slite t5 applications guide v1.0
TRANSCRIPT
170608
TABLE OF CONTENTS
1. Introduction to Intralux Australia
2. Introduction and benefits of Slite T5
3. Why Close Proximity Lighting?
4. Slite T5 Application options
5. Typical applications
6. Examples
Appendix 1. Slite T5 Brochure
Appendix 2. Technical Cut Sheets
Appendix 3. Photometrics
Appendix 4. Install Guides
PG. 1
PG. 1
PG. 1-2
PG. 2
PG. 3
PG. 4
PG. 5
PG. 6
PG. 7
PG. 8
APPLICATIONS GUIDE
SLITE T5
170608 PG.1DS-FL04-EU May
1. INTRODUCTION TO INTRALUX AUSTRALIA
2. INTRODUCTION AND BENEFITS OF SLITE T5
3. WHY CLOSE PROXIMITY LIGHTING
Intralux Australia Pty Limited, a dynamic luminaire design and development company.Stringent quality control and advanced product testing procedures coupled with our 24 month warranty program, guarantee your future product reliability.
Slite T5 is a miniature lighting system for close proximity lighting and accent lighting of displays etc. and for task lighting. It's small depth at 27mm and integrated glare shield allow for unobtrusive powerful, low heat lighting that can fit into any situation. The Slite T5 is available in a range of watt-ages from 14W to 35W.
BENEFITS• Compact miniature height and width (27mm H x 51mm W) suits close proximity lighting applications• Available in various lengths giving flexibility of application• Low heat allowing for close proximity lighting• 125 degree asymmetrical light distribution optimised for even shelf and display cavity illumination• High output giving clarity of illumination• Low maintenance with up to 24,000** hour lamp life**** Manufacturers claim** Dependant on lamp selection
By effective lighting of displays Slite T5 draws attention to the display and increases its attractiveness.In a retail situation this can make this difference as to whether a product is sold or not.
Many situations occur where obstructions prevent general lighting from being effective, such as under shelves and inside cabinets. Lighting which is part of the structure provides the correct angle of lighting and the close proximity provides an effective and highly efficient system.
APPLICATIONS GUIDE
SLITE T5
Slite T5 in a home environment Slite T5 close up
Slite T5 in retail
170608 PG.2
Task lighting using close proximity lighting is effective in at least two ways. It allows precise and effective glare free lighting and it allows the option of a lower light level throughout the rest of the space, either for energy saving or to maintain the correct ambience (In a hotel reception counter for example where general lighting can be low, however the work can be performed efficiently).
Task Lighting
DS-FL04-EU May
4. Slite T5 Application optionsBoth Luminaires and ballasts can be rebate mounted. Power cables may also be rebated. Ballasts may be enclosed, however the ambient temprature must not exceed 40C
APPLICATIONS GUIDE
SLITE T5
170608 PG.3
5. TYPICAL APPLICATION AREAS
• Retail environment • Counters • Display Cases • Architectural detail
• Shelf illumination • Work Stations • Kitchens • Sub miniature coves
DS-FL04-EU May
APPLICATIONS GUIDE
SLITE T5
170608DS-FL04-EU May
DISPLAY CABINET LIGHT LEVELS
RECEPTION LIGHT LEVELS
Fixture layout from above
Fixture layout from above
APPLICATIONS GUIDE
Type
SLT5-135 1x35W
471
HorizontalLux (Av)
VerticalLux (Av)
655
Total Watts
Total Watts
PG.4
All examples are based on a 0.8 maintenance factor.
Light level measured in lux.
Light level measured in lux.
600
Average LuxSpacing m
0.95SLT5-114 2x14W
Type
SLITE T5
Desk Reflectance: 50% Distance to desk: 400mm
42
33.6
Slite T5
0.8m
0.4m
1.5m
0.5m
Slite T5
Miniature IlluminationIllumination for tomorrow’s world.
The Fabulous NEW Slite T5 is here. The absolute ultimate solution for under shelf, under cabinet, showcase and work station illumination.
In our ever changing fast paced work environments whether they be in retail, hospitality or commercial, the need for high quality ‘close proximity’ illumination has never been greater.
With the introduction of T5 Fluorescent lamp technology we now have the luxury of replacing earlier larger aging technology in the fluorescent market, coupled to significant additional benefits to help us all.
The T5 lamp boasting a diameter of just 16mm and is available in lengths approaching 1500mm which produces enormous levels of high performance illumination. This fluorescent lamp technology offers amazing colour rendering properties of 85 CRI and has lamp efficacy of up to 104 lm/ w.*
The application of this new exciting fluorescent technology with stylised and curvaceous design from Intralux have united the best of lamp technology and luminaire product development to offer this fabulous range of new products.
‘close proximity’ illumination
high performance
Slite T5 Shelf Lighting
task lighting
Small size. Big impact.
Screw fixing
Slite T5 offers not only the designer but ultimately the end user an economical high performance and stylised solution with their ‘close proximity’ illumination requirements.
