) The actual range will vary depending on factors such as obstaclesbetween devices, magnetic filds around a microwave oven, staticelectricity, reception sensitivity, antenna’s performance, operatingsystem, software application, etc.
2) Bluetooth standard profiles indicate the purpose of Bluetoothcommunication between devices.
Supported codecs:Receive: SBC (Sub Band Codec), MP3Transmit: SBC (Sub Band Codec)
HCD-BX20i/BX50BTi
2
Notes on chip component replacement• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing• Keep the temperature of soldering iron around 270 °C during
repairing.• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY-RELATED COMPONET WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-TIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
CAUTIONUse of controls or adjustments or performance of procedures other than those specifi ed herein may result in hazardous radiation exposure.
This appliance is classifi ed as a CLASS 1 LASER product.This marking is located on the rear or bottom exterior.
iPod sectionCompatible iPod models:
iPod touch
iPod nano 3rdgeneration
(video) iPod classic
iPod nano 2ndgeneration
(aluminum)iPod 5th
generation(video)
iPod nano 1stgeneration
iPod 4thgeneration
(color display)
iPod 4thgeneration
iPod mini
GeneralPower requirements:
North American model: 120 V AC, 60 HzAustralian model: 230 – 240 V AC, 50/60 Hz
Power consumption: 63 wattsDimensions (w/h/d) (excl. speakers): Approx. 215 × 140 × 298 mmM
Design and specifications are subject to change without notice.
ass (excl. speakers):Approx. 3.9 kg
TunersectionFM stereo, FM/AM superheterodyne tunerFM tuner section:
Tuning range:North American model: 87.5 – 108.0 MHz (100 kHz step)Other models:87.5 – 108.0 MHz (50 kHz step)Antenna: FM lead antennaAntenna terminals: 75 ohms unbalancedIntermediate frequency: 10.7 MHz
AM tuner section:Tuning range:North American model:530 – 1,710 kHz (with 10 kHz tuning interval)531 – 1,710 kHz (with 9 kHz tuning interval)Australian model:531 – 1,710 kHz (with 9 kHz tuning interval)530 – 1,710 kHz (with 10 kHz tuning interval)
Antenna: AM loop antenna, external antenna terminalIntermediate frequency: 450 kHz
Other models:531 – 1,602 kHz (with 9 kHz tuning interval)530 – 1,610 kHz (with 10 kHz tuning interval)
Other models: 120 V, 220 V, 230 – 240 V AC, 50/60 Hz, adjustable withvoltage selector
Ver. 1.1
HCD-BX20i/BX50BTi
3
1. SERVICING NOTES ............................................. 4
2. GENERAL .................................................................. 6
3. DISASSEMBLY3-1. Disassembly Flow ........................................................... 103-2. Panel (Side L/R) .............................................................. 113-3. Top Panel Block .............................................................. 113-4. TOP KEY Board, IP Board, Panel Top (IP) .................... 123-5. Front Panel Block ........................................................... 123-6. Rear Panel Block ............................................................ 133-7. Panel (Rear) .................................................................... 133-8. AMP Board Block ........................................................... 143-9. POWER Board Block ..................................................... 143-10. MAIN Board ................................................................... 153-11. Loading Mechanism Block ............................................. 153-12. Base Unit ......................................................................... 163-13. Belt .................................................................................. 163-14. OP Base Assy (KSM-213D) ........................................... 17
4. TEST MODE ............................................................ 18
5. ELECTRICAL CHECKS ...................................... 20
6. DIAGRAMS6-1. Block Diagram - CD SERVO Section - .......................... 216-2. Block Diagram - iPod, TUNER, BLUETOOTH Section - ...................... 226-3. Block Diagram - MAIN Section - ................................... 236-4. Block Diagram - PANEL, POWER SUPPLY Section - ........................... 246-5. Printed Wiring Boards - CD Section - ............................ 266-6. Schematic Diagram - CD Board - ................................... 276-7. Printed Wiring Boards - BLUETOOTH Section - .......... 286-8. Schematic Diagram - BLUETOOTH Section - .............. 296-9. Printed Wiring Board - IP Board - .................................. 306-10. Schematic Diagram - IP Board - ..................................... 316-11. Printed Wiring Boards - MAIN Section - ....................... 326-12. Schematic Diagram - MAIN Section (1/3) - ................... 336-13. Schematic Diagram - MAIN Section (2/3) - ................... 346-14. Schematic Diagram - MAIN Section (3/3) - ................... 356-15. Printed Wiring Boards - HEADPHONE/AMP Section - ..................................... 366-16. Schematic Diagram - HEADPHONE/AMP Section - .... 376-17. Printed Wiring Boards - PANEL Section - ..................... 386-18. Schematic Diagram - PANEL Section - .......................... 396-19. Printed Wiring Board - POWER Board - ........................ 406-20. Schematic Diagram - POWER Board - .......................... 41
7. EXPLODED VIEWS7-1. Panel Section ................................................................... 507-2. Top Panel Section ........................................................... 517-3. Front Panel Section ......................................................... 527-4. MAIN Board Section ...................................................... 537-5. POWER Board Section ................................................... 547-6. Loading Mechanism Section .......................................... 557-7. Base Unit Section (BU-K6BD90-WOD) ....................... 56
8. ELECTRICAL PARTS LIST .............................. 57
TABLE OF CONTENTSSAFETY CHECK-OUTAfter correcting the original service problem, perform the follow-ing safety check before releasing the set to the customer:Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage.Check leakage as described below.
LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes.). Leakage current can be measured by any one of three methods.1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these instruments.
2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)
Fig. A. Using an AC voltmeter to check AC leakage.
1.5 kΩ0.15 μFACvoltmeter(0.75 V)
To Exposed MetalParts on Set
Earth Ground
HCD-BX20i/BX50BTi
4
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostat-ic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts.The fl exible board is easily damaged and should be handled with care.
NOTES ON LASER DIODE EMISSION CHECKThe laser beam on this model is concentrated so as to be focused on the disc refl ective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.
UNLEADED SOLDERBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to
about 350 °C.Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SECTION 1SERVICING NOTES
ANTITHEFT UNLOCK MODEProcedure:1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button to select “CD”.3. Press two buttons of [x/CANCEL] and [A] for 5 seconds.4. The message “UNLOCKED” is displayed on the fl uorescent
indicator tube and the disc tray is unlocked.
Note: When “LOCKED” is displayed, the tray lock is not released by turning power on/off with the [?/1] button.
NOTE OF REPLACING THE IC904 ON THE BT BOARDIC904 on the BT board cannot exchange with single. When IC904 on the BT board is damaged, exchange the entire mounted board.
Model Part No.HCD-BX20i: US model 3-293-462-0[]
HCD-BX20i: Canadian model 3-293-463-0[]
HCD-BX50BTi: US model 3-293-464-0[]
HCD-BX50BTi: Canadian model 3-293-465-0[]
HCD-BX20i: Australian model 3-295-838-0[]
HCD-BX20i: Singapore model 3-296-979-0[]
MODEL IDENTIFICATION
Part No.
– Rear View – (Except Singapore model)
Ver. 1.1
– Bottom View – (Singapore model)
Part No.
HCD-BX20i/BX50BTi
5
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note: Please insert a screwdriver after removing the panel (side L). About disassembly of the panel (side L), please refer to “3-2. Panel (Side L/R)” (page 13).
Open the tray.
Push the boss.
Insert the driver.
HCD-BX20i/BX50BTi
6
SECTION 2GENERAL
This section is extracted from instruction manual.
Basic Operations
This manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names.
Before using the system
To use the remoteSlide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below.
Notes on using the remoteWith normal use, the batteries should last for about six months.Do not mix an old battery with a new one or mix different types of
batteries.If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clockUse buttons on the remote to set the clock.
1 Turn on the system.Press (power) .
2 Select the clock set mode.Press TIMER MENU . If the current mode appears on the display, press / repeatedly to select “CLOCK SET?” and then press (enter) .
3 Set the time.Press / repeatedly to set the hour, and then press (enter) . Use the same procedure to set the minutes.The clock settings are lost when you disconnect the power cord or if a power failure occurs.To display the clock when the system is off, press DISPLAY . The clock is displayed for about 8 seconds.
To use the iPodInsert an iPod Dock Adaptor into the unit’s connector before use.For details on the supplied iPod Dock Adaptors, refer to the instructions supplied with the Dock Adaptors.
Adjusting the sound
To adjust the volumePress VOLUME +/ (or VOL +/ on the unit) .
To add a sound effect
To PressGenerate a more dynamic sound (Dynamic Sound Generator X-tra)
DSGX on the unit.
Set the sound effect EQ repeatedly to select “BASS” or “TREBLE,” and then press +/ repeatedly to adjust the level.
Playing a CD/MP3 disc
1 Select the CD function.Press FUNCTION +/ (or FUNCTION on the unit) repeatedly.
2 Place a disc.Press (open/close) on the unit, and place a disc with the label side up on the disc tray.
To close the disc tray, press (open/close) on the unit.Do not force the disc tray closed with your finger, as this may damage the unit.
3 Start playback.Press (play) (or CD (play/pause) on the unit) .
To PressPause playback (pause) (or CD (play/
pause) on the unit) .To resume play, press the button again.
Stop playback (stop) (or /CANCEL on the unit) .
Select a folder on an MP3 disc
+/ (select folder) .
Select a track or file / (go back/go forward) .
Find a point in a track or file
Hold down / (rewind/fast forward) during playback, and release the button at the desired point.
Select Repeat Play REPEAT repeatedly until “REP” or “REP1” appears.
To change the play modePress PLAY MODE repeatedly while the player is stopped. You can select normal play (“ ” for all MP3 files in the folder on the disc), shuffle play (“SHUF” or “ SHUF*”), or program play (“PGM”).* When playing a CD-DA disc, (SHUF) Play performs the same
operation as normal (shuffle) play.
Notes on Repeat PlayAll tracks or files on a disc are played repeatedly up to five times. “REP1” indicates that a single track or file is repeated until you stop
it.
Notes on playing MP3 discsDo not save other types of tracks or files or unnecessary folders on a
disc that has MP3 files.Folders that have no MP3 files are skipped.MP3 files are played back in the order that they are recorded onto
the disc.The system can only play MP3 files that have a file extension of
“.MP3”.If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may malfunction.The maximum number of:folders is 255 (including the root folder).MP3 files is 511.MP3 files and folders that can be contained on a single disc is 512.folder levels (the tree structure of files) is 8.Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all.
Notes on playing multisession discsIf the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
1 Select “TUNER FM” or “TUNER AM.”Press FUNCTION +/ (or FUNCTION on the unit) repeatedly.
2 Select the tuning mode.Press TUNING MODE repeatedly until “AUTO” appears.
3 Tune in the desired station.Press +/ (or TUNE +/ on the unit) . Scanning stops automatically when a station is tuned in, and then “TUNED” and “STEREO” (for stereo programs only) appear.
To stop automatic scanningPress (stop) (or /CANCEL on the unit) .
To tune in a station with a weak signalIf “TUNED” does not appear and the scanning does not stop, press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear, and then press +/ (or TUNE +/ on the unit) repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo stationPress FM MODE repeatedly until “MONO” appears to turn off stereo reception.
Playing the iPod
1 Select the iPod function.Press FUNCTION +/ (or FUNCTION on the unit) repeatedly.
2 Place the iPod.
3 Start playback.Press (play) (or iPod (play/pause) on the unit) .
To control the iPodYou can control your iPod with the following buttons on the remote or unit.
To PressPause playback (pause) (or iPod
(play/pause) on the unit) or (stop) .
Scroll up/down the iPod menus
/. You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch.
Select a track or chapter of audiobook/podcast
/ (go back/go forward) . To fast-forward or fast-rewind, hold down the button.
Choose the selected item
/ (enter) (or ENTER on the unit) . You can choose the selected item much like the center button on the iPod or the touch operation of the iPod touch.
Find a point in a track or chapter of audiobook/podcast
/ (fast rewind/fast forward) during playback, and release the button at the desired point.
Return to the previous menu or select a menu
/TOOL MENU / (return) . You can return to the previous menu or select a menu much like the Menu button on the iPod or the touch operation of the iPod touch.
To use the system as a battery chargerYou can use the system as a battery charger for the iPod when the system is both on and off.The charging begins when the iPod is placed on the unit’s connector . The charging status appears in the iPod display. For details, see the user’s guide of your iPod.
To stop charging the iPodRemove the iPod. If you stop charging the iPod when the system is off, press DISPLAY until the clock disappears in the display.
NotesWhen placing or removing the iPod, handle the iPod in the same
angle as that of the iPod connector on the unit and do not twist or sway the iPod to prevent connector damage.Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.When placing or removing the iPod, brace the unit with one hand
and take care not to press the controls of the iPod by mistake.To remove the iPod Dock Adaptor, pull it up with your fingernail or
a flat object using the slot inside the adaptor.Before disconnecting the iPod, pause playback.While playing video, you cannot use /. You can fast
rewind (fast forward) by holding down /.To change the volume level, use VOLUME +/ (or VOL +/ on the
unit) . The volume level does not change even if adjusted on the iPod.This system is designed for iPod only. You cannot connect any other
portable audio players.To use an iPod, refer to the user’s guide of your iPod.Sony cannot accept responsibility in the event that data recorded to
iPod is lost or damaged when using an iPod with this unit.
Changing the display
To PressChange information on the display1)
DISPLAY repeatedly when the system is on.
Check the clock when the system is off2)
DISPLAY when the system is off3). The clock is displayed for 8 seconds.
1) For example, you can view CD/MP3 disc information, such as;track or file number during normal play.track or file name (“ ”) during normal play.artist name (“ ”) during normal play.album or folder name (“ ”) during normal play.total playing time while the player is stopped.
2) The clock is displayed continuously while the iPod is being charged. To turn off the clock display, press DISPLAY (See “To stop charging the iPod”).
3) The STANDBY indicator on the unit lights up when the system is off.
Notes on the display informationCharacters that cannot be displayed appear as “_”.The following are not displayed:total playing time for a CD-DA disc depending on the play mode.total playing time and remaining playing time for an MP3 disc.The following are not displayed correctly:folder and file names that do not follow either ISO9660 Level 1,
Level 2 or Joliet in the expansion format.The following is displayed:ID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used (up to 62 characters).
Using optional audio components
To connect an optional headphonesConnect headphones to the PHONES jack on the unit.
To connect an optional componentConnect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Turn down the volume on the system, and then select the AUDIO IN function.
HCD-BX20i
HCD-BX20i/BX50BTi
7
Other Operations
Creating your own program (Program Play)
1 Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function.
2 Press PLAY MODE repeatedly until “PGM” appears while the player is stopped.
3 Press / repeatedly until the desired track or file number appears.When programming files, press +/ repeatedly to select the desired folder, and then select the desired file.
Total playing time of program
(including selected track
or file)
Selected track or file
number
4 Press (or ENTER on the unit) to add the track or file to the program.“.” appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 file.
5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files.
6 To play your program of tracks or files, press (or CD on the unit) .The program remains available until you open the disc tray. To play the same program again, press (or CD on the unit) .
To cancel Program PlayPress PLAY MODE repeatedly until “PGM” disappears while the player is stopped.
To delete the last track or file of the programPress CLEAR while the player is stopped.
Presetting radio stationsYou can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number.Use buttons on the remote to preset stations.
1 Tune in the desired station (See “Listening to the radio”).
2 Press TUNER MEMORY .
Preset number
3 Press +/ repeatedly to select your desired preset number.If another station is already assigned to the selected preset number, the station is replaced by the new stations.
4 Press .
5 Repeat steps 1 through 4 to store other stations.You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
6 To call up a preset radio station, press TUNING MODE repeatedly until “PRESET” appears, and then press +/ repeatedly to select the desired preset number.
Using the TimersThe system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority.Use buttons on the remote to use the timer functions.
Sleep Timer:You can fall asleep to music. This function works even if the clock is not set.Press SLEEP repeatedly. If you select “AUTO,” the system automatically turns off after the current disc stops or in 100 minutes.
Play Timer:You can wake up to CD, tuner or iPod at a preset time.
Make sure you have set the clock.
1 Prepare the sound source.Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program.
2 Press TIMER MENU .
3 Press / repeatedly to select “PLAY SET?,” and then press .“ON” appears, and the hour indication flashes.
4 Set the time to start playback.
Press / repeatedly to set the hour, and then press .The minute indication flashes. Use the procedure above to set the minutes.
5 Use the same procedure as in step 4 to set the time to stop playback.
6 Select the sound source.Press / repeatedly until the desired sound source appears, and then press . The display shows the timer settings.
7 Press to turn off the system.The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play.
To activate or check the timer again1 Press TIMER MENU .
“TIMER SEL?” flashes in the display.
2 Press .
3 Press / repeatedly to select “PLAY SEL?,” then press .
To cancel the timerRepeat the same procedure as above until “TIMER OFF?” appears in step 3, and then press .
To change the settingStart over from step 1.
Note on the iPod touch userThe Play Timer may not be activated depending on the status of the connected iPod touch.
TipThe Play Timer setting remains as long as the setting is not canceled manually.
HCD-BX20i/BX50BTi
8
HCD-BX50BTi
Guide to parts and controlsThis manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-BX50BTi/Compact Disc Receiver)Front panel Top panel
Remote (RM-AMU009)
/ (power) buttonPress to turn on the system.
Lights up when the system is turned off.STANDBY indicator
Remote sensor
BLUETOOTH buttonPress to make a connection,disconnection, or pairing with a Bluetooth device.
BLUETOOTH indicatorLights up when the Bluetooth functionis active.
(open/close) buttonPress to open or close the disc tray.
AUDIO IN jackConnect to an optional audiocomponent.
PHONES jackConnect the headphones.
Playback buttons and functionbuttonsUnit: BLUETOOTH (play/pause) buttonPress to select the Bluetooth function.Press to start or pause playback of themusic on the Bluetooth device (Bluetoothmobile phone, etc.).
HCD-BX20i/BX50BTi
9
Unit: CD (play/pause)buttonPress to select the CD function.Press to start or pause playback of a disc.
Unit: iPod (play/pause)buttonPress to select the iPod function.Press to start or pause playback of theiPod.
Remote: (play) button,(pause) button
Press to start or pause playback.
TUNER/BAND buttonPress to select the TUNER function.Press to select FM or AM receptionmode.
Unit: FUNCTION buttonRemote: FUNCTION +/– buttonPress to select the function.
iPod connectorPlace an iPod on the connector to listento audio contents stored in the iPod.
REPEAT/FM MODE buttonPress to listen to a disc, a single track orfile repeatedly.Press to select the FM reception mode(monaural or stereo).
PLAY MODE/TUNING MODE buttonPress to select the play mode of a CD orMP3 disc.Press to select the tuning mode.
Unit: ENTER buttonRemote: (enter) buttonPress to enter the settings.
/ (go back/go forward)button
Unit: TUNE +/– (tuning) buttonRemote: +/– (tuning) buttonPress to tune in the desired station.
Press to select a track or file.
+/– (select folder) buttonPress to select a folder.
Press to find a point in a track or file.
/ (rewind/fast forward)button
Unit: VOL +/– buttonRemote: VOLUME +/– buttonPress to adjust the volume.
Press to select the sound effect.
DISPLAY buttonPress to change the information on thedisplay.
Sound buttonsUnit: DSGX buttonRemote: EQ button
Unit: /CANCEL (stop/cancel)buttonRemote: (stop) buttonPress to stop playback.
CLEAR buttonPress to delete a pre-programmed track
Press to erase the pairing registrationor file.
information of the Bluetooth device.
TIMER MENU buttonPress to set the clock and the Play Timer.
TOOL MENU buttonPress to select a menu when using theiPod.
Battery compartment lid
RETURN buttonPress to return to the previous menuwhen using the iPod.
/ / / buttonPress to select the menu items.
TUNER MEMORY buttonPress to preset the radio station.
SLEEP buttonPress to set the Sleep Timer.
Setting the clockUse buttons on the remote to set theclock.
1 Press / to turn on the system.
2 Press TIMER MENU .
display.The hour indication flashes in the
If “PLAY SET?” flashes in the display,press / repeatedly to select“CLOCK SET?” and then press .
3 Press / repeatedly to set the hour, and then press .
4 Use the same procedure to set the minutes.
disconnect the power cord or if a power failure occurs.
The clock setting are lost when you
To display the clock when the systemis offPress DISPLAY . The clock is displayedfor about 8 seconds.
HCD-BX20i/BX50BTi
10
SECTION 3DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. PANEL (SIDE L/R) (Page 11)
3-3. TOP PANEL BLOCK (Page 11)
3-5. FRONT PANEL BLOCK (Page 12)
3-11. LOADING MECHANISM BLOCK (Page 15)
3-12. BASE UNIT (Page 16)
3-13. BELT (Page 16)
3-14. OP BASE ASSY (KSM-213D) (Page 17)
3-6. REAR PANEL BLOCK (Page 13)
3-8. AMP BOARD BLOCK (Page 14)
3-10. MAIN BOARD (Page 15)
3-9. POWER BOARD BLOCK (Page 14)
3-7. PANEL (REAR) (Page 13)
3-4. TOP KEY BOARD, IP BOARD, PANEL TOP (IP) (Page 12)
SET
HCD-BX20i/BX50BTi
11
Note: Follow the disassembly procedure in the numerical order given.
3-2. PANEL (SIDE L/R)
two screws (BVST3 × 6 (BX20i: US, Canadian/BX50BTi) /BVTT3 × 6 (BX20i: Australian, Singapore))
two screws (BVST3 × 6 (BX20i: US, Canadian/BX50BTi) /BVTT3 × 6 (BX20i: Australian, Singapore))
screw (BVTP3 × 10)
screw (BVTP3 × 10)
panel (side L)
panel (side R)
3-3. TOP PANEL BLOCK
two screws (BVTT3 × 6)
five screws (BVTP3 × 10)
two screws (BVTT3 × 6)
connector (CN325)
connector (CN322)
top panel block
Ver. 1.1
HCD-BX20i/BX50BTi
12
3-4. TOP KEY BOARD, IP BOARD, PANEL TOP (IP)
four screws (BVTP2.6)
TOP KEY board
five screws (BVTP2.6) two screws
(2.6 × 10)
HOLD board
four screws (PTP2 × 5)
IP board
escutcheon
four screws (BVTP2.6 )
base (IP) assy
panel top (IP)
button (tune)
button (function B)
button (function)
button (enter)
connector (CN101)
button (VOL)
3-5. FRONT PANEL BLOCK
two screws (BVST3 × 6 (BX20i: US, Canadian/BX50BTi) /BVTT3 × 6 (BX20i: Australian, Singapore))
flexible flat cable (15 core) (BT board: CN901/MAIN board: CN323)
flexible flat cable(15 core)
flexible flat cable (15 core)
two screws (BVTP3 × 8)
shield case (lid)
(BX50BTi only)
connector 60mm ±2mm
60mm ±2mm
flexible flat cable (13 core) (CN306)
screw (BVTT3 × 6)
front panel block
Note: When exchanging or removing flexible flat cable between the BT substrate and the MAIN substrate, please be sure to bend flexible flat cable as follows and install it in shield case (lid) using the tape installed from origin.
tape
Ver. 1.1
HCD-BX20i/BX50BTi
13
3-6. REAR PANEL BLOCK
flexible flat cable (9 core) (CN310)
connector (CN313)
rear panel block
two screws (B3)
three screws (BVST3 × 6: Australian, Singapore /BVTT3 × 6: US, Canadian)
connector (CN905)
connector (CN902)
(BX20i: Singapore model)
3-7. PANEL (REAR)
two screws (BVTP3 × 16)
two screws (BVTP2.6)
VOL SELECT board panel (rear)
D.C. fan (M901)
plate (GND TU)
two feet (felt)
tuner (FM/AM)
flexible flat cable (9 core)
two screws (BVST3 × 6: Australian, Singapore /BVTT3 × 6: US, Canadian)
(BX20i: Singapore model)
Ver. 1.1
HCD-BX20i/BX50BTi
14
3-8. AMP BOARD BLOCK
flexible flat cable (7 core) (AMP board: CN308/MAIN board: CN309)
two screws (BV3)
AMP board block
connector (CN320)
connector (CN312)
3-9. POWER BOARD BLOCK
screw (BV3)
coating clip
four screws
connector (CN904) connector (CN901)
POWER board block
HCD-BX20i/BX50BTi
15
3-10. MAIN BOARD
connector (CN316) connector
(CN303)
two screws (BVTT3 × 6)
MAIN board
3-11. LOADING MECHANISM BLOCK
two screws (BVTP3 × 8) BT board block
holder (CD)
(BX50BTi)(BX20i)
three screws (BV3)
loading mechanism block
flexible flat cable (21 core) (MAIN Board: CN305)
flexible flat cable (5 core) (CN311)
flexible flat cable (5 core) (CN001)
flexible flat cable (21 core) (CD board: CN201)
two screws (BVTP3 × 8)
door CD
HCD-BX20i/BX50BTi
16
3-12. BASE UNIT
3-13. BELT
insulator
insulator
base unit insulator
insulator
two springs (insulator)
two floating screws
two floating screws
floating screw
loading (BK) assy
– Bottom view –
two springs (insulator)
belt
claw
claw
tray (AU)
belt
position of belt
HCD-BX20i/BX50BTi
17
3-14. OP BASE ASSY (KSM-213D)
Remove four solders.
flexible flat cable (16 core) (CN301)
CD board
op base assy (KSM-213D)
HCD-BX20i/BX50BTi
18
SECTION 4TEST MODE
COLD RESETThe cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer.Procedure:1. Press three buttons of [x/CANCEL], [VOL +] and [?/1] si-
multaneously.2. The system is reset and becomes standby states.
