soil & mulch producer news - may/june 2010

NEWS Serving Soil, Mulch, Compost, & Biofuel Professionals

Vol. IV No. 3 May / June 2010

Continued on page 3

M ulch producers — angered over a federal government program that has already seriously impacted their

industry — are anxiously awaiting new guidelines due out later this year for the Farm Service Agency’s Biomass Crop Assistance Program.

While the program’s goal of providing financial subsidies to encourage cultivation of new biomass crops has generally been endorsed by mulch producers, the actual result of BCAP has been to create a crisis in the mulch industry and chaos in the marketplace, according to mulch company officials.

“The intentions were right but it’s gotten dangerously out of hand,” says Steve Liffers, president of Coastal Supply in Dagsboro, Delaware. “They (government officials) have put this industry in jeopardy. Their attitude is if they wipe out this industry, it’s for the greater good.”

“We’ve been put at a real competitive disadvantage,” adds John Leber, general manager of Swanson Bark & Wood Products in Longview, Wash. “Basically, they’re throwing an awful lot of us under the bus.”

The mulch industry, however, doesn’t plan to go down without a fight.

“We’re doing everything we know how to do,” says John Spencer, chief executive officer of Mulch Manufacturing in Reynoldsburg, Ohio.

That includes meetings between mulch company representatives and government and

Irate Mulch Industry Awaits New Rules on Biomass Subsidy Program

By P.J. Heller

elected officials. The Mulch and Soil Council encouraged its members to wage an aggressive letter writing campaign during a government-imposed comment period that ended in early April. A suggested industry letter contends the government subsidy program has not only created shortages of raw materials, but has prompted excessive price increases for those materials. Such an impact, the letter warns, “will force industry-wide closures.”

“Using $2 billion in taxpayer money to redistribute raw materials in existing markets which eliminates environmentally beneficial companies supporting rural development and employment worth hundreds of thousands of jobs with no gain in new biomass resources is a consequence that we believe was not intended by Congress,” the letter states.

The ire of the mulch industry — not to mention composite wood manufacturers and paper, pulp and packaging companies among others — is aimed directly at the Biomass Crop Assistance Program, or BCAP, which was part of the 2008 farm bill. The BCAP provision was designed to provide a subsidy to forest and agriculture land owners for eligible biomass material delivered to a qualified biomass conversion facility. As of April 16, more than $185 million in subsidies had been doled out, according to the U.S. Department of Agriculture.

Attention Readers !

Pho

to c

ourt

esy

of M

ulch

Mfg

., w

ww

.mul

chm

fg.c

om.

Are you looking for Products, Equipment or Services for your business? If so,

please check out these leading companies advertised in this issue:

BaggINg SySteMSHamer LLC - pg 16

Premier tech Chronos - pg 4Rethceif Packaging - pg 6

BuSINeSSeS FoR SaLe

Coldwell Banker Commercial - pg 13

CoLoRaNtS FoR MuLCH

Colorbiotics - pg 15Florida Coastal Colors - pg 12

CoMPoSt & Wood WaSte FoR SaLe

Litco International - pg 16the Pallet Shop - pg 13

CoMPoSt MIxeRS & SPReadeRS

Roto-Mix LLC - pg 14

CoMPoSt tuRNeRS

turn and Screen - pg 11

SHReddeRS, gRINdeRS, CHIPPeRS & SCReeNINg SySteMS

allu group Inc - pg 18duratech - pg 5

earth Saver equipment - pg 11Hogzilla - pg 11Komptech - pg 4

Morbark Inc. - pg 2Peterson - pg 19

ReMu - pg 20 (back cover)Screen uSa - pg 14

universal equip. Mfg. - pg 13Vermeer/Wildcat - pg 17

West Salem Machinery - pg 12

tRaNSPoRt tRaILeRS

trinity trailer Mfg - pg 5

2 Soil & Mulch Producer News May / June 2010

Info Request #100

Mulch In The Morning Chips In The Afternoon

BUILDING EQUIPMENT THAT CREATES OPPORTUNITIES

MORBARK® GRINDERSMore Versatility. More Opportunity. Normally, high-quality chips and mulch are produced on separate machines, but with the Morbark Quick Switch, you can produce both products and virtually double your market opportunities with a single Morbark grinder. The best horizontal grinders on the market are now the most versatile with the introduction of the Morbark® Quick Switch Grinder-to-Chipper Conversion Kit.

Horizontal Grinder-to-Chipper Conversion Kit.Turn grinder downtime into profi t by modifying the hammermill of your Morbark horizontal grinder in the fi eld – without special tools or heavy equipment. Make the switch and produce high-quality biomass fuel chips in only a few hours!

From Grinder to Chipper in Record Time!

MORBARK®

Go to Morbark.com/QuickSwitch to see a video demonstration or call 800-831-0042 for more information.

3May / June 2010 Soil & Mulch Producer News

Soil & Mulch Producer NEWS

Continued from page 1

Publisher / EditorRick Downing

Contributing

Editors / WritersP.J. Heller

Robert J. Rua

Production & LayoutBarb Fontanelle

Christine Pavelka

Advertising SalesRick Downing

Subscription / Circulation

Donna Downing

Editorial, Circulation& Advertising Office6075 Hopkins RoadMentor, OH 44060Ph: 440-257-6453Fax: 440-257-6459

Email: [email protected]

For subscription information,please call 440-257-6453.

PUBLICATION STAFF

Soil & Mulch Producer News is published quarterly by Downing & A s s o c i at e s. Re p ro d u c t i o n s or transmission of Soil & Mulch Producer News, in whole or in part, without written permission of the publisher is prohibited.

Annual subscription rate U.S. is $19.95. Outside of the U.S. add $10.00 ($29.95).ontact our main office, or mail-in the subscription form with payment.

©Copyright 2010 by Downing & Associates

Those payments and new applications for collection, harvest, storage and transportation of eligible materials were put on hold while government officials sought comment on final rules for the program. The comment period ended April 9 and more than 24,000 responses were received, according to government officials.

“We’ve very much aware of the concerns of the mulch industry, and we’re listening,” says Todd Atkinson, a senior policy advisor in the Farm Service. “We’ve had a large volume of mulch suppliers submit formal comments on the proposed BCAP regulation. Every one of these comments will receive careful examination in the development of the final BCAP rules.”

Those rules are not expected for months. Exactly what those new rules will entail is

unknown, although there have been hints that they might limit the use of so-called “higher-value” resources as well as putting a cap on the funding for the program. The mulch industry is essentially lobbying for a more level playing field, although there appears to be varying opinions on just how to accomplish that.

