slings

1

Technical changes reserved.

GEWA - binding ropes DIN-EN 13414-1-4 (formerly DIN 3088)

4. pressed with thimble (PKF)

1. pressed (P)

5. Flemish eye with thimble, steelclamp (PFKF)

2. Flemish eye, steel clump (PF)

6. pressed with eye (SKF)

3. interlocked (S)

8. DIN-EN 13414-3infinitely interlocked (Grummet) (EG)

7. DIN-EN 13414-4infinitely pressed (EP)

2

1-strand 2-strand 3- and 4-strand Endless spliced bindig ropes bindig ropes bindig ropes or pressed

rope loopsangle ß – – 0 to 45° ** more than 45° to 60° 0 to 45° ** 45° to 60° DIN-EN 13414-4

Method of fastening Method of fastening Method of fastening Method of fasteningdirectly laced directly laced directly laced directly laced directly laced

Ø of rope d

[kg] [kg] [kg] [kg] [kg] [kg] [kg] [kg] [kg] [kg]

8 700 560 950 780 700 560 1450 1050 2750 1100

10 1000 800 1400 1100 1000 800 2100 1500 4250 1700

12 1500 1200 2100 1680 1500 1200 3150 2250 6250 2500

14 2000 1600 2800 2240 2000 1600 4200 3000 8250 3300

16 2700 2160 3800 3000 2700 2160 5650 4000 10800 4350

18 3150 2500 4400 3500 3150 2500 6600 4700 14100 5600

20 4000 3200 5600 4480 4000 3200 8400 6000 17200 6900

22 5000 4000 7000 5600 5000 4000 10500 7500 21000 8400

24 6300 5000 8800 7000 6300 5000 13200 9400 25000 10000

26 7000 5600 9800 7800 7000 5600 14700 10500 29500 11800

28 8000 6400 11200 8900 8000 6400 16800 12000 33700 13500

32 11000 8800 15400 12300 11000 8800 23000 16500 45000 18000

36 14000 11200 19600 15600 14000 11200 29000 21000 56200 22500

40 17000 13600 23800 19000 17000 13600 35700 25500 70000 28000

44 21000 16800 29000 23500 21000 16800 44000 31500 83700 33500

48 25000 20000 35000 28000 25000 20000 52000 37000 100000 40000

52 29000 23200 40000 32400 29000 23200 60900 44000 117500 47000

56 33500 26800 47000 37500 33500 26800 70300 50000 135000 54000

60 39000 31200 54000 43600 39000 31200 81000 58000 157500 63000

1 0,8 1,4 1,12 1 0,8 2,1 1,5 2 x 2 1,6


GEWA - binding ropes DIN-EN 13414-1-4 (formerly DIN 3088)

Carrying capacity according to DIN-EN 13414-1/2/4.Table 1 to 4 states carrying cap. from 1-polystrandbinding ropes and for endless ropes N, F, K and G. Itholds polystrand binding ropes and symetric loadonly, i.e. for the same angles of inclination on everystrand (picture 1). Simultaneously, there must beangle from 0 to 45° or from 45° to 60° between twoareas.

Notice: stated data in table 1 to 4 indicate relativerelations of ropes.

The angle of inclination of 1-strand rope must not beover 60°. For asymetric burdens, e.g.: picture 2,hold the values 45° to 60° in table 1 and 2.

Table 1: Rope with textile inlay. Termination: pressured aluminium clamps(formerly the method of fastening N) – Carrying capacity in kg

Carrying capacity of binding ropes

Carrying capacity of 1-strand rope,The method of fastening - straight (Picture 1) (Picture 2)

Balanced load Unbalanced load

3


Binding ropesDIN-EN 13414-1/2(formerly DIN 3088)

Upper part: eye,1-strand,basic length 1 m (L)


Upper part: eye,1-strand,basic length 1 m (L)

* “laced” design reduces carrying capacity by about 20%

Rope Carry Art number Art number Art number Art number Art numberdiameter capacity Basic length Basic length Basic length Basic length Basic length

1 Meter 1 Meter 1 Meter 1 Meter 1 Meter[mm] [kg]

8 700 110008 110108 110208 110608 110808

10 1000 110010 110110 110210 110610 110810

12 1500 110012 110112 110212 110612 110812

14 2000 110014 110114 110214 110614 110814

16 2700 110016 110116 110216 110616 110816

18 3150 110018 110118 110218 110618 110818

20 4000 110020 110120 110220 110620 110820

22 5000 110022 110122 110222 110622 110822

24 6300 110024 110124 110224 110624 110824

26 7000 110026 110126 110226 110626 110826

28 8000 110028 110128 110228 110628 110828

32 11000 110032 110132 110232 110832

36 14000 110036 110236 110836

40 17000 110040 110240 110840

Lower part

Rope Carry Art number Art number Art number Art number Art numberdiameter capacity Basic length Basic length Basic length Basic length Basic length

1 Meter 1 Meter 1 Meter 1 Meter 1 Meter[mm] [kg]

8 700 111008 111108 111208 111608 111808

10 1000 111010 111110 111210 111610 111810

12 1500 111012 111112 111212 111612 111812

14 2000 111014 111114 111214 111614 111814

16 2700 111016 111116 111216 111616 111816

18 3150 111018 111118 111218 111618 111818

20 4000 111020 111120 111220 111620 111820

22 5000 111022 111122 111222 111622 111822

24 6300 111024 111124 111224 111624 111824

26 7000 111026 111126 111226 111626 111826

28 8000 111028 111128 111228 111828

32 11000 111032 111132 111232 111832

36 14000 111036 111236 111836

40 17000 111040 111240 111840

High-strengthload hook

Sika-hook

Eye Thimble* Slidinghook

Lower partHigh-strengthload hook

Sika-hook

Eeye Thimble* Slidinghook

4


Rope- Carry capacity Art number Art number Art number Art numberdiameter 0 - 45° more 45° - 60° Basic length Basic length Basic length Basic length

1 Meter 1 Meter 1 Meter 1 Meter

[mm] [kg] [kg]

8 950 700 112008 112108 112608 112808

10 1400 1000 112010 112110 112610 112810

12 2100 1500 112012 112112 112612 112812

14 2800 2000 112014 112114 112614 112814

16 3800 2700 112016 112116 112616 112816

18 4400 3150 112018 112118 112618 112818

20 5600 4000 112020 112120 112620 112820

22 7000 5000 112022 112122 112622 112822

24 8800 6300 112024 112124 112624 112824

26 9800 7000 112026 112126 112626 112826

28 11200 8000 112028 112128 112828

32 15400 11000 112032 112132 112832

36 19600 14000 112036 112836

40 23800 17000 112040 112940

Lower partSika-hook



Upper part eye,2-strand,basic length 1 m (L)

Rope Carry capacity Art number Art number Art number Art numberdiameter 0 - 45° more 45° - 60° Basic length Basic length Basic length Basic length


[mm] [kg] [kg]

8 1450 1050 113008 113108 113608 113808

10 2100 1500 113010 113110 113610 113810

12 3150 2250 113012 113112 113612 113812

14 4200 3000 113014 113114 113614 113814

16 5650 4000 113016 113116 113616 113816

18 6600 4700 113018 113118 113618 113818

20 8400 6000 113020 113120 113620 113820

22 10500 7500 113022 113122 113622 113822

24 13200 9400 113024 113124 113624 113824

26 14700 10500 113026 113126 113626 113826

28 16800 12000 113028 113128 113828

32 23000 16500 113032 113132 113832

36 29000 21000 113036 113136 113836

40 35700 25500 113040 113140 113840

Lower partSika-hook



Upper part eye,3-strand,basic length 1 m (L)


5




upper part eye,4-strand,basic length 1 m (L)

Multihook with eyestype WDOWhen using thick binding implements or thick suspension heads, then the head may notfit in a conventional crane hook. We offer a solution by means of the multihook.Advantages:

► No pressed bindingmeans

► Safety thanks toquality steel ST 52-3

► Balanced lay-out of carrying capacities atpolystrand binding means

► Safety thanks to 2stable hook locks.

Carry. cap. a b c d e f Art. no.

[kg] [mm] [mm] [mm] [mm] [mm] [mm]

800 60 235 120 62 90 140 138000

1250 60 250 130 62 90 155 138001

2000 80 300 160 70 120 180 138002

2500 80 320 170 70 120 200 138003

3000 90 340 182 75 140 220 138004

4000 90 400 214 80 140 240 138005

5000 100 435 227 85 160 260 138006

8000 140 594 330 120 230 320 138007

10000 160 650 335 130 260 355 138008

a

cb

d

e

f

maximalsafety!

Rope Carry capacity Art number Art number Art number Art numberdiameter 0 - 45° more 45° - 60° Basic length Basic length Basic length Basic length


[mm] [kg] [kg]

8 1450 1050 114008 114108 114608 114808

10 2100 1500 114010 114110 114610 114810

12 3150 2250 114012 114112 114612 114812

14 4200 3000 114014 114114 114614 114814

16 5650 4000 114016 114116 114616 114816

18 6600 4700 114018 114118 114618 114818

20 8400 6000 114020 114120 114620 114820

22 10500 7500 114022 114122 114622 114822

24 13200 9400 114024 114124 114624 114824

26 14700 10500 114026 114126 114626 114826

28 16800 12000 114028 114128 114828

32 23000 16500 114032 114132 114832

36 29000 21000 114036 114836

40 35700 25500 114040 114840

Lower partSika-hook


6

Rope Method of fastening Art. no. Art. no. Art. no.diameter directly 1) laced 2 pressing shortly long spliced

clamp spliced (without (thickened) thickening)

[d] [kg] [kg]

8 2750 1100 115008 115108 115208

10 4250 1700 115010 115110 115210

12 6250 2500 115012 115112 115212

14 8250 3300 115014 115114 115214

16 10800 4350 115016 115116 115216

18 14100 5650 115018 115118 115218

20 17200 6900 115020 115120 115220

22 21000 8400 115022 115122 115222

24 25000 10000 115024 115124 115224

26 29500 11800 115026 115126 115226

28 33700 13500 115028 115128 115228

32 45000 18000 115032 115132 115232

36 56200 22500 115036 115136 115236

40 70000 28000 115040 115140 115240

44 83700 33500 115044 115144 115244

48 100000 40000 115048 115148 115248

52 117500 47000 115052 115152 115252

Rope Method of fasteningArt. no. diameter directly 1) laced

[d] [kg] [kg]

24 18000 7200 115324

27 22300 8900 115327

30 28000 11000 115330

33 32900 13100 115333

36 40000 16000 115336

39 47000 18700 115339

42 53900 21500 115342

48 71000 28400 115348

54 89900 35900 115354

60 110000 44000 115360

A B C

A B

C


Endless rope loops DIN-EN 13414-4 (formerly DIN 3088)made of endless loop and endless pressed in rope

Endless rope loops spliced in Grummets method DIN-EN 13414-3(formerly DIN 3088)endless spliced rope (Grummets)carrying capacity in kg depends on the method of fastening

2 pressingclamps

long spliced (withoutthickening)

shortly spliced(thickened)

1) Carrying capacity of 2 ropes

1) Carrying capacity of 2 ropes

7


Binding ropes DIN-EN 13414-1 (formerly DIN 3088)Ø composition.: 6 x (6 x 36 + 1 IWRC) + FC in cable design with 1770 N/qmmtwo-sided spliced eyes

Endless loops made of steel rope (Grummets)with 1770 N/qmm in cable design, zinc-coated, highly flexible; composition.: 7 x 6 x 37 + 7 FC/IWRC; DIN-EN 13414-3 (formerly DIN 3088)

Rope-Ø Carry. cap. Art. no. Art. no. vertically spliced spliced eyes

[mm] [kg] eyes PU-surface modification

24 4000 115524 115624

30 6000 115530 115630

33 7500 115533 115633

36 9000 115536 115636

39 10500 115539 115639

42 12000 115542 115642

48 15800 115548 115648

54 20000 115554 115654

60 25000 115560 115660

66 30000 115566 115666

72 35500 115572 115672

78 42000 115578 115678

84 49000 115584 115684

90 56000 115590 115690

96 63000 115596 115696

Pressed-in eyes can be delivered on order.

Rope-Ø Carrying cap. Art. no. Art. no.[mm] FC [kg] IWRC [kg] FC SE

18 4150 115718

21 5600 115721

24 7400 115724

27 9300 115727

30 11500 14000 115730 115830

33 14000 17000 115733 115833

36 16500 20000 115736 115836

39 19500 23000 115739 115839

42 22500 27000 115742 115842

48 29500 35500 115748 115848

54 37200 45000 115754 115854

60 46000 55500 115760 115860

66 55700 67000 115766 115866

72 66300 80000 115772 115872

78 77800 93600 115778 115878

84 90000 108600 115784 115884

90 - 125200 - 115890

96 - 142000 - 115896

Further designs can be delivered on order.

8


Wire ropes – technical information

incorrect measurement correct measurement

Direct right-handed winding Direct left-handed winding DIN/EN- mark „zZ” DIN/EN-mark „sS”

Direct winding: Wires in the rope strand have the same windingdirection as the strands in the rope.

Kinds of splicing rope strands

right-handed rope left-handedDIN/EN-mark „sZ” DIN/EN-mark „zS”

Cross winding: Wires in the rope strand have opposite windingdirection than the strands in the rope.

Rope with low tension stressRope with low tension stress is a rope with strands andwires which do not leave the volume after unfastening load.

Nontwisting ropeRope is nontwisting if it minimally or never twists around itsaxial while there is a force acting in direction of the axial. Thisquality is reached by a special construction and by a specialmethod of winding (multilayer ropers of round strands, ropeof flat strands, spliced ropes and further structures).

Right and left-handed ropesWhen reeling up the ropes, respect the following:Trommeln mit Linksschnitt erfordern rechtsgängige Seile (Z)Trommeln mit Rechtsschnitt erfordern linksgängige Seile (S)

Leading rope from above

from left to right from right to leftright-handed rope left-handed ropereel „Z” reel „S

Leading rope from bellow

from left to right from right to leftright-handed rope left-handed ropereel „Z” reel „S”

9

1-strand ropes and bowden ropes1 x 37, zinc-coated, EN 12385, 1-4, 8, 10*(formerly DIN 3054)structure : M Rope Weigth Calculated value Minimal value Art. no.

diameter 100 m of breaking of breaking zinc-power power coated

[mm] [kg] [kN] [kN]

3 4,40 9,39 8,16 100040

4 7,82 16,70 14,50 100041

5 12,20 26,10 22,70 100042

6 17,60 37,50 32,70 100043

At nominal wire tenacity from

1770 N/qmm

Rope from round strands6 x 7 with textile inset /FC, zinc-coated,EN 12385, 1-4, 8, 10*standard structure : M, sZ(formerly DIN 3055/FE)

Rope Weigth Calculated value Minimal value Art. no.diameter 100 m of breaking of breaking zinc-

power power coated[mm] [kg] [kN] [kN]

2 1,43 2,6 2,3 100060

3 3,22 5,8 5,2 100061

4 5,72 10,5 9,4 100062

5 8,94 16,3 14,7 100063

6 12,90 23,5 21,1 100064

7 17,50 32,0 28,8 100065

8 22,90 41,8 37,6 100066

9 28,90 52,9 47,6 100067

10 35,70 65,3 58,8 100068

11 43,20 79,1 71,1 100069

12 51,50 94,1 84,7 100070

13 60,40 110,0 99,4 100071

14 70,10 128,0 115,0 100072

16 91,50 167,0 151,0 100073

* New EN- norms

securing, anchorange, conducting,handling with track cable of cablecar

anchor ropes, carry ropes, haulingropes, ropes for ski lifts


1770 N/qmm

Flat wire - bowden hosewith plastic - PVC - sheath,black (silver or white only on order)in ringen à 10, 25, 50 and 100 Meter

Sheath (Bushing)manufactured for flat wires - bowden hosesmade of metal sheet, zinc-coated

Inside diameter Outside diameter Art. no.incl. PVC[mm] [mm]

2,0 3,8 107650

2,5 4,8 107651

3,0 5,3 107652

3,5 6,0 107653

4,0 6,8 107654

5,0 7,8 107656

6,0 9,2 107657

Designed for Art. no.inside diameter[mm]

2,0 122670

2,5 122671

3,0 122672

3,5 122673

4,0 122674

5,0 122675

6,0 122676


10

Rope Weigth Calculated Minimal Art. no. Art. no.diameter 100 m value of value of glossy zinc-coated

breaking breakingpower power

[mm] [kg] [kN] [kN]

8 24,3 44,5 38,3 100192 100212

9 30,8 56,3 48,4 100193 100213

10 38,0 69,5 59,8 100194 100214

11 46,0 84,1 72,3 100195 100215

12 54,7 100,0 86,1 100196 100216

13 64,3 117,0 101,0 100197 100217

14 74,5 136,0 117,0 100198 100218

Rope of round strands6 x 19, EN 12385, 1-6, 8, 10*, with textile inset /FC, seal structure /S, sZ,(formerly DIN 3058/FE)

scraper, excavator, reel,shifting rope, drilling rope,ropes for driving disk


1770 N/qmm



[mm] [kg] [kN] [kN]

8 26,7 51,6 41,3 100242 100262

9 33,9 65,3 52,3 100243 100263

10 41,8 80,6 64,6 100244 100264

11 50,6 97,6 78,1 100245 100265

12 60,2 116,0 93,0 100246 100266

13 70,7 136,0 109,0 100247 100267

14 82,0 158,0 127,0 100248 100268

6 x 19with steel inset(SES)/IWRC*

scraper, excavator, reel,shifting rope, drilling rope,ropes for driving disk


1770 N/qmm

* New EN-norms



[mm] [kg] [kN] [kN]

3 3,11 5,69 4,9 100390 100 420

3,5 4,50 8,35 7,2 100391 100421

4 5,54 10,10 8,7 100392 100422

5 8,65 15,80 13,6 100393 100423

6 12,50 22,80 19,6 100394 100424

6,5 15,00 25,00 21,5 100395 100425

7 17,00 31,00 26,7 100396 100426

8 22,10 40,50 34,8 100397 100427

9 28,00 51,20 44,1 100398 100428

10 34,60 63,30 54,4 100399 100429

11 41,90 76,50 65,8 100400 100430

12 49,80 91,10 78,3 100401 100431

13 58,50 107,00 91,9 100402 100432

14 67,80 124,00 107,0 100403 100433

16 88,60 162,00 139,0 100404 100434

18 112,00 205,00 176,0 100405 100435

19 125,00 228,00 196,0 100406 100436

20** 138,00 253,00 218,0 100407 100437

Rope of round strands6 x 19, EN 12385, 1-5, 10*, with textile inset /FC, standard structure /M, sZ,(formerly DIN 3060/FE)

binding ropes, cranes,elect. pulleys, reels


1770 N/qmm

** It is possible to deliver wireropes highly zinc-coated thatcan be used for bridge railing.


11



[mm] [kg] [kN] [kN]

8 22,3 38,7 32,5 100450 100470

10 34,8 60,5 50,8 100451 100471

11 42,2 73,2 61,5 100452 100472

12 50,2 87,1 73,5 100453 100473

13 58,9 102,0 85,9 100454 100474

14 68,3 119,0 99,6 100455 100475

15 78,4 136,0 114,0 100456 100476

16 89,2 155,0 130,0 100457 100477

Ropes of round strands8 x 19, EN 12385, 1-5, 8, 10*, with textile inset /FC, strength structure /S, sZ, (formerly DIN 3062/FE)

excavators,scrapers, reels,cranes, elevators


1770 N/qmm

8 x 19, with steel inset, (SES)/IWRC*



[mm] [kg] [kN] [kN]

8 27,2 51,0 38,2 100500 100520

10 42,5 79,8 59,9 100501 100521

11 51,4 96,6 72,5 100502 100522

12 61,2 115,0 86,3 100503 100523

13 71,9 135,0 101,0 100504 100524

14 83,3 156,0 117,0 100505 100525

15 95,7 180,0 135,0 100506 100526

16 109,0 204,0 153,0 100507 100527

excavators,scrapers, reels,cranes, elevators


1770 N/qmm

Rope Weigth Calculated Minimal Art. no.diameter 100 m value of value of glossy


[mm] [kg] [kN] [kN]

8 24,3 44,3 37,4 100650

9 30,8 56,1 47,2 100651

10 38,0 69,1 58,4 100652

11 46,0 83,9 70,6 100653

12 54,8 100,0 84,0 100654

13 64,3 117,0 98,3 100655

14 74,5 136,0 144,0 100656

16 97,3 178,0 149,0 100657

18 123,0 225,0 189,0 100658

20 152,0 278,0 234,0 100659

22 184,0 336,0 282,0 100660

24 219,0 400,0 336,0 100661

Ropes of round strands6 x 36, EN 12385, 1-5, 8, 10*, with textile inset /FC, strength structureWarrington /WS, sZ, (formerly DIN 3064/FE)

excavators, scrapers,reels, cranes,elevators, lifting ropes


1770 N/qmm


12

Rope Weigth Calculated Minimal Art. no.diameter 100 m value of value of glossy


[mm] [kg] [kN] [kN]

8 26,8 51,6 40,4 100680

9 33,9 65,3 51,1 100681

10 41,8 80,4 63,0 100682

11 50,6 97,3 76,1 100683

12 60,2 116,0 89,9 100684

13 70,7 136,0 106,0 100685

14 82,0 158,0 124,0 100686

16 107,0 206,0 161,0 100687

18 135,0 261,0 204,0 100688

20 167,0 323,0 252,0 100689

22 202,0 390,0 304,0 100690

24 241,0 464,0 363,0 100691

6 x 36, with steel inset, (SES)/IWRC*

excavators, scrapers,reels, cranes, elevators,lifting ropes


1770 N/qmm

Notice:The rope can be used as a lift only with adetermined lifting heigth



[mm] [kg] [kN] [kN]

6 12,5 22,8 18,8 100710 100750

7 17,0 31,0 25,6 100711 100751

8 22,1 40,5 33,4 100712 100752

9 28,0 51,2 42,3 100713 100753

10 34,6 63,3 52,2 100714 100754

11 41,9 76,5 63,1 100715 100755

12 49,8 91,1 75,1 100716 100756

13 58,5 107,0 88,2 100717 100757

14 67,8 124,0 102,0 100718 100758

15 77,9 142,0 117,4 100719 100759

16 88,6 162,0 134,0 100720 100760

18 112,0 205,0 169,0 100721 100761

19 125,0 222,0 191,0 100722 100762

20 138,0 253,0 209,0 100723 100763

21 153,0 277,0 238,0 100724 100764

22 167,0 306,0 253,0 100725 100765

Ropes of round strands6 x 37, EN 12385, 1-4, 10*, with textile inset/FCstandard structure /M, sZ, (formerly DIN 3066/FE)

binding ropes, reels,cranes


1770 N/qmm

Ropes of rounds strands18 x 7, EN 12385, 1-4, 10*, with textile inset/FC, nontwisting rope, sZ, strandstructure /M, (formerly DIN 3069/FE)



[mm] [kg] [kN] [kN]

4 6,13 11,6 9,02 100800 100810

5 9,57 18,1 14,10 100801 100811

6 13,80 26,0 20,30 100802 100812

7 18,80 35,4 27,60 100803 100813

8 24,50 46,3 36,10 100804 100814

9 31,00 58,6 45,70 100805 100815

10 38,30 72,3 56,40 100806 100816

electric pulleys, cranes,lifting devices


1770 N/qmm


13

Special rope Alphaliftparticulary flexible, cross winding, sZ, impregnated

Rope Total Weigth Calculated Minimal Calculated Minimal Art. no. Art. no.diameter cross- 100 m breaking value breaking value breaking value breaking value 1770 N/qmm 1960 N/qmm

section 1770 N/qmm 1770 N/qmm 1960 N/qmm 1960 N/qmm glossy glossy[mm] [mm] [kg] [kN] [kN] [kN] [kN]

4,0 8,0 6,8 14,1 11,7 15,6 13,0 101110 101140

4,5 10,0 8,6 17,7 15,1 19,6 16,7 101111 101141

5,0 12,3 10,6 21,8 19,0 24,1 21,1 101112 101142

5,5 14,8 12,8 26,3 23,6 29,1 26,1 101113 101143

6,0 18,2 15,7 32,3 28,5 35,7 31,5 101114 101144

6,5 22,4 19,2 39,7 34,2 43,9 37,9 101115 101145

7,0 24,9 21,4 44,1 38,5 48,8 42,6 101116 101146

7,5 28,5 24,5 50,4 44,8 55,8 49,6 101117 101147

8,0 33,0 28,4 58,5 49,6 64,7 55,0 101118 101148

8,5 37,1 31,9 65,7 53,0 72,7 58,7 101119 101149

9,0 41,4 39,6 73,3 65,0 81,2 72,0 101120 101150

10,0 50,2 43,2 88,8 75,8 98,4 84,0 101121 101151


1770 N/qmm 1960 N/qmm

Recommendation:Direct winding and bigger diameterscan be delivered on order.

Alphalift ropes must not be usedwith a revolving carabiner.

Electric elevators,lifting devices,assembly ropes

Ropes of round strands12 x 7, without textile inset, nontwisting rope, sZ, strand structure /M



[mm] [kg] [kN] [kN]

3 3,70 7,3 6,30 100830 100840

4 5,70 11,1 9,60 100831 100841

5 9,50 18,7 16,10 100832 100842

6 14,80 29,1 25,10 100833 100843

8 25,00 49,3 42,40 100834 100844


1770 N/qmm

electric pulleys, reels


14

Special ropes WBS8-strand, pre-moulded, cross winding, SZ, impregnated, whole steel ropes

Rope Weigth Calculated Minimal Art. no.diameter 100 m breaking value braking value glossy[mm] [kg] [kN] [kN]

10 40,8 88,4 69,1 100900

11 49,3 107,0 83,6 100901

12 58,7 127,0 99,5 100902

13 70,8 153,0 120,0 100903

14 82,1 178,0 139,0 100904

15 94,2 204,0 160,0 100905

16 107,0 233,0 182,0 100906

17 121,0 262,0 205,0 100907

18 136,0 294,0 230,0 100908

19 151,0 328,0 256,0 100909

20 168,0 363,0 284,0 100910

22 203,0 440,0 344,0 100911

Information:Special ropes WBS:8-strand, pre-moulded special ropes.Whole steel rope with superior wear resistance. This is ensured by sturdy and powerful wires that are on the surface of the rope. Guaranteed by results of many years usage.

lifting ropes, ropes forexcavators andscrapers


1960 N/qmm


15

Special lifting rope PKT 357 zZ1960 N/qmm, direct winding, zZ, nontwisting, whole steel rope,impregnated, zinc-coated

Rope Total Weigth Calculated Minimal Art. no.diameter cross- 100 m breaking value breaking value

section[mm] [mm2] [kg] [kN] [kN]

8 32,76 29,5 64,2 49, 4 107963

9 41,23 37,3 80,8 62,2 107964

10 50,90 46,1 99,7 76,8 107965

11 61,59 55,7 120,7 92,9 107966

12 73,30 66,3 143,7 111,0 107967

13 86,02 77,9 168,6 130,0 107968

14 99,76 90,3 195,5 150,0 107969

15 114,50 104 224,4 173,0 107970

16 130,30 118 255,4 197,0 107971

18 164,90 149 323,2 249,0 107972

19 184,20 166 361,0 278,0 107973

20 204,10 184 400,0 308,0 107974

22 246,96 223 484,0 372,0 107975

Information:Direct left-handed winding (sS)can be delivered on order.

autocranes,transportable cranes,tower gantries,electric pulleys,bridge cranes,drilling device


1960 N/qmm

Special rope Stratoplastwith plastic interlayer, cross winding, sZ

Rope Total Weigth Calculated Minimal Calculated Minimal Art. no. Art. no.diameter cross- 100 m breaking value breaking value breaking value breaking value 1770 N/qmm 1960 N/qmm

section 1770 N/qmm 1770 N/qmm 1960 N/qmm 1960 N/qmm glossy glossy[mm] [mm] [kg] [kN] [kN] [kN] [kN]

8 30,6 27,3 54,2 47,2 60,1 52,3 101350 101380

9 38,8 34,5 68,6 60,0 76,0 66,4 101351 101381

10 48,8 43,4 86,4 74,0 95,6 82,0 101352 101382

11 59,6 53,0 105,4 88,5 116,8 98,0 101353 101383

12 68,3 60,8 120,8 106,6 133,8 118,0 101354 101384

13 81,7 72,7 144,6 125,5 160,1 138,9 101355 101385

14 95,1 84,6 168,3 144,6 186,4 160,1 101356 101386

15 110,8 98,6 196,1 166,3 217,2 184,1 101357 101387

16 125,4 111,6 222,0 189,0 245,8 209,3 101358 101388

17 140,3 124,8 248,2 211,5 274,9 234,2 101359 101389

18 157,7 140,4 279,2 239,8 309,2 265,5 101360 101390

19 178,6 159,0 316,1 264,5 350,0 292,9 101361 101391

20 198,2 176,4 350,7 295,3 388,4 327,0 101362 101392

21 217,1 193,2 384,3 324,2 425,5 359,0 101363 101393

22 245,4 218,4 434,4 356,2 481,0 394,5 101364 101394

23 258,1 229,7 456,8 386,8 505,9 428,3 101365 101395

24 280,0 249,2 495,6 423,4 548,8 468,9 101366 101396

floating grabs,gantry cranes,shelf conveyors,adjustable rope,fasting rope,lifting rope


1770 N/qmm 1960 N/qmm

Information:Stratoplast can be deliveredwith cross winding and withdirect winding.

Stratoplast must not be usedwith a revolving carabiner.


16

Wire ropes from premium steel1 x 19, material no. 1.4401 Rope Weigth Calculated Minimal Art. no.

diameter 100 m breaking value breaking value[mm] [kg] [kN] [kN]

1 0,50 0,93 0,82 102100

1,5 1,12 2,11 1,86 102101

2 2,00 3,75 3,30 102102

2,5 3,06 5,86 5,15 102103

3 4,50 8,43 7,42 102104


1570 N/qmm

7 x 7, cross winding, sZ, material no. 1.4401

Rope Weigth Calculated Minimal Art. no.diameter 100 m breaking value breaking value[mm] [kg] [kN] [kN]

1,25 0,58 1,03 0,89 102120

1,5 0,89 1,52 1,31 102121

2 1,71 2,70 2,26 102122

2,5 2,58 4,40 3,78 102123

3 3,85 6,03 5,05 102124

4 7,00 10,80 8,98 102125


1570 N/qmm


1570 N/qmm

Wire ropes from premium steel7 x 19, cross winding, sZ, material no. 1.4401

Rope Weigth Calculated Minimal Art. no.diameter 100 m breaking value breaking value[mm] [kg] [kN] [kN]

2 1,60 2,74 2,36 102140

2,5 2,40 4,22 3,63 102141

3 3,40 5,84 4,66 102142

3,5 5,04 8,63 7,42 102143

4 6,09 10,40 8,34 102144

5 9,52 16,30 13,00 102145

6 13,80 23,40 18,70 102146

8 24,30 41,70 33,30 102147

10 38,10 65,10 52,10 102148

12 54,80 92,20 79,30 102149

Recommendation:Ropes and strands from premium steelcan be delivered with plastic cover. Theycan be delivered on order.

8Nichtrostende Drahtseile

für technische Ästhetik

Katalog 8 - Aesthetic ropes,on order!


17

Ropes of round strandszinc-coated, sZ, with plastic cover

Rope Outer Weigth Construction Calculated Minimal Art. no.diameter diameter 100 m breaking value breaking value[mm] [mm] [kg] [kN] [kN]

1,1 2 1,5 4 x 3 + FC (FE) 0,8 0,7 102000

2 3 1,9 6 x 7 + FC (FE) 2,6 2,3 102001

2,5 3,5 2,7 6 x 7 + FC (FE) 4,2 3,8 102002

3 4 3,8 6 x 7 + FC (FE) 5,8 5,2 102003

3 5 5,0 6 x 7 + FC (FE) 5,8 5,2 102004

4 5 8,0 6 x 7 + FC (FE) 10,5 9,4 102005

4 6 9,0 6 x 7 + FC (FE) 10,5 9,4 102006

5 7 11,0 6 x 7 + FC (FE) 16,3 14,7 102007

6 8 16,0 6 x 7 + FC (FE) 23,5 21,1 102008

8 10 25,0 6 x 19 + FC (FE) 40,5 34,8 102009

10 12 40,0 6 x 19 + FC (FE) 63,3 54,4 102010

12 14 60,0 6 x 19 + FC (FE) 91,1 78,3 102011

with clear PVC cover

Rope Outer Weigth Construction Calculated Minimal Art. no.diameter diameter 100 m breaking value breaking value[mm] [mm] [kg] [kN] [kN]

3 5 5,0 6 x 7 + FC (FE) 5,8 5,2 102020

3 8 9,0 6 x 7 + FC (FE) 5,8 5,2 102021

4 5 9,0 6 x 7 + FC (FE) 10,5 9,4 102022

4 6 9,0 6 x 7 + FC (FE) 10,5 9,4 102023

with red PVC cover

Notice:We can also deliver covers of polyamide, polypropylene andpolyethylene.


1770 N/qmm

multi-proposeropes for workshopand industry


18


Rope thimblesaccording to EN 13411-1* (formerly DIN 3090), material: St 37-2design: galvanized, zinc-coated to the size 6,fire resistant from the size 8, the size is marked

Size RW c l s Weigth Art. no.number per 100 pcs

[mm] [mm] [cca. mm] [mm] [cca. kg]

4 5 10 20 2,1 1,4 120030

6 7 15 30 2,6 3,0 120031

8 9 20 40 4 7,8 120032

10 11 25 50 5 15,8 120033

12 13 30 60 6 23,7 120034

14 16 35 70 7 33,5 120035

16 18 40 80 8 48,0 120036

18 20 45 90 9 65,0 120057

20 22 50 100 10 95,0 120038

22 24 55 110 10 108,0 120039

24 26 60 120 11 132,0 120040

Rope thimblesaccording to DIN 65457 (formerlyA DIN 6899), Material: St 2design: galv. zinc-coated to RW 8, fire-resistant zinc-coat from RW 9

ID Size RW c l s Weigth Art. no.number number per 100 pcs


25 Z 2,5 3 10 21,5 0,5 0,154 120001

- 3 * 3,5 11 23,5 0,75 0,292 120002

35 Z 3,5 4 12 26,5 0,75 0,352 120003

40 Z 4 5 13 28,5 0,75 0,432 120004

50 Z 5 6 14 30 1 0,686 120005

60 Z 6 7 15 33 1 0,798 120006

70 Z 7 8 16 35 1 1,010 120007

80 Z 8 9 18 39 1,25 1,600 120008

90 Z 9 10 20 43 1,25 1,980 120009

100 Z 10 11 22 47,5 1,5 2,950 120010

The size corresponds with diameter of a rivet. These sizes are not included in the norm DIN 65457.