COMMON TEST MODEThis mode is used to check operations of amplifi er.Procedure1. Press the [?/1] button to turn the power on.2. Press three buttons of [TUNER/BAND], [x/CANCEL] and
[ENTER] simultaneously.3. When the COMMON test mode is activated, “AUDIO IN” is
displayed on the liquid crystal display and “cPLAY SLEEP” blink on the fl uorescent indicator tube.
4. Each time [EQ] button on the remote commander is pressed, the display changes starting “TONE MAX”, “TONE MIN” and “TONE FLAT” this order.
5. Press the [VOL –] button, “VOLUME MIN” is displayed on the fl uorescent indicator tube. Press the [VOL +] button, “VOLUME MAX” is displayed on the fl uorescent indicator tube.
6. To release this mode, press the [?/1] button.
PANEL TEST MODEThis mode is used to check the liquid crystal display, LED, model, destination, software version and key.Procedure1. Press the [?/1] button to turn the power on.2. Press three buttons of [TUNER/BAND], [DSGX] and [EN-
TER] simultaneously.3. All segments on the fl uorescent indicator tube, [STANDBY]
LED and [BLUETOOTH OPR] LED (BX50BTi only) light up.
4. Press the [ENTER] button, the model and destination are alter-nately displayed on the fl uorescent indicator tube.
5. Press the [ENTER] button again, MC version is displayed on the fl uorescent indicator tube.
6. Each time [ENTER] button is pressed, the display changes starting from MC version, GC version, BT version (BX50BTi only), CLA version, CD version, CDD version, CDMA ver-sion, CDMB version, BDA version, BDB version, ST version, TA version and TM version this order, and returns to the MC version display.
7. When [x/CANCEL] button is pressed while the MC version is displayed, year, month and day of the software creation is displayed. When [x/CANCEL] button is pressed again, the display returns to the MC version display.
8. Press the [DSGX] button, the key test mode is activated and “K 0” is displayed on the fl uorescent indicator tube.
9. Each time a button is pressed, “K” value increases. However, once a button is pressed, it is no longer taken into account.
All keys are pressed, display becomes “K19” (BX20i)/“K20” (BX50BTi).
10. Press the [VOL +] button, the key AD monitor mode is acti-vated and “FFFFFF” is displayed on the fl uorescent indicator tube.
11. Each time a button is pressed, the AD of each button is dis-played on the fl uorescent indicator tube.
12. To release this mode, press three buttons in the same manner as step 2, or disconnect the power cord.
TUNER STEP CHANGEA step of AM tuning interval can be changed over between 9 kHz or 10 kHz.Procedure1. Press the [?/1] button to turn the power on.2. Press the [TUNER/BAND] button to select “AM” .3. Press the [?/1] button again to turn the power off.4. Press two buttons of [ENTER] and [?/1] simultaneously.5. The message “STEP 9” or “STEP 10” is displayed on the fl uo-
rescent indicator tube and thus the tuning interval is changed over.
CD SHIP MODEThis mode moves the optical pick-up to the position durable to vibration. Use this mode when returning the set to the customer after repair.Procedure1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button to select “CD”.3. Press three buttons of [DSGX], [VOL +] and [A] simultane-
ously.4. After the “STANDBY” display blinks, “LOCK” is displayed
on the fl uorescent indicator tube, the ship mode is set.
CD SHIP MODE & MEMORY CLEARThis mode is used to perform CD ship mode and cold reset simul-taneously.Procedure1. Press the [?/1] button to turn the power on.2. Press three buttons of [x/CANCEL], [VOL +] and [A] simul-
taneously.3. After the “STANDBY” display blinks, “LOCK” is displayed
on the fl uorescent indicator tube the ship mode is set and the system is reset.
ANTITHEFT LOCK MODEThis mode is used to unable to take sample disc out of disc tray in the shop.Procedure1. Press the [?/1] button to turn the set on.2. Press the [A] button to open the disc tray and set the CD disc.3. Press the [A] button to close the disc tray.4. Press the [FUNCTION] button to select “CD”.5. Press two buttons of [x/CANCEL] and [A] for 5 seconds.6. The message “LOCKED” is displayed on the fl uorescent indi-
cator tube and the disc tray is locked. (Even if pressing the Z button, the message “LOCKED” is displayed on the fl uores-cent indicator tube and the disc tray is locked)
7. To release from this mode, press two buttons of [x/CANCEL] and [A] for 5 seconds.
8. The message “UNLOCKED” is displayed on the fl uorescent indicator tube and the disc tray is unlocked.
CD POWER MANAGEThis mode is used to changed over CD power on/off for decreasing of reception noise in the tuner mode.Procedure1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button to select “CD”.3. Press the [?/1] button again to turn the power off.4. Press two buttons of [x/CANCEL] and [?/1] simultaneously.5. The message “CD POWER”, “ON” or “CD POWER”, “OFF”is
displayed on the fl uorescent indicator tube, and CD power on/off is changed over in the tuner mode.
HCD-BX20i/BX50BTi
19
CD SERVICE MODEThis mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the optical pick-up.Procedure:1. Press the [?/1] button to turn the power on.2. Press the [FUNCTION] button to select “CD”.3. Press three buttons of [x/CANCEL], [VOL –] and [A] simul-
taneously, the message “SERVICE MO” is displayed on the fl uorescent indicator tube.
4. Press the [l m TUNE –] button to move the optical pick-up to inside track and the message “SLED IN” is displayed on the fl uorescent indicator tube, or press the [M L TUNE +] button to outside track and the message “SLED OUT” is displayed on the fl uorescent indicator tube.
5. Press the [CD u] button, “LD ON” or “LD OFF” is displayed on the fl uorescent indicator tube. Each time [CD u] button is pressed, laser diode on/off is changed over.
6. To release this mode, press the [?/1] button.
HCD-BX20i/BX50BTi
20
SECTION 5ELECTRICAL CHECKS
FM TUNE LEVEL CHECK
Procedure:1. Turn on the set.2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation :75 kHzModulation : 1 kHzANT input : 35 dBu (EMF)
Note: Use 75 ohm coaxial cable to connect signal generator and the set. You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and tune A, B and C signals.4. Confi rm “TUNED” is lit on the display for A, B and C sig-
nals.
When the selected station signal is received in good condition, “TUNED” is displayed.
Note:1. CD Block is basically constructed to operate without adjust-
ment.2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicat-
ed.3. Use an oscilloscope with more than 10 MΩ impedance.4. Clean the object lens by an applicator with neutral detergent
when the signal level is low than specifi ed value with the fol-lowing checks.
5. Check the focus bias check when optical pick-up block is re-placed.
FOCUS BIAS CHECK
Procedure:1. Connect oscilloscope to TP121 (RFI) and TP124 (VC) on the
CD board.2. Press the [?/1] button to turn the power on.3. Set disc (YEDS-18) on the disc tray and press the [CD u]
button to playback.4. Confi rm that oscilloscope waveform is as shown in the fi gure
below. (eye pattern) A good eye pattern means that the diamond shape (◊) in the
center of the waveform can be clearly distinguished.
Checking Location:
TUNER SECTION CD SECTION
signalgenerator
set
+–
CD board
TP121 (RFI)TP124 (VC)
oscilloscope(DC range)
VOLT/DIV: 200 mVTIME/DIV: 500 ns
level:1.2 ±0.3 Vp-p
TP124(VC)
– CD Board (Conductor Side) –
TP121(RFI)
IC101
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2121
SECTION 6DIAGRAMS
6-1. BLOCK DIAGRAM - CD SERVO Section -
SYSTEM CONTROLLERIC301 (1/4)
CD-MP3 PROCESSORIC101
MUTE
2-AXISDEVICE
(TRA
CKIN
G)(F
OCUS
)
95
89
A
AVDD+3.3VDETECTOR
FNi1 (A)
RFo97 FPi1 (B)
88
2
AGCi
3RFRP RFZI
76TEi TEZi
83RFEQo 81 RFi82 RFRPi
30LO
27RO
38BUS0
R-CH94 FNi2 (C)
96 FPi2 (D)
100 TNi (E)
98 TPi (F)
91 LDo 92MDi
2 VO1+
1 VO1–
13 DMo
AUTOMATICPOWER CONTROL
Q301LDPD
LASER DIODE
OPTICAL PICK-UPBLOCK
(KSM-213DCP)
B
C
D
E
F
12 FMo
10 TRO
9 FMO
20 IO0 (/HSO)
I-V A
MP
M401(SPINDLE)
M402(SLED)
12 VO2–
11 VO2+
18 VO3+
17 VO3–
26 VO4+
27
7
IN4’ 24
IN3’ 20
IN2’ 9
IN1 3
BIAS 23
84 VRo
VO4–
M
M
FOCUS/TRACKING COIL DRIVE,SLED/SPINDLE MOTOR DRIVE
IC401
S201(LIMIT)
DVDD+3.3V
24XO
23XI
X10216.9344MHz
60 CD DRIVER MUTE
LOADINGMOTOR DRIVE
IC311
CDM LOAD IN 85CDM LOAD OUT
CDM SW (OPEN)
CDM SW (CLOSE)
84
88
87
M
ACD-L
: CD PLAY
SIGNAL PATHR-ch is omitted due to same as L-ch.
VCC
A
B
C
D
E
F
LD
PD
SP+
VC
SP–
SL+
SL–
T+
T–
F+
F–
3 CD BUS0
39BUS1 2 CD BUS1
40BUS2 (SO) 1 CD BUS2
70 CD CLK
41BUS3 (SI) 100 CD BUS3
42BUCK (CLK)
69 CD CCE43XCCE
54SBSY
48PIO0 68 MP3 IREQ
19 SBSY37XRST 59 CD RESET
S001DISC TRAY
OPEN/CLOSE DETECTOPEN
CLOSE
M001(LOADING)
(Page 23)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2222
6-2. BLOCK DIAGRAM - iPod, TUNER, BLUETOOTH Section -
ANT901
33 BT CTS34 BT_RTS
31 BT DOUT32 BT DIN
IC904BLUETOOTH MODULE
10A-OUT_P_L
9A-OUT_N_L
5A-IN_P_L
4A-IN_N_L
8A-OUT_P_R
7A-OUT_N_R
41UART_TXD40UART_RXD
38UART_CTS39UART_RTS
45 BT_RESET44 BT_AV_ROLE12PIO_00
46RESET
MIX AMPIC902
3A-IN_P_R
2A-IN_N_R
37 AUDIO_MUTE
iPod INTERFACEIC101
78 CLINK_RX_DIN
SYSTEM CONTROLLERIC301 (2/4)
CN102 (iPod)
27
28
18
L-CH
R-CH
LINE-OUT-L
LINE-OUT-R
24 TXD_iPodRXD19
23 RXD_iPodTXD
3046DGND
88 RESET
VBUS +5V
VBUS
BiPod-L
MUTINGCONTROLSWITCH
Q106
RESET SIGNALGENERATOR
IC103
MUTINGQ103, 105
ETUNER-L
28TXD_DMPORT77 CLINK_TX_DOUT29RXD_DMPORT
73 NC
DETECT
9XOUT
11XIN
X10120MHz
PATTERNANTENNA
(FOR BLUETOOTH)
R-CH
R-CH
LINE AMPIC901
(BX50BTi)
FBT-L
GBT OUT-L
TUNER (FM/AM)
AM
FM ANT
AM ANT
L OUT
R OUT
DO/STEREO
R-CH
ST DINST CLK
ST CE
FM 75 ΩCOAXIAL
ANTENNA
26 DATA IN/STEREOTUNED 6 TUNER TUNED
28 ST DATA OUT27 ST CLK25 ST CE
: TUNER (FM/AM)
SIGNAL PATHR-ch is omitted due to same as L-ch.
: BLUETOOTH IN
: BLUETOOTH OUT
: AUDIO
D104
D102
LINE AMPIC303
: iPod
(Page 23)
(Page 23)
(Page 23)
(Page 23)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2323
6-3. BLOCK DIAGRAM - MAIN Section -
(BX50BTi)
(BX50BTi)
(BX50BTi)
(BX20i)
(BX20i)
OUTPUT SELECTORIC309
A
1314
12
10
AUDIO INR-CHJ301
CD-LA
BT-LF
TUNER-LE
iPod-LB
PROTECT J
10
31
26
SDA
25
SCL
AMP
DATA
24
AMP
CLOC
K
22
INH
40
SEL A
39
TA LI
NE M
UTE
23
GBT OUT-L
X1
X0
OUT1
INPUT SELECTOR,ELECTRICAL VOLUME,
SURROUND/TONE CONTROLIC304
SYSTEM CONTROLLERIC301 (3/4)
: AUDIO
: CD PLAY
SIGNAL PATHR-ch is omitted due to same as L-ch.
: AUDIO IN
: TUNER (FM/AM)
BT A
UDIO
OUT
MUT
E
43
Q310
D15
C1
SEL1
VOL1
B1A1
X
INPUT SELECTORIC312
A
1314
12
10
X1
X0
Q319
INH6
Q320
X
11
MUTINGQ103
R-CH
23
MUTINGCONTROLSWITCH
Q340, 341
(BX50BTi)
(BX50BTi)
POWER AMPIC601
11 CH1 IN
10
MONI
TOR
CH1 OUT+ 4CH1 OUT– 5
13
STBY
J500
R-CHPHONES
SPEAKER
+–
–+
R
LJ302
DCDETECT
Q342 – 344
POWERMONITOR
Q345
M901(FAN)
+9V MM
AC DET K
D313
STK-
ON
53
FAN MOTORDRIVE
Q316, 317
FAN MOTORDETECT
Q307, 347, 348
: iPod
7
(Page 21)
(Page 22)
(Page 22)
(Page 22)
(Page 22)
(Page 24)
(Page 24)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2424
6-4. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section -
SIRCS4
SYSTEM CONTROLLERIC301 (4/4)
(AC IN)
SUB POWERTRANSFORMER
T902
RY901
MAIN POWERTRANSFORMER
T901
RECTD911 – 914
D923D922
D330
D920PROTECTD332 D322
D318, 321
D303
AMP B+
F901
F902
TOPOWER AMP AMP B–
+9VREGULATOR
IC305
REGULATORQ304 - 306
UNREG SUB
UNREG SUB
SYS +3.3V
+9V
RECTD907, 908
EVER +3.3V
RESET SIGNALGENERATOR
IC310
RELAYDRIVEQ315
LINEFILTERLF901
TUNER, BT +9V
5STBY-RELAY
20AC CUT
66I-POWER MONITOR
12RESET
REMOTE CONTROLRECEIVER
IC901
X30132.768kHz
11
10
XCOUT
INOUT
13
15X3025MHz
XOUT
XIN
BLUETOOTH OPR
S801 – 807,S809 – 821
(FRONT PANEL KEYS)KEY1 – KEY3
RESETSWITCH
Q309
AC DETECTQ301
B+ SWITCHQ312, 313
VM +7V
RECTD924 – 927
+5VREGULATOR
IC306
VBUS POWERON/OFF SWITCH
IC201VBUS +5V
BT +3.3V+3.3V
REGULATORIC903
IP +3.3V+3.3V
REGULATORIC102
CD +1.5V+1.5V
REGULATORIC201
KEY WAKE UP74D774
D903
(BX50BTi)
LED DRIVEQ902
STANDBYD902 STANDBY LED89LED DRIVE
Q901
(BX50BTi)
57CD ON
94X5V FLAG
80DMPORT POWER
AVDD +3.3V
DVDD +3.3V +3.3VREGULATOR
Q302, 303,Q390, 392
RECTD916 – 919
AC DET K
PROTECT J
+9V +4VVOLTAGEDETECT
Q393
PROTECTDETECT
Q333, 338
VFL
FL901FLUORESCENT
INDICATOR TUBE
T801DC/DC
CONVERTER
RECTD904, 905
OSCQ903
GRID DRIVEQ905
90919392
57P1
FL RESETFL CSFL SCLKFL SD
RSTBCSB
CLKBDIN
GR1AD2, AD1 SG5 – SG35,SG1 – SG4
GR2 – GR11
FLUORESCENTINDICATOR TUBE DRIVER
IC902
+9V
52
32
535455
1 – 31, 61 – 64 33 – 4259, 60
81 –
83
+9VREGULATOR
IC307
(BX20i: SP)
(EXCEPT BX20i: SP)
VOLTAGESELECTOR
S901
Abbreviation: Singapore modelSP
(Page 23)
(Page 23)
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2525
For Schematic Diagrams.Note:• All capacitors are in μF unless otherwise noted. (p: pF) 50 WV or less are not indicated except for electrolytics
and tantalums.• All resistors are in Ω and 1/4 W or less unless otherwise
specifi ed.• f : internal component.• 2 : nonfl ammable resistor.• C : panel designation.
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.(In addition to this, the necessary note is printed in each block.)
• A : B+ Line.• B : B– Line.• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions. – CD board – no mark: CD PLAY – BT board – no mark: BLUETOOTH – IP board – no mark: iPod – Other board – no mark: TUNER (FM/AM) ( ) : CD PLAY [ ] : iPod < > : BLUETOOTH• Voltages are taken with VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production
tolerances.• Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production
tolerances.• Circled numbers refer to waveforms.• Signal path. F : AUDIO f : TUNER (FM/AM) J : CD PLAY O : iPod E : BLUETOOTH IN j : BLUETOOTH OUT h : AUDIO IN• Abbreviation AUS : Australian model CND : Canadian model SP : Singapore model
For Printed Wiring Boards.Note:• X : Parts extracted from the component side.• Y : parts extracted from the conductor side.• f : internal component.• : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.)
Caution:Parts face side:(SIDE A)Pattern face side: (SIDE B)
Parts on the parts face side seen from the pattern face are indicated.Parts on the pattern face side seen from the parts face are indicated.
Note: The components identi-fi ed by mark 0 or dotted line with mark 0 are criti-cal for safety. Replace only with part number specifi ed.
Note: Les composants identifi és par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le nu-méro spécifi é.
• Indication of transistor.
C
BThese are omitted.
E
Q
C EBThese are omitted.
• Circuit Boards Location
BT board (BX50BTi)
MAIN board
9VREG board
5VREG board
AMP boardIP board
TOP KEY board
ANT board (BX50BTi)
PANEL board
POER board
MOTOR board
HP board
CD board
VOL SELECT board (BX20i: Singapore model)
Caution:Parts face side:(Conductor Side)Pattern face side: (Component Side)
Parts on the parts face side seen from the pattern face are indicated.Parts on the pattern face side seen from the parts face are indicated.
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2626
6-5. PRINTED WIRING BOARDS - CD Section - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
R150R149R148
R108
R154
R153
C148
C110
C109
C301
C303
C302
C104
R110
C116
C404
R203R204R205R206R207R208
R209R210
R219
R223R222
R147 R221
R218
R146 R145
C150
R113
C403
R202
C151
C108
C105
C147
C146
C145
C152
C118
C117
C144
C101
C125
CN20
1
C143
C120
R144
R157
C142
C141
C140
C100
C107
R408
R156
C124
C127C126
CN301
R101
C119 C1
02
R415
R414
C103
R405
C113
R102
R402
R105
R106C132
C138
C137
R135
R134
R136
R130
R128
R129
R143
R139
C136
R120
R114
C153
C112
R125
R126
C149
C139
R127
R118
R140
R151
C122
C123
R220
R104
S201
R155
C128
C106
C201
R304R3
02
C309
C205
C207
C307
R303
C133
R111
R112
C115
R211
Q301
R301C2
04
C202
C206
C306
R212
C401
C130
C405
IC20
1IC401
IC101
R201
R142
CN001 S001
CD BOARD (COMPONENT SIDE)
CD BOARD (CONDUCTOR SIDE)
3
1
4
5
1 7 8 14
28 22 21 15TP124(VC)
TP121(RFI)
1 25
26
50
5175
76
100
1
21
AMAIN
BOARDCN305
161
1-872-135-
11
(11)
1-872-135-
11
(11)
OPTICAL PICK-UP BLOCK(KSM-213DCP)
A
B
C
D
E
F
G
1 2 3 4 5 6 7 8 9
E
(LIMIT)
M401(SPINDLE)
M402(SLED)
M
M
1-866-548-
21
(21)
MOTOR BOARD
KMAIN BOARD
CN311
DISC TRAYOPEN/CLOSE
DETECTOPEN CLOSE
M
M001(LOADING)
X102
(Page 32)
(Page 32)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2727
6-6. SCHEMATIC DIAGRAM - CD Board - • See page 42 for Waveforms. • See page 42 for IC Block Diagrams. • See page 45 for IC Pin Function Description.
R108R154
R153
C201
R304
R201
R110
R303
R203
R204
R205
R206
R207
R208
R209
R210
R219
R223
R222
R221
R218
R112
R202
R211
Q301
R301
C202
R157
TP121 (RFI)
TP124 (VC)
R156
CN301
R10
1
C401R415
R102
R12
8
R129
R143
R142 R139
R114R140
R15
1
R220
R150
R212
IC101
R105
R10
6
R125
R126
R127
IC201
X102
C301
C307
C309
C100
C13
8
C153
C151
C204
C13
0
C12
8
C11
3
C12
7C
126
C103
C10
2
C120
C118
C117
C101
C12
4C
125
R145
R146
R147
R148
R149
C149
C105
C143
C146
C145C148
C104
C405 C404 C403
C205C116
C133
CN201
C110
R113
R111
C115R155
C109
C132
R104
C123
C122
C139
C150
R136 R135
R134 C112 C108R120
R118
C136C107
R130
R144
C144
C147
C140
C137
C141
C142
C106
R302
C306
C303C302
R405
R402
R408
R414
C207
C152
C206
IC401
01M
1M
10010V
2.2
0
10k
2.2
100
100
100
100
100
100
100
100
100k
100k
100k
100k
100k
100
0
100
2SA2119K
100k
10010V
100
100
16P
220
22010V47k
10k
470k
1k
47k
22k 47k
10k0
0
100k
0
TK63115SCL-G@GT
0.1
1
0.001
0.1
470p
0.1
470p
0.1
0.1
0.00
220.
1
0.1
0.1
0.01
0.01
0.022C1190.022
0.1
0.00
470.