Those opinions range from having forest products excluded from the list of items eligible for BCAP funds to including mulch producers as those eligible for subsidies.

“Either the government needs to get out entirely or rewrite it to accomplish the original goals,” Leber suggests.

The Mulch and Soil Council offered four recommendations to address the issue:

Freeze BCAP funding of forest products •until “higher-value” resources are properly defined and protected from the temporary, artificial and unfair market conditions created by BCAP.Focus BCAP on the original objective •of incentivizing farm production of new, renewable biomass crops.Limit BCAP funding for the forest products •industry to establishment grants for new tree farms dedicated to expanding biomass supplies.Assure America’s ability to meet our own •carbon reduction goals by continuing tax credits to U.S. companies for utilization of biomass energy technologies and enforce the rules prohibiting taxpayer subsidies of foreign-owned companies.Industry officials complain that many of

the plants receiving BCAP money are producing fuel pellets or pucks which are then being shipped overseas.

“It doesn’t seem like the right thing to do with our natural resources,” says Spencer, who would like to see products created with BCAP funding banned from being exported.

“Why are we considering funding an industry with government money to consume our raw materials to make products which will

be shipped to Europe and Asia so they can meet their Kyoto protocol requirements at the expense of damaging or destroying our own strong mulch industry in this country and consuming our raw materials,” he asks.

“In a few years it will be necessary for the United States to meet their own Kyoto protocol,” he says. “If the BCAP program is going to continue, then the wood pellet/puck export market should be excluded as an acceptable product.”

Leber, too, expresses concern about the overseas shipments.

“I have a problem with it personally that the government is going to subsidize exports,” he says. “The money that goes to buy the fuel that makes pellets is then going overseas by a substantial percentage.”

Spencer, among others, points to the fact that mulch is the “ultimate green industry” while biofuel plants may leave something to be desired.

“Power plants and fuel producers will still create some level of pollutants through the consumption of energy in the processing cycle or by burning the product,” he says. “It seems completely counter productive to damage one industry that is already benefiting the ecology to start a new industry that will be less environmentally friendly.”

Leber says he doesn’t believe there was “evil intent” behind the original measure but that it just “ran amok,” an opinion echoed by others in the industry.

Notes Liffers: “Here’s an example of where the system has gotten completely out of control and completely overlooked an entire industry and doesn’t seem to care.”

Leber’s company has been forced to pay double for raw materials, costs which he says cannot be passed on to clients due to previously negotiated contracts.

“We eat it,” he says of the cost differential. “We have to honor those (contracts) through the fall. The fact that the price jumped and nobody saw it coming, that’s not their problem.”

Spencer and others note that even a small change in material costs can have a huge effect on their businesses due to existing contracts, coupled with the small margins available to producers.

“It is highly feasible that the effect of BCAP at the beginning of a season could dramatically impact the cost and availability of the raw materials required to satisfy contractual obligations to customers by producers. This could result in default and possibly failure of some companies,” he warns.

At Coastal Supply, Liffers reports that demand for mulch has “skyrocketed” this year, due in part to a recovering economy.


Continued on page 4



Info Request #119

“We’re right in the middle of a historic season,” he says. “The April season exploded like no other season.”

The demand for mulch — and the reduced supply caused by raw materials being diverted for biofuels — prompted Liffers for the first time to hire someone to handle procurement in order to source material.

“We’re having to go further for supplies. We’re having to pay more for supplies. We’re having to deal with significantly more buyers to get the same amount of material,” he says. “Before, people would come to us.

“There is a crisis going on right now,” he adds. “There is a shortage of mulch.”

Spencer also laments the supply shortages and the higher prices. “It (BCAP) drastically affected the availability of wood fiber for our

business,” he says. “For this season, we seem to have squeaked by. We have managed to keep our supply at the level sufficient to supply our demand this season but we have had to work a whole lot harder and turn over a lot more stones to find sources that we’ve never had to do before.”

He reports that his company has also gone into the logging business.

“We have purchased logging equipment and we’ve got people out in the woods harvesting treetops, trees that are too small for lumber, in order to bolster that supply,” he says. “That effort is accounting for about half our supply, which we have never done before.”

While speculation continues about what the new rules may contain, there have been hints that the government’s push for advanced biofuels, renewable energy and biobased products may take precedence.

“What we would like to see happen is they protect the mulch industry in some way so that this bill doesn’t destroy us all or run the price of mulch up to where it’s not competitive any more,” Spencer says. “We have to wait and see.”Info Request #123

Technology For A Better Environment

www.komptechusa.com

Komptech USA Inc.1724 Majestic Drive #104Lafayette, CO 80026[P] 720-890-9090, [F] 720-890-5907[E] [email protected]

The Crambo is a slow-speed dual-shaft shredder for wood and green waste, and pretreated synthetic fractions. The slow shaft speed minimizes dust and noise. Hydraulic drive

with load-dependent speed control gives maximum efficiency.

• 8-12 gallons per hour (half cost of high speed machines) • High throughput, up to 130 t/h• Aggresive feed • Quick-change screen basket for fast particle size adjustment

• Mobile, to go where the work is

Continued from page 3




Info Request #153

T he last thing you want is to spend precious time and effort sweeping the trailer

bed. Eagle Bridge Trailers feature angled sides and a reliable, low-maintenance

overlapping chain-and-fl ap conveyor unloading system. That’s why we unload faster

and cleaner than a moving fl oor style trailer. Our standard, low-

friction, hard plastic liner works great for colder climates and

wet or adhesive payloads.

Eagle Bridge Trailers are strong enough to handle virtually any commodity, including

seed, feed, and fertilizer. You can make money on back-hauls without worrying about

damage to the trailer. Plus, you never have to push a broom. Call 1-800-235-6577 for

more information.

Stainless steel available.

Belt widths from 25” to 61”.8200 Eisenman Road, Boise, Idaho 83716 • Fax: 1-208-336-3741 • www.trinitytrailer.com

Info Request #159

Missouri Residents Seek to Block Wood Burning Power Plants

In 2008, Missouri voters approved a law to acquire 15 percent of the state’s energy from renewable sources by 2021, reports stltoday.com. Energy producers responded by promising to build wood burning

power plants that would provide electricity for thousands of homes, but now, many are trying to block the construction of these plants over concerns about the depletion of the Ozark forests, air pollution and harm to fresh water supplies. The list of opponents to these new plants includes state regulators, environmentalist, home owners and timber industry officials.

