solutions overview - d2w0rqa9ltehy9.cloudfront.net · toshiba low voltage motors eqp global series...
TRANSCRIPT
Tundra Process Solutions Ltd. was founded as an instrumentation and controls specialist in 1999. Tundra has since grown and diversified, and now provides a variety of solutions with a focus on in-house design and integrated packages to suit industrial, light industrial, and commercial process applications.
When it comes to complete turnkey solutions, Tundra specializes in instrumentation & controls, boilers & steam generation, water treatment, motors & drives, valves & actuation, artificial lift, panels & buildings, truck offloading, and train loading.
Tundra recognizes the need for support beyond standard working hours, and Tundra offers 24/7 service to ensure clients are supported all day, every day.
Instrumentation & Controls
Instrumentation & Controls
Pipe, Valves& Actuation
Pipe, Valves& Actuation
Instrumentation & Controls
Pipe, Valves& Actuation
Panels& Buildings
Panels& Buildings
Service& Support
Boilers &Water Treatment
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Motors& Drives
ArtificialLift
Instrumentation & Controls
Pipe, Valves& Actuation
Truck & TrainTransloading
Truck & TrainTransloading
Panels& Buildings
Service& Support
Boilers &Water Treatment
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Truck & TrainTransloading
Tundra Link.indd 4 3/10/15 8:10 PM
Tundra
Divisio
ns
Instrumentation & Controls
Instrumentation & Controls
Pipe, Valves& Actuation
Pipe, Valves& Actuation
Instrumentation & Controls
Pipe, Valves& Actuation
Panels& Buildings
Panels& Buildings
Service& Support
Boilers &Water Treatment
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Motors& Drives
ArtificialLift
Instrumentation & Controls
Pipe, Valves& Actuation
Truck & TrainTransloading
Truck & TrainTransloading
Tundra Link.indd 5 3/10/15 8:10 PMV5920 Tundra Line Card.indd 2 3/10/15 8:16 PM
Originally founded as Tundra Controls Ltd., Tundra Process Solutions Ltd. has been an instrumentation and controls specialist since 1999. Tundra has grown into a full solution provider representing manufacturers specializing in water, boiler, pipe, artifi ial lift, motors & drives, instrumentation, actuation and valve solutions. Additionally, Tundra provides in-house design, custom engineered solutions and integrated packages.
Tundra recognizes that clients need more than just daytime support. Tundra offers 24/7 service to ensure that you’re fully supported all day, every day.
When it comes to a complete turnkey solution, Tundra has you covered!
Instrumentation & Controls
Instrumentation & Controls
Pipe, Valves& Actuation
Pipe, Valves& Actuation
Instrumentation & Controls
Pipe, Valves& Actuation
Panels& Buildings
Panels& Buildings
Service& Support
Boilers &Water Treatment
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Instrumentation & Controls
Pipe, Valves& Actuation
Motors& Drives
Motors& Drives
ArtificialLift
Instrumentation & Controls
Pipe, Valves& Actuation
Truck & TrainTransloading
Truck & TrainTransloading
Tundra Link.indd 4 3/10/15 8:10 PM
Instrumentation & Controls
Instrumentation & Controls
Pipe, Valves& Actuation
Pipe, Valves& Actuation
Instrumentation & Controls
Pipe, Valves& Actuation
Panels& Buildings
Panels& Buildings
Service& Support
Boilers &Water Treatment
Motors& Drives
Instrumentation & Controls
Valves& Actuation
Motors& Drives
Instrumentation & Controls
Valves& Actuation
Motors& Drives
Motors& Drives
ArtificialLift
Instrumentation & Controls
Valves& Actuation
Truck & TrainTransloading
Tundra Link.indd 5 3/10/15 8:10 PMV5920 Tundra Line Card.indd 3 3/10/15 8:16 PM
Truck & TrainOffloading/Loading
WATER TREATMENT
Boilers & Water TreatmentIn addition to world-class packaged boilers, Tundra offers burner and control upgrades to optimize and ensure combustion efficiency as well as CSA B149.3 compliance. Quality valves and steam traps are available for immediate delivery to keep your boiler room running. Tundra’s team of factory trained technicians offer 24/7 service to ensure your system is never down.