0047
0
0
0
0
0
22p
0.1
0.01
470p
0.01
47p
0.1
0.1 0.1 0.1
0.1
0.1
0.1
0.1
10k
100
226.3V
47
0.1
0.1
0
470p
470p
0.01
0.001
22k 470k
1M 0.1 0.1
47p0.1
4.7k
22k
0.1
0.1
0.01
0.01
0.0022
0.1
10010V
0
10010V
1010
10k
2.2k
2.2k
4.7k
1
470p
1
BA5826SFP-E2
SP-
SP+
SL+
SL-
100
1M 1k
0
0
0
16.9344MHz
TC94A70FG-006 (D, HZ
5p
5p
21P
0
100k
IC101CD-MP3 PROCESSOR
IC401FOCUS/TRACKING COIL DRIVE,SLED/SPINDLE MOTOR DRIVE
IC201+1.5V REGULATOR
SP-
SP+
SL+
SL-
M401(SPINDLE)
M402(SLED)
AUTOMATIC POWERCONTROL
S201(LIMIT)
IC B/D
AMAIN
BOARD(1/3)CN305
32
31
IC B/D
OPTICALPICK-UPBLOCK
(KSM-213DCP)
M
M
(Page 33)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2828
6-7. PRINTED WIRING BOARDS - BLUETOOTH Section - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
IC904
CN903 CN902
FB907 C905
C958
C906
C904
C951
C953
C952
C954
C930
C929
C928
C927
C907
C966
C965
C903
IC903
C912
C908
CN901
FB90
3
FB90
4
FB91
4
FB91
3
FB905
C942
C922
C921
JR902
C901
C902
C941
R938
R939
R940
R966
R913
R937 R935
R936
R900
FB906
R955
R957
R953
R963
C957R915R9
16
R918
R917
D902
D901
R965
R932
R934
C926
R930C924
R922
R926
R924
R928
C932
IC902
R954
R964
R959
R961
R960
R962
R956
R958
R952
R951
R945
C945
R947
R943
R949 R967R941
IC901
R950
R971
R970
R969
R908
R948
C946
R946
R944 R974
R973
R972
R907
R942R968
R910R911
R909R914
R921
C923
R929C925
R925R923C931
R927
R931
R933
R901
R902 R9
03 R904 R9
05
R906
FB90
8
FB90
9
FB91
0FB911FB901
FB902
C914
CN904
B MAIN BOARDCN323BT BOARD (SIDE A)
1-873-212-
11
(11)
1161
125
5026
6
3
5
4
(NC)(NC)
BLUETOOTH MODULE
BT BOARD (SIDE B)
1-873-212-
11
(11)
KA
A
KA
A
ANT BOARD
1-873-213-
11
(11)
ANT901PATTERNANTENNA
(FOR BLUETOOTH)
A
B
C
D
E
F
G
1 2 3 4 5 6 7 8
(Page 32)
Note: IC904 on the BT board cannot exchange with single. When IC904 on the BT board is damaged, exchange the entire mounted board.
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
2929
6-8. SCHEMATIC DIAGRAM - BLUETOOTH Section - • See page 42 for IC Block Diagrams.
FB905
R901
R902
R903
R904
R905
R906
CN901
FB913
FB914
FB904
FB903
FB902
FB901
FB908
FB909
FB910
FB911
C921
C922
R941
R974
R973
R972
R907
R967 R943
R944
R949R945C945
R955
R957
C966
R948
IC901(1/2)
IC901(2/2)
C946 R946
C965
R947
R968R942
R950
R963
R953
R951
C953
R956
R958
R952
C954
R964
R954
R921
R922
R925R929
IC902(2/2)
R908
R971
R970
R969
C931
C923
R923
R909
R911
R910R914
IC902(1/2)
C932
R924
R926
R930C924
R928
R927
C925
C926
R931
R933C929
R932
R934
C928
C902
R962
R960
R961
R959
D901
C901
IC903
C903 C904
C905 C957
FB907FB906
R91
8
R91
7
R91
6
R91
5
D902
R936
R937
R900
R935
CN902
R938
R939
R940
R966
CN903
JR902
C908C907
C927
C912
R965
C958
C941
C942
C951
C952
C930
C906
R913
IC904
CN904
C914ANT901
0
100
100
100
100
100
100
15P
0
0
0
0
0
0
0
0
0
0
1 50V
1 50V
100
470
470
470
470
100k 100k
100k
1k100k22p
100k
1M
0.2250V
47k
NJM14558V-
NJM14558V-
22p 100k
0.2250V
47k
100k100
1k
100k
47k
1k
150V
100k
1M
1k
150V
100k
47k
100
100
2204.7k
NJM14558V-
470
470
470
470
470p
470p
220
2.2k
0
2.2k0
NJM14558V-
470p
220
220
4.7k470p
4.7k
4.7k
0.0047
0.0047
4.7k
4.7k2.250V
4.7k
4.7k
2.250V
0.1
100
100
100
100
MC2838-T11
2216V
XC6213B332MR
0.1 4.735V
22p 22p
0 47k
47k
47k
47k
MC2838-T11
100
100
100
100
6P
100
100
100
100
6P
0
4716V
4716V
2.250V
4716V
100
22p
0.2250V
0.2250V
150V
150V
2.250V
0.1
47k
BLUETOOTH MODULECXN1404-3BGL
2p
ROLE
TXD
CTS
RXD
RTS
RT
S
TX
D
RX
D
CT
S
TXD
RXD
RTS
CTSROLE
DGND
AVDD5V
VCC
UART_TXD
UART_RXD
UART_/RTS
UART_/CTS
GND
GND
VCC
SPI_MOSI
SPI_MISO
SPI_CLK
SPI_CSB
AOUTR
AGND
AOUTL
AGND
(BT_AV_ROLE)
AINL
AINR
VIN
VSS
CENC
VOUT
GN
D
A-I
N_
N_
R
A-I
N_
P_R
A-I
N_
N_
L
A-I
N_
P_L
GN
D
A-O
UT
_N
_R
A-O
UT
_P
_R
A-O
UT
_N
_L
A-O
UT
_P
_L
GN
D
PIO
-00
PIO
-01
PIO
-03
PIO
-04
PIO
-06
PIO
-07
PIO
-08
PIO
-09
PIO
-10
PIO
-11
RS
V
GN
D
PIO
-05
PIO
-02
GN
D
VD
D
VD
D
VD
D/V
RE
F
SP
I_M
OS
I
SP
I_C
LK
SP
I_M
ISO
SP
I_C
SB
US
B_
VB
US
US
B_
DP
US
B_
DN
PC
M_
CL
K
PC
M_
SY
NC
PC
M_
IN
PC
M_
OU
T
AIO
-00
AIO
-01
AIO
-02
AIO
-03
GN
D
DVDD5V
(BT_TXD)
(BT_RESET)
(BT_RTS)
(BT_RXD)
(BT_CTS)
+3.3V REGULATOR
MIX AMP
12
38
7
4
5
6
LINE AMP
(NC)
(NC)
UA
RT
_C
TS
UA
RT
_R
TS
UA
RT
_R
XD
UA
RT
_T
XD
RE
SE
T
PATTERN
ANTENNA(FOR BLUETOOTH)
12
3 8
4
5
67
(Page 34)
Note: IC904 on the BT board cannot exchange with single. When IC904 on the BT board is damaged, exchange the entire mounted board.
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3030
6-9. PRINTED WIRING BOARD - IP Board - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
30 1
E E Q102
Q103
Q104
Q105
Q106
R101
R102
R103
R104
R105
R106
R107
R108
R109
R110
R111
R112R113
R114
R115
R117
R118
CN10
1
CN102
R122
R132
R135
R136
R137
R138
R139
C101
C102
C103
R140
C104
R141
C105
R142
R143R144
C108
C109
R146
R147 R148
R149
C111
X101
R150
C114
C115
C118C119
C120
D102
D104
IC101
IC102
IC103
E E
X101
IP BOARD (SIDE A) IP BOARD (SIDE B)
1-876-184-11
(11) 1-876-184-11
(11)
CMAIN BOARD
CN325
(iPod)
110 E
1
3 4
51
3 4 52 40
14
A
K
26
39
27
1
13
2
AK
A
B
C
D
E
1 2 3 4 5 6 7 8 9 10
(Page 32)
Ref. No. Location• Semiconductor Location
Ref. No. Location D102 C-4 D104 B-3
IC101 B-4 IC102 A-3 IC103 A-4
Q102 E-2 Q103 E-1 Q104 C-2 Q105 C-1 Q106 B-3
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3131
6-10. SCHEMATIC DIAGRAM - IP Board - • See page 42 for Waveforms. • See page 42 for IC Block Diagrams. • See page 45 for IC Pin Function Description.
MAIN
C(3/3)
CN325
BOARD
21
IC B/D
5.14.9
3.41.3
5.1
3.4
4.7
0
0
-1.1
-1.1
0
0
-1.1
-1.1
3.4
3.4
3.4
3.3
3.33.
4
3.2
3.4
1.6
3.4
3.4
3.4
1.7
1.7
3.4
3.4
3.4
-1.1 3.4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
30PCN102
DGND
DGND
TPA+
USB D+
TPA-
USB D-
TPB+
VBUS
TPB-
ACC ID
PWR+
PWR+
ACC PWR
RESERVED
DGND
DGND
RESERVED
RXD
TXD
ACC DET
S-VIDEO-Y
S-VIDEO-C
VIDEO-OUT
REMOTE SENSE
LINE-IN-L
LINE-IN-R
LINE-OUT-L
LINE-OUT-R
A-GND
DGND
5
43
2
1
TK11133CSCL-GIC102
CONT
GND
NP VOUT
VIN
10C108
6.3V470
C109
4
3
1
2
PST3641ULIC103
GND
VDD CD
OUT
16V10
C114
16V10
C115
CL109
CL102
CL103
CL104
CL105
CL106
CL107
CL108
CL110
CL111
CL112
CL113
CL115
CL116
CL118
CL120
RT1P141M-TP-1Q106
CL122CL123
CL125
CL124
CL130CL132
CL133
CL137
CL138
CL139
CL140
CL141
CL142
CL143
CL144
CL145
CL146
CL147
CL148
CL149
CL150
CL151
CL1
52
CL153CL154
CL155
CL156
CL135
0.1C104
0.1C102
0.1C103
C1010.1 0.1
C120
0.1
C11
1
0.1C118
100kR107
100kR108
100kR109
100kR110
75kR106
75kR111
220kR112
330kR113
100R114
100R115
100R102
100R101
100R136
100
R14
9
100R103
100R104
10kR122
10kR132
10kR135
R14610k
100kR140
100kR139
100kR148
100kR147
1kR141
R1431k
R1441k
1kR142
10kR105
1000pC119
0.22C105
0R118
33kR117
100R138
100R137
20MHzX101
10kR150
2SD
2114
KT14
6WQ
102
2SD2114KT146WQ103
2SD
2114
KT14
6WQ
104
2SD2114KT146WQ105
27 28 29 30 31 32 33 34 35 36 37 38 39
41
42
43
44
45
46
47
48
49
50
51
52
345678910111213
17
18
19
20
21
22
23
24
25
26 40
2
15
16
14
1
R5F21246SN060FPIC101
NC
SCL
P33
SDA
MO
DE
P34
P44
RES
ET
XOU
T
VSS
XIN
VCC
LED
LED
LED
P23
P22
P21
P20
P17
P16
RXD_iPod
TXD_iPod
P13
NC
AC C
UT
RXD
_DM
PORT
P12
P11
P10
P31
P30
P65
VID
EO_M
UTE
AUD
IO_M
UTE
P07
NC
NC
P04
VREF
P60
DETECT
P61
MODEL
DEST
KEY1
KEY0
P37LED
TXD
_DM
PORT P06
P05
RB521S-30-TE61D102
1
2
3
4
5
6
7
8
9
10
10PCN101
PGND
VBUS 5V
RXD
TXD
L-
L+
R-
R+
SHIELD
DETECT
RB521S-30-TE61D104
+3.3V REGULATOR
IC102
Q102-105MUTING
RESET SIGNAL GENERATOR
IC103
MUTING CONTROL SWITCH
IC101iPod INTERFACE
(iPod)
IP BOARD
9
E
6
G
1
D
3
A
4 5
C
8
F
B
H
72
(Page 35)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3232
6-11. PRINTED WIRING BOARDS - MAIN Section - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
JW21
7
CN32
1
CN30
3
C309
C115
C110
C215
C118
C210C2
18
C331
CN323
C389
C214
C114
C395
C220
C120
JW47
4JW
475
JW31
2
C367
JW39
8
JW39
5
JW39
7
JW40
6
JW40
2
JW43
2
JW40
1
JW43
8
JW304
JW369
JW363
JW33
0
JW32
5
JW32
7
JW31
5
JW44
2
JW37
3
JW43
1
JW43
5
JW48
9JW322
JW324
C369
JW376
JW333
JW334
JW34
1
JW34
3
JW32
8
JW336
JW361JW486
JW45
6
JW371
JW372
JW487
JW370
JW34
0
JW33
9
JW46
3
JW40
3
JW40
0
R153
JW43
6
JW43
0
JW43
3
JW393
JW358
JW365
JW364
EP302
JW46
5
CN309
JW450
C364
JW349
JW47
2
JW469
JW464
C386
C352
C344
JW48
0
JW481
JW451
C303
JW37
7
JW48
2
JW483
JW45
9
C301
JW360
JW45
8
JW44
6
JW470
JW43
4
JW45
7
JW47
6
X302
JW31
0
D321
JW368
JW485
CN310
1
2 8
9
C350
JW306
JW33
1
JW33
2
CLP311JW
429
JW40
5
R253
D318
L101
C379
JW359
J302
C351
CN31
2
JW32
6
JW42
8
EP301
JW34
2
D323
JW31
6
JW488
JW471
C126
JW39
9
JW34
7
C127
C226
C102
JW348
JW30
1
C116
C227
JW354
JW40
4
JW317
JW33
7
JW305
C394
C216
JW323
JW37
9
JW33
5
JW30
3
JW30
2
JW31
4
JW34
5
C363
JW34
4
JW479
JW44
4
JW42
3
JW31
3
C319
JW44
3
CN311
CN305
121
202
JW44
5
JW388
X301
C336
JW40
7
JW321JW
439
JW46
0
JW44
1
JW35
3
JW45
4
C371
C375
C377
JW41
0
JW366
JW30
8
JW48
4
CN30
6
JW38
4
JW389
CN31
6L2
01
JW478
JW30
7
JW43
7
JW394
IC311
JW47
3
IC307
JW30
9
JW39
6
JW387
JW329
JW417
JW42
5
C208
C202
JW350
JW44
0
C108
JW357
JW37
4
JW367
JW416
JW41
5
D331
JW385
JW45
5
JW42
4
JW41
8
JW42
0
JW41
9
JW49
0
JW40
8
JW41
2
JW452
JW386
Q392
R314
CN32
2
JW382
JW42
7
JW42
6JW390
JW38
3
JW37
8
JW392
JW42
1
JW42
2
R308
R312
JW40
9
JW41
1
JW41
4
JW38
0
C391
CN325
JW338
JW41
3
JW391
JW38
1
CN30
1
JW47
7
JW467
JW34
6
JW447
JW355
JW362
JW352
JW356
C324
Q390
JW46
1
JW31
8
JW31
1
JW46
2
JW44
8
JW466
JW468
JW351
JW37
5
Q304
C365
CN313
C387
Q317
C307
C304
A A
K
CN314
IC305
C325C335
R116
R216
R775
IC309
R744
C308
R115
R114
R113
R112
R111
R107
Q310
R207
R108
R208
R211
R212
R213
R214
R215
R452
R455
R456
R479
R745
IC312
C382 Q319
Q320
R119
R120
R121
R219R220
R221
R359
R360
R361
R362
R453
R704
Q312
JR49
8
JR317
JR31
8
JR31
9
JR34
5
JR334
D325
R473
Q203
JR313C368
IC304
R234
R134
D330
D329
R303
JR330
JR324
R104
R204
R110
C499
R210
C109
C498
Q345
JR336
JR33
7
JR33
5
R703
R131
R702
JR341
JR315
JR34
0
C209
JR33
3
R770R7
68
R769
R760
R231
R757
R785
R784
R786
C230
R766
R773
JR30
3
JR312D320
Q342D319
R783 R782
R781
JR30
1
R778
R777
R705
IC201
R789
R774
R792
R791
R793
JR31
4
JR33
2
R722
R724
R746
R741
R734
R733 R732R731
R728
R727R726 R725
R747
R748
R720
R719
JR30
8
R717
C130
R716
R711
R709
R706
R759
C101
C103
C104C111
C113
C117
C119
C122
C123
C125
C201
C203
C204
R309
C211
C213
C217
C219
C222
C223
C225
D313
JR302
C766
C337
JR309
JR30
7
D302
D303
JR34
2
D304E
C359
D309
R109
R713 Q103
IC301
JR320
R302
JR325
C366
IC310
C362
C361
D322
D332
IC303
C355
JR211
C348
JR101
JR107
JR20
1
JR21
3
JR20
7
C342
C341
C340 C339
C338
Q341
Q340
Q338Q333
JR214
C333
(NC)
Q307
JR21
9
C330
Q315
Q316
JR221
JR331
JR222
Q343 Q344
Q347
Q348
JR22
3
R209
R101
R102
R103
R105
R106
JR316
C316
R117
R122 R123
R124
R125 R126
R129
R130
R201
R202
R203
R205
R206
JR30
4
JR30
6JR
305
R217
R222 R223
R224
R225
R226
R227
R229
R230
Q313
C311
C310
Q301
C305
JR329
R345
R347
R348
R349
C302
JR322
Q302
R409
R410
R411
Q303
R413
R416Q305
R419
R420
R421
Q306
JR32
6
Q309
R425
R427
R428
JR32
7JR
328
R431
JR32
1
R435
R436 R439
JR344
R441
JR343
R449
R450
R458
R459
R460
R461
Q393
R463
R469
R470
R471
R475
R415
R478
R481
R482
R484
R301
R307
R487
R488
R489
R315
R495
R496
R498
R317 R500
R511
R600
R611
R344
JR32
3
R356R364
R396
R403
R404
R406
R407
R408
R412
R414
R128
R417
R418
R448
R447
R429
R430
R432
R433
R424
R422
R753
R462
R464
R465
R466
R467
R468
R472
R477
R780
R485
R486
R492
R493
R494
D774
R700
R701
R228
R311
R313
R316
C132
C232
CN324
D305
IC306R4
37
R401C373
C380
MAIN BOARD
EPANELBOARD
FTOP KEYBOARDCN802
KMOTORBOARDCN001
CD BOARDCN201A IP BOARD
CN101C BT BOARDCN901B
K K
A
1
4
1 9
E E
E
E
E
E E
E EE
A
K K
E
K K
A
E
E
AMP BOARDCN308
D
E
E
E E
3 1
E
E
K K
A
E
EK A
A/K
KA
K/AE
E
J H GHP BOARD
CN317AMP BOARD
CN320POWER BOARD
CN904
(CHASSIS) (CHASSIS)
11 10
3
4 5
1
6
1
5
1
8
1
12
E
E
EE
E
E
E
1-876-051-
1-876-057-
11, 12
13
1 3(11, 12)
9VREG BOARD
(BX50BTi)(BX20i)
(BX20i)
5 4
1 3
(BX50BTi)
TUNER (FM/AM)SUPPLIED WITH THEASSEMBLED BLOCK
ANTENNA
M901(FAN)
AMFM 75 COAXIAL
M
(BX2
0i)
(BX20i)
(BX50BTi)
(BX50BTi)
R
L
SPAEKER
(BX50BTi)
(BX2
0i)
(BX50BTi)
(BX2
0i)
(BX50BTi)
1-876-058-
11, 12
13
1 3
(11, 12)
5VREG BOARD
(EXCEPT BX20i: SP)
11, 12
(11, 12)
A
B
C
D
E
F
G
H
I
J
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
(Page 26)
(Page 38)
(Page 38)
(Page 26) (Page 30) (Page 28)
(Page 36)
(Page 40)
(Page 36) (Page 36)
Ref. No. Location• Semiconductor Location
Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D302 H-4 D303 H-3 D304 C-7 D305 J-11 D309 F-2 D313 D-15
D318 B-8 D319 E-12 D320 E-13 D321 B-9 D322 H-7 D323 E-12
D325 H-8 D329 H-6 D330 G-11 D331 H-6 D332 G-13 D774 C-3
IC201 B-8 IC301 E-3 IC303 B-11 IC304 D-11 IC305 J-13
IC306 J-11 IC307 G-11 IC309 F-9 IC310 F-2 IC311 B-2 IC312 D-14
Q103 E-10 Q203 G-10 Q301 F-3 Q302 C-6 Q303 B-6
Q304 H-5 Q305 H-4 Q306 H-5 Q307 C-15 Q309 F-2 Q310 F-11
Q312 G-3 Q313 G-3 Q315 H-13 Q316 D-15 Q317 B-15 Q319 D-14
Q320 C-14 Q333 H-7 Q338 H-7 Q340 G-11 Q341 G-11 Q342 E-13
Q343 E-13 Q344 E-13 Q345 E-13 Q347 C-15 Q348 C-16 Q390 C-7
Q392 C-6 Q393 C-7
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3333
6-12. SCHEMATIC DIAGRAM - MAIN Section (1/3) - • See page 42 for IC Block Diagrams.
R315
CN309
R209
C371C375
R217C116 C216
R128 R228
C369
C368
C367
IC304
Q203R234
R134R227
Q103Q341
R345C208
C132
C111
C23
2
C211
R225
C230
C130
C213
C113R226
R126R125
C203C103C202C102C201C101
R124 R224
C391
C361
C355
Q392
R344 R364
Q303
Q302
R308 R396
Q393
R317
R356C324
D304
C319
D330
C104 C204
JR107
JR207
R219
R221
C389 C382 C395
R220C
114
C120 R121
R120 R453 R361 R360 R359
Q340
C108
R307
JR214
JR219
JR213
JR211
JR223
JR222
JR221
R203
R103
R102
R202
IC312
R312
R314
R117
R109
C379
C377
JR201
JR101
R119
C348
Q390
R101R201
Q319
CN305
C330
C217
C117
C394
C214 C220
R362
Q320
100k
7P
4.7k
0.10.1
47k4.750V
4.750V
1k 1k
1016V
0.1
47016V
BD3499FV
2SC59384.7k
4.7k22k
2SC5938RT1P441C
47k2.250V
0.0022
0.0047
0.00
22
0.0047
22k
470p
470p
470p
470p
22k
22k22k
11150V
150V
11
22k 22k
470 10V
0.1
0.1
KTC3203Y-A
100 100
RT1P441C
RT1N141C
47 22k
ISA1235AC1TP
47k
47k10016V
UDZW-TE17-3.9B
22010V
MA2J1110GLS0
1 1
0
0
100K
100K
10016V
0.1 2.250V100K
150
V
150V
100K
100K100 2.2K 10K 10K
RT1N141C-TP-1
2.250V
1k
0
0
0
0
0
0
0
47k
47k
4.7k
4.7k
MC14052BDTR2
47
47
47k
4.7k0.1
0.1
0
0
100K
0.1
KTC3205Y-A
RT1N141C-TP-1
21P
0.1
470P
470P 2.250V
150V
150V
2.2K
RT1N141C-TP-1
A1
A2
A3
A4
A6
A7 A8
A10A9
C1
C2
C3
C4
C5
1
2
3
TU
NE
R/D
AB
/BT
RX
_R
TU
NE
R/D
AB
/BT
RX
_L
CD
/US
B_L
CD
/US
B_R
BT
RX
_L
BT
RX
_R
TU
NE
R_
R
TU
NE
R_L
59
39
66
40
22
24
68
69
70
23 53
57
60
19
CD/USB_L
CD/USB_R
BT FUNC OUT_L
BT FUNC OUT_R
BT SELEC OUT_R
BT SELEC OUT_L
AIN
_L
AIN
_R
TU
NE
R/D
AB
/BT
RX
_L
TU
NE
R/D
AB
/BT
RX
_R
IPO
D_L
IPO
D_R
100
L-IN
R-IN
AGND
STBY
±PRE
INH
VE
E
GN
D
VC
CY
0
Y2 Y Y3
Y1
BA
X3
X0X
X1
X2
NC
MNT
AVDD(3.3V)
CD DRIVE MUTE
MGND
VM(7V)
DVDD(3.3V)
D-OUT
DGND
SBSY
REQ
BUCK
BUS3
BUS2
BUS1
BUS0
AGND
L-OUT
DACGND
R-OUT
CCE
RST
(1/3)
ELECTRICAL VOLUME,SURROUND/
TONE CONTROL
MUTINGCONTROL
Q340,341
SWITCH
MUTING
MUTING
VOLTAGE
DETECT
INPUT SELECTOR
Q302,303,390,392
R101,2012.2K
4.7K
(BX20i)
(BX50BTi)
(BX20i)
(BX20i) (BX20i)
ZDET/LRCKIN
INPUT SELECTOR,
(BX50BTi)
INVERTER
INVERTER
REGULATOR+3.3V
(Page 27)
(Page 34)
(Page 37)
(Page 35)
(Page 35)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3434
6-13. SCHEMATIC DIAGRAM - MAIN Section (2/3) - • See page 42 for Waveforms. • See page 42 for IC Block Diagrams. • See page 45 for IC Pin Function Description.