In Perryville, Liberty Green Renewables (LGR) awaits approval from the Missouri Department of Natural Resources for an air permit, so the company can begin construction of a new $120 million 32-megawatt plant, which could supply power for 23,000 homes. In Sedalia, ProEnergy intends to build a similar plant.

The Missouri Coalition for the Environment is encouraging its members to oppose these plants, claiming they would be new sources of particulate matter, carbon monoxide, volatile organic compounds and carbon dioxide. But many city leaders aren’t convinced, and feel that the plants would emit little more than steam. LGR, for example, uses a type of technology that limits plant emissions to 10 percent of the sulfur dioxide and other particulate matter produced by coal-fired plants.

Whether or not the plants would endanger the Ozark forests seems to be a matter of scale. According to a study by the Missouri Forest Products Association, the state’s forests could sustain relatively small biomass plants without detriment to the environment. ProEnergy has proposed to build a plant in Salem capable of producing up to 20 megawatts. It would need about 300,000 tons of biomass annually, about twice the amount available in the Salem area.

888-561-6011 www.duratech.info/soilFlexible retail financing available. Contact your local dealer.

PO Box 1940 • Jamestown, ND 58402-1940

Meet Our Newest Addition.

DuraTech’s versatile NEW 5064 Horizontal Grinder is built to meet all your grinding needs. Not only is the 5064 available on either a track or trailer, but you can also choose from three different levels of CAT Tier III horsepower ranging from 475 hp (354 kw) to 630 hp (470 kw). The large feed opening and 64 in. hammermill maximize grinding capacity and minimize job time. This midsized grinder increases your efficiency and maximizes your investment.

5064 Horizontal Grinder



Info Request #154

W hen it comes to equipment for mulch producers, there’s good news and bad news. The good: There are numerous companies offering a wide range of horizontal grinders, tub grinders, shredders and

other equipment and accessories to serve the industry. The bad: There are numerous companies offering a wide range of horizontal grinders, tub grinders, shredders and other equipment and accessories to serve the industry.

For mulch producers, the dilemma is having to sift through the brochures, Web sites and other materials to try to determine what equipment will best suit their needs. Horizontal or tub grinder? What capacity? Will the machine be able to handle future business growth? What about biomass applications?

“Don’t try to reinvent the wheel,” advises Bob DeSousa, general manager at West Salem Machinery. “Look at what’s been successful and is utilized in the industry.”

The other issue he stresses is a machine’s strength and durability. “Look at component sizes in a given machine, whether it be shaft diameters, bearing sizes, hammer weights, machine weights,” he says. “In the mulch industry you’re bringing in a wide range of materials that you do not control until it hits your plant floor. So it’s not a matter of ‘if’ there’s going to be something in that raw material pile that you didn’t anticipate, it’s just a matter of when and how often.”

“There’s a variety of factors that go into selecting equipment,” says Todd

Dunderdale, director of sales at Komptech USA. “You’ve got to take a look at your incoming feedstock. What is your desired output? And it comes down to cost per ton. What is your operating cost, complete totally loaded operating cost? You can’t know what to sell it for it you don’t know what it costs to produce.”

“Buy the most substantial grinder with the most horsepower that you can afford rather than undersizing your needs,” advises Brian Bergman, operations manager at CW Mill Equipment Co. He admits that “at the end of the day, it will come down to your budget.”

Todd Roorda, environment solutions specialist with Vermeer Corp., agrees that budget constraints often influence buying decisions, but opting for the most substantial machine available should be the goal. “You could probably make yourself some mulch with a backyard wood chipper but if you’re going to be in the business, that wood chipper may not last you very long and it won’t be able to keep up,” he says.

Ultimately, the end product that you are trying to produce (i.e. fuel pellets, wood chips or mulch) will determine the type of equipment you will need to purchase, whether it be grinding, chipping or shredding equipment. Although the demand for landscape mulch continues to be strong, manufacturers have recognized a shift in the market to an increased demand for biofuel. In response to this trend, many manufacturers have introduced new machines and attachments to meet market demand.

By P.J. Heller

Continued on next page


Soil & Mulch ProducerNEWS

The following companies, listed in alphabetical order, are among those that manufacture equipment for both mulch and biofuel production.

Continued from previous page

CW Mill Equipment Co.

CW Mill makes no bones about the capabilities of the grinders that it manufactures, describing

them as “monsters.” Little wonder then that the company markets its line of diesel and electric powered grinders under the HogZilla name.

“HogZilla grinders are monster grinders for solid waste reduction, wood recycling, land clearing, construction demolition, mulch production, tire processing or any other tough grinding application,” the company boasts.

CW Mill, based in Sabetha, Kans., was started in 1974, with the HogZilla brand launched in the late 1980s to serve the needs of the wood products industry. Today, the company manufactures four series of tub and horizontal grinders, ranging from mid-size models with about 400 horsepower to the most popular 1,050 horsepower machines and beyond.

“Because of the requirement to grind wood, you want a well built machine and as much horsepower as you can afford,” says Brian Bergman, operations manager. “Mulch producers are dealing in volume. It takes a pretty serious mach ine to se rv ice them.”

Bergman says it is false economy for mulch producers to skimp on the purchase of a grinder.

“If they buy a newer light duty machine because it seems more affordable, they may be paying more for it over the long haul than if they had purchased a heavy duty machine, even a used machine, which would be more substantial to handle the work,” he says. “They should buy the most substantial grinder with the most horsepower that they can afford rather than buy an undersized unit.”

HogZilla grinders include self-propelled track drive and self-loading units.

“We’re widely known for our torque converter drive that provides more production capability and better protection for the grinder,” Bergman notes.

The torque converter drive — widely used in the

rock crushing industry —allows the engine to always perform at peak efficiency with multiplied torque, Bergman explains. The converter carries a five year, 6,000 hour warranty.

The company says the drive allows users to get “more production generating torque from the same engine burning the same fuel.”

In addition, it says, the HogZilla grinder/engine governor control system provides fuel savings by matching optimum power (fuel consumption) with changing load requirements to prevent unnecessary fuel consumption.

CW Mill equipment Co.14 Commerce driveSabetha, KS 66534Phone: (800) 743-3491www.hogzilla.com

DuraTech Industries International

When farmer and rancher Joe Anderson couldn’t find an affordable and suitably sized hay grinder for his livestock herd,

he set out to solve the problem himself. From that simple effort in 1966 has emerged

DuraTech Industries International, a major manufacturer of agricultural and industrial machinery.

