solution pt activity 7.6.1

8/12/2019 Solution PT Activity 7.6.1

1/17

Solution PT Activity 7.6.1: Packet Tracer Skills

Integration Challenge

Task 1: Configure and Verify asic !evice Configurations

Ste" 1. Configure #asic co$$ands.

Configure each switch with the following basic commands. Packet Tracer only grades the hostnames and default

gateways.Hostnames

BannerEnable secret password

Line configurations

Serice encryptionSwitch default gateways

S1Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switchconfig!#hostname S"

S"config!#anner motd #$elcome %uthori&ed 'sers 'nauthori&ed access prohiited(#

S"config!#enale secret classS"config!#line )t* +

S"config-line!#password cisco

S"config-line!#login

S"config-line!#eit

S"config!#ser)ice password-encr*ption

S"config!#ip default-gatewa* "0.".11."

S"config!#

S%Switch>en


2/17

Switch#conf t


Switchconfig!#hostname S0

S0config!#anner motd #$elcome %uthori&ed 'sers 'nauthori&ed access prohiited(#

S0config!#enale secret class

S0config!#line )t* +

S0config-line!#password cisco

S0config-line!#login

S0config-line!#eit

S0config!#ser)ice password-encr*ption

S0config!#ip default-gatewa* "0.".11."

S0config!#

S&Switch>en

Switch#conf t


Switchconfig!#hostname S2

S2config!#anner motd #$elcome %uthori&ed 'sers 'nauthori&ed access prohiited(#

S2config!#enale secret class

S2config!#line )t* +

S2config-line!#password cisco

S2config-line!#loginS2config-line!#eit

S2config!#ser)ice password-encr*ption

S2config!#ip default-gatewa* "0.".11."

S2config!#

Ste" %. Configure the $anage$ent V'A( interface on S1) S%) and S&.

Create and enable interface !L"# $$ on each switch. %se the addressing table for address configuration.

S1S"config!#int )lan 11

S"config-if!#ip address "0.".11.2" 033.033.033.+

S"config-if!#eit

S"config!#

S%S0config!#int )lan 11

S0config-if!#ip address "0.".11.20 033.033.033.+

S0config-if!#eit

S0config!#

S&S2config!#int )lan 11

S2config-if!#ip address "0.".11.22 033.033.033.+

S2config-if!#eit

S2config!#

Ste" &. Check results.

&our completion percentage should be '(). *f not+ click Check ,esults to see which re-uired components are not yetcompleted.

Task %: Configure VTP

Ste" 1. Configure the VTP $ode on all three s*itches.

Configure S' as the serer. Configure S and S( as clients.

S1S"config!#)tp mode ser)er


3/17

Setting de)ice to 4T5 SE64E6 mode.

S"config!#

S%S0config!#)tp mode client

Setting de)ice to 4T5 CL7ENT mode.

S0config!#

S&S2config!#)tp mode client

Setting de)ice to 4T5 CL7ENT mode.

S2config!#

Ste" %. Configure the VTP do$ain na$e on all three s*itches.

%se CC#" as the !TP domain name.

S1S"config!#)tp domain CCN%

Changing 4T5 domain name from N'LL to CCN%

S"config!#

S%S0config!#)tp domain CCN%


S0config!#

S&S2config!#)tp domain CCN%


S2config!#

Ste" &. Configure the VTP do$ain "ass*ord on all three s*itches.

%se cisco as the !TP domain password.

S1S"config!#)tp password cisco

Setting de)ice 4L%N dataase password to cisco

S"config!#

S%S0config!#)tp password cisco


S0config!#

S&S2config!#)tp password cisco


S2config!#

Ste" +. Check results.

&our completion percentage should be '). *f not+ click Check ,esults to see which re-uired components are not yet

completed.

Task &: Configure Trunking

Ste" 1. Configure trunking on S1) S%) and S&.

Configure the appropriate interfaces as trunks and assign !L"# $$ as the natie !L"#.