Take advantage of Tundra’s “water in, steam out” process guarantee. Combine Veolia water treatment technology with Cleaver-Brooks steam generation to ensure safe, reliable and efficient process operation.
Veolia manufactures world-class water treatment plants and specializes in the Alberta Oil & Gas market. From raw water entering the facility to process water and waste stream management, Veolia products ensure environmental regulatory compliance, energy efficiency and production optimization.
» Comprehensive Water & Wastewater Solutions
» Unique De-oiling Technologies
» Evaporation & Crystallization Technology
» Advanced Filtration Treatment Solutions
» Full Service Water Management Solutions
COMMERCIAL INDUSTRIAL
Tundra Process Solutions is the exclusive distributor for Cleaver-Brooks in Alberta and Saskatchewan. Cleaver-Brooks is leading the industry with research and development of commercial and industrial steam boiler technology and auxiliary equipment for any steam or hot water system. For the oil sands market, the large capacity Cleaver-Brooks forced-circulation oil sands steam generator (FC-OSSG) offers industrial users the benefits of traditional D-style watertube boilers and the ease of cleaning of once-through steam generators (OTSG).
Cleaver-Brooks is the only manufacturer that offers boilers, burners and control systems that are 100% designed, engineered, manufactured and integrated by one company. This design philosophy and ongoing research and development ensures Tundra clients benefit from the latest available technology. All industrial boilers can be custom designed to any specification and will withstand changes in water quality, heat flux and flow.
» Nebraska Model IWT
» Industrial Watertube Boilers, Burners &Heat Recovery Steam Generator (HRSG) Systems
» Ultra Low NOx, Energy Efficient Gas Burners
» FC-OSSG Boilers for Oil Sands
» CBND Steam-Ready Series
wabash
Stacks, Chimneys
Rental Boilers & Equipment
Boiler Solutions, Packaged Burner Systems and Controls
TOSHIBA LOW VOLTAGE MOTORS EQPGLOBAL SERIES
» EQP Global Severe Duty (SD), EQP Global 840 (Mill & Chemical)and EQP Global 841 (Petro-Chemical)
» NEMA Premium® efficiency (1 – 500 HP)
» Low voltage motors (0.5 – 1500 HP)
» Voltages up to 690 VAC
» Speeds from 3600 to 600 RPM (2 pole to 12 pole).Other speeds available if required.
» Dual-frequency 50/60 Hz
» Vertical and horizontal mounting
» Complete range of enclosures:
» Totally Enclosed Fan Cooled (TEFC)
» Totally Enclosed Explosion Proof (TEXP)
» Open Drip Proof (ODP)
» Totally Enclosed Air Over (TEAO)
» Weather Protected (WPI & WPII)
» Global motor specifications including CE, NEMA and IEC
» Multi-mount on 140 through 445 and N449T frames
TOSHIBA MEDIUM VOLTAGE MOTORS
» HP Range 200 – 70,000 HP
» Voltages up to 13,000 V
» Speeds from 3600 to 600 RPM (2 pole to 12 pole). Other speedsavailable if required.
» Complete range of enclosures:
» Weather Protected (WPI & WPII)
» Totally Enclosed Fan Cooled (TEFC)
» Totally Enclosed Air-to-Air Cooled (TEAAC)
» Totally Enclosed Water-to-Air Cooled (TEWAC)
» Totally Enclosed Force-Ventilated (TEFV)
» Open Drip Proof (ODP)
» Vertical and horizontal mounting
» Manufactured to meet worldwide standards (NEMA, IEC, BS, AS)
» Latest edition to API 541, 546, 547 general and special purpose
» Squirrel cage and wound rotor induction motors
» Synchronous motors
MOTORS
Motors & DrivesAs Toshiba’s exclusive partner, Tundra Process Solutions sells and services all Toshiba low and medium voltage motors, adjustable speed drives, motor starters and custom control gear. Toshiba’s reputation is founded on a no-compromise philosophy for product design, manufacturing and after-sales service. With a large in-stock inventory of motors, drives and spare parts, Tundra is able to deliver a quick turnaround time on all products and services. In-house testing and repair services are available and factory trained technicians can be dispatched to site 24/7.