Nylon thimbles

RW c l Weigth Art. no.per 100 pcs

[mm] [mm] [mm] [cca. kg]

3 6 9 0,04 120600

4 9 13 0,06 120601

6 12 18 0,18 120602

7 14 21 0,27 120603

9 20 29 0,46 120604

12 24 42 1,00 120605

13 26 45 1,26 120606

16 30 49 1,70 120607

18 36 53 2,80 120608

19


Special thimblesfrom the material formerly B DIN 6899,with special size of eyes material: St 2 bis RW 16, St 37-2 ab RW 18design: fire-resistant

RW c * l s Weigth Art. no.per 100 pcs


8 25 45 2,8 4,5 120620

8 30 54 2,8 5 120621

8 35 58 2,8 5,3 120622

10 30 51 3,1 5,8 120623

10 35 56 3,1 6,3 120624

10 40 65 3,1 7 120625

12 35 60 3,3 9,5 120626

12 40 66 3,3 10,5 120627

12 45 72 3,3 11,5 120628

13 35 60 3,3 10 120629

13 40 66 3,3 11 120630

13 45 72 3,3 12 120631

14 40 64 3,7 13,5 120632

14 45 71 3,7 15 120633

14 50 80 3,7 16 120634

16 40 63 3,8 16 120635

16 50 78 3,8 20 120636

16 60 97 3,8 22 120637

18 50 76 4,7 22 120638

18 60 93 4,7 27 120639

18 65 104 4,7 29 120640

20 60 95 5,7 37 120641

20 65 104 5,7 38 120642

20 70 109 5,7 43 120643

22 60 95 5,7 38 120644

22 70 104 5,7 44 120645

22 80 109 5,7 46 120646

24 70 117 6,5 57 120647

24 80 133 6,5 66 120648

24 90 140 6,5 70 120649

26 80 130 6,8 72 120650

26 100 155 6,8 82 120651

RW c ** l s Weigth Art. no. Art. no.per 100 pss import

[mm] [mm] [cca. mm] [mm] [cca. kg] quality

3 12 19 1,6 0,5 120250 120060

4 13 21 1,6 0,8 120251 120061

5 14 23 1,9 1 120252 120062

6 16 25 2,4 1,6 120253 120063

7 18 28 2,4 1,9 120254 120064

8 20 32 2,8 3 120255 120065

10 24 38 3,1 4,7 120256 120066

12 28 45 3,3 6,8 120257 120067

13 30 48 3,3 7,5 120258 120068

14 32 51 3,7 10 120259 120069

16 36 58 3,8 14,5 120260 120070

17 38 61 3,8 18 120261 120071

18 40 64 4,7 19 120262 120072

20 45 72 5,7 29 120263 120073

22 50 80 5,7 32 120264 120074

24 56 90 6,5 50 120265 120075

26 62 99 6,8 59 120266 120076

28 70 112 8 82 120267 120077

30 75 120 8 100 120268 120078

32 80 128 8 130 120269 120079

34 95 152 8,5 160 120270 120080

36 100 160 8,5 170 120271 120081

38 110 176 8,5 180 120272 120082

40 115 184 10,5 275 120273 120083

Thimblesaccording to EN 13411-1* (formerly DIN 6899 typeBF), formerly B DIN 6899material: St 2 to RW 17, St 37-2 from RW 18design: galv. zinc-coated to RW 6, fire-resistantfrom RW 7

* The size correspondswith the diameter of a rivet

* The size correspondswith the diameter of a rivet

20


Whole - poured thimblesaccording to DIN 3091size 8-14 without the cutmaterial: size 8-36 = GTW 40 DIN 1692

size 40-80 = GGG DIN 1693tolerance for pouring for all sizes:

GTA 17 according to DIN 1684 part 1 conical formaccording to DIN 1511 for GTW-40

GTB 17 according to DIN 1685 part 1 conical formaccording to DIN 1511 for GGG-40

design: raw

Size a b d1 d1 c l Weigth Art. no. Art. no.of rope ≈ neat drilling per pieceØ (not machined) possible to d1 raw d1 drilled

[mm] [mm] [cca. mm] [max. mm] [mm] [mm] [cca. kg] stuff

8 9 15 14 20 40 66 0,181 120180 120200

10 11 17,5 18 25 50 82 0,318 120181 120201

12 13 20 21 30 60 98 0,515 120182 120202

14 16 23,5 25 35 70 114 0,799 120183 120203

16 18 26 28 40 80 130 0,895 120184 120204

18 20 28,5 31 45 90 145 1,211 120185 120205

20 22 31 35 50 100 161 1,61 120186 120206

22 24 33,5 38 55 110 177 2,11 120187 120207

24 26 36 41 60 120 193 2,71 120188 120208

26 29 39,5 44 65 130 209 3,55 120189 120209

28 31 42 47 70 140 224 4,2 120190 120210

32 35 47 53 80 160 256 6,3 120191 120211

Rope clampsaccording to EN 13411-5* (formerly DIN 1142)material: tightening jaw, GTW 40 DIN 1692

tightening clamp, 6.8 according to DIN 267 page 3nut with cone, 6 according to DIN 267 page 4

design: tightening jaw, galvanized, zinc-coated and passivationedtightening clamp, galvanized, zinc-coated and yellow passivationednut with cone, galvanized, zinc-coated

Size a b1 b2 d h1 h2 l Weigth Art. no.of rope per pieceØ

[mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

5 13 7 13 M 5 25 13 25 2,1 120300

6,5 17 8 16 M 6 32 14 30 4,0 120301

8 20 10 20 M 8 41 18 39 8,2 120302

10 24 12 20 M 8 46 21 40 9,2 120303

13 30 15 28 M 12 64 29 55 27,5 120304

16 35 18 32 M 14 76 35 64 43,0 120305

19 36 22 32 M 14 83 40 68 49,0 120306

22 40 24 34 M 16 96 44 74 68,0 120307

26 50 26 38 M 20 111 51 84 117,0 120308

30 55 34 41 M 20 127 59 95 140,0 120309

34 60 38 45 M 22 141 67 105 213,0 120310

40 65 44 49 M 24 159 77 117 268,0 120311

21


Usage of rope clamps DIN 1142 (lift)First rope clamp will be fixed to the thimble.Rope clamps must be at such distance, that there can begaps between them. The gaps must be as wide as the width of a rope clamp.Tightening jaws must be fixed at the non-strained ends of rope.

To use it as a binding means, it is necessary to pay attention to the DIN 3088 (ff)! normStrength and number of rope clamps

Size Needed tractive Needed pulling strenth Needed number torque in the thread of rope clamp of clampNm Nm* N (*)

5 2,0 2,2 2300 3 5

6,5 3,5 3,85 3200 3 5

8 6,0 6,60 4700 4 6

10 9,0 9,90 7100 4 6

13 33,0 36,30 15400 4 6

16 49,0 53,90 21000 4 6

19 67,7 74,47 28900 4 6

22 107,0 117,70 40800 5 7

26 147,0 161,70 47600 5 7

30 212,0 233,20 62300 6 8

34 296,0 325,60 79200 6 8

40 363,0 399,30 89800 6 8*When using a spiral rope

Mentioned tractive moments don’t only hold for lubricated threads and nuts.When assembling, it is necessary to draw close the nuts with the cone according to the specifiedtightening torque. After the first loading of the clamp with a burden, it is necessary to check thetightening torque again. Binding ropes with rope clamps DIN 1142 are designed for one time use!

Rope clampformerly DIN 741,Design: zinc-coated

Size- a b1 b2 d h1 h2 l Weigth Art. no.Rope-Ø per

100 pcs[Zoll] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

1 / 8 3 12 4 10 M 4 20 10 21 0,7 120330

3 / 16 5 13 6 11 M 5 24 10 23 1,5 120331

1 / 4 6,5 15 8 12 M 5 28 11 26 1,9 120332

5 / 16 8 19 9 14 M 6 34 15 30 3,2 120333

3 / 8 10 22 11 18 M 8 42 17 34 6,6 120334

7 / 16 11 22 12 19 M 8 44 18 36 7,1 120335

1 / 2 13 30 14 23 M 10 55 21 42 12,5 120336

9 / 16 14 30 15 23 M 10 57 22 44 14,0 120337

5 / 8 16 33 17 26 M 12 63 26 50 20,5 120338

3 / 4 19 38 20 29 M 12 75 30 54 30,8 120339

7 / 8 22 44 23 33 M 12 85 34 61 35,7 120340

1 26 45 27 35 M 16 95 37 65 56,9 120341

Reminder:These rope clamps are notpermitted as lifting and bindinginstrument!

22


Stainless rope clampmaterial: resistant to rust and acids design: polished

Size b b1 b2 d h1 h2 l Weigth Art. no.of rope-Ø per piece[mm] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

2 10 4 15 M 3 17 10 14 0,01 120360

3 12 5 15 M 3 21 12 16 0,01 120361

4 13 6 18 M 4 23 13 18 0,02 120362

5 14 7 21 M 5 27 16 20 0,03 120363

6 18 8 23 M 6 32 18 27 0,04 120364

8 22 10 28 M 8 41 20 34 0,08 120365

10 27 12 36 M 10 51 23 44 0,15 120366

12 33 14 38 M 12 62 27 50 0,23 120367

Stainless thimblematerial: resistant to rust and acidsdesign: polished

RW c l s Weigth Art. no.per 100 pcs


3 10 18 1 0,4 120150

4 11 20 1 0,5 120151

5 13 21 1 0,6 120152

6 16 28 1,2 1,0 120153

7 17 31 1,2 1,2 120154

8 19 33 1,4 1,8 120155

10 24 38 1,9 2,9 120156

12 27 42 2 4,6 120157

23


Turnbuckleaccording to DIN 1480with hook and eyematerial: St 37design: zinc-coated

Size of l1 l2 b e f m Weigth Art. no.thread Ø per piece


M 5 50 30 8 43 43 7 0,030 120500

M 6 110 86 10 84 72 8 0,105 120501

M 8 110 80 11 81 73 9 0,145 120502

M 10 125 89 14 96 88 11 0,280 120503

M 12 125 83 15 97 110 14 0,420 120504

M 14 140 96 18 125 118 14 0,550 120505

M 16 170 116 25 171 145 16 1,000 120506

M 20 200 132 25 168 173 18 1,600 120507

M 22 225 153 29 190 182 23 2,100 120508

M 24 255 177 34 192 187 25 2,000 120509

M 30 255 165 34 220 230 33 3,900 120510

M 33 295 185 40 245 225 34 5,800 120511

M 36 295 185 48 275 260 36 7,100 120512

Turnbuckleaccording to DIN 1480with 2 hooks material: St 37design: zinc-coated

Size of l1 l2 e m Weigth Art. no.thread Ø per piece

[mm] [mm] [mm] [mm] [cca. kg]

M 5 50 30 43 7 0,030 120530

M 6 110 86 84 8 0,105 120531

M 8 110 80 81 9 0,145 120532

M 10 125 89 96 11 0,280 120533

M 12 125 83 97 14 0,420 120534

M 14 140 96 125 14 0,550 120535

M 16 170 116 171 16 1,000 120536

M 20 200 132 168 18 1,600 120537

M 22 225 153 190 23 2,100 120538

M 24 255 177 192 25 2,000 120539

M 30 255 165 220 33 3,900 120540

M 33 295 185 245 34 5,800 120541

M 36 295 185 275 36 7,100 120542

24


Turnbuckleaccording to DIN 1480with 2 eyesmaterial: St 37design: zinc-coated

Size of l1 l2 b f Weigth Art. no.thread Ø per piece


M 5 50 30 8 43 0,030 120560

M 6 110 86 10 72 0,105 120561

M 8 110 80 11 73 0,145 120562

M 10 125 89 14 88 0,280 120563

M 12 125 83 15 110 0,420 120564

M 14 140 96 18 118 0,550 120565

M 16 170 116 25 145 1,000 120566

M 20 200 132 25 173 1,600 120567

M 22 225 153 29 182 2,100 120568

M 24 255 177 34 187 2,000 120569

M 30 255 165 34 230 3,900 120570

M 33 295 185 40 225 5,800 120571

M 36 295 185 48 260 7,100 120572

Turnbuckleaccording to DIN 1480with 2 eyes welded onmaterial: St 37design: raw

Size of l1 l2 l3 Weigth Art. no.thread-Ø per piece


M 6 110 86 120 0,105 120580

M 8 110 80 120 0,145 120581

M 10 125 89 150 0,320 120582

M 12 125 83 150 0,440 120583

M 14 140 96 175 0,630 120584

M 16 170 116 200 1,060 120585

M 20 200 132 220 1,680 120586

M 22 225 153 240 2,270 120587

M 24 255 177 260 2,900 120588

M 27 255 165 260 3,800 120589

M 30 255 165 260 4,100 120590

M 33 295 185 300 6,300 120591

M 36 295 185 300 7,200 120592

25


Metal - tipped clampsbolt with eye, standard design, straight for, clamp and plug have the samediameter, design: zinc-coated

Size * Carrying cap. at d1 d2 d3 b1 h1 Weigth Art. no.5-tuple lock-out per piece

[inches] [kg] [mm] [mm] [mm] [mm] [mm] [cca. kg] straight form

3 / 16 80 5 5 11 10 20 0,02 121000

1 / 4 100 6 6 14 14 25 0,03 121001

5 / 16 200 8 8 18 16 32 0,07 121002

3 / 8 320 10 10 20 24 40 0,13 121003

7 / 16 400 11 11 22 22 46 0,17 121004

1 / 2 500 12 12 26 24 51 0,24 121005

9 / 16 600 14 14 29 29 59 0,35 121006

5 / 8 800 16 16 33 32 69 0,50 121007

3 / 4 1100 19 19 41 38 83 0,80 121008

7 / 8 1500 22 22 50 44 93 1,30 121009

1 2000 25 25 58 45 93 2,00 121010

1 1 / 8 3000 28 28 66 56 117 3,00 121011

1 1 / 4 4000 32 32 73 53 122 4,30 121012

1 1 / 2 5000 38 38 85 76 150 6,75 121013

* It isn’t permitted to be used like a binding and lifting instrument. It is not possible to display test certificate.

Metal - tipped clampsbolt with eye, standard design, omega form, clamp and plug have the samediameter, design: zinc-coated

Size * Carrying cap at d1 d2 d3 b1 b2 h1 Weigth Art. no.5-tuple lock out per ks

[inches] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] omega

3 / 16 80 5 5 11 10 16 20 0,02 121020

1 / 4 100 6 6 14 14 20 25 0,03 121021

5 / 16 200 8 8 18 16 24 32 0,07 121022

3 / 8 320 10 10 20 24 32 40 0,13 121023

7 / 16 400 11 11 22 22 34 46 0,18 121024

1 / 2 500 12 12 26 24 38 51 0,26 121025

9 / 16 600 14 14 29 29 44 59 0,35 121026

5 / 8 800 16 16 33 32 56 69 0,50 121027

3 / 4 1100 19 19 41 38 66 83 0,80 121028

7 / 8 1500 22 22 50 44 72 93 1,30 121029

1 2000 25 25 58 45 69 93 2,00 121030

1 1 / 8 3000 28 28 66 56 93 117 3,00 121031

1 1 / 4 4000 32 32 73 53 86 122 4,30 121032

1 1 / 2 5000 38 38 85 76 125 150 7,00 121033

26


Reminder:For binding and lifting means, pleaseuse clamps type WV.

Clampsaccording to DIN 82101, material: R St 42-2, design: zinc-coated, form A with eye

Size Carrying d1 d2 d3 d4 d5 b1 h1 Weigth Art. no.cap. per piece

[Form A] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] Form A

0,1 100 4 5 10 M 5 5 7 15,5 0,02 121040

0,16 160 5 6 12 M 6 6 8 18 0,02 121041

0,25 250 7 8 16 M 8 8 11 24 0,05 121042

0,4 400 8 10 20 M 10 10 14 30 0,09 121043

0,6 630 10 12 24 M 12 12 17 36 0,17 121044

1 1000 13 16 32 M 16 15 21 49 0,36 121045

1,6 1600 17 20 40 M 20 19 27 61 0,75 121046

2 2000 19 22 44 M 22 21 30 67 1,00 121047

2,5 2500 21 24 48 M 24 23 33 73 1,32 121048

3 3150 24 27 54 M 27 26 38 83,5 1,85 121049

4 4000 27 30 60 M 30 29 42 91 2,50 121050

5 5000 30 36 72 M 36 33 47 111 4,00 121051

6 6300 34 39 78 M 39 37 53 119,5 5,40 121052

8 8000 38 45 90 M 45 41 60 139,5 7,90 121053

10 10000 42 48 96 M 48 45 66 147 10,00 121054

12 12500 47 52 104 M 52 50 73 158 13,50 121055

16 16000 52 60 120 M 60 55 81 185 19,20 121056

20 20000 58 68 136 M 68 61 90 211 28,00 121057

25 25000 63 72 144 M 72 67 100 221 34,00 121058

d

d3

5

Clampsaccording to DIN 82101, material: R St 42-2, design: zinc-coated, form C with protruding plug, nut and snap.

Size Carrying d1 d2 d3 d4 d5 b1 h1 Weigth Art. no.cap. per piece

[Form A] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] Form C

0,4 400 8 10 20 M 10 10 14 30 0,10 121070

0,6 630 10 12 24 M 12 12 17 36 0,18 121071

1 1000 13 16 32 M 16 15 21 49 0,39 121072

1,6 1600 17 20 40 M 20 19 27 61 0,80 121073

2 2000 19 22 44 M 22 21 30 67 1,08 121074

2,5 2500 21 24 48 M 24 23 33 73 1,40 121075

3 3150 24 27 54 M 27 26 38 83,5 2,00 121076

4 4000 27 30 60 M 30 29 42 91 2,70 121077

5 5000 30 36 72 M 36 33 47 111 4,30 121078

6 6300 34 39 78 M 39 37 53 119,5 5,80 121079

8 8000 38 45 90 M 45 41 60 139,5 8,50 121080

10 10000 42 48 96 M 48 45 66 147 10,80 121081

12 12500 47 52 104 M 52 50 73 158 14,40 121082

16 16000 52 60 120 M 60 55 81 185 20,50 121083

20 20000 58 68 136 M 68 61 90 211 29,50 121084

25 25000 63 72 144 M 72 67 100 221 36,00 121085

b

h

d

d

1

1

1

4d2

d

d3

5

27


High - strength clampfor all possibilities of usage, type HA 1 straight form, with screwed plugdesign: fire-resistant zinc-coated, plug: fire-resistant, zinc-coated(from the size 5/16 to 7/16 galv. zinc-coated) and varnished,carrying capacity and size marked.

Size Carrying cap at d1 d2 d3 d4 b1 h1 Weigth Art. no.5-tuple lock out per piece

[inches] [kg] [mm] [mm] [mm] [Zoll] [mm] [mm] [cca. kg] Type HA 11 / 4 - - - - - - - - -5 / 16 750 8 10 21 3 / 8 13 26 0,08 1211303 / 8 1000 10 11 25 7 / 16 16 31 0,13 1211317 / 16 1500 11 13 27 1 / 2 18 36 0,19 1211321 / 2 2000 13 16 30 5 / 8 21 41 0,31 1211335 / 8 3250 16 19 40 3 / 4 27 51 0,55 1211343 / 4 4750 19 22 48 7 / 8 32 60 0,96 1211357 / 8 6500 22 25 54 1 36 71 1,40 121136

1 8500 25 29 60 1 1 / 8 43 81 2,03 121137

1 1 / 8 9500 29 32 67 1 1 / 4 46 90 2,97 121138

1 1 / 4 12000 32 35 76 1 3 / 8 52 100 4,01 121139

1 3 / 8 13500 35 38 84 1 1 / 2 57 113 5,40 121140

Type HC 1 straight form,crosscutting plug, nut and snap, design: fire-resistant, fire-resistant andvarnished plug, carrying capacity and size marked.

Size. Carrying cap at d1 d2 d3 d4 b1 h1 Weigth Art. no.5-tuple lock out per piece

[inches] [kg] [mm] [mm] [mm] [Zoll] [mm] [mm] [cca. kg] Type HC 11 / 2 2000 13 16 30 5 / 8 21 41 0,34 1211105 / 8 3250 16 19 40 3 / 4 27 51 0,70 1211113 / 4 4750 19 22 48 7 / 8 32 60 1,18 1211127 / 8 6500 22 25 54 1 36 71 1,64 121113

1 8500 25 29 60 1 1 / 8 43 81 2,41 121114

1 1 / 8 9500 29 32 67 1 1 / 4 46 90 3,27 121115

1 1 / 4 12000 32 35 76 1 3 / 8 52 100 4,59 121116

1 3 / 8 13500 35 38 84 1 1 / 2 57 113 6,00 121117

1 1 / 2 17000 38 41 92 1 5 / 8 60 124 8,33 121118

1 3 / 4 25000 44 51 110 2 73 146 12,83 121119

2 35000 51 57 127 2 1 / 4 83 171 18,50 121120

2 1 / 2 55000 63 70 152 2 3 / 4 105 203 38,03 121121

High - strenght clampfor all possibilities of usage, type HA 2 omega form, with screwed plug, design:fire-resistant zinc-coated, plug: fire-resistant, zinc-coated, (from the size 1/4 to7/16 galv. zinc-coated) and varnished, carrying capacity and size marked.

Size Carrying cap at d1 d2 d3 d4 b1 b2 h2 Weigth Art. no.5-tuple lock out per piece

[inches] [kg] [mm] [mm] [mm] [Zoll] [mm] [mm] [mm] [cca. kg] Type HA 21 / 4 500 6,5 8 17 5 / 16 12 20 28 0,05 1211505 / 16 750 8 10 21 3 / 8 13 21 31 0,08 1211513 / 8 1000 10 11 25 7 / 16 16 26 36 0,14 1211527 / 16 1500 11 13 27 1 / 2 18 29 42 0,22 1211531 / 2 2000 13 16 30 5 / 8 21 33 48 0,33 1211545 / 8 3250 16 19 40 3 / 4 27 43 60 0,65 1211553 / 4 4750 19 22 48 7 / 8 32 51 71 0,97 1211567 / 8 6500 22 25 54 1 36 58 84 1,52 121157

1 8500 25 29 60 1 1 / 8 43 68 95 2,39 121158

1 1 / 8 9500 29 32 67 1 1 / 4 46 74 108 3,15 121159

1 1 / 4 12000 32 35 76 1 3 / 8 52 82 119 4,32 121160

1 3 / 8 13500 35 38 84 1 1 / 2 57 92 133 5,67 121161

28


Reminder:Also ask for our lifting devices .

Ask number 5 catalogue!

Size Carrying cap at d1 d2 d3 d4 b1 b2 h2 Weigth Art. no.5-tuple lock out per piece

[inches] [kg] [mm] [mm] [mm] [Zoll] [mm] [mm] [mm] [cca. kg] Type HC 2

1 / 2 2000 13 16 30 5 / 8 21 33 48 0,37 121170

5 / 8 3250 16 19 40 3 / 4 27 43 60 0,71 121171

3 / 4 4750 19 22 48 7 / 8 32 51 71 1,27 121172

7 / 8 6500 22 25 54 1 36 58 84 1,78 121173

1 8500 25 29 60 1 1 / 8 43 68 95 2,52 121174

1 1 / 8 9500 29 32 67 1 1 / 4 46 74 108 3,53 121175

1 1 / 4 12000 32 35 76 1 3 / 8 52 82 119 5,04 121176

1 3 / 8 13500 35 38 84 1 1 / 2 57 92 133 6,84 121177

1 1 / 2 17000 38 41 92 1 5 / 8 60 98 146 8,78 121178

1 3 / 4 25000 44 51 110 2 73 127 178 14,09 121179

2 35000 51 57 127 2 1 / 4 83 146 197 20,84 121180

2 1 / 2 55000 63 70 152 2 3 / 4 105 184 267 42,30 121181

Type HC 2 omega form, crosscutting plug, nut and snap, design: fire-resistant zinc-coated, plug: fire-resistant, zinc-coated andvarnished, carrying capacity and size marked

Connecting clamp WVform C, with nut and snap, high-strenght, red varnished,permitted as a binding and lifting mean.

Type Carrying a b c d Ø e t Weigth Art. no.cap per piece[kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

WV 6 1120 13,5 30 10 10 20 29 0,10 130179

WV 8 2000 17 39 13 12 24 35 0,18 130180

WV 10 3150 23 49 15 16 31 49 0,37 130181

WV 13 5300 27 61 19 20 37 61 0,78 130182

WV 16 8000 34 76 24 24 47 73 1,44 130183

WV 18 10000 40 88 27 27 56 84 2,20 130184

WV 22 15000 48 108 33 36 72 112 4,20 130185

WV 26 21200 53 121 37 39 78 119 6,20 130186

WV 28 25000 60 136 41 45 90 139 9,88 130187

WV 32 31500 66 150 45 48 96 149 10,80 130188

WV 36 40000 73 167 50 52 104 158 13,70 130189

29

Notice:Our SIKA hooks correspond withsafety requirements DIN 7541and they are permitted for wirerope slings use according to DIN3088.


SIKA - hook(SIKA=safety-carabiner-hook with eye)with stable and safety lockdesign: green varnishedlock: zinc-coated

Size Number Carrying cap. b d l m s t Weigth Art. no.per piece

[kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

0,5 17 500 25 10 130 20 20 93 0,5 121260

0,63 18 630 26 10 133 22 21 95 0,6 121261

1 20 1000 27 13 147 26 24 105 0,8 121262

1,25 21 1250 28 13 149 24 24 109 0,9 121263

1,6 22 1600 28 14 160 28 25 115 1,0 121264

2 23 2000 32 14 169 29 28 123 1,1 121265

2,5 24 2500 34 16 190 34 29 137 1,5 121266

3,2 25 3200 34 17 195 34 30 138 1,6 121267

4 26 4000 40 20 227 40 34 164 2,8 121268

5 27 5000 50 23 255 45 38 188 3,6 121269

6,3 28 6300 52 24 288 50 39 213 4,5 121270

8 29 8000 54 26 299 57 39 216 5,4 121271

10 30 10000 60 34 329 61 45 234 8,1 121272

SIKA - special hooktype SPSwith stable and safety lock,special reduced hook body design: green varnishedlock: zinc-coated

Size Number Carrying cap. b d l m s t Weigth Art. no.per piece


0,5 17 500 24 12 118 20 12 92 0,3 121280

1 20 1000 24 12 124 20 18 93 0,5 121281

1,6 22 1600 26 13 140 24 18 105 0,6 121282

2 23 2000 26 13 141 24 18 107 0,6 121283

Rope sliding hookwith safety lock, material: according to DIN 17115, design: red varnished, lock: zinc-coated

Size Rope-Ø Carrying b d l m Weigth Art. no.capacity per piece

[inch] [mm] [kg] [mm] [mm] [mm] [mm] [cca. kg]

D/i - B/c 9-13 1250 70 17 128 19 0,7 121330

F/i 14-16 2000 80 22 147 22 1,0 121331

D/e 17-19 3000 103 27 174 30 1,8 121332

H/i - 1 20-26 5000 133 33 210 40 3,4 121333

D/i - B/c 9-13 1250 70 17 128 25 0,1 121340

F/i 14-16 2000 80 22 147 28 1,0 121341

D/e 17-19 3000 103 27 174 36 1,8 121342

H/i - 1 20-26 5000 133 33 210 47 3,4 121343

without safety lock

30


Excavator hook, type ASHfor welding, powdered surfaces,univerzal hook usable for excavators,wheeledloaders, wrought, powdered surfacesafety shackle, backward spring fromstainless steel,design: orange/red varnished

Carrying cap. B C D E F H Weigth Art. no.per piece


1000 25 24 6 76 90 22 0,40 141306

3000 35 29 8 105 130 28 1,25 141307

5000 45 37 10 132 160 47 2,35 141308

8000 50 47 10 138 170 50 3,60 141309

Fire carabinerdesign: galvanized iron

Size b d l m w Weigth Art. no.100 pcs


40 x 4 6 4 40 6 4 1,0 121490

50 x 5 8 5 50 7 4 1,3 121491

60 x 6 9 6 60 8 5 2,7 121492

70 x 7 10 7 70 8 8 4,3 121493

80 x 8 10 8 80 9 8 6,4 121494

90 x 9 12 9 90 10 9 8,8 121495

100 x 10 15 10 100 11 10 12,6 121496

120 x 11 18 11 120 16 11 19,0 121497

140 x 12 20 12 140 19 13 26,0 121498

160 x 13 22 13 160 25 15 35,0 121499

180 x 14 22 14 180 35 15 48,0 121500

200 x 15 22 15 200 35 16 62,0 121501

NIRO - stainless fire carabinermaterial: rust- and acid resistantdesign: polished stainless steel

Size b d l m w Weigth Art. no.100 pcs


50 x 5 8 5 50 7 4 1,7 121510

60 x 6 9 6 60 9 5 2,7 121511

70 x 7 11 7 70 8 8 4,5 121512

80 x 8 12 8 80 9 8 6,5 121513

100 x 10 15 10 100 12 10 13,0 121514

120 x 11 18 11 120 16 11 19,6 121515

140 x 12 21 12 142 23 17 27,2 121516

31


Rope lock (symmetric)according to EN 13411-7* (formerly DIN 15315)(Size 6,5 a 25 - 40 except norm)material:type of rope lock: NG 5 - 20 according to DIN 17100

NG 25 - 40 GS 60.3 according to DIN 1681

rope wedge: Ng 5, 6,5 a 25 - 40GTW-40 according to DIN 1692NG 8-20 GG 15/20 according to DIN 1691

design: zinc-coated

Size Rope-Ø b e s1 s2 h2 d r h1 w Weigth Art. no.per piece

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

5 4-5 12 14 3 - 110 10 12 68 19 0,17 121700

6,5 5-6,5 10 16 4,5 - 100 10 14 58 19 0,21 121701

8 6-8 14 20 4 - 150 12 18 92 25 0,50 121702

11 9-11 17 26 6 - 190 16 23 117 32 1,04 121703

14 12-14 22 32 8 - 230 18 28 141 38 2,07 121704

17 15-17 25 36 10 - 260 22 32 162 46 3,66 121705

20 18-20 27 40 12 - 300 25 35 186 52 5,35 121706

25 22-25 33 40 12 - 285 40 44 180 60 6,22 121707

Plug is delivered on order.

to size 11 from size 14

Wedging end terminal (asymmetric rope lock)relating to EN 13411-6* (formerly DIN 43148)material:case: rope Ø 12 - 14 - GTW-40 according to DIN 1692

rope Ø 12 - 15 - GTS-45 according to DIN 1692

rope Ø 16 - 20 - GS 26 CrMo 4according to StEW 510-62

wedge: GTW-40 dle DIN 1692design: zinc-coated

Size Carrying cap. b e s h2 d h1 w Weigth Art. no. = rope-Ø per piece

[mm] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

2- 4 100 8 8 3,5 58 7,5 37 12,5 0,06 121730

4- 5 250 12 18 5,5 96 12 67 16 0,30 121731

6- 7 500 14 20 6 130 14 85 30 0,75 121732

8 500 14 20 6 130 14 81 24 0,70 121733

9-12 500 14 20 6 130 14 76 20 0.65 121734

10-12 1000 17 23 7 140 17 81 24 0.82 121736

12-14 1000 17 23 7 140 17 76 20 0,78 121737

12-15 2500 20 30 10 190 20 107 36 2,56 121738

16-20 5500 24 35 12 238 25 136 49 5,00 121739

16-17 5500 24 35 12 185 25 148 56 5,00 121740

19-20 8000 29 38 17 238 25 161 52 7,30 121741

21-26 8000 30 45 18 325 33,5 210 81 11,40 121742

32


Chain emergency linkdesign: raw or zinc-coated

Size d l w Weigth Art. no. Art. no.100 pcs

[mm] [mm] [mm] [cca. kg] raw zinc-coated

3 3 15 6 0,32 121880 121890

4 4 20 7 0,73 121881 121891

5 5 23 9 1,44 121882 121892

6 6 28 10 2,13 121883 121893

7 7 33 12 3,72 121884 121894

8 8 37 14 5,45 121885 121895

9 9 38 19 7,65 121886 121896

10 10 38 17 9,80 121887 121897

12 12 52 19 18,30 121888 121898

Chain swift threaddesign: zinc-coated

GEWA - rope roller, type YR1-gorge, folding

Light building roller specified for fibre ropes, varnished

Size b d l w Weigth Art. no. 100 pcs


4 12 4 33 5,5 1,2 121900

5 12 5 39 6,5 2,1 121901

6 13 6 45 7,5 3,5 121902

7 16 7 53 8,5 5,7 121903

8 16 8 59 10 8,0 121904

10 20 10 70 12 14,8 121905

12 22 12 82 14 23,5 121906

Carrying cap. Rope- Scroll Proportion Proportion Art. no.Type Ø Ø A H Weigth

[t] [mm] [mm] [mm] [mm] [kg]

YR 1,0 1,0 07 105 305 118 03,3 141200

YR 2,0 2,0 13 190 425 199 08,9 141201

YR 3,2 3,2 15 220 496 230 15,5 141202

YR 6,4 6,4 18 260 655 270 26,5 141203

Carrying cap. Scroll-Ø Rope-Ø Heigth Weigth Art. no.per piece

[kg] [mm] [mm] [mm] [cca. kg]

200 160 26 270 2,3 122020

200 190 28 340 3,0 122021

250 220 28 385 3,6 122022

250 250 30 400 4,2 122023

33


Roller for wire ropesmade of cast iron or steel, no. 37center lathed, with casing

Roller-Ø Gorge Gorge Hole Center Center-Ø Weigth Art. no. Art. no.width depth length piece

[mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] cast iron steel

100 12 10 19 23 40 0,60 122030* 122050

125 14 11 22 24 48 0,90 122031* 122051

150 16 12 30 29 63 1,80 122032* 122052

175 19 15 40 40 70 3,20 122033 122053

cast iron

It can be supplied also with ball bearing.