4/17

S1S"config!#interface range f+/" - f+/3

S"config-if-range!#switchport mode trun8

S"config-if-range!#switchport trun8 nati)e )lan 11

S"config-if-range!#no sh

S"config-if-range!#eit

S%S0config!#interface range f+/" - f+/

S0config-if-range!#switchport mode trun8

S0config-if-range!#switchport trun8 nati)e )lan 11

S0config-if-range!#no sh

S0config-if-range!#eit

S0config!#

S&S2config!#interface range f+/" - f+/

S2config-if-range!#switchport mode trun8

S2config-if-range!#switchport trun8 nati)e )lan 11

S2config-if-range!#no sh

S2config-if-range!#eit

S2config!#

Ste" %. Check results.

&our completion percentage should be //). *f not+ click Check ,esults to see which re-uired components are not yetcompleted.

Task +: Configure V'A(s

Ste" 1. Create the V'A(s on S1.

Create and name the following !L"#s on S' only. !TP adertises the new !L"#s to S and S(.

!L"# '0 1aculty2Staff

!L"# 0 Students!L"# 33 4ireless56uest7

!L"# $$ 8anagement9:efault

S1S"config!#)lan "+

S"config-)lan!#name 9acult*/Staff

S"config-)lan!#eit

S"config!#)lan 0+

S"config-)lan!#name Students

S"config-)lan!#eit

S"config!#)lan ::

S"config-)lan!#name $ireless;uest!

S"config-)lan!#eit

S"config!#)lan 11

S"config-)lan!#name


5/17

4L%N Name Status 5orts

---- -------------------------------- --------- -------------------------------

" default acti)e 9a+/3, 9a+/?, 9a+/, 9a+/:

9a+/1, 9a+/"+, 9a+/"", 9a+/"0

9a+/"2, 9a+/", 9a+/"3, 9a+/"?

9a+/", 9a+/":, 9a+/"1, 9a+/0+

9a+/0", 9a+/00, 9a+/02, 9a+/0

;ig"/", ;ig"/0

"+ 9acult*/Staff acti)e

0+ Students acti)e

:: $ireless;uest! acti)e

11


6/17

S&S2config!#int fa +/

S2config-if!#switchport mode access

S2config-if!#switchport access )lan ::

S2config-if!#eit

S2config!#

Ste" %. Verify V'A( I$"le$entation.%se the appropriate commands to erify your !L"# implementation.

S0#sh )lan

4L%N Name Status 5orts

---- -------------------------------- --------- -------------------------------

" default acti)e 9a+/3, 9a+/?, 9a+/:, 9a+/1

9a+/"+, 9a+/"0, 9a+/"2, 9a+/"

9a+/"3, 9a+/"?, 9a+/", 9a+/"1

9a+/0+, 9a+/0", 9a+/00, 9a+/02

9a+/0, ;ig"/", ;ig"/0

"+ 9acult*/Staff acti)e 9a+/""

0+ Students acti)e 9a+/":

:: $ireless;uest! acti)e 9a+/11


7/17

S"#sh spanning-tree

4L%N+++"

Spanning tree enaled protocol ieee

6oot 7 5riorit* +1

%ddress +++.+@?+.2@

This ridge is the root

Aello Time 0 sec


8/17

4L%N++::

Spanning tree enaled protocol ieee

6oot 7 5riorit* ":

%ddress +++.+@?+.2@

This ridge is the root

Aello Time 0 sec


9/17

6"config-suif!#encapsulation dot"B ::

6"config-suif!#ip address "0.".::." 033.033.033.+

6"config-suif!#eit

6"config!#interface fa+/".11

6"config-suif!#encapsulation dot"B 11 nati)e

6"config-suif!#ip address "0.".11." 033.033.033.+

6"config-suif!#eit

Ste" %. Check results.

&our completion percentage should be >$). *f not+ click Check ,esults to see which re-uired components are not yetcompleted.

Task /: Configure 0ireless Connectivity

Ste" 1. Configure IP Addressing for 0-S% and 0-S&.

Configure L"# settings and then static addressing on the *nternet interfaces for both 4,S and 4,S( using theaddresses from the topology.

#ote< " bug in Packet Tracer may preent you from assigning the static *P address first. " workaround for this issue is to

configure the L"# settings first under #etwork Setup. Sae the settings. Then configure the static *P information under*nternet Connection Type and sae settings again.