TOSHIBA LOW VOLTAGE ADJUSTABLESPEED DRIVES (ASD)
» Sizes from 0.5 to 1500 HP
» Voltages 230, 460, 575, 690 VAC
» Outdoor installation (NEMA Type 3R, 4, 4X)
» Indoor installation (NEMA Type 1, 3, 12)
» Dual-frequency 50/60 Hz
» Low harmonic solutions
TOSHIBA MEDIUM VOLTAGE ADJUSTABLE SPEED DRIVES (ASD)
» Toshiba T300MVi® and MTX Medium voltage drives ranging from300 to 20,000 HP
» T300MVi® and MTX 2400 V, 4160 V, 6600 V, 13.8 kV and REGEN
» Sync-XFER®/capture (multiple motors synchronized transfer andcapture)
» Dual-frequency 50/60 Hz
» Enclosure NEMA Type 1 and 3R
» 24/36 pulse harmonic cancellation complies with IEEE-519
RIG DRIVE (STAND ALONE FULL SIZE)
» Standard 6, 12 and 18 pulse
» Designed for drilling
» Modular configurations for flexible applicationson specific power configurations
» Power and reliability in a small footprint
» Rugged and compact package design for themost demanding rig applications
POWER APPARATUS & COMPONENTS (PAC)
» MV switchgear and control gear
» Medium voltage motor starters:
» Full Voltage Non-Reversing (FVNR)
» Full Voltage Reversing (FVR)
» Reduced Voltage Autotransformer (RVAT)
» Solid State Starter (SSS)
» Components: contactors and relays
TUNDRA INTEGRATED SOLUTIONS
» Sizes up to 1500 HP
» Voltages 230, 460, 575, 690 VAC
» Outdoor installation (NEMA Type 3R, 4, 4X)
» Indoor installation (NEMA Type 1, 3, 12)
» Dual-frequency 50/60 Hz
» Panel solutions:
» Low harmonic panels
» Pump Jack Panels (PJP)
» Screw Pump Panels (PCP)
» Electric Submersible Pump Panels (ESP)
» Buildings
» Skids
DRIVES
Instrumentation & ControlsTundra Process Solutions is one of Western Canada’s largest instrumentation, measurement and control solutions suppliers. Tundra specializes in selecting, sizing and supplying equipment to support all flow, level, tank safety, measurement and analytical requirements. To support Tundra’s valued clients, Tundra offers in-house factory trained service technicians and sales support to assist with any programming, troubleshooting or start-up and commissioning activity.
FLOW
Innovative “V-Cone” & “Wafer Cone” Flow Meters
Multiphase Meters, Slug Detection & Control
Coriolis Mass Flow Meters, Differential Pressure Products, Electromagnetic Flow Meters, Variable Area Flow Meters,
Vortex & Swirl Flow Meters
Thermal Mass Flow Meters Industry Canada Approved Liquid and Gas Flow Computers and Measurement Automation Software
Ultrasonic Flare Meters & Ultrasonic Gas/Liquid Process Meters
Flow Computers and Remote Terminal Units (RTU) for Div. 1 and 2 Applications
MEASUREMENT & ANALYTICAL
Pressure, Temperature, Differential Pressure, pH, ORP, Oxygen
Combustion Gas Analyzers, Process Controllers & Indicators & TotalFlow
Natural Gas Chromatographs
Gas Measurement, Moisture & Humidity Measurement, Pressure,
Test & Calibration Equipment
GAS & FLAME DETECTION
Magnetic Level Gauges, Radar, Magnetostrictive & Laser Level
Transmitters, Thermal Dispersion & Vibrating Fork Point Level Switches,
Differential Pressure & Totalflow LevelMaster.
