slayer brothers parts catalog 2018slayerbrothers.com/catalog.pdf · cab latches – part 1 55-lh...

Where we cut prices not quality

Parts Catalog2018

Slayer Brothers, LLC Copyright © 2012-2018 All rights reserved. Updated 1/22/18

Slayer Brothers, LLCP.O. Box 55

Carlton, MN [email protected]

https://www.ebluejay.com/store/slayerbrothersSlayer Brothers / ebay

218-409-9116888-249-0220

Slayer BrothersSlayer Brothers

Catalog 2018-1This catalog supersedes previous catalogs

mailto:[email protected]

http://www.slayerbrothers.com/

https://www.ebluejay.com/store/slayerbrothers

https://www.ebay.com/sch/slayerbrothers/m.html?_ipg=50&_sop=12&_rdc=1

INDEX1. INDEX

Section A. Door & Hatch Hardware3-4. Handles – EXTERIOR & INTERIOR5-7. Cab Latches8. Hinges & Holders9. Miscellaneous

Section B. Wiper Motors, Blades & Hardware11-12. Wiper Motors13. Wiper Parts & Window Washer Kits14. Wiper Arms15. Wiper Blades

Section C. Electrical17. Lights & Switches18. Radio Housings & Fans

Section D. Rubber & Vinyl Parts20. Door & Window Molding

Section E. Helpful Data / Data Guide22-37. Line Drawings28. Wiring Diagrams – Wipers29. About Us - FAQ

TERMSPayment:We accept PayPal, Visa, MasterCard, Discover and company check. Shipping:Parts shipped USPS. Part prices do not include shipping except when noted.Returns: No returns without prior authorization. No returns on special order items, sale items or electrical parts.MISCELLANEOUS:Slayer Brothers, LLC is not responsible for nondelivery or delay in delivery due to delays, damages or losses resulting from strikes, riots, fires, floods, or other accidents or occurrences beyond their control. Prices are subject to change without notice. Newest catalog version supersedes all others.DRAWINGS: All drawings and dimensions shown on this website are for reference only.

To order, please contact:218-409-9116 or 888-249-0220

[email protected]

Page 1 Slayer Brothers, LLC Copyright © 2012-2017 All rights reserved. Updated 7/1/17

Slayer Brothers, LLC Copyright © 2012-2017 All rights reserved. Updated 1/7/17

Section A Door & Hatch

Hardware

www.slayerbrothers.com

You can buy many of our parts online.https://www.ebluejay.com/store/slayerbrothers

Slayer Brothers / ebay



HANDLES Exterior

NL1 Non-locking exterior door handle. Features a chrome finish, 5/16” shaft and 1 ¾” bolt hole spacing.CASE part number 3113466R91. Ford & New Holland part number C9NN94501N22A.Same as GD302 handle.

$18.95 each

L1 Locking exterior door handle. Features a chrome finish, 5/16” shaft, 1 3/4” bolt hole spacing and two keys. CASE part number F93131 and D88771. ASV part number is 0304-483.Same as GD303 handle.

$18.95 each

PLZN Padlock locking exterior door handle. Features a 5/16” shaft and hole for padlock. Zinc finish. Same as 5655ZN handle.

Drawing available in Data Section.

$20.95 each

L1.5 Locking exterior door handle with 1 1/2” bolt hole spacing. Features a chrome finish, 5/16” shaft and two keys.

Fits a number of old tractors. Replaces Minneapolis Moline 303305937 and CAT 188-6230.

$25.95 each

DHG1 Gasket. Exterior gasket for NL1 and L1 exterior handles. It is supposed to work on the L1.5 handles, but is a little too narrow to seal well.

$2.95 each


HANDLES Interior

354-I Inside door handle. Features chrome finish and Allen locking screw. Fits all 5/16”, 44mm or .31 shafts. CASE part number F63925. Same as I8002.

$9.95 each

74-I Inside door handle. Features chrome finish, Allenlocking screw and large curved design for better grip when pulling the door shut. Fits all 5/16”, 44mm or .31 shafts. Replaces CASE #E83236.

$16.95 each

200-I Inside handle. Features chrome finish, Allen locking screw and compact design. Small inside handle is perfect for windows, hatches, panels or half-doors. It's 3 1/2” long so a little small for a full-sized door. Fits all 5/16”, 44mm or .31 shafts.

$5.95 each

D88773 Inside door handle. Fits CASE brand doors that use the D88773 inside handle. Accepts a 5/16” square shaft outer handle. No longer in production so we are one of the few companies that have them.