* Selflubricating, without case, PA material (not in cast iron)

Roller for wire ropesmade of cast iron, size 16 draw gorge,side holes drilled

Roller-Ø for ropes Gorge Gorge Hole Center Center-Ø Weigth Art. no.Ø width depth heigth piece

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg]

60 6 6 6 11 16 32 0,18 122110

75 7 7 7 12 16 33 0,26 122111

90 8 9 9 14 20 36 0,40 122112

100 9 10 10 14 24 40 0,57 122113

120 10 11 11 19 30 46 0,95 122114

130 12 13 13 22 32 52 1,25 122115

150 14 15 15 25 35 54 1,60 122116

175 16 17 17 27 43 60 2,50 122117

It can be supplied also with ball bearing.

Other variationsof rollers

34

Information!Eyebolt DIN 580 and round nut DIN 582 must not be used in sidewardtraction. For this type of traction we recommend rotating eyes TAWGKfrom our catalogue 4 ”GEWA-binding chanesy”


EyeboltDIN 580with metrical thread zinc-coated

Size Carrying cap. d1 d2 d3 b k h Weigth Art. no.vertically 100 pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] zinc-coated

M 6* 70 17 28 16 13 6 17 5,0 122230

M 8 140 20 36 20 15 8 18 6,0 122231

M 10 230 25 45 25 18 10 22 11,0 122232

M 12 340 30 54 30 22 12 26 18,0 122233

M 14* 490 35 63 35 28 14 30 28,5 122234

M 16 700 35 63 35 28 14 30 28,0 122235

M 20 1200 40 72 40 30 16 35 45,0 122236

M 22 1500 45 81 45 35 18 40 67,0 122237

* This size refers to DIN 580 norm only.

DIN 580

with metrical threadglossy

Size Carrying cap. d1 d2 d3 b k h Weigth Art. no.vertically 100 pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [cca. kg] gloss

M 6* 70 17 28 16 13 6 17 5,0 122210

M 8 140 20 36 20 15 8 18 6,0 122211

M 10 230 25 45 25 18 10 22 11,0 122212

M 12 340 30 54 30 22 12 26 18,0 122213

M 14* 490 35 63 35 28 14 30 28,5 122214

M 16 700 35 63 35 28 14 30 28,0 122215

M 20 1200 40 72 40 30 16 35 45,0 122216

M 22 1500 45 81 45 35 18 40 67,0 122217


35

BG

PRÜFZERT

BG 005161

M

B

L

G

D

H


Eyebolt, WELP typehigh-strength, quality class 8, red

► Designed for 1-strand chains.► Eye with flattening for use in connection.► Made in quality class 8. Material corresponds with the highest loading

limits according to DIN 580.► Magnaflux rupture resistant.► Supplied with plastic covers to prevent damaging during transport.► Powdered surface.

Type B D G H L M Weigth Art. no.cca.

[mm] [mm] [mm] [mm] [mm] [mm] [kg]

WELP-M16-8 72 16 42 56 24 M16 0,4 132850

WELP-M20-8 72 16 42 58 30 M20 0,5 132851

WELP-M24-8 88 19 48 69 36 M24 0,9 132852

WELP-M30-8 106 22 60 84 45 M30 1,4 132853

WELP-M36-8 127 26 72 100 54 M36 2,3 132854

Round nutDIN 582with metrical threadglossy or zinc-coated

Size Carrying cap. d1 d2 d3 k h Weigth Art. no. Art. no.vertically 100 pcs[kg] [mm] [mm] [mm] [mm] [mm] [cca. kg] gloss zinc-coated

M 6* - 20 36 20 8 18 4,9 122250 122270

M 8 140 20 36 20 8 18 5,0 122251 122271

M 10 230 25 45 25 10 22 9,0 122252 122272

M 12 340 30 54 30 12 26 16,0 122253 122273

M 16 700 35 63 35 14 30 24,0 122254 122274

M 20 1200 40 72 40 16 35 36,0 122255 122275

M 22* 1500 45 72 40 18 40 58,0 122256 122276


Pay attention to the thickness of thread:

In the steel min. 1 x MIn the cast iron min. 1,25 x MIn the alluminium min. 2 x M

Pay attention:

Carrying capacities mentioned on the leftare valid for equable loading.For special asymmetrical loadings thefollowing reduction is valid:

Carrying capacity of 2-strand =reduction at 2-strand from 45-60°

Carrying capacity of 3+4-strand =reduction at 2-strand to 45-60°

An asymmetrical 1-strand usage thereduction of carrying capacity is alsoapplied.

Carrying capacity 1-strand 2-strand 3- and 4-strand

Type Carrying cap. from 0-90° from 90-120° from 0-90° from 90-120°[to] to 0-45° to 45-60° to 0-45° to 45-60°

WELP-M16-8 4,0 (1,0*) 1,4 1,0 2,1 1,5

WELP-M20-8 6,0 (1,5*) 2,1 1,5 3,15 2,25

WELP-M24-8 8,0 (2,0*) 2,8 2,0 4,2 3,0

WELP-M30-8 12,0 (3,0*) 4,2 3,0 6,3 4,5

WELP-M36-8 16,0 (4,0*) 5,6 4,0 8,4 6,0

36

Information!Other pushingtools and ropescissors deliveredon order.


GEWA - Pushing toolsdesigned for simple and safe production of binding ropes*

Rope diameter Rope diameter Rope clamps Tool Art. no.with textile inlay with wire inlay no. no.[FE] [SE]

1,6 - 2,0 mm 1,2 - 1,6 mm 2 2 122332

2,5 - 2,7 mm 1,7 - 2,1 mm 2,5 2,5 122333

2,8 - 3,2 mm 2,5 - 2,7 mm 3 3 122334

3,3 - 3,7 mm 2,7 - 3,2 mm 3,5 3,5 122335

3,8 - 4,3 mm 3,2 - 3,7 mm 4 4 122336

4,4 - 4,8 mm 3,7 - 4,3 mm 4,5 4,5 122337

4,9 - 5,4 mm 4,3 - 4,8 mm 5 5 122338

* They are not allowed to be used as a binding instrument.

Pressing pliers* and clamps*

Rope-Ø Clamp no. Art. no.copper-nickel

[mm]

1,5 - 2 NT 281 C 122340

2,5 NT 282 G 122341

Necessary pliers NT 32 CG 122350


[mm]

1,5 - 2 NT 281 C 122340

2,5 NT 282 G 122341

3 - 3,5 NT 283 M 122342

4 - 4,5 NT 284 P 122343

Necessary pliers NT 64 CGMP 122351


[mm]

3 - 3,5 NT 283 M 122342

4 - 4,5 NT 284 P 122343

5 NT 286 X 122344

Necessary pliers NT 63 XPM 122352

Rope scissorsType Art. no.

HWC-6 (no picture) 122807

CC 16 122360

CC 20 122361

NT 32 CG

NT 64 CGMP

Rope scissorsCC16/20

Chain Carrying capacity [t] Art. no. Art. no. without shortener with shortener

[Ø mm]

6 3,00 2,12 133306 133706

8 5,30 3,75 133308 133708

10 8,00 6,00 133310 133710

13 14,00 10,00 133313 133713

16 21,20 15,00 133316 133716

19 30,00 21,20 133319 per demand

22 40,00 28,00 133322 per demand


[Ø mm]

6 2,00 1,40 133206 133606

8 3,55 2,50 133208 133608

10 5,60 4,00 133210 133610

13 9,50 6,70 133213 133613

16 14,00 10,00 133216 133616

19 20,00 14,00 133219 per demand

22 26,50 19,00 133222 per demand

Chain Carrying capacityt [t] Art. no. Art. no.without shortener with shortener

[Ø mm]

6 1,40 133106 133506

8 2,50 133108 133508

10 4,00 133110 133510

13 6,70 133113 133513

16 10,00 133116 133516

19 14,00 133119 per demand

22 19,00 133122 per demand

37

Other designs available on demand.


GEWA - Star-Alloy - binding chainsquality class No. 10, completely prebuilt,basic length 1 m (NL)

90°

2-strand chains with or without shortener.


45° 60°


45° 60°

38


GEWA - Star-Alloy - binding chainsquality class No. 10, completely prebuilt, basic length 1 m. (NL)



[d/mm]

6 3,00 2,12 133406 133806

8 5,30 3,75 133408 133808

10 8,00 6,00 133410 133810

13 14,00 10,00 133413 133813

16 21,20 15,00 133416 133816

19 30,00 21,20 133419 per demand

22 40,00 28,00 133422 per demand

45° 60°

Endless chain

Chain Carrying capacity [t] Art. no.

[d/mm]

6 2,24 133906

8 4,00 133908

10 6,30 133910

13 10,60 133913

16 16,00 133916

19 22,40 133919

22 30,00 133922

Annular chain simple

Chain Carrying capacity [t] Art. no. without shortener

[d/mm]

6 1,50 1,10 133006

8 2,70 2,00 133008

10 4,40 3,20 133010

13 7,30 5,30 133013

16 11,00 8,00 133016

19 15,40 11,20 133019

22 20,90 15,20 133022

45° 60°

Other designs available on demand.

39

Average of link 1-strand chain 2-strand chain 3- and 4-strand chain Annular chain

Carrying capacity Carrying capacity Carrying capacity Carrying capacityChain WLL WLL WLL WLL[mm] [t] [t] [t] [t]Anglel ß 0 - 45° 45° - 60° 0 - 45° 45° - 60°

6 1,40 2,00 1,40 3,00 2,12 2,24

8 2,50 3,55 2,50 5,30 3,75 4,00

10 4,00 5,60 4,00 8,00 6,00 6,30

13 6,70 9,50 6,70 14,00 10,00 10,60

16 10,00 14,00 10,00 21,20 15,00 16,00

19 14,00 20,00 14,00 30,00 21,20 22,40

22 19,00 26,50 19,00 40,00 28,00 30,00

When using chains in higher temperatures, their carrying capacity is

alrered:

Star-Alloy

Temperature of binding Reduction ofchain carrying capacity

od -40° do 200° 0 % redukce

od +200° do 300°C 10 % redukce

od +300° do 380°C 25 % redukce

Temperature and its influence


ChainProportions, loading value, weigth

Chain WL P Li/min. Le/max. Weigth Art. no.[Ø mm] [kg] [mm] [mm] [mm] [kg/m]

6 1400 18 8,7 22,2 0,89 133030

8 2500 24 10,9 28,8 1,57 133031

10 4000 30 13,5 36,0 2,46 133032

13 6700 39 17,5 46,8 4,18 133033

16 10000 48 21,5 57,6 6,28 133034

19 14000 57 26,6 69,4 8,90 133035

22 19000 66 29,5 79,2 11,88 133036

GEWA - Star-Alloy - binding chainshigh - strength - carrying capacity tableQuality class No. 10, special grade

40


Suspension headtype G/S3- and 4-strand

Suspension headtype A/S1- and 2-strand

Cut - down hooktype VK/S

Dome suspension headtype GVK/S

Type for chain e d t w d1 t1 w1 s * X Weigth Art. no.

thickness [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

G/S 6 6 189 19 135 75 13,0 54 25 10 * 25 1,26 133050

G/S 8 8 230 23 160 90 16,5 70 34 14 * 30 2,32 133051

G/S 10 10 265 27 180 100 19,5 85 40 14 * 35 3,68 133052

G/S 13 13 315 33 200 110 23,0 115 50 17 * 35 6,46 133053

G/S 16 16 400 36 260 140 27,0 140 65 20 * 46 10,06 133054

G/S 19 19 500 50 350 190 33,0 150 70 26 * 45 22,87 133055

G/S 22 22 520 50 350 190 36,0 170 75 24,79 133056

Type for for d t w s * X Weigth Art. no.1-string chains 2-string chainsthickness thickness [mm] [mm] [mm] [mm] [kg]

A/S 13 6 6 13,0 110 60 10 * 30 0,34 133040

A/S 16 8 - 16,5 110 60 14 * 30 0,53 133041

A/S 18 10 8 19,0 135 75 14 * 35 0,92 133042

A/S 22 13 10 23,0 160 90 17 * 35 1,60 133043

A/S 26 16 13 27,0 180 100 20 * 46 2,46 133044

A/S 32 19 16 33,0 200 110 26 * 51 4,14 133045

A/S 36 22 19 36,0 260 140 6,22 133046

A/S 45 - 22 45,0 340 180 12,82 133047

Type Chain Carrying e b a d1 d2 g Weigth Art. no.capacity WLL

[Ø mm] [to] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

VK/S 6 6 1,4 84 36,5 28,5 18 9 7 0,30 133090

VK/S 8 8 2,5 122 53,0 39,0 24 12 9 0,63 133091

VK/S 10 10 4,0 159 69,5 50,0 31 14 13 1,25 133092

VK/S 13 13 6,7 203 92,0 64,0 37 18 15 2,70 133093

VK/S 16 16 10,0 233 102,0 80,0 48 24 18 4,80 133094

Type Chain Carrying d t w e Weigth Art. no.capacity WLL

[Ø mm] [t] [mm] [mm] [mm] [mm] [kg]

GVK/S 6 6 1,4 13,0 110 60 194 0,64 133060

GVK/S 8 8 2,5 16,5 110 60 232 1,16 133061

GVK/S 10 10 4,0 19,0 135 75 294 2,17 133062

GVK/S 13 13 6,7 23,0 160 90 363 4,30 133063

GVK/S 16 16 10,0 27,0 180 100 413 7,26 133064

41


Dome suspension headtype GVK/S 2

Type Chain Carrying capacity d t w e Weigth Art. no.0 - 45° 45°-60°

[Ø mm] [t] [t] [mm] [mm] [mm] [mm] [kg]

GVK/S 2-6 6 2,00 1,4 13 110 60 194 0,94 133070

GVK/S 2-8 8 3,55 2,5 19 135 75 257 2,18 133071

GVK/S 2-10 10 5,60 4,0 23 160 90 319 4,10 133072

GVK/S 2-13 13 9,50 6,7 27 180 100 383 7,86 133073

GVK/S 2-16 16 14,00 10,0 33 200 110 433 13,74 133074

Dome suspension headtype GVK/S 4

Type Chain Carrying capacity d t w e Weigth Art. no.0 - 45° 45°-60°

[Ø mm] [t] [t] [mm] [mm] [mm] [mm] [kg]

GVK/S 4-6 6 3,00 2,12 19 135 75 273 2,46 133080

GVK/S 4-8 8 5,30 3,75 23 160 90 352 4,84 133081

GVK/S 4-10 10 8,00 6,00 27 180 100 424 8,68 133082

GVK/S 4-13 13 14,00 10,00 33 200 110 518 17,26 133083

GVK/S 4-16 16 21,20 15,00 36 260 140 633 29,26 133084

Special suspension headtype T/S1- and 2-strand

Type Chain Chain d t w s Weigth Art. no.1-string 2-string[Ø mm] [Ø mm] [mm] [mm] [mm] [mm] [kg]

T/S 13 6 6 14,0 120 70 10 0,44 133250

T/S 16 8 16,0 140 80 13 0,67 133251

T/S 18 10 8 19,0 160 95 14 1,09 133252

T/S 22 13 10 23,0 160 110 17 1,69 133253

T/S 26 16 13 27,0 190 110 20 2,56 133254

T/S 32 19 16 33,0 230 130 26 4,78 133255

T/S 36 22 19 38,0 275 150 29 7,48 133256

Special suspension headtype GT/S3- and 4-strand

Type Chain, e d t w d1 t1 w1 s * X Weigth Art. no.

thickness[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

GT/S 6 6 214 19 160 95 13,0 54 25 10 * 25 1,26 133260

GT/S 8 8 230 23 160 110 16,5 70 34 14 * 30 2,32 133261

GT/S 10 10 275 27 190 110 19,5 85 40 14 * 35 3,68 133262

GT/S 13 13 345 33 230 130 23,0 115 50 17 * 35 6,46 133263

GT/S 16 16 415 38 275 150 27,0 140 65 20 * 46 10,06 133264

42

Type P/S Type PS/S


Type Chain e h a d1 d2 g b Weigth Art. no. thickness[Ø mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

GH/S 8 8 131 29 25 24 11 64 118 0,92 133280

GH/S 10 10 158 35 32 31 14 76 143 1,77 133281

GH/S 13 13 190 42 40 39 17 89 170 3,11 133282

GH/S 16 16 224 50 46 47 22 102 200 5,03 133283

GH/S 19 19 260 61 54 56 28 114 231 7,60 133284

Foundry hooktype GH/S

Size Chain e b d1 d2 g Weigth Art. no. Art. no.thickness[Ø mm] [mm] [mm] [mm] [mm] [mm] [kg] P/S PS/S

6 6 51 47,4 12 8,5 8 0,15 133290 -

8 8 71 58 20 11,5 10,5 0,4 133291 133960

10 10 88 76 22 15 13 0,9 133292 133961

13 13 113 101 26 18 17 1,8 133293 133962

16 16 129 118 32 23 19 3,6 133294 -

19 19 141 140 36 26 23 6,15 133295 -

22 22 173 166 42 29 26 9,00 133296 -

Cut - down hooktype P/S, with eyetype PS/S, with eye and lock

Type Chain e b d g Weigth Art. no.

[Ø mm] [mm] [mm] [mm] [mm] [kg]

PK/S 6 6 45 47,4 7,4 8,0 0,15 133950

PK/S 8 8 61 58,0 10,0 10,5 0,38 133952

PK/S 10 10 76 76,0 12,5 13,0 0,85 133953

PK/S 13 13 104 101,0 16,0 17,0 1,90 133954

PK/S 16 16 107 122,0 20,0 19,0 2,80 133955

PK/S 19 19 140 147,4 24,0 23,0 3,50 133956

PK/S 22 22 167 172,5 27,0 26,0 5,50 133957

Cut - down hook type PK/S, with fork

Type Chain Carrying e h a d g1 b Weigth Art. no.capacity WLL


HKS/S 6 6 1,4 69,0 20 15 7,4 19 66 0,20 133130

HKS/S 8 8 2,5 94,5 28 19 10,0 26 90 0,60 133131

HKS/S 10 10 4,0 109,0 33 24 12,5 31 108 1,10 133132

HKS/S 13 13 6,7 136,0 40 34 16,0 39 131 2,00 133133

HKS/S 16 16 10,0 155,0 49 37 20,0 45 153 3,48 133134

HKS/S 19 19 16,0 184,0 53 46 24,0 53 177 5,00 133135

HKS/S 22 22 19,0 214,0 62 50 27,0 62 196 12,1 133136

Loading hoodtype HKS/S, with fork and wrought, safety lock

43

Safety stopfor loading hookwith fork HKS/S

Carrying capacity plaguette


Type Chain Carrying e h a b d g Weight Art. no.capacity WLL


HKSB/S 6 6 1,4 94 20 16 71 7,5 28 0,5 133140

HKSB/S 8 8 2,5 123 26 20 88 10,0 34 0,9 133141

HKSB/S 10 10 4,0 144 30 25 107 13,0 45 1,6 133142

HKSB/S 13 13 6,7 180 40 34 138 16,0 52 2,9 133143

HKSB/S 16 16 10,0 217 50 35 168 21,0 60 5,9 133144

Safety hook type HKSB/S, with fork

Type Chain Carrying e h a b d1 d2 g Weigth Art. no.capacity WLL

[Ø mm] [to] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

HSB/S 6 6 1,4 110 20 16 71 21,0 11 28 0,5 133150

HSB/S 8 8 2,5 136 26 20 88 27,0 12 34 0,9 133151

HSB/S 10 10 4,0 169 30 25 107 34,5 15 45 1,5 133152

HSB/S 13 13 6,7 205 40 34 138 40,0 20 52 2,7 133153

HSB/S 16 16 10,0 251 50 35 168 50,0 27 60 5,7 133154

HSB/S 19 19 16,0 290 62 50 194 60,0 30 70 7,9 133155

HSB/S 22 22 19,0 322 65 52 211 70,0 32 81 11,2 133156

Safety hook type HSB/S, with eye

Type Weigth Carrying e c s d b g Weigth Art. no.capacityWLL


V/S 6 6 1,4 44,4 7,8 11,0 7,6 39,0 14,10 0,06 133160

V/S 8 8 2,5 61,5 11,5 15,0 10,0 53,0 18,35 0,18 133161

V/S 10 10 4,0 72,0 12,6 17,8 12,6 63,0 23,00 0,33 133162

V/S 13 13 6,7 88,0 19,0 22,0 16,7 79,0 27,60 0,70 133163

V/S 16 16 10,0 103,0 21,0 29,0 21,0 106,0 33,00 1,14 133164

V/S 19 19 16,0 115,0 29,5 34,8 24,5 118,0 41,70 2,14 133165

V/S 22 12 19,0 135,0 29,5 38,0 27,0 146,5 48,00 3,21 133166

Connecting elementtype V/S

Type Chain used Art. no.equipment

[Ø mm]

FG 6 6 HKS/S 6 133173

FG 7-8 8 HKS/S 8 133174

FG 10 10 HKS/S 10 133175

FG 13 13 HKS/S 13 133176

FG 16 16 HKS/S 16 133177

FG 19 19 HKS/S 19 133178

FG 22 22 HKS/S 22 133179

Type 1-strand 2/3/4-strandArt. no. Art. no.

Star-Alloy 133170 133171

UVV-Testplaquette 130766 130766

44

ENORM - screw - in pulling eyestype ENORM EAWKcompact and easy setting. 4-fold securing in each direction in case of overloading,360° rotation.rank of rotation is permitted max. up to 180°.

EAWK 1 - 6Mark Thread- DIN 13 b g sw t Oval eye Weigth Art. no.

type Vlead[mm] [d x e] [mm] [mm] [mm] [mm] [kg]

EAWK 1 M 16 x 20 2,0 36 54 30 43 13 x 55 x 30 0,44 132370

EAWK 2 M 20 x 30 2,5 52 70 41 58 16 x 70 x 34 0,95 132371

EAWK 4 M 24 x 30 3,0 57 78 46 64 18 x 85 x 40 1,45 132372

EAWK 6 M 30 x 35 3,5 70 97 55 82 20 x 85 x 40 2,25 132373

Carrying capacity table EAWK 1 - 6Method of tightening

Number of tightening points 1 1 2 2 2 3 or 4

Angle 0° 90° 0° 90° 0-45° 45-60° 0-45° 45-60°

Mark Thread Carry.cap./WLL Carry.cap./WLL Carry. cap./WLL Carry. cap./WLL

[to] [to] [to] [to] [to] [to] [to] [to]

EAWK 1 M 16 2,8 1,4 5,6 2,8 2,0 1,4 3,0 2,12

EAWK 2 M 20 5,0 2,5 10,0 5,0 3,55 2,5 5,3 3,75

EAWK 4 M 24 8,0 4,0 16,0 8,0 5,6 4,0 8,0 6,0

EAWK 6 M 30 13,4 6,7 26,8 13,4 9,5 6,7 14,0 10,0

Incorrect anchorage Correct anchorage

Conditions for assembly of pulling eyes:

1) Surface for anchorage must be plain and even.

2) By means of a spanner DIN 895 or 894 the pulling eye must be tightened to the surface.

3) It is possible to use liquid glue for achieving planned safety

4) Minimal depth of thread:in iron 1 x din cast iron 1,25 x din aluminium 2 x din aluminium/magnesium alloy 2,5 x d

Attention: Before anchorage put the oval eye into correct position.

Special sizes can be delivered on order.

Other sizes of threads and lengths of threads can be delivered on order.

Článek


45

Screw - in pulling eyes, type EFPpulling eye in every direction, revolving, 4-fold securing against breaking.

Carrying capacity table EFPMethod of tightening

Number of tightening points 1 1 2 2 2 3 oder 4

Angle 0° 90° 0° 90° 0-45° 45-60° 0-45° 45-60°

Mark Thread Carry. cap./WLL Carry .cap./WLL Carry. cap./WLL Carry. cap./WLL

[mm] [to]** [to]* [to]** [to] [to] [to] [to] [to]

EFP 0,5 M 10 * 40 0,50 0,70 1,00 1,40 0,70 0,50 1,00 0,70

EFP 0,8 M 12 * 45 0,80 1,25 1,60 2,50 1,12 0,80 1,60 1,12

EFP 1,5 M 16 * 55 1,50 2,12 3,00 4,00 2,00 1,50 3,15 2,24

EFP 2,5 M 20 * 70 2,50 3,55 5,00 7,10 3,35 2,50 5,00 3,75

EFP 4,0 M 24 * 80 4,00 5,60 8,00 11,20 5,60 4,00 8,00 6,00

EFP 5,0 M 27 * 80 5,30 7,10 10,00 14,00 7,10 5,30 10,00 7,50

EFP 6,0 M 30 * 90 6,00 8,00 12,00 16,00 8,00 6,00 12,50 9,00

Mark Tightening a b c d e f g l s Weigth Art. no.moment[N/m] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

EFP 0,5 40 69 50 48 13 28 100 15 54 34 0,70 132610

EFP 0,8 65 69 50 48 13 28 100 20 53 34 0,71 132611

EFP 1,5 160 69 50 48 13 28 100 30 51 34 0,72 132613

EFP 2,5 300 69 50 48 13 28 100 42 46 34 0,73 132614

EFP 4,0 500 104 76 72 18 39 147 41 74 58 2,60 132615

EFP 5,0 770 104 76 72 18 39 147 41 72 58 2,70 132616

EFP 6,0 1000 104 76 72 18 39 147 51 70 58 2,75 132617

BG

PRÜFZERT

► 360° rotation► Oval eye positioning and folding about 180°► Flat form► Flat point► Thread from M 10 to M 30► Carrying cap. from 0,5 t to 6 t► Screw according to EN 24014 (DIN931)► Class 10.9, disruption test

Notice:When lifting loads in an asymetric way,always be lay out into 2-, 3 or 4-strandlashing tools.


46

Bolt - on lifting point, type TAPG4-fold securing against breaking in every direction

TAPG 3 - 8 / TPB 15 - 25Mark Screw Tightening a c Ød e f g h l Weigth Art. no.

moment[Nm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

TAPG 3 M 20 250 12 50 18 34 130 90 21 53 1,08 132590

TAPG 5 M 24 430 15 60 22 42 160 110 25 63 2,04 132591

TAPG 8 M 27 630 20 70 26 55 190 130 28 68 3,58 132592

TPB 15 M 36 675 40 72 32 90 255 175 39 110 7,40 132585

TPB 20 M 42 1050 50 90 40 116 295 200 45 140 15,10 132586

TPB 25 M 45 1400 50 90 40 116 295 200 48 140 15,10 132587

Carrying capacity table TAPG 3 - 8 / TPB 15 - 25Method of tightening


Angle 0° 90° 0° 90° 0-45° 45-60° 0-45° 45-60°

Mark Carry.cap./WLL Carry.cap./WLL Carry.cap./WLL Carry.cap./WLL[t] [to] [to] [to] [to] [to] [to] [to] [to]

TAPG 3 4,75 3,15 9,5 6,3 4,25 3,15 6,3 4,75

TAPG 5 8 5,3 16 10,6 7,1 5,3 11,2 8

TAPG 8 11,8 8 23,6 16 11,2 8 16 11,8

TPB 15 15 15 30 30 21 15 31,5 22,5

TPB 20 20 20 40 40 28 20 42 30

TPB 25 25 25 50 50 35 25 52,2 37,5

Guidelines for mounting fastening point:

1. Surface of tightening area must be determined for anchorage.

2. Screwing can be also used as a drawing pattern.

3. Drill only proportions „h“ (M 20 = 21 mm, M 24 = 25 mm, M 27 = 28 mm).

4. The depth of thread at blind hole must be min. 1 x D.

5. Securing against over rotation is made by means of securing a metal plate according DIN 463.

6. Screws with underlaid Si-metal plate must be carefully tightened and secured.

Info: screws EN 24017 (DIN 933) 10.9 that are tested against disruption are not a part of supply.


47

Weld - on lifting point, type TAPS4-fold securing against breaking in every direction

TAPS 1 - 15Mark a b c Ød e f l Weigth Art. no.

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

TAPS 1 35 64 35 13 26 70 40 0,35 130584

TAPS 2 37 66 36 13 27 70 41 0,36 130589

TAPS 3 49 92 50 18 37 92 53 0,84 130585

TAPS 5 60 111 60 22 45 111 63 1,60 130586

TAPS 8 75 132 70 26 50 127 68 2,61 130587

TAPS 15 90 185 100 30 60 190 120 5,40 130588

Carrying capacity table TAPS 1 - 15Method of tightening


Angle 0° 90° 0° 90° 0-45° 45-60° 0-45° 45-60°

Mark Carry.cap./WLL Carry.cap./WLL Carry.cap./WLL Carry.cap./WLL

[to] [to] [to] [to] [to] [to] [to] [to]

TAPS 1 1,6 1,12 3,2 2,24 1,5 1,12 2,36 1,6

TAPS 2 3 2 6 4 2,8 2 4 3

TAPS 3 4,75 3,15 9,5 6,3 4,25 3,15 6,3 4,75

TAPS 5 8 5,3 16 10,6 7,1 5,3 11,2 8

TAPS 8 11,8 8 24 16 11,2 8 16 11,8

TAPS 15 22,4 15 45 30 21,2 15 31,5 22,4

Guidelines for mounting of weld-on lifting point:

1. Surface of the area that the lifting point will be welded on to must be clean.

2. Welding must be done according to the norm DIN 8560.

3. The lifting point must be fixed vertically to the metal plate and the handle of the point must be evened up.

4. Material used for the welded body is on page 52-3.

5. For welding from bellow (MAG-M), a wire electrode 1,0 according toDIN EN 440 G 50 3 M is enough to use as welding material.

6. For the handle arc welding a layer E 382 RR 12 Ø 2,5 and a covering a layer E 420 RR 12 Ø 3,25 according to DIN EN 499 is enough for additional material.

7. Welded metal is mainly cut for application. (The sum of single layers is min. at the same thickness as the metal plate of hook)


48

Round steel chainsimilar to DIN 763 / DIN 5685uncalibrated, zinc-coated

Carrying capacity Pulling power Tenacity Chain proportions Weigth Art. no. Art. no.

d t b zinc-coated Stainless[kg] [daN] [daN] [mm] [mm] [mm] [kg/m]

- - - 3 16 11 0,16 132009 -

- - - 3 26 12 0,15 132000 132020

100 200 600 4 32 16 0,27 132001 132021

160 315 1000 5 35 20 0,43 132002 132022

224 450 1400 6 42 24 0,63 132003 132023

300 600 1800 7 49 28 0,85 132004 132024

400 800 2500 8 52 32 1,10 132005 132025

630 1250 4000 10 65 40 1,75 132006 132026

1000 2120 6300 13 82 52 2,95 132007 132027

Round steel chainDIN 766calibrated, zinc-coated

Carrying cap. Pulling power Tenacity Chain proportions Weigth Art. no.

d t b1 min b2 max zinc-coated[kg] [daN] [daN] [mm] [mm] [mm] [mm] [kg/m]

150 300 600 4 16,0 5,0 13,7 0,32 132010

250 500 1000 5 18,5 6,2 16,9 0,50 132011

350 710 1400 6 18,5 7,2 20,2 0,80 132012

500 1000 1900 7 22,0 8,4 23,6 1,10 132013

630 1250 2500 8 24,0 9,6 27,0 1,40 132014

800 1600 3200 9 27,0 10,8 30,4 1,80 132015

1000 2000 4000 10 28,0 12,0 34,0 2,20 132016

1120 2360 4500 11 31,0 13,2 37,0 2,70 132017

1600 3200 6300 13 36,0 15,6 44,2 3,80 132018

b

t

d

t

b1min

b2max

d

Round steel chain for work in mines.Binding chains for work in mines,anchorage chains used in carmanufacturing, industrial chains(chemistry, medicine etc.)

Accessories of chains for forestry andagriculture.

Lifting devices, conveyors,transport devices.

Chains for universal usage - ships,excavators, cranes, loops of chains.

High quality tighteningsystems can be foundinside katalog 7.

Other designs can bedelivered on order.

Other designs can be delivered on order.



49

Lashing chainsDIN EN 818-4, quality class 8, completely assembledBasic length 1 m (NL)

1-strand with or without shortener

Chain Carry.cap. [to] Art. no. Art. no.without withshortener shortener

[d/mm]

6 1,12 136106 137106

7 1,50 136107 137107

8 2,00 136108 137108

10 3,15 136110 137110

13 5,30 136113 137113

16 8,00 136116 137116

18 10,00 136118 137118


chain Carry.cap. [to] Art. no. Art. no.without withshortener shortener

[d/mm]

6 1,60 1,20 136206 137206

7 2,12 1,50 136207 137207

8 2,80 2,00 136208 137208

10 4,25 3,15 136210 137210

13 7,50 5,30 136213 137213

16 11,20 8,00 136216 137216

18 14,00 10,00 136218 137218


Chain Carry.cap. [to] Art. no. Art. no.without withshortener shortener

[d/mm]

6 2,36 1,70 136306 137306

7 3,15 2,24 136307 137307

8 4,25 3,00 136308 137308

10 6,70 4,75 136310 137310

13 11,20 8,00 136313 137313

16 17,00 11,80 136316 137316

18 21,20 15,00 136318 137318

90°

45° 60°

45° 60°

* Up to a diameter of 13 mm there is shortener EKS.


Information:These products can be delivered also in stainless steel


50

Lashing chainsDIN EN 818-4, quality class 8, completely assembledBasic length 1 m (NL)


Chain Carry. cap. [to] Art. no. Art. no.without withshortener shortener*

[d/mm]

6 2,36 1,70 136406 137406

7 3,15 2,24 136407 137407

8 4,25 3,00 136408 137408

10 6,70 4,75 136410 137410

13 11,20 8,00 136413 137413

16 17,00 11,80 136416 137416

18 21,20 15,00 136418 137418

Endless chain

Chain Carry. cap. [to] Art. no.