Pre-Insulated, Heat-traced Tubing Bundles, Winterization
Enclosures & Instrument Stands
Fixed Gas & Flame Detection, Turnkey Integrated PLC based
Monitoring & Control Solutions
Combustible & Toxic Gas Detection, Flame Detection,
Ultrasonic Gas Leak Detection, Control Systems
Combustible & Toxic Gas Detection, Enhanced Laser Diode Spectroscopy (ELDS)
Open-Path Laser-based Detection
Fixed Ultrasonic Gas Leak Detectors For The Oil, Gas and Processing Industries
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves usedin isolation and control applications while providing complete actuation solutions for all types oflinear and quarter turn valves. Their full line of pressure management devices to provide safetyand protect important equipment. Tundra offers a comprehensive selection of steam traps andcertified technicians to perform facility steam audits and steam trap surveys to optimize plantefficiency and reduce unexpected maintenance.
ISOLATION
General Purpose Control Valves
Triple Offset Metal Seated Process Butterfly Valves, Dual Disc Check Valves
Municipal Valves for Water Treatment and Distribution
High Performance ON/OFFSoft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Forged Gate, Globe, Dual Plate Check, Check, Ball Valves & Through Conduit Gate Valves
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators & Quick Exhaust Valves
Actuators & Positioners
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
CONTROL ACTUATION
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Electric Actuation Solutions for all Applications
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Severe Service Control Valves & DRAG technology, Choke, Desuperheating, Bypass, Boiler Feedwater
Ball, Cast Steel & Forged Steel Valves
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
High Efficiency Steam Traps, Pump-Traps, & Prefabricated Condensate Drainage Packages
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pipe, V
alves &
Actua
tion
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pipe,
Valv
es &
Act
uatio
n
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actua
tion
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
PRESSURE MANAGEMENT SPECIALTY
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Rupture Discs
Valves & ActuationTundra Process Solutions’ Valves & Actuation Division offers an extensive selection of valves used in isolation and control applications while providing complete actuation solutions for all types of linear and quarter turn valves. Their full line of pressure management devices to provide safety and protect important equipment. Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant efficiency and reduce unexpected maintenance.
Tundra Link.indd 12 3/10/15 8:10 PM
Pip
e, Valves &
Actu
atio
n
Complete Actuation Solutions
Positioning & Position Monitoring Devices Solenoid Valves, Filter Regulators& Quick Exhaust Valves
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage Packages
Fibreglass Pipe Solutions
» Global Leader in production and engineering ofhigh-pressure Fibreglass Pipe Systems
» Superior durability and corrosion resistance in highpressure and high temperature environments
» Customized design solutions to meet standard or uniquespecifications
» Elevated standards of performance and service life
VALVES & ACTUATION
PIPE
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 10 3/10/15 8:16 PM
Severe Service Control Valves , Choke & Desuperheater Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
General Purpose Control Valves
Actuators & Positioners
Triple Offset Metal Seated Process Butterfly Valves, Dual Plate Check Valves
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF Soft & Metal Seated
Pressure Regulators, Dump & Control Valves, Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Electric Actuation Solutions for all Applications
Positioning & Position Monitoring Devices
Solenoid Valves, Filter Regulators& Quick Exhaust Valves
Rotary Control, Cageball
Triple Offset Metal Seated Process Butterfly Valves
ISOLATION CONTROL ACTUATION
Pneumatic, Hydraulic & Electro-Hydraulic Actuators & Control Systems
Pipe, Valves & ActuationTundra Process Solutions’ Pipe, Valves & Actuation Division offers an extensive selection of control, gate, globe and check valves. High performance severe service valves ensure operation and reliability in the harshest of services. In addition to valves, Tundra offers a comprehensive selection of steam traps and certified technicians to perform facility steam audits and steam trap surveys to optimize plant effi iency and reduce unexpected maintenance. Tundra also proudly represents a full line of fibreglass pipe from Hanwei Energy.
