sludge containers - wastequip s line of sludge containers is designed for collecting, storing and...
TRANSCRIPT
Wastequip’s line of sludge containers is designed for collecting, storing and transporting a variety of sludges and waste products.
• Suitableforavarietyofcontaminatedliquidsaswellashazardoussoils/mud,flyash,filtercake,carwashgrit
• Industriesincludemanufacturingfacilities,spillsites,constructionsites,refineries,minesandmore
SLUDGE CONTAINERSRound Bottom Style
Durable • Outsiderailunderstructure• ¼”floor,7gaugesides• 6”x2”x¼”tubinglongsills• 4”x3”x3/16”rectangulartubingtopcap• Continuousinsidewelds• 8”ODfrontandrearrollers• Flatfront• Ventedtopreventimplosionduringunloading
Quality • Oneyearwarranty
Fully sealed • Hydrotestedagainstleakage• GasketedreardoorwithT-boxseal• EPDMdoorseal• 4doorratchets-2onreardoor,oneeachonsidewall
• Reardoorsidehinged• Adjustablelatchesandhingesprovideafullseal
Value Added Benefits
Round bottom style
Rectangular style
Tel: 877.468.9278 [email protected] www.wastequip.com
Wastequip is the leading North American manufacturer of waste and recycling equipment for collecting, processing and transporting recyclables and solid or liquid waste. August 2010 © Wastequip, all rights reserved. Specifications subject to improvement without notice. Equipment displayed should be operated by properly trained personnel. Operators should become familiar with OSHA, ANSI and any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.
WQP009-082010
Available options• Front rollers*•Drains and valves•Dewatering shell• Placard holders
• Custom configurations - lid styles, understructures, gauge of steel
• Push plates
SLUDGE CONTAINERSRound Bottom Style
Replacementpartsavailableonlineatwww.partsplace-inc.com
Push plate (optional) Ratchets
Round bottom style with side-to-side tarp (optional aluminum placard shown)
21’ 9”
18’ 2”3’ 6”7’ 4” 7’ 4”
2’
2’
1’ 9”
7’ 6”
8”4’ 1” 4’ 1” 4’ 1” 4’ 1” 4’ 1”
21’ 9”
18’ 2”3’ 6”7’ 4” 7’ 4”
2’
2’
1’ 9”
7’ 6”
8”4’ 1” 4’ 1” 4’ 1” 4’ 1” 4’ 1”
Standard Color Choices*
Black Dark Gray Light Gray Teal Cadet Blue Green Tan Gold Orange Red Blue Gray Indigo Royal Blue Brown Charcoal
NOTE: Container also available in rectangular model
* Optional on rectangular models (standard on round bottom style)
Front Rear door
Top
Side
Tarped Container
* Contact your local plant for exact colors available.
Container weights (lbs.) with lid optionsSize Open top With Tarp
20 yard 5,655 5,88525 yard 6,125 6,355
Aluminum Side-to-side Rolling Lid
3’ 5” (20 yd.)4’ 3” (25 yd.)
8’ outside 8’ outside
7’ 4” inside
3’ 1/2”
8’ outside 8’ outside
7’ 4” inside
3’ 1/2”
21’ 5”inside
21’ 9”
4’ 3”
Patentedliddesign
Construction• Lidisformedof0.080gaugealuminum
• Folddownlidrollsandopenstoeithersideofcontainer
Opening and loading • Spring-assisted14ft.lidforeasyone-personoperation
• Springretainersholdlidopen
• Vacuumpressurereleaseeaseslidopening
• Slighttaperonlidsurfacepreventswatercollection
Steel Split Rolling Lid
Construction • Neoprenefoamaroundperimeteroflidprovidesvaportightseal
• Lidisformedof12gaugesteel• Slighttaperisbuiltintolidtoeliminatewatercollection
Opening and loading• Two-piece,end-to-endrollinglid• Vacuumpressurereleaseeaseslidopening• Springloadedlidsforeasyreleaseandgreasedwheelsmakethelidseasytoslideopen
Lid opens in 7.5’ W x 6.1’ L sections25 yard model
SLUDGE CONTAINERSRound Bottom Style
SLUDGE CONTAINERSRound Bottom Style
Aluminum Side-to-side Rolling Lid
3’ 5” (20 yd.)4’ 3” (25 yd.)
