Smart WiFi Battery Camera Quick User Guide

1. Packing list

A1 Packing list: A3 Packing list:

1pcs battery Camera, 1pcs bracket, 1pcs screw sets,1pcs power adapter and USB cable; 1pcs User Guide

2. Product Details

No. Camera key Operation1 Power Key Press and hold for 5 seconds, it will power on/power off2 Power Key Press 1 second, it will wake up the camera3 Reset Key Press and hold for 5 seconds, it will restart

3. Set up Camera

3.1 Power on the camera

Press the power key, as beside picture shown andand hold on for 5 seconds, it will power on

* NOTE: Note: The camera battery is not fully charged when it leaves the factory for safe delivery.If it can not power on, please plug in DC5V 1A USB power adapter to do charge.If 100% no power, it will take about 5 hours to charge full.

Important NoteWi-Fi battery camera is not designed for 24/7 full capacity running or around-the clock livestreaming. It is designed to record upon motion events triggered by PIR sensor.

3.2 Plug in Power or TF Card

Plug in camera by DC5V 1A USBPower adapter when needed,and insert the TF Card, asbeside picture shown:

* NOTE: TF card max support 128GBRecommended sanDisk brand Class 10

3.3 Smart phone Wi-Fi ConnectionBring the camera and phone within 1 to 3 feet (30 to 100 centimeters) of the router.

Note: Make sure smart phone is connected with your wireless router.Please note our camera only works under 2.4G Wi-Fi, it doesn't support 5G Wi-Fi.

4. Install Cloudedge APP

4.1 Search “Cloudedge”in app store or google play, or scan below QR Code todownload and install on smart phone.

4.2 Register Account：Launch the app from your smart phone and click the “SIGN UP” button. Follow the on-screeninstructions to register one account and login

5. Add Camera

Click and select “BATTERY CAMERA”, as shown below, there are two ways to add camera:

QR Code Scan Mode and AP Configuration Mode

* NOTE: If you select other camera type, you can not add battery camera.

5.1 QR Code Scan Mode

5.1.1 Input the WiFI SSID name and password5.1.2 Follow the on screen instruction, put the QR code in front the camera lens 15cm.

5.2 AP Configuration modeFollow the on screen instruction, as below picture shown:

If the scan is successful, the device will have“bugu” sound prompt. Please click “Next”. Ifyou fail, please go back to the next step andstart again.

For Android phone, just follow the “NEXT”, and “CONNECT” to add camera.For iPhone, added one more step, manually open the settings and select “STRN_XXXXXXXX” WiFito do WiFi configuration work.

5.3 View Help when unable to connectWhen add camera in QR Code or AP mode, If problems or failed connection, please view help asbelow pictures shown:

No. LED Status Camera Status1 Slow blinking Red Awaiting WiFi Connection2 Fast blinking Red WiFi Connecting3 Solid on Red Network is abnormal4 Solid on Blue WiFi ConnectedNo. Description Solution and operation1 Unable to connect 1) Check your WiFi name and password

2) Ensure your WiFi is 2.4G, not support 5G3) Ensure your camera and phone close to router

2 Reset 1) Press and hold the reset button for 5 seconds2) Hear one “bugu” sound3) Red light turns to slow blinking

3 Change to a new network 1) Press reset key to factory default setting2) Re-connection

6. Device Menu

1. Add camera 12. Video Flip option2. Camera type icon 13. Share option3. Camera Name 14. Record button4. Alarm Message icon, red dot means alarmhappened

15. Snapshot button

5. Live View button 16. Speaker button, hold it then can speak6. Preview option 17. Microphone button7. Camera Time 18. Playback option8. Battery Volume 19. Recorded Alarm Video, click it to playback9. Bit Rate 20. Play button10. Network Signal Strength 21. Calendar option, click it to select date11. Body Detection option, green color meansenabled

7. Adjust the Detecting Distance of the PIR Sensor

The default sensitivity of the PIR sensor is at “Mid” and the detecting distance is 6 meters (20ft).If you want to adjust the sensitivity, please launch your App, and then click “Device Settings” ->"Body Detection"

7.1 To reduce false alarms, please note that: Do not install the camera facing any objects with bright lights, including sunshine, bright

lamp lights, etc. Do not place the camera too close to a place where there frequently moving vehicles. Based

on numerous tests, the recommended distance between the camera and vehicle is 15meters (55ft).

Stay away from the outlets, including air conditioner vents, humidifier outlets, the heattransfer vents of the projectors, etc.

Do not install the camera facing the mirror Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers

and phones, in order to avoid wireless interference.

SensitivityDetecting Distance

(For movingand living things)

Low Up to 4 meters (13ft)

Medium Up to 6 meters (20ft)

High Up to 8 meters (26ft)

*NOTE: Higher sensitivity offers longerdetecting distance, but it would lead tomore false alarms. You are advised to setup the sensitivity level to “Low” or“Medium” when you install the cameraoutdoors.

Important Notes for Reducing False Alarms

7.2 Cover the Monitoring AreaWhen installing the camera, it’s not suggested to make the PIR sensor vertically face the movingobject, otherwise it may not detect the motion events. It is suggested to make the angularbetween PIR sensor and detected object larger than 10 degree.

FYI:The PIR sensor’s detecting distance: 20ft (in default)The PIR sensor’s detecting angle: 120° (H)

8. Camera Installation

8.1. Table Mount8.2 Wall Mount: Fix the iron ball bracket to the wall with screws, and then magnetize the camerato the iron ball. Installation is very convenient and also easy to adjust the angle