Pip
e, V
alv
es &
Act
uation
VALVES & ACTUATION
Severe Service Control Valves& Desuperheater Valves
Resilient Seated& Butterfly Valves
Forged Gate, Globe, Dual Plate Check, Check,Ball Valves & Through Conduit Gate Valves
Rupture Discs
General Purpose Control Valves Safety Valves
Actuators & Positioners
Triple Offset Metal Seated ProcessButterfly Valves, Dual Disc Check Valves
Pressure Vacuum Relief Valves& Flame Arrestors
Ball, Gate, Globe, Check, Needle& Butterfly Valves
High Performance ON/OFF& Control Ball Valves
CSA/CGA Valves for Gas &Liquid Shutoff, API Approved
Pressure Regulators, Dump & Control Valves,Liquid Level Controller & Switches
Industrial Valves &Automation Solutions
Cast Steel & Pressure Seal Gate, Globe & Check valves
Tundra Link.indd 12 3/10/15 8:10 PM
Valves &
Actu
atio
n
Tundra Link.indd 13 3/10/15 8:10 PMV5920 Tundra Line Card.indd 11 3/10/15 8:16 PM
High Efficiency Steam Traps, Pump-Traps, &Prefabricated Condensate Drainage PackagesSafety Valves
Rupture Discs
Pressure Vacuum Relief Valves & Flame Arrestors
CSA/CGA Valves for Gas & Liquid Shutoff, API Approved
Silencers, Resistors & Pulsation Dampeners
SPECIALTYPRESSURE MANAGEMENT
Silencers, Resistors & Pulsation Dampeners
Pressure Vacuum Relief Valves& Flame Arrestors
Process, Steam & Specialty Relief ValvesPressure Relief System, Design & Audit
Panels & BuildingsTundra Process Solutions provides custom engineered solutions including prefabricated panels, buildings and equipment.
In-house designers work with clients to design custom equipment to meet any specification. High quality and robust indoor/outdoor designs ensure long-life and product performance.
CUSTOM PANEL SOLUTIONS
» Available voltages 230, 460, 575, 690 VAC
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Low harmonic option available
» Custom panel sizes to suit any installationrequirement
» Available as a standalone unit or a completeintegrated package
RTU PANEL
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Custom panel sizes to suit any installationrequirement
» Available as a standalone unit or a completesystem package
» Flow computer, well-optimization and remotemonitoring integration
» Certified to CAN/CSA STD C22.2 for use inClass-1, Division-2 hazardous locations
ELECTRIC SUBMERSIBLE PUMP (ESP)
» Available voltages 230, 460, 575, 690 VAC
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Compact design for reduced spacerequirements
» Reduces operating costs
» Reduces downtime
» Ability to start an ESP while motor is spinning
» Sequence-start for use on wells withstuck pumps
» Soft-start function
» Load-side, phase-to-phase, short-circuitprotection
» Sine wave output fi ter standard
» Low harmonic option available
ESP Options
» Prepackaged pad systems
» Indoor self-contained building
» Outdoor open grate skid mount
LOW HARMONIC
» Available voltages 230, 460, 575, 690 VAC
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Limits total current harmonic distortion to 8%TDD (<6% typical at full load)
» The LH Series ASD meets current distortionlimits outlined in IEEE Std 519-1992 “IEEERecommended Practices and Requirements forHarmonic Control in Electrical Power Systems”based on an ISC/IL level of 20+
» Lower fi ter cost when compared with12 & 18-pulse designs
» Decreased sensitivity to voltage imbalance whencompared to 12 & 18-pulse designs
» Decreased sensitivity to line disturbances vs.Active Front End (AFE) drive-based filters
» Uninterrupted operation; the ASD will continue tooperate in the event of a filter shutdown
CHEMICAL INJECTION MANAGEMENT
» Custom tank and pump packages available to meetyour applications and provide injection perfection
» Allows for automatically adjusted injection ratesthrough SCADA
» Allows for excess chemical to be recycled back to tankto keep multi-component chemicals from separating
» Expanded low end pump range down to 0.5 litres/daywith continuous injection
TRUCKED LIQUID MEASUREMENT
» Monitoring of single well battery production
» Accurate daily accounting of received fluids with simpleintegration of data to production accounting programs
» Directive 17, Section 10 compliant metering packages
» API 11.1 (2004) and API 2540 compliant net oilcalculations
» Identification of products not satisfying the qualitycontrol requirements
COMMUNICATION, CONTROLS & MARSHALLING PANELS
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Custom panel sizes to suit any installationrequirement
» Available as a standalone unit or a completesystem package
SCREW PUMP (PCP) & PUMP JACK (PJP)
» Available voltages 230, 460, 575, 690 VAC
» Compact design for reduced space requirements
» Extend driven equipment life
» Outdoor installations (NEMA Type 3R, 4, 4X)
» Indoor installations (NEMA Type 1, 3, 12)
» Increases pump efficiency
» Dynamic braking resistor as a standard
» Reduce operating costs
» Maximize total output
» Low harmonic option available
VFD/ELECTRICAL BUILDINGS
» Tundra offers a full range of buildings, options andaccessories for a variety of applications
» Packages include integration of Toshiba drives, HVAC andelectrical requirements
» Minimize customer resource requirements:
» Take advantage of Tundra’s procurement, designand construction services
» A single package warranty to manage
» One point of contact for support
SSi Artificial Lift Intelligent Rod Pumping SystemTundra Process Solutions manufactures and distributes the SSi Artificial Lift Intelligent Rod Pumping System. Tundra’s patented technology is used to increase efficiency, uptime and production.
