smarter, greener, and more connected - ti. · pdf file• low power mesh network •...
TRANSCRIPT
1
Smarter, Greener, and More Connected
Wayne Huang ([email protected])Technical support of Microcontrollers and Wireless Connectivity for Delta GroupJesse WangTechnical support of Wireless ConnectivityAugust, 2015
Agenda• MSP432 – low power and high performance• Wireless connectivity
2
3
MSP432 – Best Optimization between Performance and Low Power
Developers are challenged to pack
more performance into
devices
INDUSTRY DILEMMA: DESIGNING PRODUCTS WITH MORE FEATURES AND LESS POWER
4
TI Information – Selective Disclosure
MORE PERFORMANCE FOR MSP430™ DEVELOPERS
LOWER POWER FOR ARM® DEVELOPERS
NO COMPROMISES
Advance to higher levels of computing and analog performance, while maximizing your ultra-low-power MSP430 MCU investment and expertise
Slash power consumption and boost performance with the world’s lowest power Cortex®-M4F microcontroller
INTRODUCING MSP432™ MCUs: LOW-POWER AT ITS BEST; PERFORMANCE AT ITS CORE
5
Get low-power and performance with a scalable portfolio of 16-bit and 32-bit MSP microcontrollers in a variety of applications
TI Information – Selective Disclosure
MSP432™ MCUs: PERFORMANCE AT ITS CORE
Selecting the high-performance ARM®
Cortex®-M4F core
Highest Coremark score: 3.41/MHz
Incorporating high-performance peripherals and features• Simultaneously read
and erase from flash
• Execute up to 200% faster with DriverLibin ROM vs. Flash
• 14-bit 1MSPS ADC with 13.2ENOB, differential mode & 2 window comparators
48MHz ARM®
Cortex®-M4F• Full ARM
instruction set • DSP extensions• FPU engine
Industry-leading ultra-low-power• Active power:
95 μA per MHz• Sleep mode:
850 nA (with RTC)• ULPBench score:
167.4
DriverLib in-ROM
14-bit ADC
8-channel DMA
NVIC with tail-chaining
Peripheral & SRAM memory bit-band
Independent flash banks
Selectable RAM retention
Integrated LDO & DC/DC
128-bit Flash buffer& pre-fetch
6
MSP432 MCU Wide voltage range: 1.62-3.7V
TI Information – Selective Disclosure
MSP432™ MCUs: LOW-POWER AT ITS BEST
Optimizing the architecture for ultra-low power
Industry’s lowest power ARM
Cortex-M4F MCU
48MHz ARM®
Cortex®-M4F• Full ARM
instruction set • DSP extensions• FPU engine
Industry-leading ultra-low-power• Active power:
95 μA per MHz• Sleep mode:
850 nA (with RTC)• ULPBench score:
167.4
Driver Lib in-ROM
128-bit Flash buffer& pre-fetch
14-bit ADC
8 channel DMA
NVIC with tail-chaining
Peripheral & SRAM memory bit-band
Independent flash banks
Selectable RAM retention
Integrated LDO & DC/DC
MSP432 MCU
7
Optimizing peripherals for ultra-low power• Save 40% more
power with the integrated DC/DC vs. LDO
• Save 30nA per RAM bank with selectable RAM retention
• Consume minimal power (375uA) when sampling sensors at 1MSPS with 14-bit ADC
• DriverLib in ROM consumes up to 35% less power than Flash
Wide voltage range: 1.62-3.7V
TI Information – Selective Disclosure
MSP432™ MCUs: INDUSTRY’S LOWEST POWER ARM® CORTEX®-M4F
EEMBC’s ULPBench provides a true comparison of microcontroller current consumption and efficiency.
8
0
40
80
120
160 ULPBench Scores
See for yourself: www.eembc.org/ulpbench
MSP432 MCUs:
35% betterscore than closest Cortex-M4F competitor.167.4
8068.7 72
143.6
119 123.5
MSP MCUs:
Industry’s lowest power 16-bit MCUs and 32-bit Cortex-M4F MCUs.