Drawing available in Data Section.

$18.95 each

DHG1 Gasket. Exterior gasket for NL1 and L1 exterior handles and D88773 interior handle.

$2.95 each


CAB LATCHES – Part 1

55-LH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown. CASE / IH part number is F93204. ASV part number is 0304-482.Drawing available in Data Guide section.

$19.95 each

55-RH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Right hand shown. CASE / IH part number is F93203. ASV part number is 0402-883.Drawing available in Data Guide section.

$19.95 each

58-LH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. This gives the 58 more versatility. It can also be used without an inside handle as a panel latch. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown.

$13.95 each

58-RH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. Replaces WHITE and MF part # 30-3305945, and 731761. Casedimensions are roughly 2”x3 3/8”. Zinc finish. Right hand shown. These also fit older JEEP aftermarket cabs.

$13.95 each

55A-LH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Left hand shown.

Drawing available in Data Guide section.

$31.95 each

55A-RH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Right hand shown.


$31.95 each

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.



58-CASE Cab Latch. The 58-CASE cab latch replaces Case part number F98122 and F89710. I havealso used it to replace CASE part number F93107. Dimensions are roughly 2”x3 3/8”. Zinc finish.


$25.95 each

9015 Paddle Handle Latch. Features a key lock, insidehandle with override. Has four mounting holes. Case dimensions are roughly 3 5/8”x4 3/4”. Polished stainless steel. Includes inside knob.


$25.95 each

4901 Paddle Handle Latch. Features a key lock and inside knob. Case dimensions are roughly 4 1/4”x5 1/2”. Unpolished stainless steel. Rubber gasket available.


$21.95 each

I-4901 Paddle Handle Latch. Features a key lock and inside override handle. Case dimensions are roughly 4 1/4”x5 1/2”. Zinc finish. Rubber gasket available.


$35.95 each




G-4901 Gasket. Rubber gasket to fit the 4901 and the I-4901 paddle handle.

$5.95 each

STR-1 Strike plate. Two position strike plate offers greater safety cab latches and paddle latches. (Not for rotary latches.) Has slotted holes for adjustment.

$5.95 each

11442-16LH Rotary Cab Latch. Also sold as 10374-15-30 and CASE R55001. Left hand shown. Complieswith FMVSS 206 when tested with approved striker.NSN #2540012478640


$44.95 each

11443-16RH Rotary Cab Latch. Also sold as 600518 and CASE R55000. Zinc finish. Right hand shown. Complies with FMVSS 206 when tested with approved striker. NSN #2540012478641


$44.95 each

R55002 Rotary Cab Latch. Factory CASE NH part number R55002. Replaces F44925, 47109305, 4495165, 254177A1, 44995165 and 302660A1. Fits many of the new dozers and the W14B. Zinc finish. NSN #2540013298572.

$44.95 each

R55003 Rotary Cab Latch. Factory CASE NH part number R55003. Fits many of the new dozers and the W14B. Zinc finish. NSN#2540012993988

$44.95 each

10646-16 Striker bolt. Approved striker bolt for 11442-16LH, 11443-16RH, R55002 and R55003 latches.

$11.95 each



HINGES & HOLDERS

120G 120mm weld-on hinge with grease zerk.

See Data section for mounting options.

$10.95 each

120W Replacement washer. $1.95 each

150G 150mm weld-on hinge with grease zerk.

See Data section for mounting options.

$15.95 each

150W Replacement washer. $1.95 each

Other sizes and styles available by special order.

35SS Stainless steel cane bolt. Can be used for left or right side mounting. Perfect for holding doors, panels or windows. Base is 3.5” long.

$21.95 each

5602.5ZN Heavy duty door holder. Spring loaded, all metal door holder with grease zerk. For holding doors open against the side of the cab.


$39.95 each

PDH-S Steel door stop/holder. Comes with both pieces and the rubber insert. Silver in color. Has less holding power than the 5602 holder. Similar to factoryCase holder.

$9.95 each

RDS-238 Rubber door stop. 2 3/8” long with 3/8” stud. Comes with nut and washer.

$12.95 each


MISCELLANEOUS

13X5SS Polished stainless steel grab handle. Perfect for cab door or wall post. 1/2” diameter by 13.25” long. Has 4 mounting holes. It's nice!

$15.95 each

MCR Switch mounting cup. Allows you to install a switch into the dash with access to the wiring. Makes putting a switch into a dash panel easy work.