IC301
D318
D321
CN322
R408
R301
R462
C338
C364
R472
R477
C366
R467
R468
IC311
C339
C342
R466
R465
D30
9
C341 C340C301
IC310
D323
R430
R429
R424
R422
R72
6
R728
R72
7
R72
5
R72
4
R72
2
R72
0
R71
9
R464
R71
7
R71
6
C31
6
R71
3
R412
C310
C311
C333
R70
9
R71
1
R70
6
R70
5
R70
4
R70
3
R70
2
R701
C499JR498
R700
R792
R793
R791
R789
R781
R782
R783
R784
R785
R492
R493
R494
C498
R786
R487
R488
D774
R780 R778 R77
7
R77
4 R766
C766
R485
C362
R760 R75
9
R75
7
R753
R748
R747
R746
R741
R734
R733
R732
R731
CN301
CN311
CN306
R473
R773
R448
R745
R744
R433R432
X301
R418
Q309
R111
R113
R112 R452R455
Q310C309C331
R213R211
R212
C308
IC309
C115
R611
R511
R600
R500
R114
R115
R216R116R208
R10
8
R20
7
R10
7
CN323
C344
C215
S001
CN310
R214
R215 R479
C110
C118
C218
C210
R456
Q301
R40
7
X302
R486
R77
0
R76
9
R76
8
R447
R5F3640DDFA
1N4002-B5
1N4002-B5
4P
2.2k
5.6k
1k
0.1
10 50V
1k
1k
0.1
4.7k
4.7k
BA6956AN
0.1
0.1
47k
47k
MA
2J11
10G
LS0
0.1 0.14.750V
PST3628NR
1N4002-B5
4.7k
4.7k
4.7k
4.7k
100
100
100
100
100
100
47k
100
10k
10k
0
0.1
0
10k
22p
22p
0.1
10k
220k
100
100
100
100
100
100
0.10
100
100
100
100
1k
100
100
100
100
100
10k
10k
10k
0.1 10k
10k
MC2836
100 100
100
1M
220k
0.01
100k
0.1
100
100
100
100
100
100
10k
10k
100
100
100
100
9P
5P
13P
10K
100
4.7K
100
100
4.7K4.7K
32.768KHz
0
2SC3052F
100K
100K
100K10K
2.2K
RT1N141C-TP-1INVERTER
10016V
2.250V
100K100K
100K
0.1
MC14052BDTR2
150V
4.7k
4.7k
22k
22k
47K
100K
100k100k47k
47k
4.7k
4.7k
15P
0.22F 5.5V
150V
9P
47K
100K 100
4.7 50V
4.7 50V
4.7 50V
4.7 50V
2.2k
2SC3052F
0
5MHz
100
100
100
4.7K
A1
A2
A3
A4
A6
A7
A8
A9
A10
B1
B2
B3
B4
B11
B10
B9
B8
B7
B6
B5
77
78
92
93
33
40
68
69
70
88
89
100
4 19
91
4
39
TUNER_L
TUNER_R
45
BT SELEC OUT_L
BT FUNC OUT_L
BT FUNC OUT_R
BT SELEC OUT_R
1 2 3
6
6 22
24
25
25
26
26
27
27
28
28
31
32
34
43
83
82
818
0
59
89
88 85
85
66
53
44
57
60
93
91
92
84
87
87
90
90
84
83
82
81
73
44
33
31
34
32
45
43
5
BT RX_R
BT RX_L
31
34
33
32
9
12
5 9 12 23
94
∗
INH
VE
E
GN
D
VC
CY
0
Y2
Y Y3
Y1
BA
X3
X0X
X1
X2
VC
O+
O-
VM
VCC
I+
I-
GND
GND
DGND
KEY3
KEY2
KEY1 RETURN
SIRCS
EVER 3.3V
STBY LED
DGND
FL DATA
FL CLOCK
FL GND
4V
FL CS
KEY1
KEY1 RETURN
GND
RXD
BUSY
VDD
SCLK
TXD
PGM
RST
GND
DO
/ST
ER
EO
ST
CL
K
ST
DIN
TU
NE
D
AG
ND
R O
UT
+9
V
L OUTST
CE
AIN
L
AG
ND
AIN
R
AO
UT
R
AG
ND
AO
UT
L
AV
DD
5
DV
DD
5
DG
ND
(BT
_R
ES
ET
)
(BT
_T
XD
)
(BT
_R
TS
)
(BT
_R
XD
)
(BT
_C
TS
)
(BT
_A
V_
RO
LE
)
CLOSE SW
OPEN SW
DGND
CLOSE
OPEN
SPEC IN
VREF
CDM LOAD OUT
CDM LOAD IN
CDM SW(OPEN)
CDM SW(CLOSE)
FL SCLK
FL CS
FL SD
STANDBY LED
KEY3
KEY2
KEY1
FL RESET
NC
NC
SIR
CS
BY
TE
XC
IN
XC
OU
T
RE
SE
T
XO
UT
XIN
NM
I
AC
CU
T
RD
S I
NT
SB
SY
ST
CL
K
ST
DA
TA
OU
T
CD
BU
S2
CD
BU
S1
CD
BU
S0
RD
S D
ATA
ST
CE
DA
TA
IN
/ST
ER
EO
DA
TA
TU
NE
R T
UN
ED
IIC
CL
KII
C
AM
P D
ATA
AM
P C
LO
CK
TA
LIN
E M
UT
E
ST
BY
-RE
LA
Y
NC
DAB RXD
USB RTS
SEL A
DAB TXD
BT DOUT
BT DIN
BT_RTS
PULL UP
PULL DOWN
BT AUDIO OUT MUTE
BT CTS
USB TXD
USB RXD
BT_AV_ROLE
BT_RESET
INH
NC
NC
NC
NC
US
B C
TS
NC
US
B R
ES
ET
I-P
OW
ER
MO
NIT
OR
ST
K-O
N
CD
RE
SE
T
US
B P
OW
ER
NC
NC
NC
MO
DE
L I
N
CL
INK
_T
X_
DO
UT
CL
INK
_R
X_
DIN
DM
PO
RT
PO
WE
R
CD
ON
CD
DR
IVE
R M
UT
E
MP
3 IR
EQ
CD
CC
E
CD
CL
K
DE
C B
US
SE
L
NC
NC
KE
Y W
AK
E U
P
1.2
VNC
DA
B-P
OW
ER
3.3
VNC
NC
DA
B-P
OW
ER
BUS3CD
(2/3)
∗1k
4.7k(BX20i:US,CND/BX50BTi)
R786
(BX20i:AUS)
∗
∗0
4.7k(BX20i:SP)
R486
(EXCEPT BX20i:SP) SYSTEM CONTROLLER
RESET SIGNALGENERATOR
RESET SWITCH
OUTPUT SELECTOR
LOADINGMOTOR DRIVE
TUNER (FM/AM)
SUPPLIED WITH THE
AMFM 75Ω
COAXIAL
ANTENNA
FL RESET
+9V
DISC TRAYOPEN/CLOSE
DETECT
M001
(LOADING)
(BX50BTi)
ASSEMBLED BLOCK
AC DETECT
VC
C
VS
S
CN
VS
S
AVCC
AVSS
X5V FLAG
VS
S
VC
C
(BX50BTi)
(BX20i)
(NC)
(Page 39)
(Page 39)
(Page 29)
(Page 33)
(Page 35)
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3535
6-14. SCHEMATIC DIAGRAM - MAIN Section (3/3) - • See page 42 for IC Block Diagrams.
D332
R49
8
R48
9
CN316
C359C365
Q317R460
R459
R478
R428 R475
Q316R415D313
R469
C387
R481 R482
R484
C307R495R409
C304
C337
R349R348R347
Q348Q307 Q347
C219
C222
R253
L201
R230 R229
R153
C122
C119L101
C123 C225 C125R130 R129
Q338
C336
Q333
R427
R416C350
D322
R441
R450R449
R414
R417
D302
R403C305 Q305
R404C303
R406
Q306
Q304
Q343 D319
R458C351 R496
Q344
Q342
D320
D303 R439
R421
R463
Q313
R316
R313
R311
R436
R435 Q345
R470
R47
1
R461
R425
R41
3R
411
R41
0
R419R431
D329
IC307
IC305
C335C325
CN314
CN325 CLP311 EP301
CN313
C223
EP302
CN303
C363
IC201
R222C209
R223
C386
R210
R110
C12
7C126
R122
R12
3
R131
C109
R105
R106C352
R206 R104
R302
Q312
Q315 D325
IC306
R401
C373R437C380
CN324
CN312
R303
C30
2
D331
IC303
JW34
8
R309C227
R231
C226
R204
R205
R42
0
D305
CN321
M901
MC2836
2.2k
2.2k
8P
0.147016V
KTA1266GR47
47
10k
1k 4.7k
2SC3052F10kMC2838
100k
4716V
47 10220k
4716V10047k
4716V
1
1M22k470k
2SC3052F2SC3052F 2SC3052F
0.1
0.1
101/2W
4.7 4.7
101/2W
0.1
0.1
0.01 0.47 0.474.7 4.7
RT1N141C-TP-1
2250V
RT1N141C-TP-1
22k
47k1050V
MC2836
4.7k
2.22.2
47
10k
UDZW-TE17-3.6B
6800.01 2SC3052F
68010016V
220k
2SC3052F
KTA1266GR
2SC3052F MC2837
47k10016V
100k
2SC3052F
ISA1235
MC2837
MC2836 47k
10k
10k
ISA1235
100k
2.2k
47k
22k
2.2k 2SC3052F
100k10k
47k
100k
47k
4.7k
100k
47k47k
MA2J1110GLS0
KIA7809API
0.110016V
3P
10P
3P
0.01
12P10016V
R5523N001B-TR-F
22k1
22k
2225V
22k
22k
150
V
150V
22k
22k
22k
1
4.7k
47k4710V47k 4.7k
100k
RT1N441C
2SC3052F MA2J1110GLS0
TA7805S
470
0.1101
3P
6P
100k
0.1
1N4002-B5
NJM4558M-TE2
100
150V
22k
150V
4.7k
4.7k
47k
1N4002-B5
5P
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
C1
C2
C3
C4
C5
78
77
80
94
73
AIN_R
AIN_L
IPOD_L
IPOD_R
66
RELAY
ACDET
UNREG
UNREG GND
SUB GND
UNREG SUB
HP-L
HP-R
HPGND
SP-L
SP-R
AUDIO-IN R
GND
AUDIO-IN L
R-OUT
L-OUT
+B
GND
-B
USB UNREG
RX
D
TX
D
L+
R+L-
R-
PROTECT
+B
-B
GND
PG
ND
VB
US
5V
SH
IEL
D
(CHASSIS)
(CHASSIS)
USB UNREG GND
FAN+
GND
FAN+
(3/3)
DE
TE
CT
REGULATOR
+9VO
GI
(FAN)
FAN MOTOR DETECT
R
L
SPEAKER
Q307,347,348
Q316,317FAN MOTOR
DRIVE
POWERMONITOR
VBUS POWERON/OFF SWITCH
LINE AMP
Q342-344
DC DETECT
Q304-306
REGULATOR
B+ SWITCHQ312,313
DRIVERELAY
Q333,338
DETECTPROTECT
+5V REGULATOR
REGULATOR
+9V
OG
I
OG
I
VC
C
GN
D
J302
KIA7809API
(Page 34)
(Page 33) (Page 31)
(Page 37)
(Page 37)
(Page 41)
(Page 33)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3636
6-15. PRINTED WIRING BOARDS - HEADPHONE/AMP Section - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
CN317
JW501
J500
J301
JW50
5
JW502
R584
C131
R534
R537
R582
R585
C531R583
R233
R581
R586
R589
C581
R540
R539
R538
R588
R532
R533R536
R133
R232
R531
R535
C231
R132
R590
R587
C504
R544
R516
R518
R545
R504
R506
C524
R514
C525
C526
R508
C523
C528
R523
R502
R515
R546
R507
R503
R513
R501
R512
C502
C501
R505
R510
R509
R543
C527
C505
R524
R519
R517
R522
R521
CN308
C512JW589
JW58
5
JW58
6
JW588
C503
CN320
R541
R542
JW58
2
C529
C506
JW58
3
JW58
1
C511C519
JW584
JW58
7
IC601
18 1-876-056-
HP BOARD
G
PHONES
AUDIO IN
MAIN BOARDCN316
1-876-053-
11, 12(11, 12)
AMP BOARD
H MAIN BOARDCN321 D
1 5
MAIN BOARDCN309
A
B
C
D
E
F
G
1 2 3 4 5 6 7
11, 12(11, 12)
(Page 32) (Page 32)
(Page 32)
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3737
6-16. SCHEMATIC DIAGRAM - HEADPHONE/AMP Section -
CN320
C525R543
C529
R542
R544C526
R510
R512
R509
C523
R508
C506
R546
C503
R503
C524
R504
R507
R513
R515R545
C52
7C528R514
C519
C501 C505
C504R505C502R502
C511R521
C512 R506
CN308
R516R517R518R519
IC601
CN317R133
R233
C131
C231R232
R132
R537R538R539R540
R587R588R589R590R583
R582
R581
R533
R532
R531
J301
R54
1
R524
R523
R536
R535
R534
R586
R585
R584
C531 C581
R522
R501
J500
5P
0.0022
470k
10035V
100
470k
0.0022
2.2k
1k
47k
10p
1k
4725V
0
4725V
1k
10p
47k2.2k
1k
010k
2200
p
2200p1k
47010V
100p 100p
470p47k470p47k
1050V 470
10 50V 470
7P
STK433-730-E
8P1k
1k
470p
470p47k
47k
10k10k10k10k
10k10k10k10k
470
470
470
470
470
470
2.2k
2.2k
470
470
470
470
470
470
0.01 0.01
470
470
CH
21
IN
CH
2 N
F
ST
BY
CH
1 N
F
CH
1 I
N
MO
NIT
OR
SU
B
+P
RE
CH
2 O
UT
-
CH
2 O
UT
+-
CH
1 O
UT
-
CH
1 O
UT
+
+V
CC
-VC
C
-PR
E
R-OUT
L-OUT
+B
GND
-B
GND
STBY
MNT
NC
AUDIO-IN L
GND
AUDIO-IN R
HP-R
SP-R
HPGND
HP-L
SP-L
R-IN
L-IN
POWER AMP
R516,519
2.2K4.7K
(BX20i)(BX50BTi)
(BX20i)(BX50BTi)
R517,518
22k47k
AUDIO IN
PHONES
(Page 33)
(Page 35)
(Page 35)
• See page 42 for IC Block Diagrams.
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3838
6-17. PRINTED WIRING BOARDS - PANEL Section - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
Q902R9
28
R926
R927
C841
IC902
D915
R922
D905
R920
R919
Q901
C816
D904
R944
C919
C920
C917
C918
R934
R938
R937
R936
R935
R943
R942
Q903
Q905
C924
D807
C812
C811
R925
R921
C910
C908
R851
C907
FB90
1
R932
R933
R931
R929
R930
R852
C804
W801
W802
D903
S802
S803
IC901
C815
JW802
FL901
JW80
7
JW81
0
C814
L901
JW80
1
JW806
JW80
9
JW80
4
JW80
3
JW805 C805
JW81
1
C909
JW812
JW80
8
JW81
3
JW81
4
S801
D902
C838
R853
R854
R855
R856
R860
R861 R862
R863
R868
R864 R857
R869
R867
R865
R866
CN802
S807
S806S805
S804S812
S811
S813
S810S809
S814
S821 S820
S819
S818
S815
S816
S817
FLUORESCENT INDICATOR TUBE
PANEL BOARD
1-876-052-
11, 12
(11, 12)
E
E
1
13K
A A
E
1 3
E
2C 1C
12
3
4
56 7
8
9
A
K
A A
KK
1B2B
OPEN/CLOSE
BLUETOOTH OPR
BLUETOOTH OPR
(BX50BTi)
S801 – 803 EMAIN BOARD
CN306
T801DC/DC CONVERTER
STANDBY
POWER
(CHASSIS)
F MAIN BOARDCN322
1-876-055-
TOP KEY BOARD
ENTER
DSGXDISPLAY
FUNCTIONAUDIO IN(BX20i)
(BX50BTi)
(BX20i)
(BX50BTi)
+
+
–
VOL
14
TUNE –
–
TUNE +
PLAY MODE/TUNING MODE
REPEAT/FM MODE
CANCELCD
TUNER/BAND
iPodS804 – 807, S809 – 821
A
B
C
D
E
F
G
H
I
J
1 2 3 4 5 6 7 8 9 10 11 12 13
BLUETOOTH
(BX20i) (BX50BTi)
TUNER/BAND CD
11, 12
(11, 12)
(Page 32)
(Page 32)
Ref. No. Location
• Semiconductor Location
D807 C-12 D902 D-12 D903 B-1 D904 C-12 D905 C-12 D915 C-6
IC901 C-3 IC902 C-7
Q901 D-12 Q902 B-2 Q903 B-11 Q905 B-6
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
3939
6-18. SCHEMATIC DIAGRAM - PANEL Section - • See page 42 for IC Block Diagrams.
CN802
R856 R855 R854 R853
R868 R863 R862 R861 R860
R864R865R866R867R869R857
D915
R925
R921
C804
Q905R942
R943
IC902
C815
C917
C918
C919
C920C814
C816
R935
R936
R937
R938
R944
R934
C924
C910D807
R932 R933R931
C909
C908
D905
D904
C811 C812
L901
R930
R919
C907
Q903
R920
C805FB901
R929
Q902
Q901
D903
T801
S801S802
S803
R851 R852
S807 S806 S805 S804
S820
S818S815S816S817S819
S821
S811
S812
S813S814
S810 S809
FL901
R926
R927
R928
R922
D902
IC901
C841
4P
15k 10k 4.7k 2.2k
10k 4.7k 2.2k 2.2k 1k
1k2.2k2.2k4.7k10k15k
MC2838
470
47
1
2SC3052F10k
22k
PT6302
2250V
0.001
100p
100p
100p
2250V
47p
1k
0
0
0
1k
2.2k
100p
0.01UDZW-TE17-
6.2B
100 10010k
4750V
0.01
MC2838
MC2836
0.01 0.01
2.2k
0
0.022
CPH5504-TL-E
0
4725V
2.2
RT1N141C
RT1P441C
SELK5E200-DTP15
1k 2.2k
1K
1K
1K
47
SLR325VCT31P
NJL24H400A
0.1
54
55
53
52
53
54
55
57
57
52
1G
P1
P2
P3
P4
P5
P6
P7
P8
P9
P1
0
P11
P12
P1
3
P14
P1
5
P1
6
P17
P1
8
P1
9
P2
0
P2
1
P2
2
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
P36
P37
P1
P2
P3
P4
P5
P6
P7
P8
P9
P1
0
P11
P12
P1
3
P14
P1
5
P1
6
P17
P1
8
P1
9
P2
0
P2
1
P2
2
P2
3
P2
4
P2
5
P2
6
P2
7
P2
8
P2
9
P3
0
P3
1
P3
2
P3
3
P3
4
P3
5
P3
6
P3
7
2G
3G
4G
5G
6G
7G
8G
9G
10G
11G
1G
2G
3G
4G
5G
6G
7G
8G
9G
10G
11G
KE
Y1
RE
TU
RN
KE
Y2
KE
Y3
DG
ND
+3.3
V
GN
D
OU
T
SIRCS
EVER 3.3V
KEY1
KEY1 RETURN
DGND
FL RESET
+9V
FL DATA
FL GND
4V
FLUORESCENT INDICATOR TUBE
INDICATOR TUBEFLUORESCENT
LED
DRIVE
BLUETOOTHOPR
LEDDRIVE
STANDBY
REMOTE CONTROLRECEIVER
GRID DRIVE
DC/DCCONVERTER OSC
-1
-2
BLUETOOTHOPR
FL CS
FL CLOCK
STBY LED
(BX50BTi)
DISPLAY
VOL-
VOLTUNE - TUNE +ENTER
REPEAT/FM MODE
PLAY
TUNINGMODE
MODE/
DSGXCANCELFUNCTION-
CD BLUETOOTH
CD
BANDTUNER/
AUDIO INBANDTUNER/
(BX50BTi)
(BX20i) (BX20i)
(BX50BTi)
(BX50BTi)
+
+
2
3
4
6
5
1
9
7
8
DRIVER
(CHASSIS)
1
13
iPod
(Page 34)
(Page 34)
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
4040
6-19. PRINTED WIRING BOARD - POWER Board - • : Uses unleaded solder.• See page 25 for Circuit Boards Location.