The company’s line of industrial equipment includes heavy-duty tub and horizontal grinders, ranging from a 9-foot, 325-horsepower tub grinder to its most recent offering, a 950-horsepower horizontal grinder with a 64-inch wide, 12,100 pound hammermill. Between those models are a range of mid-size grinders. Both trailer and track-mounted units are offered.

Marketing manager Al Goehring says part of the success of DuraTech grinders is due to their unique features, notably self-cleaning screens rather than more conventional reversing fans.

“All DuraTech grinders have enclosed engine compartments with self-cleaning rotary screens on the air intake,” he says. “Having the engine compartment enclosed and the air intake pre-screened helps keep the engine compartment clean and keeps the radiator and oil

coolers clean, so there’s much less maintenance on the machine. It reduces the dirt and buildup on the engine for cleanup as well as the chance of a fire, since you don’t have much of a buildup on the mani fo lds that are hot.”

The enclosed engine compartment also helps reduce the engine noise. “It basically forces all the sound down and then that’s absorbed by the ground,” he notes.

DuraTech was also a pioneer in developing oscillating stacking conveyors, Goehring says.

The company, based in Jamestown, N.D., is pursuing the “emerging” biofuels market, according to Goehring.

“It’s not there yet and there’s a lot to be learned there,” he says. “We are very interested in pursuing that market.”

G o e h r i n g s a y s i t ’ s important for mulch producers

to match a machine to their operation. “If you oversize your machine or undersize

it, you’re not going to have the efficiency built in,” he advises.

“It’s nice to sell a big grinder but it may not meet a customer’s requirements,” he says. “You might be able to get your grinding done in a hurry, but it’s not going to be economical and provide a return on investment. It’s not going to be a good fit.”

DuraTech Industries International, Inc.P.O. Box 1940Jamestown, ND 58401Phone: (701) 252-4601www.duratechindustries.net

Continued on page 8



Continued on next page

Things to Consider Before Purchasing a New Shredder, Grinder or Chipper Continued from page 7

Komptech USA Inc.

W ith its corporate roots in Europe, Komptech USA describes itself as the complete “one-stop shop” for the

waste industry. “We have the largest product line of anyone

in the industry,” contends Todd Dunderdale, director of sales. “We do windrow turners, star screens, trommel screens, shakers, spreaders, mixers, chippers, shredders, grinders. Anything that involves waste we can handle.

“I would like people to think we are the one-stop shop when it comes to the waste industry,” he says.

Komptech was founded in 1987 in Austria by Josef Heissenberger and Rudolf Pretzler as an engineering office for agricultural machinery. The U.S. sales organization in Lafayette, Colo., was opened in 2007.

The company manufactures both chippers and shredders designed for the mulch market. Its Crambo Forest shreds wood down to mulch size; a screen deck under the shaft sifts dirt, needles and rock to produce a clean product in a single pass. That feature can be especially important to mulch producers who are working with forest slash, Dunderdale says.

In essence, he says, the Crambo Forest can be used in the field rather than requiring several machines to accomplish the job.

The Crambo unit is available in mobile or stationary configurations. Both are dual

shaft shredders. Slow-running screws with shredding tools minimize fine particle and noise and dust emissions, and build up resistance to contamination, according to the company. Particle size is adjustable by simply exchanging screen baskets. A hydraulic drive with load-dependent speed control ensures maximum utilization of

motor output.Dunderdale says that the Crambo units are

ideally suited for mulch producers. “Over the years people have gotten so conditioned to seeing mulch as a chip,” he says. “Actually mulch as a

shred works very well because it allows better aeration in the root system.”

The company’s Chippo series is designed for whole log chipping.

Dunderdale says that rather than focus on high-speed grinders for the forestry business, Komptech views the market as a waste application.

“We have a variety of different machines to handle a variety of waste streams,” he says. “It’s a different approach. The American approach is to throw a big engine in it and go out and use one machine to do everything, even though it’s not designed to do that. In Europe, there’s more attention to detail and design and specifically to design a machine

for each application.”

Komptech USA Inc. 1724 Majestic Drive #104Lafayette, CO 80026Phone: (720) 890-9090www.komptechusa.com

Morbark, Inc

The motto of Morbark, Inc., — “building equipment that creates opportunities” — pretty much sums up the company’s

success in serving the wood products industry. “The one thing that we focus on is matching

solutions to our customer’s problems,” explains Chris Edmonds, assistant regional manager for the Western U.S. “We look to help the customer maximize opportunities with our machines.”

To help mulch producers who may be affected by the slumping housing market, for example, Morbark has introduced its Quick Switch grinder-to-chipper conversion kit. The kit allows a Morbark horizontal grinder owner to easily convert the machine from a hammermill to a full chipping drum in order to produce high-quality wood chips.

Two configurations of the kit are available, one a 12 knife for making standard size chips, the other a 16 knife for making sawdust. The changeover takes about three to four hours.

“Our Quick Switch allows grinder owners the opportunity to diversify their product offering without having to purchase a s e c o n d m a c h i n e , ” Edmonds notes.

“It helps open up another revenue stream for

mulch producers,” adds marketing manager Tim Adams.

“This is a tremendous innovation for our customers,” says John Foote, vice president of sales a n d m a r k e t i n g . “ T h e Q u i c k Swi tch’s ab i l i ty t o change f rom grinding to chipping and back creates opportunities for horizontal grinder owners by giving them new markets to supplement their grinding operations.

“It is an ideal solution for anyone involved in, or wanting to be involved in, supplying biomass

fuel,” he notes. The kit is just the latest

in a long line of grinding, chipping and sawmil l products — including five different sizes of horizontal grinders and six different sizes of tub grinders — manufactured by the Winn, Mich . , company. The company has been serving

the composting, mulch, forestry, recycling, tree care, biomass and sawmill markets since 1957.

“The best machine for our customer has n o t h i n g t o d o wi th gr inding,” Edmonds says. “It has to do with his business model, which one fits his level of business, his location, the contracts he has in hand and the p r o d u c t t o b e ground.

“We work with out customers to find out their exact

requirements,” he says. “We have multiple sizes of machines to fit their particular needs. We’re looking out for his success. If they’re successful, we’re successful. We want to make sure they have the right piece of equipment.”

Morbark, Inc. 8507 S. Winn RoadP.O. Box 1000Winn, MI 48896Phone (800) 831-0042www.morbark.com


Soil & Mulch ProducerNEWSContinued from previous page

Continued on page 10

Peterson Pacific Corp.

Unable to find equipment suitable for their land clearing and construction needs led to the founding of Peterson Pacific Corp.