$6.95 each


The unwise man is awake all night

worries over and again.When morning rises he is restless still,

his burden as before.

- The Havamal (Book of Viking Wisdom)


Section B Wiper Motors, Blades

& Hardware






WIPER MOTORS - 1

Universal 2-Speed 12 Volt Wiper Motor

Marine grade 12 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right or left. Wiper switches available on the switch page. Uses 1/2” drum arms. This wiper motor was usedon a wide variety of OEM equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper motors. This is a “famous maker” wiper motor we purchased directly from the factory to save you money! Comes with complete instructions.

K4R1.12 / 12 volt 2-speed wiper motor with 1 1/2” shaft $84.95 each

Universal 2-Speed 24 Volt Wiper Motor

24 volt 2-speed wiper motor features an adjustable wipe angle and will park to the right or left. Wiper switches available on the switch page. Uses 1/2” drum arms. This wiper motor was used on a wide variety of OEM equipment and aftermarket cabs. It also replaces WEXCO and AFI wiper motors. Thisis a “famous maker” wiper motor we purchased directly from the factory to save you money!

K4R1.24 / 24 volt 2-Speed wiper motor with 1 1/2” shaft. $79.95 each

Detailed wiper motor information is available in the Data Guide section.Switches available in the Electrical Section.


WIPER MOTORS - 2

WWJ3 Wiper Motor Kits 12 & 24 Volt

2-speed wiper motor kits. Comes with the motor bracket, connecting link, clips, nuts and screws as shown. Available in 12 or 24 volt. Adjustable wipe angle. Coast to park. Uses 3/8” arm spline. Order cranks, pivot shafts, arms, blades, switches and washer kits on the following pages.

Detailed wiper motor information is available in the Data Guide section.

KMB131 / 12 volt kit $ CALL KMB132 / 24 volt kit $ CALL

Marine Wiper motor 12 volt


WIPER PARTS

Parts for WWJ3 Wiper Motors

300795 1.25” Pivot Shaft $33.95 each 308-1005 Adj. Drive Arm Kit $29.95 each

Note: Other shaft lengths and drive arms are available by special order.

200241 Pantograph Adapter. 1.25” center to center pivot distance$24.95 each

WMC1 Wiper motor cover that fits all Wexco, AFI and other wiper motors. Gives your dash a cleaner look. $25.95 each

Windshield Washer Parts

12WS Washer Kit / 12 Volt $25.95 each WK1 Wet Kit $21.95 each

24WS Washer Kit / 24 Volt $25.95 each Converts your dry wiper arm to a wet arm. May vary from photo shown1.5 liter bottle with pump and bracket


WIPER ARMS

For 1/2” Drum SplinesFits many factory motors plus Wexco, Bosch and AME using the 1/2” drum.

Adjustable radial arm with J-hook end. Length and end section adjusts for a perfect fit. Uses our Universal Wiper Blades.

200717D 14”-18” Radial Arm $31.95 each 200718D 20”-24” Radial Arm $39.95 each

Adjustable pantograph arm with 13.6mm saddle end. Length adjusts for a perfect fit. Uses our OEM Wiper Blades. No adapter needed!

200715D 13”-19” Panto Arm $41.95 each 200716D 19”-24” Panto Arm $41.95 each

For Double Flat Shaft with 3/8” Tapered SpinesFits bracketed style wiper motors, UT/JE, Bosch, WEX, J3, etc.

201559 16” Radial Dry $35.95 each 201561 20” Radial Dry $37.95 each

201560 18” Radial Dry $36.95 each

200461 16” Panto Dry $Call each 200464 22” Panto Dry $52.95 each

200462 18” Panto Dry $50.95 each 200467 28” Panto Dry $54.95 each

200463 20” Panto Dry $51.95 each


WIPER BLADES

Narrow Saddle Mount Blades

Fits .200 and .250 width arms used on many older tractors.

N14 14” Blade $14.95 each

Other sizes available by special order

OEM - 13.6 mm Saddle Mount Blades

Fits 13.6mm width arms used as OEM on trucks, buses and newer heavy equipment.

13416 16” Blade $20.95 each 13422 22” Blade $25.95 each




Universal Mount Blades

Fits a variety of mounts including J-hook.

UNV16 16” Blade $8.95 each UNV20 20” Blade $8.95 each

UNV18 18” Blade $8.95 each


Washers, wet kits, switches and wiper motors are available


Bare is his back who has no brother.

