Customer Testimonials: SoluPrep™

590 E. 32nd St. Holland, MI 494233 616-582-5225 www.designscientific.com

“We use the SoluPrep to prepare specific solution concentrations. This is polymer/toluene (wt/wt) solutions.

SoluPrep does all of the work, reduces exposure to chemicals and, for the most part, does it the same all the time. It takes operator variation out of the equation.”

- Specialty Chemicals Company, US

“We use the Soluprep every day, 7 days a week. We make up from 40 to 100 samples a day with it. We use the SoluPrep to dispense Formic acid for the dissolution of Nylon samples.

After the Nylon is dissolved in Formic acid we run Relative Viscosity testing with the samples. The correct concentration of Formic to Nylon is very critical for obtaining accurate and consistent Relative Viscosity results.

Ever since I started working in the lab, (more than 20 years ago), we have used some version of the Soluprep. It is very reliable, we have very few problems with it. When the gears in the pumps get worn then I have to go in and rebuild them, but that is to be expected.

I know no system is perfect and the other type systems that use a burette and Teflon piston probably would experience a lot of wear because we do so many samples per day, 40-100. I also assume the Soluprep is faster than a burette and piston type system.”

“The SoluPrep system has lessened the variability between our technicians and has also reduced the variability of the instruments that we use.

We once identified a host of issues caused by the techniques of various technicians; this system has cured all of those issues.”

- Global Producer of Polymers and Fibers

- Specialty Chemicals

Company, US