A retail space obviously requires the high quality illumination of the merchandise to ensure that the passing consumer is attracted to that merchandise to instigate a sale.
Equally important is a work station environment where high quality illumination is critical. A high rise building for example, where
high levels of quality light on the work surface with low levels of glare are essential in this modern,
computer screen age we work in.
The front desk in a prestigious hotel lobby is another example where high quality
illumination is needed to ensure that the hotel staff can operate effectively on the work plane without the need for glary light on themselves and / or their customers checking in. Slite T5 provides the ultimate solution for all of these applications and more.
An integrated diffuser is another design feature which provides for easy cleaning and potential application in food preparation environments. By having the lamp concealed this provides an excellent level of protection in areas that might otherwise be vulnerable to people.
The installation of the new Slite T5 system is very fast and therefore extremely cost effective. Location via 2 quick fix screws and / or suitable double sided engineering tape or adhesive**. The product is supplied in standard configuration with 2 metres of cabling between the fixture and the remote ballast which can obviously be concealed if necessary.
Surface illumination is vital. Light is important to all of us. The application of Slite T5 will ensure that high levels of quality illumination are placed on the surfaces that are important to us whether they be in retail, hospitality, or one of many other potential applications.
Lens removal
miniature illumination
Benefits
cost effective
integral cover
high quality
lightweight
Available in a range of modular lamp sizes from 600mm through to 1500mm, the Slite T5 system caters for all shelving, under cabinet, work station and display environments.
The combination of high technology, micro processor controlled electronic ballasts coupled to the T5 fluorescent lamp technology insure 20,000 hours* of trouble free, flicker free operation without need for messy lamp starters and additional heat.
The Slite T5 produces an ultra smooth 125˚ light distribution which is of course biased towards the rear of the illumination plane while controlled spill allows effective illumination of stepped surfaces placed vertically in front of the fixtures.
Luminous intensity (cd/1000 lamp lumens)
Light DistributionLuminaire Dimensions
Slite T5 shown at size
Photometrics
Intralux Australia Pty Limited (Head Office and Export Sales) A.C.N. 010 644 694: 23 Enterprise Street, PO Box 557, Richlands, Brisbane Qld 4077, Australia.Tel: +61 7 3375 9333 Fax: +61 7 3375 9444 Email: [email protected] Web: www.intralux.com
Design and Trade Mark registrations pending. Intralux Products are designed and built to comply with appropriate International Standards. All brand names on this brochure are Trade Marks of their respective holders.
Intralux Australia reserves the right to alter the designs and specifications of these products without notice. Slite T5 export brochure May 2004 E&OE
Local Distributor
* Manufacturers claim ** Contact your local manufacturer for a suitable adhesive tape.
031007
October 2003DATE CODE
PROJECT TYPE
Intralux Australia Pty Limited 23 Enterprise Street, PO Box 557, Richlands, Brisbane, Queensland, 4077, AustraliaTel: +61 7 3375 9333 Fax: +61 7 3375 9444 Email: [email protected] Web: www.intralux.com
Each T5 Slite comes complete with 2 metre cable tail, remote electronic ballast and lamp.Left or Right hand cable exit can be determined on site.
Simply specify the Product Code utilising the following information.
For information on non-standard colours, contact your Intralux Distributor.
IP (International Protection) indicates the degree of protection to the ingress of solids and liquids.
Ease of maintenance by the inclusion of an integral cover which is suitable for use in food preparation areas.
Colour
Lamp Guide FH T5 Fluorescent Lamp, 16mm diameter
IP40Conforms to EN 60598Designed and built to comply with appropriate International Standards.
Lamp Wattage
SLT5-14/A1ColourSL = Slite
Lamp TypeProduct Code
Protected against penetration of solids larger than 1mm.
Design Features
14W (550mm)21W (850mm)
28W (1150mm)35W (1450mm)
4
Ballast
LampLuminaire
Standard ballasts have integrated terminal blocks for on site hard wiring.