10/17

Ste" %. Configure *ireless net*ork settings.

The SS*:s for the routers are 4,S?L"# and 4,S(?L"#+ respectiely.

The 4EP for both is '(/;"BC:E.


11/17


12/17


13/17


14/17

Ste" &. Configure the *ireless routers for re$ote access.Configure the administration password as cisco'(.

Enable remote management.


15/17

Ste" +. Configure PC& and PC+ to access the net*ork using !CP.

PC( connects to the 4,S?L"#+ and PC/ connects to the 4,S(?L"#.


16/17


17/17

This post is also aailable in< *talian

Tags< CC#"+CC#" E@ploration (+cisco+default route+:HCP+packet tracer+pt actiity >.=.'+router on a stick+stp+

trunking+lan+tp
http://www.hangelot.eu/?p=480http://www.hangelot.eu/?tag=ccna-en&lang=enhttp://www.hangelot.eu/?tag=ccna-en&lang=enhttp://www.hangelot.eu/?tag=ccna-exploration-3-en&lang=enhttp://www.hangelot.eu/?tag=ccna-exploration-3-en&lang=enhttp://www.hangelot.eu/?tag=ccna-exploration-3-en&lang=enhttp://www.hangelot.eu/?tag=cisco-en&lang=enhttp://www.hangelot.eu/?tag=cisco-en&lang=enhttp://www.hangelot.eu/?tag=default-route-en&lang=enhttp://www.hangelot.eu/?tag=default-route-en&lang=enhttp://www.hangelot.eu/?tag=dhcp-en&lang=enhttp://www.hangelot.eu/?tag=packet-tracer-en&lang=enhttp://www.hangelot.eu/?tag=packet-tracer-en&lang=enhttp://www.hangelot.eu/?tag=packet-tracer-en&lang=enhttp://www.hangelot.eu/?tag=pt-activity-7-6-1-en&lang=enhttp://www.hangelot.eu/?tag=pt-activity-7-6-1-en&lang=enhttp://www.hangelot.eu/?tag=pt-activity-7-6-1-en&lang=enhttp://www.hangelot.eu/?tag=router-on-a-stick-en&lang=enhttp://www.hangelot.eu/?tag=router-on-a-stick-en&lang=enhttp://www.hangelot.eu/?tag=router-on-a-stick-en&lang=enhttp://www.hangelot.eu/?tag=stp-en&lang=enhttp://www.hangelot.eu/?tag=stp-en&lang=enhttp://www.hangelot.eu/?tag=trunking-en&lang=enhttp://www.hangelot.eu/?tag=trunking-en&lang=enhttp://www.hangelot.eu/?tag=vlan-en&lang=enhttp://www.hangelot.eu/?tag=vlan-en&lang=enhttp://www.hangelot.eu/?tag=vlan-en&lang=enhttp://www.hangelot.eu/?tag=vtp-en&lang=enhttp://www.hangelot.eu/?tag=vtp-en&lang=enhttp://www.hangelot.eu/?tag=vtp-en&lang=enhttp://www.hangelot.eu/?tag=ccna-en&lang=enhttp://www.hangelot.eu/?tag=ccna-exploration-3-en&lang=enhttp://www.hangelot.eu/?tag=cisco-en&lang=enhttp://www.hangelot.eu/?tag=default-route-en&lang=enhttp://www.hangelot.eu/?tag=dhcp-en&lang=enhttp://www.hangelot.eu/?tag=packet-tracer-en&lang=enhttp://www.hangelot.eu/?tag=pt-activity-7-6-1-en&lang=enhttp://www.hangelot.eu/?tag=router-on-a-stick-en&lang=enhttp://www.hangelot.eu/?tag=stp-en&lang=enhttp://www.hangelot.eu/?tag=trunking-en&lang=enhttp://www.hangelot.eu/?tag=vlan-en&lang=enhttp://www.hangelot.eu/?tag=vtp-en&lang=enhttp://www.hangelot.eu/?p=480

solution pt activity 7.6.1

Documents