The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic intelligent monitoring to improve well production. The system offers a much lower total cost of installation when compared to other forms of artificial lift.
Tundra Link.indd 16 3/10/15 8:10 PM
Artifi
cial Lift
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
250-15-240 2.2 15 25,000 lbs 240"
250-25-240 2.8 25 25,000 lbs 240"
250-40-240 4.4 40 25,000 lbs 240"
250-60-240 5.3 60 25,000 lbs 240"
250-75-240 6.0 75 25,000 lbs 240"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
400-40-288 1.7 40 40,000 lbs 288"
400-60-288 2.0 60 40,000 lbs 288"
400-75-288 3.4 75 40,000 lbs 288"
400-100-288 3.7 100 40,000 lbs 288"
400-125-288 5.1 125 40,000 lbs 288"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
600-60-336 1.7 60 60,000 lbs 336"
600-75-336 2.0 75 60,000 lbs 336"
600-100-336 2.3 100 60,000 lbs 336"
600-125-336 3.2 125 60,000 lbs 336"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
800-100-360 2.1 100 80,000 lbs 360"
800-125-360 2.8 125 80,000 lbs 360"
800-150-360 3.0 150 80,000 lbs 360"
MODEL 250
MODEL 400
MODEL 600
MODEL 800
SURE STROKE INTELLIGENT TM LIFT SYSTEMIncrease effi iency, uptime and production. Try an SSi™ Lift System today.
*Higher speeds may be available, please consult factory
Tundra Link.indd 17 3/10/15 8:10 PMV5920 Tundra Line Card.indd 14 3/10/15 8:16 PM
SSi Artificial Lift Intelligent Rod Pumping SystemSSi Artificial Lift Intelligent Rod Pumping System Patented & Patent Pending
Lowest Total Cost of Ownership.
Planned Preventative Maintenance
- Rapid response to customer support requirements by SSi’s team of experienced technicians
- PM conducted every 180 days
Well Design
Unit Selection for Well Optimization
- Design collaboration- Final selection of model
- Model 250- Model 400- Model 600- Model 800
- Final selection of HP- 15, 25, 40, 60, 75,
100, 125, or 150 HP
Transportation & Installation
Operation & Production
- Improved safety and environmental impact - Inherently safe design with no large rotating counterweight and quieter operation
- Fewer well interventions due to reduced tubing and sucker rod wear and BHP failure- 90% downhole pump efficiency or greate - Stroke lengths up to 360 inches
- Lift capacity up to 80,000 lbs- Small footprint and well spacing - 15 foot for Model 250 & 400 - 20 foot for Model 600 & 800
- Systems can be installed and running within 4 hours- Requires only 1 truck with picker for installation- Modular 2-component design (pump & power unit)- Certified factory trained service and installation an
on-site comprehensive operator training available
- Ease of workover (15 minutes or less)
- PLC controlled monitoring of all functions & alarms
- Integrated dual-stage pump off controller
- Well optimization in minutes with PLC producedsurface dynacard
- Lower per-barrel cost
- Run times greater than 99%
- High turndown ratio for high decline wells
- 30-70% energy efficienc
- Autostroke PLC logic - Patent Pending
HSE
Art
ifici
al L
ift
Artificial LiftTundra Process Solutions manufactures and distributes the Sure Stroke Intelligent ™ (SSi™) Lift System. Tundra’s patented technology is used to increase effi iency, uptime and production.