C903C911
D907
D908
C905
R911
R910
R909
C902
R904
R906
C901
D922
R908
D906
D923
R905
R902
R901
D920
C906
C923C922
JW92
4
JW925
JW92
3
JW93
1
JW911
D924
JW91
0
JW914
JW92
9
FH903
JW90
9
C921
FH904
JW926
C914
JW927
C936
FH901 FH902
C925
D912
JW92
8
JW930
F901
T902
LF901
RY901
D916
D918
CN904
D925
T901
D927
JW920
D926
F902
D914
D911
D913
CN901
D917
D919
JW93
4
JW933
JW93
5
CN905
CN902
CN903
CN906
WIRE900
R903
1-876-054-
11, 12
(11, 12)
POWER BOARD
MAIN POWERTRANSFORMER
SUB POWERTRANSFORMER
NOT REPLACEABLE:BUILT IN TRANSFORMER
(AC IN)
1
3
K
A
A
K
KA
KA
A
KA
A
LINE FILTER
J MAIN BOARDCN303
112
(BX20i: US, CND/BX50BTi)
(EXCEPT BX20i: SP)
(EXCEPT BX20i: SP)
(EXCEPT BX20i: SP)
(EXCEPT BX20i: SP)
(AUS)
A
B
C
D
E
F
G
1 2 3 4 5 6 7 8 9 10 11 12 13 14
(BX20i: SP)
(BX20i: SP)
(BX20i: SP)
3
1
3
1
(BX20i: SP)
1-876-059-
VOL SELECT BOARD
1
3
1
3
– 1
– 2
(CHASSIS)
(BX20i: US, CND/BX50BTi)11, 12
(11, 12)
S901VOLTAGE SELECTOR
120V 220V 230 – 240V
230 – 240V 220V 120V
(Page 32)
Ver. 1.1
Ref. No. Location
• Semiconductor Location
D906 B-11 D907 C-9 D908 C-9 D911 F-10 D912 F-11 D913 E-10 D914 F-11 D916 G-10 D917 G-10 D918 G-11 D919 G-9 D920 F-13 D922 C-10 D923 C-9 D924 E-9 D925 D-10 D926 D-10 D927 E-9
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
4141
6-20. SCHEMATIC DIAGRAM - POWER Board -
R910 R911R908
R904R905
R909
D923
D922
C914R906
C921
D908
D907
C922C923
F901
C901C905
C906C902
D917
D916
D919
D918
D920R902
R901
D911
D912C936
D913
D914
CN901 RY901
D906
CN904
D927
D924
D925
D926
C925
JW924
JW934
JW925 JW926
JW931
JW928
JW927
JW930
LF901
F902
JW929
JW923
T902
T901
0 01k
4.7k4.7k
1k
MC2838MA2J1110GLS0
1050V 10k
100016V
MC2838
MC2836
220035V
220035V
T2AL 250V
0.10.1
0.10.1
1N5401
1N5401
1N5401
1N5401
MC2838
22k
22k
1N4002B
1N4002B
220025V
1N4002B
1N4002B
3P
MA2J1110GLS0
12P
1N4002-B5
1N4002-B5
1N4002-B51N4002-B5
220016V
T2AL 250V
USB UNREG GND
USB UNREG
RELAY
SUB GND
UNREG SUB
ACDET
PROTECT
+B
GND
-B
UNREG
UNREG GND
TRANSFORMER
SUB
TRANSFORMERMAIN
LINE FILTER
(AC IN)
NOT REPLACEABLE:∗
∗
(AUS)
(BX20i:US,CND/BX50BTi)
BUILD IN TRANSFORMERJW933
JW935
CN902
M.120V
M.220V
M.240V
M.120V
M.220V
M.240V
S.115V
S.220-240V
COMMON
S.115V
S.220-240V
COMMON
3P
CN9053P
220V
VOLTAGESELECTOR
120V 230-240V
220V230-240V 120V
CN9063P
CN9033P
-1
-2
(BX20i:SP)
(BX20i:SP)
(BX20i:SP)
(BX20i:SP)
(EXCEPT BX20i:SP)
(EXCEPT BX20i:SP)
(EXCEPT BX20i:SP)
(EXCEPT BX20i:SP)
R9032.21/2W
(BX20i:US,CND/BX50BTi) WIRE900
(CHASSIS)
S901
(Page 35)
Ver. 1.1
HCD-BX20i/BX50BTi
HCD-BX20i/BX50BTi
4242
• Waveforms- PANEL Board -
- MAIN Board -
- IP Board -- CD Board -IC101 (RFi)(CD play mode)
200 mV/DIV, 500 ns/DIV
0.5 to 1.3 Vp-p
IC101 (XO)(CD play mode)
1 V/DIV, 20 ns/DIV59.1 ns
50 ns
3.3 Vp-p
IC101 (XOUT)
1 V/DIV, 20 ns/DIV
1.7 Vp-p
Q903 (Collector)
IC902 (OSCI)
1 V/DIV, 1 μs/DIV
1.3 s1.7 Vp-p
20 V/DIV, 5 μs/DIV
11.2 s
32 Vp-p
2 V/DIV, 5 μs/DIV
11.2 s
3.2 Vp-p
Q903 (Base)
IC301 (XOUT)
1 V/DIV, 100 ns/DIV
1 V/DIV, 100 ns/DIV
IC301 (XCOUT)
30.6 s2.8 Vp-p
200 ns3.1 Vp-p
• IC Block Diagrams– CD Board –IC201 TK63115SCL-G@GT
THERMAL &OVER CURRENT
PROTECTION
VOLTAGEREFERENCE
ON/OFFCONTROL
VIN 1
GND 2
VCONT 3 NC4
VOUT5+–
1
2
3
4
5
6
7
8
9
10
11
1213
14
28
27
26
24
23
22
21
20
19
18
17
16
15
25
LEVELSHIFT
LEVELSHIFT
THERMALSHUT-DOWNREGULATORBIAS TRAP
LEVELSHIFT
MUTE
LEVELSHIFT D.BUFF
D.BUFF
D.BUFFGND
IN4
IN4'
BIAS
VCC
VCC
IN3'
IN3
VO3(+)
VO3(–)
VO4(–)
VO4(+)
RESETt
OPIN
VO1(–)
REGB
VO1(+)
IN1
RESET
REGOUT
MUTE
GND
IN2'
IN2
VO2(+)
VO2(–)GND
OPOUT
D.BUFF
D.BUFF
D.BUFF
D.BUFF
D.BUFF
REGU
LATO
R
VCC
VCC
VIN 1
CE 3VSS 2
NC4VOUT5
+–
ON/OFFCONTROL
CURRENTLIMIT
VOLTAGEREFERENCE
CONTROLCIRCUIT
BANDGAPREFERENCE
+–
OVER HEAT &OVER CURRENT
PROTECTION
1
VCON
T
3
NP
2
GND
4
VOUT
5
VIN
IC401 BA5826SFP-E2
– BT Board –IC903 XC6213B332MR
– IP Board –IC102 TK11133CSCL-G
HCD-BX20i/BX50BTi
43
– MAIN Board –IC201 R5523N001B-TR-F
IC304 BD3499FV-E2 IC309, 312 MC14052BDTR2
IC311 BA6956AN
1EN
2GND
3FLG
4 IN
5 OUT
GATECONTROL
UVLO
THERMALSHUTDOWN
CURRENTLIMIT
FLAGDELAY
1A1
18 BCB117 BCA116 BCA2
20 SB2
19 OUT2
22 SB121 SR
24 VCC
23 OUT1
26 SDA25 SCL
28 FIL27 GND
15 BCB2
2A23B1
5C16C2
4B2
11VOL112VOL2
13TC214TC1
7D18D2
9SEL210SEL1
INPUTSELECTOR
TREBLE/BASS
INVERTER
VOLUME
INPUTGAIN
SURROUND
PC BUSLOGIC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
2Y0
1Y2
VCC
1Y1
1-COM
1Y0
1Y3
A
BGND
GND
INH
2Y1
2Y3
2-COM
2Y2
1 2 3 4 5 6 7 8 9
CONTROL LOGIC
TSD
VREF
OUT2
OUT1RN
F
VM VCC
FIN
GND
RIN
HCD-BX20i/BX50BTi
44
SEGMENTDRIVER
GRIDDRIVER
CG-RAM
ADDRESS SELECTOR
DC-RAM CG-ROM
8 BITSHIFT
REGISTER
TIMINGGENERATOR 2
TIMINGGENERATOR 1
COMMANDDECODER
CONTROLCIRCUITPORT
DRIVER
WRITEADDRESSCOUNTER
READADDRESSCOUNTER
GR132
SG20
16
SG19
15
GR2
33
OSCI 50
VSS 49
VDD 56
RSTB 52
OSCO 51
AD-RAM
DUTY CONTROL
OSCILLATOR
DIGIT CONTROLCLKB 54
DIN 55
CSB 53
P1 57P2 58
ADDRIVER
AD2 59AD1 60
SG4 64SG3 63SG2 62SG1 61
SG3531SG3430SG3329SG3228SG3127SG3026SG2925SG2824SG2723SG2622SG2521SG2420SG2319SG2218SG2117
SG18
14
SG17
13
SG16
12
SG15
11
SG14
10
SG13
9
SG12
8
SG11
7
SG10
6
SG9
5
SG8
4
SG7
3
SG6
2
SG5
1
GR3
34
GR4
35
GR5
36
GR6
37
GR7
38
GR8
39
GR9
40
GR10
41
GR11
42
GR12
43
GR13
44
GR14
45
GR15
46
GR16
47
VEE
48
– AMP Board –IC601 STK433-730-E
11
IN/1
10
MONI
TOR
13ST
-BY
4
CH1+
12
NF/1
8
+PRE
9
GND/
SUB
2
-VCC
1
-PRE
3
+VCC
5
CH1-
PRE DRIVECH1
FINAL DRIVECH1
14NF
/26
CH2+
15
IN/2
7
CH2-
PRE DRIVECH2
FINAL DRIVECH2
STANDBYCIRCUIT
– PANEL Board –IC902 PT6302LQ-010
HCD-BX20i/BX50BTi
45
• IC Pin Function DescriptionCD BOARD IC101 (CD-MP3 PROCESSOR) TC94A70FG-006 (D, HZ
Pin No. Pin Name I/O Description1 AVSS3 - Ground terminal2 RFZi I RF ripple zero crossing signal input terminal3 RFRP O RF ripple signal output terminal4 SBAD/RFDC O Sub beam addition signal or RF peak detection signal output terminal Not used5 FEi O Focus error signal output terminal Not used6 TEi O Tracking error signal output terminal7 TEZi I Tracking error zero crossing signal input terminal8 AVDD3 - Power supply terminal (+3.3 V)9 FOo O Focus coil drive signal output terminal
10 TRo O Tracking coil drive signal output terminal11 VREF I Reference voltage (+1.65V) input terminal12 FMo O Sled motor drive signal output terminal13 DMo O Spindle motor drive signal output terminal14 VSSP3 - Ground terminal15 VCOi I VCO control voltage input terminal16 VDDP3 - Power supply terminal (+3.3 V)17 VDD1 - Power supply terminal (+1.5 V)18 VSS - Ground terminal19 FGiN I FG signal input terminal Not used20 IO0 (/HSO) I Disc inner position detection signal input terminal21 IO1 (/UHSO) O Not used22 XVSS3 - Ground terminal23 XI I System clock input terminal (16.9344 MHz)24 XO O System clock output terminal (16.9344 MHz)25 XVDD3 - Power supply terminal (+3.3 V)26 DVSS3 - Ground terminal27 RO O Audio data (R-ch) output to the input selector28 DVDD3 - Power supply terminal (+3.3 V)29 DVR O Reference voltage (+1.65V) output terminal30 LO O Audio data (L-ch) output to the input selector31 DVSS3 - Ground terminal32 VDDT3 - Power supply terminal (+3.3 V)33 VSS1 - Ground terminal34 VDD1 - Power supply terminal (+1.5 V)35 VDDM1 - Power supply terminal (+1.5 V)36 SRAMSTB I S-RAM standby mode control signal input terminal Fixed at "L" in this set37 XRST I Reset signal input from the system controller "L": reset
38, 39 BUS0, BUS1 I Serial data input from the system controller40 BUS2 (SO) I Serial data input from the system controller41 BUS3 (SI) I Serial data input from the system controller42 BUCK (CLK) I Serial data transfer clock signal input from the system controller43 XCCE I Chip enable signal input from the system controller44 TEST I Setting terminal for test mode Normally fi xed at "L"45 IRQ I Interrupt request signal input terminal Not used46 AoUT3 (PO4) O Request signal output terminal Not used47 AoUT2 (PO5) O Audio data output terminal Not used48 PIO0 O Request signal output to the system controller
49, 50 PIO1, PIO2 O Not used51 PIO3 I Gate signal input terminal Not used52 VSS1 - Ground terminal53 VDDT3 - Power supply terminal (+3.3 V)54 SBSY O Subcode block sync signal output to the system controller55 SBOK/FOK O Not used56 IPF O Not used
HCD-BX20i/BX50BTi
46
Pin No. Pin Name I/O Description57 SFSY/LOCK O Not used58 ZDET O Zero detection signal output terminal Not used59 GPIN I Not used60 MS I Microcomputer interface mode selection signal input terminal Fixed at "H" in this set61 DOUT (PO6) O Digital audio data output terminal Not used62 AOUT (PO7) O Audio data output terminal Not used63 BCK (PO8) O Bit clock signal output terminal Not used64 LRCK (PO9) O L/R sampling clock signal output terminal Not used65 AIN (PI4) I Digital audio data input terminal Not used66 BCKi (PI5) I Bit clock signal input terminal Not used67 LRCKi (PI6) I L/R sampling clock signal input terminal Not used68 VDD1 - Power supply terminal (+1.5 V)69 VSS - Ground terminal70 AWRC - Not used71 PVDD3 - Power supply terminal (+3.3 V)72 PDO O Phase error margin signal between EFM signal and PLCK signal output terminal73 TMAXS O TMAX detection signal output terminal Not used74 TMAX O TMAX detection signal output terminal75 LPFN I Inverted signal input from the operation amplifi er for PLL loop fi lter76 LPFo O Signal output from the operation amplifi er for PLL loop fi lter77 PVREF I Reference voltage (+1.65V) input terminal78 VCOF O VCO fi lter output terminal79 PVSS3 - Ground terminal80 SLCo O EFM slice level output terminal81 RFi I RF signal input terminal82 RFRPi I RF ripple signal input terminal83 RFEQo O EFM slice level output terminal84 VRo O Reference voltage (+1.65V) output terminal85 RESiN O External resistor connection terminal86 VMDiR O Reference voltage (+1.65V) output terminal for automatic power control circuit87 TESTR O Low-pass fi lter terminal for RFEQO offset correction88 AGCi I RF signal amplitude adjustment amplifi cation input terminal89 RFo O RF signal generation amplifi cation output terminal90 RVDD3 - Power supply terminal (+3.3 V)
91 LDo O Laser diode on/off control signal output to the automatic power control circuit "H": laser diode on
92 MDi I Light amount monitor input from the laser diode of optical pick-up block93 RVSS3 - Ground terminal94 FNi2 (C) I Main beam (C) input from the optical pick-up block95 FNi1 (A) I Main beam (A) input from the optical pick-up block96 FPi2 (D) I Main beam (D) input from the optical pick-up block97 FPi1 (B) I Main beam (B) input from the optical pick-up block98 TPi (F) I Sub beam (F) input from the optical pick-up block99 TNPC O External capacitor connection terminal100 TNi (E) I Sub beam (E) input from the optical pick-up block
HCD-BX20i/BX50BTi
47
IP BOARD IC101 R5F21246SN060FP (iPod INTERFACE)
Pin No. Pin Name I/O Description1 NC - Not used2 SCL O Not used3 P33 O Not used4 SDA O Not used5 MODE I Mode selection signal input terminal "L": single chip mode, "H": serial I/O mode,
6, 7 P34, P44 O Not used8 RESET I Reset signal input from the reset signal generator "L": reset9 XOUT O System clock output terminal (20 MHz)
10 VSS - Ground terminal11 XIN I System clock input terminal (20 MHz)12 VCC - Power supply terminal (+3.3V)
13 to 16 LED O LED drive signal output terminal Not used17 to 22 P23 to P20, P17, P16 O Not used
23 RXD_iPod I Serial data input from the iPod connector24 TXD_iPod O Serial data output to the iPod connector25 P13 O Not used26 NC - Not used27 AC CUT O Not used28 TXD_DMPORT O Serial data output to the system controller29 RXD_DMPORT I Serial data input from the system controller
30 to 35 P12 to P10, P31, P30, P65 O Not used
36 VIDEO_MUTE O Not used37 AUDIO_MUTE O Audio muting on/off control signal output terminal "L": muting on38 P07 O Not used
39, 40 NC - Not used41 to 43 P06 to P04 O Not used
44 VREF I Reference voltage (+3.3V) input terminal45 P60 O Not used46 DETECT I iPod connection detection signal input from the iPod connector "L": iPod is connected47 P61 O Not used48 MODEL I Not used49 DEST O Not used
50, 51 KEY0, KEY1 O Not used52 P37 O Not used
HCD-BX20i/BX50BTi
48
MAIN BOARD IC301 R5F3640DDFA (SYSTEM CONTROLLER)
Pin No. Pin Name I/O Description1 to 3 CD BUS2 to CD BUS0 O Serial data output to the CD-MP3 processor
4 SIRCS I SIRCS signal input from the remote control receiver5 STBY-RELAY O Power on/off control signal output terminal "H": power on6 TUNER TUNED I Tuning detection signal input from the tuner (FM/AM)7 RDS DATA I RDS data input from terminal Not used8 BYTE I External data bus width selection signal input terminal9 CN VSS I Processor mode switch input terminal (for test)
10 XCIN I Sub system clock input terminal (32.768 kHz)11 XCOUT O Sub system clock output terminal (32.768 kHz)
12 RESET I System reset signal input from the reset signal generator "L": reset For several hundreds msec. after the power supply rises, "L" is input, then it changes to "H"
13 XOUT O Main system clock output terminal (5 MHz)14 VSS - Ground terminal15 XIN I Main system clock input terminal (5 MHz)16 VCC - Power supply terminal (+3.3V)17 NMI I Non-maskable interrupt signal input terminal Not used18 RDS INT I RDS data transfer clock signal input terminal Not used19 SBSY I Subcode block sync signal input from the CD-MP3 processor20 AC CUT I AC cut on/off detection signal input terminal "L": AC cut on21 NC O Not used22 AMP CLOCK O Serial data transfer clock signal output to the electrical volume23 TA LINE MUTE O Line muting on/off control signal output terminal "H": muting on24 AMP DATA O Serial data output to the electrical volume25 ST CE O Chip enable signal output to the tuner (FM/AM)26 DATA IN/STEREO I Serial data and stereo detection signal input from the tuner (FM/AM)27 ST CLK O Serial data transfer clock signal output to the tuner (FM/AM)28 ST DATA OUT O Serial data output to the tuner (FM/AM)29 IIC CLK I/O Two-way IIC clock bus terminal Not used30 IIC DATA I/O Two-way IIC data bus terminal Not used31 BT DOUT O Serial data output to the bluetooth module (BX50BTi)32 BT DIN O Serial data input from the bluetooth module (BX50BTi)33 BT CTS I Clear to send signal input from the bluetooth module (BX50BTi)34 BT_RTS O Ready to send signal output to the bluetooth module (BX50BTi)35 USB TXD O Serial data output terminal Not used36 USB RXD I Serial data input terminal Not used37 NC O Not used38 USB RTS O Ready to send signal output terminal Not used39 SEL A O Input selection control signal output terminal (BX50BTi)40 INH O Input selection control signal output terminal (BX50BTi)41 PULL DOWN O Connected to the ground42 NC O Not used43 BT AUDIO OUT MUTE O Blutetooth muting on/off control signal output terminal "H": muting on (BX50BTi)44 BT_AV_ ROLE O Transmission/reception mode notifi cation signal output to the bluetooth module (BX50BTi)45 BT_RESET O Reset signal output to the bluetooth module "L": reset (BX50BTi)46 PULL UP O Connected to the power supply47 DAB TXD O Serial data output terminal for DAB section Not used48 DAB RXD I Serial data input terminal for DAB section Not used
49, 50 NC O Not used51 DAB POWER 1.2V O Power supply (+1.2V) on/off control signal output terminal for DAB section Not used52 DAB-POWER 3.3V O Power supply (+3.3V) on/off control signal output terminal for DAB section Not used53 STK-ON O Standby control signal output to the power amplifi er
54 to 56 NC O Not used57 CD ON O Power on/off control signal output terminal for CD section "H": power on58 USB POWER O Power on/off control signal output terminal for USB section Not used59 CD RESET O Reset signal output to the CD-MP3 processor "L": reset
HCD-BX20i/BX50BTi
49
Pin No. Pin Name I/O Description60 CD DRIVER MUTE O Muting signal output to the coil/motor driver61 MODEL IN I Setting terminal for the model Not used62 VCC - Power supply terminal (+3.3V)63 NC O Not used64 VSS - Ground terminal65 NC O Not used66 I-POWER MONITOR I Power monitor input terminal67 DEC BUS SEL O Bus selection signal output terminal Not used68 MP3 IREQ I Request signal input from the CD-MP3 processor69 CD CCE O Chip enable signal output to the CD-MP3 processor70 CD CLK O Serial data transfer clock signal output to the CD-MP3 processor
71, 72 NC O Not used73 NC I iPod connection detection signal input from the iPod connector "L": iPod is connected74 KEY WAKE UP I Wake up signal input terminal75 USB RESET O Reset signal output terminal (for USB section) Not used76 USB CTS I Clear to send signal input terminal (for USB section) Not used77 CLINK-TX-DOUT O Serial data output to the iPod interface78 CLINK-RX-DIN I Serial data input from the iPod interface79 NC O Not used80 DMPORT POWER O VBUS power on/off control signal output terminal "H": power on
81 to 83 KEY3 to KEY1 I Top and front panel key input terminal (A/D input)84 CDM LOAD OUT O Loading motor control signal output terminal (for loading out)85 CDM LOAD IN O Loading motor control signal output terminal (for loading in)86 SPEC IN I Setting terminal for the destination87 CDM SW (OPEN) I Disc tray open position detection signal input terminal "L": disc tray is opened88 CDM SW (CLOSE) I Disc tray close position detection signal input terminal "L": disc tray is closed89 STANDBY LED O LED drive signal output terminal for STANDBY indicator "L": LED on90 FL RESET O Reset signal output to the fl uorescent indicator tube "L": reset91 FL CS O Chip select signal output to the fl uorescent indicator tube92 FL SD O Serial data output to the fl uorescent indicator tube93 FL SCLK O Serial data transfer clock signal output to the fl uorescent indicator tube94 X5V FLAG I VBUS voltage detection signal input terminal95 NC O Not used96 AVSS - Ground terminal95 NC O Not used98 VREF I Reference voltage (+3.3V) input terminal99 AVCC - Power supply terminal (+3.3V)
100 CD BUS3 O Serial data output to the CD-MP3 processor
50
HCD-BX20i/BX50BTiSECTION 7
EXPLODED VIEWS
1 3-282-727-01 PANEL (SIDE L) (BX20i: US/BX50BTi: US) 1 3-282-727-11 PANEL (SIDE L) (BX20i: CND/BX50BTi: CND) 1 3-282-727-21 PANEL (SIDE L) (BX20i: AUS, SP) 2 3-282-728-01 PANEL (SIDE R) (BX20i: US/BX50BTi: US) 2 3-282-728-11 PANEL (SIDE R) (BX20i: CND/BX50BTi: CND)
2 3-282-728-21 PANEL (SIDE R) (BX20i: AUS, SP) 3 2-580-628-01 SCREW +BVST 3X6 (BX20i: US, CND/BX50BTi)
3 7-685-871-01 SCREW +BVTT 3X6 (S) (BX20i: AUS, SP) 4 7-685-647-11 SCREW +BVTP 3X10 TYPE2 N-S
(BX20i: AUS, SP) 4 7-685-647-19 SCREW +BVTP 3X10 TYPE2 N-S
(BX20i: US, CND/BX50BTi)
#1 7-685-871-01 SCREW +BVTT 3X6 (S)
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
Note:• -XX and -X mean standardized parts, so
they may have some difference from the original one.
• Items marked “*” are not stocked since they are seldom required for routine ser-vice.
Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not sup-plied.
• Color Indication of Appearance Parts Ex-ample:
KNOB, BALANCE (WHITE) . . . (RED) R R Parts Color Cabinet’s Color• Accessories are given in the last of the
electrical parts list.• Abbreviation AUS : Australian model CND : Canadian model SP : Singapore model
7-1. PANEL SECTION
The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety.Replace only with part number specifi ed.
Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifi é.