[d/mm]

6 1,80 136006

7 2,50 136007

8 3,15 136008

10 5,00 136010

13 8,50 136013

16 12,50 136016

18 16,00 136018

45° 60°

Annual chain simple

Chain Carry.cap. [to] Art. no. Art. no.without withshortener shortener*

[d/mm]

6 1,25 0,90 137040 137006

7 1,70 1,25 137041 137007

8 2,24 1,60 137042 137008

10 3,35 2,50 137043 137010

13 5,60 4,25 137044 137013

16 9,00 6,30 137045 137016

18 11,20 8,00 137046 137018

* Up to a diameter of 13 mm there is shortener EKS.


Information:These products can be delivered also in stainless steel

45° 60°


51

High - tensile chainAccording to DIN EN 818-2, black, varnished or with protection against rust

Chain Carry.cap. t bb Weigth Art. no. Art. no.1 metre protection against

black rust[d/mm] [kg] [mm] [≈mm] [cca. kg]

6 1120 18 8 0,8 130000 130020

7 1500 21 10,5 1,1 130001 130021

8 2000 24 10,8 1,5 130002 130022

10 3150 30 13,5 2,2 130003 130023

13 5300 39 17,5 3,8 130004 130024

16 8000 48 21,5 5,7 130005 130025

18 10000 54 24,3 7,3 130006 130026

19 11200 57 25 8,5 130007 130027

20 12500 60 27 9 130008 130028

22 15000 66 29,5 10,9 130009 130029

Simple shortenertype EKS with safety, red vanished

Size c d h l t Weigth Art. no.

[mm] [mm] [mm] [mm] [mm] [cca. kg]

6 38 8 14 105 81 0,3 130045

7 44 8,8 18 123 97 0,5 130046

8 50 10 19 140 104 0,8 130047

10 63 12 26 175 139 1,2 130048

13 81 16 36 228 179 2,6 130049

Double shortenertype DVKS with safety, red vanished

Size c l t Weigth Art. no.


6 32 100 79 0,3 130055

7 37 104 80 0,4 130056

8 42 142 91 0,9 130057

10 53 162 121 1,3 130058

13 69 210 160 2,4 130059

Shortenertype VKS with pop-up safety

Size Carry.cap. d t Weigth Art. no.

[kg] [mm] [mm] [cca. kg]

6 1120 8 45 0,2 130030

7 1500 8,8 46 0,3 130031

8 2000 10 54 0,5 130032

10 3150 12 77 0,9 130033

13 5300 16 92 1,5 130034

16 8000 20 74 2,6 130035

b1

d

t

t

t l

d

d

h

c

c

t l

t

d


52

Connection linktype TBS, red vanished

Size Carry. c e f g k t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

TBS 6 1120 42 18 11 8 14,5 47 0,08 131425

TBS 7 2000 54 22 14 9 20 56 0,20 130081

TBS 8 2000 51 22 15 10 19 57 0,17 131461

TBS 10 3150 68 25 19 13 23 68 0,35 131462

TBS 13 5300 78 35 22 16 27 85 0,65 130089

TBS 16 8000 100 44 30 21 36 109 1,36 131468

TBS 18 10000 102 47 33 22 39 115 1,58 131469

TBS 20 12500 111 51 36 24 43 125 2,20 131442

TBS 22 15000 121 54 40 28 48 135 2,81 131443

Chain connectortype KV, red vanished

Size Carry. bb bc cb cc d h l sb sc t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

KV 6 1120 6,5 19 33 37 8 12 57 6 8 29 0,1 130090

KV 7 1500 7,5 21 36 44 8,8 14 64 9 12 33 0,2 130091

KV 8 2000 9 22 38 48 10 17 68 13 14 33 0,2 130092

KV 10 3150 12 28 50 59 12 20 84 13 15 42 0,4 130093

KV 13 5300 15 32 60 70 16 27 105 17 21 50 0,8 130094

KV 16 8000 17 40 75 90 20 32 130 23 26 60 1,4 130095

KV 18/20 12500 21 54 86 106 24 35 150 22 27 72 2,1 130096

t

e

kc

fg

l

h

t

d

c

c

ss

b

b

2

1

1

2

1

2

Constructional system SK

Connection link for endless loopstype SKR

Size Carry. cap. L B K S Weigth Art. no.**per pcs

[kg]* [mm] [mm] [mm] [mm] [kg]

SKR 7/8 2000 35 40 18 24 0,20 130860

SKR 10 3150 42 47 24 29 0,36 130861

SKR 13 5300 50 53 29 35 0,65 130862

SKR 16 8000 62 67 35 43 1,20 130863

SKR 18/20 12500 71 80 43 52 1,90 130864

* Safety factor: 4:1** without link SKT (bellow) and without SKA (connecion sets), on order.

LK

B S

Link and connecting settype SKT and type SKA (connecting set)

Size Carry. cap. For chain L B E Weigth Art. no.with diameter per pcs

[kg]* [mm] [mm] [mm] [mm] [kg]

SKT 7/8 2000 7/8 28 18 22 0,09 130880

SKT 10 3150 10 34 25 26 0,18 130881

SKT 13 5300 13 44 29 33 0,39 130882

SKT 16 8000 16 52 36 40 0,65 130883

SKT 18/20 12500 19 63 43 48 1,10 130884

* Safety factor: 4:1

EL

B


53

Oblong linkDIN EN 818-4, type A 1,with one suspension link for 1-strand lashing chain

Size d l w t Weigth Art. no.per piece

[mm] [mm] [mm] [mm] [kg]

A 1 6 13 110 60 138 0,4 130110

A 1 7 13 110 60 142 0,5 130111

A 1 8 16 110 60 147 0,7 130112

A 1 10 18 135 75 183 1,1 130113

A 1 13 22 160 90 220 2,2 130114

A 1 16 26 180 100 257 3,4 130115

A 1 18 32 200 110 287 6,0 130116

A 1 19/20 36 260 140 333 8,9 130117

Oblong linkDIN EN 818-4, type A 2,with two suspension links for 2-strand lashing chains



A 2 6 13 110 60 138 0,5 130120

A 2 7 16 110 60 142 0,8 130121

A 2 8 18 135 75 172 1,2 130122

A 2 10 22 160 90 208 1,9 130123

A 2 13 26 180 100 240 3,0 130124

A 2 16 32 200 110 277 5,0 130125

A 2 18 36 260 140 346 8,5 130126

A 2 19/20 40 300 160 373 14,0 130127

w l t

d

w l t

d

Shackle WVShape C ,with nut and wedge,high-tensile, red,accepted for lashing and clampingtools

Type Carrying cap. a b c d Ø e t Weigth Art. no.per piece


WV 6 1120 13,5 30 10 10 20 29 0,10 130179

WV 8 2000 17 39 13 12 24 35 0,18 130180

WV 10 3150 23 49 15 16 31 49 0,37 130181

WV 13 5300 27 61 19 20 37 61 0,78 130182

WV 16 8000 34 76 24 24 47 73 1,44 130183

WV 18 10000 40 88 27 27 56 84 2,20 130184

WV 22 15000 48 108 33 36 72 112 4,20 130185

WV 26 21200 53 121 37 39 78 119 6,20 130186

WV 28 25000 60 136 41 45 90 139 9,88 130187

WV 32 31500 66 150 45 48 96 149 10,80 130188

WV 36 40000 73 167 50 52 104 158 13,70 130189


54

Oblong linkDIN EN 818-4, type A 3,with three suspension links for 3-strand lashing chains



A 3 6 18 135 75 217 1,5 130130

A 3 7 18 135 75 221 1,6 130131

A 3 8 22 160 90 267 3,0 130132

A 3 10 26 180 100 313 4,6 130133

A 3 13 32 200 110 375 8,8 130134

A 3 16 36 260 140 477 14,4 130135

A 3 18 45 340 180 577 27,3 130136

A 3 19/20 51 350 190 573 30,5 130137

Oblong linkDIN EN 818-4, type A 4,with four suspension links for 4-strand lashing chains



A 4 6 18 135 75 217 1,6 130140

A 4 7 18 135 75 221 1,8 130141

A 4 8 22 160 90 267 3,0 130142

A 4 10 26 180 100 313 4,6 130143

A 4 13 32 200 110 375 8,8 130144

A 4 16 36 260 140 477 14,4 130145

A 4 18 45 340 180 577 27,3 130146

A 4 19/20 51 350 190 573 32,9 130147

wl

t

d

w l

t

d

Oblong linktype A, without wrought mark,

to DIN EN 818-4, lashing chains 1- and 2-strandto DIN 3088, lashing ropes 1- and 2-strand

Size Lashing chain Lashing rope d l w Art. no.DIN EN 818-4 DIN 3088

Size Size Rope-Ø Rope-Ø1-strand 2-strand 1-strand 2-strand [mm] [mm] [mm]

A 13 6/7 6 - - 13 110 60 130160

A 16 8 7 8/10/12/14 8/10/12 16 110 60 130161

A 18 10 8 16/18 14/16 18 135 75 130162

A 22 13 10 20/22/24 18/20 22 160 90 130163

A 26 16 13 26/28 22 26 180 100 130164

A 32 18 16 32 24 32 200 110 130165

A 36 19/20 18 36/40 26 36 260 140 130166

A 40 22 19/20 - 28/32 40 300 160 130167

w

l d


55

Oblong link settype AM 4, DIN EN 818-4with wrought mark for 3- and 4-strand lashing chains

Size d1 l1 w1 d2 l2 w2 t Weigth Art. no.per pcs

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

AM 4 6/7 18 135 75 13 54 25 189 1,2 130170

AM 4 8 22 160 90 16 70 34 230 2,2 130171

AM 4 10 26 180 100 18 85 40 265 3,4 130172

AM 4 13 32 200 110 22 115 50 315 6,0 130173

AM 4 16 36 260 140 26 140 65 400 10,0 130174

AM 4 18 45 340 180 32 150 70 490 18,9 130175

AM 4 19/20 51 350 190 32 150 70 500 23,3 130176

Oblong end linktype EG, DIN EN 818-4

Size Carry. cap. d l w Weigth Art. no.per pcs

[kg] [mm] [mm] [mm] [kg]

EG 6 1120 13 54 25 0,2 130190

EG 7 1500 16 70 34 0,4 130191

EG 8 2000 16 70 34 0,4 130192

EG 10 3150 18 85 40 0,5 130193

EG 13 5300 22 115 50 1,1 130194

EG 16 8000 26 140 65 1,8 130195

EG 18/20 12500 32 150 70 3,1 130196

w

l

td

d l22

w 2

1

1 1

wl

d

Oblong linkDIN EN 818-4, type AM,with wrought mark for 1- and 2-strand lashing chains

Size for chains d l w Weigth Art. no.per pcs

1-strand 2-strand [mm] [mm] [mm] [kg]

AM 6/76 6/7 6 13 110 60 0,3 130150

AM 87 8 7 16 110 60 0,5 130151

AM 108 10 8 18 135 75 0,8 130152

AM 1310 13 10 22 160 90 1,5 130153

AM 1613 16 13 26 180 100 2,3 130154

AM 1816 18 16 32 200 110 3,9 130155

AM 2018 19/20 18 36 260 140 6,3 130156

AM 2220 22 19/20 40 300 160 9,0 130157

w

l d

Safety hook with locktype EKNthickened hook lock

B

s

F

L

H

E

G

Size Carry. For chains L B E F G H Weigth Art. no.cap. diameter per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

EKN 6 1120 6 94 24 22 10 16 19 0,4 131530

EKN 7/8 2000 7/8 105 28 25 11,5 17 22 0,5 131531

EKN 10 3150 10 131 37 32 13,5 19 29 0,9 131532

EKN 13 5300 13 161 42 40 17,5 27 36 1,8 131533

EKN 16 8000 16 197 52 50 22 34 44 3,4 131534

EKN 18/20 12500 19 229 60 60 26 37 52 5,2 131535

EKN 22 15000 22 267 77 64 31 42 67 9,4 131536

EKN 26 21200 26 301 81 66 32 51 75 12,6 131537

EKN 32 31500 32 333 93 76 38 61 80 17,9 131538


56

Safety loading hooktype CLSred vanished

Size Carry. a b c d h l m s t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

CLS 6 1120 35 23 10 10 23 142 30 18 108 0,5 130390

CLS 7/8 2000 45 30 14 10 28 176 37 22 133 0,8 130391

CLS 10 3150 55 36 15 12 36 216 44 28 165 1,5 130392

CLS 13 5300 70 45 20 16 47 264 55 36 199 3,2 130393

CLS 16 8000 90 58 22 20 55 328 73 37 250 5,8 130394

CLS 18/20 10000 101 65 30 21 70 415 89 41 272 7,6 130395

CLS 22 15000 112 70 36 27 74 425 92 49 315 13,8 130396

h

ed

mtl

a

s

b

Size Carry. a b c d h l m s t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

CLW 6 1120 35 30 29 12 25 187 30 18 150 0,6 130410

CLW 7/8 2000 45 33 25 12,5 28 225 37 22 175 1,0 130411

CLW 10 3150 55 40 33 15 36 260 44 28 212 1,9 130412

CLW 13 5300 70 50 40 17 46 320 57 36 254 3,8 130413

CLW 16 8000 90 60 54 20 51 400 74 37 321 7,3 130414

CLW 18/20 12500 101 71 58 23 55 481 89 41 355 9,8 130415

Hook CLW is only allowed to be burdened only in direct pull.Hook with ball-bearing is not allowed to be burdened when rotating.

Safety loading hooktype CLWwith ball-bearing, red varnished

l

h

d

bc

t

m

a

s

SIKA-rotating hooktype WHSwith ball-bearing and extra stable and safe lockred varnished, zinc-coated lock

Size Carry. b c d h l m s t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

WHS 6 1120 30 24 13 27 166 19 21 128 0,6 130380

WHS 6/7 1500 30 24 13 30 199 24 27 156 0,9 130381

WHS 7 1500 35 30 14 29 217 28 25 171 1,2 130382

WHS 8 2000 36 32 17 32 229 28 30 180 1,4 130383

WHS 10 3150 38 30 18 42 261 33 31 201 2,5 130384

WHS 13 5300 61 58 28 48 357 44 42 288 5,5 130385

l t

h

m

d

bc

s


57

Size Carry. b d h l m s t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

CWH 6/7 1500 18 10 26 132 49 20 96 0,5 130420

CWH 8 2000 25 11,5 26 160 63 21 122 0,8 130421

CWH 10 3150 32 14 37 204 76 31 153 2,0 130422

CWH 13 5300 40 18 42 241 86 37 181 3,5 130423

CWH 16 8000 35 24 50 281 100 45 207 5,5 130424

CWH 18/20 12500 40 26 67 328 112 60 235 10,0 130425

CWH 22 15000 47 30 70 365 124 65 265 13,6 130426

CWH 26 21200 54 38 80 419 134 73 305 20,0 130427

Container hook with eyetype CWHred varnished

s

mt l

b

h

d

Size Carry. b c d h l m s t Weigth Art. no.cap. per pcs[kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

CWG 6-8 1000 6,5 32 8 24 122 47 16 85 0,4 131400

CWG 7-8 1600 7,5 36 8,8 26 132 49 17 90 0,5 131401

CWG 8-8 2000 9,0 40 10 29 156 63 21 109 1,0 131402

CWG 10-8 3200 12,0 50 12 38 194 76 31 134 2,7 131403

CWG 13-8 5000 16,0 60 16 43 233 88 37 161 4,0 131404

CWG 16-8 8000 18,0 75 20 53 285 98 42 197 6,4 131405

Container hook with forktype CWGred varnished

s

m

t l

d

h

bc

* Safety factor 4:1

Parallel hooktype VHG

Size For chains Carrying cap. L B Weigth Art. no.diameter per pcs[mm] [kg]* [mm] [mm] [kg]

VHG 6 6 1000 52 7 0,20 130485

VHG 7 7 1500 55 10 0,30 130486

VHG 8 8 2000 55 10 0,30 130484

VHG 10 10 3150 80 12 0,90 130487

VHG 13 13 5300 103 15 1,70 130488

VHG 16 16 8000 131 18 3,40 130489

Parallel hooktype VHO(assembly with G-link)

Size For chains Carrying cap. L B E F Weigth Art. no.diameter per pcs[mm] [kg]* [mm] [mm] [mm] [mm] [kg]

VHO 6 6 1000 57 7,5 15 10 0,20 130494

VHO 7 7 1500 58 8,5 15 11 0,30 130495

VHO 8 8 2000 63 9,0 18 12 0,40 130496

VHO 10 10 3150 82 12,5 20 13 0,70 130497

VHO 13 13 5300 99 15 24 15 1,20 130498

VHO 16 16 8000 130 18 28 20 2,60 130499

L

B

B

L

E

F

* Safety factor 4:1


58

S - hook, openhigh-tensile, quality class 8carrying capacity is marked on the product

Carry. cap. Material B C D Weigth Art. no.Ø A per piece

[kg] [mm] [mm] [mm] [mm] [kg]

125 10 115 28 28 0,07 130500

250 12 153 38 38 0,18 130501

350 14 191 50 50 0,36 130502

500 16 229 63 63 0,72 130503

750 20 267 76 76 1,20 130504

1000 22 305 88 88 1,90 130505

1300 26 331 101 101 2,70 130506

1500 28 381 114 114 3,90 130507

2000 32 407 127 127 5,30 130508

2400 36 432 139 139 7,00 130509

2800 38 460 150 150 8,80 130510

S - hook, closedhigh-tensile, quality class 8carrying capacity is marked on the product

Carry. cap. Material B C D Weigth Art. no.Ø A per. piece

[kg] [mm] [mm] [mm] [mm] [kg]

125 10 115 28 28 0,07 130520

250 12 153 38 38 0,18 130521

350 14 191 50 50 0,36 130522

500 16 229 63 63 0,72 130523

750 20 267 76 76 1,20 130524

1000 22 305 88 88 1,90 130525

1300 26 331 101 101 2,70 130526

1500 28 381 114 114 3,90 130527

2000 32 407 127 127 5,30 130528

2400 36 432 139 139 7,00 130529

2800 38 460 150 150 8,80 130530

B

D

C

C

D

A

B

D

C

D

A

Information:These products can be delivered also in otherproportions - on order!


59

GEWA - burden traverse, type WTSwith 2 belaying hooksThese traverses have two firmly placed belaying hooks and a shackel in the middle suitablefor a loading hook according to DIN 15401.

Type Carrying capacity L H V W Weigth Art. no.[kg] [mm] [mm] [mm] [mm] [kg]

WTS 1010 1000 1000 290 115 70 18 147000

WTS 1020 1000 2000 310 115 70 32 147001

WTS 1030 1000 3000 290 115 70 63 147002

WTS 2020 2000 2000 345 115 70 65 147003

WTS 2030 2000 3000 365 115 70 100 147004

WTS 2040 2000 4000 385 115 70 150 147005

WTS 3020 3000 2000 425 150 90 80 147006

WTS 3030 3000 3000 440 150 90 125 147007

WTS 3040 3000 4000 465 150 90 180 147008

WTS 5030 5000 3000 540 190 120 170 147009

WTS 5040 5000 4000 560 190 120 250 147010

WTS 5050 5000 5000 580 190 120 350 147011

Information:Available also with 2-strand binding (onorder).

GEWA - traverse type WTVwith 2 sliding and revolving hooksThe shackle is suitable for a loading hook according to DIN 15401.

Type Carrying capacity L max. L min. R H V W Weigth Art. no.[kg] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

WTV 1010 01000 1000 0500 125 430 115 070 023 147040

WTV 1020 01000 2000 1000 100 450 115 070 038 147041

WTV 1030 01000 3000 1500 150 430 115 070 070 147042

WTV 2020 02000 2000 1000 100 460 115 070 073 147043

WTV 2030 02000 3000 1500 150 480 115 070 108 147044

WTV 2040 02000 4000 2000 200 500 115 070 160 147045

WTV 3020 03000 2000 1000 100 515 150 090 090 147046

WTV 3030 03000 3000 1500 150 530 150 090 135 147047

WTV 3040 03000 4000 2000 200 550 150 090 195 147048

WTV 5030 05000 3000 1500 150 630 190 120 185 147049

WTV 5040 05000 4000 2000 200 650 190 120 275 147050

WTV 5050 05000 5000 2500 250 670 190 120 385 147051


60

Information:Other carryingcapacities and sizesavailable on order!

Possibility to deliver also with 2-strand binding on order (binding chain, rope or textile)

GEWA - beam traverse, type WHTVwith 4 lengthwise and traverse adjustable hooksBeam traverse, type WHTV have 4 sliding revolving hooks.In the middle there is a shackle suitable for loading hookaccording to DIN 15401.

Type Car. cap. L max. L min. RL B max. B min. RB H V W Weigth Art. no. [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]

WHTV 202012 02000 2000 1000 100 1200 0600 100 0530 115 070 0131 147080

WHTV 203020 02000 3000 1500 150 2000 1000 125 0550 115 070 0200 147081

WHTV 204025 02000 4000 2000 200 2500 1200 130 0570 115 070 0275 147082

WHTV 302012 03000 2000 1000 100 1200 0600 100 0605 150 090 0155 147083

WHTV 303020 03000 3000 1500 150 2000 1000 125 0640 150 090 0250 147084

WHTV 304025 03000 4000 2000 200 2500 1200 130 0675 150 090 0360 147085

WHTV 503020 05000 3000 1500 150 2000 1000 125 0730 190 120 0345 147086

WHTV 504025 05000 4000 2000 200 2500 1200 130 0830 190 120 0465 147087

WHTV 505030 05000 5000 2500 250 3000 1500 150 0870 190 120 0640 147088

Available also with2-strand binding (onorder).

GEWA - cross traverse, type WKTdesigned for lifting and transport of Big-BagsOther proportions, carrying capacities and sizes on order.

Information:Other carryingcapacities and sizesalso available!

Type Carrying capacity Proportion A Art. no.[kg] [mm]

WKT 108 1000 1130 147120

WKT 109 1000 1270 147121

WKT 158 1500 1130 147122

WKT 159 1500 1270 147123


61

Traverse - special designupon your requirementsOur design engineers are glad to advice you and offer a suitable solution.

Copy this form and fill it in with required data.

We also offer special solutions. Consult our engineers.

1 2

Design: Please cross:

Beam traverse H-Traverse

Length: ______ mm Width: ______mm

Hook no.: ________________________

Sling no.: _________________________

Weigth cca. kg: ____________________

Company:

Name:

Street:

ZIP: City:

Phone no:

Fax:

Date:

Attention to:

3 4

Special hook Arm hook Revolving hook Hook with eye Belaying hook

1 2 5 6

Other information:


62

Endless straps 3 to.Perimeter 5 m (L = 2,5 m)at the frame of sling.

GEWA - lifting sling WHjmade from aluminiumEasily stored. Very simple installation. Perfect solution for lifting of burdens from ships and containers.

► Very low weigth (35 kg)

► Quick mounting and dismounting

► Easy storage

► Bargain-package

Availability► Sling with hooks

► 4 endless straps3 t, L1 = 2,5 m

Clamping point

Information:GEWA-handling loop or othersuitable binding devicesavailable.


Endless strap Binding chain or rope Connecting element with stirrup andpeg.

Car.cap. Weigth Proportions Heigth Tube material Material of connecting corners Tube dimmensions Art. no.[g] [cca. kg] [m] [m] [mm] incl. 4 endless straps

7000 35 2,4 * 2,4 1,8 AL SS 4104-06 AL SS 4253 75 * 4 142700

7000 35 2,4 * 3,0 1,8 AL SS 4104-06 AL SS 4253 75 * 4 142701

! Length 2,50 m

63

GEWA - wall jib cranefulfilling your wish

► Rotating range 180°

► Designed according to DIN 15018 (H2/B3)

► With electric traversing

► Compact construction

► Current leading up to the lifting device

► According to UVV, VDE and EG

► Carrying capacity:

► Heigth of lifting [H]:

► Distension [A]:

► Dimension of area:

► Material of wall:

► Thickness of wall: mm

► Iron - concrete support: x mm

► 1. Lifting speed:


► Rotating range degrees

Content: Supply fo wall jib crane

Our experienced designers are ready to give you advice and offerthe most suitable solution.

Copy this form and fill it in.

Following indicators that must be taken intoaccount:

Phone no.:

Fax::

Date:

Attention to:

Company:

Name:

Street:

Post code: City:

Operation:

Production ○ in-door ○ outdoor

Rotating ○ manual ○ electric

Carriage travel ○ manual ○ electric

Mounting ○ own ○ please offer


64

GEWA - jib cranefulfilling your wish

► rotating range 180°, 270°, 360°

► designed according to DIN 15018 (H2/B3)

► with electric traversing

► compact construction

► current leading up to lifting device

► according to UVV, VDE and EG

Content: Supply for jib crane

Our experienced designers are ready to give you advice and offerthe most suitable solution.

Copy this form and fill it in.

► Carrying capacity:

► Heigth of lifting [H]:

► Distention [A]

► Heigth of room:



► Rotating range degrees

Phone no.:

Fax:

Date:

Attention to:

Company:

Name:

Street:

Post code: City:

Following indicators that must be takeninto account:


Operation:

Production ○ in-door ○ outdoor

Rotating ○ manual ○ electric

Carriage travel ○ manual ○ electric

Mounting ○ own ○ please offer

65

GEWA - aluminium - gantry crane, type WPKPortable device!

Information:We offer bemas up to length 8000 mmin various modifications. on order.

► Light for transport

► Adjustable heigth

► Plug, not screwing, connectors

► Installation in short time

► Very low weigth

► Designed for lifting in places with difficult accesibility

Parts of delivery are: sidelong stands, aluminium beam and firmly placed crab. Without: tackle, lifting device and its accessories.

TYPE WPK 1, with collapsable sidesType Car. cap. Length of beam Point of Sidelong stands Weigth Art. no.

suspension of peg widthand traversing


WPK1-1000-1 1000 4000 1590-2690 1390 91 147850

WPK1-1000-2 1000 4000 1660-3010 1690 97 147851

WPK1-1000-3 1000 4000 2300-4050 2245 147 147852

WPK1-1500-1 1500 4000 1590-2690 1390 97 147853

WPK1-1500-2 1500 4000 1660-3010 1690 117 147854

WPK1-1500-3 1500 4000 2300-4050 2245 153 147855

TYPE WPK 2, with collapsable sides and double beam Type Car. cap. Length of beam Point of Sidelong stands Weigth Art. no.



WPK2-1000-1 1000 4000 1985-3335 1690 157 147856

WPK2-1000-2 1000 6000 1985-3336 1690 205 147857

WPK2-2000-1 2000 4000 2230-3480 1715 210 147858

WPK2-2000-2 2000 6000 2230-3480 1715 259 147859

WPK2-3000-1 3000 6000 2330-3480 2010 271 147870

WPK2-3000-2 3000 4000 2330-3480 2010 307 147871

TYPE WPK 3, mobile, with collapsable sidesType Car. cap. Length of beam Point of Sidelong stands Weigth Art. no.



WPK3-1000-1 1000 4000 1735-2135 1320 123 147872

WPK3-1000-2 1000 4000 2185-3035 1835 141 147873

WPK3-1000-3 1000 4000 2490-3790 2185 173 147874

WPK3-1500-1 1500 4000 1735-2135 1320 127 147875

WPK3-1500-2 1500 4000 2185-3035 1835 145 147876

WPK3-1500-3 1500 4000 2490-3790 2185 177 147877

TYPE WPK 4, same as WPK3, with double beamType Car. cap. Length of beam Point of Sidelong stands Weigth Art. no.



WPK4-1500-1 1500 6000 2060-2460 1320 231 147878

WPK4-1500-2 1500 6000 2510-3360 1875 239 147879

WPK4-1500-3 1500 6000 2875-4225 2220 271 147880

WPK4-1500-4 1500 8000 2060-2460 1320 257 147881

WPK4-1500-5 1500 8000 2510-3360 1875 275 147882

WPK4-1500-6 1500 8000 2875-4225 2220 307 147883

Type WPK 1

Type WPK 2

Type WPK 3

Type WPK 4


66

Special design:Inquiry necessary!

GEWA - aluminium tripodPortable device!

► Folding

► Teleskopic legs

► Leght for transportation

► Very low weigth

► Designed for lifting in places withdifficult accessibility

► Slipping-resistant (anti-slipping pads on legs)

► Installation in short time

Modification Carrying capacity Weigth Art. no.

[kg] [kg]

standard 1000 48 147885

s ručním navijákem 1000 74 147886

Modification with hand winch► Reels its own cylinder for fast handling upwards and downwards (reel is equipped with

rope and rotating hook).

► Reel can bedismantled quickly

► Length of rope 25 m

(All modification are without lifting device and other equipment)

GEWA - aluminium - traverselongitudial adjustable, with loading hook

► Hooks with axial bearing for rotating with load

► Fluently adjustement of maximal fork profile from 200/95 mm

► Maximal dimension of fork is from 880 mm, this traverse is applicable for almost all fork spikes.

Modification Car.cap. Weigth Art. no.

[kg] [kg]

1500 14 147887

3000 22 147888

Special design


67

GEWA - measuring device, type WLLXlight, compact and at a very reasonable in pricePower supply: three 1,5 V batteries

Equipment: device in stable plastic case (over 100 t in wooden casket)

GEWA - small crane scale, type WHextra light, portable and a package-bargain!Precision: ± 0,8 % v. E.

Measuring units: kg and daN

Power supply: two 1,5 V batteries

Basic equipment: bag with eye for belt, batteries, hook and manual handle (devices wihrange 50/100 kg have 2 hooks).

Lowest Art. no.Type Range value Weigth L * B * T

[t] [kg] [kg] [mm]

WLLX 0,25 0,1 1,1 190 * 083 * 056 140170

WLLX 0,50 0,2 1,1 190 * 083 * 056 140171

WLLX 1,25 0,5 1,1 190 * 083 * 056 140172

WLLX 2,50 1,0 1,4 214 * 083 * 056 140173

WLLX 5,00 2,0 1,9 234 * 090 * 056 140174

WLLX 12,50 5,0 3,8 310 * 110 * 058 140175

WLLX 25,00 10,0 6,6 360 * 134 * 068 140176

WLLX 50,00 20,0 15,0 440 * 164 * 098 140177

WLLX 100,00 50,0 46,0 660 * 260 * 118 140178

WLLX 250,00 100,0 215,0 905 * 424 * 248 140179

Accessories:

Remote controler for type WLLX

► Touch-pad

► Data displaying

► Switch of scale

Art. no.

with 10 m cord 140180

every other meter 140181

Information:We carry out yearly calibrations of all electrical crane scales andother measuring devices.Other equipment available on order.

08

Type Range Lowest value Weigth L x B x T Art.. no.[kg] [g] [kg] [mm]

WH020 020 0050 0,22 140 x 80 x 40 140550

WH050 050 0100 0,22 140 x 80 x 40 140551

WH100 100 0200 0,22 140 x 80 x 40 140552

WH200 200 1000 0,34 140 x 80 x 40 140553

GEWA - measureing device, type WLLZlight, compact and at a very reasonable in price!Precision: ± 0,8 % v. E.

Measuring units: kg, t und daN

Power supply: two 1,5 V batteries

Basic equipment: batteries, in a box, over 10 t in stable plastic case.

Type Range Lowest value Weigth L x B x T Art.. no.[t] [kg] [kg] [mm]

WLLZ 0,25 00,50 1,10 220 x 090 x 42 140560

WLLZ 0,50 01,00 1,10 220 x 090 x 42 140561

WLLZ 1,00 02,00 1,10 220 x 090 x 42 140562

WLLZ 2,00 05,00 1,30 233 x 090 x 48 140563

WLLZ 3,20 05,00 1,50 243 x 097 x 48 140564

WLLZ 6,40 10,00 2,30 275 x 115 x 48 140565

WLLZ 10,00 20,00 4,00 325 x 110 x 62 140566

WLLZ 20,00 50,00 7,00 371 x 134 x 72 140567


68

Handle with finger driver. Good ergonomic handles..

Handle with 3 functionsi:

Lifting-Travel-Decline

Frame and fork iron construction. Round ending of forks against damage ofpallets.Service life of cover

Radial bearing (2 RS).

Thickened piston rodagainst bending. Power ofspring controls the pistonrod.

Closed hydraulicssystem withintegrated magazine,pressure piston withmechanical protectionagainst damage. Safety valve. Trigger valve withgentle gear shifting.

Hand pallet truck, type HU Profi 25 T

Technical data/mark

Carrying capacity / burden Q [t] 2,5

Gravity centre of loading c [mm] 600

Distance of burden x [mm] 850

Wheel spacing y [mm] 1205

Weigth

Weigth of truck [kg] 74

Wheels

Pneumatics PUR/PA

Size of pneumatics in front [mm] 200 x 50

Size of pneumatics behind [mm] 80 x 63

Wheels, number in front/behind 2/4

Wheel spacing in front [mm] 135

Wheel spacing behind [mm] 370

Basic proportions

Lifting h3 [mm] 120

Heigth of drawbar in driving position max. h14 [mm] 1230

Heigth, reduces h13 [mm] 80

Total length l1 [mm] 1525

Length, incl. rear side of fork l2 [mm] 375

Total width b1/b2 [mm] 520

Proportions of fork s/e/l [mm] 51 x 150 x 1150

Fork - outer distance b5 [mm] 520

Center distance of wheels m2 [mm] 29

Working width of pallet 800 x 1200 Ast [mm] 1832

Turning radius Wa [mm] 1367

Performance data

Speed of decline with/without burden [m/s] dosing

Driving wheel wear- andabrasion-resistant, same asloading wheels. Droppingwheels are designed foreasy loading of pallets.

GEWA - hand puller trucktype HU Profi 25 T

► designed for professional transport of pallet burdens.

► carrying capacity up to 2500 kg

► safety handle for switching to various functions: Lifting–Travel–Decline

► sensitive burden decline with suitable speed

► maintained hydraulics with chromium piston and safety handle against overload

► very wear resistant wheels, equipment: driving rollers made of polyurethan, load rollers made of polyamide.

Art. no. 141902

Information:Other hand pallettrucks on order!Available also instainless design!