“We were working on a lot of sites that had a big waste wood issue . . .” recalls Cody Peterson, son of the company founder and now product manager at the firm. “In reviewing the technology that was out there for grinding that type of material, it wasn’t that good so we saw a niche in the market for developing wood recycling equipment. We saw that there was a need for a different type of machinery, so we came out with a completely different style machine.”

The rest, as they say, is history. Today, the Eugene, Ore. , company

manufactures whole tree chippers and debarkers, horizontal grinders and blower trucks and trailers. Its first wood recycling machine was introduced in 1990, nine years after the company was founded.

The company manufactures four basic size horizontal grinders all of which are available as track mounted or rubber tire units. Each of the four model lines is available in both diesel and electric configuration. Its largest uni t can p r o c e s s l a r g e

stumps which typically would require a tub grinder, according to the company. The grinders range from 475 horsepower up to 950 horsepower.

The grinders feature an innovative latching impact release system, which m i n i m i z e s damage from contaminants such as metal in the feed m a t e r i a l , according to Cody Peterson. The anvil and first grate open on a severe impact, allowing the contaminant to be ejected, and then re-latch to permit continuous grinding.

The machines also offer a quick-change m u l t i p l e g r a t e system, allowing use r s t o eas i ly customize grate configurations to produce a wide variety of finished materials. Grates are removed through an access door on the side wall.

The grinders also feature the company’s adaptive feed system which varies the feed speed to the engine.

“Rather than start-stop, you have a c o n t i n u o u s flow,” Peterson e x p l a i n s . “In a mulch application, any time you unload the chamber and reload the chamber, you get some o v e r s i z e product that

comes through. Having that consistent flow means a more consistent end product for the customer.”

Peterson adds that the company’s focus is on manufacturing high-quality grinders of 450 horsepower or greater.

“We would have a hard time producing a Chrysler and a Mercedes in the same facility,” he says.

Peterson Pacific Corp.29408 Airport Road P.O. Box 40490Eugene, OR 97402-9541Phone: (541) 689-6520www.petersoncorp.com

Screen USA, Inc.

B est known for its wide range of screening equipment — including trommel, shaker, star and box screens — Screen

USA recently introduced a small horizontal grinder specifically geared for small volume applications.

The company’s Hammerhead grinder is being marketed to composters, landscapers, landscape supply houses, utility companies and mulch manufacturers.

“It’s not a stump grinder,” explains Rick Cohen, owner and president of the Smyrna, Ga., company. “It’s strictly for brush and wood 9 to 10 inches and smaller.”

Screen USA, which started in 1973, has built its reputation on manufacturing niche products for the screening industry, and Cohen says the Hammerhead grinder is a niche product for the grinding industry.

It is the first grinder offered by the company.

“We’re trying to cater to customers who have been asking for a horizontal grinder but did not need the huge $400,000 to $500,000 grinders,” he says.

T h e g r i n d e r comes standard with

a Flexxaire reversing radiator fan to help prevent overheating and clogging. It also features a variable speed feeder that is wide enough — 4 - f e e t , 5-inches — to handle pallets. A radio remote control is standard.

C o h e n notes that the unit is extremely portable and with its electric braking axles can be pulled behind a one ton truck.

“You can take it out and set it up in five minutes and be ready to go,” he says.

W h i l e o t h e r manufacturers boast of machines having 5 0 0 a n d 1 , 0 0 0 horsepower motors, the Hammerhead only has a 140 horsepower engine.

“It’s small for the industry,” Cohen admits, “but it’s all you

need for what it’s designed to do.“We don’t have a lot of competition

because everybody is making larger grinders,” he says. “We decided to design a smaller one with a price tag that landscapers and composters can not only afford to buy, but to operate.”

C o h e n notes that the grinder follows

in the company tradition of developing innovative niche products.

“We do not believe in making something that everybody and their brother makes,” he says. “Our whole theory of business is to make niche items — to come up with unique items, unique sizes — and to improve upon something so that we have a better machine than everyone else.”

Screen USA, Inc.1772 Corn RoadSmyrna, GA 30080Phone: (770) 433-2440www.screenusa.net



Vermeer Corporation

A modified farm wagon with a hoist that was invented more than 60 years ago by Gary Vermeer has spawned an agricultural,

construction, environmental and industrial equipment manufacturing company.

Among the Pella, Iowa company’s numerous products are horizontal and tub grinders designed for mulch producers.

Horizontal grinders, ranging from 250 to 1,050 horsepower, are available as conventional towed models or self-propelled track mounted units. The extra-long feed tables on the trailer-mounted grinders allow for loading of long material without additional cutting.

A relatively new addition to the horizontal grinders is a product called the fuel chip attachment (FCA), which will allow the machines to produce wood chips for the biomass market.

“The attachment allows customers to add it to the grinder to meet new markets,” explains Todd Roorda, environmental solutions specialist at Vermeer.

“Each biomass end-user requires that their chips meet stringent specifications in terms of size,

shape and quality,” Roorda says. “This is important as an improperly sized or low-quality chip may adversely affect the efficiency of the furnace and overall facility operation. Our attachment

provides the flexibility needed to produce chips that meet varied specifications and helps create new opportunities for our customers.”

In addition to the horizontal grinders, Vermeer offers tub grinders, in 440 and 100 horsepower configurations. They feature high-capacity discharge systems, one-pass grinding and are available with loader and non-loader options.

Both horizontal and tub grinders incorporate Vermeer’s duplex drum system, which the company says offers a 35 percent increase in rotational inertia with a 10 percent weight

reduction. It also offers an operator the ability to change out any individual hammer within minutes without removing other hammers. The hammers also reverse for nearly double the life span, and the drum skin adds life by protecting them from wear and tear, the company says.

To provide customer service, the company touts its nationwide dealer network.

“We recognize at Vermeer that the sale is only half of the relationship with a customer,” Roorda says. “It’s the service that

has to follow after the sale that keeps the customer happy in the long run.”

Vermeer Corporation1210 Vermeer Road EastPella, Iowa 50219Phone: 641-621-7996 www.vermeer.com

West Salem Machinery

W ith a 60-year history of wood reduction and screening, family-owned West Salem Machinery Co., prides itself

on catering to the specific grinding needs of its customers.

Founded in 1947 to originally serve sawmills, panel plants, pulp paper mills and the wood products industry, the company has expanded its offerings over the past two decades to meet applications including mulch, compost, recycling and construction demolition reduction.

“We can go in and offer a turn-key engineered system as opposed to just supplying one componen t , the grinder,” notes B o b D e S o u z a , general manager of the Salem, Ore., company.