1
2
3
3
3
#1
#1
4
4
4
#1
front panel section
MAIN board section
top panel section
Ver. 1.1
51
HCD-BX20i/BX50BTi
7-2. TOP PANEL SECTION
51 3-087-053-01 +BVTP2.6 (3CR) 52 3-282-748-01 BUTTON (VOL) (VOL +, VOL –)
(BX20i: US, CND/BX50BTi) 52 3-282-748-31 BUTTON (VOL) (VOL +, VOL –) (BX20i: AUS, SP) 53 3-282-738-01 BUTTON (ENTER) (BX20i: US, CND/BX50BTi) 53 3-282-738-31 BUTTON (ENTER) (BX20i: AUS, SP)
54 3-282-739-01 BUTTON (TUNE) (lm TUNE –, +, ML TUNE +, –)
(BX20i: US, CND/BX50BTi) 54 3-282-739-31 BUTTON (TUNE)
(lm TUNE –, +, ML TUNE +, –) (BX20i: AUS, SP)
55 3-282-733-31 BUTTON (FUNCTION B) (iPod u, CD u, x CANCEL, DSCX, DISPLAY) (BX20i: US, CND)
55 3-282-733-41 BUTTON (FUNCTION B) (iPod u, CD u, x CANCEL, DSCX, DISPLAY) (BX20i: AUS, SP)
55 3-282-733-71 BUTTON (FUNCTION B) (iPod u, BLUETOOTH, x CANCEL, DSCX, DISPLAY) (BX50BTi)
56 3-282-732-31 BUTTON (FUNCTION) (TUNER/BAND, AUDIO IN, FUNCTION, REPEAT/FM MODE, PLAY MODE/
TUNING MODE) (BX20i: US, CND)
56 3-282-732-41 BUTTON (FUNCTION) (TUNER/BAND, AUDIO IN, FUNCTION, REPEAT/FM MODE, PLAY MODE/
TUNING MODE) (BX20i: AUS, SP) 56 3-282-732-61 BUTTON (FUNCTION) (CD u, TUNER/BAND,
FUNCTION, REPEAT/FM MODE, PLAY MODE/TUNING MODE) (BX50BTi)
57 3-282-746-01 PANEL TOP (IP) (BX20i: US/BX50BTi: US) 57 3-282-746-11 PANEL TOP (IP) (BX20i: CND/BX50BTi: CND)
57 3-282-746-31 PANEL TOP (IP) (BX20i: AUS, SP) 58 A-1541-488-A BASE (IP) ASSY (BX20i: US, CND/BX50BTi) 58 A-1541-490-A BASE (IP) ASSY (BX20i: AUS, SP) 60 A-1466-251-A IP BOARD, COMPLETE 61 4-674-137-11 SCREW (PTP2X5)
62 3-277-576-01 ESCUTCHEON (BX20i: US, CND/BX50BTi) 62 3-277-576-11 ESCUTCHEON (BX20i: AUS, SP) 63 3-921-725-01 SCREW (2.6X10), +PWH
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
57
56
55
54
53
5260
62
61
58
51
51
51 63
not supplied(TOP KEY board)
not supplied(HOLD board)
not supplied
Ver. 1.1
52
HCD-BX20i/BX50BTi
7-3. FRONT PANEL SECTION
101 A-1444-400-A PANEL ASSY, FRONT (BX20i: US) 101 A-1466-449-A PANEL ASSY, FRONT (BX20i: CND) 101 A-1466-495-A PANEL ASSY, FRONT (BX50BTi: US) 101 A-1466-500-A PANEL ASSY, FRONT (BX50BT: CND) 101 A-1510-695-A PANEL ASSY, FRONT (BX20i: AUS, SP)
102 4-233-372-02 FOOT (FELT)
103 1-834-114-11 CABLE, COAXIAL (WITH U.F.L CON) (BX50BTi) 104 3-087-053-01 +BVTP2.6 (3CR) 105 1-831-997-21 CABLE, FLEXIBLE FLAT (13 CORE) 106 X-2188-620-1 BUTTON (BT) ASSY (BX50BTi) FL901 1-519-993-21 INDICATOR TUBE, FLUORESCENT
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
102
106
101
103
104
104
105
FL901not supplied
not supplied(PANEL board)
not supplied(ANT board)
(BX50BTi)
Ver. 1.1
53
HCD-BX20i/BX50BTi
7-4. MAIN BOARD SECTION
151 A-1444-382-A MAIN BOARD, COMPLETE (BX20i: US, CND) 151 A-1456-502-A MAIN BOARD, COMPLETE (BX50BTi) 151 A-1510-697-A MAIN BOARD, COMPLETE (BX20i: SP) 151 A-1527-091-A MAIN BOARD, COMPLETE (BX20i: AUS) 152 1-832-803-21 CABLE, FLEXIBLE FLAT (7 CORE)
153 3-077-331-01 +BV3 (3-CR) 154 3-282-726-01 PANEL (REAR) (BX20i: US/BX50BTi: US) 154 3-282-726-11 PANEL (REAR) (BX20i: CND/BX50BTi: CND) 154 3-282-726-51 PANEL (REAR) (BX20i: AUS) 154 3-282-726-61 PANEL (REAR) (BX20i: SP)
156 1-832-811-21 CABLE, FLEXIBLE FLAT (9 CORE) 157 4-233-372-02 FOOT (FELT) 158 1-693-762-21 TUNER (FM/AM) (BX20i: US, CND/BX50BTi) 158 1-693-764-21 TUNER (FM/AM) (BX20i: AUS, SP)
159 7-685-650-11 SCREW +BVTP 3X16 TYPE2 N-S (BX20i: AUS, SP)
159 7-685-650-19 SCREW +BVTP 3X16 TYPE2 N-S (BX20i: US, CND/BX50BTi)
160 2-580-628-01 SCREW +BVST 3X6 (BX20i: US, CND/BX50BTi) 160 7-685-871-01 SCREW +BVTT 3X6 (S) (BX20i: AUS, SP) 161 7-685-647-11 SCREW (B) (+) BV TAPPING (BX20i: AUS, SP) 161 7-685-647-19 SCREW (B) (+) BV TAPPING
(BX20i: US, CND/BX50BTi)
162 3-087-053-01 +BVTP 2.6 (3CR) M901 1-787-400-11 D.C. FAN #1 7-685-871-01 SCREW +BVTT 3X6 (S) #5 7-685-646-11 SCREW +BVTP 3X8 TYPE2 N-S #6 7-685-650-11 SCREW +BVTP 3X16 TYPE2 N-S
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
#1
160#5
#5
#5160
#5
#5
#6
159
notsupplied
notsupplied
not supplied
M901
158
POWER board section
157
157
156
154
161
151
152153
not supplied(GUARD board)
not supplied(AMP board)
not supplied(5VREG board)
not supplied(9VREG board)
162
not supplied(VOL SELECT board)
(BX20i: SP)
Ver. 1.1
54
HCD-BX20i/BX50BTi
7-5. POWER BOARD SECTION
201 1-832-615-21 CABLE, FLEXIBLE FLAT (21 CORE) 202 1-834-979-21 CABLE, FLEXIBLE FLAT (5P) 203 3-281-653-01 DOOR CD (BX20i: US, CND/BX50BTi) 203 3-281-653-11 DOOR CD (BX20i: AUS, SP) 204 3-077-331-21 +BV3 (3-CR)
205 A-1444-806-A BT BOARD, COMPLETE (BX50BTi) 206 3-216-063-01 CASE (LID), SHIELD (BX50BTi) 208 1-832-584-21 CABLE, FLEXIBLE FLAT (15 CORE) (BX50BTi) 209 4-900-386-01 SCREW 210 2-594-960-41 SPACER (TRANSFORMER)
211 3-087-053-01 +BVTP2.6 (3CR)
0 212 1-834-965-21 CORD, POWER (BX20i: US, CND/BX50BTi)0 212 1-834-966-21 CORD, POWER (BX20i: SP)0 212 1-834-967-21 CORD, POWER (BX20i: AUS) 213 3-703-244-00 BUSHING (2104), CORD
214 3-077-331-01 +BV3 (3-CR) 0 F901 1-532-388-33 FUSE (T2AL/250V)0 F902 1-532-388-33 FUSE (T2AL/250V)0 T901 1-445-187-11 TRANSFORMER, POWER (BX20i: AUS, SP)0 T901 1-445-188-11 TRANSFORMER, POWER
(BX20i: US, CND/BX50BTi)
#5 7-685-646-11 SCREW +BVTP 3X8 TYPE2 N-S
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
201202
203
214
205
206
#5
208 209
210
204
212
213
211
214
209
not supplied(POWER board)
not supplied
loading mechanism section
#5
not supplied
not supplied
(BX50BTi)
F902
T901
F901
not supplied
not supplied
not supplied(HP board)
not supplied
Note: When exchanging or removing Ref. No. 208, Please be sure to refer to “3-5. FRONT PANEL BLOCK” (Page 12) in SECTION 3 DISESSEMBLY and tnstall it.
Ver. 1.1
55
HCD-BX20i/BX50BTi
7-6. LOADING MECHANISM SECTION
251 A-1242-967-A LOADING (BK) ASSY 252 3-080-478-01 BELT 253 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING
254 4-227-045-41 SPRING (INSULATOR) 255 4-229-005-41 INSULATOR
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
base unit section255
255
253255253
255
254
251
254
252
not supplied(MOTOR board)
not supplied
not supplied
56
HCD-BX20i/BX50BTi
7-7. BASE UNIT SECTION (BU-K6BD90-WOD)
0 301 A-4735-357-A BASE ASSY, OP (KSM-213D) 302 1-832-404-21 CABLE, FLEXIBLE FLAT (16 CORE)
303 A-1217-914-A CD BOARD, COMPLETE S201 1-771-853-11 SWITCH, DETECTION (LIMIT)
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
301(including sled motor (M402), spindle motor (M401))
302
303
S201
sled motor (M402)spindle motor (M401)
57
HCD-BX20i/BX50BTiSECTION 8
ELECTRICAL PARTS LIST
5VREG BOARD ************
< CAPACITOR >
C373 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C380 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
< DIODE >
D305 6-501-582-01 DIODE 1N4002-B5
< IC >
0 IC306 8-759-231-53 IC TA7805S
< RESISTOR >
R401 1-216-817-11 METAL CHIP 470 5% 1/10W R437 1-216-797-11 METAL CHIP 10 5% 1/10W*************************************************************
9VREG BOARD ************
< CAPACITOR >
C325 1-126-933-11 ELECT 100uF 20% 16V C335 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< IC >
0 IC305 6-700-830-01 IC KIA7809API*************************************************************
AMP BOARD **********
< CAPACITOR >
C501 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C502 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C503 1-126-947-11 ELECT 47uF 20% 35V C504 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C505 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C506 1-126-947-11 ELECT 47uF 20% 35V C511 1-126-964-11 ELECT 10uF 20% 50V C512 1-126-964-11 ELECT 10uF 20% 50V C519 1-126-925-91 ELECT 470uF 20% 10V C523 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C524 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V C525 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C526 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C527 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C528 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C529 1-126-948-11 ELECT 100uF 20% 35V
< CONNECTOR >
CN308 1-568-826-11 CONNECTOR, FFC 7P0 CN320 1-819-133-11 PIN, CONNECTOR
< IC >
0 IC601 6-711-987-01 IC STK433-730-E
< RESISTOR >
R501 1-216-817-11 METAL CHIP 470 5% 1/10W R502 1-216-841-11 METAL CHIP 47K 5% 1/10W R503 1-216-821-11 METAL CHIP 1K 5% 1/10W R504 1-216-841-11 METAL CHIP 47K 5% 1/10W R505 1-216-841-11 METAL CHIP 47K 5% 1/10W
R506 1-216-817-11 METAL CHIP 470 5% 1/10W R507 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R508 1-216-821-11 METAL CHIP 1K 5% 1/10W R509 1-216-841-11 METAL CHIP 47K 5% 1/10W R510 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R512 1-216-821-11 METAL CHIP 1K 5% 1/10W R513 1-216-821-11 METAL CHIP 1K 5% 1/10W R514 1-216-821-11 METAL CHIP 1K 5% 1/10W R515 1-216-864-11 SHORT CHIP 0 R516 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(BX20i)
R516 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(BX50BTi)
R517 1-216-837-11 METAL CHIP 22K 5% 1/10W(BX20i)
R517 1-216-841-11 METAL CHIP 47K 5% 1/10W(BX50BTi)
R518 1-216-837-11 METAL CHIP 22K 5% 1/10W(BX20i)
R518 1-216-841-11 METAL CHIP 47K 5% 1/10W(BX50BTi)
R519 1-216-825-11 METAL CHIP 2.2K 5% 1/10W(BX20i)
R519 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(BX50BTi)
R521 1-216-817-11 METAL CHIP 470 5% 1/10W R522 1-216-817-11 METAL CHIP 470 5% 1/10W R523 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
5VREG
When indicating parts by reference num-ber, please include the board name.
Note:• Due to standardization, replacements in
the parts list may be different from the parts specifi ed in the diagrams or the com-ponents used on the set.
• -XX and -X mean standardized parts, so they may have some difference from the original one.
• Items marked “*” are not stocked since they are seldom required for routine ser-vice.
Some delay should be anticipated when ordering these items.
• CAPACITORS uF: μF• COILS uH: μH
• RESISTORS All resistors are in ohms. METAL: Metal-fi lm resistor. METAL OXIDE: Metal oxide-fi lm resistor. F: nonfl ammable• SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. .• Abbreviation AUS : Australian model CND : Canadian model SP : Singapore model
The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specifi ed.
Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifi é.
9VREG AMPVer. 1.1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
58
R524 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R542 1-260-087-11 CARBON 100 5% 1/2W R543 1-216-853-11 METAL CHIP 470K 5% 1/10W R544 1-216-853-11 METAL CHIP 470K 5% 1/10W R545 1-216-833-11 METAL CHIP 10K 5% 1/10W
R546 1-216-864-11 SHORT CHIP 0*************************************************************
ANT BOARD (BX50BTi) **********
< CAPACITOR >
C914 1-162-907-11 CERAMIC CHIP 2PF 0.25PF 50V
< CONNECTOR >
CN904 1-818-381-11 CONNECTOR, COAXIAL*************************************************************
A-1444-806-A BT BOARD, COMPLETE (BX50BTi) *******************
< CAPACITOR >
C901 1-126-395-11 ELECT CHIP 22uF 20% 16V C902 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C904 1-126-398-11 ELECT CHIP 4.7uF 20% 35V C905 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C906 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C907 1-126-204-11 ELECT CHIP 47uF 20% 16V C908 1-126-204-11 ELECT CHIP 47uF 20% 16V C912 1-126-204-11 ELECT CHIP 47uF 20% 16V C921 1-126-193-11 ELECT CHIP 1uF 20% 50V
C922 1-126-193-11 ELECT CHIP 1uF 20% 50V C923 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C924 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C925 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C926 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C927 1-126-601-11 ELECT CHIP 2.2uF 20% 50V C928 1-126-601-11 ELECT CHIP 2.2uF 20% 50V C929 1-126-601-11 ELECT CHIP 2.2uF 20% 50V C930 1-126-601-11 ELECT CHIP 2.2uF 20% 50V C931 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C932 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C941 1-126-189-11 ELECT CHIP 0.22uF 20% 50V C942 1-126-189-11 ELECT CHIP 0.22uF 20% 50V C945 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C946 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C951 1-126-193-11 ELECT CHIP 1uF 20% 50V C952 1-126-193-11 ELECT CHIP 1uF 20% 50V C953 1-126-193-11 ELECT CHIP 1uF 20% 50V C954 1-126-193-11 ELECT CHIP 1uF 20% 50V C957 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C958 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C965 1-126-189-11 ELECT CHIP 0.22uF 20% 50V C966 1-126-189-11 ELECT CHIP 0.22uF 20% 50V
< CONNECTOR >
CN901 1-784-374-51 CONNECTOR, FFC/FPC 15P CN902 1-573-806-21 PIN, CONNECTOR (1.5MM) (SMD) 6P CN903 1-573-806-21 PIN, CONNECTOR (1.5MM) (SMD) 6P
< DIODE >
D901 6-500-335-01 DIODE MC2838-T112-1 D902 6-500-335-01 DIODE MC2838-T112-1
< JUMPER RESISTOR/FERRITE BEAD >
FB901 1-216-864-11 SHORT CHIP 0 FB902 1-216-864-11 SHORT CHIP 0 FB903 1-216-864-11 SHORT CHIP 0 FB904 1-216-864-11 SHORT CHIP 0 FB905 1-216-864-11 SHORT CHIP 0
FB906 1-216-864-11 SHORT CHIP 0 FB907 1-400-684-21 INDUCTOR, FERRITE BEAD FB908 1-216-864-11 SHORT CHIP 0 FB909 1-216-864-11 SHORT CHIP 0 FB910 1-216-864-11 SHORT CHIP 0
FB911 1-216-864-11 SHORT CHIP 0 FB913 1-216-864-11 SHORT CHIP 0 FB914 1-216-864-11 SHORT CHIP 0
< IC/BLUETOOTH MODULE >
IC901 6-702-945-01 IC NJM14558V-TE2 IC902 6-702-945-01 IC NJM14558V-TE2 IC903 6-710-962-01 IC XC6213B332MR IC904 (Not supplied) CXN1404-3BGL (BLUETOOTH MODULE)
< JUMPER RESISTOR >
JR902 1-216-864-11 SHORT CHIP 0
< RESISTOR >
R900 1-216-809-11 METAL CHIP 100 5% 1/10W R901 1-216-809-11 METAL CHIP 100 5% 1/10W R902 1-216-809-11 METAL CHIP 100 5% 1/10W R903 1-216-809-11 METAL CHIP 100 5% 1/10W R904 1-216-809-11 METAL CHIP 100 5% 1/10W
R905 1-216-809-11 METAL CHIP 100 5% 1/10W R906 1-216-809-11 METAL CHIP 100 5% 1/10W R907 1-216-817-11 METAL CHIP 470 5% 1/10W R908 1-216-817-11 METAL CHIP 470 5% 1/10W R909 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R910 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R911 1-216-864-11 SHORT CHIP 0 R913 1-216-841-11 METAL CHIP 47K 5% 1/10W R914 1-216-864-11 SHORT CHIP 0 R915 1-216-841-11 METAL CHIP 47K 5% 1/10W
R916 1-216-841-11 METAL CHIP 47K 5% 1/10W R917 1-216-841-11 METAL CHIP 47K 5% 1/10W R918 1-216-841-11 METAL CHIP 47K 5% 1/10W R921 1-216-809-11 METAL CHIP 100 5% 1/10W R922 1-216-809-11 METAL CHIP 100 5% 1/10W
R923 1-216-813-11 METAL CHIP 220 5% 1/10W R924 1-216-813-11 METAL CHIP 220 5% 1/10W R925 1-216-813-11 METAL CHIP 220 5% 1/10W R926 1-216-813-11 METAL CHIP 220 5% 1/10W R927 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R928 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R929 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R930 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R931 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R932 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
ANT BTAMP
Note: IC904 on the BT board cannot exchange with single. When IC904 on the BT board is damaged, exchange the entire mounted board.
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
5959
R933 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R934 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R935 1-216-809-11 METAL CHIP 100 5% 1/10W R936 1-216-809-11 METAL CHIP 100 5% 1/10W R937 1-216-809-11 METAL CHIP 100 5% 1/10W
R938 1-216-809-11 METAL CHIP 100 5% 1/10W R939 1-216-809-11 METAL CHIP 100 5% 1/10W R940 1-216-809-11 METAL CHIP 100 5% 1/10W R941 1-216-809-11 METAL CHIP 100 5% 1/10W R942 1-216-809-11 METAL CHIP 100 5% 1/10W
R943 1-216-845-11 METAL CHIP 100K 5% 1/10W R944 1-216-845-11 METAL CHIP 100K 5% 1/10W R945 1-216-845-11 METAL CHIP 100K 5% 1/10W R946 1-216-845-11 METAL CHIP 100K 5% 1/10W R947 1-216-841-11 METAL CHIP 47K 5% 1/10W
R948 1-216-841-11 METAL CHIP 47K 5% 1/10W R949 1-216-821-11 METAL CHIP 1K 5% 1/10W R950 1-216-821-11 METAL CHIP 1K 5% 1/10W R951 1-216-821-11 METAL CHIP 1K 5% 1/10W R952 1-216-821-11 METAL CHIP 1K 5% 1/10W
R953 1-216-841-11 METAL CHIP 47K 5% 1/10W R954 1-216-841-11 METAL CHIP 47K 5% 1/10W R955 1-216-845-11 METAL CHIP 100K 5% 1/10W R956 1-216-845-11 METAL CHIP 100K 5% 1/10W R957 1-216-857-11 METAL CHIP 1M 5% 1/10W
R958 1-216-857-11 METAL CHIP 1M 5% 1/10W R959 1-216-809-11 METAL CHIP 100 5% 1/10W R960 1-216-809-11 METAL CHIP 100 5% 1/10W R961 1-216-809-11 METAL CHIP 100 5% 1/10W R962 1-216-809-11 METAL CHIP 100 5% 1/10W
R963 1-216-845-11 METAL CHIP 100K 5% 1/10W R964 1-216-845-11 METAL CHIP 100K 5% 1/10W R965 1-216-809-11 METAL CHIP 100 5% 1/10W R966 1-216-809-11 METAL CHIP 100 5% 1/10W R967 1-216-845-11 METAL CHIP 100K 5% 1/10W
R968 1-216-845-11 METAL CHIP 100K 5% 1/10W R969 1-216-817-11 METAL CHIP 470 5% 1/10W R970 1-216-817-11 METAL CHIP 470 5% 1/10W R971 1-216-817-11 METAL CHIP 470 5% 1/10W R972 1-216-817-11 METAL CHIP 470 5% 1/10W
R973 1-216-817-11 METAL CHIP 470 5% 1/10W R974 1-216-817-11 METAL CHIP 470 5% 1/10W*************************************************************
A-1217-914-A CD BOARD, COMPLETE *******************
< CAPACITOR >
C100 1-164-360-11 CERAMIC CHIP 0.1uF 16V C101 1-164-360-11 CERAMIC CHIP 0.1uF 16V C102 1-164-360-11 CERAMIC CHIP 0.1uF 16V C103 1-164-360-11 CERAMIC CHIP 0.1uF 16V C104 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C105 1-164-360-11 CERAMIC CHIP 0.1uF 16V C106 1-128-995-21 ELECT CHIP 100uF 20% 10V C107 1-164-360-11 CERAMIC CHIP 0.1uF 16V C108 1-164-360-11 CERAMIC CHIP 0.1uF 16V C109 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C110 1-164-360-11 CERAMIC CHIP 0.1uF 16V C112 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C113 1-164-360-11 CERAMIC CHIP 0.1uF 16V C115 1-124-778-00 ELECT CHIP 22uF 20% 6.3V C116 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C117 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C118 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C119 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C120 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C122 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C123 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C124 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C125 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C126 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C127 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C128 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V C130 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V C132 1-164-360-11 CERAMIC CHIP 0.1uF 16V C133 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C136 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
C137 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C138 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C139 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C140 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C141 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C142 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C143 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C144 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C145 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C146 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C147 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C148 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C149 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C150 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C151 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C152 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C153 1-164-360-11 CERAMIC CHIP 0.1uF 16V C201 1-128-995-21 ELECT CHIP 100uF 20% 10V C202 1-128-995-21 ELECT CHIP 100uF 20% 10V C204 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C205 1-164-360-11 CERAMIC CHIP 0.1uF 16V C206 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C207 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C301 1-164-360-11 CERAMIC CHIP 0.1uF 16V C302 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V
C303 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V C306 1-128-995-21 ELECT CHIP 100uF 20% 10V C307 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C309 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C401 1-128-394-11 ELECT CHIP 220uF 20% 10V