TI Information – Selective Disclosure
TI’S INDUSTRY-LEADING LOW-POWER MCU PORTFOLIO: SCALABILITY FROM 16-BIT TO 32-BIT, PLUS WIRELESS MCUs
9
16-bit MSP430 MCUs• The industry leader in ultra-
low-power, rich peripherals and analog integration.
• World’s only portfolio of ultra-low-power embedded FRAM MCUs.
• Growing portfolio of more than 500 ultra-low-power MCUs across 13,000+ customers.
32-bit MSP432 MCUs• Industry’s lowest power
ARM® Cortex®-M4F MCUs. Period.
• High performance MCUs without sacrificing power consumption.
• Pin-for-pin platform scalability up to 2MB; sampling 256KB today.
SimpleLink Wireless MCUs• Focus on ease of use and
low power.• Support for more than 14
Bluetooth Smart, Sub-1 GHz, 6LoWPAN, ZigBee and more.
• Portfolio includes SimpleLinkWi-Fi and new ultra-low power platform.
MSP430™
MCUsMSP432™
MCUsSimpleLink™
Wireless MCUs
MSP432™ MICROCONTROLLERS
10
Software
Differentiation
• MSPWare – leverage C-code portable MSP430 peripherals and analog
• RTOS Support - TI-RTOS, FreeRTOS, Micrium
• ARM 3rd Party Ecosystem
• IDEs - Code Composer Studio™, IAR, KEIL and gcc
Packages
LaunchPad• MSP-EXP432P401R• $12.99Target Board• MSP-TS432PZ100• $89.00
5x5mm²
9x9mm²
16x16mm²
• Industry’s lowest power ARM® Cortex®-M4F MCU ─ Best ULPBench score of 167.4. As low as 850nA Standby, 95µA/MHz Active; Deep sleep to Active: <10us typ
• Wide supply range ─ 1.62-3.7V, including flash operation,enabling multiple battery technologies and eliminating external regulation
• Integrated high-performance and low-power analog ─ Including 1MSPS 14-bit ADC, 375uA at 1MSPS
• Secure MCU environment – Flash IP protection & integrated AES-256 encryption
• Simplified portability from MSP430 - Leverage software & know-how from existing MSP430 designs
Using 430 Peripherals, Analog & Low Power Modes
Tools
Status• LaunchPad and Target Board available• Sampling 256KB (XMS432P401RIPZR)• Pin-for-pin roadmap to 2MB
Temperature 85°C
Up to 256 KB FlashUp to 64 KB SRAM
Bootstrap Loader
4× I2C or SPI
Real-time JTAG
4× UART or SPI
4× 16-bit Timer/PWM/CCP2× 32-bit GP Timers
Watchdog Timer
24ch, 14-bit 1 MSPS SAR ADC
Voltage Reference2× Analog Comparators
Capacitive Touch I/O
Real-Time ClockDMA (8 ch)
AES-256
CRC32
Temperature Sensor
AnalogComms PeripheralsSecurity
Systick Timer
Driver Libraries
Debug
System Modules
MemoryProgrammable DCO
Low-Power OSC
NVIC SWD
ARM®
Cortex™-M4F48 MHz
WIC ITMFPU MPU
Power & Clocking
32KB ROM
1.62V – 3.7V Operation
Same as MSP430
MSP432P4x
MSP PLATFORM PORTABILITYM
SP43
0M
SP43
2
MSP430 Modules
MSP 16-bit core
430
MSPWareRegister-
LevelDriverLibrary430
MSP Debugger
LaunchPad
BoosterPacks
Target Board
BSL
ULP Tools: ULP Advisor & EnergyTrace
IAR IDEEnergia
CCS IDE
GCC
CMSIS
ARM Modules
New MSP432 Modules
ARM M4F 32-bit core
432
ARM
432
ARM KeilULP Tools: ULP Advisor
& EnergyTrace+
Intrinsics & InterruptsNew for MSP432Same as MSP430
Slight modifications from MSP430
430 430
MSPWareRegister-
LevelDriverLibrary
Libraries
Libraries
Intrinsics & Interrupts
RTOSs
Hardware Software Development Tools Development Kits
ENERGYTRACE+™ TECHNOLOGY
• Provides a complete ecosystem for real-time power debugging and quickens time to market. Spends less time debugging and more time developing.
