solarspan®

Leaders in Thermal & Architectural Building Solutions

Technical Drawings v2 - Current 20/08/2018

2 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Contents

Panel Detail - SOL13-PR01-1.............................................................. 3

Barge Capping Detail - SOL13-BC01-1 ............................................... 4

Barge/Parapet Detail - SOL13-BC02-1 ................................................ 5

Head Flashing Detail - SOL13-HF01-2 ................................................ 6

Ridge Detail - SOL13-RD03-3 ............................................................. 7

Insulated Box Gutter Detail - SOL13-RD05-1 ...................................... 8

Roof Expansion Joint - SOL13-RJ01-3 ................................................ 9

Insulated Valley Box Gutter - SOL13-RV01-1 ..................................... 10

Eaves Gutter Detail ‘1’ - SOL13-WC03-2 ........................................... 11

Eaves Gutter Detail ‘2’ - SOL13-WC04-2 ........................................... 12

3

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Panel Detail - SOL13-PR01-1

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSPR01

PANEL DETAIL

1

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

4 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Barge Capping Detail - SOL13-BC01-1

ANGLE BRACKETTO FIX WALL PANEL

COLORBOND CAPPINGFIXED TO WALL PANEL

INSULATEDSOLARSPAN ROOF

CLEAT &STRUCTURALSTEEL

PURLINS

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER ENGINEER FORASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSBC01

BARGE CAPPING DETAIL

IND.ROOFING & CLADDING 1

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

5

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Barge/Parapet Detail - SOL13-BC02-1

14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER TO ENGINEERFOR ASSESSMENT.

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSBC02

BARGE / PARAPET DETAIL

IND.ROOFING & CLADDING 1

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

6 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Head Flashing Detail - SOL13-HF01-2

PROFILED FILLERSEALED TOP AND

BOTTOM IF REQUIRED

TURN UP ROOF PANSTO FULL RIB HEIGHT

(SPECIAL TOOLAVAILABLE)

FOAM SEAL IFREQUIRED

ROOF HEAD FLASHING

PROFILED FILLERSEALED TOP AND

BOTTOM IF REQUIRED

2° MINIMUM PITCH.

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAYBE REQUIRED, REFERENGINEER FOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSHF01

HEAD FLASHING DETAIL

IND.ROOFING & CLADDING 2

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

7

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Ridge Detail - SOL13-RD03-3

2° MINIMUM PITCH.

COLORBOND RIDGECAPPING

TURN UP PANS TO FULLRIB HEIGHT

14g TEK SCREWS TOEVERY RIB. ADDITIONAL

FIXINGS MAY BEREQUIRED, REFER

ENGINEER FORASSESSMENT

ROOF SUPPORTSTRUCTURE.

SOLARSPANROOF

CYCLONE WASHER (OPTION FORCYCLONIC REGIONS)

COLORBONDCOVERFLASHING

MINERAL WOOLOR FIBRE INFILL

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSRD03

RIDGE DETAIL

IND.ROOFING & CLADDING 3

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

8 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Insulated Box Gutter Detail - SOL13-RD05-1

2° MINIMUM PITCH.

BOX GUTTER(INDEPENDENTLYSUPPORTED)

OVERFLOWSPITTERS / SPIGOT

6x4mm BUTYLRUBBER

COLORBOND "Z"FLASHING

14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE

REQUIRED, REFER ENGINEERFOR ASSESSMENT

INSULATED SOLARSPANROOF ROOF PANEL "CUTBACKS" CARRIED OUTON SITE.

50mm INSULATEDPANEL

CONCRETE PARAPETWALL

PARAPET AND COVERFLASHINGS

ROOF SUPPORTSTRUCTURE

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSRD05

INSULATED BOX GUTTER DETAIL

IND.ROOFING & CLADDING 1

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

9

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Roof Expansion Joint - SOL13-RJ01-3

INSULATEDSOLARSPANROOF

TURN UP PAN TO FULL RIBHEIGHT (SPECIAL TOOLAVAILABLE)

TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)

COLORBONDFLASHING

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE

REQUIRED, REFER ENGINEERFOR ASSESSMENT

2° MINIMUM PITCH.