C403 1-164-360-11 CERAMIC CHIP 0.1uF 16V C404 1-164-360-11 CERAMIC CHIP 0.1uF 16V C405 1-164-360-11 CERAMIC CHIP 0.1uF 16V
< CONNECTOR >
CN201 1-784-833-51 CONNECTOR, FFC (LIF (NON-ZIF)) 21P CN301 1-770-425-51 CONNECTOR, FFC/FPC 16P
< IC >
IC101 6-712-622-01 IC TC94A70FG-006 (D, HZ IC201 6-710-808-01 IC TK63115SCL-G@GT IC401 6-710-637-01 IC BA5826SFP-E2
BT CD
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
60
< TRANSISTOR >
Q301 6-551-120-01 TRANSISTOR 2SA2119K
< RESISTOR >
R101 1-216-813-11 METAL CHIP 220 5% 1/10W R102 1-216-833-11 METAL CHIP 10K 5% 1/10W R104 1-216-295-91 SHORT CHIP 0 R105 1-216-857-11 METAL CHIP 1M 5% 1/10W R106 1-216-821-11 METAL CHIP 1K 5% 1/10W
R108 1-216-864-11 SHORT CHIP 0 R110 1-216-833-11 METAL CHIP 10K 5% 1/10W R111 1-216-809-11 METAL CHIP 100 5% 1/10W R112 1-216-809-11 METAL CHIP 100 5% 1/10W R113 1-216-833-11 METAL CHIP 10K 5% 1/10W
R114 1-216-833-11 METAL CHIP 10K 5% 1/10W R118 1-216-845-11 METAL CHIP 100K 5% 1/10W R120 1-216-864-11 SHORT CHIP 0 R125 1-216-864-11 SHORT CHIP 0 R126 1-216-864-11 SHORT CHIP 0
R127 1-216-864-11 SHORT CHIP 0 R128 1-216-853-11 METAL CHIP 470K 5% 1/10W R129 1-216-821-11 METAL CHIP 1K 5% 1/10W R130 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R134 1-216-857-11 METAL CHIP 1M 5% 1/10W
R135 1-216-853-11 METAL CHIP 470K 5% 1/10W R136 1-216-837-11 METAL CHIP 22K 5% 1/10W R139 1-216-841-11 METAL CHIP 47K 5% 1/10W R140 1-216-864-11 SHORT CHIP 0 R142 1-216-837-11 METAL CHIP 22K 5% 1/10W
R143 1-216-841-11 METAL CHIP 47K 5% 1/10W R144 1-216-837-11 METAL CHIP 22K 5% 1/10W R145 1-216-864-11 SHORT CHIP 0 R146 1-216-864-11 SHORT CHIP 0 R147 1-216-864-11 SHORT CHIP 0
R148 1-216-864-11 SHORT CHIP 0 R149 1-216-864-11 SHORT CHIP 0 R150 1-216-864-11 SHORT CHIP 0 R151 1-216-864-11 SHORT CHIP 0 R153 1-216-857-11 METAL CHIP 1M 5% 1/10W
R154 1-216-857-11 METAL CHIP 1M 5% 1/10W R155 1-216-805-11 METAL CHIP 47 5% 1/10W R156 1-216-809-11 METAL CHIP 100 5% 1/10W R157 1-216-809-11 METAL CHIP 100 5% 1/10W R201 1-216-295-91 SHORT CHIP 0
R202 1-216-295-91 SHORT CHIP 0 R203 1-216-809-11 METAL CHIP 100 5% 1/10W R204 1-216-809-11 METAL CHIP 100 5% 1/10W R205 1-216-809-11 METAL CHIP 100 5% 1/10W R206 1-216-809-11 METAL CHIP 100 5% 1/10W
R207 1-216-809-11 METAL CHIP 100 5% 1/10W R208 1-216-809-11 METAL CHIP 100 5% 1/10W R209 1-216-809-11 METAL CHIP 100 5% 1/10W R210 1-216-809-11 METAL CHIP 100 5% 1/10W R211 1-216-809-11 METAL CHIP 100 5% 1/10W
R212 1-216-809-11 METAL CHIP 100 5% 1/10W R218 1-216-845-11 METAL CHIP 100K 5% 1/10W R219 1-216-845-11 METAL CHIP 100K 5% 1/10W R220 1-216-845-11 METAL CHIP 100K 5% 1/10W R221 1-216-845-11 METAL CHIP 100K 5% 1/10W
R222 1-216-845-11 METAL CHIP 100K 5% 1/10W R223 1-216-845-11 METAL CHIP 100K 5% 1/10W R301 1-216-845-11 METAL CHIP 100K 5% 1/10W R302 1-216-864-11 SHORT CHIP 0 R303 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R304 1-216-789-11 METAL CHIP 2.2 5% 1/10W R402 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R405 1-216-833-11 METAL CHIP 10K 5% 1/10W R408 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R414 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R415 1-216-841-11 METAL CHIP 47K 5% 1/10W
< VIBRATOR >
X102 1-795-101-21 VIBRATOR, CERAMIC (16.9344MHz)*************************************************************
HP BOARD *********
< CAPACITOR >
C131 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C231 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C531 1-162-974-11 CERAMIC CHIP 0.01uF 50V C581 1-162-974-11 CERAMIC CHIP 0.01uF 50V
< JACK >
J301 1-566-822-51 JACK (AUDIO IN) J500 1-815-629-21 JACK (PHONES)
< RESISTOR >
R132 1-216-841-11 METAL CHIP 47K 5% 1/10W R133 1-216-821-11 METAL CHIP 1K 5% 1/10W R232 1-216-841-11 METAL CHIP 47K 5% 1/10W R233 1-216-821-11 METAL CHIP 1K 5% 1/10W R531 1-216-817-11 METAL CHIP 470 5% 1/10W
R532 1-216-817-11 METAL CHIP 470 5% 1/10W R533 1-216-817-11 METAL CHIP 470 5% 1/10W R534 1-216-817-11 METAL CHIP 470 5% 1/10W R535 1-216-817-11 METAL CHIP 470 5% 1/10W R536 1-216-817-11 METAL CHIP 470 5% 1/10W
R537 1-216-833-11 METAL CHIP 10K 5% 1/10W R538 1-216-833-11 METAL CHIP 10K 5% 1/10W R539 1-216-833-11 METAL CHIP 10K 5% 1/10W R540 1-216-833-11 METAL CHIP 10K 5% 1/10W R581 1-216-817-11 METAL CHIP 470 5% 1/10W
R582 1-216-817-11 METAL CHIP 470 5% 1/10W R583 1-216-817-11 METAL CHIP 470 5% 1/10W R584 1-216-817-11 METAL CHIP 470 5% 1/10W R585 1-216-817-11 METAL CHIP 470 5% 1/10W R586 1-216-817-11 METAL CHIP 470 5% 1/10W
R587 1-216-833-11 METAL CHIP 10K 5% 1/10W R588 1-216-833-11 METAL CHIP 10K 5% 1/10W R589 1-216-833-11 METAL CHIP 10K 5% 1/10W R590 1-216-833-11 METAL CHIP 10K 5% 1/10W*************************************************************
CD HP
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
6161
A-1466-251-A IP BOARD, COMPLETE ******************
< CAPACITOR >
C101 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C102 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C103 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C104 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C105 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C108 1-165-989-11 CERAMIC CHIP 10uF 10% 6.3V C109 1-128-392-11 ELECT CHIP 470uF 20% 6.3V C111 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C114 1-128-004-11 ELECT CHIP 10uF 20% 16V C115 1-128-004-11 ELECT CHIP 10uF 20% 16V
C118 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C119 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C120 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
< CONNECTOR >
CN101 1-766-382-21 PIN, CONNECTOR (1.5MM) (SMD) 10P CN102 1-820-701-11 PIN, CONNECTOR 30P (iPod)
< DIODE >
D102 8-719-071-34 DIODE RB521S-30-TE61 D104 8-719-071-34 DIODE RB521S-30-TE61
< IC >
IC101 6-807-873-01 IC R5F21246SN060FP IC102 6-702-302-01 IC TK11133CSCL-G IC103 6-707-593-01 IC PST3641UL
< TRANSISTOR >
Q102 6-551-750-01 TRANSISTOR 2SD2114KT146W Q103 6-551-750-01 TRANSISTOR 2SD2114KT146W Q104 6-551-750-01 TRANSISTOR 2SD2114KT146W Q105 6-551-750-01 TRANSISTOR 2SD2114KT146W Q106 8-729-028-73 TRANSISTOR DTA114EUA-T106
< RESISTOR >
R101 1-216-809-11 METAL CHIP 100 5% 1/10W R102 1-216-809-11 METAL CHIP 100 5% 1/10W R103 1-216-809-11 METAL CHIP 100 5% 1/10W R104 1-216-809-11 METAL CHIP 100 5% 1/10W R105 1-216-833-11 METAL CHIP 10K 5% 1/10W
R106 1-218-892-11 METAL CHIP 75K 0.5% 1/10W R107 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R108 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R109 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R110 1-218-895-11 METAL CHIP 100K 0.5% 1/10W
R111 1-218-892-11 METAL CHIP 75K 0.5% 1/10W R112 1-218-903-11 METAL CHIP 220K 0.5% 1/10W R113 1-218-907-11 METAL CHIP 330K 0.5% 1/10W R114 1-216-809-11 METAL CHIP 100 5% 1/10W R115 1-216-809-11 METAL CHIP 100 5% 1/10W
R117 1-216-839-11 METAL CHIP 33K 5% 1/10W R118 1-216-864-11 SHORT CHIP 0 R122 1-216-833-11 METAL CHIP 10K 5% 1/10W R132 1-216-833-11 METAL CHIP 10K 5% 1/10W R135 1-216-833-11 METAL CHIP 10K 5% 1/10W
R136 1-216-809-11 METAL CHIP 100 5% 1/10W
R137 1-216-809-11 METAL CHIP 100 5% 1/10W R138 1-216-809-11 METAL CHIP 100 5% 1/10W R139 1-216-845-11 METAL CHIP 100K 5% 1/10W R140 1-216-845-11 METAL CHIP 100K 5% 1/10W
R141 1-216-821-11 METAL CHIP 1K 5% 1/10W R142 1-216-821-11 METAL CHIP 1K 5% 1/10W R143 1-216-821-11 METAL CHIP 1K 5% 1/10W R144 1-216-821-11 METAL CHIP 1K 5% 1/10W R146 1-216-833-11 METAL CHIP 10K 5% 1/10W
R147 1-216-845-11 METAL CHIP 100K 5% 1/10W R148 1-216-845-11 METAL CHIP 100K 5% 1/10W R149 1-216-809-11 METAL CHIP 100 5% 1/10W R150 1-216-833-11 METAL CHIP 10K 5% 1/10W
< VIBRATOR >
X101 1-795-375-11 VIBRATOR, CERAMIC (20MHz)*************************************************************
A-1444-382-A MAIN BOARD, COMPLETE (BX20i: US, CND) A-1456-502-A MAIN BOARD, COMPLETE (BX50BTi) A-1510-697-A MAIN BOARD, COMPLETE (BX20i: SP) A-1527-091-A MAIN BOARD, COMPLETE (BX20i: AUS) *********************
< CAPACITOR >
C101 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C102 1-126-960-11 ELECT 1uF 20% 50V C103 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C104 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C108 1-126-961-11 ELECT 2.2uF 20% 50V
C109 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C110 1-126-963-11 ELECT 4.7uF 20% 50V
(BX50BTi) C111 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C113 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C114 1-126-960-11 ELECT 1uF 20% 50V
(BX50BTi)
C115 1-126-960-11 ELECT 1uF 20% 50V(BX50BTi)
C116 1-126-963-11 ELECT 4.7uF 20% 50V C117 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C118 1-126-963-11 ELECT 4.7uF 20% 50V
(BX50BTi) C119 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V
C120 1-126-960-11 ELECT 1uF 20% 50V(BX50BTi)
C122 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C123 1-162-974-11 CERAMIC CHIP 0.01uF 50V C125 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V C126 1-126-960-11 ELECT 1uF 20% 50V
C127 1-126-960-11 ELECT 1uF 20% 50V C130 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C132 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C201 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C202 1-126-960-11 ELECT 1uF 20% 50V
C203 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C204 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C208 1-126-961-11 ELECT 2.2uF 20% 50V C209 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C210 1-126-963-11 ELECT 4.7uF 20% 50V
(BX50BTi)
C211 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
IP MAINVer. 1.1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
62
C213 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C214 1-126-160-11 ELECT 1uF 20% 50V
(BX50BTi) C215 1-126-960-11 ELECT 1uF 20% 50V
(BX50BTi) C216 1-126-963-11 ELECT 4.7uF 20% 50V
C217 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C218 1-126-963-11 ELECT 4.7uF 20% 50V
(BX50BTi) C219 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C220 1-126-160-11 ELECT 1uF 20% 50V
(BX50BTi) C222 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V
C223 1-162-974-11 CERAMIC CHIP 0.01uF 50V C225 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V C226 1-126-960-11 ELECT 1uF 20% 50V C227 1-126-960-11 ELECT 1uF 20% 50V C230 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C232 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C301 1-126-963-11 ELECT 4.7uF 20% 50V C302 1-164-156-11 CERAMIC CHIP 0.1uF 25V C303 1-126-933-11 ELECT 100uF 20% 16V C304 1-124-589-11 ELECT 47uF 20% 16V
C305 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C307 1-124-589-11 ELECT 47uF 20% 16V C308 1-164-156-11 CERAMIC CHIP 0.1uF 25V
(BX50BTi) C309 1-126-933-11 ELECT 100uF 20% 16V
(BX50BTi) C310 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
C311 1-162-919-11 CERAMIC CHIP 22PF 5% 50V C316 1-164-156-11 CERAMIC CHIP 0.1uF 25V C319 1-126-923-91 ELECT 220uF 20% 10V C324 1-126-933-11 ELECT 100uF 20% 16V C330 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C331 1-126-961-11 ELECT 2.2uF 20% 50V(BX50BTi)
C333 1-164-156-11 CERAMIC CHIP 0.1uF 25V C336 1-126-965-91 ELECT 22uF 20% 50V C337 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C338 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C339 1-164-156-11 CERAMIC CHIP 0.1uF 25V C340 1-164-156-11 CERAMIC CHIP 0.1uF 25V C341 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C342 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C344 1-115-456-21 DOUBLE LAYER 0.22F 5.5V
C348 1-164-156-11 CERAMIC CHIP 0.1uF 25V C350 1-126-964-11 ELECT 10uF 20% 50V C351 1-126-933-11 ELECT 100uF 20% 16V C352 1-126-947-11 ELECT 47uF 20% 35V C355 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C359 1-164-156-11 CERAMIC CHIP 0.1uF 25V C361 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C362 1-164-156-11 CERAMIC CHIP 0.1uF 25V C363 1-126-933-11 ELECT 100uF 20% 16V C364 1-126-964-11 ELECT 10uF 20% 50V
C365 1-126-935-11 ELECT 470uF 20% 16V C366 1-164-156-11 CERAMIC CHIP 0.1uF 25V C367 1-126-935-11 ELECT 470uF 20% 16V C368 1-164-156-11 CERAMIC CHIP 0.1uF 25V C369 1-126-157-11 ELECT 10uF 20% 16V
C371 1-130-495-00 MYLAR 0.1uF 5% 50V C375 1-130-495-00 MYLAR 0.1uF 5% 50V C377 1-130-495-00 MYLAR 0.1uF 5% 50V C379 1-130-495-00 MYLAR 0.1uF 5% 50V C382 1-164-156-11 CERAMIC CHIP 0.1uF 25V
(BX50BTi)
C386 1-104-662-91 ELECT 22uF 20% 25V C387 1-124-589-11 ELECT 47uF 20% 16V C389 1-125-972-91 ELECT 100uF 20% 16V
(BX50BTi) C391 1-126-925-91 ELECT 470uF 20% 10V C394 1-126-961-11 ELECT 2.2uF 20% 50V
C395 1-126-961-11 ELECT 2.2uF 20% 50V(BX50BTi)
C498 1-164-156-11 CERAMIC CHIP 0.1uF 25V C499 1-164-156-11 CERAMIC CHIP 0.1uF 25V C766 1-107-726-91 CERAMIC CHIP 0.01uF 10% 16V
< CONNECTOR >
CN301 1-784-770-11 CONNECTOR, FFC 9P CN305 1-779-289-11 CONNECTOR, FFC (LIF (NON-ZIF)) 21P CN306 1-784-774-11 CONNECTOR, FFC 13P CN309 1-568-826-11 CONNECTOR, FFC 7P CN310 1-784-731-11 CONNECTOR, FFC 9P
CN311 1-779-273-11 CONNECTOR, FFC (LIF (NON-ZIF)) 5P0 CN312 1-819-134-11 PIN, CONNECTOR 6P CN313 1-819-145-11 PIN, CONNECTOR 3P CN316 1-819-136-11 PIN, CONNECTOR 8P CN322 1-815-445-11 PIN, CONNECTOR (PWB) 4P
CN323 1-779-283-11 CONNECTOR, FFC (LIF (NON-ZIF)) 15P (BX50BTi)
* CN325 1-815-451-11 PIN, CONNECTOR (PWB) 10P
< DIODE >
D302 6-501-163-01 DIODE UDZW-TE17-3.6B D303 6-500-334-01 DIODE MC2836-T112-1 D304 6-501-164-01 DIODE UDZW-TE17-3.9B D309 6-501-817-01 DIODE MA2J1110GLS0 D313 6-500-335-01 DIODE MC2838-T112-1
D318 6-501-582-01 DIODE 1N4002-B5 D319 6-501-579-01 DIODE MC2837 D320 6-501-579-01 DIODE MC2837 D321 6-501-582-01 DIODE 1N4002-B5 D322 6-500-334-01 DIODE MC2836-T112-1
D323 6-501-582-01 DIODE 1N4002-B5 D325 6-501-817-01 DIODE MA2J1110GLS0 D329 6-501-817-01 DIODE MA2J1110GLS0 D330 6-501-817-01 DIODE MA2J1110GLS0 D331 6-501-582-01 DIODE 1N4002-B5
D332 6-500-334-01 DIODE MC2836-T112-1 D774 6-500-334-01 DIODE MC2836-T112-1
< EARTH TERMINAL >
EP301 1-537-771-21 TERMINAL BOARD, GROUND EP302 1-537-771-21 TERMINAL BOARD, GROUND
< IC >
IC201 6-710-887-01 IC R5523N001B-TR-F IC301 A-1548-733-A IC R5F3640DDFA (for SERVICE) (BX20i) IC301 A-1548-735-A IC R5F3640DDFA (for SERVICE) (BX50BTi) IC303 8-759-100-96 IC uPC4558G2
MAIN
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
6363
IC304 6-712-055-01 IC BD3499FV-E2
IC307 6-700-830-56 IC KIA7809API IC309 8-759-430-37 IC MC14052BDTR2 (BX50BTi) IC310 6-702-038-11 IC PST3628NR IC311 8-759-598-69 IC BA6956AN IC312 8-759-430-37 IC MC14052BDTR2 (BX50BTi)
< TERMINAL BOARD >
J302 1-780-275-11 TERMINAL BOARD, PUSH (4P) (SPEAKER L/R)
< JUMPER RESISTOR >
JR101 1-216-864-11 SHORT CHIP 0 (BX20i) JR107 1-216-864-11 SHORT CHIP 0 (BX20i) JR201 1-216-864-11 SHORT CHIP 0 (BX20i) JR207 1-216-864-11 SHORT CHIP 0 (BX20i) JR211 1-216-864-11 SHORT CHIP 0
JR213 1-216-864-11 SHORT CHIP 0 JR214 1-216-864-11 SHORT CHIP 0 JR219 1-216-864-11 SHORT CHIP 0 JR221 1-216-864-11 SHORT CHIP 0 JR222 1-216-864-11 SHORT CHIP 0
JR223 1-216-864-11 SHORT CHIP 0 JR301 1-216-864-11 SHORT CHIP 0 JR302 1-216-296-11 SHORT CHIP 0 JR303 1-216-864-11 SHORT CHIP 0 JR304 1-216-864-11 SHORT CHIP 0
JR305 1-216-864-11 SHORT CHIP 0 JR306 1-216-864-11 SHORT CHIP 0 JR307 1-216-864-11 SHORT CHIP 0 JR308 1-216-864-11 SHORT CHIP 0 JR309 1-216-864-11 SHORT CHIP 0
JR312 1-216-864-11 SHORT CHIP 0 JR313 1-216-864-11 SHORT CHIP 0 JR314 1-216-864-11 SHORT CHIP 0 JR315 1-216-864-11 SHORT CHIP 0 JR316 1-216-864-11 SHORT CHIP 0
JR317 1-216-864-11 SHORT CHIP 0 JR318 1-216-296-11 SHORT CHIP 0 JR319 1-216-296-11 SHORT CHIP 0 JR320 1-216-864-11 SHORT CHIP 0 JR321 1-216-296-11 SHORT CHIP 0
JR322 1-216-296-11 SHORT CHIP 0 JR323 1-216-864-11 SHORT CHIP 0 JR324 1-216-864-11 SHORT CHIP 0 JR325 1-216-864-11 SHORT CHIP 0 JR326 1-216-864-11 SHORT CHIP 0
JR327 1-216-864-11 SHORT CHIP 0 JR328 1-216-864-11 SHORT CHIP 0 JR329 1-216-296-11 SHORT CHIP 0 JR330 1-216-864-11 SHORT CHIP 0 JR331 1-216-864-11 SHORT CHIP 0
JR332 1-216-864-11 SHORT CHIP 0 JR333 1-216-864-11 SHORT CHIP 0 JR334 1-216-864-11 SHORT CHIP 0 JR335 1-216-864-11 SHORT CHIP 0 JR336 1-216-864-11 SHORT CHIP 0
JR337 1-216-864-11 SHORT CHIP 0 JR340 1-216-864-11 SHORT CHIP 0 JR341 1-216-864-11 SHORT CHIP 0 JR342 1-216-296-11 SHORT CHIP 0
JR343 1-216-296-11 SHORT CHIP 0
JR344 1-216-296-11 SHORT CHIP 0 JR345 1-216-296-11 SHORT CHIP 0 JR498 1-216-864-11 SHORT CHIP 0
< COIL >
L101 1-422-009-13 COIL, AIR-CORE L201 1-422-009-13 COIL, AIR-CORE
< TRANSISTOR >
Q103 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q203 6-550-889-01 TRANSISTOR 2SC5938-T112-1B Q301 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q302 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q303 8-729-027-38 TRANSISTOR DTA144EKA-T146
Q304 8-729-037-03 TRANSISTOR KTA1266GR-AT Q305 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q306 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q307 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q309 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q310 8-729-027-43 TRANSISTOR DTC114EKA-T146 (BX50BTi) Q312 8-729-038-28 TRANSISTOR RT1N441C-TP-1 Q313 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF Q315 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q316 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q317 8-729-037-03 TRANSISTOR KTA1266GR-AT Q319 8-729-027-43 TRANSISTOR DTC114EKA-T146 (BX50BTi) Q320 8-729-027-43 TRANSISTOR DTC114EKA-T146 (BX50BTi) Q333 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q338 8-729-027-43 TRANSISTOR DTC114EKA-T146
Q340 8-729-027-43 TRANSISTOR DTC114EKA-T146 Q341 8-729-027-38 TRANSISTOR DTA144EKA-T146 Q342 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF Q343 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q344 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q345 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q347 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q348 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q390 8-729-028-54 TRANSISTOR KTC3205 Q392 8-729-036-86 TRANSISTOR KTC3203Y-AT
Q393 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
< RESISTOR >
R101 1-216-825-11 METAL CHIP 2.2K 5% 1/10W(BX20i)
R101 1-216-829-11 METAL CHIP 4.7K 5% 1/10W(BX50BTi)
R102 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R103 1-216-841-11 METAL CHIP 47K 5% 1/10W R104 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R105 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R106 1-216-841-11 METAL CHIP 47K 5% 1/10W R107 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX50BTi) R108 1-216-841-11 METAL CHIP 47K 5% 1/10W
(BX50BTi) R109 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R110 1-216-837-11 METAL CHIP 22K 5% 1/10W R111 1-216-845-11 METAL CHIP 100K 5% 1/10W
(BX50BTi)
MAIN
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
64
R112 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R113 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R114 1-216-841-11 METAL CHIP 47K 5% 1/10W(BX50BTi)
R115 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R116 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R117 1-216-841-11 METAL CHIP 47K 5% 1/10W R119 1-216-845-11 METAL CHIP 100K 5% 1/10W
(BX50BTi) R120 1-216-845-11 METAL CHIP 100K 5% 1/10W
(BX50BTi)
R121 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R122 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R123 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R124 1-216-837-11 METAL CHIP 22K 5% 1/10W R125 1-216-837-11 METAL CHIP 22K 5% 1/10W
R126 1-216-837-11 METAL CHIP 22K 5% 1/10W R128 1-216-821-11 METAL CHIP 1K 5% 1/10W R129 1-216-793-11 METAL CHIP 4.7 5% 1/10W R130 1-216-793-11 METAL CHIP 4.7 5% 1/10W R131 1-216-837-11 METAL CHIP 22K 5% 1/10W