• Graphical User Interface in TI’s Code Composer Studio integrated development environment (IDE) and IAR Systems’ Embedded provides energy profiles of your application
– Current measurement and CPU states can be tracked over time to help identify power black holes
12
IT’S ALL IN MSPWARE
13
Your one-stop shop for all technical collateral
• User’s Guides• Application Notes• Deep-dive Training• Code Examples
www.ti.com/tool/mspwarewww.dev.ti.com
WHY MSP432 MCUs?Intelligent, fast sensing• Motion sensing, proximity,
fingerprint scan• Signature analysis • Fast processing from
multiple serial interfaces
Touch capability• High-performance, low-power
analog enables touch capability
Large amount of flash• Runs a large variety of wireless
connectivity stacks
Ultra-low power • Keeps system power low while
collecting / processing sensor data
IP (code) Protection• Preserves and secures customer’s
unique code and algorithms
MSP432™ MCUs: OPTIMIZED FOR INDUSTRIAL
Customers want to increase product capability with more
sensors, and display data in real time, without sacrificing
the portability enabled by ultra-low-power operation
14
INDUSTRIAL SECURITY PANEL
INDUSTRIAL | PERSONAL ELECTRONICS | INTERNET OF THINGS
QVGA Display
ADC14 for touch capability
SPI
ADC14Microphone
Glass Breakage Sensor
Signal Conditioning ADC14
Temp Sensor
(TMP006/7)
I2C
ADC14
Wi-Fi(CC3100)
SpeakerPWM
Signal Conditioning
MSP432MCUs
Intelligent, fast sensing• Motion sensing, proximity,
fingerprint scan• Signature analysis • Fast processing from
multiple serial interfaces
Touch capability• High-performance, low-power
analog enables touch capability
Large amount of flash• Runs a large variety of wireless
connectivity stacks
Ultra-low power • Keeps system power low while
collecting / processing sensor data
IP (code) Protection• Preserves and secures customer’s
unique code and algorithms
MSP432™ MCUs: OPTIMIZED FOR INDUSTRIAL
15
..
Motion Sensor
WHY MSP432 MCUs?
INDUSTRIAL SECURITY PANEL
INDUSTRIAL | PERSONAL ELECTRONICS | INTERNET OF THINGS
MSP432 DEVICE OPTIONS
16
Part Number Flash
(KB)
SRAM(KB)
ADC14Chan
Comp-0 Chan
Comp-1 Chan
TimerA
eUSCI 20mADrive I/O
TotalI/O
Package TypeChan A:
UART/IrDA/SPI
Chan B: SPI/I2C
MSP432P401RIPZ* 256 64 24/ext2/int
8 8 5,5,5,5 4 4 4 84 100 LQFP16x16mm
MSP432P401MIPZ 128 32 24/ext2/int
8 8 5,5,5,5 4 4 4 84 100 LQFP16x16mm
MSP432P401RIZXH 256 64 16/ext2/int
6 8 5,5,5 3 4 4 64 80 BGA5x5mm
MSP432P401MIZXH 128 32 16/ext2/int
6 8 5,5,5 3 4 4 64 80 BGA5x5mm
MSP432P401RIRGC 256 64 12/ext2/int
2 4 5,5,5 3 3 4 48 64 QFN9x9mm
MSP432P401MIRGC 128 32 12/ext2/int
2 4 5,5,5 3 3 4 48 64 QFN9x9mm
* XMS432P401RIPZR sampling today
MSP432™ MCUs: LOW-POWER AT ITS BEST; PERFORMANCE AT ITS CORE
GROWING 16- AND 32-BIT PORTFOLIOS, INCLUDING ULTRA-LOW POWER FRAM MCUs
GET STARTED WITH MSP432 MCU DEVELOPMENT TODAY
17
MSP MCUs: INDUSTRY'S LOWEST POWER MICROCONTROLLERS
MCU
MCU
MCU
18
TI Internet of Things
What is the IoT ?