The SSi™ Lift System uses state-of-the-art electronics, variable frequency drive (VFD) control, hydraulics and intelligent monitoring to improve production from both deep and shallow wells.
Long Slow Stroke
» Fewer well interventions as a result of reduced tubing and sucker rod wear
» Clients have reported better than 90% downhole pump efficiency dueto the long slow stroke and soft rod turnaround
» More efficient than conventional pumping units by up to 30%
» Stroke lengths up to 360 inches are available
» High lift capacities to 80,000 lbs peak polish rod load
» High turndown ratio for today’s high decline wells
» Inherently safe design with no large rotating counterweight
Intelligent
» Autostroke PLC logic
» PLC controlled monitoring of all SSi™ Lift System functions and alarms
» Local touch screen for instantaneous changes to pumping speed andstroke length
» Integrated dual-stage pump off controller
» SCADA ready via proven web-based remote monitoring system
» Remote access from the comfort of your office, truck or home
» Well optimization accomplished in minutes withPLC produced surface dynacard
» Ability to supply the SSi™ Lift System and downhole recommendations using predictive design software
Service and Installation
» SSi™ Lift Systems can be installed and running within 4 hours,requiring only one truck with picker for installation
» Modular 2-component design (pump and power unit)
» Certified factory trained service and installation technicians
» On-site comprehensive operator training is available
» Operating temperatures from -45 to 65°C (-49 to 149°F)
» Rapid response to customer support requirements by Tundra’s team of experienced technicians
» Aesthetically pleasing and whisper quiet during operation
» Chemical injection equipment and integrationoptions available
Purchasing Options
» Outright purchase of the SSi™ Lift System
» Leasing options available(a portion of lease payments can be applied to purchase price)
» SAGD and conventional options are available
» Sold and serviced internationally
BENEFITS OF THESURE STROKE INTELLIGENT TM LIFT SYSTEMSSi™ Lift System Patent Pending
Tundra Link.indd 16 3/10/15 8:10 PM
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
250-15-240 2.2 15 25,000 lbs 240"
250-25-240 2.8 25 25,000 lbs 240"
250-40-240 4.4 40 25,000 lbs 240"
250-60-240 5.3 60 25,000 lbs 240"
250-75-240 6.0 75 25,000 lbs 240"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
400-40-288 1.7 40 40,000 lbs 288"
400-60-288 2.0 60 40,000 lbs 288"
400-75-288 3.4 75 40,000 lbs 288"
400-100-288 3.7 100 40,000 lbs 288"
400-125-288 5.1 125 40,000 lbs 288"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
600-60-336 1.7 60 60,000 lbs 336"
600-75-336 2.0 75 60,000 lbs 336"
600-100-336 2.3 100 60,000 lbs 336"
600-125-336 3.2 125 60,000 lbs 336"
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
800-100-360 2.1 100 80,000 lbs 360"
800-125-360 2.8 125 80,000 lbs 360"
800-150-360 3.0 150 80,000 lbs 360"
MODEL 250
MODEL 400
MODEL 600
MODEL 800
SSi ARTIFICIAL LIFT INTELLIGENT ROD PUMPING SYSTEMEase of Trackback in minutes. Not wellhead mounted. No crane required.
Tundra Link.indd 17 3/10/15 8:10 PMV5920 Tundra Line Card.indd 15 3/10/15 8:16 PM
SSi Artificial Lift Intelligent Rod Pumping SystemTundra Process Solutions manufactures and distributes the SSi Artificial Lift Intelligent Rod Pumping System. Tundra’s patented technology is used to increase efficiency, uptime and production.
