TitanLarge scale heat pump and energy centres

refe

renc

e: b

ack

®

Do you need to heat or cool production or of-fice premises? Or are you looking for an envi-ronmentally friendly heating solution for a re-sidential complex or a district heating system? Or do you require an efficient solution for the production of process heat? Then the Titan heat pump is the right unit for you as it enables you to reduce operating costs while protecting our climate and natural resources. The high-per-formance large scale heat pumps of the Titan series combine advanced technology with un-rivalled energy efficiency. Our tried and tested series products and custom-engineered energy centres (Titan Z) come with numerous options and accessories and thus cater for a wide range of applications. The payback period of a Smart-Heat Titan is normally between 3 and 8 years.

Energy efficiency for large scale projects

Titan – available as series models up to 380 kW, com-plete with sleek sound-insulated housing

Titan large scale heat pumps are not only sui-table for geothermal groundwater heating sys-tems, but also provide an efficient solution for installations exploiting other renewable ener-gy sources such as sunlight (solar collectors and heat collector fences), waste water, industrial process water, exhaust air and waste heat. Titan heat pumps therefore enable you and your cus-tomers to tap into the most effective heat sour-ce available on site.

> Large scale heat pumps » TitanThe Titan large scale heat pumps are available as serial products in two versions: as brine/water heat pumps (up to 270 kW) and as water/water heat pumps (up to 380 kW). The heat pumps of these two versions are compact units equipped with an elegant sound-insulated housing. Efficient scroll com-pressors in tandem design guarantee excel-lent operating values at many critical process points. Units from 190 kW are equipped with modern, step-controlled screw compressors that allow for maximum efficiency even under partial load.

> Custom-engineered units For higher outputs, heat pumps (including cas-cade models) must be custom-designed based on the project specifications in order to ensure energy-efficient as well as cost-effective ope-ration. Our tailor-made Titan large scale heat pumps allow for optimised efficiency at rated outputs of up to 2,500 kW. The ratings and pro-perties of the built-in components can thereby be specified by the operator.

> Energy centre in compact design » Titan ZThe Titan Z energy centre combines advanced technology with outstanding efficiency.By customising the heat pump technology to suit the actual projects and by integrating energy-optimised hydraulic components such as circulating pumps and heat exchanger for separate systems, we are in a position to im-plement heat pump units of unrivalled effici-ency. As the operating expenses of these cen-tres are minimised, they pay for themselves within a very short time. We preassemble hy-draulic components to reduce the installation work on site and to avoid potential interface problems. This approach further enhances the operational safety of our units.

2

Titan und Titan ZLarge scale heat pumps and energy centres

Inverter-based heat pump technology – uni-versal systems that can be optimised to suit any project. We design and produce units that best suit your needs.

The new Titan BWi/WWi covers the entire out-put range from around 8 to 65 kW – with a sin-gle heat pump operated with a modulating in-verter. The inverter allows for continuous speed adjustment, based on the actual heating or cooling requirements, making the heat pump one of the most energy-efficient and durable units in the market with unrivalled annual COP figures. Two separate circuits with compres-sors make our systems not only highly reliable but also enable operators to adjust the perfor-mance to the actual heat demand. All compo-nents of the cooling circuits are electronically controlled. With the Titan BWi and WWi, opera-tors thus gain a technological advantage.

Featuring a compact design and low-noise op-eration, the Titan i provides flow temperatures of up to 60 °C and comes with a cooling option in reverse mode.Planners and architects benefit from planning

Titan i with inverter technology

Titan 050 BWi with 500l water tank

safety, as the system can be scaled to suit the project – from multi-generation homes, small business premises, and office blocks to child-care centres, warehouses and similar buildings. When it comes to the Titan i, there are virtu-ally no limits.

» Latest inverter technology » Easy power control for optimised operation » COP > 6 » Smart grid ready » Numerous controller options and bus

interfaces for easy integration into building management systems

» SmartHeat multi intelligent control (smic) - system

3

> Greater comfort thanks to enhanced func-tionalityThe Titan large scale heat pumps can be oper-ated in several different modes:

» Heating » Warm and hot water preparation » Active cooling » Passive cooling / Natural cooling » Dual mode: simultaneous heating and cool-

ing (only with Titan Z)

Titan large scale heat pumps thus cover all heating and cooling needs in a building.

> More control thanks to optimised regulationThe Titan units come with a weather-based multi-function control system and many ad-vanced technical features (smic system) as standard. It can be equipped with an optional bus card for the exchange of data with a cen-tral building management system. The op-tional web card allows for remote monitor-ing through user-friendly software by the unit operator, the service contractor or an external customer service provider.