69

Pressure Pressure Effectiveforce force piston surface Max. cap. Heigth Outer

Class of cylinder Type Pressure traction Stroke Pressure Traction of oil hidden cylinder cylinder-Ø Weigth Art. no.[t] [kN] [kN] [mm] [cm2] [cm2] [cm3] [mm] [mm] [kg]

5 WYH-5/30 50 22 30 7,2 3,1 21 160 55 2,5 145090

5 WYH-5/80 50 22 80 7,2 3,1 57 210 55 3,3 145091

5 WYH-5/150 50 22 150 7,2 3,1 106 280 55 4,4 145092

10 WYH-10/30 100 45 30 14,3 6,4 44 175 67 4,0 145093

10 WYH-10/80 100 45 80 14,3 6,4 116 225 67 5,0 145094

10 WYH-10/150 100 45 150 14,3 6,4 218 295 67 6,7 145095

10 WYH-10/250 100 45 250 14,3 6,4 363 395 67 9,0 145096

20 WYH-20/50 200 100 50 28,6 14,3 142 195 85 7,0 145097

20 WYH-20/150 200 100 150 28,6 14,3 424 310 85 11,0 145098

20 WYH-20/250 200 100 250 28,6 14,3 707 410 85 14,0 145099

30 WYH-30/200 300 140 200 42,9 20,0 884 355 102 19,0 145100

30 WYH-30/350 300 140 350 42,9 20,0 1547 510 102 27,0 145101

50 WYH-50/150 500 220 150 71,5 31,5 1064 325 125 27,0 145102

50 WYH-50/350 500 220 350 71,5 31,5 2481 525 125 42,0 145103

50 WYH-50/500 500 220 500 71,5 31,5 3544 685 125 52,0 145104

70 WYH-70/150 700 330 150 100,0 47,2 1478 335 146 37,0 145105

70 WYH-70/350 700 330 350 100,0 47,2 3449 540 146 56,0 145106

GEWA - multipurpose cylinder, type WYH/WYSDouble-acting hydroulic cylinder 5 - 200 tMultipurpose hydraulic cylinder with fast hydraulic backstroke, and therefore ideal build-up ofpresses, device for mounting and all multipurpose usage under big pressure and tractive force.

► Maximumoperating pressure 700 bars

► Double-acting with hydraulic backstroke

► Incl. coupling sleeve and pressure die

► Double bronze conduct of piston rod, hardly chromium-plated

► Cover and piston rod made of Cr-Mo steel

► Bigger cylinders with carrying eyes

► With metical fastening thread

with hydraulic backstroke WYH

Effective Max. cap. Heigth OuterClass of cylinder Type Pressure force Stroke piston surface of oil hidden cylinder cylinder-Ø Weigth Art. no.[t] [kN] [mm] [cm2] [cm3] [mm] [mm] [kg]

005 WYS-5/15 0050 015 007,2 0011 045 041 0,9 145000

005 WYS-5/25 0050 025 007,2 0018 097 042 1,0 145001

005 WYS-5/75 0050 075 007,2 0053 157 042 1,5 145002

005 WYS-5/127 0050 127 007,2 0090 214 042 2,0 145003

005 WYS-5/180 0050 180 007,2 0127 267 042 2,4 145004

010 WYS-10/25 0100 025 014,3 0037 090 057 1,6 145005

010 WYS-10/50 0100 050 014,3 0073 125 057 2,1 145006

010 WYS-10/100 0100 100 014,3 0146 178 057 2,8 1450070

with spring reverse WYS

Attention!WYS up to 100 tavailable on order!


70

GEWA - universal lifting device, type WJH► Robust and resistant construction

► Sensitive outlet ball valve

► Additional spindle stroke

► Grooved pressure nut and large, stable basement

max.Type Car. cap. Heigth Stroke Spindle Heigth Weigth Art. no.

[t] [mm] [mm] [mm] [mm] [kg]

WJH-2 02 181 115 50 346 002,7 145515

WJH-4 04 205 126 60 391 003,7 145516

WJH-6 06 219 130 75 424 004,7 145517

WJH-8 08 225 152 70 447 005,7 145518

WJH-12 12 240 153 80 473 008,0 145519

WJH-20 20 240 153 80 473 011,0 145520

WJH-30 30 280 180 - 460 022,0 145521

GEWA - hydraulic manual pump,type WHPS/WHPH 700 bars

for single action cylindersPower capacity

Type Oil capacity 1. stage 2. stage Weigth Art. no.[cm3] [cm3] [cm3] [kg]

WHPS-1/0,7 00700 0- 2,0 07,0 145230

WHPS-2/0,3 00300 05 1,0 03,5 145231

WHPS-2/0,7 00700 11 2,0 07,0 145232

WHPS-2/2,0 02000 11 2,0 10,0 145233

WHPS-2/4,00 04000 11 2,0 13,0 145234

WHPS-2/6,5 06500 11 2,0 21,0 145235

WHPS-2/10,0 10000 11 2,0 27,0 145236

for double action cylindersPower capacity

Type Oil capacity 1. stage 2. stage Weigth Art. no.[cm3] [cm3] [cm3] [kg]

WHPH-2/0,7 00700 11 2,0 08,0 145240

WHPH-2/2 02000 11 2,0 11,0 145241

WHPH-2/4 04000 11 2,0 11,0 145242

WHPH-2/6,5 06500 11 2,0 22,0 145243

WHPH-2/10 10000 11 2,0 28,0 145244

► Maximal operational pressure 700 bars

► Double stage with rapid run

► Big capacity of tank

► Limitation of pressure valve, adjustable from outside

► Drainage valve with possibility of sensitive regulation

► Including oil tank

► Quality, all metal construction

► WHPH-Pump with 4/3 valve

Double stage capacity powerWJH-50-2 50 305 178 - 483 53,0 145522


71

Type Packing Art. no.Liter

WHFY-1 01 145415

WHFY-5 05 145416

WHFY-10 10 145417

WHFY-20 20 145418

GEWA - hydraulic hose type WHH/WHHCsecure and practical connection

Type Length Operatin pressure End Art. no.[m] [max. bar]

WHH-005 0,5 700 oboustranně 3/8 NPT 145339





WHHC-005 0,5 700 Zástrčka spojky 145540





GEWA - hydraulic oilquality starts with oil

3/8 NPT, outside

Vazební zástrčka CM4-1

Help with choice:

Hydraulic hose for standard combinations (Pump –hose – cylinder)

► Make order of standard hose with connector plug (type of hose WHHC-20)

Hydraulic hose should be two-sided connectable (two-sides connector plugs)

► For long hoses we recommend to order additional set of standard connectors WHHC / CCY-1

Hydraulic extension hose (first side - connector plug, second side - plug sleeve)

► Order standard WHHC-…-hose of any length and additionally plug sleeve CFY-2

Hydraulic hose without parts of connection

► These types can be also deliver: WHH-…, two sided 3/8-NPT outside

Notice: Steam gauge, connectors, screwing and further accessories can be deliveed on order.


72

GEWA - hydraulic lifting device, type WJH-Pand WJH-G plusbig weights, secure lifting

► Reduced fringe thanks to mobile feet.

► Minimal service costs, easy maintanance because of detachable pump and changeable leading feet.

► Extremely low weigth and high power thanks to quality material and progressive construction

► Controlled volume outlet screw.Thanks to the mobile foot, the burden can beoptimally placed.

Additional characteristic of serie WJH-P:

► Low weigth and high power.

► Pop-up feet, optimal stability and position.

► Balanced lay-out of lifting device and burder through integrated double pistons .

► Easy usage of the whole range of liftingwithout risk of incorrect foot adjustment.

Type WJH 5 G plus WJH 10 G plus WJH 15 G plus WJH 20 G plus

Carrying capacity [kg] 5500 10000 15000 20000

Lowest heigth with foot h1 [mm] 12 15 20 20

Highest heigth with foot h2 [mm] 157 180 205 225

Heigth incl. head board H1 [mm] 245 275 310 340

Adjustability of foot V [mm] 6 * 29 5 * 41 5 * 46 5 * 51

Foot width * foot depth [mm] 50 * 59 60 * 54 70 * 70 80 * 66

Heigth of stroke [mm] 140 150 175 190

Proportion L2 x B x H2 [mm] 326 * 233 * 280 346 * 247 * 310 401 * 322 * 310 425 * 322 * 340

Proportion L1 [mm] 311 330 401 405

Weigth [kg] 23 29 48 60

Piston volume [cm3] 176 300 495 731

Art. no. 142600 142604 142605 142606

Notice:This is only a sample of availableproducts. Other carrying capacities,are also available.

Type WJH 30 P WJH 50 P

Carrying capacity [kg] 30000 50000

Lowest heigth with foot h1 [mm] 25 35

Highest heigth with foot h2 [mm] 185 275

Heigth incl. head board H1 [mm] 455 542

Maximal heigth of lifting h2 [mm] 200 250

Foot width * foot depth [mm] 95 * 70 100 * 85

Heigth incl. head board H2 [mm] 655 792

Proportion L2 x B [mm] 290 * 305 354 * 380

Weigth [kg] 51 105

Piston volume [cm3] 1130 2512

Art. no. 142601 142602


73

Burden weigth up to totally 6 to totally 12 to totally 18 to totally 24 toType WJLB 3 K WJFB 3 K WJLB 6 K WJFB 6 K WJL 9 K WJFB 9 K WJL 12 K WJFB 12 K

Carrying capacity [kg] 3000 3000 6000 6000 9000 9000 12000 12000

Number of wheels [piece] 4 4 8 8 12 12 16 16

Proportions of wheels Ø x L [mm] 85 * 85 85 * 85 85 * 85 85 * 85 85 * 85 85 * 85 85 * 85 85 * 85

Weigth [mm] 110 110 110 110 110 110 110 110

Carrying area /sheet [mm] - 120 * 80 - 175 * 170 - 175 * 170 - 175 * 170

Sheet proportions L x B [mm] - 190 * 125 - 325 * 200 - 325 * 390 - 325 * 390

Connection stick with joint L [mm] - 1000!! - 1030 - 1230 - 1230

Plate adjustment from – to [mm] - 125 – 880 - 400 – 830 - 400 – 1030 - 400 – 1030

Carry.area of revolving plate Ø [mm] 150 - 150 - 170 - 170 -

Proportions L x B [mm] 225 * 280 - 445 * 590 - 580 * 820 - 580 * 1000 -

Pulling stick with eye L [mm] 990! - 1120 - 1120 1120 -

Weigth JUWAthan [kg] 12 11 33 27 54 35 64 39

Art. no. with JUWAthan®plus-surface 142608 142609 142610 142611 142612 142613 142614 142615

Art. no. with steel wheels 142620 142621 142622 142623 142624 142625 142626 142627

WJLB 3 K

Steel wheels:for rough floor

Aluminium core with JUWAthan®plus surface:for further floors

WJLB 6 K - WJL 12 K

WJFB 12 K

!without pulling eye ! without joint

Connection pulling stick are delivered inseries

Wheels - recommended usage Type of wheels and surface Type of wheels JUWAthan®plus and steel surfaceJUWAthan®

Even, smooth and clean floor(2 years guarantee)

Dirty floor with tiny unevenness(2 years guarantee)

Very uneven, very dirtyfloor in bad condition

WJL 12 K

GEWA - transport burdentruck, type WJFB a WJLBAdjustable and controllable for transportingburdens up to 24 tons

► Designed for transport in halls and warehouses

► Driving rod, is under carriage is equiped with connecting piston rod.


74

Multifunctional rope reel Yale-tracwith lever

Traction Rope shift Strength of lever Weigth Art. no. (safe for at safe Length without without rope

Type working) double lifting working of lever Rope-Ø rope[kg] [mm] [kg] [mm] [mm] [kg]

Y 08 0800 60 24 800 08,4 07 141180

Y 16 1600 60 30 790/1190 11,5 14 141181

Y 32 3200 40 50 790/1190 16,0 21 141182

Care of:Maintenance shouldbe done by ourexperiencedtechnicians .

Type Y 08 Type Y 16 Type Y 32

GEWA - rope reel, type LMtraction from 500 do 900/1800 kg

► Series of light tightening and tensing devices

► Low weigth and rust protection thanks to light metal casts.

► Warranted function thanks to stop catch with double gear.

► All axles are constantly lubricated, i.e. they are wear resistant.

► All springs and axles are made of stainless steel.

► Zinc-coated special rope used as a carrying device.

► High-strength mounted carrying and burden hooks, correspond with

the series of belaying clamps and hooks and are revolving about 360°.

Attention!LM-rope reel aredesigned fortightening andtensing work only. They are notdesigned for liftingburdens.

1-strand 2-strandTraction Track High Traction Track High Netto Length Hook Art. no.

Type weigth of lever opening Rope[kg] [m] [mm] [kg] [m] [mm] [kg] [mm] [mm] [mm]

115 D-V 500 4,6 550 1000 2,3 700 4,5 420 22 4,8 141207

202 WN-V 500 6,0 525 1000 3,0 690 5,2 520 22 4,8 141208

434 WN-V 500 9,0 550 1000 4,5 710 5,8 530 22 4,8 141209

S 434 WN-V 700 6,0 565 1400 3,0 725 6,0 530 22 5,6 141210

S 404 WN-V 900 5,2 575 1800 2,6 720 5,9 635 22 6,4 141211

! With back block is for with 2-strand usage

Fastening possibilities

Rope clamp, type LMGtraction 2.000 - 5.000 daN,for ropes to 1650 N/qmm, ribbed jaws

for Art. no.Type Traction ropes-Ø Tow eye Weigth

[daN] [mm] [mm] [kg]

LMG I 2000 5-15 31 x 44 1,6 141250

LMG II 3000 8-20 31 x 44 2,9 141251

LMG II-X 3000 8-20 31 x 44 2,9 141252

LMG III 5000 18-32 66 x 93 9,5 141253


75

GEWA-cog wheel-manual rope wheel, type WGR 250 to 2500 kg

Car.cap. Rope Rope Rope Rope1. layer last diameter length (max. Number Load Crank Art. no.

layer 1.layer length) of layers on crank revolution Weigth without rope[kg] [kg] [mm] [m] [m] [kg] [mm] [kg]

1250 150 04 2,7 22 6 15 185 08 140280

1400 300 05 5,3 40 6 10 035 16 140281

1750 500 07 4,0 20 4 13 035 16 140282

1250 1000 09 6,7 35 4 12 024 38 140283

2500 2000 13 8,0 30 3 13 013 60 140284

GEWA - manual rope reelsafe · practical · budget-priced

Manual rope reel, type 628 – zinc-coated

Allowed Pressure Necessaryload of crank steel ropes Weigth Art. no. [kg] [N] [kg] without rope

650 195 28 m/Ø 6 mm8,8 142044 Crank with fixed crank

650 195 28 m/Ø 6 mm8,8 142045 Adjustable crank

650 195 28 m/Ø 6 mm8,8 142046 Crank for secure rope disconnection

Manual rope reel, type 625E – stainlessAdjustable crank (hard chromium plating), for usage at food-processing and chemical industry.

Allowed Steam Necessaryload pressure steel ropes Weigth Art. no.[kg] [N] [kg] without rope

695 195 28 m/Ø 6 mm 8,8 142047

type 604

Rope rell, type 604► Including self-locking worm-gear unit

► Water resistant

► Including maintenace-free ball bearing

► Press up lock seat lever

Allowed load Preassure of crank Necessary rope Weigth Art. no.[kg] [N] [kg] without rope

400 180 04 m/Ø 6,0 mm 06 142030

500 138 14 m/Ø 6,5 mm 12 142031


76

type 611 and type 812

type 713

Care of:Different designdelivered on order.Allreels are deliveredwithout ropes.


0300 190 11 m/Ø 6,0 mm 10 142032

0500 210 10 m/Ø 6,5 mm 10 142033

0750 200 12 m/Ø 8,0 mm 14 142034

1000 180 10 m/Ø 9,0 mm 15 142035


2000 320 8 m/Ø 12,0 mm 23 142040

3000 300 7 m/Ø 13,0 mm 32 142041

Rope reel, type 611 varnished► Including frontal geared transmission

► Storable

► Without return motion, safety lever with collapsable crank

Rope reel, type 713► With multistage transmission

► For heavy burdens

► Without return motion,safety lever with collapsable crank

Pevnost Návin Návin cranks power Weight Art. no.lana v tahu Rope-Ø ! 1. layer 6. layer 1. layer Špulky-Ø without rope without[kg] [mm] [m] [m] [daN/kg] [mm] [cca. kg] rope

063 3 2,0 20 10 40 3 146165

125 3 2,0 20 12 40 3 146166

250 4 1,4 14 16 46 5 146167

!At rope tenacity from 1770 N/mm2

GEWA - aluminium-rope reel, type H 75All important constructional parts made of aluminium

► Both sides service

► All-round cvoer

► Noiseless brake

► Automatic brake adjustment

► Self-fastening rope wedge

► Enhanced rope endurance thanks to bid diameter of spool of rope

► German certificate of origin

► Manual lever is removable beneath burden


77

GEWA - elektric rope tackleMINIFOR® portable motor rope tackleMINIFOR® s 2,5 m trailing cable, whim with 10 m rope, hooks, 2 terminal switches with imbus spanner

► Light and carry-on

► For lifting with a rope however long!

TR 11/31, including sheet-metal boxCarry. cap. Rope-Ø Speed of Kind of Power Weigth Art. no.

Type lifting drive[kg] [mm] [m/min.] 1) [kW] [kg]

Tr 11 100 6,5 15 W 0,37 21 140240

Tr 31 300 6,5 5 W 0,37 21 140241

Increased price for extra meters of trailing cable 5 x 1,5 mm2 (Tr 11/31) 140251

Increased price for plug-in cable 140252

Spring with adjustable ring for terminal switch (Tr 11/31) 140253

Tr 30 S/50, including cardboard packageCarry. cap. Rope-Ø Speed of Kind of Power Weigth Art. no.

Type lifting drive[kg] [mm] [m/min.] 1) [kW] [kg]

Tr 30 S 300 6,5 12 W 1,1 31,6 140242

Tr 30 S 300 6,5 12 D 1,1 31,6 140243

Tr 50 500 6,5 7 W 1,1 31,6 140244

Tr 50 500 6,5 7 D 1,1 31,6 140245

Increased price for extra meters of trailing cable 7 x 1,5 mm2 (Tr 30S/50) 140246

Increased price for plug-in cable 140247

Spring with adjustable ring for terminal switch (Tr 30S/50) 140248

1) W = 230 V AC ; D = 400 V, rev current, 60% ED

MINIFOR® - ropesWith prong, hook and 1 spring and adjustable ring for terminal switch, also for the weigth of a ropelonger than 20 m (6,5 mm Ø). MINIFOR®-ropes available in each length.

Type Rope-Ø Art. no.[mm]

Rope á m 6,5 107172

Weigth of rope logner than 20 m (6,5 mm Ø) 140250

Manual winch

Tr 11

Tr 31

Tr 30 S

Tr 50

Round winch

Max. wound rope with diameterArt. no.

Type 6,5 mm 8 mm 9 mm 10 mm 11,5 mm 14 mm 16 mm[m] [m] [m] [m] [m] [m] [m]

Manual winch size 0 050 030 025 020 00- 00- 00- 140260

Manual winch size 1 00- 060 050 040 030 00- 00- 140261

Manual winch size 2 00- 00- 00- 00- 00- 030 020 140262

Round winch 200 250 150 130 110 080 060 045 140263

Round winch 300 380 240 200 170 120 090 070 140264

Round winch 400 540 340 300 260 200 130 100 140265

Round winch 400 540 300 300 200 120 130 100 140266mobile, wheel-Ø180 mm

Round winch 500 680 430 340 300 240 160 120 140267

Round winch 650 850 540 400 360 300 200 150 140268

Reel® manual-/round winch


78

Type Car.cap. Range of grip Weigth A B C D E F G Art. no.[t] [mm] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

TBL 0,5 0,5 0-16 1,5 099 195 29 33 47 50 48 144000

TBL 1,0 1,0 0-20 3,0 126 225 50 49 70 82 55 144001

TBL 2,0 2,0 0-32 9,3 192 312 80 75 96 100 81 144002

TBL 3,0 3,0 0-32 9,3 192 312 80 75 96 100 81 144003

Important!The surface of a sheet-metal must beunder limit of hardness HRC 30!

Note:TBL 0,5 is with spring tension, i.e.delivered without safety stop lever.

Range of grip

GEWA - safety sheet-metal gripper, type TBLwith safety stopSafety gripper must press the burden tightly. The tighter the grip, the safer the transport. GEWA-sheet-metal gripperoffers complete safety of the grip. Detrited jaws with sharp spikes are designed to grip sheet-metals. GEWA-sheet-metal gripper is equipped with a safety stop operated by a hand lever.

TBL 0,5 t TBL 1-3 t

Warning:This gripper is designed for verticaltransport of separate sheet-metalsand steel boards, also for lifting andturning up to 180°.When transporting large or longsheet-metals they can bear down. Werecommend to use pairs of sheet-metals for balancing or to use atraverse.


79

Type Car.cap. Range of grip Weigth A B C D E F G Art. no.[t] [mm] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

TBs 1,0 1,0 0-20 04,6 126 270 50 49 70 095 63 144006

TBs 2,0 2,0 0-32 14,0 192 382 80 75 96 132 92 144007

TBs 3,0 3,0 0-32 14,0 192 382 80 75 96 132 92 144008

100% 100%

90º 90º

0º

100%

90º 90º

0º

45º22º 22º

45º

75%75%

50% 50%

Range of grip

GEWA - safety sheet-metal gripper,type TBswith safety stopping lock and exeThis gripper can hold sheet-metals horizontally, vertically and sideward.Thanks to the sliding eye the grip is always optimal - see the diagram.

This gripper is equipped with an safety stopping lever which enables tofasten onto the gripper on the sheet-metal.

The gripper can be used not only for transport of sheet-metals but alsofor turning in constructions.

Note:Other modifications available onorder.

Important!The surface of sheet metalmust be under limit of hardnessHRC 30!


80

Multihook with eyestype WDOUse in case you have thick a diameter of binding means or suspension head. Multihookcan be used in common crane hooks.

Advantages:

► No pressed binding instruments

► Safety thanksburnt steel construction ST 52-3

► Even load distribution

► Safety thanks to2 stable locks.

Screwing grippers, type TShfor vertical and horizontal draw

Suspension clamp is part of order.

Type Carry. cap Range of grip Weigth Art. no.[kg] [mm] [kg]

TSh 0,75 0750 0-30 03,1 144044

TSh 1,5 1500 0-32 07,4 144045

TSh 3,0 3000 0-50 11,4 144046

TSh 5,0 5000 0-80 27,6 144047

Type A B C D F G[mm] [mm] [mm] [mm] [mm] [mm]

TSh 0,75 190 052 19 043 113 35

TSh 1,5 255 065 26 075 130 44

TSh 3,0 290 074 30 085 170 50

TSh 5,0 470 130 50 135 225 72

Screwing grippers, type TSdfor 3-dimension direction of drawlift and draw

Type Carry. cap Range of grip Weigth Art. no.[kg] [mm] [kg]

TSd 1,5 1500 0-35 4,8 144040

TSd 3,0 3000 0-35 8,1 144041

TSd 5,0 5000 0-40 14,5 144042

TSd 7,5 7500 0-40 18,1 144043

Important!The surface of sheet metalmust be under limit ofhardness HRC 30 !

Carry. cap. a b c d e f Art. no.číslo

[kg] [mm] [mm] [mm] [mm] [mm] [mm]

800 60 235 120 62 90 140 138000

1250 60 250 130 62 90 155 138001

2000 80 300 160 70 120 180 138002

2500 80 320 170 70 120 200 138003

3000 90 340 182 75 140 220 138004

4000 90 400 214 80 140 240 138005

5000 100 435 227 85 160 260 138006

8000 140 594 330 120 230 320 138007

10000 160 650 335 130 260 355 138008

a

cb

d

e

f

maximal safety!

Type A B Ø C D E F G[mm] [mm] [mm] [mm] [mm] [mm] [mm]

TSd 1,5 191 35 24 16,0 60 105 50

TSd 3,0 235 46 34 17,0 67 120 60

TSd 5,0 275 55 40 18,0 85 150 75

TSd 7,5 295 65 50 22,0 92 162 80


81

Car. cap. Number Modification Clamping Width Length Art. no.Type of shrouds range of shaft of sling Weigth

[kg] [ks] [mm] [m] [m] [cca. kg]

WSZA2 2000 2 toothed 60-180 0,8 - 2,0 1,45 028 142391

WSZA3 3000 3 toothed 60-180 0,8 - 2,0 1,45 040 142392

WSZA3L 3000 3 toothed 60-180 0,8 - 2,8 2,05 041 142393

WSZA4 4000 4 toothed 60-180 0,8 - 2,5 1,45 055 142394

GEWA - pipe grippers, type WSZAnew generation: grippers with big overlapfor optimum safety

Grippers WSZA are used for transport and conrete staves.

Positioning of stamping range is not necessary any more.

Accidents caused by wrong positioning of clips are excluded.

Grippers WSZA can be used for all pipes and staves

► Thin-walled staves and pipes

► Staves and pipes according to DIN 4034, part 1

► Staves and pipes according to DIN 4034, part 2

► Symmetrical transitional shafts according to DIN 4034

► Asymmetrical transitional shafts according to DIN 4034

Warning:Other modifications available onorder. For smooth surfaces it isnecessary to order grippers withrubber surface finnishing on theirteeth!

Simple clamping and unlocking thanks to open holder: Not necessary to lift a clip

No positioning of stamping range

Big overlaps guarantee optimum safety

One gripper for shaft according to DIN 4034 part 1 and 2

With spring overstain

Handling loop instead of chain: low weigth

Positioning of stamping

Safety lock for clamping andunlocking

ShaftsDIN 4034 T 1

ShaftsDIN 4034 T 2


82

GEWA - pipe grippers, type WRSV

Hanging for shaft pipes according to DIN 4034 part 2Car. cap. Number of Jaws Clamping Nominal Chain Weigth Art. no.

Type clips modification range pipe diameter length[kg] [pcs] [mm] [m] [m] [cca. kg]

WRSV 1,5 1500 3 Steel section 40-120 0,4-2,0 1,5 31 142305

WRSVL 1,5 1500 3 Steel section 40-120 0,4-3,0 2,0 33 142304

WRSVG 1,5 1500 3 Rubber surface 0- 70 0,4-2,0 1,5 34 142308

WRSV 3 3000 3 Steel section 50-180 0,4-2,0 1,6 53 142306

WRSVL 3 3000 3 Steel section 50-180 0,4-3,0 2,2 57 142307

WRSVG 3 3000 3 Rubber surface 00-130 0,4-2,0 1,6 55 142309

WRSVT 4 4000 4 Steel section 50-180 1,0-2,5 1,6 82 142303

Hanging for shaft pipes according to DIN 4034 part 1 and part 2Car. cap. Number of Jaws Clamping Nominal Chain Weigth Art. no.

Type clips modification range pipe diameter length[kg] [pcs] [mm] [m] [m] [cca. kg]

WRSV 3/200 D 3000 3 Steel section 90-200 0,4-2,0 1,6 65 142312

WRSVL 3/200 D 3000 3 Steel section 90-200 0,4-3,0 2,2 69 142313

Information:Other modifications available on order. For smooth,painted or modified surfaces we deliver grippers withrubber finnishing of clips.

Problem: shifting ofcomplete elementsaccording to DIN 4034 part1 with shaped connectinglink with gasket.

Solution: pipe gripperWRSV…D with followingadvantages:

Rubber shock-absorber due toconcrete parts will not bedamaged.

Clamping proportion increased from 220 mmto 260 mm.

Clamping range 90-200 mm (with rubbersurface 50-150 mm).

Hanging from series WRSV 3 is developedand intended also for common shaft pipes.


Hand lever for easymanipulation.

Tightening clamp madeof hollow material, sothat it is resistant againstflipping over and it haslow weigth

According tocustomer´s wish it ispossible to rubberizethe surface oftightening clamp.Then, it cannotdamage pipes withsurface finish.

Adjustable clamping -easy and fast due tothread spindle.

High-strength chains DIN 5687-5 are used

Enhanced stabilitydue to bent hingedlever.

With safety lock andspring in eachtightening clampunintentional releaseof jaws is prevented.

83

Car. cap. Clamping Span Pressure line A B C D Weigth Art.. no.Type range Z E F

[kg] [mm] [mm] [mm] [mm] [mm] [Ø mm] [mm] [kg]

WBTG 1,5/120 1500 40-120 165 100 35 135 75 18 180 142320

WBTG 3,0/180 3000 50-180 245 175 90 180 100 26 310 142321

WBTG 3,0/220 3000 90-220 245 175 94 180 100 26 310 142322

* 3-strand hanging determined for transport

GEWA - pipe clampin various modifications. on order!

GEWA - grippers for transport,type WBTGCarrying capacity 1500-3000 kgOne binding device designed for vertical transport of concretepipes and shaft staves must fulfill many features for transport. Itmust be able to work in the hardest conditions and to beabsolutely safe but at the same time easy to handle.

Grippers for transport meet these requirements . 3-strandgripper is used for concrete pipes up to Ø 2000 mm and 3000kg and is absolutely safe. Span of clips is 40-220 mm.

► Stable design

► Fourfold safety against break through

► Simple and safe handling

► Big clamping range

► For tough conditions

► Low weigth

► Easy service

Information:For conrete pipes according DIN 4034. For concrete pipes with Ø 3000 mmavailable on order


84

GEWA - permanent - burned magnet,type WX/WGdesigned for round steel and flat materials

in sizes from 125 kg to 2000 kg

► Suitable for round steel 40%

► Safety factor 3

► Thanks to bevels of pole shoe the burden magnets are designed esp. for materials with good surfaces

► When lifting burdens which may bend we recomend to use traverse and 2 magnets

► Maximum operational temperature 80°C.

Magnet Permitted carrying capacityFlat materials Round steel

Proportions Weigth car. cap. Thickness car. cap. Ø Thickness of walls Art. no.Type [mm (L x B x H)] [kg] [permitted kg] [min. mm] [permitted kg] [max. mm] [min. mm]

WX 125 121 * 079 * 185 03,5 0125 20 050 050-200 10 142419

WX 250 181 * 079 * 142 06,0 0250 20 100 050-300 10 142407

WX 500 242 * 106 * 189 16,0 0500 25 200 080-400 15 142408

WX 1000 339 * 133 * 228 36,0 1000 40 400 100-450 25 142409

WX 1500 416 * 166 * 293 66,0 1500 45 600 100-500 30 142410

WX 2000 441 * 186 * 314 80,0 2000 55 800 120-600 35 142411

WG 150 189 * 079 * 185 06,0 0150 08 060 050-300 08 142422

WG 300 250 * 106 * 189 16,0 0300 10 120 080-400 10 142423

GEWA - sucking disks, type Vfor lifting, carrying and holding to have everything under controlStandard (S): for smooth parts, e.g. glass plates, marble....

Sealing lobe (D): for rough, structured, slightly arched surfaces, e.g. ornamental glass…

Car. cap. Car. cap. Art.. no. Art.. no.Type Modification (S) standard (D) Lobe Sucking lobe Weigth (S) (D)

[kg] [kg] [Ø cca. mm] [kg] Standard Sealing lobe

V1K-S/D 1 part, plastic 030 - 120 0,32 142735 -

V1A-S/D 1 part, Alu 030 20* 120 0,55 142736 142746

V2K-S/D 2 part, plastic 060 - 120 0,66 142737 -

V2A-S 2 part, Alu 060 - 120 1,06 142738 -

V2AS-S/D 2 part, Alu, with separator 070 40* 120 1,03 142739 142744

V2KG-S 2 part, plastic 045 - 120 0,75 142740 -with joint

V3A-S 3 part, Alu 100 - 120 1,57 142741 -

Following data are valid for steel, class C40 It is necessary to respect the reduction of the carrying capacity.

Information:Other modifications, incl. stainless, available on order!

V3A V2KG V2AS V2A V2K

V1A

V1K

Type WX/WG

(Colors deviation is possible)

! Carrying capacity vertically !!Carrying capacity sideways


85

GEWA - steel reels/tooth reels

Tooth reels used for decades is in accordance with DIN-7355

Steel reel according to DIN 7355 with safety handleType Allowed Heigth Heigth Weigth Art. no.

car.cap.[t] [mm] [mm] [kg]

W 11.1,5 S 01,5 725 350 13,0 142000

W 11.3 S 03,0 725 350 20,0 142001

W 11.5 S 05,0 725 300 27,0 142002

W 11.10 S 10,0 800 300 42,0 142003

Steel reel according to DIN 7355 with fuse gripType Allowed Heigth Heigth Weigth Art. no.


W 11.1,5 R 01,5 725 350 13,0 142006

W 11.3 R 03,0 725 350 20,0 142007

W 11.5 R 05,0 725 300 27,0 142008

W 11.10 R 10,0 800 300 42,0 142009

Short deisgn, with safety handleType Allowed Heigth Heigth Weigth Art. no.


W 11.1,5 KS 01,5 600 300 11,0 142012

W 11.3 KS 03,0 600 300 18,5 142013

W 11.5 KS 05,0 600 300 23,5 142014

Short design, with fuse gripType Allowed Heigth Heigth Weigth Art. no.


W 11.1,5 KR 01,5 600 300 11,0 142015

W 11.3 KR 03,0 600 300 18,5 142016

W 11.5 KR 05,0 600 300 23,5 142017

Steel reel, with adjustable tooth lifting handlerType Allowed Heigth Heigth Weigth Art. no.


W 1188.1,5 S 01,5 725 350 16,5 142018

W 1188.3 S 03,0 725 350 22,0 142019

W 1188.5 S 05,0 725 300 32,0 142020

W 1188.10 S 10,0 800 300 52,0 142021

Steel reel, with adjustable tooth fuse gripType Allowed Heigth Heigth Weigth Art. no.