The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic intelligent monitoring to improve well production. The system offers a much lower total cost of installation when compared to other forms of artificial lift.
SURE STROKE INTELLIGENT TM LIFT SYSTEMIncrease efficiency, uptime and production. Try an SSi™ Lift System today.
*Higher speeds may be available, please consult factory
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
250-15-240 2.2 15 25,000 lbs 240”
250-25-240 2.8 25 25,000 lbs 240”
250-40-240 4.4 40 25,000 lbs 240”
250-60-240 5.3 60 25,000 lbs 240”
250-75-240 6.0 75 25,000 lbs 240”
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
350-150-372 7.0 150 35,000 lbs 372”
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
400-40-288 1.7 40 40,000 lbs 336”
400-60-288 2.0 60 40,000 lbs 336”
400-75-288 3.4 75 40,000 lbs 336”
400-100-288 3.7 100 40,000 lbs 336”
400-125-288 5.1 125 40,000 lbs 336”
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
600-60-336 1.7 60 60,000 lbs 336”
600-75-336 2.0 75 60,000 lbs 336”
600-100-336 2.3 100 60,000 lbs 336”
600-125-336 3.2 125 60,000 lbs 336”
MODEL 250
MODEL 350
MODEL 400 LS
MODEL 600
MODEL 800 Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
800-100-360 2.1 100 80,000 lbs 360”
800-125-360 2.8 125 80,000 lbs 360”
800-150-360 3.0 150 80,000 lbs 360”
Maintenance & SupportTundra’s Reliability, Maintenance & Support team can solve the most challenging maintenance and reliability issues. Tundra offers factory trained technicians that are available 24/7 to assist with start-up, commissioning, preventative maintenance programs and repairs. Tundra holds a Certificate of Recognition (COR), and believes in safety as a core value.
Tundra will also work alongside facility and equipment owners to develop scheduled maintenance plans – mitigating unexpected shutdowns and stoppages. Tundra’s Reliability Specialists combine efficient work processes with hands-on skills that generate immediate and measureable results, and work to develop and improve existing asset management programs and plans.
Tundra’s Service Department provides:
» Certified factory trained technicians available on-call 24/7
» On-site service capabilities for industrial and commercial customers
» Remote troubleshooting and tech support
» Same-day response
» Emergency shipments available 24/7
» Long-term and short-term maintenance agreements
» Over $5,000,000 in stocked parts inventory
» Computerized inventory link system with over 6,000 additional parts ready for shipment
Reliability-Services offered
» Tundra’s team is committed to help with asset intensive industries to deliver sustainable equipment performance.
» Reliability Centred Maintenance (RCM)
» Failure Mode Effects Analysis (FMEA)
» Preventative Maintenance (PM)
» Root Cause Analysis (RCA)
» Reliability Engineering (RE)
Tundra’s Service Department is certified in:
» H2S Alive
» Transportation of Dangerous Goods (TDG)
» Workplace Hazardous Materials Information System (WHMIS)
» Lockout/Tag-out
» Fall Protection
» First Aid
» Petroleum Safety Training (PST)
» Construction Safety Training Systems (CSTS)
» Confined Space and Rescue
» ARC Flash
» Wildlife Awareness
Tundra subscribes to:
» ComplyWorks
» ISNetworld
» Avetta (formerly PICS)
THE TUNDRA GUARANTEETundra offers a 100% satisfaction guarantee on all products, parts and services.
The Tundra Guarantee Tundra offers a 100% satisfaction guarantee
on all products, parts and services.
www.TundraSolutions.ca | Toll-Free: 1-800-265-1166
Head Office: Phone: (403) 255 - 5222 | Fax: (403) 253 - 4448 | 3200 - 118 Ave SE, Calgary, AB T2Z 3X1 | [email protected] Regional Offices: Edmonton, Fort McMurray, Grande Prairie, Red Deer, Saskatoon, Swift CurrentRegional Office USA: Colorado, Oklahoma, Texas© 2018 Tundra Process Solutions Ltd. Printed in Canada TPS-LC/B-032018