R134 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R153 1-260-304-51 CARBON 10 5% 1/2W R201 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(BX20i) R201 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX50BTi) R202 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R203 1-216-841-11 METAL CHIP 47K 5% 1/10W R204 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R205 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R206 1-216-841-11 METAL CHIP 47K 5% 1/10W R207 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX50BTi)
R208 1-216-841-11 METAL CHIP 47K 5% 1/10W(BX50BTi)
R209 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R210 1-216-837-11 METAL CHIP 22K 5% 1/10W R211 1-216-845-11 METAL CHIP 100K 5% 1/10W
(BX50BTi) R212 1-216-845-11 METAL CHIP 100K 5% 1/10W
(BX50BTi)
R213 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R214 1-216-841-11 METAL CHIP 47K 5% 1/10W(BX50BTi)
R215 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R216 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R217 1-216-841-11 METAL CHIP 47K 5% 1/10W
R219 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R220 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R221 1-216-845-11 METAL CHIP 100K 5% 1/10W(BX50BTi)
R222 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R223 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R224 1-216-837-11 METAL CHIP 22K 5% 1/10W R225 1-216-837-11 METAL CHIP 22K 5% 1/10W R226 1-216-837-11 METAL CHIP 22K 5% 1/10W R227 1-216-837-11 METAL CHIP 22K 5% 1/10W R228 1-216-821-11 METAL CHIP 1K 5% 1/10W
R229 1-216-793-11 METAL CHIP 4.7 5% 1/10W R230 1-216-793-11 METAL CHIP 4.7 5% 1/10W R231 1-216-837-11 METAL CHIP 22K 5% 1/10W R234 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R253 1-260-304-51 CARBON 10 5% 1/2W
R301 1-216-830-11 METAL CHIP 5.6K 5% 1/10W R302 1-216-845-11 METAL CHIP 100K 5% 1/10W R303 1-216-845-11 METAL CHIP 100K 5% 1/10W R307 1-216-821-11 METAL CHIP 1K 5% 1/10W R308 1-249-401-11 CARBON 47 5% 1/4W
R309 1-216-809-11 METAL CHIP 100 5% 1/10W R311 1-216-841-11 METAL CHIP 47K 5% 1/10W R312 1-249-401-11 CARBON 47 5% 1/4W R313 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R314 1-249-401-11 CARBON 47 5% 1/4W
R315 1-216-845-11 METAL CHIP 100K 5% 1/10W R316 1-216-845-11 METAL CHIP 100K 5% 1/10W R317 1-216-841-11 METAL CHIP 47K 5% 1/10W R344 1-216-809-11 METAL CHIP 100 5% 1/10W R345 1-216-841-11 METAL CHIP 47K 5% 1/10W
R347 1-216-853-11 METAL CHIP 470K 5% 1/10W R348 1-216-837-11 METAL CHIP 22K 5% 1/10W R349 1-216-857-11 METAL CHIP 1M 5% 1/10W R356 1-216-841-11 METAL CHIP 47K 5% 1/10W R359 1-216-833-11 METAL CHIP 10K 5% 1/10W
(BX50BTi)
R360 1-216-833-11 METAL CHIP 10K 5% 1/10W(BX50BTi)
R361 1-216-825-11 METAL CHIP 2.2K 5% 1/10W(BX50BTi)
R362 1-216-825-11 METAL CHIP 2.2K 5% 1/10W(BX50BTi)
R364 1-216-809-11 METAL CHIP 100 5% 1/10W R396 1-216-837-11 METAL CHIP 22K 5% 1/10W
R403 1-216-819-11 METAL CHIP 680 5% 1/10W R404 1-216-819-11 METAL CHIP 680 5% 1/10W R406 1-216-849-11 METAL CHIP 220K 5% 1/10W R407 1-216-864-11 SHORT CHIP 0 R408 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R409 1-216-841-11 METAL CHIP 47K 5% 1/10W R410 1-216-845-11 METAL CHIP 100K 5% 1/10W R411 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R412 1-216-833-11 METAL CHIP 10K 5% 1/10W R413 1-216-841-11 METAL CHIP 47K 5% 1/10W
R414 1-216-805-11 METAL CHIP 47 5% 1/10W R415 1-216-833-11 METAL CHIP 10K 5% 1/10W R416 1-216-841-11 METAL CHIP 47K 5% 1/10W R417 1-216-833-11 METAL CHIP 10K 5% 1/10W R418 1-216-864-11 SHORT CHIP 0
R419 1-216-841-11 METAL CHIP 47K 5% 1/10W R420 1-216-841-11 METAL CHIP 47K 5% 1/10W R421 1-216-833-11 METAL CHIP 10K 5% 1/10W R422 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R424 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R425 1-216-845-11 METAL CHIP 100K 5% 1/10W
MAIN
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
6565
R427 1-216-837-11 METAL CHIP 22K 5% 1/10W R428 1-216-821-11 METAL CHIP 1K 5% 1/10W R429 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R430 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R431 1-216-841-11 METAL CHIP 47K 5% 1/10W R432 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX20i) R433 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX20i) R435 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R436 1-216-837-11 METAL CHIP 22K 5% 1/10W
R439 1-216-841-11 METAL CHIP 47K 5% 1/10W R441 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R447 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R448 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R449 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R450 1-216-789-11 METAL CHIP 2.2 5% 1/10W R452 1-216-833-11 METAL CHIP 10K 5% 1/10W
(BX50BTi) R453 1-216-809-11 METAL CHIP 100 5% 1/10W
(BX50BTi) R455 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(BX50BTi) R456 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(BX50BTi)
R458 1-216-841-11 METAL CHIP 47K 5% 1/10W R459 1-216-805-11 METAL CHIP 47 5% 1/10W R460 1-216-805-11 METAL CHIP 47 5% 1/10W R461 1-216-841-11 METAL CHIP 47K 5% 1/10W R462 1-216-821-11 METAL CHIP 1K 5% 1/10W
R463 1-216-833-11 METAL CHIP 10K 5% 1/10W R464 1-216-833-11 METAL CHIP 10K 5% 1/10W R465 1-216-841-11 METAL CHIP 47K 5% 1/10W R466 1-216-841-11 METAL CHIP 47K 5% 1/10W R467 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R468 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (EXCEPT BX20i: SP)
R468 1-216-864-11 SHORT CHIP 0 (BX20i: SP) R469 1-216-845-11 METAL CHIP 100K 5% 1/10W R470 1-216-845-11 METAL CHIP 100K 5% 1/10W R471 1-216-833-11 METAL CHIP 10K 5% 1/10W
R472 1-216-821-11 METAL CHIP 1K 5% 1/10W R473 1-216-833-11 METAL CHIP 10K 5% 1/10W R475 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R477 1-216-821-11 METAL CHIP 1K 5% 1/10W R478 1-216-833-11 METAL CHIP 10K 5% 1/10W
R479 1-216-809-11 METAL CHIP 100 5% 1/10W(BX50BTi)
R481 1-216-805-11 METAL CHIP 47 5% 1/10W R482 1-216-797-11 METAL CHIP 10 5% 1/10W R484 1-216-849-11 METAL CHIP 220K 5% 1/10W R485 1-216-845-11 METAL CHIP 100K 5% 1/10W
R486 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R487 1-216-833-11 METAL CHIP 10K 5% 1/10W R488 1-216-833-11 METAL CHIP 10K 5% 1/10W R489 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R492 1-216-833-11 METAL CHIP 10K 5% 1/10W
R493 1-216-833-11 METAL CHIP 10K 5% 1/10W R494 1-216-833-11 METAL CHIP 10K 5% 1/10W R495 1-216-809-11 METAL CHIP 100 5% 1/10W R496 1-216-845-11 METAL CHIP 100K 5% 1/10W R498 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R500 1-216-837-11 METAL CHIP 22K 5% 1/10W R511 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R600 1-216-837-11 METAL CHIP 22K 5% 1/10W R611 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R700 1-216-809-11 METAL CHIP 100 5% 1/10W
R701 1-216-809-11 METAL CHIP 100 5% 1/10W R702 1-216-809-11 METAL CHIP 100 5% 1/10W R703 1-216-809-11 METAL CHIP 100 5% 1/10W R704 1-216-809-11 METAL CHIP 100 5% 1/10W R705 1-216-809-11 METAL CHIP 100 5% 1/10W
R706 1-216-809-11 METAL CHIP 100 5% 1/10W R709 1-216-833-11 METAL CHIP 10K 5% 1/10W R711 1-216-849-11 METAL CHIP 220K 5% 1/10W R713 1-216-864-11 SHORT CHIP 0 R716 1-216-864-11 SHORT CHIP 0
R717 1-216-833-11 METAL CHIP 10K 5% 1/10W R719 1-216-809-11 METAL CHIP 100 5% 1/10W R720 1-216-841-11 METAL CHIP 47K 5% 1/10W R722 1-216-809-11 METAL CHIP 100 5% 1/10W R724 1-216-809-11 METAL CHIP 100 5% 1/10W
R725 1-216-809-11 METAL CHIP 100 5% 1/10W R726 1-216-809-11 METAL CHIP 100 5% 1/10W R727 1-216-809-11 METAL CHIP 100 5% 1/10W R728 1-216-809-11 METAL CHIP 100 5% 1/10W R731 1-216-809-11 METAL CHIP 100 5% 1/10W
R732 1-216-809-11 METAL CHIP 100 5% 1/10W R733 1-216-809-11 METAL CHIP 100 5% 1/10W R734 1-216-809-11 METAL CHIP 100 5% 1/10W R741 1-216-833-11 METAL CHIP 10K 5% 1/10W R744 1-216-809-11 METAL CHIP 100 5% 1/10W
(BX50BTi)
R745 1-216-809-11 METAL CHIP 100 5% 1/10W(BX50BTi)
R746 1-216-833-11 METAL CHIP 10K 5% 1/10W R747 1-216-809-11 METAL CHIP 100 5% 1/10W R748 1-216-809-11 METAL CHIP 100 5% 1/10W R753 1-216-809-11 METAL CHIP 100 5% 1/10W
R757 1-216-809-11 METAL CHIP 100 5% 1/10W R759 1-216-809-11 METAL CHIP 100 5% 1/10W R760 1-216-809-11 METAL CHIP 100 5% 1/10W R766 1-216-849-11 METAL CHIP 220K 5% 1/10W R768 1-216-809-11 METAL CHIP 100 5% 1/10W
R769 1-216-809-11 METAL CHIP 100 5% 1/10W R770 1-216-809-11 METAL CHIP 100 5% 1/10W R773 1-216-809-11 METAL CHIP 100 5% 1/10W R774 1-216-857-11 METAL CHIP 1M 5% 1/10W R777 1-216-809-11 METAL CHIP 100 5% 1/10W
R778 1-216-809-11 METAL CHIP 100 5% 1/10W R780 1-216-809-11 METAL CHIP 100 5% 1/10W R781 1-216-809-11 METAL CHIP 100 5% 1/10W R782 1-216-809-11 METAL CHIP 100 5% 1/10W R783 1-216-809-11 METAL CHIP 100 5% 1/10W
R784 1-216-809-11 METAL CHIP 100 5% 1/10W R785 1-216-809-11 METAL CHIP 100 5% 1/10W R786 1-216-821-11 METAL CHIP 1K 5% 1/10W
(BX20i: US, CND/BX50BTi) R786 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(BX20i: AUS) R789 1-216-821-11 METAL CHIP 1K 5% 1/10W
MAINVer. 1.1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
66
R791 1-216-809-11 METAL CHIP 100 5% 1/10W R792 1-216-809-11 METAL CHIP 100 5% 1/10W R793 1-216-809-11 METAL CHIP 100 5% 1/10W
< VIBRATOR >
X301 1-814-067-11 OSCILLATOR, CRYSTAL (32.768kHz) X302 1-814-062-21 VIBRATOR, CERAMIC (5MHz)*************************************************************
MOTOR BOARD ************
< CONNECTOR >
CN001 1-779-542-21 CONNECTOR, FFC (LIF (NON-ZIF)) 5P
< SWITCH >
S001 1-786-509-11 SWITCH, ROTARY(DISC TRAY OPEN/CLOSE DETECT)
*************************************************************
PANEL BOARD ************
< CAPACITOR >
C804 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C805 1-126-947-11 ELECT 47uF 20% 35V C811 1-162-974-11 CERAMIC CHIP 0.01uF 50V C812 1-162-974-11 CERAMIC CHIP 0.01uF 50V C814 1-126-965-91 ELECT 22uF 20% 50V
C815 1-126-965-91 ELECT 22uF 20% 50V C816 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C841 1-164-156-11 CERAMIC CHIP 0.1uF 25V C907 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C908 1-162-974-11 CERAMIC CHIP 0.01uF 50V
C909 1-126-967-11 ELECT 47uF 20% 50V C910 1-162-974-11 CERAMIC CHIP 0.01uF 50V C917 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C918 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C919 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C920 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C924 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
< DIODE >
D807 6-501-169-01 DIODE UDZW-TE17-6.2B D902 6-501-483-01 LED SLR-325VCT31P (STANDBY) D903 6-501-539-01 LED SELK5E20C-DTP15
(BLUETOOTH OPR) (BX50BTi) D904 6-500-334-01 DIODE MC2836-T112-1 D905 6-500-335-01 DIODE MC2838-T112-1
D915 6-500-335-01 DIODE MC2838-T112-1
< FERRITE BEAD >
FB901 1-414-235-22 INDUCTOR, FERRITE BEAD
< FLUORESCENT INDICATOR TUBE >
FL901 1-519-993-21 INDICATOR TUBE, FLUORESCENT
< IC >
IC901 6-600-349-31 IC NJL24H400A IC902 6-711-008-01 IC PT6302LQ-010
< COIL >
L901 1-410-645-31 INDUCTOR 100uH
< TRANSISTOR >
Q901 8-729-027-38 TRANSISTOR DTA144EKA-T146 Q902 8-729-027-43 TRANSISTOR DTC114EKA-T146 (BX50BTi) Q903 6-550-065-01 TRANSISTOR CPH5504-TL-E Q905 8-729-120-28 TRANSISTOR 2SC1623-L5L6
< RESISTOR >
R851 1-216-821-11 METAL CHIP 1K 5% 1/10W R852 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R919 1-216-864-11 SHORT CHIP 0 R920 1-216-864-11 SHORT CHIP 0 R921 1-216-805-11 METAL CHIP 47 5% 1/10W
R922 1-216-805-11 METAL CHIP 47 5% 1/10W R925 1-216-817-11 METAL CHIP 470 5% 1/10W R926 1-216-821-11 METAL CHIP 1K 5% 1/10W
(BX50BTi) R927 1-216-821-11 METAL CHIP 1K 5% 1/10W
(BX50BTi) R928 1-216-821-11 METAL CHIP 1K 5% 1/10W
(BX50BTi)
R929 1-216-789-11 METAL CHIP 2.2 5% 1/10W R930 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R931 1-216-833-11 METAL CHIP 10K 5% 1/10W R932 1-216-809-11 METAL CHIP 100 5% 1/10W R933 1-216-809-11 METAL CHIP 100 5% 1/10W
R934 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R935 1-216-821-11 METAL CHIP 1K 5% 1/10W R936 1-216-864-11 SHORT CHIP 0 R937 1-216-864-11 SHORT CHIP 0 R938 1-216-864-11 SHORT CHIP 0
R942 1-216-833-11 METAL CHIP 10K 5% 1/10W R943 1-216-837-11 METAL CHIP 22K 5% 1/10W R944 1-216-821-11 METAL CHIP 1K 5% 1/10W
< SWITCH >
S801 1-762-875-21 SWITCH, KEYBOARD (POWER, I/1)(BX20i: US, CND/BX50BTi)
S801 1-771-410-21 SWITCH, TACTILE (POWER, I/1) (BX20i: AUS, SP)
S802 1-762-875-21 SWITCH, KEYBOARD (BLUETOOTH OPR)(BX50BTi)
S803 1-762-875-21 SWITCH, KEYBOARD (OPEN/CLOSE, A)(BX20i: US, CND/BX50BTi)
S803 1-771-410-21 SWITCH, TACTILE (OPEN/CLOSE, A)(BX20i: AUS, SP)
< TRANSFORMER >
T801 1-445-365-11 TRANSFORMER, DC-DC CONVERTER*************************************************************
POWER BOARD *************
< CAPACITOR >
C901 1-165-621-91 CERAMIC CHIP 0.1uF 50V C902 1-165-621-91 CERAMIC CHIP 0.1uF 50V C905 1-165-621-91 CERAMIC CHIP 0.1uF 50V C906 1-165-621-91 CERAMIC CHIP 0.1uF 50V
MAIN MOTOR PANEL POWERVer. 1.1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
6767
C914 1-126-964-11 ELECT 10uF 20% 50V
0 C921 1-126-767-51 ELECT 1000uF 20% 16V0 C922 1-126-953-61 ELECT 2200uF 20% 35V0 C923 1-126-953-61 ELECT 2200uF 20% 35V0 C925 1-126-768-11 ELECT 2200uF 20% 16V0 C936 1-126-943-51 ELECT 2200uF 20% 25V
< CONNECTOR >
0 CN901 1-793-660-11 PIN, CONNECTOR (PC BOARD) 3P CN902 1-564-687-11 PIN, CONNECTOR (3.96 mm PITCH) 3P
(BX20i: SP) CN904 1-819-140-11 PIN, CONNECTOR 12P CN905 1-564-687-21 PINCONNECTOR (3.96 mm PITCH) 3P R
(BX20i: SP)
< DIODE >
D906 6-501-817-01 DIODE MA2J1110GLS0 D907 6-500-334-01 DIODE MC2836-T112-1 D908 6-500-335-01 DIODE MC2838-T112-1 D911 6-501-582-01 DIODE 1N4002-B5 D912 6-501-582-01 DIODE 1N4002-B5
D913 6-501-582-01 DIODE 1N4002-B5 D914 6-501-582-01 DIODE 1N4002-B5 D916 6-501-569-01 DIODE 1N5401-C352 D917 6-501-569-01 DIODE 1N5401-C352 D918 6-501-569-01 DIODE 1N5401-C352
D919 6-501-569-01 DIODE 1N5401-C352 D920 6-500-335-01 DIODE MC2838-T112-1 D922 6-501-817-01 DIODE MA2J1110GLS0 D923 6-500-335-01 DIODE MC2838-T112-1 D924 6-501-582-01 DIODE 1N4002-B5
D925 6-501-582-01 DIODE 1N4002-B5 D926 6-501-582-01 DIODE 1N4002-B5 D927 6-501-582-01 DIODE 1N4002-B5
< FUSE HOLDER >
FH901 1-533-233-31 FUSE HOLDER FH902 1-533-233-31 FUSE HOLDER FH903 1-533-233-31 FUSE HOLDER FH904 1-533-233-31 FUSE HOLDER
< LINE FILTER >
0 LF901 1-443-993-11 TRANSFORMER, LINE FILTER (LFT)
< RESISTOR >
R901 1-216-837-11 METAL CHIP 22K 5% 1/10W R902 1-216-837-11 METAL CHIP 22K 5% 1/10W0 R903 1-219-512-22 METAL 2.2M 5% 1/2W F
(BX20i: US, CND/BX50BTi) R904 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R905 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R906 1-216-833-11 METAL CHIP 10K 5% 1/10W R908 1-216-821-11 METAL CHIP 1K 5% 1/10W R909 1-216-821-11 METAL CHIP 1K 5% 1/10W R910 1-216-864-11 SHORT CHIP 0 R911 1-216-864-11 SHORT CHIP 0
< RELAY >
0 RY901 1-755-334-11 RELAY, AC POWER
< TRANSFORMER >
0 T902 1-443-846-11 TRANSFORMER, POWER(BX20i: US, CND/BX50BTi)
0 T902 1-443-908-11 TRANSFORMER, POWER (BX20i: AUS, SP)*************************************************************
TOP KEY BOARD *************
< RESISTOR >
R853 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R854 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R855 1-216-833-11 METAL CHIP 10K 5% 1/10W R856 1-216-835-11 METAL CHIP 15K 5% 1/10W R857 1-216-835-11 METAL CHIP 15K 5% 1/10W
R860 1-216-821-11 METAL CHIP 1K 5% 1/10W R861 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R862 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R863 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R864 1-216-821-11 METAL CHIP 1K 5% 1/10W
R865 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R866 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R867 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R868 1-216-833-11 METAL CHIP 10K 5% 1/10W R869 1-216-833-11 METAL CHIP 10K 5% 1/10W
< SWITCH >
S804 1-762-875-21 SWITCH, KEYBOARD (AUDIO IN) (BX20i: US, CND)
S804 1-762-875-21 SWITCH, KEYBOARD (TUNER/BAND) (BX50BTi) S804 1-771-410-21 SWITCH, TACTILE (AUDIO IN) (BX20i: AUS, SP) S805 1-762-875-21 SWITCH, KEYBOARD (CD u) (BX20i: US, CND) S805 1-762-875-21 SWITCH, KEYBOARD (BLUETOOTH u)
(BX50BTi)
S805 1-771-410-21 SWITCH, TACTILE (CD u) (BX20i: AUS, SP) S806 1-762-875-21 SWITCH, KEYBOARD (iPod u)
(BX20i: US, CND/BX50BTi) S806 1-771-410-21 SWITCH, TACTILE (iPod u) (BX20i: AUS, SP) S807 1-762-875-21 SWITCH, KEYBOARD (TUNER/BAND)
(BX20i: US, CND) S807 1-762-875-21 SWITCH, KEYBOARD (CD u) (BX50BTi)
S807 1-771-410-21 SWITCH, TACTILE (TUNER/BAND) (BX20i: AUS, SP)
S809 1-762-875-21 SWITCH, KEYBOARD (DISPLAY)(BX20i: US, CND/BX50BTi)
S809 1-771-410-21 SWITCH, TACTILE (DISPLAY) (BX20i: AUS, SP) S810 1-762-875-21 SWITCH, KEYBOARD (DSGX)
(BX20i: US, CND/BX50BTi) S810 1-771-410-21 SWITCH, TACTILE (DSGX) (BX20i: AUS, SP)
S811 1-762-875-21 SWITCH, KEYBOARD (x CANCEL)(BX20i: US, CND/BX50BTi)
S811 1-771-410-21 SWITCH, TACTILE (x CANCEL) (BX20i: AUS, SP) S812 1-762-875-21 SWITCH, KEYBOARD (FUNCTION)
(BX20i: US, CND/BX50BTi) S812 1-771-410-21 SWITCH, TACTILE (FUNCTION) (BX20i: AUS, SP) S813 1-762-875-21 SWITCH, KEYBOARD (FOLDER –)
(BX20i: US, CND/BX50BTi)
S813 1-771-410-21 SWITCH, TACTILE (FOLDER –) (BX20i: AUS, SP) S814 1-762-875-21 SWITCH, KEYBOARD (FOLDER +)
(BX20i: US, CND/BX50BTi) S814 1-771-410-21 SWITCH, TACTILE (FOLDER +) (BX20i: AUS, SP) S815 1-762-875-21 SWITCH, KEYBOARD (VOL +)
(BX20i: US, CND/BX50BTi)
POWER TOP KEYVer. 1.1
Ref. No. Part No. Description Remark
HCD-BX20i/BX50BTi
68
S815 1-771-410-21 SWITCH, TACTILE (VOL +) (BX20i: AUS, SP)
S816 1-762-875-21 SWITCH, KEYBOARD (VOL –)(BX20i: US, CND/BX50BTi)
S816 1-771-410-21 SWITCH, TACTILE (VOL –) (BX20i: AUS, SP) S817 1-762-875-21 SWITCH, KEYBOARD (M L, TUNE +)
(BX20i: US, CND/BX50BTi) S817 1-771-410-21 SWITCH, TACTILE (M L, TUNE +)
(BX20i: AUS, SP) S818 1-762-875-21 SWITCH, KEYBOARD (ENTER)
(BX20i: US, CND/BX50BTi)
S818 1-771-410-21 SWITCH, TACTILE (ENTER) (BX20i: AUS, SP) S819 1-762-875-21 SWITCH, KEYBOARD (l m, TUNE –)
(BX20i: US, CND/BX50BTi) S819 1-771-410-21 SWITCH, TACTILE (l m, TUNE –)
(BX20i: AUS, SP) S820 1-762-875-21 SWITCH, KEYBOARD (REPEAT/FM MODE)
(BX20i: US, CND/BX50BTi) S820 1-771-410-21 SWITCH, TACTILE (REPEAT/FM MODE)
(BX20i: AUS, SP)
S821 1-762-875-21 SWITCH, KEYBOARD (PLAY MODE/TUNING MODE)
(BX20i: US, CND/BX50BTi) S821 1-771-410-21 SWITCH, TACTILE (PLAY MODE/TUNING MODE)
(BX20i: AUS, SP)*************************************************************
VOL SELECT BOARD (BX20i: SP) *****************
< SWITCH >
0 S901 1-786-055-31 SELECTOR, VOLTAGE (VOLTAGE SELECTOR)************************************************************
MISCELLANEOUS **************
103 1-834-114-11 CABLE, COAXIAL (WITH U.F.L CON) (BX50BTi) 105 1-831-997-21 CABLE, FLEXIBLE FLAT (13 CORE) 152 1-832-803-21 CABLE, FLEXIBLE FLAT (7 CORE) 156 1-832-811-21 CABLE, FLEXIBLE FLAT (9 CORE) 158 1-693-762-21 TUNER (FM/AM) (BX20i: US, CND/BX50BTi) 158 1-693-764-21 TUNER (FM/AM) (BX20i: AUS, SP)
201 1-832-615-21 CABLE, FLEXIBLE FLAT (21 CORE) 202 1-834-979-21 CABLE, FLEXIBLE FLAT (5P) 208 1-832-584-21 CABLE, FLEXIBLE FLAT (15 CORE) (BX50BTi)0 212 1-834-965-21 CORD, POWER (BX20i: US, CND/BX50BTi)0 212 1-834-966-21 CORD, POWER (BX20i: SP)
0 212 1-834-967-21 CORD, POWER (BX20i: AUS)0 301 A-4735-357-A BASE ASSY, OP (KSM-213D) 302 1-832-404-21 CABLE, FLEXIBLE FLAT (16 CORE)0 F901 1-532-388-33 FUSE (T2AL/250V)0 F902 1-532-388-33 FUSE (T2AL/250V)
0 T901 1-445-187-11 TRANSFORMER, POWER (BX20i: AUS, SP)0 T901 1-445-188-11 TRANSFORMER, POWER
(BX20i: US, CND/BX50BTi) M901 1-787-400-11 D.C. FAN S201 1-771-853-11 SWITCH, DETECTION (LIMIT)*************************************************************
ACCESSORY ***********
0 1-569-008-22 ADAPTOR, CONVERSION 2P (BX20i: SP)
TOP KEY
Note: When exchanging or removing Ref. No. 208, Please be sure to refer to “3-5. FRONT PANEL BLOCK” (Page 12) in SECTION 3 DISESSEMBLY and tnstall it.
Ver. 1.1VOL SELECT
HCD-BX20i/BX50BTi
REVISION HISTORY
Checking the version allows you to jump to the revised page.Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver. Date Description of Revision1.0 2008.02 New
1.1 2008.03 Addition of Singapore model (HCD-BX20i)
Addition of Canadian model (HCD-BX50BTi)
Change of 5VREG, 9VREG, AMP, HP, MAIN, PANEL, POWER and TOP KEY boards (Suffi x-12)
(SMR-08031)