19
How is IoT different than M2M?• M2M focused on connecting
machines – mainly proprietary closed systems
• IoT is about harmonizing the way humans and machines connect using common public services PeopleThings
Cloud ServicesThings, people and cloud services getting connected via the Internet to enable new use cases and business models
What is driving the IoT ?
20
Users• Streamline experiences• Increase convenience• Better lifestyle• Reduce expenses
Businesses• Sell more products• Sell new services• Reduce expenses• With lower barriers
Why now ?
21
• More products are adding intelligence with MCUs to support more sophisticated control
• Adding connectivity is getting easier & cheaper • Low-power semiconductors allow for more battery-powered
applications• Wi-Fi and Internet access broadly available• Tablets, PCs and Smartphones broadly available – can be
leveraged as a gateway• Connectivity brings control, sensing & ability to update system
software over the internet
We are at the IoT inflection point
IoT is an enabling technology – not a market
22
Health Care• Remote monitoring• Ambulance telemetry• Drugs tracking• Hospital asset
tracking• Access control• Predictive
maintenance
Smart Manufacturing• Flow optimization• Real-time inventory• Asset tracking• Employee safety• Predictive maintenance• Firmware
updates
Automotive• Infotainment• Wire replacement• Telemetry• Predictive maintenance• C2C and C2I
Smart Cities• Residential E-meters• Smart street lights• Pipeline leak detection• Traffic control• Surveillance cameras• Centralized and integrated
system control
Building & Home Automation• Access control• Light and temp control• Energy optimization• Predictive maintenance• Connected appliances
Wearables• Entertainment• Fitness• Smart watch• Location and tracking
23
IoT cloud
A typical IOT application
IoT node
Sensors & Actuators
IoT gateway(optional)
Router
Remote control
Monitor & Analytics
SenseSense StoreStore PresentPresent
AnalyzeAnalyzeDecideDecideControlControl
But there are challenges
24
Sensing a complex environment
Multiple connectivity options
Security is a must
Power is critical
The IoT is complex Connecting to the cloud
Sensing technology is a must C H A L L E N G E W H A T I S N E E D E D
Sensing a complex environment Innovative ways to sense and deliver information
T I D E L I V E R S
Biosensing
Chemical
Current / power
Light
Humidity
Gas
Material composition
Occupancy
Position / motion
Pressure
Proximity
Temperature
Sensing technologies that address a wide variety of applications
www.ti.com/sensing
No one connectivity standard will win in the IoTC H A L L E N G E W H A T I S N E E D E D
Connectivity: One size doesn’t fit all
Broad variety of wired or wireless standards
T I D E L I V E R S
• Low power mesh network• Smart metering & lighting• Moving into home automation
• Fast, low latency Ethernet• Real-time industrial control• Information technology
• Fast – 10Mbps++• Direct Internet connection• Home & enterprise apps
• Data over power lines (OFDM)• Developed for smart grid• Lighting, solar, appliances
• Lowest power BLE• Connect to tablet/phone• Moving to industrial, automotive
• Low power & long range• Native IP-based network• Home gateways and security
2.4GHz IEEE 802.15.4IEEE P1901.2
System-level approach to power is requiredC H A L L E N G E W H A T I S N E E D E D
Power is critical The lowest power solutions for any application
T I D E L I V E R S
Harvesting power and stretching battery life
Thermal RF Light Vibration
Days to years of battery operation or harvested-powered devices
Power management & precision analog ICs
Low-power microcontrollersMSP430™
MCUTiva™-C MCU
Low-power wireless connectivity
Wi-Fi Bluetooth ZigBee Sub-1 GHz
Wi-Fi-based sensors running on 2xAA batteries over 1 yearZigBee/6LoWPAN-based light switch running on coin cell battery for 10 years
Security is vital at all layersC H A L L E N G E W H A T I S N E E D E D
Security is a must Built-in hardware security technology
T I D E L I V E R S
Security solutions to prevent, detect and respond to unintended or malicious behavior
Protecting manufacturers’ and consumers’ devices, solutions and services
Hardware Connectivity Software
Symmetric cryptography
IP protection
Authentication & anti-cloning
Tamper protection
The IoT must be easyC H A L L E N G E W H A T I S N E E D E D
Complexity IoT solutions for everyone, not just experts
T I D E L I V E R S
Solutions that are making the IoT easy for system designers
Our customers getease of set up and use
TI and our Ecosystem
Encapsulated wireless connectivity:• Modules and reference designs eliminating
need for RF expertise• On-chip Internet connectivity SW stack and
comprehensive development environmentExample designs and all the building blocks
Make anything wireless in minutes
Making it Easier to Connect to the CloudC H A L L E N G E W H A T I S N E E D E D
Connecting end-to-end and enabling applications
Ecosystem of cloud partners to enable easy integration
T I D E L I V E R S
New open ecosystem of IoT cloud service providers
Faster time to market of new devices and services based on TI’s IoT silicon solutions. Meets individual needs of manufacturers.
