bluepoint M E D I C A L

Made in Germany

SoftCap® – SpO2 SensorsOptimal patient comfort and reliable disinfection

Applications

Patient comfort

• Structured design elements for an ergonomic fit

• Compared to conventional finger clip sensor technology does not adversely affect perfusion

• Bio-compatible and latex free silicone housing helps to prevent allergic skin reactions

• Reduced pressure load on the finger enables longer repositioning intervals

Flexible and robust

• Elastic and flexible sensor head

• Sensor head resists highest mechanical stress in comparison to conventional finger clip sensors

Reliable

• The construction and design minimise both motion and ambient light interferences

• Clinical environment

• Rescue service and emergency medicine

• Sleep screening

The SoftCap® Sensors are suitable for the following applications:

The SoftCap® Sensors from the Rubberboot® series are the 3rd generation of soft sensors utilising the latest production technologies, materials and design elements.

The new Thermo-Q optosets from bluepoint® MEDICAL have a thermo-balanced light radiation characteristic with high light efficiency which significantly improves signal to noise ratio.

Flexible, robust and hygienic

• Home care

• Long-term monitoring

• Stress testing

11/2010 Rev.-Nr. 2020210004

All SoftCap® Sensors are classified and certified as class IIb products.

SoftCap® is a registered trademark of bluepoint ® MEDICAL.

For information about specific products, please visit

www.bluepoint-medical.com

bluepoint M E D I C A L

The clinically tested and validated oximetry sensors from bluepoint® MEDICAL

are fully compatible replacement sensors intended for use with most brands

of pulse oximeters and modules.

bluepoint® MEDICAL sales partner