SMI Coated Products Private Limited® Tel.: 0091-22- 42048000 Fax.: 0091-22- 28523897 Website:- www.smicoatedproducts.com

Product Specification Sheet

Kindly Note:- Version 1.1 June 2014 The Shelf Life of the product is two years when stored at 22° C. ± 5° C RH 50 % The above Critical functional test values of the label stock material have been conducted at SMI Quality Control Laboratory. Disclaimer:- Since the conditions of use and working methods adopted by the clients / converters are beyond our control, It is recommended that users satisfy themselves to the actual performance of the label stock under their respective application condition.

Curved Dia

Glass HDPE LDPE PP PET Corrugated Flexible Packaging

PVC UV Varnish

Flat  &  ≥ 35 mm  

Substrate:-

SMI 4400 Y is used to manufacture quality self adhesive labels for industries such as

Face:- A  matt  white  opaque  synthetic  paper  material  exhibiting  good  printability  and  conversion  on  Flexography,  Letterpress,  Rotogravure,  Offset,  Thermal  Transfer,  Screen,  Cold  &  Hot  Foil  printing.    Weight:- 66 gsm± 10 % Caliper:- 80 Microns ± 10 %

Release Liner:- A Glassine Paper featuring high internal strength, toughness & tear resistance coated with addition cured (platinum catalysed) solvent less silicone system giving excellent & smooth release required for automatic label dispensing. Weight:- 60 gsm ± 10 % Caliper:- 52 Microns ± 10 %

Adhesive:- Complies with US FDA regulations Chapter 21 para 175.105. A specially formulated clear permanent pure acrylic adhesive featuring standard initial tack and bond strength to a wide range of substrates even at extreme high temperatures . Adhesive Coat Weight :- 20 gsm ± 10 % Min  Application  Temp:-­‐    4°  C  

SMI 4400 Y

Consumer Liquor Cosmetics Barcode

✓ ✓ ✓ ✓ ✓ ✓ ✗ ✗ ✗

LABEL STOCK Weight:- 146 gsm ± 10 % Caliper :- 145 Microns ± 10 % Die Cutting and Matrix Removal Properties:-

Peel Adhesion Value on Steel at 180°Angle:- More than 1300g/square inch

Roll Ball:- Maximum 20mm

Release Value at 180°Angle:- Maximum 20g/ square inch

Shear Value:- Minimum 2000 minutes with 500 grams of suspended weight.