Making the IoT happenChallenges What is needed
Connectivity: One size doesn’t fit all
Broad variety of wired or wireless standards
Power is critical The lowest power solutions for any application
Security is a must Built-in hardware security technology
Complexity IoT solutions for everyone, not just experts
Connecting to the cloud Ecosystem of cloud partners to enable seamless integration
Sensing is vital Innovative sensing technology
32
Texas Instruments Wireless ConnectivityWireless Connectivity Portfolio
ZigBeeRF4CEMesh
Up to 1Mbps
AAA battery
Up to 848Kbps
No battery to coin cell
• Low / no power• Diverse apps
Up to 3Mbps
Coin cell to AAA
• IOP• Large install base• In mobile devices
Up to 1Mbps
AAA battery
• IPv6 stack• Mesh• Ultra low power• IoT platform
Up to 100Mbps
AA battery
• Existing infrastructure
• High throughput
Up to 1Mbps
Coin cell
• Longest range• Customizable to application
• Robust RF
NFCRFID
Identification
Bluetooth®Bluetooth LE
Personal Connection
6LoWPANIP Mesh
Wi-Fi®Existing
Infrastructure
Proprietary Sub-1GHz
Customizable
Proximity Personal area networks Neighborhood area networksLocal area networks
RangeUp to 100mcm km
• Standardized mesh
• Large area coverage
• Redundancy
Up to 1Mbps
Coin cell
• Customizable to application
• Robust RF
Proprietary 2.4GHz
Customizable
Key Attributes
Key Differences
Range Throughput
Typical Topology
StarMesh P2P
Zigbee
Prop Sub 1Ghz, Prop 2.4Ghz
WiFi, Bluetooth
RF4CE
Mesh
Choosing The Right Technology for You
33
6LoWPAN
2.4GHzProprietary
6LoWPAN
RF4CE
ZigBee
WiFiTe
chno
logy
RFI
D
ANT
BLE
Bluetooth®
0-1m 10m 100m
Sub-1GHz
0.1M
50M
1M
3M
RFID
BLE/ANTZigBee, RF4CE
6LoWPANSub-1GHz
2.4GHz
WiFi
Bluetooth®
Technology
No
Bat
tery
Technology
Coi
n C
ell
AAA
RFID
BLE/ANTSub-1GHz
2.4GHzProprietary
Bluetooth®
ZigBeeRF4CE
6LoWPAN
WiFi
Typical power source
34
SimpleLink BLEBluetooth Smart
34
Single Mode – Bluetooth Smart (BLE)Low Power, Low Latency, Low Throughput
Products Features
• SimpleLinkTM Wireless MCU • Flash based wireless MCU• CC2540 (USB interface)• CC2541 (I2C interface)• CC2540T ( up to 125°C)• CC2640 (M3 + Sencor
Control)• Apps developer tools• Broad TI Designs portfolio
• Lowest Power down to 1/10th of BT Classic
• Run BT stack and application on one single chip down to 6x6mm QFN package
• Bluetooth 4.1 compatible
• Industrial and extended temp range: -40 to 85°C and 125°C
• Automotive qualification option
Value PropositionsLarge Tools and ref designs Ecosystem Easiest to design with: proven and robust BT 4.1 compatible
stack with over the air capability (100 Million devices shipped), RTOS and low cost tool
The lowest power: multi-year operation on smaller coin-cell The most Integrated: single chip wireless MCU, integrated
flash, small package Strong roadmap with more integration, lower power, Cortex MSensorTag
Applications
• Home & Building
• Health & Medical
• Remote
SimpleLink CC26xx/CC13xx Wireless MCUsUltra-low Power Consumption• 61 µA/MHz ARM Cortex M3• 8.2 µA/MHz Sensor Controller• 1 µA sleep with retention and RTC• 5.9 mA RX (single-ended)• 6.2 mA TX (single-ended)• <3uA while running 10 ADC samples/s
SoCKey Features• Autonomous sensor controller engine• 4x4, 5x5, and 7x7 mm QFN• 1.65-2.0V or 1.8 – 3.8 V supply range• 128 kB Flash + 8 kB Cache• 20 kB RAM
RF Key Features• +5/+14 dBm output power (2.4GHz/Sub1GHz)• -97/-120 dBm sensitivity (2.4GHz/Sub1GHz)• Supports 2.4GHz and 915/868/433 MHz• Pin compatible and SW compatible across
protocols and frequency bands
37
Small, Simple & Splendid for the IoT – SimpleLink™ SensorTag!