- Grettir's Saga


Section C Electrical






LIGHTS & SWITCHES

S1-1224 12 volt/24 volt LED flood light. Heavy duty aluminum body with stainless mounting hardware. Light is 4”x4” with 16 LED's, 48 watts and a 60 degree flood pattern. Mounting area needed is 5”x6”.

This light will work on 12 or 24 volt systems.

$24.95 each

311-2 Round wiper switch. For one or two 12 volt or 24 volt wiper motors. Includes washer position.

Wiring information in Data section.

$28.95 each

RS1 Lighted Rocker Switch. For one or two 12 volt or24 volt wiper motors. For 24 volt you must use a 600 ohm resistor to keep the internal LED light from burning out.


$25.95 each

WS1 Lighted Washer Switch. For 12 volt or 24 volt washer pumps. For 24 volt you must use a 600 ohm resistor to keep the internal LED light from burning out.


$19.95 each

WMS Wiper motor switch. This 2-speed switch attaches directly to your Wexco, AFI or Slayer Brothers wiper motor. For 12 or 24 volt motors. (Wiper motor not included)


$19.95 each

SS1224 Universal Push Button Starter Switch. Rated for 60 amps at 12 volts and 24 amps and 24 volts. Fits a 5/8” hole with a panel thickness of up to 1/2”. Same as John Deere AT25258.

$11.95 each


RADIOS HOUSINGS & FANS

76 Series Radio Housing. This roof mounted housing comes complete with heavy duty speakers for industrial use. Perfect for tractor, dozer or any heavy equipment cab. Just add your own radio and external antenna. Accepts DIN style radios (without knobs).

$79.95 each

77 Series Radio Housing. Roof mounted or under dash housing holds 2-shaft and DIN radios or can be used to house a CB radio.

$19.95 each

12 volt high quality 7” fan with built-in switch2 speedsAll metal construction.6 amp on low, .9 amp on high

24 volt high quality 7” fan with built-in switch2 speedsAll metal construction.6 amp on low, .9 amp on high

$35.95

$45.95


Ill it is when men, with smooth talk, sidestep what is just and good.

- Heitharvega Saga


Section DRubber & Vinyl Parts






MOLDING

DOOR MOLDING

ST-5/8 Straight bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a straight seal.

$3.90 per foot

90-5/8 90° bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a 90° seal.

$3.90 per foot

Many other profiles are available upon request! Minimum special order is only 25'.

WINDOW MOLDING

AS987 Window Rubber. For mounting 1/4” safety glass or polycarbonate into cab skin. Fits skin thickness of 12-16 gauge.

Drawing available in the Helpful Data Section at the end of the catalog.

$3.90 per foot

Many other profiles are available upon request! Minimum special order is only 25'.


Wisdom is welcome wherever it comes from.

- Bandamanna Saga


Section EHelpful Data

NOTE: All drawings and dimensions shown in this catalogare for reference only.


You can now buy many of our parts online day or night!https://www.ebluejay.com/store/slayerbrothers




HELPFUL DATA – Part 1


HELPFUL DATA – Part 2

What latch do I need? As you approach the door from the outside, if the hinge is on the left, it shouldtake a left hand latch. Always match your hardware to the photos and drawings to make sure

because there are exceptions to every rule!


HELPFUL DATA - Part 3


WIRING DIAGRAMS - Wipers


ABOUT US - FAQ

Our low prices are achieved by ordering parts in very large quantities and paying our suppliers upfront. It's how we do business.

Q. Who can order from Slayer Brothers, LLC?A. We are happy to sell to individuals or businesses and there is no minimum order.

Q. Why do you publish your prices when other companies don't?A. We charge one price to everyone. Prices are posted so you don't have to wait for quotes

or wonder if your competitor is getting a better deal than you are. Please note that our parts sold onlineat eBlujay and ebay are priced slightly higher because they include free shipping.

Q. What catalog items do you carry in stock?A. If it's in the catalog, it's in stock or will be back in stock soon unless noted.

Q. I need an item but it's not in your catalog, can you help?A. In many cases we can. Call or email with your request.

Q. How often is your catalog updated?A. As often as I can get it done!

Q. Do you have a printed catalog?A. No. You can currently view our catalog online or

download it to your computer.

Q. What options do you offer for shipping?A. We ship by USPS and UPS. Flat Rate Priority Mail is currently

the cheapest and fastest option for parts if you can provide a mailing address.

Our office staff will exhaust itself finding you a great deal on parts!




slayer brothers parts catalog 2018slayerbrothers.com/catalog.pdf · cab latches – part 1 55-lh...

Documents