W 1188.1,5 R 01,5 725 350 16,5 142022

W 1188.3 R 03,0 725 350 22,0 142023

W 1188.5 R 05,0 725 300 32,0 142024

W 1188.10 R 10,0 800 300 52,0 142025

Informace:other designs / inbetweensizes on demand

GEWA - tooth reelsCarrying capacity 10.000 kgCar. cap. Car. cap. Max. Manual power Netto weigth Art. no.in total of handle lifting[kg] [kg] [mm] [kg] [kg]

10000 7000 800 45 31,1 141950

Steel reel

Tooth reel


86

GEWA - DUPLO - endless loopmade from polyester DIN 61360/DIN-EN 1492-2,reinforced coating cover, loads distinguished by colour and stripes


Means of fastening Carrying capacity - WLL (t) with Carrying capacity - WLL (t) withone endless loop two endless loops

directly reevedType simple paralel *Angle ß *´Angle ß *Angle ß *Angle ß

diretly reeved from 7 - 45° 45 - 60° from 7 - 45° 45 - 60° from 7 - 45° 45 - 60° from 7 - 45° 45 - 60°

** ColourBinding- 1,0 0,8 2,0 1,4 1,0 0,7 0,5 1,4 1,0 1,12 0,8faktor

0,5 t orange 0,5 t 0,4 t 1 t 0,7 t 0,5 t 0,35 t 0,25 t 0,7 t 0,5 t 0,56 t 0,4 t

1 t violet 1 t 0,8 t 2 t 1,4 t 1 t 0,7 t 0,5 t 1,4 t 1 t 1,12 t 0,8 t

2 t green 2 t 1,6 t 4 t 2,8 t 2 t 1,4 t 1,0 t 2,8 t 2 t 2,24 t 1,6 t

3 t yellow 3 t 2,4 t 6 t 4,2 t 3 t 2,1 t 1,5 t 4,2 t 3 t 3,36 t 2,4 t

4 t grey 4 t 3,2 t 8 t 5,6 t 4 t 2,8 t 2,0 t 5,6 t 4 t 4,48 t 3,2 t

5 t red 5 t 4,0 t 10 t 7,0 t 5 t 3,5 t 2,5 t 7,0 t 5 t 5,60 t 4,0 t

6 t brown 6 t 4,8 t 12 t 8,4 t 6 t 4,2 t 3,0 t 8,4 t 6 t 6,72 t 4,8 t

8 t blue 8 t 6,4 t 16 t 11,2 t 8 t 5,6 t 4,0 t 11,2 t 8 t 8,96 t 6,4 t

10 t orange 10 t 8,0 t 20 t 14,0 t 10 t 7,0 t 5,0 t 14,0 t 10 t 11,20 t 8,0 t







* Angle ß reduces permitted carrying capacity. Angle that is bigger than 60° is not permitted.

** The means of fastening influences the carrying capacity according to a binding factor.

Further carrying capacit up to 100 t can be delivered on order.

§ § §

§

87

GEWA-DUPLO-endless loops made of polyesterenhance safety and have an excellent useradvantages, e. g.

► Very good price/quality.

► Load distinguished by colour.

► Cooured stripes determine carrying capacity.

► Thickened protective coating.

► PU-impregnation.

► No sidelong seam.

You can use the following advantages:

► More safety while fastened thanks to coloured stripes

determining load.

► Service life.

► Enhanced resistance against cutting off.

► Enhanced transverse and lengthwise stability.

► Better loop slipperiness.

L1


L1 = L1 = L1 = L1 = L1 =0,5 m 0,75 m 1 m 1,5 m 2 m

Type Colour Art. no. Art. no. Art. no. Art. no. Art. no.

0,5 t orange 201000 201001 201002 201003 201004

1 t violet 201013 201014 201015 201016 201017

2 t green 201026 201027 201028 201029 201030

3 t yellow 201039 201040 201041 201042 201043

4 t grey 201052 201053 201054 201055 201056

5 t red 201065 201066 201067 201068 201069

6 t brown 201078 201079 201080 201081 201082

8 t blue 201091 201092 201093

10 t orange 201102 201103 201104

12 t orange 201113 201114 201115

15 t orange 201124 201125 201126

20 t orange 201135 201136 201137

Extra bold numbers ordered are delivered in no time

L1 = L1 = L1 = L1 =2,5 m 3 m 4 m 5 m

Type Colour Art. no. Art. no. Art. no. Art. no.

0,5 t orange 201005 201006 201007 201008

1 t violet 201018 201019 201020 201021

2 t green 201031 201032 201033 201034

3 t yellow 201044 201045 201046 201047

4 t grey 201057 201058 201059 201060

5 t red 201070 201071 201072 201073

6 t brown 201083 201084 201085 201086

8 t blue 201094 201095 201096 201097

10 t orange 201105 201106 201107 201108

12 t orange 201116 201117 201118 201119

15 t orange 201127 201128 201129 201130

20 t orange 201138 201139 201140 201141

Different lengths / interlengths and carrying capacity to 100 t can be delivered on order.

88

PURTEX®

Polyurethan extremelywear resistant, resistantagainst UV-radiation,oil, fat and petrol.

► Easily checked due to

the translucency of the material..

► Continuous quality thanks to

self-production.

► Surface adjustment:

wooden/rubber or even

granulate - that is slip-resistant

guarantee.

GEWA - protection belt for endless loops► Certain, effective and efficient

► It is recommended to use protection belts in case of rough surfaces or sharp edges..

► Either made of firm polyester or rugged PURTEXU®.

WANNER offers you an optimal solution!► Light and simple for service, unbeatable in price.

Endless ARS white ARS-tex, green PURTEX®-Griploops 1 meter 1 meter 1 meter, 2-strand

Carry. cap. Colour 1-strand 2-strand 1-strand 2-strand Width Art. no.

[kg] Art. no. Art. no. Art. no. Art. no. [mm]

500 orange 262000 260608 262200 260710 60 330201

1.000 violet 262001 260608 262201 260711 60 330201

2.000 green 262002 260610 262202 260712 70 330202

3.000 yellow 262003 260611 262203 260713 100 330203

4.000 grey 262004 260611 262204 260713 100 330203

5.000 red 262005 260613 262205 262305 120 330204

6.000 brown 262006 260613 262206 262306 120 330204

8.000 blue 262007 260614 262207 262307 170 330206

10.000 orange 262008 260614 262208 262308 on order

12.000 orange 262009 262109 262209 262309 on order

15.000 orange 262010 262110 262210 262310 on order

20.000 orange 262011 262111 262211 262311 on order

Different length and design is possible to be ordered.

PURTEX®-Grip, for rough surfaces andsharp edges, extremely light and flexible,TWO-SIDED ˘ Cca. 3 mm

ARS, high-strenght ruggedprotection belt made ofpolyesteru, high structurestrenght.

ARS-tex, light and extremelyresistnant against cutting off =patented.

Purtex¤-Schnittschutzfaktor Purtex¤-Schnittschutzfaktor Purtex¤-Schnittschutzfaktor

Order instructions:

1. Please give us length of endless loop and corresponding Art. no. 2. Add Art. no. of protection belt.3. Give us length of protection belt that you have chosen.

E.g.:: 1 x ______m, 2 x _____m, ...... (Special requirements are possible!)

1-strand protection belt 2-strand protection belt


89

Endless PURTEX®- PS2, TWO-SIDED, meter, 2-strand loops Surface

Carry. Colour Proportions Proportions Even Rough** Wooden Rubber- PURKett-cap. cca. mm cca. mm granulate** granulate**kg inside inside Obj. č. Obj. č. Obj. č. Obj. č. Obj. č.

500 35 x 8 50 x 18 330350 330390 330370 330410 330430

1000 60 x 10 80 x 20 330351 330391 330371 330411 330431

2000 60 x 10 80 x 20 330351 330391 330371 330411 330431

3000 100 x 10 120 x 20 330352 330392 330372 330412 330432

4000 100 x 10 120 x 20 330352 330392 330372 330412 330432

5000 145 x 15 165 x 25 330354 330394 330374 330414 330434

6000 145 x 15 165 x 25 330354 330394 330374 330414 330434

8000 145 x 15 165 x 25 330354 330394 330374 330414 330434

10000 170 x 15 190 x 25 330355 330395 330375 330415 330435

12000 170 x 15 190 x 25 330355 330395 330375 330415 330435

15000 200 x 15 225 x 25 330357 330397 330377 330417 330437

20000 230 x 15 260 x 25 330358 330398 330378 330418 330438

Other sizes and modifications can be delivered on order.

(1) PURKett-wire inlay one-sided (two-sided on order).

PURTEX®-protection belts PS2,TWO-SIDED.► thickness cca 5 mm, various surface modifications.

PURTEX®-protection beltsPS2, and PURKett cutting-through resistant. TWO-SIDED.► Standard surface is even(other surfaces available).

PURTEX®-protection belts, ONE-SIDED.► Resistant against abrasion off and sharp edges. ► Cca. 5 mm thickness of polyuretan, ONE-SIDEDTHICKENED.

PURTEX® - protection belts PS1,ONE-SIDED.

*Surfaces even or different can be delivered on order.

**These surfaces are delivered on one side of surface only.

Endless PURTEX®- PS1, ONE-SIDED, meter, 2-strand loops Surface

Carry. Colour Proportions Proportions Even Rough** Wooden Rubber- PURKett-cap. cca. mm cca. mm granulate** granulate**kg inside inside Obj. č. Obj. č. Obj. č. Obj. č. Obj. č.

500 35 x 8 50 x 18 330220 330260 330240 330280 330300

1.000 60 x 10 80 x 20 330221 330261 330241 330281 330301

2.000 60 x 10 80 x 20 330221 330261 330241 330281 330301

3.000 100 x 10 120 x 20 330222 330262 330242 330282 330302

4.000 100 x 10 120 x 20 330222 330262 330242 330282 330302

5.000 145 x 15 165 x 25 330224 330264 330244 330284 330304

6.000 145 x 15 165 x 25 330224 330264 330244 330284 330304

8.000 145 x 15 165 x 25 330224 330264 330244 330284 330304

10.000 170 x 15 190 x 25 330225 330265 330245 330285 330305

12.000 170 x 15 190 x 25 330225 330265 330245 330285 330305

15.000 200 x 15 225 x 25 330227 330267 330247 330287 330307

20.000 230 x 15 260 x 25 330228 330268 330248 330288 330308

PURTEX® - protection blets PS2, TWO-SIDED.

PURKettPurtex¤-SchnittschutzfaktorPurtex¤-Schnittschutzfaktor

even

roug

h

Woo

den

gran

ulat

e

Rub

ber g

ranu

late

PURKettPurtex¤-Schnittschutzfaktor

Purtex¤-Schnittschutzfaktor

even

roug

h

Woo

den

gran

ulat

e

Rub

ber g

ranu

late


PURTEX®-protection belt PS1 PURKett-anticutting off layer (DBGM).► One-sided wire protection.► All round protection and stable fixation“.► Extreme protection against cutting abrasion.

90

GEWA - binding implements made of endless loopsCorresponding DIN-EN 1492-2.

► GEWA-lifting loop (MD) made of high-strength polyester, quality mark GS-tested.

► Double protective coating and additional protective belt ARS.

► Colour distinction.

► High-strength components, quality class 8, unitized system.

► Metal carrying plaquette.

MD - 1-strand suspension

Mark Hook Carry. cap. Colour Length Art. no,type L1*

min. Fitting Hookmm without hook L/mm

MD-1-1,0 OKN 7/8-8 1,0 violet 500 236 98 210000CLS 5/6-8 1,0 violet 500 236 109 210010

MD-1-2,0 OKN 7/8-8 2,0 green 500 236 98 210001CLS 7/8-8 2,0 green 500 236 137 210011

MD-1-3,0 OKN 10-8 3,0 yellow 750 287 122 210002CLS 10-8 3,0 yellow 750 287 168 210012

MD-1-4,0 OKN 13-8 4,0 grey 1.000 348 152 210003CLS 13-8 4,0 grey 1.000 348 208 210013

MD-1-6,0 OKN 16-8 6,0 brown 2.000 408 184 210005CLS 16-8 6,0 brown 2.000 408 254 210015

MD-1-8,0 OKN 16-8 8,0 blue 2.000 408 184 210006CLS 16-8 8,0 blue 2.000 408 254 210016

MD-1-10,0 OKN 18/20-8 10,0 orange 2.500 464 218 210007CLS 18/22-8 10,0 orange 2.500 464 320 210017

90°

ASKR

Lifting loop with 2-strandARS

OKN/CLS

SKR

L1

OKN CLS Suspension head (A)


91

GEWA - binding implements made of endlessloopsCorresponding DIN-EN 1492-2.







Mark Hook Carry. cap. Colour Length Art. no.type ß ß L1*

0-45° 45-60° min. Fitting Hook[to] [to] [mm] without hook [L/mm]

MD-2-1,4 OKN 7/8-8 1,4 1,0 violet 500 236 98 210020CLS 5/6-8 1,4 1,0 violet 500 236 109 210030

MD-2-2,8 OKN 7/8-8 2,8 2,0 green 500 261 98 210021CLS 7/8-8 2,8 2,0 green 500 261 137 210031

MD-2-4,2 OKN 10-8 4,2 3,0 yellow 750 312 122 210022CLS 10-8 4,2 3,0 yellow 750 312 168 210032

MD-2-5,6 OKN 13-8 5,6 4,0 grey 1.000 368 152 210023CLS 13-8 5,6 4,0 grey 1.000 368 208 210033

MD-2-8,4 OKN 16-8 8,4 6,0 brown 2.000 428 184 210025CLS 16-8 8,4 6,0 brown 2.000 428 254 210035

MD-2-11,2 OKN 16-8 11,2 8,0 blue 2.000 428 184 210026CLS 16-8 11,2 8,0 blue 2.000 428 254 210036

MD-2-14,0 OKN 18/20-8 14,0 10,0 orange 2.500 524 218 210027CLS 18/22-8 14,0 10,0 orange 2.500 524 320 210037

ß

L1

A

SKR

SKR

OKN/CLS

Lifting loop with 2-strand ARS

OKN CLS Suspension head (A)


92

















ß

120°

OKN CLS Suspension head (AK with 2 suspension links)

AKSKR

SKR

OKN/CLS

Lifting loop with2-strand ARS

L1


93











ß

L1

AKSKR

SKR

OKN/CLS

Lifting loop with 2-strand ARS

OKN CLS Suspension head (AK with 2 suspension links)








94

GEWAFLEX - rope handling straps► Two-sided eyes with reinforced spring, completely zinc-coated wires.

► Controllable eyes due to movable spiral spring.

► Braided eyes for even weigth distribution - compared to pressed-in eyes.

► Delivered in following modifications: zinc-coated, rubber or polyurethan.

Carry. cap. in kg Proportions Spiral eyesdirectly U-form in cca. mm

(width x Art. no.thickness)

500 1.000 zinc-coated 40 x 6 180000rubber 50 x 10 180100PU-surface 50 x 10 180200

1.000 2.000 zinc-coated 40 x 6 180001rubber 50 x 10 180101PU-surface 50 x 10 180201








Length specification:usable length

L1

Other carrying capacities and modifications available on order

Zinc - coated

Rubber

PURTEX®




Possible delivery withspecial eyes or mounting

Eyes with spiral spring


95

GEWAFLEX - rope handling straps► Two-sided crane eyes made of high-strength steell GT 8, thimble in form of

tubule for mobility..

► Made of high quality zinc-coated ropes.

► Braided eyes for even weigth distribution - compared to pressed-in eyes.

► Delivered in following modifications: zinc-coated, rubber or polyurethan.

Carry. cap. in kg Proportions Crane eyedirectly U-form in cca. mm


500 1.000 zinc-coated 40 x 6 180800rubber 50 x 10 180900PU-surface 50 x 10 181000










L1

Other carrying capacities and modifications available on order.

Delivered also withprotective beltsPURTEX® PS1/PS2,PURKETT!




PURKett

Crane eye

Zinc - coated

Rubber

PURTEX®


96

crane / divided eye

GEWAFLEX - rope handling straps► With crane and divided metal eye, quality class 8, high-strength.

► Thimble in form of tubule for mobility.

► High-quality braided eyes.

► Available in following modifications: zinc-coated, rubber, polyurethan.

Carrying cap. in kg Surface Proportions Crane / divideddirectly U-form reeved* in cca. mm eye


500 1.000 400 zinc-coated 40 x 6 181300rubber 50 x 10 181400PU-surface 50 x 10 181500

1.000 2.000 800 zinc-coated 40 x 6 181301rubber 50 x 10 181401PU-surface 50 x 10 181501

2.000 4.000 1.600 zinc-coated 60 x 8 181302rubber 70 x 13 181402PU-surface 70 x 13 181502







*form of fastening „reeve“ permitted only in case the strap has crane/divided eye.

Other carrying capacities, modifications and eyes available on order only.





L1

C-eye (on order)

Zinc - coted

Rubber

PURTEX®


97

GEWAFLEX - rope endless strapsFor wall devices and traverses endless or endless with lock.

► High-quality and even manufacturing guarantees optimal service life.

► High preciseness and exactness.

Carry. cap. Surface Proportions Endless Modification within kg in cca. mm Art. no. lockdirectly (with x thickness) Art. no.*

1.000 rubber 40 x 10 181900 182200PU-surface 40 x 10 182000 182300








Length specification:at endless with lock =from center to center

L

Connecting lock for GEWAFLEX-rope straps

Carry. cap. Art. no.1.000 kg 1829802.500 kg 1829815.000 kg 182983

10.000 kg 18298415.000 kg 18298520.000 kg 18297025.000 kg 18298630.000 kg 182987

For higher safety we stronglyrecommend protective corners andaluminium corners.

GEWA-wall devices and lifting devices – on order!

*Lock is not a part of order, special order necessary.

GEWAFLEX-rope handling straps with large carrying capacities, other endings or chemicals-resistantmodifications on order.



Connecting lock with quick thread (on order)Connecting lock

Rubber

PURTEX®


98

Technical information:Useful instruction:

Always check the weigth of

the load. Never tax the binding

means.

Never fasten the binding mean

on the prong of crane hook.

Protect the binding mean from

sharp edges.

Never leave the binding mean

under the load.

Bundling forbidden. Usage of PES-handling strap

and endless loop in

temperatures from

-40°C to 100°C.

In case of contact with

chemicals consultation with

supplier is necessary.

Replace damaged binding

means by others.

Pay attention to the type

of fastening and angles.

Check of gravity centre.

+ 100°C

- 40°C

GEWA-handling straps / endless loops made of polyester, DIN-EN 1492-1/2.

Carrying capacities in different ways of fastening

Carrying capacity with one handling or Carrying capacity with two handling orendless loop endless loop

Type Colour Width Directly Reeved U-form Directly Reeved*Anlge ß *Angle ß *Angle ß *Angle ß

in mm > 7-45° > 45-60° > 7-45° > 45-60° > 7-45° > 45-60° > 7-45° > 45-60°

1 t violet 30+50 1 t 0,8 t 2 t 1,4 t 1 t 0,7 t 0,5 t 1,4 t 1 t 1,12 t 0,8 t

2 t green 60+75 2 t 1,6 t 4 t 2,8 t 2 t 1,4 t 1,0 t 2,8 t 2 t 2,24 t 1,6 t

3 t yellow 90+100 3 t 2,4 t 6 t 4,2 t 3 t 2,1 t 1,5 t 4,2 t 3 t 3,36 t 2,4 t

4 t grey 120 4 t 3,2 t 8 t 5,6 t 4 t 2,8 t 2,0 t 5,6 t 4 t 4,48 t 3,2 t

5 t red 150+200 5 t 4,0 t 10 t 7,0 t 5 t 3,5 t 2,5 t 7,0 t 5 t 5,60 t 4,0 t

6 t brown 180 6 t 4,8 t 12 t 8,4 t 6 t 4,2 t 3,0 t 8,4 t 6 t 6,72 t 4,8 t

8 t blue 240+250 8 t 6,4 t 16 t 11,2 t 8 t 5,6 t 4,0 t 11,2 t 8 t 8,96 t 6,4 t

10 t orange 300 10 t 8,0 t 20 t 14,0 t 10 t 7,0 t 5,0 t 14,0 t 10 t 11,20 t 8,0 t






§§

§§ §

§

§

*Angle ß reduces permitted carrying capacity. Angle bigger than 60° is not permited.

GEWA-handling loop

DUPLO-endless strap

DUPLIX-endless strap


99

GEWA - handling strapFrom polyester, DIN-EN 1492-1.

► High carrying capacity.

► Low weigth.

► Resistant against rot.

► Resistant against UV-radiation.

► Wide carrying area.

► Regardfull strap handling.

► Accident proof.

► Quality quaranteed.

Type/ Width Carry.cap. Colour Handling strap layer [mm] [to] Standard- 90° rewound

eyes eyesArt. no. Art. no.

30/1 30 0,5 white – –

50/1 50 0,5 white 220004 220054

60/1 60 1,0 white 220005 220055

75/1 75 1,0 violet 220006 220056

90/1 90 1,5 white 220007 220057

100/1 100 1,5 white 220008 220058

120/1 120 2,0 green 220009 220059

150/1 150 2,5 white 220010 220060

180/1 180 3,0 yellow 220011 220061

200/1 200 2,5 white 220012 220062

240/1 240 4,0 grey 220013 220063

300/1 300 5,0 red 220015 220064

Type/ Width Carry.cap. Colour Handling straplayer [mm] [to] Simple eye Metal eyes

the whole width 2 crane eyes Crane/split eyeArt. no. Art. no. Art. no.

30/1 30 0,5 white 220091 220131 220171

50/1 50 0,5 white 220094 220134 220174

60/1 60 1,0 white 220095 220135 220175

75/1 75 1,0 violet 220096 220136 220176

90/1 90 1,5 white 220097 220137 220177

100/1 100 1,5 white 220098 220138 220178

120/1 120 2,0 green 220099 220139 220179

150/1 150 2,5 white 220100 220140 220180

180/1 180 3,0 yellow 220101 220141 220181

200/1 200 2,5 white 220102 220142 220182

240/1 240 4,0 grey 220103 220143 220183

300/1 300 5,0 red 220105 220145 220185

type, one-layer:

Different design can be delivered on order.

Length specificationusable length

L1

Standard eye 90° rewound eyes


100

Type/ Width Carry.cap. Colour Handling straplayer [mm] [to] Simple eyes Metal eyes

the whole width 2 crane eyes Crane / split eyeArt. no. Art. no. Art. no.

30/2 30 1,0 violet 220341 220381 220431

50/2 50 1,0 violet 220344 220384 220434

60/2 60 2,0 green 220345 220385 220435

75/2 75 2,0 green 220346 220386 220436

90/2 90 3,0 yellow 220347 220387 220437

100/2 100 3,0 yellow 220348 220388 220438

120/2 120 4,0 grey 220349 220389 220439

150/2 150 5,0 red 220350 220390 220440

180/2 180 6,0 brown 220351 220391 220441

200/2 200 5,0 red 220352 220392 220442

240/2 240 8,0 blue 220353 220393 220443

300/2 300 10,0 orange 220355 220395 220445

Different design can be delivered on order.

Type/ Width Carry.cap. Colour Handling straplayer [mm] [to] Standard- 90° rewound

eyes eyesArt. no. Art. no.

30/2 30 1,0 violet – –

50/2 50 1,0 violet 220254 220294

60/2 60 2,0 green 220255 220295

75/2 75 2,0 green 220256 220296

90/2 90 3,0 yellow 220257 220297

100/2 100 3,0 yellow 220258 220298

120/2 120 4,0 grey 220259 220299

150/2 150 5,0 red 220260 220300

180/2 180 6,0 brown 220261 220301

200/2 200 5,0 red 220262 220302

240/2 240 8,0 blue 220263 220303

300/2 300 10,0 orange 220265 220305

type, two-layers: Standard eye 90° rewound eye


101

Technical details:eyes and metal crane eyes and split eyesProportions of eyes: standard handling strap.

Crane eye zinc-coatedQuality class 8

Width of strap Width of eye Lenth of eye “ c “[mm] [cca. mm] inner length in mm

30 35 200

50 25 250

60 25 250

75 35 300

90 40 350

100 45 350

120 50 380

150 70 450

180 90 600

200 100 650

240 130 700

300 160 900

Width of strap Carrying cap. Proportions in mm Weigth Art. no.[mm] [kg] d b t [cca. kg]

30-50 2.000 13 62 80 0,31 230000

60+75 2.000 16 75 130 0,66 230001

90+100 3.000 18 105 140 0,99 230003

120 4.000 22 130 130 1,60 230004

150 5.000 26 170 170 2,80 230005

180 6.000 26 190 220 3,00 230006

200+240 8.000 26 250 235 3,10 230007

300 10.000 36 300 280 9,00 230002

Split metal eyeQuality class 8

Width of band Carry.cap. Proportions in mm Weigth Art. no.[mm] [kg] d b b1 t t1 [cca. kg]

30 1.000 13 30 95 145 45 0,60 230010

50+60 2.000 16 60 115 165 55 1,00 230011

75+90 3.000 18 90 150 190 65 1,59 230013

100+120 4.000 22 120 195 240 85 2,90 230014

150 5.000 26 150 240 300 100 5,00 230015

180 6.000 26 180 270 315 110 5,20 230016

200+240 8.000 26 240 330 365 110 5,40 230017

300 10.000 36 300 430 430 144 14,50 230012


b1

t 1


102

GEWA - endless strapFrom polyester, DIN-EN 1492-1.

► High carrying capacity.

► Light weigth.

► Resistant against rot.

► Resistant against UV-radiation.

► Wide carrying area.

► Take consideration handling with the sling.

► There is no danger of accident while working with the handling sling.

► Certified quality guarantee.

Type/ Width Carrying cap. Colour Endlesslayer [mm] [to] design

Art. no.

E 30/1 30 1,0 violet 220211

E 50/1 50 1,0 violet 220214

E 60/1 60 2,0 green 220215

E 75/1 75 2,0 green 220216

E 90/1 90 3,0 yellow 220217

E 100/1 100 3,0 yellow 220218

E 120/1 120 4,0 grey 220219

E 150/1 150 5,0 red 220220

E 180/1 180 6,0 brown 220221

E 200/1 200 5,0 red 220222

E 240/1 240 8,0 blue 220223

E 300/1 300 10,0 orange 220225

type, one-layer:

Type/ Width Carrying cap. Colour Endlesslayer [mm] [to] design

Art. no.

E 30/2 30 2,0 green 220471

E 50/2 50 2,0 green 220474

E 60/2 60 4,0 grey 220475

E 75/2 75 4,0 grey 220476

E 90/2 90 6,0 brown 220477

E 100/2 100 6,0 brown 220478

E 120/2 120 8,0 blue 220479

E 150/2 150 10,0 orange 220480

E 180/2 180 12,0 orange 220481

E 200/2 200 10,0 orange 220482

E 240/2 240 10,0 orange 220483

E 300/2 300 20,0 orange 220484

type, two-layer:


Length specification:When ordering, please

always determine Art. no.and usable length L1!

L1


103

GEWA - protection bands for handling straps► Safe and effective.

► Safe protection for handling straps used on rough or sharp edges.

► They can be manufactured either from cut-through resistant polyester or robuster PURTEX®u.

WANNER always offer you optimal solution!► Light and practical while handling, easy for use, unbeatable price.

Width ARS (Pes), ARS-tex, PURTEX®-of strap white green Grip-bandfor handling per meter per meter per meterstrapy [mm] Art. no. Art. no. Art. no.

30 260608 260710 330201

50 260608 260711 330202

60 260610 260712 330202

75 260611 260713 330203

90 260613 260713 330204

100 260614 260714 330204

120 260614 260715 330205

150 260615 260716 330206

180 260740 260717 on order

200 260741 260718 on order

240 260742 260719 on order

250 260743 260720 on order

300 260744 260721 on order

Other sizes and designs can be delivered on order.

*Smooth surface, other surfaces can be delivered on order.**These are only one-sided surfaces.

(1) PURKett- one-sided layer. Two-sided layer can be delivered on order.

PURTEX®Polyuretan extremelyresistant against abrasionand cut-through. Resistantagainst UV-radiation, oils, fatand petrol.

► Easy to check due to transparent

material.

► Method of manufacture ensures long

service life and high quality.

► Wooden /Rubber granulate and rough

surface prevents from sliding.

PURTEX®-Grip-band,for rought surfaces and sharpedges, extremely light andflexible, TWO-SIDED.cca. 3 mm thick.

Protection band againstabrasion (ARS), highly efficientand thick woven polyester hose,high structural firmness.

ARS-tex, light and extremelyresistant against rupture = speciallayered fabric.

Purtex¤-Schnittschutzfaktor Purtex¤-Schnittschutzfaktor Purtex¤-Schnittschutzfaktor

Order recomendation:

1. Specify the Art. no. of the chosen handling strap. 2. Add the Art. no. of the chosen protection bands.3. State the length of protection band.

E.g.: 1 x ______m, 2 x _____m, ......

(Special offer possible!)


104

PURTEX®-protection band PS1, One-sided with protective lamination , per metersurface

Smooth Roughened Wooden Rubber PURKett-granulate granulate layer*

Art. no. Art. no. Art. no. Art. no. Art. no.

330220 330260 330240 330280 330300

330221 330261 330241 330281 330301

330226 330266 330246 330286 330306

330222 330262 330242 330282 330302

330222 330262 330242 330282 330302

330224 330264 330244 330284 330304

330224 330264 330244 330284 330304

330225 330265 330245 330285 330305

330227 330267 330247 330287 330307

330228 330268 330248 330288 330308

330229 330269 330249 330289 330309

330229 330269 330249 330289 330309

330230 330270 330250 330290 330310

PURTEX®-protection band PS1, ONE-SIDED► Resistant against tearing on sharp edges. ► cca. 5 mm PU, ONE-SIDED with protective lamination.

PURTEX®-Protection band PS1 with PURKett-Protective layer against rupture (DBGM).

► One-sided protection made of metal fabric.► All-round protection. ► Extremely strong protection against abrasion.

Width of Size Sizestrap for in mm in mmhandl. straps inner outer[mm]

30 35 x 8 50 x 18

50 60 x 10 80 x 20

60 70 x 10 90 x 20

75 100 x 10 120 x 20

90 100 x 10 120 x 20

100 145 x 15 165 x 25

120 145 x 15 165 x 25

150 170 x 15 190 x 25

180 200 x 15 225 x 25

200 230 x 15 260 x 25

240 270 x 20 300 x 30

250 270 x 20 300 x 30

300 330 x 20 370 x 30

Width of Size Sizestrap for in mm in mmhandl. straps inner outer[mm]

30 35 x 8 50 x 18

50 60 x 10 80 x 20

60 70 x 10 90 x 20

75 100 x 10 120 x 20

90 100 x 10 120 x 20

100 145 x 15 165 x 25

120 145 x 15 165 x 25

150 170 x 15 190 x 25

180 200 x 15 225 x 25

200 230 x 15 260 x 25

240 270 x 20 300 x 30

250 270 x 20 300 x 30

300 330 x 20 370 x 30

PURTEX®-Protection band PS2, TWO-SIDED, per Meter, 2-strand Surface

Smooth Roughened Wooden Rubber PURKett-granulate granulate layer*

Art. no. Art. no. Art. no. Art. no. Art. no.

330350 330390 330370 330410 330430

330351 330391 330371 330411 330431

330356 330396 330376 330416 330436

330352 330392 330372 330412 330432

330352 330392 330372 330412 330432

330354 330394 330374 330414 330434

330354 330394 330374 330414 330434

330355 330395 330375 330415 330435

330357 330397 330377 330417 330437

330358 330398 330378 330418 330438

330359 330399 330379 330419 330439

330359 330399 330379 330419 330439

330360 330400 330380 330420 330440

PURTEX® - protection band PS1, ONE-SIDED

PURTEX®-Protection band PS2, two-sided

► cca. 5 mm, various surfaces.

PURTEX®-Protection band PS2, with protection layer against abrasion.PURKett, TWO-SIDED(1).► Standard designs with smooth surface. (other sizes

can be delivered onr order).

PURTEX® - protection band PS2, TWO-SIDED

PURKettPurtex¤-SchnittschutzfaktorS

moo

th

Rou

ghen

ed

Woo

den

gran

ulat

e

Rub

ben

gran

ulat

e

PURKettPurtex¤-SchnittschutzfaktorPurtex¤-Schnittschutzfaktor


Sm

ooth

Rou

ghen

ed

Woo

den

gran

ulat

e

Gum

ový

gran

ulát


105

GEWA - PURTEX® - protective coat formanipulating strap► Safe and efficient.

► Extremely resistant against abrasion.

► Transparent cover (safety / controllable).

► Safe protection for handling strap and material when working on rough surface or

sharp edges.

► Made of polyester resistant against abrasion or made of even firmer PURTEX®.

► Low weigth, easy manipulation/unbeatable price.

► Resistant against ozone and UV radiation.

► High structural firmness and flexibility.

► Wooden and rubber granulate, roughened antiskid areas.

WANNER offers you always optimal solution!

GEWAPRO-Protective spray coatingadditional protection of strap surface. Prolongsthe hardiness due to extreme resistant againstabrasion. The surface is protected from dirt.

Width of strap GEWAPRO-Protective spray coating

for handling one-sided two-sided

strap per meter per meter

[mm] Art. no. Art. no.

30 330751 330701

50 330754 330704

60 330755 330705

75 330757 330707

90 330759 330709

100 330760 330710

120 330761 330711

150 330762 330712

180 330763 330713

200 330764 330714

240 330765 330715

250 330766 330716

300 330767 330717

GEWAPRO - Protective spray coating► Optimal protection against abrasion.

► Protects surface areas against dirt penetration.

Order recomendation:

1. Specify the Art. no. of the chosen handling strap.

2. Add the Art. no. of the chosen surface.3. Choose the length of covering .

e.g.: whole length of strap, in the middle 1 x ______m, 2 x _____m, ...... (Special wishes possible!)

4. Specify kind of goods and choosen kind ofprotection.

e.g.: 2 pieces, Art. no. 331583


PURTEX®

Polyuretan extremely resistant against abrasion andtearing, UV radiation, oil, fat and petrol.

► Transparent design - easy control.

► Long-term quality due to special design.


106

PURTEX®-Protectionlayer F1 with PURKett-and imbedded layeragainst rupture.(DBGM). One-sided protection ofmetal fabric. ► ”It protects and stays

in place.” ► Extremely safe

against abrasion dueto metal inset.

For handl. PURTEX®-protection against PURTEX®-protection layer F1

strap pollution V1*, 3 mm, ONE-SIDED , with protection thickness,

Type/ ONE-SIDED, per meter per meter

Width Size Art. No..* Size Surface Surface Surface Surface Surfaceof strap [cca. mm] [cca. mm] smooth roughened Wooden granulate Rubber PURKett-[mm] Art.. no. Art.. no. Art.. no. granulate with inset metal * layer

Art.. no. Art. no.

