sinov ap1000 asterisk ippbx user manual
DESCRIPTION
Contact CherryJiang: [email protected] [email protected] skype: live:sinovoip whatsapp:+8613411986228TRANSCRIPT
AP100 User Manual
www.sinovoip.com.cn1
SinoVoip AP1000 Hardware Development Platform
User's Manual
AP100 User Manual
www.sinovoip.com.cn2
AP1000_4FXO/FXS
AP1000_8FXO/FXS
AP1000_1 E1/T1
AP1000_2 E1/T1
AP100 User Manual
www.sinovoip.com.cn3
AP1000 is an ideal for small and medium hardware development platform, whichis based on the integration of Asterisk IPPBX solutions, plug plate design by precludethe use of a modular,In a small chassis, it integrates a variety of communication interface imports,
including analog access of imported FXO / FXS, digital access of imported E1 / T1.
AP1000 hardware development platform supports comprehensive protocolprocessing, which is installed in the Linux-based operating system, and completelyopen to the developers , developers on this platform is very easy to do secondarydevelopment, to provide more value-added services unique.
AP1000 hardware platform overall Introduction1, AP1000 hardware platform is composed of three parts as embedded boards,bus adapter plate &Asterisk voice card .
DC +12V
Power inputVGA Ethernet
port1
Plug voicecard
USB1 USB2
Ethernet
port 2
RS232
AP100 User Manual
www.sinovoip.com.cn4
Power LED
HDD indicator
light
FXO/FXS 1thindicate
FXO/FXS 2ndindicate
FXO/FXS 3rdindicate
FXO/FXS 4thindicate
FXO/FXS7th indicate
FXO/FXS6th indicate
FXO/FXS 8th
indicate
FXO/FXS 5thindicate
AP100 User Manual
www.sinovoip.com.cn5
Embedded mainboard
Hard dishThe bus adapter plate
Voice card
RAM
AP100 User Manual
www.sinovoip.com.cn6
Plug in and pull outguide rail
Plug in and pull outguide rail
Voice card have 4kinds
AP1000_4FXO/FXS
AP1000_8FXO/FXS
AP1000_1 E1/T1
AP1000_2 E1/T1
AP100 User Manual
www.sinovoip.com.cn7
2、Embedded Motherboard Specifications
CPU Processor:Intel® Celeron® Processor 1037U (2M Cache, 1.80 GHz) RAM:2GB DDR3 SDRAM (Maxim can expand to 8GB) Hard dish capacity: 500G 2 USB2.0 connector 2 100Mbps Ethernet interface imports 1 VGA connector 1 232 serial port
AP100 User Manual
www.sinovoip.com.cn8
AP1000_4FXO / FXS voice card introduction
1. Support Quad FXO or FXS, and FXO and FXS can choose anycombination ,red module is FXO, green module is FXS.
2. Driver layer totally compatible with Asterisk card, we can enjoy Rourcecode security and stability.
3. No need additional installation drivers, to avoid potential risks. Asteriskcomes complete with DAHDI / Zaptel driver (wctdm24xxp driver, no needto install any patches
4. Support Linux, BSD operating system, CentOS, openSUSE, Fedora,Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD.
5. Base on DMA read and write data on technology to support fast datatransfer, significantly reducing the CPU usage of the computer.
6. Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.
7. Using pluggable architecture, very easy to replace.8. In order to prevent loosening during transport modules, each one module has afixed column with base plate closely linked, very reliable.
1thconnector
2ndconnector
3rdconnector
4th
connector 1th module2ndmodule
3rd module4th module
AP100 User Manual
www.sinovoip.com.cn9
9, After loading the drivers are OK, the front four LEDs L1, L2, L3, L4 isilluminated
Fixed leg Fixed leg Fixed leg Fixed leg
AP100 User Manual
www.sinovoip.com.cn10
AP1000_8FXO / FXS voice card introduction
1.Support eight FXO or FXS, and FXO and FXS can choose any combination, redmodule is FXO, green module is FXS.
2.Driver layer is fully compatible with Asterisk card, enjoy Rource code securityand stability3.No need additional installation drivers, to avoid potential risks. Asterisk comes
complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need to installany patches).
4.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.
5.Base on DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.)
1th connector
2nd connector
3rd connector
4th connector
5th connector
6th connector
7th connector
8th connector
3rd module
4th module
2nd module
1th module
5th module
7th module
6th module
8th module
AP100 User Manual
www.sinovoip.com.cn11
6.Supports A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex Codec ADPCMformat.
7.Using pluggable architecture, very easy to replace.8.In order to prevent loosening during transport modules, each one module has a
fixed column with base plate closely linked, very reliable.)