R a t h e r t h a n t ake a “cook ie -cutter approach” with only a handful of machines, West Salem Machinery boas t s some 40 different models o f r e d u c t i o n equipment, all of which feature a plethora of options

such as different rotor systems and hammer types. The company primarily offers fixed-site electric equipment.

“We’re not a one-size-fits-all company,” DeSousa says. “We look at the application first and then go back and actually not only just configure the s y s t e m , b u t configure the actual grinder to optimize its performance on

a species of wood or a size of wood. It’s a solution that caters to the customer’s specific requirements.

“We factor in not just the capacity of the material but the species, the piece size, the fiber geometry,” he notes. “We have a test lab so customers can send us samples and we will do grinds and sieve analysis to show exactly what we can give them. When we do get the job, everybody knows exactly what it is that the customer wants and what the customer is going to receive.”

One of the machines recently developed — a 48-inch diameter with an 88-inch

wide rotored hammermill — is believed to be one of the largest hammermills currently offered. It is designed “to satisfy some of these higher capacity fine-grind applications,” DeSousa says.

In addition to the mulch industry, West Salem has a long history of manufacturing equipment for wood-fired energy plants. With the advent of new biomass plants, the company has invested heavily in the testing and development of equipment specific to those emerging fuel products, he says.

For mulch producers looking for grinders, DeSousa recommends looking at equipment manufacturers with experience and machinery that is durable and reliable.

“There’s no substitute for strength and durability built into a machine,” he says.

West Salem Machinery Co. 665 Murlark Ave. NWP.O. Box 5288Salem, OR 97304Phone: (800) 722-3530www.westsalem.com

Things to Consider Before Purchasing a New Shredder, Grinder or Chipper Continued from page 9



Info Request #136

Linn County, OR Partners with Allied Waste for Food Waste Compost Program

Residents of Linn County in Oregon will soon benefit from a new food waste recycling program thanks to a new

partnership between the county and Allied Waste, reports democratherald.com. Food waste will be picked up curbside weekly and transported to the Pacific Region Compost Facility, a two-acre site near Adair Village, for composting. The facility has received food waste from area restaurants since last November.

Meat and dairy products, vegetables, fruit and other food waste will be picked up curbside each week to avoid odor issues. Once the materials reach the composting site they will be sorted and mixed with ground-up wood waste and yard debris. The mixed material will be heaped in 80-foot long 8-foot high windrows to cook for about 45 days. It will then be cured, screened, tested and decomposed for 75 days before being sold as a soil amendment for $12 a yard.

The facility is a much needed option for recyclers. Currently, Portland trucks haul waste all the way to Seattle for recycling. The Adair facility cuts travel in half.

Michigan Company’s Grinder Featured in Hit Reality Show

A 45-ton grinder is the newest star of “Swamp Loggers,” the Discovery Channel’s popular reality show that

airs on Tuesday nights, reports themorningsun.com. The grinder, which is manufactured by the Michigan-based company Bandit Industries is called The Beast.

Now The Beast can add “TV star” to its resume. “Swamp Loggers” follows the day-to-day exploits of Goodson’s All Terrain Logging, Inc. and its team of loggers as they ply their trade in soggy woodlands of North Carolina. The Beast will be featured on the show throughout the current season, helping the swamp loggers tackle some of the toughest working conditions imaginable. The show’s cameramen capture The Beast from a number of angles as it chews up a variety of woody material.

Bandit Industries’ products are sold across the globe, and in 2010 they were named Trader of the Year by the West Michigan World Trade Association – an award for businesses that demonstrate commitment to bring international trade to the region.

Info Request #156

Correction

In the March/April edition of Soil & Mulch Producer News, we featured a cover article titled: Biomass Makes the Grade for

Renewable Energy Producers. In that article (see page 4, paragraph 3) we mistakenly stated that “CRER has a 10-year stewardship contract with the Apache and Sitgreaves National Forests Service in Arizona”. This statement was incorrect and should read: “Future Forest has a 10-year stewardship contract with Apache and Sitgreaves National Forests in Arizona”. If you would like more information about Future Forest and their stewardship contract with Apache and Sitgreaves National Forests, please refer to their website at futureforest.info.



Info Request #151

Info Request #144

North Carolina in Fight Over Wood Burning Power Plants

Charlotteobserver.com reports that environmental advocates are fighting Duke Energy company over its plans to burn wood at two of its coal-fired power plants. They are claiming the plants

will endanger North Carolina’s forests. Duke has tested wood burning furnaces at plants it owns in Rowan County, but has not yet begun using them to generate energy in earnest. The test furnaces burned whole trees which were cut into chips.

The Southern Environmental Law Center (SELC) issued a legal challenge last month with the hope of making the state’s trees off limits for burning. SELC and other environmental advocacy groups fear increased logging to feed the needs of utilities will decimate North Carolina’s forests. But if trees are made off limits it could endanger the ability of Duke Energy and other utilities to reach the state’s mandate of deriving 12.5 percent of its electricity from renewable sources by 2021.

Duke officials say they don’t know for sure what forms of wood they would burn at their plants, but would like to maintain the ability to burn whole trees if desired. They claim that excluding whole trees “would severely limit the ability of our utilities and potential investors in biomass power production to use biomass resources.”

The state Environmental Management Commission (EMC) agrees with the SELC that using whole trees for energy production would make a significant impact on the environment. The EMC advises that whole trees should only be burned if they are harvested under strict standards. Robert Abt, an economist with N.C. State University, says forest products can generate half the state’s renewable energy, but adds that wood debris can’t supply it all. Without whole trees, he says, only about half the state’s portfolio standards can be met. Abt adds that prices will rise for pulpwood if it was allowed to be burned for energy, which would be a boon for forest owners.

Exposure to Compost Piles Could Lead to Serious Respiratory Ailments

The UK Health and Safety Executive recently revealed the results of comprehensive study on the potentially detrimental health effects of working in close proximity to compost, reports mrw.co.uk.

According to the study, employees working too close to compost piles for too long can be exposed to large concentrations of harmful bioaerosols. If not protected, workers could develop serious respiratory ailments.

The report claims that health risks are reduced significantly at between 50 to 100 meters downwind from the source. Closer distances, however, could expose unprotected workers to colonies of airborne bacteria, fungi, actinomycetes, endotoxins and bioaerosols – airborne particles produced by living organisms. Interestingly, the UK research team found that in-vessel composting systems generate just as many harmful airborne particles as open windrows.