Depending on the configuration, the smic - system offers the following functionalities (excerpt):

» Regulation and monitoring of cooling circuit

» Control of feed and return flow based on outside temperature

» Separate heating and cooling characteris-tics

» Demand-controlled multi-stage output adjustment

» Daily and weekly output programming » Temperature monitoring » Automatic actuation of efficiency pumps » Operating hours counter » Automatic actuation of other heat genera-

tors » Electronic soft-start control or start-up load

reduction » Communication modules: bus card, web

card

Send us your project requirements and details. We would be delighted to advise you on the best options for your building!

Titan large scale heat pump

Technical equipment - standard model

- Brine/water or water/water - Compact design with sound-insulated housing

- Evaporator and condenser as high-quality stainless steel plate heat exchangers

- Compressor: up to 170 kW designed as a hermitically sealed scroll compressor, from 190 kW designed as a high-efficiency com-pact screw compressor

- Integrated guards and safety devices - SmartHeat multi intelligent control (smic) - system

- Maximum flow temperature 55 °C

Titan – available as series models complete with elegant sound-insulated housing

Titan Z – (here: Titan Z 630 WW HT)

System technology at highest technical level Economical, ecological, tailor-made

» Option HTfor max. flow temperature up to 65°C

» Option Rfor reverse operation (active cooling) at minimum cooling temperature of 7 °C; cooling mode control

» Option HG-WTwith additional hot gas heat exchanger

Technical equipment - options

4

Energiezentrale Titan Z

> Enhanced economy by using optimum heat sourcesApart from the system’s efficiency, the cost-effectiveness of a heat pump is mainly deter-mined by the initial investment. A critical cost factor is thereby the installation required to tap into the geothermal heat source. By us-ing alternative heat sources or combining two or more energy sources, it is possible to sig-nificantly lower the capital expenditure for a heat pump system. In many cases, costs can be greatly reduced and COP values can be in-creased by using heat contained in process or waste water, solar energy or energy from hy-brid systems combining solar panels and geo-thermal probes! Titan Z large scale heat pumps are optimised for the use of many different al-ternative energy sources.

> Greater efficiency thanks to optimisationIn the design and production of our custom-engineered Titan Z large scale heat pumps, we individually adjust the performance profile of the various components to meet your specific requirements. With this approach, we are ab-le to offer you optimised energy efficiency for your project with the best achievable COP.

> Improved safety thanks to unrivalled qualityAll our units are made from top-quality com-ponents. Thanks to more than twenty years of experience in the development and produc-tion of heat pumps, and the use of top-quality components, we can guarantee you a long ser-vice life of our units. Each assembly is indivi-dually tested under real load conditions. As all key components such as the circulating pumps and the separating systems are pre-installed, the Titan Z offers maximum operational safe-ty. Every unit is tested on our own test bench under all key operating conditions.

> Titan Z – equipment optionsThe following optional components are availa-ble as fully integrated parts

» Circulating pumps for primary circuit, heat circuit or hot water circuit

» Separating heat exchangers, screw-moun-ted

» Heat exchanger for passive cooling » Switch-over valves, flow sensors » Pressure gauges, temperature sensors, etc. » Complete piping and insulation » Dual mode module

The SmartHeat multi intelligent control (smic) system is individually configured and thus ca-ters for multi-stage performance control, etc.

Technical equipment - standard model

- Brine/water or water/water - Compact design with sound-insulating housing or no housing

- Evaporator and condenser as high-quality stainless steel plate heat exchangers

- Compressors: hermetically sealed scroll compressors, high-efficiency compact screw compressors or reciprocating compressors

- Integrated guards and safety devices - SmartHeat multi intelligent control (smic) - system

- Maximum flow temperature 55 °C

Titan Z energy centre– (here: Titan Z 100 WW HT)

» Option HTmax. flow temperature up to 80°C

» Option R (same as Titan) » Option HG-WT

with additional hot gas heat exchanger » Option WTa/ WTb

with(a) tube bundle evaporator/condenser or(b) welded stainless steel heat exchanger

Technical equipment - options

5

Indoor swimming pool, Juist IslandType: Water/waterHeat source: Solar absorberOutput: 198 kW heating of swimming pool

Fire and rescue service centre, DresdenType: Water/waterHeat source: Waste water (channel-type heat exchanger)Output: 180 kW heating and cooling

Sonnenberg district heating system for apartment blocks, LudwigsburgType: Brine/waterHeat source: Geothermal heat/airOutput: 200 kW heating

Office building of Güstrow municipal servicesType: Brine/waterHeat source: Waste water (heat exchanger incollection basin)Output: 40 kW heating