9, After loading the drive normal, positive eight LEDs L1, L2, L3, L4, L5, L6, L7, L8lights up.
Fixed leg Fixed leg Fixed leg Fixed leg
Fixed leg Fixed leg Fixed legFixed leg
AP100 User Manual
www.sinovoip.com.cn12
AP1000_1 E1 / T1 voice card introduction
1.It supports one E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP / ISUP),PRI, R2 and other signaling.
2.Supports the industry-standard telephony and data protocols, including SS7signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.3.Driver layer is fully compatible with Asterisk card, we can enjoy Rourcecode security and stability.4.No need additional installation drivers, to avoid potential risks. Asterisk
comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need toinstall any patches
5.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.)
6. DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.)
7.Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.
8.Via PCB board dial switch to select E1 and T1 mode.9.Using pluggable architecture, very easy to replace.
Choose E1/T1 by Dial
swith
AP100 User Manual
www.sinovoip.com.cn13
AP1000_2 E1 / T1 voice card introduction
1.Support second Road E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP /ISUP), PRI, R2 and other signaling.)
2.Supports the industry-standard telephony and data protocols, including SS7signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.)3. Driver layer is fully compatible with Asterisk card, enjoy Rource codesecurity and stability.4.No need additional installation drivers, to avoid potential risks. Asterisk
comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need toinstall any patches
4.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.
5.Base on DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.)
6.upport codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.
7.Via PCB board dial switch to select E1 and T1 mode.8.Using pluggable architecture, very easy to replace.
Choose E1/T1 by Dial
swith
AP100 User Manual
www.sinovoip.com.cn14
AP1000 hardware development platform use method
1. AP1000 packaging, size 410mm X 430mm X 70mm
AP100 User Manual
www.sinovoip.com.cn15
2, Open the packaging AP1000
Power line AP1000 hardware +12V DC adapter
AP100 User Manual
www.sinovoip.com.cn16
3.Different countries use different standard power supply, AP1000 offers
two power lines, customer need to determine what kind before buying .
EU Power supply
China Standard power supply
AP100 User Manual
www.sinovoip.com.cn17
4.1PCS DC+12V 6A Power adapter
5.Steps of install the system1)Display via VGA interface to access AP1000.2)USB keyboard via USB1 interface to access AP1000.3)USB drive or U disk via USB2 interface to access AP1000.4)AP1000 embedded motherboard uses the power easyable start, as long as a
power plug adapter insert AP1000, AP1000 embedded motherboards will startup.
5)Embedded motherboards boot AP1000 hardware platform, there are three mainways, SATA hard drives, USB drives and U disk.
A) power plug adapter insert AP1000 hardware platform, press Del or Delete
key immediately, the Del key in the bottom right corner of the keyboard, and
some may use the delete key instead of this, as below
After enter BIOS, default is Main (Main Menu)interface, as below
AP100 User Manual
www.sinovoip.com.cn18
B) Then use left right keys to move the cursor to the BOOT this option to
enter the interface shown in Figure:
AP100 User Manual
www.sinovoip.com.cn19
C) Hard Drive BBS priorities of the inserted hard disk detection options, press
Enter to enter this sub-menu, such as inserting multiple hard drives, you can
choose which specific hard disk boot.
D) USB Device BBS priorities of the inserted USB device detection options
such as USB U disk, USB drive, USB other storage devices, Enter to enter
this sub-menu, select the device you want to start. Show as below
AP100 User Manual
www.sinovoip.com.cn20
E) BOOT Option # 1 first boot device BOOT Option # 2 second boot device
BOOT Option # 3 The third boot device
AP100 User Manual
www.sinovoip.com.cn21
F) After setting press F4 to save and exit. YES Enter.
6)System ShutdownWhen the system is turned off by way of software, the screen went blank,Please be Noted, AP1000 hardware platform and not a total blackout,pluggable voice card can not be implemented at this time, it is necessaryto dial down power plug adapter, AP1000 hardware platform was a totalblackout, now can pluggable voice card (Charged pluggable voice card
may be damaged AP1000 hardware platform).
AP100 User Manual
www.sinovoip.com.cn22
Only after pull out power adapter, the power LEDwill offer, then AP1000 can totally power cut, andthen plug and pull out the voice card (or it willdamage AP1000
AP100 User Manual
www.sinovoip.com.cn23
For example: AP1000 hardware platform, insert a AP1000_2FXO + 2FXS voicecard, install Elastix
Here is dahdi_hardware, dahdi_scan tool detects results
dahdi_cfg Loading configuration
AP100 User Manual
www.sinovoip.com.cn24
The following channels was saw on dahdi show channels under asterisk cli. Differentmodules configured with different results, do not represent all configurations. Forexample 2FXO, 2FXS of channels
For example 4FXO channel