Beacon Example Tracking Location
38
• Use Beacon location App to evaluate Micro-Location technique
Beacon Example Retail Store• Consumer
– Special promotions– Personal messages– Recommendations– Automatic check-in
• Retailer– Monitoring shopping behavior– Advertisement– Simplify payment handling– Data collection
• Cloud service– Beacon management– Access information on user– Push segmented information– Security / Beacon validation
39
Cloud
40
SimpleLink WiFi
40
SimpleLink™ Wi-Fi® platformLowest power, programmable wireless MCU, easiest to use
Products Features Applications• CC3200 (Wireless MCU)
• Integrated ARM Cortex-M4 MCU + Wi-Fi network processor
• First programmable single chip Wi-Fi solution
• CC3100 (Internet-on-a-chip Wi-Fi network processor)• Embedded TCIP/IP stack • Connect any MCU to the
Internet of Things
• On-chip Internet & Wi-Fi security• Wireless MCU separate from
TCP/IP Stack, free for customer applications
• Flexible provisioning such as SmartConfig, WAC, & AP Mode
• Cloud supported• FCC/CE/ETSI certified modules• SDK for development with Code
Composer Studio and IAR support
• Internet of Things (IoT)
• Home automation & appliance
• Safety and security
• Smart energy
• Industrial M2M communication
• Wireless audio streaming
Value Propositions• The lowest power: Run for over a year on two AA batteries• First single chip programmable Wi-Fi solution: Add Wi-Fi to any
system• Easiest to design with: No Wi-Fi experience needed; HW designs, 50+
software examples, extensive documentation and TI E2E support forum all readily available
SimpleLink WiFi CC3100 & CC3200Smart Wi-Fi Network Processor & Wi-FI Wireless MCU
Inte
grat
ion
Inte
grat
ion
• industry’s first programmable Wi-Fi MCU
• 2.4/5GHz embedded Wi-Fi • Internet on a Chip• On Chip HW encryption (AES,
DES, SHA, DTHE CRC)• On chip ADC and MCU
peripherals• QFN package
Low
Pow
erLo
w P
ower
Low power radio• 33 mA listen, 53 mA receive• 4 uA hibernate• 85 uA sleep
Low power modes• Wi-Fi Sensors running on
2xAA Batteries over 1 year
No RF expertize required• 802.11a/b/g/n STA, AP, P2P• Embedded TCP/IP stack• Tiny device driver • Works with any MCU or no MCUFlexible, Fast, Secure Internet ConnectionTools, E2E, Modules, Wiki, ref designQ
uick
er ti
me
to m
arke
tQ
uick
er ti
me
to m
arke
t
Jarden First Alert Portfolio with CC3200
Wi-Fi Safe
Wi-Fi EnvironmentMonitor
Wi-Fi SmokeAlarm
Home Automation
44
Use case• A line of Wi-Fi and BLE connected home
automation products• Wi-Fi Smoke and CO Alarm• Wi-Fi Safe• Wi-Fi Environmnet Monitor
Use case• A line of Wi-Fi and BLE connected home
automation products• Wi-Fi Smoke and CO Alarm• Wi-Fi Safe• Wi-Fi Environmnet Monitor
Why we won• TI portfolio – support of both BLE and Wi-Fi
IOT-oriented solutions• Simple single chip solution with on-chip
customer-dedicated MCU• Low power leadership• Easy integration• CC3200 pre-integration with Arrayent cloud
service• Wi-Fi and internet security protocols, HW
encryption engine
Why we won• TI portfolio – support of both BLE and Wi-Fi
IOT-oriented solutions• Simple single chip solution with on-chip
customer-dedicated MCU• Low power leadership• Easy integration• CC3200 pre-integration with Arrayent cloud
service• Wi-Fi and internet security protocols, HW
encryption engine
Solution• CC3200MOD for cloud connectivity• CC2640 for local communication
Solution• CC3200MOD for cloud connectivity• CC2640 for local communication