Office building of Flamm AG, AachenType: Water/waterHeat source: Process heatOutput: 230 kW heating

Metal processing plant, Neustadt/WiedType: Water/waterHeat source: Cooling water of automatic laser cutting machinesOutput: 330 kW heating; 240 kW cooling

School building, Brühl, Germany Type: Brine/water, reversibleHeat source: Geothermal probe fieldOutput: 115 kW heating and cooling

> Cutting-edge solutions based on experienceWe have more than 20 years of experience in the development and production of heat pumps. To date, SmartHeat has installed mo-re than 10,000 and has been a main partner in many large scale projects across Europe and beyond. We therefore have the expertise re-quired for the implementation of innovative heat pump solutions in your projects. Our pro-ducts and services are second to none.

> Heating and cooling solutions from renewa-ble energy sources for any application – made in Germany

» Semi-detached homes and apartment blocks

» Public buildings: libraries, schools, kinder-gartens, hospitals

» Office buildings » Production halls and commercial premises » Swimming pools

» District heating systems » Youth hostels » Food processing industry » Manufacturing industry » Sports stadiums and arenas » Sludge drying plants » Chemical industry

„Municipalities for climate protection”

project with Titan large scale heat pump

winner of bwp (German Federal Heat

Pump Association) award

6

Institute of Aviation Medicine, KönigsbrückType: Brine/waterHeat source: Geothermal probes and solar energyOutput: 2 x 126 kW heating

University library, RostockType: Brine/water, reversibleHeat source: Geothermal probe fieldOutput: 80 kW heating, 130 kW cooling

Sewage treatment plant, RudersbergType: Water/waterHeat source: Waste waterOutput: 144 kW sludge drying

Metal processing plant, Neustadt/WiedType: Water/waterHeat source: Cooling water of automatic laser cutting machinesOutput: 330 kW heating; 240 kW cooling

Applications and selectedreference projectsCompetence in all areas

Apartment block, NeuruppinType: Brine/waterHeat source: Exhaust airOutput: 60 kW grey water

Operating building, Novogor district heating system, Perm, RussiaType: Brine/waterHeat source: Waste waterOutput: 650 kW heating

Greenhouses near Antalya Mitas Dogal, TurkeyType: Water/water, reversibleHeat source: Hybrid system (geothermalheat, ground water, solar energy)Output: 1st project: 80 kW heating and cooling2nd project: 2 x 620 kW heating, 580 kW cooling

> Titan large scale heat pumpsThe Titan / Titan Z large scale heat pumps are designed, manufactured and tested at our plant in Güstrow, Germany. Most components are sourced from European manufacturers.

> Advantages at a glance » Well-engineered series products and

custom-engineered energy centres » Know-how based on many years of experi-

ence » Up to 2,500 kW heating power » Optional cooling operation as well as many

other equipment options » Flow temperatures up to 80°C » SmartHeat multi intelligent control system

» Easy integration into existing building management systems

» Factory-tested » Available in customised sizes, based on

actual requirements » smart grid - ready » Web-based remote maintenance and

control

more than 1 MW

7

> Our services:

» Advice in the design and dimensioning of the most suitable heat source system

» Calculation of heat pump COP based on project-specific operating conditions, for the subsequent calculation of profitability

» Project-based adjustment of heat pump system performance for optimum efficiency and profitability

» Recommendation of competent specialist contractors (drilling companies, installation firms, planning engineers)

» Production of customised heat pumps

» Project-specific configuration of parameters in SmartHeat multi intelligent control (smic) system

All information in this document is subject to change without prior notice.Errors excepted.Printed on FSC-certified paper, made from 100% recycled fibres.Our contribution to the protection of the environment.2013 © SmartHeat

SmartHeat Deutschland GmbHAm Augraben 10D-18273 Güstrow, GERMANYTel. +49 3843 / 22 79 -0Fax +49 3843 / 68 31 32info@smartheat.dewww.smartheat.de

» High-efficiency technology developed in-house

» Tested products » Test bench for large scale heat pumps » Many years of experience » Safety thanks to high quality and in-

novation » Use of branded third-party components » Competent advice » Fast order handling with strict adher-

ence to deadlines » Member of the Industrial Advisory Board

of the German Federal Heat Pump As-sociation bwp

Cutting-edge solutions based on expertise

> Application examples:

Cover page:Kurt Ritter sports and family leisure centre, Berlin Type: Water/waterHeat source: Waste waterOutput: 60 kW heating

Titan und Titan ZLarge scale heat pump and energy centres

klimaneutralnatureOffice.com | DE-324-552949

gedruckt