Smart Home Lighting Design

Course 30 Minutes Test 20 Minutes

TIS Training Program 2012 , Rev 1.1 www.tissmarthome.com

How TIS can control lights ?• BY ON / OFF throw Relay (switch)

• By Dimming using Dimmers

• By changing color using LED Driver

• By changing effect using DMX

Some Important Lighting Terms

What is Din Rail?

Some Important Lighting Terms

What is Lighting Channel?

Lighting Channel is set of lights turning On/OFF together

Some Important Lighting Terms

How to calculate Amps?

Amp= Watt/Volt If a lamp of 100 watt in 220 Volt supply than100/220volt = 0.45 A

TIS Lighting ControlRelay (switch) ON/OFF Control

Latching mechanical Relay 8 channels each of 16 AmpsRLY-8CH-16A

Strong Relay, with mechanical emergency switch.Can be turn ON/OFF from its switch without the needs of power supplyRecommended to use at least one of this relay in each project

TIS Lighting ControlRelay (switch) ON/OFF Control

Power Relay 12 channels each of 10 AmpsVLC-12CH-10A

Good Relay, fast and low noise , can be set to be used for lighting or other controlling system. Recommended to use this relay in most of (apartments, offices, hotel) project.

TIS Lighting ControlRelay (switch) ON/OFF Control

Power Relay 4 channels each of 10 AmpsRLY-4CH-10A

Good Relay, fast and low noise , small size can be set to be used for lighting or other controlling system. Recommended to use this relay in most of (shops , Rooms, offices, etc..)

TIS Lighting ControlRelay (switch) ON/OFF Control

Addition 3 Channels each of 5 AmpsADD-3R-5A

Small size , installed behind the panel in the wall box, fast and low noise , small size can be set to be used for lighting or other controlling system. Recommended to use this relay in (small rooms)

TIS Lighting ControlDimming Control

Dimmer 6 channels each of 2 AmpsDIM-6CH-2A

It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (spot and incandescent lights in homes)

TIS Lighting ControlDimming Control

Dimmer 4 channels each of 3 AmpsDIM-4CH-3A

It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (spot and incandescent lights in homes , restaurants, shops, etc…)

TIS Lighting ControlDimming Control

Dimmer 2 channels each of 6 AmpsDIM-2CH-6A

It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (big chandelier and big loads lights in homes , hotel lobby , restaurants , etc…)

TIS Lighting ControlDimming Control

LED Driver of 6 channels each of 1 Amps

LED-DRV-6CH-1A

It is very good for dimming all 12 Volt LED spot light, and LED rob light Recommended to use this Dimmer in all projects for controlling LEDIt require external power supply of 12V for LEDs

TIS Lighting ControlWhat we chose Dimmer or Relay?Its depends on load type and location

TIS Lighting ControlWe need relay ON/OFF control in

Economical projectsWCKitchenDress roomBalconyOutdoor lightsMost of roomsSome type of lights that can not dim

TIS Lighting ControlWe need dimmer control in

Family & formal living roomMaster bed roomsHotel lobbyRestaurantsMeting roomsCinema room

Wiring your Smart homeYou need to take all your lighting channels wires direct to the main Control room, using 1.5 mm and 2.5 mm

Your home lights wiringControl room

Dimmer Connection Method

Relay Connection Method

Wiring your Smart homeUse Cat5e cable to connect between all your Panels, relay and other TIS devices

Apartment Lighting ExampleWhat devices we need to control this home lights? (Each lamp is 50 Watts)

Exercise: Give the cheapest and perfect offer to satisfy your client to make this meting room smart with ON/OFF and Dimming control.

Each Lamp Is 50 Watt