30 30 x 10 330801 40 x 16 331201 331243 331283 331300 331320

50 50 x 9 330804 65 x 15 331204 331244 331284 331301 331321

60 60 x 9 330805 72 x 18 331205 331245 331285 331302 331322

75 75 x 10 330807 90 x 18 331207 331247 331287 331303 331323

90 90 x 10 330809 105 x 19 331209 331249 331289 331304 331324

100 100 x 10 330810 114 x 19 331210 331250 331290 331305 331325

120 120 x 12 330811 133 x 18 331211 331251 331291 331306 331326

150 150 x 12 330812 165 x 19 331212 331252 331292 331307 331327

180 180 x 13 330820 195 x 19 331213 331253 331293 331308 331328

200 200 x 13 330821 220 x 20 331214 331254 331294 331309 331329

240 240 x 14 330822 260 x 20 331215 331255 331295 331310 331330

250 250 x 15 330823 280 x 22 331216 331256 331296 331311 331331

300 300 x 16 330824 330 x 25 331217 331257 331297 331312 331332

PURTEX® - Protection layer against pollution V1, ONE-SIDEDPURTEX® - Protection spray coating F1, ONE-SIDED

PURTEX®-Protection layer againstpollution V1*, One-sided. Extremely light and flexible, without edge protection.

*Smooth surface. Other surfaces can be delivered on order. It is possible to change sizes at PURKett protection.

Purtex¤-Schnittschutzfaktor Purtex¤-Schnittschutzfaktor

Sm

ooth

Rou

ghen

ed

Woo

den

gran

ulat

e

Rub

ber g

ranu

late

PURTEX®-protection layer F1. Resistant against rupture by sharp edge. ► Approx. 5 mm PU, One-sided with protective

lamination, various surfaces.

Roughened surface, wooden granulate and rubbergranulate are particularly skid resistant.!


PU

RK

ett

F1

F1V1


107

Width of handling PURTEX®-protection layer F2, TWO-SIDED,

strap per meter

For Size Surface Surface Surface Surface Surface Surfacewidth in mm Smooth Roughened** Wooden granulate** Rubber PURKett- PURKett-[mm] Art. no. Art. no. Art. no. granulate** layer* layer*

Art. no. one-sided two-sided

30 40 x 16 331401 331442 331482 331502 331522 331542

50 65 x 15 331404 331444 331484 331504 331524 331544

60 72 x 18 331405 331445 331485 331505 331525 331545

75 90 x 18 331407 331447 331487 331507 331527 331547

90 105 x 19 331409 331449 331489 331509 331529 331549

100 114 x 19 331410 331450 331490 331510 331530 331550

120 133 x 18 331411 331451 331491 331511 331531 331551

150 165 x 19 331412 331452 331492 331512 331532 331552

180 195 x 19 331413 331453 331493 331513 331533 331553

200 220 x 20 331414 331454 331494 331514 331534 331554

240 260 x 20 331415 331455 331495 331515 331535 331555

250 280 x 22 331416 331456 331496 331516 331536 331556

300 330 x 25 331417 331457 331497 331517 331537 331557

PURTEX®-protection layer F2 TWO-SIDED.

► Approx. 5 mm, protection of the whole surface of the handling strap. Enduring and extremely resistant against rupture.

PURTEX® - protective coat F2, TWO-SIDED

** Only one-sided

* Smooth surface. Other surfaces can be delivered on order.

PURTEX®-protection layer F2PURKett- with steelreinforcement (DBGM). One- or two sided metal layer withunbeaten working security andhigh flexibility. ► Optimal edge protection!


Sm

ooth

Rou

ghen

ed

woo

den

gran

ulat

e

Rub

ber g

ranu

late


PU

RK

ett

F2

F2


108

Polypropylene lashing ropes /AAccording to the norm DIN-EN 699, 3-strand, DIN 83302/DIN-EN 1492-4*two-sided.

Rope-ø Carrying capacity

[mm] [t] [t] [t] [t] [t] Art. no.

16 0,48 0,38 0,96 0,65 0,48 319040

20 0,75 0,6 1,5 1,0 0,75 319042

24 1,1 0,88 2,2 1,5 1,1 319044

28 1,4 1,1 2,8 2,0 1,4 319046

32 1,7 1,4 3,4 2,4 1,7 319048

36 2,2 1,8 4,4 3,1 2,2 319049

40 2,6 2,1 5,2 3,6 2,6 319050

48 3,7 3,0 7,4 5,2 3,7 319051

0-45¡ 45-60¡

Order recommendation:Always specify Art. no. and the choosen length L.


[mm] [t] [t] [t] [t] [t] Art. no.

16 0,96 0,76 1,9 1,3 0,96 319060

20 1,5 1,2 3,0 2,0 1,5 319062

24 2,2 1,8 4,4 3,0 2,2 319064

28 2,8 2,2 5,6 4,0 2,8 319066

32 3,4 2,8 6,8 4,8 3,4 319068

36 4,4 3,6 8,8 6,2 4,4 319069

40 5,2 4,2 10,4 7,2 5,2 319070

48 7,4 6,0 14,8 10,4 7,4 319071

0-45¡ 45-60¡

L

Polypropylene lashing ropes/Aaccording to the norm DIN-EN 699, 3-strand, DIN83302/DIN-EN 1492-4*endless with short splice.

* New EU-Norm is being prepared. Other design and not stated sizes can be deliveredon order.

* New EU-Norm is being prepared. Other design and not stated sizes can bedelivered on order.


109

Polyamide lashing ropes/Aaccording to the norm DIN-EN 696, 3-strand, DIN 83302/DIN-EN 1492-4*endless with short splice.


[mm] [t] [t] [t] [t] [t] Art. no.

16 1,35 1,1 2,7 1,9 1,35 319020

20 2,2 1,75 4,4 3,0 2,2 319022

24 3,0 2,4 6,0 4,2 3,0 319024

28 4,2 3,4 8,4 5,8 4,2 319026

32 5,2 4,2 10,4 7,2 5,2 319028

36 6,4 5,2 12,8 9,0 6,4 319029

40 7,6 6,0 15,2 10,6 7,6 319030

48 10,8 8,6 21,6 15,2 10,8 319031

0-45¡ 45-60¡


[mm] [t] [t] [t] [t] [t] Art. no.

16 0,68 0,54 1,35 0,9 0,68 319000

20 1,1 0,88 2,2 1,5 1,1 319002

24 1,5 1,2 3,0 2,1 1,5 319004

28 2,1 1,7 4,2 2,9 2,1 319006

32 2,6 2,1 5,2 3,6 2,6 319008

36 3,2 2,6 6,4 4,5 3,2 319009

40 3,8 3,0 7,6 5,3 3,8 319010

48 5,4 4,3 10,8 7,6 5,4 319012

0-45¡ 45-60¡

* New EU-Norm is being prepared. Other designs and not stated sizes can bedelivered on order.

Polyamide lashing ropes/AAccording to the norm DIN-EN 696, 3-strand, DIN 83302/DIN-EN 1492-4*two-sided eye.


L



110

Hempen lashing ropes/AAccording to the norm DIN-EN 1261, 3-strand, DIN 83302 /DIN-EN 1492-4*, endless with short splice.


[mm] [t] [t] [t] [t] [t] Art. no.

16 0,5 0,4 1,0 0,7 0,5 319100

20 0,7 0,56 1,4 1,0 0,7 319102

24 1,0 0,8 2,0 1,4 1,0 319104

28 1,4 1,1 2,8 2,0 1,4 319106

32 1,8 1,45 3,6 2,6 1,8 319108

36 2,4 1,9 4,8 3,4 2,4 319109

40 2,8 2,2 5,6 4,0 2,8 319110

48 4,0 3,2 8,0 5,6 4,0 319111

0-45¡ 45-60¡

Hempen lashing ropesaccording to the norm DIN-EN 1261, 3-strand, DIN83302 / DIN-EN 1492-4*, two-sided eye.


[mm] [t] [t] [t] [t] [t] Art. no.

16 0,25 0,2 0,5 0,35 0,25 319080

20 0,35 0,28 0,7 0,49 0,35 319082

24 0,5 0,4 1,0 0,7 0,5 319084

28 0,7 0,56 1,4 1,0 0,7 319086

32 0,9 0,72 1,8 1,2 0,9 319088

36 1,2 0,96 2,4 1,7 1,2 319089

40 1,4 1,1 2,8 2,0 1,4 319090

48 2,0 1,6 4,0 2,8 2,0 319091

0-45¡ 45-60¡

Polyester lashing ropes/AAccording to the norm DIN-EN 697, 3-strand, DIN83302 / DIN-EN 1492-4*, two-sided eye.


[mm] [t] [t] [t] [t] [t] Art. no.

16 0,52 0,42 1,05 0,7 0,52 319120

20 0,8 0,64 1,6 1,1 0,8 319122

24 1,2 0,96 2,4 1,7 1,2 319124

28 1,5 1,2 3,0 2,1 1,5 319126

32 2,0 1,6 4,0 2,8 2,0 319128

36 2,5 2,0 5,0 3,5 2,5 319129

40 3,0 2,2 6,0 4,2 3,0 319130

48 4,3 3,4 8,6 6,0 4,3 319131

0-45¡ 45-60¡

* New EU-Norm is being prepared. Other design and not stated sizes can be deliveredon order.

L

L



111

GEWAmax - polyamide lashing ropes

GEWAmax - polyester lashing ropes5-strand, according to the norm DIN 83302/DIN - EN 1492-4*endless

►Particularly firm and resistant against rupture.

►For using GEWA-max-binding ropes in “hot

running” (e.g. welding,... ) they can be

impregnated by fire-resistant stuff.

►Diameters 16 – 48 mm are delivered, other

sizes and designs can be delivered on order.

► Please follow the type list and carrying

capacity table.

Polyester lashing ropes /AAccording to the norm DIN-EN 697, 3-strand,DIN 83302/DIN- EN 1492-4*endless with short splice.


[mm] [t] [t] [t] [t] [t] Art. no.

16 1,05 0,84 2,1 1,45 1,05 319140

20 1,6 1,3 3,2 2,2 1,6 319142

24 2,4 1,9 4,8 3,4 2,4 319144

28 3,0 2,4 6,0 4,2 3,0 319146

32 4,0 3,2 8,0 5,6 4,0 319147

36 5,0 4,0 10,0 7,0 5,0 319149

40 6,0 4,8 12,0 8,4 6,0 319150

48 8,6 6,8 17,2 12,0 8,6 319151

0-45¡ 45-60¡



112

To clamp crossways– but safelyFor fast, troublefree and safe fastening of load it is necessary to define the correct material- our chart will help you.

α β

Crossway clamping – optimal and identical withWANNER-chart of clampingmethods:According to adjacent chart and angles andangle b. It is necessary to know calculationswithout angles, choice of suitable clampingmeans in relation to the load..

Pay attention also to frictional values implicitly(see the chart). They may reduce dimensionsof clamping means very much.

Frictional value µ with

a - b = cca. 20° do 60° GEWAgum

Weigth µ 0,15 µ 0,30 µ 0,45 µ 0,60 Weigth

of load LC daN LC daN LC daN LC daN of load

do 0,25 tun 250 125 100 100 do 0,25 tun

0,5 tun 500 250 250 250 0,5 tun

1 tun 1000 500 500 250 1 tun

1,5 tun 1500 1000 500 250 1,5 tun

2 tun 2000 1000 500 500 2 tun

2,5 tun 2000 1500 800 500 2,5 tun

3 tun 2500 1500 800 500 3 tun

3,5 tun 3000 1500 1000 500 3,5 tun

4 tun 4000 2000 1000 800 4 tun

4,5 tun 4000 2500 1500 800 4,5 tun

5 tun 5000 2500 1500 800 5 tun

6 tun 5000 4000 2000 1000 6 tun

7 tun 6300 4000 2000 1000 7 tun

8 tun 10000 4000 2500 1500 8 tun

9 tun 10000 5000 2500 1500 9 tun

10 tun 10000 5000 3000 1500 10 tun

11 tun 10000 6300 3000 1500 11 tun

12 tun 10000 6300 4000 2000 12 tun

14 tun 13000 8000 4000 2000 14 tun

15 tun 13000 8000 4000 2000 15 tun

18 tun 16000 10000 5000 2500 18 tun

20 tun 20000 10000 6300 4000 20 tun

22 tun 20000 13000 6300 4000 22 tun

24 tun 13000 10000 4000 24 tun

26 tun 13000 10000 4000 26 tun

28 tun 16000 10000 4000 28 tun

30 tun 16000 10000 4000 30 tun

35 tun 20000 10000 6300 35 tun

40 tun 20000 13000 6300 40 tun

45 tun 13000 6300 45 tun

50 tun 16000 10000 50 tun

Tractive force - chart for crossways clamping of loadAngles a and b always from cca. 20° to 60° need to be considered

You need at least:

4 clamping instruments each with tractive force (LC… daN) in straight traction from …(if you directly specify angle α and angle ß, value of LC can be lower!)

** Friction values from µ 0,60 can be reached if the surface is clear,dry, nongreasy...

If uncertain use the lowest values. GEWAgum-antiskid pads have friction values > 0,6 and areavailbale on order.

Example

Weigth of your: 10 to

Frictional value: µ 0,30

You need 4 clamping eachwith tractive force LC 5000daN straight

with GEWAgum-antiskid pad:frictional value: µ 0,6

4 clamping with tractiveforce LC 1500 daN

Combination- Friction µ by materials relation

materials dry dusty/dirty wet greasy

metal/wood 0,20-0,50 0,20-0,30 0,20-0,25 0,02-0,10

metal/metal 0,10-0,25 0,10-0,20 0,10-0,20 0,01-0,10

wood/wood 0,20-0,50 0,15-0,20 0,20-0,25 0,05-0,15

wood/concrete 0,30-0,60 0,30-0,40 0,30-0,50 0,10-0,20

GEWAgum**>=0,6 0,50-0,60 0,30-0,40 0,50-0,60 unrecommended


113

Technical data:

► firm steel band, which is 6 times lighter, stainless and with good surface.

► elastic tightening firmness from 4-8%

► resistan against water, UV radiation and temperature differnces from -40 do 100°C

► resistant against many acids and chemicals

GEWA - banding system,type CFast, multi-purpose, safe and affordable banding system. Designed especially for stackingand piling of cardboards, pallets, metal and wooden elements etc. Often used for indoortransport.

GEWA - bands and lockssling - polyester, clamping lock - steel

Type C-WG, Centre core 76 mm Lock-

Width of band Firmness Length *

[mm] [daN] [meter] Art. no. Art. no.

9 275 1500 242030 242100

13 375 1100 242031 242101

13 550 850 242041 242101

16 450 850 242032 242102

16 600 600 242043 242102

19 550 600 242033 242103

19 725 500 242034 242103

25 950 500 242035 242104

30 1170 150 242036 242105

* VE: 1000 pcs, 19 mm 500 pcs, 25 mm 250 pcs, 30 mm 125 pcs

GEWA - stretching devices type C/CSfor band C-WG

Width up to 20 mm Art. no. 242115Width up to 25 mm Art. no. 242116Width up to 40 mm Art. no. 242117

GEWA - Coil reeltype CS-AC 200 T for coil with centre core 76mm, portable Art. no. 242110

Other modifications and types onorder.


114

GEWA - removal slingsMlultipurpose and very comfortable

GEWA - removal slings type WTG-P

► Made of resistant polyester with extra wide stiffener on shoulder for even more comfortable removal

► Adjustable buckles enable fast adaptation on body

► Length 4,0 m

Art. no. 370102

GEWA - removal slings type WTG-H1

► Made of 1a-webbing sling► 80 mm, endless design► With hook of flat steel► Adjustable buckles► Length 3,0 m

Art. no. 370100

GEWA - removal slings type WTG-H2

► Made of 1a-webbing sling► 80 mm, endless design► With hook of flat steel► Adjustable thanks to spinous buckle► Length 3,0 m

Art. no. 370101

GEWA - removal slingstype WTG-T

► Made of polyester► 50 mm► Eyes on both ends► Central leather stiffener designed for carrying

of glass plates

► 1,0 m length Art. no. 370104► 1,5 m length Art. no. 370105► 1,7 m length Art. no. 370106

Type WTG-P

Type WTG-H1

Type WTG-H2 Type WTG-T

We deal with production ofsuitcase slings.


115

Type 250 Z 25 mm750 S 25 mm900 Z 35 mm

1800 S 50 mmLC directly 125 daN

LC wrapping 250 daN

Variations of hooks for clamping strapsClamping strap, type 250 Z and 750 S( Art. no. = complete clamping strap (ratchet part + counterpart) in standard lengths)

Tooth hook EyetoothType 250 Z, white Art. no. 240004 Type 250 Z, white Art. no. 240016Type 750 S, grey Art. no. 240104 Type 750 S, grey Art .no. 240116

Clamping straps and theircomponents available in several

standard lengths !

L

LE FE

L

GEWA - clamping strapswith lock, DIN-EN 12195

With aluminium lock, PES-sling, standard whitecolour, other colours alsoavailable.

1-part clamping strap, type 250 Z

without hook,standard length: 4,0 m Art. no. 240000

2-part clamping straps, type 250 ZDesign and Art. no. mentioned belowStandard length: 2,0 m (FE 0,2 m + LE 1,8 m)

Snap hook with eyeType 250 Z, white Art. no. 240013Type 750 S, grey Art. no. 240113

Triangle + hookType 250 Z, white Art. no. 240020Type 750 S, grey Art. no. 240123

Lock, pressure-cast, type 250 Z

Art. no. mentioned at hooks = Art.no. of complete clamping strap, it isnecessary to specify the length only.


116

250 Z 25 mm

Type 750 S 25 mm900 Z 35 mm

1800 S 50 mm

LC directly 375 daNLC wrapping 750 daN

S-hook, with PVC-surfaceType 250 Z, white Art. no. 240023Type 750 S, grey (not available)

Eye, whole width of strapType 250 Z, white Art. no. 240001Type 750 S, grey Art. no. 240101

Plated or powder-coatedlocks (on order)

Instructions for orderingcomplete clampingstraps:

choose ending hook/eye andappropriate Art. no. Specify length ofratchet part and counterpart.

All clapming straps depicted in thecatalogue can be ordered also withprinting e.g. of your company or inother colour.

L

FELE

L

1-part clamping strap, type 750 S

without hook, standard length: 4,0 m Art. no. 240100

2-part clamping strap, type 750 SDesign and Art. no. mentioned belowStandard length: 2,0 m (FE 0,2 m + LE 1,8 m)

Clamping lock, galvanic steel, type 750 S

Pallet hookType 250 Z, white Art. no. 240007Type 750 S, grey Art. no. 240107

Protection bands and protection edges -you can find them in our assortment.


117


Variations of hooks for clamping straps type 500 and 1000( Art. no. = complete clamping strap (ratchet part + counterpart) in standard lengths)

Type 500 25 mm STF 25 daN

1000 25 mm STF 50 daN2000 35 mm STF 100 daN4000 50 mm STF 200-550 daN

Toothed hook EyetoothType 500, yellow Art. no. 240454 Type 500, yellow Art. no. 240457Type 1000, blue Art. no. 240654 Type 1000, blue Art. no. 240657

Ratchet type 500, zinc-coated, STF 25 daN

Hooks and ratchets also available instainless design. on order!

Triangle with hookType 500, yellow Art. no. 240460Type 1000, blue Art. no. 240671

Eye, whole width of slingType 500, yellow Art. no. 240451Type 1000, blue Art. no. 240651

GEWA - clamping straptype 500, DIN-EN 12195,zinc-coated or powder-coated ratchets (onorder).Sling in standard yellowcolour.

Snap hook Pallet hookType 500, yellow Art. no. 240560 Type 500, yellow Art. no. 240563Type 1000, blue Art. no. 240660 Type 1000, blue (not available)

L

RTLE

L

1-part clamping strapswithout hook, standard length: 4,0 m, yellow Art. no. 240450

2-part clamping straps Standard length: 4,0 m (RT 0,3 + LE 3,7 m), yellow


118

Ratchet type 1000, zinc-coated,STF 50 daN

500 25 mm

Type 1000 25 mm2000 35 mm4000 50 mm5000 50 mm

STF 25 daN

STF 50 daN

STF 100 daNSTF 200-550 daNSTF 250-700 daN

LC directly 500 daN

LC wrapping 1000 daN

Instructions for orders:

choose ending component and appropriate Art. no.

Specify length of ratchet part and counterpart (RT and LE).All clapming straps depicted in the catalogue can be orderedalso with printing e.g. of your company or in other colour.

S-hook, with PVC-surfaceType 500, yellow Art. no. 240463Type 1000, blue (not available)

L

RTLE

L

1-part clamping strapwithout hook, standard length: 4,0 m, blue Art. no. 240650

2-part clamping strapStandard length: 4,0 m (RT 0,3 + LE 3,7 m), blue

GEWA - clamping strapDIN-EN 12195.Ratchet with widerhandle in thicker design. Zinc-coated or powder-coated ratchets.

Protection bands or edges available per orders.


119

1000 25 mm STF 50 daN

Type 2000 35 mm STF 100 daN

4000 50 mm STF 200-550 daN5000 50 mm STF 250-700 daN

10000 75 mm STF 500 daN

Variations of hooks for clamping straps type 2000( Art. no. = complete clamping strap (ratchet part + counterpart) in standard lengths)

Eyetooth Span hookArt. no. 240810 Art. no. 240804


Hooks and ratchets available also instainless design on order!

Toothed wide hook hákArt. no. 240807

GEWA - clamping straptype 2000, DIN-EN 12195,zinc-coated or powder-coated ratchets (on order).Sling in standard redcolour.

L

RTLE

L

1-part clamping strapwithout hook, standard length: 6,0 m Art. no. 240800

2-part clamping straps Standard length: 6,0 m (RT 0,3 + LE 5,7 m)

Ratchet type 2000, zinc-coated, STF 100 daN

Eye, whole width of strapArt. no. 240801

Toothed hookArt. no. 240813

Instructions for orders:

choose ending component andappropriate Art. no. Specify length of ratchet part andcounterpart (RT and LE).All clapming straps depicted in thecatalogue can be ordered also withprinting e.g. of your company or in othercolour.


120

Type Thickness Max. for Friction Standard Art. no. Art. no. VE**

(colour) of material [mm] load [kg] value [µ] proportions [mm]* GEWAbit GEWAbitPlus pcs

400 x 150 242140 242145 1500

bit (black) 3,5 7.500 0,84 800 x 150 242141 242146 500

1000 x 150 242142 242147 500

bitPlus (pink) 3 10.000 0,88 1200 x 150 242143 242148 500

1200 x 800 242144 242149 100

* max. thickness 1.500 mm **bigger package can be delivered on order.

GEWA - antiskid padsGEWA-antiskid pads prevents sliding and are also used for transport of special materials.When using antiskid pads the value of friction between load and loading surface is increased.

Thanks to antiskid pads the number of clamping implements used is lowered. Delivered insizes from 3 to 10 mm and in various materials, for the best solution it is necessary to knowtheir usage.

When using antiskid pads considercombinations of load according to validregulations VDI 2700 and DIN-EN 12195

Warning:Antiskid pads must not be used asprotection edges.

Thanks to surface decelerating sliding onsurface slipperiness of sling is lowered.

Combinations Values of friction µ in particular conditions

of materials dryness polluted wet greasy

Metal/wood 0,20-0,50 0,20-0,30 0,20-0,25 0,02-0,10

Metal/metal 0,10-0,25 0,10-0,20 0,10-0,20 0,01-0,10

Wood/wood 0,20-0,50 0,15-0,20 0,20-0,25 0,05-0,15

Wood/concrete 0,30-0,60 0,30-0,40 0,30-0,50 0,10-0,20

GEWAgum**>=0,6 0,50-0,60 0,30-0,40 0,50-0,60 unrecommended

**Values of friction up to µ 0,60 can be reached if the surface is entirely clean.

GEWAgum - antiskid pads, friction value µ 0,60available from 3 to 10 mm thickness of materialin following proportions:

Ausführung Art. Nr.

8 mm, coil, 5000 x 250 mm 241857

8 mm, 1 m2 241858

8 mm, cut pieces acc. to order 241859

GEWAbit-/GEWAbitPlus-antiskid pads

► For burdens up to 10.000 kg (concrete elements, pipes, castings, ...) ► Friction value max. 0,88 µ► Consecutive usage ► Beneficial to environment, no waste. Removal of waste - domestic waste.► bitPlus is designed for outdoor usage as well► We deliver other sizes, colours and designs also.

In most of the cases it isadvisable to use lower valuesof friction for calculations.

GEWAbit-, GEWAbitPlus-antiskid pad

GEWAgum-antiskid pads


121

Variations of hooks for clamping straps type 4000(Art. no. = complete clamping strap (ratchet part +counterpart) in standard lengths)


1000 25 mm STF 50 daN2000 35 mm STF 100 daN

Type 4000 50 mm5000 50 mm STF 250-700 daN

10000 50 mm10000 75 mm STF 500 daN

GEWA - clamping straps,DIN-EN 12195 galvanic orpowder coated ratechets. With hand safety lock onlever, high quality.Sling in standard orangecolour. Selection of ratchet designs

(NIRO-stainless ratchet on order)

STF 200 daNpressure ratchet, standard level(standard ratchet), zinc-coated Art. no. 241666Surface finishing, blue Art. no. 241667

STF 400 daNPressure ratchet, longer lever Art. no. 241673

STF 200 daNMultipurpose ratchet,Standard level Art. no. 241672

STF 200 daNSTF 400 daNSTF 550 daN

Palett hookArt. no. 240929

TriangleArt. no. 240926

L

RTLE

L

1-part clamping strapswithout hook, standard length: 8,0 m Art. no.240900

2-part clamping strapsStandard length: 8,0 m (RT 0,5 + LE 7,5 m)

EyetoothArt. no. 240914

Eyetooth with safety lockArt. no. 240946

Snap hook Art. no. 240907

Toothed wide hookArt. no. 240912

Triangle + hookArt. no. 240920

Snap hook evenArt. no. 240904

Snap hook flatArt. no. 240932

Eyetooth heavyArt. no. 240917


122

Instructions fororder:

Design:Art. no. written at hook.

RT and LE specify necessary lengthof ratchet part and counterpart.

Example:Art. no. 240920, 10 m, RT 0,8 m, LE 9,2 m, with ratchet241672 (multipurpose ratchet)

Colour of sling: orange other colours on order

Printing:„WANNER Ulm“ or e.g. name ofyour company.

Ratchet:Choose ratchet according to itspurpose. It is necessary to specify itin your order.

Without specifying we deliverstandard ratchet 241666.

Reminder:

STF values at ratchets and clampingstraps are based on distribution ofclamping means when fasteningload..

STF 400 daNMultipurpose ratchet,Longer lever Art. no. 241680

STF 400 daN2-stroke multipurpose ratchetLonger level Art. no. 241669


STF 400 daNMultipurpose ratchetuniversal and enhancedLonger lever Art. no. 241671

Other designs on order

Cant hook „LL“Art. no. 240951

Thicker eyeArt. no. 240938

Toothed hook revolvingArt. no. 240941

Delta ringArt. no. 240923

Lock into railLC 750 daNArt. no. 240935

Eye, whole width of slingArt. no. 240901


123

2000 35 mm STF 100 daN4000 50 mm STF 200-550 daN

Type 5000 50 mm10000 50 mm10000 75 mm STF 500 daN20000 75 mm

GEWA - clamping straps,DIN-EN 12195 galvanic orpowder-coated ratchets. With hand safety lock onlever.Sling in standard yellowcolour.


STF 250 daNSTF 500 daNSTF 700 daN

Variations of hooks for clamping straps type 5000(Art. no. = complete clampimg strap (ratchet part + counterpart) in standard lengths)

Selection of rachet designs(NIRO-stainless ratchets on order)

STF 250 daN

Preassure ratchet, standard levet (standard levet), zinc-coated Art. no. 241666Surface finishing, blue Art. no. 241667

STF 500 daNPressure ratchet Longer lever Art. no. 241673

STF 250 daNMultipurpose ratchetStandard lever Art. no. 241672

Palett hookArt. no. 241128

TriangleArt. no. 241125

L

RTLE

L

1-part clamping strap without hook, standard length: 8,0 m Art. no. 241100

2-part clamping strap Standard length: 8,0 m (RT 0,5 + LE 7,5 m)

EyetoothArt. no. 241113

Eyetooth with safety lockArt. no. 241138

Span hook Art. no. 241107

Toothed hook wideArt. no. 241110

Delta ringArt. no. 241122

Toothed hook heavyArt. no. 241116

Triangle + hookArt. no. 241119

Span hook evenArt. no. 241104


124

STF 500 daNRoll-ratchet, longer lever, pressure(without sling) Art. no. 241675

Toothed hook revolvingArt. no. 241134

Eye, whole width ofsling Art. no. 241131

Thickened eye Art. no. 241101

Important accessories:

GEWAprotection bands, -protectionedges and GEWAPUR.

Hook mounted onratchet directly - we deliver

various designs - on order

Instructions for order:

Design: Art. no. written at hook.

RT and LE specify necessary length ofratchet part and counterpart.

Example:Art. no. 240920, 10 m, RT 0,8 m, LE 9,2 m, with ratchet 241672(multipurpose ratchet)

Colour of sling: orange ► other colours on order

Printing:„WANNER Ulm“ or e.g. name of yourcompany.

Ratchet:Choose ratchet according to its purpose.It is necessary to specify it in your order.

Without specifying we deliver standardratchet 241666.

Other designs on order.

STF 500 daN2-stroke multipurpose ratchet

Longer lever Art. no. 241669

STF 500 daNMultipurpose ratchetuniversal, enhanced,longer lever Art. no. 241671


STF 700 daNMultipupose ratchet,Longer lever Art. no. 241674


125

Other designs of ratchets on order!

5000 50 mm10000 50 mm

Type 10000 75 mm20000 75 mm

Variations of hooks for clamping straps type 10000(Art. no. = complete clampimg strap (ratchet part + counterpart) in standard lengths)

GEWA - clamping straps, type 10000/75,DIN-EN 12195These straps boast verysturdy slings and othercomponents.Sling in standard redcolour.

Instruction for order:

Choose hook and specify Art. no.(written under picture of hook). Specify length of RT and LE.

STF 250-700 daN

STF 500 daN

Eyetooth Art. no. 241363 Toothed hook wide Art. no. 241367

Triangle + hook Art. no. 241354 Eye, whole width of sling Art. no.241351

We also offer clamping body andeyes

Notice:

GEWA - you can find sets of clamping chains in cataloque 7.

L

RTLE

L

1-part clampimg strapswithout hook, standard length: 8,0 m Art. no. 241350

2-part clamping strapsStandard length: 8,0 m (RT 1,0 m + LE 7,0 m)

Pressure ratchetSTF 500 daN Art. no. 241676



126

Sharp edge – Cause of damage no. 1

„Sharp edges“ do not have tomean that the edge is assharp as a razor.

Instructions to define a sharp edge as sharp.When the radius (r) is equal to or smallerthan diameter (d) of clamping implements(sling, chain, rope).

According to instructions clampingimplements must be protected against sharpedges.

GEWA protection bands and edges –optimal solution:with our PURTEX R - band, GEWA-edgesand pads.

r

d

PURTEX R-GRIP- band

* Standard length, other lengthsalso available

PS1 PS2

GEWA - protection bands

Protection bands are designed for protection ofslings against cuts and abrasions.

PURTEX R- pad under ratchet PURTEX R- protective plate

Sling mm Size* mm Art. no. Sling mm Size* mm Art. no.

25 mm 170 x 60 330850 25 mm 170 x 60 330850

35 mm 200 x 60 330851 35 mm 300 x 60 330852

50 mm 200 x 80 330815 50 mm 500 x 65 330814

75 mm 300 x 140 330853 75 mm 500 x 120 330817

100 mm 400 x 150 330854 100 mm 500 x 150 330855

ARS, Pes, PU- impregnated, inwardly rubbered ARS-tex, resistant against cutting through

Sling mm Size* mm Art. no. Sling mm Size* mm Art. no.

25 mm 200 260608 25 mm 200 260710

35 mm 250 260608 35 mm 200 260710

50 mm 500 260608 50 mm 500 260711

75 mm 500 260611 75 mm 500 260713

100 mm 500 260614 100 mm 500 260714

PURTEX R- band

Design / Art. no.

GRIP-band PURTEXR

PS1 PURTEXR

PS2

Sling mm Length* mm double-sided one-sided double-sided

25 mm 200 330201 330500 330510

35 mm 250 330201 330501 330511

50 mm 500 330202 330502 330512

75 mm 500 330203 330503 330513

100 mm 500 330204 330224 330354

Technical conditions:

Protective edges and bandsincrease grip of clamping means onedges of load. Necessary clampingforce will be reached quickly.


127

We can alsopresent to you

other protectionedges - on order.

Width of sling 20 mm Art. no. 241849Width of sling 40 mm Art. no. 241850

Width of sling max. 80 mm Art. no. 241851 Clip-protection edges, 50 mmbending, possible to extend Art. no. 241855

Width of sling max. 50 mm(different colour available) Art. no. 241853

Width of sling max. 100 mmstandard design Art. no. 241852

Width of sling max. 100 mmHeavy design Art. no. 241854

Big plastic protection edgeFor sling of max.width 50 mm Art. no. 241848

PE, orange, double, it is possible to cut itinto pieces,190 x 190 x 19 x 2000 mm Art. no. 241895

Ergonomic andair cushions - on order!Metal protection edgeFor sling of max. width 50 mm

Art. no. 241846inside covered by antiskid pad(similar picture) Art. no. 241847

Special protection odeges for paper industry

GEWA - protection edgesAs another possibility of effective and good clamping of protection we can introduce you to anassortment of our protection edges. Several variations and types are depicted here.

Standard protection edges


128

Notice:

All shorteners are equipped bysafety lock which prevents from slipof chain.

GEWA - clamping chainsVDI 2700, DIN-EN 12195-3, with screw lock and lockon shortener

Permitted

Nominal load Accessible Standard

Nominal diameter clamping force length L* Art. no.

size [mm] LC [daN] STF [daN] [mm]

LR-6S 6 2000 500 3000 135019 (on order)

LR-8S 8 4000 1000 3000 135020

LR-10S 10 6300 1575 3000 135021

LR-13S 13 10000 1500 3000 135022

LR-16S 16 16000 2400 3000 135018

made of high-strength chain, varnished black.* unrolled length of chain = length with closed strecher, high-strength chain, black varnished. the standard designs already mentioned are also available in other lengths and with othercomponents.