Denver Airport Launches Composting Program

After the success of a pilot program begun last year, Denver International Airport (DIA) is ready to take off with a new organic waste composting program, reports asiatraveltrips.com. DIA will

team up with A-1 Organics to set up 65-gallon containers for the airport’s employee break rooms and restaurants in the Jeppesen Terminal. Janell Barrilleaux, DIA’s director of environmental programs, says “We’re thrilled to be moving forward with a permanent composting project at DIA… this new program will allow us to compost organic waste that would otherwise end up in Denver’s landfills.”



FOR SALE: An organic composting business that serves Collier County, Florida’s largest and most wealthy county, recycling green waste and composting soil.

MARKETINGComposted soil, mulch, stone,

landscape supplies & much more

GREEN WASTEReceiving over 23,000 cubic

yards of green waste annually

Call FRED MUELLER, CCIM 239-216-4944 or 239-597-8530

ENJOY NAPLES – The Jewel of S.W. Florida

17.45 acres with 660 feet on a Major Highway (Rt. 846 - Immokalee Road) 30,000 cars daily - a very profitable and growing business.

Price and financials will be supplied to interested buyers.

Info Request #152

—introducing—720 Hornett trommel Screen

for High Capacity Screening

• Mobile with no set-up time• Removable punch plate drum• High capacity• All U.S. manufactured parts

Call or email today for a quote or further information:

[email protected]

Universal equipment mfg.2140 Advance Ave., Columbus, OH 43207

Ph: 614-586-1780 • Fax: 614-586-1781

FOR SALE:Hogged Hardwood material. Can be used for mulch, boiler fuel, etc.

material is located in Northwestern Pennsylvania. Contact Jacob weaver at 814.425.2500 ext. 224

or [email protected]

Study Reveals Scope of North American Forest Loss

A new study released by South Dakota State University (SDSU) claims that the greatest loss of forest cover between

2000 and 2005 was not in South America’s rain forests, as one might expect, but in North America’s boreal forests, reports newswise.com. Using satellite imagery, the SDSU team found that North America had the greatest area of gross forest cover loss (GFCL), accounting for 30 percent of worldwide totals. Combined, North and South America accounted for half of the globe’s GFCL. The greatest causes of GFCL in North America, says the SDSU team, were logging (60 percent) and fires (40 percent), followed by insects and disease. Researchers do add, however, that their study in no way indicates recovery rates.

NSWMA Weighs In on New York Food Waste Composting Bill

Recently, the New York City Chapter of the National Solid Wastes Management Association (NSWMA) submitted its comments to the New York City Council’s Sanitation and Solid Waste

Management Committee regarding a proposed food waste composting bill that calls for a study and pilot program for composting waste, reports eponline.com. The bill would also allow the NYC Business Integrity Commission (BIC) to alter its rate cap; effectively allowing city officials to reduce the tip fee for source separated compostable waste.

The NSWMA says the pilot program is unnecessary since licensed haulers already collect compostable materials from NYC restaurants and other waste generators for delivery to facilities in New Jersey, upstate New York and Connecticut. The Association argues that city officials could simply gauge the experience of these haulers to learn about the challenges and costs of managing a food waste composting program. It also argues that reducing the BIC rate cap will not reduce the amount of food waste from generators. The NSWMA wants the city to instead do away with the rate cape claiming it distorts the market for commercial waste services in the city.

The NSWMA’s chair says the bill creates the wrong kind of economic incentive for generators of compostable waste and that market forces should determine the price of composting material. He adds that the program would require additional trucks for collection and further distances to dispose of it, reducing some of its environmental benefits.

attention readers!Would you like more information about products and equipment advertised

in this issue? If so, please complete the Equipment Locator Service form located between pages 10 & 11 and fax to 440-257-6459.



Info Request #104

Cell 620.408.8330 620. 225.1142

Roto-Spread Available in truck or trailer in sizes ranging from 362 to 802 cu. ft. capacity.

Take time today, call for more information

www.rotomix.comWatch the Staggered Rotor in Action

Composting Performance

Sizes from 14 to 37 cu.

yds.

Offering the Best

for the Compost Industry

ROTO-MIX® LLC • 2205 E. Wyatt Earp • DoDgE City, KS 67801 • Fax 620.225.6370 • WWW.rotomix.Com

“Food waste is very dense, so pre-processing it before it goes into the windrow is crucial. We were looking for a machine that would enable us to size-reduce the corrugated cardboard and paper and blend it with the food scraps. After watching the ROTO-MIX horizontal mixer reduce the particle size as quickly as it does, I was impressed. Additional advantages to the horizontal unit is that it can be loaded quickly and mixed faster than a vertical mixer”.

Carla Castagnero, President—Ag Recycle, Pittsburgh, PA

Info Request #105

University Studies Wood Waste-Based Construction Materials

Lech Muszynski, assistant professor in the Department of Wood Science and Engineering at Oregon State University,

and his team have begun seeking funding for a study of the potential commercialization of wood waste-based construction materials, reports oregonbusiness.com. Each year, lumber mills produce tons upon tons of wood waste in the form of bark, branches and twigs that Muszynski says can be turned into a kind of “flour” that, when combined with thermoplastic, makes a durable composite hybrid material suitable for highway infrastructure. The hybrid material is an environmentally friendly alternative to structures made from metal, concrete, petroleum-based plastic and more expensive woods, such as mileposts, sound walls and dividers.

Though the hybrid material is petroleum-based, it contains a relatively small amount of plastic. OSU is currently conducting a pilot study of pavement markers made from the hybrid material. The OSU research team seeks to identify cost savings, the correct ratios of wood waste flour to plastic and reactions to contact with the ground and exposure to UV rays. According to Muszynski, the process of creating the hybrid material is uncomplicated. ODOT has already expressed interest.

Proposed Biomass Plant Faces Opposition in Maryland

A proposed $250 million, 60-megawatt power plant to be built by Adage LLC in Mason County, Maryland is facing

opposition from citizens over air pollution concerns, reports abcnews.go.com. The plant would reportedly burn wood waste collected from the forest floor to generate electricity. Though the county has ample supplies of easily accessible wood waste and the plant would create much needed jobs, some citizens fear the human health and environmental costs would be too great.

Adage has applied for an air pollution permit and will file an environmental assessment this summer. The company claims to be trying to build good faith by keeping its intentions about the project out in the open. It intends to lease roughly 100 acres for the new plant and has already secured more than 600,000 tons of wood to feed the plant. According to one engineer for the Olympic Region Clean Air Agency, the plant will only be approved if Adage can prove that it can meet EPA air quality standards.