• Clear Anodised Extrusion, metalic grey endcaps, grey flex and ballast box. Code A1• White Powdercoated extrusion, white endcaps, white flex and ballast box. Code W1
Slite Ballast SLT5-B
Ballast Type High frequency electronic device with current controlled circuitry and end of life protection
Input Voltage Universal Voltage - 120-277 volt a.c, 50/60 Hz
Height x Width x Length (mm) 23 x 54 x 262mm
Operating Temperature Ballasts are rated to operate in ambient temperatures up to 50˚C
Slite Luminaires SLT5-14 SLT5-21 SLT5-28 SLT5-35
Configuration 1x14 watt 1x21 watt 1x28 watt 1x35 watt
Length (mm) 608 908 1208 1508
Height x Width (mm) 27 x 51 27 x 51 27 x 51 27 x 51
Nominal Cable Diameter (mm) 6.5 6.5 6.5 6.5
Lamp Life (hrs)** 20000 20000 20000 20000
Lamp Type T5 (diameter 16mm
Lamp Color Temperature (˚K)** from 2700˚K - 6000˚K dependant on market availability
Lamp Color Rendering (Ra)** 85 85 85 85
Lamp Efficacy (lm/w)** 95 100 104 104
Max. Luminous Flux (lm) @ 35˚C** 1350 2100 2900 3650
Operating Temperature Slite Luminaires are rated to operate in ambient temperatres up to 40˚C
** Manufacturers claim
SLT5-TI-1-EU D
SLITE T5 LUMINAIRETECHNICAL INFORMATION
Design and Trade Mark registrations pending. Intralux Products are designed and built to comply with appropriate International Standards. All brand names on this brochure are Trade Marks of their respective holders. Some of the images in this brochure are computer generated representations. Intralux Australia reserves the right to alter the designs and specifications of these products without notice. SLT5-TI-1-EU October 2003 E&OE
File NameFile NameFile NameFile Name SLT5-14.iesSLT5-14.iesSLT5-14.iesSLT5-14.ies SLT5-21.iesSLT5-21.iesSLT5-21.iesSLT5-21.ies SLT5-28.iesSLT5-28.iesSLT5-28.iesSLT5-28.ies SLT5-35.iesSLT5-35.iesSLT5-35.iesSLT5-35.ies
Lamp ConfigurationLamp ConfigurationLamp ConfigurationLamp Configuration 1 x 14W 1 x 21W 1 x 28W 1 x 35W
Length (mm) 27 H x 51 WLength (mm) 27 H x 51 WLength (mm) 27 H x 51 WLength (mm) 27 H x 51 W 608 908 1208 1508
Luminous length (mm) Lum. 30 W x 30 HLuminous length (mm) Lum. 30 W x 30 HLuminous length (mm) Lum. 30 W x 30 HLuminous length (mm) Lum. 30 W x 30 H 520 820 1120 1420
Total lamp lumen output **Total lamp lumen output **Total lamp lumen output **Total lamp lumen output ** 1350 2100 2900 3650
**Manufacturers Data
Original test file intro0001.iesintro0001.iesintro0001.iesintro0001.ies
All additional data has been derived by Intralux from the above test report file by a pro-rata process of luminous dimensions and lamp lumens.
Derived data is an approximation.
0riented in accordance with Australian,
and European practice, C zero plane perpendicular to lamp
The above files are available from our web site (www.intralux.com) as a pre-packaged AGI-32 V2dot0 Instabase/PDP file and are complete with appropriate symbol files and images.
For users of other programmes data is also available as stand alone North American IES data files.
Slite T5 Photometric data index
July-2008
031007
October 2003DATE CODE
PROJECT TYPE
Intralux Australia Pty Limited 23 Enterprise Street, PO Box 557, Richlands, Brisbane, Queensland, 4077, AustraliaTel: +61 7 3375 9333 Fax: +61 7 3375 9444 Email: [email protected] Web: www.intralux.com
Check the direction the cable is to run and route it into the appropriate groove. Slite T5 is designed to be positioned at the front edge of a shelf to give maximum illumination to the shelf below.
Unclip the lens by flexing it together. Do not use objects such as screwdriver, knife or pliers. Remove lamp (if applicable) by rotating 90˚ in either direction.
Screw luminaire into place with screws provided. Alternatively a suitable adhesive tape can be used. Please contact your local supplier for a recommendation. Insert lamp and rotate 90˚. Note: if luminaire is used vertically ensure branding on lamp is at the bottom. Clip lens into place.
Connect the T5 Slite to the ECG electronic contol gear. Use a screwdriver to remove terminal block covers from the ballast. Note: Ensure ballast is not connected to the mains.
Open terminal block clamp by inserting a small screwdriver into the top slot. Connect the four core connecting cable to the ECG. (see table below). Connect the mains cable to the ECG or appropriate plugset to the mains input side of the ECG. Note: earth required for EMC compliance.
Route cables through appropriate cable clamp details and replace covers. Check cables are secured tightly.
Screw onto shelf. Switch on luminaire. New lamps will take several minutes to reach full brightness.
Warning: Ensure ballast is disconnected from mains before replacing lamp.
1 Not required2 Black3 Black
8 Blue9 Brown
2
89
3
1 2
3
4
5
7
6
8
9
10
11
12 Luminaire Wiring Connection
SLITE T5 LUMINAIRESLT5... 14-35 WATT INSTALLATION GUIDE
DS-ST501-EU C
21
34
5
7
810
9
1211
6
Design and Trade Mark registrations pending. Intralux Products are designed and built to comply with appropriate International Standards. All brand names on this brochure are Trade Marks of their respective holders. Some of the images in this brochure are computer generated representations. Intralux Australia reserves the right to alter the designs and specifications of these products without notice. DS-ST501-EU October 2003 E&OE