8’ outside 8’ outside
7’ 4” inside
3’ 1/2”
8’ outside 8’ outside
7’ 4” inside
3’ 1/2”
21’ 5”inside
21’ 9”
4’ 3”
Patentedliddesign
Construction• Lidisformedof0.080gaugealuminum
• Folddownlidrollsandopenstoeithersideofcontainer
Opening and loading • Spring-assisted14ft.lidforeasyone-personoperation
• Springretainersholdlidopen
• Vacuumpressurereleaseeaseslidopening
• Slighttaperonlidsurfacepreventswatercollection
Steel Split Rolling Lid
Construction • Neoprenefoamaroundperimeteroflidprovidesvaportightseal
• Lidisformedof12gaugesteel• Slighttaperisbuiltintolidtoeliminatewatercollection
Opening and loading• Two-piece,end-to-endrollinglid• Vacuumpressurereleaseeaseslidopening• Springloadedlidsforeasyreleaseandgreasedwheelsmakethelidseasytoslideopen
Lid opens in 7.5’ W x 6.1’ L sections25 yard model
SLUDGE CONTAINERSRound Bottom Style
SLUDGE CONTAINERSRound Bottom Style
Wastequip’s line of sludge containers is designed for collecting, storing and transporting a variety of sludges and waste products.
• Suitableforavarietyofcontaminatedliquidsaswellashazardoussoils/mud,flyash,filtercake,carwashgrit
• Industriesincludemanufacturingfacilities,spillsites,constructionsites,refineries,minesandmore
SLUDGE CONTAINERSRound Bottom Style
Durable • Outsiderailunderstructure• ¼”floor,7gaugesides• 6”x2”x¼”tubinglongsills• 4”x3”x3/16”rectangulartubingtopcap• Continuousinsidewelds• 8”ODfrontandrearrollers• Flatfront• Ventedtopreventimplosionduringunloading
Quality • Oneyearwarranty
Fully sealed • Hydrotestedagainstleakage• GasketedreardoorwithT-boxseal• EPDMdoorseal• 4doorratchets-2onreardoor,oneeachonsidewall
• Reardoorsidehinged• Adjustablelatchesandhingesprovideafullseal
Value Added Benefits
Round bottom style
Rectangular style
Tel: 877.468.9278 [email protected] www.wastequip.com
Wastequip is the leading North American manufacturer of waste and recycling equipment for collecting, processing and transporting recyclables and solid or liquid waste. August 2010 © Wastequip, all rights reserved. Specifications subject to improvement without notice. Equipment displayed should be operated by properly trained personnel. Operators should become familiar with OSHA, ANSI and any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. We assume no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.
WQP009-082010
Available options• Front rollers*•Drains and valves•Dewatering shell• Placard holders
• Custom configurations - lid styles, understructures, gauge of steel
• Push plates
SLUDGE CONTAINERSRound Bottom Style
Replacementpartsavailableonlineatwww.partsplace-inc.com
Push plate (optional) Ratchets
Round bottom style with side-to-side tarp (optional aluminum placard shown)
21’ 9”
18’ 2”3’ 6”7’ 4” 7’ 4”
2’
2’
1’ 9”
7’ 6”
8”4’ 1” 4’ 1” 4’ 1” 4’ 1” 4’ 1”
21’ 9”
18’ 2”3’ 6”7’ 4” 7’ 4”
2’
2’
1’ 9”
7’ 6”
8”4’ 1” 4’ 1” 4’ 1” 4’ 1” 4’ 1”
Standard Color Choices*
Black Dark Gray Light Gray Teal Cadet Blue Green Tan Gold Orange Red Blue Gray Indigo Royal Blue Brown Charcoal
NOTE: Container also available in rectangular model
* Optional on rectangular models (standard on round bottom style)
Front Rear door
Top
Side
Tarped Container
* Contact your local plant for exact colors available.
Container weights (lbs.) with lid optionsSize Open top With Tarp
20 yard 5,655 5,88525 yard 6,125 6,355