THERE’S ONLY ONE MULCH MAGIC®

Mulch Magic is the most popular mulch colorant in the world, and for good reason. Not only did it revolutionize the mulch colorant industry, it continues to set the standard of excellence. Durable and super-concentrated, Mulch Magic delivers consistent coverage and intense coloring with a minimal amount of colorant. And, we back it up with unmatched customer support, world-class facilities, research and technologies, and an ISO 9001 quality control process — all to help you grow your business.

888.663.6980 | Colorbiotics.com© 2010 Colorbiotics

THECOMPLETEPACKAGE

Info Request #116



Info Request #107

Participation in PSU Food Recycling Program Grows

According to public works officials, participation in Penn State University’s curbside food recycling pilot program is on the rise, reports wjactv.com. In one month, 56 residences and ten businesses

joined the program, which is touted as the first of its kind on the East Coast. The program, which recycles food scraps, coffee grinds and other household waste materials, averages 12.3 pounds per pickup. Materials are picked up twice a week.

Thus far the program has diverted a reported 33,000 pounds of food waste from the landfill. The material is composted and eventually sold commercially. The pilot program is funded by a grant from the Department of Environmental Protection.

Food Composting Plant Closed Over Lawsuit

A lawsuit filed against Converted Organics (CO) has forced the company to close its Woodbridge, New Jersey food composting facility, reports nj.com. The suit, which was filed last May, alleged

that odors emanating from the facility were creating a public and private nuisance. CO was forced to pay more than $87,000 in penalties to the Middlesex County Health Department in connection with the complaints.

CO President Edward Gildea says he believes the odor issues had been addressed with recent equipment upgrades and says his company has made every effort to be a valued member of the community by providing jobs and recycling food waste. CO produced organic soil amendments and fertilizers using a proprietary high temperature liquid composting system.Info Request #155


Wildcat trommel screens and compost turners can help you produce a consistent end product.For nearly 40 years, Wildcat Manufacturing has been helping operators exceed their wildest expectations. Our products are powerful, productive, and backed by an industry-leading dealer network committed to your satisfaction.

From trommel screens to compost turners, we design and build equipment you can count on day after day. It’s easy to operate, easy to service, and the easy choice when you need high performance and consistent end product.

Call your nearest dealer or visit www.wildcatmfg.com today!

The WILDCAT LOGO is a trademark of Wildcat Mfg. Co, Inc. VERMEER is a trademark of Vermeer Manufacturing Company in the United States and / or other countries.

© 2010 Vermeer Corporation. All Rights Reserved.

WE’RE WILDLY CONSISTENT.

Info Request #141



Info Request #128

0%

FINANCINGfor qualifi ed customers

d-series for fine screeningd-series for fine screening

Call for DEMO & Rental Units

Call for DEMO & Rental Units

– Mix contaminated soil– Screen topsoil– Separate soil from limestone– Prescreen compost

– Mix contaminated soil– Screen topsoil– Separate soil from limestone– Prescreen compost

ALLU GROUP INC.Info Call: 1-800-939-2558 | Email: [email protected]

www.allu.net

Fuel Costs Hinder Northwest Wood Burning Utility

In Kettle Falls, Washington, the steam furnaces roar at a generating station operated by Avista Corp. producing electricity to power nearly 40,000 homes in Washington and British Columbia, reports

thenewstribune.com. The station burns wood waste at a searing 2,500 degrees, creating steam that turns energy-generating turbines. At least for now it does. Despite being located in the timber belt of the Selkirk Mountains, home to dozens of sawmills and logging operations, the Avista Corp. station has a serious problem obtaining enough wood waste to keep the furnaces roaring.

The problem, explains Avista power supply analyst John Lyons, isn’t that the Northwest has suddenly run out of waste wood. It’s the high cost of fuel to grind up low value wood and then truck it out of the mountains. When fuel costs rise too high, Avista is forced to shut down its operation, sometimes for weeks at a time. On a per-kilowatt basis, it costs Avista more money to produce electricity at its Kettle Falls station than it does at the company’s dams or from its coal-burning and gas fired plants.

“The Western US is biomass rich, but it’s still about fuel,” says David Naccarato of the biomass firm McKinstry Co. “Can you get it in reasonable quantities and affordable costs? That hasn’t been solved yet.”

The Kettle Falls station burns approximately 70 tons of wood waste for each hour it generates electricity. Because it needs such a high volume, fueling the station is a challenge. Timber industry downturns have made obtaining wood waste more difficult. To cope, Avista has begun buying wood waste from mills in British Columbia and working with loggers to salvage treetops and limbs that would otherwise be burned in slash piles. Most of the station’s wood waste is sourced within a 100-mile radius. Any farther than 100 miles and the waste becomes prohibitively expensive.


Info Request #127

2710C 4700B 4800E 5000H 5710C 6750B BTR

800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404

Waste In, Products OutHigh volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, nothing reduces urban wood waste, stumps, or brush like a Peterson horizontal grinder!

Just one look at a Peterson can show you why we build the most innovative grinders in the market. For nearly thirty years, Peterson’s attention to detail and drive to build the highest quality, highest volume producing machines make a Peterson a sure investment.

Want to see what a Peterson Horizontal Grinder can do? Give us a call at 800.269.6520 or visit us at www.petersoncorp.com.

PRSRT STDU.S. Postage

PAIDMentor, OH

PErMIt No. 2

6075 Hopkins Road • Mentor, OH 44060

Ph: 440-257-6453 • Fax: 440-257-6459Email: [email protected]

VoL. IV No. 3 May / JuN 2010

InsIde ThIs IssueIrate Mulch Industry Awaits New Rules on

Biomass Subsidy ProgramPAGE 1

SPeCIaL FeatuRe: Things to Consider Before Purchasing a New

Shredder, Grinder or ChipperPAGE 6

North Carolina in Fight Over Wood Burning Power Plants

PAGE 12

University Studies Wood Waste-Based Construction Materials

PAGE 14

Fuel Costs Hinder Northwest Wood Burning Utility

PAGE 18

Info Request #130

REMUREMU USA Inc.

Toll Free: 1-888-600-0018email: [email protected]

www.remu.fi

REMU screening buckets and plants• Screen without crushing (no sharp particles in the screened material)• Particle size starts from 5/8” minus (0-15 mm)• Models for nearly every size and type of base unit• Bucket volumes form 0,1 to 8 cupic yards• Lowest fuel and maintain costs

When materialgets moistand sticky

you know thedifference.

soil & mulch producer news - may/june 2010

Documents

irate mulch industry

mulch producers

mulch company officials

mulch company representatives

suggested industry letter

photo courtesy of mulch

new biomass resources

government subsidy program