ROOF SUPPORTSTRUCTURE

MINERAL WOOL INFILL(IF REQUIRED) COLORBOND TRIM

FLASHING (IF REQUIRED)14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BEREQUIRED, REFER ENGINEERFOR ASSESSMENT

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSRJ01

ROOF EXPANSION JOINT

COMMERCIAL / DOMESTIC ROOFING 3

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

10 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Insulated Valley Box Gutter - SOL13-RV01-1

BOX GUTTER DIMENSIONS AS REQUIRED

BOX GUTTER SUPPORT

TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)

ROOF SUPPORTSTRUCTURE

14g TEK SCREWS TO EVERY RIB.ADDITIONAL FIXINGS MAY BE REQUIRED,

REFER ENGINEER FOR ASSESSMENT

SILICONE SEALANTEACH SIDE

2° MINIMUM PITCH.2° MINIMUM PITCH.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSRV01

INSULATED VALLEY BOXED GUTTER

COMMERCIAL / DOMESTIC ROOFING 1

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

11

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Eaves Gutter Detail ‘1’ - SOL13-WC03-2

"Z" FLASHING TO SEALCORE IF REQUIRED.

FASTEN GUTTER BRACKETTHROUGH PANEL WITH BOLT

WASHER AND NUT ASSEMBLY

EAVES GUTTER

ROOF PANEL CUT BACKS CARRIED OUT ON SITE.

SOLARSPANINSULATED ROOF

2° MINIMUM PITCH.

ROOF SUPPORTSTRUCTURE

14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAY

BE REQUIRED, REFERENGINEER FOR ASSESSMENT.

4mmALUMINIUMRIVETS@300CRS(TYP)

TURN DOWN PANAPPROX 20° (SPECIAL

TOOL AVAILABLE)

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSWC03

EAVES GUTTER DETAIL 1

IND. ROOFING & CLADDING 2

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

12 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

Eaves Gutter Detail ‘2’ - SOL13-WC04-2

"Z" FLASHING TO SEALCORE IF REQUIRED

SOLARSPANINSULATED ROOF

14g TEK SCREWS TO EVERYRIB. ADDITIONAL FIXINGS MAY

BE REQUIRED, REFERENGINEER FOR ASSESSMENT.

2° MINIMUM PITCH.

ROOF SUPPORTSTRUCTURE

4mm ALUMINIUMRIVETS @300CRS (TYP)

EAVES GUTTER

ROOF PANEL CUT BACKS CARRIED OUT ON SITE.

TURN DOWN PANAPPROX 20° (SPECIAL

TOOL AVAILABLE)

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

SOL13-

Description

Title

06.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

SOLARSPAN - ROOFING

NTSWC04

EAVES GUTTER DETAIL 2

IND. ROOFING & CLADDING 2

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

13

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

14 SolarSpan® - Technical Drawings v2 - Current 20/08/2018

Standard Constructionsolarspan®

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

15

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

SolarSpan® - Technical Drawings v1 - Current 20/08/2018

Standard Constructionsolarspan®

www.bondor.com.au

1300 300 099

BRISBANE/EXPORT 103 Ingram Road Acacia Ridge QLD 4110 Ph: (07) 3323 8500 Fax: (07) 3323 8501

PERTH 17 Gauge Circuit Canning Vale WA 6155 Ph: (08) 9256 0600 Fax: (08) 9256 0620

ADELAIDE 70-72 Rundle Road Salisbury South SA 5106

Ph: (08) 8282 5000 Fax: (08) 8282 5099

MELBOURNE 329A St Albans Road Sunshine VIC 3020 Ph: (03) 8326 8000 Fax: (03) 8326 8099

LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249

Ph: (03) 6335 8500 Fax: (03) 6335 8544

SYDNEY 49-53 Newton Road Wetherill Park NSW 2164

Ph: (02) 9609 0888 Fax: (02) 9729 1114

Leaders in Thermal & Architectural Building Solutions

** Limited availability. ^ Darker colours warranted for use in limited regions. Metecno Pty Limited. ABN 44 096 402 934. The manufacturer reserves the right to change the specification without notice. Bondor®, LuxeWall®, MetecnoInspire®, Equitilt®, BondorPanel®, FlameGuard®, MetecnoPanel®, EconoClad®, MetecnoKasset®, InsulWall®, LuxeWall®, DesignerWall®, SolarSpan®, InsulRoof®, MetecnoSpan®, Purline®, Equideck®, InsulLiving®, EconoClad®, Metecno are trademarks of Metecno Pty Limited. BlueScope, Colorbond®, Permagard® and colour names are trademarks of BlueScope Steel Limited. Microban® is a registered trade mark of the Microban Products Company. The colours shown in this publication have been reproduced to represent actual product colours as accurately as possible. However, given printing limitations, we recommend checking your chosen colour against an actual sample before placing orders. This advice is of a general nature only. Designers must provide for adequate structural performance and other Building Code requirements. This information is subject to change. Refer to Bondor® website for latest version. Consult Bondor® for your application. BON0535 Drawing Pack - SolarSpan v2 20/08/2018