sl qstat 100 - evoltecevoltec.pl/wp-content/uploads/2018/10/leaflet_sl-qstat... · 2018. 11. 7. ·...
TRANSCRIPT
-
SL Qstat 100
-
THE WAY TO MAKE IT | PRECISE
User-friendly & reliable
Technical data:
• Large graphical LCD display• Measuring range: 0 - 1000 N• Measuring units: N, Kgf, Lbf• Speed: 25, 50, 100 mm/min.• Accuracy: < 1% of full range• Resolution: 0,1 N
Transfer of crimp
specifications to
Qstat 100
Transfer of crimp
results to Qpex RS-232
Features:
• Multi-language support• Visualisation of pull force profile• Job queue status button for browsing of outstanding quality verification job sent by Qpex-CFM
Connectivity:
• Through serial communication interface the Qstat 100 allows external micrometer to be connected for crimp height/crimp width measurements. A one stop quality station for wire harnessing shop floor • Fully integrated with Qpex crimp force monitoring system to retrieve quality validation data of crimp connection specification via LAN/WiFi, to prevent production of wrong specification crimp connection
Software:
• SL Qstat PC-Software – matched to your device
• Connectivity: Mitutoyo micrometer• Network: RS 232 serial communication Ethernet LAN/WiFi• Power supply: 85-265 VAC; 50 Watt• Dimensions (LxWxH): 180 x 90 x 360 mm• Weight: ca. 10 kg
Hand actuated pulltester can give inconsistent data depending on the operator pull rate. The IEC stan-dard specifies that a pulltester should measure with a consistent pull rate.Qstat 100 is a motorized bench top pulltester equipped with a PWM speed controller, ensuring consistent pull speed throughout the entire measuring range; a wide spectrum of crimp connections as well as ultra-sonic welded connections can be tested using the 12 position standard terminal holder.
-
SLE quality engineering GmbH & Co. KGJosef-Buchinger-Straße 994481 GrafenauGermanyPhone +49 8552 9640 0www.sleqe.com