ZigBeeLowest power, large secure mesh network, easiest to use
Products Features Applications• Wireless MCUs
• CC2530• CC2531 (with USB)• CC2538 (High performance,
large memory)• Range extender
• CC2592 (Extends range up to 7x)
• Z-Stack: Royalty-free and robust TI ZigBee stack
• Run Z-Stack and application on one single chip
• USB interface • Over-the-air software update
capability• Industrial temp range:
-40 to 125 C• Golden unit software as part of
the standard for ZigBee Home Automation and ZigBeeConnected Lighting
• Home automation• Comfort• Security• Energy efficiency
• Lighting networks• Lights• Switch/sensor
• Generic mesh• IP-to-ZigBee gateways
Value Propositions• The lowest power: Multi-year operation on small coin-cell
• Robust and standardized mesh network: Connect up to 100s of nodes in industrial setting
• Easiest to design with: Proven and robust ‘copy paste’ kits, reference designs together with Golden Unit software stack
WilinkTM Combo solutionshigh-performance WiFi + Bluetooth/Bluetooth Low Energy
Products Features Applications• WilinkTM 8 Combo
• WL18xx Combo• TI Modules
• WL1801MOD• WL1805MOD• WL1831MOD• WL1835MOD• WL1807MOD• WL1837MOD
• 3rd Parties modules
• Combo BT Dual Mode + WiFion one single-chip
• Performance over long range• Connect to processors(high
level OS) and MCUs running the stack
• Industrial temp -40 to 85 C• 2.4GHz and 5GHz support• Fully certified module (FCC, IC,
CE, Bluetooth)
• Security Camera• Portable Data Terminal • Gateways• Audio• Industrial Panel/ HMI• Professional Camera• Wearable
Value PropositionsTools/modules for easy development Performance and low power: 100Mbps with the lowest power
(800uA IDLE) Certified and easy to use: Pre-integrated, certified,
production ready solutions, software downloadable. Open documentation (Wiki), Forums (E2E), TI and 3rd party network
Integrated and scalable: single chip multi-combo with pin to pin compatible variants, consumer, industrial (85 degree C) and automotive grade (Q100)
Dual-mode Bluetooth (Classic + BLE)Bluetooth connection across any end point (BLE or classic); enables bridge between BLE and classic
PL Contact: Joy Taylor
Products Features Applications• Smart RF transceivers
• CC2560 (Classic only)• CC2564 (Classic + BLE)• Pin-to-pin compatible
• TI modules• CC2564MODN
• 3 Parties Modules• Audio TI Designs (sink and
source)
• Performance over long range (100m) with throughput up to 3Mbps
• Connect to any MCU or processor
• BT stack runs on external host • Bluetooth 2.1 +EDR/ BT 4.0• Fully certified module (FCC, IC,
CE, Bluetooth SIG)
• Embedded audio
• Heath andmedical care
• Mobile device accessories
• Toys
Value PropositionsTools/Modules/TI Designs
• Best Performance: reliable connection over a long range (100m) with optimized power consumption
• Flexible: connect to any host (MCU or processor)• Most proven solution: 300 millions devices shipped, robust
royalty free SW, solution available for broad market • FCC, IC, CE & Bluetooth SIG Fully Certified module
Sub-1 GHz Performance LineIndustrial 169/ 315/ 433/ 470/ 868/ 915/ 920 MHz solutions
Products Features Applications• Smart RF transceiver
• CC1120• Smart RF transceiver for 802.15.4.g
• CC1200• Smart RF transceiver for ultra
narrowband• CC1125
• Software stacks• Free SimpliciTI software stack• wM-Bus software
• High sensitivity & narrowband support, the de facto standard for long range communication