L

Clamping chain type LR

high-strength, quality class 8,completely mounted or you can assemble itby yourself.

Instructions:For assembly and usage of clampingchains norm DIN-EN 12195/VDI anddirection 2701 „Secure load on vehicles”are valid. In principle, a safety lock is apart of clamping chains with spindletensioner.

L

Technical notice:

Protection edges and bands increasesgrip of clamping means on edges ofload. Necessary clamping force will bereached quickly.

Ratchet tensionersENORM, type WSPwith built-in forked connecting link

Nominal Permitted Attainable

thickness- load clamping Applicable

Nominal of chain force length L Weigth

size [mm] LC [daN] STF [daN] [mm] [kg] Art. no.

WSP 6** 6 2800 1175 on order 130950

WSP 8 8 5000 2150 607-757 5,8 130951

WSP 10 10 8000 2720 661-811 8,8 130952

WSP 13 13 13300 3150 733-893 11,0 130953

**available also in shorter design.

zinc-coated

chain!zinc-coated

chain!

Chain - black varnished


129

Ratchet tencioners

DIN-EN 12195-3with removing safety lock and safety lock on shortener.**

Permitted

Chain tractive force Attainable Weigth

Nominal diameter tractive force Length L pcs

size [mm] LC [daN] STF [daN] [mm] min. [mm] [kg] Art. no.

R-6S 6 2240 550 410 70 1,6 130972

R-7S 8 4000 1000 550 150 4,5 130973

R-AS 10 6300 1575 620 130 5,4 130974

R-CS 13 10600 1500 690 110 8,4 130975

R-KS 16 16000 2400 784 130 13,3 130990

** no power reduction thanks to wide hooks. With safety lock on hook DIN-EN 12195

without hook, with eyes

Permitted


Nominal diameter tractive force Length L eye pcs

size [mm] LC [daN] STF [daN] [mm] min. [mm] Ø [mm] [kg] Art. no.

R-B 6 2240 550 205 75 15 1,2 130986

R-8 8 4000 1000 310 140 20 3,6 130987

R-D 10 6300 1575 315 135 20 3,6 130988

R-10 13 10600 1500 360 140 25 3,8 130993

R-LÖ 16 16000 2400 390 130 28 6,7 130991

without hook, with forked ending

Permitted


Nominal diameter tractive force Length L pcs

size [mm] LC [daN] STF [daN] [mm] min. [mm] [kg] Art. no.

R-13XL 13 13000 2600 445 230 8,4 130959

R-16XL 16 20000 3100 554 280 13,5 130960

L

L

L

Spindle tensioner

DIN-EN 12195-3

Permitted

load Attainable L L Weigth Art. no.

Nominal tractiveforce min. max. pcs (without safety

size LC [daN] STF [daN] [mm] [mm] [mm] [kg] chain)

GSP- 6 2000 1120 220 310 90 1,0 131169

GSP- 8 4000 2000 320 460 140 1,8 131170

GSP-10 6300 1850 460 700 240 3,3 131171

GSP-13 10000 2150 550 820 270 6,2 131172

GSP-13-XL 13000 2600 445 675 230 7,2 130957

GSP-16-XL 20000 3100 554 834 280 11,8 130958

Safety chain fitting in all sizes (DIN-EN 12195) 135004

L


130


GEWA - container netsPP green, with corded rim* =white

Size Diameter-ø Standard

of eyes size

[mm] [mm] [m] Art. no.

3,5 x 5,0 320371*

3,5 x 6,0 320372*

45 2,3 3,5 x 7,0 320373*

3,5 x 8,0 320374*

other sizes 320370*

3,5 x 5,0 320301

3,5 x 6,0 320302

45 3,0 3,5 x 7,0 320303

3,5 x 8,0 320304

other sizes 320300

3,5 x 5,0 320311

3,5 x 6,0 320312

45 4,0 3,5 x 7,0 320313

3,5 x 8,0 320314

other sizes 320310

3,5 x 5,0 320321

3,5 x 6,0 320322

100 4,0 3,5 x 7,0 320323

3,5 x 8,0 320324

other sizes 320320

PP black, fine container net, with corded rim

Size of eyes Diameter-ø Standard size

[mm] [mm] [m] Art. no.

3,5 x 5,0 320351

3,5 x 6,0 320352

20 1,8 3,5 x 7,0 320353

3,5 x 8,0 320354

other sizes 320350

3,5 x 5,0 320361

3,5 x 6,0 320362

30 1,5 3,5 x 7,0 320363

3,5 x 8,0 320364

other sizes 320360

Airy plastic tilts

Especially used for the transport of paper, sand, gravel and small items - against dispersion.Made of UV-resistant and airy material. Cloth has thickened rim and eyes are app. 0,5 mapart.

Weigth app. Standard size

Design [g/m2]] [m] Art. no.

3,5 x 5,0 320401

Cloth 3,5 x 6,0 320402

dark green 200 3,5 x 7,0 320403

3,5 x 8,0 320404

other sizes 320400

3,5 x 5,0 320411

Cloth 3,5 x 6,0 320412

black 240 3,5 x 7,0 320413

3,5 x 8,0 320414

other sizes 320410

Accessories for containertransport - tilts

Tilts-/nets-fixating rubber, Art. no.25 mm, with lock, green, length 1 m, pcs 319555

Rim and stretching stringline, strung1 m/perimeter

PP-stringline, 6 mm, orange 319550

PP-stringline, 8 mm, orange 319551

Rubber cord, 6 mm 319552

Rubber cord, 8 mm 319553

Selection of nets for containersand gravel vehicles

Size Gravel Size of container

vehicle

m 3

3,00 x 4,50 m 3-5 -

3,50 x 5,00 m 6-8 -

3,50 x 5,50 m 10 -

3,50 x 6,00 m 12 2,30 x 5,00 m

3,50 x 7,00 m 15 2,30 x 5,50 m

3,50 x 7,50 m - 2,30 x 6,00 m

3,50 x 8,00 m - 2,30 x 6,50 m

131

Rail system


GEWA - CARGOline-rail systemMultipurpose clamping system for passenger cars, small transporters and lorriesaccording to DIN-EN 12640 a 12195

Type S 20 A, Type SL, steel zinc-coated, aluminium Art. no. 242002 yellow immunized Art. no. 242000

GEWA - clamping straps for CARGOline-railsystemswith rail lock or ratchet, double-sided rail components Stud-Fitting

with rail lock (it is necessary to choose ending components)

with pressure ratchet, compact design (it is necessary to choose ending components)

Summary of CARGOline-rail systems*Technical data and .....

Usage

BW=floor Opening Length* Weigth Total width

Type Art. no. FB=floor [mm] [mm] [kg/m] [mm]

SL 242000 BW/horizont. 25 3000 2,8 132

S 20 242001 BW/horizont. 20 3000 2,3 129

S 20 A 242002 BW/horizont. 20 3000 0,97 132

WAJ-I 242004 FB/BW horiz. 20 2998 0,7 60

WAJ-R 242005 FB/BW horiz. 20 2998 0,55 34,5

WAJ-A 242006 BW/FB horiz. 20 2998 0,71 50

* other deisgns on order

Type S 20, steel zinc-coated, yellow immunized Art. no. 242001

Clamping strap 50 mm, LC 750 daN, withrail lock (only types S/SL)

Art. no. with rail lock 240322Art. no. with pressure ratchet 240935

Notice:Value LC daN means:permitted tractive force of clampingstrap in direct traction.

132

Carrying out examples

Medium security, two-sided forced on threads with turnbuckles.We recommend for length over 12m.

Article length L

End piece with thread End piece with thread

Article length L


End piece w

ith th

read

End piece w

ith th

read

Article le

ngth L

Article le

ngth L

Female thread

Female thread

End piece with thread

Female thread

End piece with fork

Article length

End piece with thread

Forced-in head with eye

Forced-on end piece

Forced-on end piece with flush head

Article length (turnbuckle is open on 1/2)

Article length

Thimble

Fork with hread

Eye with thread

Turnbuckle with fork

Thread is drive on 1/2

B

Article length L1

Article length L


Size of thread [mm]

M3 45

M4 50

M5 70

M6 80

M8 95

M10 100

M12 125

M14 140

M16 160

M20 180

Maximal tensing lengths.


133

INOX - Ropes

with steel inlay, stainless, acid-resistant steel wires according to AISI 316 or DIN type-Nr. 1.4401

Breaking force Weigth

Art. no. Rope Number calculated minimal 100 m

Ø [mm] of wires [kN] [to] [kN] [to] [ca./kg]

436781 0,62 7 0,4 0,04 0,37 0,04 0,2

404176 1 19 1,1 0,11 1 0,10 0,5

404177 1,5 19 2,4 0,24 2,2 0,22 1,1

404179 2 19 4 0,41 3,8 0,39 2

404180 2,5 19 6 0,61 5,8 0,59 3,1

404181 3 19 9 0,92 8,4 0,86 4,2




404185 1 3 x 4 0,6 0,06 0,5 0,05 0,4

421460 1 6 x 7 0,6 0,06 0,5 0,05 0,4

404186 1,5 6 x 7 1,6 0,16 1,4 0,14 0,8

404187 2 6 x 7 2,9 0,30 2,4 0,24 1,5

404189 2,5 6 x 7 4,3 0,44 3,6 0,37 2,2

404190 3 6 x 7 6,2 0,69 5,2 0,53 3,1

404194 4 6 x 7 10,9 1,11 9,1 0,93 5,5

404196 5 6 x 7 16 1,63 13 1,33 8,4

404197 6 6 x 7 24 2,45 19 1,94 13

429003 8 6 x 7 45 4,59 38 3,88 23




461596 2 6 x 19 2,3 0,23 2 0,20 1,5

404188 2,5 6 x 19 4,1 0,42 3,4 0,35 2,1

404191 3 6 x 19 7,3 0,74 5,8 0,59 3,6

404193 4 6 x 19 11,4 1,16 9,3 0,95 5,6

404195 5 6 x 19 16 1,63 12 1,22 8,1

404199 6,5 6 x 19 28 2,86 23 2,35 15

404200 8 6 x 19 44 4,49 36 3,67 23

404202 9 6 x 36 61 6,22 50 5,10 32

461210 10 6 x 36 72 7,34 56 5,71 42

Strand very elastic ropes, fine surface structurefor measuring devices, suspensions, winding, flag masts and sailboats

Strand very elastic ropes, rough surface structure for securing, banister, aerials and sailboats

Spiral stiff ropes, smooth surface structure for securing, banister, suspensions and sailboat

Large diameters of ropes on order. We deliver also coloured ropes.


134

C

B

A

DØ

Standard threads Long threads

Art. no. Art. no. Rope Type Proportions in mm Art. no. Art. no. Type Proportions in mm

clockwise anticlockwise [mm] A B C D clockwise anticlockwise A B C D

449580 449581 1 M4 35 20 4,0

449582 449583 2 M5 75 45 5,0

122700 122706 3 M M5 48 25 6,3

122922 122926 3 M M5 58 25 7,0 122938 122942 M M5 73 50 6,3

121831 125034 3 M6 97 48 7,0

122701 122707 4 M M6 59 30 7,5

122923 122927 4 M M6 75 30 8,5 122939 122943 M M6 89 60 7,5

121832 125036 4 M8 115 54 8,5

122702 122708 5 M M8 68 30 9,0

122924 122928 5 M M8 80 30 10,5 122940 122944 M M8 98 60 9,0

121833 125040 5 M10 128 61 10,5

122703 122709 6 M M10 84 40 12,5

122925 122929 6 M M10 105 40 14,0 122941 122945 M M10 124 80 12,5

121834 125053 6 M12 162 79 13,5

122704 122710 8 M M12 115 50 16,0

449428 449429 8 M12 120 30 13,0 122982 122984 M M12 165 100 16,0

121836 125054 8 M16 210 102 17,0

122705 122711 10 M M16 142 60 17,8

122980 122981 10 M M16 215 100 17,8 122983 122985 M M16 202 120 17,8

121837 125055 10 M20 215 105 18,5

461717 461718 12 M20 270 130 22,0

449430 449431 14 M22 290 140 25,0

449432 449433 16 M24 330 160 27,0


Impressed threads, standard type MMaterial: DIN 1.4301, various lengths of threads


135

Standard threads, type SM Long threads, type SM

Art. no. Art. no. Rope Proportions in v mm Art. no. Art. no. Proportions in mm

clockwise anticlockwise [mm] A B C D clockwise anticlockwise A B C D

122986 122988 2 M3 35 15 4,5

122930 122934 3 M4 45 20 5,4 125010 125105 M4 65 40 5,4

122931 122935 4 M5 52 25 6,5 125101 125106 M5 77 50 6,5

122932 122936 5 M6 63 30 7,5 125102 125107 M6 93 60 7,5

122933 122937 6 M8 68 30 9,0 125103 125108 M8 98 60 9,0

122987 122989 8 M10 88 40 12,5 125104 125109 M10 128 80 12,5


Impressed threads, type SMMaterial: DIN 1.4301, various lengths of threads

C

B

A

DØ

Rope

Art. no Art. no 6-strand Proportions in mm

clockwise anticlockwise Ø [mm] Type A B C D

460900 460901 2 M4 40 15 6

122946 122950 3 M M5 54 20 6,5

460904 460905 3 M5 100 35 7

122947 122951 4 M M6 62 20 7,5

460908 460909 4 M6 100 35 8

122948 122952 5 M M6 67 20 9

460912 460913 5 M6 100 35 8

122949 122953 6 M M8 82 25 12,5

460916 460917 6 M8 130 50 10

122954 122955 8 M M10 106 40 16

460918 460919 8 M10 180 60 13

460920 460921 10 M12 210 80 18

460924 460925 12 M16 250 100 25

460928 460929 16 M20 290 120 32

Impressed inner thread, type MMaterial: DIN 1.4301

B

C DØ

A


136

Art. no. Nominal RopeØ d2 d3 L1 L2 a s h

size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

127512 2 2 8 2,4 37 25 4,5 4 9

127513 3 3 10 3,5 43 32 5,5 5 11

127514 4 4 12 4,5 52 34 6,5 6 11

Rope construction:7 x 7 according to DIN 3055, 7 x 19 according to DIN 3060

Screw ending, type M with eye (DBGM)for mounting by customer, stainless

Art. Nominal RopeØ c d1 d2 d3 L1 L2 s h b

no. size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

127515 2 2 10,5 12 8 2,4 37 25 4,5 7 M4

127516 3 3 10,5 13 10 3,5 50 32 5,5 9 M4

127517 4 4 12,5 16 12 4,5 52 34 6,5 9 M5

Screw ending, type M with fork (DBGM)for mounting by customer, stainless


Right Left

thread thread Nominal Rope Ø Thread d2 d3 L1 L2 L3

Art. no. Art. no. size [mm] d1 [mm] [mm] [mm] [mm] [mm]

127500 127503 2 2 M4 8 2,4 50 25 20

127501 127504 3 3 M4 10 3,5 56 32 20

127502 127505 4 4 M5 12 4,5 65 34 25

478225 - 5 5 M5 14 5,5 105 65 40

478226 - 6 6 M6 14 6,5 105 65 40

Rope construction:7 x 7 according to DIN 3055, 7 x 19 according to DIN 3060

Screw ending, type M with outer thread (DBGM)right and left, stainless for mounting by customer

Right Left

thread thread Nominal Rope Ø Thread d2 d3 d4 L1 L2 L3

Art. no. Art. no. size [mm] d1 [mm] [mm] [mm] [mm] [mm] [mm]

127506 127509 2 2 M4 8 2,4 6 50 25 20

127507 127510 3 3 M4 10 3,5 6 56 32 20

127508 127511 4 4 M5 12 4,5 8 65 34 25

478275 - 5 5 M5 14 5,5 14 65 45 15

478276 - 6 6 M6 14 6,5 14 65 45 15

Screw ending, type M with inner thread (DBGM)right and left, stainless for mounting by customer

Componentsfor mounting by customer universal, fast and practical


137

Art. Nominal. Rope Ø d1 d2 d3 L1 L2 L3

no. size [mm] [mm] [mm] [mm] [mm] [mm] [mm]

122921 4 3+4 M6 12 4,5 70 40 25

122920 Rivet with thread M6 x 20 reduction for M4 x 50, Niro

Instruction for mounting:Control bore shows whether rope is embdded to the end.Rivets with thread shall be applied subsequently according to pictures (1, 2, 3).

Rope construction:7 x 7 during DIN 30557 x 19 during DIN 3060

Screw ending (DBGM)for mounting by customer, clockwise thread, stainless

1 2 3

Clamping

Art. no. and stratching Proportions in mm

case* set A B C

122890 122887 M4 60 80

122891 121810 M5 80 130

122892 121811 M6 90 140

122893 121812 M8 110 170

122894 121813 M10 120 190

122895 121814 M12 150 250

122896 121815 M14 170 270

122897 121816 M16 190 310

122898 121817 M20 220 400

122899 122888 M22 220 400

122900 122889 M24 220 400

* without safety nut (page 46)

Stretching lockMaterial: 1.4401

B

A

GAGantilockwise

SGGAGclockwise

Úponový napínák

C locked

Art. no. Art. no. Rope Proportions in mm

clockwise anticlockwise Ø [mm] A B C D E G

463621 463622 1 M4 40 7 9 5 20

461000 444920 2 M5 45 7 9 5 25

461001 444921 3/4 M6 52 8 8 6 30

461002 444922 4/5 M8 57 11 11 8 30

461003 444923 6 M10 77 12 13 9 40

461004 444924 8 M12 119 14 19 12 80

461005 444925 9 M14 129 14 19 12 90

461006 444926 10/11 M16 151 16 26 16 100

461007 444927 12/13 M20 191 20 38 19 119

larger proportions not mentioned can be ordered

Fork with outer thread (GEWA/GAG)Material: 1.4401

F

CE

A

D

G

B

Eyebolt with outer thread (OAG)Material: 1.4401

Art. no. Art. no. Rope Proportions in mm

clockwise anticlockwise Ø [mm] A B C D E F G H I

460966 460967 2 M5 12 61 3 5,5 7 54 36 18

460968 460969 3/4 M6 14 69 4 6,5 7,5 62 38 16

460970 460971 4/5 M8 17 84 5 8,5 8,0 76 50 24

460972 460973 6 M10 22 100 6 10 10 88 63 27

460974 460975 8 M12 25 118 8 12 13 105 75 30

460976 460977 9 M14 28 135 9 12 14 121 90 35

460978 460979 10/11 M16 31 150 10 14 16 134 100 40

460980 460981 12/13 M20 37 188 15 19 20 168 120 50


138

Art. no. Size in Proportions v mm

inches A B C D

120770 3/16 70 110 7 4

120771 1/4 90 140 10 5,5

120773 3/8 150 220 15 8,5

120774 1/2 200 280 19 11

120775 5/8 250 350 20 14

120776 3/4 305 450 28 17

Other sizes can be delivered on order.

Turnbuckle with two eyecMaterial: 1.4301

B closed

A

C

D

Short design Long design

Art. no.* Type Proportions in mm Art. no.* Type Proportions v mm

A B A B

122712 M/SM M4 40 122720 SM M4 80

122713 M/SM M5 50 122721 SM M5 100

122714 M/SM M6 60 122722 SM M6 120

122715 M/SM M8 60 122723 SM M8 120

122716 M/SM M10 80 - - - -

* without safety nut

Casing turnbuckle, type M/SMMaterial: 1.4401

B

A

Right-handed Left-handed

thread thread Nominal Thread L1 L3 h s b

Art. no. Art. no. size d1 [mm] [mm] [mm] [mm] [mm]

123610 123615 4 M4 40 20 9 7 5

123611 123616 5 M5 45 25 9 7 5

123612 123617 6 M6 52 30 8 8 6

123613 123618 8 M8 57 30 11 11 8

123614 123619 10 M10 77 40 13 12 9

Fork with thread, type Mfor right-and left-handed thread, outer thread


139

Rope

Art. no. 6-strand Proportions v mm

Ø [mm] A B C D E F

120460 2 4 12 M4 5 14 30

120461 3 6 14 M4 7 14 35

120462 4 8 18 M5 7 18 40

120463 5 10 20 M5 8 18 50

120464 6 12 24 M6 9 23 60

120465 8 17 30 M8 13 25 75

120466 10 21 35 M10 16 32 95

Construction of eyes with simplex or duplex clamp reaches only 40or 60% of minimal rope breaking power.

Duplex - clampsMaterial : 1.4301

BA

F

C

D

E

BA

F

C

D

E

Rope


Ø [mm] A B C D E F

120440 2 4 12 M4 5 14 15

120441 3 6 14 M4 7 14 17

120442 4 8 18 M5 7 18 20

120443 5 10 20 M5 8 18 25

120444 6 12 24 M6 9 23 30

120445 8 17 30 M8 13 25 37

120446 10 21 35 M10 16 32

Simplex - clampMaterial: 1.4301

Rope


Ø [mm] A B C D

463548 3 20 24 M8 4,2

463548 4 20 24 M8 4,2

463550 5 28 32 M10 6,2

463550 6 28 32 M10 6,2

Rope eye by means of cylinder clamp can be reached cca. 50% ofminimal rope breaking power.After reaching load, the clamp must to be tightened.

Cylinder clampMaterial: 1.4301

A

B

D C


140

C

Permitted load

at 5-fold

Art. no. Proportions in mm security

A B C D E [kg]

121190 5 5 10 10 17 320

121191 6 6 12 12 21 390

121192 8 8 16 16 28 500

121193 10 10 19 19 35 900

121194 11 12 24 23 41 1200

121195 13 13 26 26 45 1400

121196 15 16 32 31 55 2400

121197 18 19 38 38 66 3400

121198 21 22 44 45 76 4000

121199 24 25 50 50 87 6000

Catch shackleMaterial: 1.4401

Rope clamp

Art. no. Rope for each eye

Ø [mm] 1 piece

120360 2,0 3

120362 3,0 – 4,0 3

120364 5,0 – 6,0 4

120365 8,0 4

120366 10,0 4

120367 12,0 4

120368 14,0 4

120369 16,0 4

Construction of eyes with rope clamp reaches approx.80% of minimal value of rope breaking point. Ropeclamp must to be tightened after reaching load.

Rope clampMaterial : 1.4401

Art. no. Proportions in mm

A B

461012 25 4

461013 30 5

461014 40 6

461015 50 8

461016 60 10

Further proportions can be delivered perdemand.

Welded ringMaterial: 1.4401

B

A

E

A

B

D


141

A

C

C

A B

B

Art. no. Art. no. Rope

with alum. with Inox Ø Proportions in mm

casing casing [mm] A B C

461042 461043 2 30 10 4

461044 461045 3 45 15 6

461046 461047 4 60 20 8

461048 461049 5 75 25 10

461050 461051 6 90 30 12

461052 461053 8 120 40 16

461054 461055 10 150 50 20

461056 461057 12 180 60 24

461058 461059 14 210 70 28

461060 461061 16 240 80 32

Pressed eye (SG)Material: 1.4301 (breaking power: 90% of min. value of rope breakingpower))

Art. no. Art. no. Rope

with alum. with Inox Thimble Ø Proportions in mm

casing casing free [mm] A B C

461017 461018 120150 2 5,5 10 16

461019 461020 120151 3 6,5 11 17

461021 461022 120152 4 8 13 20

461023 461024 120153 5 9 16 25

461025 461026 120154 6 10 18 28

461027 461028 120155 8 12 20 32

461029 461030 120156 10 14 26 40

461031 461032 120157 12 15 28 45

461033 461034 120158 14 19 34 56

461035 461036 120159 16 22 37 62

Pressed thimble (KG)Material: 1.4301 (breaking power: 90% of min. value of ropebreaking power)


142

GEWA - safety net► Safety nets, DIN-EN1263-1

► Confirm by prescript BGR 179

► Colour - green (it can be delivered in other color),

sizes of eyes 100 mm, wide of material 5 mm

► It can be delivered with sizes of eyes 60 and 45 mm

► With syntetic border

► With handle or synthetic eye or without eyes

► We offer also standard sizes

Design:

With border rope without eye With handle With synthetic eyeSize [m] Art. no. Size [m] Art. no. Size [m] Art. no.

5 x 5 320181 5 x 5 320271 5 x 5 320281

5 x 10 320182 5 x 10 320272 5 x 10 320282

10 x 10 320183 10 x 10 320273 10 x 10 320283

oher sizes 320280 different sizes 320270 different sizes 320280

* Eyes are always in the corner and on the sides from 2,5m, completion of eyes is possible

Additional charge for minimal withdrawal

Size of net under 5m2 + 100% add. charge under 10m2 + 35% add. charge under 20m2 + 20% add charge

Accesories for mounting and maintanace of nets:

Safety carabinefailure load min. 22kNArt. no.: 344 013

Handle of safety netsteel, free, DBGMArt. no.: 320 262

Suspension ropecca 12mm, 1 eye, 2,5 m length, loads min. 30 kNArt. no.: 320 245

Fire-stopping carabinefailure load min. 18kNArt. no.: 121 497

BagPE - material, cca 60 x 100 cmArt. no.: 320 246

Cross ropecca 12mm, white, failure load min. 30 kNArt. no.: 320 241(reel 220 cm, shorter length + 100% add.charge

Net - rope connectioncca 10 mm, white, failure load min. 15 kNArt. no.: 320 263(reel 220 m, shorter length + 100 % add.charge

Important:By mounting of nets take natice of prescript BGR179. Requests send to our mounting service forsafety nets.


143

GEWA - safety net► Safety nets, DIN-EN1263-1, system U

► Confirm by prescript BGR 179

► Colour - green (it can be delivered in other color), size of eyes 45/60/100 mm

► Tied-up side rope

► Standard sizes not only available

► Net set with fastening strap or clip (on order)

Design:

Size of net Material Color Size of eye[m] [mm] 45[ mm] 60 [mm] 100 [mm]

1,5 x 5,0 5 green 320201 320221 320241

2,5 x 5,0 5 green 320202 320222 320242

1,5 x 10,0 5 green 320203 320223 320243

2,0 x 10,0 5 green 320204 320224 320244

others sizes 5 green 320200 320220 320240

Additional charge for min. withdrawal (except of higher presented standard sizes)Size of net under 5m2 + 100% add. charge under 10m2 + 35% add. charge under 20m2 + 20% add charge

Accesories:

Rope connection8mm, white, free enclosedArt. no.: 274 608coil 220 mshorter length + 100% add. charge

Isilink - clip(DBGM), 600 mm of lengthy,free enclosed, blackArt. no.: 320 264100 pcs

Fast clamping strap25 mm, white, free enclosedwith aluminium lock,600 mm of lengthyArt. no.: 240 100

Important:By mounting of nets takenatice of prescript BGR 179.

ImportantNext accesories of nets-system (complet net-walls,pieced-up klips, piece up ofcourt locks...) we deliver onorder.Technical changes reserved.

144

GEWA - scaffold protection► Protection against powder

► Masking

► used not only in agriculture

► Different quality and design

► Standard design is in roles, treatment on order possible

GEWA - scaffold protection, type 75 gmonofilament, in the lengthwise side and in the middle isinweaved the polyester sewing, with 5cm buttonholes

Size of net Weigth Art. no. Art. no. Art. no.[m] [g/m2] green color white color blue color

2,57 x 50 75 320450 320451 320452

3,07 x 50 75 320455 320456 320457

monofilament, in both lengthwises is separetly and inthe middle is double inweawed polyester sewing, with5 cm buttonholes

Size of net Weigth Art. no. Art. no[m] [g/m2] green color blue color

2,57 x 10 75 320460 320470

2,57 x 20 75 320461 320471

3,07 x 10 75 320462 320472

3,07 x 20 75 320463 320473

Desing - rolls

GEWA - scaffold protection, type 130 gespecially dustproof - permeability only 10%, veryresistant against rupture

Size of net Weigth Art. no.[m] [g/m2] green color

2,57 x 50 130 320480

3,07 x 50 130 320481

Desing - rolls

GEWA - scaffold protection, type 36 g/200 gin rolls, PE, with UV stabilization

Size of net Weigth Color Art. no.[m] [g/m2] green color

2,95 x 100 36 green 320485

4,10 x 100 200 light green 320486

4,10 x 100 200 dark green 320487

Important:

As well in color orange, redand yellow

Desing - rolls

Desing - rolls

Safety strap for protectionsheetslength 300 mm,

Art. no.: 320267, package per 100 pcs

Isilink-klips (DBGM)highstrengthly3 mm, 300 mm of legthy


Isilink-klips (DBGM)highstrengthly4 mm, 300 mm of legthy



145

GEWA - universal nets► PP highstrengthly, without kinkles, square eyes, with border skirt

► Usage for staircase, galleries, playgraounds, nets for eton fives, nets for birds, separate

nets for storehouses, agriculture, craftsman and industries

Size Mate- Max. Weight Different Colour / Art. no.rial force design

[mm] [mm] [kN] [g/m2]

10 1,5 0,25 150 diagonal 320500

20 1,0 0,20 50 320562 320563 320650

20 1,5 0,25 80 320564

20 1,8 0,60 130 320505 320504

20 2,3 0,80 180 320522 320507 350506 320669

25 1,8 0,60 100 320542 320670

30 1,0 0,20 30 320565 320566 320651

30 1,5 0,25 50 320501 320658

30 1,8 0,60 85 320567

30 2,3 0,80 90 320672 320539

30 4,0 1,60 330 320524

35 3,0 1,10 230 polyester 320600

35 4,0 2,00 350 polyester 320604

45 2,3 0,80 90 320511 320510 320508 320509 320540

45 3,0 1,10 185 polyester 320601

45 3,0 1,25 150 320515 320559 320514 320671 320526 320530 320569 320575 320576 320652

45 3,5 1,40 200 320516 320519

45 4,0 1,60 210 320654 320570 320525 320527 320541 320529

45 4,0 2,00 285 polyester 320605

45 5,0 3,20 400 320673 320546 320545 320547 320548 320655

50 1,0 0,20 20 320571 320572

50 1,5 0,25 35 320674

50 5,0 3,20 350 320677

60 1,5 0,25 30 320502

60 5,0 3,20 350 320675 320549 320550

70 5,0 3,20 275 320551

100 1,5 0,25 15 320503

100 2,3 0,80 50 320676 320513 320573

black white green dark

green

violet orange blue yellow red others

black white green dark green violett


146

Rope laddersRope ladder from PPN rope

Characteristic Basic length [m] Colour Art. no.

diameter 16 mm, complet with three 1,00 orange 370260wooden spokes cca. 30 cm apart 45 cm wide, 2 eyes with thimble 1,00 blue 370261and 2 hanks 8x 40 mm at the top

Rope ladder from hemp


diameter 16 mm, complet with three wooden spokes cca. 30 cm apart 1,00 hemp colour 37026245 cm wide, 2 eyes with thimble (natural)and 2 hanks 8x 40 mm at the top

Rope ladder from polyamid rope


diameter 16 mm, complet with three wooden spokes cca. 30 cm apart 1,00 white 37030545 cm wide, 2 eyes with thimbleand 2 hanks 8x 40 mm at the top

Rope ladder from nylon rope with steel insert


diameter 16 mm, complet with three woodenspokes cca. 30 cm apart 1,00 blue 37026345 cm wide, 2 eyes with thimbleand 2 hanks 8x 40 mm at the top

Rope ladder from zinc-coated rope with steel insert


5 mm DIN 3060 SE, aluminium spokes45 cm wide, grooved profile, 280 mm apart, length of brace max. 1m - 18m colour of rope 370264160 mm, 240 kg of load(max. 3 persons)


147

AGU 10One-point fullbody harness withrear attachement point. Completelyadjustable.

Art. no.

WME10075

AGU 20Three-point fullbody harness withrear attachment point and twosupplementary front points.

Art. no.

WME10076

AGU 90 / AGU 90 SThree or four-point fullbody harness withintegrated safety belt. One rear attachment point+ 2 safety points, 1 supplementarymountaineering point. (AGU 90 S)

Art. no.

AGU 90 WME10080

AGU 90 S WME11878

AGU 30Two-point fullbody harness withfront and rear attachment points.

Art. no.

WME10077

Standard fullbody harnessesLight, easy to wear, quickly adjustable about the bredth of a 45 mm polyester sling

FalconTM with revolving carabinerand two screw-lock carabiners

Length: Art. no.

1,75 m W1011270

FalconTM with revolving carabiner andbearing hook (63 mm)

Length: Art. no.

1,9 m W1011530

TM

GEWA - belay devices for work in heigth

These are the lightest fall arresters on market (from 1 kg) with compact plasticcover, sling and motion radius from 1,75m to 1,9m. Fall absorbers are simultane-ously accepted as anti-fall indicators. Material of leading rope - 15mm polyamidsling covered with teflon.

These products are CE certifi-cation holders and correspondwith EN360 norm.


148

ME02Art. no.: W1002903

ME05Art. no.: W1004590

ME52Art. no.: W1002907

Lanyard with energy absorber

Double-sideanchorage

Lanyard with energy absorberType length 12 mm 23 mm Connection element Connection element Reference No.

[m] rope sling

ME00 1,8 • no no W1002901

ME02 2 • ML00 ML00 W1002903

ME03 2 • ML06 ML06 W1002904

ME05* 2 • ML00 2 x 63 mm W1004590bearing hook

ME06 1,5 • ML00 63 mm W1005279bearing hook

ME06 2 • ML00 63 mm W1004579bearing hook

ME51 2 • ML00 63 mm aluminium W1002906bearing hook

ME52 2 • ML00 ML00 W1002907

AMORSTOP 1,5 • ML00 ML00 W1003216

ME53 2 • ML00 22 mm W1004578automatic carabine

ME53 1,5 • ML00 22 mm W1005290automatic carabine

ME54 2 • ML00 50 mm W1004591automatic carabine

ME54 1,5 • ML00 50 mm W1005278automatic carabine

AMORSTOP 2 • ML00 63 mm W1003215automatic carabine

AMORSTOP 1,3 • no no W1003220


slings

Documents

gewa binding ropes dinen

strand rope

polystrandbinding ropes

relativerelations of

endless ropes n

method of fastening

pressed ep21strand

pressed rope loopsangle