• Advanced wavematch receiver gives best selectivity and blocking including low power sniff mode
• Low-power RX sniff mode enable automatic duty-cycling of the receiver
• SmartRF software tools enable fast RF development and testing
• Wireless meter reading
• Alarm and security
• Home, building and industrial automation
Value Propositions
• Longest real-world range: 25km range, full-building to city-wide RF coverage, beyond 100km with amplifier
• Robust low-power communication: Less retransmissions of RF packets means less power consumption in the application
• Supports more standards: 6LoWPAN, 802.15.4g, WiSun, wM-Bus, ETSI Cat 1, FCC Part 90 and more
Sub-1 GHz Value Line315/ 433/ 470/ 868/ 915/ 920 MHz solutions for consumer applications
Products Features Applications• Smart RF transceiver
• CC110L• Wireless MCU
• CC1110• CC430
• Wireless MCU with USB• CC1111
• Free software examples• SimpliciTI software stack
• Complete solutions for 315, 433, 470, 868, 915 and 950 MHz
• SimpliciTI network protocol on CC11xx devices. Only 0.5kB RAM, 8kB Flash MCU needed. 5yr battery life on AA cells
• SmartRF Studio windows software enable fast RF development and testing
• Flexible RF packet sniffer helps debug RF solutions quicker
• Home and building automation
• Safety and security
• Consumer applications
Value Propositions• Robust RF range in your house: Longer range than 2.4 GHz. Stable
wireless links that go through walls• Most complete design support: 15 years of accumulated knowledge
documented on the web: 100+ app notes, dedicated E2E forum, SmartRF tools
• Most optimized Sub-1 GHz solutions: Tx, Rx, Trx, wireless MCU + small SW stack
6LoWPANIP cloud connection, largest network, longest range
Products Features Applications• Wireless MCUs
• CC2538 (high performance 2.4GHz)
• CC1200 (Sub-1 GHz long range)
• Range extender• CC2592 (2.4 GHz extends
up to 4x range)• Contiki software: Open source
solution
• Complete solution for both 2.4 GHz and Sub-1GHz
• An edge router connects the 6LoWPAN network to IP applications. No gateway needed
• Mesh routing that is robust and self-healing
• Can achieve multi-year operation on a coin-cell battery
• Internet of Things (IoT)
• Home and building automation
• Safety and security
• Low-power sensor networks
Value Propositions
• IP cloud connection: Complete solution from end nodes through edge router to the cloud
• Large and secure mesh network: Connect up to 1000s of nodes
• Longest range: Sub-1 GHz solution for city-wide networkNodes
Self‐healing mesh
RouterInternet
From idea to market, safe and quickly
TI has tools to discover your chosen technology and run
“Hello World”
Enabling your Alpha prototype with TI’s “Out-of-the-box”
tools and software solutions
We have module partners with pre-certified solutions
Extensive support infrastructure for hassle-
free development
IR temperatureHumidity
AccelerometerPressure
Magnetometer
Gyroscope
Broad range of reference designs
Getting Start
To learn more information about the industry’s broadest wireless portfolio, please see:
• Wireless Connectivity Selection Guide www.ti.com/wirelessconnectivityguide
• TI Connectivity Wikiwww.ti.com/connectivitywiki
• Wireless on ti.comwww.ti.com/wireless
• E2E Forumwww.ti.com/wiconforum
• TI Reference Designshttp://www.ti.com/general/docs/refdesignsearch.tsp
52
Support Resource• C2000
– www.ti.com/c2000
• Wireless connectivity– www.ti.com/wireless
• TI Wiki– processors.wiki.ti.com
• TI E2E support forum– e2e.ti.com
53